[at581x] Apply configured false and zero values in the settings action

Signed-off-by: dependabot[bot] <support@github.com>

.agents/skills/code-review/SKILL.md

@@ -0,0 +1,116 @@
+---
+name: code-review
+description: Review guidance for ESPHome pull requests. Use this when reviewing a pull request that changes ESPHome Python, C++, or component code, to check it against the project's coding conventions, embedded-systems memory rules, testing requirements, and breaking-change policy.
+---
+
+# Reviewing ESPHome pull requests
+
+ESPHome parses YAML into C++ firmware for memory-constrained microcontrollers
+(ESP32, ESP8266, RP2040, LibreTiny). Review changes with that in mind: RAM and
+flash are scarce, and code runs unattended for months.
+
+`AGENTS.md` in the repository root is the full contributor guide and the
+authority when it disagrees with this summary. The developer documentation at
+https://developers.esphome.io explains the component lifecycle and the reasoning
+behind these rules. This skill lists the concrete things worth flagging in a
+review; read `AGENTS.md` for the detail behind any item.
+
+Only raise findings that the diff actually introduces or changes. Do not ask for
+drive-by cleanup of pre-existing code the PR did not touch.
+
+## Memory and embedded constraints (highest value)
+
+Heap allocation after `setup()` is treated as a reliability bug, not a
+performance nit, because it fragments a small shared heap. Flag:
+
+- New heap allocation on a hot path or after setup that could be avoided.
+- `std::vector` where the size is known at compile time (use `std::array`, or
+  `StaticVector<T, N>` when a `push_back` API is needed) or fixed at runtime
+  init (use `FixedVector<T>`).
+- Listener / child-entity registration lists stored as `std::vector`; these have
+  a compile-time-known count and should use `cg.slot_counter()` plus
+  `StaticVector`.
+- `std::vector<uint8_t>` for a byte buffer that never grows: prefer
+  `std::unique_ptr<uint8_t[]>` or `std::array`.
+- `std::map` / `std::set` / `std::unordered_map` for small datasets (1-16
+  elements): a `std::vector` of a small struct with linear search is lighter.
+- `std::deque` anywhere: it allocates 512-byte blocks and should be avoided.
+- `std::string` storing a value set once from config: prefer `StringRef` (the
+  literal already lives in flash).
+- `std::string` / `std::to_string` / string-returning helpers on hot paths where
+  a buffer or view API exists.
+
+## C++ conventions
+
+- Include what you use: a file referencing a symbol must include the header that
+  declares it, even if it currently arrives transitively. New or changed uses of
+  a symbol need the matching include.
+- Prefix all member access with `this->`.
+- Naming: `lower_snake_case` for functions/methods/variables, `UpperCamelCase`
+  for classes/structs/enums, `UPPER_SNAKE_CASE` for namespace-scope constants,
+  trailing underscore on protected/private fields.
+- `enum class` values must be prefixed with the enum name in `UPPER_SNAKE_CASE`
+  (e.g. `UARTFlushResult::UART_FLUSH_RESULT_SUCCESS`). Bare names like `SUCCESS`,
+  `FAIL`, or `OK` collide with SDK macros on some platforms and break the build.
+- Prefer `const`/`enum` over `#define`; `#define` is only for conditional
+  compilation and code-generation sizes.
+- Never call `millis()` in a `loop()` body; use
+  `App.get_loop_component_start_time()`. A rate-limit gate below ~16 ms (the loop
+  period) does nothing.
+- Pick the timing primitive by cadence: gated `loop()` under 250 ms,
+  `set_interval` at 500 ms and above.
+- Do not override a base method to return the value it already returns (e.g.
+  `get_setup_priority()` returning `setup_priority::DATA`).
+- Wrap string literals passed as printf `%s` args in `LOG_STR_LITERAL()`.
+- Required, invariant dependencies should be constructor parameters, not setters.
+- Callback registration methods must be templated (`template<typename F>`), not
+  typed as `std::function`, so lightweight forwarders avoid a heap allocation.
+- Two-space indent, `using` over `typedef`, wrap at 120 columns.
+
+## Python conventions
+
+- Type-annotate every new function signature (params and return), new dataclass
+  fields, and new module-level variables. Import `ConfigType` from
+  `esphome.types`.
+- Use the walrus operator to avoid a double lookup, e.g.
+  `if (blah := config.get(CONF_BLAH)) is not None:`.
+- Reuse existing validators from `config_validation.py` (`cv.rename_key`,
+  `cv.has_exactly_one_key`, etc.) via `cv.All(...)` instead of hand-rolling.
+- `esphome/const.py` is frozen: no new `CONF_` constants there. Define them in
+  the component's own `.py`, or in `esphome/components/const/__init__.py` when
+  shared. The same constant defined in three or more component files fails CI.
+- State that must persist during code generation goes in `CORE.data` namespaced
+  under the component `DOMAIN` (a `@dataclass`), not module-level mutable globals.
+- Prefer callback-based triggers via `build_callback_automation()`; only use a
+  `Trigger<Ts...>` subclass when the forwarder needs mutable state.
+
+## Testing and coverage
+
+- New and changed lines and branches need test coverage, including defensive
+  early-returns, error paths, and no-op guards. A mocked-out function is not
+  covered; exercise the real call path too.
+- Component YAML tests live in `tests/components/<component>/`. Never define
+  buses (uart, i2c, spi, modbus) directly in a test file: pull them from
+  `tests/test_build_components/common/` through dict-style `packages:` so CI can
+  group builds. List-style packages or top-level merge keys block grouping.
+- Config-only checks use the `validate.*.yaml` prefix; compiled checks use
+  `test.*.yaml`.
+
+## Breaking changes and public API
+
+- Base classes under `esphome/core/` and documented config options are public
+  API. Undocumented `public` members of a component are internal.
+- A breaking change needs justification, a migration path in the PR description,
+  and a deprecation window where feasible (`ESPDEPRECATED` in C++,
+  `cv.rename_key(..., removed_in=...)` in Python). Changing a codegen-injected
+  lambda signature is not a breaking change.
+
+## Process and PR hygiene
+
+- PR titles start with a `[tag]` prefix: the component name (e.g. `[uart] ...`)
+  or `[core]` for shared code.
+- Prose in docs, comments, and commit messages should be plain English. Keep
+  inline comments short and only where the code is not self-explanatory; do not
+  restate what the code says.
+- Verify the PR fills out `.github/PULL_REQUEST_TEMPLATE.md` and adds
+  `CODEOWNERS` entries for a new component.

.claude/skills

@@ -0,0 +1 @@
+../.agents/skills

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -9,6 +9,29 @@ body:
         If you have a feature request or enhancement, please [request them here instead][fr].
 
         [fr]: https://github.com/orgs/esphome/discussions
+  - type: markdown
+    attributes:
+      value: |
+        ## Use of AI in bug reports
+
+        AI tools are good at carrying out well-defined tasks, but they are not good at troubleshooting.
+        Please do NOT paste an AI-generated wall of text into the issue template - if the AI hasn't solved
+        your problem, its wild guesses are not likely to help.
+
+        Please DO include your own words and observations, compile/boot logs, and
+        especially a minimal reproducible example of your YAML configuration that demonstrates the problem.
+
+        It is however quite acceptable to use AI to translate your *own* report,
+        if you aren't a competent English speaker.
+
+        If you really think it will be useful to include an AI's analysis, preferably wrap it in a `<details>` block which will be collapsed by default.
+
+        If you are using AI to help solve a problem, rather than asking it to speculate about what the problem is,
+        it can be more useful to ask it to create a step-by-step troubleshooting procedure.
+        AI is also useful for generating boilerplate code, such as a minimal reproducible example of your YAML
+        configuration that demonstrates the problem.
+
+        Used properly, AI can be a useful tool to help you solve your problem, but don't let it get in the way.
   - type: textarea
     validations:
       required: true

.github/actions/build-image/action.yaml

@@ -42,7 +42,7 @@ runs:
 
     - name: Build and push to ghcr by digest
       id: build-ghcr
-      uses: docker/build-push-action@53b7df96c91f9c12dcc8a07bcb9ccacbed38856a # v7.3.0
+      uses: docker/build-push-action@c3c9e263c25d99ce0380d002d59b67737d91b0dc # v7.4.0
       env:
         DOCKER_BUILD_SUMMARY: false
         DOCKER_BUILD_RECORD_UPLOAD: false
@@ -67,7 +67,7 @@ runs:
 
     - name: Build and push to dockerhub by digest
       id: build-dockerhub
-      uses: docker/build-push-action@53b7df96c91f9c12dcc8a07bcb9ccacbed38856a # v7.3.0
+      uses: docker/build-push-action@c3c9e263c25d99ce0380d002d59b67737d91b0dc # v7.4.0
       env:
         DOCKER_BUILD_SUMMARY: false
         DOCKER_BUILD_RECORD_UPLOAD: false

.github/actions/restore-python/action.yml

@@ -32,7 +32,7 @@ runs:
       # detects the activated venv via ``VIRTUAL_ENV`` so the venv layout
       # downstream jobs rely on is preserved.
       if: steps.cache-venv.outputs.cache-hit != 'true'
-      uses: astral-sh/setup-uv@20cfd1bf945f4377ade1205e4dbc17946fc9a30d # v10.0.1
+      uses: astral-sh/setup-uv@bec219d24cd3e171d82865faccec33120bb574f4 # v10.1.0
       with:
         enable-cache: true
         # Pull request saves land in per-PR scopes nothing else can

.github/skills

@@ -0,0 +1 @@
+../.agents/skills

.github/workflows/ci-api-proto.yml

@@ -29,7 +29,7 @@ jobs:
       - name: Set up uv
         # ``--system`` (below) installs into the setup-python interpreter;
         # no venv is created or restored by this workflow.
-        uses: astral-sh/setup-uv@20cfd1bf945f4377ade1205e4dbc17946fc9a30d # v10.0.1
+        uses: astral-sh/setup-uv@bec219d24cd3e171d82865faccec33120bb574f4 # v10.1.0
         with:
           enable-cache: true
           # Pull-request-only workflow: a save could never be shared and

.github/workflows/ci-docker.yml

@@ -67,7 +67,7 @@ jobs:
         with:
           python-version: "3.12"
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@37fe631027851001ddb9b187196cc803df7f5f0e # v4.3.0
+        uses: docker/setup-buildx-action@594f3bf4285d9ea8dc53c9a0c9c4092420091003 # v4.4.0
 
       - name: Determine tag and whether to push
         id: tag
@@ -159,7 +159,7 @@ jobs:
         with:
           python-version: "3.12"
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@37fe631027851001ddb9b187196cc803df7f5f0e # v4.3.0
+        uses: docker/setup-buildx-action@594f3bf4285d9ea8dc53c9a0c9c4092420091003 # v4.4.0
 
       - name: Log in to the GitHub container registry
         uses: docker/login-action@dbcb813823bdd20940b903addbd779551569679f # v4.6.0

.github/workflows/ci.yml

@@ -49,7 +49,7 @@ jobs:
         # detects the activated venv via ``VIRTUAL_ENV`` so downstream jobs
         # that ``. venv/bin/activate`` see an identical layout.
         if: steps.cache-venv.outputs.cache-hit != 'true'
-        uses: astral-sh/setup-uv@20cfd1bf945f4377ade1205e4dbc17946fc9a30d # v10.0.1
+        uses: astral-sh/setup-uv@bec219d24cd3e171d82865faccec33120bb574f4 # v10.1.0
         with:
           enable-cache: true
           # Pull request saves land in per-PR scopes nothing else can
@@ -244,11 +244,20 @@ jobs:
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Read prek version from requirements_test.txt
+        id: prek
+        # requirements_test.txt is the only place the version is pinned, so a
+        # Dependabot bump there is picked up here without a second edit.
+        run: |
+          if ! version=$(sed -nE 's/^prek==([^[:space:]#]+).*/\1/p' requirements_test.txt) || [ -z "$version" ]; then
+            echo "::error::No prek== pin found in requirements_test.txt."
+            exit 1
+          fi
+          echo "version=$version" >> "$GITHUB_OUTPUT"
       - name: Run prek
         uses: j178/prek-action@4e14d07f9231acabce116ccfca13b13dd9755ece # v3.0.0
         with:
-          # Keep in sync with requirements_test.txt.
-          prek-version: "0.4.11"
+          prek-version: ${{ steps.prek.outputs.version }}
           # This job only runs on pull requests, so nothing ever populates
           # the cache on dev. Every run would miss and then write a per-pull
           # request copy, which is what the old seed-cache job existed to
@@ -312,7 +321,7 @@ jobs:
           . venv/bin/activate
           pytest -vv --cov-report=xml --tb=native --durations=30 -n auto tests --ignore=tests/integration/
       - name: Upload coverage to Codecov
-        uses: codecov/codecov-action@fb8b3582c8e4def4969c97caa2f19720cb33a72f # v7.0.0
+        uses: codecov/codecov-action@303a32d7a59b442fa8d48b6a1cc6825c09c847a5 # v7.1.1
       - name: Save Python virtual environment cache
         if: github.ref == 'refs/heads/dev'
         uses: actions/cache/save@55cc8345863c7cc4c66a329aec7e433d2d1c52a9 # v6.1.0
@@ -341,7 +350,7 @@ jobs:
       - name: Check out code from GitHub
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
       - name: Report empty upload to Codecov
-        uses: codecov/codecov-action@fb8b3582c8e4def4969c97caa2f19720cb33a72f # v7.0.0
+        uses: codecov/codecov-action@303a32d7a59b442fa8d48b6a1cc6825c09c847a5 # v7.1.1
         with:
           run_command: empty-upload
           force: true
@@ -404,7 +413,7 @@ jobs:
       - name: Set up uv
         # Only needed on cache miss to populate the venv.
         if: steps.cache-venv.outputs.cache-hit != 'true'
-        uses: astral-sh/setup-uv@20cfd1bf945f4377ade1205e4dbc17946fc9a30d # v10.0.1
+        uses: astral-sh/setup-uv@bec219d24cd3e171d82865faccec33120bb574f4 # v10.1.0
         with:
           enable-cache: true
           # Pull request saves land in per-PR scopes nothing else can
@@ -1265,7 +1274,7 @@ jobs:
         # install step (order-of-magnitude faster on cold boots,
         # with its own wheel cache). actions/setup-python still
         # provides the interpreter.
-        uses: astral-sh/setup-uv@20cfd1bf945f4377ade1205e4dbc17946fc9a30d # v10.0.1
+        uses: astral-sh/setup-uv@bec219d24cd3e171d82865faccec33120bb574f4 # v10.1.0
         with:
           enable-cache: true
           # Pull request saves land in per-PR scopes nothing else can

.github/workflows/codeql.yml

@@ -56,7 +56,7 @@ jobs:
 
       # Initializes the CodeQL tools for scanning.
       - name: Initialize CodeQL
-        uses: github/codeql-action/init@cdf488f595d80d6e07e03d4674febd5ab45fa938 # v4.37.9
+        uses: github/codeql-action/init@1c5b675653bb5c22dbe9b12b556ec555138e09fd # v4.38.1
         with:
           languages: ${{ matrix.language }}
           build-mode: ${{ matrix.build-mode }}
@@ -84,6 +84,6 @@ jobs:
           exit 1
 
       - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@cdf488f595d80d6e07e03d4674febd5ab45fa938 # v4.37.9
+        uses: github/codeql-action/analyze@1c5b675653bb5c22dbe9b12b556ec555138e09fd # v4.38.1
         with:
           category: "/language:${{matrix.language}}"

.github/workflows/lock.yml

@@ -14,4 +14,4 @@ jobs:
     permissions:
       issues: write         # issues.lock on closed issues
       pull-requests: write  # issues.lock on closed pull requests
-    uses: esphome/workflows/.github/workflows/lock.yml@0fdd5e311b7e744069166696072a1a9cbc5fbeb6  # 2026.8.1
+    uses: esphome/workflows/.github/workflows/lock.yml@cc3e76de337dc59bc1cba8da58d963cd23b873f1  # 2026.9.0

.github/workflows/release.yml

@@ -123,7 +123,7 @@ jobs:
           python-version: "3.12"
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@37fe631027851001ddb9b187196cc803df7f5f0e # v4.3.0
+        uses: docker/setup-buildx-action@594f3bf4285d9ea8dc53c9a0c9c4092420091003 # v4.4.0
 
       - name: Log in to docker hub
         uses: docker/login-action@dbcb813823bdd20940b903addbd779551569679f # v4.6.0
@@ -202,7 +202,7 @@ jobs:
           merge-multiple: true
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@37fe631027851001ddb9b187196cc803df7f5f0e # v4.3.0
+        uses: docker/setup-buildx-action@594f3bf4285d9ea8dc53c9a0c9c4092420091003 # v4.4.0
 
       - name: Log in to docker hub
         if: matrix.registry == 'dockerhub'

.github/workflows/stale.yml

@@ -16,7 +16,7 @@ jobs:
     # No GITHUB_TOKEN permissions: the reusable workflow mints an ESPHome
     # GitHub App token so the labels, comments and closures come from
     # esphome[bot] instead of github-actions[bot].
-    uses: esphome/workflows/.github/workflows/stale.yml@a1c1485ab46ef41a84a6a9d8abd7fa4b7628fd70  # main
+    uses: esphome/workflows/.github/workflows/stale.yml@cc3e76de337dc59bc1cba8da58d963cd23b873f1  # main
     secrets:
       ESPHOME_GITHUB_APP_PRIVATE_KEY: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
     with:
@@ -33,7 +33,7 @@ jobs:
         and will be closed if no further activity occurs within 7 days.
 
         If you are the author of this PR, please leave a comment if you want
-        to keep it open. Also, please rebase your PR onto the latest dev
+        to keep it open. Also, please merge the latest dev branch into your
         branch to ensure that it's up to date with the latest changes.
 
         Thank you for your contribution!

.github/workflows/sync-dependency-versions.yml

@@ -0,0 +1,94 @@
+# Keeps pre-commit hook revs in sync with the requirements files.
+#
+# Dependabot only bumps the pins in requirements*.txt. Some of those tools
+# are pinned again as hook revs in .pre-commit-config.yaml. This workflow
+# runs script/sync_dependency_versions.py against the pull request branch
+# and pushes a commit with the revs updated.
+
+name: Sync dependency versions
+
+on:
+  # pull_request_target rather than pull_request so the App secret is
+  # available on Dependabot pull requests (pull_request runs opened by
+  # Dependabot only see Dependabot secrets). The job below only touches
+  # branches in this repository and only ever executes the script from the
+  # base branch checkout, so fork code never runs with the token.
+  pull_request_target:
+    types: [opened, synchronize, reopened]
+    paths:
+      - requirements_dev.txt
+      - requirements_test.txt
+      - .pre-commit-config.yaml
+      - script/sync_dependency_versions.py
+
+# The push to the pull request branch uses the App token minted below, so
+# the workflow's GITHUB_TOKEN does not need any scopes.
+permissions: {}
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
+  cancel-in-progress: true
+
+jobs:
+  sync:
+    name: Sync pinned versions
+    runs-on: ubuntu-latest
+    # Same-repository branches only: a push to a fork is not possible with
+    # this token, and it keeps untrusted heads out of a privileged job.
+    if: >-
+      github.repository == 'esphome/esphome'
+      && github.event.pull_request.head.repo.full_name == github.repository
+    steps:
+      - name: Generate a token
+        id: generate-token
+        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
+        with:
+          client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
+          private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
+          # A push made with the workflow's own GITHUB_TOKEN would not start
+          # CI on the new commit; a push with the App token does.
+          permission-contents: write  # git push of the sync commit to the pull request branch
+
+      - name: Check out base branch
+        # Provides the script that runs below. Deliberately the base branch
+        # so the pull request cannot change what executes here.
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+        with:
+          ref: ${{ github.event.pull_request.base.sha }}
+          persist-credentials: false
+
+      - name: Check out pull request branch
+        # No allow-unsafe-pr-checkout here on purpose: checkout v7 only
+        # refuses heads that live in a different repository, and the job
+        # condition above already limits runs to same-repository branches.
+        # Leaving it off keeps that refusal as a backstop for fork heads.
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+        with:
+          ref: ${{ github.event.pull_request.head.ref }}
+          path: pull-request
+          token: ${{ steps.generate-token.outputs.token }}
+
+      - name: Set up Python
+        uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97 # v7.0.0
+        with:
+          python-version: "3.12"
+
+      - name: Install yamlrocks
+        # The script edits YAML through yamlrocks. Take the pin from the
+        # base branch requirements so this workflow has no copy of its own.
+        run: pip install "$(grep -E '^yamlrocks==' requirements_test.txt | cut -d'#' -f1)"
+
+      - name: Sync pinned versions
+        run: python script/sync_dependency_versions.py --root pull-request
+
+      - name: Push changes
+        working-directory: pull-request
+        run: |
+          if git diff --quiet; then
+            echo "All pinned versions already match the requirements files."
+            exit 0
+          fi
+          git config user.name "esphome[bot]"
+          git config user.email "115708604+esphome[bot]@users.noreply.github.com"
+          git commit -am "Sync pinned tool versions with requirements files"
+          git push

.github/workflows/sync-device-classes.yml

@@ -47,7 +47,7 @@ jobs:
         # setup-python interpreter so subsequent ``prek`` /
         # ``script/run-in-env.py`` steps find the deps without a
         # ``uv run`` prefix.
-        uses: astral-sh/setup-uv@20cfd1bf945f4377ade1205e4dbc17946fc9a30d # v10.0.1
+        uses: astral-sh/setup-uv@bec219d24cd3e171d82865faccec33120bb574f4 # v10.1.0
         with:
           enable-cache: true
           # Pin uv version so the action does not have to fetch the

.pre-commit-config.yaml

@@ -1,7 +1,6 @@
 ---
 # See https://pre-commit.com for more information
 # See https://pre-commit.com/hooks.html for more hooks
-
 ci:
   autoupdate_commit_msg: 'pre-commit: autoupdate'
   autoupdate_schedule: off  # Disabled until ruff versions are synced between deps and pre-commit
@@ -11,7 +10,7 @@ ci:
 repos:
   - repo: https://github.com/astral-sh/ruff-pre-commit
     # Ruff version.
-    rev: v0.16.3
+    rev: v0.16.8
     hooks:
       # Run the linter.
       - id: ruff
@@ -42,7 +41,7 @@ repos:
       - id: pyupgrade
         args: [--py312-plus]
   - repo: https://github.com/adrienverge/yamllint.git
-    rev: v1.37.1
+    rev: v1.38.0
     hooks:
       - id: yamllint
         exclude: ^(\.clang-format|\.clang-tidy)$

AGENTS.md

@@ -431,7 +431,17 @@ file does, and it is the authority when they disagree. The most useful starting
           MyComponent *parent_;
         };
         ```
-        Register with `@automation.register_action("my_component.do_something", MyAction, schema, synchronous=True)`. Use `synchronous=True` for actions that run to completion inside `play()` without deferring. Use `synchronous=False` if the action may suspend/defer execution (e.g. `delay`, `wait_until`, `script.wait`) or store trigger arguments for later use.
+        Register it without writing a builder:
+        ```python
+        automation.register_simple_action(
+            "my_component.do_something", MyAction, schema, synchronous=True
+        )
+        ```
+        The constructor receives the object named by `config[CONF_ID]`. Use `register_bare_action` for a
+        no-argument constructor, `register_parented_action` for a class deriving from `Parented<T>`, and
+        the `@automation.register_action(...)` decorator only when the builder must also set fields.
+
+        Use `synchronous=True` for actions that run to completion inside `play()` without deferring. Use `synchronous=False` if the action may suspend/defer execution (e.g. `delay`, `wait_until`, `script.wait`) or store trigger arguments for later use.
 
     *   **Conditions:**
         ```cpp
@@ -443,7 +453,8 @@ file does, and it is the authority when they disagree. The most useful starting
           MyComponent *parent_;
         };
         ```
-        Register with `@automation.register_condition("my_component.is_active", MyCondition, schema)`.
+        Register with `automation.register_simple_condition("my_component.is_active", MyCondition, schema)`;
+        `register_bare_condition`, `register_parented_condition` and the decorator follow the action rules.
 
 *   **Type Hints:** Type-hint all function signatures, including test functions and config validators (e.g. `def validate_x(config: ConfigType) -> ConfigType:`, `def test_x() -> None:`). Import `ConfigType` from `esphome.types`.
 
@@ -553,6 +564,7 @@ file does, and it is the authority when they disagree. The most useful starting
     4.  **Lint:** Run `prek` to ensure code is compliant.
     5.  **Commit:** Commit your changes. There is no strict format for commit messages.
     6.  **Pull Request:** Submit a PR against the `dev` branch. The Pull Request title must start with a `[tag]` prefix. For component work, use the component name (e.g., `[display] Fix bug`, `[abc123] Add new component`); for changes to shared/core code that isn't tied to a single component, use `[core]` (e.g., `[core] Add validator`). Update documentation, examples, and add `CODEOWNERS` entries as needed. Pull requests should always be made using the `.github/PULL_REQUEST_TEMPLATE.md` template - fill out all sections completely without removing any parts of the template.
+    7.  **Comments:** When commenting on GitHub PRs or issues, don't tag contributors, especially bots. Avoid referring to list items (e.g. from reviews) with the form #nn - this will be interpreted by GitHub as a reference to issue or PR nn. Keep comments short and exclude irrelevant details, backstories, restatement of previous comments and anything that is already obvious to the reader.
 
 *   **Documentation Contributions:**
     *   Documentation is hosted in the separate `esphome/esphome.io` repository.
@@ -628,6 +640,9 @@ file does, and it is the authority when they disagree. The most useful starting
                _request_listener_slot()
                cg.add(hub.register_listener(var))
            ```
+           When several instances each own a list declared at the same size (one per hub of a
+           `MULTI_CONF` component), pass the owning object as the key, `_request_listener_slot(str(hub))`;
+           the define is then the largest count any one key requested instead of the total.
            ```cpp
            #ifdef MY_COMPONENT_LISTENER_COUNT
              void register_listener(MyComponentListener *listener);
@@ -839,7 +854,7 @@ file does, and it is the authority when they disagree. The most useful starting
         cv.rename_key(
             CONF_OLD_KEY, CONF_NEW_KEY, removed_in="2026.6.0", component="my_component"
         ),
-        cv.Schema({ ... }),
+        cv.Schema({...}),
     )
     ```
     For other deprecations, warn manually during validation:

CODEOWNERS

@@ -100,6 +100,7 @@ esphome/components/bmp581_i2c/* @danielkent-net @kahrendt
 esphome/components/bmp581_spi/* @danielkent-net @kahrendt
 esphome/components/bp1658cj/* @Cossid
 esphome/components/bp5758d/* @Cossid
+esphome/components/bridge/* @kbx81
 esphome/components/bthome_mithermometer/* @nagyrobi
 esphome/components/button/* @esphome/core
 esphome/components/bytebuffer/* @clydebarrow
@@ -111,6 +112,8 @@ esphome/components/captive_portal/* @esphome/core
 esphome/components/cc1101/* @gabest11 @lygris
 esphome/components/ccs811/* @habbie
 esphome/components/cd74hc4067/* @asoehlke
+esphome/components/cdc_acm_uart/* @kbx81
+esphome/components/cdc_acm_uart/bridge/* @kbx81
 esphome/components/ch422g/* @clydebarrow @jesterret
 esphome/components/ch423/* @dwmw2
 esphome/components/chsc6x/* @kkosik20
@@ -179,7 +182,6 @@ esphome/components/esp32_camera_web_server/* @ayufan
 esphome/components/esp32_can/* @Sympatron
 esphome/components/esp32_hosted/* @swoboda1337
 esphome/components/esp32_hosted/update/* @swoboda1337
-esphome/components/esp32_improv/* @jesserockz
 esphome/components/esp32_rmt/* @jesserockz
 esphome/components/esp32_rmt_led_strip/* @jesserockz
 esphome/components/esp8266/* @esphome/core
@@ -263,8 +265,10 @@ esphome/components/i2s_audio/* @jesserockz
 esphome/components/i2s_audio/microphone/* @jesserockz
 esphome/components/i2s_audio/speaker/* @jesserockz @kahrendt
 esphome/components/iaqcore/* @yozik04
+esphome/components/icnt86/* @danepowell
 esphome/components/ili9xxx/* @clydebarrow @nielsnl68
 esphome/components/improv_base/* @esphome/core
+esphome/components/improv_ble/* @jesserockz
 esphome/components/improv_serial/* @esphome/core
 esphome/components/ina226/* @latonita @Sergio303
 esphome/components/ina260/* @mreditor97
@@ -474,6 +478,7 @@ esphome/components/sendspin/image/* @kahrendt
 esphome/components/sendspin/media_player/* @kahrendt
 esphome/components/sendspin/media_source/* @kahrendt
 esphome/components/sendspin/sensor/* @kahrendt
+esphome/components/sendspin/switch/* @kahrendt
 esphome/components/sendspin/text_sensor/* @kahrendt
 esphome/components/sensirion_common/* @martgras
 esphome/components/sensor/* @esphome/core
@@ -586,6 +591,7 @@ esphome/components/uart/* @esphome/core
 esphome/components/uart/button/* @ssieb
 esphome/components/uart/event/* @eoasmxd
 esphome/components/uart/packet_transport/* @clydebarrow
+esphome/components/uart_mux/* @kbx81
 esphome/components/udp/* @clydebarrow
 esphome/components/ufire_ec/* @pvizeli
 esphome/components/ufire_ise/* @pvizeli

Doxyfile

@@ -48,7 +48,7 @@ PROJECT_NAME           = ESPHome
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 2026.9.1
+PROJECT_NUMBER         = 2026.10.0-dev
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a

esphome/api_client.py

@@ -23,9 +23,7 @@ from esphome.util import safe_print
 if TYPE_CHECKING:
     from collections.abc import Callable
 
-    from aioesphomeapi.api_pb2 import (
-        SubscribeLogsResponse,  # pylint: disable=no-name-in-module
-    )
+    from aioesphomeapi.api_pb2 import SubscribeLogsResponse  # pylint: disable=no-name-in-module
 
 
 _LOGGER = logging.getLogger(__name__)

esphome/automation.py

@@ -102,6 +102,101 @@ def register_condition(name: str, condition_type: MockObjClass, schema: cv.Schem
     return CONDITION_REGISTRY.register(name, condition_type, schema)
 
 
+async def _build_with_parent(
+    config: ConfigType,
+    automation_id: ID,
+    template_arg: cg.TemplateArguments,
+    args: TemplateArgsType,
+) -> MockObj:
+    parent = await cg.get_variable(config[CONF_ID])
+    return cg.new_Pvariable(automation_id, template_arg, parent)
+
+
+async def _build_without_parent(
+    config: ConfigType,
+    automation_id: ID,
+    template_arg: cg.TemplateArguments,
+    args: TemplateArgsType,
+) -> MockObj:
+    return cg.new_Pvariable(automation_id, template_arg)
+
+
+async def _build_parented(
+    config: ConfigType,
+    automation_id: ID,
+    template_arg: cg.TemplateArguments,
+    args: TemplateArgsType,
+) -> MockObj:
+    var = cg.new_Pvariable(automation_id, template_arg)
+    await cg.register_parented(var, config[CONF_ID])
+    return var
+
+
+def register_simple_action(
+    name: str,
+    action_type: MockObjClass,
+    schema: cv.Schema,
+    *,
+    synchronous: bool,
+) -> None:
+    """Register an action whose constructor takes the object named by ``config[CONF_ID]``.
+
+    Use the ``register_action`` decorator instead when the builder must also set fields.
+    """
+    register_action(name, action_type, schema, synchronous=synchronous)(
+        _build_with_parent
+    )
+
+
+def register_simple_condition(
+    name: str, condition_type: MockObjClass, schema: cv.Schema
+) -> None:
+    """Condition counterpart of ``register_simple_action``."""
+    register_condition(name, condition_type, schema)(_build_with_parent)
+
+
+def register_bare_action(
+    name: str,
+    action_type: MockObjClass,
+    schema: cv.Schema,
+    *,
+    synchronous: bool,
+) -> None:
+    """Register an action whose constructor takes no arguments."""
+    register_action(name, action_type, schema, synchronous=synchronous)(
+        _build_without_parent
+    )
+
+
+def register_bare_condition(
+    name: str, condition_type: MockObjClass, schema: cv.Schema
+) -> None:
+    """Condition counterpart of ``register_bare_action``."""
+    register_condition(name, condition_type, schema)(_build_without_parent)
+
+
+def register_parented_action(
+    name: str,
+    action_type: MockObjClass,
+    schema: cv.Schema,
+    *,
+    synchronous: bool,
+) -> None:
+    """Register an action deriving from ``Parented<T>``.
+
+    The object is constructed without arguments and ``set_parent()`` receives the object
+    named by ``config[CONF_ID]``.
+    """
+    register_action(name, action_type, schema, synchronous=synchronous)(_build_parented)
+
+
+def register_parented_condition(
+    name: str, condition_type: MockObjClass, schema: cv.Schema
+) -> None:
+    """Condition counterpart of ``register_parented_action``."""
+    register_condition(name, condition_type, schema)(_build_parented)
+
+
 Action = cg.esphome_ns.class_("Action")
 Trigger = cg.esphome_ns.class_("Trigger")
 ACTION_REGISTRY = Registry()
@@ -534,44 +629,20 @@ async def lambda_action_to_code(
     return new_lambda_pvariable(action_id, lambda_, StatelessLambdaAction, template_arg)
 
 
-@register_action(
+register_simple_action(
     "component.update",
     UpdateComponentAction,
-    maybe_simple_id(
-        {
-            cv.Required(CONF_ID): cv.use_id(cg.PollingComponent),
-        }
-    ),
+    maybe_simple_id({cv.Required(CONF_ID): cv.use_id(cg.PollingComponent)}),
     synchronous=True,
 )
-async def component_update_action_to_code(
-    config: ConfigType,
-    action_id: ID,
-    template_arg: cg.TemplateArguments,
-    args: TemplateArgsType,
-) -> MockObj:
-    comp = await cg.get_variable(config[CONF_ID])
-    return cg.new_Pvariable(action_id, template_arg, comp)
 
 
-@register_action(
+register_simple_action(
     "component.suspend",
     SuspendComponentAction,
-    maybe_simple_id(
-        {
-            cv.Required(CONF_ID): cv.use_id(cg.PollingComponent),
-        }
-    ),
+    maybe_simple_id({cv.Required(CONF_ID): cv.use_id(cg.PollingComponent)}),
     synchronous=True,
 )
-async def component_suspend_action_to_code(
-    config: ConfigType,
-    action_id: ID,
-    template_arg: cg.TemplateArguments,
-    args: TemplateArgsType,
-) -> MockObj:
-    comp = await cg.get_variable(config[CONF_ID])
-    return cg.new_Pvariable(action_id, template_arg, comp)
 
 
 @register_action(

esphome/build_gen/espidf.py

@@ -90,9 +90,10 @@ def get_project_cmakelists(
     """
     idf_target = variant_to_idf_target(get_esp32_variant())
 
-    # esp_idf_size 2.x (bundled with IDF >=6.0) made NG the default and
-    # removed the --ng flag; on 1.x (IDF 5.5) --ng is required to get
-    # --format=raw because the legacy mode doesn't support it.
+    # esp_idf_size 2.x (IDF >=6.0) made NG the default and removed --ng;
+    # 1.x (IDF 5.5) needs --ng for --format=json2. 1.x json2 also lacks
+    # total_size, hence the ELF fallback in espidf/size_summary.py; both
+    # go away together when 1.x support is dropped.
     size_ng_flag = "--ng" if idf_version() < cv.Version(6, 0, 0) else ""
 
     # Project-wide compile options: -D defines and -W warning flags (skip
@@ -211,10 +212,12 @@ include($ENV{{IDF_PATH}}/tools/cmake/project.cmake)
 
 project({CORE.name})
 
-# Emit raw JSON size data for ESPHome to read post-build.
+# Emit per-memory-type JSON size data for ESPHome to read post-build.
+# json2 stays small; raw dumps every symbol (~2s on a large map) and
+# this command runs inside the link edge, blocking everything downstream.
 add_custom_command(
     TARGET ${{CMAKE_PROJECT_NAME}}.elf POST_BUILD
-    COMMAND ${{PYTHON}} -m esp_idf_size {size_ng_flag} --format=raw
+    COMMAND ${{PYTHON}} -m esp_idf_size {size_ng_flag} --format=json2
             -o ${{CMAKE_BINARY_DIR}}/esp_idf_size.json
             ${{CMAKE_PROJECT_NAME}}.map
     WORKING_DIRECTORY ${{CMAKE_BINARY_DIR}}

esphome/component_aliases.py

@@ -6,5 +6,6 @@ See the component-alias section of esphome/loader.py.
 
 # alias -> (canonical component, removal version or None)
 COMPONENT_ALIASES: dict[str, tuple[str, str | None]] = {
+    "esp32_improv": ("improv_ble", "2027.4.0"),
     "rp2040": ("rp2", "2027.7.0"),
 }

esphome/components/adc/adc_sensor.h

@@ -94,7 +94,7 @@ class ADCSensor final : public sensor::Sensor, public PollingComponent, public v
   ///   - SamplingMode::MIN: Use the lowest sample value
   ///   - SamplingMode::MAX: Use the highest sample value
   /// @param sampling_mode The desired sampling mode to use for aggregating ADC samples.
-  void set_sampling_mode(SamplingMode sampling_mode);
+  void set_sampling_mode(SamplingMode sampling_mode) { this->sampling_mode_ = sampling_mode; }
 
   /// Perform a single ADC sampling operation and return the measured value.
   /// This function handles raw readings, calibration, and averaging as needed.

esphome/components/adc/adc_sensor_common.cpp

@@ -76,6 +76,4 @@ void ADCSensor::set_sample_count(uint8_t sample_count) {
   }
 }
 
-void ADCSensor::set_sampling_mode(SamplingMode sampling_mode) { this->sampling_mode_ = sampling_mode; }
-
 }  // namespace esphome::adc

esphome/components/alarm_control_panel/alarm_control_panel.h

@@ -138,11 +138,11 @@ class AlarmControlPanel : public EntityBase {
   // in order to store last panel state in flash
   ESPPreferenceObject pref_;
   // current state
-  AlarmControlPanelState current_state_;
+  AlarmControlPanelState current_state_{ACP_STATE_DISARMED};
   // the desired (or previous) state
-  AlarmControlPanelState desired_state_;
+  AlarmControlPanelState desired_state_{ACP_STATE_DISARMED};
   // last time the state was updated
-  uint32_t last_update_;
+  uint32_t last_update_{0};
   // the call control function
   virtual void control(const AlarmControlPanelCall &call) = 0;
   // state callback - passes the new state to listeners

esphome/components/api/__init__.py

@@ -136,6 +136,12 @@ CONF_LISTEN_BACKLOG = "listen_backlog"
 CONF_MAX_SEND_QUEUE = "max_send_queue"
 CONF_STATE_SUBSCRIPTION_ONLY = "state_subscription_only"
 
+# Schema defaults that also match the C++ initializers in api_server.h; codegen
+# skips the setter when the config equals them.
+DEFAULT_PORT = 6053
+DEFAULT_REBOOT_TIMEOUT = "15min"
+DEFAULT_BATCH_DELAY = "100ms"
+
 
 def _register_provisioning_source(config: ConfigType) -> ConfigType:
     """Register the API as a provisioning source when encryption is enabled.
@@ -292,7 +298,7 @@ CONFIG_SCHEMA = cv.All(
     cv.Schema(
         {
             cv.GenerateID(): cv.declare_id(APIServer),
-            cv.Optional(CONF_PORT, default=6053): cv.port,
+            cv.Optional(CONF_PORT, default=DEFAULT_PORT): cv.port,
             # Removed in 2026.1.0 - kept to provide helpful error message
             cv.Optional(CONF_PASSWORD): cv.invalid(
                 "The 'password' option has been removed in ESPHome 2026.1.0.\n"
@@ -305,14 +311,14 @@ CONFIG_SCHEMA = cv.All(
                 "Or visit https://esphome.io/components/api/#configuration-variables"
             ),
             cv.Optional(
-                CONF_REBOOT_TIMEOUT, default="15min"
+                CONF_REBOOT_TIMEOUT, default=DEFAULT_REBOOT_TIMEOUT
             ): cv.positive_time_period_milliseconds,
             cv.Exclusive(
                 CONF_SERVICES, group_of_exclusion=CONF_ACTIONS
             ): ACTIONS_SCHEMA,
             cv.Exclusive(CONF_ACTIONS, group_of_exclusion=CONF_ACTIONS): ACTIONS_SCHEMA,
             cv.Optional(CONF_ENCRYPTION): encryption_schema,
-            cv.Optional(CONF_BATCH_DELAY, default="100ms"): cv.All(
+            cv.Optional(CONF_BATCH_DELAY, default=DEFAULT_BATCH_DELAY): cv.All(
                 cv.positive_time_period_milliseconds,
                 cv.Range(max=cv.TimePeriod(milliseconds=65535)),
             ),
@@ -462,9 +468,15 @@ async def to_code(config: ConfigType) -> None:
     # Request a log listener slot for API log streaming
     request_log_listener()
 
-    cg.add(var.set_port(config[CONF_PORT]))
-    cg.add(var.set_reboot_timeout(config[CONF_REBOOT_TIMEOUT]))
-    cg.add(var.set_batch_delay(config[CONF_BATCH_DELAY]))
+    # Skip the setters when the config matches the C++ initializers (DEFAULT_*).
+    if (port := config[CONF_PORT]) != DEFAULT_PORT:
+        cg.add(var.set_port(port))
+    if (reboot_timeout := config[CONF_REBOOT_TIMEOUT]) != cv.time_period(
+        DEFAULT_REBOOT_TIMEOUT
+    ):
+        cg.add(var.set_reboot_timeout(reboot_timeout))
+    if (batch_delay := config[CONF_BATCH_DELAY]) != cv.time_period(DEFAULT_BATCH_DELAY):
+        cg.add(var.set_batch_delay(batch_delay))
     if CONF_LISTEN_BACKLOG in config:
         cg.add(var.set_listen_backlog(config[CONF_LISTEN_BACKLOG]))
     cg.add_define("MAX_API_CONNECTIONS", config[CONF_MAX_CONNECTIONS])

esphome/components/api/api.proto

@@ -77,6 +77,7 @@ service APIConnection {
   rpc serial_proxy_set_modem_pins(SerialProxySetModemPinsRequest) returns (void) {}
   rpc serial_proxy_get_modem_pins(SerialProxyGetModemPinsRequest) returns (void) {}
   rpc serial_proxy_request(SerialProxyRequest) returns (void) {}
+  rpc serial_proxy_set_mode(SerialProxySetModeRequest) returns (void) {}
 }
 
 
@@ -2726,7 +2727,8 @@ enum SerialProxyParity {
   SERIAL_PROXY_PARITY_ODD = 2;
 }
 
-// Configure UART parameters for a serial proxy instance
+// Configure UART parameters for a serial proxy instance. Only the subscribed client may
+// configure the port; others are refused with PORT_IN_USE (since API 1.17).
 message SerialProxyConfigureRequest {
   option (id) = 138;
   option (source) = SOURCE_CLIENT;
@@ -2752,7 +2754,8 @@ message SerialProxyDataReceived {
   bytes data = 2;               // Raw data received from the serial device
 }
 
-// Write data to a serial device
+// Write data to a serial device. Only the subscribed client may write; writes from
+// others are ignored (since API 1.17).
 message SerialProxyWriteRequest {
   option (id) = 140;
   option (source) = SOURCE_CLIENT;
@@ -2763,7 +2766,8 @@ message SerialProxyWriteRequest {
   bytes data = 2;               // Raw data to write to the serial device
 }
 
-// Set modem control pin states (RTS and DTR)
+// Set modem control pin states (RTS and DTR). Only the subscribed client may set them;
+// others are refused with PORT_IN_USE (since API 1.17).
 message SerialProxySetModemPinsRequest {
   option (id) = 141;
   option (source) = SOURCE_CLIENT;
@@ -2802,6 +2806,7 @@ enum SerialProxyRequestType {
   // error the device answers with INVALID_ARGUMENT.
   SERIAL_PROXY_REQUEST_TYPE_CONFIGURE = 3;      // Acknowledges a SerialProxyConfigureRequest
   SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS = 4; // Acknowledges a SerialProxySetModemPinsRequest
+  SERIAL_PROXY_REQUEST_TYPE_SET_MODE = 5;       // Acknowledges a SerialProxySetModeRequest (since API 1.17)
 }
 
 enum SerialProxyStatus {
@@ -2814,7 +2819,8 @@ enum SerialProxyStatus {
   SERIAL_PROXY_STATUS_INVALID_ARGUMENT = 6; // Invalid instance index or parameter value
 }
 
-// Generic request message for simple serial proxy operations
+// Generic request message for simple serial proxy operations. FLUSH requires an active
+// subscription; it is refused with PORT_IN_USE otherwise (since API 1.17).
 message SerialProxyRequest {
   option (id) = 144;
   option (source) = SOURCE_CLIENT;
@@ -2838,6 +2844,29 @@ message SerialProxyRequestResponse {
   string error_message = 4;            // Additional detail on failure (optional)
 }
 
+// How a port treats the bytes passing through it. RAW is a plain byte pipe; PROTOCOL
+// activates the port's protocol-aware tap (if one is configured), letting it observe
+// traffic and inject protocol bytes such as acknowledgements. Which protocol the tap
+// speaks is a property of the device configuration, discoverable from the tap
+// component's own API surface. A client that is about to flash firmware selects RAW
+// first, which definitively disables that injection.
+enum SerialProxyMode {
+  SERIAL_PROXY_MODE_RAW = 0;
+  SERIAL_PROXY_MODE_PROTOCOL = 1;
+}
+
+// Only the subscribed client may change the mode; any other caller -- including one that
+// never subscribed -- is refused with PORT_IN_USE. PROTOCOL is refused with NOT_SUPPORTED
+// when the port has no protocol-aware tap configured.
+message SerialProxySetModeRequest {
+  option (id) = 152;
+  option (source) = SOURCE_CLIENT;
+  option (ifdef) = "USE_SERIAL_PROXY";
+
+  uint32 instance = 1;
+  SerialProxyMode mode = 2;
+}
+
 // ==================== BLUETOOTH CONNECTION PARAMS ====================
 message BluetoothSetConnectionParamsRequest {
   option (id) = 145;

esphome/components/api/api_connection.cpp

@@ -720,12 +720,7 @@ uint16_t APIConnection::try_send_switch_info(EntityBase *entity, APIConnection *
 }
 void APIConnection::on_switch_command_request(const SwitchCommandRequest &msg) {
   ENTITY_COMMAND_GET(switch_::Switch, a_switch, switch)
-
-  if (msg.state) {
-    a_switch->turn_on();
-  } else {
-    a_switch->turn_off();
-  }
+  a_switch->control(msg.state);
 }
 #endif
 
@@ -1664,6 +1659,7 @@ void APIConnection::on_serial_proxy_request(const SerialProxyRequest &msg) {
       break;
     case enums::SERIAL_PROXY_REQUEST_TYPE_CONFIGURE:
     case enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS:
+    case enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODE:
       // Response-only discriminators; never valid in a request
       ESP_LOGW(TAG, "Response-only serial proxy request type: %" PRIu32, static_cast<uint32_t>(msg.type));
       status = enums::SERIAL_PROXY_STATUS_INVALID_ARGUMENT;
@@ -1676,6 +1672,19 @@ void APIConnection::on_serial_proxy_request(const SerialProxyRequest &msg) {
   send_serial_proxy_ack(this, msg.instance, msg.type, status);
 }
 
+void APIConnection::on_serial_proxy_set_mode_request(const SerialProxySetModeRequest &msg) {
+  auto &proxies = App.get_serial_proxies();
+  if (msg.instance >= proxies.size()) {
+    ESP_LOGW(TAG, "Serial proxy instance %" PRIu32 " out of range", msg.instance);
+    send_serial_proxy_ack(this, msg.instance, enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODE,
+                          enums::SERIAL_PROXY_STATUS_INVALID_ARGUMENT);
+    return;
+  }
+  serial_proxy::SerialProxyResult result = proxies[msg.instance]->set_mode_from_client(this, msg.mode);
+  send_serial_proxy_ack(this, msg.instance, enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODE,
+                        serial_proxy_result_to_status(result));
+}
+
 void APIConnection::send_serial_proxy_data(const SerialProxyDataReceived &msg) {
   if (!this->send_message(msg)) {
     ESP_LOGV(TAG, "Serial proxy data dropped, TCP buffer full");
@@ -1802,7 +1811,7 @@ bool APIConnection::send_hello_response_(const HelloRequest &msg) {
 
   HelloResponse resp;
   resp.api_version_major = 1;
-  resp.api_version_minor = 16;
+  resp.api_version_minor = 17;
   // Send only the version string - the client only logs this for debugging and doesn't use it otherwise
   resp.server_info = ESPHOME_VERSION_REF;
   resp.name = StringRef(App.get_name());

esphome/components/api/api_connection.h

@@ -244,6 +244,7 @@ class APIConnection final : public APIServerConnectionBase {
   void on_serial_proxy_set_modem_pins_request(const SerialProxySetModemPinsRequest &msg);
   void on_serial_proxy_get_modem_pins_request(const SerialProxyGetModemPinsRequest &msg);
   void on_serial_proxy_request(const SerialProxyRequest &msg);
+  void on_serial_proxy_set_mode_request(const SerialProxySetModeRequest &msg);
   void send_serial_proxy_data(const SerialProxyDataReceived &msg);
 #endif
 

esphome/components/api/api_pb2.cpp

@@ -4253,6 +4253,19 @@ uint32_t SerialProxyRequestResponse::calculate_size() const {
   size += ProtoSize::calc_length(1, this->error_message.size());
   return size;
 }
+bool SerialProxySetModeRequest::decode_varint(uint32_t field_id, proto_varint_value_t value) {
+  switch (field_id) {
+    case 1:
+      this->instance = value;
+      break;
+    case 2:
+      this->mode = static_cast<enums::SerialProxyMode>(value);
+      break;
+    default:
+      return false;
+  }
+  return true;
+}
 #endif
 #ifdef USE_BLUETOOTH_PROXY_CONNECTIONS
 bool BluetoothSetConnectionParamsRequest::decode_varint(uint32_t field_id, proto_varint_value_t value) {

esphome/components/api/api_pb2.h

@@ -356,6 +356,7 @@ enum SerialProxyRequestType : uint32_t {
   SERIAL_PROXY_REQUEST_TYPE_FLUSH = 2,
   SERIAL_PROXY_REQUEST_TYPE_CONFIGURE = 3,
   SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS = 4,
+  SERIAL_PROXY_REQUEST_TYPE_SET_MODE = 5,
 };
 enum SerialProxyStatus : uint32_t {
   SERIAL_PROXY_STATUS_OK = 0,
@@ -366,6 +367,10 @@ enum SerialProxyStatus : uint32_t {
   SERIAL_PROXY_STATUS_PORT_IN_USE = 5,
   SERIAL_PROXY_STATUS_INVALID_ARGUMENT = 6,
 };
+enum SerialProxyMode : uint32_t {
+  SERIAL_PROXY_MODE_RAW = 0,
+  SERIAL_PROXY_MODE_PROTOCOL = 1,
+};
 #endif
 
 }  // namespace enums
@@ -3403,6 +3408,22 @@ class SerialProxyRequestResponse final : public ProtoMessage {
 
  protected:
 };
+class SerialProxySetModeRequest final : public ProtoDecodableMessage {
+ public:
+  static constexpr uint16_t MESSAGE_TYPE = 152;
+  static constexpr uint8_t ESTIMATED_SIZE = 6;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  const LogString *message_name() const override { return LOG_STR("serial_proxy_set_mode_request"); }
+#endif
+  uint32_t instance{0};
+  enums::SerialProxyMode mode{};
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  const char *dump_to(DumpBuffer &out) const override;
+#endif
+
+ protected:
+  bool decode_varint(uint32_t field_id, proto_varint_value_t value) override;
+};
 #endif
 #ifdef USE_BLUETOOTH_PROXY_CONNECTIONS
 class BluetoothSetConnectionParamsRequest final : public ProtoDecodableMessage {

esphome/components/api/api_pb2_dump.cpp

@@ -854,6 +854,8 @@ template<> const char *proto_enum_to_string<enums::SerialProxyRequestType>(enums
       return ESPHOME_PSTR("SERIAL_PROXY_REQUEST_TYPE_CONFIGURE");
     case enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS:
       return ESPHOME_PSTR("SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS");
+    case enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODE:
+      return ESPHOME_PSTR("SERIAL_PROXY_REQUEST_TYPE_SET_MODE");
     default:
       return ESPHOME_PSTR("UNKNOWN");
   }
@@ -878,6 +880,16 @@ template<> const char *proto_enum_to_string<enums::SerialProxyStatus>(enums::Ser
       return ESPHOME_PSTR("UNKNOWN");
   }
 }
+template<> const char *proto_enum_to_string<enums::SerialProxyMode>(enums::SerialProxyMode value) {
+  switch (value) {
+    case enums::SERIAL_PROXY_MODE_RAW:
+      return ESPHOME_PSTR("SERIAL_PROXY_MODE_RAW");
+    case enums::SERIAL_PROXY_MODE_PROTOCOL:
+      return ESPHOME_PSTR("SERIAL_PROXY_MODE_PROTOCOL");
+    default:
+      return ESPHOME_PSTR("UNKNOWN");
+  }
+}
 #endif
 
 const char *HelloRequest::dump_to(DumpBuffer &out) const {
@@ -2805,6 +2817,12 @@ const char *SerialProxyRequestResponse::dump_to(DumpBuffer &out) const {
   dump_field(out, ESPHOME_PSTR("error_message"), this->error_message);
   return out.c_str();
 }
+const char *SerialProxySetModeRequest::dump_to(DumpBuffer &out) const {
+  MessageDumpHelper helper(out, ESPHOME_PSTR("SerialProxySetModeRequest"));
+  dump_field(out, ESPHOME_PSTR("instance"), this->instance);
+  dump_field(out, ESPHOME_PSTR("mode"), static_cast<enums::SerialProxyMode>(this->mode));
+  return out.c_str();
+}
 #endif
 #ifdef USE_BLUETOOTH_PROXY_CONNECTIONS
 const char *BluetoothSetConnectionParamsRequest::dump_to(DumpBuffer &out) const {

esphome/components/api/api_pb2_service.cpp

@@ -712,6 +712,17 @@ void APIConnection::read_message_(uint32_t msg_size, uint32_t msg_type, const ui
       this->on_device_capabilities_request();
       break;
     }
+#ifdef USE_SERIAL_PROXY
+    case SerialProxySetModeRequest::MESSAGE_TYPE: {
+      SerialProxySetModeRequest msg;
+      msg.decode(msg_data, msg_size);
+#ifdef HAS_PROTO_MESSAGE_DUMP
+      this->log_receive_message_(LOG_STR("on_serial_proxy_set_mode_request"), msg);
+#endif
+      this->on_serial_proxy_set_mode_request(msg);
+      break;
+    }
+#endif
     default:
       break;
   }

esphome/components/api/api_pb2_service.h

@@ -235,6 +235,9 @@ class APIServerConnectionBase {
   void on_serial_proxy_request(const SerialProxyRequest &value){};
 #endif
 
+#ifdef USE_SERIAL_PROXY
+  void on_serial_proxy_set_mode_request(const SerialProxySetModeRequest &value){};
+#endif
 #ifdef USE_BLUETOOTH_PROXY_CONNECTIONS
   void on_bluetooth_set_connection_params_request(const BluetoothSetConnectionParamsRequest &value){};
 #endif

esphome/components/api/api_server.h

@@ -319,7 +319,7 @@ class APIServer final : public Component,
 #endif
 
   // 4-byte aligned types
-  uint32_t reboot_timeout_{300000};
+  uint32_t reboot_timeout_{900000};  // Keep in sync with DEFAULT_REBOOT_TIMEOUT in __init__.py
   uint32_t last_connected_{0};
 
   // Slots [0, api_connection_count_) are populated; trailing slots are always nullptr.
@@ -356,8 +356,8 @@ class APIServer final : public Component,
 #endif
 
   // Group smaller types together
-  uint16_t port_{6053};
-  uint16_t batch_delay_{100};
+  uint16_t port_{6053};        // Keep in sync with DEFAULT_PORT in __init__.py
+  uint16_t batch_delay_{100};  // Keep in sync with DEFAULT_BATCH_DELAY in __init__.py
   // Connection limits - these defaults will be overridden by config values
   // from cv.SplitDefault in __init__.py which sets platform-specific defaults.
   uint8_t listen_backlog_{4};

esphome/components/at581x/__init__.py

@@ -181,11 +181,11 @@ async def at581x_settings_to_code(
     await cg.register_parented(var, config[CONF_ID])
 
     # Radar configuration
-    if frontend_reset := config.get(CONF_HW_FRONTEND_RESET):
+    if (frontend_reset := config.get(CONF_HW_FRONTEND_RESET)) is not None:
         template_ = await cg.templatable(frontend_reset, args, cg.int8)
         cg.add(var.set_hw_frontend_reset(template_))
 
-    if freq := config.get(CONF_FREQUENCY):
+    if (freq := config.get(CONF_FREQUENCY)) is not None:
         if not cg.is_template(freq):
             freq = int(freq / 1000000)
         template_ = await cg.templatable(freq, args, cg.int_)
@@ -195,19 +195,19 @@ async def at581x_settings_to_code(
         template_ = await cg.templatable(sens_dist, args, cg.int_)
         cg.add(var.set_sensing_distance(template_))
 
-    if selfcheck := config.get(CONF_POWERON_SELFCHECK_TIME):
+    if (selfcheck := config.get(CONF_POWERON_SELFCHECK_TIME)) is not None:
         template_ = await cg.templatable(selfcheck, args, cg.int_)
         cg.add(var.set_poweron_selfcheck_time(template_))
 
-    if protect := config.get(CONF_PROTECT_TIME):
+    if (protect := config.get(CONF_PROTECT_TIME)) is not None:
         template_ = await cg.templatable(protect, args, cg.int_)
         cg.add(var.set_protect_time(template_))
 
-    if trig_base := config.get(CONF_TRIGGER_BASE):
+    if (trig_base := config.get(CONF_TRIGGER_BASE)) is not None:
         template_ = await cg.templatable(trig_base, args, cg.int_)
         cg.add(var.set_trigger_base(template_))
 
-    if trig_keep := config.get(CONF_TRIGGER_KEEP):
+    if (trig_keep := config.get(CONF_TRIGGER_KEEP)) is not None:
         template_ = await cg.templatable(trig_keep, args, cg.int_)
         cg.add(var.set_trigger_keep(template_))
 
@@ -215,7 +215,7 @@ async def at581x_settings_to_code(
         template_ = await cg.templatable(stage_gain, args, cg.int_)
         cg.add(var.set_stage_gain(template_))
 
-    if power := config.get(CONF_POWER_CONSUMPTION):
+    if (power := config.get(CONF_POWER_CONSUMPTION)) is not None:
         if not cg.is_template(power):
             power = int(power * 1000000)
         template_ = await cg.templatable(power, args, cg.int_)

esphome/components/audio/__init__.py

@@ -339,10 +339,7 @@ async def to_code(config: ConfigType) -> None:
     # HTTPS streams verify the server against the root certificate bundle
     require_certificate_bundle()
 
-    add_idf_component(
-        name="esphome/esp-audio-libs",
-        ref="3.2.1",
-    )
+    add_idf_component(name="esphome/esp-audio-libs", ref="4.0.1")
 
     data = _get_data()
 

esphome/components/bang_bang/bang_bang_climate.cpp

@@ -203,16 +203,10 @@ void BangBangClimate::set_away_config(const BangBangClimateTargetTempConfig &awa
   this->away_config_ = away_config;
 }
 
-void BangBangClimate::set_sensor(sensor::Sensor *sensor) { this->sensor_ = sensor; }
-void BangBangClimate::set_humidity_sensor(sensor::Sensor *humidity_sensor) { this->humidity_sensor_ = humidity_sensor; }
-
 Trigger<> *BangBangClimate::get_idle_trigger() { return &this->idle_trigger_; }
 Trigger<> *BangBangClimate::get_cool_trigger() { return &this->cool_trigger_; }
 Trigger<> *BangBangClimate::get_heat_trigger() { return &this->heat_trigger_; }
 
-void BangBangClimate::set_supports_cool(bool supports_cool) { this->supports_cool_ = supports_cool; }
-void BangBangClimate::set_supports_heat(bool supports_heat) { this->supports_heat_ = supports_heat; }
-
 void BangBangClimate::dump_config() {
   LOG_CLIMATE("", "Bang Bang Climate", this);
   ESP_LOGCONFIG(TAG,

esphome/components/bang_bang/bang_bang_climate.h

@@ -22,10 +22,10 @@ class BangBangClimate final : public climate::Climate, public Component {
   void setup() override;
   void dump_config() override;
 
-  void set_sensor(sensor::Sensor *sensor);
-  void set_humidity_sensor(sensor::Sensor *humidity_sensor);
-  void set_supports_cool(bool supports_cool);
-  void set_supports_heat(bool supports_heat);
+  void set_sensor(sensor::Sensor *sensor) { this->sensor_ = sensor; }
+  void set_humidity_sensor(sensor::Sensor *humidity_sensor) { this->humidity_sensor_ = humidity_sensor; }
+  void set_supports_cool(bool supports_cool) { this->supports_cool_ = supports_cool; }
+  void set_supports_heat(bool supports_heat) { this->supports_heat_ = supports_heat; }
   void set_normal_config(const BangBangClimateTargetTempConfig &normal_config);
   void set_away_config(const BangBangClimateTargetTempConfig &away_config);
 

esphome/components/binary/light/binary_light_output.h

@@ -17,11 +17,7 @@ class BinaryLightOutput final : public light::LightOutput {
   void write_state(light::LightState *state) override {
     bool binary;
     state->current_values_as_binary(&binary);
-    if (binary) {
-      this->output_->turn_on();
-    } else {
-      this->output_->turn_off();
-    }
+    this->output_->set_state(binary);
   }
 
  protected:

esphome/components/binary_sensor/__init__.py

@@ -39,6 +39,7 @@ from esphome.const import (
     DEVICE_CLASS_EMPTY,
     DEVICE_CLASS_GARAGE_DOOR,
     DEVICE_CLASS_GAS,
+    DEVICE_CLASS_GLASS_BREAK,
     DEVICE_CLASS_HEAT,
     DEVICE_CLASS_LIGHT,
     DEVICE_CLASS_LOCK,
@@ -81,6 +82,7 @@ DEVICE_CLASSES = [
     DEVICE_CLASS_EMPTY,
     DEVICE_CLASS_GARAGE_DOOR,
     DEVICE_CLASS_GAS,
+    DEVICE_CLASS_GLASS_BREAK,
     DEVICE_CLASS_HEAT,
     DEVICE_CLASS_LIGHT,
     DEVICE_CLASS_LOCK,

esphome/components/binary_sensor/binary_sensor.h

@@ -32,7 +32,8 @@ void log_binary_sensor(const char *tag, const char *prefix, const char *type, Bi
  */
 class BinarySensor : public StatefulEntityBase<bool> {
  public:
-  explicit BinarySensor() = default;
+  // User provided, not "= default": `new(p) BinarySensor()` would zero-fill .bss that is already zero.
+  explicit BinarySensor() {}
 
   const bool &get_state() const override { return this->state; }
   void set_trigger_on_initial_state(bool value) { this->trigger_on_initial_state_ = value; }

esphome/components/binary_sensor/filter.h

@@ -53,6 +53,9 @@ class DelayedOnOffFilter final : public Filter {
 
 class DelayedOnFilter : public Filter {
  public:
+  // User provided, not "= default": `new(p) DelayedOnFilter()` would zero-fill .bss that is already zero.
+  DelayedOnFilter() {}
+
   optional<bool> new_value(bool value) override;
 
   template<typename T> void set_delay(T delay) { this->delay_ = delay; }
@@ -63,6 +66,9 @@ class DelayedOnFilter : public Filter {
 
 class DelayedOffFilter : public Filter {
  public:
+  // User provided, not "= default": `new(p) DelayedOffFilter()` would zero-fill .bss that is already zero.
+  DelayedOffFilter() {}
+
   optional<bool> new_value(bool value) override;
 
   template<typename T> void set_delay(T delay) { this->delay_ = delay; }
@@ -143,6 +149,8 @@ class StatelessLambdaFilter : public Filter {
 
 class SettleFilter : public Filter {
  public:
+  // User provided, not "= default": `new(p) SettleFilter()` would zero-fill .bss that is already zero.
+  SettleFilter() {}
   optional<bool> new_value(bool value) override;
 
   template<typename T> void set_delay(T delay) { this->delay_ = delay; }

esphome/components/bluetooth_connection/bluetooth_connection_bluedroid.h

@@ -31,6 +31,9 @@ class BluetoothConnection;
 // void disconnect() cannot overload with an int-returning twin.
 class BluedroidGattClient final : public esp32_ble_tracker::ESPBTClient, public Component {
  public:
+  // User provided, not "= default": `new(p) BluedroidGattClient()` would zero-fill .bss that is already zero.
+  BluedroidGattClient() {}
+
   static constexpr uint16_t UNSET_CONN_ID = 0xFFFF;
 
   // Lifecycle of one connection attempt's service search.

esphome/components/bluetooth_connection/bluetooth_connection_hub.h

@@ -37,6 +37,9 @@ enum class PendingAck : uint8_t {
 
 class BluetoothConnection final : public ble_device_base::GattClientListener {
  public:
+  // User provided, not "= default": `new(p) BluetoothConnection()` would zero-fill .bss that is already zero.
+  BluetoothConnection() {}
+
   /// Wire the platform backend. Called from codegen before setup.
   void set_backend(ble_device_base::BLEGattConnection *backend) {
     this->backend_ = backend;

esphome/components/bluetooth_connection/bluetooth_connection_rp2.cpp

@@ -626,7 +626,7 @@ void RP2GattClient::handle_connected_(uint8_t status, uint16_t con_handle) {
   // explicit kick the MTU would only be exchanged on the first GATT query,
   // which never happens on a V3_WITH_CACHE connection.
   // Both registration calls above return void (BTstack 075a078, arduino-pico
-  // 6.0.0); failures surface as a missing GATT_EVENT_MTU and are reclaimed by
+  // 6.1.0); failures surface as a missing GATT_EVENT_MTU and are reclaimed by
   // the connect timeout in loop().
   gatt_client_send_mtu_negotiation(&RP2GattClient::gatt_packet_handler, this->con_handle_);
 }

esphome/components/bluetooth_proxy/__init__.py

@@ -395,6 +395,17 @@ async def _to_code_ble_hub(config: ConfigType) -> None:
     await _connections_to_code(var, config)
 
 
+def enable_advertisement_filter() -> None:
+    """Compile the advertisement filter hook into bluetooth_proxy.
+
+    Called by external filtering components from to_code(). The define behind
+    this is an implementation detail; do not emit it directly.
+
+    Public API for external components. Do not remove.
+    """
+    cg.add_define("USE_BLUETOOTH_PROXY_ADVERTISEMENT_FILTER")
+
+
 async def to_code(config: ConfigType) -> None:
     if CORE.is_esp32:
         await _to_code_esp32(config)

esphome/components/bluetooth_proxy/bluetooth_proxy.cpp

@@ -94,6 +94,15 @@ void BluetoothProxy::on_raw_advertisement_(const ble_device_base::RawAdvertiseme
   if (!api::global_api_server->is_connected() || this->api_connection_ == nullptr)
     return;
 
+#ifdef USE_BLUETOOTH_PROXY_ADVERTISEMENT_FILTER
+  // Ask the filter before the packet is queued, so a dropped advertisement never
+  // reaches the batch or the network.
+  if (this->advertisement_filter_.is_set() && !this->advertisement_filter_.should_forward(raw)) {
+    ESP_LOGVV(TAG, "Filtered packet from %012" PRIX64, raw.address);
+    return;
+  }
+#endif
+
   auto &adv = this->response_.advertisements[this->response_.advertisements_len];
   adv.address = raw.address;
   adv.rssi = raw.rssi;
@@ -184,6 +193,9 @@ void BluetoothProxy::dump_config() {
                 "  Adapter MAC: %s",
                 scan_mode, mac_out);
 #endif
+#ifdef USE_BLUETOOTH_PROXY_ADVERTISEMENT_FILTER
+  ESP_LOGCONFIG(TAG, "  Advertisement filter: %s", YESNO(this->advertisement_filter_.is_set()));
+#endif
 }
 
 #ifdef USE_BLUETOOTH_PROXY_CONNECTIONS

esphome/components/bluetooth_proxy/bluetooth_proxy.h

@@ -97,6 +97,29 @@ static_assert(pending_reply_round_trips(0xABCD112233445566ULL, 0x000011223344556
 static_assert(PendingReply{}.empty());
 #endif
 
+#ifdef USE_BLUETOOTH_PROXY_ADVERTISEMENT_FILTER
+/// Predicate slot letting an external component drop advertisements before they
+/// are queued for the API. Same shape as
+/// ble_device_base::RawAdvertisementCallback. Runs on the advertisement hot
+/// path, so it must be cheap and must not block.
+///
+/// Usage:
+///   proxy->set_advertisement_filter({this, [](void *self, const ble_device_base::RawAdvertisement &adv) {
+///     return static_cast<MyFilter *>(self)->should_forward(adv);
+///   }});
+///
+/// Returning false drops the advertisement. Not called at all while the API is
+/// disconnected, which matters to a stateful filter. Compiled in only when an
+/// external component calls bluetooth_proxy.enable_advertisement_filter().
+struct AdvertisementFilter {
+  void *instance{nullptr};
+  bool (*fn)(void *instance, const ble_device_base::RawAdvertisement &adv){nullptr};
+  /// A default-constructed slot is "no filter"; the proxy guards on this.
+  bool is_set() const { return this->fn != nullptr; }
+  bool should_forward(const ble_device_base::RawAdvertisement &adv) const { return this->fn(this->instance, adv); }
+};
+#endif  // USE_BLUETOOTH_PROXY_ADVERTISEMENT_FILTER
+
 class BluetoothProxy final : public Component {
 #ifdef USE_BLUETOOTH_PROXY_CONNECTIONS
   // Allow the connection to update connections_free_response_
@@ -162,6 +185,11 @@ class BluetoothProxy final : public Component {
   void set_active(bool active) { this->active_ = active; }
   bool has_active() { return this->active_; }
 
+#ifdef USE_BLUETOOTH_PROXY_ADVERTISEMENT_FILTER
+  /// One subscriber; a later call replaces an earlier one.
+  void set_advertisement_filter(AdvertisementFilter filter) { this->advertisement_filter_ = filter; }
+#endif
+
   uint32_t get_legacy_version() const {
     if (!this->active_) {
       return LEGACY_PASSIVE_ONLY_VERSION;
@@ -330,6 +358,10 @@ class BluetoothProxy final : public Component {
   // start on an even word, closing two alignment holes.
   uint32_t last_advertisement_flush_time_{0};
 
+#ifdef USE_BLUETOOTH_PROXY_ADVERTISEMENT_FILTER
+  AdvertisementFilter advertisement_filter_{};
+#endif
+
   // BLE advertisement batching
   api::BluetoothLERawAdvertisementsResponse response_;
 

esphome/components/bme280_base/bme280_base.cpp

@@ -341,7 +341,6 @@ void BME280Component::set_pressure_oversampling(BME280Oversampling pressure_over
 void BME280Component::set_humidity_oversampling(BME280Oversampling humidity_over_sampling) {
   this->humidity_oversampling_ = humidity_over_sampling;
 }
-void BME280Component::set_iir_filter(BME280IIRFilter iir_filter) { this->iir_filter_ = iir_filter; }
 uint8_t BME280Component::read_u8_(uint8_t a_register) {
   uint8_t data = 0;
   this->read_byte(a_register, &data);

esphome/components/bme280_base/bme280_base.h

@@ -69,7 +69,7 @@ class BME280Component : public PollingComponent {
   /// Set the oversampling value for the humidity sensor. Default is 16x.
   void set_humidity_oversampling(BME280Oversampling humidity_over_sampling);
   /// Set the IIR Filter used to increase accuracy, defaults to no IIR Filter.
-  void set_iir_filter(BME280IIRFilter iir_filter);
+  void set_iir_filter(BME280IIRFilter iir_filter) { this->iir_filter_ = iir_filter; }
 
   // ========== INTERNAL METHODS ==========
   // (In most use cases you won't need these)

esphome/components/bme680/bme680.cpp

@@ -503,7 +503,6 @@ void BME680Component::set_pressure_oversampling(BME680Oversampling pressure_over
 void BME680Component::set_humidity_oversampling(BME680Oversampling humidity_oversampling) {
   this->humidity_oversampling_ = humidity_oversampling;
 }
-void BME680Component::set_iir_filter(BME680IIRFilter iir_filter) { this->iir_filter_ = iir_filter; }
 void BME680Component::set_heater(uint16_t heater_temperature, uint16_t heater_duration) {
   this->heater_temperature_ = heater_temperature;
   this->heater_duration_ = heater_duration;

esphome/components/bme680/bme680.h

@@ -74,7 +74,7 @@ class BME680Component final : public PollingComponent, public i2c::I2CDevice {
   /// Set the humidity oversampling value. Defaults to 16X.
   void set_humidity_oversampling(BME680Oversampling humidity_oversampling);
   /// Set the IIR Filter value. Defaults to no IIR Filter.
-  void set_iir_filter(BME680IIRFilter iir_filter);
+  void set_iir_filter(BME680IIRFilter iir_filter) { this->iir_filter_ = iir_filter; }
 
   void set_temperature_sensor(sensor::Sensor *temperature_sensor) { temperature_sensor_ = temperature_sensor; }
   void set_pressure_sensor(sensor::Sensor *pressure_sensor) { pressure_sensor_ = pressure_sensor; }

esphome/components/bmp280_base/bmp280_base.cpp

@@ -254,7 +254,6 @@ void BMP280Component::set_temperature_oversampling(BMP280Oversampling temperatur
 void BMP280Component::set_pressure_oversampling(BMP280Oversampling pressure_over_sampling) {
   this->pressure_oversampling_ = pressure_over_sampling;
 }
-void BMP280Component::set_iir_filter(BMP280IIRFilter iir_filter) { this->iir_filter_ = iir_filter; }
 uint8_t BMP280Component::read_u8_(uint8_t a_register) {
   uint8_t data = 0;
   this->bmp_read_byte(a_register, &data);

esphome/components/bmp280_base/bmp280_base.h

@@ -59,7 +59,7 @@ class BMP280Component : public PollingComponent {
   /// Set the oversampling value for the pressure sensor. Default is 16x.
   void set_pressure_oversampling(BMP280Oversampling pressure_over_sampling);
   /// Set the IIR Filter used to increase accuracy, defaults to no IIR Filter.
-  void set_iir_filter(BMP280IIRFilter iir_filter);
+  void set_iir_filter(BMP280IIRFilter iir_filter) { this->iir_filter_ = iir_filter; }
 
   void setup() override;
   void dump_config() override;

esphome/components/bridge/__init__.py

@@ -0,0 +1,4 @@
+CODEOWNERS = ["@kbx81"]
+DOMAIN = "bridge"
+
+IS_PLATFORM_COMPONENT = True

esphome/components/cdc_acm_uart/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@kbx81"]

esphome/components/cdc_acm_uart/bridge/__init__.py

@@ -0,0 +1,114 @@
+from esphome import pins
+import esphome.codegen as cg
+from esphome.components import esp32, uart, usb_cdc_acm
+from esphome.components.bridge import DOMAIN as BRIDGE_DOMAIN
+from esphome.components.esp32 import VARIANT_ESP32P4, VARIANT_ESP32S2, VARIANT_ESP32S3
+import esphome.config_validation as cv
+from esphome.const import CONF_DEBUG, CONF_ID, CONF_UART_ID
+import esphome.final_validate as fv
+from esphome.types import ConfigType
+
+CODEOWNERS = ["@kbx81"]
+DEPENDENCIES = ["tinyusb", "uart", "usb_cdc_acm"]
+
+CONF_DTR_PIN = "dtr_pin"
+CONF_RTS_PIN = "rts_pin"
+CONF_USB_CDC_ACM_ID = "usb_cdc_acm_id"
+
+cdc_acm_uart_ns = cg.esphome_ns.namespace("cdc_acm_uart")
+CDCACMUARTBridge = cdc_acm_uart_ns.class_("CDCACMUARTBridge", cg.Component)
+
+CONFIG_SCHEMA = cv.All(
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(CDCACMUARTBridge),
+            cv.Required(CONF_UART_ID): cv.use_id(uart.IDFUARTComponent),
+            cv.Required(CONF_USB_CDC_ACM_ID): cv.use_id(usb_cdc_acm.USBCDCACMInstance),
+            cv.Optional(CONF_DTR_PIN): pins.gpio_output_pin_schema,
+            cv.Optional(CONF_RTS_PIN): pins.gpio_output_pin_schema,
+        }
+    ).extend(cv.COMPONENT_SCHEMA),
+    # Narrower than usb_cdc_acm's variant list on purpose: S31/H4 untested on
+    # hardware; extend once verified.
+    esp32.only_on_variant(
+        supported=[VARIANT_ESP32P4, VARIANT_ESP32S2, VARIANT_ESP32S3],
+    ),
+)
+
+
+def _subtree_references_uart(node: object, uart_id: str) -> bool:
+    """Return True if any dict in the subtree has a uart_id entry naming this bus."""
+    if isinstance(node, dict):
+        return any(
+            (key == CONF_UART_ID and str(value) == uart_id)
+            or _subtree_references_uart(value, uart_id)
+            for key, value in node.items()
+        )
+    if isinstance(node, list):
+        return any(_subtree_references_uart(item, uart_id) for item in node)
+    return False
+
+
+def _reject_debug(uart_conf: ConfigType) -> ConfigType:
+    # The worker tasks use the IDF driver directly, so the uart debugger never sees
+    # bridge traffic and its dummy_receiver would drain RX bytes on the main loop.
+    if CONF_DEBUG in uart_conf:
+        raise cv.Invalid(
+            "A bridged UART cannot use 'debug'; the bridge bypasses the UART "
+            "component's read/write path.",
+            [CONF_DEBUG],
+        )
+    return uart_conf
+
+
+def _final_validate(config: ConfigType) -> ConfigType:
+    full_config = fv.full_config.get()
+    # Bridges of any platform must own their interfaces exclusively; shared ring
+    # buffers and overwritten callbacks would corrupt both streams silently. The
+    # seen-set is keyed on the bridge domain so future platforms share it.
+    # Other components bind either interface through the same uart_id key (the CDC
+    # instance is itself a uart::UARTComponent) and would race the worker tasks.
+    # Bare `id:` references (a uart.write action) cannot be distinguished; not caught.
+    data = full_config.data.setdefault(BRIDGE_DOMAIN, {})
+    for conf_key, label in (
+        (CONF_UART_ID, "UART"),
+        (CONF_USB_CDC_ACM_ID, "USB CDC-ACM interface"),
+    ):
+        owned_id = str(config[conf_key])
+        used = data.setdefault(conf_key, set())
+        if owned_id in used:
+            raise cv.Invalid(
+                f"The {label} '{owned_id}' is already bridged by another 'bridge' "
+                f"instance; each bridge requires its own {label}.",
+                [conf_key],
+            )
+        used.add(owned_id)
+        for domain, domain_conf in full_config.items():
+            if domain == BRIDGE_DOMAIN:
+                continue
+            if _subtree_references_uart(domain_conf, owned_id):
+                raise cv.Invalid(
+                    f"The {label} '{owned_id}' is also used by '{domain}'; a bridge "
+                    f"requires exclusive use of its {label}.",
+                    [conf_key],
+                )
+
+    fv.id_declaration_match_schema(_reject_debug)(config[CONF_UART_ID])
+    return config
+
+
+FINAL_VALIDATE_SCHEMA = _final_validate
+
+
+async def to_code(config: ConfigType) -> None:
+    uart_component = await cg.get_variable(config[CONF_UART_ID])
+    usb_cdc = await cg.get_variable(config[CONF_USB_CDC_ACM_ID])
+    var = cg.new_Pvariable(config[CONF_ID], uart_component, usb_cdc)
+    await cg.register_component(var, config)
+
+    if dtr_pin_config := config.get(CONF_DTR_PIN):
+        dtr_pin = await cg.gpio_pin_expression(dtr_pin_config)
+        cg.add(var.set_dtr_pin(dtr_pin))
+    if rts_pin_config := config.get(CONF_RTS_PIN):
+        rts_pin = await cg.gpio_pin_expression(rts_pin_config)
+        cg.add(var.set_rts_pin(rts_pin))

esphome/components/cdc_acm_uart/bridge/cdc_acm_uart_bridge.cpp

@@ -0,0 +1,468 @@
+#if defined(USE_ESP32_VARIANT_ESP32P4) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
+#include "cdc_acm_uart_bridge.h"
+#include "esphome/core/application.h"
+#include "esphome/core/hal.h"
+#include "esphome/core/log.h"
+
+#include <algorithm>
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "freertos/ringbuf.h"
+#include "driver/uart.h"
+#include "soc/soc_caps.h"
+
+namespace esphome::cdc_acm_uart {
+
+static const char *const TAG = "cdc_acm_uart";
+
+static constexpr size_t UART_TASK_STACK_SIZE = 4096;
+static constexpr size_t RINGBUF_RETRY_CHUNK_SIZE = 64;
+static constexpr uint32_t LOG_THROTTLE_MS = 1000;
+static constexpr uint32_t UART_RELOAD_SETTLE_MS = 20;
+// Above the default priority but below the USB/Wi-Fi system tasks.
+static constexpr UBaseType_t TASK_PRIORITY = 4;
+
+static bool should_log_now(uint32_t *last_ms, uint32_t interval_ms) {
+  uint32_t now = millis();
+  if ((now - *last_ms) >= interval_ms) {
+    *last_ms = now;
+    return true;
+  }
+  return false;
+}
+
+static bool ringbuf_send_with_retry(RingbufHandle_t ringbuf, const uint8_t *data, size_t len, uint32_t *log_ms) {
+  if (len == 0) {
+    return true;
+  }
+
+  if (xRingbufferSend(ringbuf, data, len, pdMS_TO_TICKS(1)) == pdTRUE) {
+    return true;
+  }
+
+  size_t offset = 0;
+  while (offset < len) {
+    size_t chunk = std::min(RINGBUF_RETRY_CHUNK_SIZE, len - offset);
+    if (xRingbufferSend(ringbuf, data + offset, chunk, pdMS_TO_TICKS(1)) != pdTRUE) {
+      if (should_log_now(log_ms, LOG_THROTTLE_MS)) {
+        ESP_LOGW(TAG, "USB TX buffer full; some data is lost");
+      }
+      return false;
+    }
+    offset += chunk;
+  }
+  return true;
+}
+
+void CDCACMUARTBridge::setup() {
+  // Line state starts deasserted (no host yet); active-low DTR#/RTS# wiring is
+  // handled by configuring the pins inverted, so deasserted idles HIGH.
+  if (this->dtr_pin_ != nullptr) {
+    this->dtr_pin_->setup();
+    this->dtr_pin_->digital_write(false);
+  }
+
+  if (this->rts_pin_ != nullptr) {
+    this->rts_pin_->setup();
+    this->rts_pin_->digital_write(false);
+  }
+
+  // A failed UART never assigned its port number, so the worker tasks would run
+  // against an indeterminate port.
+  if (this->uart_parent_->is_failed()) {
+    ESP_LOGE(TAG, "UART parent failed; aborting");
+    this->mark_failed();
+    return;
+  }
+
+  this->configured_baud_rate_ = this->uart_parent_->get_baud_rate();
+  this->configured_parity_ = this->uart_parent_->get_parity();
+  this->configured_stop_bits_ = this->uart_parent_->get_stop_bits();
+  this->configured_data_bits_ = this->uart_parent_->get_data_bits();
+
+  // usb_cdc_acm sets up first (priority IO > HARDWARE). Any interface failing marks
+  // the hub failed, and a failed hub no longer runs loop(), so line coding and line
+  // state events would never reach this bridge even if its own interface is healthy.
+  if (this->usb_cdc_parent_->get_parent()->is_failed()) {
+    ESP_LOGE(TAG, "USB CDC ACM failed; aborting");
+    this->mark_failed();
+    return;
+  }
+
+  // Per-instance task names (keyed on the CDC interface number) keep task dumps
+  // unambiguous with multiple bridges.
+  char tx_task_name[] = "cdc_uart_tx_0";
+  char rx_task_name[] = "cdc_uart_rx_0";
+  const char itf_char = format_hex_char(this->usb_cdc_parent_->get_itf());
+  tx_task_name[sizeof(tx_task_name) - 2] = itf_char;
+  rx_task_name[sizeof(rx_task_name) - 2] = itf_char;
+
+  xTaskCreate(uart_tx_task_fn, tx_task_name, UART_TASK_STACK_SIZE, this, TASK_PRIORITY, &this->uart_tx_task_handle_);
+  if (this->uart_tx_task_handle_ == nullptr) {
+    ESP_LOGE(TAG, "Failed to create UART TX task");
+    this->mark_failed();
+    return;
+  }
+
+  xTaskCreate(uart_rx_task_fn, rx_task_name, UART_TASK_STACK_SIZE, this, TASK_PRIORITY, &this->uart_rx_task_handle_);
+  if (this->uart_rx_task_handle_ == nullptr) {
+    ESP_LOGE(TAG, "Failed to create UART RX task");
+    vTaskDelete(this->uart_tx_task_handle_);
+    this->uart_tx_task_handle_ = nullptr;
+    this->mark_failed();
+    return;
+  }
+
+  // Only register callbacks once both tasks exist, so a failed setup never drives
+  // DTR/RTS from a dead bridge.
+  this->usb_cdc_parent_->set_line_state_callback([this](bool dtr, bool rts) { this->set_line_state(dtr, rts); });
+  this->usb_cdc_parent_->set_line_coding_callback([this](uint32_t, uint8_t, uint8_t, uint8_t) {
+    this->host_coding_seen_ = true;
+    // Another component owns the UART's framing while paused; resume() re-syncs.
+    if (this->paused_ == 0) {
+      this->set_line_coding();
+    }
+  });
+
+  // Release the workers only now: until here a failed setup may still delete the TX
+  // task, which is safe only while it is parked and owns nothing in the driver.
+  xTaskNotifyGive(this->uart_tx_task_handle_);
+  xTaskNotifyGive(this->uart_rx_task_handle_);
+
+  // loop() only services line-coding reloads; stay off the main loop until one is
+  // scheduled.
+  this->disable_loop();
+}
+
+void CDCACMUARTBridge::dump_config() {
+  ESP_LOGCONFIG(TAG,
+                "CDC-ACM UART Bridge:\n"
+                "  UART Bus: %u\n"
+                "  USB CDC Interface: %u",
+                this->uart_parent_->get_hw_serial_number(), this->usb_cdc_parent_->get_itf());
+  LOG_PIN("  DTR Pin: ", this->dtr_pin_);
+  LOG_PIN("  RTS Pin: ", this->rts_pin_);
+}
+
+void CDCACMUARTBridge::on_shutdown() {
+  // The UART (BUS) shuts down after this component (HARDWARE) and deletes its driver,
+  // freeing the ring buffer and mutexes the worker tasks block on. Suspending the
+  // tasks unlinks them from those objects first.
+  if (this->uart_rx_task_handle_ != nullptr) {
+    vTaskSuspend(this->uart_rx_task_handle_);
+  }
+  if (this->uart_tx_task_handle_ != nullptr) {
+    vTaskSuspend(this->uart_tx_task_handle_);
+  }
+}
+
+void CDCACMUARTBridge::loop() {
+  switch (this->state_) {
+    case MainState::MAIN_STATE_RELOAD_PENDING:
+      if ((App.get_loop_component_start_time() - this->reload_requested_at_) < UART_RELOAD_SETTLE_MS) {
+        return;
+      }
+      // Deliberately not gated on tx_idle_(): a host that re-codes the line mid-stream
+      // wants the new framing now, and its own in-flight bytes are its concern.
+      // apply_settings_live() rewrites the framing registers without reinstalling the
+      // driver, so the worker tasks blocked inside it are undisturbed.
+      this->uart_parent_->apply_settings_live();
+      this->state_ = MainState::MAIN_STATE_RUNNING;
+      break;
+    case MainState::MAIN_STATE_PAUSING:
+    case MainState::MAIN_STATE_RESUMING:
+      // Let a host write that was in flight drain, FIFO included, before a reload
+      // flushes the FIFOs and truncates it.
+      if (!this->tx_idle_()) {
+        return;
+      }
+      if (this->state_ == MainState::MAIN_STATE_PAUSING) {
+        this->restore_configured_framing_();
+        this->state_ = MainState::MAIN_STATE_PAUSED;
+      } else {
+        this->finish_resume_();
+      }
+      break;
+    default:
+      break;
+  }
+  this->disable_loop();
+}
+
+void CDCACMUARTBridge::set_line_coding() {
+  if (!this->sync_host_framing_()) {
+    return;
+  }
+  // Coalesce rapid line-coding updates from the host.
+  this->reload_requested_at_ = App.get_loop_component_start_time();
+  this->state_ = MainState::MAIN_STATE_RELOAD_PENDING;
+  // Main-loop context (via USBCDCACMInstance::process_events_).
+  this->enable_loop();
+}
+
+bool CDCACMUARTBridge::sync_host_framing_() {
+  // usb_cdc_acm has already translated the wire coding onto the CDC instance (main
+  // loop); mirror it here so the framing translation has a single source of truth.
+  bool changed = false;
+
+  // Reject 0 (the CDC B0/hang-up encoding; older IDF revisions divide by the rate)
+  // and rates above the SoC ceiling. Anything in between is the driver's call,
+  // matching what a YAML-configured UART accepts.
+  const uint32_t baud = this->usb_cdc_parent_->get_baud_rate();
+  if (baud == 0 || baud > SOC_UART_BITRATE_MAX) {
+    ESP_LOGW(TAG, "Ignoring unsupported baud rate %" PRIu32 " from host; keeping %" PRIu32, baud,
+             this->uart_parent_->get_baud_rate());
+  } else if (this->uart_parent_->get_baud_rate() != baud) {
+    this->uart_parent_->set_baud_rate(baud);
+    changed = true;
+  }
+
+  const uint8_t stop_bits = this->usb_cdc_parent_->get_stop_bits();
+  if (this->uart_parent_->get_stop_bits() != stop_bits) {
+    this->uart_parent_->set_stop_bits(stop_bits);
+    changed = true;
+  }
+
+  const auto parity = this->usb_cdc_parent_->get_parity();
+  if (this->uart_parent_->get_parity() != parity) {
+    this->uart_parent_->set_parity(parity);
+    changed = true;
+  }
+
+  // USB CDC permits data-bit counts the UART cannot represent (up to 16).
+  const uint8_t data_bits = this->usb_cdc_parent_->get_data_bits();
+  if (data_bits < 5 || data_bits > 8) {
+    ESP_LOGW(TAG, "Ignoring unsupported data bits %u from host; keeping %u", data_bits,
+             this->uart_parent_->get_data_bits());
+  } else if (this->uart_parent_->get_data_bits() != data_bits) {
+    this->uart_parent_->set_data_bits(data_bits);
+    changed = true;
+  }
+
+  if (changed) {
+    ESP_LOGV(TAG, "Line coding: baud=%" PRIu32 ", data_bits=%u, stop_bits=%u, parity=%u",
+             this->uart_parent_->get_baud_rate(), this->uart_parent_->get_data_bits(),
+             this->uart_parent_->get_stop_bits(), static_cast<uint8_t>(this->uart_parent_->get_parity()));
+  }
+  return changed;
+}
+
+void CDCACMUARTBridge::pause() {
+  if (this->state_ == MainState::MAIN_STATE_PAUSING || this->state_ == MainState::MAIN_STATE_PAUSED) {
+    return;
+  }
+  this->paused_ = 1;
+  // A null RX task means setup() has not completed (or failed): nothing to stop, and
+  // the framing snapshot does not exist yet. Should setup() run later, the RX task
+  // starts parked.
+  if (this->uart_rx_task_handle_ == nullptr) {
+    this->state_ = MainState::MAIN_STATE_PAUSED;
+    return;
+  }
+  // Drops a coalesced host reload or a pending resume; loop() restores the framing
+  // once any host write in flight has drained.
+  this->state_ = MainState::MAIN_STATE_PAUSING;
+  this->enable_loop();
+}
+
+void CDCACMUARTBridge::resume() {
+  if (this->state_ != MainState::MAIN_STATE_PAUSING && this->state_ != MainState::MAIN_STATE_PAUSED) {
+    return;
+  }
+  if (this->uart_rx_task_handle_ == nullptr) {
+    this->paused_ = 0;
+    this->state_ = MainState::MAIN_STATE_RUNNING;
+    return;
+  }
+  // A restore still waiting on the TX side is moot: the host's framing is kept.
+  if (!this->tx_idle_()) {
+    this->state_ = MainState::MAIN_STATE_RESUMING;
+    this->enable_loop();
+    return;
+  }
+  this->finish_resume_();
+  this->disable_loop();
+}
+
+void CDCACMUARTBridge::finish_resume_() {
+  // Take the bus back at a known framing before either task runs again: the host's
+  // if it ever sent one, else the YAML framing (the other owner may have changed it).
+  if (this->host_coding_seen_) {
+    this->sync_host_framing_();
+    this->uart_parent_->apply_settings_live();
+  } else {
+    this->restore_configured_framing_();
+  }
+  this->paused_ = 0;
+  this->state_ = MainState::MAIN_STATE_RUNNING;
+  this->drive_line_state_();
+  xTaskNotifyGive(this->uart_rx_task_handle_);
+}
+
+bool CDCACMUARTBridge::tx_idle_() {
+  const auto uart_num = static_cast<uart_port_t>(this->uart_parent_->get_hw_serial_number());
+  return this->tx_busy_ == 0 && uart_wait_tx_done(uart_num, 0) == ESP_OK;
+}
+
+void CDCACMUARTBridge::restore_configured_framing_() {
+  // Always applied: the cached settings can lead the hardware by a pending reload,
+  // so they are no proof of what is live.
+  this->uart_parent_->set_baud_rate(this->configured_baud_rate_);
+  this->uart_parent_->set_parity(this->configured_parity_);
+  this->uart_parent_->set_stop_bits(this->configured_stop_bits_);
+  this->uart_parent_->set_data_bits(this->configured_data_bits_);
+  this->uart_parent_->apply_settings_live();
+}
+
+void CDCACMUARTBridge::set_line_state(bool dtr, bool rts) {
+  ESP_LOGV(TAG, "Line state: DTR=%d, RTS=%d", dtr, rts);
+  this->host_dtr_ = dtr;
+  this->host_rts_ = rts;
+  // Frozen while paused: a host opening the port must not reset a peer that another
+  // component is talking to.
+  if (this->paused_ == 0) {
+    this->drive_line_state_();
+  }
+}
+
+void CDCACMUARTBridge::drive_line_state_() {
+  if (this->dtr_pin_ != nullptr) {
+    this->dtr_pin_->digital_write(this->host_dtr_);
+  }
+  if (this->rts_pin_ != nullptr) {
+    this->rts_pin_->digital_write(this->host_rts_);
+  }
+}
+
+void CDCACMUARTBridge::uart_rx_task_fn(void *arg) {
+  auto *bridge = static_cast<CDCACMUARTBridge *>(arg);
+  bridge->uart_rx_task_();
+}
+
+void CDCACMUARTBridge::uart_tx_task_fn(void *arg) {
+  auto *bridge = static_cast<CDCACMUARTBridge *>(arg);
+  bridge->uart_tx_task_();
+}
+
+void CDCACMUARTBridge::uart_rx_task_() {
+  TaskHandle_t usb_tx_handle = this->usb_cdc_parent_->get_tx_task_handle();
+  RingbufHandle_t usb_tx_ringbuf = this->usb_cdc_parent_->get_tx_ringbuf();
+  uart_port_t uart_num = static_cast<uart_port_t>(this->uart_parent_->get_hw_serial_number());
+  // Back-dated so a problem within the first LOG_THROTTLE_MS of uptime still logs.
+  uint32_t tx_full_log_ms = millis() - LOG_THROTTLE_MS;
+  uint32_t err_log_ms = millis() - LOG_THROTTLE_MS;
+
+  uint8_t *data = this->uart_rx_buffer_.data();
+  const size_t buf_size = this->uart_rx_buffer_.size();
+
+  // Released by setup() once both tasks exist.
+  ulTaskNotifyTake(pdTRUE, portMAX_DELAY);
+
+  while (true) {
+    if (this->paused_ != 0) {
+      // Parked until resume() notifies; nothing is read, so the other owner sees
+      // every byte.
+      this->rx_parked_ = 1;
+      ulTaskNotifyTake(pdTRUE, portMAX_DELAY);
+      this->rx_parked_ = 0;
+      continue;
+    }
+
+    // Block until at least one byte is available from UART.
+    int total_rx_size = uart_read_bytes(uart_num, data, 1, pdMS_TO_TICKS(UART_RX_WAIT_MS));
+    if (total_rx_size < 0) {
+      if (should_log_now(&err_log_ms, LOG_THROTTLE_MS)) {
+        ESP_LOGE(TAG, "UART read failed: %d", total_rx_size);
+      }
+      vTaskDelay(pdMS_TO_TICKS(10));
+      continue;
+    }
+    if (total_rx_size == 0) {
+      continue;
+    }
+    // pause() landed during the read: don't forward a byte to a host that is gone.
+    if (this->paused_ != 0) {
+      continue;
+    }
+
+    // Drain the currently buffered burst without waiting.
+    while (true) {
+      int rx_data_size = uart_read_bytes(uart_num, data + total_rx_size, buf_size - total_rx_size, 0);
+      if (rx_data_size < 0) {
+        if (should_log_now(&err_log_ms, LOG_THROTTLE_MS)) {
+          ESP_LOGE(TAG, "UART read failed: %d", rx_data_size);
+        }
+        break;
+      }
+      if (rx_data_size == 0) {
+        break;
+      }
+      ESP_LOGV(TAG, "UART RX: %d bytes", rx_data_size);
+      total_rx_size += rx_data_size;
+      if (total_rx_size >= (int) buf_size) {
+        break;
+      }
+    }
+
+    ringbuf_send_with_retry(usb_tx_ringbuf, data, total_rx_size, &tx_full_log_ms);
+
+    ESP_LOGV(TAG, "UART RX: waking up USB TX task");
+    xTaskNotifyGive(usb_tx_handle);
+  }
+}
+
+void CDCACMUARTBridge::uart_tx_task_() {
+  RingbufHandle_t usb_rx_ringbuf = this->usb_cdc_parent_->get_rx_ringbuf();
+  uart_port_t uart_num = static_cast<uart_port_t>(this->uart_parent_->get_hw_serial_number());
+  uint8_t *data_to_uart = this->uart_tx_buffer_.data();
+  const size_t buf_size = this->uart_tx_buffer_.size();
+  size_t rx_size;
+  // Back-dated so a problem within the first LOG_THROTTLE_MS of uptime still logs.
+  uint32_t err_log_ms = millis() - LOG_THROTTLE_MS;
+  uint32_t drop_log_ms = millis() - LOG_THROTTLE_MS;
+
+  // Released by setup() once both tasks exist.
+  ulTaskNotifyTake(pdTRUE, portMAX_DELAY);
+
+  while (true) {
+    ESP_LOGV(TAG, "Waiting for data to send to UART");
+    esp_err_t ret = usb_cdc_acm::ringbuf_read_bytes(usb_rx_ringbuf, data_to_uart, buf_size, &rx_size, portMAX_DELAY);
+
+    if (ret != ESP_OK) {
+      if (should_log_now(&err_log_ms, LOG_THROTTLE_MS)) {
+        ESP_LOGE(TAG, "USB RX RingBuf read failed");
+      }
+      // Yield: this task runs above the main loop, so a persistent failure must not
+      // become a tight loop.
+      vTaskDelay(pdMS_TO_TICKS(10));
+      continue;
+    }
+
+    // Another component owns the UART; host bytes must not interleave with its traffic.
+    // tx_busy_ goes up before the check so is_paused() cannot miss a write in flight.
+    this->tx_busy_ = 1;
+    if (this->paused_ != 0) {
+      this->tx_busy_ = 0;
+      if (should_log_now(&drop_log_ms, LOG_THROTTLE_MS)) {
+        ESP_LOGW(TAG, "Paused; dropping %zu bytes from host", rx_size);
+      }
+      continue;
+    }
+
+    ESP_LOGV(TAG, "Sending %zu bytes to UART", rx_size);
+    // Signed: uart_write_bytes() returns -1 on error.
+    int xfer_size = uart_write_bytes(uart_num, data_to_uart, rx_size);
+    this->tx_busy_ = 0;
+
+    if (xfer_size < 0) {
+      if (should_log_now(&err_log_ms, LOG_THROTTLE_MS)) {
+        ESP_LOGE(TAG, "UART write failed: %d", xfer_size);
+      }
+    } else if (static_cast<size_t>(xfer_size) != rx_size) {
+      ESP_LOGW(TAG, "UART write incomplete (%d/%zu bytes)", xfer_size, rx_size);
+    }
+  }
+}
+
+}  // namespace esphome::cdc_acm_uart
+#endif

esphome/components/cdc_acm_uart/bridge/cdc_acm_uart_bridge.h

@@ -0,0 +1,118 @@
+#pragma once
+#if defined(USE_ESP32_VARIANT_ESP32P4) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
+#include "esphome/components/uart/uart_component_esp_idf.h"
+#include "esphome/components/usb_cdc_acm/usb_cdc_acm.h"
+#include "esphome/core/component.h"
+
+#include <array>
+#include <atomic>
+#include "sdkconfig.h"
+
+namespace esphome::cdc_acm_uart {
+
+class CDCACMUARTBridge final : public Component {
+ public:
+  // Upper bound on the RX task's blocking read, so pause() takes effect without
+  // aborting the read. Arriving bytes still unblock it immediately.
+  static constexpr uint32_t UART_RX_WAIT_MS = 250;
+
+  CDCACMUARTBridge(uart::IDFUARTComponent *uart_parent, usb_cdc_acm::USBCDCACMInstance *usb_cdc_parent)
+      : uart_parent_(uart_parent), usb_cdc_parent_(usb_cdc_parent) {}
+
+  void setup() override;
+  void loop() override;
+  void dump_config() override;
+  void on_shutdown() override;
+  float get_setup_priority() const override { return setup_priority::HARDWARE; }
+
+  void set_dtr_pin(GPIOPin *dtr_pin) { this->dtr_pin_ = dtr_pin; }
+  void set_rts_pin(GPIOPin *rts_pin) { this->rts_pin_ = rts_pin; }
+
+  void set_line_coding();
+  void set_line_state(bool dtr, bool rts);
+  uart::IDFUARTComponent *get_uart_parent() const { return this->uart_parent_; }
+
+  /**
+   * Stop forwarding in both directions and hand the UART back to its configured
+   * framing, so another component may use the bus. Main-loop only. The RX task parks
+   * within UART_RX_WAIT_MS (a byte it was already reading is discarded). A host write
+   * already in flight is allowed to drain first, which at low baud rates can take
+   * seconds; the framing is restored only after that, so poll is_paused() rather than
+   * waiting a fixed interval. Host bytes not yet written to the UART are discarded.
+   * The DTR/RTS outputs hold their state while paused and follow the host again on
+   * resume().
+   */
+  void pause();
+  /**
+   * Re-apply the host's line coding and line state, then resume forwarding. Main-loop
+   * only. Deferred until any host write still draining has finished, so the reload
+   * never truncates it.
+   */
+  void resume();
+  /// True once both worker tasks are off the bus and the configured framing is restored.
+  /// With no RX task (setup() failed or has not run) there is nothing to wait for.
+  bool is_paused() const {
+    return this->state_ == MainState::MAIN_STATE_PAUSED &&
+           (this->uart_rx_task_handle_ == nullptr || this->rx_parked_ != 0);
+  }
+
+ protected:
+  static void uart_rx_task_fn(void *arg);
+  static void uart_tx_task_fn(void *arg);
+  void uart_rx_task_();
+  void uart_tx_task_();
+  void restore_configured_framing_();
+  // True when the TX task has no write in flight and the UART TX FIFO has drained.
+  bool tx_idle_();
+  void finish_resume_();
+  void drive_line_state_();
+  // Copy the host's line coding onto the UART settings; true if anything changed.
+  bool sync_host_framing_();
+
+  TaskHandle_t uart_rx_task_handle_{nullptr};
+  TaskHandle_t uart_tx_task_handle_{nullptr};
+
+  GPIOPin *dtr_pin_{nullptr};
+  GPIOPin *rts_pin_{nullptr};
+
+  uint32_t reload_requested_at_{0};
+
+  // Worker staging, each sized to the CDC ring buffer it feeds or drains.
+  std::array<uint8_t, CONFIG_TINYUSB_CDC_TX_BUFSIZE> uart_rx_buffer_{};
+  std::array<uint8_t, CONFIG_TINYUSB_CDC_RX_BUFSIZE> uart_tx_buffer_{};
+
+  uart::IDFUARTComponent *uart_parent_;
+  usb_cdc_acm::USBCDCACMInstance *usb_cdc_parent_;
+
+  // YAML framing, captured at setup; the host's line coding overwrites the UART's
+  // settings, so pause() needs the original to restore.
+  uint32_t configured_baud_rate_{0};
+  uart::UARTParityOptions configured_parity_{uart::UART_CONFIG_PARITY_NONE};
+  uint8_t configured_stop_bits_{0};
+  uint8_t configured_data_bits_{0};
+
+  // Written on the main loop, read by both worker tasks. uint8_t rather than bool:
+  // GCC on Xtensa emits an out-of-line call for atomic<bool>.
+  std::atomic<uint8_t> paused_{0};
+  // Raised by the RX task while parked and by the TX task around each UART write, so
+  // the pause hand-off knows when the bus is actually free.
+  std::atomic<uint8_t> rx_parked_{0};
+  std::atomic<uint8_t> tx_busy_{0};
+  // Main-loop state; paused_ mirrors it for the worker tasks.
+  enum class MainState : uint8_t {
+    MAIN_STATE_RUNNING,
+    MAIN_STATE_RELOAD_PENDING,  // host line coding debounced, forwarding continues
+    MAIN_STATE_PAUSING,         // waiting for TX idle to restore the configured framing
+    MAIN_STATE_PAUSED,
+    MAIN_STATE_RESUMING,  // resume() requested while a host write still drains
+  };
+  MainState state_{MainState::MAIN_STATE_RUNNING};
+  // Host line state, recorded even while paused so resume() can re-drive the pins.
+  bool host_dtr_{false};
+  bool host_rts_{false};
+  // True once the host has sent any line coding; resume() then re-syncs to it.
+  bool host_coding_seen_{false};
+};
+
+}  // namespace esphome::cdc_acm_uart
+#endif

esphome/components/const/__init__.py

@@ -30,6 +30,7 @@ CONF_KEYS = "keys"
 CONF_LABEL = "label"
 CONF_LIBRETINY = "libretiny"
 CONF_LOOP = "loop"
+CONF_MANUFACTURER = "manufacturer"
 CONF_NOX_INDEX = "nox_index"
 CONF_ON_PACKET = "on_packet"
 CONF_ON_RECEIVE = "on_receive"

esphome/components/coolix/climate.py

@@ -1,5 +1,5 @@
 import esphome.codegen as cg
-from esphome.components import climate_ir
+from esphome.components import climate_ir, remote_base
 from esphome.types import ConfigType
 
 AUTO_LOAD = ["climate_ir"]
@@ -12,4 +12,5 @@ CONFIG_SCHEMA = climate_ir.climate_ir_with_receiver_schema(CoolixClimate)
 
 
 async def to_code(config: ConfigType) -> None:
+    remote_base.request_protocol("coolix")  # used from C++
     await climate_ir.new_climate_ir(config)

esphome/components/copy/switch/copy_switch.cpp

@@ -13,12 +13,6 @@ void CopySwitch::setup() {
 
 void CopySwitch::dump_config() { LOG_SWITCH("", "Copy Switch", this); }
 
-void CopySwitch::write_state(bool state) {
-  if (state) {
-    source_->turn_on();
-  } else {
-    source_->turn_off();
-  }
-}
+void CopySwitch::write_state(bool state) { this->source_->control(state); }
 
 }  // namespace esphome::copy

esphome/components/debug/sensor.py

@@ -23,11 +23,7 @@ from esphome.const import (
 )
 from esphome.types import ConfigType
 
-from . import (  # noqa: F401  pylint: disable=unused-import
-    CONF_DEBUG_ID,
-    FILTER_SOURCE_FILES,
-    DebugComponent,
-)
+from . import CONF_DEBUG_ID, FILTER_SOURCE_FILES, DebugComponent  # noqa: F401  pylint: disable=unused-import
 
 DEPENDENCIES = ["debug"]
 

esphome/components/debug/text_sensor.py

@@ -9,11 +9,7 @@ from esphome.const import (
 )
 from esphome.types import ConfigType
 
-from . import (  # noqa: F401  pylint: disable=unused-import
-    CONF_DEBUG_ID,
-    FILTER_SOURCE_FILES,
-    DebugComponent,
-)
+from . import CONF_DEBUG_ID, FILTER_SOURCE_FILES, DebugComponent  # noqa: F401  pylint: disable=unused-import
 
 DEPENDENCIES = ["debug"]
 

esphome/components/deep_sleep/deep_sleep_bk72xx.cpp

@@ -44,7 +44,7 @@ bool DeepSleepComponent::prepare_to_sleep_() {
           this->status_set_warning();
           ESP_LOGV(TAG, "Waiting for pin to switch state to enter deep sleep...");
         }
-        this->next_enter_deep_sleep_ = true;
+        this->defer_sleep_();
         return false;
       }
     }

esphome/components/deep_sleep/deep_sleep_component.cpp

@@ -17,6 +17,7 @@ void DeepSleepComponent::setup() {
 
 void DeepSleepComponent::schedule_sleep_() {
   this->next_enter_deep_sleep_ = false;
+  this->disable_loop();
   const optional<uint32_t> run_duration = get_run_duration_();
   if (run_duration.has_value()) {
     ESP_LOGI(TAG, "Scheduling in %" PRIu32 " ms", *run_duration);
@@ -45,7 +46,7 @@ void DeepSleepComponent::loop() {
 
 void DeepSleepComponent::begin_sleep(bool manual) {
   if (this->prevent_ && !manual) {
-    this->next_enter_deep_sleep_ = true;
+    this->defer_sleep_();
     return;
   }
 

esphome/components/deep_sleep/deep_sleep_component.h

@@ -190,6 +190,11 @@ class DeepSleepComponent final : public Component {
   void schedule_sleep_();
   bool should_teardown_();
 
+  void defer_sleep_() {
+    this->next_enter_deep_sleep_ = true;
+    this->enable_loop();
+  }
+
 #ifdef USE_BK72XX
   bool pin_prevents_sleep_(WakeUpPinItem &pin_item) const;
   bool get_real_pin_state_(InternalGPIOPin &pin) const { return (pin.digital_read() ^ pin.is_inverted()); }

esphome/components/deep_sleep/deep_sleep_esp32.cpp

@@ -100,7 +100,7 @@ bool DeepSleepComponent::prepare_to_sleep_() {
       this->status_set_warning();
       ESP_LOGW(TAG, "Waiting for wakeup pin state change");
     }
-    this->next_enter_deep_sleep_ = true;
+    this->defer_sleep_();
     return false;
   }
   return true;

esphome/components/display/display.cpp

@@ -3,6 +3,7 @@
 #include <utility>
 #include <numbers>
 #include "display_color_utils.h"
+#include "esphome/core/application.h"
 #include "esphome/core/hal.h"
 #include "esphome/core/log.h"
 
@@ -770,10 +771,12 @@ Rect Display::get_clipping() const {
 
 void Display::clear_clipping_() { this->clipping_rectangle_.clear(); }
 
+void Display::feed_wdt_pixel_slow_() { App.feed_wdt(); }
+
 bool Display::clip(int x, int y) {
   if (x < 0 || x >= this->get_width() || y < 0 || y >= this->get_height())
     return false;
-  if (!this->get_clipping().inside(x, y))
+  if (this->is_point_clipped(x, y))
     return false;
   return true;
 }

esphome/components/display/display.h

@@ -758,6 +758,13 @@ class Display : public PollingComponent {
 
   bool is_clipping() const { return !this->clipping_rectangle_.empty(); }
 
+  /// Whether (x, y) falls outside the active clipping rectangle. Tests the
+  /// stack top in place: get_clipping() is out of line and returns the Rect
+  /// by value, which per pixel drawing cannot afford.
+  bool ESPHOME_ALWAYS_INLINE is_point_clipped(int x, int y) const {
+    return this->is_clipping() && !this->clipping_rectangle_.back().inside(x, y);
+  }
+
   /** Check if pixel is within region of display.
    */
   bool clip(int x, int y);
@@ -774,6 +781,17 @@ class Display : public PollingComponent {
   void do_update_();
   void clear_clipping_();
 
+  /// Watchdog feed for per pixel loops. App.feed_wdt() is already rate
+  /// limited, but every call reads the clock; only every 256th pixel makes
+  /// that call, so the real feeds are unchanged and a pixel costs a counter.
+  /// At 20 us per pixel on the slowest e-paper path that is about 5 ms
+  /// between clock reads.
+  void ESPHOME_ALWAYS_INLINE feed_wdt_per_pixel_() {
+    if (++this->wdt_pixel_counter_ == 0)
+      this->feed_wdt_pixel_slow_();
+  }
+  void feed_wdt_pixel_slow_();
+
   virtual int get_height_internal() = 0;
   virtual int get_width_internal() = 0;
 
@@ -793,6 +811,7 @@ class Display : public PollingComponent {
   std::vector<DisplayOnPageChangeTrigger *> on_page_change_triggers_;
   bool auto_clear_enabled_{true};
   std::vector<Rect> clipping_rectangle_;
+  uint8_t wdt_pixel_counter_{0};
   bool show_test_card_{false};
 };
 

esphome/components/display/display_buffer.cpp

@@ -2,7 +2,6 @@
 
 #include <utility>
 
-#include "esphome/core/application.h"
 #include "esphome/core/log.h"
 
 namespace esphome::display {
@@ -44,7 +43,7 @@ int DisplayBuffer::get_height() {
 }
 
 void HOT DisplayBuffer::draw_pixel_at(int x, int y, Color color) {
-  if (!this->get_clipping().inside(x, y))
+  if (this->is_point_clipped(x, y))
     return;  // NOLINT
 
   switch (this->rotation_) {
@@ -64,7 +63,7 @@ void HOT DisplayBuffer::draw_pixel_at(int x, int y, Color color) {
       break;
   }
   this->draw_absolute_pixel_internal(x, y, color);
-  App.feed_wdt();
+  this->feed_wdt_per_pixel_();
 }
 
 }  // namespace esphome::display

esphome/components/display/rect.cpp

@@ -63,16 +63,6 @@ bool Rect::equal(Rect rect) const {
   return (rect.x == this->x) && (rect.w == this->w) && (rect.y == this->y) && (rect.h == this->h);
 }
 
-bool Rect::inside(int16_t test_x, int16_t test_y, bool absolute) const {  // NOLINT
-  if (!this->is_set()) {
-    return true;
-  }
-  if (absolute) {
-    return test_x >= this->x && test_x < this->x2() && test_y >= this->y && test_y < this->y2();
-  }
-  return test_x >= 0 && test_x < this->w && test_y >= 0 && test_y < this->h;
-}
-
 bool Rect::inside(Rect rect) const {
   if (!this->is_set() || !rect.is_set()) {
     return true;

esphome/components/display/rect.h

@@ -26,7 +26,15 @@ class Rect {
   void shrink(Rect rect);
 
   bool inside(Rect rect) const;
-  bool inside(int16_t test_x, int16_t test_y, bool absolute = true) const;
+  bool ESPHOME_ALWAYS_INLINE inside(int16_t test_x, int16_t test_y, bool absolute = true) const {
+    if (!this->is_set()) {
+      return true;
+    }
+    if (absolute) {
+      return test_x >= this->x && test_x < this->x2() && test_y >= this->y && test_y < this->y2();
+    }
+    return test_x >= 0 && test_x < this->w && test_y >= 0 && test_y < this->h;
+  }
   bool equal(Rect rect) const;
   void info(const std::string &prefix = "rect info:");
 };

esphome/components/epaper_spi/epaper_spi.cpp

@@ -299,7 +299,7 @@ bool EPaperBase::initialise(bool partial) {
  * @return false if the coordinates are out of bounds
  */
 bool EPaperBase::rotate_coordinates_(int &x, int &y) {
-  if (!this->get_clipping().inside(x, y))
+  if (this->is_point_clipped(x, y))
     return false;
   if (this->effective_transform_ & SWAP_XY)
     std::swap(x, y);

esphome/components/es7210/es7210.cpp

@@ -153,13 +153,14 @@ bool ES7210::configure_mic_gain_() {
   ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_MIC2_GAIN_REG44, 0x0f, regv));
 
   // Configure mic 3
-  ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_CLOCK_OFF_REG01, 0x0b, 0x00));
+  // MIC3 uses the ADC3/4 and MIC3/4 clock domains (bits 2 and 4), not the MIC1/2 domains.
+  ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_CLOCK_OFF_REG01, 0x15, 0x00));
   ES7210_ERROR_CHECK(this->write_byte(ES7210_MIC34_POWER_REG4C, 0x00));
   ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_MIC3_GAIN_REG45, 0x10, 0x10));
   ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_MIC3_GAIN_REG45, 0x0f, regv));
 
   // Configure mic 4
-  ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_CLOCK_OFF_REG01, 0x0b, 0x00));
+  ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_CLOCK_OFF_REG01, 0x15, 0x00));
   ES7210_ERROR_CHECK(this->write_byte(ES7210_MIC34_POWER_REG4C, 0x00));
   ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_MIC4_GAIN_REG46, 0x10, 0x10));
   ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_MIC4_GAIN_REG46, 0x0f, regv));

esphome/components/esp32/__init__.py

@@ -111,6 +111,7 @@ CONF_ENGINEERING_SAMPLE = "engineering_sample"
 CONF_INCLUDE_BUILTIN_IDF_COMPONENTS = "include_builtin_idf_components"
 CONF_ENABLE_LWIP_ASSERT = "enable_lwip_assert"
 CONF_EXECUTE_FROM_PSRAM = "execute_from_psram"
+CONF_FLASH_CHIP = "flash_chip"
 CONF_KEY_ID = "key_id"
 CONF_MINIMUM_CHIP_REVISION = "minimum_chip_revision"
 CONF_NVS_ENCRYPTION = "nvs_encryption"
@@ -189,6 +190,13 @@ PSRAM_XIP_VARIANTS = {
     VARIANT_ESP32S31,
 }
 
+# Variants whose ROM exports a full-format vsnprintf but no vasprintf
+# (esp32c6.rom.newlib-normal.ld). There, the newlib printf engine is only
+# linked because esp_http_client calls vasprintf; see vasprintf_stubs.cpp.
+# The other variants either export both (classic ESP32, nano-format only) or
+# neither, so the engine is already in the image and the wrap saves nothing.
+ROM_VSNPRINTF_WITHOUT_VASPRINTF_VARIANTS = {VARIANT_ESP32C6}
+
 # NVS encryption (HMAC peripheral scheme) is only available on variants that
 # expose the HMAC peripheral (SOC_HMAC_SUPPORTED in soc_caps.h). The original
 # ESP32 and ESP32-C2 do not have it. New variants with an HMAC peripheral
@@ -457,6 +465,20 @@ ESP32_CHIP_REVISIONS = {
     "3.1": "CONFIG_ESP32_REV_MIN_3_1",
 }
 
+# Flash vendor drivers ESP-IDF can link; each costs IRAM plus a 124 B table in DRAM
+# and only the one matching the flash ID is ever used
+ESP32_FLASH_CHIPS = {
+    "gd": "CONFIG_SPI_FLASH_SUPPORT_GD_CHIP",
+    "issi": "CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP",
+    "mxic": "CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP",
+    "winbond": "CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP",
+    "boya": "CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP",
+    "th": "CONFIG_SPI_FLASH_SUPPORT_TH_CHIP",
+    "mxic_opi": "CONFIG_SPI_FLASH_SUPPORT_MXIC_OPI_CHIP",
+}
+FLASH_CHIP_GENERIC = "generic"
+FLASH_CHIP_OPI = "mxic_opi"  # the octal driver, ESP32-S3 only
+
 # Socket limit configuration for ESP-IDF
 # ESP-IDF CONFIG_LWIP_MAX_SOCKETS has range 1-253, default 10
 DEFAULT_MAX_SOCKETS = 10  # ESP-IDF default
@@ -1512,6 +1534,13 @@ def final_validate(config) -> None:
                 path=[CONF_FRAMEWORK, CONF_ADVANCED, CONF_MINIMUM_CHIP_REVISION],
             )
         )
+    if config[CONF_VARIANT] != VARIANT_ESP32S3 and config.get(CONF_FLASH_MODE) == "opi":
+        errs.append(
+            cv.Invalid(
+                f"'{CONF_FLASH_MODE}: opi' is only supported on {VARIANT_ESP32S3}",
+                path=[CONF_FLASH_MODE],
+            )
+        )
     if config[CONF_VARIANT] != VARIANT_ESP32 and advanced[CONF_SRAM1_AS_IRAM]:
         errs.append(
             cv.Invalid(
@@ -1519,6 +1548,25 @@ def final_validate(config) -> None:
                 path=[CONF_FRAMEWORK, CONF_ADVANCED, CONF_SRAM1_AS_IRAM],
             )
         )
+    if (flash_chip := advanced.get(CONF_FLASH_CHIP)) is not None:
+        opi = flash_chip == FLASH_CHIP_OPI
+        if opi and config[CONF_VARIANT] != VARIANT_ESP32S3:
+            errs.append(
+                cv.Invalid(
+                    f"'{CONF_FLASH_CHIP}: {flash_chip}' is only supported on {VARIANT_ESP32S3}",
+                    path=[CONF_FRAMEWORK, CONF_ADVANCED, CONF_FLASH_CHIP],
+                )
+            )
+        elif opi != (config.get(CONF_FLASH_MODE) == "opi"):
+            errs.append(
+                cv.Invalid(
+                    f"'{CONF_FLASH_CHIP}: {flash_chip}' requires '{CONF_FLASH_MODE}: opi'"
+                    if opi
+                    else f"'{CONF_FLASH_CHIP}: {flash_chip}' does not match "
+                    f"'{CONF_FLASH_MODE}: opi'; octal flash uses {FLASH_CHIP_OPI}",
+                    path=[CONF_FRAMEWORK, CONF_ADVANCED, CONF_FLASH_CHIP],
+                )
+            )
     if (
         config[CONF_VARIANT] != VARIANT_ESP32P4
         and config.get(CONF_ENGINEERING_SAMPLE) is not None
@@ -1732,6 +1780,8 @@ CONF_DISABLE_USB_SERIAL_JTAG_SECONDARY = "disable_usb_serial_jtag_secondary"
 CONF_DISABLE_DEV_NULL_VFS = "disable_dev_null_vfs"
 CONF_DISABLE_MBEDTLS_PEER_CERT = "disable_mbedtls_peer_cert"
 CONF_DISABLE_MBEDTLS_PKCS7 = "disable_mbedtls_pkcs7"
+CONF_DISABLE_MBEDTLS_TLS_SERVER = "disable_mbedtls_tls_server"
+CONF_DISABLE_MBEDTLS_TLS_EXTRAS = "disable_mbedtls_tls_extras"
 CONF_DISABLE_REGI2C_IN_IRAM = "disable_regi2c_in_iram"
 CONF_DISABLE_FATFS = "disable_fatfs"
 CONF_ADC_ONESHOT_IN_IRAM = "adc_oneshot_in_iram"
@@ -1746,6 +1796,8 @@ KEY_VFS_TERMIOS_REQUIRED = "vfs_termios_required"
 KEY_USB_SERIAL_JTAG_SECONDARY_REQUIRED = "usb_serial_jtag_secondary_required"
 KEY_MBEDTLS_PEER_CERT_REQUIRED = "mbedtls_peer_cert_required"
 KEY_MBEDTLS_PKCS7_REQUIRED = "mbedtls_pkcs7_required"
+KEY_MBEDTLS_TLS_SERVER_REQUIRED = "mbedtls_tls_server_required"
+KEY_MBEDTLS_TLS_EXTRAS_REQUIRED = "mbedtls_tls_extras_required"
 KEY_FATFS_REQUIRED = "fatfs_required"
 KEY_MBEDTLS_SHA512_REQUIRED = "mbedtls_sha512_required"
 KEY_ADC_ONESHOT_IRAM_REQUIRED = "adc_oneshot_iram_required"
@@ -1830,6 +1882,30 @@ def require_mbedtls_pkcs7() -> None:
     CORE.data[KEY_ESP32][KEY_MBEDTLS_PKCS7_REQUIRED] = True
 
 
+def require_mbedtls_tls_server() -> None:
+    """Mark that the mbedTLS server-side TLS/DTLS handshake is required.
+
+    Call this from components that accept TLS connections (OpenThread's DTLS
+    commissioner does). This prevents CONFIG_MBEDTLS_TLS_CLIENT_ONLY from
+    being selected.
+    """
+    CORE.data[KEY_ESP32][KEY_MBEDTLS_TLS_SERVER_REQUIRED] = True
+
+
+def require_mbedtls_tls_extras(options: Iterable[str] | None = None) -> None:
+    """Mark TLS features disabled by ``disable_mbedtls_tls_extras`` as required.
+
+    ``options`` names the entries of ``MBEDTLS_TLS_EXTRA_OPTIONS`` to keep;
+    omit it to keep all of them. Call this from components that need AES-CCM,
+    deterministic ECDSA signing, static RSA/ECDH key exchange, TLS
+    renegotiation or session tickets, or that run a TLS client against
+    servers ESPHome cannot vet (wpa_supplicant's EAP client). A user-supplied
+    sdkconfig_options value is never overridden either.
+    """
+    required = CORE.data[KEY_ESP32].setdefault(KEY_MBEDTLS_TLS_EXTRAS_REQUIRED, set())
+    required.update(MBEDTLS_TLS_EXTRA_OPTIONS if options is None else options)
+
+
 def require_mbedtls_sha512() -> None:
     """Mark that mbedTLS SHA-384/SHA-512 support is required by a component.
 
@@ -1929,6 +2005,9 @@ FRAMEWORK_SCHEMA = cv.Schema(
                     *ESP32_CHIP_REVISIONS, string=True
                 ),
                 cv.Optional(CONF_SRAM1_AS_IRAM, default=False): cv.boolean,
+                cv.Optional(CONF_FLASH_CHIP): cv.one_of(
+                    FLASH_CHIP_GENERIC, *ESP32_FLASH_CHIPS, lower=True
+                ),
                 # DHCP server is needed for WiFi AP mode. When WiFi component is used,
                 # it will handle disabling DHCP server when AP is not configured.
                 # Default to false (disabled) when WiFi is not used.
@@ -1987,6 +2066,8 @@ FRAMEWORK_SCHEMA = cv.Schema(
                 cv.Optional(CONF_DISABLE_DEV_NULL_VFS, default=True): cv.boolean,
                 cv.Optional(CONF_DISABLE_MBEDTLS_PEER_CERT, default=True): cv.boolean,
                 cv.Optional(CONF_DISABLE_MBEDTLS_PKCS7, default=True): cv.boolean,
+                cv.Optional(CONF_DISABLE_MBEDTLS_TLS_SERVER, default=True): cv.boolean,
+                cv.Optional(CONF_DISABLE_MBEDTLS_TLS_EXTRAS, default=True): cv.boolean,
                 cv.Optional(CONF_DISABLE_REGI2C_IN_IRAM, default=True): cv.boolean,
                 cv.Optional(CONF_ADC_ONESHOT_IN_IRAM, default=False): cv.boolean,
                 cv.Optional(CONF_DISABLE_FATFS, default=True): cv.boolean,
@@ -2302,6 +2383,69 @@ async def _reconcile_certificate_bundle_sdkconfig() -> None:
         set_idf_sdkconfig_default("CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN", True)
 
 
+# TLS features an HTTPS/MQTT client talking to a modern server never
+# negotiates. Static RSA and static ECDH key exchange have no forward secrecy
+# and are gone in TLS 1.3, renegotiation is deprecated, esp-tls never enables
+# session tickets, AES-CCM ciphersuites are not offered by web servers, and
+# deterministic ECDSA only matters when signing with a private key. Together
+# they cost ~10 KB of flash whenever TLS is linked (http_request, mqtt).
+# wpa_supplicant's EAP client is a second TLS client that talks to RADIUS
+# servers ESPHome cannot vet, and a failed EAP handshake leaves the device
+# off the network, so the wifi component re-enables all of these when eap is
+# configured.
+# The EC public key parsing extras stay enabled: they decide whether a peer
+# certificate with a compressed point or explicit curve parameters parses,
+# which no component can know ahead of time.
+MBEDTLS_TLS_EXTRA_OPTIONS = (
+    "CONFIG_MBEDTLS_KEY_EXCHANGE_RSA",
+    "CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA",
+    "CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA",
+    "CONFIG_MBEDTLS_SSL_RENEGOTIATION",
+    "CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS",
+    "CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS",
+    "CONFIG_MBEDTLS_CCM_C",
+    "CONFIG_MBEDTLS_ECDSA_DETERMINISTIC",
+)
+
+# Members of the mbedTLS "TLS Protocol Role" Kconfig choice. Setting one
+# member is only valid when the user has not already chosen another.
+MBEDTLS_TLS_ROLE_OPTIONS = (
+    "CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT",
+    "CONFIG_MBEDTLS_TLS_SERVER_ONLY",
+    "CONFIG_MBEDTLS_TLS_CLIENT_ONLY",
+    "CONFIG_MBEDTLS_TLS_DISABLED",
+)
+
+
+@coroutine_with_priority(CoroPriority.FINAL)
+async def _reconcile_mbedtls_tls_sdkconfig(
+    disable_tls_server: bool, disable_tls_extras: bool
+) -> None:
+    """Trim mbedTLS to what a TLS client needs unless a component asked otherwise.
+
+    Runs at FINAL priority so every require_mbedtls_tls_server() and
+    require_mbedtls_tls_extras() call has happened. Only the server-side
+    handshake (~7 KB) is a separate option; nothing in ESPHome accepts TLS
+    connections, but OpenThread's DTLS commissioner does. A user-supplied
+    sdkconfig_options value always wins; for the TLS role choice, any member
+    the user set leaves the whole choice alone so the pair cannot conflict.
+    """
+    data = CORE.data[KEY_ESP32]
+    sdkconfig = data[KEY_SDKCONFIG_OPTIONS]
+    if (
+        disable_tls_server
+        and not data.get(KEY_MBEDTLS_TLS_SERVER_REQUIRED, False)
+        and not any(option in sdkconfig for option in MBEDTLS_TLS_ROLE_OPTIONS)
+    ):
+        add_idf_sdkconfig_option("CONFIG_MBEDTLS_TLS_CLIENT_ONLY", True)
+        add_idf_sdkconfig_option("CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT", False)
+    if disable_tls_extras:
+        required = data.get(KEY_MBEDTLS_TLS_EXTRAS_REQUIRED, set())
+        for option in MBEDTLS_TLS_EXTRA_OPTIONS:
+            if option not in required:
+                set_idf_sdkconfig_default(option, False)
+
+
 @coroutine_with_priority(CoroPriority.FINAL)
 async def _reconcile_network_sdkconfig() -> None:
     """Reconcile WiFi/Ethernet/Bluetooth/coexistence sdkconfig flags.
@@ -2509,6 +2653,13 @@ async def to_code(config):
     # NVS finds stored preferences by key, so preference key migration is possible
     cg.add_define("USE_PREFERENCE_KEY_LOOKUP")
     cg.add_build_flag("-Wl,-z,noexecstack")
+    # assert(), HAL_ASSERT and ESP_ERROR_CHECK bake __FILE__ into rodata, and
+    # IDF's noflash placement puts the flash driver's copies in DRAM. The
+    # basename keeps the panic output useful at a fraction of the size.
+    # __FILE_NAME__ is a GCC 12 builtin; IDF 5.0 still ships GCC 11.2.
+    if idf_version() >= cv.Version(5, 1, 0):
+        cg.add_build_flag("-D__FILE__=__FILE_NAME__")
+        cg.add_build_flag("-Wno-builtin-macro-redefined")
     # Deferred so KEY_COMPONENTS is fully populated -- see the coroutine.
     CORE.add_job(_finalize_arduino_aware_flags)
     cg.add_define("ESPHOME_BOARD", config[CONF_BOARD])
@@ -2566,6 +2717,17 @@ async def to_code(config):
         else:
             for symbol in ("vprintf", "printf", "fprintf", "vfprintf"):
                 cg.add_build_flag(f"-Wl,--wrap={symbol}")
+            # esp_http_client calls vasprintf, which on the ESP32-C6 is the only
+            # reference to newlib's full printf engine (~20 KB: _svfprintf_r,
+            # _dtoa_r and their helpers); every other caller resolves to the
+            # ROM. See vasprintf_stubs.cpp. The --undefined flag is needed
+            # because libsrc.a is scanned before the IDF libraries that
+            # reference the symbol, so the stub would otherwise never be pulled
+            # from the archive.
+            if variant in ROM_VSNPRINTF_WITHOUT_VASPRINTF_VARIANTS:
+                cg.add_define("USE_ESP32_VASPRINTF_STUB")
+                cg.add_build_flag("-Wl,--wrap=vasprintf")
+                cg.add_build_flag("-Wl,--undefined=__wrap_vasprintf")
     else:
         cg.add_build_flag("-DUSE_ARDUINO")
         cg.add_build_flag("-DUSE_ESP32_FRAMEWORK_ARDUINO")
@@ -2614,6 +2776,8 @@ async def to_code(config):
         add_idf_sdkconfig_option(
             f"CONFIG_ESPTOOLPY_FLASHMODE_{flash_mode.upper()}", True
         )
+        # the opi mode choice only exists once octal flash is enabled
+        add_idf_sdkconfig_option("CONFIG_ESPTOOLPY_OCT_FLASH", flash_mode == "opi")
     if flash_frequency := config.get(CONF_FLASH_FREQUENCY):
         add_idf_sdkconfig_option(
             f"CONFIG_ESPTOOLPY_FLASHFREQ_{flash_frequency[:-3]}M", True
@@ -2643,6 +2807,11 @@ async def to_code(config):
                 add_idf_sdkconfig_option(flag, rev == min_rev)
             cg.add_define("USE_ESP32_MIN_CHIP_REVISION_SET")
 
+    # Keep only the flash vendor driver the board needs; the boot log names it
+    if (flash_chip := conf[CONF_ADVANCED].get(CONF_FLASH_CHIP)) is not None:
+        for chip, flag in ESP32_FLASH_CHIPS.items():
+            add_idf_sdkconfig_option(flag, chip == flash_chip)
+
     # Use SRAM1 region as IRAM on ESP32 (original) variant
     # This provides an additional 40KB of IRAM by using SRAM1 memory that was previously
     # reserved for bootloader DRAM. Requires a bootloader from ESP-IDF v5.1 or later.
@@ -2996,6 +3165,13 @@ async def to_code(config):
     # FINAL priority: runs after every require_certificate_bundle() call
     CORE.add_job(_reconcile_certificate_bundle_sdkconfig)
 
+    # FINAL priority: runs after every require_mbedtls_tls_*() call
+    CORE.add_job(
+        _reconcile_mbedtls_tls_sdkconfig,
+        advanced[CONF_DISABLE_MBEDTLS_TLS_SERVER],
+        advanced[CONF_DISABLE_MBEDTLS_TLS_EXTRAS],
+    )
+
     # FINAL: require_*() calls can come from to_code at or below this priority, so an
     # inline read would be iteration-order-dependent; reconcile once after every job ran.
     CORE.add_job(

esphome/components/esp32/const.py

@@ -3,18 +3,11 @@ import esphome.codegen as cg
 # Re-exported for the many esp32-side users; defined in esphome.const
 # and esphome.espidf so the upload/logs fast path can use them without
 # importing this package.
-from esphome.const import (  # noqa: F401  # pylint: disable=unused-import
-    KEY_ESP32,
-    KEY_FLASH_SIZE,
-    KEY_IDF_VERSION,
-    KEY_VARIANT,
-)
+from esphome.const import KEY_ESP32, KEY_FLASH_SIZE, KEY_IDF_VERSION, KEY_VARIANT  # noqa: F401  # pylint: disable=unused-import
 
 # Back compat for external components only; in-tree callers import it
 # from esphome.espidf directly.
-from esphome.espidf import (  # noqa: F401  # pylint: disable=unused-import
-    variant_to_idf_target,
-)
+from esphome.espidf import variant_to_idf_target  # noqa: F401  # pylint: disable=unused-import
 
 KEY_BOARD = "board"
 KEY_SDKCONFIG_OPTIONS = "sdkconfig_options"

esphome/components/esp32/vasprintf_stubs.cpp

@@ -0,0 +1,53 @@
+/*
+ * Linker wrap stub for vasprintf() on variants whose ROM exports a
+ * full-format vsnprintf() but no vasprintf() (ESP32-C6, newlib only).
+ *
+ * On those chips every snprintf/vsnprintf call in the image resolves to
+ * the ROM, so the newlib printf engine (_svfprintf_r, _dtoa_r and their
+ * helpers, ~20 KB) is not linked at all until something references a
+ * printf-family function the ROM lacks. esp_http_client does exactly that
+ * through vasprintf() in its header and auth helpers, so adding
+ * http_request to a build costs the whole engine on top of the HTTP and
+ * TLS code itself.
+ *
+ * This stub reimplements vasprintf() on top of the ROM vsnprintf(), which
+ * keeps the engine out of the image. It is only compiled in when codegen
+ * defines USE_ESP32_VASPRINTF_STUB, which is gated on the variant's ROM
+ * linker script and on the same newlib condition as printf_stubs.cpp.
+ */
+
+#include "esphome/core/defines.h"
+
+#if defined(USE_ESP_IDF) && defined(USE_ESP32_VASPRINTF_STUB)
+
+#include <cstdarg>
+#include <cstdio>
+#include <cstdlib>
+
+namespace esphome::esp32 {}
+
+// NOLINTBEGIN(bugprone-reserved-identifier,cert-dcl37-c,cert-dcl51-cpp,readability-identifier-naming)
+extern "C" {
+
+int __wrap_vasprintf(char **strp, const char *fmt, va_list ap) {
+  va_list ap_copy;
+  va_copy(ap_copy, ap);
+  int len = vsnprintf(nullptr, 0, fmt, ap_copy);
+  va_end(ap_copy);
+  if (len < 0) {
+    return len;
+  }
+  // vasprintf's contract is a malloc'd buffer the caller releases with free()
+  char *buf = static_cast<char *>(malloc(static_cast<size_t>(len) + 1));  // NOLINT(cppcoreguidelines-no-malloc)
+  if (buf == nullptr) {
+    return -1;
+  }
+  vsnprintf(buf, static_cast<size_t>(len) + 1, fmt, ap);
+  *strp = buf;
+  return len;
+}
+
+}  // extern "C"
+// NOLINTEND(bugprone-reserved-identifier,cert-dcl37-c,cert-dcl51-cpp,readability-identifier-naming)
+
+#endif  // USE_ESP_IDF && USE_ESP32_VASPRINTF_STUB

esphome/components/esp32_ble_server/__init__.py

@@ -3,6 +3,7 @@ import encodings
 from esphome import automation
 import esphome.codegen as cg
 from esphome.components import esp32_ble
+from esphome.components.const import CONF_MANUFACTURER
 from esphome.components.esp32 import request_bluetooth
 from esphome.components.esp32_ble import BTLoggers, bt_uuid
 import esphome.config_validation as cv
@@ -41,7 +42,6 @@ CONF_DESCRIPTORS = "descriptors"
 CONF_ENDIANNESS = "endianness"
 CONF_FIRMWARE_VERSION = "firmware_version"
 CONF_INDICATE = "indicate"
-CONF_MANUFACTURER = "manufacturer"
 CONF_MANUFACTURER_DATA = "manufacturer_data"
 CONF_MAX_CLIENTS = "max_clients"
 CONF_ON_WRITE = "on_write"
@@ -597,7 +597,7 @@ async def to_code(config):
     cg.add(parent.advertising_set_appearance(config[CONF_APPEARANCE]))
     cg.add(var.set_max_clients(config[CONF_MAX_CLIENTS]))
     # Only advertise for the server itself when the configuration gives clients something to
-    # find. A server that is auto-loaded purely to host a runtime service (esp32_improv) stays
+    # find. A server that is auto-loaded purely to host a runtime service (improv_ble) stays
     # silent until that service asks for advertising.
     cg.add(
         var.set_advertising_required(

esphome/components/esp32_ble_server/ble_server.h

@@ -40,7 +40,7 @@ class BLEServer final : public Component, public Parented<ESP32BLE> {
 
   /** Whether this server needs the device to advertise so clients can find and connect to it.
    *
-   * False for a server that only hosts services created at runtime (e.g. esp32_improv), which
+   * False for a server that only hosts services created at runtime (e.g. improv_ble), which
    * request advertising themselves for as long as they need it.
    */
   void set_advertising_required(bool required) { this->advertising_required_ = required; }

esphome/components/esp32_ble_tracker/esp32_ble_tracker.h

@@ -135,7 +135,7 @@ class ESPBTClient : public ESPBTDeviceListener {
   void set_tracker_state_version(uint8_t *version) { this->tracker_state_version_ = version; }
 
   // Memory optimized layout
-  uint8_t app_id;  // App IDs are small integers assigned sequentially
+  uint8_t app_id{0};  // App IDs are small integers assigned sequentially
 
  protected:
   /// Set state without IDLE handling - use for direct state transitions.

esphome/components/esp32_camera/esp32_camera.cpp

@@ -433,25 +433,10 @@ void ESP32Camera::set_pixel_format(ESP32CameraPixelFormat format) {
   }
 }
 void ESP32Camera::set_jpeg_quality(uint8_t quality) { this->config_.jpeg_quality = quality; }
-void ESP32Camera::set_vertical_flip(bool vertical_flip) { this->vertical_flip_ = vertical_flip; }
-void ESP32Camera::set_horizontal_mirror(bool horizontal_mirror) { this->horizontal_mirror_ = horizontal_mirror; }
-void ESP32Camera::set_contrast(int contrast) { this->contrast_ = contrast; }
-void ESP32Camera::set_brightness(int brightness) { this->brightness_ = brightness; }
-void ESP32Camera::set_saturation(int saturation) { this->saturation_ = saturation; }
-void ESP32Camera::set_special_effect(ESP32SpecialEffect effect) { this->special_effect_ = effect; }
 /* set exposure parameters */
-void ESP32Camera::set_aec_mode(ESP32GainControlMode mode) { this->aec_mode_ = mode; }
-void ESP32Camera::set_aec2(bool aec2) { this->aec2_ = aec2; }
-void ESP32Camera::set_ae_level(int ae_level) { this->ae_level_ = ae_level; }
-void ESP32Camera::set_aec_value(uint32_t aec_value) { this->aec_value_ = aec_value; }
 /* set gains parameters */
-void ESP32Camera::set_agc_mode(ESP32GainControlMode mode) { this->agc_mode_ = mode; }
-void ESP32Camera::set_agc_value(uint8_t agc_value) { this->agc_value_ = agc_value; }
-void ESP32Camera::set_agc_gain_ceiling(ESP32AgcGainCeiling gain_ceiling) { this->agc_gain_ceiling_ = gain_ceiling; }
 /* set white balance */
-void ESP32Camera::set_wb_mode(ESP32WhiteBalanceMode mode) { this->wb_mode_ = mode; }
 /* set test mode */
-void ESP32Camera::set_test_pattern(bool test_pattern) { this->test_pattern_ = test_pattern; }
 /* set fps */
 void ESP32Camera::set_max_update_interval(uint32_t max_update_interval) {
   this->max_update_interval_ = max_update_interval;

esphome/components/esp32_camera/esp32_camera.h

@@ -140,25 +140,25 @@ class ESP32Camera final : public camera::Camera {
   void set_pixel_format(ESP32CameraPixelFormat format);
   void set_frame_size(ESP32CameraFrameSize size);
   void set_jpeg_quality(uint8_t quality);
-  void set_vertical_flip(bool vertical_flip);
-  void set_horizontal_mirror(bool horizontal_mirror);
-  void set_contrast(int contrast);
-  void set_brightness(int brightness);
-  void set_saturation(int saturation);
-  void set_special_effect(ESP32SpecialEffect effect);
+  void set_vertical_flip(bool vertical_flip) { this->vertical_flip_ = vertical_flip; }
+  void set_horizontal_mirror(bool horizontal_mirror) { this->horizontal_mirror_ = horizontal_mirror; }
+  void set_contrast(int contrast) { this->contrast_ = contrast; }
+  void set_brightness(int brightness) { this->brightness_ = brightness; }
+  void set_saturation(int saturation) { this->saturation_ = saturation; }
+  void set_special_effect(ESP32SpecialEffect effect) { this->special_effect_ = effect; }
   /* -- exposure */
-  void set_aec_mode(ESP32GainControlMode mode);
-  void set_aec2(bool aec2);
-  void set_ae_level(int ae_level);
-  void set_aec_value(uint32_t aec_value);
+  void set_aec_mode(ESP32GainControlMode mode) { this->aec_mode_ = mode; }
+  void set_aec2(bool aec2) { this->aec2_ = aec2; }
+  void set_ae_level(int ae_level) { this->ae_level_ = ae_level; }
+  void set_aec_value(uint32_t aec_value) { this->aec_value_ = aec_value; }
   /* -- gains */
-  void set_agc_mode(ESP32GainControlMode mode);
-  void set_agc_value(uint8_t agc_value);
-  void set_agc_gain_ceiling(ESP32AgcGainCeiling gain_ceiling);
+  void set_agc_mode(ESP32GainControlMode mode) { this->agc_mode_ = mode; }
+  void set_agc_value(uint8_t agc_value) { this->agc_value_ = agc_value; }
+  void set_agc_gain_ceiling(ESP32AgcGainCeiling gain_ceiling) { this->agc_gain_ceiling_ = gain_ceiling; }
   /* -- white balance */
-  void set_wb_mode(ESP32WhiteBalanceMode mode);
+  void set_wb_mode(ESP32WhiteBalanceMode mode) { this->wb_mode_ = mode; }
   /* -- test */
-  void set_test_pattern(bool test_pattern);
+  void set_test_pattern(bool test_pattern) { this->test_pattern_ = test_pattern; }
   /* -- framerates */
   void set_max_update_interval(uint32_t max_update_interval);
   void set_idle_update_interval(uint32_t idle_update_interval);

esphome/components/esp32_hosted/update/esp32_hosted_update.cpp

@@ -169,7 +169,7 @@ void Esp32HostedUpdate::dump_config() {
   ESP_LOGCONFIG(TAG,
                 "  Mode: HTTP\n"
                 "  Source URL: %s",
-                this->source_url_.c_str());
+                this->source_url_);
 #else
   ESP_LOGCONFIG(TAG,
                 "  Mode: Embedded\n"
@@ -215,7 +215,7 @@ bool Esp32HostedUpdate::fetch_manifest_() {
 
   auto container = this->http_request_parent_->get(this->source_url_);
   if (container == nullptr || container->status_code != 200) {
-    ESP_LOGE(TAG, "Failed to fetch manifest from %s", this->source_url_.c_str());
+    ESP_LOGE(TAG, "Failed to fetch manifest from %s", this->source_url_);
     this->status_set_error(LOG_STR("Failed to fetch manifest"));
     return false;
   }

esphome/components/esp32_hosted/update/esp32_hosted_update.h

@@ -25,7 +25,7 @@ class Esp32HostedUpdate final : public update::UpdateEntity, public PollingCompo
 
 #ifdef USE_ESP32_HOSTED_HTTP_UPDATE
   // HTTP mode setters
-  void set_source_url(const std::string &url) { this->source_url_ = url; }
+  void set_source_url(const char *url) { this->source_url_ = url; }
   void set_http_request_parent(http_request::HttpRequestComponent *parent) { this->http_request_parent_ = parent; }
 #else
   // Embedded mode setters
@@ -38,7 +38,7 @@ class Esp32HostedUpdate final : public update::UpdateEntity, public PollingCompo
 #ifdef USE_ESP32_HOSTED_HTTP_UPDATE
   // HTTP mode members
   http_request::HttpRequestComponent *http_request_parent_{nullptr};
-  std::string source_url_;
+  const char *source_url_{nullptr};  // literal from codegen
   std::string firmware_url_;
 
   // HTTP mode helpers

esphome/components/esp8266/__init__.py

@@ -363,14 +363,6 @@ async def to_code(config: ConfigType) -> None:
     if config.get(CONF_ENABLE_SERIAL1):
         enable_serial1()
 
-    # Arduino 2 has a non-standards conformant new that returns a nullptr instead of failing when
-    # out of memory and exceptions are disabled. Since Arduino 2.6.0, this flag can be used to make
-    # new abort instead. Use it so that OOM fails early (on allocation) instead of on dereference of
-    # a NULL pointer (so the stacktrace makes more sense), and for consistency with Arduino 3,
-    # which always aborts if exceptions are disabled.
-    # For cases where nullptrs can be handled, use nothrow: `new (std::nothrow) T;`
-    cg.add_build_flag("-DNEW_OOM_ABORT")
-
     # Force-include inline std::__throw_* overrides so GCC dead-strips the unused
     # libstdc++ error message strings (e.g. "basic_string::_M_create") from DRAM.
     # See throw_stubs.h for details. Must be prepended before <string>, so this

esphome/components/esp8266_pwm/esp8266_pwm.h

@@ -11,6 +11,9 @@ namespace esphome::esp8266_pwm {
 
 class ESP8266PWM final : public output::FloatOutput, public Component {
  public:
+  // User provided, not "= default": `new(p) ESP8266PWM()` would zero-fill .bss that is already zero.
+  ESP8266PWM() {}
+
   void set_pin(InternalGPIOPin *pin) { pin_ = pin; }
   void set_frequency(float frequency) { this->frequency_ = frequency; }
   /// Dynamically update frequency
@@ -28,7 +31,7 @@ class ESP8266PWM final : public output::FloatOutput, public Component {
  protected:
   void write_state(float state) override;
 
-  InternalGPIOPin *pin_;
+  InternalGPIOPin *pin_{nullptr};
   float frequency_{1000.0};  // Keep in sync with DEFAULT_FREQUENCY in output.py
   /// Cache last output level for dynamic frequency updating
   float last_output_{0.0};

esphome/components/ethernet/ethernet_component_esp32.cpp

@@ -10,9 +10,6 @@
 #include <lwip/dns.h>
 #include <cinttypes>
 #include "esp_event.h"
-#ifdef USE_PSRAM
-#include <esp_psram.h>
-#endif
 
 // IDF 6.0 moved per-chip PHY/MAC drivers to the Espressif Component Registry;
 // they are no longer included via esp_eth.h and need explicit includes.
@@ -74,32 +71,6 @@ static const char *const TAG = "ethernet";
 // PHY register size for hex logging
 static constexpr size_t PHY_REG_SIZE = 2;
 
-// Dual wifi + ethernet SPI builds: the one place internal RAM is short and lwip's other buffers are
-// already in PSRAM. Not with L2 TAP, whose filter lives in the glue's input path this replaces.
-#if defined(USE_PSRAM) && defined(USE_ETHERNET_SPI) && defined(USE_WIFI) && !defined(CONFIG_ESP_NETIF_L2_TAP)
-#define USE_ETHERNET_RX_PSRAM
-// NOLINTNEXTLINE(cppcoreguidelines-avoid-non-const-global-variables) - reported by dump_config()
-static bool rx_psram_installed = false;
-
-// ESP-IDF ethernet drivers malloc() every received frame in internal RAM, where it stays until lwIP
-// hands it to the application. Move it to PSRAM; if that fails the frame is passed on where it is.
-static esp_err_t eth_input_to_psram(esp_eth_handle_t handle, uint8_t *buffer, uint32_t length, void *priv) {
-  auto *copy = static_cast<uint8_t *>(heap_caps_malloc(length, MALLOC_CAP_SPIRAM | MALLOC_CAP_8BIT));
-  if (copy != nullptr) {
-    memcpy(copy, buffer, length);
-    free(buffer);  // NOLINT(cppcoreguidelines-no-malloc) - allocated by the driver with malloc()
-    buffer = copy;
-  } else {
-    static bool warned = false;  // once, this runs per frame in the driver's task
-    if (!warned) {
-      warned = true;
-      ESP_LOGW(TAG, "PSRAM allocation failed, frame kept in internal RAM (reported once)");
-    }
-  }
-  return esp_netif_receive(static_cast<esp_netif_t *>(priv), buffer, length, nullptr);
-}
-#endif
-
 void EthernetComponent::log_error_and_mark_failed_(esp_err_t err, const char *message) {
   ESP_LOGE(TAG, "%s: (%d) %s", message, err, esp_err_to_name(err));
   this->mark_failed();
@@ -482,16 +453,6 @@ void EthernetComponent::ethernet_lazy_init_() {
   /* attach Ethernet driver to TCP/IP stack */
   err = esp_netif_attach(this->eth_netif_, esp_eth_new_netif_glue(this->eth_handle_));
   ESPHL_ERROR_CHECK(err, "ETH netif attach error");
-#ifdef USE_ETHERNET_RX_PSRAM
-  // The glue frees every receive buffer with free(), so the replacement buffer must come from the heap
-  if (esp_psram_is_initialized()) {
-    err = esp_eth_update_input_path(this->eth_handle_, eth_input_to_psram, this->eth_netif_);
-    rx_psram_installed = err == ESP_OK;
-    if (!rx_psram_installed) {
-      ESP_LOGW(TAG, "PSRAM RX path not installed: %s", esp_err_to_name(err));
-    }
-  }
-#endif
 
   // Register user defined event handers
   err = esp_event_handler_register(ETH_EVENT, ESP_EVENT_ANY_ID, &EthernetComponent::eth_event_handler, nullptr);
@@ -669,13 +630,6 @@ void EthernetComponent::dump_config() {
                 this->clk_pin_, this->mdc_pin_, this->mdio_pin_, this->phy_addr_);
 #endif
   ESP_LOGCONFIG(TAG, "  Type: %s", eth_type);
-#ifdef USE_ETHERNET_RX_PSRAM
-  // Only known once the driver is up; with enable_on_boot: false that is after this dump
-  if (this->ethernet_initialized_) {
-    ESP_LOGCONFIG(TAG, "  RX frames: %s",
-                  rx_psram_installed ? LOG_STR_LITERAL("PSRAM") : LOG_STR_LITERAL("internal RAM"));
-  }
-#endif
 }
 
 network::IPAddresses EthernetComponent::get_ip_addresses() {

esphome/components/ethernet_info/ethernet_info_text_sensor.h

@@ -13,6 +13,9 @@ class IPAddressEthernetInfo final : public Component,
                                     public text_sensor::TextSensor,
                                     public ethernet::EthernetIPStateListener {
  public:
+  // User provided, not "= default": `new(p) IPAddressEthernetInfo()` would zero-fill .bss that is already zero.
+  IPAddressEthernetInfo() {}
+
   void setup() override;
   void dump_config() override;
   void add_ip_sensors(uint8_t index, text_sensor::TextSensor *s) { this->ip_sensors_[index] = s; }

esphome/components/fan/fan.h

@@ -183,7 +183,7 @@ class Fan : public EntityBase {
 
   LazyCallbackManager<void()> state_callback_{};
   ESPPreferenceObject rtc_;
-  FanRestoreMode restore_mode_;
+  FanRestoreMode restore_mode_{FanRestoreMode::NO_RESTORE};
 
  private:
   /// Lazy-allocate preset modes vector (never freed — entity lives forever).

esphome/components/gpio/binary_sensor/gpio_binary_sensor.h

@@ -47,6 +47,9 @@ class GPIOBinarySensorStore {
 
 class GPIOBinarySensor final : public binary_sensor::BinarySensor, public Component {
  public:
+  // User provided, not "= default": `new(p) GPIOBinarySensor()` would zero-fill .bss that is already zero.
+  GPIOBinarySensor() {}
+
   // No destructor needed: ESPHome components are created at boot and live forever.
   // Interrupts are only detached on reboot when memory is cleared anyway.
 
@@ -70,7 +73,7 @@ class GPIOBinarySensor final : public binary_sensor::BinarySensor, public Compon
   void loop() override;
 
  protected:
-  GPIOPin *pin_;
+  GPIOPin *pin_{nullptr};
   GPIOBinarySensorStore store_;
 };
 

esphome/components/gpio/switch/gpio_switch.cpp

@@ -13,18 +13,10 @@ void GPIOSwitch::setup() {
   bool initial_state = this->get_initial_state_with_restore_mode().value_or(false);
 
   // write state before setup
-  if (initial_state) {
-    this->turn_on();
-  } else {
-    this->turn_off();
-  }
+  this->control(initial_state);
   this->pin_->setup();
   // write after setup again for other IOs
-  if (initial_state) {
-    this->turn_on();
-  } else {
-    this->turn_off();
-  }
+  this->control(initial_state);
 }
 void GPIOSwitch::dump_config() {
   LOG_SWITCH("", "GPIO Switch", this);

esphome/components/gpio/switch/gpio_switch.h

@@ -9,6 +9,9 @@ namespace esphome::gpio {
 
 class GPIOSwitch final : public switch_::Switch, public Component {
  public:
+  // User provided, not "= default": `new(p) GPIOSwitch()` would zero-fill .bss that is already zero.
+  GPIOSwitch() {}
+
   void set_pin(GPIOPin *pin) { pin_ = pin; }
 
   // ========== INTERNAL METHODS ==========
@@ -25,7 +28,7 @@ class GPIOSwitch final : public switch_::Switch, public Component {
  protected:
   void write_state(bool state) override;
 
-  GPIOPin *pin_;
+  GPIOPin *pin_{nullptr};
 #ifdef USE_GPIO_SWITCH_INTERLOCK
   FixedVector<Switch *> interlock_;
   uint32_t interlock_wait_time_{0};

esphome/components/graphical_display_menu/graphical_display_menu.cpp

@@ -57,10 +57,6 @@ void GraphicalDisplayMenu::dump_config() {
   }
 }
 
-void GraphicalDisplayMenu::set_display(display::Display *display) { this->display_ = display; }
-
-void GraphicalDisplayMenu::set_font(display::BaseFont *font) { this->font_ = font; }
-
 void GraphicalDisplayMenu::set_foreground_color(Color foreground_color) { this->foreground_color_ = foreground_color; }
 void GraphicalDisplayMenu::set_background_color(Color background_color) { this->background_color_ = background_color; }
 

esphome/components/graphical_display_menu/graphical_display_menu.h

@@ -38,8 +38,8 @@ class GraphicalDisplayMenu final : public display_menu_base::DisplayMenuComponen
   void setup() override;
   void dump_config() override;
 
-  void set_display(display::Display *display);
-  void set_font(display::BaseFont *font);
+  void set_display(display::Display *display) { this->display_ = display; }
+  void set_font(display::BaseFont *font) { this->font_ = font; }
   template<typename V> void set_menu_item_value(V menu_item_value) { this->menu_item_value_ = menu_item_value; }
   void set_foreground_color(Color foreground_color);
   void set_background_color(Color background_color);

esphome/components/haier/haier_base.cpp

@@ -190,8 +190,6 @@ void HaierClimateBase::set_supported_presets(climate::ClimatePresetMask presets)
     this->traits_.add_supported_preset(climate::CLIMATE_PRESET_NONE);
 }
 
-void HaierClimateBase::set_send_wifi(bool send_wifi) { this->send_wifi_signal_ = send_wifi; }
-
 void HaierClimateBase::send_custom_command(const haier_protocol::HaierMessage &message) {
   this->action_request_ = PendingAction({ActionRequest::SEND_CUSTOM_COMMAND, message});
 }

esphome/components/haier/haier_base.h

@@ -71,7 +71,7 @@ class HaierClimateBase : public esphome::Component,
   };
   bool can_send_message() const { return haier_protocol_.get_outgoing_queue_size() == 0; };
   void set_answer_timeout(uint32_t timeout);
-  void set_send_wifi(bool send_wifi);
+  void set_send_wifi(bool send_wifi) { this->send_wifi_signal_ = send_wifi; }
   void send_custom_command(const haier_protocol::HaierMessage &message);
   template<typename F> void add_status_message_callback(F &&callback) {
     this->status_message_callback_.add(std::forward<F>(callback));