Merge branch 'dev' into esp32-log-v2-idf61

[mipi_rgb] Rotate pure RGB panels in software (#20757 )
[tests] Reset saved preferences before every C++ unit test (#20771 )
2026-10-15 02:32:49 +00:00 · 2026-10-14 16:30:23 -10:00 · 2026-10-14 22:05:01 -04:00 · 2026-10-14 16:01:45 -10:00 · 2026-10-14 22:00:07 -04:00 · 2026-10-14 21:59:56 -04:00
3793 changed files with 101618 additions and 14442 deletions
@@ -32,7 +32,7 @@ runs:
      # detects the activated venv via ``VIRTUAL_ENV`` so the venv layout
      # downstream jobs rely on is preserved.
      if: steps.cache-venv.outputs.cache-hit != 'true'
-      uses: astral-sh/setup-uv@c18668ad3cf93ea998bef934396af7bb5c839dc7 # v10.2.0
+      uses: astral-sh/setup-uv@1c37ad07a6a961277cf70c0d37d6f313000f5884 # v10.3.0
      with:
        enable-cache: true
        # Pull request saves land in per-PR scopes nothing else can
@@ -53,7 +53,7 @@ module.exports = async ({ github, context }) => {
  });
  const currentLabels = currentLabelsData.map(label => label.name);
  const managedLabels = currentLabels.filter(label =>
-    label.startsWith('component: ') || MANAGED_LABELS.includes(label)
+    label.startsWith('component: ') || label.startsWith('platform: ') || MANAGED_LABELS.includes(label)
  );

  // Check for mega-PR early - if present, skip most automatic labeling
@@ -42,8 +42,8 @@ function generateReviewMessages(finalLabels, originalLabelCount, deprecatedInfo,
    let message = `${TOO_BIG_MARKER}\n### 📦 Pull Request Size\n\n`;

    message +=
-      `Hey @${prAuthor}, thanks for the contribution! Just a heads up, ` +
-      `this PR is on the large side `;
+      `Hey @${prAuthor}, thanks for the contribution. This PR is on the ` +
+      `large side `;

    if (tooManyLabels && tooManyChanges) {
      message +=
@@ -57,16 +57,31 @@ function generateReviewMessages(finalLabels, originalLabelCount, deprecatedInfo,
    }

    message += `, which makes it harder for maintainers to review.\n\n`;
+    let condition;
+    if (tooManyLabels && tooManyChanges) {
+      condition =
+        `is at most ${TOO_BIG_THRESHOLD} lines (excluding tests) and touches ` +
+        `at most ${MAX_LABELS} components/areas`;
+    } else if (tooManyLabels) {
+      condition = `touches at most ${MAX_LABELS} components/areas`;
+    } else {
+      condition = `is at most ${TOO_BIG_THRESHOLD} lines (excluding tests)`;
+    }
    message +=
-      `Smaller, focused PRs tend to be reviewed much faster since they ` +
-      `fit into the short gaps between other maintainer work; large ones ` +
-      `often have to wait for a rare long uninterrupted block of time. ` +
-      `If you can break this up into smaller pieces that can be reviewed ` +
-      `independently, it will almost certainly land faster overall.\n\n`;
+      `**This PR will not be reviewed until it ${condition}.** We know ` +
+      `that is not what you want to hear after this much work, and we want ` +
+      `to be upfront so you do not wait for a review that is not coming: ` +
+      `please split the change. The label is removed automatically once ` +
+      `the PR ${condition}.\n\n`;
    message +=
-      `Before putting more time in, it's also worth popping into ` +
-      `\`#devs\` on [Discord](https://esphome.io/chat) so we can help ` +
-      `you scope things and flag anything already in flight.\n\n`;
+      `There is no exception you can request. Rarely, a maintainer agrees in ` +
+      `\`#devs\` on [Discord](https://esphome.io/chat) to review a change that ` +
+      `genuinely cannot be split as one piece and adds the \`mega-pr\` label, ` +
+      `but that is rare enough that you should plan on splitting rather than ` +
+      `wait for it. Smaller, focused PRs are picked up much faster because ` +
+      `they fit into the short gaps between other maintainer work. For a new ` +
+      `component, the first PR brings the hub and a single platform (for ` +
+      `example \`sensor\`); each further platform is its own PR on top of it.\n\n`;
    message +=
      `For more details (including how to split the work up), see: ` +
      `https://developers.esphome.io/contributing/submitting-your-work/` +
@@ -214,6 +229,7 @@ async function handleMaintainerAccessComment(github, context, maintainerAccess)
 }

 module.exports = {
+  generateReviewMessages,
  handleReviews,
  handleMaintainerAccessComment
 };
@@ -0,0 +1,38 @@
+const { describe, it } = require('node:test');
+const assert = require('node:assert/strict');
+const { generateReviewMessages } = require('../reviews');
+
+const MAX_LABELS = 15;
+const TOO_BIG_THRESHOLD = 1000;
+
+function tooBigMessage(labelCount, additions) {
+  const files = [{ filename: 'esphome/components/a/a.cpp', additions, deletions: 0 }];
+  const messages = generateReviewMessages(['too-big'], labelCount, null, files, additions, 0, 'someone', MAX_LABELS, TOO_BIG_THRESHOLD);
+  assert.equal(messages.length, 1);
+  return messages[0];
+}
+
+describe('too-big review message', () => {
+  it('names the line cap when the PR is too long', () => {
+    const message = tooBigMessage(3, 1500);
+    assert.match(message, /will not be reviewed until it is at most 1000 lines \(excluding tests\)\./);
+    assert.match(message, /removed automatically once the PR is at most 1000 lines/);
+    assert.doesNotMatch(message, /components\/areas\./);
+  });
+
+  it('names the area cap when the PR touches too many areas but is short', () => {
+    const message = tooBigMessage(20, 200);
+    assert.match(message, /will not be reviewed until it touches at most 15 components\/areas\./);
+    assert.doesNotMatch(message, /until it is at most 1000 lines/);
+  });
+
+  it('names both caps when both are exceeded', () => {
+    const message = tooBigMessage(20, 1500);
+    assert.match(message, /is at most 1000 lines \(excluding tests\) and touches at most 15 components\/areas\./);
+  });
+
+  it('tells new-component authors to bring one platform first', () => {
+    assert.match(tooBigMessage(3, 1500), /hub and a single platform/);
+    assert.match(tooBigMessage(3, 1500), /mega-pr/);
+  });
+});
@@ -29,7 +29,7 @@ jobs:
      - name: Set up uv
        # ``--system`` (below) installs into the setup-python interpreter;
        # no venv is created or restored by this workflow.
-        uses: astral-sh/setup-uv@c18668ad3cf93ea998bef934396af7bb5c839dc7 # v10.2.0
+        uses: astral-sh/setup-uv@1c37ad07a6a961277cf70c0d37d6f313000f5884 # v10.3.0
        with:
          enable-cache: true
          # Pull-request-only workflow: a save could never be shared and
@@ -97,7 +97,7 @@ jobs:
        run: git diff
      - if: failure()
        name: Archive artifacts
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
        with:
          name: generated-proto-files
          path: |
@@ -128,7 +128,7 @@ jobs:

      - name: Upload compile-test image artifact
        if: matrix.os == 'ubuntu-24.04' && matrix.build_type == 'docker'
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
        with:
          # The tar is already compressed, so upload it as-is. archive: false
          # skips the redundant zip and makes the file name the artifact name
@@ -210,7 +210,7 @@ jobs:
    steps:
      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
      - name: Download image artifact
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@9000827ccba6bdab643e8b6fd33ac0654aef8333 # v8.0.2
        with:
          name: compile-test-image.tar.zst
      - name: Load image
@@ -49,7 +49,7 @@ jobs:
        # detects the activated venv via ``VIRTUAL_ENV`` so downstream jobs
        # that ``. venv/bin/activate`` see an identical layout.
        if: steps.cache-venv.outputs.cache-hit != 'true'
-        uses: astral-sh/setup-uv@c18668ad3cf93ea998bef934396af7bb5c839dc7 # v10.2.0
+        uses: astral-sh/setup-uv@1c37ad07a6a961277cf70c0d37d6f313000f5884 # v10.3.0
        with:
          enable-cache: true
          # Pull request saves land in per-PR scopes nothing else can
@@ -81,8 +81,8 @@ jobs:
      - name: Install apt packages (cached)
        uses: awalsh128/cache-apt-pkgs-action@553a35bb8ebd9fcabcb1c9451aa4c98e1b4ca8a9 # v1.6.3
        with:
-          packages: libsdl2-dev ccache
-          version: 1.1
+          packages: libsdl2-dev libmbedtls-dev ccache
+          version: 1.2

  determine-jobs:
    name: Determine which jobs to run
@@ -286,7 +286,7 @@ jobs:
          fi
          echo "version=$version" >> "$GITHUB_OUTPUT"
      - name: Run prek
-        uses: j178/prek-action@4e14d07f9231acabce116ccfca13b13dd9755ece # v3.0.0
+        uses: j178/prek-action@1382ad72dea72f9d53832f2bcb65b3e87a947204 # v3.0.1
        with:
          prek-version: ${{ steps.prek.outputs.version }}
          # This job only runs on pull requests, so nothing ever populates
@@ -415,8 +415,8 @@ jobs:
        timeout-minutes: 10
        uses: awalsh128/cache-apt-pkgs-action@553a35bb8ebd9fcabcb1c9451aa4c98e1b4ca8a9 # v1.6.3
        with:
-          packages: libsdl2-dev ccache
-          version: 1.1
+          packages: libsdl2-dev libmbedtls-dev ccache
+          version: 1.2
      - name: Set up Python 3.13
        id: python
        uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97 # v7.0.0
@@ -438,7 +438,7 @@ jobs:
      - name: Set up uv
        # Only needed on cache miss to populate the venv.
        if: steps.cache-venv.outputs.cache-hit != 'true'
-        uses: astral-sh/setup-uv@c18668ad3cf93ea998bef934396af7bb5c839dc7 # v10.2.0
+        uses: astral-sh/setup-uv@1c37ad07a6a961277cf70c0d37d6f313000f5884 # v10.3.0
        with:
          enable-cache: true
          # Pull request saves land in per-PR scopes nothing else can
@@ -477,7 +477,7 @@ jobs:
        # Tests that compare rendered output write the image they actually got here, so a
        # failure can be looked at without reproducing the whole build locally.
        if: failure()
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
        with:
          name: integration-test-artifacts-${{ matrix.bucket.name }}
          path: test_artifacts/
@@ -488,7 +488,7 @@ jobs:
        # script/update_integration_test_durations.py; only full matrix dev
        # runs produce usable data.
        if: github.ref == 'refs/heads/dev' && needs.determine-jobs.outputs.integration-run-all == 'true'
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
        with:
          name: junit-integration-${{ strategy.job-index }}
          path: junit-integration.xml
@@ -528,7 +528,7 @@ jobs:
          script/check_import_time.py --check --har importtime.har
      - name: Upload waterfall HAR
        if: always()
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
        with:
          name: import-time-waterfall
          path: importtime.har
@@ -626,7 +626,7 @@ jobs:
            apt-get install -y libc6-dbg

      - name: Run CodSpeed benchmarks
-        uses: CodSpeedHQ/action@373d6868929f444bc08d901fd0eb0ad52a8875ea # v5.2.1
+        uses: CodSpeedHQ/action@f842b9a3ffe213dbb81768fd7f7eeb4dfcf1c369 # v5.4.2
        with:
          run: |
            . venv/bin/activate
@@ -680,7 +680,7 @@ jobs:
        include:
          - id: clang-tidy
            name: Run script/clang-tidy for ESP8266
-            options: --environment esp8266-arduino-tidy --grep USE_ESP8266
+            options: --environment esp8266-arduino-tidy --grep USE_ESP8266 --grep USE_SOCKET_IMPL_LWIP_TCP --grep USE_SHD_FIRMWARE_DATA
            pio_cache_key: tidyesp8266
          - id: clang-tidy
            name: Run script/clang-tidy for ESP32 Arduino
@@ -693,12 +693,16 @@ jobs:
            ignore_errors: false
          - id: clang-tidy
            name: Run script/clang-tidy for RP2
-            options: --environment rp2-tidy --grep USE_RP2
+            options: --environment rp2-tidy --grep USE_RP2 --grep USE_BLE_SCAN_RESPONSE_MERGER
            pio_cache_key: tidyrp2
+          - id: clang-tidy
+            name: Run script/clang-tidy for host
+            options: --environment host-tidy --grep USE_HOST
+            pio_cache_key: tidyhost
          - id: clang-tidy
            name: Run script/clang-tidy for LibreTiny
            environments: bk72xx-tidy ln882h-tidy rtl87xxb-tidy rtl87xxc-tidy
-            options: --grep USE_LIBRETINY --grep USE_BK72XX --grep USE_RTL87XX --grep USE_LN882X
+            options: --grep USE_LIBRETINY --grep USE_BK72XX --grep USE_RTL87XX --grep USE_LN882X --grep USE_LN882H_BLE --grep USE_SOCKET_IMPL_LWIP_SOCKETS
            pio_cache_key: tidylibretiny

    steps:
@@ -707,6 +711,16 @@ jobs:
        with:
          # Need history for HEAD~1 to work for checking changed files
          fetch-depth: 2
+      - name: Install apt packages (cached)
+        if: matrix.pio_cache_key == 'tidyhost'
+        # libsdl2-dev is needed by the sdl component on the host, libmbedtls-dev
+        # by dsmr and dlms_meter. Packages and version must match seed-apt-cache
+        # exactly.
+        timeout-minutes: 10
+        uses: awalsh128/cache-apt-pkgs-action@553a35bb8ebd9fcabcb1c9451aa4c98e1b4ca8a9 # v1.6.3
+        with:
+          packages: libsdl2-dev libmbedtls-dev ccache
+          version: 1.2

      - name: Restore Python
        id: restore-python
@@ -893,14 +907,20 @@ jobs:
      matrix:
        include:
          - id: clang-tidy
-            name: Run script/clang-tidy for ESP32 IDF 1/3
-            options: --environment esp32-idf-tidy --split-num 3 --split-at 1
+            name: Run script/clang-tidy for ESP32 IDF 1/5
+            options: --environment esp32-idf-tidy --split-num 5 --split-at 1
          - id: clang-tidy
-            name: Run script/clang-tidy for ESP32 IDF 2/3
-            options: --environment esp32-idf-tidy --split-num 3 --split-at 2
+            name: Run script/clang-tidy for ESP32 IDF 2/5
+            options: --environment esp32-idf-tidy --split-num 5 --split-at 2
          - id: clang-tidy
-            name: Run script/clang-tidy for ESP32 IDF 3/3
-            options: --environment esp32-idf-tidy --split-num 3 --split-at 3
+            name: Run script/clang-tidy for ESP32 IDF 3/5
+            options: --environment esp32-idf-tidy --split-num 5 --split-at 3
+          - id: clang-tidy
+            name: Run script/clang-tidy for ESP32 IDF 4/5
+            options: --environment esp32-idf-tidy --split-num 5 --split-at 4
+          - id: clang-tidy
+            name: Run script/clang-tidy for ESP32 IDF 5/5
+            options: --environment esp32-idf-tidy --split-num 5 --split-at 5

    steps:
      - name: Check out code from GitHub
@@ -983,14 +1003,14 @@ jobs:
          - id: clang-tidy
            name: Run script/clang-tidy for ESP32 S3
            # yamllint disable-line rule:line-length
-            options: --environment esp32s3-idf-tidy --grep SOC_TEMP_SENSOR_SUPPORTED --grep USE_ESP32_VARIANT_ESP32S3 --grep USE_LOGGER_USB_CDC
+            options: --environment esp32s3-idf-tidy --grep SOC_TEMP_SENSOR_SUPPORTED --grep USE_ESP32_VARIANT_ESP32S3 --grep USE_LOGGER_USB_CDC --grep SOC_I2S_SUPPORTS_TDM
            tidy_environment: esp32s3-idf-tidy
          - id: clang-tidy
            name: Run script/clang-tidy for ESP32 P4
            # P4 has no native Wi-Fi/BLE; those run over the hosted co-processor,
            # so their code paths differ -- lint them under the P4 build too.
            # yamllint disable-line rule:line-length
-            options: --environment esp32p4-idf-tidy --grep USE_ESP32_VARIANT_ESP32P4 --grep USE_ESP32_HOSTED --grep USE_WIFI --grep USE_BLE
+            options: --environment esp32p4-idf-tidy --grep USE_ESP32_VARIANT_ESP32P4 --grep CONFIG_IDF_TARGET_ESP32P4 --grep USE_ESP32_HOSTED --grep USE_WIFI --grep USE_BLE
            tidy_environment: esp32p4-idf-tidy
          - id: clang-tidy
            name: Run script/clang-tidy for ESP32 C6
@@ -1096,8 +1116,8 @@ jobs:
        timeout-minutes: 10
        uses: awalsh128/cache-apt-pkgs-action@553a35bb8ebd9fcabcb1c9451aa4c98e1b4ca8a9 # v1.6.3
        with:
-          packages: libsdl2-dev ccache
-          version: 1.1
+          packages: libsdl2-dev libmbedtls-dev ccache
+          version: 1.2

      - name: Check out code from GitHub
        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
@@ -1329,6 +1349,91 @@ jobs:
          # config first, so a separate config pass is redundant.
          python3 script/test_build_components.py -e compile -t esp8266-ard -c "$TEST_COMPONENTS" -f --toolchain arduino --fail-on-no-tests

+  test-esp8266-native-windows:
+    name: Compile esp8266 with the native toolchain on Windows (ccache ${{ matrix.ccache }})
+    runs-on: windows-latest
+    needs:
+      - common
+      - determine-jobs
+    if: github.event_name == 'pull_request' && needs.determine-jobs.outputs.esp8266-native == 'true'
+    # A hung compiler must fail the job, not hold the runner for six hours.
+    timeout-minutes: 40
+    strategy:
+      fail-fast: false
+      matrix:
+        # Both ways the build runs on Windows: ESPHome Desktop bundles
+        # ccache and puts it on PATH, a pip install has none.
+        ccache: ["1", "0"]
+    env:
+      ESPHOME_CCACHE_ENABLE: ${{ matrix.ccache }}
+      # The test script prints characters the cp1252 console cannot encode
+      PYTHONUTF8: "1"
+      # The exact static build ESPHome Desktop ships
+      CCACHE_URL: https://github.com/ccache/ccache/releases/download/v4.14/ccache-4.14-windows-x86_64.zip
+      CCACHE_SHA256: 2568347a697e103ca1b073981c704ad76fb2507d066c38dba038dd73399d968f
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+
+      - name: Install ccache
+        if: matrix.ccache == '1'
+        shell: pwsh
+        run: |
+          $dir = Join-Path $env:RUNNER_TEMP "ccache"
+          New-Item -ItemType Directory -Force $dir | Out-Null
+          $zip = Join-Path $dir "ccache.zip"
+          Invoke-WebRequest -Uri $env:CCACHE_URL -OutFile $zip
+          $hash = (Get-FileHash $zip -Algorithm SHA256).Hash.ToLower()
+          if ($hash -ne $env:CCACHE_SHA256) {
+            Write-Host "::error::ccache archive sha256 $hash does not match $env:CCACHE_SHA256"
+            exit 1
+          }
+          Expand-Archive -Path $zip -DestinationPath $dir
+          $bin = Get-ChildItem -Path $dir -Recurse -Filter ccache.exe | Select-Object -First 1
+          Add-Content -Path $env:GITHUB_PATH -Value $bin.DirectoryName
+          & $bin.FullName --version
+
+      - name: Compile
+        shell: pwsh
+        # One component test: web_server brings wifi, api and the async web
+        # server libraries, the shape of a typical ESP8266 device
+        run: |
+          . .\venv\Scripts\Activate.ps1
+          $arguments = "script/test_build_components.py", "-e", "compile", "-t", "esp8266-ard", "-c", "web_server", "--base-only", "--toolchain", "arduino", "--fail-on-no-tests"
+          $p = Start-Process -FilePath python -ArgumentList $arguments -NoNewWindow -PassThru
+          # Reading the handle keeps ExitCode available after the process exits
+          $null = $p.Handle
+          if (-not $p.WaitForExit(25 * 60 * 1000)) {
+            Write-Host "::error::The compile did not finish in 25 minutes; processes still running:"
+            Get-CimInstance Win32_Process |
+              Where-Object { $_.CommandLine -match 'xtensa|ccache|ninja|esphome' } |
+              Select-Object ProcessId, ParentProcessId, CreationDate, CommandLine |
+              Format-List | Out-String -Width 4096 | Write-Host
+            Get-Process |
+              Where-Object { $_.Name -match 'cc1|ccache|ninja|xtensa|python' } |
+              Select-Object Id, Name, CPU, WorkingSet64 |
+              Format-Table | Out-String | Write-Host
+            taskkill /PID $p.Id /T /F
+            exit 1
+          }
+          exit $p.ExitCode
+
+      - name: Show ccache statistics
+        # Also after a failed or killed compile: the counters say whether
+        # ccache was ever reached
+        if: always() && matrix.ccache == '1'
+        shell: pwsh
+        # The build keeps its store under the esphome tools cache
+        run: |
+          $env:CCACHE_DIR = Join-Path $env:LOCALAPPDATA "esphome\Cache\arduino8266\ccache"
+          ccache -s
+
  device-builder:
    name: Test downstream esphome/device-builder
    runs-on: ubuntu-24.04
@@ -1357,7 +1462,7 @@ jobs:
        # install step (order-of-magnitude faster on cold boots,
        # with its own wheel cache). actions/setup-python still
        # provides the interpreter.
-        uses: astral-sh/setup-uv@c18668ad3cf93ea998bef934396af7bb5c839dc7 # v10.2.0
+        uses: astral-sh/setup-uv@1c37ad07a6a961277cf70c0d37d6f313000f5884 # v10.3.0
        with:
          enable-cache: true
          # Pull request saves land in per-PR scopes nothing else can
@@ -1416,31 +1521,27 @@ jobs:
            echo "::warning::ci_memory_impact_extract.py not found on target branch, skipping memory impact analysis"
          fi

-      # Check if test files exist on the target branch for the requested
-      # components and platform. When a PR adds new test files for a platform,
-      # the target branch won't have them yet, so skip instead of failing.
-      # This check must be done here (not in determine-jobs.py) because
-      # determine-jobs runs on the PR branch and cannot see what the target
-      # branch has.
+      # The build below uses --base-only, so skip unless the target branch has
+      # test.<platform>.yaml for every requested component (test-*.yaml
+      # variants alone compile nothing, and a partial set would compare a
+      # smaller target build against the PR build). Checked here, not in
+      # determine-jobs.py, because determine-jobs runs on the PR branch and
+      # cannot see the target branch.
      - name: Check for test files on target branch
        id: check-tests
        if: steps.check-script.outputs.skip != 'true'
        run: |
          components='${{ toJSON(fromJSON(needs.determine-jobs.outputs.memory_impact).components) }}'
          platform="${{ fromJSON(needs.determine-jobs.outputs.memory_impact).platform }}"
-          found=false
+          missing=""
          for component in $(echo "$components" | jq -r '.[]'); do
-            # Check for test files matching the platform (test.platform.yaml or test-*.platform.yaml)
-            for f in tests/components/${component}/test*.${platform}.yaml; do
-              if [ -f "$f" ]; then
-                found=true
-                break 2
-              fi
-            done
+            if [ ! -f "tests/components/${component}/test.${platform}.yaml" ]; then
+              missing="${missing} ${component}"
+            fi
          done
-          if [ "$found" = false ]; then
+          if [ -n "$missing" ]; then
            echo "skip=true" >> $GITHUB_OUTPUT
-            echo "::warning::No test files found on target branch for platform ${platform}, skipping memory impact analysis"
+            echo "::warning::No test.${platform}.yaml on target branch for${missing}, skipping memory impact analysis"
          else
            echo "skip=false" >> $GITHUB_OUTPUT
          fi
@@ -1560,7 +1661,7 @@ jobs:
          fi

      - name: Upload memory analysis JSON
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
        with:
          name: memory-analysis-target
          path: memory-analysis-target.json
@@ -1623,7 +1724,7 @@ jobs:
            --platform "$platform"

      - name: Upload memory analysis JSON
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
        with:
          name: memory-analysis-pr
          path: memory-analysis-pr.json
@@ -1653,13 +1754,13 @@ jobs:
          python-version: ${{ env.DEFAULT_PYTHON }}
          cache-key: ${{ needs.common.outputs.cache-key }}
      - name: Download target analysis JSON
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@9000827ccba6bdab643e8b6fd33ac0654aef8333 # v8.0.2
        with:
          name: memory-analysis-target
          path: ./memory-analysis
        continue-on-error: true
      - name: Download PR analysis JSON
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@9000827ccba6bdab643e8b6fd33ac0654aef8333 # v8.0.2
        with:
          name: memory-analysis-pr
          path: ./memory-analysis
@@ -1703,6 +1804,7 @@ jobs:
      - test-build-components-split
      - test-esp32-platformio
      - test-esp8266-native
+      - test-esp8266-native-windows
      - device-builder
      - memory-impact-target-branch
      - memory-impact-pr-branch
@@ -56,7 +56,7 @@ jobs:

      # Initializes the CodeQL tools for scanning.
      - name: Initialize CodeQL
-        uses: github/codeql-action/init@2892aa5e19bbd11bc0cff5427e3b750a04d9e3c2 # v4.38.2
+        uses: github/codeql-action/init@24c54180a607b1449ed407dd24f251e4e9147c8d # v4.38.3
        with:
          languages: ${{ matrix.language }}
          build-mode: ${{ matrix.build-mode }}
@@ -84,6 +84,6 @@ jobs:
          exit 1

      - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@2892aa5e19bbd11bc0cff5427e3b750a04d9e3c2 # v4.38.2
+        uses: github/codeql-action/analyze@24c54180a607b1449ed407dd24f251e4e9147c8d # v4.38.3
        with:
          category: "/language:${{matrix.language}}"
@@ -125,14 +125,20 @@ jobs:
            }

            async function getEsphomeAndComponentChanges(github, owner, repo, prNumber) {
-                const changedFiles = await github.rest.pulls.listFiles({
-                    owner: owner,
-                    repo: repo,
-                    pull_number: prNumber,
-                });
+                const changedFiles = await github.paginate(
+                    github.rest.pulls.listFiles,
+                    {
+                        owner: owner,
+                        repo: repo,
+                        pull_number: prNumber,
+                        per_page: 100,
+                    }
+                );

-                const esphomeChanges = changedFiles.data
-                    .filter(file => file.filename !== "esphome/core/defines.h" && file.filename.startsWith('esphome/'))
+                // Files used only for development and CI, which do not affect use as an external component
+                const ignoredFiles = ["esphome/core/defines.h", "esphome/idf_component.yml"];
+                const esphomeChanges = changedFiles
+                    .filter(file => !ignoredFiles.includes(file.filename) && file.filename.startsWith('esphome/'))
                    .map(file => {
                        const match = file.filename.match(/esphome\/([^/]+)/);
                        return match ? match[1] : null;
@@ -144,7 +150,7 @@ jobs:
                }

                const uniqueEsphomeChanges = [...new Set(esphomeChanges)];
-                const componentChanges = changedFiles.data
+                const componentChanges = changedFiles
                    .filter(file => file.filename.startsWith('esphome/components/'))
                    .map(file => {
                        const match = file.filename.match(/esphome\/components\/([^/]+)\//);
@@ -162,7 +162,7 @@ jobs:
      #     version: ${{ needs.init.outputs.tag }}

      - name: Upload digests
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        uses: actions/upload-artifact@cf430e030ddbb5b0abf93d22962f4752f3646cd9 # v7.0.2
        with:
          name: digests-${{ matrix.platform.arch }}
          path: /tmp/digests
@@ -195,7 +195,7 @@ jobs:
      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1

      - name: Download digests
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@9000827ccba6bdab643e8b6fd33ac0654aef8333 # v8.0.2
        with:
          pattern: digests-*
          path: /tmp/digests
@@ -16,16 +16,18 @@ jobs:
    # No GITHUB_TOKEN permissions: the reusable workflow mints an ESPHome
    # GitHub App token so the labels, comments and closures come from
    # esphome[bot] instead of github-actions[bot].
-    uses: esphome/workflows/.github/workflows/stale.yml@cc3e76de337dc59bc1cba8da58d963cd23b873f1  # main
+    uses: esphome/workflows/.github/workflows/stale.yml@4fbce13026c393d6eb6b247e394dcd9ef1af76c2  # main
    secrets:
      ESPHOME_GITHUB_APP_PRIVATE_KEY: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
    with:
      # Live only on dev: a workflow_dispatch from any other branch is a dry run
      dry-run: ${{ github.ref != 'refs/heads/dev' }}
      days-before-stale: 90
+      days-before-stale-conflicting: 30
      days-before-close: 7
      stale-label: stale
      exempt-label: not-stale
+      conflict-label: needs-rebase
      ignored-users: esphbot,codecov-commenter
      stale-pr-message: >
        There hasn't been any activity on this pull request recently. This
@@ -36,6 +38,18 @@ jobs:
        to keep it open. Also, please merge the latest dev branch into your
        branch to ensure that it's up to date with the latest changes.

+        Thank you for your contribution!
+      conflict-pr-message: >
+        This pull request has merge conflicts. Please merge the latest dev
+        branch into your branch to resolve them.
+      stale-conflicting-pr-message: >
+        The merge conflicts on this pull request have not been resolved for
+        30 days, so it has been marked as stale and will be closed if they
+        are not resolved within 7 days.
+
+        Please merge the latest dev branch into your branch. Once the pull
+        request is mergeable again the stale label is removed.
+
        Thank you for your contribution!
      stale-issue-message: >
        There hasn't been any activity on this issue recently. Due to the
@@ -7,10 +7,6 @@ on:
 permissions:
  pull-requests: read  # issues.listLabelsOnIssue to detect blocking labels (needs-docs, needs-developer-docs, merge-after-release, chained-pr)

-concurrency:
-  group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
-  cancel-in-progress: true
-
 jobs:
  check:
    name: Check blocking labels
@@ -15,6 +15,8 @@ on:
  # base branch checkout, so fork code never runs with the token.
  pull_request_target:
    types: [opened, synchronize, reopened]
+    branches:
+      - dev
    paths:
      - requirements_dev.txt
      - requirements_test.txt
@@ -47,7 +47,7 @@ jobs:
        # setup-python interpreter so subsequent ``prek`` /
        # ``script/run-in-env.py`` steps find the deps without a
        # ``uv run`` prefix.
-        uses: astral-sh/setup-uv@c18668ad3cf93ea998bef934396af7bb5c839dc7 # v10.2.0
+        uses: astral-sh/setup-uv@1c37ad07a6a961277cf70c0d37d6f313000f5884 # v10.3.0
        with:
          enable-cache: true
          # Pin uv version so the action does not have to fetch the
@@ -10,7 +10,7 @@ ci:
 repos:
  - repo: https://github.com/astral-sh/ruff-pre-commit
    # Ruff version.
-    rev: v0.16.9
+    rev: v0.17.0
    hooks:
      # Run the linter.
      - id: ruff
@@ -36,7 +36,7 @@ repos:
      - id: end-of-file-fixer
      - id: trailing-whitespace
  - repo: https://github.com/asottile/pyupgrade
-    rev: v3.21.2
+    rev: v3.22.0
    hooks:
      - id: pyupgrade
        args: [--py312-plus]
@@ -67,6 +67,7 @@ file does, and it is the authority when they disagree. The most useful starting
        - Function-local constants: `lower_snake_case`
        - Protected/private fields: `lower_snake_case_with_trailing_underscore_`
        - Favor descriptive names over abbreviations
+        - Device components are named brand plus model (`siemens_ira211`), without a protocol-family prefix
        - Enumerator names: prefix every value of an `enum class` with the enum name converted to
          `UPPER_SNAKE_CASE` (e.g. `UARTFlushResult::UART_FLUSH_RESULT_SUCCESS`). Never use bare
          names like `SUCCESS`, `FAILURE`, `OK`, or `FAIL`: platform SDK headers define macros with
@@ -143,6 +144,9 @@ file does, and it is the authority when they disagree. The most useful starting

 *   **C++ Preprocessor Directives:**
    *   **Avoid `#define` for constants:** Using `#define` for constants is discouraged and should be replaced with `const` variables or enums.
+    *   **A constant with a compile-time initializer is `static constexpr`,** not `static const`, at namespace scope
+        and inside functions; `static const` is only for a value computed at run time. A function-local
+        `static constexpr` table is a static constant to clang-tidy, so it is `UPPER_SNAKE_CASE` too.
    *   **Use `#define` only for:**
        - Conditional compilation (`#ifdef`, `#ifndef`)
        - Compile-time sizes calculated during Python code generation (e.g., configuring `std::array` or `StaticVector` dimensions via `cg.add_define()`)
@@ -177,6 +181,15 @@ file does, and it is the authority when they disagree. The most useful starting
        Pick the primitive by cadence: under 250 ms use a gated `loop()`; 500 ms and above use
        `set_interval`. Full reasoning, including why `set_interval` costs more below 500 ms:
        https://developers.esphome.io/architecture/components/advanced/#quick-rule-of-thumb
+    *   **Repeating work:** use `set_interval`, never a `set_timeout` that re-arms itself; every re-arm
+        rebuilds the callback and re-queues a scheduler item, and the period drifts.
+    *   **Scheduler ids:** name a timer only when it must be cancelled or replaced, and use a
+        `static constexpr uint32_t` id, never a string. Ids are per component instance and cannot clash with other
+        components, so number them from 0 and keep all of a component's ids together in one place.
+        ```cpp
+        static constexpr uint32_t READ_TIMEOUT_ID = 0;
+        this->set_timeout(READ_TIMEOUT_ID, 50, [this]() { this->read_(); });
+        ```
    *   **Don't override a default with the same value:** if a base class method already returns what you
        want, do not override it. `Component::get_setup_priority()` returns `setup_priority::DATA`, so a
        component that wants `DATA` should simply leave it alone.
@@ -184,6 +197,36 @@ file does, and it is the authority when they disagree. The most useful starting
        // Bad - this is exactly what the base class already does
        float get_setup_priority() const override { return setup_priority::DATA; }
        ```
+    *   **Constant data lives in RAM on ESP8266** unless marked `PROGMEM`: `const` tables, class-scope
+        constant arrays, and in-class `std::array` initializers (a `.rodata` template plus a copy). Mark the
+        table `PROGMEM` and read it with `progmem_memcpy()` or `progmem_read_byte()` (`esphome/core/hal.h`);
+        for a table of structs copy the whole entry out and return the copy, never a pointer into flash.
+        On other platforms they are a plain `memcpy` and dereference, so no `#ifdef` is needed. Declare log tags with
+        `ESPHOME_LOG_TAG(TAG, "name")`, pass status text as `LOG_STR`, e.g.
+        `this->mark_failed(LOG_STR(ESP_LOG_MSG_COMM_FAIL))`, and give an action whose payload is a byte array
+        a `TEMPLATABLE_BYTES` field so a static code stays in flash.
+    *   **Fixed sets of names** (status words, model names): a `PROGMEM_STRING_TABLE` (`esphome/core/progmem.h`),
+        logged with `get_log_str` and `LOG_STR_ARG`, copied out with `ESPHOME_strncpy_P` before `publish_state`.
+        A `dump_config` helper that picks a name returns `const LogString *` from `LOG_STR(...)`.
+    *   **CRCs and bit tricks** come from `esphome/core/helpers.h` (`crc8`, `crc16`, `reverse_bits`, `encode_uint16`);
+        pick the helper's polynomial and bit-order arguments instead of writing a CRC loop.
+    *   **An unset float is `NAN`**, not `optional<float>`; the optional costs 4 to 8 bytes of padding per member.
+    *   **`PollingComponent` first runs `update()`** after a random share of the interval; call `this->update()` at the
+        end of `setup()` when the entities need a state at boot.
+    *   **A multi-step command sequence** leaves the step pending when the answer is malformed, so the existing
+        resend and give-up logic handles it; never advance on an answer that was only logged.
+    *   **Entities that each watch a register field:** one class taking register, shift, mask and match from a Python
+        tuple table, in typed `StaticVector`s sized by `cg.slot_counter`; not a template per bit, not a virtual
+        listener base (a second vptr per entity).
+    *   **A global feature define** says the code is compiled in, not that this instance uses it: keep the
+        per-instance check (`if (this->aux_device_ == ...)`) inside the `#ifdef`.
+    *   **Model-specific code** sits behind a define the Python side emits only for configs that use that model
+        (`cg.add_define("USE_SELEC_METER_EM4M")`), so the other models' builds leave it out; the runtime model check
+        stays inside the `#ifdef`.
+    *   **Failures after `setup()`:** `mark_failed()` is for `setup()` only. A runtime read or write failure
+        sets `status_set_warning()` and the next success clears it; writes skip work when `is_failed()`.
+    *   **Fixed platform facts compile to nothing:** gate on `#ifdef USE_ESP8266` and friends, not on a
+        runtime check of something the build already knows.
    *   **Logging string literals:** wrap literals passed as `%s` arguments in `LOG_STR_LITERAL()` so they
        can be stored in flash rather than RAM.
        ```cpp
@@ -230,6 +273,10 @@ file does, and it is the authority when they disagree. The most useful starting
        ```

    *   **Component Metadata:**
+        - `DOMAIN`: Required in every component's `__init__.py`, set to the component's own name as a plain
+          string (e.g. `DOMAIN = "my_component"`). Other code refers to the component through it, e.g.
+          `from esphome.components.my_component import DOMAIN`. Keep it in alphabetical order with the other
+          metadata constants. CI (`lint_component_domain`) fails without it.
        - `DEPENDENCIES`: List of required components
        - `AUTO_LOAD`: Components to automatically load
        - `CONFLICTS_WITH`: Incompatible components
@@ -243,6 +290,7 @@ file does, and it is the authority when they disagree. The most useful starting
        import esphome.config_validation as cv
        from esphome.const import CONF_KEY, CONF_ID

+        DOMAIN = "my_component"
        CONF_PARAM = "param"  # A constant that does not yet exist in esphome/const.py

        my_component_ns = cg.esphome_ns.namespace("my_component")
@@ -384,6 +432,25 @@ file does, and it is the authority when they disagree. The most useful starting
                )
        ```

+        When the callback's parameters differ from the automation's arguments, or the trigger should only
+        fire for some values, pass `params`, `forward` and `when`; the helper then generates a capture-less
+        lambda (stored inline, nothing allocated). Name the parent with `automation.parent_ref(var)` and build
+        `forward` from `MockObj` calls, not f-strings of C++:
+        ```python
+        parent = automation.parent_ref(var)
+        index = cg.RawExpression("index")
+        await automation.build_callback_automation(
+            var,
+            "add_on_state_callback",
+            [(cg.StringRef, "x"), (cg.size_t, "i")],
+            conf,
+            params=[(cg.size_t, "index")],
+            forward=[cg.StringRef(parent.option_at(index)), index],
+        )
+        ```
+        `build_parent_callback_automation`, `build_trigger_callback`, `build_callback_automations` and
+        `build_trigger_automations` cover the other shapes; see their docstrings in `esphome/automation.py`.
+
        **C++ -- no trigger class needed.** The callback registration method must be templatized to accept both `std::function` and lightweight forwarder structs (which avoid heap allocation):
        ```cpp
        class MyComponent : public Component {
@@ -503,8 +570,12 @@ file does, and it is the authority when they disagree. The most useful starting
        `cover.is_open`, `rtttl.is_playing` and `component.is_idle` are in-tree examples.

 *   **Type Hints:** Type-hint all function signatures, including test functions and config validators (e.g. `def validate_x(config: ConfigType) -> ConfigType:`, `def test_x() -> None:`). Import `ConfigType` from `esphome.types`.
+    An intentionally empty body (an unused `register_dumper` builder, for example) gets a one-line docstring, not `pass`.

 *   **Configuration Validation:**
+    *   **One schema per model:** when a component's options depend on a `model` key, use `cv.typed_schema({...},
+        key=CONF_MODEL, default_type=...)` with each model's own keys and defaults, not one schema plus a validator
+        that rejects keys and fills defaults afterwards.
    *   **Reuse existing validators:** Before writing a custom validator, check for an existing one in `config_validation.py` and compose it in `cv.All(...)` rather than duplicating logic across components. For example, rename a config key with `cv.rename_key(CONF_OLD, CONF_NEW, removed_in="2026.6.0")`, and reject mutually-exclusive keys with `cv.has_at_most_one_key(...)` / `cv.has_exactly_one_key(...)`. See how `api` composes `cv.has_exactly_one_key` + `cv.rename_key`.
    *   **Common Validators:** `cv.int_`, `cv.float_`, `cv.string`, `cv.boolean`, `cv.int_range(min=0, max=100)`, `cv.positive_int`, `cv.percentage`.
    *   **Complex Validation:** `cv.All(cv.string, cv.Length(min=1, max=50))`, `cv.Any(cv.int_, cv.string)`.
@@ -538,6 +609,18 @@ file does, and it is the authority when they disagree. The most useful starting
 *   **Testing:**
    *   **Python:** Run unit tests with `pytest`.
    *   **C++:** Use `clang-tidy` for static analysis.
+    *   **C++ unit tests:** gtests in `tests/components/<component>/*.cpp`, run with
+        `script/cpp_unit_test.py <component>`; see `tests/components/README.md`. Set the loop clock in a test
+        with `LoopBlockingGuard{nullptr, nullptr, now_ms}`; the runner resets it before every test.
+    *   **Integration tests:** `tests/integration/` runs real firmware on the host. Serial components prove
+        timeouts and recovery with the `uart_mock` fixture (`tests/integration/test_uart_mock_*.py`). Its
+        `responses` match on content every time they see it; to answer a repeated request differently, use an
+        `on_tx` lambda with a static counter and `inject_to_rx_buffer` (see `uart_mock_ld2412_requery_after_giveup.yaml`).
+    *   **Keep build-test variants few:** one `test.<platform>.yaml` per platform the code actually differs
+        on. A variant per board for platform-identical code only adds CI time.
+    *   **A test that needs a shared component in a particular state** (`esp32_ble` security settings, an option
+        that PSRAM rejects) cannot be grouped: the merged block wins and the whole batch fails. Add the component to
+        `ISOLATED_COMPONENTS` in `script/analyze_component_buses.py`, or move the option to a `test-<variant>` file.
    *   **Component Tests:** YAML-based compilation tests are located in `tests/`. The structure is as follows:
        ```
        tests/
@@ -584,6 +667,7 @@ file does, and it is the authority when they disagree. The most useful starting
            name: My Sensor
        ```
        Components that define buses directly are flagged as "NEEDS MIGRATION" and cannot be grouped, increasing CI build time.
+        `!extend` and `!remove` in a `test.*.yaml` also make the component ungroupable; add a standalone entity with its own id instead.

    *   **Testing All Components Together:** To verify that all components can be tested together without ID conflicts or configuration issues, use:
        ```bash
@@ -39,9 +39,12 @@ esphome/components/am43/sensor/* @buxtronix
 esphome/components/analog_threshold/* @ianchi
 esphome/components/animation/* @syndlex
 esphome/components/anova/* @buxtronix
+esphome/components/apc1/* @ademuri
 esphome/components/apds9306/* @aodrenah
+esphome/components/apds9930/* @iyesin
 esphome/components/api/* @esphome/core
 esphome/components/aqi/* @freekode @jasstrong @ximex
+esphome/components/aranet/* @patrickod
 esphome/components/as5600/* @ammmze
 esphome/components/as5600/sensor/* @ammmze
 esphome/components/as7341/* @mrgnr
@@ -65,6 +68,7 @@ esphome/components/bedjet/climate/* @jhansche
 esphome/components/bedjet/fan/* @jhansche
 esphome/components/bedjet/sensor/* @javawizard @jhansche
 esphome/components/beken_spi_led_strip/* @Mat931
+esphome/components/bh1745/* @latonita
 esphome/components/bh1750/* @OttoWinter
 esphome/components/bh1900nux/* @B48D81EFCC
 esphome/components/binary_sensor/* @esphome/core
@@ -100,6 +104,9 @@ esphome/components/bmp581_i2c/* @danielkent-net @kahrendt
 esphome/components/bmp581_spi/* @danielkent-net @kahrendt
 esphome/components/bp1658cj/* @Cossid
 esphome/components/bp5758d/* @Cossid
+esphome/components/bq25186/* @Rapsssito
+esphome/components/bq27220/* @rggammon
+esphome/components/bq76972/* @limpkin
 esphome/components/bridge/* @kbx81
 esphome/components/bthome_mithermometer/* @nagyrobi
 esphome/components/button/* @esphome/core
@@ -156,8 +163,10 @@ esphome/components/ds1307/* @badbadc0ffee
 esphome/components/ds1603l/* @JakeLC15
 esphome/components/ds2484/* @mrk-its
 esphome/components/ds248x/* @tomwellnitz
+esphome/components/ds3231/* @linkedupbits
 esphome/components/dsmr/* @glmnet @PolarGoose
 esphome/components/duty_time/* @dudanov
+esphome/components/ecocomfort2/* @gledian
 esphome/components/ee895/* @Stock-M
 esphome/components/ektf2232/touchscreen/* @jesserockz
 esphome/components/emc2101/* @ellull
@@ -174,6 +183,7 @@ esphome/components/es7243e/* @kbx81
 esphome/components/es8156/* @kbx81
 esphome/components/es8311/* @kahrendt @kroimon
 esphome/components/es8388/* @P4uLT
+esphome/components/es9038q2m_katana/* @GioMez
 esphome/components/esp32/* @esphome/core
 esphome/components/esp32_ble/* @bdraco @jesserockz @Rapsssito
 esphome/components/esp32_ble_client/* @bdraco @jesserockz
@@ -183,26 +193,34 @@ esphome/components/esp32_camera_web_server/* @ayufan
 esphome/components/esp32_can/* @Sympatron
 esphome/components/esp32_hosted/* @swoboda1337
 esphome/components/esp32_hosted/update/* @swoboda1337
+esphome/components/esp32_power_management/* @rwrozelle
 esphome/components/esp32_rmt/* @jesserockz
 esphome/components/esp32_rmt_led_strip/* @jesserockz
 esphome/components/esp8266/* @esphome/core
 esphome/components/esp_ldo/* @clydebarrow
+esphome/components/espectre/* @francescopace
+esphome/components/esphome/ota/* @esphome/core
 esphome/components/espnow/* @jesserockz
 esphome/components/espnow/packet_transport/* @EasilyBoredEngineer
 esphome/components/ethernet_info/* @gtjadsonsantos
 esphome/components/event/* @nohat
+esphome/components/exponential_moving_average/* @clydebarrow
 esphome/components/exposure_notifications/* @OttoWinter
 esphome/components/ezo/* @ssieb
 esphome/components/ezo_pmp/* @carlos-sarmiento
+esphome/components/ezsp_proxy_tap/* @kbx81 @puddly
 esphome/components/factory_reset/* @anatoly-savchenkov
 esphome/components/fastled_base/* @OttoWinter
 esphome/components/feedback/* @ianchi
 esphome/components/file/* @esphome/core
+esphome/components/filter_lifetime/* @tuct
 esphome/components/fingerprint_grow/* @alexborro @loongyh @OnFreund
 esphome/components/font/* @clydebarrow @esphome/core
+esphome/components/friedrich/* @rwrozelle
 esphome/components/fs3000/* @kahrendt
 esphome/components/ft5x06/* @clydebarrow
 esphome/components/ft63x6/* @gpambrozio
+esphome/components/fusb302b/* @remcom
 esphome/components/gcja5/* @gcormier
 esphome/components/gdk101/* @Szewcson
 esphome/components/gl_r01_i2c/* @pkejval
@@ -224,9 +242,13 @@ esphome/components/gt911/* @clydebarrow @jesserockz
 esphome/components/haier/* @paveldn
 esphome/components/haier/binary_sensor/* @paveldn
 esphome/components/haier/button/* @paveldn
+esphome/components/haier/select/* @paveldn
 esphome/components/haier/sensor/* @paveldn
 esphome/components/haier/switch/* @paveldn
 esphome/components/haier/text_sensor/* @paveldn
+esphome/components/haier_tundra/* @fauxpark
+esphome/components/haier_tundra/button/* @fauxpark
+esphome/components/haier_tundra/switch/* @fauxpark
 esphome/components/havells_solar/* @sourabhjaiswal
 esphome/components/hbridge/fan/* @WeekendWarrior
 esphome/components/hbridge/light/* @DotNetDann
@@ -245,8 +267,11 @@ esphome/components/hmac_md5/* @dwmw2
 esphome/components/hmac_sha256/* @dwmw2
 esphome/components/hoermann_hcp/* @zweckj
 esphome/components/homeassistant/* @esphome/core @OttoWinter
+esphome/components/homeassistant/button/* @jesserockz
 esphome/components/homeassistant/number/* @landonr
+esphome/components/homeassistant/select/* @jesserockz
 esphome/components/homeassistant/switch/* @Links2004
+esphome/components/homeassistant/text/* @jesserockz
 esphome/components/honeywell_hih_i2c/* @Benichou34
 esphome/components/honeywellabp/* @RubyBailey
 esphome/components/honeywellabp2_i2c/* @jpfaff
@@ -258,6 +283,7 @@ esphome/components/http_request/ota/* @oarcher
 esphome/components/http_request/update/* @jesserockz
 esphome/components/htu31d/* @betterengineering
 esphome/components/hub75/* @stuartparmenter
+esphome/components/husb238/* @latonita
 esphome/components/hydreon_rgxx/* @functionpointer
 esphome/components/hyt271/* @Philippe12
 esphome/components/i2c/* @esphome/core
@@ -265,7 +291,9 @@ esphome/components/i2c_device/* @gabest11
 esphome/components/i2s_audio/* @jesserockz
 esphome/components/i2s_audio/microphone/* @jesserockz
 esphome/components/i2s_audio/speaker/* @jesserockz @kahrendt
+esphome/components/i2s_clockless_led_strip/* @j9brown
 esphome/components/iaqcore/* @yozik04
+esphome/components/icm20689/* @lboue
 esphome/components/icnt86/* @danepowell
 esphome/components/ili9xxx/* @clydebarrow @nielsnl68
 esphome/components/improv_base/* @esphome/core
@@ -282,6 +310,7 @@ esphome/components/inkplate/* @jesserockz @JosipKuci
 esphome/components/integration/* @OttoWinter
 esphome/components/internal_temperature/* @Mat931
 esphome/components/interval/* @esphome/core
+esphome/components/ir_rf_base/* @bdraco @kbx81
 esphome/components/ir_rf_proxy/* @kbx81
 esphome/components/it8951/* @koosoli @limengdu @Passific
 esphome/components/jsn_sr04t/* @Mafus1
@@ -293,9 +322,11 @@ esphome/components/kuntze/* @ssieb
 esphome/components/lc709203f/* @ilikecake
 esphome/components/lcd_menu/* @numo68
 esphome/components/ld2410/* @regevbr @sebcaps
+esphome/components/ld2410s/* @NovakIrs
 esphome/components/ld2412/* @Rihan9
 esphome/components/ld2420/* @descipher
 esphome/components/ld2450/* @hareeshmu
+esphome/components/ld2460/* @jesusvallejo
 esphome/components/ld24xx/* @kbx81
 esphome/components/ld6002b/* @hepter
 esphome/components/ledc/* @OttoWinter
@@ -304,6 +335,10 @@ esphome/components/libretiny_pwm/* @kuba2k2
 esphome/components/light/* @esphome/core
 esphome/components/lightwaverf/* @max246
 esphome/components/lilygo_t5_47/touchscreen/* @jesserockz
+esphome/components/lis2dw12/* @latonita
+esphome/components/lis2dw12_i2c/* @latonita
+esphome/components/lis2dw12_spi/* @latonita
+esphome/components/lis3dh/* @zebble
 esphome/components/lm75b/* @beormund
 esphome/components/ln882h_ble/* @Bl00d-B0b
 esphome/components/ln882h_ble_tracker/* @Bl00d-B0b
@@ -311,6 +346,7 @@ esphome/components/ln882x/* @lamauny
 esphome/components/lock/* @esphome/core
 esphome/components/logger/* @esphome/core
 esphome/components/logger/select/* @clydebarrow
+esphome/components/lp5562/* @DennisGaida
 esphome/components/lps22/* @nagisa
 esphome/components/lsm6ds/* @clydebarrow
 esphome/components/ltr390/* @latonita @sjtrny
@@ -321,7 +357,9 @@ esphome/components/m5stack_8angle/* @rnauber
 esphome/components/mapping/* @clydebarrow
 esphome/components/matrix_keypad/* @ssieb
 esphome/components/max17043/* @blacknell
+esphome/components/max17048/* @B48D81EFCC
 esphome/components/max31865/* @DAVe3283
+esphome/components/max31888/* @JiriPrchal
 esphome/components/max44009/* @berfenger
 esphome/components/max6956/* @looping40
 esphome/components/max7219digit/* @rspaargaren
@@ -340,7 +378,6 @@ esphome/components/mcp4461/* @p1ngb4ck
 esphome/components/mcp4728/* @berfenger
 esphome/components/mcp47a1/* @jesserockz
 esphome/components/mcp9600/* @mreditor97
-esphome/components/mcp9808/* @k7hpn
 esphome/components/md5/* @esphome/core
 esphome/components/mdns/* @esphome/core
 esphome/components/media_player/* @jesserockz
@@ -351,9 +388,11 @@ esphome/components/microphone/* @jesserockz @kahrendt
 esphome/components/mics_4514/* @jesserockz
 esphome/components/midea/* @dudanov
 esphome/components/midea_ir/* @dudanov
+esphome/components/midea_portasplit/* @Fexiven
 esphome/components/mipi_dsi/* @clydebarrow
 esphome/components/mipi_rgb/* @clydebarrow
 esphome/components/mipi_spi/* @clydebarrow
+esphome/components/mistral_ir/* @lerhum
 esphome/components/mitsubishi/* @RubyBailey
 esphome/components/mitsubishi_cn105/* @crnjan
 esphome/components/mixer/speaker/* @kahrendt
@@ -392,6 +431,8 @@ esphome/components/noblex/* @AGalfra
 esphome/components/noise/* @esphome/core
 esphome/components/npi19/* @bakerkj
 esphome/components/nrf52/* @tomaszduda23
+esphome/components/ns2009/* @tchilov
+esphome/components/ns2009/touchscreen/* @tchilov
 esphome/components/number/* @esphome/core
 esphome/components/one_wire/* @ssieb
 esphome/components/online_image/* @clydebarrow @guillempages
@@ -402,10 +443,12 @@ esphome/components/ota/* @esphome/core
 esphome/components/output/* @esphome/core
 esphome/components/packet_transport/* @clydebarrow
 esphome/components/pca6416a/* @Mat931
+esphome/components/pca9505/* @ajfriesen @ssieb
 esphome/components/pca9554/* @bdraco @clydebarrow @hwstar
 esphome/components/pcf85063/* @brogon
 esphome/components/pcf8563/* @KoenBreeman
 esphome/components/pcm5122/* @remcom
+esphome/components/pd_pioneer_ir/* @martinsah
 esphome/components/pi4ioe5v6408/* @jesserockz
 esphome/components/pid/* @OttoWinter
 esphome/components/pipsolar/* @andreashergert1984
@@ -424,6 +467,7 @@ esphome/components/pn7160/* @jesserockz @kbx81
 esphome/components/pn7160_i2c/* @jesserockz @kbx81
 esphome/components/pn7160_spi/* @jesserockz @kbx81
 esphome/components/pn71xx/* @jesserockz @kbx81
+esphome/components/power_management/* @rwrozelle
 esphome/components/power_supply/* @esphome/core
 esphome/components/preferences/* @esphome/core
 esphome/components/provisioning/* @esphome/core
@@ -444,6 +488,8 @@ esphome/components/rc522/* @glmnet
 esphome/components/rc522_i2c/* @glmnet
 esphome/components/rc522_spi/* @glmnet
 esphome/components/rd03d/* @jasstrong
+esphome/components/remko_ar715/* @naKruul
+esphome/components/renogy_inverter_ble/* @emilioaray-dev
 esphome/components/resampler/speaker/* @kahrendt
 esphome/components/restart/* @esphome/core
 esphome/components/rf_bridge/* @jesserockz
@@ -463,6 +509,7 @@ esphome/components/runtime_stats/* @bdraco
 esphome/components/rx8025t/* @remcom
 esphome/components/rx8130/* @beormund
 esphome/components/safe_mode/* @jsuanet @kbx81 @paulmonigatti
+esphome/components/samsung/* @jorofi
 esphome/components/scd4x/* @martgras @sjtrny
 esphome/components/script/* @esphome/core
 esphome/components/sdl/* @bdm310 @clydebarrow
@@ -491,11 +538,14 @@ esphome/components/sfa30/* @ghsensdev
 esphome/components/sfa40/* @NoQuarrel
 esphome/components/sgp40/* @SenexCrenshaw
 esphome/components/sgp4x/* @martgras @SenexCrenshaw
+esphome/components/sh1122_base/* @pl4nkton
+esphome/components/sh1122_spi/* @pl4nkton
 esphome/components/sha256/* @esphome/core
 esphome/components/shelly_dimmer/* @edge90 @rnauber
 esphome/components/sht3xd/* @mrtoy-me
 esphome/components/sht4x/* @sjtrny
 esphome/components/shutdown/* @esphome/core @jsuanet
+esphome/components/siemens_ira211/* @fonix232
 esphome/components/sigma_delta_output/* @Cat-Ion
 esphome/components/sim800l/* @glmnet
 esphome/components/sm10bit_base/* @Cossid
@@ -512,6 +562,7 @@ esphome/components/sound_level/* @kahrendt
 esphome/components/spa06_base/* @danielkent-net
 esphome/components/spa06_i2c/* @danielkent-net
 esphome/components/spa06_spi/* @danielkent-net
+esphome/components/spd2010/* @grischard
 esphome/components/speaker/* @jesserockz @kahrendt
 esphome/components/speaker/media_player/* @kahrendt @synesthesiam
 esphome/components/speaker_source/* @kahrendt
@@ -557,12 +608,13 @@ esphome/components/t6615/* @tylermenezes
 esphome/components/tas2780/* @remcom
 esphome/components/tas58xx/* @mrtoy-me @remcom
 esphome/components/tc74/* @sethgirvan
+esphome/components/tca8418/* @zebble
 esphome/components/tca9548a/* @andreashergert1984
 esphome/components/tca9555/* @mobrembski
 esphome/components/tcl112/* @glmnet
 esphome/components/tcp_uart/* @Bascht74
 esphome/components/tee501/* @Stock-M
-esphome/components/teleinfo/* @0hax
+esphome/components/teleinfo/* @0hax @FredM67
 esphome/components/tem3200/* @bakerkj
 esphome/components/template/alarm_control_panel/* @grahambrown11 @hwstar
 esphome/components/template/datetime/* @rfdarter
@@ -574,12 +626,15 @@ esphome/components/thermopro_ble/* @sittner
 esphome/components/thermostat/* @kbx81
 esphome/components/time/* @esphome/core
 esphome/components/tinyusb/* @kbx81
+esphome/components/tinyusb_keyboard/* @frederikbolding
 esphome/components/tlc5947/* @rnauber
 esphome/components/tlc5971/* @IJIJI
 esphome/components/tm1621/* @Philippe12
 esphome/components/tm1637/* @glmnet
 esphome/components/tm1638/* @skykingjwc
 esphome/components/tm1651/* @mrtoy-me
+esphome/components/tmc2209/* @remcom
+esphome/components/tmc22xx/* @remcom
 esphome/components/tmp102/* @timsavage
 esphome/components/tmp1075/* @sybrenstuvel
 esphome/components/tmp117/* @Azimath
@@ -608,6 +663,7 @@ esphome/components/ufire_ec/* @pvizeli
 esphome/components/ufire_ise/* @pvizeli
 esphome/components/ufm01/* @ljungqvist
 esphome/components/ultrasonic/* @ssieb @swoboda1337
+esphome/components/unicode/* @esphome/core
 esphome/components/update/* @jesserockz
 esphome/components/uponor_smatrix/* @kroimon
 esphome/components/usb_cdc_acm/* @kbx81
@@ -630,7 +686,7 @@ esphome/components/web_server_idf/* @dentra
 esphome/components/weikai/* @DrCoolZic
 esphome/components/weikai_i2c/* @DrCoolZic
 esphome/components/weikai_spi/* @DrCoolZic
-esphome/components/whirlpool/* @glmnet
+esphome/components/whirlpool/* @arpena @glmnet
 esphome/components/whynter/* @aeonsablaze
 esphome/components/wiegand/* @ssieb
 esphome/components/wireguard/* @droscy @lhoracek @thomas0bernard
@@ -651,6 +707,7 @@ esphome/components/xiaomi_body_scale/* @dckiller51
 esphome/components/xiaomi_hhccjcy10/* @fariouche
 esphome/components/xiaomi_lywsd02mmc/* @juanluss31
 esphome/components/xiaomi_lywsd03mmc/* @ahpohl
+esphome/components/xiaomi_mccgq02hl/* @ahpohl @morph027
 esphome/components/xiaomi_mhoc303/* @drug123
 esphome/components/xiaomi_mhoc401/* @vevsvevs
 esphome/components/xiaomi_rtcgq02lm/* @jesserockz
@@ -48,7 +48,7 @@ PROJECT_NAME           = ESPHome
 # could be handy for archiving the generated documentation or if some version
 # control system is used.

-PROJECT_NUMBER         = 2026.10.0-dev
+PROJECT_NUMBER         = 2026.11.0-dev

 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a
@@ -22,7 +22,7 @@ RUN \
    -r /requirements.txt

 # Install the ESPHome Device Builder dashboard.
-RUN uv pip install --no-cache-dir esphome-device-builder==1.19.0
+RUN uv pip install --no-cache-dir esphome-device-builder==1.23.1

 RUN \
    platformio settings set enable_telemetry No \
@@ -7,6 +7,7 @@ import importlib
 import logging
 import os
 from pathlib import Path
+import platform
 import re
 import sys
 import time
@@ -47,14 +48,18 @@ from esphome.const import (
    CONF_WEB_SERVER,
    CONF_WIFI,
    ENV_NOGITIGNORE,
+    KEY_CORE,
    KEY_ESP32,
+    KEY_TARGET_PLATFORM,
    KEY_VARIANT,
+    PLATFORM_HOST,
    SECRETS_FILES,
+    ErrorFormat,
    Toolchain,
 )
 from esphome.core import CORE, EsphomeError, coroutine
 from esphome.enum import StrEnum
-from esphome.helpers import get_bool_env, indent, is_ip_address
+from esphome.helpers import IS_MACOS, get_bool_env, indent, is_ip_address
 from esphome.log import AnsiFore, color, setup_log
 from esphome.stacktrace import LogLineProcessor
 from esphome.types import ConfigType
@@ -68,6 +73,7 @@ from esphome.util import (
    get_serial_ports,
    is_picotool_usb_permission_error,
    list_yaml_files,
+    read_secret_line,
    run_external_command,
    run_external_process,
    safe_print,
@@ -477,12 +483,9 @@ def has_ota() -> bool:

 def has_native_ota() -> bool:
    """Check if native API OTA upload is available (``platform: esphome``)."""
-    if CONF_OTA not in CORE.config:
-        return False
-    return any(
-        ota_item.get(CONF_PLATFORM) == CONF_ESPHOME
-        for ota_item in CORE.config[CONF_OTA]
-    )
+    from esphome.espota2 import esphome_ota_items
+
+    return bool(esphome_ota_items(CORE.config))


 def has_web_server_ota() -> bool:
@@ -829,9 +832,9 @@ def write_cpp_file() -> int:

 def compile_program(args: ArgsProtocol, config: ConfigType) -> int:
    if CORE.skip_bootloader and not (CORE.is_esp32 and CORE.using_toolchain_esp_idf):
-        # Info, not a warning: an orchestrator cannot see YAML toolchain
-        # overrides, this is its expected no-op, and a full build is safe.
-        _LOGGER.info(
+        # Debug only: an orchestrator cannot see YAML toolchain overrides,
+        # so this is its expected no-op, and a full build is safe.
+        _LOGGER.debug(
            "--skip-bootloader ignored: only supported on ESP32 with the "
            "esp-idf toolchain"
        )
@@ -1230,14 +1233,28 @@ def upload_program(
    config: ConfigType, args: ArgsProtocol, devices: list[str]
 ) -> tuple[int, str | None]:
    host = devices[0]
+    port_type = get_port_type(host)
+    ota_key = getattr(args, "ota_key", None)
+    if ota_key and port_type in (PortType.SERIAL, PortType.BOOTSEL):
+        _LOGGER.warning(
+            "The presented OTA key only applies to network uploads; ignored for %s",
+            host,
+        )
+
    platform_upload = platform_hooks.get_platform_hook(
        CORE.target_platform, "upload_program"
    )
    if platform_upload is not None and platform_upload(config, args, host):
+        if ota_key and port_type not in (PortType.SERIAL, PortType.BOOTSEL):
+            # A platform's own network path (nrf52 mcumgr) has no key handshake
+            _LOGGER.warning(
+                "The presented OTA key only applies to the %s OTA platform; "
+                "ignored for %s",
+                CONF_ESPHOME,
+                host,
+            )
        return 0, host

-    port_type = get_port_type(host)
-
    # MQTT and MQTTIP are also OTA paths; MQTTIP gets resolved to a real IP later by
    # _resolve_network_devices(). Only SERIAL and BOOTSEL are non-OTA upload paths.
    is_partition_table = getattr(args, "partition_table", False)
@@ -1280,6 +1297,8 @@ def upload_program(
    network_devices = _resolve_network_devices(devices, config, args)

    if chosen_platform == CONF_WEB_SERVER:
+        if ota_key:
+            raise EsphomeError(OTA_KEY_PLATFORM_ERROR)
        if is_partition_table or is_bootloader:
            raise EsphomeError(
                f"{option_string} is only supported with the esphome OTA platform; "
@@ -1293,6 +1312,17 @@ def upload_program(
    return _upload_via_native_api(config, network_devices, args)


+def _ota_upload_platforms(config: ConfigType) -> dict[str, None]:
+    """The network OTA platforms the config provides, one entry each, in
+    config order; the web_server final-validate hook merges duplicates."""
+    return {
+        ota_platform: None
+        for ota_item in config.get(CONF_OTA, [])
+        if (ota_platform := ota_item.get(CONF_PLATFORM))
+        in (CONF_ESPHOME, CONF_WEB_SERVER)
+    }
+
+
 def _choose_ota_platform(config: ConfigType, requested: str | None) -> str:
    """Pick the OTA platform to use, optionally honoring ``--ota-platform``.

@@ -1305,16 +1335,7 @@ def _choose_ota_platform(config: ConfigType, requested: str | None) -> str:
    stream on ESP32/LibreTiny, which inflate it as it arrives.) Falls back to
    ``web_server`` only when that is the only available platform.
    """
-    # Use a dict (insertion-ordered) instead of a list so error messages and
-    # membership checks see one entry per platform even if the user has
-    # multiple ``ota:`` items of the same platform; the web_server OTA
-    # platform's final-validate hook merges duplicates anyway.
-    available: dict[str, None] = {}
-    for ota_item in config.get(CONF_OTA, []):
-        platform = ota_item.get(CONF_PLATFORM)
-        if platform in (CONF_ESPHOME, CONF_WEB_SERVER):
-            available[platform] = None
-
+    available = _ota_upload_platforms(config)
    if not available:
        raise EsphomeError(
            f"Cannot upload Over the Air as the {CONF_OTA} configuration is not "
@@ -1335,14 +1356,17 @@ def _choose_ota_platform(config: ConfigType, requested: str | None) -> str:
    return CONF_WEB_SERVER


+def _esphome_ota_conf(config: ConfigType) -> ConfigType | None:
+    """The validated esphome OTA platform block, if configured."""
+    from esphome.espota2 import esphome_ota_items
+
+    return next(iter(esphome_ota_items(config)), None)
+
+
 def _upload_via_native_api(
    config: ConfigType, network_devices: list[str], args: ArgsProtocol
 ) -> tuple[int, str | None]:
-    ota_conf: ConfigType = {}
-    for ota_item in config.get(CONF_OTA, []):
-        if ota_item.get(CONF_PLATFORM) == CONF_ESPHOME:
-            ota_conf = ota_item
-            break
+    ota_conf = _esphome_ota_conf(config) or {}

    from esphome import espota2
    from esphome.components.noise import static_encryption_key
@@ -1352,9 +1376,15 @@ def _upload_via_native_api(
    # Fail closed: an encryption block whose key did not resolve must never
    # fall back to a plaintext upload
    noise_psk = None
+    old_noise_psk = None
    plaintext_fallback = False
    allow_plaintext_upload = False
-    if (encryption_conf := ota_conf.get(CONF_ENCRYPTION)) is not None:
+    if ota_key := getattr(args, "ota_key", None):
+        # The user presents a key the device still runs instead of the
+        # configured one (a key change in progress); an explicit key never
+        # downgrades to plaintext
+        noise_psk = ota_key
+    elif (encryption_conf := ota_conf.get(CONF_ENCRYPTION)) is not None:
        noise_psk = encryption_conf.get(CONF_KEY)
        allow_plaintext_upload = bool(
            encryption_conf.get(espota2.CONF_ALLOW_PLAINTEXT_UPLOAD)
@@ -1367,6 +1397,8 @@ def _upload_via_native_api(
        # Ensure the key is a string, as required by the underlying OTA implementation.
        # It arrives here as a SensitiveStr which aioesphomeapi rejects.
        noise_psk = str(noise_psk)
+        if old_key := encryption_conf.get(espota2.CONF_OLD_KEY):
+            old_noise_psk = str(old_key)
    elif api_key := static_encryption_key(config.get(CONF_API) or {}):
        # Remove before 2027.3.0: the api key is tried, falling back to plaintext
        noise_psk = str(api_key)
@@ -1416,19 +1448,30 @@ def _upload_via_native_api(
        noise_psk,
        plaintext_fallback=plaintext_fallback,
        allow_plaintext_upload=allow_plaintext_upload,
+        old_noise_psk=old_noise_psk,
    )


+def _old_key_notice(config: ConfigType) -> None:
+    """After `run`, whose image was just built from this config; a plain
+    `upload` may send a stale image that still carries the previous key."""
+    from esphome import espota2
+
+    for item in espota2.esphome_ota_items(config):
+        if (item.get(CONF_ENCRYPTION) or {}).get(espota2.CONF_OLD_KEY):
+            _LOGGER.warning(espota2.OLD_KEY_REMOVE_NOTICE)
+
+
 def _upload_via_web_server(
    config: ConfigType, network_devices: list[str], binary: Path
 ) -> tuple[int, str | None]:
    from esphome import web_server_ota
+    from esphome.espota2 import esphome_ota_items
    from esphome.web_server_helpers import get_web_server_connection

    if any(
-        ota_item.get(CONF_PLATFORM) == CONF_ESPHOME
-        and ota_item.get(CONF_ENCRYPTION) is not None
-        for ota_item in config.get(CONF_OTA, [])
+        ota_item.get(CONF_ENCRYPTION) is not None
+        for ota_item in esphome_ota_items(config)
    ):
        _LOGGER.warning(
            "This config has OTA encryption, but the web_server OTA path sends "
@@ -1736,7 +1779,60 @@ def command_compile(args: ArgsProtocol, config: ConfigType) -> int | None:
    return 0


+ENV_OTA_KEY = "ESPHOME_OTA_KEY"
+OTA_KEY_PLATFORM_ERROR = (
+    f"--prompt-ota-key and {ENV_OTA_KEY} only apply to the {CONF_ESPHOME} OTA "
+    "platform; to flash by serial instead, name the port with --device"
+)
+
+
+def _read_ota_key(args: ArgsProtocol, config: ConfigType) -> None:
+    """Take the key to present to the device for this upload, from the
+    prompt or from ESPHOME_OTA_KEY, before any compile so the prompt is
+    not buried in build output."""
+    prompt = getattr(args, "prompt_ota_key", False)
+    env_key = getattr(args, "env_ota_key", None)
+    if not prompt and env_key is None:
+        return
+    if CORE.data.get(KEY_CORE, {}).get(KEY_TARGET_PLATFORM) == PLATFORM_HOST:
+        _LOGGER.warning("A host program runs locally; the presented OTA key is ignored")
+        return
+    # The HTTP path has no key handshake; decide before prompting or
+    # compiling. A serial target is a serial flash: the key is not even
+    # asked for, and --ota-platform means nothing to it. Every entry must
+    # be serial: a missing port is skipped and the next entry may be a host
+    devices = getattr(args, "device", None) or []
+    serial_target = bool(devices) and all(
+        device == "SERIAL"
+        or get_port_type(device) in (PortType.SERIAL, PortType.BOOTSEL)
+        for device in devices
+    )
+    chosen = (
+        _choose_ota_platform(config, getattr(args, "ota_platform", None))
+        if not serial_target and _ota_upload_platforms(config)
+        else None
+    )
+    if chosen == CONF_WEB_SERVER:
+        raise EsphomeError(OTA_KEY_PLATFORM_ERROR)
+    from esphome.components.noise import validate_encryption_key
+    from esphome.config_validation import Invalid
+
+    if serial_target:
+        _LOGGER.warning(
+            "The presented OTA key only applies to network uploads; ignored for %s",
+            ", ".join(devices),
+        )
+        return
+    key = read_secret_line("OTA encryption key: ") if prompt else env_key
+    try:
+        validate_encryption_key(key)
+    except Invalid as err:
+        raise EsphomeError(f"Invalid OTA encryption key: {err}") from err
+    args.ota_key = key
+
+
 def command_upload(args: ArgsProtocol, config: ConfigType) -> int | None:
+    _read_ota_key(args, config)
    # Get devices, resolving special identifiers like OTA
    devices = choose_upload_log_host(
        default=args.device,
@@ -1784,6 +1880,7 @@ def command_run(args: ArgsProtocol, config: ConfigType) -> int | None:
        # Elsewhere the flag is ignored, so serial stays fine there.
        _LOGGER.error("--skip-bootloader builds cannot be flashed over serial")
        return 1
+    _read_ota_key(args, config)
    exit_code = write_cpp(config)
    if exit_code != 0:
        return exit_code
@@ -1809,6 +1906,7 @@ def command_run(args: ArgsProtocol, config: ConfigType) -> int | None:
    exit_code, successful_device = upload_program(config, args, devices)
    if exit_code == 0:
        _LOGGER.info("Successfully uploaded program.")
+        _old_key_notice(config)
    else:
        _LOGGER.warning("Failed to upload to %s", devices)
        return exit_code
@@ -1945,7 +2043,10 @@ def run_multiple_configs(
        safe_print()

        cmd = command_builder(f)
-        rc = run_external_process(*cmd)
+        # The parent already logged the Intel macOS warning; children skip it.
+        rc = run_external_process(
+            *cmd, env={**os.environ, _INTEL_MACOS_WARNED_ENV: "1"}
+        )

        if rc == 0:
            print_bar(f"[{color(AnsiFore.BOLD_GREEN, 'SUCCESS')}] {str(f)}")
@@ -2201,6 +2302,25 @@ def _add_states_args(parser: argparse.ArgumentParser) -> None:
    )


+def _error_format(value: str) -> ErrorFormat:
+    try:
+        return ErrorFormat(value.lower())
+    except ValueError:
+        choices = ", ".join(ErrorFormat)
+        raise argparse.ArgumentTypeError(
+            f"invalid choice: '{value}' (choose from {choices})"
+        ) from None
+
+
+ARGUMENT_HELP_PROMPT_OTA_KEY = (
+    "Ask for the OTA encryption key to present to the device instead of using "
+    "the one in the configuration, for a device that still runs a previous key. "
+    "The key is read without echo, or as one line from stdin when that is not "
+    "a terminal; it is never taken from the command line. A calling program "
+    f"can hand the key over in the {ENV_OTA_KEY} environment variable instead."
+)
+
+
 def parse_args(argv):
    options_parser = argparse.ArgumentParser(add_help=False)
    options_parser.add_argument(
@@ -2263,6 +2383,17 @@ def parse_args(argv):
        ),
    )

+    options_parser.add_argument(
+        "--error-format",
+        type=_error_format,
+        metavar="{" + ",".join(f.value for f in ErrorFormat) + "}",
+        help=(
+            "How configuration errors are shown. 'yaml' shows them inside the "
+            "failing YAML; 'line' prints one 'file:line:column: error: message' "
+            "line per error. Default: $ESPHOME_ERROR_FORMAT, else 'yaml'."
+        ),
+    )
+
    parser = argparse.ArgumentParser(
        description=f"ESPHome {const.__version__}", parents=[options_parser]
    )
@@ -2358,6 +2489,11 @@ def parse_args(argv):
        help="Upload as partition table (OTA).",
        action="store_true",
    )
+    parser_upload.add_argument(
+        "--prompt-ota-key",
+        action="store_true",
+        help=ARGUMENT_HELP_PROMPT_OTA_KEY,
+    )
    parser_upload.add_argument(
        "--bootloader",
        help="Upload as bootloader (OTA).",
@@ -2438,6 +2574,11 @@ def parse_args(argv):
            "(HTTP Basic auth) when that is the only configured platform."
        ),
    )
+    parser_run.add_argument(
+        "--prompt-ota-key",
+        action="store_true",
+        help=ARGUMENT_HELP_PROMPT_OTA_KEY,
+    )

    parser_clean = subparsers.add_parser(
        "clean-mqtt",
@@ -2566,9 +2707,18 @@ def parse_args(argv):
        args, unknown_args = parser.parse_known_args(arguments)
        if unknown_args:
            _LOGGER.warning("Ignored unrecognized arguments: %s", unknown_args)
-        return args
+    else:
+        args = parser.parse_args(arguments)

-    return parser.parse_args(arguments)
+    # Read here rather than as the option default, so a bad value is reported
+    # against the environment variable instead of --error-format
+    if args.error_format is None:
+        env_value = os.getenv("ESPHOME_ERROR_FORMAT", ErrorFormat.YAML.value)
+        try:
+            args.error_format = _error_format(env_value)
+        except argparse.ArgumentTypeError as err:
+            parser.error(f"ESPHOME_ERROR_FORMAT: {err}")
+    return args


 def _warn_if_source_tree_mismatch() -> None:
@@ -2614,12 +2764,34 @@ def _warn_if_source_tree_mismatch() -> None:
    )


+_INTEL_MACOS_REMOVAL = "2027.6.0"
+_INTEL_MACOS_WARNED_ENV = "ESPHOME_INTEL_MACOS_WARNED"
+
+
+def _warn_if_intel_macos() -> None:
+    """Warn that Intel (x86_64) Python on macOS loses support by _INTEL_MACOS_REMOVAL."""
+    if (
+        not IS_MACOS
+        or platform.machine() != "x86_64"
+        or _INTEL_MACOS_WARNED_ENV in os.environ
+    ):
+        return
+    _LOGGER.warning(
+        "Support for Intel Macs will end in ESPHome %s or earlier. The Python "
+        "packages ESPHome depends on have stopped publishing Intel macOS builds, "
+        "so future releases will not install on this machine. On an Apple "
+        "Silicon Mac, switch to a native arm64 Python.",
+        _INTEL_MACOS_REMOVAL,
+    )
+
+
 def run_esphome(argv):
    from esphome.address_cache import AddressCache

    args = parse_args(argv)
    CORE.dashboard = args.dashboard
    CORE.testing_mode = args.testing_mode
+    CORE.error_format = args.error_format

    # Create address cache from command-line arguments
    CORE.address_cache = AddressCache.from_cli_args(
@@ -2632,7 +2804,25 @@ def run_esphome(argv):
        args.log_level = "CRITICAL"

    setup_log(log_level=args.log_level)
+    # Taken out of the environment before any command runs, so no build
+    # tool inherits a key a calling program handed over
+    args.env_ota_key = os.environ.pop(ENV_OTA_KEY, None)
+    if args.command in ("upload", "run"):
+        # One key is one device's; several configs run in child processes
+        # that would never see it
+        if (args.env_ota_key is not None or args.prompt_ota_key) and len(
+            args.configuration
+        ) > 1:
+            raise EsphomeError(
+                f"--prompt-ota-key and {ENV_OTA_KEY} take one configuration; "
+                f"{len(args.configuration)} were given"
+            )
+    elif args.env_ota_key is not None:
+        _LOGGER.warning(
+            "%s is set but the %s command does not use it", ENV_OTA_KEY, args.command
+        )
    _warn_if_source_tree_mismatch()
+    _warn_if_intel_macos()

    if args.command in PRE_CONFIG_ACTIONS:
        try:
@@ -49,40 +49,40 @@ class FrameworkRelease(NamedTuple):
 # Arduino core version -> its build in esphome-libs/arduino-esp8266
 FRAMEWORK_RELEASES: dict[Version, FrameworkRelease] = {
    Version(3, 1, 2): FrameworkRelease(
-        "3.1.2-esphome.1",
-        "e80751e3123676b967143e39c61f2d8693946db4c7806f2a83dcaaf797ecd582",
-        37189311,
+        "3.1.2-esphome.3",
+        "3af533a85163804e164500a5b254dc23b922080e25ecb7dc37b3dd8ac84651db",
+        37185650,
    ),
 }

 TOOLCHAIN_PACKAGE = "toolchain-xtensa-lx106-elf"
 # gcc 10.3, the toolchain Arduino core 3.x builds with; the build
 # generator's compile flags are tuned to it.
-TOOLCHAIN_VERSION = "10.3.0-esphome.2"
+TOOLCHAIN_VERSION = "10.3.0-esphome.3"
 _TOOLCHAIN_RELEASES = (
    "https://github.com/esphome-libs/xtensa-lx106-elf-toolchain/releases/"
 )
 # Registry system tag -> (sha256, size) of that host's archive
 TOOLCHAIN_BUILDS: dict[str, tuple[str, int]] = {
    "darwin_arm64": (
-        "849cede44d4d5c6ea0f14099783239f559f46327bea314281814f2652b486201",
-        60830321,
+        "ad0ea929238d9b527c43e0d20257acc2a5680bdb0d2b1cf8f2c99169786217e9",
+        60747260,
    ),
    "darwin_x86_64": (
-        "ca69904daabf0c5983b372423e5e62f49182a793e992c052e94666852470c897",
-        64149487,
+        "997090cac80c8eb59604ec52b73fb3568e5f2d9b2971f83c3f2a5c545c9c949c",
+        64065752,
    ),
    "linux_aarch64": (
-        "60a49a4f082bf246544bd409a9517dbbcab19bb30ac9decbee544b896aaccbd6",
-        67573397,
+        "403f14d0d5755682fcd6eaea1e4c457a1d8cad30690e52fb0c804d8db266b908",
+        67487067,
    ),
    "linux_x86_64": (
-        "1fba33ca1494ec79f2776e0e37eca93282d30f8bb9992f5f4f9a655d6fff1db4",
-        68431336,
+        "64f21fa3ba736b363dc8c234dbbb39e005e574e33de08a78e9a00c55a64ae706",
+        68343668,
    ),
    "windows_amd64": (
-        "af9066b0e5bf036f04f2bd9d08b89b81a7f183c57dac0abcaff71dd861cf5f3b",
-        67664137,
+        "1e62abf8df041ce5158f5770dffef955f2f981ce7f7adee88fcd5a8197705aa6",
+        67536405,
    ),
 }

@@ -1,4 +1,4 @@
-from collections.abc import Callable
+from collections.abc import Awaitable, Callable, Sequence
 from dataclasses import dataclass, field
 import logging
 import string
@@ -21,9 +21,9 @@ from esphome.const import (
    CONF_TYPE_ID,
    CONF_UPDATE_INTERVAL,
 )
-from esphome.core import CORE, ID, EsphomeError, Lambda
+from esphome.core import CORE, ID, EsphomeError, HexInt, Lambda
 from esphome.cpp_generator import (
-    FlashStringLiteral,
+    Expression,
    LambdaExpression,
    MockObj,
    MockObjClass,
@@ -35,6 +35,32 @@ from esphome.types import ConfigType, SafeExpType
 from esphome.util import Registry


+def progmem_bytes(name: str, data: bytes | list[int]) -> MockObj:
+    """Shared PROGMEM table for constant bytes; equal payloads share one, empty is nullptr."""
+    if not data:
+        return cg.nullptr
+    return cg.shared_progmem_array(
+        name, cg.uint8, cg.ArrayInitializer(*(HexInt(x) for x in data))
+    )
+
+
+async def templatable_bytes(
+    value: Any,
+    args: TemplateArgsType,
+    set_template: MockObj,
+    set_static: MockObj,
+    table_name: str,
+) -> None:
+    """Set a TemplatableBytes: a lambda via set_template, constant bytes via set_static."""
+    if cg.is_template(value):
+        fn = await cg.templatable(value, args, cg.std_vector.template(cg.uint8))
+        cg.add(set_template(fn))
+    elif len(value) > 0xFFFF:
+        raise EsphomeError(f"Byte payload is {len(value)} bytes; the maximum is 65535")
+    else:
+        cg.add(set_static(progmem_bytes(table_name, value), len(value)))
+
+
 def maybe_simple_id(*validators):
    """Allow a raw ID to be specified in place of a config block.
    If the value that's being validated is a dictionary, it's passed as-is to the specified validators. Otherwise, it's
@@ -219,11 +245,26 @@ ApplyCondition = cg.esphome_ns.class_("ApplyCondition", Condition)

 def flash_string(config: ConfigType, value: str) -> str:
    """Default renderer for ``std::string`` constants; copies the literal out of flash on ESP8266."""
+    return str(cg.progmem_string(value))
+
+
+def flash_compare(config: ConfigType, value: str) -> str:
+    """Default renderer for ``std::string`` constants in conditions; compares in flash on ESP8266."""
    if CORE.is_esp8266:
-        return f"progmem_string({FlashStringLiteral(value)})"
+        return f"::esphome::ProgmemStringRef{{PSTR({cg.safe_exp(value)}), {len(value.encode('utf-8'))}}}"
    return str(cg.safe_exp(value))


+def _default_std_string(
+    members: list[tuple[str, Any, Any]], renderer: Callable[[ConfigType, str], str]
+) -> list[tuple[str, Any, Any]]:
+    """Give ``cg.std_string`` members without a renderer the given default."""
+    return [
+        (key, t, fn or (renderer if t is cg.std_string else None))
+        for key, t, fn in members
+    ]
+
+
 def literal_with_length(config: ConfigType, value: str) -> str:
    """Renderer for a ``(const char *, size_t)`` target: a plain literal plus its byte length.

@@ -233,13 +274,24 @@ def literal_with_length(config: ConfigType, value: str) -> str:
    return f"{cg.safe_exp(value)}, {len(value.encode('utf-8'))}"


+def string_ref_literal(config: ConfigType, value: str) -> str:
+    """Renderer for a ``StringRef`` comparison: a flash literal on ESP8266, else ``StringRef(literal, length)``."""
+    if CORE.is_esp8266:
+        return str(cg.FlashStringLiteral(value))
+    return f"StringRef({literal_with_length(config, value)})"
+
+
+def _names_parent(text: str) -> bool:
+    return any(f == "parent" for _, f, _, _ in string.Formatter().parse(text))
+
+
@dataclass(frozen=True)
 class ApplyCall:
    """One statement from config keys, e.g. ``"set_range({}, {})"`` with ``((CONF_LOW, cg.float_), ...)``.

    Each arg is ``(conf_key, type_)`` or ``(conf_key, type_, const_fn)``. A ``conf_key`` may be a
-    path into nested sections. A plain ``str`` ``type_`` is raw C++ type text and may use
-    ``{parent}``. ``const_fn(config, value)`` renders a constant's argument text; a lambda or an
+    path into nested sections. ``target`` and a plain ``str`` ``type_`` (raw C++ type text) may
+    name the parent object as ``{parent}``. ``const_fn(config, value)`` renders a constant's argument text; a lambda or an
    id bypasses it. The statement is skipped when none of its keys is set, always emitted when it
    has no keys, and a partial set is a config error.
    """
@@ -251,13 +303,13 @@ class ApplyCall:
        fields = [
            f for _, f, _, _ in string.Formatter().parse(self.target) if f is not None
        ]
-        if any(fields):
+        if any(f not in ("", "parent") for f in fields):
            raise ValueError(
-                f"apply target {self.target!r}: only bare {{}} placeholders"
+                f"apply target {self.target!r}: only {{}} and {{parent}} placeholders"
            )
-        if len(fields) != len(self.args):
+        if (count := fields.count("")) != len(self.args):
            raise ValueError(
-                f"apply target {self.target!r} has {len(fields)} "
+                f"apply target {self.target!r} has {count} "
                f"placeholder(s) for {len(self.args)} config key(s)"
            )
        if any(len(arg) not in (2, 3) for arg in self.args):
@@ -265,6 +317,12 @@ class ApplyCall:
                f"apply target {self.target!r}: each arg is (conf_key, type_[, const_fn])"
            )

+    @property
+    def names_parent(self) -> bool:
+        return _names_parent(self.target) or any(
+            isinstance(arg[1], str) and _names_parent(arg[1]) for arg in self.args
+        )
+
    @property
    def members(self) -> list[tuple[Any, Any, Any]]:
        """Each arg as ``(conf_key, type_, const_fn or None)``."""
@@ -339,9 +397,16 @@ def _check_key_in_schema(
        schema = schema.schema[markers[part]]


+def parent_ref(var: MockObj) -> MockObj:
+    """``var`` named from global scope, so a trigger argument cannot shadow it.
+
+    Also how a generated callback names its Automation.
+    """
+    return MockObj(f"::{var}", "->")
+
+
 async def _apply_parent(config: ConfigType, id_key: str = CONF_ID) -> str:
-    # Global-scope qualified so a trigger arg named like the id cannot shadow it.
-    return f"::{await cg.get_variable(config[id_key])}"
+    return str(parent_ref(await cg.get_variable(config[id_key])))


 def _apply_lambda_args(args: TemplateArgsType) -> TemplateArgsType:
@@ -373,7 +438,7 @@ async def _render_values(
    members: list[tuple[Any, Any, Any]],
    values: list[Any],
    config: ConfigType,
-    parent: str,
+    parent: str | None,
    lambda_args: TemplateArgsType,
    compare: bool = False,
 ) -> list[str]:
@@ -417,6 +482,22 @@ def register_apply_action(
 ) -> None:
    """Register an action that only forwards config values to its parent, with no C++ class.

+    See ``apply_action_builder``.
+    """
+    register_action(name, ApplyAction, schema, synchronous=True)(
+        apply_action_builder(name, schema, *fields, call=call, id_key=id_key)
+    )
+
+
+def apply_action_builder(
+    name: str,
+    schema: cv.Schema,
+    *fields: ApplyField | ApplyCall,
+    call: str | None = None,
+    id_key: str = CONF_ID,
+) -> Callable[..., Awaitable[MockObj]]:
+    """The builder ``register_apply_action`` registers, for a caller that wraps it.
+
    Generates one static function with the parent (read from ``id_key``) and constants baked
    in, lambdas called inline with the trigger args, and an ``ApplyAction`` templated on it.
    A constant that is an id (``cv.use_id`` under ``cv.templatable``) is the object it names.
@@ -427,10 +508,7 @@ def register_apply_action(
    statements_spec = [
        (
            c.target,
-            [
-                (key, t, fn or (flash_string if t is cg.std_string else None))
-                for key, t, fn in c.members
-            ],
+            _default_std_string(c.members, flash_string),
        )
        for c in (f if isinstance(f, ApplyCall) else f.call() for f in fields)
    ]
@@ -451,12 +529,12 @@ def register_apply_action(
        statements: list[str] = []
        for target, members in statements_spec:
            values = _apply_values(config, members)
-            if members and all(value is None for value in values):
+            if not _apply_call_active(members, values):
                continue
            exprs = await _render_values(
                name, target, members, values, config, parent, lambda_args
            )
-            statements.append(f"{receiver}{target.format(*exprs)};")
+            statements.append(f"{receiver}{target.format(*exprs, parent=parent)};")
        if call:
            statements = [
                f"auto apply_call = {parent}->{call}();",
@@ -467,7 +545,28 @@ def register_apply_action(
            action_id, cg.void, template_arg, lambda_args, statements
        )

-    register_action(name, ApplyAction, schema, synchronous=True)(builder)
+    return builder
+
+
+def _apply_call_active(members: list[tuple[Any, Any, Any]], values: list[Any]) -> bool:
+    """An ``ApplyCall`` is emitted unless it has keys and none of them is set."""
+    return not members or any(value is not None for value in values)
+
+
+async def _render_check(
+    name: str,
+    target: str,
+    members: list[tuple[Any, Any, Any]],
+    values: list[Any],
+    config: ConfigType,
+    parent: str | None,
+    lambda_args: TemplateArgsType,
+) -> str:
+    """Render a boolean check with ``values`` compared against config."""
+    exprs = await _render_values(
+        name, target, members, values, config, parent, lambda_args, compare=True
+    )
+    return target.format(*exprs, parent=parent)


 def register_apply_condition(
@@ -478,11 +577,12 @@ def register_apply_condition(
    ``check`` is applied to the parent: ``"is_playing()"`` becomes ``parent->is_playing()``; an
    ``ApplyCall`` such as ``ApplyCall("state == {}", ((CONF_STATE, cg.bool_),))`` compares
    against config values, all of which must be present. Write ``== false`` to negate.
-    String constants are plain literals, so compare a ``std::string`` or ``StringRef`` member.
+    A ``cg.std_string`` constant stays in flash on ESP8266 and supports only ``==`` or ``!=``
+    against a ``std::string`` or ``StringRef`` member; other string types are plain literals.
    Generates one static predicate and an ``ApplyCondition`` templated on it.
    """
    call = check if isinstance(check, ApplyCall) else ApplyCall(check)
-    members = call.members
+    members = _default_std_string(call.members, flash_compare)
    _check_key_in_schema(name, schema, id_key)
    for conf_key, _, _ in members:
        _check_key_in_schema(name, schema, conf_key)
@@ -495,22 +595,16 @@ def register_apply_condition(
    ) -> MockObj:
        parent = await _apply_parent(config, id_key)
        lambda_args = _apply_lambda_args(args)
-        exprs = await _render_values(
-            name,
-            call.target,
-            members,
-            _apply_values(config, members),
-            config,
-            parent,
-            lambda_args,
-            compare=True,
+        values = _apply_values(config, members)
+        check = await _render_check(
+            name, call.target, members, values, config, parent, lambda_args
        )
        return _apply_function(
            condition_id,
            cg.bool_,
            template_arg,
            lambda_args,
-            [f"return {parent}->{call.target.format(*exprs)};"],
+            [f"return {parent}->{check};"],
        )

    register_condition(name, ApplyCondition, schema)(builder)
@@ -646,54 +740,22 @@ XorCondition = cg.esphome_ns.class_("XorCondition", Condition)


@register_condition("and", AndCondition, validate_condition_list)
-async def and_condition_to_code(
-    config: ConfigType,
-    condition_id: ID,
-    template_arg: cg.TemplateArguments,
-    args: TemplateArgsType,
-) -> MockObj:
-    conditions = await build_condition_list(config, template_arg, args)
-    return cg.new_Pvariable(
-        condition_id, cg.TemplateArguments(len(conditions), *template_arg), conditions
-    )
-
-
-@register_condition("or", OrCondition, validate_condition_list)
-async def or_condition_to_code(
-    config: ConfigType,
-    condition_id: ID,
-    template_arg: cg.TemplateArguments,
-    args: TemplateArgsType,
-) -> MockObj:
-    conditions = await build_condition_list(config, template_arg, args)
-    return cg.new_Pvariable(
-        condition_id, cg.TemplateArguments(len(conditions), *template_arg), conditions
-    )
-
-
@register_condition("all", AndCondition, validate_condition_list)
-async def all_condition_to_code(
-    config: ConfigType,
-    condition_id: ID,
-    template_arg: cg.TemplateArguments,
-    args: TemplateArgsType,
-) -> MockObj:
-    conditions = await build_condition_list(config, template_arg, args)
-    return cg.new_Pvariable(
-        condition_id, cg.TemplateArguments(len(conditions), *template_arg), conditions
-    )
-
-
+@register_condition("or", OrCondition, validate_condition_list)
@register_condition("any", OrCondition, validate_condition_list)
-async def any_condition_to_code(
+@register_condition("xor", XorCondition, validate_condition_list)
+async def condition_group_to_code(
    config: ConfigType,
    condition_id: ID,
    template_arg: cg.TemplateArguments,
    args: TemplateArgsType,
 ) -> MockObj:
    conditions = await build_condition_list(config, template_arg, args)
+    # A group of one is that condition for and, or and xor; skip the wrapper.
+    if len(conditions) == 1:
+        return conditions[0]
    return cg.new_Pvariable(
-        condition_id, cg.TemplateArguments(len(conditions), *template_arg), conditions
+        condition_id, cg.TemplateArguments(len(conditions), *template_arg), *conditions
    )


@@ -708,19 +770,6 @@ async def not_condition_to_code(
    return cg.new_Pvariable(condition_id, template_arg, condition)


-@register_condition("xor", XorCondition, validate_condition_list)
-async def xor_condition_to_code(
-    config: ConfigType,
-    condition_id: ID,
-    template_arg: cg.TemplateArguments,
-    args: TemplateArgsType,
-) -> MockObj:
-    conditions = await build_condition_list(config, template_arg, args)
-    return cg.new_Pvariable(
-        condition_id, cg.TemplateArguments(len(conditions), *template_arg), conditions
-    )
-
-
@register_condition("lambda", LambdaCondition, cv.returning_lambda)
 async def lambda_condition_to_code(
    config: ConfigType,
@@ -822,11 +871,13 @@ async def if_action_to_code(
    condition = await build_condition(config[cond_conf], template_arg, args)
    var = cg.new_Pvariable(action_id, if_template_arg, condition)
    if CONF_THEN in config:
-        actions = await build_action_list(config[CONF_THEN], template_arg, args)
-        cg.add(var.add_then(actions))
+        for action in await build_action_list(config[CONF_THEN], template_arg, args):
+            cg.add(var.add_then_action(action))
+        cg.add(var.finish_then())
    if has_else:
-        actions = await build_action_list(config[CONF_ELSE], template_arg, args)
-        cg.add(var.add_else(actions))
+        for action in await build_action_list(config[CONF_ELSE], template_arg, args):
+            cg.add(var.add_else_action(action))
+        cg.add(var.finish_else())
    return var


@@ -849,11 +900,27 @@ async def while_action_to_code(
 ) -> MockObj:
    condition = await build_condition(config[CONF_CONDITION], template_arg, args)
    var = cg.new_Pvariable(action_id, template_arg, condition)
-    actions = await build_action_list(config[CONF_THEN], template_arg, args)
-    cg.add(var.add_then(actions))
+    for action in await build_action_list(config[CONF_THEN], template_arg, args):
+        cg.add(var.add_then_action(action))
+    cg.add(var.finish_then())
    return var


+def _shadow_iteration(args: TemplateArgsType) -> TemplateArgsType:
+    """Rename an inherited `iteration` so the inner repeat's own counter can shadow it."""
+    names = {name for _, name in args}
+    renamed: TemplateArgsType = []
+    for type_, name in args:
+        if name == "iteration":
+            depth = 1
+            while f"iteration_{depth}" in names:
+                depth += 1
+            name = f"iteration_{depth}"
+            names.add(name)
+        renamed.append((type_, name))
+    return renamed
+
+
@register_action(
    "repeat",
    RepeatAction,
@@ -877,9 +944,11 @@ async def repeat_action_to_code(
    actions = await build_action_list(
        config[CONF_THEN],
        cg.TemplateArguments(cg.uint32, *template_arg.args),
-        [(cg.uint32, "iteration"), *args],
+        [(cg.uint32, "iteration"), *_shadow_iteration(args)],
    )
-    cg.add(var.add_then(actions))
+    for action in actions:
+        cg.add(var.add_then_action(action))
+    cg.add(var.finish_then())
    return var


@@ -1015,30 +1084,141 @@ def has_non_synchronous_actions(actions: ConfigType) -> bool:
    Non-synchronous actions (delay, wait_until, script.wait, etc.) store
    trigger args for later execution, making non-owning types like StringRef
    unsafe.
+
+    Accepts an action list, a single action, or an automation. Only the keys of
+    action entries are looked up as action names; the options of an action are
+    only searched for nested action lists (``then:``, ``else:``, ...), so an
+    option that shares a name with an action, such as the ``delay:`` option of
+    ``speaker_source.set_playlist_delay``, is not mistaken for that action.
    """
    if isinstance(actions, list):
        return any(has_non_synchronous_actions(item) for item in actions)
    if isinstance(actions, dict):
-        for key in actions:
+        for key, options in actions.items():
            if key in ACTION_REGISTRY and not ACTION_REGISTRY[key].synchronous:
                return True
-        return any(
-            has_non_synchronous_actions(v)
-            for v in actions.values()
-            if isinstance(v, (list, dict))
-        )
+            if _options_have_non_synchronous_actions(options):
+                return True
    return False


+def _options_have_non_synchronous_actions(options: Any) -> bool:
+    """Search an action's options for nested action lists, without treating option keys as actions."""
+    if isinstance(options, list):
+        return has_non_synchronous_actions(options)
+    if isinstance(options, dict):
+        return any(_options_have_non_synchronous_actions(v) for v in options.values())
+    return False
+
+
+def validate_no_deferring_actions(
+    context: str, data: str = "the trigger data"
+) -> Callable[[ConfigType], ConfigType]:
+    """Return a validator that rejects deferring actions in a validated automation.
+
+    Use it for triggers whose arguments only live while the callback runs (views into a reused
+    buffer, a JSON document freed on return, ...): deferring actions keep the arguments for later.
+
+    :param context: Where the automation is, for the error message, e.g. ``"on_json and on_data"``.
+    :param data: What is only valid while the automation runs, for the error message.
+    """
+
+    def validator(value: ConfigType) -> ConfigType:
+        if has_non_synchronous_actions(value):
+            raise cv.Invalid(
+                f"Deferring actions (delay, wait_until, script.wait, ...) are not allowed in "
+                f"{context}: {data} is only valid while the automation runs. Copy what you need "
+                "into globals first, then defer in a separate script or automation."
+            )
+        return value
+
+    return validator
+
+
+def validate_synchronous_automation(
+    context: str,
+    data: str = "the trigger data",
+    extra_schema=None,
+    extra_validators=None,
+    single: bool = False,
+) -> cv.All:
+    """``validate_automation()`` that also rejects deferring actions.
+
+    See ``validate_no_deferring_actions()`` for ``context`` and ``data``; the other parameters are
+    passed to ``validate_automation()``.
+    """
+    return cv.All(
+        validate_automation(
+            extra_schema=extra_schema,
+            extra_validators=extra_validators,
+            single=single,
+        ),
+        validate_no_deferring_actions(context, data),
+    )
+
+
+async def _new_automation(
+    args: TemplateArgsType, config: ConfigType, *ctor_args: MockObj
+) -> MockObj:
+    """Create the Automation for ``config`` with its actions."""
+    templ = cg.TemplateArguments(*(arg[0] for arg in args))
+    obj = cg.new_Pvariable(config[CONF_AUTOMATION_ID], templ, *ctor_args)
+    actions = await build_action_list(config[CONF_THEN], templ, args)
+    for action in actions:
+        cg.add(obj.add_action(action))
+    return obj
+
+
 async def build_automation(
    trigger: MockObj, args: TemplateArgsType, config: ConfigType
 ) -> MockObj:
-    arg_types = [arg[0] for arg in args]
-    templ = cg.TemplateArguments(*arg_types)
-    obj = cg.new_Pvariable(config[CONF_AUTOMATION_ID], templ, trigger)
-    actions = await build_action_list(config[CONF_THEN], templ, args)
-    cg.add(obj.add_actions(actions))
-    return obj
+    return await _new_automation(args, config, trigger)
+
+
+async def build_trigger_callback(
+    args: TemplateArgsType,
+    config: ConfigType,
+    params: TemplateArgsType,
+    forward: Sequence[str | Expression] | None = None,
+    when: str | ApplyCall | None = None,
+    parent: MockObj | None = None,
+) -> LambdaExpression:
+    """Build the Automation for ``config`` and return a stateless callback that triggers it.
+
+    ``params`` are the parent callback's parameters, ``forward`` the expressions passed to
+    ``trigger()`` (default: the parameter names; write the parent as ``parent_ref(var)``),
+    ``when`` a filter the callback returns early on, skipped like any ``ApplyCall`` when none
+    of its keys is set. ``when`` may name ``parent`` as ``{parent}``, e.g.
+    ``"{parent}->is_fully_open()"``.
+    """
+    members: list[tuple[Any, Any, Any]] = []
+    if when is not None:
+        call = when if isinstance(when, ApplyCall) else ApplyCall(when)
+        members = call.members
+        if parent is None and call.names_parent:
+            raise ValueError(f"trigger filter {call.target!r} names {{parent}}")
+    obj = await _new_automation(args, config)
+    lambda_args = _apply_lambda_args(params)
+    statements: list[str] = []
+    if when is not None:
+        values = _apply_values(config, members)
+        if _apply_call_active(members, values):
+            check = await _render_check(
+                "trigger filter",
+                call.target,
+                members,
+                values,
+                config,
+                None if parent is None else str(parent_ref(parent)),
+                lambda_args,
+            )
+            statements.append(f"if (!({check}))\n  return;")
+    if forward is None:
+        forward = [name for _, name in params]
+    statements.append(f"{parent_ref(obj)}->trigger({', '.join(map(str, forward))});")
+    return LambdaExpression(
+        ["\n".join(statements)], lambda_args, capture="", return_type=cg.void
+    )


 async def build_callback_automation(
@@ -1047,6 +1227,9 @@ async def build_callback_automation(
    args: TemplateArgsType,
    config: ConfigType,
    forwarder: MockObj | MockObjClass | None = None,
+    params: TemplateArgsType | None = None,
+    forward: Sequence[str | Expression] | None = None,
+    when: str | ApplyCall | None = None,
 ) -> None:
    """Build an Automation and register it as a callback on the parent.

@@ -1058,6 +1241,9 @@ async def build_callback_automation(
    pointer-sized (single Automation* field) to fit inline in Callback::ctx_
    and avoid heap allocation.

+    With ``params``, ``forward`` or ``when`` the callback is instead the stateless
+    lambda of ``build_trigger_callback``; ``forwarder`` cannot be combined with them.
+
    :param parent: The component object (e.g., button, sensor).
    :param callback_method: Name of the callback method (e.g., "add_on_press_callback").
    :param args: Automation template args as list of (type, name) tuples.
@@ -1066,22 +1252,56 @@ async def build_callback_automation(
        TriggerForwarder<Ts...>. Pass any struct type whose aggregate init takes
        a single Automation pointer (e.g., TriggerOnTrueForwarder).
    """
-    arg_types = [arg[0] for arg in args]
-    templ = cg.TemplateArguments(*arg_types)
-    obj = cg.new_Pvariable(config[CONF_AUTOMATION_ID], templ)
-    actions = await build_action_list(config[CONF_THEN], templ, args)
-    cg.add(obj.add_actions(actions))
+    if params is not None or forward is not None or when is not None:
+        if forwarder is not None:
+            raise ValueError(
+                "forwarder cannot be combined with params, forward or when"
+            )
+        callback = await build_trigger_callback(
+            args, config, args if params is None else params, forward, when, parent
+        )
+        cg.add(getattr(parent, callback_method)(callback))
+        return
+    obj = await _new_automation(args, config)
    # Use template forwarder structs for deduplication. The compiler generates
    # one operator() per forwarder type; different automation pointers are just
    # data in the struct.
    if forwarder is None:
-        forwarder = TriggerForwarder.template(templ)
+        forwarder = TriggerForwarder.template(*(arg[0] for arg in args))
    # RawExpression for aggregate init — both forwarder and obj are codegen
    # MockObjs (not user input), and there's no Expression type for positional
    # aggregate initialization (StructInitializer uses named fields).
    cg.add(getattr(parent, callback_method)(cg.RawExpression(f"{forwarder}{{{obj}}}")))


+async def build_parent_callback_automation(
+    parent: MockObj, callback_method: str, arg: tuple[Any, str], config: ConfigType
+) -> None:
+    """Register an Automation that receives ``parent`` from a callback that carries nothing.
+
+    ``arg`` is the automation's ``(type, name)``, e.g. ``(Fan.operator("ptr"), "x")``.
+    """
+    await build_callback_automation(
+        parent, callback_method, [arg], config, params=[], forward=[parent_ref(parent)]
+    )
+
+
+async def build_trigger_automations(
+    parent: MockObj | None,
+    config: ConfigType,
+    entries: tuple[tuple[str, TemplateArgsType], ...],
+) -> None:
+    """Instantiate each entry's Trigger class, with ``parent`` when given, and build its automations.
+
+    ``entries`` are ``(conf_key, args)`` pairs; the class comes from the entry's ``CONF_TRIGGER_ID``.
+    """
+    ctor_args = () if parent is None else (parent,)
+    for conf_key, args in entries:
+        for conf in config.get(conf_key, []):
+            trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], *ctor_args)
+            await build_automation(trigger, args, conf)
+
+
@dataclass(frozen=True, slots=True)
 class CallbackAutomation:
    """A single callback automation entry for build_callback_automations."""
@@ -1090,6 +1310,9 @@ class CallbackAutomation:
    callback_method: str
    args: TemplateArgsType = field(default_factory=list)
    forwarder: MockObj | MockObjClass | None = None
+    params: TemplateArgsType | None = None
+    forward: Sequence[str | Expression] | None = None
+    when: str | ApplyCall | None = None


 async def build_callback_automations(
@@ -1111,4 +1334,7 @@ async def build_callback_automations(
                entry.args,
                conf,
                forwarder=entry.forwarder,
+                params=entry.params,
+                forward=entry.forward,
+                when=entry.when,
            )
@@ -54,6 +54,7 @@ from esphome.components.esp8266.const import (
    KEY_ESP8266,
    KEY_FLASH_SIZE,
    KEY_SCANF_FLOAT,
+    THROW_STUBS_HEADER,
 )
 from esphome.core import CORE, EsphomeError
 from esphome.framework_helpers import get_project_cxx_compile_flags
@@ -1056,7 +1057,7 @@ def write_project(paths: InstalledPaths, ccache: str | None) -> bool:
    cxx = (toolchain_tool(paths.toolchain, "g++"),)
    lines = [
        *tool_lines((toolchain_tool(paths.toolchain, "gcc"),), cxx, ccache),
-        *compile_rule_lines(),
+        *compile_rule_lines(ccache),
        *ar_rule_lines(toolchain_tool(paths.toolchain, "ar")),
        *pch_rule_lines(),
        "rule link",
@@ -1087,32 +1088,8 @@ def write_project(paths: InstalledPaths, ccache: str | None) -> bool:
    if "USE_ESP8266_WAVEFORM_STUBS" in flag_defines:
        core_exclude |= _CORE_EXCLUDE_WAVEFORM

-    archives = []
-    # variant_dir existence was already enforced with the include dirs
-    variant_sources = collect_sources(variant_dir)
-    if variant_sources:
-        objs = compile_edges(lines, variant_sources, variant_dir, "variant")
-        lines.append(f"build libFrameworkArduinoVariant.a: ar {' '.join(objs)}")
-        archives.append("libFrameworkArduinoVariant.a")
-
-    core_objs = compile_edges(
-        lines, collect_sources(core_dir, core_exclude), core_dir, "core"
-    )
-    if not core_objs:
-        # An empty archive would link into a wall of undefined references
-        # (app_entry, the exception vectors) far from the cause
-        raise EsphomeError(
-            f"{_INCOMPLETE_INSTALL}: no core sources in {core_dir}; {_CLEAN_HINT}"
-        )
-    lines.append(f"build libFrameworkArduino.a: ar {' '.join(core_objs)}")
-    archives.append("libFrameworkArduino.a")
-
-    lib_archives, direct_objs = library_edges(lines, libraries)
-    archives += lib_archives
-
-    # One source of truth with the PlatformIO path: esp8266/__init__ pins
-    # build_src_flags (the throw_stubs force-include); -include paths
-    # resolve against the source root
+    # esp8266/__init__ pins build_src_flags (the throw_stubs force-include), as on
+    # the PlatformIO path; -include paths resolve against the source root
    src_other: list[str] = []
    src_includes: list[str] = []
    src_it = iter(
@@ -1131,7 +1108,45 @@ def write_project(paths: InstalledPaths, ccache: str | None) -> bool:
            src_includes.append(tok[len("-include") :])
        else:
            src_other.append(_shell_token(tok))
+    # The throw stubs abort: none anywhere with exceptions on, else the core and
+    # libraries get them too (src keeps them after its pch include)
+    if config.exceptions:
+        src_includes = [h for h in src_includes if h != THROW_STUBS_HEADER]
    include_flags = [f"-include {_q(src_dir / h)}" for h in src_includes]
+    framework_flags = ""
+    if THROW_STUBS_HEADER in src_includes:
+        stubs_flag = include_flags[src_includes.index(THROW_STUBS_HEADER)]
+        lines.append(f"frameworkflags = {stubs_flag}")
+        framework_flags = "$frameworkflags"
+    archives = []
+    # variant_dir existence was already enforced with the include dirs
+    variant_sources = collect_sources(variant_dir)
+    if variant_sources:
+        objs = compile_edges(
+            lines, variant_sources, variant_dir, "variant", flags=framework_flags
+        )
+        lines.append(f"build libFrameworkArduinoVariant.a: ar {' '.join(objs)}")
+        archives.append("libFrameworkArduinoVariant.a")
+
+    core_objs = compile_edges(
+        lines,
+        collect_sources(core_dir, core_exclude),
+        core_dir,
+        "core",
+        flags=framework_flags,
+    )
+    if not core_objs:
+        # An empty archive would link into a wall of undefined references
+        # (app_entry, the exception vectors) far from the cause
+        raise EsphomeError(
+            f"{_INCOMPLETE_INSTALL}: no core sources in {core_dir}; {_CLEAN_HINT}"
+        )
+    lines.append(f"build libFrameworkArduino.a: ar {' '.join(core_objs)}")
+    archives.append("libFrameworkArduino.a")
+
+    lib_archives, direct_objs = library_edges(lines, libraries, framework_flags)
+    archives += lib_archives
+
    # One shared variable instead of repeating the flags line on every src
    # edge (hundreds of edges in a real project)
    lines.append(f"srcflags = {' '.join(src_other + include_flags)}")
@@ -160,7 +160,7 @@ def _cmake_quote(value: str) -> str:

 # CONFIG_APP_BUILD_BOOTLOADER is hidden and force-selected, so it can only be
 # cleared at the CMake level (the same state IDF's RAM-app build type uses).
-# The macro is IDF's __build_process_project_includes plus two added lines;
+# The macro is IDF's __build_process_project_includes plus a few added lines;
 # the flag is ignored and the bootloader builds as usual if IDF changes it.
 IDF_BOOTLOADER_OVERRIDE = """\
 # ESPHome bootloader skip switch; see esphome/espidf/toolchain.py.
@@ -173,6 +173,9 @@ if(ESPHOME_SKIP_BOOTLOADER)
        # skipped) bootloader project_include leaks; keep it defined, or
        # its empty TARGET_SRC_NAME sends file(GLOB_RECURSE) across /.
        idf_build_get_property(idf_target IDF_TARGET)
+        # partition_table's V1 ECDSA signing reads this key, which the
+        # skipped bootloader project_include also sets.
+        get_filename_component(SECURE_BOOT_SIGNING_KEY "${CONFIG_SECURE_BOOT_SIGNING_KEY}" ABSOLUTE BASE_DIR "${project_dir}")
        idf_build_get_property(build_properties __BUILD_PROPERTIES)
        foreach(build_property ${build_properties})
            idf_build_get_property(val ${build_property})
@@ -198,6 +201,10 @@ endif()
 BOOTLOADER_OVERRIDE_ADDED_LINES = (
    'set(CONFIG_APP_BUILD_BOOTLOADER "")',
    "idf_build_get_property(idf_target IDF_TARGET)",
+    (
+        "get_filename_component(SECURE_BOOT_SIGNING_KEY"
+        ' "${CONFIG_SECURE_BOOT_SIGNING_KEY}" ABSOLUTE BASE_DIR "${project_dir}")'
+    ),
 )

 _MACRO = re.compile(
@@ -230,6 +237,35 @@ def idf_macro_matches(idf_path: Path) -> bool:
    return live == _EXPECTED_MACRO


+def _cmake_args_for_write(minimal: bool) -> dict[str, str]:
+    """The cg.add_cmake_arg() values for one project write.
+
+    The discovery (minimal) write lets every built-in component register so
+    the list it finds, cached per target, serves any exclusion set; the full
+    write drops the excluded names from that list and passes all of them to
+    IDF. Names outside the framework's components directory (managed
+    components) stay excluded on the discovery write too, since the list
+    only holds built-in ones. A checkout supplied through IDF_PATH caches
+    nothing, so its discovery keeps every exclusion.
+    """
+    from esphome.espidf.toolchain import _esphome_manages_idf, _get_idf_path
+
+    args = dict(CORE.cmake_args)
+    if (
+        not minimal
+        or not _esphome_manages_idf()
+        or not (excluded := args.get("EXCLUDE_COMPONENTS"))
+    ):
+        return args
+    root = _get_idf_path() / "components"
+    outside = [name for name in excluded.split(";") if not (root / name).is_dir()]
+    if outside:
+        args["EXCLUDE_COMPONENTS"] = ";".join(outside)
+    else:
+        del args["EXCLUDE_COMPONENTS"]
+    return args
+
+
 def get_project_cmakelists(
    minimal: bool = False, builtin_components: list[str] | None = None
 ) -> str:
@@ -293,11 +329,10 @@ def get_project_cmakelists(

    # CMake variables registered via cg.add_cmake_arg(). Emitted before
    # include(project.cmake) so values like EXCLUDE_COMPONENTS are already
-    # set when project.cmake seeds the component list, and on minimal
-    # (discovery) writes too so excluded components never register.
+    # set when project.cmake seeds the component list.
    cmake_args = "\n".join(
        f"set({name} {_cmake_quote(value)})"
-        for name, value in sorted(CORE.cmake_args.items())
+        for name, value in sorted(_cmake_args_for_write(minimal).items())
    )

    # Per-project list exposed as a CMake variable so converted PIO libs
@@ -320,10 +355,10 @@ def get_project_cmakelists(
    # component's REQUIRES including real IDF components). Referenced by
    # src/CMakeLists and by each converted PIO lib's CMakeLists. Skipped
    # on minimal writes because project_description.json may be stale.
-    # Excluded components are dropped here as well: a stale
-    # project_description.json from a build without exclusions may still
-    # list them, and requiring an excluded component pulls it back into
-    # the build (IDF requirement expansion overrides EXCLUDE_COMPONENTS).
+    # Excluded components are dropped here as well: the discovery list
+    # (cached per target) still holds them, and requiring an excluded
+    # component pulls it back into the build (IDF requirement expansion
+    # overrides EXCLUDE_COMPONENTS).
    # Derived from the EXCLUDE_COMPONENTS cmake arg emitted above so the
    # two can never disagree within one generated file.
    builtin_components_property = (
@@ -390,15 +425,24 @@ project({CORE.name})
 # Emit per-memory-type JSON size data for ESPHome to read post-build.
 # json2 stays small; raw dumps every symbol (~2s on a large map) and
 # this command runs inside the link edge, blocking everything downstream.
-# The map is a BYPRODUCT so ninja knows the link writes it; IDF's size
-# target depends on the map and can then be built in the same run as all.
-# IDF's cmakev2 declares the map itself, so drop this line on that switch.
+# IDF's size target depends on the map, so ninja has to know the link
+# writes it for size to build in the same run as all. IDF declares the
+# map itself since espressif/esp-idf#19201 (and in cmakev2), and ninja
+# rejects two rules for one output, so declare it here only when IDF has
+# not. add_custom_command(OUTPUT) marks its outputs GENERATED.
+get_source_file_property(esphome_map_declared
+    ${{CMAKE_BINARY_DIR}}/${{CMAKE_PROJECT_NAME}}.map GENERATED)
+if(esphome_map_declared)
+    set(esphome_map_byproducts)
+else()
+    set(esphome_map_byproducts BYPRODUCTS ${{CMAKE_BINARY_DIR}}/${{CMAKE_PROJECT_NAME}}.map)
+endif()
 add_custom_command(
    TARGET ${{CMAKE_PROJECT_NAME}}.elf POST_BUILD
    COMMAND ${{PYTHON}} -m esp_idf_size {size_ng_flag} --format=json2
            -o ${{CMAKE_BINARY_DIR}}/esp_idf_size.json
            ${{CMAKE_PROJECT_NAME}}.map
-    BYPRODUCTS ${{CMAKE_BINARY_DIR}}/${{CMAKE_PROJECT_NAME}}.map
+    ${{esphome_map_byproducts}}
    WORKING_DIRECTORY ${{CMAKE_BINARY_DIR}}
    VERBATIM
 )
@@ -547,10 +591,9 @@ def write_project(
    )

    # Snapshot the exclusion set so has_outdated_files() can trigger a
-    # discovery reconfigure when it changes. Excluded components never
-    # register in project_description.json, so re-including one (e.g. a
-    # config gains mqtt) requires a fresh discovery pass before the
-    # ESPHOME_PROJECT_BUILTIN_COMPONENTS property can list it.
+    # reconfigure when it changes. The ESPHOME_PROJECT_BUILTIN_COMPONENTS
+    # property drops excluded names, so re-including one (e.g. a config
+    # gains mqtt) needs a reconfigure to rebuild it from the discovery list.
    write_file_if_changed(
        CORE.relative_build_path("exclude_components.esphomeinternal"),
        ";".join(get_excluded_builtin_components()),
@@ -240,7 +240,7 @@ def write_project(compilers: HostCompilers, ccache: str | None) -> bool:

    lines = [
        *tool_lines(compilers.cc, compilers.cxx, ccache),
-        *compile_rule_lines(),
+        *compile_rule_lines(ccache),
        *pch_rule_lines(),
        "rule link",
        "  command = $cxx -o $out $linkflags @$out.rsp $archives $libdirflags $libflags",
@@ -74,33 +74,40 @@ def tool_lines(
        # path gets
        f"python = {_q(strip_win_long_path_prefix(sys.executable))}",
        f"buildtool = {_q(_BUILD_TOOL)}",
-        f"ccache = {_q(ccache) if ccache else ''}",
+        *([f"ccache = {_q(ccache)}"] if ccache else []),
        "",
    ]


-def compile_rule_lines() -> list[str]:
-    """The compile rules; ``$own_includes`` is empty unless an edge sets it."""
+def compile_rule_lines(ccache: str | None) -> list[str]:
+    """The compile rules; ``$own_includes`` is empty unless an edge sets it.
+
+    ``ccache`` is the launcher ``tool_lines`` was given; the same test here
+    keeps the variable and the rules in step. It is spliced in rather than
+    left as an empty variable: a leading space on the command line makes
+    CreateProcess fail on Windows.
+    """
+    launcher = "$ccache " if ccache else ""
    return [
        "rule c",
-        "  command = $ccache $cc -MMD -MF $out.d $own_includes $cflags $flags -c $in -o $out",
+        f"  command = {launcher}$cc -MMD -MF $out.d $own_includes $cflags $flags -c $in -o $out",
        "  depfile = $out.d",
        "  deps = gcc",
        "  description = CC $out",
        "rule cxx",
-        "  command = $ccache $cxx -MMD -MF $out.d $own_includes $cxxflags $flags -c $in -o $out",
+        f"  command = {launcher}$cxx -MMD -MF $out.d $own_includes $cxxflags $flags -c $in -o $out",
        "  depfile = $out.d",
        "  deps = gcc",
        "  description = CXX $out",
        "rule aspp",
-        "  command = $ccache $cc -MMD -MF $out.d -x assembler-with-cpp $own_includes $asflags $flags -c $in -o $out",
+        f"  command = {launcher}$cc -MMD -MF $out.d -x assembler-with-cpp $own_includes $asflags $flags -c $in -o $out",
        "  depfile = $out.d",
        "  deps = gcc",
        "  description = AS $out",
        # Plain assembler, as SCons's ASCOM: no preprocessor, so no
        # depfile and no $flags (defines/includes) either
        "rule asm",
-        "  command = $ccache $cc -x assembler $asflags -c $in -o $out",
+        f"  command = {launcher}$cc -x assembler $asflags -c $in -o $out",
        "  description = AS $out",
    ]

@@ -207,10 +214,12 @@ def compile_edges(


 def library_edges(
-    lines: list[str], libraries: list[ArduinoLibrary]
+    lines: list[str], libraries: list[ArduinoLibrary], extra_flags: str = ""
 ) -> tuple[list[str], list[str]]:
    """Emit every library's compile and archive edges.

+    ``extra_flags`` (raw ninja text) precede each library's own flags.
+
    Returns the archive names and the objects that link directly. A
    library's own include dirs lead its compile lines, as PlatformIO searched
    them first: the include path is one global list, so another library's
@@ -232,7 +241,7 @@ def library_edges(
            lib.sources,
            common_parent(lib.sources),
            f"lib/{lib.name}",
-            flags=" ".join(_shell_token(f) for f in lib.flags),
+            flags=" ".join(filter(None, [extra_flags, *map(_shell_token, lib.flags)])),
            own_includes=" ".join(f"-I{_q(d)}" for d in lib.include_dirs),
        )
        if not lib.lib_archive:
@@ -102,25 +102,21 @@ _KNOWN_FILE_EXTENSIONS = frozenset(
 )


-# Matches !secret references in YAML text.  An optional surrounding
-# quote pair around the key is allowed and ignored: YAML treats
-# ``!secret 'foo'`` and ``!secret foo`` as the same key.  This is
-# intentionally a simple regex scan rather than a YAML parse — it may
-# match inside comments or multi-line strings, which is the conservative
-# direction (include more secrets rather than fewer).
-_SECRET_RE = re.compile(r"""!secret\s+['"]?([^\s'"]+)""")
-
-
 def _find_used_secret_keys(yaml_files: list[Path]) -> set[str]:
    """Scan YAML files for ``!secret <key>`` references."""
    keys: set[str] = set()
    for fpath in yaml_files:
        try:
            text = fpath.read_text(encoding="utf-8")
-        except (OSError, UnicodeDecodeError):
+        except (OSError, UnicodeDecodeError) as err:
+            _LOGGER.warning(
+                "Could not scan %s for !secret references (%s); the bundled "
+                "secret set may be incomplete",
+                fpath,
+                err,
+            )
            continue
-        for match in _SECRET_RE.finditer(text):
-            keys.add(match.group(1))
+        keys |= yaml_util.find_secret_references(text)
    return keys


@@ -422,6 +418,18 @@ class ConfigBundleCreator:
        must ship every candidate so the remote build can pick any one.
        """
        discovered = yaml_util.discover_user_yaml_files(self._config_path)
+        if discovered.load_errors:
+            _LOGGER.warning(
+                "Bundle may be incomplete; could not load all configuration files: %s",
+                "; ".join(discovered.load_errors),
+            )
+        if discovered.unresolved:
+            _LOGGER.warning(
+                "Bundle may be incomplete; %d !include path(s) use "
+                "substitutions and cannot be captured: %s",
+                len(discovered.unresolved),
+                ", ".join(discovered.unresolved),
+            )
        self._secrets_paths.update(discovered.secrets)
        # A !secret inside a file this re-parse does not reach (for example
        # a git-fetched package the builder re-fetches) still resolves
@@ -31,15 +31,20 @@ from esphome.cpp_generator import (  # noqa: F401
    add_global,
    add_library,
    add_platformio_option,
+    extern_progmem_array,
    get_variable,
    get_variable_with_full_id,
+    is_static_pointer,
    is_template,
    new_Pvariable,
    new_variable,
    process_lambda,
    progmem_array,
+    progmem_string,
    safe_exp,
    set_cpp_standard,
+    shared_progmem_array,
+    shared_progmem_string,
    statement,
    static_const_array,
    static_function,
@@ -1 +1,2 @@
 CODEOWNERS = ["@MrSuicideParrot"]
+DOMAIN = "a01nyub"
@@ -6,7 +6,7 @@

 namespace esphome::a01nyub {

-static const char *const TAG = "a01nyub.sensor";
+ESPHOME_LOG_TAG(TAG, "a01nyub.sensor");

 void A01nyubComponent::loop() {
  uint8_t data;
@@ -1 +1,2 @@
 CODEOWNERS = ["@TH-Braemer"]
+DOMAIN = "a02yyuw"
@@ -6,7 +6,7 @@

 namespace esphome::a02yyuw {

-static const char *const TAG = "a02yyuw.sensor";
+ESPHOME_LOG_TAG(TAG, "a02yyuw.sensor");

 void A02yyuwComponent::loop() {
  uint8_t data;
@@ -0,0 +1 @@
+DOMAIN = "a4988"
@@ -3,7 +3,7 @@

 namespace esphome::a4988 {

-static const char *const TAG = "a4988.stepper";
+ESPHOME_LOG_TAG(TAG, "a4988.stepper");

 void A4988::setup() {
  if (this->sleep_pin_ != nullptr) {
@@ -1 +1,2 @@
 CODEOWNERS = ["@DAVe3283"]
+DOMAIN = "absolute_humidity"
@@ -3,7 +3,7 @@

 namespace esphome::absolute_humidity {

-static const char *const TAG{"absolute_humidity.sensor"};
+ESPHOME_LOG_TAG(TAG, "absolute_humidity.sensor");

 void AbsoluteHumidityComponent::setup() {
  this->temperature_sensor_->add_on_state_callback([this](float state) {
@@ -0,0 +1 @@
+DOMAIN = "ac_dimmer"
@@ -14,7 +14,7 @@

 namespace esphome::ac_dimmer {

-static const char *const TAG = "ac_dimmer";
+ESPHOME_LOG_TAG(TAG, "ac_dimmer");

 // Global array to store dimmer objects
 static AcDimmerDataStore *all_dimmers[32];  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
@@ -9,7 +9,7 @@
 #include "esp_clk_tree.h"
 #include "soc/clk_tree_defs.h"

-static const char *const TAG = "hw_timer_esp_idf";
+ESPHOME_LOG_TAG(TAG, "hw_timer_esp_idf");

 namespace esphome::ac_dimmer {

@@ -9,6 +9,7 @@ from esphome.cpp_generator import MockObj
 from esphome.types import ConfigType

 DEPENDENCIES = ["uart"]
+DOMAIN = "adalight"

 adalight_ns = cg.esphome_ns.namespace("adalight")
 AdalightLightEffect = adalight_ns.class_(
@@ -3,7 +3,7 @@

 namespace esphome::adalight {

-static const char *const TAG = "adalight_light_effect";
+ESPHOME_LOG_TAG(TAG, "adalight_light_effect");

 static const uint32_t ADALIGHT_ACK_INTERVAL = 1000;
 static const uint32_t ADALIGHT_RECEIVE_TIMEOUT = 1000;
@@ -22,6 +22,7 @@ from esphome.core import CORE
 from esphome.types import ConfigType

 CODEOWNERS = ["@esphome/core"]
+DOMAIN = "adc"

 adc_ns = cg.esphome_ns.namespace("adc")

@@ -128,10 +128,10 @@ class ADCSensor final : public sensor::Sensor, public PollingComponent, public v
 #endif  // USE_RP2

 protected:
-  uint8_t sample_count_{1};
-  bool output_raw_{false};
+  uint8_t sample_count_{1};  // Must match DEFAULT_SAMPLES in sensor.py
+  bool output_raw_{false};   // Must match CONF_RAW default in sensor.py
  InternalGPIOPin *pin_;
-  SamplingMode sampling_mode_{SamplingMode::AVG};
+  SamplingMode sampling_mode_{SamplingMode::AVG};  // Must match DEFAULT_SAMPLING_MODE in sensor.py

 #ifdef USE_ESP32
  float sample_autorange_();
@@ -139,7 +139,7 @@ class ADCSensor final : public sensor::Sensor, public PollingComponent, public v
  bool autorange_{false};
  adc_oneshot_unit_handle_t adc_handle_{nullptr};
  adc_cali_handle_t calibration_handle_{nullptr};
-  adc_atten_t attenuation_{ADC_ATTEN_DB_0};
+  adc_atten_t attenuation_{ADC_ATTEN_DB_0};  // Must match DEFAULT_ATTENUATION in sensor.py
  adc_channel_t channel_{};
  adc_unit_t adc_unit_{};
  struct SetupFlags {
@@ -3,7 +3,7 @@

 namespace esphome::adc {

-static const char *const TAG = "adc";
+ESPHOME_LOG_TAG(TAG, "adc");

 const LogString *sampling_mode_to_str(SamplingMode mode) {
  switch (mode) {
@@ -6,7 +6,7 @@

 namespace esphome::adc {

-static const char *const TAG = "adc";
+ESPHOME_LOG_TAG(TAG, "adc");

 adc_oneshot_unit_handle_t ADCSensor::shared_adc_handles[2] = {nullptr, nullptr};

@@ -13,7 +13,7 @@ ADC_MODE(ADC_VCC)

 namespace esphome::adc {

-static const char *const TAG = "adc";
+ESPHOME_LOG_TAG(TAG, "adc");

 void ADCSensor::setup() {
 #ifndef USE_ADC_SENSOR_VCC
@@ -5,7 +5,7 @@

 namespace esphome::adc {

-static const char *const TAG = "adc";
+ESPHOME_LOG_TAG(TAG, "adc");

 void ADCSensor::setup() {
 #ifndef USE_ADC_SENSOR_VCC
@@ -17,7 +17,7 @@

 namespace esphome::adc {

-static const char *const TAG = "adc";
+ESPHOME_LOG_TAG(TAG, "adc");

 // The on-die temperature sensor sits on the last ADC channel: input 4 on RP2040
 // and RP2350A, but input 8 on RP2350B, which has eight external channels rather
@@ -7,7 +7,7 @@

 namespace esphome::adc {

-static const char *const TAG = "adc";
+ESPHOME_LOG_TAG(TAG, "adc");

 void ADCSensor::setup() {
  if (!adc_is_ready_dt(this->channel_)) {
@@ -48,6 +48,11 @@ AUTO_LOAD = ["voltage_sampler"]
 CONF_SAMPLES = "samples"
 CONF_SAMPLING_MODE = "sampling_mode"

+# Keep in sync with the initializers in adc_sensor.h
+DEFAULT_ATTENUATION = "0db"
+DEFAULT_SAMPLING_MODE = "avg"
+DEFAULT_SAMPLES = 1
+

 _attenuation = cv.enum(ATTENUATION_MODES, lower=True)
 _sampling_mode = cv.enum(SAMPLING_MODES, lower=True)
@@ -65,7 +70,10 @@ def validate_config(config: ConfigType) -> ConfigType:
    ):
        raise cv.Invalid("ESP32-S31 only supports 'attenuation: 0db'")

-    if config.get(CONF_ATTENUATION, None) == "auto" and config.get(CONF_SAMPLES, 1) > 1:
+    if (
+        config.get(CONF_ATTENUATION, None) == "auto"
+        and config.get(CONF_SAMPLES, DEFAULT_SAMPLES) > 1
+    ):
        raise cv.Invalid(
            "Automatic attenuation cannot be used when multisampling is set"
        )
@@ -113,12 +121,16 @@ CONFIG_SCHEMA = cv.All(
        {
            cv.Required(CONF_PIN): validate_adc_pin,
            cv.Optional(CONF_RAW, default=False): cv.boolean,
-            cv.SplitDefault(CONF_ATTENUATION, esp32="0db"): cv.All(
+            cv.SplitDefault(CONF_ATTENUATION, esp32=DEFAULT_ATTENUATION): cv.All(
                cv.only_on_esp32, _attenuation
            ),
            cv.OnlyWith(CONF_NRF_SAADC, PLATFORM_NRF52): cv.declare_id(adc_dt_spec),
-            cv.Optional(CONF_SAMPLES, default=1): cv.int_range(min=1, max=255),
-            cv.Optional(CONF_SAMPLING_MODE, default="avg"): _sampling_mode,
+            cv.Optional(CONF_SAMPLES, default=DEFAULT_SAMPLES): cv.int_range(
+                min=1, max=255
+            ),
+            cv.Optional(
+                CONF_SAMPLING_MODE, default=DEFAULT_SAMPLING_MODE
+            ): _sampling_mode,
        }
    )
    .extend(cv.polling_component_schema("60s")),
@@ -155,9 +167,13 @@ async def to_code(config: ConfigType) -> None:
        pin = await cg.gpio_pin_expression(config[CONF_PIN])
        cg.add(var.set_pin(pin))

-    cg.add(var.set_output_raw(config[CONF_RAW]))
-    cg.add(var.set_sample_count(config[CONF_SAMPLES]))
-    cg.add(var.set_sampling_mode(config[CONF_SAMPLING_MODE]))
+    # Skip the setters when the config matches the C++ initializers.
+    if config[CONF_RAW]:
+        cg.add(var.set_output_raw(True))
+    if (samples := config[CONF_SAMPLES]) != DEFAULT_SAMPLES:
+        cg.add(var.set_sample_count(samples))
+    if (sampling_mode := config[CONF_SAMPLING_MODE]) != DEFAULT_SAMPLING_MODE:
+        cg.add(var.set_sampling_mode(sampling_mode))

    if CORE.is_esp32:
        # Re-enable ESP-IDF's ADC driver (excluded by default to save compile time)
@@ -166,7 +182,7 @@ async def to_code(config: ConfigType) -> None:
        if attenuation := config.get(CONF_ATTENUATION):
            if attenuation == "auto":
                cg.add(var.set_autorange(cg.global_ns.true))
-            else:
+            elif attenuation != DEFAULT_ATTENUATION:
                cg.add(var.set_attenuation(attenuation))

        variant = get_esp32_variant()
@@ -5,6 +5,7 @@ from esphome.const import CONF_ID
 from esphome.types import ConfigType

 DEPENDENCIES = ["spi"]
+DOMAIN = "adc128s102"
 MULTI_CONF = True
 CODEOWNERS = ["@DeerMaximum"]

@@ -3,7 +3,7 @@

 namespace esphome::adc128s102 {

-static const char *const TAG = "adc128s102";
+ESPHOME_LOG_TAG(TAG, "adc128s102");

 float ADC128S102::get_setup_priority() const { return setup_priority::HARDWARE; }

@@ -4,7 +4,7 @@

 namespace esphome::adc128s102 {

-static const char *const TAG = "adc128s102.sensor";
+ESPHOME_LOG_TAG(TAG, "adc128s102.sensor");

 ADC128S102Sensor::ADC128S102Sensor(uint8_t channel) : channel_(channel) {}

@@ -0,0 +1 @@
+DOMAIN = "addressable_light"
@@ -3,7 +3,7 @@

 namespace esphome::addressable_light {

-static const char *const TAG = "addressable_light.display";
+ESPHOME_LOG_TAG(TAG, "addressable_light.display");

 int AddressableLightDisplay::get_width_internal() { return this->width_; }
 int AddressableLightDisplay::get_height_internal() { return this->height_; }
@@ -0,0 +1 @@
+DOMAIN = "ade7880"
@@ -15,7 +15,7 @@

 namespace esphome::ade7880 {

-static const char *const TAG = "ade7880";
+ESPHOME_LOG_TAG(TAG, "ade7880");

 void IRAM_ATTR ADE7880Store::gpio_intr(ADE7880Store *arg) { arg->reset_done = true; }

@@ -1 +1,2 @@
 CODEOWNERS = ["@angelnu"]
+DOMAIN = "ade7953"
@@ -27,6 +27,7 @@ from esphome.cpp_generator import MockObj
 from esphome.types import ConfigType

 CODEOWNERS = ["@angelnu"]
+DOMAIN = "ade7953_base"

 CONF_CURRENT_A = "current_a"
 CONF_CURRENT_B = "current_b"
@@ -5,7 +5,7 @@

 namespace esphome::ade7953_base {

-static const char *const TAG = "ade7953";
+ESPHOME_LOG_TAG(TAG, "ade7953");

 constexpr uint16_t CONFIG_DEFAULT = 0x8004u;
 constexpr uint16_t CONFIG_LOCK_BIT = 0x8000u;
@@ -1 +1,2 @@
 CODEOWNERS = ["@angelnu"]
+DOMAIN = "ade7953_i2c"
@@ -4,7 +4,7 @@

 namespace esphome::ade7953_i2c {

-static const char *const TAG = "ade7953";
+ESPHOME_LOG_TAG(TAG, "ade7953");

 void AdE7953I2c::dump_config() {
  ESP_LOGCONFIG(TAG, "ADE7953_i2c:");
@@ -1 +1,2 @@
 CODEOWNERS = ["@angelnu"]
+DOMAIN = "ade7953_spi"
@@ -4,7 +4,7 @@

 namespace esphome::ade7953_spi {

-static const char *const TAG = "ade7953";
+ESPHOME_LOG_TAG(TAG, "ade7953");

 // Datasheet requires at least 1.2µs after clearing CONFIG LOCK_BIT before raising CS
 constexpr uint8_t CONFIG_LOCK_SETTLE_US = 2;
@@ -5,6 +5,7 @@ from esphome.const import CONF_ID
 from esphome.types import ConfigType

 DEPENDENCIES = ["i2c"]
+DOMAIN = "ads1115"
 MULTI_CONF = True

 ads1115_ns = cg.esphome_ns.namespace("ads1115")
@@ -4,7 +4,7 @@

 namespace esphome::ads1115 {

-static const char *const TAG = "ads1115";
+ESPHOME_LOG_TAG(TAG, "ads1115");
 static const uint8_t ADS1115_REGISTER_CONVERSION = 0x00;
 static const uint8_t ADS1115_REGISTER_CONFIG = 0x01;

@@ -4,7 +4,7 @@

 namespace esphome::ads1115 {

-static const char *const TAG = "ads1115.sensor";
+ESPHOME_LOG_TAG(TAG, "ads1115.sensor");

 float ADS1115Sensor::sample() {
  return this->parent_->request_measurement(this->multiplexer_, this->gain_, this->resolution_, this->samplerate_);
@@ -6,6 +6,7 @@ from esphome.types import ConfigType

 CODEOWNERS = ["@solomondg1"]
 DEPENDENCIES = ["spi"]
+DOMAIN = "ads1118"
 MULTI_CONF = True

 CONF_ADS1118_ID = "ads1118_id"
@@ -4,7 +4,7 @@

 namespace esphome::ads1118 {

-static const char *const TAG = "ads1118";
+ESPHOME_LOG_TAG(TAG, "ads1118");
 static const uint8_t ADS1118_DATA_RATE_860_SPS = 0b111;

 void ADS1118::setup() {
@@ -4,7 +4,7 @@

 namespace esphome::ads1118 {

-static const char *const TAG = "ads1118.sensor";
+ESPHOME_LOG_TAG(TAG, "ads1118.sensor");

 void ADS1118Sensor::dump_config() {
  LOG_SENSOR("  ", "ADS1118 Sensor", this);
@@ -1 +1,2 @@
 CODEOWNERS = ["@mak-42"]
+DOMAIN = "ags10"
@@ -4,7 +4,7 @@
 #include <cinttypes>

 namespace esphome::ags10 {
-static const char *const TAG = "ags10";
+ESPHOME_LOG_TAG(TAG, "ags10");

 // Data acquisition.
 static const uint8_t REG_TVOC = 0x00;
@@ -0,0 +1 @@
+DOMAIN = "aht10"
@@ -19,7 +19,7 @@

 namespace esphome::aht10 {

-static const char *const TAG = "aht10";
+ESPHOME_LOG_TAG(TAG, "aht10");
 static const uint8_t AHT10_INITIALIZE_CMD[] = {0xE1, 0x08, 0x00};
 static const uint8_t AHT20_INITIALIZE_CMD[] = {0xBE, 0x08, 0x00};
 static const uint8_t AHT10_MEASURE_CMD[] = {0xAC, 0x33, 0x00};
@@ -0,0 +1 @@
+DOMAIN = "aic3204"
@@ -6,7 +6,7 @@

 namespace esphome::aic3204 {

-static const char *const TAG = "aic3204";
+ESPHOME_LOG_TAG(TAG, "aic3204");

 #define ERROR_CHECK(err, msg) \
  if (!(err)) { \
@@ -6,6 +6,7 @@ from esphome.types import ConfigType

 AUTO_LOAD = ["ble_device_base"]
 CODEOWNERS = ["@jeromelaban"]
+DOMAIN = "airthings_ble"

 airthings_ble_ns = cg.esphome_ns.namespace("airthings_ble")
 AirthingsListener = airthings_ble_ns.class_(
@@ -4,7 +4,7 @@

 namespace esphome::airthings_ble {

-static const char *const TAG = "airthings_ble";
+ESPHOME_LOG_TAG(TAG, "airthings_ble");

 bool AirthingsListener::parse_device(const ble_device_base::ESPBTDevice &device) {
  for (auto &it : device.get_manufacturer_datas()) {
@@ -24,6 +24,7 @@ from esphome.cpp_generator import MockObj
 from esphome.types import ConfigType

 CODEOWNERS = ["@ncareau", "@jeromelaban"]
+DOMAIN = "airthings_wave_base"

 DEPENDENCIES = ["ble_client"]

@@ -8,7 +8,10 @@

 namespace esphome::airthings_wave_base {

-static const char *const TAG = "airthings_wave_base";
+ESPHOME_LOG_TAG(TAG, "airthings_wave_base");
+
+static constexpr uint32_t BATTERY_READ_TIMEOUT_ID = 0;
+static constexpr uint32_t RESPONSE_TIMEOUT_ID = 1;

 void AirthingsWaveBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
                                            esp_ble_gattc_cb_param_t *param) {
@@ -181,7 +184,7 @@ void AirthingsWaveBase::read_battery_(uint8_t *raw_value, uint16_t value_len) {
    // read the battery again at the configured update interval
    if (this->battery_update_interval_ != this->update_interval_) {
      this->read_battery_next_update_ = false;
-      this->set_timeout("battery", this->battery_update_interval_,
+      this->set_timeout(BATTERY_READ_TIMEOUT_ID, this->battery_update_interval_,
                        [this]() { this->read_battery_next_update_ = true; });
    }
  }
@@ -204,7 +207,7 @@ void AirthingsWaveBase::response_received_() {
 }

 void AirthingsWaveBase::set_response_timeout_() {
-  this->set_timeout("response_timeout", 30 * 1000, [this]() {
+  this->set_timeout(RESPONSE_TIMEOUT_ID, 30 * 1000, [this]() {
    this->responses_pending_ = 1;
    this->response_received_();
  });
@@ -1 +1,2 @@
 CODEOWNERS = ["@ncareau"]
+DOMAIN = "airthings_wave_mini"
@@ -4,7 +4,7 @@

 namespace esphome::airthings_wave_mini {

-static const char *const TAG = "airthings_wave_mini";
+ESPHOME_LOG_TAG(TAG, "airthings_wave_mini");

 void AirthingsWaveMini::read_sensors(uint8_t *raw_value, uint16_t value_len) {
  auto *value = (WaveMiniReadings *) raw_value;
@@ -1 +1,2 @@
 CODEOWNERS = ["@jeromelaban", "@precurse"]
+DOMAIN = "airthings_wave_plus"
@@ -4,7 +4,7 @@

 namespace esphome::airthings_wave_plus {

-static const char *const TAG = "airthings_wave_plus";
+ESPHOME_LOG_TAG(TAG, "airthings_wave_plus");

 void AirthingsWavePlus::read_sensors(uint8_t *raw_value, uint16_t value_len) {
  auto *value = (WavePlusReadings *) raw_value;
@@ -21,6 +21,7 @@ from esphome.core.entity_helpers import (
 from esphome.cpp_generator import MockObjClass

 CODEOWNERS = ["@grahambrown11", "@hwstar"]
+DOMAIN = "alarm_control_panel"
 IS_PLATFORM_COMPONENT = True

 CONF_ON_TRIGGERED = "on_triggered"
@@ -10,7 +10,7 @@

 namespace esphome::alarm_control_panel {

-static const char *const TAG = "alarm_control_panel";
+ESPHOME_LOG_TAG(TAG, "alarm_control_panel");

 AlarmControlPanelCall AlarmControlPanel::make_call() { return AlarmControlPanelCall(this); }

@@ -6,7 +6,7 @@

 namespace esphome::alarm_control_panel {

-static const char *const TAG = "alarm_control_panel";
+ESPHOME_LOG_TAG(TAG, "alarm_control_panel");

 AlarmControlPanelCall::AlarmControlPanelCall(AlarmControlPanel *parent) : parent_(parent) {}

@@ -1 +1,2 @@
 CODEOWNERS = ["@jan-hofmeier"]
+DOMAIN = "alpha3"
@@ -7,7 +7,7 @@

 namespace esphome::alpha3 {

-static const char *const TAG = "alpha3";
+ESPHOME_LOG_TAG(TAG, "alpha3");

 void Alpha3::dump_config() {
  ESP_LOGCONFIG(TAG, "ALPHA3");
@@ -1 +1,2 @@
 CODEOWNERS = ["@swoboda1337"]
+DOMAIN = "am2315c"
@@ -26,7 +26,7 @@

 namespace esphome::am2315c {

-static const char *const TAG = "am2315c";
+ESPHOME_LOG_TAG(TAG, "am2315c");

 bool AM2315C::reset_register_(uint8_t reg) {
  //  code based on demo code sent by www.aosong.com
@@ -0,0 +1 @@
+DOMAIN = "am2320"
@@ -10,7 +10,7 @@

 namespace esphome::am2320 {

-static const char *const TAG = "am2320";
+ESPHOME_LOG_TAG(TAG, "am2320");

 void AM2320Component::update() {
  uint8_t data[8];
@@ -1 +1,2 @@
 CODEOWNERS = ["@buxtronix"]
+DOMAIN = "am43"
@@ -5,7 +5,7 @@

 namespace esphome::am43 {

-static const char *const TAG = "am43_cover";
+ESPHOME_LOG_TAG(TAG, "am43_cover");

 using namespace esphome::cover;

@@ -6,7 +6,7 @@

 namespace esphome::am43 {

-static const char *const TAG = "am43";
+ESPHOME_LOG_TAG(TAG, "am43");

 void Am43::dump_config() {
  ESP_LOGCONFIG(TAG, "AM43");
@@ -1 +1,2 @@
 CODEOWNERS = ["@ianchi"]
+DOMAIN = "analog_threshold"
@@ -3,7 +3,7 @@

 namespace esphome::analog_threshold {

-static const char *const TAG = "analog_threshold.binary_sensor";
+ESPHOME_LOG_TAG(TAG, "analog_threshold.binary_sensor");

 void AnalogThresholdBinarySensor::setup() {
  float sensor_value = this->sensor_->get_state();
@@ -0,0 +1 @@
+DOMAIN = "anova"
@@ -5,7 +5,7 @@

 namespace esphome::anova {

-static const char *const TAG = "anova";
+ESPHOME_LOG_TAG(TAG, "anova");

 using namespace esphome::climate;

--- a/Show More
+++ b/Show More