[noise] Initialize reserved field for gcc 15

gcc 15 extends -Wmissing-field-initializers to designated
initializers; NoiseProtocolId's reserved array was omitted.

.github/workflows/ci-docker.yml

@@ -182,8 +182,6 @@ jobs:
       contents: read  # actions/checkout to load the test configs
     strategy:
       fail-fast: false
-      # Modest cap so this smoke test leaves room on the shared runner pool.
-      max-parallel: 8
       matrix:
         # One entry per distinct toolchain. ESP32 variants (c3/c6/s2/s3/p4)
         # share a toolchain bundle, so esp32 is exercised on the base variant

.github/workflows/ci.yml

@@ -112,6 +112,12 @@ jobs:
       component-test-batches: ${{ steps.determine.outputs.component-test-batches }}
       validate-only-components: ${{ steps.determine.outputs.validate-only-components }}
       benchmarks: ${{ steps.determine.outputs.benchmarks }}
+      # "true" when this run is a pull request into one of the release
+      # branches. Those pull requests are batches of changes already tested on
+      # their original dev pull requests, so several jobs below trade coverage
+      # for turnaround time on them. Matched exactly, not by prefix, so an
+      # ordinary branch named e.g. "release-notes" is not caught by it.
+      release-pr: ${{ github.base_ref == 'beta' || github.base_ref == 'release' }}
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
@@ -230,7 +236,7 @@ jobs:
     runs-on: ubuntu-latest
     needs:
       - determine-jobs
-    if: github.event_name == 'pull_request' && !startsWith(github.base_ref, 'beta') && !startsWith(github.base_ref, 'release') && needs.determine-jobs.outputs.core-ci == 'true'
+    if: github.event_name == 'pull_request' && needs.determine-jobs.outputs.release-pr == 'false' && needs.determine-jobs.outputs.core-ci == 'true'
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
@@ -449,10 +455,21 @@ jobs:
     if: >-
       github.repository == 'esphome/esphome' && (
         (github.event_name == 'push' && github.ref_name == 'dev') ||
-        (github.event_name == 'pull_request' && needs.determine-jobs.outputs.benchmarks == 'true')
+        (
+          github.event_name == 'pull_request' &&
+          needs.determine-jobs.outputs.release-pr == 'false' &&
+          needs.determine-jobs.outputs.benchmarks == 'true'
+        )
       )
     # CodSpeed benchmarks require a CodSpeed account linked to the repository to run
     # (https://codspeed.io) -- disabled on forks that aren't esphome/esphome itself.
+    #
+    # Pull requests into beta and release are skipped as well. CodSpeed compares a
+    # pull request against the newest commit of its base branch that has a benchmark
+    # run of its own, and only dev is benchmarked. A release pull request therefore
+    # falls back to dev's latest run, so every speed-up merged into dev since the
+    # release branched is reported as a regression in the release. The changes there
+    # have already been benchmarked on their original dev pull requests.
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
@@ -929,7 +946,6 @@ jobs:
       ESPHOME_SDK_NRF_PREFIX: ~/.esphome-sdk-nrf
     strategy:
       fail-fast: false
-      max-parallel: ${{ (startsWith(github.base_ref, 'beta') || startsWith(github.base_ref, 'release')) && 32 || 16 }}
       matrix:
         batch: ${{ fromJson(needs.determine-jobs.outputs.component-test-batches) }}
     steps:
@@ -1016,7 +1032,7 @@ jobs:
           # - This catches pin conflicts and other issues in directly changed code
           # - Grouped tests use --testing-mode to allow config merging (disables some checks)
           # - Dependencies are safe to group since they weren't modified in this PR
-          if [[ "${{ github.base_ref }}" == beta* ]] || [[ "${{ github.base_ref }}" == release* ]]; then
+          if [[ "${{ needs.determine-jobs.outputs.release-pr }}" == "true" ]]; then
             directly_changed_csv=""
             echo "Testing components: $components_csv"
             echo "Target branch: ${{ github.base_ref }} - grouping all components"

.github/workflows/codeql.yml

@@ -56,7 +56,7 @@ jobs:
 
       # Initializes the CodeQL tools for scanning.
       - name: Initialize CodeQL
-        uses: github/codeql-action/init@ff2f1c621b7f889edc0d3c761ac2e6a3f8cdb0dd # v4.37.7
+        uses: github/codeql-action/init@db488ddef3bf6cb639b32c2e9a7c0a7ea8271d28 # v4.37.8
         with:
           languages: ${{ matrix.language }}
           build-mode: ${{ matrix.build-mode }}
@@ -84,6 +84,6 @@ jobs:
           exit 1
 
       - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@ff2f1c621b7f889edc0d3c761ac2e6a3f8cdb0dd # v4.37.7
+        uses: github/codeql-action/analyze@db488ddef3bf6cb639b32c2e9a7c0a7ea8271d28 # v4.37.8
         with:
           category: "/language:${{matrix.language}}"

CODEOWNERS

@@ -476,6 +476,7 @@ esphome/components/sensirion_common/* @martgras
 esphome/components/sensor/* @esphome/core
 esphome/components/serial_proxy/* @kbx81
 esphome/components/sfa30/* @ghsensdev
+esphome/components/sfa40/* @NoQuarrel
 esphome/components/sgp40/* @SenexCrenshaw
 esphome/components/sgp4x/* @martgras @SenexCrenshaw
 esphome/components/sha256/* @esphome/core

docker/Dockerfile

@@ -22,7 +22,7 @@ RUN \
     -r /requirements.txt
 
 # Install the ESPHome Device Builder dashboard.
-RUN uv pip install --no-cache-dir esphome-device-builder==1.12.4
+RUN uv pip install --no-cache-dir esphome-device-builder==1.13.1
 
 RUN \
     platformio settings set enable_telemetry No \

esphome/__main__.py

@@ -857,7 +857,20 @@ def compile_program(args: ArgsProtocol, config: ConfigType) -> int:
         toolchain.create_factory_bin()
         toolchain.create_ota_bin()
         toolchain.create_elf_copy()
-        toolchain.get_idedata()
+        from esphome.build_helpers.idedata import IDEDATA_BEST_EFFORT_ERRORS
+
+        try:
+            if toolchain.get_idedata() is None:
+                _LOGGER.warning("No idedata was generated for this build")
+        except IDEDATA_BEST_EFFORT_ERRORS as err:
+            # The firmware already built; an idedata failure must not fail
+            # a successful build.
+            _LOGGER.warning(
+                "Could not generate idedata: %s (IDE, clang-tidy, and "
+                "memory-analysis data will be unavailable for this build)",
+                err,
+            )
+            _LOGGER.debug("Idedata failure detail", exc_info=True)
     else:
         from esphome.platformio import toolchain
 
@@ -2721,10 +2734,14 @@ def run_esphome(argv):
     # Skipped when -s overrides are passed, since the cache was written
     # against the previous substitution set.
     config: ConfigType | None = None
-    cache_eligible = (
+    cache_write_eligible = (
         args.command in ("upload", "logs") and not command_line_substitutions
     )
-    if cache_eligible:
+    # An explicit --toolchain must re-run the per-platform validators, so
+    # gate only the cache read; the refresh below saves the result unless
+    # the sidecar records a different toolchain.
+    cache_read_eligible = cache_write_eligible and args.toolchain is None
+    if cache_read_eligible:
         from esphome.compiled_config import load_compiled_config
 
         config = load_compiled_config(conf_path)
@@ -2748,17 +2765,14 @@ def run_esphome(argv):
             return 2
     CORE.config = config
 
-    # Fallback for platforms whose validators didn't set the toolchain
-    # (only the esp32 component reads esp32.framework.toolchain). All
-    # other platforms only support PlatformIO today. Must run before the
-    # cache refresh below so its sidecar records the same toolchain a
-    # compile would.
+    # The cache fast path skips validation, and legacy sidecars lack the
+    # toolchain field. Must run before the cache refresh below.
     if CORE.toolchain is None:
         CORE.toolchain = Toolchain.PLATFORMIO
 
     # Refresh the cache so the next upload/logs hits the fast path
     # instead of re-running read_config.
-    if cache_eligible and cache_missed:
+    if cache_write_eligible and cache_missed:
         from esphome.compiled_config import save_compiled_config_and_sidecar
 
         save_compiled_config_and_sidecar(config)

esphome/arduino8266/__init__.py

@@ -0,0 +1,9 @@
+"""Native (PlatformIO-free) build support for the ESP8266 Arduino core.
+
+This package downloads the Arduino ESP8266 core and the xtensa-lx106
+toolchain, generates a ninja build for them plus the ESPHome sources, and
+drives the build directly — the ESP8266 equivalent of ``esphome.espidf``.
+
+Deliberately importable without the esp8266 component to avoid circular
+imports; the component wires these modules in via lazy imports.
+"""

esphome/arduino8266/framework.py

@@ -0,0 +1,164 @@
+"""Download and install the Arduino ESP8266 core, toolchain, and ninja.
+
+Artifacts land in a machine-global cache (shared across projects, like the
+ESP-IDF install in ``esphome.espidf.framework``):
+
+    <cache>/arduino8266/frameworks/<version>/   framework-arduinoespressif8266
+    <cache>/arduino8266/toolchains/<version>/   toolchain-xtensa (gcc 10.3)
+
+Packages come from the PlatformIO registry (identical bits to the PlatformIO
+backend); ``ESPHOME_ARDUINO8266_*_MIRRORS`` overrides the URLs. ninja comes
+from PATH or the ninja PyPI wheel.
+"""
+
+from __future__ import annotations
+
+import os
+from pathlib import Path
+from typing import NamedTuple
+
+from esphome.build_helpers.ccache import ccache_defaults_env
+from esphome.build_helpers.ninja import find_ninja
+from esphome.build_helpers.tools_cache import ARDUINO8266_TOOLS_CACHE, tools_cache_path
+from esphome.core import EsphomeError, Version
+from esphome.framework_helpers import str_to_lst_of_str
+from esphome.platformio.registry import install_package, prefetch_packages
+
+FRAMEWORK_PACKAGE = "framework-arduinoespressif8266"
+TOOLCHAIN_PACKAGE = "toolchain-xtensa"
+# gcc 10.3, the toolchain Arduino core 3.x builds with; the build
+# generator's compile flags are tuned to it.
+TOOLCHAIN_VERSION = "2.100300.220621"
+
+ESPHOME_ARDUINO8266_FRAMEWORK_MIRRORS = str_to_lst_of_str(
+    os.environ.get("ESPHOME_ARDUINO8266_FRAMEWORK_MIRRORS", "")
+)
+ESPHOME_ARDUINO8266_TOOLCHAIN_MIRRORS = str_to_lst_of_str(
+    os.environ.get("ESPHOME_ARDUINO8266_TOOLCHAIN_MIRRORS", "")
+)
+
+
+def get_arduino8266_tools_path() -> Path:
+    # Machine-global so all projects share one install; see
+    # espidf.framework.get_idf_tools_path for the location rationale.
+    return tools_cache_path(*ARDUINO8266_TOOLS_CACHE)
+
+
+# 3.1.1 rather than 3.1.0: the registry has no package for 3.1.0, and the
+# encoder below cannot name 3.0.0/3.0.1 either (see its docstring)
+MIN_FRAMEWORK_VERSION = Version(3, 1, 1)
+
+
+def framework_package_version(ver: Version) -> str:
+    """Map an Arduino core version to its registry package version (3.1.2 ->
+    3.30102.0; the leading 3 is the package major).
+
+    Exact registry names only for cores > 2.6.2 and >= 3.0.2; callers floor
+    at MIN_FRAMEWORK_VERSION.
+    """
+    if ver.major > 3:
+        raise EsphomeError(
+            f"Arduino core {ver} is not supported yet; "
+            "the newest known core series is 3.x"
+        )
+    if ver <= Version(2, 6, 2):
+        # Cores <= 2.6.2 use the older 1.x/2.x package-major encodings (same
+        # boundary as _format_framework_arduino_version's era guard)
+        raise EsphomeError(
+            f"Arduino core {ver} uses an older package encoding than this "
+            "helper implements (newer than 2.6.2)"
+        )
+    return f"3.{ver.major}{ver.minor:02d}{ver.patch:02d}.0"
+
+
+def get_framework_path(package_version: str) -> Path:
+    return get_arduino8266_tools_path() / "frameworks" / package_version
+
+
+def get_toolchain_path() -> Path:
+    return get_arduino8266_tools_path() / "toolchains" / TOOLCHAIN_VERSION
+
+
+class InstalledPaths(NamedTuple):
+    """Locations of the installed framework, toolchain, and ninja binary."""
+
+    framework: Path
+    toolchain: Path
+    ninja: Path
+
+
+def check_and_install(framework_version: Version) -> InstalledPaths:
+    """Ensure framework, toolchain, and ninja are installed; return their paths."""
+    if framework_version < MIN_FRAMEWORK_VERSION:
+        # Config validation enforces this too; keep the module honest when
+        # called directly.
+        raise EsphomeError(
+            f"The native toolchain requires the Arduino core "
+            f">= {MIN_FRAMEWORK_VERSION}, got {framework_version}"
+        )
+    # Probe the cheap local dependency before ~110 MB of downloads
+    ninja_path = find_ninja()
+    package_version = framework_package_version(framework_version)
+    framework_path = get_framework_path(package_version)
+    downloads_dir = get_arduino8266_tools_path() / "downloads"
+    toolchain_path = get_toolchain_path()
+    # One spec per package: the prefetch and the installs must agree
+    specs = (
+        (
+            FRAMEWORK_PACKAGE,
+            package_version,
+            framework_path,
+            ESPHOME_ARDUINO8266_FRAMEWORK_MIRRORS,
+            ("cores/esp8266", "tools/sdk", "libraries"),
+        ),
+        (
+            TOOLCHAIN_PACKAGE,
+            TOOLCHAIN_VERSION,
+            toolchain_path,
+            ESPHOME_ARDUINO8266_TOOLCHAIN_MIRRORS,
+            # xtensa-lx106-elf pins the target: every gcc package has a bin/
+            ("bin", "xtensa-lx106-elf"),
+        ),
+    )
+    # Fetch both archives at once; the installs below verify and extract
+    prefetch_packages([spec[:4] for spec in specs], downloads_dir)
+    for name, version, dest, mirrors, expect in specs:
+        install_package(name, version, dest, mirrors, downloads_dir, expect=expect)
+    return InstalledPaths(
+        framework=framework_path, toolchain=toolchain_path, ninja=ninja_path
+    )
+
+
+def toolchain_tool(toolchain_path: Path, name: str) -> Path:
+    """Path to one toolchain tool (gcc, g++, ar, size, addr2line, ...).
+
+    The single owner of the ``bin/xtensa-lx106-elf-<name>`` layout and the
+    Windows suffix, so a toolchain package bump touches one spot.
+    """
+    suffix = ".exe" if os.name == "nt" else ""
+    return toolchain_path / "bin" / f"xtensa-lx106-elf-{name}{suffix}"
+
+
+def get_build_env(toolchain_path: Path, ccache: str | None) -> dict[str, str]:
+    env = os.environ.copy()
+    # Drop empty entries: a trailing separator from an absent PATH would
+    # make the shell search the current directory for tools
+    parts = [
+        str(toolchain_path / "bin"),
+        *filter(None, env.get("PATH", "").split(os.pathsep)),
+    ]
+    env["PATH"] = os.pathsep.join(parts)
+    env.update(ccache_env(ccache))
+    return env
+
+
+def ccache_env(ccache: str | None) -> dict[str, str]:
+    """Return ccache settings for the build subprocess (not os.environ).
+
+    ``ccache`` is the pre-resolved binary (resolve_ccache_path), or None
+    when disabled. Values the user already set in the environment are
+    respected.
+    """
+    if ccache is None:
+        return {}
+    return ccache_defaults_env(get_arduino8266_tools_path() / "ccache")

esphome/build_gen/espidf.py

@@ -1,6 +1,7 @@
 """ESP-IDF direct build generator for ESPHome."""
 
 import json
+import logging
 from pathlib import Path
 
 from esphome.components.esp32 import (
@@ -11,6 +12,7 @@ from esphome.components.esp32 import (
 )
 import esphome.config_validation as cv
 from esphome.core import CORE
+from esphome.espidf import variant_to_idf_target
 from esphome.framework_helpers import (
     get_project_compile_flags,
     get_project_cxx_compile_flags,
@@ -18,6 +20,8 @@ from esphome.framework_helpers import (
 )
 from esphome.helpers import mkdir_p, write_file_if_changed
 
+_LOGGER = logging.getLogger(__name__)
+
 # Replaces the IDF default C++ standard (-std=gnu++2b appended to
 # CXX_COMPILE_OPTIONS by project.cmake's __build_init) with the one set via
 # cg.set_cpp_standard(). Emitted between include(project.cmake) and project(),
@@ -31,11 +35,12 @@ idf_build_set_property(CXX_COMPILE_OPTIONS "${{esphome_cxx_compile_options}}")""
 
 
 def get_available_components() -> list[str] | None:
-    """Get list of built-in ESP-IDF components from project_description.json.
+    """List the built-in ESP-IDF components from ``project_description.json``.
 
-    Excludes ``src``, IDF-managed components (``managed_components/``), and
-    converted PIO libs (``pio_components/``). Returns ``None`` if the build
-    dir or ``project_description.json`` isn't ready yet.
+    Only components below its ``idf_path/components`` count, which leaves out
+    ``src``, IDF-managed components, converted PIO libs and project local
+    ones such as the Arduino ``component_stubs``. Returns ``None`` if the
+    build dir or ``project_description.json`` isn't ready yet.
     """
     if CORE.build_path is None:
         return None
@@ -46,30 +51,24 @@ def get_available_components() -> list[str] | None:
     try:
         with project_desc.open(encoding="utf-8") as f:
             data = json.load(f)
-
-        component_info = data.get("build_component_info", {})
-
-        result = []
-        for name, info in component_info.items():
-            # Exclude our own src component
-            if name == "src":
-                continue
-
-            # Exclude IDF-managed and converted-PIO components (external).
-            comp_dir = info.get("dir", "")
-            if "managed_components" in comp_dir or "pio_components" in comp_dir:
-                continue
-
-            result.append(name)
-
-        return result
-    except (json.JSONDecodeError, OSError):
+        root = (Path(data["idf_path"]) / "components").resolve()
+        result = [
+            name
+            for name, info in data.get("build_component_info", {}).items()
+            if (comp_dir := info.get("dir"))
+            and Path(comp_dir).resolve().is_relative_to(root)
+        ]
+    except (json.JSONDecodeError, KeyError, OSError) as err:
+        _LOGGER.debug("Could not read %s: %s", project_desc, err)
         return None
+    if not result:
+        _LOGGER.warning("No ESP-IDF components found under %s", root)
+    return result
 
 
 def has_discovered_components() -> bool:
-    """Check if we have discovered components from a previous configure."""
-    return get_available_components() is not None
+    """Check if a previous configure discovered any built-in components."""
+    return bool(get_available_components())
 
 
 def _cmake_quote(value: str) -> str:
@@ -79,15 +78,17 @@ def _cmake_quote(value: str) -> str:
     return f'"{escaped}"'
 
 
-def get_project_cmakelists(minimal: bool = False) -> str:
+def get_project_cmakelists(
+    minimal: bool = False, builtin_components: list[str] | None = None
+) -> str:
     """Generate the top-level CMakeLists.txt for ESP-IDF project.
 
     When ``minimal`` is true, omit ``ESPHOME_PROJECT_BUILTIN_COMPONENTS``
     since ``project_description.json`` may be stale on the first write.
+    ``builtin_components`` supplies the discovered list (from the cache)
+    instead of reading it from ``project_description.json``.
     """
-    # Get IDF target from ESP32 variant (e.g., ESP32S3 -> esp32s3)
-    variant = get_esp32_variant()
-    idf_target = variant.lower().replace("-", "")
+    idf_target = variant_to_idf_target(get_esp32_variant())
 
     # esp_idf_size 2.x (bundled with IDF >=6.0) made NG the default and
     # removed the --ng flag; on 1.x (IDF 5.5) --ng is required to get
@@ -162,9 +163,11 @@ def get_project_cmakelists(minimal: bool = False) -> str:
         else "\n".join(
             f"idf_build_set_property(ESPHOME_PROJECT_BUILTIN_COMPONENTS {name} APPEND)"
             for name in sorted(
-                set(get_available_components() or []).difference(
-                    CORE.cmake_args.get("EXCLUDE_COMPONENTS", "").split(";")
-                )
+                set(
+                    builtin_components
+                    if builtin_components is not None
+                    else get_available_components() or []
+                ).difference(CORE.cmake_args.get("EXCLUDE_COMPONENTS", "").split(";"))
             )
         )
     )
@@ -279,7 +282,9 @@ target_link_options(${{COMPONENT_LIB}} PUBLIC
 """
 
 
-def write_project(minimal: bool = False) -> None:
+def write_project(
+    minimal: bool = False, builtin_components: list[str] | None = None
+) -> None:
     """Write ESP-IDF project files."""
     mkdir_p(CORE.build_path)
     mkdir_p(CORE.relative_src_path())
@@ -287,7 +292,7 @@ def write_project(minimal: bool = False) -> None:
     # Write top-level CMakeLists.txt
     write_file_if_changed(
         CORE.relative_build_path("CMakeLists.txt"),
-        get_project_cmakelists(minimal=minimal),
+        get_project_cmakelists(minimal=minimal, builtin_components=builtin_components),
     )
 
     # Write component CMakeLists.txt in src/

esphome/build_helpers/__init__.py

@@ -0,0 +1 @@
+"""Build helpers shared by the native (non-PlatformIO) toolchains."""

esphome/build_helpers/ccache.py

@@ -0,0 +1,92 @@
+"""Shared ccache policy for build backends: env-knob parsing, binary
+resolution, and default ``CCACHE_*`` values."""
+
+from __future__ import annotations
+
+import logging
+import os
+from pathlib import Path
+
+from esphome.framework_helpers import strip_win_long_path_prefix, tool_version_runs
+from esphome.helpers import FALSY_ENV_STRINGS, TRUTHY_ENV_STRINGS
+
+_LOGGER = logging.getLogger(__name__)
+
+
+def _ccache_runs(ccache: str) -> bool:
+    """Return True when the ``ccache`` found on PATH actually runs."""
+    return tool_version_runs(
+        ccache,
+        "Ignoring ccache at %s because it failed to run; compiling without ccache",
+    )
+
+
+def parse_enable_env(name: str) -> bool | None:
+    """Strictly parse an on/off environment knob; None when unset or invalid.
+
+    ``bool(str)`` truthiness would flip ``no``/``off`` to enabled, so only
+    1/true/yes/on and 0/false/no/off count; anything else warns and reads
+    as unset so the caller's default policy applies.
+    """
+    raw = os.environ.get(name)
+    if raw is None:
+        return None
+    lowered = raw.strip().lower()
+    if not lowered:
+        # ENV KNOB= (Docker/CI) has always read as a disable
+        return False
+    if lowered in TRUTHY_ENV_STRINGS:
+        return True
+    if lowered in FALSY_ENV_STRINGS:
+        return False
+    _LOGGER.warning("Ignoring unrecognized %s=%r; use 1 or 0", name, raw)
+    return None
+
+
+def resolve_ccache_path() -> str | None:
+    """The ccache binary to wrap compiles with, or None when disabled.
+
+    An explicit ``ESPHOME_CCACHE_ENABLE=1`` skips the runnability probe; the
+    Windows extended-length prefix is stripped before probing (#18399).
+    """
+    import shutil
+
+    explicit = parse_enable_env("ESPHOME_CCACHE_ENABLE")
+    if explicit is False:
+        return None
+    ccache = shutil.which("ccache")
+    if ccache is None:
+        if explicit:
+            _LOGGER.warning(
+                "ESPHOME_CCACHE_ENABLE is set but no ccache binary is on PATH; "
+                "compiling without ccache"
+            )
+        return None
+    ccache = strip_win_long_path_prefix(ccache)
+    if not explicit and not _ccache_runs(ccache):
+        return None
+    return ccache
+
+
+def ccache_defaults_env(cache_dir: Path) -> dict[str, str]:
+    """Default ``CCACHE_*`` values for a build subprocess (not os.environ).
+
+    Values the user already set in the environment are respected. Depend
+    mode is on: both native backends emit depfiles (-MMD / CMake), which
+    keeps cache-miss overhead low.
+    """
+    from esphome.core import CORE
+
+    # An unset build_path means the env was built before preload; fail loudly
+    # rather than silently drop CCACHE_BASEDIR.
+    if CORE.build_path is None:
+        raise ValueError(
+            "CORE.build_path must be set before constructing the build environment"
+        )
+    defaults = {
+        "CCACHE_DIR": str(cache_dir),
+        "CCACHE_NOHASHDIR": "true",
+        "CCACHE_DEPEND": "1",
+        "CCACHE_BASEDIR": str(Path(CORE.build_path).resolve()),
+    }
+    return {k: v for k, v in defaults.items() if k not in os.environ}

esphome/build_helpers/idedata.py

@@ -1,10 +1,10 @@
-"""Derive idedata from an ESP-IDF native-toolchain ``compile_commands.json``.
+"""Derive idedata from a native (non-PlatformIO) build's ``compile_commands.json``.
 
-PlatformIO exposes a curated ``pio run -t idedata`` JSON; the native ESP-IDF
-toolchain has no such command, but its CMake build emits
-``build/compile_commands.json`` (CMAKE_EXPORT_COMPILE_COMMANDS). This module
-turns that file into the same fields consumers (IDE integration, clang-tidy)
-expect:
+PlatformIO exposes a curated ``pio run -t idedata`` JSON; the native
+toolchains have no such command, but each build produces a
+``compile_commands.json`` (CMAKE_EXPORT_COMPILE_COMMANDS for ESP-IDF, ninja's
+compdb tool otherwise). This module turns that file into the same fields
+consumers (IDE integration, clang-tidy) expect:
 
     {cc_path, cxx_path, cxx_flags, defines, includes: {build, toolchain}}
 """
@@ -18,6 +18,19 @@ from pathlib import Path
 import shlex
 import subprocess
 
+from esphome.core import EsphomeError
+from esphome.helpers import write_file
+
+# Everything idedata generation may raise after a successful link; idedata
+# is a bonus artifact, so consumers warn instead of failing the build
+IDEDATA_BEST_EFFORT_ERRORS = (
+    EsphomeError,
+    LookupError,
+    OSError,
+    RuntimeError,
+    ValueError,
+)
+
 _LOGGER = logging.getLogger(__name__)
 
 # C++ translation-unit suffixes used to identify ESPHome source files.
@@ -30,12 +43,8 @@ _ESPHOME_SRC_MARKER = "/src/esphome/"
 
 
 def _is_esphome_src(file: str) -> bool:
-    """Whether ``file`` is an ESPHome C++ translation unit.
-
-    ``compile_commands.json`` ``file`` paths use the OS-native separator, so on
-    Windows they contain backslashes; normalize to ``/`` before testing the
-    marker, otherwise no source matches and the build-include union is empty.
-    """
+    """Whether ``file`` is an ESPHome C++ translation unit; normalized to
+    ``/`` first since Windows compile DBs use backslashes."""
     return _ESPHOME_SRC_MARKER in file.replace("\\", "/") and file.endswith(
         _CXX_SUFFIXES
     )
@@ -106,11 +115,8 @@ def _expand_response_files(tokens: list[str], directory: Path) -> list[str]:
 
 
 def _pick_entry(entries: list[dict]) -> dict:
-    """Pick a representative ESPHome C++ translation unit.
-
-    All ESPHome sources share the same component flags/defines, so any one of
-    them yields the cxx_path / cxx_flags / defines we need.
-    """
+    """Pick a representative ESPHome C++ TU; all share the same component
+    flags/defines."""
     for entry in entries:
         if _is_esphome_src(entry["file"]):
             return entry
@@ -120,25 +126,46 @@ def _pick_entry(entries: list[dict]) -> dict:
     raise ValueError("no C++ translation unit found in compile_commands.json")
 
 
-def _parse_entry(entry: dict) -> tuple[str, list[str], list[str], list[str]]:
+# Compiler launchers that may prefix a compile command; a closed launcher
+# denylist beats enumerating compiler names, an open set.
+_LAUNCHER_STEMS = frozenset({"ccache", "sccache", "distcc", "icecc", "buildcache"})
+
+
+def _is_launcher(token: str) -> bool:
+    return Path(token).stem.lower() in _LAUNCHER_STEMS
+
+
+def parse_entry(
+    entry: dict, launcher: str | None = None
+) -> tuple[str, list[str], list[str], list[str]]:
     """Parse one compile_commands entry -> (cxx_path, defines, includes, cxx_flags)."""
     directory = Path(entry["directory"])
     tokens = _expand_response_files(_split_command(entry["command"]), directory)
 
     def _include(raw: str) -> str:
-        # Include paths in compile_commands are interpreted relative to the
-        # entry's ``directory`` (e.g. build-local ``-Iconfig``); resolve them
-        # so the cached idedata is usable regardless of the consumer's cwd.
-        # Emit forward slashes (``normpath`` yields ``\`` on Windows) so the
-        # paths match the absolute, already-forward-slash entries in the JSON.
+        # Resolve against the entry's ``directory`` so cached idedata works
+        # from any cwd; emit forward slashes to match the JSON's own entries
         raw = raw.strip()
         if raw and not Path(raw).is_absolute():
             raw = os.path.normpath(directory / raw)
         return raw.replace("\\", "/")
 
+    # A launcher-wrapped command ("ccache g++ ...") names the compiler second
+    if launcher is not None and tokens[:1] == [launcher]:
+        tokens = tokens[1:]
+    if not tokens:
+        # An empty command, or one that was only the launcher; fail by name
+        raise ValueError(f"empty compile command for {entry.get('file')}")
+    if _is_launcher(tokens[0]) and len(tokens) > 1 and not tokens[1].startswith("-"):
+        # Stale DB built with a launcher this run no longer configures; the
+        # real compiler is the next token
+        _LOGGER.warning("Stripping unconfigured launcher %s", tokens[0])
+        tokens = tokens[1:]
     # token0 is the compiler path; the rest of the command already uses forward
     # slashes on Windows, so normalize it too for a consistent idedata file.
     cxx_path = tokens[0].replace("\\", "/")
+    # Enforced here so no caller can record ccache as the compiler
+    reject_launcher_compiler(cxx_path)
     defines: list[str] = []
     includes: list[str] = []
     cxx_flags: list[str] = []
@@ -168,7 +195,7 @@ def _parse_entry(entry: dict) -> tuple[str, list[str], list[str], list[str]]:
     return cxx_path, defines, includes, cxx_flags
 
 
-def _get_toolchain_includes(cxx_path: str) -> list[str]:
+def get_toolchain_includes(cxx_path: str) -> list[str]:
     """Query the compiler for its builtin ``#include <...>`` search dirs."""
     result = subprocess.run(
         [cxx_path, "-E", "-x", "c++", "-", "-v"],
@@ -219,26 +246,128 @@ def _cc_path_from_cxx(cxx_path: str) -> str:
     return f"{stem}{suffix}"
 
 
-def idedata_from_build(compile_commands: Path) -> dict:
+def _cache_usable(cached: object) -> bool:
+    """Check a cached idedata dict against the guarantees of the write path.
+
+    Caches written by older versions predate the launcher rejection and the
+    include-union shape; serving one would bypass both. The dict check also
+    keeps "in" from substring-matching a bare JSON string.
+    """
+    if not isinstance(cached, dict) or "cc_path" not in cached:
+        return False
+    cxx_path = cached.get("cxx_path")
+    if not isinstance(cxx_path, str) or _is_launcher(cxx_path):
+        return False
+    includes = cached.get("includes")
+    return isinstance(includes, dict) and isinstance(includes.get("build"), list)
+
+
+def load_or_build_idedata(
+    compile_commands: Path,
+    elf_path: Path,
+    cache: Path,
+    launcher: str | None = None,
+) -> dict | None:
+    """Return idedata for a compile_commands.json build, cached on mtime.
+
+    Shared by the native ESP-IDF and ESP8266 Arduino toolchains. Returns None
+    when the compile DB doesn't exist yet (nothing was built). ``launcher``
+    is the compiler-launcher path (ccache) the build was generated with, if
+    any; commands in the compile DB are prefixed with it.
+    """
+    if not compile_commands.is_file():
+        _LOGGER.debug("No %s yet; skipping idedata generation", compile_commands)
+        return None
+
+    if cache.is_file() and cache.stat().st_mtime >= compile_commands.stat().st_mtime:
+        try:
+            cached = json.loads(cache.read_text(encoding="utf-8"))
+        except (ValueError, OSError) as err:
+            # A recurring cause (interrupted write, disk full) would otherwise
+            # look like unexplained slow builds
+            _LOGGER.warning("Discarding unreadable idedata cache %s: %s", cache, err)
+        else:
+            if _cache_usable(cached):
+                # Re-stamp so a relocated build dir cannot serve a stale ELF path
+                cached["prog_path"] = str(elf_path)
+                return cached
+            _LOGGER.debug("Regenerating idedata: cache %s fails validation", cache)
+
+    data = idedata_from_build(compile_commands, launcher)
+    data["prog_path"] = str(elf_path)
+    cache.parent.mkdir(parents=True, exist_ok=True)
+    # Atomic so a crash mid-write cannot leave a truncated cache
+    write_file(cache, json.dumps(data, indent=2) + "\n")
+    return data
+
+
+def reject_launcher_compiler(cxx_path: str) -> None:
+    """Reject a compile DB naming a launcher (ccache) as the compiler; it
+    must never be probed, cached, or consumed."""
+    if _is_launcher(cxx_path):
+        raise EsphomeError(
+            f"compile_commands.json names the launcher {cxx_path} as the "
+            "compiler; the compile database is unusable"
+        )
+
+
+def idedata_from_build(compile_commands: Path, launcher: str | None = None) -> dict:
     """Parse compile_commands.json into the idedata fields consumers expect.
 
-    A single ESP-IDF compile entry only carries its own component's REQUIRES
-    include set, but consumers (clang-tidy) analyze ESPHome headers that
-    transitively pull in other components. So take cxx_path / cxx_flags /
-    defines from a representative ESPHome TU, but union the include dirs across
-    all ESPHome TUs to get a project-wide superset (as PlatformIO's idedata
-    provides).
+    A single compile entry only carries the include set its own translation
+    unit was built with (per-component under ESP-IDF), but consumers
+    (clang-tidy) analyze ESPHome headers that transitively pull in other
+    components. So take cxx_path / cxx_flags / defines from a representative
+    ESPHome TU, but union the include dirs across all ESPHome TUs to get a
+    project-wide superset (as PlatformIO's idedata provides).
     """
     entries = json.loads(Path(compile_commands).read_text(encoding="utf-8"))
-    cxx_path, defines, _, cxx_flags = _parse_entry(_pick_entry(entries))
+    if not isinstance(entries, list) or not all(isinstance(e, dict) for e in entries):
+        # A TypeError here would escape IDEDATA_BEST_EFFORT_ERRORS
+        raise EsphomeError(f"{compile_commands} is not a compile-command list")
 
-    build_includes: dict[str, None] = {}
+    representative = _pick_entry(entries)
+    cxx_path, defines, rep_includes, cxx_flags = parse_entry(representative, launcher)
+
+    # Seed with the representative's includes so it is not parsed twice
+    has_esphome_tu = _is_esphome_src(representative["file"])
+    build_includes: dict[str, None] = dict.fromkeys(
+        rep_includes if has_esphome_tu else ()
+    )
+
+    def _shape(entry: dict) -> str:
+        # directory + command minus TU-specific paths: same shape means the
+        # same include set, so tokenize once per shape. Response-file
+        # commands never dedupe (the .rsp contents differ per object)
+        command = entry["command"]
+        directory = entry.get("directory", "")
+        if "@" in command:
+            return f"unique:{directory}|{entry.get('output') or command}"
+        stripped = command.replace(entry.get("file", ""), "").replace(
+            entry.get("output", ""), ""
+        )
+        return f"{directory}|{stripped}"
+
+    seen_shapes = {_shape(representative)}
     for entry in entries:
-        if not _is_esphome_src(entry["file"]):
+        if entry is representative or not _is_esphome_src(entry["file"]):
             continue
-        for inc in _parse_entry(entry)[2]:
+        has_esphome_tu = True
+        if (shape := _shape(entry)) in seen_shapes:
+            _LOGGER.debug("Include union: %s shares a command shape", entry["file"])
+            continue
+        seen_shapes.add(shape)
+        for inc in parse_entry(entry, launcher)[2]:
             build_includes.setdefault(inc, None)
 
+    if not has_esphome_tu:
+        # An arbitrary fallback TU breaks clang-tidy/IDE consumers, and a
+        # warning would be cached into permanence; call sites downgrade this
+        raise EsphomeError(
+            f"No ESPHome translation unit found in {compile_commands}; "
+            "refusing to cache unusable idedata"
+        )
+
     return {
         "cc_path": _cc_path_from_cxx(cxx_path),
         "cxx_path": cxx_path,
@@ -246,6 +375,6 @@ def idedata_from_build(compile_commands: Path) -> dict:
         "defines": defines,
         "includes": {
             "build": list(build_includes),
-            "toolchain": _get_toolchain_includes(cxx_path),
+            "toolchain": get_toolchain_includes(cxx_path),
         },
     }

esphome/build_helpers/ninja.py

@@ -0,0 +1,92 @@
+"""Platform-neutral helpers for ninja-driven native builds."""
+
+from __future__ import annotations
+
+import logging
+import os
+from pathlib import Path
+import re
+import shutil
+
+from esphome.core import EsphomeError
+from esphome.framework_helpers import strip_win_long_path_prefix, tool_version_runs
+
+_LOGGER = logging.getLogger(__name__)
+
+
+def _ninja_runs(binary: str) -> bool:
+    """Whether the ninja found on PATH actually runs (see tool_version_runs)."""
+    return tool_version_runs(
+        binary,
+        "Ignoring ninja at %s because it failed to run; "
+        "falling back to the bundled wheel",
+    )
+
+
+def find_ninja() -> Path:
+    """Locate the ninja binary: a runnable PATH hit first, else the ninja
+    PyPI wheel."""
+    if binary := shutil.which("ninja"):
+        binary = strip_win_long_path_prefix(binary)
+        if _ninja_runs(binary):
+            return Path(binary)
+    import_error: ImportError | None = None
+    try:
+        import ninja
+    except ImportError as err:
+        import_error = err
+        wheel_binary = None
+    else:
+        wheel_binary = Path(ninja.BIN_DIR) / (
+            "ninja.exe" if os.name == "nt" else "ninja"
+        )
+    if wheel_binary is None or not wheel_binary.is_file():
+        raise EsphomeError(
+            "ninja not found on PATH or in the ninja package; reinstall the "
+            "esphome Python environment"
+        ) from import_error
+    return wheel_binary
+
+
+def escape(value: Path | str) -> str:
+    """Escape a path or token for a ninja file."""
+    return str(value).replace("$", "$$").replace(":", "$:").replace(" ", "$ ")
+
+
+def quote_arg(tok: str) -> str:
+    """Quote with the CreateProcess argv rule (as ``subprocess.list2cmdline``):
+    backslash runs double only before a quote. Windows-only; ``$`` must
+    already be doubled for ninja.
+    """
+    quoted = re.sub(r'(\\*)"', lambda m: m.group(1) * 2 + '\\"', tok)
+    quoted = re.sub(r"(\\+)\Z", lambda m: m.group(1) * 2, quoted)
+    return f'"{quoted}"'
+
+
+# Force-quote any token containing a character outside the shlex.quote-style
+# safe set: ninja hands POSIX commands to /bin/sh -c, so bare (, ;, <, *, `
+# and friends would be re-parsed as shell syntax.
+_NEEDS_QUOTE = re.compile(r"[^\w@%+=:,./-]")
+
+
+def shell_token(tok: str, force: bool = False) -> str:
+    """Re-quote a lexed token for the platform shell; ``force`` always quotes.
+
+    Single quotes on POSIX (/bin/sh), the argv rule on Windows
+    (CreateProcess). ``$`` is doubled first because ninja expands it before
+    the command reaches the shell.
+    """
+    tok = tok.replace("$", "$$")  # ninja would expand a bare $ to nothing
+    if not (force or not tok or _NEEDS_QUOTE.search(tok)):
+        return tok
+    # An empty token must become '' / "" or it vanishes from the argv
+    if os.name == "nt":
+        return quote_arg(tok)
+    # shlex.quote's rule; inlined because the $-doubled token must not be
+    # re-examined for safe characters
+    return "'" + tok.replace("'", "'\"'\"'") + "'"
+
+
+def quote_path(value: Path | str) -> str:
+    """Force-quote a path for the ninja command line (shell/CreateProcess)."""
+    return shell_token(str(value), force=True)

esphome/build_helpers/size_summary.py

@@ -0,0 +1,24 @@
+"""The PlatformIO-format size bar shared by the native toolchains."""
+
+from __future__ import annotations
+
+
+def format_bar(used: int, total: int) -> str:
+    """Match PlatformIO's ``_format_availale_bytes`` (sic, pioupload.py) exactly."""
+    pct_raw = used / total if total else 0
+    blocks = 10
+    filled = min(int(round(blocks * pct_raw)), blocks)
+    progress = "=" * filled
+    return (
+        f"[{progress:<{blocks}}] {pct_raw: 6.1%} "
+        f"(used {used:d} bytes from {total:d} bytes)"
+    )
+
+
+def print_size_line(label: str, used: int, total: int) -> None:
+    """One PlatformIO-format summary line (``RAM``/``Flash``).
+
+    The label padding is part of the format: ``script/ci_memory_impact_extract.py``
+    matches these lines verbatim.
+    """
+    print(f"{label + ':':<7}{format_bar(used, total)}")

esphome/build_helpers/tools_cache.py

@@ -0,0 +1,36 @@
+"""Machine-global tools cache location shared by the native backends."""
+
+from __future__ import annotations
+
+from pathlib import Path
+
+
+def tools_cache_path(env_var: str, subdir: str) -> Path:
+    """A backend's machine-global tools directory, with an env override.
+
+    A blank/whitespace override is treated as unset: ``Path("")`` resolves
+    to the CWD, which ``clean-all`` would then delete.
+    """
+    import platformdirs
+
+    from esphome.helpers import get_str_env
+
+    if prefix := get_str_env(env_var, "").strip():
+        # resolve(): symlinked prefixes otherwise trip idf.py's
+        # venv-mismatch warning on every build
+        return Path(prefix).expanduser().resolve()
+    # appauthor=False keeps the Windows path short (no vendor segment);
+    # deep IDF trees run into MAX_PATH otherwise
+    return (
+        Path(platformdirs.user_cache_dir("esphome", appauthor=False)) / subdir
+    ).resolve()
+
+
+# (env override, cache subdir) per native backend. writer.clean_all wipes
+# every entry via tools_cache_path, so listing a cache here is the single
+# step that registers it for removal; the backends' own path getters use
+# the same named pairs so the two cannot drift.
+IDF_TOOLS_CACHE = ("ESPHOME_ESP_IDF_PREFIX", "idf")
+SDK_NRF_TOOLS_CACHE = ("ESPHOME_SDK_NRF_PREFIX", "sdk-nrf")
+ARDUINO8266_TOOLS_CACHE = ("ESPHOME_ARDUINO8266_PREFIX", "arduino8266")
+TOOLS_CACHE_SPECS = (IDF_TOOLS_CACHE, SDK_NRF_TOOLS_CACHE, ARDUINO8266_TOOLS_CACHE)

esphome/compiled_config.py

@@ -100,6 +100,21 @@ def _refresh_sidecar() -> bool:
             )
             return False
         if old is not None and old.can_apply_to_core():
+            if (
+                old.toolchain is not None
+                and CORE.toolchain is not None
+                and old.toolchain != CORE.toolchain.value
+            ):
+                # Platforms normalize toolchain-sensitive keys differently;
+                # never cache a config validated under a different toolchain
+                # than the compile's
+                _LOGGER.debug(
+                    "Not caching: config validated with toolchain %r but the "
+                    "last compile used %r",
+                    CORE.toolchain.value,
+                    old.toolchain,
+                )
+                return False
             # Compile-written; nothing to refresh.
             return True
         if CORE.build_path is not None and CORE.build_path.exists():

esphome/components/api/__init__.py

@@ -1,4 +1,5 @@
 import logging
+import re
 from typing import Any
 
 from esphome import automation
@@ -499,6 +500,40 @@ async def to_code(config: ConfigType) -> None:
 
 KEY_VALUE_SCHEMA = cv.Schema({cv.string: cv.templatable(cv.string_strict)})
 
+_ID_CALL_PROG = re.compile(r"\bid\s*\(")
+
+
+# Remove before 2027.3.0: untagged strings that look like lambda source keep
+# being compiled as lambdas during the deprecation window
+def _coerce_implicit_lambda(value: Any) -> Any:
+    if not isinstance(value, str):
+        return value
+    if cv.looks_like_returning_lambda(value):
+        _LOGGER.warning(
+            "[api] The 'variables' value '%s' looks like a lambda but is "
+            "missing the !lambda tag. It is compiled as a lambda for now but "
+            "will be sent as literal text from 2027.3.0. Add !lambda to keep "
+            "it evaluated; literal text belongs under 'data:'.",
+            value,
+        )
+        # cv.templatable runs returning_lambda on the coerced Lambda
+        return cv.lambda_(value)
+    if _ID_CALL_PROG.search(value):
+        # lambda source without a return: issue 5394's mistake class
+        _LOGGER.warning(
+            "[api] The 'variables' value '%s' is sent as literal text; wrap "
+            "it in !lambda 'return ...;' to evaluate it instead.",
+            value,
+        )
+    return value
+
+
+# Static strings or !lambda values. cv.templatable stays introspectable for
+# schema tooling; removing the shim leaves KEY_VALUE_SCHEMA.
+VARIABLES_SCHEMA = cv.Schema(
+    {cv.string: cv.All(_coerce_implicit_lambda, cv.templatable(cv.string_strict))}
+)
+
 
 def _validate_response_config(config: ConfigType) -> ConfigType:
     # Validate dependencies:
@@ -535,9 +570,7 @@ HOMEASSISTANT_ACTION_ACTION_SCHEMA = cv.All(
             ),
             cv.Optional(CONF_DATA, default={}): KEY_VALUE_SCHEMA,
             cv.Optional(CONF_DATA_TEMPLATE, default={}): KEY_VALUE_SCHEMA,
-            cv.Optional(CONF_VARIABLES, default={}): cv.Schema(
-                {cv.string: cv.returning_lambda}
-            ),
+            cv.Optional(CONF_VARIABLES, default={}): VARIABLES_SCHEMA,
             cv.Optional(CONF_RESPONSE_TEMPLATE): cv.templatable(cv.string),
             cv.Optional(CONF_CAPTURE_RESPONSE, default=False): cv.boolean,
             cv.Optional(CONF_ON_SUCCESS): automation.validate_automation(single=True),
@@ -598,6 +631,8 @@ async def homeassistant_service_to_code(
     cg.add(var.init_variables(len(config[CONF_VARIABLES])))
     for key, value in config[CONF_VARIABLES].items():
         templ = await cg.templatable(value, args, None)
+        if isinstance(templ, str):
+            templ = cg.FlashStringLiteral(templ)
         cg.add(var.add_variable(cg.FlashStringLiteral(key), templ))
 
     if on_error := config.get(CONF_ON_ERROR):
@@ -652,7 +687,7 @@ HOMEASSISTANT_EVENT_ACTION_SCHEMA = cv.Schema(
         cv.Required(CONF_EVENT): validate_homeassistant_event,
         cv.Optional(CONF_DATA, default={}): KEY_VALUE_SCHEMA,
         cv.Optional(CONF_DATA_TEMPLATE, default={}): KEY_VALUE_SCHEMA,
-        cv.Optional(CONF_VARIABLES, default={}): KEY_VALUE_SCHEMA,
+        cv.Optional(CONF_VARIABLES, default={}): VARIABLES_SCHEMA,
     }
 )
 
@@ -698,6 +733,8 @@ async def homeassistant_event_to_code(
     cg.add(var.init_variables(len(config[CONF_VARIABLES])))
     for key, value in config[CONF_VARIABLES].items():
         templ = await cg.templatable(value, args, None)
+        if isinstance(templ, str):
+            templ = cg.FlashStringLiteral(templ)
         cg.add(var.add_variable(cg.FlashStringLiteral(key), templ))
 
     return var

esphome/components/api/api.proto

@@ -232,6 +232,7 @@ enum SerialProxyPortType {
 message SerialProxyInfo {
   string name = 1;                    // Human-readable port name
   SerialProxyPortType port_type = 2;  // Port type (RS232, RS485)
+  uint32 configured_line_states = 3;  // Bitmask of SerialProxyLineStateFlags this instance can drive
 }
 
 // DeviceInfoResponse max_data_length values:
@@ -1653,7 +1654,8 @@ message ListEntitiesMediaPlayerResponse {
   bool disabled_by_default = 6;
   EntityCategory entity_category = 7;
 
-  bool supports_pause = 8;
+  // Deprecated in ESPHome 2026.9.0; use feature_flags instead.
+  bool supports_pause = 8 [deprecated = true];
 
   repeated MediaPlayerSupportedFormat supported_formats = 9;
 
@@ -2626,6 +2628,22 @@ message ZWaveProxyRequest {
   bytes data = 2;
 }
 
+enum ZWaveProxyStatus {
+  ZWAVE_PROXY_STATUS_OK = 0;             // Request completed successfully
+  ZWAVE_PROXY_STATUS_IN_USE = 1;         // Denied: another client is already subscribed
+  ZWAVE_PROXY_STATUS_NOT_SUPPORTED = 2;  // Request type not supported
+}
+
+// Acknowledges a ZWaveProxyRequest (subscribe/unsubscribe). Sent since API 1.16.
+message ZWaveProxyRequestResponse {
+  option (id) = 151;
+  option (source) = SOURCE_SERVER;
+  option (ifdef) = "USE_ZWAVE_PROXY";
+
+  ZWaveProxyRequestType type = 1;  // Which request type this responds to
+  ZWaveProxyStatus status = 2;     // Result status
+}
+
 // ==================== INFRARED ====================
 // Note: Feature and capability flag enums are defined in
 // esphome/components/infrared/infrared.h
@@ -2769,12 +2787,18 @@ message SerialProxyGetModemPinsResponse {
 
   uint32 instance = 1;          // Instance index (0-based)
   uint32 line_states = 2;       // Bitmask of SerialProxyLineStateFlags
+  SerialProxyStatus status = 3; // INVALID_ARGUMENT if the instance index is out of range (since API 1.16)
 }
 
 enum SerialProxyRequestType {
   SERIAL_PROXY_REQUEST_TYPE_SUBSCRIBE = 0;   // Subscribe to receive data from this serial proxy instance
   SERIAL_PROXY_REQUEST_TYPE_UNSUBSCRIBE = 1; // Unsubscribe from this serial proxy instance
   SERIAL_PROXY_REQUEST_TYPE_FLUSH = 2;       // Flush the serial port (block until all TX data is sent)
+  // Values below are only valid in SerialProxyRequestResponse.type, identifying which
+  // operation is being acknowledged. Sending them in SerialProxyRequest.type is an
+  // error the device answers with INVALID_ARGUMENT.
+  SERIAL_PROXY_REQUEST_TYPE_CONFIGURE = 3;      // Acknowledges a SerialProxyConfigureRequest
+  SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS = 4; // Acknowledges a SerialProxySetModemPinsRequest
 }
 
 enum SerialProxyStatus {
@@ -2783,6 +2807,8 @@ enum SerialProxyStatus {
   SERIAL_PROXY_STATUS_ERROR = 2;           // Driver or hardware error
   SERIAL_PROXY_STATUS_TIMEOUT = 3;         // Timed out before TX completed
   SERIAL_PROXY_STATUS_NOT_SUPPORTED = 4;   // Request type not supported by this instance
+  SERIAL_PROXY_STATUS_PORT_IN_USE = 5;     // Denied: another client holds the port
+  SERIAL_PROXY_STATUS_INVALID_ARGUMENT = 6; // Invalid instance index or parameter value
 }
 
 // Generic request message for simple serial proxy operations
@@ -2795,7 +2821,9 @@ message SerialProxyRequest {
   SerialProxyRequestType type = 2;      // Request type
 }
 
-// Response to a SerialProxyRequest (e.g. flush completion or failure)
+// Acknowledges a serial proxy operation; the type field identifies which
+// operation is being acknowledged. Flush has been acknowledged since the
+// message was introduced; all other acknowledgements are sent since API 1.16.
 message SerialProxyRequestResponse {
   option (id) = 147;
   option (source) = SOURCE_SERVER;

esphome/components/api/api_connection.cpp

@@ -1099,7 +1099,6 @@ uint16_t APIConnection::try_send_media_player_info(EntityBase *entity, APIConnec
   auto *media_player = static_cast<media_player::MediaPlayer *>(entity);
   ListEntitiesMediaPlayerResponse msg;
   auto traits = media_player->get_traits();
-  msg.supports_pause = traits.get_supports_pause();
   msg.feature_flags = traits.get_feature_flags();
   for (auto &supported_format : traits.get_supported_formats()) {
     msg.supported_formats.emplace_back();
@@ -1381,7 +1380,12 @@ void APIConnection::on_z_wave_proxy_frame(const ZWaveProxyFrame &msg) {
 }
 
 void APIConnection::on_z_wave_proxy_request(const ZWaveProxyRequest &msg) {
-  zwave_proxy::global_zwave_proxy->zwave_proxy_request(this, msg.type);
+  ZWaveProxyRequestResponse resp{};
+  resp.type = msg.type;
+  resp.status = zwave_proxy::global_zwave_proxy->zwave_proxy_request(this, msg.type);
+  if (!this->send_message(resp)) {
+    API_LOG_MSG_DROPPED(TAG, "Z-Wave proxy response");
+  }
 }
 #endif
 
@@ -1550,15 +1554,50 @@ void APIConnection::send_infrared_rf_receive_event(const InfraredRFReceiveEvent
 #endif
 
 #ifdef USE_SERIAL_PROXY
+static enums::SerialProxyStatus serial_proxy_result_to_status(serial_proxy::SerialProxyResult result) {
+  switch (result) {
+    case serial_proxy::SerialProxyResult::SERIAL_PROXY_RESULT_OK:
+      return enums::SERIAL_PROXY_STATUS_OK;
+    case serial_proxy::SerialProxyResult::SERIAL_PROXY_RESULT_ASSUMED_SUCCESS:
+      return enums::SERIAL_PROXY_STATUS_ASSUMED_SUCCESS;
+    case serial_proxy::SerialProxyResult::SERIAL_PROXY_RESULT_PORT_IN_USE:
+      return enums::SERIAL_PROXY_STATUS_PORT_IN_USE;
+    case serial_proxy::SerialProxyResult::SERIAL_PROXY_RESULT_INVALID_ARGUMENT:
+      return enums::SERIAL_PROXY_STATUS_INVALID_ARGUMENT;
+    case serial_proxy::SerialProxyResult::SERIAL_PROXY_RESULT_TIMEOUT:
+      return enums::SERIAL_PROXY_STATUS_TIMEOUT;
+    case serial_proxy::SerialProxyResult::SERIAL_PROXY_RESULT_NOT_SUPPORTED:
+      return enums::SERIAL_PROXY_STATUS_NOT_SUPPORTED;
+    case serial_proxy::SerialProxyResult::SERIAL_PROXY_RESULT_ERROR:
+      return enums::SERIAL_PROXY_STATUS_ERROR;
+  }
+  return enums::SERIAL_PROXY_STATUS_ERROR;  // Unreachable; all enum values handled above
+}
+
+static void send_serial_proxy_ack(APIConnection *conn, uint32_t instance, enums::SerialProxyRequestType type,
+                                  enums::SerialProxyStatus status) {
+  SerialProxyRequestResponse resp{};
+  resp.instance = instance;
+  resp.type = type;
+  resp.status = status;
+  if (!conn->send_message(resp)) {
+    API_LOG_MSG_DROPPED(TAG, "Serial proxy response");
+  }
+}
+
 void APIConnection::on_serial_proxy_configure_request(const SerialProxyConfigureRequest &msg) {
   auto &proxies = App.get_serial_proxies();
   if (msg.instance >= proxies.size()) {
     ESP_LOGW(TAG, "Serial proxy instance %" PRIu32 " out of range (max %" PRIu32 ")", msg.instance,
              static_cast<uint32_t>(proxies.size()));
+    send_serial_proxy_ack(this, msg.instance, enums::SERIAL_PROXY_REQUEST_TYPE_CONFIGURE,
+                          enums::SERIAL_PROXY_STATUS_INVALID_ARGUMENT);
     return;
   }
-  proxies[msg.instance]->configure(this, msg.baudrate, msg.flow_control, static_cast<uint8_t>(msg.parity),
-                                   msg.stop_bits, msg.data_size);
+  serial_proxy::SerialProxyResult result = proxies[msg.instance]->configure(
+      this, msg.baudrate, msg.flow_control, static_cast<uint8_t>(msg.parity), msg.stop_bits, msg.data_size);
+  send_serial_proxy_ack(this, msg.instance, enums::SERIAL_PROXY_REQUEST_TYPE_CONFIGURE,
+                        serial_proxy_result_to_status(result));
 }
 
 void APIConnection::on_serial_proxy_write_request(const SerialProxyWriteRequest &msg) {
@@ -1574,20 +1613,30 @@ void APIConnection::on_serial_proxy_set_modem_pins_request(const SerialProxySetM
   auto &proxies = App.get_serial_proxies();
   if (msg.instance >= proxies.size()) {
     ESP_LOGW(TAG, "Serial proxy instance %" PRIu32 " out of range", msg.instance);
+    send_serial_proxy_ack(this, msg.instance, enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS,
+                          enums::SERIAL_PROXY_STATUS_INVALID_ARGUMENT);
     return;
   }
-  proxies[msg.instance]->set_modem_pins(this, msg.line_states);
+  serial_proxy::SerialProxyResult result = proxies[msg.instance]->set_modem_pins(this, msg.line_states);
+  send_serial_proxy_ack(this, msg.instance, enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS,
+                        serial_proxy_result_to_status(result));
 }
 
 void APIConnection::on_serial_proxy_get_modem_pins_request(const SerialProxyGetModemPinsRequest &msg) {
   auto &proxies = App.get_serial_proxies();
-  if (msg.instance >= proxies.size()) {
-    ESP_LOGW(TAG, "Serial proxy instance %" PRIu32 " out of range", msg.instance);
-    return;
-  }
   SerialProxyGetModemPinsResponse resp{};
   resp.instance = msg.instance;
-  resp.line_states = proxies[msg.instance]->get_modem_pins();
+  if (msg.instance >= proxies.size()) {
+    ESP_LOGW(TAG, "Serial proxy instance %" PRIu32 " out of range", msg.instance);
+    // Pre-1.16 clients do not read the status field and would take this error
+    // for a successful "both pins deasserted" answer; let them time out as before
+    if (!this->client_supports_api_version(1, 16)) {
+      return;
+    }
+    resp.status = enums::SERIAL_PROXY_STATUS_INVALID_ARGUMENT;
+  } else {
+    resp.line_states = proxies[msg.instance]->get_modem_pins();
+  }
   if (!this->send_message(resp)) {
     API_LOG_MSG_DROPPED(TAG, "Serial proxy response");
   }
@@ -1597,40 +1646,31 @@ void APIConnection::on_serial_proxy_request(const SerialProxyRequest &msg) {
   auto &proxies = App.get_serial_proxies();
   if (msg.instance >= proxies.size()) {
     ESP_LOGW(TAG, "Serial proxy instance %" PRIu32 " out of range", msg.instance);
+    send_serial_proxy_ack(this, msg.instance, msg.type, enums::SERIAL_PROXY_STATUS_INVALID_ARGUMENT);
     return;
   }
+  auto *proxy = proxies[msg.instance];
+  enums::SerialProxyStatus status;
   switch (msg.type) {
     case enums::SERIAL_PROXY_REQUEST_TYPE_SUBSCRIBE:
     case enums::SERIAL_PROXY_REQUEST_TYPE_UNSUBSCRIBE:
-      proxies[msg.instance]->serial_proxy_request(this, msg.type);
+      status = serial_proxy_result_to_status(proxy->serial_proxy_request(this, msg.type));
       break;
-    case enums::SERIAL_PROXY_REQUEST_TYPE_FLUSH: {
-      SerialProxyRequestResponse resp{};
-      resp.instance = msg.instance;
-      resp.type = enums::SERIAL_PROXY_REQUEST_TYPE_FLUSH;
-      switch (proxies[msg.instance]->flush_port()) {
-        case uart::UARTFlushResult::UART_FLUSH_RESULT_SUCCESS:
-          resp.status = enums::SERIAL_PROXY_STATUS_OK;
-          break;
-        case uart::UARTFlushResult::UART_FLUSH_RESULT_ASSUMED_SUCCESS:
-          resp.status = enums::SERIAL_PROXY_STATUS_ASSUMED_SUCCESS;
-          break;
-        case uart::UARTFlushResult::UART_FLUSH_RESULT_TIMEOUT:
-          resp.status = enums::SERIAL_PROXY_STATUS_TIMEOUT;
-          break;
-        case uart::UARTFlushResult::UART_FLUSH_RESULT_FAILED:
-          resp.status = enums::SERIAL_PROXY_STATUS_ERROR;
-          break;
-      }
-      if (!this->send_message(resp)) {
-        API_LOG_MSG_DROPPED(TAG, "Serial proxy response");
-      }
+    case enums::SERIAL_PROXY_REQUEST_TYPE_FLUSH:
+      status = serial_proxy_result_to_status(proxy->flush_port(this));
+      break;
+    case enums::SERIAL_PROXY_REQUEST_TYPE_CONFIGURE:
+    case enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS:
+      // Response-only discriminators; never valid in a request
+      ESP_LOGW(TAG, "Response-only serial proxy request type: %" PRIu32, static_cast<uint32_t>(msg.type));
+      status = enums::SERIAL_PROXY_STATUS_INVALID_ARGUMENT;
       break;
-    }
     default:
       ESP_LOGW(TAG, "Unknown serial proxy request type: %" PRIu32, static_cast<uint32_t>(msg.type));
+      status = enums::SERIAL_PROXY_STATUS_NOT_SUPPORTED;
       break;
   }
+  send_serial_proxy_ack(this, msg.instance, msg.type, status);
 }
 
 void APIConnection::send_serial_proxy_data(const SerialProxyDataReceived &msg) {
@@ -1749,15 +1789,17 @@ void APIConnection::complete_authentication_() {
 bool APIConnection::send_hello_response_(const HelloRequest &msg) {
   // Copy client name with truncation if needed (set_client_name handles truncation)
   this->helper_->set_client_name(msg.client_info.c_str(), msg.client_info.size());
-  this->client_api_version_major_ = msg.api_version_major;
-  this->client_api_version_minor_ = msg.api_version_minor;
+  this->client_api_version_major_ =
+      static_cast<uint8_t>(std::min<uint32_t>(msg.api_version_major, std::numeric_limits<uint8_t>::max()));
+  this->client_api_version_minor_ =
+      static_cast<uint8_t>(std::min<uint32_t>(msg.api_version_minor, std::numeric_limits<uint8_t>::max()));
   char peername[socket::SOCKADDR_STR_LEN];
-  ESP_LOGV(TAG, "Hello from client: '%s' | %s | API Version %" PRIu16 ".%" PRIu16, this->helper_->get_client_name(),
+  ESP_LOGV(TAG, "Hello from client: '%s' | %s | API Version %u.%u", this->helper_->get_client_name(),
            this->helper_->get_peername_to(peername), this->client_api_version_major_, this->client_api_version_minor_);
 
   HelloResponse resp;
   resp.api_version_major = 1;
-  resp.api_version_minor = 15;
+  resp.api_version_minor = 16;
   // Send only the version string - the client only logs this for debugging and doesn't use it otherwise
   resp.server_info = ESPHOME_VERSION_REF;
   resp.name = StringRef(App.get_name());
@@ -1891,6 +1933,7 @@ bool APIConnection::send_device_info_response_() {
     auto &info = resp.serial_proxies[serial_proxy_index++];
     info.name = StringRef(proxy->get_name());
     info.port_type = proxy->get_port_type();
+    info.configured_line_states = proxy->get_configured_modem_pins();
   }
 #endif
 #ifdef USE_API_NOISE
@@ -1951,6 +1994,7 @@ bool APIConnection::send_device_capabilities_response_() {
     auto &info = resp.serial_proxies[serial_proxy_index++];
     info.name = StringRef(proxy->get_name());
     info.port_type = proxy->get_port_type();
+    info.configured_line_states = proxy->get_configured_modem_pins();
   }
 #endif
   return this->send_message(resp);
@@ -2181,7 +2225,7 @@ bool APIConnection::try_to_clear_buffer_slow_(bool log_out_of_space) {
   }
   return false;
 }
-bool APIConnection::send_message_(uint32_t payload_size, uint8_t message_type, MessageEncodeFn encode_fn,
+bool APIConnection::send_message_(uint32_t payload_size, uint16_t message_type, MessageEncodeFn encode_fn,
                                   const void *msg) {
 #ifdef HAS_PROTO_MESSAGE_DUMP
   // Skip dump for log messages (recursive logging risk) and camera frames (high-frequency noise)
@@ -2210,7 +2254,7 @@ uint16_t APIConnection::encode_to_buffer_slow(uint32_t calculated_size, MessageE
                                               APIConnection *conn, uint32_t remaining_size) {
   return encode_to_buffer(calculated_size, encode_fn, msg, conn, remaining_size);
 }
-bool APIConnection::send_buffer(ProtoWriteBuffer buffer, uint8_t message_type) {
+bool APIConnection::send_buffer(ProtoWriteBuffer buffer, uint16_t message_type) {
   const bool is_log_message = (message_type == SubscribeLogsResponse::MESSAGE_TYPE);
 
   if (!this->try_to_clear_buffer(!is_log_message)) {
@@ -2240,12 +2284,12 @@ void APIConnection::on_fatal_error() {
   this->flags_.remove = true;
 }
 
-bool APIConnection::schedule_message_front_(EntityBase *entity, uint8_t message_type, uint8_t estimated_size) {
+bool APIConnection::schedule_message_front_(EntityBase *entity, uint16_t message_type, uint8_t estimated_size) {
   this->deferred_batch_.add_item_front(entity, message_type, estimated_size);
   return this->schedule_batch_();
 }
 
-bool APIConnection::send_message_smart_(EntityBase *entity, uint8_t message_type, uint8_t estimated_size,
+bool APIConnection::send_message_smart_(EntityBase *entity, uint16_t message_type, uint8_t estimated_size,
                                         uint8_t aux_data_index) {
   if (this->should_send_immediately_(message_type) && this->helper_->can_write_without_blocking()) {
     auto &shared_buf = this->parent_->get_shared_buffer_ref();

esphome/components/api/api_connection.h

@@ -326,8 +326,10 @@ class APIConnection final : public APIServerConnectionBase {
   bool is_marked_for_removal() const { return this->flags_.remove; }
   uint8_t get_log_subscription_level() const { return this->flags_.log_subscription; }
 
-  // Get client API version for feature detection
-  bool client_supports_api_version(uint16_t major, uint16_t minor) const {
+  // Get client API version for feature detection.
+  // Stored versions saturate at 255 (see send_hello_response_), so requesting
+  // a minimum above that can never match.
+  bool client_supports_api_version(uint8_t major, uint8_t minor) const {
     return this->client_api_version_major_ > major ||
            (this->client_api_version_major_ == major && this->client_api_version_minor_ >= minor);
   }
@@ -374,7 +376,7 @@ class APIConnection final : public APIServerConnectionBase {
       return true;
     return this->try_to_clear_buffer_slow_(log_out_of_space);
   }
-  bool send_buffer(ProtoWriteBuffer buffer, uint8_t message_type);
+  bool send_buffer(ProtoWriteBuffer buffer, uint16_t message_type);
 
   const char *get_name() const { return this->helper_->get_client_name(); }
   /// Get peer name (IP address) into caller-provided buffer, returns buf for convenience
@@ -423,7 +425,7 @@ class APIConnection final : public APIServerConnectionBase {
   }
 
   // Non-template buffer management for send_message
-  bool send_message_(uint32_t payload_size, uint8_t message_type, MessageEncodeFn encode_fn, const void *msg);
+  bool send_message_(uint32_t payload_size, uint16_t message_type, MessageEncodeFn encode_fn, const void *msg);
 
   // Core batch encoding logic. ALWAYS_INLINE so encode_fn devirtualizes at hot call sites.
   // Defined in api_connection_buffer.h (needs APIServer complete).
@@ -664,10 +666,9 @@ class APIConnection final : public APIServerConnectionBase {
 
     struct BatchItem {
       EntityBase *entity;                       // 4 bytes - Entity pointer
-      uint8_t message_type;                     // 1 byte - Message type for protocol and dispatch
+      uint16_t message_type;                    // 2 bytes - Message type for protocol and dispatch
       uint8_t estimated_size;                   // 1 byte - Estimated message size (max 255 bytes)
       uint8_t aux_data_index{AUX_DATA_UNUSED};  // 1 byte - For events: index into entity's event_types
-      // 1 byte padding
     };
 
     std::vector<BatchItem> items;
@@ -677,7 +678,7 @@ class APIConnection final : public APIServerConnectionBase {
     // connections that do, buffers are released after initial sync anyway
 
     // Add item to the batch (with deduplication)
-    void add_item(EntityBase *entity, uint8_t message_type, uint8_t estimated_size,
+    void add_item(EntityBase *entity, uint16_t message_type, uint8_t estimated_size,
                   uint8_t aux_data_index = AUX_DATA_UNUSED) {
       // Dedup: O(n) scan but optimized for RAM over performance
       // Skip deduplication for events - they are edge-triggered, every occurrence matters
@@ -693,7 +694,7 @@ class APIConnection final : public APIServerConnectionBase {
       this->items.push_back({entity, message_type, estimated_size, aux_data_index});
     }
     // Add item to the front of the batch (for high priority messages like ping)
-    void add_item_front(EntityBase *entity, uint8_t message_type, uint8_t estimated_size) {
+    void add_item_front(EntityBase *entity, uint16_t message_type, uint8_t estimated_size) {
       // Swap to front avoids expensive vector::insert which shifts all elements
       this->items.push_back({entity, message_type, estimated_size, AUX_DATA_UNUSED});
       if (this->items.size() > 1) {
@@ -758,13 +759,15 @@ class APIConnection final : public APIServerConnectionBase {
 #endif
   } flags_{};  // 2 bytes total
 
-  // 2-byte types immediately after flags_ (no padding between them)
-  uint16_t client_api_version_major_{0};
-  uint16_t client_api_version_minor_{0};
+  // 2-byte type immediately after flags_ (no padding between them)
+  uint16_t batch_message_type_{0};  // Current message type during batch encoding
   // 1-byte types to fill remaining space before next 4-byte boundary
+  // Client API versions are clamped to 255 on receive (see send_hello_response_)
+  uint8_t client_api_version_major_{0};
+  uint8_t client_api_version_minor_{0};
   ActiveIterator active_iterator_{ActiveIterator::NONE};
-  uint8_t batch_message_type_{0};  // Current message type during batch encoding
-  // Total: 2 (flags) + 2 + 2 + 1 + 1 = 8 bytes, aligned to 4-byte boundary
+  // Total: 2 (flags) + 2 + 1 + 1 + 1 + 1 (batch_header_size_ below) = 8 bytes,
+  // aligned to 4-byte boundary
 
   // Actual header size used by encode_to_buffer for the current message.
   // Read by process_batch_multi_ to pass into MessageInfo.
@@ -813,7 +816,7 @@ class APIConnection final : public APIServerConnectionBase {
   // 2. It's an EventResponse (events are edge-triggered - every occurrence matters)
   // 3. OR: User has opted into immediate sending (should_try_send_immediately = true
   //    AND batch_delay = 0)
-  inline bool should_send_immediately_(uint8_t message_type) const {
+  inline bool should_send_immediately_(uint16_t message_type) const {
     return (
 #ifdef USE_UPDATE
         message_type == UpdateStateResponse::MESSAGE_TYPE ||
@@ -827,11 +830,11 @@ class APIConnection final : public APIServerConnectionBase {
   // Helper method to send a message either immediately or via batching
   // Tries immediate send if should_send_immediately_() returns true and buffer has space
   // Falls back to batching if immediate send fails or isn't applicable
-  bool send_message_smart_(EntityBase *entity, uint8_t message_type, uint8_t estimated_size,
+  bool send_message_smart_(EntityBase *entity, uint16_t message_type, uint8_t estimated_size,
                            uint8_t aux_data_index = DeferredBatch::AUX_DATA_UNUSED);
 
   // Helper function to schedule a deferred message with known message type
-  bool schedule_message_(EntityBase *entity, uint8_t message_type, uint8_t estimated_size,
+  bool schedule_message_(EntityBase *entity, uint16_t message_type, uint8_t estimated_size,
                          uint8_t aux_data_index = DeferredBatch::AUX_DATA_UNUSED) {
     this->deferred_batch_.add_item(entity, message_type, estimated_size, aux_data_index);
     return this->schedule_batch_();
@@ -839,7 +842,7 @@ class APIConnection final : public APIServerConnectionBase {
 
   // Helper function to schedule a high priority message at the front of the batch
   // Out-of-line: callers (on_shutdown, check_keepalive_) are cold paths
-  bool schedule_message_front_(EntityBase *entity, uint8_t message_type, uint8_t estimated_size);
+  bool schedule_message_front_(EntityBase *entity, uint16_t message_type, uint8_t estimated_size);
 
   // Helper function to log client messages with name and peername
   void log_client_(int level, const LogString *message);

esphome/components/api/api_frame_helper.cpp

@@ -172,7 +172,7 @@ APIError APIFrameHelper::write_raw_iov_(const struct iovec *iov, int iovcnt, uin
 
   // Queue unsent data into overflow buffer
   if (!this->overflow_buf_.enqueue_iov(iov, iovcnt, total_write_len, static_cast<uint16_t>(sent))) {
-    HELPER_LOG("Overflow buffer full, dropping connection");
+    HELPER_LOG("Overflow buffer full or out of memory, dropping connection");
     this->state_ = State::FAILED;
     return APIError::SOCKET_WRITE_FAILED;
   }

esphome/components/api/api_frame_helper.h

@@ -49,16 +49,16 @@ struct ReadPacketBuffer {
 };
 
 // Packed message info structure to minimize memory usage
-// Note: message_type is uint8_t — all current protobuf message types fit in 8 bits.
-// The noise wire format encodes types as 16-bit, but the high byte is always 0.
-// If message types ever exceed 255, this and encrypt_noise_message_ must be updated.
+// message_type matches the wire formats: noise carries a fixed 16-bit type
+// field, plaintext a type varint. The proto codegen caps message IDs at 16383
+// so the plaintext type varint fits the 2 bytes budgeted in HEADER_PADDING.
 struct MessageInfo {
   uint16_t offset;        // Offset in buffer where message starts
   uint16_t payload_size;  // Size of the message payload
-  uint8_t message_type;   // Message type (0-255)
+  uint16_t message_type;  // Message type (0-16383)
   uint8_t header_size;    // Actual header size used (avoids recomputation in write path)
 
-  MessageInfo(uint8_t type, uint16_t off, uint16_t size, uint8_t hdr)
+  MessageInfo(uint16_t type, uint16_t off, uint16_t size, uint8_t hdr)
       : offset(off), payload_size(size), message_type(type), header_size(hdr) {}
 };
 
@@ -173,7 +173,7 @@ class APIFrameHelper {
   }
   // Write a single protobuf message - the hot path (87-100% of all writes).
   // Caller must ensure state is DATA before calling.
-  virtual APIError write_protobuf_packet(uint8_t type, ProtoWriteBuffer buffer) = 0;
+  virtual APIError write_protobuf_packet(uint16_t type, ProtoWriteBuffer buffer) = 0;
   // Write multiple protobuf messages in a single batched operation.
   // Caller must ensure state is DATA and messages is not empty.
   // messages contains (message_type, offset, length) for each message in the buffer.
@@ -187,15 +187,15 @@ class APIFrameHelper {
   // Distinguishes protocols via frame_footer_size_ (noise always has a non-zero MAC
   // footer, plaintext has footer=0). If a protocol with a plaintext footer is ever
   // added, this should become a virtual method.
-  uint8_t frame_header_size(uint16_t payload_size, uint8_t message_type) const {
+  uint8_t frame_header_size(uint16_t payload_size, uint16_t message_type) const {
 #if defined(USE_API_NOISE) && defined(USE_API_PLAINTEXT)
     return this->frame_footer_size_
                ? this->frame_header_padding_
-               : static_cast<uint8_t>(1 + ProtoSize::varint16(payload_size) + ProtoSize::varint8(message_type));
+               : static_cast<uint8_t>(1 + ProtoSize::varint16(payload_size) + ProtoSize::varint16(message_type));
 #elif defined(USE_API_NOISE)
     return this->frame_header_padding_;
 #else  // USE_API_PLAINTEXT only
-    return static_cast<uint8_t>(1 + ProtoSize::varint16(payload_size) + ProtoSize::varint8(message_type));
+    return static_cast<uint8_t>(1 + ProtoSize::varint16(payload_size) + ProtoSize::varint16(message_type));
 #endif
   }
   // Get the frame footer size required by this protocol

esphome/components/api/api_frame_helper_noise.cpp

@@ -442,7 +442,7 @@ APIError APINoiseFrameHelper::read_packet(ReadPacketBuffer *buffer) {
 }
 // Encrypt a single noise message in place and return the encrypted frame length.
 // Returns APIError::OK on success.
-APIError APINoiseFrameHelper::encrypt_noise_message_(uint8_t *buf_start, uint16_t payload_size, uint8_t message_type,
+APIError APINoiseFrameHelper::encrypt_noise_message_(uint8_t *buf_start, uint16_t payload_size, uint16_t message_type,
                                                      uint16_t &encrypted_len_out) {
   // The noise frame header is written after encryption, when the size is known
 
@@ -472,7 +472,7 @@ APIError APINoiseFrameHelper::encrypt_noise_message_(uint8_t *buf_start, uint16_
   return APIError::OK;
 }
 
-APIError APINoiseFrameHelper::write_protobuf_packet(uint8_t type, ProtoWriteBuffer buffer) {
+APIError APINoiseFrameHelper::write_protobuf_packet(uint16_t type, ProtoWriteBuffer buffer) {
 #ifdef ESPHOME_DEBUG_API
   assert(this->state_ == State::DATA);
 #endif

esphome/components/api/api_frame_helper_noise.h

@@ -31,7 +31,7 @@ class APINoiseFrameHelper final : public APIFrameHelper {
 #endif
   APIError loop() override;
   APIError read_packet(ReadPacketBuffer *buffer) override;
-  APIError write_protobuf_packet(uint8_t type, ProtoWriteBuffer buffer) override;
+  APIError write_protobuf_packet(uint16_t type, ProtoWriteBuffer buffer) override;
   APIError write_protobuf_messages(ProtoWriteBuffer buffer, std::span<const MessageInfo> messages) override;
 
  protected:
@@ -44,7 +44,7 @@ class APINoiseFrameHelper final : public APIFrameHelper {
   APIError state_action_handshake_write_();
   APIError try_read_frame_();
   APIError write_frame_(const uint8_t *data, uint16_t len);
-  APIError encrypt_noise_message_(uint8_t *buf_start, uint16_t payload_size, uint8_t message_type,
+  APIError encrypt_noise_message_(uint8_t *buf_start, uint16_t payload_size, uint16_t message_type,
                                   uint16_t &encrypted_len_out);
   APIError init_handshake_();
   APIError check_handshake_finished_();

esphome/components/api/api_frame_helper_plaintext.cpp

@@ -5,6 +5,7 @@
 #include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
+#include "api_pb2.h"
 #include "proto.h"
 #include <cstring>
 #include <cinttypes>
@@ -252,24 +253,21 @@ ESPHOME_ALWAYS_INLINE static inline void encode_varint_16(uint16_t value, uint8_
   *p = static_cast<uint8_t>(value);
 }
 
-// Encode an 8-bit varint (1-2 bytes) using pre-computed length.
-ESPHOME_ALWAYS_INLINE static inline void encode_varint_8(uint8_t value, uint8_t varint_len, uint8_t *p) {
-  if (varint_len == 2) {
-    *p++ = static_cast<uint8_t>(value | 0x80);
-    *p = static_cast<uint8_t>(value >> 7);
-  } else {
-    *p = value;
-  }
-}
+// The generator rejects message IDs above MAX_MESSAGE_TYPE, so the type varint
+// can never outgrow the 2 bytes HEADER_PADDING budgets for it. Without this
+// bound, write_plaintext_header's header_offset would underflow for the first
+// message in a batch and the header write would land outside the buffer.
+static_assert(1 + 3 + ProtoSize::varint16(MAX_MESSAGE_TYPE) <= APIPlaintextFrameHelper::HEADER_PADDING,
+              "HEADER_PADDING cannot fit the type varint of the largest message ID");
 
 // Write plaintext header into pre-allocated padding before payload.
 // padding_size: bytes reserved before payload (HEADER_PADDING for first/single msg,
 //               actual header size for contiguous batch messages).
 // Returns the total header length (indicator + varints).
 ESPHOME_ALWAYS_INLINE static inline uint8_t write_plaintext_header(uint8_t *buf_start, uint16_t payload_size,
-                                                                   uint8_t message_type, uint8_t padding_size) {
+                                                                   uint16_t message_type, uint8_t padding_size) {
   uint8_t size_varint_len = ProtoSize::varint16(payload_size);
-  uint8_t type_varint_len = ProtoSize::varint8(message_type);
+  uint8_t type_varint_len = ProtoSize::varint16(message_type);
   uint8_t total_header_len = 1 + size_varint_len + type_varint_len;
 
   // The header is right-justified within the padding so it sits immediately before payload.
@@ -292,12 +290,12 @@ ESPHOME_ALWAYS_INLINE static inline uint8_t write_plaintext_header(uint8_t *buf_
 
   // Encode varints directly into buffer using pre-computed lengths
   encode_varint_16(payload_size, size_varint_len, buf_start + header_offset + 1);
-  encode_varint_8(message_type, type_varint_len, buf_start + header_offset + 1 + size_varint_len);
+  encode_varint_16(message_type, type_varint_len, buf_start + header_offset + 1 + size_varint_len);
 
   return total_header_len;
 }
 
-APIError APIPlaintextFrameHelper::write_protobuf_packet(uint8_t type, ProtoWriteBuffer buffer) {
+APIError APIPlaintextFrameHelper::write_protobuf_packet(uint16_t type, ProtoWriteBuffer buffer) {
 #ifdef ESPHOME_DEBUG_API
   assert(this->state_ == State::DATA);
 #endif

esphome/components/api/api_frame_helper_plaintext.h

@@ -10,7 +10,8 @@ class APIPlaintextFrameHelper final : public APIFrameHelper {
   // Plaintext header structure (worst case):
   // Pos 0: indicator (0x00)
   // Pos 1-3: payload size varint (up to 3 bytes)
-  // Pos 4-5: message type varint (up to 2 bytes)
+  // Pos 4-5: message type varint (up to 2 bytes; covers message IDs up to
+  //          16383, enforced by the proto codegen)
   // Pos 6+: actual payload data
   static constexpr uint8_t HEADER_PADDING = 1 + 3 + 2;  // indicator + size varint + type varint
 
@@ -21,7 +22,7 @@ class APIPlaintextFrameHelper final : public APIFrameHelper {
   APIError init() override;
   APIError loop() override;
   APIError read_packet(ReadPacketBuffer *buffer) override;
-  APIError write_protobuf_packet(uint8_t type, ProtoWriteBuffer buffer) override;
+  APIError write_protobuf_packet(uint16_t type, ProtoWriteBuffer buffer) override;
   APIError write_protobuf_messages(ProtoWriteBuffer buffer, std::span<const MessageInfo> messages) override;
 #ifdef USE_API_NOISE
   // After try_read_frame_ returned PROTOCOL_SWITCH_TO_NOISE: copy out the

esphome/components/api/api_overflow_buffer.cpp

@@ -1,6 +1,7 @@
 #include "api_overflow_buffer.h"
 #ifdef USE_API
 #include <cstring>
+#include <new>
 
 namespace esphome::api {
 
@@ -61,9 +62,18 @@ bool APIOverflowBuffer::enqueue_iov(const struct iovec *iov, int iovcnt, uint16_
     return false;
 
   uint16_t buffer_size = total_len - skip;
+  // nothrow: a failed allocation returns nullptr so the connection is dropped
+  // cleanly instead of plain new's crash or abort on OOM
   // NOLINTNEXTLINE(cppcoreguidelines-owning-memory)
-  auto *entry = new Entry{new uint8_t[buffer_size], buffer_size, 0};
-  this->queue_[this->tail_] = entry;
+  auto *data = new (std::nothrow) uint8_t[buffer_size];
+  if (data == nullptr)
+    return false;
+  // NOLINTNEXTLINE(cppcoreguidelines-owning-memory)
+  auto *entry = new (std::nothrow) Entry{data, buffer_size, 0};
+  if (entry == nullptr) {
+    delete[] data;
+    return false;
+  }
 
   uint16_t to_skip = skip;
   uint16_t write_pos = 0;
@@ -80,6 +90,8 @@ bool APIOverflowBuffer::enqueue_iov(const struct iovec *iov, int iovcnt, uint16_
     }
   }
 
+  // Publish only after the copy completes so a half-built entry is never reachable
+  this->queue_[this->tail_] = entry;
   this->tail_ = (this->tail_ + 1) % API_MAX_SEND_QUEUE;
   this->count_++;
   return true;

esphome/components/api/api_overflow_buffer.h

@@ -61,7 +61,7 @@ class APIOverflowBuffer {
 
   /// Enqueue unsent IOV data into the backlog.
   /// Copies iov data starting at byte offset `skip` into a new entry.
-  /// Returns false if the queue is full (caller should fail the connection).
+  /// Returns false if the queue is full or allocation fails (caller should fail the connection).
   bool enqueue_iov(const struct iovec *iov, int iovcnt, uint16_t total_len, uint16_t skip);
 
  protected:

esphome/components/api/api_pb2.cpp

@@ -102,12 +102,14 @@ uint8_t *SerialProxyInfo::encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PAR
   uint8_t *__restrict__ pos = buffer.get_pos();
   ProtoEncode::encode_string(pos PROTO_ENCODE_DEBUG_ARG, 1, this->name);
   ProtoEncode::encode_uint32(pos PROTO_ENCODE_DEBUG_ARG, 2, static_cast<uint32_t>(this->port_type));
+  ProtoEncode::encode_uint32(pos PROTO_ENCODE_DEBUG_ARG, 3, this->configured_line_states);
   return pos;
 }
 uint32_t SerialProxyInfo::calculate_size() const {
   uint32_t size = 0;
   size += ProtoSize::calc_length(1, this->name.size());
   size += this->port_type ? 2 : 0;
+  size += ProtoSize::calc_uint32(1, this->configured_line_states);
   return size;
 }
 #endif
@@ -2321,7 +2323,6 @@ uint8_t *ListEntitiesMediaPlayerResponse::encode(ProtoWriteBuffer &buffer PROTO_
 #endif
   ProtoEncode::encode_bool(pos PROTO_ENCODE_DEBUG_ARG, 6, this->disabled_by_default);
   ProtoEncode::encode_uint32(pos PROTO_ENCODE_DEBUG_ARG, 7, static_cast<uint32_t>(this->entity_category));
-  ProtoEncode::encode_bool(pos PROTO_ENCODE_DEBUG_ARG, 8, this->supports_pause);
   for (auto &it : this->supported_formats) {
     ProtoEncode::encode_sub_message(pos PROTO_ENCODE_DEBUG_ARG, buffer, 9, it);
   }
@@ -2341,7 +2342,6 @@ uint32_t ListEntitiesMediaPlayerResponse::calculate_size() const {
 #endif
   size += ProtoSize::calc_bool(1, this->disabled_by_default);
   size += this->entity_category ? 2 : 0;
-  size += ProtoSize::calc_bool(1, this->supports_pause);
   if (!this->supported_formats.empty()) {
     for (const auto &it : this->supported_formats) {
       size += ProtoSize::calc_message_force(1, it.calculate_size());
@@ -3942,6 +3942,18 @@ uint32_t ZWaveProxyRequest::calculate_size() const {
   size += ProtoSize::calc_length(1, this->data_len);
   return size;
 }
+uint8_t *ZWaveProxyRequestResponse::encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) const {
+  uint8_t *__restrict__ pos = buffer.get_pos();
+  ProtoEncode::encode_uint32(pos PROTO_ENCODE_DEBUG_ARG, 1, static_cast<uint32_t>(this->type));
+  ProtoEncode::encode_uint32(pos PROTO_ENCODE_DEBUG_ARG, 2, static_cast<uint32_t>(this->status));
+  return pos;
+}
+uint32_t ZWaveProxyRequestResponse::calculate_size() const {
+  uint32_t size = 0;
+  size += this->type ? 2 : 0;
+  size += this->status ? 2 : 0;
+  return size;
+}
 #endif
 #ifdef USE_INFRARED
 uint8_t *ListEntitiesInfraredResponse::encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) const {
@@ -4184,12 +4196,14 @@ uint8_t *SerialProxyGetModemPinsResponse::encode(ProtoWriteBuffer &buffer PROTO_
   uint8_t *__restrict__ pos = buffer.get_pos();
   ProtoEncode::encode_uint32(pos PROTO_ENCODE_DEBUG_ARG, 1, this->instance);
   ProtoEncode::encode_uint32(pos PROTO_ENCODE_DEBUG_ARG, 2, this->line_states);
+  ProtoEncode::encode_uint32(pos PROTO_ENCODE_DEBUG_ARG, 3, static_cast<uint32_t>(this->status));
   return pos;
 }
 uint32_t SerialProxyGetModemPinsResponse::calculate_size() const {
   uint32_t size = 0;
   size += ProtoSize::calc_uint32(1, this->instance);
   size += ProtoSize::calc_uint32(1, this->line_states);
+  size += this->status ? 2 : 0;
   return size;
 }
 bool SerialProxyRequest::decode_varint(uint32_t field_id, proto_varint_value_t value) {

esphome/components/api/api_pb2_dump.cpp

@@ -816,6 +816,18 @@ template<> const char *proto_enum_to_string<enums::ZWaveProxyRequestType>(enums:
       return ESPHOME_PSTR("UNKNOWN");
   }
 }
+template<> const char *proto_enum_to_string<enums::ZWaveProxyStatus>(enums::ZWaveProxyStatus value) {
+  switch (value) {
+    case enums::ZWAVE_PROXY_STATUS_OK:
+      return ESPHOME_PSTR("ZWAVE_PROXY_STATUS_OK");
+    case enums::ZWAVE_PROXY_STATUS_IN_USE:
+      return ESPHOME_PSTR("ZWAVE_PROXY_STATUS_IN_USE");
+    case enums::ZWAVE_PROXY_STATUS_NOT_SUPPORTED:
+      return ESPHOME_PSTR("ZWAVE_PROXY_STATUS_NOT_SUPPORTED");
+    default:
+      return ESPHOME_PSTR("UNKNOWN");
+  }
+}
 #endif
 #ifdef USE_SERIAL_PROXY
 template<> const char *proto_enum_to_string<enums::SerialProxyParity>(enums::SerialProxyParity value) {
@@ -838,6 +850,10 @@ template<> const char *proto_enum_to_string<enums::SerialProxyRequestType>(enums
       return ESPHOME_PSTR("SERIAL_PROXY_REQUEST_TYPE_UNSUBSCRIBE");
     case enums::SERIAL_PROXY_REQUEST_TYPE_FLUSH:
       return ESPHOME_PSTR("SERIAL_PROXY_REQUEST_TYPE_FLUSH");
+    case enums::SERIAL_PROXY_REQUEST_TYPE_CONFIGURE:
+      return ESPHOME_PSTR("SERIAL_PROXY_REQUEST_TYPE_CONFIGURE");
+    case enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS:
+      return ESPHOME_PSTR("SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS");
     default:
       return ESPHOME_PSTR("UNKNOWN");
   }
@@ -854,6 +870,10 @@ template<> const char *proto_enum_to_string<enums::SerialProxyStatus>(enums::Ser
       return ESPHOME_PSTR("SERIAL_PROXY_STATUS_TIMEOUT");
     case enums::SERIAL_PROXY_STATUS_NOT_SUPPORTED:
       return ESPHOME_PSTR("SERIAL_PROXY_STATUS_NOT_SUPPORTED");
+    case enums::SERIAL_PROXY_STATUS_PORT_IN_USE:
+      return ESPHOME_PSTR("SERIAL_PROXY_STATUS_PORT_IN_USE");
+    case enums::SERIAL_PROXY_STATUS_INVALID_ARGUMENT:
+      return ESPHOME_PSTR("SERIAL_PROXY_STATUS_INVALID_ARGUMENT");
     default:
       return ESPHOME_PSTR("UNKNOWN");
   }
@@ -914,6 +934,7 @@ const char *SerialProxyInfo::dump_to(DumpBuffer &out) const {
   MessageDumpHelper helper(out, ESPHOME_PSTR("SerialProxyInfo"));
   dump_field(out, ESPHOME_PSTR("name"), this->name);
   dump_field(out, ESPHOME_PSTR("port_type"), static_cast<enums::SerialProxyPortType>(this->port_type));
+  dump_field(out, ESPHOME_PSTR("configured_line_states"), this->configured_line_states);
   return out.c_str();
 }
 #endif
@@ -1941,7 +1962,6 @@ const char *ListEntitiesMediaPlayerResponse::dump_to(DumpBuffer &out) const {
 #endif
   dump_field(out, ESPHOME_PSTR("disabled_by_default"), this->disabled_by_default);
   dump_field(out, ESPHOME_PSTR("entity_category"), static_cast<enums::EntityCategory>(this->entity_category));
-  dump_field(out, ESPHOME_PSTR("supports_pause"), this->supports_pause);
   for (const auto &it : this->supported_formats) {
     out.append(4, ' ').append_p(ESPHOME_PSTR("supported_formats")).append(": ");
     it.dump_to(out);
@@ -2644,6 +2664,12 @@ const char *ZWaveProxyRequest::dump_to(DumpBuffer &out) const {
   dump_bytes_field(out, ESPHOME_PSTR("data"), this->data, this->data_len);
   return out.c_str();
 }
+const char *ZWaveProxyRequestResponse::dump_to(DumpBuffer &out) const {
+  MessageDumpHelper helper(out, ESPHOME_PSTR("ZWaveProxyRequestResponse"));
+  dump_field(out, ESPHOME_PSTR("type"), static_cast<enums::ZWaveProxyRequestType>(this->type));
+  dump_field(out, ESPHOME_PSTR("status"), static_cast<enums::ZWaveProxyStatus>(this->status));
+  return out.c_str();
+}
 #endif
 #ifdef USE_INFRARED
 const char *ListEntitiesInfraredResponse::dump_to(DumpBuffer &out) const {
@@ -2753,6 +2779,7 @@ const char *SerialProxyGetModemPinsResponse::dump_to(DumpBuffer &out) const {
   MessageDumpHelper helper(out, ESPHOME_PSTR("SerialProxyGetModemPinsResponse"));
   dump_field(out, ESPHOME_PSTR("instance"), this->instance);
   dump_field(out, ESPHOME_PSTR("line_states"), this->line_states);
+  dump_field(out, ESPHOME_PSTR("status"), static_cast<enums::SerialProxyStatus>(this->status));
   return out.c_str();
 }
 const char *SerialProxyRequest::dump_to(DumpBuffer &out) const {

esphome/components/api/proto.h

@@ -684,11 +684,6 @@ class ProtoSize {
     return value < VARINT_THRESHOLD_1_BYTE ? 1 : (value < VARINT_THRESHOLD_2_BYTE ? 2 : 3);
   }
 
-  // Varint encoded length for an 8-bit value (1 or 2 bytes).
-  static constexpr inline uint8_t ESPHOME_ALWAYS_INLINE varint8(uint8_t value) {
-    return value < VARINT_THRESHOLD_1_BYTE ? 1 : 2;
-  }
-
   /**
    * @brief Calculates the size in bytes needed to encode a uint32_t value as a varint
    *

esphome/components/audio/__init__.py

@@ -7,6 +7,7 @@ from esphome.components.esp32 import (
     add_idf_component,
     add_idf_sdkconfig_option,
     include_builtin_idf_component,
+    require_certificate_bundle,
 )
 import esphome.config_validation as cv
 from esphome.const import (
@@ -335,6 +336,8 @@ def _emit_memory_pair(value: str | None, psram_key: str, internal_key: str) -> N
 async def to_code(config: ConfigType) -> None:
     # Re-enable ESP-IDF's HTTP client (excluded by default to save compile time)
     include_builtin_idf_component("esp_http_client")
+    # HTTPS streams verify the server against the root certificate bundle
+    require_certificate_bundle()
 
     add_idf_component(
         name="esphome/esp-audio-libs",

esphome/components/audio_http/audio_http_media_source.cpp

@@ -30,8 +30,9 @@ void AudioHTTPMediaSource::dump_config() {
   ESP_LOGCONFIG(TAG,
                 "Audio HTTP Media Source:\n"
                 "  Buffer Size: %zu bytes\n"
+                "  Persistent Ring Buffer: %s\n"
                 "  Decoder Task Stack in PSRAM: %s",
-                this->buffer_size_, YESNO(this->decoder_task_stack_in_psram_));
+                this->buffer_size_, YESNO(this->persistent_ring_buffer_), YESNO(this->decoder_task_stack_in_psram_));
 }
 
 void AudioHTTPMediaSource::setup() {
@@ -39,6 +40,7 @@ void AudioHTTPMediaSource::setup() {
 
   micro_decoder::DecoderConfig config;
   config.ring_buffer_size = this->buffer_size_;
+  config.persistent_ring_buffer = this->persistent_ring_buffer_;
   // Keep the transfer buffer smaller than the ring buffer so the reader can top up the ring
   // while the decoder is still draining it, instead of oscillating between empty and full.
   config.transfer_buffer_size = std::min(DEFAULT_TRANSFER_BUFFER_SIZE, this->buffer_size_ / 2);

esphome/components/audio_http/audio_http_media_source.h

@@ -33,6 +33,7 @@ class AudioHTTPMediaSource final : public Component,
 
   void set_buffer_size(size_t buffer_size) { this->buffer_size_ = buffer_size; }
   void set_task_stack_in_psram(bool task_stack_in_psram) { this->decoder_task_stack_in_psram_ = task_stack_in_psram; }
+  void set_persistent_ring_buffer(bool persistent) { this->persistent_ring_buffer_ = persistent; }
 
   // MediaSource interface implementation
   bool play_uri(const std::string &uri) override;
@@ -54,6 +55,7 @@ class AudioHTTPMediaSource final : public Component,
   // on_audio_write(). Must be atomic to avoid a data race.
   std::atomic<bool> pause_{false};
   bool decoder_task_stack_in_psram_{false};
+  bool persistent_ring_buffer_{false};
 };
 
 }  // namespace esphome::audio_http

esphome/components/audio_http/media_source.py

@@ -7,6 +7,8 @@ from esphome.types import ConfigType
 CODEOWNERS = ["@kahrendt"]
 AUTO_LOAD = ["audio"]
 
+CONF_PERSISTENT_RING_BUFFER = "persistent_ring_buffer"
+
 audio_http_ns = cg.esphome_ns.namespace("audio_http")
 AudioHTTPMediaSource = audio_http_ns.class_(
     "AudioHTTPMediaSource", cg.Component, media_source.MediaSource
@@ -28,6 +30,7 @@ CONFIG_SCHEMA = cv.All(
                 min=5000, max=1000000
             ),
             cv.Optional(CONF_TASK_STACK_IN_PSRAM): psram.validate_task_stack_in_psram,
+            cv.Optional(CONF_PERSISTENT_RING_BUFFER, default=False): cv.boolean,
         }
     )
     .extend(cv.COMPONENT_SCHEMA),
@@ -45,3 +48,4 @@ async def to_code(config: ConfigType) -> None:
         cg.add(var.set_task_stack_in_psram(True))
         psram.request_external_task_stack()
     cg.add(var.set_buffer_size(config[CONF_BUFFER_SIZE]))
+    cg.add(var.set_persistent_ring_buffer(config[CONF_PERSISTENT_RING_BUFFER]))

esphome/components/bluetooth_connection/bluetooth_connection_bluedroid.cpp

@@ -334,7 +334,7 @@ void BluedroidGattClient::set_disconnecting_() {
 
 esp_err_t BluedroidGattClient::update_conn_params_(uint16_t min_interval, uint16_t max_interval, uint16_t latency,
                                                    uint16_t timeout, const char *param_type) {
-  esp_ble_conn_update_params_t conn_params = {{0}};
+  esp_ble_conn_update_params_t conn_params = {};
   memcpy(conn_params.bda, this->remote_bda_, sizeof(esp_bd_addr_t));
   conn_params.min_int = min_interval;
   conn_params.max_int = max_interval;

esphome/components/climate/climate.cpp

@@ -551,7 +551,14 @@ ClimateCall ClimateDeviceRestoreState::to_call(Climate *climate) {
 
 void ClimateDeviceRestoreState::apply(Climate *climate) {
   auto traits = climate->get_traits();
-  climate->mode = this->mode;
+  // A saved mode the device no longer offers cannot be selected again, so skip it and leave the
+  // entity on the mode it already has. The other saved fields are still restored.
+  if (traits.supports_mode(this->mode)) {
+    climate->mode = this->mode;
+  } else {
+    ESP_LOGW(TAG, "'%s' - Saved mode %s is no longer supported, keeping %s", climate->get_name().c_str(),
+             LOG_STR_ARG(climate_mode_to_string(this->mode)), LOG_STR_ARG(climate_mode_to_string(climate->mode)));
+  }
   if (traits.has_feature_flags(CLIMATE_SUPPORTS_TWO_POINT_TARGET_TEMPERATURE |
                                CLIMATE_REQUIRES_TWO_POINT_TARGET_TEMPERATURE)) {
     climate->target_temperature_low = this->target_temperature_low;

esphome/components/climate_ir_lg/climate.py

@@ -13,9 +13,11 @@ CONF_HEADER_LOW = "header_low"
 CONF_BIT_HIGH = "bit_high"
 CONF_BIT_ONE_LOW = "bit_one_low"
 CONF_BIT_ZERO_LOW = "bit_zero_low"
+CONF_ADVANCED_COMMANDS_SUPPORT = "advanced_commands_support"
 
 CONFIG_SCHEMA = climate_ir.climate_ir_with_receiver_schema(LgIrClimate).extend(
     {
+        cv.Optional(CONF_ADVANCED_COMMANDS_SUPPORT, default=False): cv.boolean,
         cv.Optional(
             CONF_HEADER_HIGH, default="8000us"
         ): cv.positive_time_period_microseconds,
@@ -38,6 +40,7 @@ CONFIG_SCHEMA = climate_ir.climate_ir_with_receiver_schema(LgIrClimate).extend(
 async def to_code(config: ConfigType) -> None:
     var = await climate_ir.new_climate_ir(config)
 
+    cg.add(var.set_advanced_commands_support(config[CONF_ADVANCED_COMMANDS_SUPPORT]))
     cg.add(var.set_header_high(config[CONF_HEADER_HIGH]))
     cg.add(var.set_header_low(config[CONF_HEADER_LOW]))
     cg.add(var.set_bit_high(config[CONF_BIT_HIGH]))

esphome/components/climate_ir_lg/climate_ir_lg.cpp

@@ -5,11 +5,85 @@ namespace esphome::climate_ir_lg {
 
 static const char *const TAG = "climate.climate_ir_lg";
 
-// Commands
-const uint32_t COMMAND_MASK = 0xFF000;
-const uint32_t COMMAND_OFF = 0xC0000;
-const uint32_t COMMAND_SWING = 0x10000;
+// All codes provided here are missing the checksum (last 4 bits)
+// this checksum needs to be calculated before sending (look at `calc_checksum_()`)
 
+const uint32_t LG_HEADER = 0x8800000;
+
+// Commands
+const uint32_t COMMAND_HEADER_MASK = 0xFF000;
+const uint32_t COMMAND_DATA_MASK = 0x00FF0;
+const uint32_t CHECKSUM_MASK = 0xF;
+
+enum CommandBasic : uint32_t {
+  HEADER_BASIC = 0x10000,
+  BASIC_SWING_TOGGLE = 0x000,
+
+  // JET MODE (only for cooling/drying/heating modes)
+  // For 30 minutes: max airflow (stronger than F5 aka FAN_MAX) + PO (min/min/max temperature respectively)
+  // After 30 minutes: F5 aka FAN_MAX + min/min/max temperature respectively
+  BASIC_JET = 0x080,
+};
+
+enum CommandSys : uint32_t {
+  HEADER_SYS = 0xC0000,
+
+  COMMAND_OFF = 0x050,
+
+  // Also known as 'auto-dry'
+  AUTO_CLEAN_ON = 0x0B0,
+  AUTO_CLEAN_OFF = 0x0C0,
+
+  PURIFY_ON = 0x000,   // From either OFF or Mode -> Purify
+  PURIFY_OFF = 0x080,  // From Mode + Purify -> Mode
+
+  QUIET_OUTDOOR_ON = 0xA60,
+  QUIET_OUTDOOR_OFF = 0xA70,
+
+  // ENERGY CTRL (only in Cooling mode)
+  COOL_ENERG_CTRL_80 = 0x7D0,   // 80%
+  COOL_ENERG_CTRL_60 = 0x7E0,   // 60%
+  COOL_ENERG_CTRL_40 = 0x800,   // 40%
+  COOL_ENERG_CTRL_OFF = 0x7F0,  // OFF
+
+  DISPLAY_KW = 0x460,
+  LIGHT_ON_OFF = 0x0A0,
+
+  TEMP_UNIT_F = 0x170,
+  TEMP_UNIT_C = 0x160,
+};
+
+enum CommandAdvSwing : uint32_t {
+  HEADER_ADV_SWING = 0x13000,
+
+  // Only 5 bits are relevant, I got 0x13952 once - not sure what is the 8th bit so ignoring that.
+  ADV_SWING_DATA_MASK = 0x1F0,
+
+  // Commands for Advanced Vertical Control: Swing + 6 fixed positions
+  VERT_FIX_1 = 0x040,  // Down
+  VERT_FIX_2 = 0x050,
+  VERT_FIX_3 = 0x060,
+  VERT_FIX_4 = 0x070,
+  VERT_FIX_5 = 0x080,
+  VERT_FIX_6 = 0x090,      // Up
+  VERT_SWING_ON = 0x140,   // Swing between 1 and 6
+  VERT_SWING_OFF = 0x150,  // Stops immediately
+
+  // Commands for Advanced Horizontal Control: Swing (3 modes) + 5 fixed positions
+  HORI_FIX_1 = 0x0B0,  // Left
+  HORI_FIX_2 = 0x0C0,
+  HORI_FIX_3 = 0x0D0,
+  HORI_FIX_4 = 0x0E0,
+  HORI_FIX_5 = 0x0F0,           // Right
+  HORI_SWING_ON_LEFT = 0x100,   // Swing between 1 and 3
+  HORI_SWING_ON_RIGHT = 0x110,  // Swing between 3 and 5
+  HORI_SWING_ON_FULL = 0x160,   // Swing between 1 and 5
+  HORI_SWING_OFF = 0x170,       // Stops immediately
+};
+
+// Following commands contain mode, fan speed and temperature
+
+// Modes
 const uint32_t COMMAND_ON_COOL = 0x00000;
 const uint32_t COMMAND_ON_DRY = 0x01000;
 const uint32_t COMMAND_ON_FAN_ONLY = 0x02000;
@@ -23,11 +97,13 @@ const uint32_t COMMAND_AI = 0x0B000;
 const uint32_t COMMAND_HEAT = 0x0C000;
 
 // Fan speed
-const uint32_t FAN_MASK = 0xF0;
+const uint32_t FAN_SPEED_MASK = 0xF0;
 const uint32_t FAN_AUTO = 0x50;
-const uint32_t FAN_MIN = 0x00;
-const uint32_t FAN_MED = 0x20;
-const uint32_t FAN_MAX = 0x40;
+const uint32_t FAN_MIN = 0x00;  // AKA F1
+const uint32_t FAN_F2 = 0x90;
+const uint32_t FAN_MED = 0x20;  // AKA F3
+const uint32_t FAN_F4 = 0xA0;
+const uint32_t FAN_MAX = 0x40;  // AKA F5
 
 // Temperature
 const uint8_t TEMP_RANGE = TEMP_MAX - TEMP_MIN + 1;
@@ -37,16 +113,37 @@ const uint32_t TEMP_SHIFT = 8;
 const uint16_t BITS = 28;
 
 void LgIrClimate::transmit_state() {
-  uint32_t remote_state = 0x8800000;
+  uint32_t remote_state = LG_HEADER;
 
-  // ESP_LOGD(TAG, "climate_lg_ir mode_before_ code: 0x%02X", modeBefore_);
+  // ESP_LOGD(TAG, "climate_lg_ir mode_before_ code: 0x%02X", this->modeBefore_);
 
   // Set command
   if (this->send_swing_cmd_) {
     this->send_swing_cmd_ = false;
-    remote_state |= COMMAND_SWING;
-  } else {
-    bool climate_is_off = (this->mode_before_ == climate::CLIMATE_MODE_OFF);
+    if (this->advanced_commands_support_) {
+      switch (this->swing_mode) {
+        case climate::CLIMATE_SWING_VERTICAL:
+          ESP_LOGD(TAG, "setting swing vertical");
+          remote_state |= CommandAdvSwing::HEADER_ADV_SWING;
+          remote_state |= CommandAdvSwing::VERT_SWING_ON;
+          break;
+        case climate::CLIMATE_SWING_OFF:
+          ESP_LOGD(TAG, "setting swing off");
+          remote_state |= CommandAdvSwing::HEADER_ADV_SWING;
+          remote_state |= CommandAdvSwing::VERT_SWING_OFF;
+          break;
+        default:
+          return;
+      }
+      this->transmit_(remote_state);
+      this->publish_state();
+      return;
+    } else {  // just toggle swing when advanced_commands_support is not set
+      remote_state |= HEADER_BASIC;
+      remote_state |= BASIC_SWING_TOGGLE;
+    }
+  } else {  // Mode commands
+    const bool climate_is_off = (this->mode_before_ == climate::CLIMATE_MODE_OFF);
     switch (this->mode) {
       case climate::CLIMATE_MODE_COOL:
         remote_state |= climate_is_off ? COMMAND_ON_COOL : COMMAND_COOL;
@@ -65,8 +162,8 @@ void LgIrClimate::transmit_state() {
         break;
       case climate::CLIMATE_MODE_OFF:
       default:
-        remote_state |= COMMAND_OFF;
-        break;
+        remote_state |= CommandSys::HEADER_SYS;
+        remote_state |= CommandSys::COMMAND_OFF;
     }
   }
 
@@ -75,9 +172,8 @@ void LgIrClimate::transmit_state() {
   ESP_LOGD(TAG, "climate_lg_ir mode code: 0x%02X", this->mode);
 
   // Set fan speed
-  if (this->mode == climate::CLIMATE_MODE_OFF) {
-    remote_state |= FAN_AUTO;
-  } else {
+  if (this->mode !=
+      climate::CLIMATE_MODE_OFF) {  // https://github.com/esphome/esphome/pull/10875#issuecomment-5042765948
     switch (this->fan_mode.value_or(climate::CLIMATE_FAN_ON)) {
       case climate::CLIMATE_FAN_HIGH:
         remote_state |= FAN_MAX;
@@ -95,10 +191,20 @@ void LgIrClimate::transmit_state() {
     }
   }
 
-  // Set temperature
-  if (this->mode == climate::CLIMATE_MODE_COOL || this->mode == climate::CLIMATE_MODE_HEAT) {
-    auto temp = (uint8_t) roundf(clamp<float>(this->target_temperature, TEMP_MIN, TEMP_MAX));
-    remote_state |= ((temp - 15) << TEMP_SHIFT);
+  uint8_t temp;
+  switch (this->mode) {
+    case climate::CLIMATE_MODE_HEAT_COOL:
+      if (!this->advanced_commands_support_) {  // Keep previous behavior
+        break;
+      }
+      [[fallthrough]];
+    case climate::CLIMATE_MODE_COOL:
+    case climate::CLIMATE_MODE_HEAT:
+      temp = static_cast<uint8_t>(roundf(clamp<float>(this->target_temperature, TEMP_MIN, TEMP_MAX)));
+      remote_state |= (temp - 15) << TEMP_SHIFT;
+      break;
+    default:
+      break;
   }
 
   this->transmit_(remote_state);
@@ -124,62 +230,134 @@ bool LgIrClimate::on_receive(remote_base::RemoteReceiveData data) {
     }
   }
 
-  ESP_LOGD(TAG, "Decoded 0x%02" PRIX32, remote_state);
-  if ((remote_state & 0xFF00000) != 0x8800000)
+  ESP_LOGD(TAG, "Received 0x%02" PRIX32, remote_state);
+  if ((remote_state & 0xFF00000) != LG_HEADER)
     return false;
 
-  // Get command
-  if ((remote_state & COMMAND_MASK) == COMMAND_OFF) {
-    this->mode = climate::CLIMATE_MODE_OFF;
-  } else if ((remote_state & COMMAND_MASK) == COMMAND_SWING) {
-    this->swing_mode =
-        this->swing_mode == climate::CLIMATE_SWING_OFF ? climate::CLIMATE_SWING_VERTICAL : climate::CLIMATE_SWING_OFF;
-  } else {
-    switch (remote_state & COMMAND_MASK) {
-      case COMMAND_DRY:
-      case COMMAND_ON_DRY:
-        this->mode = climate::CLIMATE_MODE_DRY;
-        break;
-      case COMMAND_FAN_ONLY:
-      case COMMAND_ON_FAN_ONLY:
-        this->mode = climate::CLIMATE_MODE_FAN_ONLY;
-        break;
-      case COMMAND_AI:
-      case COMMAND_ON_AI:
-        this->mode = climate::CLIMATE_MODE_HEAT_COOL;
-        break;
-      case COMMAND_HEAT:
-      case COMMAND_ON_HEAT:
-        this->mode = climate::CLIMATE_MODE_HEAT;
-        break;
-      case COMMAND_COOL:
-      case COMMAND_ON_COOL:
-      default:
-        this->mode = climate::CLIMATE_MODE_COOL;
-        break;
-    }
-
-    // Get fan speed
-    if (this->mode == climate::CLIMATE_MODE_HEAT_COOL) {
-      this->fan_mode = climate::CLIMATE_FAN_AUTO;
-    } else if (this->mode == climate::CLIMATE_MODE_COOL || this->mode == climate::CLIMATE_MODE_DRY ||
-               this->mode == climate::CLIMATE_MODE_FAN_ONLY || this->mode == climate::CLIMATE_MODE_HEAT) {
-      if ((remote_state & FAN_MASK) == FAN_AUTO) {
-        this->fan_mode = climate::CLIMATE_FAN_AUTO;
-      } else if ((remote_state & FAN_MASK) == FAN_MIN) {
-        this->fan_mode = climate::CLIMATE_FAN_LOW;
-      } else if ((remote_state & FAN_MASK) == FAN_MED) {
-        this->fan_mode = climate::CLIMATE_FAN_MEDIUM;
-      } else if ((remote_state & FAN_MASK) == FAN_MAX) {
-        this->fan_mode = climate::CLIMATE_FAN_HIGH;
+  // Decode commands
+  switch (remote_state & COMMAND_HEADER_MASK) {
+    case CommandSys::HEADER_SYS:
+      ESP_LOGD(TAG, "Got system command! With data: 0x%02" PRIX32, remote_state & COMMAND_DATA_MASK);
+      if ((remote_state & COMMAND_DATA_MASK) == CommandSys::COMMAND_OFF) {
+        this->mode = climate::CLIMATE_MODE_OFF;
+      } else {
+        return false;
+      }
+      break;
+    case CommandAdvSwing::HEADER_ADV_SWING:
+      ESP_LOGD(TAG, "Got advanced swing command! With data: 0x%02" PRIX32,
+               remote_state & CommandAdvSwing::ADV_SWING_DATA_MASK);
+      switch (remote_state & CommandAdvSwing::ADV_SWING_DATA_MASK) {
+        case CommandAdvSwing::VERT_SWING_ON:
+          this->swing_mode = climate::CLIMATE_SWING_VERTICAL;
+          break;
+        case CommandAdvSwing::VERT_SWING_OFF:
+        case CommandAdvSwing::VERT_FIX_1:
+        case CommandAdvSwing::VERT_FIX_2:
+        case CommandAdvSwing::VERT_FIX_3:
+        case CommandAdvSwing::VERT_FIX_4:
+        case CommandAdvSwing::VERT_FIX_5:
+        case CommandAdvSwing::VERT_FIX_6:
+          this->swing_mode = climate::CLIMATE_SWING_OFF;
+          break;
+        default:
+          return false;  // Ignore all other (horizontal) swing commands
       }
-    }
 
-    // Get temperature
-    if (this->mode == climate::CLIMATE_MODE_COOL || this->mode == climate::CLIMATE_MODE_HEAT) {
-      this->target_temperature = ((remote_state & TEMP_MASK) >> TEMP_SHIFT) + 15;
-    }
+      this->publish_state();
+      return true;
+
+    case HEADER_BASIC:
+      if ((remote_state & COMMAND_DATA_MASK) == BASIC_JET) {
+        switch (this->mode) {
+          case climate::CLIMATE_MODE_COOL:
+          case climate::CLIMATE_MODE_HEAT:
+          case climate::CLIMATE_MODE_DRY:
+            this->target_temperature =
+                this->mode == climate::CLIMATE_MODE_HEAT ? this->maximum_temperature_ : this->minimum_temperature_;
+            this->fan_mode = climate::CLIMATE_FAN_HIGH;
+            // When enabling PO(WER) also known as JET mode, swing is set to VERT_3, but after 30 mins it will switch
+            // back to what it was before, so let's just not change it here it at all
+            this->publish_state();
+            return true;
+          default:
+            ESP_LOGD(TAG, "Got jet command, but current mode does not support it! Ignoring.");
+            return false;
+        }
+      }
+
+      // Keep previous behavior in case of other BASIC command
+      if (this->swing_mode == climate::CLIMATE_SWING_OFF) {  // Just flip between vertical and off
+        this->swing_mode = climate::CLIMATE_SWING_VERTICAL;
+      } else {
+        this->swing_mode = climate::CLIMATE_SWING_OFF;
+      }
+      this->publish_state();
+      return true;
+    // Following commands also contain fan speed and temperature, so no 'return' in these cases
+    case COMMAND_DRY:
+    case COMMAND_ON_DRY:
+      this->mode = climate::CLIMATE_MODE_DRY;
+      break;
+    case COMMAND_FAN_ONLY:
+    case COMMAND_ON_FAN_ONLY:
+      this->mode = climate::CLIMATE_MODE_FAN_ONLY;
+      break;
+    case COMMAND_AI:
+    case COMMAND_ON_AI:
+      this->mode = climate::CLIMATE_MODE_HEAT_COOL;
+      break;
+    case COMMAND_HEAT:
+    case COMMAND_ON_HEAT:
+      this->mode = climate::CLIMATE_MODE_HEAT;
+      break;
+    case COMMAND_COOL:
+    case COMMAND_ON_COOL:
+      this->mode = climate::CLIMATE_MODE_COOL;
+      break;
+    default:
+      ESP_LOGD(TAG, "Got unknown command! Ignoring!");
+      return false;
   }
+
+  // Decode fan speed
+  switch (remote_state & FAN_SPEED_MASK) {
+    case FAN_AUTO:
+      this->fan_mode = climate::CLIMATE_FAN_AUTO;
+      break;
+    case FAN_MIN:
+    case FAN_F2:
+      this->fan_mode = climate::CLIMATE_FAN_LOW;
+      break;
+    case FAN_MED:
+    case FAN_F4:
+      this->fan_mode = climate::CLIMATE_FAN_MEDIUM;
+      break;
+    case FAN_MAX:
+      this->fan_mode = climate::CLIMATE_FAN_HIGH;
+      break;
+    default:
+      ESP_LOGD(TAG, "Got unknown fan speed! Ignoring!");
+      return false;
+  }
+
+  // Keep previous behavior
+  if (this->mode == climate::CLIMATE_MODE_HEAT_COOL && !(this->advanced_commands_support_)) {
+    this->fan_mode = climate::CLIMATE_FAN_AUTO;
+  }
+
+  // Decode temperature for modes that support it
+  switch (this->mode) {
+    case climate::CLIMATE_MODE_HEAT_COOL:
+    case climate::CLIMATE_MODE_COOL:
+    case climate::CLIMATE_MODE_HEAT:
+      this->target_temperature = ((remote_state & TEMP_MASK) >> TEMP_SHIFT) + 15;
+      break;
+    default:
+      break;
+  }
+
+  this->mode_before_ = this->mode;
   this->publish_state();
 
   return true;
@@ -207,14 +385,14 @@ void LgIrClimate::transmit_(uint32_t value) {
   data->mark(this->bit_high_);
   transmit.perform();
 }
+
 void LgIrClimate::calc_checksum_(uint32_t &value) {
-  uint32_t mask = 0xF;
   uint32_t sum = 0;
   for (uint8_t i = 1; i < 8; i++) {
-    sum += (value & (mask << (i * 4))) >> (i * 4);
+    sum += (value & (CHECKSUM_MASK << (i * 4))) >> (i * 4);
   }
 
-  value |= (sum & mask);
+  value |= (sum & CHECKSUM_MASK);
 }
 
 }  // namespace esphome::climate_ir_lg

esphome/components/climate_ir_lg/climate_ir_lg.h

@@ -21,12 +21,13 @@ class LgIrClimate final : public climate_ir::ClimateIR {
   /// Override control to change settings of the climate device.
   void control(const climate::ClimateCall &call) override {
     this->send_swing_cmd_ = call.get_swing_mode().has_value();
-    // swing resets after unit powered off
+    // swing resets after unit powered off, except when advanced_commands_support_ is set
     auto mode = call.get_mode();
-    if (mode.has_value() && *mode == climate::CLIMATE_MODE_OFF)
+    if (mode.has_value() && *mode == climate::CLIMATE_MODE_OFF && !(this->advanced_commands_support_))
       this->swing_mode = climate::CLIMATE_SWING_OFF;
     climate_ir::ClimateIR::control(call);
   }
+  void set_advanced_commands_support(bool value) { this->advanced_commands_support_ = value; }
   void set_header_high(uint32_t header_high) { this->header_high_ = header_high; }
   void set_header_low(uint32_t header_low) { this->header_low_ = header_low; }
   void set_bit_high(uint32_t bit_high) { this->bit_high_ = bit_high; }
@@ -44,6 +45,7 @@ class LgIrClimate final : public climate_ir::ClimateIR {
   void calc_checksum_(uint32_t &value);
   void transmit_(uint32_t value);
 
+  bool advanced_commands_support_{false};
   uint32_t header_high_;
   uint32_t header_low_;
   uint32_t bit_high_;

esphome/components/dashboard_import/__init__.py

@@ -4,7 +4,6 @@ import re
 import secrets
 from typing import Any
 
-import requests
 from ruamel.yaml import YAML
 
 from esphome import git
@@ -13,7 +12,7 @@ from esphome.components.packages import validate_source_shorthand
 import esphome.config_validation as cv
 from esphome.const import CONF_ESPHOME, CONF_PROJECT, CONF_REF, CONF_WIFI
 import esphome.final_validate as fv
-from esphome.happy_eyeballs import ensure_happy_eyeballs
+from esphome.net_retry import fetch_with_retry, http_request
 from esphome.types import ConfigType
 from esphome.yaml_util import dump
 
@@ -111,14 +110,20 @@ def import_config(
 
     if git_file.query and "full_config" in git_file.query:
         url = git_file.raw_url
-        try:
-            ensure_happy_eyeballs()
-            req = requests.get(url, timeout=30)
+
+        # Deferred so config-time imports of this component stay light;
+        # http_request does the lazy import for the request itself.
+        import requests
+
+        def _fetch() -> str:
+            req = http_request("GET", url, timeout=30)
             req.raise_for_status()
+            return req.text
+
+        try:
+            contents = fetch_with_retry(url, _fetch, what="Import")
         except requests.exceptions.RequestException as e:
             raise ValueError(f"Error while fetching {url}: {e}") from e
-
-        contents = req.text
         yaml = YAML()
         loaded_yaml = yaml.load(contents)
         if (

esphome/components/emontx/__init__.py

@@ -116,14 +116,16 @@ _CALLBACK_AUTOMATIONS = (
 
 async def to_code(config: ConfigType) -> None:
     var = cg.new_Pvariable(config[CONF_ID])
-    await cg.register_component(var, config)
-    await uart.register_uart_device(var, config)
 
-    # Initialize sensor storage with count from final_validate
+    # Initialize sensor storage with count from final_validate before any
+    # await, so platform to_code() calls always see it initialized
+    # regardless of YAML key order.
     sensor_count = _get_data().sensor_counts.get(str(config[CONF_ID]), 0)
     if sensor_count > 0:
         cg.add(var.init_sensors(sensor_count))
 
+    await cg.register_component(var, config)
+    await uart.register_uart_device(var, config)
     await automation.build_callback_automations(var, config, _CALLBACK_AUTOMATIONS)
 
 

esphome/components/emontx/sensor/__init__.py

@@ -7,8 +7,10 @@ from esphome.const import (
     CONF_ID,
     CONF_STATE_CLASS,
     CONF_UNIT_OF_MEASUREMENT,
+    DEVICE_CLASS_APPARENT_POWER,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_ENERGY,
+    DEVICE_CLASS_FREQUENCY,
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_POWER_FACTOR,
     DEVICE_CLASS_TEMPERATURE,
@@ -18,8 +20,10 @@ from esphome.const import (
     UNIT_AMPERE,
     UNIT_CELSIUS,
     UNIT_EMPTY,
+    UNIT_HERTZ,
     UNIT_PULSES,
     UNIT_VOLT,
+    UNIT_VOLT_AMPS,
     UNIT_WATT,
     UNIT_WATT_HOURS,
 )
@@ -29,6 +33,32 @@ from .. import CONF_EMONTX_ID, CONF_TAG_NAME, EmonTx, emontx_ns
 
 EmonTxSensor = emontx_ns.class_("EmonTxSensor", sensor.Sensor, cg.Component)
 
+# Known emonTx/avrdb JSON tag conventions, gathered from real firmware
+# (see https://github.com/openenergymonitor/avrdb_firmware), used to decide
+# whether each tag below requires a numeric index or may also appear bare:
+#
+#   Tag family    Bare (no index)          Numeric-indexed
+#   -----------   -----------------------  ----------------------------------
+#   P (power)     no                       P1, P2, ... (multi-channel boards)
+#   E (energy)    no                       E1, E2, ...
+#   V (voltage)   Vrms (NOT matched here,  V1, V2, V3 (per-phase boards)
+#                 doesn't fit "V"+digits)
+#   I (current)   no                       I1, I2, ...
+#   T (temp.)     no                       T1, T2, ...
+#   F (frequency) F (single mains freq.)   not seen indexed
+#   PULSE         pulse (single-CT boards) PULSE1, PULSE2, ... (other variants)
+#   PF (power     not seen bare            PF1, PF2, ... (currently unused/
+#     factor)                              commented out in avrdb firmware)
+#   AP (apparent  not seen bare            AP1, AP2, ... (not an avrdb tag at
+#     power)                               all; avrdb uses "VA"+index instead,
+#                                           itself currently unused/commented
+#                                           out; "AP" is kept here for other
+#                                           firmware/integrations using it)
+#
+# This is why a bare "PULSE" resolves to proper defaults below, but bare
+# "PF"/"AP" fall back to generic defaults instead: only PULSE has a
+# confirmed bare-tag use in real, currently-shipping firmware.
+
 # Define sensor type configurations by prefix
 SENSOR_CONFIGS = {
     "P": {
@@ -63,7 +93,25 @@ SENSOR_CONFIGS = {
     },
 }
 
-# Pattern-based configurations
+# Tags reported once, without a numeric index (e.g. "F"), matched exactly
+# rather than by prefix.
+EXACT_TAG_CONFIGS = {
+    "F": {
+        CONF_UNIT_OF_MEASUREMENT: UNIT_HERTZ,
+        CONF_DEVICE_CLASS: DEVICE_CLASS_FREQUENCY,
+        CONF_STATE_CLASS: STATE_CLASS_MEASUREMENT,
+        CONF_ACCURACY_DECIMALS: 2,
+    },
+}
+
+# Pattern-based configurations. The remainder after the prefix must be a
+# non-empty numeric index (like V1/I1/E1), so e.g. "APPLE" doesn't collide
+# with the "AP" prefix and a bare "PF"/"AP" (no index) doesn't match.
+# "PULSE" is the exception: some emonTx firmware (e.g. avrdb-based single-CT
+# variants) reports a single pulse counter as a bare "pulse" tag with no
+# numeric index at all, so that pattern also accepts an empty suffix.
+PATTERNS_ALLOWING_BARE_TAG = {"PULSE"}
+
 PATTERN_CONFIGS = {
     "PULSE": {
         CONF_UNIT_OF_MEASUREMENT: UNIT_PULSES,
@@ -77,14 +125,21 @@ PATTERN_CONFIGS = {
         CONF_STATE_CLASS: STATE_CLASS_MEASUREMENT,
         CONF_ACCURACY_DECIMALS: 2,
     },
+    "AP": {
+        CONF_UNIT_OF_MEASUREMENT: UNIT_VOLT_AMPS,
+        CONF_DEVICE_CLASS: DEVICE_CLASS_APPARENT_POWER,
+        CONF_STATE_CLASS: STATE_CLASS_MEASUREMENT,
+        CONF_ACCURACY_DECIMALS: 2,
+    },
 }
 
 # BASE_SCHEMA intentionally omits state_class and accuracy_decimals defaults.
 # Passing them to sensor_schema() would register them via cv.Optional(key, default=...),
 # making them always present in the validated config dict and preventing
 # apply_tag_defaults from overriding them with the correct per-prefix values.
-# They are injected by apply_tag_defaults below, after running through
-# sensor.validate_state_class() so the value is code-generation-ready.
+# They are injected by apply_tag_defaults below, after running through the
+# same validators sensor_schema() would use (see _DEFAULT_VALIDATORS) so the
+# values are code-generation-ready.
 BASE_SCHEMA = sensor.sensor_schema(EmonTxSensor).extend(
     {
         cv.GenerateID(CONF_EMONTX_ID): cv.use_id(EmonTx),
@@ -93,30 +148,43 @@ BASE_SCHEMA = sensor.sensor_schema(EmonTxSensor).extend(
 )
 
 
+_DEFAULT_VALIDATORS = {
+    CONF_STATE_CLASS: sensor.validate_state_class,
+    CONF_DEVICE_CLASS: sensor.validate_device_class,
+    CONF_UNIT_OF_MEASUREMENT: sensor.validate_unit_of_measurement,
+}
+
+
 def _apply_defaults(config: ConfigType, defaults: dict) -> None:
     """Inject defaults into config, skipping keys already set by the user.
-    state_class values are run through validate_state_class so they are
-    code-generation-ready, matching what sensor_schema() would normally do."""
+    Values are run through the same validators sensor_schema() would use, so
+    they are code-generation-ready and a typo'd constant fails validation
+    instead of shipping silently."""
     for key, value in defaults.items():
         if key not in config:
-            if key == CONF_STATE_CLASS:
-                value = sensor.validate_state_class(value)
+            if key in _DEFAULT_VALIDATORS:
+                value = _DEFAULT_VALIDATORS[key](value)
             config[key] = value
 
 
 def apply_tag_defaults(config: ConfigType) -> ConfigType:
     """Apply defaults based on tag prefix if applicable, but don't restrict any tags."""
     tag = config[CONF_TAG_NAME]
+    tag_upper = tag.upper()
 
+    if (exact_config := EXACT_TAG_CONFIGS.get(tag_upper)) is not None:
+        _apply_defaults(config, exact_config)
+        return config
+
+    for pattern, pattern_config in PATTERN_CONFIGS.items():
+        suffix = tag_upper[len(pattern) :]
+        bare_ok = not suffix and pattern in PATTERNS_ALLOWING_BARE_TAG
+        if tag_upper.startswith(pattern) and (suffix.isdigit() or bare_ok):
+            _apply_defaults(config, pattern_config)
+            return config
+
+    # Only apply defaults for known prefixes with numeric indices (e.g. E1, V2, T3)
     if len(tag) >= 2:
-        tag_upper = tag.upper()
-
-        for pattern, pattern_config in PATTERN_CONFIGS.items():
-            if tag_upper.startswith(pattern):
-                _apply_defaults(config, pattern_config)
-                return config
-
-        # Only apply defaults for known prefixes with numeric indices (e.g. E1, V2, T3)
         prefix = tag_upper[0]
         if prefix in SENSOR_CONFIGS and tag[1:].isdigit():
             _apply_defaults(config, SENSOR_CONFIGS[prefix])

esphome/components/esp32/__init__.py

@@ -65,6 +65,7 @@ from .boards import BOARDS, STANDARD_BOARDS
 from .const import (
     KEY_ARDUINO_LIBRARIES,
     KEY_BOARD,
+    KEY_CERT_BUNDLE,
     KEY_COMPONENTS,
     KEY_ESP32,
     KEY_EXCLUDE_COMPONENTS,
@@ -237,6 +238,7 @@ DEFAULT_EXCLUDED_IDF_COMPONENTS = (
     "esp_gdbstub",  # GDB stub panic handler - unused by ESPHome; bt pulls it back
     "esp_hid",  # HID host/device support - ESPHome doesn't implement HID functionality
     "esp_http_client",  # HTTP client - only needed by http_request component
+    "esp_http_server",  # HTTP server - re-included by web_server_idf, esp32_camera_web_server
     "esp_https_ota",  # ESP-IDF HTTPS OTA - ESPHome has its own OTA implementation
     "esp_https_server",  # HTTPS server - ESPHome has its own web server
     "esp_lcd",  # LCD controller drivers - only needed by display component
@@ -245,6 +247,7 @@ DEFAULT_EXCLUDED_IDF_COMPONENTS = (
     "fatfs",  # FAT filesystem - ESPHome doesn't use filesystem storage
     "json",  # cJSON library - ESPHome uses ArduinoJson instead
     "mqtt",  # ESP-IDF MQTT library - ESPHome has its own MQTT implementation
+    "nvs_sec_provider",  # NVS encryption key provider - re-included when CONFIG_NVS_ENCRYPTION is set
     "openthread",  # Thread protocol - only needed by openthread component
     "perfmon",  # Xtensa performance monitor - ESPHome has its own debug component
     "protobuf-c",  # Protobuf runtime - only used by provisioning components (also excluded)
@@ -343,6 +346,10 @@ ARDUINO_LIBRARY_IDF_COMPONENTS: dict[str, tuple[str, ...]] = {
     "Zigbee": ("espressif__esp-zigbee-lib", "espressif__esp-zboss-lib"),
 }
 
+# Arduino libraries whose sources reference esp_crt_bundle_attach without a
+# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE guard, so enabling them needs the bundle.
+ARDUINO_LIBRARIES_NEEDING_CERT_BUNDLE = frozenset({"NetworkClientSecure"})
+
 # Arduino library to Arduino library dependencies
 # When enabling one library, also enable its dependencies
 # Kconfig "select" statements don't work with CONFIG_ARDUINO_SELECTIVE_COMPILATION
@@ -644,6 +651,27 @@ class RawSdkconfigValue:
 SdkconfigValueType = bool | int | HexInt | str | RawSdkconfigValue
 
 
+def is_idf_sdkconfig_option_enabled(name: str) -> bool:
+    """Return True when a bool sdkconfig option resolves to ``y``.
+
+    Handles both the ``True`` a component sets and the raw ``y`` a user sets
+    in ``sdkconfig_options``.
+    """
+    value = CORE.data[KEY_ESP32][KEY_SDKCONFIG_OPTIONS].get(name)
+    return value is not None and _format_sdkconfig_val(value) == "y"
+
+
+def set_idf_sdkconfig_default(name: str, value: SdkconfigValueType) -> None:
+    """Set an sdkconfig option unless it is already set.
+
+    For the FINAL priority reconcile jobs: they run after every to_code,
+    including the user's sdkconfig_options, and must not override an
+    existing value.
+    """
+    if name not in CORE.data[KEY_ESP32][KEY_SDKCONFIG_OPTIONS]:
+        add_idf_sdkconfig_option(name, value)
+
+
 def add_idf_sdkconfig_option(name: str, value: SdkconfigValueType):
     """Set an esp-idf sdkconfig value."""
     CORE.data[KEY_ESP32][KEY_SDKCONFIG_OPTIONS][name] = value
@@ -788,6 +816,10 @@ def _enable_arduino_library(name: str) -> None:
     # Also enable any required IDF components
     for idf_component in ARDUINO_LIBRARY_IDF_COMPONENTS.get(name, ()):
         include_builtin_idf_component(idf_component)
+    if not ARDUINO_LIBRARIES_NEEDING_CERT_BUNDLE.isdisjoint(
+        {name, *ARDUINO_LIBRARY_DEPENDENCIES.get(name, ())}
+    ):
+        require_certificate_bundle()
 
 
 def add_extra_script(stage: str, filename: str, path: Path):
@@ -822,6 +854,10 @@ def _format_framework_pio_espidf_version(
 ) -> str:
     # format the given espidf (https://github.com/pioarduino/esp-idf/releases) version to
     # a PIO platformio/framework-espidf value
+    # TEMP: pioarduino has no 6.1 package yet; pioarduino-style repack of
+    # espressif v6.1. Remove before merge.
+    if ver == cv.Version(6, 1, 0):
+        return "pioarduino/framework-espidf@https://github.com/bdraco/esp-idf/releases/download/v6.1.0/esp-idf-v6.1.0.tar.xz"
     if ver == cv.Version(5, 4, 3) or ver >= cv.Version(5, 5, 1):
         ext = "tar.xz"
     else:
@@ -912,12 +948,19 @@ ARDUINO_IDF_VERSION_LOOKUP = {
 # The default/recommended esp-idf framework version
 #  - https://github.com/espressif/esp-idf/releases
 ESP_IDF_FRAMEWORK_VERSION_LOOKUP = {
-    "recommended": cv.Version(5, 5, 5),
-    "latest": cv.Version(5, 5, 5),
-    "dev": cv.Version(5, 5, 5),
+    # TEMP: default to 6.1.0 for CI testing of Log V2; revert to 5.5.5 before merge
+    "recommended": cv.Version(6, 1, 0),
+    "latest": cv.Version(6, 1, 0),
+    "dev": cv.Version(6, 1, 0),
 }
 
 ESP_IDF_PLATFORM_VERSION_LOOKUP = {
+    # TEMP: prep_IDF6 plus the IDF 6.1 fixes (deps, bootloader ld, --wrap,
+    # tf-psa sublibs); only 6.1 has the Log V2 defines. Remove with the 6.1
+    # default once pioarduino publishes 6.1 support.
+    cv.Version(
+        6, 1, 0
+    ): "https://github.com/bdraco/platform-espressif32.git#idf61-test",
     cv.Version(
         6, 0, 1
     ): "https://github.com/pioarduino/platform-espressif32.git#prep_IDF6",
@@ -1013,6 +1056,14 @@ def _check_pio_versions(config: ConfigType) -> ConfigType:
 
     version = _resolve_framework_version(value)
 
+    # TEMP: named versions take the platform from PLATFORM_VERSION_LOOKUP
+    # above, bypassing the per-IDF-version lookup; force the IDF 6 platform
+    # without disturbing Arduino (still on 5.5.5). Remove with the 6.1 default.
+    if value[CONF_TYPE] != FRAMEWORK_ARDUINO and version == cv.Version(6, 1, 0):
+        value[CONF_PLATFORM_VERSION] = _parse_pio_platform_version(
+            ESP_IDF_PLATFORM_VERSION_LOOKUP[version]
+        )
+
     if value[CONF_TYPE] == FRAMEWORK_ARDUINO:
         platform_lookup = ARDUINO_PLATFORM_VERSION_LOOKUP.get(version)
         value[CONF_SOURCE] = value.get(
@@ -1073,19 +1124,11 @@ def _check_esp_idf_versions(config: ConfigType) -> ConfigType:
     return config
 
 
-def _validate_toolchain(value) -> Toolchain:
-    return Toolchain(
-        cv.one_of(Toolchain.PLATFORMIO, Toolchain.ESP_IDF, lower=True)(value)
-    )
-
-
-def _resolve_toolchain(value: ConfigType) -> ConfigType:
-    # Resolve toolchain: CLI (already on CORE.toolchain) > YAML > default.
-    # Runs before _detect_variant so downstream validators can rely on
-    # CORE.toolchain instead of re-resolving it from the config dict.
-    if CORE.toolchain is None:
-        CORE.toolchain = value.get(CONF_TOOLCHAIN, Toolchain.ESP_IDF)
-    return value
+_TOOLCHAINS = (Toolchain.PLATFORMIO, Toolchain.ESP_IDF)
+_validate_toolchain = cv.toolchain_enum(_TOOLCHAINS)
+# Runs before _detect_variant so downstream validators can rely on
+# CORE.toolchain instead of re-resolving it from the config dict.
+_resolve_toolchain = cv.resolve_toolchain("ESP32", _TOOLCHAINS, Toolchain.ESP_IDF)
 
 
 def _check_versions(config: ConfigType) -> ConfigType:
@@ -1735,6 +1778,16 @@ def require_vfs_termios() -> None:
     CORE.data[KEY_VFS_TERMIOS_REQUIRED] = True
 
 
+def require_certificate_bundle() -> None:
+    """Enable the mbedTLS root certificate bundle for this build.
+
+    The bundle is off by default; components that verify TLS server
+    certificates (http_request, audio streaming) call this so the bundle is
+    compiled and gen_crt_bundle runs only when something uses it.
+    """
+    CORE.data[KEY_ESP32][KEY_CERT_BUNDLE] = True
+
+
 def require_full_certificate_bundle() -> None:
     """Request the full certificate bundle instead of the common-CAs-only bundle.
 
@@ -1744,6 +1797,7 @@ def require_full_certificate_bundle() -> None:
 
     Call this from components that need to connect to services using uncommon CAs.
     """
+    require_certificate_bundle()
     CORE.data[KEY_ESP32][KEY_FULL_CERT_BUNDLE] = True
 
 
@@ -2160,6 +2214,10 @@ def register_exclude_components_cmake_arg() -> None:
 @coroutine_with_priority(CoroPriority.FINAL)
 async def _write_exclude_components() -> None:
     """Write EXCLUDE_COMPONENTS cmake arg after all components have registered exclusions."""
+    # NVS encryption needs nvs_sec_provider however it was enabled: the
+    # nvs_encryption option, raw sdkconfig_options or another component.
+    if is_idf_sdkconfig_option_enabled("CONFIG_NVS_ENCRYPTION"):
+        include_builtin_idf_component("nvs_sec_provider")
     register_exclude_components_cmake_arg()
 
 
@@ -2218,6 +2276,31 @@ async def _set_libc_picolibc_newlib_compat() -> None:
     )
 
 
+@coroutine_with_priority(CoroPriority.FINAL)
+async def _reconcile_certificate_bundle_sdkconfig() -> None:
+    """Enable the mbedTLS certificate bundle only when something asked for it.
+
+    Runs at FINAL priority so every require_certificate_bundle() call has
+    happened. Without a request the bundle is disabled, which skips
+    esp_crt_bundle.c, the gen_crt_bundle step and the x509_crt_bundle.S embed.
+    A user-supplied sdkconfig_options value takes precedence.
+    """
+    data = CORE.data[KEY_ESP32]
+    enabled = data.get(KEY_CERT_BUNDLE, False)
+    set_idf_sdkconfig_default("CONFIG_MBEDTLS_CERTIFICATE_BUNDLE", enabled)
+    if not enabled:
+        return
+    # Use CMN (common CAs) bundle by default to save ~51KB flash
+    # CMN covers CAs with >1% market share (~99% of websites)
+    # Components needing uncommon CAs can call require_full_certificate_bundle()
+    use_full_bundle = data.get(KEY_FULL_CERT_BUNDLE, False)
+    set_idf_sdkconfig_default(
+        "CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL", use_full_bundle
+    )
+    if not use_full_bundle:
+        set_idf_sdkconfig_default("CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN", True)
+
+
 @coroutine_with_priority(CoroPriority.FINAL)
 async def _reconcile_network_sdkconfig() -> None:
     """Reconcile WiFi/Ethernet/Bluetooth/coexistence sdkconfig flags.
@@ -2229,37 +2312,31 @@ async def _reconcile_network_sdkconfig() -> None:
     always takes precedence.
     """
     net = CORE.data[KEY_ESP32].get(KEY_NETWORK_SDKCONFIG, NetworkSdkconfigData())
-    opts = CORE.data[KEY_ESP32][KEY_SDKCONFIG_OPTIONS]
     is_arduino = CORE.using_arduino
 
-    def set_opt(name: str, value: SdkconfigValueType) -> None:
-        # User sdkconfig_options (applied during to_code) win.
-        if name not in opts:
-            add_idf_sdkconfig_option(name, value)
-
     # Bluetooth: only ever enable when requested. The IDF default is off.
     # According to the IDF docs, only one of 4.2 or 5.0 should be enabled.
     if net.bluetooth:
-        set_opt("CONFIG_BT_ENABLED", True)
-        set_opt("CONFIG_BT_BLE_42_FEATURES_SUPPORTED", True)
-        set_opt("CONFIG_BT_BLE_50_FEATURES_SUPPORTED", False)
+        set_idf_sdkconfig_default("CONFIG_BT_ENABLED", True)
+        set_idf_sdkconfig_default("CONFIG_BT_BLE_42_FEATURES_SUPPORTED", True)
+        set_idf_sdkconfig_default("CONFIG_BT_BLE_50_FEATURES_SUPPORTED", False)
 
     # WiFi stack: disable only when Ethernet is present and WiFi is not. WiFi
     # relies on the IDF default (enabled), so it is never written True here.
     wifi_disabled = net.ethernet and not net.wifi
     if wifi_disabled:
-        set_opt("CONFIG_ESP_WIFI_ENABLED", False)
+        set_idf_sdkconfig_default("CONFIG_ESP_WIFI_ENABLED", False)
 
     # Software coexistence: enable when requested (the schema only allows it
     # alongside WiFi). Disable only in the Ethernet-without-WiFi case.
     if net.software_coexistence:
-        set_opt("CONFIG_SW_COEXIST_ENABLE", True)
+        set_idf_sdkconfig_default("CONFIG_SW_COEXIST_ENABLE", True)
     elif wifi_disabled:
-        set_opt("CONFIG_SW_COEXIST_ENABLE", False)
+        set_idf_sdkconfig_default("CONFIG_SW_COEXIST_ENABLE", False)
 
     # SoftAP support: drop it when WiFi is used without AP mode (IDF only).
     if not is_arduino and net.wifi and not net.wifi_ap:
-        set_opt("CONFIG_ESP_WIFI_SOFTAP_SUPPORT", False)
+        set_idf_sdkconfig_default("CONFIG_ESP_WIFI_SOFTAP_SUPPORT", False)
 
     # LWIP DHCP server: a WiFi-AP-mode / enable_lwip_dhcp_server concern (not
     # coexistence). Disable when WiFi has no AP (IDF) or the enable_lwip_dhcp_server
@@ -2270,7 +2347,7 @@ async def _reconcile_network_sdkconfig() -> None:
     if (
         wifi_wants_dhcps_off or dhcp_server_disabled_by_option
     ) and not arduino_eth_exclusion:
-        set_opt("CONFIG_LWIP_DHCPS", False)
+        set_idf_sdkconfig_default("CONFIG_LWIP_DHCPS", False)
 
 
 @coroutine_with_priority(CoroPriority.FINAL)
@@ -2295,29 +2372,24 @@ async def _reconcile_vfs_fatfs_sdkconfig(
     """Reconcile VFS/FATFS sdkconfig flags after all require_*() calls; user sdkconfig_options win."""
     opts = CORE.data[KEY_ESP32][KEY_SDKCONFIG_OPTIONS]
 
-    def set_opt(name: str, value: SdkconfigValueType) -> None:
-        # User sdkconfig_options (applied during to_code) win.
-        if name not in opts:
-            add_idf_sdkconfig_option(name, value)
-
     # USB Serial JTAG VFS needs termios (require_vfs_termios(), e.g. logger). ~1.8KB flash when off.
     if CORE.data.get(KEY_VFS_TERMIOS_REQUIRED, False):
-        set_opt("CONFIG_VFS_SUPPORT_TERMIOS", True)
+        set_idf_sdkconfig_default("CONFIG_VFS_SUPPORT_TERMIOS", True)
     else:
-        set_opt("CONFIG_VFS_SUPPORT_TERMIOS", not disable_vfs_termios)
+        set_idf_sdkconfig_default("CONFIG_VFS_SUPPORT_TERMIOS", not disable_vfs_termios)
 
     # VFS select is only needed for UART/eventfd fds (require_vfs_select(), e.g. openthread);
     # sockets use lwip_select() either way. ~2.7KB flash when off.
     if CORE.data.get(KEY_VFS_SELECT_REQUIRED, False):
-        set_opt("CONFIG_VFS_SUPPORT_SELECT", True)
+        set_idf_sdkconfig_default("CONFIG_VFS_SUPPORT_SELECT", True)
     else:
-        set_opt("CONFIG_VFS_SUPPORT_SELECT", not disable_vfs_select)
+        set_idf_sdkconfig_default("CONFIG_VFS_SUPPORT_SELECT", not disable_vfs_select)
 
     # Directory functions: opendir/readdir/mkdir etc. (require_vfs_dir()). ~0.5KB flash when off.
     if CORE.data.get(KEY_VFS_DIR_REQUIRED, False):
-        set_opt("CONFIG_VFS_SUPPORT_DIR", True)
+        set_idf_sdkconfig_default("CONFIG_VFS_SUPPORT_DIR", True)
     else:
-        set_opt("CONFIG_VFS_SUPPORT_DIR", not disable_vfs_dir)
+        set_idf_sdkconfig_default("CONFIG_VFS_SUPPORT_DIR", not disable_vfs_dir)
 
     # FATFS (require_fatfs()): LFN + one volume per esp_vfs_fat mount. Defaults only;
     # sdkconfig_options override. FATFS_LONG_FILENAMES is a Kconfig choice -- if the user set
@@ -2330,15 +2402,15 @@ async def _reconcile_vfs_fatfs_sdkconfig(
     user_picked_lfn = any(k in opts for k in lfn_keys)
     if CORE.data[KEY_ESP32].get(KEY_FATFS_REQUIRED, False):
         if not user_picked_lfn:
-            set_opt("CONFIG_FATFS_LFN_NONE", False)
-            set_opt("CONFIG_FATFS_LFN_HEAP", True)
-            set_opt("CONFIG_FATFS_MAX_LFN", 255)
-        set_opt("CONFIG_FATFS_VOLUME_COUNT", 4)
+            set_idf_sdkconfig_default("CONFIG_FATFS_LFN_NONE", False)
+            set_idf_sdkconfig_default("CONFIG_FATFS_LFN_HEAP", True)
+            set_idf_sdkconfig_default("CONFIG_FATFS_MAX_LFN", 255)
+        set_idf_sdkconfig_default("CONFIG_FATFS_VOLUME_COUNT", 4)
     elif disable_fatfs:
         if not user_picked_lfn:
-            set_opt("CONFIG_FATFS_LFN_NONE", True)
+            set_idf_sdkconfig_default("CONFIG_FATFS_LFN_NONE", True)
         # Kconfig range is [1,10]; 0 gets clamped to the default.
-        set_opt("CONFIG_FATFS_VOLUME_COUNT", 1)
+        set_idf_sdkconfig_default("CONFIG_FATFS_VOLUME_COUNT", 1)
 
 
 @coroutine_with_priority(CoroPriority.FINAL - 1)
@@ -2525,21 +2597,11 @@ async def to_code(config):
         )
 
         add_idf_sdkconfig_option("CONFIG_MBEDTLS_PSK_MODES", True)
-        add_idf_sdkconfig_option("CONFIG_MBEDTLS_CERTIFICATE_BUNDLE", True)
 
     cg.add_build_flag("-Wno-nonnull-compare")
 
-    # Use CMN (common CAs) bundle by default to save ~51KB flash
-    # CMN covers CAs with >1% market share (~99% of websites)
-    # Components needing uncommon CAs can call require_full_certificate_bundle()
-    use_full_bundle = conf[CONF_ADVANCED].get(
-        CONF_USE_FULL_CERTIFICATE_BUNDLE, False
-    ) or CORE.data[KEY_ESP32].get(KEY_FULL_CERT_BUNDLE, False)
-    add_idf_sdkconfig_option(
-        "CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL", use_full_bundle
-    )
-    if not use_full_bundle:
-        add_idf_sdkconfig_option("CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN", True)
+    if conf[CONF_ADVANCED].get(CONF_USE_FULL_CERTIFICATE_BUNDLE, False):
+        require_full_certificate_bundle()
 
     add_idf_sdkconfig_option(f"CONFIG_IDF_TARGET_{variant}", True)
     add_idf_sdkconfig_option(
@@ -2929,6 +2991,9 @@ async def to_code(config):
     # FINAL priority: runs after every network/coexistence request_*() call
     CORE.add_job(_reconcile_network_sdkconfig)
 
+    # FINAL priority: runs after every require_certificate_bundle() call
+    CORE.add_job(_reconcile_certificate_bundle_sdkconfig)
+
     # FINAL: require_*() calls can come from to_code at or below this priority, so an
     # inline read would be iteration-order-dependent; reconcile once after every job ran.
     CORE.add_job(
@@ -2956,6 +3021,10 @@ async def to_code(config):
 
     for name, value in conf[CONF_SDKCONFIG_OPTIONS].items():
         add_idf_sdkconfig_option(name, RawSdkconfigValue(value))
+    # A bundle forced on through sdkconfig_options is a request like any other,
+    # so it still gets the CMN variant pinned.
+    if conf[CONF_SDKCONFIG_OPTIONS].get("CONFIG_MBEDTLS_CERTIFICATE_BUNDLE") == "y":
+        require_certificate_bundle()
 
     # Components from YAML are added in a separate coroutine with FINAL priority
     # Schedule it to run after all other components

esphome/components/esp32/const.py

@@ -27,6 +27,7 @@ KEY_REFRESH = "refresh"
 KEY_PATH = "path"
 KEY_SUBMODULES = "submodules"
 KEY_EXTRA_BUILD_FILES = "extra_build_files"
+KEY_CERT_BUNDLE = "cert_bundle"
 KEY_FULL_CERT_BUNDLE = "full_cert_bundle"
 KEY_NETWORK_SDKCONFIG = "network_sdkconfig"
 

esphome/components/esp32/core.cpp

@@ -2,6 +2,7 @@
 
 #include "esphome/core/application.h"
 #include "esphome/core/defines.h"
+#include "esphome/core/helpers.h"
 #include "preferences.h"
 #include <freertos/FreeRTOS.h>
 #include <freertos/task.h>
@@ -29,6 +30,13 @@ void loop_task(void *pv_params) {
 }
 
 extern "C" void app_main() {
+  // Apply the custom eFuse MAC (if burned and valid) as the base MAC before any
+  // interface (Wi-Fi, Ethernet, Bluetooth, 802.15.4) derives its address from it.
+  // The logger does not exist yet, so only log-free helpers may be used here.
+  uint8_t mac[MAC_ADDRESS_SIZE];
+  if (get_custom_mac_address(mac)) {
+    set_mac_address(mac);
+  }
   initArduino();
   esp32::setup_preferences();
 #if CONFIG_FREERTOS_UNICORE

esphome/components/esp32/helpers.cpp

@@ -71,23 +71,32 @@ static bool read_valid_mac(uint8_t *mac, esp_err_t err) { return err == ESP_OK &
 
 static constexpr size_t MAC_ADDRESS_SIZE_BITS = MAC_ADDRESS_SIZE * 8;  // 48 bits
 
+// Must not use the ESPHome logger (may run before it exists, e.g. from app_main()).
+bool get_custom_mac_address(uint8_t *mac) {
+  // has_custom_mac_address() checks the raw eFuse field, while the reads below select their
+  // method differently and may still fail (CRC), so the result must be validated again.
+  if (!has_custom_mac_address())
+    return false;
+#if defined(CONFIG_SOC_IEEE802154_SUPPORTED)
+  return read_valid_mac(mac, esp_efuse_read_field_blob(ESP_EFUSE_MAC_CUSTOM, mac, MAC_ADDRESS_SIZE_BITS));
+#else
+  return read_valid_mac(mac, esp_efuse_mac_get_custom(mac));
+#endif
+}
+
 void get_mac_address_raw(uint8_t *mac) {  // NOLINT(readability-non-const-parameter)
+  if (get_custom_mac_address(mac)) {
+    return;
+  }
 #if defined(CONFIG_SOC_IEEE802154_SUPPORTED)
   // When CONFIG_SOC_IEEE802154_SUPPORTED is defined, esp_efuse_mac_get_default
   // returns the 802.15.4 EUI-64 address, so we read directly from eFuse instead.
-  // Both paths already read raw eFuse bytes, so there is no CRC-bypass fallback
+  // This already reads raw eFuse bytes, so there is no CRC-bypass fallback
   // (unlike the non-IEEE802154 path where esp_efuse_mac_get_default does CRC checks).
-  if (has_custom_mac_address() &&
-      read_valid_mac(mac, esp_efuse_read_field_blob(ESP_EFUSE_MAC_CUSTOM, mac, MAC_ADDRESS_SIZE_BITS))) {
-    return;
-  }
   if (read_valid_mac(mac, esp_efuse_read_field_blob(ESP_EFUSE_MAC_FACTORY, mac, MAC_ADDRESS_SIZE_BITS))) {
     return;
   }
 #else
-  if (has_custom_mac_address() && read_valid_mac(mac, esp_efuse_mac_get_custom(mac))) {
-    return;
-  }
   if (read_valid_mac(mac, esp_efuse_mac_get_default(mac))) {
     return;
   }

esphome/components/esp32_ble_client/ble_client_base.cpp

@@ -267,7 +267,7 @@ void BLEClientBase::log_warning_(const char *message) {
 
 esp_err_t BLEClientBase::update_conn_params_(uint16_t min_interval, uint16_t max_interval, uint16_t latency,
                                              uint16_t timeout, const char *param_type) {
-  esp_ble_conn_update_params_t conn_params = {{0}};
+  esp_ble_conn_update_params_t conn_params = {};
   memcpy(conn_params.bda, this->remote_bda_, sizeof(esp_bd_addr_t));
   conn_params.min_int = min_interval;
   conn_params.max_int = max_interval;

esphome/components/esp32_ble_tracker/__init__.py

@@ -143,6 +143,13 @@ def validate_max_connections_deprecated(config: ConfigType) -> ConfigType:
 # BLE uses the airtime wifi does not claim.
 IDF_SCAN_WINDOW_FIX_VERSION = cv.Version(5, 5, 5)
 
+# Above this the scanner holds the shared radio long enough that wifi drops
+# packets and connections on some access points (others cope fine, which is
+# why this is a warning and not an error); old proxy configs with 1100 ms
+# windows are a recurring cause of instability (esphome/esphome#18655). Only
+# wifi shares the radio; long windows are fine on ethernet builds.
+MAX_RECOMMENDED_WIFI_SCAN_WINDOW = TimePeriod(milliseconds=600)
+
 
 @dataclass
 class TrackerData:
@@ -209,6 +216,45 @@ def _raise_defaulted_scan_window(config: ConfigType) -> ConfigType:
     return config
 
 
+def _warn_long_scan_window_with_wifi(config: ConfigType) -> ConfigType:
+    """Warn when the scan window is long enough to starve wifi.
+
+    Runs after _raise_defaulted_scan_window so it sees the final window.
+    software_coexistence is only present when wifi is configured, so ethernet
+    builds never warn: BLE has the radio to itself there. Presence is what
+    matters, not the value; with the arbiter disabled a long window starves
+    wifi outright.
+    """
+    params = config[CONF_SCAN_PARAMETERS]
+    window = params[CONF_WINDOW]
+    if CONF_SOFTWARE_COEXISTENCE not in config:
+        return config
+    if window <= MAX_RECOMMENDED_WIFI_SCAN_WINDOW:
+        return config
+    if _get_data().scan_window_defaulted:
+        # The window was raised to match the interval, so point at the key the
+        # user actually set.
+        _LOGGER.warning(
+            "BLE scan interval of %s sets the scan window to the same value, "
+            "which starves wifi on the same radio and can cause wifi disconnects "
+            "depending on the access point; keep the interval at or below %s "
+            "(for example interval: 320ms). Long windows are only a problem with "
+            "wifi, they are fine on ethernet",
+            params[CONF_INTERVAL],
+            MAX_RECOMMENDED_WIFI_SCAN_WINDOW,
+        )
+        return config
+    _LOGGER.warning(
+        "BLE scan window of %s with wifi on the same radio starves wifi and "
+        "can cause wifi disconnects depending on the access point; keep the "
+        "window at or below %s (for example interval: 320ms, window: 300ms). "
+        "Long windows are only a problem with wifi, they are fine on ethernet",
+        window,
+        MAX_RECOMMENDED_WIFI_SCAN_WINDOW,
+    )
+    return config
+
+
 # 320 ms is the ESP-IDF reference scan interval; the shared schema also
 # tightens validation to the controller's 2.5 ms .. 10240 ms range and rejects
 # window/interval pairs that collapse to the same 0.625 ms unit count.
@@ -271,6 +317,7 @@ CONFIG_SCHEMA = cv.All(
     ).extend(cv.COMPONENT_SCHEMA),
     validate_max_connections_deprecated,
     _raise_defaulted_scan_window,
+    _warn_long_scan_window_with_wifi,
 )
 
 

esphome/components/esp32_camera_web_server/__init__.py

@@ -1,4 +1,5 @@
 import esphome.codegen as cg
+from esphome.components.esp32 import include_builtin_idf_component
 import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_MODE, CONF_PORT
 from esphome.types import ConfigType
@@ -35,6 +36,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Required(CONF_MODE): cv.enum(MODES, upper=True),
         },
     ).extend(cv.COMPONENT_SCHEMA),
+    cv.only_on_esp32,
     _consume_camera_web_server_sockets,
 )
 
@@ -44,3 +46,5 @@ async def to_code(config: ConfigType) -> None:
     cg.add(server.set_port(config[CONF_PORT]))
     cg.add(server.set_mode(config[CONF_MODE]))
     await cg.register_component(server, config)
+    # esp_http_server is excluded from IDF builds by default to save compile time
+    include_builtin_idf_component("esp_http_server")

esphome/components/esp8266/__init__.py

@@ -35,7 +35,7 @@ from esphome.platformio.toolchain import copy_ccache_script
 from esphome.storage_json import StorageJSON
 from esphome.types import ConfigType
 
-from .boards import BOARDS, ESP8266_LD_SCRIPTS
+from .boards import BOARDS, ESP8266_LD_SCRIPTS, board_ld_script
 from .const import (
     CONF_EARLY_PIN_INIT,
     CONF_ENABLE_SERIAL,
@@ -44,6 +44,7 @@ from .const import (
     KEY_BOARD,
     KEY_ESP8266,
     KEY_FLASH_SIZE,
+    KEY_LDSCRIPT,
     KEY_PIN_INITIAL_STATES,
     KEY_SERIAL1_REQUIRED,
     KEY_SERIAL_REQUIRED,
@@ -136,7 +137,16 @@ def _format_framework_arduino_version(ver: cv.Version) -> str:
         return f"~1.{ver.major}{ver.minor:02d}{ver.patch:02d}.0"
     if ver <= cv.Version(2, 6, 2):
         return f"~2.{ver.major}{ver.minor:02d}{ver.patch:02d}.0"
-    return f"~3.{ver.major}{ver.minor:02d}{ver.patch:02d}.0"
+    # Same encoding the native toolchain uses for its package download, so a
+    # version bump cannot drift between the two paths.
+    from esphome.arduino8266.framework import framework_package_version
+
+    try:
+        return f"~{framework_package_version(ver)}"
+    except EsphomeError as err:
+        # Anchor the 4.x rejection to the framework version line instead of
+        # aborting with a bare traceback-level error
+        raise cv.Invalid(str(err), path=[CONF_VERSION]) from err
 
 
 # NOTE: Keep this in mind when updating the recommended version:
@@ -246,6 +256,9 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_ENABLE_SCANF_FLOAT): cv.boolean,
         }
     ),
+    # Until the native toolchain lands, PlatformIO is the only backend;
+    # reject a --toolchain this platform cannot serve yet.
+    cv.require_platformio_toolchain("ESP8266"),
     set_core_data,
 )
 
@@ -276,6 +289,31 @@ def check_rosetta() -> None:
         )
 
 
+def _choose_ld_script(board: str, ver: cv.Version) -> str | None:
+    """The flash ld to pin for this board and core, or None for cores
+    without ld-script support."""
+    board_data = BOARDS[board]
+    ld_scripts = ESP8266_LD_SCRIPTS[board_data[KEY_FLASH_SIZE]]
+    if ver <= cv.Version(2, 3, 0):
+        # No ld script support
+        return None
+    if ver <= cv.Version(2, 4, 2):
+        # Old ld script path; the modern per-board override names do not
+        # exist in this core's SDK, so the override cannot be honored.
+        # Substituting the size default would move _FS_end and the
+        # preferences sector, wiping flash-backed state on flash.
+        if KEY_LDSCRIPT in board_data:
+            raise EsphomeError(
+                f"Board {board} requires its {board_data[KEY_LDSCRIPT]} "
+                f"flash layout, which Arduino core {ver} cannot honor; "
+                "use a core newer than 2.4.2"
+            )
+        return ld_scripts[0]
+    # A per-board override preserves a layout the board shipped with
+    # (see d1_wroom_02 in boards.py)
+    return board_ld_script(board_data)
+
+
 @coroutine_with_priority(CoroPriority.PLATFORM)
 async def to_code(config: ConfigType) -> None:
     cg.add(esp8266_ns.setup_preferences())
@@ -397,17 +435,7 @@ async def to_code(config: ConfigType) -> None:
     )
 
     if config[CONF_BOARD] in BOARDS:
-        flash_size = BOARDS[config[CONF_BOARD]][KEY_FLASH_SIZE]
-        ld_scripts = ESP8266_LD_SCRIPTS[flash_size]
-
-        if ver <= cv.Version(2, 3, 0):
-            # No ld script support
-            ld_script = None
-        elif ver <= cv.Version(2, 4, 2):
-            # Old ld script path
-            ld_script = ld_scripts[0]
-        else:
-            ld_script = ld_scripts[1]
+        ld_script = _choose_ld_script(config[CONF_BOARD], ver)
 
         if ld_script is not None:
             cg.add_platformio_option("board_build.ldscript", ld_script)

esphome/components/esp8266/boards.py

@@ -1,3 +1,5 @@
+from .const import KEY_FLASH_SIZE, KEY_LDSCRIPT
+
 FLASH_SIZE_1_MB = 2**20
 FLASH_SIZE_512_KB = FLASH_SIZE_1_MB // 2
 FLASH_SIZE_2_MB = 2 * FLASH_SIZE_1_MB
@@ -164,7 +166,8 @@ ESP8266_BOARD_PINS = {
 }
 
 """
-BOARDS generate with:
+BOARDS generate with (preserve per-board KEY_LDSCRIPT overrides such as
+d1_wroom_02; the recipe emits only name/flash_size):
 
 git clone https://github.com/platformio/platform-espressif8266
 for x in platform-espressif8266/boards/*.json; do
@@ -182,6 +185,19 @@ for x in platform-espressif8266/boards/*.json; do
 done | sort
 """
 
+
+def board_ld_script(board_data: dict) -> str:
+    """The modern (core > 2.4.2) flash linker script for a board: its
+    shipped-layout override, else the size default (the no-FS layout).
+
+    Single source of truth for the PlatformIO pinning in __init__ and the
+    native generator's fallback, so the per-board rule cannot drift.
+    """
+    return board_data.get(
+        KEY_LDSCRIPT, ESP8266_LD_SCRIPTS[board_data[KEY_FLASH_SIZE]][1]
+    )
+
+
 BOARDS = {
     "agruminolemon": {
         "name": "Lifely Agrumino Lemon v4",
@@ -199,6 +215,15 @@ BOARDS = {
         "name": "WeMos D1 mini Pro",
         "flash_size": FLASH_SIZE_16_MB,
     },
+    "d1_wroom_02": {
+        "name": "WeMos D1 ESP-WROOM-02",
+        "flash_size": FLASH_SIZE_2_MB,
+        # This board joined BOARDS after shipping with the manifest default
+        # (64 KB filesystem region); the flash-size default (2m.ld) would
+        # move _FS_end and with it the preferences sector, wiping existing
+        # devices' flash-backed state on update.
+        KEY_LDSCRIPT: "eagle.flash.2m64.ld",
+    },
     "d1": {
         "name": "WEMOS D1 R1",
         "flash_size": FLASH_SIZE_4_MB,
@@ -360,3 +385,112 @@ BOARDS = {
         "flash_size": FLASH_SIZE_4_MB,
     },
 }
+
+
+# Per-board variant dir + identity defines from platform-espressif8266 4.x
+# build.extra_flags; the shared -DESP8266/-DARDUINO_ARCH_ESP8266 are added
+# by the generator.
+#
+# Regenerate ESP8266_BOARD_BUILD with (v4.2.1 is the platform version the
+# native toolchain mirrors; regenerate against the tag when bumping it):
+#
+# git clone -b v4.2.1 https://github.com/platformio/platform-espressif8266
+# python3 - <<'EOF'
+# import json, glob, os
+# for f in sorted(glob.glob("platform-espressif8266/boards/*.json")):
+#     b = json.load(open(f))["build"]
+#     extra = b["extra_flags"]
+#     extra = extra.split() if isinstance(extra, str) else extra
+#     defines = [
+#         e[2:] for e in extra if e not in ("-DESP8266", "-DARDUINO_ARCH_ESP8266")
+#     ]
+#     entries = ", ".join(f'"{d}"' for d in defines) + ("," if len(defines) == 1 else "")
+#     board = os.path.splitext(os.path.basename(f))[0]
+#     print(f'    "{board}": {{"variant": "{b["variant"]}", "defines": ({entries})}},')
+# EOF
+ESP8266_BOARD_BUILD = {
+    "agruminolemon": {
+        "variant": "agruminolemonv4",
+        "defines": ("ARDUINO_ESP8266_AGRUMINO_LEMON_V4",),
+    },
+    "d1": {"variant": "d1", "defines": ("ARDUINO_ESP8266_WEMOS_D1R1",)},
+    "d1_mini": {"variant": "d1_mini", "defines": ("ARDUINO_ESP8266_WEMOS_D1MINI",)},
+    "d1_mini_lite": {
+        "variant": "d1_mini",
+        "defines": ("ARDUINO_ESP8266_WEMOS_D1MINILITE",),
+    },
+    "d1_mini_pro": {
+        "variant": "d1_mini",
+        "defines": ("ARDUINO_ESP8266_WEMOS_D1MINIPRO",),
+    },
+    "d1_wroom_02": {
+        "variant": "d1_mini",
+        "defines": ("ARDUINO_ESP8266_WEMOS_D1WROOM02",),
+    },
+    "eduinowifi": {
+        "variant": "eduinowifi",
+        "defines": ("ARDUINO_ESP8266_SCHIRMILABS_EDUINO_WIFI",),
+    },
+    "esp01": {"variant": "generic", "defines": ("ARDUINO_ESP8266_ESP01",)},
+    "esp01_1m": {"variant": "generic", "defines": ("ARDUINO_ESP8266_ESP01",)},
+    "esp07": {"variant": "generic", "defines": ("ARDUINO_ESP8266_ESP07",)},
+    "esp07s": {"variant": "nodemcu", "defines": ("ARDUINO_ESP8266_ESP07",)},
+    "esp12e": {"variant": "nodemcu", "defines": ("ARDUINO_ESP8266_ESP12",)},
+    "esp210": {"variant": "generic", "defines": ("ARDUINO_ESP8266_ESP210",)},
+    "esp8285": {"variant": "esp8285", "defines": ("ARDUINO_ESP8266_ESP01",)},
+    "esp_wroom_02": {
+        "variant": "nodemcu",
+        "defines": ("ARDUINO_ESP8266_ESP_WROOM_02",),
+    },
+    "espduino": {"variant": "ESPDuino", "defines": ("ARDUINO_ESP8266_ESP13",)},
+    "espectro": {"variant": "espectro", "defines": ("ARDUINO_ESP8266_ESPECTRO_CORE",)},
+    "espino": {"variant": "espino", "defines": ("ARDUINO_ESP8266_ESP12",)},
+    "espinotee": {"variant": "espinotee", "defines": ("ARDUINO_ESP8266_ESP13",)},
+    "espmxdevkit": {
+        "variant": "esp8285",
+        "defines": ("ARDUINO_ESP8266_ESP01", "LED_BUILTIN=16"),
+    },
+    "espresso_lite_v1": {
+        "variant": "espresso_lite_v1",
+        "defines": ("ARDUINO_ESP8266_ESPRESSO_LITE_V1",),
+    },
+    "espresso_lite_v2": {
+        "variant": "espresso_lite_v2",
+        "defines": ("ARDUINO_ESP8266_ESPRESSO_LITE_V2",),
+    },
+    "gen4iod": {"variant": "generic", "defines": ("ARDUINO_GEN4_IOD",)},
+    "heltec_wifi_kit_8": {
+        "variant": "wifi_kit_8",
+        "defines": ("ARDUINO_wifi_kit_8",),
+    },
+    "huzzah": {"variant": "adafruit", "defines": ("ARDUINO_ESP8266_ADAFRUIT_HUZZAH",)},
+    "inventone": {"variant": "inventone", "defines": ("ARDUINO_ESP8266_INVENT_ONE",)},
+    "modwifi": {"variant": "generic", "defines": ("ARDUINO_MOD_WIFI_ESP8266",)},
+    "nodemcu": {"variant": "nodemcu", "defines": ("ARDUINO_ESP8266_NODEMCU",)},
+    "nodemcuv2": {"variant": "nodemcu", "defines": ("ARDUINO_ESP8266_NODEMCU_ESP12E",)},
+    "oak": {"variant": "oak", "defines": ("ARDUINO_ESP8266_OAK",)},
+    "phoenix_v1": {
+        "variant": "phoenix_v1",
+        "defines": ("ARDUINO_ESP8266_PHOENIX_V1",),
+    },
+    "phoenix_v2": {
+        "variant": "phoenix_v2",
+        "defines": ("ARDUINO_ESP8266_PHOENIX_V2",),
+    },
+    "sonoff_basic": {"variant": "itead", "defines": ("ARDUINO_ESP8266_SONOFF_BASIC",)},
+    "sonoff_s20": {"variant": "itead", "defines": ("ARDUINO_ESP8266_SONOFF_S20",)},
+    "sonoff_sv": {"variant": "itead", "defines": ("ARDUINO_ESP8266_SONOFF_SV",)},
+    "sonoff_th": {"variant": "itead", "defines": ("ARDUINO_ESP8266_SONOFF_TH",)},
+    "sparkfunBlynk": {"variant": "thing", "defines": ("ARDUINO_ESP8266_THING",)},
+    "thing": {"variant": "thing", "defines": ("ARDUINO_ESP8266_THING",)},
+    "thingdev": {"variant": "thing", "defines": ("ARDUINO_ESP8266_THING_DEV",)},
+    "wifi_slot": {"variant": "wifi_slot", "defines": ("ARDUINO_AMPERKA_WIFI_SLOT",)},
+    "wifiduino": {"variant": "wifiduino", "defines": ("ARDUINO_WIFIDUINO_ESP8266",)},
+    "wifinfo": {"variant": "wifinfo", "defines": ("ARDUINO_WIFINFO",)},
+    "wio_link": {"variant": "wiolink", "defines": ("ARDUINO_ESP8266_WIO_LINK",)},
+    "wio_node": {"variant": "nodemcu", "defines": ("ARDUINO_ESP8266_ESP_WROOM_02",)},
+    "xinabox_cw01": {
+        "variant": "xinabox",
+        "defines": ("ARDUINO_ESP8266_XINABOX_CW01",),
+    },
+}

esphome/components/esp8266/build_surgery.py

@@ -0,0 +1,123 @@
+"""Linker-script surgery shared with the native (PlatformIO-free) toolchain.
+
+These mirror the PlatformIO extra scripts in this directory
+(``relocate_ratetable.py.script`` and ``testing_mode.py.script``), which run
+inside SCons and must stay self-contained. The native build generator applies
+the same patches to the linker scripts it generates, so the logic lives here
+as plain functions. Keep both in sync when changing either.
+``segment_length`` is native-toolchain-only and has no script twin.
+"""
+
+from __future__ import annotations
+
+from collections.abc import Collection
+import hashlib
+import re
+
+# Move the NONOS SDK wifi rate tables from flash to DRAM; see
+# relocate_ratetable.py.script for the full background (NONOS SDK issue 320).
+RATETABLE_RULE = "*libnet80211.a:ieee80211_phy.o(.irom.text .irom.text.*)"
+_RATETABLE_COMMENT = (
+    "/* ESPHome: wifi rate tables must live in DRAM, see NONOS SDK issue 320 */"
+)
+# Match the whole line: "_data_start" is also a substring of the
+# "_dport0_data_start" line in the earlier .dport0.data section
+_RATETABLE_ANCHOR = re.compile(r"^\s*_data_start = ABSOLUTE\(\.\);", re.MULTILINE)
+
+# Memory sizes for testing mode (allow larger builds for CI component grouping)
+TESTING_IRAM_SIZE = "0x200000"  # 2MB
+TESTING_DRAM_SIZE = "0x200000"  # 2MB
+TESTING_FLASH_SIZE = "0x2000000"  # 32MB
+
+
+def relocate_ratetable(content: str) -> str:
+    """Insert the rate-table DRAM rule into a generated common linker script."""
+    if RATETABLE_RULE in content:
+        return content
+    match = _RATETABLE_ANCHOR.search(content)
+    if match is None:
+        raise RuntimeError(
+            "'_data_start' anchor not found in the generated linker script; "
+            "cannot apply wifi rate table DRAM relocation "
+            "(has the Arduino core linker script changed?)"
+        )
+    insert_pos = match.end()
+    return (
+        content[:insert_pos]
+        + f"\n    {_RATETABLE_COMMENT}"
+        + f"\n    {RATETABLE_RULE}"
+        + content[insert_pos:]
+    )
+
+
+_TESTING_SEGMENT_SIZES = {
+    "iram1_0_seg": TESTING_IRAM_SIZE,
+    "dram0_0_seg": TESTING_DRAM_SIZE,
+    "irom0_0_seg": TESTING_FLASH_SIZE,
+}
+
+
+def _segment_line_re(segment_name: str) -> re.Pattern[str]:
+    """The MEMORY line for one segment: ``<seg> : org = 0x..., len = 0x...``.
+
+    Anchored to the start of the line so a name never matches inside a
+    longer one (``ram0_0_seg`` must not read ``dram0_0_seg``). The size
+    group stops at the hex digits, leaving any ``ul`` suffix (from the
+    preprocessed ``MMU_IRAM_SIZE``) in place.
+    """
+    return re.compile(
+        rf"(^[ \t]*{re.escape(segment_name)}"
+        r"\s*:\s*org\s*=\s*0x[0-9a-fA-F]+\s*,\s*len\s*=\s*)"
+        r"(0x[0-9a-fA-F]+)",
+        re.MULTILINE,
+    )
+
+
+def apply_testing_memory_patches(content: str, segments: Collection[str]) -> str:
+    """Enlarge the named memory segments so grouped CI test builds can link.
+
+    Each caller passes the segments its linker script defines: the
+    generated common ld carries ``iram1_0_seg``; the flash ld carries
+    ``dram0_0_seg`` and ``irom0_0_seg``. A segment that fails to match
+    raises, since a silently kept real memory limit would fail grouped
+    builds far from the cause.
+    """
+    for segment in _TESTING_SEGMENT_SIZES:
+        if segment not in segments and _segment_line_re(segment).search(content):
+            raise RuntimeError(
+                f"Testing-mode segment {segment} is present in the linker "
+                "script but was not selected for patching"
+            )
+    for segment in segments:
+        if segment not in _TESTING_SEGMENT_SIZES:
+            raise RuntimeError(f"Unknown testing-mode segment {segment!r}")
+        content, count = _segment_line_re(segment).subn(
+            rf"\g<1>{_TESTING_SEGMENT_SIZES[segment]}", content
+        )
+        if count == 0:
+            raise RuntimeError(
+                f"Testing-mode memory patch failed: segment {segment} "
+                "not found (has the Arduino core linker script changed?)"
+            )
+    return content
+
+
+def segment_length(content: str, segment_name: str) -> int | None:
+    """Read a memory segment's length from linker script content.
+
+    Returns None for an absent segment OR an unparsable line; callers must
+    treat None as "no usable budget" and warn (as the Flash summary does),
+    never as "no limit".
+    """
+    match = _segment_line_re(segment_name).search(content)
+    return int(match.group(2), 16) if match else None
+
+
+def surgery_fingerprint() -> str:
+    """Hash of this module's source; linker-script caches include it so an
+    edit here invalidates them."""
+    import inspect
+    import sys
+
+    source = inspect.getsource(sys.modules[__name__])
+    return hashlib.sha256(source.encode()).hexdigest()

esphome/components/esp8266/const.py

@@ -15,6 +15,11 @@ CONF_ENABLE_SERIAL1 = "enable_serial1"
 KEY_WAVEFORM_REQUIRED = "waveform_required"
 KEY_SERIAL_REQUIRED = "serial_required"
 KEY_SERIAL1_REQUIRED = "serial1_required"
+# Set for the native (non-PlatformIO) toolchain's build generator
+KEY_FLASH_MODE = "flash_mode"
+KEY_SCANF_FLOAT = "scanf_float"
+# Per-board flash-layout override consumed by board_ld_script()
+KEY_LDSCRIPT = "ldscript"
 
 # esp8266 namespace is already defined by arduino, manually prefix esphome
 esp8266_ns = cg.global_ns.namespace("esphome").namespace("esp8266")

esphome/components/ethernet/__init__.py

@@ -4,6 +4,7 @@ import logging
 from esphome import automation, pins
 from esphome.automation import Condition
 import esphome.codegen as cg
+from esphome.components import spi
 from esphome.components.network import (
     add_use_address,
     get_network_priority,
@@ -39,6 +40,7 @@ from esphome.const import (
     CONF_POLLING_INTERVAL,
     CONF_RESET_PIN,
     CONF_SPI,
+    CONF_SPI_ID,
     CONF_STATIC_IP,
     CONF_SUBNET,
     CONF_TYPE,
@@ -263,10 +265,42 @@ def _is_framework_spi_polling_mode_supported() -> bool:
     return False
 
 
+# Options that come from the referenced spi bus when spi_id is set
+_SPI_BUS_PROVIDED_OPTIONS = (
+    CONF_CLK_PIN,
+    CONF_MOSI_PIN,
+    CONF_MISO_PIN,
+    CONF_INTERFACE,
+)
+
+
+def _validate_spi_bus(config: ConfigType) -> ConfigType:
+    """Cross-validate spi_id against the options the referenced bus provides."""
+    if CONF_SPI_ID in config:
+        for key in _SPI_BUS_PROVIDED_OPTIONS:
+            if key in config:
+                raise cv.Invalid(
+                    f"'{key}' cannot be used together with '{CONF_SPI_ID}'; "
+                    f"it comes from the referenced 'spi:' bus.",
+                    path=[key],
+                )
+    else:
+        for key in (CONF_CLK_PIN, CONF_MOSI_PIN, CONF_MISO_PIN):
+            if key not in config:
+                raise cv.Invalid(
+                    f"'{key}' is a required option when '{CONF_SPI_ID}' is not set.",
+                    path=[key],
+                )
+    return config
+
+
 def _validate_spi_interface(config: ConfigType) -> ConfigType:
     """Set default SPI interface or validate user choice against the variant."""
     if not CORE.is_esp32:
         return config
+    if CONF_SPI_ID in config:
+        # The interface comes from the referenced spi bus; don't set a default.
+        return config
     from esphome.components.esp32 import VARIANT_ESP32, get_esp32_variant
     from esphome.components.spi import get_hw_interface_list
 
@@ -451,9 +485,14 @@ def _spi_schema(default_clock: str = "26.67MHz", max_clock: int = int(80e6)) ->
         BASE_SCHEMA.extend(
             cv.Schema(
                 {
-                    cv.Required(CONF_CLK_PIN): pins.internal_gpio_output_pin_number,
-                    cv.Required(CONF_MISO_PIN): pins.internal_gpio_input_pin_number,
-                    cv.Required(CONF_MOSI_PIN): pins.internal_gpio_output_pin_number,
+                    # clk/mosi/miso are required unless spi_id is set; enforced
+                    # by _validate_spi_bus below.
+                    cv.Optional(CONF_CLK_PIN): pins.internal_gpio_output_pin_number,
+                    cv.Optional(CONF_MISO_PIN): pins.internal_gpio_input_pin_number,
+                    cv.Optional(CONF_MOSI_PIN): pins.internal_gpio_output_pin_number,
+                    cv.Optional(CONF_SPI_ID): cv.All(
+                        cv.only_on_esp32, cv.use_id(spi.SPIComponent)
+                    ),
                     cv.Required(CONF_CS_PIN): pins.internal_gpio_output_pin_number,
                     cv.Optional(
                         CONF_INTERRUPT_PIN
@@ -478,6 +517,7 @@ def _spi_schema(default_clock: str = "26.67MHz", max_clock: int = int(80e6)) ->
             ),
         ),
         cv.only_on([Platform.ESP32, Platform.RP2]),
+        _validate_spi_bus,
         _validate_spi_interface,
     )
 
@@ -529,6 +569,30 @@ def _final_validate_spi(config: ConfigType) -> None:
         return
     from esphome.components.spi import CONF_INTERFACE_INDEX, get_spi_interface
 
+    if CONF_SPI_ID in config:
+        # Sharing the bus: the standard spi device schema enforces that the
+        # referenced bus declares both data lines. The IDF ethernet drivers
+        # additionally need a hardware host, which shows as an interface index
+        # on the validated bus config.
+        spi.final_validate_device_schema(
+            "ethernet", require_mosi=True, require_miso=True
+        )(config)
+        cv.Schema(
+            {
+                cv.Required(CONF_SPI_ID): fv.id_declaration_match_schema(
+                    {
+                        cv.Required(
+                            CONF_INTERFACE_INDEX,
+                            msg="Component ethernet requires this spi bus to use "
+                            "a hardware interface",
+                        ): cv.valid
+                    }
+                )
+            },
+            extra=cv.ALLOW_EXTRA,
+        )(config)
+        return
+
     if spi_configs := fv.full_config.get().get(CONF_SPI):
         # get_spi_interface() returns strings like "SPI2_HOST"
         spi_host = f"{config[CONF_INTERFACE].upper()}_HOST"
@@ -625,9 +689,15 @@ async def _to_code_esp32(var: cg.MockObj, config: ConfigType) -> None:
     )
 
     if config[CONF_TYPE] in SPI_ETHERNET_TYPES:
-        cg.add(var.set_clk_pin(config[CONF_CLK_PIN]))
-        cg.add(var.set_miso_pin(config[CONF_MISO_PIN]))
-        cg.add(var.set_mosi_pin(config[CONF_MOSI_PIN]))
+        if (spi_id := config.get(CONF_SPI_ID)) is not None:
+            # Pins and host come from the shared spi bus.
+            spi_parent = await cg.get_variable(spi_id)
+            cg.add(var.set_spi_parent(spi_parent))
+        else:
+            cg.add(var.set_clk_pin(config[CONF_CLK_PIN]))
+            cg.add(var.set_miso_pin(config[CONF_MISO_PIN]))
+            cg.add(var.set_mosi_pin(config[CONF_MOSI_PIN]))
+            cg.add(var.set_interface(SPI_INTERFACE_MAP[config[CONF_INTERFACE]]))
         cg.add(var.set_cs_pin(config[CONF_CS_PIN]))
         if CONF_INTERRUPT_PIN in config:
             cg.add(var.set_interrupt_pin(config[CONF_INTERRUPT_PIN]))
@@ -641,7 +711,6 @@ async def _to_code_esp32(var: cg.MockObj, config: ConfigType) -> None:
 
         cg.add_define("USE_ETHERNET_SPI")
 
-        cg.add(var.set_interface(SPI_INTERFACE_MAP[config[CONF_INTERFACE]]))
         add_idf_sdkconfig_option("CONFIG_ETH_USE_SPI_ETHERNET", True)
         # CONFIG_ETH_SPI_ETHERNET_{TYPE} Kconfig options were removed in IDF 6.0
         # Types that are never built into IDF ship no Kconfig option at all

esphome/components/ethernet/ethernet_component.h

@@ -13,6 +13,9 @@
 #include "esp_eth.h"
 #ifdef USE_ETHERNET_SPI
 #include "hal/spi_types.h"
+#ifdef USE_SPI
+#include "esphome/components/spi/spi.h"
+#endif
 #endif
 #include "esp_eth_mac.h"
 #include "esp_eth_mac_esp.h"
@@ -176,6 +179,9 @@ class EthernetComponent final : public Component {
   void set_reset_pin(uint8_t reset_pin) { this->reset_pin_ = reset_pin; }
   void set_clock_speed(int clock_speed) { this->clock_speed_ = clock_speed; }
   void set_interface(spi_host_device_t interface) { this->interface_ = interface; }
+#ifdef USE_SPI
+  void set_spi_parent(spi::SPIComponent *parent) { this->spi_parent_ = parent; }
+#endif
 #ifdef USE_ETHERNET_SPI_POLLING_SUPPORT
   void set_polling_interval(uint32_t polling_interval) { this->polling_interval_ = polling_interval; }
 #endif
@@ -258,6 +264,11 @@ class EthernetComponent final : public Component {
   int phy_addr_spi_{-1};
   int clock_speed_;
   spi_host_device_t interface_{SPI2_HOST};
+#ifdef USE_SPI
+  // When set, the SPI bus is owned and initialized by this spi component
+  // and the ethernet chip only adds a device to it.
+  spi::SPIComponent *spi_parent_{nullptr};
+#endif
 #ifdef USE_ETHERNET_SPI_POLLING_SUPPORT
   uint32_t polling_interval_{0};
 #endif

esphome/components/ethernet/ethernet_component_esp32.cpp

@@ -59,6 +59,9 @@
 #ifdef USE_ETHERNET_SPI
 #include <driver/gpio.h>
 #include <driver/spi_master.h>
+#ifdef USE_SPI
+#include "esphome/components/spi/spi.h"
+#endif
 #endif
 
 namespace esphome::ethernet {
@@ -168,25 +171,34 @@ void EthernetComponent::ethernet_lazy_init_() {
   // Install GPIO ISR handler to be able to service SPI Eth modules interrupts
   gpio_install_isr_service(0);
 
-  spi_bus_config_t buscfg = {
-      .mosi_io_num = this->mosi_pin_,
-      .miso_io_num = this->miso_pin_,
-      .sclk_io_num = this->clk_pin_,
-      .quadwp_io_num = -1,
-      .quadhd_io_num = -1,
-      .data4_io_num = -1,
-      .data5_io_num = -1,
-      .data6_io_num = -1,
-      .data7_io_num = -1,
-      .max_transfer_sz = 0,
-      .flags = 0,
-      .intr_flags = 0,
-  };
+  spi_host_device_t host;
+#ifdef USE_SPI
+  if (this->spi_parent_ != nullptr) {
+    // The bus is owned and already initialized by the spi component; share its host.
+    host = this->spi_parent_->get_interface();
+  } else
+#endif
+  {
+    spi_bus_config_t buscfg = {
+        .mosi_io_num = this->mosi_pin_,
+        .miso_io_num = this->miso_pin_,
+        .sclk_io_num = this->clk_pin_,
+        .quadwp_io_num = -1,
+        .quadhd_io_num = -1,
+        .data4_io_num = -1,
+        .data5_io_num = -1,
+        .data6_io_num = -1,
+        .data7_io_num = -1,
+        .max_transfer_sz = 0,
+        .flags = 0,
+        .intr_flags = 0,
+    };
 
-  auto host = this->interface_;
+    host = this->interface_;
 
-  err = spi_bus_initialize(host, &buscfg, SPI_DMA_CH_AUTO);
-  ESPHL_ERROR_CHECK(err, "SPI bus initialize error");
+    err = spi_bus_initialize(host, &buscfg, SPI_DMA_CH_AUTO);
+    ESPHL_ERROR_CHECK(err, "SPI bus initialize error");
+  }
 #endif
   // Network interface setup handled by network component
 
@@ -575,17 +587,25 @@ void EthernetComponent::dump_config() {
                 YESNO(this->is_connected()));
   this->dump_connect_params_();
 #ifdef USE_ETHERNET_SPI
-  ESP_LOGCONFIG(TAG,
-                "  CLK Pin: %u\n"
-                "  MISO Pin: %u\n"
-                "  MOSI Pin: %u\n"
-                "  CS Pin: %u",
-                this->clk_pin_, this->miso_pin_, this->mosi_pin_, this->cs_pin_);
-  const char *spi_interface = "spi3";
-  if (this->interface_ == SPI2_HOST) {
-    spi_interface = "spi2";
+#ifdef USE_SPI
+  if (this->spi_parent_ != nullptr) {
+    // Pins and interface come from the shared spi bus; only CS is ours.
+    ESP_LOGCONFIG(TAG, "  CS Pin: %u", this->cs_pin_);
+  } else
+#endif
+  {
+    ESP_LOGCONFIG(TAG,
+                  "  CLK Pin: %u\n"
+                  "  MISO Pin: %u\n"
+                  "  MOSI Pin: %u\n"
+                  "  CS Pin: %u",
+                  this->clk_pin_, this->miso_pin_, this->mosi_pin_, this->cs_pin_);
+    const char *spi_interface = "spi3";
+    if (this->interface_ == SPI2_HOST) {
+      spi_interface = "spi2";
+    }
+    ESP_LOGCONFIG(TAG, "  Interface: %s", spi_interface);
   }
-  ESP_LOGCONFIG(TAG, "  Interface: %s", spi_interface);
 #ifdef USE_ETHERNET_SPI_POLLING_SUPPORT
   if (this->polling_interval_ != 0) {
     ESP_LOGCONFIG(TAG, "  Polling Interval: %" PRIu32 " ms", this->polling_interval_);

esphome/components/external_components/__init__.py

@@ -71,6 +71,33 @@ def _process_git_config(config: dict[str, Any], refresh: TimePeriodSeconds) -> P
     return components_dir
 
 
+def _log_overridden_components(
+    conf: dict[str, Any], component_names: list[str]
+) -> None:
+    overridden = [
+        name
+        for name in component_names
+        if (loader.CORE_COMPONENTS_PATH / name / "__init__.py").is_file()
+    ]
+    if not overridden:
+        return
+    if conf[CONF_TYPE] == TYPE_GIT:
+        source = conf[CONF_URL]
+        if ref := conf.get(CONF_REF):
+            source = f"{source}@{ref}"
+        if path := conf.get(CONF_PATH):
+            source = f"{source} ({path})"
+    else:
+        source = conf[CONF_PATH]
+    _LOGGER.info(
+        "External components are overriding built-in components:\n"
+        "  source: %s\n"
+        "  components: %s",
+        source,
+        ", ".join(sorted(overridden)),
+    )
+
+
 def _process_single_config(config: dict[str, Any]) -> None:
     conf = config[CONF_SOURCE]
     if conf[CONF_TYPE] == TYPE_GIT:
@@ -84,8 +111,8 @@ def _process_single_config(config: dict[str, Any]) -> None:
         raise NotImplementedError
 
     if config[CONF_COMPONENTS] == "all":
-        num_components = len(list(components_dir.glob("*/__init__.py")))
-        if num_components > 100:
+        component_names = [p.parent.name for p in components_dir.glob("*/__init__.py")]
+        if len(component_names) > 100:
             # Prevent accidentally including all components from an esphome fork/branch
             # In this case force the user to manually specify which components they want to include
             raise cv.Invalid(
@@ -102,6 +129,9 @@ def _process_single_config(config: dict[str, Any]) -> None:
                     [CONF_COMPONENTS, i],
                 )
         allowed_components = config[CONF_COMPONENTS]
+        component_names = allowed_components
+
+    _log_overridden_components(conf, component_names)
 
     loader.install_meta_finder(components_dir, allowed_components=allowed_components)
 

esphome/components/gpio/one_wire/gpio_one_wire.cpp

@@ -55,8 +55,11 @@ int HOT IRAM_ATTR GPIOOneWireBus::reset_int() {
     delayMicroseconds(1);
   }
 
-  // delay J
-  delayMicroseconds(start + 480 - micros());
+  // delay J: finish the 480us slot, but never spin if it already elapsed
+  // (unsigned wrap here would busy-wait for minutes with interrupts off)
+  uint32_t elapsed = micros() - start;
+  if (elapsed < 480)
+    delayMicroseconds(480 - elapsed);
   this->pin_.digital_write(true);
   this->pin_.pin_mode(gpio::FLAG_OUTPUT);
   return r ? 1 : 0;

esphome/components/hoermann_hcp/button/__init__.py

@@ -0,0 +1,43 @@
+import esphome.codegen as cg
+from esphome.components import button
+import esphome.config_validation as cv
+from esphome.const import ICON_AIR_FILTER
+from esphome.types import ConfigType
+
+from .. import CONF_HOERMANN_HCP_ID, HoermannHcp, hoermann_hcp_ns
+
+DEPENDENCIES = ["hoermann_hcp"]
+
+CONF_HALF_OPEN = "half_open"
+CONF_VENT = "vent"
+
+ICON_GARAGE_OPEN_VARIANT = "mdi:garage-open-variant"
+
+HoermannHcpVentButton = hoermann_hcp_ns.class_("HoermannHcpVentButton", button.Button)
+HoermannHcpHalfOpenButton = hoermann_hcp_ns.class_(
+    "HoermannHcpHalfOpenButton", button.Button
+)
+
+BUTTON_KEYS = (CONF_VENT, CONF_HALF_OPEN)
+
+CONFIG_SCHEMA = cv.All(
+    cv.Schema(
+        {
+            cv.GenerateID(CONF_HOERMANN_HCP_ID): cv.use_id(HoermannHcp),
+            cv.Optional(CONF_VENT): button.button_schema(
+                HoermannHcpVentButton, icon=ICON_AIR_FILTER
+            ),
+            cv.Optional(CONF_HALF_OPEN): button.button_schema(
+                HoermannHcpHalfOpenButton, icon=ICON_GARAGE_OPEN_VARIANT
+            ),
+        }
+    ),
+    cv.has_at_least_one_key(*BUTTON_KEYS),
+)
+
+
+async def to_code(config: ConfigType) -> None:
+    parent = await cg.get_variable(config[CONF_HOERMANN_HCP_ID])
+    for key in BUTTON_KEYS:
+        if (conf := config.get(key)) is not None:
+            await button.new_button(conf, parent)

esphome/components/hoermann_hcp/button/hoermann_hcp_button.h

@@ -0,0 +1,34 @@
+#pragma once
+
+#include "esphome/components/button/button.h"
+#include "../hoermann_hcp.h"
+
+namespace esphome::hoermann_hcp {
+
+// The door commands the cover has no equivalent for. A refused command is already reported by the hub and
+// leaves nothing to correct here, because a button carries no state of its own.
+class HoermannHcpButton : public button::Button {
+ public:
+  explicit HoermannHcpButton(HoermannHcp *parent) : parent_(parent) {}
+
+ protected:
+  HoermannHcp *const parent_;
+};
+
+class HoermannHcpVentButton final : public HoermannHcpButton {
+ public:
+  using HoermannHcpButton::HoermannHcpButton;
+
+ protected:
+  void press_action() override { this->parent_->vent_door(); }
+};
+
+class HoermannHcpHalfOpenButton final : public HoermannHcpButton {
+ public:
+  using HoermannHcpButton::HoermannHcpButton;
+
+ protected:
+  void press_action() override { this->parent_->half_open_door(); }
+};
+
+}  // namespace esphome::hoermann_hcp

esphome/components/hoermann_hcp/hoermann_hcp.cpp

@@ -22,6 +22,9 @@ static constexpr uint8_t MAX_LIGHT_TOGGLES_IN_FLIGHT = 4;
 static constexpr HoermannHcpCommand COMMAND_OPEN{"open", 0x0210, 0x0110};
 static constexpr HoermannHcpCommand COMMAND_CLOSE{"close", 0x0220, 0x0120};
 static constexpr HoermannHcpCommand COMMAND_IMPULSE{"impulse", 0x0240, 0x0140};
+// The intermediate positions are named in the second register, so the first only carries the phase.
+static constexpr HoermannHcpCommand COMMAND_VENT{"vent", 0x0200, 0x0100, 0x4000, 0x4000};
+static constexpr HoermannHcpCommand COMMAND_HALF_OPEN{"half open", 0x0200, 0x0100, 0x0400, 0x0400};
 // The lamp is named in the second register, but its phase bytes follow no scheme the door commands share.
 static constexpr HoermannHcpCommand COMMAND_TOGGLE_LAMP{"toggle light", 0x0100, 0x0800, 0x0200, 0x0200, false};
 
@@ -286,6 +289,8 @@ bool HoermannHcp::queue_command_(const HoermannHcpCommand &command) {
 bool HoermannHcp::open_door() { return this->queue_command_(COMMAND_OPEN); }
 bool HoermannHcp::close_door() { return this->queue_command_(COMMAND_CLOSE); }
 bool HoermannHcp::impulse_door() { return this->queue_command_(COMMAND_IMPULSE); }
+bool HoermannHcp::vent_door() { return this->queue_command_(COMMAND_VENT); }
+bool HoermannHcp::half_open_door() { return this->queue_command_(COMMAND_HALF_OPEN); }
 bool HoermannHcp::toggle_light() {
   if (this->light_toggles_in_flight_ >= MAX_LIGHT_TOGGLES_IN_FLIGHT) {
     ESP_LOGW(TAG, "Too many lamp toggles are still waiting to be confirmed, dropping this one");

esphome/components/hoermann_hcp/hoermann_hcp.h

@@ -22,7 +22,8 @@ enum class DoorState : uint8_t {
 };
 
 // A HCP command is a simulated key press: the pressed value is presented to the bus controller, then after a
-// short delay the released value. Each half also carries a second register, which only the lamp command uses.
+// short delay the released value. Each half also carries a second register, which names the buttons that do
+// not fit into the first.
 struct HoermannHcpCommand {
   const char *name;
   uint16_t pressed_value;
@@ -54,6 +55,9 @@ class HoermannHcp : public PollingComponent, public modbus::ModbusServerDevice {
   bool open_door();
   bool close_door();
   bool impulse_door();
+  // The door drives to these intermediate positions on its own, so neither takes a target to be stopped at.
+  bool vent_door();
+  bool half_open_door();
   bool stop_door();
   bool set_position(float position);
   bool toggle_light();

esphome/components/host/__init__.py

@@ -37,6 +37,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_MAC_ADDRESS, default="98:35:69:ab:f6:79"): cv.mac_address,
         }
     ),
+    cv.require_platformio_toolchain("host"),
     set_core_data,
 )
 

esphome/components/http_request/__init__.py

@@ -17,12 +17,14 @@ from esphome.const import (
     CONF_TIMEOUT,
     CONF_URL,
     CONF_WATCHDOG_TIMEOUT,
+    PLATFORM_ESP32,
     PLATFORM_HOST,
     PlatformFramework,
     __version__,
 )
-from esphome.core import CORE, ID, Lambda
+from esphome.core import CORE, ID, Lambda, TimePeriodMilliseconds
 from esphome.cpp_generator import MockObj, TemplateArgsType
+import esphome.final_validate as fv
 from esphome.helpers import IS_MACOS
 from esphome.types import ConfigType
 
@@ -94,6 +96,34 @@ def validate_ssl_verification(config: ConfigType) -> ConfigType:
     return config
 
 
+# esp_http_client_open() runs DNS, TCP connect and the TLS handshake with no
+# watchdog feed in between; each can take up to `timeout` on ESP-IDF.
+WATCHDOG_TIMEOUT_MULTIPLIER = 3
+# Headroom over the exact worst case so a fully stalled open does not land on
+# the watchdog deadline.
+WATCHDOG_TIMEOUT_MARGIN_MS = 1000
+
+
+def default_watchdog_timeout(config: ConfigType) -> None:
+    """Arm the request watchdog on ESP32 when the user did not set it.
+
+    The default never goes below the platform task watchdog, so a user who
+    widened `esp32.watchdog_timeout` keeps that window during requests.
+    """
+    if not CORE.is_esp32 or CONF_WATCHDOG_TIMEOUT in config:
+        return
+    derived_ms = (
+        config[CONF_TIMEOUT].total_milliseconds * WATCHDOG_TIMEOUT_MULTIPLIER
+        + WATCHDOG_TIMEOUT_MARGIN_MS
+    )
+    platform_ms = fv.full_config.get()[PLATFORM_ESP32][
+        CONF_WATCHDOG_TIMEOUT
+    ].total_milliseconds
+    config[CONF_WATCHDOG_TIMEOUT] = TimePeriodMilliseconds(
+        milliseconds=max(derived_ms, platform_ms)
+    )
+
+
 def _declare_request_class(value: Any) -> ID:
     if CORE.is_host:
         return cv.declare_id(HttpRequestHost)(value)
@@ -153,6 +183,8 @@ CONFIG_SCHEMA = cv.All(
     validate_ssl_verification,
 )
 
+FINAL_VALIDATE_SCHEMA = default_watchdog_timeout
+
 
 async def to_code(config: ConfigType) -> None:
     var = cg.new_Pvariable(config[CONF_ID])
@@ -196,9 +228,7 @@ async def to_code(config: ConfigType) -> None:
                 #     framework:
                 #       advanced:
                 #         use_full_certificate_bundle: true
-                esp32.add_idf_sdkconfig_option(
-                    "CONFIG_MBEDTLS_CERTIFICATE_BUNDLE", True
-                )
+                esp32.require_certificate_bundle()
 
         esp32.add_idf_sdkconfig_option(
             "CONFIG_ESP_TLS_INSECURE",

esphome/components/http_request/http_request_idf.cpp

@@ -142,12 +142,13 @@ std::shared_ptr<HttpContainer> HttpRequestIDF::perform(const std::string &url, c
     const char *buf = body.c_str();
     while (write_left > 0) {
       int written = esp_http_client_write(client, buf + write_index, write_left);
-      if (written < 0) {
+      if (written <= 0) {
         err = ESP_FAIL;
         break;
       }
       write_left -= written;
       write_index += written;
+      container->feed_wdt();
     }
   }
 

esphome/components/improv_base/__init__.py

@@ -43,4 +43,4 @@ async def setup_improv_core(var: MockObj, config: ConfigType, component: str) ->
         cg.add(var.set_next_url(_process_next_url(next_url)))
         cg.add_define(f"USE_{component.upper()}_NEXT_URL")
 
-    cg.add_library("improv/Improv", "1.2.6")
+    cg.add_library("improv/Improv", "1.2.7")

esphome/components/key_collector/key_collector.cpp

@@ -14,6 +14,7 @@ void KeyCollector::loop() {
 }
 
 void KeyCollector::dump_config() {
+#if ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_CONFIG
   ESP_LOGCONFIG(TAG, "Key Collector:");
   if (this->min_length_ > 0)
     ESP_LOGCONFIG(TAG, "  min length: %d", this->min_length_);
@@ -35,6 +36,7 @@ void KeyCollector::dump_config() {
     ESP_LOGCONFIG(TAG, "  allowed keys '%s'", this->allowed_keys_.c_str());
   if (this->timeout_ > 0)
     ESP_LOGCONFIG(TAG, "  entry timeout: %0.1f", this->timeout_ / 1000.0);
+#endif
 }
 
 void KeyCollector::add_provider(key_provider::KeyProvider *provider) {

esphome/components/libretiny/__init__.py

@@ -300,7 +300,7 @@ FRAMEWORK_SCHEMA = cv.All(
     _check_debug_order,
 )
 
-CONFIG_SCHEMA = cv.All(_notify_old_style)
+CONFIG_SCHEMA = cv.All(_notify_old_style, cv.require_platformio_toolchain("LibreTiny"))
 
 BASE_SCHEMA = cv.Schema(
     {
@@ -314,6 +314,7 @@ BASE_SCHEMA = cv.Schema(
 )
 
 BASE_SCHEMA.add_extra(_detect_variant)
+BASE_SCHEMA.add_extra(cv.require_platformio_toolchain("LibreTiny"))
 BASE_SCHEMA.add_extra(_update_core_data)
 
 

esphome/components/logger/__init__.py

@@ -20,6 +20,7 @@ from esphome.components.esp32 import (
     VARIANT_ESP32S31,
     add_idf_sdkconfig_option,
     get_esp32_variant,
+    idf_version,
     require_usb_serial_jtag_secondary,
     require_vfs_termios,
 )
@@ -459,6 +460,16 @@ async def _late_logger_init(config: ConfigType) -> None:
         elif config[CONF_HARDWARE_UART] == USB_SERIAL_JTAG:
             add_idf_sdkconfig_option("CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG", True)
             cg.add_define("USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG")
+        # Log V2 formats centrally in esp_log() (~4KB flash, ~180B RAM). 6.1
+        # adds CONSTRAINED_ENV_SAFE=n, keeping early/DRAM logs on
+        # esp_rom_printf instead of pulling ~1.2KB esp_rom_vprintf into IRAM.
+        if idf_version() >= cv.Version(6, 1, 0):
+            add_idf_sdkconfig_option("CONFIG_LOG_VERSION_1", False)
+            add_idf_sdkconfig_option("CONFIG_LOG_VERSION_2", True)
+            add_idf_sdkconfig_option("CONFIG_LOG_API_CONSTRAINED_ENV_SAFE", False)
+            cg.add_define("USE_ESP32_LOG_V2")
+            # --wrap: a strong definition collides; see logger_esp32.cpp
+            cg.add_build_flag("-Wl,--wrap=esp_log_format")
     # Define platform support flags for components that need auto-detection
     try:
         uart_selection(USB_SERIAL_JTAG)

esphome/components/logger/logger_esp32.cpp

@@ -149,4 +149,64 @@ const LogString *Logger::get_uart_selection_() {
 }
 
 }  // namespace esphome::logger
+
+#ifdef USE_ESP32_LOG_V2
+#include <esp_private/log_message.h>
+#include <esp_log_write.h>
+#include <esp_rom_sys.h>
+
+namespace esphome::logger {
+
+// IDF levels NONE=0 E=1 W=2 I=3 D=4 V=5; ESPHome inserts CONFIG at 4
+static inline uint8_t idf_to_esphome_level(uint8_t idf_level) {
+  if (idf_level <= 3)
+    return idf_level;
+  return idf_level >= 5 ? ESPHOME_LOG_LEVEL_VERBOSE : ESPHOME_LOG_LEVEL_DEBUG;
+}
+
+// Console output without the logger hook: early boot and constrained env
+// (fwrite locks crash during PHY init on USB JTAG). Cold path.
+static void __attribute__((noinline)) esp_log_format_direct(esp_log_msg_t *message) {
+  // Constrained-env stacks are small; enough for IDF's own one-liners
+  char stack_buf[256];
+  LogBuffer buf{stack_buf, sizeof(stack_buf)};
+  buf.write_header(idf_to_esphome_level(message->config.opts.log_level), message->tag ? message->tag : "esp-idf", 0,
+                   nullptr);
+  buf.format_body(message->format, message->args);
+  esp_rom_printf("%s\n", stack_buf);
+}
+
+}  // namespace esphome::logger
+
+extern "C" {
+// Replaces liblog's formatter, which calls the vprintf hook 3x per message
+// (header, body, newline). --wrap because a strong definition collides:
+// liblog resolves the symbol within its own archive. Not IRAM_ATTR: cache-off
+// callers bypass esp_log() under CONSTRAINED_ENV_SAFE=n.
+void __wrap_esp_log_format(esp_log_msg_t *message) {  // NOLINT
+  extern vprintf_like_t esp_log_vprint_func;
+  if (esp_log_vprint_func == &esphome::esp_idf_log_vprintf_) [[likely]] {
+    if (message->config.opts.constrained_env) [[unlikely]] {
+      esphome::logger::esp_log_format_direct(message);
+      return;
+    }
+    // Call the logger directly with V2's separate tag and severity so lines
+    // render as e.g. "[E][wifi]:"; the hook signature cannot carry them.
+    // global_logger is set before the hook is installed (pre_setup above).
+    esphome::logger::global_logger->log_vprintf_(esphome::logger::idf_to_esphome_level(message->config.opts.log_level),
+                                                 message->tag ? message->tag : "esp-idf", 0, message->format,
+                                                 message->args);
+    return;
+  }
+  extern int vprintf(const char *, __gnuc_va_list);  // NOLINT
+  if (esp_log_vprint_func == &vprintf || message->config.opts.constrained_env) {
+    // No hook yet (early boot) or constrained env: direct console output
+    esphome::logger::esp_log_format_direct(message);
+    return;
+  }
+  // Custom hook via esp_log_set_vprintf: forward the body as-is
+  esp_log_vprint_func(message->format, message->args);
+}
+}  // extern "C"
+#endif  // USE_ESP32_LOG_V2
 #endif

esphome/components/lvgl/__init__.py

@@ -57,7 +57,6 @@ from .defines import (
     CONF_ALIGN_TO_LAMBDA_ID,
     CONF_ANIMATIONS,
     LOGGER,
-    add_lv_use,
     get_focused_widgets,
     get_lv_images_used,
     get_refreshed_widgets,
@@ -74,7 +73,6 @@ from .keypads import KEYPADS_CONFIG, keypads_to_code
 from .lv_validation import lv_bool
 from .lvcode import LvContext, LvglComponent, lv_event_t_ptr, lvgl_static
 from .schemas import (
-    BASE_PROPS,
     DISP_BG_SCHEMA,
     FULL_STYLE_SCHEMA,
     SET_STATE_SCHEMA,
@@ -83,6 +81,7 @@ from .schemas import (
     STYLE_SCHEMA,
     WIDGET_TYPES,
     any_widget_schema,
+    apply_style_driven_defines,
     container_schema,
     container_schema_value,
     theme_schema,
@@ -108,7 +107,6 @@ from .widgets import (
     get_screen_active,
     set_obj_properties,
 )
-from .widgets.img import CONF_IMAGE
 
 # Import only what we actually use directly in this file
 from .widgets.msgbox import MSGBOX_SCHEMA, msgboxes_to_code
@@ -455,6 +453,15 @@ async def to_code(configs):
     # Mark all widgets as completed so awaiters of ``wait_for_widgets`` proceed.
     set_widgets_completed(True)
     async with LvContext():
+        # Local import: lv_list imports meter, which imports obj_spec/set_obj_properties
+        # from this module's own namespace - a top-level import here would be circular.
+        from .widgets.lv_list import finish_list_triggers
+
+        # Must run before generate_triggers(): that's what actually processes other
+        # widgets' on_click etc. automations, which can include lvgl.list.add/remove/
+        # clear actions that fire a list's on_add/on_remove triggers - those need to
+        # already exist by then, not still be pending.
+        await finish_list_triggers()
         await generate_triggers()
         await generate_align_tos(configs[0])
         for config in configs:
@@ -481,34 +488,16 @@ async def to_code(configs):
 
     # This must be done after all widgets are created
     styles_used = df.get_styles_used()
-    if any(BASE_PROPS.get(x) is lvalid.lv_image for x in styles_used):
-        add_lv_use(CONF_IMAGE)
+    apply_style_driven_defines(styles_used)
     for use in df.get_lv_uses():
         df.add_define(f"LV_USE_{use.upper()}")
         cg.add_define(f"USE_LVGL_{use.upper()}")
 
-    if {
-        "transform_rotation",
-        "transform_scale",
-        "transform_scale_x",
-        "transform_scale_y",
-    } & styles_used:
-        df.add_define("LV_COLOR_SCREEN_TRANSP", "1")
-
     if configs[0].get(df.CONF_THEME, {}).get(df.CONF_DARK_MODE):
         df.add_define("LV_THEME_DEFAULT_DARK", "1")
 
     # Currently always need RGB565 for the display buffer, and ARGB8888 is used for layer blending
     lv_image_formats = {"RGB565", "ARGB8888"}
-    if {
-        "drop_shadow_color",
-        "drop_shadow_offset_x",
-        "drop_shadow_offset_y",
-        "drop_shadow_opa",
-        "drop_shadow_quality",
-        "drop_shadow_radius",
-    } & styles_used:
-        lv_image_formats.add("A8")
 
     for image_id in get_lv_images_used():
         await cg.get_variable(image_id)

esphome/components/lvgl/automation.py

@@ -416,7 +416,7 @@ async def obj_set_z_index_to_code(config, action_id, template_arg, args):
                 widget.obj, literal(f"{lv_expr.obj_get_index(widget.obj)} + 1")
             )
         elif position == "DOWN":
-            with LvConditional(f"{lv_expr.obj_get_index(widget.obj)} > 0"):
+            with LvConditional(literal(f"{lv_expr.obj_get_index(widget.obj)} > 0")):
                 lv_obj.move_to_index(
                     widget.obj, literal(f"{lv_expr.obj_get_index(widget.obj)} - 1")
                 )

esphome/components/lvgl/defines.py

@@ -585,6 +585,21 @@ FLEX_FLOWS = LvConstant(
     "COLUMN_WRAP_REVERSE",
 )
 
+TRANSFORM_STYLE_PROPS = frozenset(
+    {"transform_rotation", "transform_scale", "transform_scale_x", "transform_scale_y"}
+)
+
+DROP_SHADOW_STYLE_PROPS = frozenset(
+    {
+        "drop_shadow_color",
+        "drop_shadow_offset_x",
+        "drop_shadow_offset_y",
+        "drop_shadow_opa",
+        "drop_shadow_quality",
+        "drop_shadow_radius",
+    }
+)
+
 OBJ_FLAGS = (
     "hidden",
     "clickable",

esphome/components/lvgl/lvcode.py

@@ -242,7 +242,7 @@ class LocalVariable(MockObj):
                     self.base.type, self.modifier, self.base.id
                 )
             )
-        return MockObj(self.base)
+        return MockObj(self.base, "->" if self.modifier == "*" else ".")
 
     def __exit__(self, *args):
         CodeContext.end_block()
@@ -283,7 +283,15 @@ class MockLv:
 
 class LvConditional:
     def __init__(self, condition):
-        self.condition = condition
+        # Condition is embedded directly into a raw `if (...)` statement below, rather than
+        # going through the argument-list machinery (ExpressionList) that would otherwise
+        # convert a native Python value (e.g. a plain bool) to a proper Expression.
+        if isinstance(condition, str):
+            raise ValueError(
+                "LvConditional condition must not be a raw str; wrap it in literal() "
+                "if a string literal condition is really intended"
+            )
+        self.condition = cg.safe_exp(condition) if condition is not None else None
 
     def __enter__(self):
         if self.condition is not None:
@@ -303,6 +311,35 @@ class LvConditional:
         CodeContext.code_context.indent()
 
 
+class LvCountdown:
+    """
+    Emits a C++ `for` loop that counts an int variable down from `count - 1` to `0` inclusive.
+    Used to iterate over a widget's children in reverse, e.g. to fire a trigger once per child
+    before they're all removed.
+    """
+
+    def __init__(self, var_name: str, count):
+        self.var_name = var_name
+        self.count = count
+
+    def __enter__(self):
+        # Cast explicitly rather than relying on `count`'s (typically unsigned) type to wrap
+        # and then narrow back to a negative int when count is 0 -- true in practice on every
+        # toolchain ESPHome targets, but not worth leaning on.
+        CodeContext.append(
+            RawStatement(
+                f"for (int {self.var_name} = (int) ({self.count}) - 1; {self.var_name} >= 0; "
+                f"{self.var_name}--) {{"
+            )
+        )
+        CodeContext.code_context.indent()
+        return literal(self.var_name)
+
+    def __exit__(self, *args):
+        CodeContext.code_context.detent()
+        CodeContext.append(RawStatement("}"))
+
+
 class ReturnStatement(ExpressionStatement):
     def __str__(self):
         return f"return {self.expression};"

esphome/components/lvgl/lvgl_esphome.cpp

@@ -208,21 +208,21 @@ void LvglComponent::esphome_lvgl_init() {
   lv_update_event = static_cast<lv_event_code_t>(lv_event_register_id());
 }
 
-void LvglComponent::add_event_cb(lv_obj_t *obj, event_callback_t callback, lv_event_code_t event) {
-  lv_obj_add_event_cb(obj, callback, event, nullptr);
+void LvglComponent::add_event_cb(lv_obj_t *obj, event_callback_t callback, lv_event_code_t event, void *user_data) {
+  lv_obj_add_event_cb(obj, callback, event, user_data);
 }
 
 void LvglComponent::add_event_cb(lv_obj_t *obj, event_callback_t callback, lv_event_code_t event1,
-                                 lv_event_code_t event2) {
-  add_event_cb(obj, callback, event1);
-  add_event_cb(obj, callback, event2);
+                                 lv_event_code_t event2, void *user_data) {
+  add_event_cb(obj, callback, event1, user_data);
+  add_event_cb(obj, callback, event2, user_data);
 }
 
 void LvglComponent::add_event_cb(lv_obj_t *obj, event_callback_t callback, lv_event_code_t event1,
-                                 lv_event_code_t event2, lv_event_code_t event3) {
-  add_event_cb(obj, callback, event1);
-  add_event_cb(obj, callback, event2);
-  add_event_cb(obj, callback, event3);
+                                 lv_event_code_t event2, lv_event_code_t event3, void *user_data) {
+  add_event_cb(obj, callback, event1, user_data);
+  add_event_cb(obj, callback, event2, user_data);
+  add_event_cb(obj, callback, event3, user_data);
 }
 
 void LvglComponent::add_page(LvPageType *page) {
@@ -525,6 +525,52 @@ void IndicatorLine::update_length_() {
 }
 #endif
 
+#ifdef USE_LVGL_TABLE
+uint32_t lv_table_get_selected_row(lv_obj_t *obj) {
+  uint32_t row;
+  uint32_t column;
+  lv_table_get_selected_cell(obj, &row, &column);
+  return row;
+}
+
+uint32_t lv_table_get_selected_column(lv_obj_t *obj) {
+  uint32_t row;
+  uint32_t column;
+  lv_table_get_selected_cell(obj, &row, &column);
+  return column;
+}
+
+void LvTableType::set_obj(lv_obj_t *lv_obj) {
+  LvCompound::set_obj(lv_obj);
+  lv_obj_add_event_cb(
+      lv_obj,
+      [](lv_event_t *e) {
+        auto *table = static_cast<LvTableType *>(lv_event_get_user_data(e));
+        table->update_column_widths_();
+      },
+      LV_EVENT_SIZE_CHANGED, this);
+}
+
+void LvTableType::add_column_width_pct(uint32_t col, uint8_t pct) {
+  for (auto &i : this->column_pct_) {
+    if (i.col == col) {
+      i.pct = pct;
+      this->update_column_widths_();
+      return;
+    }
+  }
+  this->column_pct_.push_back({col, pct});
+  this->update_column_widths_();
+}
+
+void LvTableType::update_column_widths_() {
+  auto content_width = lv_obj_get_content_width(this->obj);
+  for (const auto &col : this->column_pct_) {
+    lv_table_set_column_width(this->obj, col.col, content_width * col.pct / 100);
+  }
+}
+#endif  // USE_LVGL_TABLE
+
 #ifdef USE_LVGL_KEY_LISTENER
 LVEncoderListener::LVEncoderListener(lv_indev_type_t type, uint16_t long_press_time, uint16_t long_press_repeat_time) {
   this->drv_ = lv_indev_create();
@@ -551,21 +597,21 @@ std::string LvSelectable::get_selected_text() {
   return this->options_[selected];
 }
 
-static std::string join_string(std::vector<std::string> options) {
+static std::string join_string(const FixedVector<const char *> &options) {
   return std::accumulate(
       options.begin(), options.end(), std::string(),
-      [](const std::string &a, const std::string &b) -> std::string { return a + (!a.empty() ? "\n" : "") + b; });
+      [](const std::string &a, const char *b) -> std::string { return a + (!a.empty() ? "\n" : "") + b; });
 }
 
 void LvSelectable::set_selected_text(const std::string &text, lv_anim_enable_t anim) {
-  auto index = std::find(this->options_.begin(), this->options_.end(), text);
+  auto *index = std::find(this->options_.begin(), this->options_.end(), text);
   if (index != this->options_.end()) {
     this->set_selected_index(index - this->options_.begin(), anim);
     lv_obj_send_event(this->obj, lv_update_event, nullptr);
   }
 }
 
-void LvSelectable::set_options(std::vector<std::string> options) {
+void LvSelectable::set_options(FixedVector<const char *> options) {
   auto index = this->get_selected_index();
   if (index >= options.size())
     index = options.size() - 1;
@@ -963,6 +1009,25 @@ lv_obj_t *lv_container_create(lv_obj_t *parent) {
   lv_obj_class_init_obj(obj);
   return obj;
 }
+
+#ifdef USE_LVGL_LIST
+int lv_list_get_row_index(lv_obj_t *list, lv_obj_t *child) {
+  for (lv_obj_t *obj = child; obj != nullptr; obj = lv_obj_get_parent(obj)) {
+    if (lv_obj_get_parent(obj) == list)
+      return lv_obj_get_index(obj);
+  }
+  ESP_LOGW(TAG, "lvgl.list: entry is not inside the list it was added to");
+  return -1;
+}
+
+lv_obj_t *lv_list_get_row_for_remove(lv_obj_t *list, int index) {
+  lv_obj_t *child = index < 0 ? nullptr : lv_obj_get_child(list, index);
+  if (child == nullptr) {
+    ESP_LOGW(TAG, "lvgl.list.remove: index %d is out of range, ignoring", index);
+  }
+  return child;
+}
+#endif  // USE_LVGL_LIST
 }  // namespace esphome::lvgl
 
 lv_result_t lv_mem_test_core() { return LV_RESULT_OK; }

esphome/components/lvgl/lvgl_esphome.h

@@ -58,6 +58,10 @@ lv_obj_t *lv_container_create(lv_obj_t *parent);
 void lv_scale_draw_event_cb(lv_event_t *e, int16_t range_start, int16_t range_end, lv_color_t color_start,
                             lv_color_t color_end, int width, bool local);
 #endif
+#ifdef USE_LVGL_TABLE
+uint32_t lv_table_get_selected_row(lv_obj_t *obj);
+uint32_t lv_table_get_selected_column(lv_obj_t *obj);
+#endif
 #if LV_COLOR_DEPTH == 16
 static const display::ColorBitness LV_BITNESS = display::ColorBitness::COLOR_BITNESS_565;
 #elif LV_COLOR_DEPTH == 32
@@ -116,6 +120,18 @@ inline void lv_animimg_set_src(lv_obj_t *img, std::vector<image::Image *> images
 int16_t lv_get_needle_angle_for_value(lv_obj_t *obj, int32_t value);
 #endif
 
+#ifdef USE_LVGL_LIST
+// Returns the index, within `list`, of the entry that contains `child`: `child` itself if it's a
+// direct child of `list`, or the ancestor of `child` that is, when `child` is nested inside a
+// widget hierarchy added via `lvgl.list.add`. Returns -1 if `child` isn't inside `list` at all.
+int lv_list_get_row_index(lv_obj_t *list, lv_obj_t *child);
+
+// Returns the entry at `index` within `list`, or nullptr (logging why) if `index` is out of
+// range -- shared by every `lvgl.list.remove` call site, since a templatable index can go out of
+// range at runtime in ways config validation can't catch (e.g. driven by a sensor value).
+lv_obj_t *lv_list_get_row_for_remove(lv_obj_t *list, int index);
+#endif
+
 #ifdef USE_LVGL_GRADIENT
 /**
  *
@@ -135,6 +151,12 @@ class LvCompound {
   lv_obj_t *obj{};
 };
 
+// Frees a heap-allocated LvCompound wrapper on LV_EVENT_DELETE, since lv_obj_del() only knows how to destroy LVGL's own
+// object tree, not a separate C++ object paired with one of its nodes.
+template<typename T> void delete_lv_compound_on_delete(lv_event_t *e) {
+  delete static_cast<T *>(lv_event_get_user_data(e));
+}
+
 class LvglComponent;
 
 class LvPageType : public Parented<LvglComponent> {
@@ -241,10 +263,11 @@ class LvglComponent final : public PollingComponent {
   static void esphome_lvgl_init();
 
   //  Convenience overloads for adding a callback for one or more events
-  static void add_event_cb(lv_obj_t *obj, event_callback_t callback, lv_event_code_t event);
-  static void add_event_cb(lv_obj_t *obj, event_callback_t callback, lv_event_code_t event1, lv_event_code_t event2);
+  static void add_event_cb(lv_obj_t *obj, event_callback_t callback, lv_event_code_t event, void *user_data = nullptr);
   static void add_event_cb(lv_obj_t *obj, event_callback_t callback, lv_event_code_t event1, lv_event_code_t event2,
-                           lv_event_code_t event3);
+                           void *user_data = nullptr);
+  static void add_event_cb(lv_obj_t *obj, event_callback_t callback, lv_event_code_t event1, lv_event_code_t event2,
+                           lv_event_code_t event3, void *user_data = nullptr);
 
   // change the state of a widget and fire an event if changed (only needed for CHECKED)
 
@@ -492,6 +515,27 @@ class LvLineType : public LvCompound {
   FixedVector<lv_point_precise_t> points_{};
 };
 #endif
+#ifdef USE_LVGL_TABLE
+// Unlike most size properties, lv_table_set_column_width() only accepts a literal pixel
+// count, so percentage column widths must be recomputed by hand whenever the table's own
+// content width changes.
+class LvTableType : public LvCompound {
+ public:
+  void set_obj(lv_obj_t *lv_obj) override;
+  // count is the number of percentage-width columns, known at code-generation time.
+  void init_column_pct(size_t count) { this->column_pct_.init(count); }
+  void add_column_width_pct(uint32_t col, uint8_t pct);
+
+ protected:
+  void update_column_widths_();
+
+  struct ColumnPct {
+    uint32_t col;
+    uint8_t pct;
+  };
+  FixedVector<ColumnPct> column_pct_{};
+};
+#endif  // USE_LVGL_TABLE
 #if defined(USE_LVGL_DROPDOWN) || defined(LV_USE_ROLLER)
 class LvSelectable : public LvCompound {
  public:
@@ -499,12 +543,12 @@ class LvSelectable : public LvCompound {
   virtual void set_selected_index(size_t index, lv_anim_enable_t anim) = 0;
   void set_selected_text(const std::string &text, lv_anim_enable_t anim);
   std::string get_selected_text();
-  const std::vector<std::string> &get_options() { return this->options_; }
-  void set_options(std::vector<std::string> options);
+  const FixedVector<const char *> &get_options() { return this->options_; }
+  void set_options(FixedVector<const char *> options);
 
  protected:
   virtual void set_option_string(const char *options) = 0;
-  std::vector<std::string> options_{};
+  FixedVector<const char *> options_{};
 };
 
 #ifdef USE_LVGL_DROPDOWN

esphome/components/lvgl/schemas.py

@@ -726,6 +726,26 @@ ALL_STYLES = {
 }
 
 
+def apply_style_driven_defines(props: set[str]) -> None:
+    """Given a set of style-property names in use, registers everything their use
+    drives: add_lv_use(image) if any of them is image-typed (per BASE_PROPS), and
+    the LV_COLOR_SCREEN_TRANSP / LV_DRAW_SW_SUPPORT_A8 defines. Shared between
+    __init__.py (driven by df.get_styles_used(), for statically-declared widgets)
+    and lv_list.py's _register_dynamic_widget_style_uses (driven by scanning a
+    dynamically-added widget's own config), so a future style-driven define added
+    to one can't be missed in the other.
+    """
+    # Local import: avoids a module-load-time cycle (widgets.img -> ... -> schemas).
+    from .widgets.img import CONF_IMAGE
+
+    if any(BASE_PROPS.get(prop) is lvalid.lv_image for prop in props):
+        df.add_lv_use(CONF_IMAGE)
+    if df.TRANSFORM_STYLE_PROPS & props:
+        df.add_define("LV_COLOR_SCREEN_TRANSP", "1")
+    if df.DROP_SHADOW_STYLE_PROPS & props:
+        df.add_define("LV_DRAW_SW_SUPPORT_A8", "1")
+
+
 def strip_defaults(schema: cv.Schema):
     """
     Take a schema and remove any default values, also convert Required to Optional.

esphome/components/lvgl/select/lvgl_select.h

@@ -50,19 +50,10 @@ class LVGLSelect final : public select::Select, public Component {
  protected:
   void control(size_t index) override {
     this->widget_->set_selected_index(index, this->anim_);
-    this->publish();
-  }
-  void set_options_() {
-    // Widget uses std::vector<std::string>, SelectTraits uses FixedVector<const char*>
-    // Convert by extracting c_str() pointers
-    const auto &opts = this->widget_->get_options();
-    FixedVector<const char *> opt_ptrs;
-    opt_ptrs.init(opts.size());
-    for (const auto &opt : opts) {
-      opt_ptrs.push_back(opt.c_str());
-    }
-    this->traits.set_options(opt_ptrs);
+    // The update event fires the widget's on_value/on_update triggers
+    lv_obj_send_event(this->widget_->obj, lv_update_event, nullptr);
   }
+  void set_options_() { this->traits.set_options(this->widget_->get_options()); }
 
   LvSelectable *widget_;
   lv_anim_enable_t anim_;

esphome/components/lvgl/trigger.py

@@ -59,7 +59,10 @@ async def generate_triggers():
     all_triggers = (
         LV_EVENT_TRIGGERS + LV_DISPLAY_EVENT_TRIGGERS + LV_SCREEN_EVENT_TRIGGERS
     )
-    for w in get_widget_map().values():
+    # Snapshot: building a trigger below can recurse into widget creation (e.g. a
+    # buttonmatrix's or tabview's to_code registers its own child widgets), which
+    # would otherwise mutate this dict mid-iteration.
+    for w in list(get_widget_map().values()):
         config = w.config
         if isinstance(w.type, LvScrActType):
             w = get_screen_active(w.var)
@@ -141,7 +144,21 @@ def _get_event_literal(trigger: str | MockObj) -> MockObj:
     return literal("LV_EVENT_" + TRIGGER_MAP[trigger.upper()])
 
 
-async def add_trigger(conf, w, *events: str | MockObj, is_selected=None):
+async def add_trigger(
+    conf, w, *events: str | MockObj, is_selected=None, attach_obj=None, user_data=None
+):
+    """
+    :param attach_obj: The object to actually register the callback on, if different
+        from `w.obj` - used when `w.obj` isn't valid at the point the callback gets
+        registered (e.g. a local variable that's only in scope inside the very
+        block this is called from, not from within the callback body itself; see
+        widgets/lv_list.py's dynamic widget creation). Defaults to `w.obj`.
+    :param user_data: Opaque pointer passed through to the registered event callback,
+        retrievable inside it via `lv_event_get_user_data(event)` - used to recover a
+        compound widget's C++ wrapper, which a captureless callback has no other way
+        to reach when it isn't a global variable (see widgets/lv_list.py). Defaults to
+        `nullptr`.
+    """
     is_selected = is_selected or w.is_selected()
     tid = conf[CONF_TRIGGER_ID]
     trigger = cg.new_Pvariable(tid)
@@ -158,12 +175,14 @@ async def add_trigger(conf, w, *events: str | MockObj, is_selected=None):
             lv_add(trigger.trigger(*value, literal("event")))
     callback = await context.get_lambda()
     event_literals = [_get_event_literal(event) for event in events]
+    attach_obj = w.obj if attach_obj is None else attach_obj
+    user_data = nullptr if user_data is None else user_data
     if str(events[0]) in DISPLAY_TRIGGERS:
         assert len(events) == 1
         lv.display_add_event_cb(
-            lv_expr.obj_get_display(w.obj), callback, event_literals[0], nullptr
+            lv_expr.obj_get_display(attach_obj), callback, event_literals[0], user_data
         )
     else:
         lv_add(
-            lvgl_static.add_event_cb(w.obj, await context.get_lambda(), *event_literals)
+            lvgl_static.add_event_cb(attach_obj, callback, *event_literals, user_data)
         )

esphome/components/lvgl/types.py

@@ -3,6 +3,8 @@ from esphome.const import CONF_TEXT, CONF_VALUE
 from esphome.cpp_generator import MockObj
 from esphome.cpp_types import Component, esphome_ns
 
+from .defines import CONF_SELECTED_INDEX
+
 
 class LvType(cg.MockObjClass):
     def __init__(self, *args, **kwargs):
@@ -112,3 +114,4 @@ class LvSelect(LvType):
             parents=parens,
             **kwargs,
         )
+        self.value_property = CONF_SELECTED_INDEX

esphome/components/lvgl/widgets/__init__.py

@@ -190,18 +190,7 @@ class WidgetType:
             await self.on_create(var, config)
 
         w = Widget.create(wid, var, self, config)
-        if theme := get_theme_widget_map().get(self.name):
-            for part, states in theme.items():
-                part = "LV_PART_" + part.upper()
-                for state, style in states.items():
-                    state = "LV_STATE_" + state.upper()
-                    if state == "LV_STATE_DEFAULT":
-                        lv_state = literal(part)
-                    elif part == "LV_PART_MAIN":
-                        lv_state = literal(state)
-                    else:
-                        lv_state = join_enums((state, part))
-                    w.add_style(style, lv_state)
+        apply_theme_styles(w)
         await set_obj_properties(w, config)
         await add_widgets(w, config)
         await self.to_code(w, config)
@@ -230,7 +219,7 @@ class WidgetType:
         :param config: Its configuration
         """
 
-    def get_uses(self):
+    def get_uses(self) -> tuple:
         """
         Get a list of other widgets used by this one
         :return:
@@ -267,6 +256,21 @@ class WidgetType:
         """
 
 
+def apply_theme_styles(w: "Widget") -> None:
+    """Apply the current theme's styles for this widget's type"""
+    for part, states in get_theme_widget_map().get(w.type.name, {}).items():
+        part = "LV_PART_" + part.upper()
+        for state, style in states.items():
+            state = "LV_STATE_" + state.upper()
+            if state == "LV_STATE_DEFAULT":
+                lv_state = literal(part)
+            elif part == "LV_PART_MAIN":
+                lv_state = literal(state)
+            else:
+                lv_state = join_enums((state, part))
+            w.add_style(style, lv_state)
+
+
 class Widget:
     """
     Represents a Widget.

esphome/components/lvgl/widgets/lv_list.py

@@ -0,0 +1,553 @@
+from collections.abc import Generator
+from dataclasses import dataclass, field
+from typing import Any
+
+from esphome import automation
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.const import (
+    CONF_BUTTON,
+    CONF_ID,
+    CONF_INDEX,
+    CONF_ON_BOOT,
+    CONF_ON_UPDATE,
+    CONF_ON_VALUE,
+    CONF_TEXT,
+    CONF_TRIGGER_ID,
+)
+from esphome.core import CORE
+from esphome.coroutine import FakeAwaitable
+from esphome.cpp_generator import MockObj
+from esphome.schema_extractors import SCHEMA_EXTRACT, schema_extractor
+
+from ..automation import action_to_code
+from ..defines import (
+    CONF_ALIGN_TO,
+    CONF_MAIN,
+    CONF_PAD_ROW,
+    CONF_SCROLLBAR,
+    CONF_WIDGETS,
+    LV_EVENT_TRIGGERS,
+    SWIPE_TRIGGERS,
+    TYPE_FLEX,
+    add_lv_use,
+    literal,
+)
+from ..lv_validation import lv_int, lv_text, padding
+from ..lvcode import (
+    UPDATE_EVENT,
+    LocalVariable,
+    LvConditional,
+    LvCountdown,
+    lv,
+    lv_add,
+    lv_expr,
+    lv_obj,
+)
+from ..schemas import (
+    ALL_STYLES,
+    WIDGET_TYPES,
+    any_widget_schema,
+    apply_style_driven_defines,
+    container_schema_value,
+    remap_property,
+)
+from ..trigger import add_trigger
+from ..types import LV_EVENT, LvType, ObjUpdateAction, lv_obj_t
+from . import (
+    Widget,
+    WidgetType,
+    apply_theme_styles,
+    collect_parts,
+    get_widgets,
+    set_obj_properties,
+)
+from .buttonmatrix import CONF_BUTTONMATRIX
+from .canvas import CONF_CANVAS
+from .label import CONF_LABEL
+from .meter import CONF_METER
+from .tabview import CONF_TABVIEW
+from .tileview import CONF_TILEVIEW
+
+CONF_LIST = "list"
+CONF_WIDGET = "widget"
+CONF_ON_ADD = "on_add"
+CONF_ON_REMOVE = "on_remove"
+
+DOMAIN = "lvgl_list"
+
+lv_list_t = LvType("lv_list_t")
+
+
+@dataclass
+class ListTriggers:
+    on_add: list = field(default_factory=list)
+    on_remove: list = field(default_factory=list)
+
+
+def _get_list_triggers(list_id) -> ListTriggers:
+    """
+    Trigger Pvariables built for a given list's `on_add`/`on_remove` config, indexed by the
+    list's own ID.
+    """
+    triggers_by_list = CORE.data.setdefault(DOMAIN, {})
+    return triggers_by_list.setdefault(list_id, ListTriggers())
+
+
+def _get_pending_list_triggers(list_id) -> ListTriggers:
+    """
+    Same shape as _get_list_triggers(), but holding raw on_add/on_remove automation
+    configs, not yet built.
+    """
+    pending_by_list = CORE.data.setdefault(DOMAIN + "_pending", {})
+    return pending_by_list.setdefault(list_id, ListTriggers())
+
+
+def _list_triggers_completed_flag() -> list[bool]:
+    return CORE.data.setdefault(DOMAIN + "_completed", [False])
+
+
+def _list_triggers_completed_generator() -> Generator[None, None, None]:
+    while True:
+        if _list_triggers_completed_flag()[0]:
+            return
+        yield
+
+
+async def _wait_list_triggers_completed() -> None:
+    """Waits until finish_list_triggers() has built every list's on_add/on_remove automations."""
+    if _list_triggers_completed_flag()[0]:
+        return
+    await FakeAwaitable(_list_triggers_completed_generator())
+
+
+async def finish_list_triggers() -> None:
+    """
+    Builds every list's on_add/on_remove automations, collected by ListType.to_code()
+    instead of being built there directly. Must run after set_widgets_completed(True).
+    """
+    for list_id, pending in CORE.data.get(DOMAIN + "_pending", {}).items():
+        triggers = _get_list_triggers(list_id)
+        for conf in pending.on_add:
+            trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID])
+            await automation.build_automation(trigger, [(cg.int_, "list_index")], conf)
+            triggers.on_add.append(trigger)
+        for conf in pending.on_remove:
+            trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID])
+            await automation.build_automation(trigger, [(cg.int_, "list_index")], conf)
+            triggers.on_remove.append(trigger)
+    _list_triggers_completed_flag()[0] = True
+
+
+def _fire_index_triggers(triggers: list, index) -> None:
+    for trigger in triggers:
+        lv_add(trigger.trigger(index))
+
+
+async def _fire_on_add(list_id, list_obj, entry_obj) -> None:
+    await _wait_list_triggers_completed()
+    triggers = _get_list_triggers(list_id).on_add
+    if not triggers:
+        return
+    index = cg.RawExpression(f"lvgl::lv_list_get_row_index({list_obj}, {entry_obj})")
+    _fire_index_triggers(triggers, index)
+
+
+async def _fire_on_remove(list_id, index) -> None:
+    await _wait_list_triggers_completed()
+    _fire_index_triggers(_get_list_triggers(list_id).on_remove, index)
+
+
+LIST_SCHEMA = cv.Schema(
+    {
+        cv.Optional(CONF_PAD_ROW): padding,
+    }
+)
+
+LIST_CREATE_SCHEMA = LIST_SCHEMA.extend(
+    {
+        cv.Optional(CONF_ON_ADD): automation.validate_automation(
+            {
+                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(
+                    automation.Trigger.template(cg.int_)
+                ),
+            }
+        ),
+        cv.Optional(CONF_ON_REMOVE): automation.validate_automation(
+            {
+                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(
+                    automation.Trigger.template(cg.int_)
+                ),
+            }
+        ),
+    }
+)
+
+
+class ListType(WidgetType):
+    """A plain wrapper around LVGL's native `lv_list`"""
+
+    def __init__(self):
+        super().__init__(
+            CONF_LIST,
+            lv_list_t,
+            (CONF_MAIN, CONF_SCROLLBAR),
+            LIST_CREATE_SCHEMA,
+            modify_schema=LIST_SCHEMA,
+        )
+
+    def get_uses(self):
+        return TYPE_FLEX, CONF_LABEL, CONF_BUTTON
+
+    async def to_code(self, w: Widget, config: dict):
+        on_add = config.get(CONF_ON_ADD, ())
+        on_remove = config.get(CONF_ON_REMOVE, ())
+        if not on_add and not on_remove:
+            return
+        pending = _get_pending_list_triggers(w.config[CONF_ID])
+        pending.on_add.extend(on_add)
+        pending.on_remove.extend(on_remove)
+
+
+list_spec = ListType()
+
+LIST_ID_SCHEMA = cv.Schema({cv.Required(CONF_ID): cv.use_id(lv_list_t)})
+
+
+@automation.register_action(
+    "lvgl.list.add_text",
+    ObjUpdateAction,
+    LIST_ID_SCHEMA.extend(
+        {
+            cv.Required(CONF_TEXT): lv_text,
+            cv.Optional(CONF_INDEX): cv.templatable(cv.int_),
+        }
+    ),
+    synchronous=True,
+)
+async def list_add_text_to_code(config, action_id, template_arg, args):
+    widgets = await get_widgets(config)
+
+    async def do_add_text(w: Widget):
+        text = await lv_text.process(config[CONF_TEXT])
+        with LocalVariable(
+            "list_entry", lv_obj_t, lv_expr.list_add_text(w.obj, text)
+        ) as entry:
+            if (idx := config.get(CONF_INDEX)) is not None:
+                lv.obj_move_to_index(entry, await lv_int.process(idx))
+            await _fire_on_add(config[CONF_ID], w.obj, entry)
+
+    return await action_to_code(
+        widgets, do_add_text, action_id, template_arg, args, config
+    )
+
+
+_DYNAMIC_WIDGET_UNSUPPORTED = (
+    CONF_BUTTONMATRIX,
+    CONF_TABVIEW,
+    CONF_TILEVIEW,
+    CONF_METER,
+    CONF_CANVAS,
+)
+
+
+def _check_dynamic_widget_supported(w_type_name: str, w_conf: dict) -> None:
+    # Each of these allocates a Pvariable, or registers children into the global widget
+    # map, once at boot - rebuilding them on every lvgl.list.add call would break that.
+    if w_type_name in _DYNAMIC_WIDGET_UNSUPPORTED:
+        raise cv.Invalid(
+            f"'{w_type_name}' cannot be used with lvgl.list.add - it manages its own "
+            "child widgets in a way that isn't compatible with widgets created at runtime"
+        )
+    for child in w_conf.get(CONF_WIDGETS, ()):
+        [(child_type, child_conf)] = child.items()
+        _check_dynamic_widget_supported(child_type, child_conf)
+
+
+_UNSUPPORTED_DYNAMIC_KEYS = SWIPE_TRIGGERS + (CONF_ON_BOOT, CONF_ALIGN_TO)
+
+
+def _check_no_unsupported_triggers(w_type_name: str, w_conf: dict) -> None:
+    # These triggers currently aren't supporte for dynamic widgets
+    for key in _UNSUPPORTED_DYNAMIC_KEYS:
+        if key in w_conf:
+            raise cv.Invalid(
+                f"'{key}' is not supported on a widget added via lvgl.list.add - it "
+                "would validate but generate nothing, since it's only wired for "
+                "widgets that exist at boot",
+                path=[w_type_name, key],
+            )
+    for child in w_conf.get(CONF_WIDGETS, ()):
+        [(child_type, child_conf)] = child.items()
+        _check_no_unsupported_triggers(child_type, child_conf)
+
+
+def _check_no_explicit_widget_id(raw_value: dict) -> None:
+    for w_type_name, w_conf in raw_value.items():
+        if not isinstance(w_conf, dict):
+            continue
+        if CONF_ID in w_conf:
+            raise cv.Invalid(
+                "'id' is not allowed on a widget added via lvgl.list.add - it is "
+                "rebuilt fresh on every call and never registered anywhere it "
+                "could be looked up by",
+                path=[w_type_name, CONF_ID],
+            )
+        for child in w_conf.get(CONF_WIDGETS, ()):
+            if isinstance(child, dict):
+                _check_no_explicit_widget_id(child)
+
+
+@schema_extractor("schema")
+def list_add_schema(value: Any) -> Any:
+    # A plain cv.Schema can't express "id, an optional index, plus exactly one arbitrary
+    # widget-type key", since the set of widget types isn't fixed until validation time.
+    if value is SCHEMA_EXTRACT:
+        return LIST_ID_SCHEMA.extend(
+            {
+                cv.Optional(CONF_INDEX): cv.templatable(cv.int_),
+                **{
+                    cv.Optional(name): container_schema_value(widget_type)
+                    for name, widget_type in WIDGET_TYPES.items()
+                },
+            }
+        )
+    if not isinstance(value, dict):
+        raise cv.Invalid("Expected a mapping")
+    value = value.copy()
+    if CONF_ID not in value:
+        raise cv.Invalid(f"required key '{CONF_ID}' not provided")
+    with cv.prepend_path([CONF_ID]):
+        list_id = cv.use_id(lv_list_t)(value.pop(CONF_ID))
+    result = {CONF_ID: list_id}
+    if CONF_INDEX in value:
+        with cv.prepend_path([CONF_INDEX]):
+            result[CONF_INDEX] = cv.templatable(cv.int_)(value.pop(CONF_INDEX))
+    if len(value) != 1:
+        raise cv.Invalid(
+            "lvgl.list.add takes exactly one widget definition, e.g. 'label:' or 'button:', alongside 'id' and optional 'index'"
+        )
+    _check_no_explicit_widget_id(value)
+    result[CONF_WIDGET] = any_widget_schema()(value)
+    [(w_type_name, w_conf)] = result[CONF_WIDGET][0].items()
+    _check_dynamic_widget_supported(w_type_name, w_conf)
+    _check_no_unsupported_triggers(w_type_name, w_conf)
+    return result
+
+
+def _register_lv_uses(w_type_name: str, w_conf: dict) -> None:
+    # Must run before this coroutine's first await.
+    widget_type = WIDGET_TYPES[w_type_name]
+    add_lv_use(w_type_name)
+    add_lv_use(*widget_type.get_uses())
+    for child in w_conf.get(CONF_WIDGETS, ()):
+        [(child_type, child_conf)] = child.items()
+        _register_lv_uses(child_type, child_conf)
+
+
+def _register_dynamic_widget_style_uses(w_conf: dict) -> None:
+    props = {
+        remap_property(prop)
+        for part_states in collect_parts(w_conf).values()
+        for state_props in part_states.values()
+        for prop in state_props
+        if prop in ALL_STYLES
+    }
+    apply_style_driven_defines(props)
+    for child in w_conf.get(CONF_WIDGETS, ()):
+        [(_, child_conf)] = child.items()
+        _register_dynamic_widget_style_uses(child_conf)
+
+
+@automation.register_action(
+    "lvgl.list.add",
+    ObjUpdateAction,
+    list_add_schema,
+    synchronous=True,
+)
+async def list_add_to_code(config, action_id, template_arg, args):
+    [(w_type_name, w_conf)] = config[CONF_WIDGET][0].items()
+    _register_lv_uses(w_type_name, w_conf)
+    _register_dynamic_widget_style_uses(w_conf)
+    widgets = await get_widgets(config)
+
+    async def do_add(w: Widget):
+        index = None
+        if (idx := config.get(CONF_INDEX)) is not None:
+            index = await lv_int.process(idx)
+        await _build_dynamic_widget(
+            w_type_name,
+            w_conf,
+            w.obj,
+            config[CONF_ID],
+            w.obj,
+            top_level=True,
+            index=index,
+        )
+
+    return await action_to_code(widgets, do_add, action_id, template_arg, args, config)
+
+
+async def _build_dynamic_widget(
+    w_type_name: str,
+    w_conf: dict,
+    parent,
+    list_id,
+    list_obj,
+    top_level: bool = False,
+    index=None,
+    depth: int = 0,
+) -> None:
+    # Builds one widget (recursively, with children and triggers) as a LocalVariable
+    # instead of a global Pvariable. Compound
+    # widgets are heap-allocated and freed via LV_EVENT_DELETE.
+    # `depth` suffixes the local variable's name below the row's top level.
+    widget_type = WIDGET_TYPES[w_type_name]
+    var_name = f"dyn_{w_type_name}" if depth == 0 else f"dyn_{w_type_name}_{depth}"
+    add_lv_use(w_type_name)
+    add_lv_use(*widget_type.get_uses())
+
+    async def finish_and_fire(w: Widget) -> None:
+        # Shared tail for both branches below - must run while var's LocalVariable
+        # block (opened by whichever branch calls this) is still open
+        await _finish_dynamic_widget(w, w_conf, list_id, list_obj, depth)
+        if top_level:
+            if index is not None:
+                lv.obj_move_to_index(w.obj, index)
+            await _fire_on_add(list_id, list_obj, w.obj)
+
+    if widget_type.is_compound():
+        with LocalVariable(
+            var_name, widget_type.w_type, widget_type.w_type.new()
+        ) as var:
+            creator = await widget_type.obj_creator(parent, w_conf)
+            lv_add(var.set_obj(creator))
+            w = Widget(var, widget_type, w_conf)
+            lv_obj.add_event_cb(
+                w.obj,
+                literal(f"lvgl::delete_lv_compound_on_delete<{widget_type.w_type}>"),
+                literal("LV_EVENT_DELETE"),
+                var,
+            )
+            await finish_and_fire(w)
+    else:
+        creator = await widget_type.obj_creator(parent, w_conf)
+        with LocalVariable(var_name, lv_obj_t, creator) as var:
+            w = Widget(var, widget_type, w_conf)
+            await finish_and_fire(w)
+
+
+async def _finish_dynamic_widget(
+    w: Widget, w_conf: dict, list_id, list_obj, depth: int = 0
+) -> None:
+    await w.type.on_create(w.obj, w_conf)
+    apply_theme_styles(w)
+    await set_obj_properties(w, w_conf)
+    await w.type.to_code(w, w_conf)
+    await _wire_dynamic_triggers(w, w_conf)
+    for child in w_conf.get(CONF_WIDGETS, ()):
+        [(child_type, child_conf)] = child.items()
+        await _build_dynamic_widget(
+            child_type, child_conf, w.obj, list_id, list_obj, depth=depth + 1
+        )
+
+
+async def _wire_dynamic_triggers(w: Widget, config: dict) -> None:
+    # Mirrors generate_triggers(), but runs immediately
+    if w.type.is_compound():
+        event_var = MockObj(
+            f"static_cast<{w.type.w_type} *>(lv_event_get_user_data(event))", "->"
+        )
+        user_data = w.var
+    else:
+        event_var = literal("static_cast<lv_obj_t *>(lv_event_get_target(event))")
+        user_data = None
+    event_target = Widget(event_var, w.type, config)
+    for event, conf in {
+        event: conf for event, conf in config.items() if event in LV_EVENT_TRIGGERS
+    }.items():
+        w.add_flag("LV_OBJ_FLAG_CLICKABLE")
+        await add_trigger(
+            conf[0], event_target, event, attach_obj=w.obj, user_data=user_data
+        )
+    for conf in config.get(CONF_ON_VALUE, ()):
+        await add_trigger(
+            conf,
+            event_target,
+            LV_EVENT.VALUE_CHANGED,
+            UPDATE_EVENT,
+            attach_obj=w.obj,
+            user_data=user_data,
+        )
+    for conf in config.get(CONF_ON_UPDATE, ()):
+        await add_trigger(
+            conf, event_target, UPDATE_EVENT, attach_obj=w.obj, user_data=user_data
+        )
+
+
+LIST_REMOVE_SCHEMA = LIST_ID_SCHEMA.extend(
+    {
+        # positive_int, not int_: a negative index would silently delete the *last*
+        # row (lv_obj_get_child() counts back from the end) while reporting that
+        # same bogus value to on_remove's list_index.
+        cv.Required(CONF_INDEX): cv.templatable(cv.positive_int),
+    }
+)
+
+
+@automation.register_action(
+    "lvgl.list.remove",
+    ObjUpdateAction,
+    LIST_REMOVE_SCHEMA,
+    synchronous=True,
+)
+async def list_remove_to_code(config, action_id, template_arg, args):
+    widgets = await get_widgets(config)
+
+    async def do_remove(w: Widget):
+        index = await lv_int.process(config[CONF_INDEX])
+        # Materialised into a local since index is needed at two call sites below, and
+        # a lambda's body gets re-emitted (and re-run) at every point it's used.
+        with (
+            LocalVariable("list_index", cg.int_, index, modifier="") as idx,
+            # Out-of-range lookup/log lives in a shared C++ helper, not inline here:
+            # a config can have many lvgl.list.remove call sites.
+            LocalVariable(
+                "list_child",
+                lv_obj_t,
+                cg.RawExpression(f"lvgl::lv_list_get_row_for_remove({w.obj}, {idx})"),
+            ) as child,
+            LvConditional(child),
+        ):
+            await _fire_on_remove(config[CONF_ID], idx)
+            # Recursively destroys the whole subtree
+            lv.obj_del(child)
+
+    return await action_to_code(
+        widgets, do_remove, action_id, template_arg, args, config
+    )
+
+
+@automation.register_action(
+    "lvgl.list.clear",
+    ObjUpdateAction,
+    LIST_ID_SCHEMA,
+    synchronous=True,
+)
+async def list_clear_to_code(config, action_id, template_arg, args):
+    widgets = await get_widgets(config)
+
+    async def do_clear(w: Widget):
+        await _wait_list_triggers_completed()
+        triggers = _get_list_triggers(config[CONF_ID]).on_remove
+        if triggers:
+            # Fire on_remove for every entry, newest to oldest, before wiping them all out,
+            # so on_remove's semantics ("an entry left the list") hold
+            with LvCountdown("list_index", lv_expr.obj_get_child_count(w.obj)) as index:
+                _fire_index_triggers(triggers, index)
+        # lv_obj_clean recursively destroys every child's whole subtree
+        lv.obj_clean(w.obj)
+
+    return await action_to_code(
+        widgets, do_clear, action_id, template_arg, args, config
+    )

esphome/components/lvgl/widgets/table.py

@@ -0,0 +1,280 @@
+from contextlib import ExitStack
+
+from esphome import automation
+import esphome.codegen as cg
+from esphome.components.const import CONF_ROWS
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_ITEMS, CONF_ROW, CONF_TEXT, CONF_WIDTH
+from esphome.core import ID
+from esphome.cpp_generator import MockObj, TemplateArgsType
+from esphome.schema_extractors import SCHEMA_EXTRACT
+from esphome.types import ConfigFragmentType, ConfigType, SafeExpType
+
+from ..automation import action_to_code
+from ..defines import CONF_COLUMN, CONF_MAIN, LValidator, literal
+from ..lv_validation import lv_int, lv_text, pixels_or_percent, pixels_validator
+from ..lvcode import LocalVariable, lv, lv_add, lv_expr
+from ..types import LvCompound, LvType, ObjUpdateAction, lv_coord_t
+from . import Widget, WidgetType, get_widgets
+from .label import CONF_LABEL
+
+CONF_TABLE = "table"
+CONF_CELLS = "cells"
+CONF_COLUMNS = "columns"
+CONF_ROW_COUNT = "row_count"
+CONF_COLUMN_COUNT = "column_count"
+CONF_MERGE_RIGHT = "merge_right"
+CONF_TEXT_CROP = "text_crop"
+CONF_SELECTED_ROW = "selected_row"
+CONF_SELECTED_COLUMN = "selected_column"
+
+CELL_SCHEMA = cv.Schema(
+    {
+        cv.Optional(CONF_TEXT, default=""): lv_text,
+        # Not templatable: the value selects between two different LVGL calls
+        # (set/clear cell ctrl), so a runtime lambda can't be mapped to a single call.
+        cv.Optional(CONF_MERGE_RIGHT): cv.boolean,
+        cv.Optional(CONF_TEXT_CROP): cv.boolean,
+    }
+)
+
+# A cell can be given as a bare piece of text, or a dict for more control
+TABLE_CELL_SCHEMA = cv.maybe_simple_value(CELL_SCHEMA, key=CONF_TEXT)
+
+# A row can be given as a bare list of cells, or a dict for future extension
+ROW_SCHEMA = cv.maybe_simple_value(
+    cv.Schema({cv.Required(CONF_CELLS): cv.ensure_list(TABLE_CELL_SCHEMA)}),
+    key=CONF_CELLS,
+)
+
+
+def _column_width_validator(value: ConfigFragmentType) -> int | float | list[str]:
+    """Like pixels_or_percent, but rejects negative widths, which would
+    defeat the 100%-total check and wrap around in the generated uint8_t pct."""
+    if value == SCHEMA_EXTRACT:
+        return ["pixels", "..%"]
+    return cv.Any(pixels_validator, cv.percentage)(value)
+
+
+column_width = LValidator(
+    _column_width_validator,
+    lv_coord_t,
+    retmapper=pixels_or_percent.retmapper,
+    animatable=True,
+)
+
+COLUMN_SCHEMA = cv.Schema(
+    {
+        cv.Optional(CONF_WIDTH): column_width,
+    }
+)
+
+
+def _validate_table(config: ConfigType) -> ConfigType:
+    rows = config.get(CONF_ROWS)
+    min_row_count = len(rows) if rows else 0
+    min_column_count = max(len(row[CONF_CELLS]) for row in rows) if rows else 0
+    row_count = config.get(CONF_ROW_COUNT)
+    if row_count is not None and row_count < min_row_count:
+        raise cv.Invalid(
+            f"{CONF_ROW_COUNT} must be at least {min_row_count} to hold all the given rows",
+            path=[CONF_ROW_COUNT],
+        )
+    column_count = config.get(CONF_COLUMN_COUNT)
+    if column_count is not None and column_count < min_column_count:
+        raise cv.Invalid(
+            f"{CONF_COLUMN_COUNT} must be at least {min_column_count} to hold all the cells in a row",
+            path=[CONF_COLUMN_COUNT],
+        )
+    column_count = column_count if column_count is not None else min_column_count
+    columns = config.get(CONF_COLUMNS)
+    if columns and column_count and len(columns) > column_count:
+        raise cv.Invalid(
+            f"{CONF_COLUMNS} defines {len(columns)} columns, but the table has only {column_count}",
+            path=[CONF_COLUMNS],
+        )
+    total_pct = sum(
+        width
+        for column in columns or ()
+        if isinstance((width := column.get(CONF_WIDTH)), float)
+    )
+    if total_pct > 1.0:
+        raise cv.Invalid(
+            f"{CONF_COLUMNS} percentage widths add up to {total_pct * 100:.0f}%, which exceeds 100%",
+            path=[CONF_COLUMNS],
+        )
+    return config
+
+
+TABLE_SCHEMA = cv.Schema(
+    {
+        cv.Optional(CONF_ROWS): cv.ensure_list(ROW_SCHEMA),
+        cv.Optional(CONF_ROW_COUNT): cv.positive_int,
+        cv.Optional(CONF_COLUMN_COUNT): cv.positive_int,
+        cv.Optional(CONF_COLUMNS): cv.ensure_list(COLUMN_SCHEMA),
+        cv.Optional(CONF_SELECTED_ROW): lv_int,
+        cv.Optional(CONF_SELECTED_COLUMN): lv_int,
+    }
+).add_extra(_validate_table)
+
+lv_table_t = LvType(
+    "LvTableType",
+    parents=(LvCompound,),
+    largs=[(cg.uint32, "row"), (cg.uint32, "column")],
+    lvalue=lambda w: [
+        lv_expr.table_get_selected_row(w.obj),
+        lv_expr.table_get_selected_column(w.obj),
+    ],
+    has_on_value=True,
+)
+
+
+async def set_cell_ctrl(
+    w: Widget, row: SafeExpType, column: SafeExpType, cell: ConfigType
+) -> None:
+    for key, ctrl in (
+        (CONF_MERGE_RIGHT, "LV_TABLE_CELL_CTRL_MERGE_RIGHT"),
+        (CONF_TEXT_CROP, "LV_TABLE_CELL_CTRL_TEXT_CROP"),
+    ):
+        if key not in cell:
+            continue
+        if cell[key]:
+            lv.table_set_cell_ctrl(w.obj, row, column, literal(ctrl))
+        else:
+            lv.table_clear_cell_ctrl(w.obj, row, column, literal(ctrl))
+
+
+async def set_selected_cell(w: Widget, config: ConfigType) -> None:
+    selected_row = config.get(CONF_SELECTED_ROW)
+    selected_column = config.get(CONF_SELECTED_COLUMN)
+    if selected_row is None and selected_column is None:
+        return
+    # LV_TABLE_CELL_NONE selects the whole column/row when only one index is given
+    row_value = (
+        await lv_int.process(selected_row)
+        if selected_row is not None
+        else literal("LV_TABLE_CELL_NONE")
+    )
+    column_value = (
+        await lv_int.process(selected_column)
+        if selected_column is not None
+        else literal("LV_TABLE_CELL_NONE")
+    )
+    lv.table_set_selected_cell(w.obj, row_value, column_value)
+
+
+TABLE_MODIFY_SCHEMA = cv.Schema(
+    {
+        cv.Optional(CONF_SELECTED_ROW): lv_int,
+        cv.Optional(CONF_SELECTED_COLUMN): lv_int,
+    }
+)
+
+
+class TableType(WidgetType):
+    def __init__(self):
+        super().__init__(
+            CONF_TABLE,
+            lv_table_t,
+            (CONF_MAIN, CONF_ITEMS),
+            TABLE_SCHEMA,
+            modify_schema=TABLE_MODIFY_SCHEMA,
+        )
+
+    def get_uses(self) -> tuple[str]:
+        return (CONF_LABEL,)
+
+    async def to_code(self, w: Widget, config: dict) -> None:
+        rows = config.get(CONF_ROWS)
+        row_count = config.get(CONF_ROW_COUNT)
+        column_count = config.get(CONF_COLUMN_COUNT)
+        if rows is not None:
+            if row_count is None:
+                row_count = len(rows)
+            if column_count is None:
+                column_count = max((len(row[CONF_CELLS]) for row in rows), default=0)
+        if row_count is not None:
+            lv.table_set_row_count(w.obj, row_count)
+        if column_count is not None:
+            lv.table_set_column_count(w.obj, column_count)
+        columns = config.get(CONF_COLUMNS, ())
+        pct_column_count = sum(
+            1 for column in columns if isinstance(column.get(CONF_WIDTH), float)
+        )
+        if pct_column_count:
+            lv_add(w.var.init_column_pct(pct_column_count))
+        for index, column in enumerate(columns):
+            if (width := column.get(CONF_WIDTH)) is None:
+                continue
+            if isinstance(width, float):
+                # A percentage: column_width validation leaves it as a 0.0-1.0
+                # fraction. LVGL's table widget only accepts a literal pixel width, so
+                # the actual width is recomputed at runtime from the table's own size.
+                lv_add(w.var.add_column_width_pct(index, round(width * 100)))
+            else:
+                lv.table_set_column_width(
+                    w.obj, index, await column_width.process(width)
+                )
+        for row_index, row in enumerate(rows or ()):
+            for column_index, cell in enumerate(row[CONF_CELLS]):
+                lv.table_set_cell_value(
+                    w.obj,
+                    row_index,
+                    column_index,
+                    await lv_text.process(cell[CONF_TEXT]),
+                )
+                await set_cell_ctrl(w, row_index, column_index, cell)
+        await set_selected_cell(w, config)
+
+
+table_spec = TableType()
+
+
+@automation.register_action(
+    "lvgl.table.cell.update",
+    ObjUpdateAction,
+    cv.Schema(
+        {
+            cv.Required(CONF_ID): cv.use_id(lv_table_t),
+            cv.Required(CONF_ROW): lv_int,
+            cv.Required(CONF_COLUMN): lv_int,
+            cv.Optional(CONF_TEXT): lv_text,
+            cv.Optional(CONF_MERGE_RIGHT): cv.boolean,
+            cv.Optional(CONF_TEXT_CROP): cv.boolean,
+        }
+    ).add_extra(cv.has_at_least_one_key(CONF_TEXT, CONF_MERGE_RIGHT, CONF_TEXT_CROP)),
+    synchronous=True,
+)
+async def table_cell_update_to_code(
+    config: ConfigType,
+    action_id: ID,
+    template_arg: cg.TemplateArguments,
+    args: TemplateArgsType,
+) -> MockObj:
+    widgets = await get_widgets(config)
+
+    async def do_update(w: Widget):
+        row = await lv_int.process(config[CONF_ROW])
+        column = await lv_int.process(config[CONF_COLUMN])
+        fields_set = sum(
+            key in config for key in (CONF_TEXT, CONF_MERGE_RIGHT, CONF_TEXT_CROP)
+        )
+        with ExitStack() as stack:
+            if fields_set > 1:
+                # row/column feed more than one generated call below: cache them in
+                # local variables so a !lambda value is only evaluated once.
+                row = stack.enter_context(
+                    LocalVariable("row", cg.int_, row, modifier="")
+                )
+                column = stack.enter_context(
+                    LocalVariable("column", cg.int_, column, modifier="")
+                )
+            if CONF_TEXT in config:
+                lv.table_set_cell_value(
+                    w.obj, row, column, await lv_text.process(config[CONF_TEXT])
+                )
+            await set_cell_ctrl(w, row, column, config)
+
+    return await action_to_code(
+        widgets, do_update, action_id, template_arg, args, config
+    )

esphome/components/mdns/mdns_esp8266.cpp

@@ -41,7 +41,19 @@ static void register_esp8266(MDNSComponent *, StaticVector<MDNSService, MDNS_SER
 #ifdef USE_MDNS_EVENT_DRIVEN_POLLING
 void MDNSComponent::start_polling_window_() {
   // uint32_t-ID set_interval/set_timeout already does atomic cancel-and-add.
-  this->set_interval(MDNS_POLL_ID, MDNS_UPDATE_INTERVAL_MS, []() { MDNS.update(); });
+  this->set_interval(MDNS_POLL_ID, MDNS_UPDATE_INTERVAL_MS, []() {
+#ifdef USE_MDNS_WIFI_LISTENER
+    // MDNS.update() can suspend the loop in UdpContext::sendTimeout() while a send is
+    // failing (radio off-channel during a roam scan, or mid reconnect); an incoming
+    // packet then re-enters LEAmDNS from lwIP and corrupts shared UdpContext state.
+    // Skip the tick while the radio cannot transmit (#18760), but keep polling while
+    // the AP is serving clients (AP-only or fallback AP with the STA down).
+    auto *wifi = wifi::global_wifi_component;
+    if (wifi->is_roaming() || (!wifi->is_connected() && !wifi->is_ap_active()))
+      return;
+#endif
+    MDNS.update();
+  });
   this->set_timeout(MDNS_POLL_STOP_ID, MDNS_POLL_WINDOW_MS, [this]() { this->cancel_interval(MDNS_POLL_ID); });
 }
 #endif

esphome/components/mipi_rgb/mipi_rgb.cpp

@@ -345,7 +345,7 @@ int MipiRgb::get_height() {
   }
 }
 
-static const char *get_pin_name(GPIOPin *pin, std::span<char, GPIO_SUMMARY_MAX_LEN> buffer) {
+[[maybe_unused]] static const char *get_pin_name(GPIOPin *pin, std::span<char, GPIO_SUMMARY_MAX_LEN> buffer) {
   if (pin == nullptr)
     return "None";
   pin->dump_summary(buffer.data(), buffer.size());

esphome/components/mipi_spi/models/jc.py

@@ -266,8 +266,6 @@ DriverChip(
     "JC3636W518V2",
     height=360,
     width=360,
-    offset_height=1,
-    draw_rounding=1,
     cs_pin=10,
     reset_pin=47,
     invert_colors=True,

esphome/components/mitsubishi_cn105/mitsubishi_cn105.cpp

@@ -49,6 +49,13 @@ void MitsubishiCN105::initialize() { this->set_state_(State::CONNECTING); }
 
 bool MitsubishiCN105::update() {
   switch (this->state_) {
+    case State::DEFERRED_STATUS_REQUEST:
+      // Defer the next request to a later loop iteration; some units might not respond if a request is sent
+      // immediately after a response. See https://github.com/esphome/esphome/issues/18099. No minimum RX-to-TX delay
+      // is enforced.
+      this->set_state_(State::UPDATING_STATUS);
+      return false;
+
     case State::WAITING_FOR_SCHEDULED_STATUS_UPDATE:
       if (this->pending_updates_.any()) {
         this->status_update_wait_credit_ms_ =
@@ -101,12 +108,14 @@ bool MitsubishiCN105::should_transition(State from, State to) {
       return from == State::CONNECTING;
 
     case State::UPDATING_STATUS:
-      return from == State::CONNECTED || from == State::STATUS_UPDATED ||
-             from == State::WAITING_FOR_SCHEDULED_STATUS_UPDATE;
+      return from == State::DEFERRED_STATUS_REQUEST || from == State::WAITING_FOR_SCHEDULED_STATUS_UPDATE;
 
     case State::STATUS_UPDATED:
       return from == State::UPDATING_STATUS;
 
+    case State::DEFERRED_STATUS_REQUEST:
+      return from == State::CONNECTED || from == State::STATUS_UPDATED;
+
     case State::SCHEDULE_NEXT_STATUS_UPDATE:
       return from == State::STATUS_UPDATED || from == State::SETTINGS_APPLIED;
 
@@ -114,7 +123,7 @@ bool MitsubishiCN105::should_transition(State from, State to) {
       return from == State::SCHEDULE_NEXT_STATUS_UPDATE;
 
     case State::APPLYING_SETTINGS:
-      return from == State::WAITING_FOR_SCHEDULED_STATUS_UPDATE || from == State::STATUS_UPDATED;
+      return from == State::WAITING_FOR_SCHEDULED_STATUS_UPDATE;
 
     case State::SETTINGS_APPLIED:
       return from == State::APPLYING_SETTINGS;
@@ -122,9 +131,10 @@ bool MitsubishiCN105::should_transition(State from, State to) {
     case State::READ_TIMEOUT:
       return from == State::UPDATING_STATUS || from == State::APPLYING_SETTINGS || from == State::CONNECTING;
 
-    default:
+    case State::NOT_CONNECTED:
       return false;
   }
+  return false;
 }
 
 void MitsubishiCN105::did_transition_(State to) {
@@ -135,7 +145,7 @@ void MitsubishiCN105::did_transition_(State to) {
 
     case State::CONNECTED:
       this->current_status_msg_type_ = STATUS_MSG_SETTINGS;
-      this->set_state_(State::UPDATING_STATUS);
+      this->set_state_(State::DEFERRED_STATUS_REQUEST);
       break;
 
     case State::UPDATING_STATUS:
@@ -143,11 +153,14 @@ void MitsubishiCN105::did_transition_(State to) {
       break;
 
     case State::STATUS_UPDATED: {
-      if (this->pending_updates_.any() && this->is_status_initialized()) {
-        this->set_state_(State::APPLYING_SETTINGS);
-      } else if (this->current_status_msg_type_ == STATUS_MSG_SETTINGS && this->should_request_telemetry_()) {
+      // When present, pending settings are applied from WAITING_FOR_SCHEDULED_STATUS_UPDATE during the next update(),
+      // deferring transmission to a later loop iteration; some units might not respond if a request is sent
+      // immediately after a response, causing the request to time out.
+      const bool should_apply_pending_settings = this->pending_updates_.any() && this->is_status_initialized();
+      if (!should_apply_pending_settings && this->current_status_msg_type_ == STATUS_MSG_SETTINGS &&
+          this->should_request_telemetry_()) {
         this->current_status_msg_type_ = STATUS_MSG_TELEMETRY;
-        this->set_state_(State::UPDATING_STATUS);
+        this->set_state_(State::DEFERRED_STATUS_REQUEST);
       } else {
         this->set_state_(State::SCHEDULE_NEXT_STATUS_UPDATE);
       }
@@ -175,7 +188,9 @@ void MitsubishiCN105::did_transition_(State to) {
       this->set_state_(State::CONNECTING);
       break;
 
-    default:
+    case State::NOT_CONNECTED:
+    case State::DEFERRED_STATUS_REQUEST:
+    case State::WAITING_FOR_SCHEDULED_STATUS_UPDATE:
       break;
   }
 }
@@ -359,6 +374,8 @@ const LogString *MitsubishiCN105::state_to_string(State state) {
       return LOG_STR("UpdatingStatus");
     case State::STATUS_UPDATED:
       return LOG_STR("StatusUpdated");
+    case State::DEFERRED_STATUS_REQUEST:
+      return LOG_STR("DeferredStatusRequest");
     case State::SCHEDULE_NEXT_STATUS_UPDATE:
       return LOG_STR("ScheduleNextStatusUpdate");
     case State::WAITING_FOR_SCHEDULED_STATUS_UPDATE:

esphome/components/mitsubishi_cn105/mitsubishi_cn105.h

@@ -101,6 +101,7 @@ class MitsubishiCN105 {
     CONNECTED,
     UPDATING_STATUS,
     STATUS_UPDATED,
+    DEFERRED_STATUS_REQUEST,
     SCHEDULE_NEXT_STATUS_UPDATE,
     WAITING_FOR_SCHEDULED_STATUS_UPDATE,
     APPLYING_SETTINGS,

esphome/components/modbus/__init__.py

@@ -45,6 +45,7 @@ ModbusClient = modbus_ns.class_("ModbusClientHub", Modbus)
 ModbusDevice = modbus_ns.class_("ModbusDevice")
 ModbusClientDevice = modbus_ns.class_("ModbusClientDevice")
 ModbusServerDevice = modbus_ns.class_("ModbusServerDevice")
+CommandOptions = modbus_ns.struct("CommandOptions")
 MULTI_CONF = True
 
 CONF_ROLE = "role"
@@ -81,6 +82,19 @@ def _command_options(direction: str) -> list[_CommandOption]:
         raise ValueError(f"unknown command-options direction {direction!r}") from None
 
 
+# The write (mutating) function codes, matching modbus::helpers::is_function_code_write(). 0x17
+# (read/write multiple) is included: it mutates, so the hub treats it as a write despite its read half.
+_WRITE_FUNCTION_CODES = frozenset({0x05, 0x06, 0x0F, 0x10, 0x16, 0x17})
+
+
+def is_function_code_write(function_code: int) -> bool:
+    """True if the Modbus function code writes (mutates). The exception bit (0x80) is masked off first,
+    so an exception-flagged code still classifies by its base code - stricter than the runtime hub,
+    whose classify() treats an exception-flagged code as a read. Keep in sync with
+    modbus::helpers::is_function_code_write()."""
+    return function_code & 0x7F in _WRITE_FUNCTION_CODES
+
+
 def command_options_schema(
     *, direction: Literal["read", "write"], templatable: bool = False
 ) -> dict[cv.Optional, Any]:
@@ -98,6 +112,25 @@ def command_options_schema(
     }
 
 
+def command_options_expression(
+    config: ConfigType, *, direction: Literal["read", "write"]
+) -> cg.StructInitializer:
+    """Build the modbus::CommandOptions initializer for a config validated with
+    command_options_schema() of the same direction. For static (non-templatable) options only;
+    actions with lambda values use register_templatable_command_options() instead.
+    """
+    return cg.StructInitializer(
+        CommandOptions,
+        *(
+            # Construct the value as its declared cpp_type, so a future non-bool option (enum,
+            # uint16_t, ...) is emitted with the right type instead of whatever safe_exp() infers.
+            (option.field, option.cpp_type(config[option.conf_key]))
+            for option in _command_options(direction)
+            if option.conf_key in config
+        ),
+    )
+
+
 async def register_templatable_command_options(
     var: MockObj, config: ConfigType, args: TemplateArgsType, direction: str
 ) -> None:

esphome/components/modbus/helpers.py

@@ -3,6 +3,9 @@ import esphome.codegen as cg
 modbus_ns = cg.esphome_ns.namespace("modbus")
 modbus_helpers_ns = modbus_ns.namespace("helpers")
 
+RegisterValues = modbus_ns.class_("RegisterValues")
+PduBuffer = modbus_helpers_ns.class_("PduBuffer")
+
 FunctionCode_ns = modbus_ns.namespace("FunctionCode")
 FunctionCode = FunctionCode_ns.enum("FunctionCode")
 

esphome/components/modbus_client/__init__.py

@@ -157,10 +157,6 @@ _ACTION_BASE_SCHEMA = cv.Schema(
     }
 )
 
-# The write codes recognised by modbus::helpers::is_function_code_write() - keep in sync. 0x17
-# (read/write multiple) is included: it mutates, so the hub treats it as a write despite its read half.
-_WRITE_FUNCTION_CODES = frozenset({0x05, 0x06, 0x0F, 0x10, 0x16, 0x17})
-
 
 def _no_continuous_on_write(config: ConfigType) -> ConfigType:
     """Reject `continuous: true` on a static write PDU: continuous polling only applies to reads.
@@ -170,9 +166,7 @@ def _no_continuous_on_write(config: ConfigType) -> ConfigType:
     if (
         isinstance(pdu, list)
         and config.get(CONF_CONTINUOUS) is True
-        # Masking the exception bit (0x90 -> 0x10) makes this check stricter than the runtime hub,
-        # whose classify() treats an exception-flagged code as a read and leaves continuous in place.
-        and pdu[0] & 0x7F in _WRITE_FUNCTION_CODES
+        and modbus.is_function_code_write(pdu[0])
     ):
         raise cv.Invalid(
             f"'{CONF_CONTINUOUS}: true' does not apply to a write PDU (function code "

esphome/components/modbus_controller/__init__.py

@@ -11,7 +11,14 @@ from esphome.components.modbus.helpers import (
     EntityType,
 )
 import esphome.config_validation as cv
-from esphome.const import CONF_ADDRESS, CONF_ID, CONF_LAMBDA, CONF_NAME, CONF_OFFSET
+from esphome.const import (
+    CONF_ADDRESS,
+    CONF_CONTINUOUS,
+    CONF_ID,
+    CONF_LAMBDA,
+    CONF_NAME,
+    CONF_OFFSET,
+)
 from esphome.core import CORE
 from esphome.cpp_helpers import logging
 import esphome.final_validate as fv
@@ -125,6 +132,7 @@ CONFIG_SCHEMA = cv.All(
             ),
             cv.Optional(CONF_MAX_CMD_RETRIES, default=4): cv.positive_int,
             cv.Optional(CONF_OFFLINE_SKIP_UPDATES, default=0): cv.positive_int,
+            **modbus.command_options_schema(direction="read"),
             cv.Optional(
                 CONF_SERVER_REGISTERS,
             ): cv.invalid(
@@ -183,7 +191,7 @@ ModbusItemBaseSchema = cv.Schema(
 )
 
 
-def validate_modbus_register(config):
+def validate_modbus_register(config: ConfigType) -> ConfigType:
     # custom_command is the deprecated alias for custom_pdu (migrated later in final validate); treat
     # either as "a custom frame is configured" so the address/register_type rules match.
     has_custom = CONF_CUSTOM_PDU in config or CONF_CUSTOM_COMMAND in config
@@ -234,6 +242,35 @@ def migrate_custom_command(config: ConfigType) -> None:
     del config[CONF_CUSTOM_COMMAND]
 
 
+def _reject_continuous_write_custom_pdu(config: ConfigType) -> None:
+    """Final-validate: a custom_pdu whose function code writes (e.g. 0x17 read/write-multiple) cannot be
+    polled continuously - the hub ignores continuous for mutating codes and would warn on every update
+    while that range silently does not stream. Reject the combination instead. Runs after
+    migrate_custom_command, so it sees custom_pdu whether written directly or migrated from
+    custom_command."""
+    pdu = config.get(CONF_CUSTOM_PDU)
+    if pdu is None or not modbus.is_function_code_write(pdu[0]):
+        return
+    fconf = fv.full_config.get()
+    path = fconf.get_path_for_id(config[CONF_MODBUS_CONTROLLER_ID])[:-1]
+    controller = fconf.get_config_for_path(path)
+    if controller.get(CONF_CONTINUOUS) is True:
+        raise cv.Invalid(
+            f"a '{CONF_CUSTOM_PDU}' with a write function code (0x{pdu[0] & 0x7F:02X}) can't be polled "
+            f"continuously: the hub ignores 'continuous' for mutating codes. Remove 'continuous: true' "
+            f"from the '{controller[CONF_ID]}' modbus_controller, or use a read function code.",
+            [CONF_CUSTOM_PDU],
+        )
+
+
+def validate_custom_pdu_item(config: ConfigType) -> None:
+    """Final-validate for the read platforms that accept custom_pdu (sensor, binary_sensor,
+    text_sensor): migrate the deprecated custom_command, then reject a write-coded custom_pdu under a
+    continuously-polling controller."""
+    migrate_custom_command(config)
+    _reject_continuous_write_custom_pdu(config)
+
+
 def _final_validate(config: ConfigType) -> None:
     modbus.final_validate_modbus_device("modbus_controller", role="client")(config)
 
@@ -241,7 +278,7 @@ def _final_validate(config: ConfigType) -> None:
 FINAL_VALIDATE_SCHEMA = _final_validate
 
 
-def modbus_calc_properties(config):
+def modbus_calc_properties(config: ConfigType) -> tuple[int, int]:
     byte_offset = 0
     reg_count = 0
     if CONF_OFFSET in config:
@@ -270,8 +307,12 @@ def modbus_calc_properties(config):
 
 
 async def add_modbus_base_properties(
-    var, config, sensor_type, lambda_param_type=cg.float_, lambda_return_type=float
-):
+    var: cg.MockObj,
+    config: ConfigType,
+    sensor_type: cg.MockObjClass,
+    lambda_param_type: cg.MockObj = cg.float_,
+    lambda_return_type: Any = float,
+) -> None:
     if CONF_CUSTOM_PDU in config:
         cg.add(var.set_custom_pdu(config[CONF_CUSTOM_PDU]))
 
@@ -310,21 +351,34 @@ _CALLBACK_AUTOMATIONS = (
 )
 
 
-async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+async def to_code(config: ConfigType) -> None:
+    # Await the hub first, so no entity can bind to a controller that doesn't have one yet.
+    hub = await cg.get_variable(config[modbus.CONF_MODBUS_ID])
+    var = cg.new_Pvariable(config[CONF_ID], hub, config[CONF_ADDRESS])
+    await cg.register_component(var, config)
     cg.add(var.set_max_cmd_retries(config[CONF_MAX_CMD_RETRIES]))
     cg.add(var.set_offline_skip_updates(config[CONF_OFFLINE_SKIP_UPDATES]))
-    await register_modbus_device(var, config)
+    cg.add(
+        var.set_read_options(
+            modbus.command_options_expression(config, direction="read")
+        )
+    )
     await automation.build_callback_automations(var, config, _CALLBACK_AUTOMATIONS)
 
 
-async def register_modbus_device(var, config):
+async def register_modbus_device(var: cg.MockObj, config: ConfigType) -> cg.MockObj:
+    # Remove before 2027.3.0
+    _LOGGER.warning(
+        "'modbus_controller.register_modbus_device' is deprecated, use "
+        "'modbus.register_modbus_client_device' and set the address on your own "
+        "class instead. Will be removed in 2027.3.0"
+    )
     cg.add(var.set_address(config[CONF_ADDRESS]))
     await cg.register_component(var, config)
     return await modbus.register_modbus_client_device(var, config)
 
 
-def function_code_to_register(function_code):
+def function_code_to_register(function_code: str) -> cg.MockObj:
     FUNCTION_CODE_TYPE_MAP = {
         "read_coils": EntityType.COIL,
         "read_discrete_inputs": EntityType.DISCRETE_INPUT,

esphome/components/modbus_controller/binary_sensor/__init__.py

@@ -8,9 +8,9 @@ from .. import (
     ModbusItemBaseSchema,
     SensorItem,
     add_modbus_base_properties,
-    migrate_custom_command,
     modbus_calc_properties,
     modbus_controller_ns,
+    validate_custom_pdu_item,
     validate_modbus_register,
 )
 from ..const import (
@@ -40,7 +40,7 @@ CONFIG_SCHEMA = cv.All(
     validate_modbus_register,
 )
 
-FINAL_VALIDATE_SCHEMA = migrate_custom_command
+FINAL_VALIDATE_SCHEMA = validate_custom_pdu_item
 
 
 async def to_code(config):

esphome/components/modbus_controller/modbus_controller.cpp

@@ -10,6 +10,73 @@ static const char *const TAG = "modbus_controller";
 
 void ModbusController::setup() { this->create_polling_commands_(); }
 
+void WriterDevice::warn_write_buffer_deprecated(const LogString *platform, uint16_t address) {
+  if (this->write_buffer_deprecated_warned_)
+    return;
+  this->write_buffer_deprecated_warned_ = true;
+  ESP_LOGW(TAG,
+           "Modbus %s (address 0x%X): filling the write_lambda buffer parameter is deprecated; call a write helper / "
+           "queue_pdu() on the entity (item) instead. The buffer parameter is removed in 2027.3.0",
+           LOG_STR_ARG(platform), address);
+}
+
+bool WriterDevice::send_raw_frame_deprecated(std::span<const uint8_t> frame) {
+  if (frame.empty())
+    return false;
+  this->dispatched_ = true;
+  return this->parent_->queue_pdu(frame[0], frame.subspan(1), this);
+}
+
+void WriterDevice::set_controller(ModbusController *controller) {
+  this->controller_ = controller;
+  this->set_parent(controller->hub());
+  this->set_address(controller->device_address());
+}
+
+void WriterDevice::notify_online_(std::span<const uint8_t> request_pdu) {
+  if (this->controller_ != nullptr)
+    this->controller_->set_online(true, fc_of(request_pdu), addr_of(request_pdu));
+}
+
+void WriterDevice::on_response(std::span<const uint8_t> request_pdu, std::span<const uint8_t> response_pdu) {
+  this->notify_online_(request_pdu);
+  this->dispatch_response_(request_pdu, response_pdu, std::nullopt);
+}
+
+void WriterDevice::on_error(std::span<const uint8_t> request_pdu, modbus::ExceptionCode exception_code) {
+  ESP_LOGW(TAG, "Modbus error function code: 0x%X register 0x%X exception: %d", fc_of(request_pdu),
+           addr_of(request_pdu), static_cast<uint8_t>(exception_code));
+  this->notify_online_(request_pdu);  // an exception is still a legitimate reply -> device is online
+  this->dispatch_response_(request_pdu, {}, exception_code);
+}
+
+// Fired once per wire transmission (including hub re-queues from a retry), so the on_command_sent trigger
+// reflects when the frame actually went out, not when it was queued.
+void WriterDevice::on_sent(std::span<const uint8_t> request_pdu) {
+  if (this->controller_ != nullptr)
+    this->controller_->command_sent(fc_of(request_pdu), addr_of(request_pdu));
+}
+
+void WriterDevice::on_not_sent(std::span<const uint8_t> request_pdu) {
+  // Only the offline teardown reaches this (a supersede retires silently), so the frame is genuinely
+  // lost; a dropped write was already published optimistically, so surface it.
+  if (modbus::helpers::is_function_code_write(fc_of(request_pdu))) {
+    ESP_LOGW(TAG, "Write not sent: function 0x%X register 0x%X", fc_of(request_pdu), addr_of(request_pdu));
+  } else {
+    ESP_LOGD(TAG, "Request not sent: function 0x%X register 0x%X", fc_of(request_pdu), addr_of(request_pdu));
+  }
+}
+
+bool WriterDevice::on_no_response(std::span<const uint8_t> request_pdu) {
+  if (this->controller_ == nullptr)
+    return false;
+  this->controller_->increment_non_response_count();
+  if (this->controller_->can_send())
+    return true;  // the hub re-queues the frame it is holding; on_sent fires again on the retry
+  this->controller_->set_online(false, fc_of(request_pdu), addr_of(request_pdu));
+  return false;
+}
+
 ModbusCommandItem::ModbusCommandItem(ModbusController &controller, modbus::ModbusClientHub *parent, uint8_t address,
                                      RegisterRange &&range)
     : modbus::ModbusClientDevice(parent, address),
@@ -167,6 +234,7 @@ void ModbusController::queue_command(ModbusCommandItem command) {
   this->one_shot_command_items_.push_back(make_unique<ModbusCommandItem>(std::move(command)));
   // A refused frame gets no terminal callback (see the hub contract), so reclaim the item here.
   auto &item = this->one_shot_command_items_.back();
+  // We intentionally do not pass read_options_ here, because one-shot commands are usually writes, and are non-polling.
   if (!item->send()) {
     // The caller (e.g. a write entity) has usually already published optimistically - surface the loss.
     ESP_LOGW(TAG, "Command refused by hub: type=0x%X address=0x%X", static_cast<uint8_t>(item->register_type()),
@@ -203,7 +271,9 @@ void ModbusController::update() {
       ESP_LOGV(TAG, "Module offline - retrying");
       this->cmd_non_responses_ = 0;  // allow the probe through can_send()
       for (auto &cmd : this->polling_command_items_) {
-        if (!cmd.send()) {
+        // Probes carry the read-side options too, so a recovering device resumes streaming on the
+        // probe itself rather than waiting for the next update_interval.
+        if (!cmd.send(this->read_options_)) {
           ESP_LOGD(TAG, "Probe refused by hub for range 0x%X", cmd.register_address());
         }
       }
@@ -217,9 +287,11 @@ void ModbusController::update() {
   if (this->can_send()) {
     for (auto &cmd : this->polling_command_items_) {
       ESP_LOGVV(TAG, "Updating range 0x%X", cmd.register_address());
+      // read_options_ carries the controller's continuous flag (the offline probe above sends it too).
       // A refusal is already logged by the hub; note the affected range for controller-level diagnostics.
-      if (!cmd.send())
+      if (!cmd.send(this->read_options_)) {
         ESP_LOGD(TAG, "Poll refused by hub for range 0x%X", cmd.register_address());
+      }
     }
   }
   this->update_counter_++;
@@ -495,16 +567,18 @@ ModbusCommandItem ModbusCommandItem::create_custom_command(
   return cmd;
 }
 
-bool ModbusCommandItem::send() {
+bool ModbusCommandItem::send(modbus::CommandOptions options) {
+  // Options pass straight through to the hub
   bool accepted;
   if (this->custom_pdu_ != nullptr) {
     // Custom polling command: send the sensor's ready-made PDU (function code + data, no address byte)
     // to this controller's own device address; the hub prepends the address and appends the CRC.
-    accepted = modbus::ModbusClientDevice::queue_pdu(std::span<const uint8_t>(*this->custom_pdu_));
+    accepted = modbus::ModbusClientDevice::queue_pdu(std::span<const uint8_t>(*this->custom_pdu_), options);
   } else if (this->function_code_ != FunctionCode::CUSTOM) {
     accepted = this->queue_pdu(modbus::helpers::create_client_pdu(
-        this->function_code_, this->start_address_, this->register_count_,
-        this->payload.empty() ? nullptr : this->payload.data(), this->payload.size()));
+                                   this->function_code_, this->start_address_, this->register_count_,
+                                   this->payload.empty() ? nullptr : this->payload.data(), this->payload.size()),
+                               options);
   } else {
     // Factory custom command: payload holds a complete raw frame (address + PDU). Send the PDU to the
     // frame's own address (which may differ from this controller's); the hub appends the CRC and routes
@@ -514,7 +588,7 @@ bool ModbusCommandItem::send() {
       ESP_LOGW(TAG, "Empty custom command frame, not sent");
       accepted = false;
     } else {
-      accepted = this->parent_->queue_pdu(frame[0], frame.subspan(1), this);
+      accepted = this->parent_->queue_pdu(frame[0], frame.subspan(1), this, options);
     }
   }
   // The on_command_sent trigger fires from on_sent() when the frame actually reaches the wire.

esphome/components/modbus_controller/modbus_controller.h

@@ -232,6 +232,115 @@ struct RegisterRange {
   SensorSet sensors;  // all sensors of this range
 };
 
+/// A hub device owned by a writer entity (switch/number/select/output) through WriterEntity.
+/// Centralises the feedback to the controller - online/offline tracking, retry counting and the
+/// on_command_sent trigger - and records every dispatch, so a write lambda can tell "I sent it myself"
+/// from "use the default write". The hub base is inherited protected, so the public members below are
+/// the entity's whole request API and nothing can bypass the recording or re-target the device.
+class WriterDevice final : protected modbus::ModbusClientDevice {
+ protected:
+  void on_response(std::span<const uint8_t> request_pdu, std::span<const uint8_t> response_pdu) override;
+  void on_error(std::span<const uint8_t> request_pdu, modbus::ExceptionCode exception_code) override;
+  void on_sent(std::span<const uint8_t> request_pdu) override;
+  void on_not_sent(std::span<const uint8_t> request_pdu) override;
+  bool on_no_response(std::span<const uint8_t> request_pdu) override;
+
+  void notify_online_(std::span<const uint8_t> request_pdu);
+  /// Function code / register address decoded from a request PDU ([fc, addr_hi, addr_lo, ...]).
+  static int fc_of(std::span<const uint8_t> pdu) { return pdu.empty() ? 0 : (pdu[0] & modbus::FUNCTION_CODE_MASK); }
+  static int addr_of(std::span<const uint8_t> pdu) {
+    return pdu.size() >= 3 ? modbus::helpers::get_data<uint16_t>(pdu.data(), 1) : 0;
+  }
+
+  /// Declared before controller_ so they land in the padding after ModbusClientDevice::custom_response_warned_
+  /// instead of adding a word to every entity that owns a device.
+  /// dispatched_: a frame was queued since the last clear_dispatched_().
+  /// write_buffer_deprecated_warned_: warn-once for the legacy write_lambda buffer parameter.
+  bool dispatched_{false};
+  bool write_buffer_deprecated_warned_{false};
+  ModbusController *controller_{nullptr};
+
+ public:
+  /// Whether a frame was queued to the hub since the last clear_dispatched_().
+  bool dispatched() const { return this->dispatched_; }
+
+  bool write_single_register(uint16_t address, uint16_t value) {
+    this->dispatched_ = true;
+    return modbus::ModbusClientDevice::write_single_register(address, value);
+  }
+  bool write_single_coil(uint16_t address, bool value) {
+    this->dispatched_ = true;
+    return modbus::ModbusClientDevice::write_single_coil(address, value);
+  }
+  bool write_multiple_registers(uint16_t address, std::span<const uint16_t> values) {
+    this->dispatched_ = true;
+    return modbus::ModbusClientDevice::write_multiple_registers(address, values);
+  }
+  bool write_multiple_coils(uint16_t address, std::span<const bool> values) {
+    this->dispatched_ = true;
+    return modbus::ModbusClientDevice::write_multiple_coils(address, values);
+  }
+  bool write_multiple_coils(uint16_t address, modbus::PackedBits bits) {
+    this->dispatched_ = true;
+    return modbus::ModbusClientDevice::write_multiple_coils(address, bits);
+  }
+  bool queue_pdu(std::span<const uint8_t> pdu, modbus::CommandOptions options = {}) {
+    this->dispatched_ = true;
+    return modbus::ModbusClientDevice::queue_pdu(pdu, options);
+  }
+  /// Send a legacy raw frame (address + function code + data) to the frame's own address.
+  /// Serves only the deprecated write_lambda buffer path. Remove before 2027.3.0.
+  bool send_raw_frame_deprecated(std::span<const uint8_t> frame);
+
+  void clear_tx_queue_for_device() { modbus::ModbusClientDevice::clear_tx_queue_for_device(); }
+
+  // Entity plumbing, public because the owning WriterEntity holds the only reachable instance (device_ is
+  // protected there and the hub sees just the masked base) - reachability is the access gate, not a friend.
+  void set_controller(ModbusController *controller);
+  void clear_dispatched() { this->dispatched_ = false; }
+  /// Warn once per entity that filling the write_lambda buffer parameter is deprecated (the entity is now the
+  /// command - call a write helper / queue_pdu() on `item` instead). The buffer parameter is removed in 2027.3.0.
+  void warn_write_buffer_deprecated(const LogString *platform, uint16_t address);
+};
+
+/// Gives a writer entity the write API of the WriterDevice it owns. The device is a member, not a base:
+/// the mixin declares no virtual function, so an entity mixing it in gains no second vtable and all the
+/// writer platforms share the single WriterDevice vtable instead of each emitting its own copy.
+/// The forwarders keep `item->write_*()` working unchanged inside a write_lambda.
+class WriterEntity {
+ public:
+  bool dispatched() const { return this->device_.dispatched(); }
+  bool write_single_register(uint16_t address, uint16_t value) {
+    return this->device_.write_single_register(address, value);
+  }
+  bool write_single_coil(uint16_t address, bool value) { return this->device_.write_single_coil(address, value); }
+  bool write_multiple_registers(uint16_t address, std::span<const uint16_t> values) {
+    return this->device_.write_multiple_registers(address, values);
+  }
+  bool write_multiple_coils(uint16_t address, std::span<const bool> values) {
+    return this->device_.write_multiple_coils(address, values);
+  }
+  bool write_multiple_coils(uint16_t address, modbus::PackedBits bits) {
+    return this->device_.write_multiple_coils(address, bits);
+  }
+  bool queue_pdu(std::span<const uint8_t> pdu, modbus::CommandOptions options = {}) {
+    return this->device_.queue_pdu(pdu, options);
+  }
+  void clear_tx_queue_for_device() { this->device_.clear_tx_queue_for_device(); }
+
+ protected:
+  bool send_raw_frame_deprecated_(std::span<const uint8_t> frame) {
+    return this->device_.send_raw_frame_deprecated(frame);
+  }
+  void set_controller_(ModbusController *controller) { this->device_.set_controller(controller); }
+  void clear_dispatched_() { this->device_.clear_dispatched(); }
+  void warn_write_buffer_deprecated_(const LogString *platform, uint16_t address) {
+    this->device_.warn_write_buffer_deprecated(platform, address);
+  }
+
+  WriterDevice device_;
+};
+
 /// A single modbus command. Each command is its own ModbusClientDevice: it sends its frame to the hub
 /// and the hub routes the response back to this object's on_modbus_* callbacks, so the controller no
 /// longer has to match responses to a FIFO queue.
@@ -284,7 +393,9 @@ class ModbusCommandItem : public modbus::ModbusClientDevice {
   /// Queue this command's frame on the hub. Returns false when refused, in which case no callback ever comes.
   /// The item is the hub device, so it must stay alive until its terminal callback; a destroyed item's
   /// pending frame is silently retired.
-  bool send();
+  /// Options pass straight through to the hub; the polling path passes the controller's read-side
+  /// options so reads re-queue after each success, one-shot commands keep the default.
+  bool send(modbus::CommandOptions options = {});
 
   /// factory methods
   /** Create modbus read command
@@ -396,17 +507,16 @@ inline bool offline_retry_due(uint16_t update_counter, uint16_t module_offline_a
 
 class ModbusController final : public PollingComponent {
  public:
+  // The controller is not itself a modbus device - its commands and writer entities send as their own
+  // devices, built against this hub + address.
+  ModbusController(modbus::ModbusClientHub *hub, uint8_t address) : hub_(hub), address_(address) {}
+
   void dump_config() override;
   // No loop() override: the hub owns transmit/receive timing and each command routes its own
   // response, so the controller never joins the looping components at all.
   void setup() override;
   void update() override;
 
-  // The controller is not itself a modbus device - its commands and writer entities send as their own
-  // devices. It only owns the hub + address so those senders can be built against them.
-  void set_parent(modbus::ModbusClientHub *hub) { this->hub_ = hub; }
-  void set_address(uint8_t address) { this->address_ = address; }
-
   /// The hub and modbus address this controller talks to. Used to build commands/entities that send as
   /// their own device.
   modbus::ModbusClientHub *hub() const { return this->hub_; }
@@ -452,6 +562,10 @@ class ModbusController final : public PollingComponent {
   void set_max_cmd_retries(uint8_t max_cmd_retries) { this->max_cmd_retries_ = max_cmd_retries; }
   /// get how many times a command will be (re)sent if no response is received
   uint8_t get_max_cmd_retries() { return this->max_cmd_retries_; }
+  /// called by esphome generated code with the read-side command options applied to every poll
+  void set_read_options(modbus::CommandOptions options) { this->read_options_ = options; }
+  /// the read-side command options applied to every poll
+  const modbus::CommandOptions &read_options() const { return this->read_options_; }
 
  protected:
   /// parse sensormap_ and create range of sequential addresses
@@ -497,6 +611,8 @@ class ModbusController final : public PollingComponent {
   uint16_t offline_skip_updates_{0};
   /// How many times we will retry a command if we get no response
   uint8_t max_cmd_retries_{4};
+  /// read-side command options applied to every poll
+  modbus::CommandOptions read_options_{};
   /// Command sent callback
   CallbackManager<void(int, int)> command_sent_callback_{};
   /// Server online callback

esphome/components/modbus_controller/number/__init__.py

@@ -3,6 +3,7 @@ from esphome.components import number
 from esphome.components.modbus.helpers import (
     MODBUS_WRITE_REGISTER_TYPE,
     SENSOR_VALUE_TYPE,
+    RegisterValues,
 )
 import esphome.config_validation as cv
 from esphome.const import (
@@ -13,14 +14,15 @@ from esphome.const import (
     CONF_MULTIPLY,
     CONF_STEP,
 )
+from esphome.types import ConfigType
 
 from .. import (
     ModbusItemBaseSchema,
     SensorItem,
     add_modbus_base_properties,
-    migrate_custom_command,
     modbus_calc_properties,
     modbus_controller_ns,
+    validate_custom_pdu_item,
 )
 from ..const import (
     CONF_BITMASK,
@@ -43,7 +45,7 @@ ModbusNumber = modbus_controller_ns.class_(
 )
 
 
-def validate_min_max(config):
+def validate_min_max(config: ConfigType) -> ConfigType:
     if config[CONF_MAX_VALUE] <= config[CONF_MIN_VALUE]:
         raise cv.Invalid("max_value must be greater than min_value")
     if config[CONF_MIN_VALUE] < -16777215:
@@ -53,7 +55,7 @@ def validate_min_max(config):
     return config
 
 
-def validate_modbus_number(config):
+def validate_modbus_number(config: ConfigType) -> ConfigType:
     # custom_command is the deprecated alias for custom_pdu (migrated later in final validate).
     has_custom = CONF_CUSTOM_PDU in config or CONF_CUSTOM_COMMAND in config
     if not has_custom and CONF_ADDRESS not in config:
@@ -86,10 +88,10 @@ CONFIG_SCHEMA = cv.All(
     validate_modbus_number,
 )
 
-FINAL_VALIDATE_SCHEMA = migrate_custom_command
+FINAL_VALIDATE_SCHEMA = validate_custom_pdu_item
 
 
-async def to_code(config):
+async def to_code(config: ConfigType) -> None:
     byte_offset, reg_count = modbus_calc_properties(config)
     var = cg.new_Pvariable(
         config[CONF_ID],
@@ -124,7 +126,7 @@ async def to_code(config):
             [
                 (ModbusNumber.operator("ptr"), "item"),
                 (cg.float_, "x"),
-                (cg.std_vector.template(cg.uint16).operator("ref"), "payload"),
+                (RegisterValues.operator("ref"), "payload"),
             ],
             return_type=cg.optional.template(float),
         )

esphome/components/modbus_controller/number/modbus_number.cpp

@@ -1,4 +1,3 @@
-#include <vector>
 #include "modbus_number.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
@@ -29,62 +28,73 @@ void ModbusNumber::parse_and_publish(std::span<const uint8_t> data) {
 }
 
 void ModbusNumber::control(float value) {
-  optional<ModbusCommandItem> write_cmd;
-  std::vector<uint16_t> data;
+  this->clear_dispatched_();
+  // A new write supersedes this entity's own not-yet-sent writes: drop them (and detach any in-flight one)
+  // so a rapidly-changing value writes the latest, not every intermediate.
+  this->clear_tx_queue_for_device();
+  modbus::RegisterValues data;
   float write_value = value;
-  // Is there are lambda configured?
   if (this->write_transform_func_.has_value()) {
-    // data is passed by reference
-    // the lambda can fill the empty vector directly
-    // in that case the return value is ignored
+    // The lambda may drive the write itself via item->write_*(), override the value (return a value), or
+    // (deprecated) fill `data` with the register words to write.
     auto val = (*this->write_transform_func_)(this, value, data);
-    if (val.has_value()) {
-      ESP_LOGV(TAG, "Value overwritten by lambda");
-      write_value = val.value();
-    } else {
+    if (this->dispatched()) {
+      this->publish_state(value);
+      return;
+    }
+    if (!data.empty()) {
+      // Deprecated buffer path (frozen): the lambda filled a legacy raw frame as words; pack it big-endian.
+      this->warn_write_buffer_deprecated_(LOG_STR("number"), this->start_address);
+#if ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_VERBOSE
+      char hex_buf[format_hex_pretty_uint16_size(MODBUS_NUMBER_MAX_LOG_REGISTERS)];
+#endif
+      ESP_LOGV(TAG, "Modbus Number write raw: %s",
+               format_hex_pretty_to(hex_buf, sizeof(hex_buf), data.data(), data.size()));
+      // Sized to hold RegisterValues at capacity, so a full buffer can never truncate into a valid frame.
+      StaticVector<uint8_t, modbus::MAX_NUM_OF_REGISTERS_TO_READ * 2> bytes;
+      for (uint16_t word : data) {
+        const auto word_bytes = decode_value(word);
+        bytes.push_back(word_bytes[0]);
+        bytes.push_back(word_bytes[1]);
+      }
+      if (!this->send_raw_frame_deprecated_(std::span<const uint8_t>(bytes.data(), bytes.size()))) {
+        ESP_LOGW(TAG, "Modbus write for '%s' was refused by the hub; state not published", this->get_name().c_str());
+        return;
+      }
+      this->publish_state(value);
+      return;
+    }
+    if (!val.has_value()) {
       ESP_LOGV(TAG, "Communication handled by lambda - exiting control");
       return;
     }
+    ESP_LOGV(TAG, "Value overwritten by lambda");
+    write_value = val.value();
   } else {
     write_value = this->multiply_by_ * write_value;
   }
 
-  if (!data.empty()) {
-#if ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_VERBOSE
-    char hex_buf[format_hex_pretty_uint16_size(MODBUS_NUMBER_MAX_LOG_REGISTERS)];
-#endif
-    ESP_LOGV(TAG, "Modbus Number write raw: %s",
-             format_hex_pretty_to(hex_buf, sizeof(hex_buf), data.data(), data.size()));
-    write_cmd.emplace(ModbusCommandItem::create_custom_command(
-        this->parent_, data,
-        [this](modbus::EntityType register_type, uint16_t start_address, std::span<const uint8_t> data) {
-          this->parent_->on_write_register_response(register_type, this->start_address, data);
-        }));
-  } else {
-    std::vector<uint16_t> payload;
-    modbus::helpers::float_to_payload(payload, write_value, this->sensor_value_type);
+  modbus::helpers::float_to_payload(data, write_value, this->sensor_value_type);
+  // float_to_payload() appends nothing for RAW, so an empty payload must be caught before data[0] below.
+  if (data.empty()) {
+    ESP_LOGW(TAG, "No payload was created for updating number");
+    return;
+  }
 
-    ESP_LOGD(TAG,
-             "Updating register: connected Sensor=%s start address=0x%X register count=%d new value=%.02f (val=%.02f)",
-             this->get_name().c_str(), this->start_address, this->register_count, value, write_value);
+  ESP_LOGD(TAG,
+           "Updating register: connected Sensor=%s start address=0x%X register count=%d new value=%.02f (val=%.02f)",
+           this->get_name().c_str(), this->start_address, this->register_count, value, write_value);
 
-    // Create and send the write command
-    if (this->register_count == 1 && !this->use_write_multiple_) {
-      write_cmd.emplace(
-          ModbusCommandItem::create_write_single_command(this->parent_, this->write_address(), payload[0]));
-    } else {
-      write_cmd.emplace(ModbusCommandItem::create_write_multiple_command(this->parent_, this->write_address(),
-                                                                         this->register_count, payload));
-    }
-    // publish new value
-    write_cmd->on_data_func = [this, value](modbus::EntityType register_type, uint16_t start_address,
-                                            std::span<const uint8_t> data) {
-      // gets called when the write command is ack'd from the device
-      this->parent_->on_write_register_response(register_type, start_address, data);
-      this->publish_state(value);
-    };
+  bool queued;
+  if (this->register_count == 1 && !this->use_write_multiple_) {
+    queued = this->write_single_register(this->write_address(), data[0]);
+  } else {
+    queued = this->write_multiple_registers(this->write_address(), data);
+  }
+  if (!queued) {
+    ESP_LOGW(TAG, "Modbus write for '%s' was refused by the hub; state not published", this->get_name().c_str());
+    return;
   }
-  this->parent_->queue_command(std::move(*write_cmd));
   this->publish_state(value);
 }
 void ModbusNumber::dump_config() { LOG_NUMBER(TAG, "Modbus Number", this); }

esphome/components/modbus_controller/number/modbus_number.h

@@ -10,7 +10,7 @@ namespace esphome::modbus_controller {
 
 using value_to_data_t = std::function<float>(float);
 
-class ModbusNumber final : public number::Number, public Component, public SensorItem {
+class ModbusNumber final : public number::Number, public Component, public SensorItem, public WriterEntity {
  public:
   ModbusNumber(modbus::EntityType register_type, uint16_t start_address, uint8_t offset, uint32_t bitmask,
                SensorValueType value_type, int register_count, bool force_new_range) {
@@ -26,11 +26,11 @@ class ModbusNumber final : public number::Number, public Component, public Senso
   void dump_config() override;
   void parse_and_publish(std::span<const uint8_t> data) override;
   float get_setup_priority() const override { return setup_priority::HARDWARE; }
-  void set_parent(ModbusController *parent) { this->parent_ = parent; }
+  void set_parent(ModbusController *parent) { this->set_controller_(parent); }
   void set_write_multiply(float factor) { this->multiply_by_ = factor; }
 
   using transform_func_t = optional<float> (*)(ModbusNumber *, float, std::span<const uint8_t>);
-  using write_transform_func_t = optional<float> (*)(ModbusNumber *, float, std::vector<uint16_t> &);
+  using write_transform_func_t = optional<float> (*)(ModbusNumber *, float, modbus::RegisterValues &);
   void set_template(transform_func_t f) { this->transform_func_ = f; }
   void set_write_template(write_transform_func_t f) { this->write_transform_func_ = f; }
   void set_use_write_mutiple(bool use_write_multiple) { this->use_write_multiple_ = use_write_multiple; }
@@ -39,7 +39,6 @@ class ModbusNumber final : public number::Number, public Component, public Senso
   void control(float value) override;
   optional<transform_func_t> transform_func_{nullopt};
   optional<write_transform_func_t> write_transform_func_{nullopt};
-  ModbusController *parent_{nullptr};
   float multiply_by_{1.0};
   bool use_write_multiple_{false};
 };