[api] Order the wrong wire type assertions on the raw socket

The barrier was a command on the aioesphomeapi connection, which nothing orders against the
raw frames under test; a well formed frame on the raw socket itself now closes each block and
the assertion checks the exact states seen since the marker.

.github/actions/cache-arduino8266/action.yml

@@ -1,39 +0,0 @@
-name: Cache Arduino ESP8266
-description: >
-  Resolve the pinned Arduino core and xtensa toolchain versions and cache the
-  native ESP8266 install (~110 MB framework + toolchain; no ccache store, the
-  seed job saves before any compile runs). Exports
-  ESPHOME_ARDUINO8266_PREFIX to the job so every later step installs into
-  the cached path; the Python venv must already be restored. Mirrors
-  cache-esp-idf: only dev-branch pushes write the shared cache, everything
-  else restores.
-runs:
-  using: composite
-  steps:
-    - name: Resolve the native toolchain cache key
-      # Versions are pinned in code, not a hashable file; resolve them so a
-      # bump changes the cache key. Assignment form so errexit catches a
-      # resolver failure.
-      id: version
-      shell: bash
-      run: |
-        # One owner for the install prefix: exported here and referenced by
-        # the cache steps below via env, so the caller's install and the
-        # cached path cannot diverge.
-        echo "ESPHOME_ARDUINO8266_PREFIX=$HOME/.esphome-arduino8266" >> "$GITHUB_ENV"
-        . venv/bin/activate
-        key=$(python -c 'from esphome.components.esp8266 import RECOMMENDED_ARDUINO_FRAMEWORK_VERSION as f; from esphome.arduino8266.framework import TOOLCHAIN_VERSION as t; print(f"{f}-{t}")')
-        [ -n "$key" ] || exit 1
-        echo "key=$key" >> "$GITHUB_OUTPUT"
-    - name: Cache the native toolchain (write on dev)
-      if: github.ref == 'refs/heads/dev'
-      uses: actions/cache@55cc8345863c7cc4c66a329aec7e433d2d1c52a9 # v6.1.0
-      with:
-        path: ${{ env.ESPHOME_ARDUINO8266_PREFIX }}
-        key: ${{ runner.os }}-esp8266-native-${{ steps.version.outputs.key }}
-    - name: Restore the native toolchain (off dev)
-      if: github.ref != 'refs/heads/dev'
-      uses: actions/cache/restore@55cc8345863c7cc4c66a329aec7e433d2d1c52a9 # v6.1.0
-      with:
-        path: ${{ env.ESPHOME_ARDUINO8266_PREFIX }}
-        key: ${{ runner.os }}-esp8266-native-${{ steps.version.outputs.key }}

.github/workflows/ci-docker.yml

@@ -21,7 +21,6 @@ on:
       - "esphome/core/**"
       - "esphome/writer.py"
       - "esphome/build_gen/**"
-      - "esphome/build_helpers/**"
       - "esphome/espidf/**"
       - "esphome/platformio/**"
       - "esphome/components/bk72xx/**"
@@ -198,7 +197,6 @@ jobs:
         # the default.
         id:
           - esp8266-arduino
-          - esp8266-arduino-native
           - esp32-arduino-platformio
           - esp32-arduino-esp-idf
           - esp32-idf-platformio
@@ -209,16 +207,6 @@ jobs:
           - ln882x-arduino
           - nrf52
           - host
-        # Strict by default so a new matrix id cannot silently join in the
-        # degrade-quietly mode the knob exists to catch.
-        # Opt-outs: libretiny GCC rejects its own pch until a toolchain bump.
-        include:
-          - id: bk72xx-arduino
-            pch_strict: "0"
-          - id: rtl87xx-arduino
-            pch_strict: "0"
-          - id: ln882x-arduino
-            pch_strict: "0"
     steps:
       - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
       - name: Download image artifact
@@ -230,7 +218,6 @@ jobs:
       - name: Compile ${{ matrix.id }}
         run: |
           docker run --rm \
-            -e ESPHOME_PCH_STRICT="${{ matrix.pch_strict || '1' }}" \
             -v "${{ github.workspace }}/docker/test_configs:/config" \
             "ghcr.io/esphome/esphome-amd64:${{ needs.check-docker.outputs.tag }}" \
             compile "${{ matrix.id }}.yaml"

.github/workflows/ci.yml

@@ -102,8 +102,6 @@ jobs:
       device-builder: ${{ steps.determine.outputs.device-builder }}
       esp32-platformio: ${{ steps.determine.outputs.esp32-platformio }}
       esp32-platformio-components: ${{ steps.determine.outputs.esp32-platformio-components }}
-      esp8266-native: ${{ steps.determine.outputs.esp8266-native }}
-      esp8266-native-components: ${{ steps.determine.outputs.esp8266-native-components }}
       changed-components: ${{ steps.determine.outputs.changed-components }}
       changed-components-with-tests: ${{ steps.determine.outputs.changed-components-with-tests }}
       directly-changed-components-with-tests: ${{ steps.determine.outputs.directly-changed-components-with-tests }}
@@ -167,8 +165,6 @@ jobs:
           echo "device-builder=$(echo "$output" | jq -r '.device_builder')" >> $GITHUB_OUTPUT
           echo "esp32-platformio=$(echo "$output" | jq -r '.esp32_platformio')" >> $GITHUB_OUTPUT
           echo "esp32-platformio-components=$(echo "$output" | jq -r '.esp32_platformio_components')" >> $GITHUB_OUTPUT
-          echo "esp8266-native=$(echo "$output" | jq -r '.esp8266_native')" >> $GITHUB_OUTPUT
-          echo "esp8266-native-components=$(echo "$output" | jq -r '.esp8266_native_components')" >> $GITHUB_OUTPUT
           echo "changed-components=$(echo "$output" | jq -c '.changed_components')" >> $GITHUB_OUTPUT
           echo "changed-components-with-tests=$(echo "$output" | jq -c '.changed_components_with_tests')" >> $GITHUB_OUTPUT
           echo "directly-changed-components-with-tests=$(echo "$output" | jq -c '.directly_changed_components_with_tests')" >> $GITHUB_OUTPUT
@@ -187,32 +183,6 @@ jobs:
           path: .temp/components_graph.json
           key: components-graph-${{ hashFiles('esphome/components/**/*.py') }}
 
-  seed-esp8266-native-cache:
-    name: Seed the esp8266 native toolchain cache
-    runs-on: ubuntu-24.04
-    needs:
-      - common
-    # PR-branch cache saves are invisible to other PRs, so dev pushes seed
-    # the shared entry test-esp8266-native restores. Only dev: the composite
-    # action saves nowhere else, so a beta/release push would download the
-    # toolchain and discard it.
-    if: github.event_name == 'push' && github.ref == 'refs/heads/dev'
-    timeout-minutes: 15
-    steps:
-      - name: Check out code from GitHub
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
-      - name: Restore Python
-        uses: ./.github/actions/restore-python
-        with:
-          python-version: ${{ env.DEFAULT_PYTHON }}
-          cache-key: ${{ needs.common.outputs.cache-key }}
-      - name: Cache the native toolchain
-        uses: ./.github/actions/cache-arduino8266
-      - name: Install the native toolchain
-        run: |
-          . venv/bin/activate
-          python -c "from esphome.arduino8266.framework import check_and_install; from esphome.components.esp8266 import RECOMMENDED_ARDUINO_FRAMEWORK_VERSION; check_and_install(RECOMMENDED_ARDUINO_FRAMEWORK_VERSION)"
-
   ci-custom:
     name: Run script/ci-custom
     runs-on: ubuntu-24.04
@@ -274,20 +244,11 @@ jobs:
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
-      - name: Read prek version from requirements_test.txt
-        id: prek
-        # requirements_test.txt is the only place the version is pinned, so a
-        # Dependabot bump there is picked up here without a second edit.
-        run: |
-          if ! version=$(sed -nE 's/^prek==([^[:space:]#]+).*/\1/p' requirements_test.txt) || [ -z "$version" ]; then
-            echo "::error::No prek== pin found in requirements_test.txt."
-            exit 1
-          fi
-          echo "version=$version" >> "$GITHUB_OUTPUT"
       - name: Run prek
         uses: j178/prek-action@4e14d07f9231acabce116ccfca13b13dd9755ece # v3.0.0
         with:
-          prek-version: ${{ steps.prek.outputs.version }}
+          # Keep in sync with requirements_test.txt.
+          prek-version: "0.4.11"
           # This job only runs on pull requests, so nothing ever populates
           # the cache on dev. Every run would miss and then write a per-pull
           # request copy, which is what the old seed-cache job existed to
@@ -1267,7 +1228,7 @@ jobs:
 
           # compile validates config first, so a separate config pass is
           # redundant for this smoke test. ESP-IDF framework via PlatformIO:
-          python3 script/test_build_components.py -e compile -t esp32-idf -c "$TEST_COMPONENTS" -f --toolchain platformio --fail-on-no-tests
+          python3 script/test_build_components.py -e compile -t esp32-idf -c "$TEST_COMPONENTS" -f --toolchain platformio
 
           echo ""
           echo "ESP-IDF-via-PlatformIO build passed! Starting Arduino smoke test..."
@@ -1276,42 +1237,6 @@ jobs:
           # Arduino framework via PlatformIO (only components with an esp32-ard test are built):
           python3 script/test_build_components.py -e compile -t esp32-ard -c "$TEST_COMPONENTS" -f --toolchain platformio
 
-  test-esp8266-native:
-    name: Test esp8266 components with the native toolchain
-    runs-on: ubuntu-24.04
-    needs:
-      - common
-      - determine-jobs
-    if: github.event_name == 'pull_request' && needs.determine-jobs.outputs.esp8266-native == 'true'
-    env:
-      # Computed by script/determine-jobs.py (ESP8266_NATIVE_TEST_COMPONENTS)
-      TEST_COMPONENTS: ${{ needs.determine-jobs.outputs.esp8266-native-components }}
-    steps:
-      - name: Check out code from GitHub
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
-
-      - name: Restore Python
-        uses: ./.github/actions/restore-python
-        with:
-          python-version: ${{ env.DEFAULT_PYTHON }}
-          cache-key: ${{ needs.common.outputs.cache-key }}
-
-      - name: Cache the native toolchain
-        uses: ./.github/actions/cache-arduino8266
-
-      - name: Run native toolchain compile test
-        run: |
-          . venv/bin/activate
-
-          echo "Testing components: $TEST_COMPONENTS"
-          echo ""
-
-          # ESP8266 Arduino built directly (no PlatformIO); compile validates
-          # config first, so a separate config pass is redundant. Strict pch:
-          # exercises the native ninja pch (and its probe edge) against real
-          # component configs; the docker matrix smoke-tests both toolchains.
-          ESPHOME_PCH_STRICT=1 python3 script/test_build_components.py -e compile -t esp8266-ard -c "$TEST_COMPONENTS" -f --toolchain arduino --fail-on-no-tests
-
   device-builder:
     name: Test downstream esphome/device-builder
     runs-on: ubuntu-24.04
@@ -1674,7 +1599,6 @@ jobs:
     needs:
       - common
       - seed-apt-cache
-      - seed-esp8266-native-cache
       - determine-jobs
       - ci-custom
       - pylint
@@ -1690,7 +1614,6 @@ jobs:
       - clang-tidy-esp32-variants
       - test-build-components-split
       - test-esp32-platformio
-      - test-esp8266-native
       - device-builder
       - memory-impact-target-branch
       - memory-impact-pr-branch

.github/workflows/sync-dependency-versions.yml

@@ -1,94 +0,0 @@
-# Keeps pre-commit hook revs in sync with the requirements files.
-#
-# Dependabot only bumps the pins in requirements*.txt. Some of those tools
-# are pinned again as hook revs in .pre-commit-config.yaml. This workflow
-# runs script/sync_dependency_versions.py against the pull request branch
-# and pushes a commit with the revs updated.
-
-name: Sync dependency versions
-
-on:
-  # pull_request_target rather than pull_request so the App secret is
-  # available on Dependabot pull requests (pull_request runs opened by
-  # Dependabot only see Dependabot secrets). The job below only touches
-  # branches in this repository and only ever executes the script from the
-  # base branch checkout, so fork code never runs with the token.
-  pull_request_target:
-    types: [opened, synchronize, reopened]
-    paths:
-      - requirements_dev.txt
-      - requirements_test.txt
-      - .pre-commit-config.yaml
-      - script/sync_dependency_versions.py
-
-# The push to the pull request branch uses the App token minted below, so
-# the workflow's GITHUB_TOKEN does not need any scopes.
-permissions: {}
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
-  cancel-in-progress: true
-
-jobs:
-  sync:
-    name: Sync pinned versions
-    runs-on: ubuntu-latest
-    # Same-repository branches only: a push to a fork is not possible with
-    # this token, and it keeps untrusted heads out of a privileged job.
-    if: >-
-      github.repository == 'esphome/esphome'
-      && github.event.pull_request.head.repo.full_name == github.repository
-    steps:
-      - name: Generate a token
-        id: generate-token
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
-        with:
-          client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
-          private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
-          # A push made with the workflow's own GITHUB_TOKEN would not start
-          # CI on the new commit; a push with the App token does.
-          permission-contents: write  # git push of the sync commit to the pull request branch
-
-      - name: Check out base branch
-        # Provides the script that runs below. Deliberately the base branch
-        # so the pull request cannot change what executes here.
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
-        with:
-          ref: ${{ github.event.pull_request.base.sha }}
-          persist-credentials: false
-
-      - name: Check out pull request branch
-        # No allow-unsafe-pr-checkout here on purpose: checkout v7 only
-        # refuses heads that live in a different repository, and the job
-        # condition above already limits runs to same-repository branches.
-        # Leaving it off keeps that refusal as a backstop for fork heads.
-        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
-        with:
-          ref: ${{ github.event.pull_request.head.ref }}
-          path: pull-request
-          token: ${{ steps.generate-token.outputs.token }}
-
-      - name: Set up Python
-        uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97 # v7.0.0
-        with:
-          python-version: "3.12"
-
-      - name: Install yamlrocks
-        # The script edits YAML through yamlrocks. Take the pin from the
-        # base branch requirements so this workflow has no copy of its own.
-        run: pip install "$(grep -E '^yamlrocks==' requirements_test.txt | cut -d'#' -f1)"
-
-      - name: Sync pinned versions
-        run: python script/sync_dependency_versions.py --root pull-request
-
-      - name: Push changes
-        working-directory: pull-request
-        run: |
-          if git diff --quiet; then
-            echo "All pinned versions already match the requirements files."
-            exit 0
-          fi
-          git config user.name "esphome[bot]"
-          git config user.email "115708604+esphome[bot]@users.noreply.github.com"
-          git commit -am "Sync pinned tool versions with requirements files"
-          git push

.pre-commit-config.yaml

@@ -1,6 +1,7 @@
 ---
 # See https://pre-commit.com for more information
 # See https://pre-commit.com/hooks.html for more hooks
+
 ci:
   autoupdate_commit_msg: 'pre-commit: autoupdate'
   autoupdate_schedule: off  # Disabled until ruff versions are synced between deps and pre-commit
@@ -10,7 +11,7 @@ ci:
 repos:
   - repo: https://github.com/astral-sh/ruff-pre-commit
     # Ruff version.
-    rev: v0.16.6
+    rev: v0.16.3
     hooks:
       # Run the linter.
       - id: ruff
@@ -41,7 +42,7 @@ repos:
       - id: pyupgrade
         args: [--py312-plus]
   - repo: https://github.com/adrienverge/yamllint.git
-    rev: v1.38.0
+    rev: v1.37.1
     hooks:
       - id: yamllint
         exclude: ^(\.clang-format|\.clang-tidy)$

AGENTS.md

@@ -840,7 +840,7 @@ file does, and it is the authority when they disagree. The most useful starting
         cv.rename_key(
             CONF_OLD_KEY, CONF_NEW_KEY, removed_in="2026.6.0", component="my_component"
         ),
-        cv.Schema({...}),
+        cv.Schema({ ... }),
     )
     ```
     For other deprecations, warn manually during validation:

docker/Dockerfile

@@ -22,7 +22,7 @@ RUN \
     -r /requirements.txt
 
 # Install the ESPHome Device Builder dashboard.
-RUN uv pip install --no-cache-dir esphome-device-builder==1.14.5
+RUN uv pip install --no-cache-dir esphome-device-builder==1.14.4
 
 RUN \
     platformio settings set enable_telemetry No \

docker/test_configs/esp8266-arduino-native.yaml

@@ -1,8 +0,0 @@
-esphome:
-  name: docker-test-esp8266-native
-
-esp8266:
-  board: d1_mini
-  toolchain: arduino
-
-logger:

esphome/__main__.py

@@ -817,9 +817,7 @@ def write_cpp_file() -> int:
         from esphome.build_gen import espidf
 
         espidf.write_project()
-    elif not CORE.using_native_toolchain:
-        # Other native builds generate their project at compile time;
-        # never write a platformio.ini for them
+    else:
         from esphome.build_gen import platformio
 
         platformio.write_project()
@@ -861,14 +859,20 @@ def compile_program(args: ArgsProtocol, config: ConfigType) -> int:
         toolchain.create_factory_bin()
         toolchain.create_ota_bin()
         toolchain.create_elf_copy()
-        from esphome.build_helpers.idedata import warn_if_idedata_missing
+        from esphome.build_helpers.idedata import IDEDATA_BEST_EFFORT_ERRORS
 
-        warn_if_idedata_missing(toolchain.get_idedata)
-    elif CORE.using_native_toolchain:
-        raise EsphomeError(
-            f"Toolchain '{CORE.toolchain.value}' resolved but no platform "
-            "backend claimed the build"
-        )
+        try:
+            if toolchain.get_idedata() is None:
+                _LOGGER.warning("No idedata was generated for this build")
+        except IDEDATA_BEST_EFFORT_ERRORS as err:
+            # The firmware already built; an idedata failure must not fail
+            # a successful build.
+            _LOGGER.warning(
+                "Could not generate idedata: %s (IDE, clang-tidy, and "
+                "memory-analysis data will be unavailable for this build)",
+                err,
+            )
+            _LOGGER.debug("Idedata failure detail", exc_info=True)
     else:
         from esphome.platformio import toolchain
 
@@ -971,15 +975,12 @@ def upload_using_esptool(
 
     if file is not None:
         flash_images = [FlashImage(path=file, offset="0x0")]
-    elif (native := _native_toolchain_module()) is not None:
-        # Every native backend supplies its own 0x0 flash image (bootloader
-        # and partitions included where the target needs them)
-        image = native.get_factory_firmware_path()
-        if not image.is_file():
-            raise EsphomeError(
-                f"{image} does not exist; compile the configuration first"
-            )
-        flash_images = [FlashImage(path=image, offset="0x0")]
+    elif CORE.using_toolchain_esp_idf:
+        from esphome.espidf import toolchain
+
+        flash_images = [
+            FlashImage(path=toolchain.get_factory_firmware_path(), offset="0x0")
+        ]
     else:
         from esphome.platformio import toolchain
 
@@ -1961,39 +1962,15 @@ def command_update_all(args: ArgsProtocol) -> int | None:
     return run_multiple_configs(files, build_command)
 
 
-# Native build backend per (target platform, toolchain). Keyed here rather
-# than through a platform hook so the serial upload/logs fast path never
-# imports the platform component package (see the esp32 variant comment in
-# upload_using_esptool); the platform half comes from CORE.data the same way.
-_NATIVE_TOOLCHAIN_MODULES = {
-    ("esp32", Toolchain.ESP_IDF): "esphome.espidf.toolchain",
-    ("esp8266", Toolchain.ARDUINO): "esphome.arduino8266.toolchain",
-}
-
-
-def _native_toolchain_module():
-    """The native build backend module for the resolved toolchain."""
-    if not CORE.using_native_toolchain:
-        return None
-    key = (CORE.target_platform, CORE.toolchain)
-    if (module_path := _NATIVE_TOOLCHAIN_MODULES.get(key)) is None:
-        # Degrading to the PlatformIO path would build with the wrong backend
-        raise EsphomeError(
-            f"Toolchain '{CORE.toolchain.value}' has no native build backend "
-            f"module for platform {CORE.target_platform}"
-        )
-    return importlib.import_module(module_path)
-
-
 def command_idedata(args: ArgsProtocol, config: ConfigType) -> int:
     import json
 
-    native_toolchain = _native_toolchain_module()
+    if CORE.using_toolchain_esp_idf:
+        # Native ESP-IDF derives idedata from the build's compile_commands.json,
+        # so the configuration must already be compiled.
+        from esphome.espidf import toolchain as espidf_toolchain
 
-    if native_toolchain is not None:
-        # Native toolchains derive idedata from the build's
-        # compile_commands.json, so the configuration must already be compiled.
-        idedata = native_toolchain.get_idedata()
+        idedata = espidf_toolchain.get_idedata()
         if idedata is None:
             _LOGGER.error(
                 "No idedata available; compile the configuration first",
@@ -2032,17 +2009,6 @@ def command_analyze_memory(args: ArgsProtocol, config: ConfigType) -> int:
     from esphome.analyze_memory.cli import MemoryAnalyzerCLI
     from esphome.analyze_memory.ram_strings import RamStringsAnalyzer
 
-    # Refuse an unsupported toolchain before paying for a full compile
-    native_toolchain = _native_toolchain_module()
-    if native_toolchain is None and not CORE.using_toolchain_platformio:
-        _LOGGER.error(
-            "analyze-memory is not supported with the '%s' toolchain on %s; "
-            "re-run with --toolchain platformio",
-            CORE.toolchain.value if CORE.toolchain else "unresolved",
-            CORE.target_platform,
-        )
-        return 1
-
     # Always compile to ensure fresh data (fast if no changes - just relinks)
     exit_code = write_cpp(config)
     if exit_code != 0:
@@ -2054,31 +2020,13 @@ def command_analyze_memory(args: ArgsProtocol, config: ConfigType) -> int:
 
     # Get idedata for analysis
     idedata = None
-    if native_toolchain is not None:
-        objdump = native_toolchain.get_objdump_path()
-        readelf = native_toolchain.get_readelf_path()
-        for tool in (objdump, readelf):
-            if not tool.is_file():
-                # The analyzer would silently fall back to host binutils,
-                # which cannot read the target ELF. clean-all is heavy for
-                # ESP-IDF, so suggest a recompile first.
-                _LOGGER.error(
-                    "%s is missing; the toolchain install may be incomplete "
-                    "(recompile, or run 'esphome clean-all' if it persists)",
-                    tool,
-                )
-                return 1
-        objdump_path = str(objdump)
-        readelf_path = str(readelf)
+    if CORE.using_toolchain_esp_idf:
+        from esphome.espidf import toolchain
 
-        firmware_elf = native_toolchain.get_elf_path()
-        if not firmware_elf.is_file():
-            # The analyzer swallows tool failures, so a missing ELF would
-            # produce an exit-0 zeroed report
-            _LOGGER.error(
-                "%s is missing; compile the configuration first", firmware_elf
-            )
-            return 1
+        objdump_path = str(toolchain.get_objdump_path())
+        readelf_path = str(toolchain.get_readelf_path())
+
+        firmware_elf = toolchain.get_elf_path()
     else:
         from esphome.platformio import toolchain
 

esphome/api_client.py

@@ -23,7 +23,9 @@ from esphome.util import safe_print
 if TYPE_CHECKING:
     from collections.abc import Callable
 
-    from aioesphomeapi.api_pb2 import SubscribeLogsResponse  # pylint: disable=no-name-in-module
+    from aioesphomeapi.api_pb2 import (
+        SubscribeLogsResponse,  # pylint: disable=no-name-in-module
+    )
 
 
 _LOGGER = logging.getLogger(__name__)

esphome/arduino8266/framework.py

@@ -19,11 +19,10 @@ from typing import NamedTuple
 
 from esphome.build_helpers.ccache import ccache_defaults_env
 from esphome.build_helpers.ninja import find_ninja
-from esphome.build_helpers.pch import ccache_pch_env
 from esphome.build_helpers.tools_cache import ARDUINO8266_TOOLS_CACHE, tools_cache_path
 from esphome.core import EsphomeError, Version
 from esphome.framework_helpers import str_to_lst_of_str
-from esphome.platformio.registry import install_packages, prefetch_packages
+from esphome.platformio.registry import install_package, prefetch_packages
 
 FRAMEWORK_PACKAGE = "framework-arduinoespressif8266"
 TOOLCHAIN_PACKAGE = "toolchain-xtensa"
@@ -116,9 +115,10 @@ def check_and_install(framework_version: Version) -> InstalledPaths:
             ("bin", "xtensa-lx106-elf"),
         ),
     )
-    # Fetch both archives at once; the install verifies and extracts them
+    # Fetch both archives at once; the installs below verify and extract
     prefetch_packages([spec[:4] for spec in specs], downloads_dir)
-    install_packages(specs, downloads_dir)
+    for name, version, dest, mirrors, expect in specs:
+        install_package(name, version, dest, mirrors, downloads_dir, expect=expect)
     return InstalledPaths(
         framework=framework_path, toolchain=toolchain_path, ninja=ninja_path
     )
@@ -156,6 +156,4 @@ def ccache_env(ccache: str | None) -> dict[str, str]:
     """
     if ccache is None:
         return {}
-    env = ccache_defaults_env(get_arduino8266_tools_path() / "ccache")
-    env.update(ccache_pch_env())
-    return env
+    return ccache_defaults_env(get_arduino8266_tools_path() / "ccache")

esphome/arduino8266/toolchain.py

@@ -1,329 +0,0 @@
-"""Native Arduino ESP8266 build driver (the PlatformIO ``run`` equivalent)."""
-
-from __future__ import annotations
-
-import json
-import logging
-from pathlib import Path
-import subprocess
-from typing import Any
-
-from esphome.arduino8266 import framework
-from esphome.build_helpers.ccache import resolve_ccache_path
-from esphome.const import (
-    CONF_COMPILE_PROCESS_LIMIT,
-    CONF_ESPHOME,
-    KEY_CORE,
-    KEY_FRAMEWORK_VERSION,
-)
-from esphome.core import CORE, EsphomeError
-from esphome.helpers import write_file_if_changed
-from esphome.types import ConfigType
-
-_LOGGER = logging.getLogger(__name__)
-
-# ESP8266 user RAM (matches upload.maximum_ram_size in every board manifest)
-_MAX_RAM_SIZE = 81920
-
-
-def _warn_ignored_platformio_options() -> None:
-    """Warn for component-added platformio options the native build drops.
-
-    The consumed set is exported by core/config.py next to the routing that
-    stores these options, so the two cannot drift; YAML upload_speed never
-    reaches CORE.platformio_options here.
-    """
-    from esphome.core.config import NATIVE_ARDUINO_CONSUMED_PIO_OPTIONS
-
-    consumed = NATIVE_ARDUINO_CONSUMED_PIO_OPTIONS
-    for key in sorted(CORE.platformio_options or {}):
-        if key not in consumed:
-            _LOGGER.warning(
-                "platformio_options->%s is ignored when building with the "
-                "native 'arduino' toolchain",
-                key,
-            )
-
-
-_RAM_SECTIONS = (".data", ".rodata", ".bss")
-_FLASH_SECTIONS = (".irom0.text", ".text", ".text1", ".data", ".rodata")
-
-
-def get_build_dir() -> Path:
-    return CORE.relative_pioenvs_path(CORE.name)
-
-
-def get_elf_path() -> Path:
-    return get_build_dir() / "firmware.elf"
-
-
-def _toolchain_tool(name: str) -> Path:
-    return framework.toolchain_tool(framework.get_toolchain_path(), name)
-
-
-def get_factory_firmware_path() -> Path:
-    """The image to serial-flash at 0x0 (same bytes as firmware.bin: the
-    8266 factory copy exists for artifact-contract parity, not content)."""
-    return get_build_dir() / "firmware.factory.bin"
-
-
-def get_addr2line_path() -> Path:
-    return _toolchain_tool("addr2line")
-
-
-def get_objdump_path() -> Path:
-    return _toolchain_tool("objdump")
-
-
-def get_readelf_path() -> Path:
-    return _toolchain_tool("readelf")
-
-
-def run_compile(config: ConfigType, verbose: bool) -> int:
-    from esphome.build_gen import arduino8266 as build_gen
-
-    _warn_ignored_platformio_options()
-    paths = framework.check_and_install(CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION])
-    # Resolved once per build: the resolution probes PATH and spawns the
-    # runnability check, and three consumers need the same answer
-    ccache = resolve_ccache_path()
-    ninja_changed = build_gen.write_project(paths, ccache)
-
-    build_dir = get_build_dir()
-    env = framework.get_build_env(paths.toolchain, ccache)
-
-    # Regenerate the compile DB before the build (a pure function of
-    # build.ninja); skip only when it is at least as fresh as build.ninja
-    # (an interrupted previous run may have rewritten the manifest without
-    # regenerating the DB).
-    compdb = build_dir / "compile_commands.json"
-    compdb_stamp = build_dir / ".compile_commands.stamp"
-    ninja_file = build_dir / "build.ninja"
-    # Freshness rides a stamp: the DB itself is written through
-    # write_file_if_changed (its mtime feeds get_idedata's cache), so a
-    # regeneration with identical content would stay "stale" forever
-    if (
-        ninja_changed
-        or not compdb.is_file()
-        or not compdb_stamp.is_file()
-        or compdb_stamp.stat().st_mtime < ninja_file.stat().st_mtime
-    ):
-        _write_compile_commands(paths.ninja, build_dir, env)
-        compdb_stamp.touch()
-
-    cmd = [str(paths.ninja)]
-    if verbose:
-        cmd.append("-v")
-    if jobs := config[CONF_ESPHOME].get(CONF_COMPILE_PROCESS_LIMIT):
-        cmd += ["-j", str(jobs)]
-    # Explicit targets, not the default statement: a generator defect that
-    # drops them fails loudly with "unknown target" instead of a green
-    # no-op run that leaves stale artifacts in place
-    targets = ["firmware.factory.bin", "firmware.ota.bin"]
-    cmd += targets
-
-    # A dry-run probe keeps a no-op rebuild quiet: ninja would only print
-    # "no work to do". A freshly rewritten manifest all but guarantees work,
-    # so skip the probe (and its full stat pass) on that path. cwd instead
-    # of -C also drops the "Entering directory" banner on real builds.
-    skip_build = False
-    if not ninja_changed:
-        probe = subprocess.run(
-            [str(paths.ninja), "-n", *targets],
-            cwd=build_dir,
-            env=env,
-            capture_output=True,
-            text=True,
-            check=False,
-            close_fds=False,
-        )
-        if probe.stderr.strip():
-            # A load-time diagnostic (e.g. "multiple rules generate X")
-            # flags a generator bug; the skip branch would otherwise
-            # swallow it forever
-            _LOGGER.warning("ninja: %s", probe.stderr.strip())
-        if probe.returncode != 0:
-            # An unknown target here is the defective-manifest case; fall
-            # through to the real build so the error prints attributably
-            _LOGGER.debug("ninja probe failed; running the full build")
-        skip_build = probe.returncode == 0 and "no work to do" in probe.stdout
-    if skip_build:
-        _LOGGER.debug("ninja: nothing to rebuild")
-    else:
-        _LOGGER.debug("Running: %s", " ".join(cmd))
-        rc = subprocess.run(
-            cmd, cwd=build_dir, env=env, check=False, close_fds=False
-        ).returncode
-        if rc != 0:
-            return rc
-
-    # ninja already refused a manifest missing the explicit targets above;
-    # existence covers the remaining hole (a rule that ran but wrote
-    # elsewhere). The factory/ota copies are what upload and OTA consume.
-    build_dir_artifacts = (
-        get_elf_path(),
-        build_dir / "firmware.bin",
-        get_factory_firmware_path(),
-        build_dir / "firmware.ota.bin",
-    )
-    for artifact in build_dir_artifacts:
-        if not artifact.is_file():
-            _LOGGER.error("Build produced no %s", artifact)
-            return 1
-
-    if not _print_size_summary(build_dir, paths):
-        # The cause was already warned; name the consequence so a build
-        # contributing no RAM/Flash metric is visible to CI harnesses
-        _LOGGER.warning("Firmware size summary unavailable for this build")
-    from esphome.build_helpers.idedata import warn_if_idedata_missing
-
-    warn_if_idedata_missing(lambda: get_idedata(ccache))
-    return 0
-
-
-def _write_compile_commands(
-    ninja_path: Path, build_dir: Path, env: dict[str, str]
-) -> None:
-    compdb = build_dir / "compile_commands.json"
-    result = subprocess.run(
-        [str(ninja_path), "-C", str(build_dir), "-t", "compdb", "c", "cxx", "asm"],
-        env=env,
-        capture_output=True,
-        text=True,
-        check=False,
-        close_fds=False,
-    )
-    if result.returncode != 0:
-        # Drop any stale database so consumers (IDE integration, clang-tidy,
-        # the memory analyzer) can't silently read outdated data.
-        compdb.unlink(missing_ok=True)
-        raise EsphomeError(f"Could not generate compile_commands.json: {result.stderr}")
-    try:
-        entries = json.loads(result.stdout)
-    except ValueError as err:
-        compdb.unlink(missing_ok=True)
-        raise EsphomeError(
-            f"ninja produced an unparsable compile database: {err} "
-            f"(output starts {result.stdout[:120]!r})"
-        ) from err
-    if not entries:
-        # compdb exits 0 with [] for unknown rule names; a renamed compile
-        # rule must fail the build, not silently strand every consumer
-        compdb.unlink(missing_ok=True)
-        raise EsphomeError(
-            "ninja produced an empty compile database; the generator's rule "
-            "names no longer match"
-        )
-    # write_file_if_changed keeps the mtime stable on no-op builds so the
-    # idedata cache in get_idedata() stays valid.
-    write_file_if_changed(compdb, result.stdout)
-
-
-def _parse_app_size(build_dir: Path, paths: framework.InstalledPaths) -> int | None:
-    """Read the app flash budget (irom0_0_seg length) from the linker script."""
-    from esphome.build_gen.arduino8266 import get_flash_ld_path
-    from esphome.components.esp8266.build_surgery import segment_length
-
-    # Warnings, not debug: without the app size the Flash summary line is
-    # dropped and CI's memory-impact extraction loses its flash metric.
-    ld_path = get_flash_ld_path(build_dir, paths)
-    try:
-        ld_text = ld_path.read_text(encoding="utf-8")
-    except (OSError, UnicodeDecodeError) as err:
-        # UnicodeDecodeError: a truncated/corrupt script must degrade to
-        # the same warning, never abort an already-linked build
-        _LOGGER.warning("Cannot read linker script for the Flash summary: %s", err)
-        return None
-    app_size = segment_length(ld_text, "irom0_0_seg")
-    if app_size is None:
-        _LOGGER.warning("irom0_0_seg not found in %s; skipping Flash summary", ld_path)
-        return None
-    if app_size == 0:
-        _LOGGER.warning(
-            "irom0_0_seg has zero length in %s; skipping Flash summary", ld_path
-        )
-        return None
-    return app_size
-
-
-def _print_size_summary(build_dir: Path, paths: framework.InstalledPaths) -> bool:
-    """Print the PlatformIO-shaped RAM/Flash lines; False when skipped.
-
-    The exact shape (including the bar) is parsed by
-    ``script/ci_memory_impact_extract.py``; ``print_size_line`` matches it.
-    """
-    from esphome.build_helpers.size_summary import print_size_line
-
-    size_tool = _toolchain_tool("size")
-    try:
-        result = subprocess.run(
-            [str(size_tool), "-A", "-d", str(get_elf_path())],
-            capture_output=True,
-            text=True,
-            check=False,
-            close_fds=False,
-        )
-    except OSError as err:
-        # The summary is a bonus artifact like idedata; a truncated
-        # toolchain extraction must not discard an already-linked build
-        _LOGGER.warning("Could not summarize firmware size: %s", err)
-        return False
-    if result.returncode != 0:
-        _LOGGER.warning("Could not summarize firmware size: %s", result.stderr)
-        return False
-    sections: dict[str, int] = {}
-    for line in result.stdout.splitlines():
-        parts = line.split()
-        if len(parts) >= 2 and parts[0].startswith("."):
-            try:
-                sections[parts[0]] = int(parts[1])
-            except ValueError:
-                # An unparsed RAM/Flash section trips the missing-sections
-                # guard below, so no total is built on a dropped value
-                _LOGGER.warning("Unparsable size output for section %s", parts[0])
-    if missing := set(_RAM_SECTIONS + _FLASH_SECTIONS) - set(sections):
-        # A defaulted 0 would print a confidently wrong total for CI's metric
-        _LOGGER.warning(
-            "Size output is missing section(s) %s; skipping the size summary",
-            ", ".join(sorted(missing)),
-        )
-        return False
-    # Resolve the flash budget before printing anything: a RAM line without
-    # its Flash line would let CI's memory-impact extraction sum the two
-    # metrics over different build counts (_parse_app_size already warned).
-    app_size = _parse_app_size(build_dir, paths)
-    if not app_size:
-        return False
-    ram = sum(sections[s] for s in _RAM_SECTIONS)
-    flash = sum(sections[s] for s in _FLASH_SECTIONS)
-    print_size_line("RAM", ram, _MAX_RAM_SIZE)
-    print_size_line("Flash", flash, app_size)
-    return True
-
-
-# Sentinel: "resolve for me"; None is a real value meaning disabled.
-_CCACHE_UNRESOLVED: Any = object()
-
-
-def get_idedata(ccache: str | None = _CCACHE_UNRESOLVED) -> dict | None:
-    """Derive idedata from the build's compile_commands.json.
-
-    Same contract as ``espidf.toolchain.get_idedata``: the fields IDE
-    integrations, clang-tidy, and the memory analyzer expect.
-    """
-    from esphome.build_helpers.idedata import load_or_build_idedata
-
-    if ccache is _CCACHE_UNRESOLVED:
-        # Deliberately uncached: env/PATH can change between builds in a
-        # long-lived host process
-        ccache = resolve_ccache_path()
-    return load_or_build_idedata(
-        get_build_dir() / "compile_commands.json",
-        get_elf_path(),
-        # Suffixed so a platformio->arduino->platformio round trip on one
-        # config never serves the other toolchain's cache shape
-        CORE.relative_internal_path("idedata", f"{CORE.name}.arduino.json"),
-        # The compile DB's commands carry the same ccache prefix the ninja
-        # rules were generated with
-        launcher=str(ccache) if ccache else None,
-    )

esphome/build_gen/build_tool.py

@@ -6,7 +6,6 @@ started esphome and must not depend on the package being importable.
 Subcommands:
     ar <ar-binary> <archive> <rspfile>   remove stale archive, then ``ar rcs``
     copy <src> <dst>                     copy a file
-    touch <path>                         create/update a stamp file
 
 The ar rspfile carries one object path per line (the generating rule must
 use ``$in_newline``, never ``$in``).
@@ -84,18 +83,9 @@ def _run_copy(src: str, dst: str) -> int:
     return 0
 
 
-def _run_touch(path: str) -> int:
-    try:
-        Path(path).touch()
-    except OSError as err:
-        print(f"touch: {path} failed: {err}", file=sys.stderr)
-        return 1
-    return 0
-
-
 # mode -> (handler, expected operand count); surplus argv means a
 # mis-specified ninja rule and must error, not silently drop operands
-_MODES = {"ar": (_run_ar, 3), "copy": (_run_copy, 2), "touch": (_run_touch, 1)}
+_MODES = {"ar": (_run_ar, 3), "copy": (_run_copy, 2)}
 
 
 def main() -> int:

esphome/build_gen/espidf.py

@@ -4,14 +4,6 @@ import json
 import logging
 from pathlib import Path
 
-from esphome.build_helpers import pch
-from esphome.build_helpers.pch import (
-    PCH_DEFAULT_HEADERS,
-    PCH_HEADER_NAME,
-    mark_pch_emitted,
-    pch_enabled,
-    pch_header_text,
-)
 from esphome.components.esp32 import (
     get_esp32_variant,
     get_excluded_builtin_components,
@@ -287,47 +279,7 @@ idf_component_register(
 target_link_options(${{COMPONENT_LIB}} PUBLIC
     {link_opts_str}
 )
-{_pch_cmake()}"""
-
-
-def _pch_cmake() -> str:
-    """Consumer block for the component CMakeLists. Baked at generation:
-    a strict-knob flip takes effect on the next esphome compile; a
-    hand-run idf.py keeps the old one."""
-    return pch.pch_cmake_consumer("${COMPONENT_LIB}", "${app_sources}")
-
-
-def prepare_pch() -> None:
-    """Build the .gch right before ninja, after every reconfigure, so the
-    compile_commands.json flags and the sdkconfig are the settled ones."""
-    if not pch_enabled():
-        # Self-cleaning escape hatch: drop any previously built .gch
-        pch.discard_pch(CORE.relative_build_path("build"))
-        pch.pch_disabled_degraded()
-        return
-    sdkconfig_path = CORE.relative_build_path(f"sdkconfig.{CORE.name}")
-    try:
-        sdkconfig = sdkconfig_path.read_text(encoding="utf-8")
-    except OSError as err:
-        # Fail closed: the sdkconfig is the .sum's only config identity for
-        # sdkconfig.h-only options; a stand-in marker would collide
-        _LOGGER.warning(
-            "Could not read %s; compiling without the pch: %s", sdkconfig_path, err
-        )
-        pch.discard_pch(CORE.relative_build_path("build"))
-        pch.pch_degraded(f"sdkconfig unreadable: {err}")
-        return
-    pch.prepare_pch(
-        CORE.relative_build_path("build"),
-        PCH_DEFAULT_HEADERS,
-        (
-            str(idf_version()),
-            CORE.cpp_standard or "",
-            sdkconfig,
-            *get_project_compile_flags(),
-            *get_project_cxx_compile_flags(),
-        ),
-    )
+"""
 
 
 def write_project(
@@ -349,14 +301,6 @@ def write_project(
         get_component_cmakelists(),
     )
 
-    if pch_enabled():
-        write_file_if_changed(
-            CORE.relative_build_path("build", PCH_HEADER_NAME),
-            pch_header_text(PCH_DEFAULT_HEADERS),
-        )
-        # Consumers carry the -include; gate the ccache relaxation on it
-        mark_pch_emitted()
-
     # Snapshot the exclusion set so has_outdated_files() can trigger a
     # discovery reconfigure when it changes. Excluded components never
     # register in project_description.json, so re-including one (e.g. a

esphome/build_helpers/ccache.py

@@ -21,13 +21,12 @@ def _ccache_runs(ccache: str) -> bool:
     )
 
 
-def parse_enable_env(name: str, strict: bool = False) -> bool | None:
+def parse_enable_env(name: str) -> bool | None:
     """Strictly parse an on/off environment knob; None when unset or invalid.
 
     ``bool(str)`` truthiness would flip ``no``/``off`` to enabled, so only
     1/true/yes/on and 0/false/no/off count; anything else warns and reads
-    as unset so the caller's default policy applies — or raises when
-    ``strict`` (a typo must not silently disable a CI gate).
+    as unset so the caller's default policy applies.
     """
     raw = os.environ.get(name)
     if raw is None:
@@ -40,10 +39,6 @@ def parse_enable_env(name: str, strict: bool = False) -> bool | None:
         return True
     if lowered in FALSY_ENV_STRINGS:
         return False
-    if strict:
-        from esphome.core import EsphomeError
-
-        raise EsphomeError(f"Unrecognized {name}={raw!r}; use 1 or 0")
     _LOGGER.warning("Ignoring unrecognized %s=%r; use 1 or 0", name, raw)
     return None
 
@@ -92,19 +87,6 @@ def ccache_defaults_env(cache_dir: Path) -> dict[str, str]:
         "CCACHE_DIR": str(cache_dir),
         "CCACHE_NOHASHDIR": "true",
         "CCACHE_DEPEND": "1",
-        # A user value wins via the filter below
-        "CCACHE_BASEDIR": effective_ccache_basedir(),
+        "CCACHE_BASEDIR": str(Path(CORE.build_path).resolve()),
     }
     return {k: v for k, v in defaults.items() if k not in os.environ}
-
-
-def effective_ccache_basedir() -> str:
-    """The prefix ccache rewrites out of hashed paths: a user CCACHE_BASEDIR
-    wins, else the resolved build path (matching ccache_defaults_env)."""
-    from esphome.core import CORE
-
-    raw = os.environ.get("CCACHE_BASEDIR")
-    if raw is not None and Path(raw).is_absolute() and len(Path(raw).parts) > 1:
-        return raw
-    # Unset or degenerate ("", "/", relative): fall back to the build path
-    return str(Path(CORE.build_path).resolve())

esphome/build_helpers/idedata.py

@@ -11,7 +11,6 @@ consumers (IDE integration, clang-tidy) expect:
 
 from __future__ import annotations
 
-from collections.abc import Callable
 import json
 import logging
 import os
@@ -22,8 +21,6 @@ import subprocess
 from esphome.core import EsphomeError
 from esphome.helpers import write_file
 
-_LOGGER = logging.getLogger(__name__)
-
 # Everything idedata generation may raise after a successful link; idedata
 # is a bonus artifact, so consumers warn instead of failing the build
 IDEDATA_BEST_EFFORT_ERRORS = (
@@ -34,36 +31,13 @@ IDEDATA_BEST_EFFORT_ERRORS = (
     ValueError,
 )
 
+_LOGGER = logging.getLogger(__name__)
 
-def warn_if_idedata_missing(get_idedata: Callable[[], dict | None]) -> None:
-    """Run an idedata generator, downgrading any failure to a warning.
-
-    Shared by the native backends: the firmware already built, so a missing
-    or broken idedata must not fail a successful build.
-    """
-    try:
-        if get_idedata() is None:
-            _LOGGER.warning("No idedata was generated for this build")
-    except IDEDATA_BEST_EFFORT_ERRORS as err:
-        _LOGGER.warning(
-            "Could not generate idedata: %s (IDE, clang-tidy, and "
-            "memory-analysis data will be unavailable for this build)",
-            err,
-        )
-        if isinstance(err, (EsphomeError, OSError)):
-            # Routine environmental failures keep the detail at debug
-            _LOGGER.debug("Idedata failure detail", exc_info=True)
-        else:
-            # LookupError/ValueError/RuntimeError smell like a parsing bug;
-            # a permanently masked traceback would hide it on every build
-            _LOGGER.warning("Idedata failure detail", exc_info=True)
-
-
-# C++ translation-unit suffixes.
-CXX_SOURCE_SUFFIXES = (".cpp", ".cc", ".cxx")
+# C++ translation-unit suffixes used to identify ESPHome source files.
+_CXX_SUFFIXES = (".cpp", ".cc")
 # Suffixes of input/output files that appear bare on the command line (and so
 # must not be mistaken for compiler flags).
-_INPUT_FILE_SUFFIXES = (*CXX_SOURCE_SUFFIXES, ".c", ".o", ".S", ".s")
+_INPUT_FILE_SUFFIXES = (*_CXX_SUFFIXES, ".c", ".o", ".S", ".s")
 # Path marker identifying an ESPHome source translation unit.
 _ESPHOME_SRC_MARKER = "/src/esphome/"
 
@@ -72,11 +46,11 @@ def _is_esphome_src(file: str) -> bool:
     """Whether ``file`` is an ESPHome C++ translation unit; normalized to
     ``/`` first since Windows compile DBs use backslashes."""
     return _ESPHOME_SRC_MARKER in file.replace("\\", "/") and file.endswith(
-        CXX_SOURCE_SUFFIXES
+        _CXX_SUFFIXES
     )
 
 
-def split_command(command: str) -> list[str]:
+def _split_command(command: str) -> list[str]:
     r"""Tokenize a compile_commands.json / response-file command string.
 
     On Windows, tokenize per Windows ``argv`` rules via ``CommandLineToArgvW``.
@@ -112,7 +86,7 @@ def split_command(command: str) -> list[str]:
         ctypes.windll.kernel32.LocalFree(argv)
 
 
-def expand_response_files(tokens: list[str], directory: Path) -> list[str]:
+def _expand_response_files(tokens: list[str], directory: Path) -> list[str]:
     """Inline any ``@response-file`` arguments (paths relative to ``directory``).
 
     GCC response files embed flags that must be expanded so GCC-only flags
@@ -127,8 +101,8 @@ def expand_response_files(tokens: list[str], directory: Path) -> list[str]:
                 rf = directory / rf
             try:
                 out.extend(
-                    expand_response_files(
-                        split_command(rf.read_text(encoding="utf-8")), directory
+                    _expand_response_files(
+                        _split_command(rf.read_text(encoding="utf-8")), directory
                     )
                 )
                 continue
@@ -147,7 +121,7 @@ def _pick_entry(entries: list[dict]) -> dict:
         if _is_esphome_src(entry["file"]):
             return entry
     for entry in entries:
-        if entry["file"].endswith(CXX_SOURCE_SUFFIXES):
+        if entry["file"].endswith(_CXX_SUFFIXES):
             return entry
     raise ValueError("no C++ translation unit found in compile_commands.json")
 
@@ -157,25 +131,16 @@ def _pick_entry(entries: list[dict]) -> dict:
 _LAUNCHER_STEMS = frozenset({"ccache", "sccache", "distcc", "icecc", "buildcache"})
 
 
-def is_launcher(token: str) -> bool:
+def _is_launcher(token: str) -> bool:
     return Path(token).stem.lower() in _LAUNCHER_STEMS
 
 
-def is_joined_include(tok: str) -> bool:
-    """The joined ``-includefoo.h`` spelling; excludes clang's -include-pch."""
-    return (
-        tok.startswith("-include")
-        and tok != "-include"
-        and not tok.startswith("-include-")
-    )
-
-
 def parse_entry(
     entry: dict, launcher: str | None = None
 ) -> tuple[str, list[str], list[str], list[str]]:
     """Parse one compile_commands entry -> (cxx_path, defines, includes, cxx_flags)."""
     directory = Path(entry["directory"])
-    tokens = expand_response_files(split_command(entry["command"]), directory)
+    tokens = _expand_response_files(_split_command(entry["command"]), directory)
 
     def _include(raw: str) -> str:
         # Resolve against the entry's ``directory`` so cached idedata works
@@ -191,7 +156,7 @@ def parse_entry(
     if not tokens:
         # An empty command, or one that was only the launcher; fail by name
         raise ValueError(f"empty compile command for {entry.get('file')}")
-    if is_launcher(tokens[0]) and len(tokens) > 1 and not tokens[1].startswith("-"):
+    if _is_launcher(tokens[0]) and len(tokens) > 1 and not tokens[1].startswith("-"):
         # Stale DB built with a launcher this run no longer configures; the
         # real compiler is the next token
         _LOGGER.warning("Stripping unconfigured launcher %s", tokens[0])
@@ -204,23 +169,11 @@ def parse_entry(
     defines: list[str] = []
     includes: list[str] = []
     cxx_flags: list[str] = []
-    unresolved_force_includes: list[str] = []
 
     it = iter(tokens[1:])
     for tok in it:
         if tok in ("-c", "-o"):
             next(it, None)  # drop the flag and its argument (input/output)
-        elif tok == "-include" or is_joined_include(tok):
-            # Re-anchor only names next to the compile (the pch); a name
-            # meant for the -I chain must stay untouched
-            raw = next(it, "") if tok == "-include" else tok[len("-include") :]
-            if not raw:
-                _LOGGER.warning("Dropping -include with no argument")
-            elif Path(resolved := _include(raw)).is_file():
-                cxx_flags.extend(("-include", resolved))
-            else:
-                unresolved_force_includes.append(raw)
-                cxx_flags.extend(("-include", raw))
         elif tok.startswith("-D"):
             # ``.strip()`` handles tokens like ``-D CONFIGURED=1`` (a single
             # quoted arg with a space after -D) that some flags arrive as.
@@ -239,14 +192,6 @@ def parse_entry(
             pass  # input/output files
         else:
             cxx_flags.append(tok)
-    for raw in unresolved_force_includes:
-        # A deleted build artifact would otherwise surface only downstream
-        if not any((Path(inc) / raw).is_file() for inc in includes):
-            _LOGGER.warning(
-                "-include %s found neither next to the compile nor on the "
-                "include path; cached idedata may not resolve it",
-                raw,
-            )
     return cxx_path, defines, includes, cxx_flags
 
 
@@ -311,7 +256,7 @@ def _cache_usable(cached: object) -> bool:
     if not isinstance(cached, dict) or "cc_path" not in cached:
         return False
     cxx_path = cached.get("cxx_path")
-    if not isinstance(cxx_path, str) or is_launcher(cxx_path):
+    if not isinstance(cxx_path, str) or _is_launcher(cxx_path):
         return False
     includes = cached.get("includes")
     return isinstance(includes, dict) and isinstance(includes.get("build"), list)
@@ -359,7 +304,7 @@ def load_or_build_idedata(
 def reject_launcher_compiler(cxx_path: str) -> None:
     """Reject a compile DB naming a launcher (ccache) as the compiler; it
     must never be probed, cached, or consumed."""
-    if is_launcher(cxx_path):
+    if _is_launcher(cxx_path):
         raise EsphomeError(
             f"compile_commands.json names the launcher {cxx_path} as the "
             "compiler; the compile database is unusable"

esphome/build_helpers/pch.py

@@ -1,603 +0,0 @@
-"""Shared precompiled-header policy for the build backends.
-
-The prefix either mirrors the TUs' own force-includes (ESP8266) or is a
-curated core-header set (ESP-IDF). ``esphome: includes:`` sources receive
-it too; Arduino.h visibility there is intended (esphome#8693).
-"""
-
-from __future__ import annotations
-
-from collections.abc import Callable, Iterable
-from contextlib import suppress
-from dataclasses import dataclass
-import hashlib
-import json
-import logging
-import os
-from pathlib import Path
-import posixpath
-import re
-import stat
-import subprocess
-
-from esphome.build_helpers.ccache import effective_ccache_basedir, parse_enable_env
-from esphome.build_helpers.idedata import (
-    CXX_SOURCE_SUFFIXES,
-    expand_response_files,
-    is_launcher,
-    split_command,
-)
-
-_DOMAIN = "pch"
-
-
-@dataclass
-class _PCHData:
-    emitted: bool = False
-
-
-def _pch_data() -> _PCHData:
-    from esphome.core import CORE
-
-    if _DOMAIN not in CORE.data:
-        CORE.data[_DOMAIN] = _PCHData()
-    return CORE.data[_DOMAIN]
-
-
-def mark_pch_emitted() -> None:
-    """Record that this build's consumers reference the pch."""
-    _pch_data().emitted = True
-
-
-_LOGGER = logging.getLogger(__name__)
-
-# The header and its .gch/.sum sidecars live in the build directory.
-PCH_HEADER_NAME = "esphome_pch.h"
-
-# Every artifact the pch machinery can leave behind, for cleanup.
-PCH_ARTIFACT_NAMES = (
-    PCH_HEADER_NAME,
-    f"{PCH_HEADER_NAME}.gch",
-    f"{PCH_HEADER_NAME}.gch.sum",
-    f"{PCH_HEADER_NAME}.gch.failed",
-)
-
-# The core defines header every backend anchors its prefix on.
-PCH_CORE_HEADER = "esphome/core/defines.h"
-
-# Guarded curated-prefix wrapper for PlatformIO backends without framework
-# force-includes (host, esp32); folded by the pch script via build_src_flags.
-PCH_PREFIX_HEADER = "esphome/core/pch_prefix.h"
-
-# Prefix-header contents for backends that inject a curated set (rather
-# than mirroring the TUs' own force-includes), defines.h first so USE_*
-# macros exist for the rest. Deliberately hard-coded: frequency-derived
-# sets measured no better and kept selecting headers that cannot compile
-# standalone (X-macro, platform-variant). Every entry must be safe to
-# include first in an empty TU. Caveat: application.h/automation.h become
-# ambiently visible, so a TU missing those #includes still builds on such
-# backends; ESPHOME_PCH_ENABLE=0 restores the strict view.
-PCH_DEFAULT_HEADERS = (
-    PCH_CORE_HEADER,
-    "esphome/core/component.h",
-    "esphome/core/helpers.h",
-    "esphome/core/log.h",
-    "esphome/core/application.h",
-    "esphome/core/automation.h",
-)
-
-# ccache cannot hash through a .gch; CCACHE_PCH_EXTSUM makes it hash the
-# .sum sidecar instead of the .gch bytes, which are not reproducible.
-# Keep in sync with the literals in platformio/pch.py.script.
-_CCACHE_PCH_ENV = {
-    "CCACHE_SLOPPINESS": "pch_defines,time_macros",
-    "CCACHE_PCH_EXTSUM": "true",
-}
-
-# Both include forms: an angle include resolving under src/ must enter the
-# digest too; ones that do not resolve simply end the walk
-# Compiler failures that clear on their own must not latch the .failed marker
-_TRANSIENT_ERRORS = ("No space left", "Cannot allocate", "Resource temporarily")
-
-_INCLUDE_RE = re.compile(rb'^\s*#\s*include\s+["<]([^">]+)[">]', re.MULTILINE)
-
-
-def pch_enabled() -> bool:
-    """Precompiled-header knob: default on, ``ESPHOME_PCH_ENABLE=0`` opts out."""
-    return parse_enable_env("ESPHOME_PCH_ENABLE") is not False
-
-
-def pch_strict() -> bool:
-    """CI knob: ``ESPHOME_PCH_STRICT=1`` turns pch degrade paths fatal.
-
-    A set-but-unrecognized value raises: a typo must not silently turn
-    the gate into a no-op that proves nothing.
-    """
-    return parse_enable_env("ESPHOME_PCH_STRICT", strict=True) is True
-
-
-def pch_degraded(reason: str) -> None:
-    """Every degrade path funnels through here; strict mode raises."""
-    if pch_strict():
-        from esphome.core import EsphomeError
-
-        raise EsphomeError(f"ESPHOME_PCH_STRICT: {reason}")
-
-
-def pch_disabled_degraded() -> None:
-    """Strict CI must not read "no pch at all" as success."""
-    pch_degraded("pch disabled by ESPHOME_PCH_ENABLE")
-
-
-def pch_probe_tail(source: str = "-") -> list[str]:
-    """The syntax-only compile shared by the probe and its baseline."""
-    return ["-fsyntax-only", "-x", "c++", source]
-
-
-def pch_probe_args(header: str, source: str = "-") -> list[str]:
-    """Flags that load-check a built .gch via a syntax-only compile.
-
-    Rejection must be a nonzero exit (never just a wording match), so the
-    invalid-pch class is always escalated. ``source`` defaults to stdin
-    (host independent); the ninja probe edge passes a real file.
-    """
-    return [
-        "-Winvalid-pch",
-        "-Werror=invalid-pch",
-        "-include",
-        header,
-        *pch_probe_tail(source),
-    ]
-
-
-def pch_consumer_escalation() -> str:
-    """Consumer-side invalid-pch flag: strict reds the build on rejection
-    (per-process, so the probe alone cannot prove the consumers)."""
-    return "-Werror=invalid-pch" if pch_strict() else "-Wno-error=invalid-pch"
-
-
-def pch_cmake_consumer(target: str, sources_var: str) -> str:
-    """Emit the CMake block making ``target``'s C++ sources consume the
-    pch; empty when disabled. OBJECT_DEPENDS is on the header, not the
-    .gch (pch-baked headers drop out of TU depfiles); the -include stays
-    relative — an absolute path would poison ccache keys."""
-    if not pch_enabled():
-        return ""
-    escalation = pch_consumer_escalation()
-    return f"""
-# ESPHome precompiled header (see esphome/build_helpers/pch.py).
-# The touch keeps OBJECT_DEPENDS satisfiable when the build system itself
-# wiped the build dir after the header was written (west --pristine)
-if(NOT EXISTS "${{CMAKE_BINARY_DIR}}/{PCH_HEADER_NAME}")
-  file(TOUCH "${{CMAKE_BINARY_DIR}}/{PCH_HEADER_NAME}")
-endif()
-target_compile_options({target} PRIVATE
-    "$<$<COMPILE_LANGUAGE:CXX>:-Winvalid-pch>"
-    "$<$<COMPILE_LANGUAGE:CXX>:{escalation}>"
-    "$<$<COMPILE_LANGUAGE:CXX>:-include>"
-    "$<$<COMPILE_LANGUAGE:CXX>:{PCH_HEADER_NAME}>"
-)
-set_source_files_properties({sources_var} PROPERTIES
-    OBJECT_DEPENDS "${{CMAKE_BINARY_DIR}}/{PCH_HEADER_NAME}")
-"""
-
-
-def ccache_pch_env() -> dict[str, str]:
-    """Settings ccache needs to cache compiles that consume the .gch;
-    empty unless this build actually emitted one. User-set values win.
-    Native backends export these process-wide; only time_macros affects
-    non-pch TUs."""
-    if not (pch_enabled() and _pch_data().emitted):
-        return {}
-    extsum = os.environ.get("CCACHE_PCH_EXTSUM")
-    if extsum is not None and extsum.strip().lower() not in ("1", "true", "yes", "on"):
-        # ccache then hashes the non-reproducible .gch bytes: permanent misses
-        _LOGGER.warning("CCACHE_PCH_EXTSUM=%s disables pch caching", extsum)
-    env = {k: v for k, v in _CCACHE_PCH_ENV.items() if k not in os.environ}
-    user_sloppiness = os.environ.get("CCACHE_SLOPPINESS")
-    if user_sloppiness is not None and (
-        missing := [
-            t
-            for t in ("pch_defines", "time_macros")
-            if t not in {tok.strip() for tok in user_sloppiness.split(",")}
-        ]
-    ):
-        # Without these ccache declines every pch-consuming compile
-        env["CCACHE_SLOPPINESS"] = ",".join((user_sloppiness, *missing))
-        _LOGGER.warning(
-            "Adding %s to CCACHE_SLOPPINESS so ccache can cache compiles "
-            "that use the precompiled header",
-            ",".join(missing),
-        )
-    return env
-
-
-def guarded_prepare(build_dir: Path, prepare: Callable[[], None]) -> None:
-    """Run a backend's pch preparation; an optional speedup must never
-    abort the build. Strict is read first so its own knob error cannot
-    mask the real failure; discard_pch raises if a stale .gch survives;
-    the header is ensured so OBJECT_DEPENDS stays satisfiable."""
-    try:
-        prepare()
-    except Exception:  # noqa: BLE001  # pylint: disable=broad-exception-caught
-        strict = pch_strict()
-        discard_pch(build_dir)
-        if strict:
-            raise
-        header = build_dir / PCH_HEADER_NAME
-        if not header.exists():
-            try:
-                header.touch()
-            except OSError as err:
-                # The coming OBJECT_DEPENDS error would hide the real cause
-                _LOGGER.warning("Could not create the pch placeholder: %s", err)
-        _LOGGER.warning(
-            "Precompiled header setup failed; compiling without it", exc_info=True
-        )
-
-
-def pch_extra_scripts() -> list[str]:
-    """The extra_scripts entries a PlatformIO platform registers for the
-    pch; empty when disabled (the script itself has no enable check)."""
-    if not pch_enabled():
-        pch_disabled_degraded()
-        return []
-    return ["post:pch.py"]
-
-
-def pch_header_text(include_headers: Iterable[str]) -> str:
-    """The prefix-header source: exactly these includes, in order."""
-    return "".join(f'#include "{name}"\n' for name in include_headers)
-
-
-def _resolves(path: Path) -> bool:
-    """False when missing; other stat failures propagate (identity unknown,
-    unlike is_file(), which would silently drop the header)."""
-    try:
-        return stat.S_ISREG(path.stat().st_mode)
-    except (FileNotFoundError, NotADirectoryError):
-        return False
-
-
-def _include_closure(src_dir: Path, roots: Iterable[str]) -> dict[str, bytes]:
-    """Include closure of ``roots``: src-relative name -> contents.
-
-    Resolution mirrors the compiler (includer's dir, then src root); names
-    outside ``src_dir`` end the walk and are versioned by the caller. No
-    #ifdef evaluation: over-approximating is the safe direction.
-    """
-    seen: dict[str, bytes] = {}
-    stack: list[tuple[str, str]] = [(name, "") for name in roots]
-    while stack:
-        name, from_dir = stack.pop()
-        for candidate in (f"{from_dir}/{name}" if from_dir else name, name):
-            rel = posixpath.normpath(candidate)
-            if not rel.startswith("..") and _resolves(src_dir / rel):
-                break
-        else:
-            continue
-        if rel in seen:
-            continue
-        try:
-            data = (src_dir / rel).read_bytes()
-        except OSError as err:
-            # A marker would truncate the transitive walk; fail closed
-            _LOGGER.warning("Could not read %s for the pch checksum: %s", rel, err)
-            raise
-        seen[rel] = data
-        parent = posixpath.dirname(rel)
-        stack.extend(
-            # surrogateescape: a non-UTF-8 name just fails to resolve
-            (inc.decode(errors="surrogateescape"), parent)
-            for inc in _INCLUDE_RE.findall(data)
-        )
-    return seen
-
-
-def pch_checksum(
-    src_dir: Path, include_headers: Iterable[str], extra: Iterable[str]
-) -> str:
-    """Digest standing in for the .gch in ccache's hash: the include closure
-    of the prefix header plus caller-supplied identity strings (versioned
-    install paths, flags). Raises OSError when a header's identity cannot
-    be established at all; callers must then compile without a pch."""
-    digest = hashlib.sha256()
-    closure = _include_closure(src_dir, include_headers)
-    for name in sorted(closure):
-        digest.update(name.encode(errors="surrogateescape"))
-        digest.update(closure[name])
-        digest.update(b"\0")
-    for item in extra:
-        digest.update(item.encode(errors="surrogateescape"))
-        digest.update(b"\0")
-    return digest.hexdigest()
-
-
-# Tokens dropped when retargeting a TU's flags at the prefix header
-# (the pch compile must not touch depfiles)
-_PCH_STRIP_FLAGS_WITH_ARG = frozenset({"-o", "-c", "-MT", "-MF", "-MQ"})
-_PCH_STRIP_FLAGS = frozenset({"-MD", "-MMD", "-MP", "-MM", "-M"})
-
-
-def pch_compile_command(
-    build_dir: Path, header: Path, gch: Path
-) -> tuple[list[str], Path] | None:
-    """The exact src C++ flags from compile_commands.json retargeted at the
-    header, with the directory they resolve against (relative -I paths must
-    be expanded and executed from the same root); None (logged) when no
-    configured C++ TU is available yet."""
-    from esphome.core import CORE
-
-    try:
-        entries = json.loads(
-            (build_dir / "compile_commands.json").read_text(encoding="utf-8")
-        )
-    except (OSError, json.JSONDecodeError) as err:
-        # Configure already succeeded, so an unusable DB is a real anomaly
-        _LOGGER.warning("No usable compile database, skipping pch: %s", err)
-        return None
-    if not isinstance(entries, list):
-        _LOGGER.warning("Malformed compile database, skipping pch")
-        return None
-    # CMake may spell paths through a symlink differently than CORE does
-    # (macOS /tmp vs /private/tmp), so compare resolved paths
-    src_root = Path(CORE.relative_src_path()).resolve()
-    entry = next(
-        (
-            e
-            for e in entries
-            if isinstance(e, dict)
-            and isinstance(e.get("file"), str)
-            and e["file"].endswith(CXX_SOURCE_SUFFIXES)
-            and Path(e["file"]).resolve().is_relative_to(src_root)
-        ),
-        None,
-    )
-    if entry is None:
-        _LOGGER.warning("No src C++ entry in the compile database, skipping pch")
-        return None
-    directory = entry.get("directory")
-    cmd_dir = Path(directory) if isinstance(directory, str) and directory else build_dir
-    command = entry.get("command")
-    tokens = expand_response_files(
-        split_command(command if isinstance(command, str) else ""), cmd_dir
-    )
-    # A DB recorded with ccache enabled prefixes the compiler with the
-    # launcher; the .gch must be compiled directly
-    if tokens and is_launcher(tokens[0]):
-        tokens = tokens[1:]
-    if not tokens:
-        # "arguments"-style or empty entries must skip, not spawn "-x ..."
-        _LOGGER.warning("Compile database entry has no usable command, skipping pch")
-        return None
-    args: list[str] = []
-    arg_it = iter(tokens)
-    for tok in arg_it:
-        if tok in _PCH_STRIP_FLAGS_WITH_ARG:
-            next(arg_it, None)
-            continue
-        if tok in _PCH_STRIP_FLAGS:
-            continue
-        if tok == "-include":
-            # Drop only the injected prefix; user force-includes must reach
-            # the .gch compile or GCC rejects it over the macro mismatch
-            inc = next(arg_it, "")
-            if not inc.endswith(PCH_HEADER_NAME):
-                args.extend(("-include", inc))
-            continue
-        args.append(tok)
-    return [*args, "-x", "c++-header", "-c", str(header), "-o", str(gch)], cmd_dir
-
-
-def _log_pch_in_use() -> None:
-    # The only place a user can discover the knob; emitted only once a
-    # .gch is actually fresh or being built
-    _LOGGER.info(
-        "Compiling with a precompiled header (set ESPHOME_PCH_ENABLE=0 to disable)"
-    )
-
-
-def _read_stamp(path: Path) -> str:
-    """A corrupt sidecar must read as stale, not kill the pch forever."""
-    try:
-        return path.read_text(encoding="utf-8").strip()
-    except (OSError, UnicodeDecodeError):
-        return ""
-
-
-def discard_pch(build_dir: Path) -> None:
-    """Remove the pch sidecars so a stale .gch is never consumed.
-
-    Bumps the header only when a .gch was actually removed: TUs compiled
-    against it have incomplete depfiles, while a repeat failure with no
-    .gch must not force a full rebuild every build. A .gch that survives
-    an unlink failure would be consumed silently (wrong output, not a
-    slow build), so that raises.
-    """
-    header = build_dir / PCH_HEADER_NAME
-    gch = Path(f"{header}.gch")
-    had_gch = gch.is_file()
-    errors = []
-    for sidecar in (gch, Path(f"{gch}.sum")):
-        try:
-            sidecar.unlink(missing_ok=True)
-        except OSError as err:
-            if sidecar.is_file():
-                from esphome.core import EsphomeError
-
-                raise EsphomeError(
-                    f"Could not discard the stale precompiled header: {err}"
-                ) from err
-            errors.append(err)
-    for err in errors:
-        _LOGGER.warning("Could not discard the pch sidecars: %s", err)
-    if had_gch and header.is_file():
-        with suppress(OSError):
-            os.utime(header)
-
-
-def prepare_pch(
-    build_dir: Path, include_headers: tuple[str, ...], extra: Iterable[str]
-) -> None:
-    """Compile ``build_dir``'s .gch from compile_commands.json flags and
-    write its ccache .sum.
-
-    The .sum doubles as the freshness stamp and folds in the compile
-    command, so a flag-only change rebuilds the .gch; ``extra`` carries
-    backend identity (framework version, sdkconfig, ...). A failed
-    compile falls back to the plain header include.
-    """
-    from esphome.core import CORE
-
-    header = build_dir / PCH_HEADER_NAME
-    gch = Path(f"{header}.gch")
-    sum_path = Path(f"{gch}.sum")
-    cmd_and_dir = pch_compile_command(build_dir, header, gch)
-    if cmd_and_dir is None:
-        # Freshness cannot be validated; a leftover .gch must not be consumed
-        discard_pch(build_dir)
-        pch_degraded("no usable compile command")
-        return
-    cmd, cmd_dir = cmd_and_dir
-    # Strip like ccache's rewriting (user CCACHE_BASEDIR wins); the raw
-    # build path covers unresolved (symlinked) spellings
-    cmd_id = (
-        " ".join(cmd)
-        .replace(effective_ccache_basedir(), "")
-        .replace(str(CORE.build_path), "")
-    )
-    try:
-        checksum = pch_checksum(
-            CORE.relative_src_path(),
-            include_headers,
-            (
-                # The closure is sorted, so root order only enters via the text
-                pch_header_text(include_headers),
-                *extra,
-                cmd_id,
-            ),
-        )
-    except (OSError, UnicodeError) as err:
-        # Identity unknown: a stale cache entry must never be served
-        _LOGGER.warning(
-            "Could not establish the pch identity; compiling without it: %s", err
-        )
-        discard_pch(build_dir)
-        pch_degraded(f"identity unknown: {err}")
-        return
-    failed_marker = Path(f"{gch}.failed")
-
-    def _run(
-        run_cmd: list[str], what: str, stdin: str | None = None
-    ) -> subprocess.CompletedProcess | None:
-        """Spawn one pch tool step; environmental failures discard and
-        degrade (None): spawn/IO/timeout errors and signal kills never
-        latch the marker."""
-        try:
-            proc = subprocess.run(
-                run_cmd,
-                cwd=cmd_dir,
-                # C locale keeps diagnostics matchable by _TRANSIENT_ERRORS
-                env={**os.environ, "LC_ALL": "C"},
-                input=stdin,
-                capture_output=True,
-                text=True,
-                check=False,
-                timeout=300,
-            )
-        except (OSError, subprocess.SubprocessError) as err:
-            _LOGGER.warning("Precompiled header %s did not run: %s", what, err)
-            discard_pch(build_dir)
-            pch_degraded(f"{what} did not run: {err}")
-            return None
-        if proc.returncode < 0:
-            # Killed by a signal (OOM, ^C): environmental, do not latch
-            _LOGGER.warning(
-                "Precompiled header %s was killed (signal %d); retrying next build",
-                what,
-                -proc.returncode,
-            )
-            discard_pch(build_dir)
-            pch_degraded(f"{what} killed by signal {-proc.returncode}")
-            return None
-        return proc
-
-    def _fail(error: str, reason: str, latch: bool) -> None:
-        """Discard and degrade; deterministic failures latch when asked."""
-        _LOGGER.warning(
-            "Precompiled header failed; compiling without it: %s", error[:400]
-        )
-        # Latching paths keep the full compiler output recoverable
-        _LOGGER.debug("Full pch output: %s", error)
-        discard_pch(build_dir)
-        if latch and not any(m in error for m in _TRANSIENT_ERRORS):
-            # Skip retries until a header/flag/backend-identity/command change
-            failed_marker.write_text(checksum + "\n", encoding="utf-8")
-            os.utime(header)
-        pch_degraded(f"{reason}: {error[:200]}")
-
-    def _probe(latch: bool = True) -> None:
-        """Load-check the built .gch: some toolchains build one they then
-        refuse to load (per-process ASLR). Dep flags are already stripped
-        from cmd, so no -MF is needed; cmd ends with the fixed
-        "-x c++-header -c -o" tail. A cached-header rejection may not
-        reproduce (per-process), so that caller passes latch=False."""
-        if cmd[-6:-4] != ["-x", "c++-header"]:
-            # The slice below depends on pch_compile_command's fixed tail
-            _LOGGER.warning("Unexpected pch command shape: %s", cmd[-6:])
-            discard_pch(build_dir)
-            pch_degraded("unexpected pch command shape")
-            return
-        base = cmd[:-6]
-        probe = _run([*base, *pch_probe_args(str(header))], "probe", stdin="")
-        if probe is None:
-            return
-        if probe.returncode != 0:
-            # Disambiguate: only blame the pch when the same compile passes
-            # without it; a failing baseline is its own (latchable) problem
-            baseline = _run([*base, *pch_probe_tail()], "probe baseline", stdin="")
-            if baseline is None:
-                return
-            if baseline.returncode == 0:
-                error = probe.stderr.strip() or f"exit code {probe.returncode}"
-                _fail(error, "toolchain cannot load the pch", latch=latch)
-            else:
-                error = baseline.stderr.strip() or f"exit code {baseline.returncode}"
-                _fail(error, "probe cannot run at all", latch=latch)
-
-    if gch.is_file() and _read_stamp(sum_path) == checksum:
-        _log_pch_in_use()
-        if pch_strict():
-            # Rejection is per-process, so a cached .gch must re-prove
-            # loadability for the strict gate (CI-only cost); no latch,
-            # since the rejection may not reproduce either
-            _probe(latch=False)
-        return
-    if _read_stamp(failed_marker) == checksum:
-        _LOGGER.info(
-            "Precompiled header disabled after an earlier failure; delete %s to retry",
-            failed_marker,
-        )
-        pch_degraded("earlier failure latched")
-        return
-    _log_pch_in_use()
-    result = _run(cmd, "compile")
-    if result is None:
-        return
-    error = None
-    if result.returncode != 0:
-        error = result.stderr.strip() or f"exit code {result.returncode}"
-    elif not gch.is_file():
-        error = "compiler produced no .gch"
-    if error is not None:
-        _fail(error, "compile failed", latch=True)
-        return
-    _probe()
-    if not gch.is_file():
-        # The probe discarded a rejected or unrunnable .gch
-        return
-    failed_marker.unlink(missing_ok=True)
-    sum_path.write_text(checksum + "\n", encoding="utf-8")
-    # Consumers depend on the header (depfiles cannot see through a .gch);
-    # bump it so users of the previous .gch recompile
-    os.utime(header)

esphome/components/anova/anova.cpp

@@ -13,7 +13,7 @@ void Anova::dump_config() { LOG_CLIMATE("", "Anova BLE Cooker", this); }
 
 void Anova::setup() {
   this->codec_ = make_unique<AnovaCodec>();
-  this->poll_step_ = PollStep::IDLE;
+  this->current_request_ = 0;
 }
 
 void Anova::loop() {
@@ -22,15 +22,6 @@ void Anova::loop() {
   this->disable_loop();
 }
 
-void Anova::write_request_(AnovaPacket *pkt) {
-  auto status =
-      esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
-                               pkt->length, pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-  if (status) {
-    ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str(), status);
-  }
-}
-
 void Anova::control(const ClimateCall &call) {
   auto mode_val = call.get_mode();
   if (mode_val.has_value()) {
@@ -47,11 +38,22 @@ void Anova::control(const ClimateCall &call) {
         ESP_LOGW(TAG, "Unsupported mode: %d", mode);
         return;
     }
-    this->write_request_(pkt);
+    auto status =
+        esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
+                                 pkt->length, pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
+    if (status) {
+      ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str(), status);
+    }
   }
   auto target_temp = call.get_target_temperature();
   if (target_temp.has_value()) {
-    this->write_request_(this->codec_->get_set_target_temp_request(*target_temp));
+    auto *pkt = this->codec_->get_set_target_temp_request(*target_temp);
+    auto status =
+        esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
+                                 pkt->length, pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
+    if (status) {
+      ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str(), status);
+    }
   }
 }
 
@@ -60,7 +62,6 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
     case ESP_GATTC_DISCONNECT_EVT: {
       this->current_temperature = NAN;
       this->target_temperature = NAN;
-      this->poll_step_ = PollStep::IDLE;
       this->publish_state();
       break;
     }
@@ -82,8 +83,8 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
     }
     case ESP_GATTC_REG_FOR_NOTIFY_EVT: {
       this->node_state = espbt::ClientState::ESTABLISHED;
-      this->poll_step_ = PollStep::IDLE;
-      this->update();  // begin the first poll cycle immediately
+      this->current_request_ = 0;
+      this->update();
       break;
     }
     case ESP_GATTC_NOTIFY_EVT: {
@@ -100,30 +101,33 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
         this->mode = this->codec_->running_ ? climate::CLIMATE_MODE_HEAT : climate::CLIMATE_MODE_OFF;
       }
       if (this->codec_->has_unit()) {
-        ESP_LOGD(TAG, "Anova units is %s", (this->codec_->unit_ == 'f') ? "fahrenheit" : "celsius");
+        this->fahrenheit_ = (this->codec_->unit_ == 'f');
+        ESP_LOGD(TAG, "Anova units is %s", this->fahrenheit_ ? "fahrenheit" : "celsius");
+        this->current_request_++;
       }
       this->publish_state();
 
-      // Advance the poll cycle to its next request based on the reply we got.
-      switch (this->poll_step_) {
-        case PollStep::SET_UNIT:
-          this->poll_step_ = PollStep::STATUS;
-          this->write_request_(this->codec_->get_read_device_status_request());
-          break;
-        case PollStep::STATUS:
-          this->poll_step_ = PollStep::TARGET;
-          this->write_request_(this->codec_->get_read_target_temp_request());
-          break;
-        case PollStep::TARGET:
-          this->poll_step_ = PollStep::CURRENT;
-          this->write_request_(this->codec_->get_read_current_temp_request());
-          break;
-        case PollStep::CURRENT:
-          this->poll_step_ = PollStep::IDLE;  // full cycle complete
-          break;
-        default:
-          // A reply to an ad-hoc control() write, outside a managed cycle.
-          break;
+      if (this->current_request_ > 1) {
+        AnovaPacket *pkt = nullptr;
+        switch (this->current_request_++) {
+          case 2:
+            pkt = this->codec_->get_read_target_temp_request();
+            break;
+          case 3:
+            pkt = this->codec_->get_read_current_temp_request();
+            break;
+          default:
+            this->current_request_ = 1;
+            break;
+        }
+        if (pkt != nullptr) {
+          auto status =
+              esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
+                                       pkt->length, pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
+          if (status) {
+            ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str(), status);
+          }
+        }
       }
       break;
     }
@@ -132,26 +136,27 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
   }
 }
 
-void Anova::set_unit_of_measurement(const char *unit) { this->want_fahrenheit_ = !strncmp(unit, "f", 1); }
+void Anova::set_unit_of_measurement(const char *unit) { this->fahrenheit_ = !strncmp(unit, "f", 1); }
 
 void Anova::update() {
   if (this->node_state != espbt::ClientState::ESTABLISHED)
     return;
-  if (this->poll_step_ != PollStep::IDLE) {
-    // The previous cycle never finished within a full polling interval -- a
-    // reply was missed or a write failed. Restart the cycle rather than stall;
-    // the polling interval itself acts as the timeout. A late reply from the
-    // abandoned cycle is harmless: state decoding happens on every notify
-    // regardless of step, and each notify sends at most one follow-up request.
-    ESP_LOGW(TAG, "[%s] Poll cycle incomplete (step %u); restarting cycle", this->parent_->address_str(),
-             static_cast<uint8_t>(this->poll_step_));
+
+  if (this->current_request_ < 2) {
+    AnovaPacket *pkt;
+    if (this->current_request_ == 0) {
+      pkt = this->codec_->get_set_unit_request(this->fahrenheit_ ? 'f' : 'c');
+    } else {
+      pkt = this->codec_->get_read_device_status_request();
+    }
+    auto status =
+        esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
+                                 pkt->length, pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
+    if (status) {
+      ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str(), status);
+    }
+    this->current_request_++;
   }
-  // Re-assert the configured unit at the start of every poll cycle, then fall
-  // through the status/temperature reads via the notification handler. Always
-  // command the configured unit (want_fahrenheit_) -- never the last value the
-  // device reported, or a drift to 'c' would lock itself in.
-  this->poll_step_ = PollStep::SET_UNIT;
-  this->write_request_(this->codec_->get_set_unit_request(this->want_fahrenheit_ ? 'f' : 'c'));
 }
 
 }  // namespace esphome::anova

esphome/components/anova/anova.h

@@ -37,20 +37,11 @@ class Anova final : public climate::Climate, public esphome::ble_client::BLEClie
   void set_unit_of_measurement(const char *unit);
 
  protected:
-  // A poll cycle re-asserts the configured unit, then reads device state.
-  // Re-asserting every cycle prevents the cooker from silently reverting to
-  // its default (Celsius); previously the unit was only set once on
-  // connection, so a drift persisted (and corrupted the F/C interpretation of
-  // subsequent readings) until the BLE link was re-established.
-  enum class PollStep : uint8_t { SET_UNIT, STATUS, TARGET, CURRENT, IDLE };
-
-  void write_request_(AnovaPacket *pkt);
-
   std::unique_ptr<AnovaCodec> codec_;
   void control(const climate::ClimateCall &call) override;
   uint16_t char_handle_;
-  bool want_fahrenheit_{true};  // configured target unit; never overwritten by device replies
-  PollStep poll_step_{PollStep::IDLE};
+  uint8_t current_request_;
+  bool fahrenheit_;
 };
 
 }  // namespace esphome::anova

esphome/components/api/api_connection.cpp

@@ -2255,7 +2255,12 @@ bool APIConnection::send_message_(uint32_t payload_size, uint16_t message_type,
   // Capacity reserved above, cannot fail
   (void) shared_buf.resize(write_start + payload_size);
   ProtoWriteBuffer buffer{&shared_buf, write_start};
-  encode_fn(msg, buffer PROTO_ENCODE_DEBUG_INIT(&shared_buf));
+  uint8_t *end = encode_fn(msg, buffer PROTO_ENCODE_DEBUG_INIT(&shared_buf));
+#ifdef ESPHOME_DEBUG_API
+  assert(end == shared_buf.data() + shared_buf.size());
+#else
+  (void) end;
+#endif
   return this->send_buffer(ProtoWriteBuffer{&shared_buf}, message_type);
 }
 // encode_to_buffer is defined inline in api_connection.h (ESPHOME_ALWAYS_INLINE)

esphome/components/api/api_connection.h

@@ -345,11 +345,7 @@ class APIConnection final : public APIServerConnectionBase {
   /// Returns false as soon as the TCP buffer is full. Marked nodiscard so we
   /// have no silent failures: every caller must handle (or log) a refusal.
   template<typename T> [[nodiscard]] bool send_message(const T &msg) {
-    if constexpr (T::ESTIMATED_SIZE == 0) {
-      return this->send_message_(0, T::MESSAGE_TYPE, &encode_msg_noop, &msg);
-    } else {
-      return this->send_message_(msg.calculate_size(), T::MESSAGE_TYPE, &proto_encode_msg<T>, &msg);
-    }
+    return this->send_message_(T::calc_size_msg(&msg), T::MESSAGE_TYPE, &T::encode_msg, &msg);
   }
 
   /// Clear the shared write buffer and reserve space for the first message.
@@ -405,16 +401,6 @@ class APIConnection final : public APIServerConnectionBase {
   void process_state_subscriptions_();
 #endif
 
-  // Size thunk — converts void* back to concrete type for direct calculate_size() call
-  template<typename T> static uint32_t calc_size(const void *msg) {
-    return static_cast<const T *>(msg)->calculate_size();
-  }
-
-  // Shared no-op encode thunk for empty messages (ESTIMATED_SIZE == 0)
-  static uint8_t *encode_msg_noop(const void *, ProtoWriteBuffer &buf PROTO_ENCODE_DEBUG_PARAM) {
-    return buf.get_pos();
-  }
-
   // Non-template buffer management for send_message
   bool send_message_(uint32_t payload_size, uint16_t message_type, MessageEncodeFn encode_fn, const void *msg);
 
@@ -433,11 +419,7 @@ class APIConnection final : public APIServerConnectionBase {
   // Hot paths (state/info) go through fill_and_encode_entity_state/info instead.
   // batch_message_type_ is already set by dispatch_message_ before reaching here.
   template<typename T> static uint16_t encode_message_to_buffer(T &msg, APIConnection *conn, uint32_t remaining_size) {
-    if constexpr (T::ESTIMATED_SIZE == 0) {
-      return encode_to_buffer_slow(0, &encode_msg_noop, &msg, conn, remaining_size);
-    } else {
-      return encode_to_buffer_slow(msg.calculate_size(), &proto_encode_msg<T>, &msg, conn, remaining_size);
-    }
+    return encode_to_buffer_slow(T::calc_size_msg(&msg), &T::encode_msg, &msg, conn, remaining_size);
   }
 
   // Non-template core — fills state fields and encodes
@@ -449,7 +431,7 @@ class APIConnection final : public APIServerConnectionBase {
   template<typename T>
   static uint16_t fill_and_encode_entity_state(EntityBase *entity, T &msg, APIConnection *conn,
                                                uint32_t remaining_size) {
-    return fill_and_encode_entity_state(entity, msg, &calc_size<T>, &proto_encode_msg<T>, conn, remaining_size);
+    return fill_and_encode_entity_state(entity, msg, &T::calc_size_msg, &T::encode_msg, conn, remaining_size);
   }
 
   // Non-template core — fills info fields, allocates buffers, and encodes
@@ -461,7 +443,7 @@ class APIConnection final : public APIServerConnectionBase {
   template<typename T>
   static uint16_t fill_and_encode_entity_info(EntityBase *entity, T &msg, APIConnection *conn,
                                               uint32_t remaining_size) {
-    return fill_and_encode_entity_info(entity, msg, &calc_size<T>, &proto_encode_msg<T>, conn, remaining_size);
+    return fill_and_encode_entity_info(entity, msg, &T::calc_size_msg, &T::encode_msg, conn, remaining_size);
   }
 
   // Non-template core — fills device_class, then delegates to fill_and_encode_entity_info
@@ -475,8 +457,8 @@ class APIConnection final : public APIServerConnectionBase {
   static uint16_t fill_and_encode_entity_info_with_device_class(EntityBase *entity, T &msg,
                                                                 StringRef &device_class_field, APIConnection *conn,
                                                                 uint32_t remaining_size) {
-    return fill_and_encode_entity_info_with_device_class(entity, msg, device_class_field, &calc_size<T>,
-                                                         &proto_encode_msg<T>, conn, remaining_size);
+    return fill_and_encode_entity_info_with_device_class(entity, msg, device_class_field, &T::calc_size_msg,
+                                                         &T::encode_msg, conn, remaining_size);
   }
 
 #ifdef USE_VOICE_ASSISTANT

esphome/components/api/api_connection_buffer.h

@@ -46,7 +46,13 @@ inline uint16_t ESPHOME_ALWAYS_INLINE APIConnection::encode_to_buffer(uint32_t c
     return 0;
   }
   ProtoWriteBuffer buffer{&shared_buf, shared_buf.size() - calculated_size};
-  encode_fn(msg, buffer PROTO_ENCODE_DEBUG_INIT(&shared_buf));
+  uint8_t *end = encode_fn(msg, buffer PROTO_ENCODE_DEBUG_INIT(&shared_buf));
+#ifdef ESPHOME_DEBUG_API
+  // A body that writes fewer bytes than calculate_size() promised would ship stale buffer bytes
+  assert(end == shared_buf.data() + shared_buf.size());
+#else
+  (void) end;
+#endif
 
   return total_calculated_size;
 }

esphome/components/api/proto.cpp

@@ -214,73 +214,74 @@ void ProtoDecodableMessage::decode(const uint8_t *buffer, size_t length) {
   const uint8_t *ptr = buffer;
   const uint8_t *end = buffer + length;
 
-  while (ptr < end) {
-    // Parse field header - ptr < end guarantees len >= 1
+  // Single-byte varints dominate, so that case advances the cursor inline.
+  auto read_varint = [&](proto_varint_value_t &value) ESPHOME_ALWAYS_INLINE {
+    if (ptr == end)
+      return false;
+    if (*ptr < 0x80) [[likely]] {
+      value = *ptr++;
+      return true;
+    }
     auto res = ProtoVarInt::parse_non_empty(ptr, end - ptr);
-    if (!res.has_value()) {
+    if (!res.has_value())
+      return false;
+    value = res.value;
+    ptr += res.consumed;
+    return true;
+  };
+
+  while (ptr < end) {
+    proto_varint_value_t tag_value;
+    if (!read_varint(tag_value)) {
       ESP_LOGV(TAG, "Invalid field start at offset %ld", (long) (ptr - buffer));
       return;
     }
 
-    uint32_t tag = static_cast<uint32_t>(res.value);
+    uint32_t tag = static_cast<uint32_t>(tag_value);
     uint32_t field_type = tag & WIRE_TYPE_MASK;
-    uint32_t field_id = tag >> 3;
-    ptr += res.consumed;
+    // Length-delimited fields move this past the length prefix
+    const uint8_t *data = ptr;
+    proto_varint_value_t scalar;
 
-    switch (field_type) {
-      case WIRE_TYPE_VARINT: {  // VarInt
-        res = ProtoVarInt::parse(ptr, end - ptr);
-        if (!res.has_value()) {
-          ESP_LOGV(TAG, "Invalid VarInt at offset %ld", (long) (ptr - buffer));
-          return;
-        }
-        if (!this->decode_varint(field_id, res.value)) {
-          ESP_LOGV(TAG, "Cannot decode VarInt field %" PRIu32 " with value %" PRIu64 "!", field_id,
-                   static_cast<uint64_t>(res.value));
-        }
-        ptr += res.consumed;
-        break;
-      }
-      case WIRE_TYPE_LENGTH_DELIMITED: {  // Length-delimited
-        res = ProtoVarInt::parse(ptr, end - ptr);
-        if (!res.has_value()) {
-          ESP_LOGV(TAG, "Invalid Length Delimited at offset %ld", (long) (ptr - buffer));
-          return;
-        }
-        uint32_t field_length = static_cast<uint32_t>(res.value);
-        ptr += res.consumed;
-        if (field_length > static_cast<size_t>(end - ptr)) {
-          ESP_LOGV(TAG, "Out-of-bounds Length Delimited at offset %ld", (long) (ptr - buffer));
-          return;
-        }
-        if (!this->decode_length(field_id, ProtoLengthDelimited(ptr, field_length))) {
-          ESP_LOGV(TAG, "Cannot decode Length Delimited field %" PRIu32 "!", field_id);
-        }
-        ptr += field_length;
-        break;
-      }
-      case WIRE_TYPE_FIXED32: {  // 32-bit
-        if (end - ptr < 4) {
-          ESP_LOGV(TAG, "Out-of-bounds Fixed32-bit at offset %ld", (long) (ptr - buffer));
-          return;
-        }
-        uint32_t val;
-#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
-        // Protobuf fixed32 is little-endian — direct load on LE platforms
-        memcpy(&val, ptr, 4);
-#else
-        val = encode_uint32(ptr[3], ptr[2], ptr[1], ptr[0]);
-#endif
-        if (!this->decode_32bit(field_id, Proto32Bit(val))) {
-          ESP_LOGV(TAG, "Cannot decode 32-bit field %" PRIu32 " with value %" PRIu32 "!", field_id, val);
-        }
-        ptr += 4;
-        break;
-      }
-      default:
-        ESP_LOGV(TAG, "Invalid field type %" PRIu32 " at offset %ld", field_type, (long) (ptr - buffer));
+    if (field_type == WIRE_TYPE_VARINT) [[likely]] {
+      if (!read_varint(scalar)) {
+        ESP_LOGV(TAG, "Invalid VarInt at offset %ld", (long) (ptr - buffer));
         return;
+      }
+    } else {
+      switch (field_type) {
+        case WIRE_TYPE_LENGTH_DELIMITED: {
+          proto_varint_value_t length_value;
+          if (!read_varint(length_value)) {
+            ESP_LOGV(TAG, "Invalid Length Delimited at offset %ld", (long) (ptr - buffer));
+            return;
+          }
+          uint32_t field_length = static_cast<uint32_t>(length_value);
+          if (field_length > static_cast<size_t>(end - ptr)) {
+            ESP_LOGV(TAG, "Out-of-bounds Length Delimited at offset %ld", (long) (ptr - buffer));
+            return;
+          }
+          data = ptr;
+          scalar = field_length;
+          ptr += field_length;
+          break;
+        }
+        case WIRE_TYPE_FIXED32: {
+          if (end - ptr < 4) {
+            ESP_LOGV(TAG, "Out-of-bounds Fixed32-bit at offset %ld", (long) (ptr - buffer));
+            return;
+          }
+          // Byte loads instead of memcpy: ESP-IDF passes -fno-builtin-memcpy, which made this a call
+          scalar = encode_uint32(ptr[3], ptr[2], ptr[1], ptr[0]);
+          ptr += 4;
+          break;
+        }
+        default:
+          ESP_LOGV(TAG, "Invalid field type %" PRIu32 " at offset %ld", field_type, (long) (ptr - buffer));
+          return;
+      }
     }
+    this->decode_field(tag, data, scalar);
   }
 }
 

esphome/components/api/proto.h

@@ -170,40 +170,43 @@ class ProtoVarInt {
 class ProtoMessage;
 class ProtoSize;
 
-class ProtoLengthDelimited {
+/// Case label for decode_field(): the wire tag of a field, so a field that arrives with another wire
+/// type matches no case.
+constexpr uint32_t proto_tag(uint32_t field_id, uint32_t wire_type) { return (field_id << 3) | wire_type; }
+
+/// One decoded field: the payload pointer and a scalar holding the varint or fixed32 value, or the
+/// length of a length-delimited field. The wire type in the tag says which applies; accessors do not check.
+class ProtoFieldValue {
  public:
-  explicit ProtoLengthDelimited(const uint8_t *value, size_t length) : value_(value), length_(length) {}
-  std::string as_string() const { return std::string(reinterpret_cast<const char *>(this->value_), this->length_); }
+  ProtoFieldValue(const uint8_t *data, proto_varint_value_t scalar) : data_(data), scalar_(scalar) {}
 
-  // Direct access to raw data without string allocation
-  const uint8_t *data() const { return this->value_; }
-  size_t size() const { return this->length_; }
+  proto_varint_value_t as_varint() const { return this->scalar_; }
+  // A bool is sent as 0 or 1, so the low word is enough and saves a second compare with 64 bit varints
+  bool as_bool() const { return static_cast<uint32_t>(this->scalar_) != 0; }
 
-  /// Decode the length-delimited data into a message instance.
+  // Length-delimited accessors
+  const uint8_t *data() const { return this->data_; }
+  size_t size() const { return static_cast<size_t>(this->scalar_); }
+  std::string as_string() const { return std::string(reinterpret_cast<const char *>(this->data_), this->size()); }
+  /// Decode the length-delimited payload into a message instance.
   /// Template preserves concrete type so decode() resolves statically.
-  template<typename T> void decode_to_message(T &msg) const;
+  template<typename T> void decode_to_message(T &msg) const { msg.decode(this->data_, this->size()); }
 
- protected:
-  const uint8_t *const value_;
-  const size_t length_;
-};
-
-class Proto32Bit {
- public:
-  explicit Proto32Bit(uint32_t value) : value_(value) {}
-  uint32_t as_fixed32() const { return this->value_; }
-  int32_t as_sfixed32() const { return static_cast<int32_t>(this->value_); }
+  // Fixed32 accessors
+  uint32_t as_fixed32() const { return static_cast<uint32_t>(this->scalar_); }
+  int32_t as_sfixed32() const { return static_cast<int32_t>(this->as_fixed32()); }
   float as_float() const {
     union {
       uint32_t raw;
       float value;
     } s{};
-    s.raw = this->value_;
+    s.raw = this->as_fixed32();
     return s.value;
   }
 
- protected:
-  const uint32_t value_;
+ private:
+  const uint8_t *data_;
+  proto_varint_value_t scalar_;
 };
 
 // NOTE: Proto64Bit class removed - wire type 1 (64-bit fixed) not supported
@@ -252,7 +255,7 @@ class ProtoWriteBuffer {
    *
    * Following https://protobuf.dev/programming-guides/encoding/#structure
    */
-  void encode_field_raw(uint32_t field_id, uint32_t type) { this->encode_varint_raw((field_id << 3) | type); }
+  void encode_field_raw(uint32_t field_id, uint32_t type) { this->encode_varint_raw(proto_tag(field_id, type)); }
   /// Single-pass encode for repeated submessage elements.
   /// Thin template wrapper; all buffer work is in the non-template core.
   template<typename T> void encode_sub_message(uint32_t field_id, const T &value);
@@ -287,19 +290,31 @@ class ProtoWriteBuffer {
   uint8_t *pos_;
 };
 
+// A four byte unaligned store is a memcpy call on ESP-IDF (-fno-builtin-memcpy) and on ARM cores without
+// unaligned access (Cortex-M0+, ARM9), so those targets share one outlined byte store helper per fixed32
+// field. Elsewhere the write inlines to a single store, or on ESP8266 to a few stores that measured
+// faster than a call, so it stays inline.
+#if defined(USE_ESP32) || (defined(__arm__) && !defined(__ARM_FEATURE_UNALIGNED))
+#define PROTO_OUTLINE_FOR_SIZE __attribute__((noinline))
+#define PROTO_FIXED32_BYTE_STORES true
+#else
+#define PROTO_OUTLINE_FOR_SIZE inline
+#define PROTO_FIXED32_BYTE_STORES false
+#endif
+
 // Varint encoding thresholds — used by both proto_encode_* free functions and ProtoSize.
 constexpr uint32_t VARINT_MAX_1_BYTE = 1 << 7;   // 128
 constexpr uint32_t VARINT_MAX_2_BYTE = 1 << 14;  // 16384
 
-/// Static encode helpers for generated encode() functions.
-/// Generated code hoists buffer.pos_ into a local uint8_t *__restrict__ pos,
-/// then calls these methods which take pos by reference. No struct, no overhead.
-/// For sub-messages, pos is synced back to buffer before the call and reloaded after.
+/// Static encode helpers for the generated encode bodies. Each takes the write cursor by value and
+/// returns it advanced, so outlined calls at -Os chain through the return register instead of a
+/// stack slot. Helpers without a _force suffix skip fields holding the proto3 default.
 class ProtoEncode {
  public:
   /// Write a multi-byte varint directly through a pos pointer.
   template<typename T>
-  static inline void encode_varint_raw_loop(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, T value) {
+  [[nodiscard]] static inline uint8_t *encode_varint_raw_loop(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                              T value) {
     do {
       PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
       *pos++ = static_cast<uint8_t>(value | 0x80);
@@ -307,48 +322,49 @@ class ProtoEncode {
     } while (value > 0x7F);
     PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
     *pos++ = static_cast<uint8_t>(value);
+    return pos;
   }
-  static inline void ESPHOME_ALWAYS_INLINE encode_varint_raw(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-                                                             uint32_t value) {
+  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  encode_varint_raw(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint32_t value) {
     if (value < VARINT_MAX_1_BYTE) [[likely]] {
       PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
       *pos++ = static_cast<uint8_t>(value);
-      return;
+      return pos;
     }
-    encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, value);
+    return encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, value);
   }
   /// Encode a varint that is expected to be 1-2 bytes (e.g. zigzag RSSI, small lengths).
-  static inline void ESPHOME_ALWAYS_INLINE encode_varint_raw_short(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-                                                                   uint32_t value) {
+  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  encode_varint_raw_short(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint32_t value) {
     if (value < VARINT_MAX_1_BYTE) [[likely]] {
       PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
       *pos++ = static_cast<uint8_t>(value);
-      return;
+      return pos;
     }
     if (value < VARINT_MAX_2_BYTE) [[likely]] {
       PROTO_ENCODE_CHECK_BOUNDS(pos, 2);
       *pos++ = static_cast<uint8_t>(value | 0x80);
       *pos++ = static_cast<uint8_t>(value >> 7);
-      return;
+      return pos;
     }
-    encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, value);
+    return encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, value);
   }
-  static inline void ESPHOME_ALWAYS_INLINE encode_varint_raw_64(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-                                                                uint64_t value) {
+  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  encode_varint_raw_64(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint64_t value) {
     if (value < VARINT_MAX_1_BYTE) [[likely]] {
       PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
       *pos++ = static_cast<uint8_t>(value);
-      return;
+      return pos;
     }
-    encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, value);
+    return encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, value);
   }
   /// Encode a 48-bit MAC address (stored in a uint64) as varint.
   /// Real MAC addresses occupy the full 48 bits (OUI in upper 24), so the
   /// fast path -- any non-zero bit in the top 6 of 48 -- emits exactly 7 bytes
   /// with no per-byte branch. Falls back to the general loop otherwise.
   /// Caller must guarantee value fits in 48 bits (checked in debug builds).
-  static inline void ESPHOME_ALWAYS_INLINE encode_varint_raw_48bit(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-                                                                   uint64_t value) {
+  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  encode_varint_raw_48bit(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint64_t value) {
 #ifdef ESPHOME_DEBUG_API
     assert(value < (1ULL << (MAC_ADDRESS_SIZE * 8)) && "encode_varint_raw_48bit: value exceeds 48 bits");
 #endif
@@ -363,38 +379,39 @@ class ProtoEncode {
       pos[4] = static_cast<uint8_t>((value >> 28) | 0x80);
       pos[5] = static_cast<uint8_t>((value >> 35) | 0x80);
       pos[6] = static_cast<uint8_t>(value >> 42);
-      pos += 7;
-      return;
+      return pos + 7;
     }
-    encode_varint_raw_64(pos PROTO_ENCODE_DEBUG_ARG, value);
+    return encode_varint_raw_64(pos PROTO_ENCODE_DEBUG_ARG, value);
   }
-  static inline void ESPHOME_ALWAYS_INLINE encode_field_raw(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-                                                            uint32_t field_id, uint32_t type) {
-    encode_varint_raw(pos PROTO_ENCODE_DEBUG_ARG, (field_id << 3) | type);
+  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  encode_field_raw(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id, uint32_t type) {
+    return encode_varint_raw(pos PROTO_ENCODE_DEBUG_ARG, proto_tag(field_id, type));
   }
   /// Write a single precomputed tag byte. Tag must be < 128.
-  static inline void ESPHOME_ALWAYS_INLINE write_raw_byte(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-                                                          uint8_t b) {
+  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  write_raw_byte(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint8_t b) {
     PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
     *pos++ = b;
+    return pos;
   }
   /// Reserve one byte for later backpatch (e.g., sub-message length).
   /// Advances pos past the reserved byte without writing a value.
-  static inline void ESPHOME_ALWAYS_INLINE reserve_byte(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM) {
+  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  reserve_byte(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM) {
     PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
-    pos++;
+    return pos + 1;
   }
   /// Write raw bytes to the buffer (no tag, no length prefix).
-  static inline void ESPHOME_ALWAYS_INLINE encode_raw(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-                                                      const void *data, size_t len) {
+  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  encode_raw(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, const void *data, size_t len) {
     PROTO_ENCODE_CHECK_BOUNDS(pos, len);
     std::memcpy(pos, data, len);
-    pos += len;
+    return pos + len;
   }
   /// Encode tag + 1-byte length + raw string data. For strings with max_data_length < 128.
   /// Tag must be a single-byte varint (< 128). Always encodes (no zero check).
-  static inline void encode_short_string_force(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint8_t tag,
-                                               const StringRef &ref) {
+  [[nodiscard]] static inline uint8_t *encode_short_string_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                                 uint8_t tag, const StringRef &ref) {
 #ifdef ESPHOME_DEBUG_API
     assert(ref.size() < 128 && "encode_short_string_force: string exceeds max_data_length < 128");
 #endif
@@ -402,137 +419,191 @@ class ProtoEncode {
     pos[0] = tag;
     pos[1] = static_cast<uint8_t>(ref.size());
     std::memcpy(pos + 2, ref.c_str(), ref.size());
-    pos += 2 + ref.size();
+    return pos + 2 + ref.size();
   }
-  /// Write a precomputed tag byte + 32-bit value in one operation.
-  static inline void ESPHOME_ALWAYS_INLINE write_tag_and_fixed32(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-                                                                 uint8_t tag, uint32_t value) {
+  /// Write a precomputed tag byte + 32-bit value. Outlined on embedded: one copy beats inline stores per field.
+  [[nodiscard]] static PROTO_OUTLINE_FOR_SIZE uint8_t *write_tag_and_fixed32(
+      uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint8_t tag, uint32_t value) {
     PROTO_ENCODE_CHECK_BOUNDS(pos, 5);
     pos[0] = tag;
-#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
-    std::memcpy(pos + 1, &value, 4);
-#else
-    pos[1] = static_cast<uint8_t>(value & 0xFF);
-    pos[2] = static_cast<uint8_t>((value >> 8) & 0xFF);
-    pos[3] = static_cast<uint8_t>((value >> 16) & 0xFF);
-    pos[4] = static_cast<uint8_t>((value >> 24) & 0xFF);
-#endif
-    pos += 5;
+    write_fixed32_le(pos + 1, value);
+    return pos + 5;
   }
-  static inline void encode_string(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                   const char *string, size_t len, bool force = false) {
-    if (len == 0 && !force)
-      return;
-    encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 2);  // type 2: Length-delimited string
+  [[nodiscard]] static inline uint8_t *encode_string_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                           uint32_t field_id, const char *string, size_t len) {
+    pos = encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 2);  // type 2: Length-delimited string
     // NOLINTNEXTLINE(readability-inconsistent-ifelse-braces) -- false positive on [[likely]] attribute
     if (len < VARINT_MAX_1_BYTE) [[likely]] {
       PROTO_ENCODE_CHECK_BOUNDS(pos, 1 + len);
       *pos++ = static_cast<uint8_t>(len);
     } else {
-      encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, len);
+      pos = encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, len);
       PROTO_ENCODE_CHECK_BOUNDS(pos, len);
     }
     std::memcpy(pos, string, len);
-    pos += len;
+    return pos + len;
   }
-  static inline void encode_string(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                   const std::string &value, bool force = false) {
-    encode_string(pos PROTO_ENCODE_DEBUG_ARG, field_id, value.data(), value.size(), force);
+  [[nodiscard]] static inline uint8_t *encode_string(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                     uint32_t field_id, const char *string, size_t len) {
+    if (len == 0)
+      return pos;
+    return encode_string_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, string, len);
   }
-  static inline void encode_string(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                   const StringRef &ref, bool force = false) {
-    encode_string(pos PROTO_ENCODE_DEBUG_ARG, field_id, ref.c_str(), ref.size(), force);
+  [[nodiscard]] static inline uint8_t *encode_string_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                           uint32_t field_id, const std::string &value) {
+    return encode_string_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, value.data(), value.size());
   }
-  static inline void encode_bytes(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                  const uint8_t *data, size_t len, bool force = false) {
-    encode_string(pos PROTO_ENCODE_DEBUG_ARG, field_id, reinterpret_cast<const char *>(data), len, force);
+  [[nodiscard]] static inline uint8_t *encode_string(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                     uint32_t field_id, const StringRef &ref) {
+    return encode_string(pos PROTO_ENCODE_DEBUG_ARG, field_id, ref.c_str(), ref.size());
   }
-  static inline void encode_uint32(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                   uint32_t value, bool force = false) {
-    if (value == 0 && !force)
-      return;
-    encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 0);
-    encode_varint_raw(pos PROTO_ENCODE_DEBUG_ARG, value);
+  [[nodiscard]] static inline uint8_t *encode_string_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                           uint32_t field_id, const StringRef &ref) {
+    return encode_string_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, ref.c_str(), ref.size());
   }
-  static inline void encode_uint64(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                   uint64_t value, bool force = false) {
-    if (value == 0 && !force)
-      return;
-    encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 0);
-    encode_varint_raw_64(pos PROTO_ENCODE_DEBUG_ARG, value);
+  [[nodiscard]] static inline uint8_t *encode_bytes(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                    uint32_t field_id, const uint8_t *data, size_t len) {
+    return encode_string(pos PROTO_ENCODE_DEBUG_ARG, field_id, reinterpret_cast<const char *>(data), len);
   }
-  static inline void encode_bool(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id, bool value,
-                                 bool force = false) {
-    if (!value && !force)
-      return;
-    encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 0);
+  [[nodiscard]] static inline uint8_t *encode_bytes_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                          uint32_t field_id, const uint8_t *data, size_t len) {
+    return encode_string_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, reinterpret_cast<const char *>(data), len);
+  }
+  [[nodiscard]] static inline uint8_t *encode_uint32_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                           uint32_t field_id, uint32_t value) {
+    pos = encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 0);
+    return encode_varint_raw(pos PROTO_ENCODE_DEBUG_ARG, value);
+  }
+  [[nodiscard]] static inline uint8_t *encode_uint32(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                     uint32_t field_id, uint32_t value) {
+    if (value == 0)
+      return pos;
+    return encode_uint32_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, value);
+  }
+  [[nodiscard]] static inline uint8_t *encode_uint64_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                           uint32_t field_id, uint64_t value) {
+    pos = encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 0);
+    return encode_varint_raw_64(pos PROTO_ENCODE_DEBUG_ARG, value);
+  }
+  [[nodiscard]] static inline uint8_t *encode_uint64(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                     uint32_t field_id, uint64_t value) {
+    if (value == 0)
+      return pos;
+    return encode_uint64_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, value);
+  }
+  [[nodiscard]] static inline uint8_t *encode_bool_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                         uint32_t field_id, bool value) {
+    pos = encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 0);
     PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
     *pos++ = value ? 0x01 : 0x00;
+    return pos;
   }
-  static inline void encode_fixed32(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                    uint32_t value, bool force = false) {
-    if (value == 0 && !force)
-      return;
-    encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 5);
+  [[nodiscard]] static inline uint8_t *encode_bool(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                   uint32_t field_id, bool value) {
+    if (!value)
+      return pos;
+    return encode_bool_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, value);
+  }
+  /// Tag + fixed32 for multi-byte tags; single-byte tags use write_tag_and_fixed32.
+  [[nodiscard]] static PROTO_OUTLINE_FOR_SIZE uint8_t *encode_fixed32_force(
+      uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id, uint32_t value) {
+    pos = encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 5);
     PROTO_ENCODE_CHECK_BOUNDS(pos, 4);
-#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
-    std::memcpy(pos, &value, 4);
-    pos += 4;
-#else
-    *pos++ = (value >> 0) & 0xFF;
-    *pos++ = (value >> 8) & 0xFF;
-    *pos++ = (value >> 16) & 0xFF;
-    *pos++ = (value >> 24) & 0xFF;
-#endif
+    write_fixed32_le(pos, value);
+    return pos + 4;
+  }
+  [[nodiscard]] static inline uint8_t *encode_fixed32(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                      uint32_t field_id, uint32_t value) {
+    if (value == 0)
+      return pos;
+    return encode_fixed32_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, value);
   }
   // NOTE: Wire type 1 (64-bit fixed: double, fixed64, sfixed64) is intentionally
   // not supported to reduce overhead on embedded systems. All ESPHome devices are
   // 32-bit microcontrollers where 64-bit operations are expensive. If 64-bit support
   // is needed in the future, the necessary encoding/decoding functions must be added.
-  static inline void encode_float(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id, float value,
-                                  bool force = false) {
-    uint32_t raw = float_to_raw(value);
-    if (raw == 0 && !force)
-      return;
-    encode_fixed32(pos PROTO_ENCODE_DEBUG_ARG, field_id, raw);
+  [[nodiscard]] static inline uint8_t *encode_float(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                    uint32_t field_id, float value) {
+    return encode_fixed32(pos PROTO_ENCODE_DEBUG_ARG, field_id, float_to_raw(value));
   }
-  static inline void encode_int32(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id, int32_t value,
-                                  bool force = false) {
+  [[nodiscard]] static inline uint8_t *encode_float_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                          uint32_t field_id, float value) {
+    return encode_fixed32_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, float_to_raw(value));
+  }
+  [[nodiscard]] static inline uint8_t *encode_int32_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                          uint32_t field_id, int32_t value) {
     if (value < 0) {
       // negative int32 is always 10 byte long
-      encode_uint64(pos PROTO_ENCODE_DEBUG_ARG, field_id, static_cast<uint64_t>(value), force);
-      return;
+      return encode_uint64_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, static_cast<uint64_t>(value));
     }
-    encode_uint32(pos PROTO_ENCODE_DEBUG_ARG, field_id, static_cast<uint32_t>(value), force);
+    return encode_uint32_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, static_cast<uint32_t>(value));
   }
-  static inline void encode_int64(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id, int64_t value,
-                                  bool force = false) {
-    encode_uint64(pos PROTO_ENCODE_DEBUG_ARG, field_id, static_cast<uint64_t>(value), force);
+  [[nodiscard]] static inline uint8_t *encode_int32(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                    uint32_t field_id, int32_t value) {
+    if (value == 0)
+      return pos;
+    return encode_int32_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, value);
   }
-  static inline void encode_sint32(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                   int32_t value, bool force = false) {
-    encode_uint32(pos PROTO_ENCODE_DEBUG_ARG, field_id, encode_zigzag32(value), force);
+  [[nodiscard]] static inline uint8_t *encode_int64(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                    uint32_t field_id, int64_t value) {
+    return encode_uint64(pos PROTO_ENCODE_DEBUG_ARG, field_id, static_cast<uint64_t>(value));
   }
-  static inline void encode_sint64(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                   int64_t value, bool force = false) {
-    encode_uint64(pos PROTO_ENCODE_DEBUG_ARG, field_id, encode_zigzag64(value), force);
+  [[nodiscard]] static inline uint8_t *encode_int64_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                          uint32_t field_id, int64_t value) {
+    return encode_uint64_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, static_cast<uint64_t>(value));
   }
-  /// Sub-message encoding: sync pos to buffer, delegate, get pos from return value.
+  [[nodiscard]] static inline uint8_t *encode_sint32(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                     uint32_t field_id, int32_t value) {
+    return encode_uint32(pos PROTO_ENCODE_DEBUG_ARG, field_id, encode_zigzag32(value));
+  }
+  [[nodiscard]] static inline uint8_t *encode_sint32_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                           uint32_t field_id, int32_t value) {
+    return encode_uint32_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, encode_zigzag32(value));
+  }
+  [[nodiscard]] static inline uint8_t *encode_sint64(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                     uint32_t field_id, int64_t value) {
+    return encode_uint64(pos PROTO_ENCODE_DEBUG_ARG, field_id, encode_zigzag64(value));
+  }
+  [[nodiscard]] static inline uint8_t *encode_sint64_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                           uint32_t field_id, int64_t value) {
+    return encode_uint64_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, encode_zigzag64(value));
+  }
+  /// Sub-message encoding: sync pos to buffer, delegate, read the cursor back.
   template<typename T>
-  static inline void encode_sub_message(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, ProtoWriteBuffer &buffer,
-                                        uint32_t field_id, const T &value) {
+  [[nodiscard]] static inline uint8_t *encode_sub_message(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                          ProtoWriteBuffer &buffer, uint32_t field_id, const T &value) {
     buffer.set_pos(pos);
     buffer.encode_sub_message(field_id, value);
-    pos = buffer.get_pos();
+    return buffer.get_pos();
   }
   template<typename T>
-  static inline void encode_optional_sub_message(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-                                                 ProtoWriteBuffer &buffer, uint32_t field_id, const T &value) {
+  [[nodiscard]] static inline uint8_t *encode_optional_sub_message(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+                                                                   ProtoWriteBuffer &buffer, uint32_t field_id,
+                                                                   const T &value) {
     buffer.set_pos(pos);
     buffer.encode_optional_sub_message(field_id, value);
-    pos = buffer.get_pos();
+    return buffer.get_pos();
+  }
+
+ private:
+  /// Unaligned little endian store of four bytes: byte stores where the outlined helper lives (ESP-IDF, ARM
+  /// without unaligned access), otherwise a memcpy the compiler folds into one store. Callers bounds check
+  /// and advance the cursor themselves.
+  static inline void ESPHOME_ALWAYS_INLINE write_fixed32_le(uint8_t *__restrict__ pos, uint32_t value) {
+    if constexpr (PROTO_FIXED32_BYTE_STORES) {
+      // Spelled out so the outlined helper does not itself become a memcpy call
+      pos[0] = static_cast<uint8_t>(value);
+      pos[1] = static_cast<uint8_t>(value >> 8);
+      pos[2] = static_cast<uint8_t>(value >> 16);
+      pos[3] = static_cast<uint8_t>(value >> 24);
+    } else {
+      const uint32_t le = convert_little_endian(value);
+      __builtin_memcpy(pos, &le, 4);
+    }
   }
 };
+#undef PROTO_OUTLINE_FOR_SIZE
+#undef PROTO_FIXED32_BYTE_STORES
 
 #ifdef HAS_PROTO_MESSAGE_DUMP
 /**
@@ -624,11 +695,12 @@ class DumpBuffer {
 
 class ProtoMessage {
  public:
-  // Non-virtual defaults for messages with no fields.
-  // Concrete message classes hide these with their own implementations.
-  // All call sites use templates to preserve the concrete type, so virtual
-  // dispatch is not needed. This eliminates per-message vtable entries for
-  // encode/calculate_size, saving ~1.3 KB of flash across all message types.
+  // Non-virtual defaults for messages with no fields; generated classes hide all four. The
+  // static encode_msg/calc_size_msg take const void * so &T::encode_msg needs no thunk.
+  static uint8_t *encode_msg(const void *self, ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) {
+    return buffer.get_pos();
+  }
+  static uint32_t calc_size_msg(const void *self) { return 0; }
   uint8_t *encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) const { return buffer.get_pos(); }
   uint32_t calculate_size() const { return 0; }
 #ifdef HAS_PROTO_MESSAGE_DUMP
@@ -663,10 +735,10 @@ class ProtoDecodableMessage : public ProtoMessage {
 
  protected:
   ~ProtoDecodableMessage() = default;
-  virtual bool decode_varint(uint32_t field_id, proto_varint_value_t value) { return false; }
-  virtual bool decode_length(uint32_t field_id, ProtoLengthDelimited value) { return false; }
-  virtual bool decode_32bit(uint32_t field_id, Proto32Bit value) { return false; }
-  // NOTE: decode_64bit removed - wire type 1 not supported
+  /// Store one decoded field; \p scalar is the varint or fixed32 value, or the length of the
+  /// length-delimited payload at \p data. An unknown field or wrong wire type matches no case and is skipped.
+  /// Three register arguments keep the decode loop free of spills.
+  virtual void decode_field(uint32_t tag, const uint8_t *data, proto_varint_value_t scalar) {}
 };
 
 class ProtoSize {
@@ -792,7 +864,7 @@ class ProtoSize {
    * @return The number of bytes needed to encode the field ID and wire type
    */
   static constexpr uint32_t field(uint32_t field_id, uint32_t type) {
-    uint32_t tag = (field_id << 3) | (type & WIRE_TYPE_MASK);
+    uint32_t tag = proto_tag(field_id, type & WIRE_TYPE_MASK);
     return varint(tag);
   }
 
@@ -876,24 +948,14 @@ class ProtoSize {
 
 // Implementation of methods that depend on ProtoSize being fully defined
 
-// Encode thunk — converts void* back to concrete type for direct encode() call
-template<typename T> uint8_t *proto_encode_msg(const void *msg, ProtoWriteBuffer &buf PROTO_ENCODE_DEBUG_PARAM) {
-  return static_cast<const T *>(msg)->encode(buf PROTO_ENCODE_DEBUG_ARG);
-}
-
 // Thin template wrapper; delegates to non-template core in proto.cpp.
 template<typename T> inline void ProtoWriteBuffer::encode_sub_message(uint32_t field_id, const T &value) {
-  this->encode_sub_message(field_id, &value, &proto_encode_msg<T>);
+  this->encode_sub_message(field_id, &value, &T::encode_msg);
 }
 
 // Thin template wrapper; delegates to non-template core.
 template<typename T> inline void ProtoWriteBuffer::encode_optional_sub_message(uint32_t field_id, const T &value) {
-  this->encode_optional_sub_message(field_id, value.calculate_size(), &value, &proto_encode_msg<T>);
-}
-
-// Template decode_to_message - preserves concrete type so decode() resolves statically
-template<typename T> void ProtoLengthDelimited::decode_to_message(T &msg) const {
-  msg.decode(this->value_, this->length_);
+  this->encode_optional_sub_message(field_id, T::calc_size_msg(&value), &value, &T::encode_msg);
 }
 
 template<typename T> const char *proto_enum_to_string(T value);

esphome/components/atm90e32/atm90e32.cpp

@@ -9,10 +9,6 @@ namespace esphome::atm90e32 {
 
 static const char *const TAG = "atm90e32";
 
-static const LogString *offset_calibration_name(bool power_offsets) {
-  return power_offsets ? LOG_STR("Power offset") : LOG_STR("Offset");
-}
-
 static uint32_t pref_hash(const char *prefix, const char *name_space) {
   auto hash = fnv1_hash(prefix);
   return fnv1_hash_extend(hash, name_space);
@@ -207,12 +203,13 @@ void ATM90E32Component::setup() {
 
     // Initialize flash storage for power offset calibrations
     uint32_t po_hash = pref_hash("_power_offset_calibration_", cs);
-    this->power_offset_pref_ = global_preferences->make_preference<OffsetCalibration[3]>(po_hash, true);
+    this->power_offset_pref_ = global_preferences->make_preference<PowerOffsetCalibration[3]>(po_hash, true);
     bool migrated_power_offset = false;
     if (has_distinct_legacy_namespace) {
       uint32_t legacy_po_hash = pref_hash("_power_offset_calibration_", legacy_cs);
-      auto legacy_power_offset_pref = global_preferences->make_preference<OffsetCalibration[3]>(legacy_po_hash, true);
-      OffsetCalibration power_offset_data[3]{};
+      auto legacy_power_offset_pref =
+          global_preferences->make_preference<PowerOffsetCalibration[3]>(legacy_po_hash, true);
+      PowerOffsetCalibration power_offset_data[3]{};
       int migration_status =
           migrate_legacy_pref_if_needed(this->power_offset_pref_, legacy_power_offset_pref, &power_offset_data);
       migrated_power_offset = migration_status > 0;
@@ -227,20 +224,20 @@ void ATM90E32Component::setup() {
       global_preferences->sync();
     }
 
-    this->restore_offset_calibrations_(OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_VOLTAGE_CURRENT);
-    this->restore_offset_calibrations_(OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER);
+    this->restore_offset_calibrations_();
+    this->restore_power_offset_calibrations_();
   } else {
     ESP_LOGI(TAG, "[CALIBRATION][%s] Power & Voltage/Current offset calibration is disabled. Using config file values.",
              cs);
     for (uint8_t phase = 0; phase < 3; ++phase) {
       this->write16_(this->voltage_offset_registers[phase],
-                     static_cast<uint16_t>(this->offset_phase_[phase].first_offset));
+                     static_cast<uint16_t>(this->offset_phase_[phase].voltage_offset_));
       this->write16_(this->current_offset_registers[phase],
-                     static_cast<uint16_t>(this->offset_phase_[phase].second_offset));
+                     static_cast<uint16_t>(this->offset_phase_[phase].current_offset_));
       this->write16_(this->power_offset_registers[phase],
-                     static_cast<uint16_t>(this->power_offset_phase_[phase].first_offset));
+                     static_cast<uint16_t>(this->power_offset_phase_[phase].active_power_offset));
       this->write16_(this->reactive_power_offset_registers[phase],
-                     static_cast<uint16_t>(this->power_offset_phase_[phase].second_offset));
+                     static_cast<uint16_t>(this->power_offset_phase_[phase].reactive_power_offset));
     }
   }
 
@@ -320,8 +317,8 @@ void ATM90E32Component::log_calibration_status_() {
              cs);
     for (uint8_t phase = 0; phase < 3; ++phase) {
       ESP_LOGW(TAG, "[CALIBRATION][%s] |   %c   |  %6d  | %6d  |  %6d  | %6d  |", cs, 'A' + phase,
-               this->config_offset_phase_[phase].first_offset, this->offset_phase_[phase].first_offset,
-               this->config_offset_phase_[phase].second_offset, this->offset_phase_[phase].second_offset);
+               this->config_offset_phase_[phase].voltage_offset_, this->offset_phase_[phase].voltage_offset_,
+               this->config_offset_phase_[phase].current_offset_, this->offset_phase_[phase].current_offset_);
     }
     ESP_LOGW(TAG,
              "[CALIBRATION][%s] ===============================================================================", cs);
@@ -338,8 +335,10 @@ void ATM90E32Component::log_calibration_status_() {
              cs);
     for (uint8_t phase = 0; phase < 3; ++phase) {
       ESP_LOGW(TAG, "[CALIBRATION][%s] |   %c   |  %6d  | %6d  |  %6d  | %6d  |", cs, 'A' + phase,
-               this->config_power_offset_phase_[phase].first_offset, this->power_offset_phase_[phase].first_offset,
-               this->config_power_offset_phase_[phase].second_offset, this->power_offset_phase_[phase].second_offset);
+               this->config_power_offset_phase_[phase].active_power_offset,
+               this->power_offset_phase_[phase].active_power_offset,
+               this->config_power_offset_phase_[phase].reactive_power_offset,
+               this->power_offset_phase_[phase].reactive_power_offset);
     }
     ESP_LOGW(TAG,
              "[CALIBRATION][%s] ===============================================================================", cs);
@@ -373,7 +372,7 @@ void ATM90E32Component::log_calibration_status_() {
     ESP_LOGI(TAG, "[CALIBRATION][%s] --------------------------------------------------------------", cs);
     for (uint8_t phase = 0; phase < 3; phase++) {
       ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |     %6d      |     %6d      |", cs, 'A' + phase,
-               this->offset_phase_[phase].first_offset, this->offset_phase_[phase].second_offset);
+               this->offset_phase_[phase].voltage_offset_, this->offset_phase_[phase].current_offset_);
     }
     ESP_LOGI(TAG, "[CALIBRATION][%s] ==============================================================\\n", cs);
   }
@@ -386,7 +385,8 @@ void ATM90E32Component::log_calibration_status_() {
     ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
     for (uint8_t phase = 0; phase < 3; phase++) {
       ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |       %6d        |        %6d        |", cs, 'A' + phase,
-               this->power_offset_phase_[phase].first_offset, this->power_offset_phase_[phase].second_offset);
+               this->power_offset_phase_[phase].active_power_offset,
+               this->power_offset_phase_[phase].reactive_power_offset);
     }
     ESP_LOGI(TAG, "[CALIBRATION][%s] =====================================================================\n", cs);
   }
@@ -756,68 +756,36 @@ void ATM90E32Component::save_gain_calibration_to_memory_() {
   }
 }
 
-void ATM90E32Component::finish_offset_calibration_(const OffsetCalibration (&previous)[3], bool previous_restored,
-                                                   bool previous_using_saved, OffsetCalibrationType type) {
-  const bool power_offsets = type == OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER;
+void ATM90E32Component::save_offset_calibration_to_memory_() {
   const char *cs = this->get_calibration_id_();
-  const LogString *name = offset_calibration_name(power_offsets);
-  OffsetCalibration(*offsets)[3] = power_offsets ? &this->power_offset_phase_ : &this->offset_phase_;
-  ESPPreferenceObject *preference = power_offsets ? &this->power_offset_pref_ : &this->offset_pref_;
-  bool *has_stored =
-      power_offsets ? &this->has_stored_power_offset_calibration_ : &this->has_stored_offset_calibration_;
-  bool *restored = power_offsets ? &this->restored_power_offset_calibration_ : &this->restored_offset_calibration_;
-  bool *mismatches = power_offsets ? this->power_offset_calibration_mismatch_ : this->offset_calibration_mismatch_;
-
-  const bool writes_verified = this->verify_offset_writes_(type);
-  bool saved = false;
-  bool synced = false;
-  if (writes_verified) {
-    saved = preference->save(offsets);
-    synced = global_preferences->sync();
-  }
-
-  if (writes_verified && saved && synced) {
+  bool success = this->offset_pref_.save(&this->offset_phase_);
+  global_preferences->sync();
+  if (success) {
     this->using_saved_calibrations_ = true;
-    *has_stored = true;
-    *restored = true;
-    for (uint8_t phase = 0; phase < 3; phase++)
-      mismatches[phase] = false;
-    ESP_LOGI(TAG, "[CALIBRATION][%s] %s calibration saved to memory. %s calibration completed and verified.", cs,
-             LOG_STR_ARG(name), LOG_STR_ARG(name));
-    return;
+    this->restored_offset_calibration_ = true;
+    for (bool &phase : this->offset_calibration_mismatch_)
+      phase = false;
+    ESP_LOGI(TAG, "[CALIBRATION][%s] Offset calibration saved to memory.", cs);
+  } else {
+    this->using_saved_calibrations_ = false;
+    ESP_LOGE(TAG, "[CALIBRATION][%s] Failed to save offset calibration to memory!", cs);
   }
+}
 
-  if (writes_verified) {
-    ESP_LOGE(TAG, "[CALIBRATION][%s] Failed to save %s calibration to memory!", cs, LOG_STR_ARG(name));
+void ATM90E32Component::save_power_offset_calibration_to_memory_() {
+  const char *cs = this->get_calibration_id_();
+  bool success = this->power_offset_pref_.save(&this->power_offset_phase_);
+  global_preferences->sync();
+  if (success) {
+    this->using_saved_calibrations_ = true;
+    this->restored_power_offset_calibration_ = true;
+    for (bool &phase : this->power_offset_calibration_mismatch_)
+      phase = false;
+    ESP_LOGI(TAG, "[CALIBRATION][%s] Power offset calibration saved to memory.", cs);
+  } else {
+    this->using_saved_calibrations_ = false;
+    ESP_LOGE(TAG, "[CALIBRATION][%s] Failed to save power offset calibration to memory!", cs);
   }
-
-  for (uint8_t phase = 0; phase < 3; phase++) {
-    this->write_offsets_to_registers_(phase, previous[phase].first_offset, previous[phase].second_offset, type);
-  }
-  const bool rollback_verified = this->verify_offset_writes_(type);
-
-  bool rollback_persisted = false;
-  if (writes_verified) {
-    OffsetCalibration rollback[3]{};
-    prepare_offset_rollback(previous, previous_restored, rollback);
-    const bool rollback_saved = preference->save(&rollback);
-    const bool rollback_synced = global_preferences->sync();
-    rollback_persisted = rollback_saved && rollback_synced;
-    if (!rollback_saved || !rollback_synced) {
-      ESP_LOGE(TAG, "[CALIBRATION][%s] Failed to persist restored %s calibration values!", cs, LOG_STR_ARG(name));
-    }
-  }
-
-  *restored = previous_restored;
-  if (rollback_persisted)
-    *has_stored = previous_restored;
-  this->using_saved_calibrations_ = previous_using_saved;
-  if (!rollback_verified) {
-    ESP_LOGE(TAG, "[CALIBRATION][%s] %s calibration failed; rollback readback verification failed.", cs,
-             LOG_STR_ARG(name));
-    return;
-  }
-  ESP_LOGE(TAG, "[CALIBRATION][%s] %s calibration failed; previous values restored.", cs, LOG_STR_ARG(name));
 }
 
 void ATM90E32Component::run_offset_calibrations() {
@@ -835,16 +803,11 @@ void ATM90E32Component::run_offset_calibrations() {
   ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_voltage | offset_current |", cs);
   ESP_LOGI(TAG, "[CALIBRATION][%s] ------------------------------------------------------------------", cs);
 
-  OffsetCalibration previous_offsets[3] = {this->offset_phase_[0], this->offset_phase_[1], this->offset_phase_[2]};
-  const bool previous_restored = this->restored_offset_calibration_;
-  const bool previous_using_saved = this->using_saved_calibrations_;
-
   for (uint8_t phase = 0; phase < 3; phase++) {
     int16_t voltage_offset = calibrate_offset(phase, true);
     int16_t current_offset = calibrate_offset(phase, false);
 
-    this->write_offsets_to_registers_(phase, voltage_offset, current_offset,
-                                      OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_VOLTAGE_CURRENT);
+    this->write_offsets_to_registers_(phase, voltage_offset, current_offset);
 
     ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |     %6d      |     %6d      |", cs, 'A' + phase, voltage_offset,
              current_offset);
@@ -852,8 +815,7 @@ void ATM90E32Component::run_offset_calibrations() {
 
   ESP_LOGI(TAG, "[CALIBRATION][%s] ==================================================================\n", cs);
 
-  this->finish_offset_calibration_(previous_offsets, previous_restored, previous_using_saved,
-                                   OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_VOLTAGE_CURRENT);
+  this->save_offset_calibration_to_memory_();
 }
 
 void ATM90E32Component::run_power_offset_calibrations() {
@@ -872,25 +834,18 @@ void ATM90E32Component::run_power_offset_calibrations() {
   ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_active_power | offset_reactive_power |", cs);
   ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
 
-  OffsetCalibration previous_offsets[3] = {this->power_offset_phase_[0], this->power_offset_phase_[1],
-                                           this->power_offset_phase_[2]};
-  const bool previous_restored = this->restored_power_offset_calibration_;
-  const bool previous_using_saved = this->using_saved_calibrations_;
-
   for (uint8_t phase = 0; phase < 3; ++phase) {
     int16_t active_offset = calibrate_power_offset(phase, false);
     int16_t reactive_offset = calibrate_power_offset(phase, true);
 
-    this->write_offsets_to_registers_(phase, active_offset, reactive_offset,
-                                      OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER);
+    this->write_power_offsets_to_registers_(phase, active_offset, reactive_offset);
 
     ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |       %6d        |        %6d        |", cs, 'A' + phase, active_offset,
              reactive_offset);
   }
   ESP_LOGI(TAG, "[CALIBRATION][%s] =====================================================================\n", cs);
 
-  this->finish_offset_calibration_(previous_offsets, previous_restored, previous_using_saved,
-                                   OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER);
+  this->save_power_offset_calibration_to_memory_();
 }
 
 void ATM90E32Component::write_gains_to_registers_() {
@@ -904,26 +859,35 @@ void ATM90E32Component::write_gains_to_registers_() {
   this->write16_(ATM90E32_REGISTER_CFGREGACCEN, 0x0000);
 }
 
-void ATM90E32Component::write_offsets_to_registers_(uint8_t phase, int16_t first_offset, int16_t second_offset,
-                                                    OffsetCalibrationType type) {
-  const bool power_offsets = type == OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER;
-  OffsetCalibration &offsets = power_offsets ? this->power_offset_phase_[phase] : this->offset_phase_[phase];
-  offsets.first_offset = first_offset;
-  offsets.second_offset = second_offset;
-  if (power_offsets) {
-    this->phase_[phase].active_power_offset_ = first_offset;
-    this->phase_[phase].reactive_power_offset_ = second_offset;
-  } else {
-    this->phase_[phase].voltage_offset_ = first_offset;
-    this->phase_[phase].current_offset_ = second_offset;
-  }
+void ATM90E32Component::write_offsets_to_registers_(uint8_t phase, int16_t voltage_offset, int16_t current_offset) {
+  // Save to runtime
+  this->offset_phase_[phase].voltage_offset_ = voltage_offset;
+  this->phase_[phase].voltage_offset_ = voltage_offset;
 
-  const uint16_t *first_registers = power_offsets ? this->power_offset_registers : this->voltage_offset_registers;
-  const uint16_t *second_registers =
-      power_offsets ? this->reactive_power_offset_registers : this->current_offset_registers;
+  // Save to flash-storable struct
+  this->offset_phase_[phase].current_offset_ = current_offset;
+  this->phase_[phase].current_offset_ = current_offset;
+
+  // Write to registers
   this->write16_(ATM90E32_REGISTER_CFGREGACCEN, 0x55AA);
-  this->write16_(first_registers[phase], static_cast<uint16_t>(first_offset));
-  this->write16_(second_registers[phase], static_cast<uint16_t>(second_offset));
+  this->write16_(voltage_offset_registers[phase], static_cast<uint16_t>(voltage_offset));
+  this->write16_(current_offset_registers[phase], static_cast<uint16_t>(current_offset));
+  this->write16_(ATM90E32_REGISTER_CFGREGACCEN, 0x0000);
+}
+
+void ATM90E32Component::write_power_offsets_to_registers_(uint8_t phase, int16_t p_offset, int16_t q_offset) {
+  // Save to runtime
+  this->phase_[phase].active_power_offset_ = p_offset;
+  this->phase_[phase].reactive_power_offset_ = q_offset;
+
+  // Save to flash-storable struct
+  this->power_offset_phase_[phase].active_power_offset = p_offset;
+  this->power_offset_phase_[phase].reactive_power_offset = q_offset;
+
+  // Write to registers
+  this->write16_(ATM90E32_REGISTER_CFGREGACCEN, 0x55AA);
+  this->write16_(this->power_offset_registers[phase], static_cast<uint16_t>(p_offset));
+  this->write16_(this->reactive_power_offset_registers[phase], static_cast<uint16_t>(q_offset));
   this->write16_(ATM90E32_REGISTER_CFGREGACCEN, 0x0000);
 }
 
@@ -983,78 +947,89 @@ void ATM90E32Component::restore_gain_calibrations_() {
   ESP_LOGW(TAG, "[CALIBRATION][%s] No stored gain calibrations found. Using config file values.", cs);
 }
 
-void ATM90E32Component::restore_offset_calibrations_(OffsetCalibrationType type) {
-  const bool power_offsets = type == OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER;
+void ATM90E32Component::restore_offset_calibrations_() {
   const char *cs = this->get_calibration_id_();
-  const LogString *name = power_offsets ? LOG_STR("power offset") : LOG_STR("offset");
-  OffsetCalibration(*offsets)[3] = power_offsets ? &this->power_offset_phase_ : &this->offset_phase_;
-  OffsetCalibration(*config_offsets)[3] =
-      power_offsets ? &this->config_power_offset_phase_ : &this->config_offset_phase_;
-  ESPPreferenceObject *preference = power_offsets ? &this->power_offset_pref_ : &this->offset_pref_;
-  bool *has_stored =
-      power_offsets ? &this->has_stored_power_offset_calibration_ : &this->has_stored_offset_calibration_;
-  bool *restored = power_offsets ? &this->restored_power_offset_calibration_ : &this->restored_offset_calibration_;
-  bool *mismatches = power_offsets ? this->power_offset_calibration_mismatch_ : this->offset_calibration_mismatch_;
-  const bool *has_first = power_offsets ? this->has_config_active_power_offset_ : this->has_config_voltage_offset_;
-  const bool *has_second = power_offsets ? this->has_config_reactive_power_offset_ : this->has_config_current_offset_;
-
   for (uint8_t i = 0; i < 3; ++i)
-    (*config_offsets)[i] = (*offsets)[i];
+    this->config_offset_phase_[i] = this->offset_phase_[i];
+
+  bool have_data = this->offset_pref_.load(&this->offset_phase_);
 
-  const bool have_data = preference->load(offsets);
   bool all_zero = true;
   if (have_data) {
-    for (const auto &phase : *offsets) {
-      if (phase.first_offset != 0 || phase.second_offset != 0) {
+    for (auto &phase : this->offset_phase_) {
+      if (phase.voltage_offset_ != 0 || phase.current_offset_ != 0) {
         all_zero = false;
         break;
       }
     }
   }
 
-  *has_stored = have_data && !all_zero;
-  *restored = false;
+  if (have_data && !all_zero) {
+    this->restored_offset_calibration_ = true;
+    for (uint8_t phase = 0; phase < 3; phase++) {
+      auto &offset = this->offset_phase_[phase];
+      bool mismatch = false;
+      if (this->has_config_voltage_offset_[phase] &&
+          offset.voltage_offset_ != this->config_offset_phase_[phase].voltage_offset_)
+        mismatch = true;
+      if (this->has_config_current_offset_[phase] &&
+          offset.current_offset_ != this->config_offset_phase_[phase].current_offset_)
+        mismatch = true;
+      if (mismatch)
+        this->offset_calibration_mismatch_[phase] = true;
+    }
+  } else {
+    for (uint8_t phase = 0; phase < 3; phase++)
+      this->offset_phase_[phase] = this->config_offset_phase_[phase];
+    ESP_LOGW(TAG, "[CALIBRATION][%s] No stored offset calibrations found. Using default values.", cs);
+  }
+
   for (uint8_t phase = 0; phase < 3; phase++) {
-    mismatches[phase] = false;
-    if (*has_stored) {
-      mismatches[phase] =
-          (has_first[phase] && (*offsets)[phase].first_offset != (*config_offsets)[phase].first_offset) ||
-          (has_second[phase] && (*offsets)[phase].second_offset != (*config_offsets)[phase].second_offset);
+    write_offsets_to_registers_(phase, this->offset_phase_[phase].voltage_offset_,
+                                this->offset_phase_[phase].current_offset_);
+  }
+}
+
+void ATM90E32Component::restore_power_offset_calibrations_() {
+  const char *cs = this->get_calibration_id_();
+  for (uint8_t i = 0; i < 3; ++i)
+    this->config_power_offset_phase_[i] = this->power_offset_phase_[i];
+
+  bool have_data = this->power_offset_pref_.load(&this->power_offset_phase_);
+
+  bool all_zero = true;
+  if (have_data) {
+    for (auto &phase : this->power_offset_phase_) {
+      if (phase.active_power_offset != 0 || phase.reactive_power_offset != 0) {
+        all_zero = false;
+        break;
+      }
     }
   }
 
-  if (!*has_stored) {
-    for (uint8_t phase = 0; phase < 3; phase++)
-      (*offsets)[phase] = (*config_offsets)[phase];
-    ESP_LOGW(TAG, "[CALIBRATION][%s] No stored %s calibrations found. Using default values.", cs, LOG_STR_ARG(name));
-  }
-
-  for (uint8_t phase = 0; phase < 3; phase++) {
-    this->write_offsets_to_registers_(phase, (*offsets)[phase].first_offset, (*offsets)[phase].second_offset, type);
-  }
-  const bool initial_values_verified = this->verify_offset_writes_(type);
-  if (initial_values_verified) {
-    const auto state = resolve_offset_restore_state(*has_stored, true, false);
-    *restored = state.restored;
-    ESP_LOGI(TAG, "[CALIBRATION][%s] %s calibration values verified.", cs, LOG_STR_ARG(name));
-    return;
-  }
-
-  this->using_saved_calibrations_ = false;
-  for (uint8_t phase = 0; phase < 3; phase++)
-    mismatches[phase] = false;
-  for (uint8_t phase = 0; phase < 3; phase++) {
-    (*offsets)[phase] = (*config_offsets)[phase];
-    this->write_offsets_to_registers_(phase, (*offsets)[phase].first_offset, (*offsets)[phase].second_offset, type);
-  }
-  const auto state = resolve_offset_restore_state(*has_stored, false, this->verify_offset_writes_(type));
-  *restored = state.restored;
-  if (state.values_verified) {
-    ESP_LOGE(TAG, "[CALIBRATION][%s] %s calibration restore failed verification; config values verified.", cs,
-             LOG_STR_ARG(name));
+  if (have_data && !all_zero) {
+    this->restored_power_offset_calibration_ = true;
+    for (uint8_t phase = 0; phase < 3; ++phase) {
+      auto &offset = this->power_offset_phase_[phase];
+      bool mismatch = false;
+      if (this->has_config_active_power_offset_[phase] &&
+          offset.active_power_offset != this->config_power_offset_phase_[phase].active_power_offset)
+        mismatch = true;
+      if (this->has_config_reactive_power_offset_[phase] &&
+          offset.reactive_power_offset != this->config_power_offset_phase_[phase].reactive_power_offset)
+        mismatch = true;
+      if (mismatch)
+        this->power_offset_calibration_mismatch_[phase] = true;
+    }
   } else {
-    ESP_LOGE(TAG, "[CALIBRATION][%s] %s calibration restore and config fallback both failed verification.", cs,
-             LOG_STR_ARG(name));
+    for (uint8_t phase = 0; phase < 3; ++phase)
+      this->power_offset_phase_[phase] = this->config_power_offset_phase_[phase];
+    ESP_LOGW(TAG, "[CALIBRATION][%s] No stored power offsets found. Using default values.", cs);
+  }
+
+  for (uint8_t phase = 0; phase < 3; ++phase) {
+    write_power_offsets_to_registers_(phase, this->power_offset_phase_[phase].active_power_offset,
+                                      this->power_offset_phase_[phase].reactive_power_offset);
   }
 }
 
@@ -1109,14 +1084,14 @@ void ATM90E32Component::clear_gain_calibrations() {
 
 void ATM90E32Component::clear_offset_calibrations() {
   const char *cs = this->get_calibration_id_();
-  if (!this->has_stored_offset_calibration_) {
+  if (!this->restored_offset_calibration_) {
     ESP_LOGI(TAG, "[CALIBRATION][%s] No stored offset calibrations to clear. Current values:", cs);
     ESP_LOGI(TAG, "[CALIBRATION][%s] --------------------------------------------------------------", cs);
     ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_voltage | offset_current |", cs);
     ESP_LOGI(TAG, "[CALIBRATION][%s] --------------------------------------------------------------", cs);
     for (uint8_t phase = 0; phase < 3; phase++) {
       ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |     %6d      |     %6d      |", cs, 'A' + phase,
-               this->offset_phase_[phase].first_offset, this->offset_phase_[phase].second_offset);
+               this->offset_phase_[phase].voltage_offset_, this->offset_phase_[phase].current_offset_);
     }
     ESP_LOGI(TAG, "[CALIBRATION][%s] ==============================================================\n", cs);
     return;
@@ -1129,11 +1104,10 @@ void ATM90E32Component::clear_offset_calibrations() {
 
   for (uint8_t phase = 0; phase < 3; phase++) {
     int16_t voltage_offset =
-        this->has_config_voltage_offset_[phase] ? this->config_offset_phase_[phase].first_offset : 0;
+        this->has_config_voltage_offset_[phase] ? this->config_offset_phase_[phase].voltage_offset_ : 0;
     int16_t current_offset =
-        this->has_config_current_offset_[phase] ? this->config_offset_phase_[phase].second_offset : 0;
-    this->write_offsets_to_registers_(phase, voltage_offset, current_offset,
-                                      OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_VOLTAGE_CURRENT);
+        this->has_config_current_offset_[phase] ? this->config_offset_phase_[phase].current_offset_ : 0;
+    this->write_offsets_to_registers_(phase, voltage_offset, current_offset);
     ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |     %6d      |     %6d      |", cs, 'A' + phase, voltage_offset,
              current_offset);
   }
@@ -1143,7 +1117,6 @@ void ATM90E32Component::clear_offset_calibrations() {
   this->offset_pref_.save(&zero_offsets);  // Clear stored values in flash
   global_preferences->sync();
 
-  this->has_stored_offset_calibration_ = false;
   this->restored_offset_calibration_ = false;
   for (bool &phase : this->offset_calibration_mismatch_)
     phase = false;
@@ -1153,14 +1126,15 @@ void ATM90E32Component::clear_offset_calibrations() {
 
 void ATM90E32Component::clear_power_offset_calibrations() {
   const char *cs = this->get_calibration_id_();
-  if (!this->has_stored_power_offset_calibration_) {
+  if (!this->restored_power_offset_calibration_) {
     ESP_LOGI(TAG, "[CALIBRATION][%s] No stored power offsets to clear. Current values:", cs);
     ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
     ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_active_power | offset_reactive_power |", cs);
     ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
     for (uint8_t phase = 0; phase < 3; phase++) {
       ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |       %6d        |        %6d        |", cs, 'A' + phase,
-               this->power_offset_phase_[phase].first_offset, this->power_offset_phase_[phase].second_offset);
+               this->power_offset_phase_[phase].active_power_offset,
+               this->power_offset_phase_[phase].reactive_power_offset);
     }
     ESP_LOGI(TAG, "[CALIBRATION][%s] =====================================================================\n", cs);
     return;
@@ -1173,21 +1147,20 @@ void ATM90E32Component::clear_power_offset_calibrations() {
 
   for (uint8_t phase = 0; phase < 3; phase++) {
     int16_t active_offset =
-        this->has_config_active_power_offset_[phase] ? this->config_power_offset_phase_[phase].first_offset : 0;
-    int16_t reactive_offset =
-        this->has_config_reactive_power_offset_[phase] ? this->config_power_offset_phase_[phase].second_offset : 0;
-    this->write_offsets_to_registers_(phase, active_offset, reactive_offset,
-                                      OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER);
+        this->has_config_active_power_offset_[phase] ? this->config_power_offset_phase_[phase].active_power_offset : 0;
+    int16_t reactive_offset = this->has_config_reactive_power_offset_[phase]
+                                  ? this->config_power_offset_phase_[phase].reactive_power_offset
+                                  : 0;
+    this->write_power_offsets_to_registers_(phase, active_offset, reactive_offset);
     ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |       %6d        |        %6d        |", cs, 'A' + phase, active_offset,
              reactive_offset);
   }
   ESP_LOGI(TAG, "[CALIBRATION][%s] =====================================================================\n", cs);
 
-  OffsetCalibration zero_power_offsets[3]{{0, 0}, {0, 0}, {0, 0}};
+  PowerOffsetCalibration zero_power_offsets[3]{{0, 0}, {0, 0}, {0, 0}};
   this->power_offset_pref_.save(&zero_power_offsets);
   global_preferences->sync();
 
-  this->has_stored_power_offset_calibration_ = false;
   this->restored_power_offset_calibration_ = false;
   for (bool &phase : this->power_offset_calibration_mismatch_)
     phase = false;
@@ -1242,31 +1215,6 @@ bool ATM90E32Component::verify_gain_writes_() {
   return success;  // Return true if all writes were successful, false otherwise
 }
 
-bool ATM90E32Component::verify_offset_writes_(OffsetCalibrationType type) {
-  const bool power_offsets = type == OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER;
-  const char *cs = this->get_calibration_id_();
-  const LogString *name = offset_calibration_name(power_offsets);
-  const LogString *first_name = power_offsets ? LOG_STR("active") : LOG_STR("voltage");
-  const LogString *second_name = power_offsets ? LOG_STR("reactive") : LOG_STR("current");
-  const OffsetCalibration *offsets = power_offsets ? this->power_offset_phase_ : this->offset_phase_;
-  const uint16_t *first_registers = power_offsets ? this->power_offset_registers : this->voltage_offset_registers;
-  const uint16_t *second_registers =
-      power_offsets ? this->reactive_power_offset_registers : this->current_offset_registers;
-  bool success = true;
-  for (uint8_t phase = 0; phase < 3; phase++) {
-    const uint16_t first = this->read16_(first_registers[phase]);
-    const uint16_t second = this->read16_(second_registers[phase]);
-    if (!offset_register_value_matches(first, offsets[phase].first_offset) ||
-        !offset_register_value_matches(second, offsets[phase].second_offset)) {
-      ESP_LOGE(TAG, "[CALIBRATION][%s] %s readback failed for Phase %s: %s %d/%d, %s %d/%d.", cs, LOG_STR_ARG(name),
-               phase_labels[phase], LOG_STR_ARG(first_name), static_cast<int16_t>(first), offsets[phase].first_offset,
-               LOG_STR_ARG(second_name), static_cast<int16_t>(second), offsets[phase].second_offset);
-      success = false;
-    }
-  }
-  return success;
-}
-
 #ifdef USE_TEXT_SENSOR
 void ATM90E32Component::check_phase_status() {
   uint16_t state0 = this->read16_(ATM90E32_REGISTER_EMMSTATE0);

esphome/components/atm90e32/atm90e32.h

@@ -13,40 +13,6 @@
 
 namespace esphome::atm90e32 {
 
-inline bool offset_register_value_matches(uint16_t actual, int16_t expected) {
-  return actual == static_cast<uint16_t>(expected);
-}
-
-struct OffsetCalibration {
-  int16_t first_offset{0};
-  int16_t second_offset{0};
-};
-
-static_assert(sizeof(OffsetCalibration[3]) == 12, "Offset calibration preference layout must remain compatible");
-
-enum class OffsetCalibrationType : uint8_t {
-  OFFSET_CALIBRATION_TYPE_VOLTAGE_CURRENT,
-  OFFSET_CALIBRATION_TYPE_POWER,
-};
-
-struct OffsetRestoreState {
-  bool restored;
-  bool values_verified;
-};
-
-inline OffsetRestoreState resolve_offset_restore_state(bool has_stored_values, bool initial_values_verified,
-                                                       bool fallback_values_verified) {
-  if (initial_values_verified)
-    return {has_stored_values, true};
-  return {false, fallback_values_verified};
-}
-
-inline void prepare_offset_rollback(const OffsetCalibration (&previous)[3], bool had_stored_values,
-                                    OffsetCalibration (&rollback)[3]) {
-  for (uint8_t phase = 0; phase < 3; phase++)
-    rollback[phase] = had_stored_values ? previous[phase] : OffsetCalibration{};
-}
-
 class ATM90E32Component final : public PollingComponent,
                                 public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_HIGH,
                                                       spi::CLOCK_PHASE_TRAILING, spi::DATA_RATE_1MHZ> {
@@ -105,19 +71,19 @@ class ATM90E32Component final : public PollingComponent,
     this->has_config_current_gain_[phase] = true;
   }
   void set_voltage_offset(uint8_t phase, int16_t offset) {
-    this->offset_phase_[phase].first_offset = offset;
+    this->offset_phase_[phase].voltage_offset_ = offset;
     this->has_config_voltage_offset_[phase] = true;
   }
   void set_current_offset(uint8_t phase, int16_t offset) {
-    this->offset_phase_[phase].second_offset = offset;
+    this->offset_phase_[phase].current_offset_ = offset;
     this->has_config_current_offset_[phase] = true;
   }
   void set_active_power_offset(uint8_t phase, int16_t offset) {
-    this->power_offset_phase_[phase].first_offset = offset;
+    this->power_offset_phase_[phase].active_power_offset = offset;
     this->has_config_active_power_offset_[phase] = true;
   }
   void set_reactive_power_offset(uint8_t phase, int16_t offset) {
-    this->power_offset_phase_[phase].second_offset = offset;
+    this->power_offset_phase_[phase].reactive_power_offset = offset;
     this->has_config_reactive_power_offset_[phase] = true;
   }
   void set_freq_sensor(sensor::Sensor *freq_sensor) { freq_sensor_ = freq_sensor; }
@@ -205,16 +171,16 @@ class ATM90E32Component final : public PollingComponent,
   float get_chip_temperature_();
   bool get_publish_interval_flag_() { return publish_interval_flag_; };
   void set_publish_interval_flag_(bool flag) { publish_interval_flag_ = flag; };
-  void restore_offset_calibrations_(OffsetCalibrationType type);
+  void restore_offset_calibrations_();
+  void restore_power_offset_calibrations_();
   void restore_gain_calibrations_();
+  void save_offset_calibration_to_memory_();
   void save_gain_calibration_to_memory_();
-  void finish_offset_calibration_(const OffsetCalibration (&previous)[3], bool previous_restored,
-                                  bool previous_using_saved, OffsetCalibrationType type);
-  void write_offsets_to_registers_(uint8_t phase, int16_t first_offset, int16_t second_offset,
-                                   OffsetCalibrationType type);
+  void save_power_offset_calibration_to_memory_();
+  void write_offsets_to_registers_(uint8_t phase, int16_t voltage_offset, int16_t current_offset);
+  void write_power_offsets_to_registers_(uint8_t phase, int16_t p_offset, int16_t q_offset);
   void write_gains_to_registers_();
   bool verify_gain_writes_();
-  bool verify_offset_writes_(OffsetCalibrationType type);
   bool validate_spi_read_(uint16_t expected, const char *context = nullptr);
   void log_calibration_status_();
   const char *get_calibration_id_();
@@ -253,10 +219,19 @@ class ATM90E32Component final : public PollingComponent,
     uint32_t cumulative_reverse_active_energy_{0};
   } phase_[3];
 
-  OffsetCalibration offset_phase_[3];
+  struct OffsetCalibration {
+    int16_t voltage_offset_{0};
+    int16_t current_offset_{0};
+  } offset_phase_[3];
+
   OffsetCalibration config_offset_phase_[3];
-  OffsetCalibration power_offset_phase_[3];
-  OffsetCalibration config_power_offset_phase_[3];
+
+  struct PowerOffsetCalibration {
+    int16_t active_power_offset{0};
+    int16_t reactive_power_offset{0};
+  } power_offset_phase_[3];
+
+  PowerOffsetCalibration config_power_offset_phase_[3];
 
   struct GainCalibration {
     uint16_t voltage_gain{1};
@@ -290,8 +265,6 @@ class ATM90E32Component final : public PollingComponent,
   bool enable_offset_calibration_{false};
   bool enable_gain_calibration_{false};
   const char *instance_id_{nullptr};
-  bool has_stored_offset_calibration_{false};
-  bool has_stored_power_offset_calibration_{false};
   bool restored_offset_calibration_{false};
   bool restored_power_offset_calibration_{false};
   bool restored_gain_calibration_{false};

esphome/components/audio/audio_decoder.cpp

@@ -313,10 +313,9 @@ FileDecoderState AudioDecoder::decode_mp3_() {
       this->output_transfer_buffer_->increase_buffer_length(
           this->audio_stream_info_.value().frames_to_bytes(samples_decoded));
     }
-  } else if (result == micro_mp3::MP3_STREAM_INFO_READY || result == micro_mp3::MP3_STREAM_INFO_CHANGED) {
-    // Header parsed: capture stream info and resize the output buffer to fit one full frame.
-    // microMP3 always outputs 16-bit PCM. MP3_STREAM_INFO_CHANGED is handled identically: despite its
-    // negative value it is documented as recoverable, so it must not reach the catch-all below.
+  } else if (result == micro_mp3::MP3_STREAM_INFO_READY) {
+    // First successful header parse: capture stream info and resize the output buffer to fit one full frame.
+    // microMP3 always outputs 16-bit PCM.
     this->audio_stream_info_ =
         audio::AudioStreamInfo(16, this->mp3_decoder_->get_channels(), this->mp3_decoder_->get_sample_rate());
     this->free_buffer_required_ =

esphome/components/ble_client/automation.h

@@ -22,23 +22,6 @@ class Automation {
   static const char *const TAG;
 };
 
-// Base for nodes that never read the parent's services.
-// The parent releases its services only once every node reports Established, so a node that never
-// reports it keeps that memory allocated for the life of the connection.
-class BLEClientServicelessNode : public BLEClientNode {
- public:
-  // Final so that Established is always reported on SEARCH_CMPL, before the derived node sees the event.
-  void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) final {
-    if (event == ESP_GATTC_SEARCH_CMPL_EVT)
-      this->node_state = espbt::ClientState::ESTABLISHED;
-    this->on_gattc_event(event, gattc_if, param);
-  }
-
- protected:
-  // Derived nodes handle GATT events here rather than by overriding the handler above.
-  virtual void on_gattc_event(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) {}
-};
-
 // implement on_connect automation.
 class BLEClientConnectTrigger final : public Trigger<>, public BLEClientNode {
  public:
@@ -78,7 +61,7 @@ class BLEClientDisconnectTrigger final : public Trigger<>, public BLEClientNode
   }
 };
 
-class BLEClientPasskeyRequestTrigger final : public Trigger<>, public BLEClientServicelessNode {
+class BLEClientPasskeyRequestTrigger final : public Trigger<>, public BLEClientNode {
  public:
   explicit BLEClientPasskeyRequestTrigger(BLEClient *parent) { parent->register_ble_node(this); }
   void loop() override {}
@@ -88,7 +71,7 @@ class BLEClientPasskeyRequestTrigger final : public Trigger<>, public BLEClientS
   }
 };
 
-class BLEClientPasskeyNotificationTrigger final : public Trigger<uint32_t>, public BLEClientServicelessNode {
+class BLEClientPasskeyNotificationTrigger final : public Trigger<uint32_t>, public BLEClientNode {
  public:
   explicit BLEClientPasskeyNotificationTrigger(BLEClient *parent) { parent->register_ble_node(this); }
   void loop() override {}
@@ -99,7 +82,7 @@ class BLEClientPasskeyNotificationTrigger final : public Trigger<uint32_t>, publ
   }
 };
 
-class BLEClientNumericComparisonRequestTrigger final : public Trigger<uint32_t>, public BLEClientServicelessNode {
+class BLEClientNumericComparisonRequestTrigger final : public Trigger<uint32_t>, public BLEClientNode {
  public:
   explicit BLEClientNumericComparisonRequestTrigger(BLEClient *parent) { parent->register_ble_node(this); }
   void loop() override {}
@@ -332,17 +315,19 @@ template<typename... Ts> class BLEClientRemoveBondAction final : public Action<T
   BLEClient *parent_{nullptr};
 };
 
-template<typename... Ts> class BLEClientConnectAction final : public Action<Ts...>, public BLEClientServicelessNode {
+template<typename... Ts> class BLEClientConnectAction final : public Action<Ts...>, public BLEClientNode {
  public:
   BLEClientConnectAction(BLEClient *ble_client) {
     ble_client->register_ble_node(this);
     ble_client_ = ble_client;
   }
-  void on_gattc_event(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) override {
+  void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
+                           esp_ble_gattc_cb_param_t *param) override {
     if (this->num_running_ == 0)
       return;
     switch (event) {
       case ESP_GATTC_SEARCH_CMPL_EVT:
+        this->node_state = espbt::ClientState::ESTABLISHED;
         this->parent()->run_later([this]() { this->play_next_tuple_(this->var_); });
         break;
       // if the connection is closed, terminate the automation chain.
@@ -379,13 +364,14 @@ template<typename... Ts> class BLEClientConnectAction final : public Action<Ts..
   std::tuple<Ts...> var_{};
 };
 
-template<typename... Ts> class BLEClientDisconnectAction final : public Action<Ts...>, public BLEClientServicelessNode {
+template<typename... Ts> class BLEClientDisconnectAction final : public Action<Ts...>, public BLEClientNode {
  public:
   BLEClientDisconnectAction(BLEClient *ble_client) {
     ble_client->register_ble_node(this);
     ble_client_ = ble_client;
   }
-  void on_gattc_event(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) override {
+  void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
+                           esp_ble_gattc_cb_param_t *param) override {
     if (this->num_running_ == 0)
       return;
     switch (event) {

esphome/components/dallas_temp/dallas_temp.cpp

@@ -6,7 +6,6 @@ namespace esphome::dallas_temp {
 static const char *const TAG = "dallas.temp.sensor";
 
 static const uint8_t DALLAS_MODEL_DS18S20 = 0x10;
-static const uint8_t DALLAS_MODEL_DS18B20 = 0x28;
 static const uint8_t DALLAS_COMMAND_START_CONVERSION = 0x44;
 static const uint8_t DALLAS_COMMAND_READ_SCRATCH_PAD = 0xBE;
 static const uint8_t DALLAS_COMMAND_WRITE_SCRATCH_PAD = 0x4E;
@@ -155,14 +154,7 @@ float DallasTemperatureSensor::get_temp_c_() {
     default:
       break;
   }
-  // undocumented test for powerup measurement of 85
-  // https://github.com/cpetrich/counterfeit_DS18B20#solution-to-the-85-c-problem
-  if ((this->address_ & 0xff) == DALLAS_MODEL_DS18B20) {
-    if ((temp == 85 * 16) && (this->scratch_pad_[6] == 0xc)) {
-      ESP_LOGD(TAG, "dropping reading caused by sensor reset");
-      return NAN;
-    }
-  }
+
   return temp / 16.0f;
 }
 

esphome/components/debug/debug_esp32.cpp

@@ -66,15 +66,11 @@ const char *DebugComponent::get_reset_reason_(std::span<char, RESET_REASON_BUFFE
 
   unsigned reason = esp_reset_reason();
   if (reason < sizeof(RESET_REASONS) / sizeof(RESET_REASONS[0])) {
-    if (reason == ESP_RST_SW || reason == ESP_RST_WDT) {
-      // On some ESP32-S3 configurations (e.g. SPIRAM with fetch-instructions/rodata),
-      // esp_restart() intermittently produces RTCWDT_RTC_RST (ESP_RST_WDT) instead of
-      // ESP_RST_SW. Check the stored reboot source for both reset reasons so a software
-      // reboot that ends up as WDT still reports the correct source.
+    if (reason == ESP_RST_SW) {
       auto pref = global_preferences->make_preference(REBOOT_MAX_LEN,
                                                       fnv1_hash_extend(fnv1_hash(REBOOT_KEY), App.get_name().c_str()));
       char reboot_source[REBOOT_MAX_LEN]{};
-      if (pref.load(&reboot_source) && reboot_source[0] != '\0') {
+      if (pref.load(&reboot_source)) {
         reboot_source[REBOOT_MAX_LEN - 1] = '\0';
         snprintf(buf, size, "Reboot request from %s", reboot_source);
       } else {

esphome/components/debug/sensor.py

@@ -23,7 +23,11 @@ from esphome.const import (
 )
 from esphome.types import ConfigType
 
-from . import CONF_DEBUG_ID, FILTER_SOURCE_FILES, DebugComponent  # noqa: F401  pylint: disable=unused-import
+from . import (  # noqa: F401  pylint: disable=unused-import
+    CONF_DEBUG_ID,
+    FILTER_SOURCE_FILES,
+    DebugComponent,
+)
 
 DEPENDENCIES = ["debug"]
 

esphome/components/debug/text_sensor.py

@@ -9,7 +9,11 @@ from esphome.const import (
 )
 from esphome.types import ConfigType
 
-from . import CONF_DEBUG_ID, FILTER_SOURCE_FILES, DebugComponent  # noqa: F401  pylint: disable=unused-import
+from . import (  # noqa: F401  pylint: disable=unused-import
+    CONF_DEBUG_ID,
+    FILTER_SOURCE_FILES,
+    DebugComponent,
+)
 
 DEPENDENCIES = ["debug"]
 

esphome/components/esp32/__init__.py

@@ -10,7 +10,6 @@ import subprocess
 from typing import Any
 
 from esphome import yaml_util
-from esphome.build_helpers.pch import PCH_PREFIX_HEADER, pch_enabled, pch_extra_scripts
 import esphome.codegen as cg
 from esphome.components.const import CONF_ENABLE_OTA_DOWNGRADE_PROTECTION
 from esphome.config_helpers import filter_source_files_from_defines
@@ -58,7 +57,6 @@ from esphome.coroutine import CoroPriority, coroutine_with_priority
 from esphome.espidf.component import generate_idf_components
 import esphome.final_validate as fv
 from esphome.helpers import copy_file_if_changed, rmtree, write_file_if_changed
-from esphome.platformio.toolchain import copy_pch_script
 from esphome.schema_extractors import SCHEMA_EXTRACT, schema_extractor
 from esphome.types import ConfigType
 from esphome.writer import clean_build, clean_cmake_cache
@@ -2457,11 +2455,6 @@ async def to_code(config):
 
         cg.add_platformio_option("lib_ldf_mode", "off")
         cg.add_platformio_option("lib_compat_mode", "strict")
-        # CI-speed only: this toolchain is being dropped, so the pch gets
-        # the same curated prefix as host with no further investment
-        cg.add_platformio_option("extra_scripts", pch_extra_scripts())
-        if pch_enabled():
-            cg.add_platformio_option("build_src_flags", f"-include {PCH_PREFIX_HEADER}")
         cg.add_platformio_option("platform", conf[CONF_PLATFORM_VERSION])
         cg.add_platformio_option("board", config[CONF_BOARD])
         cg.add_platformio_option("board_upload.flash_size", config[CONF_FLASH_SIZE])
@@ -3379,8 +3372,6 @@ def _write_idf_component_yml():
 def copy_files():
     _write_sdkconfig()
     _write_idf_component_yml()
-    if not CORE.using_toolchain_esp_idf:
-        copy_pch_script()
 
     if "partitions.csv" not in CORE.data[KEY_ESP32][KEY_EXTRA_BUILD_FILES]:
         flash_size = CORE.data[KEY_ESP32][KEY_FLASH_SIZE]

esphome/components/esp32/const.py

@@ -3,11 +3,18 @@ import esphome.codegen as cg
 # Re-exported for the many esp32-side users; defined in esphome.const
 # and esphome.espidf so the upload/logs fast path can use them without
 # importing this package.
-from esphome.const import KEY_ESP32, KEY_FLASH_SIZE, KEY_IDF_VERSION, KEY_VARIANT  # noqa: F401  # pylint: disable=unused-import
+from esphome.const import (  # noqa: F401  # pylint: disable=unused-import
+    KEY_ESP32,
+    KEY_FLASH_SIZE,
+    KEY_IDF_VERSION,
+    KEY_VARIANT,
+)
 
 # Back compat for external components only; in-tree callers import it
 # from esphome.espidf directly.
-from esphome.espidf import variant_to_idf_target  # noqa: F401  # pylint: disable=unused-import
+from esphome.espidf import (  # noqa: F401  # pylint: disable=unused-import
+    variant_to_idf_target,
+)
 
 KEY_BOARD = "board"
 KEY_SDKCONFIG_OPTIONS = "sdkconfig_options"

esphome/components/esp8266/__init__.py

@@ -3,10 +3,8 @@ from pathlib import Path
 import platform
 import re
 import subprocess
-import time
 from typing import Any
 
-from esphome.build_helpers.pch import pch_extra_scripts
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.const import (
@@ -16,7 +14,6 @@ from esphome.const import (
     CONF_FRAMEWORK,
     CONF_PLATFORM_VERSION,
     CONF_SOURCE,
-    CONF_TOOLCHAIN,
     CONF_VERSION,
     KEY_CORE,
     KEY_FRAMEWORK_VERSION,
@@ -24,7 +21,6 @@ from esphome.const import (
     KEY_TARGET_PLATFORM,
     PLATFORM_ESP8266,
     ThreadModel,
-    Toolchain,
 )
 from esphome.core import (
     CORE,
@@ -35,13 +31,12 @@ from esphome.core import (
 )
 from esphome.core.config import BOARD_MAX_LENGTH
 from esphome.helpers import IS_MACOS, copy_file_if_changed
-from esphome.platformio.toolchain import copy_ccache_script, copy_pch_script
+from esphome.platformio.toolchain import copy_ccache_script
 from esphome.storage_json import StorageJSON
 from esphome.types import ConfigType
 
-from .boards import BOARDS, ESP8266_BOARD_BUILD, board_ld_script
+from .boards import BOARDS, board_ld_script
 from .const import (
-    BUILD_FLASH_MODES,
     CONF_EARLY_PIN_INIT,
     CONF_ENABLE_SERIAL,
     CONF_ENABLE_SERIAL1,
@@ -49,7 +44,6 @@ from .const import (
     KEY_BOARD,
     KEY_ESP8266,
     KEY_PIN_INITIAL_STATES,
-    KEY_SCANF_FLOAT,
     KEY_SERIAL1_REQUIRED,
     KEY_SERIAL_REQUIRED,
     KEY_WAVEFORM_REQUIRED,
@@ -109,53 +103,6 @@ def set_core_data(config: ConfigType) -> ConfigType:
     return config
 
 
-_TOOLCHAINS = (Toolchain.PLATFORMIO, Toolchain.ARDUINO)
-_validate_toolchain = cv.toolchain_enum(_TOOLCHAINS)
-_resolve_toolchain = cv.resolve_toolchain("ESP8266", _TOOLCHAINS, Toolchain.PLATFORMIO)
-
-
-def _validate_native_toolchain(config: ConfigType) -> ConfigType:
-    """Constraints of the native (non-PlatformIO) Arduino toolchain."""
-    if not CORE.using_toolchain_arduino:
-        return config
-    from esphome.arduino8266.framework import MIN_FRAMEWORK_VERSION
-
-    conf = config[CONF_FRAMEWORK]
-    version = cv.Version.parse(conf[CONF_VERSION])
-    if version < MIN_FRAMEWORK_VERSION:
-        raise cv.Invalid(
-            "'toolchain: arduino' requires framework version "
-            f"{MIN_FRAMEWORK_VERSION} or newer"
-        )
-    # platform_version is a PlatformIO concept; drop it (as esp32's native
-    # toolchain does), warning when a custom pin is discarded. The floor
-    # above guarantees the schema-derived default is the ARDUINO_4 spec.
-    if (
-        conf.pop(CONF_PLATFORM_VERSION, _ARDUINO_4_PLATFORM_SPEC)
-        != _ARDUINO_4_PLATFORM_SPEC
-    ):
-        _LOGGER.warning(
-            "'platform_version' is ignored by 'toolchain: arduino'; the native "
-            "toolchain downloads the framework and compiler directly"
-        )
-    if conf[CONF_SOURCE] != _format_framework_arduino_version(version):
-        raise cv.Invalid(
-            "'toolchain: arduino' does not support a custom framework source; "
-            "use 'toolchain: platformio'"
-        )
-    # BOARDS is a subset of ESP8266_BOARD_BUILD today; the second clause is
-    # a drift guard for the independently regenerated tables
-    if (
-        config[CONF_BOARD] not in BOARDS
-        or config[CONF_BOARD] not in ESP8266_BOARD_BUILD
-    ):
-        raise cv.Invalid(
-            f"Board '{config[CONF_BOARD]}' is not supported by "
-            "'toolchain: arduino'; use 'toolchain: platformio'"
-        )
-    return config
-
-
 def get_download_types(storage_json: StorageJSON) -> list[dict[str, str]]:
     """Binary-download entries for a built ESP8266 firmware.
 
@@ -185,7 +132,7 @@ def _format_framework_arduino_version(ver: cv.Version) -> str:
     # a PIO platformio/framework-arduinoespressif8266 value
     # List of package versions: https://api.registry.platformio.org/v3/packages/platformio/tool/framework-arduinoespressif8266
     # Same encoding the native toolchain uses for its package download, so a
-    # custom-source check against this value cannot drift from what it fetches.
+    # version bump cannot drift between the two paths.
     from esphome.arduino8266.framework import framework_package_version
 
     try:
@@ -247,7 +194,7 @@ def _arduino_check_versions(value: ConfigType) -> ConfigType:
     platform_version = value.get(CONF_PLATFORM_VERSION)
     if platform_version is None:
         if version >= cv.Version(3, 1, 0):
-            platform_version = _ARDUINO_4_PLATFORM_SPEC
+            platform_version = _parse_platform_version(str(ARDUINO_4_PLATFORM_VERSION))
         else:
             platform_version = _parse_platform_version(str(ARDUINO_3_PLATFORM_VERSION))
     value[CONF_PLATFORM_VERSION] = platform_version
@@ -270,10 +217,6 @@ def _parse_platform_version(value: Any) -> str:
         return value
 
 
-# The platform_version derived for every core >= 3.1.0 config
-_ARDUINO_4_PLATFORM_SPEC = _parse_platform_version(str(ARDUINO_4_PLATFORM_VERSION))
-
-
 ARDUINO_FRAMEWORK_SCHEMA = cv.All(
     cv.Schema(
         {
@@ -290,6 +233,7 @@ ARDUINO_FRAMEWORK_SCHEMA = cv.All(
 )
 
 
+BUILD_FLASH_MODES = ["qio", "qout", "dio", "dout"]
 CONFIG_SCHEMA = cv.All(
     cv.Schema(
         {
@@ -306,30 +250,15 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_ENABLE_SERIAL1): cv.boolean,
             cv.Optional(CONF_ENABLE_FULL_PRINTF, default=False): cv.boolean,
             cv.Optional(CONF_ENABLE_SCANF_FLOAT): cv.boolean,
-            cv.Optional(
-                CONF_TOOLCHAIN, visibility=cv.Visibility.ADVANCED
-            ): _validate_toolchain,
         }
     ),
-    _resolve_toolchain,
-    _validate_native_toolchain,
+    # Until the native toolchain lands, PlatformIO is the only backend;
+    # reject a --toolchain this platform cannot serve yet.
+    cv.require_platformio_toolchain("ESP8266"),
     set_core_data,
 )
 
 
-def native_toolchain_module():
-    """The native build backend for the resolved toolchain, if any.
-
-    ``__main__`` dispatches from its own toolchain-keyed table; this helper
-    serves the component's internal callers.
-    """
-    if not CORE.using_toolchain_arduino:
-        return None
-    from esphome.arduino8266 import toolchain
-
-    return toolchain
-
-
 def check_rosetta() -> None:
     """Fail fast when the x86_64 ESP8266 toolchain cannot run on this Mac.
 
@@ -365,13 +294,12 @@ def _choose_ld_script(board: str) -> str:
 
 @coroutine_with_priority(CoroPriority.PLATFORM)
 async def to_code(config: ConfigType) -> None:
-    use_platformio = CORE.using_toolchain_platformio
     cg.add(esp8266_ns.setup_preferences())
 
-    if use_platformio:
-        cg.add_platformio_option("lib_ldf_mode", "off")
-        cg.add_platformio_option("lib_compat_mode", "strict")
-        cg.add_platformio_option("board", config[CONF_BOARD])
+    cg.add_platformio_option("lib_ldf_mode", "off")
+    cg.add_platformio_option("lib_compat_mode", "strict")
+
+    cg.add_platformio_option("board", config[CONF_BOARD])
     cg.add_build_flag("-DUSE_ESP8266")
     cg.set_cpp_standard("gnu++20")
     cg.add_define("ESPHOME_BOARD", config[CONF_BOARD])
@@ -387,33 +315,28 @@ async def to_code(config: ConfigType) -> None:
             "enabling scanf float support (~8KB flash)"
         )
 
-    # The native generator reads the same decision (KEY_SCANF_FLOAT)
-    CORE.data[KEY_ESP8266][KEY_SCANF_FLOAT] = bool(enable_scanf_float)
-    if use_platformio:
-        extra_scripts = [
-            "pre:ccache.py",
-            "pre:testing_mode.py",
-            "pre:exclude_updater.py",
-            "pre:exclude_waveform.py",
-            "pre:relocate_ratetable.py",
-        ]
-        if not enable_scanf_float:
-            extra_scripts.append("pre:remove_float_scanf.py")
-        extra_scripts.extend(pch_extra_scripts())
-        extra_scripts.append("post:post_build.py")
-        cg.add_platformio_option("extra_scripts", extra_scripts)
+    extra_scripts = [
+        "pre:ccache.py",
+        "pre:testing_mode.py",
+        "pre:exclude_updater.py",
+        "pre:exclude_waveform.py",
+        "pre:relocate_ratetable.py",
+    ]
+    if not enable_scanf_float:
+        extra_scripts.append("pre:remove_float_scanf.py")
+    extra_scripts.append("post:post_build.py")
+    cg.add_platformio_option("extra_scripts", extra_scripts)
 
     conf = config[CONF_FRAMEWORK]
+    cg.add_platformio_option("framework", "arduino")
     cg.add_build_flag("-DUSE_ARDUINO")
     cg.add_build_flag("-DUSE_ESP8266_FRAMEWORK_ARDUINO")
     cg.add_build_flag("-Wno-nonnull-compare")
-    if use_platformio:
-        cg.add_platformio_option("framework", "arduino")
-        cg.add_platformio_option("platform", conf[CONF_PLATFORM_VERSION])
-        cg.add_platformio_option(
-            "platform_packages",
-            [f"platformio/framework-arduinoespressif8266@{conf[CONF_SOURCE]}"],
-        )
+    cg.add_platformio_option("platform", conf[CONF_PLATFORM_VERSION])
+    cg.add_platformio_option(
+        "platform_packages",
+        [f"platformio/framework-arduinoespressif8266@{conf[CONF_SOURCE]}"],
+    )
 
     # Default for platformio is LWIP2_LOW_MEMORY with:
     #  - MSS=536
@@ -451,8 +374,7 @@ async def to_code(config: ConfigType) -> None:
     # Force-include inline std::__throw_* overrides so GCC dead-strips the unused
     # libstdc++ error message strings (e.g. "basic_string::_M_create") from DRAM.
     # See throw_stubs.h for details. Must be prepended before <string>, so this
-    # uses build_src_flags with -include. Unconditional: the native build
-    # generator reads the same option, keeping one source of truth.
+    # uses build_src_flags with -include.
     cg.add_platformio_option(
         "build_src_flags", "-include esphome/components/esp8266/throw_stubs.h"
     )
@@ -482,8 +404,6 @@ async def to_code(config: ConfigType) -> None:
     # implementation in the Arduino ESP8266 core.
     cg.add_build_flag("-Wl,--wrap=millis")
 
-    # Unconditional: the native build generator reads the same option,
-    # keeping one source of truth
     cg.add_platformio_option("board_build.flash_mode", config[CONF_BOARD_FLASH_MODE])
 
     ver: cv.Version = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
@@ -492,7 +412,7 @@ async def to_code(config: ConfigType) -> None:
         cg.RawExpression(f"VERSION_CODE({ver.major}, {ver.minor}, {ver.patch})"),
     )
 
-    if use_platformio and config[CONF_BOARD] in BOARDS:
+    if config[CONF_BOARD] in BOARDS:
         cg.add_platformio_option(
             "board_build.ldscript", _choose_ld_script(config[CONF_BOARD])
         )
@@ -533,24 +453,8 @@ async def finalize_serial_config() -> None:
         cg.add_build_flag("-DNO_GLOBAL_SERIAL1")
 
 
-# Called by __main__.compile_program; returning False falls through to the
-# PlatformIO toolchain.
-def run_compile(args, config: ConfigType) -> bool:
-    # Positive check: the native backend only runs when explicitly resolved
-    toolchain = native_toolchain_module()
-    if toolchain is None:
-        return False
-    if toolchain.run_compile(config, CORE.verbose) != 0:
-        raise EsphomeError("ESP8266 native build failed")
-    return True
-
-
 # Called by writer.py
 def copy_files() -> None:
-    # Native builds skip the PlatformIO extra scripts; the build generator
-    # carries their logic
-    if CORE.using_toolchain_arduino:
-        return
     dir = Path(__file__).parent
     for script in (
         "post_build",
@@ -565,7 +469,6 @@ def copy_files() -> None:
             CORE.relative_build_path(f"{script}.py"),
         )
     copy_ccache_script()
-    copy_pch_script()
 
 
 # ESP logs stack trace decoder, based on https://github.com/me-no-dev/EspExceptionDecoder
@@ -608,75 +511,22 @@ ESP8266_EXCEPTION_CODES = {
 }
 
 
-_DECODE_WARNED_AT: dict[str, float] = {}
+def _decode_pc(config: ConfigType, addr: str) -> None:
+    from esphome.platformio import toolchain
 
-
-def _warn_decode_problem(key: str, message: str, *args) -> bool:
-    """Warn, deduplicated briefly so a burst of stack-dump addresses warns
-    once but a later dump warns again; returns whether it warned so the
-    caller can mark suppressed addresses individually."""
-    now = time.monotonic()
-    last = _DECODE_WARNED_AT.get(key)
-    if last is not None and now - last < 30:
-        return False
-    _DECODE_WARNED_AT[key] = now
-    _LOGGER.warning(message, *args)
-    return True
-
-
-def _decode_pc(config: ConfigType, addr: str, *, bulk: bool = False) -> None:
-    """Decode one crash address. ``bulk``: the caller is scanning every
-    8-hex stack word, most of which are not code addresses -- unmappable
-    ones log at debug so real frames are not buried."""
-    if (native_toolchain := native_toolchain_module()) is not None:
-        addr2line = native_toolchain.get_addr2line_path()
-        elf = native_toolchain.get_elf_path()
-        for path in (addr2line, elf):
-            if not path.is_file():
-                _warn_decode_problem(
-                    str(path), "Cannot decode crash addresses: %s missing", path
-                )
-                # The detailed warning names no address; mark named
-                # registers, but bulk stack words at debug (~150 per dump)
-                log = _LOGGER.debug if bulk else _LOGGER.warning
-                log("Not decoded %s (toolchain file missing)", addr)
-                return
-        addr2line, elf = str(addr2line), str(elf)
-    else:
-        from esphome.platformio import toolchain
-
-        idedata = toolchain.get_idedata(config)
-        if not idedata.addr2line_path or not idedata.firmware_elf_path:
-            _warn_decode_problem(
-                "no-addr2line",
-                "Cannot decode crash addresses: no addr2line or ELF in idedata",
-            )
-            log = _LOGGER.debug if bulk else _LOGGER.warning
-            log("Not decoded %s (no addr2line or ELF)", addr)
-            return
-        addr2line, elf = idedata.addr2line_path, idedata.firmware_elf_path
-    command = [addr2line, "-pfiaC", "-e", elf, addr]
+    idedata = toolchain.get_idedata(config)
+    if not idedata.addr2line_path or not idedata.firmware_elf_path:
+        _LOGGER.debug("decode_pc no addr2line")
+        return
+    command = [idedata.addr2line_path, "-pfiaC", "-e", idedata.firmware_elf_path, addr]
     try:
         translation = subprocess.check_output(command, close_fds=False).decode().strip()
-    except Exception as err:  # noqa: BLE001  # pylint: disable=broad-except
-        # Warn, not debug: a failing addr2line must be visible. The warning
-        # is rate-limited across a dump, so mark every undecoded address
-        # inline or the rest read as merely unmappable
-        if not _warn_decode_problem(
-            "addr2line-failed", "Could not decode crash address %s (%s)", addr, err
-        ):
-            # The detailed warning already named this address; mark only
-            # the rate-limited ones, and bulk stack words at debug
-            log = _LOGGER.debug if bulk else _LOGGER.warning
-            log("Not decoded %s (addr2line failed)", addr)
+    except Exception:  # noqa: BLE001  # pylint: disable=broad-except
         _LOGGER.debug("Caught exception for command %s", command, exc_info=1)
         return
 
     if "?? ??:0" in translation:
-        # A named register that fails to decode is confusing silence; a
-        # bulk stack word failing is the expected common case
-        log = _LOGGER.debug if bulk else _LOGGER.warning
-        log("Not decoded %s (address not in %s)", addr, elf)
+        # Nothing useful
         return
     translation = translation.replace(" at ??:?", "").replace(":?", "")
     _LOGGER.warning("Decoded %s", translation)
@@ -746,6 +596,6 @@ def process_stacktrace(config: ConfigType, line: str, backtrace_state: bool) ->
 
     if backtrace_state:
         for addr in re.finditer(STACKTRACE_ESP8266_BACKTRACE_PC_RE, line):
-            _decode_pc(config, addr.group(), bulk=True)
+            _decode_pc(config, addr.group())
 
     return backtrace_state

esphome/components/esp8266/const.py

@@ -16,6 +16,7 @@ KEY_WAVEFORM_REQUIRED = "waveform_required"
 KEY_SERIAL_REQUIRED = "serial_required"
 KEY_SERIAL1_REQUIRED = "serial1_required"
 # Set for the native (non-PlatformIO) toolchain's build generator
+KEY_FLASH_MODE = "flash_mode"
 KEY_SCANF_FLOAT = "scanf_float"
 # Per-board flash-layout override consumed by board_ld_script()
 KEY_LDSCRIPT = "ldscript"
@@ -72,6 +73,3 @@ def enable_serial1() -> None:
             enable_serial1()
     """
     CORE.data.setdefault(KEY_ESP8266, {})[KEY_SERIAL1_REQUIRED] = True
-
-
-BUILD_FLASH_MODES = ("qio", "qout", "dio", "dout")

esphome/components/host/__init__.py

@@ -1,4 +1,3 @@
-from esphome.build_helpers.pch import PCH_PREFIX_HEADER, pch_enabled, pch_extra_scripts
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.const import (
@@ -11,7 +10,7 @@ from esphome.const import (
     ThreadModel,
 )
 from esphome.core import CORE
-from esphome.platformio.toolchain import copy_ccache_script, copy_pch_script
+from esphome.platformio.toolchain import copy_ccache_script
 from esphome.types import ConfigType
 
 from .const import KEY_HOST
@@ -56,18 +55,9 @@ async def to_code(config: ConfigType) -> None:
     cg.add_platformio_option("platform", "platformio/native")
     cg.add_platformio_option("lib_ldf_mode", "off")
     cg.add_platformio_option("lib_compat_mode", "strict")
-    cg.add_platformio_option("extra_scripts", ["pre:ccache.py", *pch_extra_scripts()])
-    if pch_enabled():
-        # Curated prefix for the pch (the script folds it plus defines.h):
-        # host has no framework force-includes, and the per-TU cost is the
-        # STL closure behind the core headers. Measured -43% compile CPU.
-        # Gated so ESPHOME_PCH_ENABLE=0 restores the strict view. When the
-        # .gch fails to build or load, the force-include stays and every TU
-        # parses the closure as text: correct, but slower than no pch.
-        cg.add_platformio_option("build_src_flags", f"-include {PCH_PREFIX_HEADER}")
+    cg.add_platformio_option("extra_scripts", ["pre:ccache.py"])
 
 
 # Called by writer.py
 def copy_files() -> None:
     copy_ccache_script()
-    copy_pch_script()

esphome/components/i2s_audio/speaker/i2s_audio_speaker.cpp

@@ -91,14 +91,7 @@ void I2SAudioSpeakerBase::loop() {
     this->speaker_task_handle_ = nullptr;
 
     this->stop_i2s_driver_();
-    // ALL_BITS includes COMMAND_START. Take the bits from the clear itself, not from the snapshot at
-    // the top of loop(): the audio source's task can raise a start at any point above, including
-    // during stop_i2s_driver_(), and nothing would ever re-issue it.
-    const EventBits_t bits_before_clear = xEventGroupClearBits(this->event_group_, SpeakerEventGroupBits::ALL_BITS);
-    if (bits_before_clear & SpeakerEventGroupBits::COMMAND_START) {
-      ESP_LOGD(TAG, "Start requested while stopping; keeping the request");
-      xEventGroupSetBits(this->event_group_, SpeakerEventGroupBits::COMMAND_START);
-    }
+    xEventGroupClearBits(this->event_group_, SpeakerEventGroupBits::ALL_BITS);
     this->status_clear_error();
 
     this->on_task_stopped();

esphome/components/libretiny/__init__.py

@@ -2,7 +2,6 @@ import json
 import logging
 from pathlib import Path
 
-from esphome.build_helpers.pch import pch_extra_scripts
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.const import (
@@ -27,7 +26,7 @@ from esphome.const import (
 from esphome.core import CORE
 from esphome.core.config import BOARD_MAX_LENGTH
 from esphome.helpers import copy_file_if_changed
-from esphome.platformio.toolchain import copy_ccache_script, copy_pch_script
+from esphome.platformio.toolchain import copy_ccache_script
 from esphome.storage_json import StorageJSON
 
 from . import gpio  # noqa: F401
@@ -514,7 +513,7 @@ async def component_to_code(config):
         # it for project source files only. GCC uses the last -O flag.
         build_src_flags += " -Os"
     cg.add_platformio_option("build_src_flags", build_src_flags)
-    cg.add_platformio_option("extra_scripts", ["pre:ccache.py", *pch_extra_scripts()])
+    cg.add_platformio_option("extra_scripts", ["pre:ccache.py"])
     # IRAM_ATTR is a no-op on BK72xx (SDK masks FIQ+IRQ around flash ops).
     # On other families, patch_linker.py routes .sram.text into the right
     # RAM-executable output section and prints a post-link placement summary.
@@ -620,4 +619,3 @@ def copy_files() -> None:
         CORE.relative_build_path("patch_linker.py"),
     )
     copy_ccache_script()
-    copy_pch_script()

esphome/components/logger/logger_esp32.cpp

@@ -5,7 +5,6 @@
 #include <esp_log.h>
 
 #include <driver/uart.h>
-#include <soc/soc_caps.h>
 
 #ifdef USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG
 #include <driver/usb_serial_jtag.h>
@@ -77,11 +76,7 @@ void init_uart(uart_port_t uart_num, uint32_t baud_rate, int tx_buffer_size) {
   uart_config.parity = UART_PARITY_DISABLE;
   uart_config.stop_bits = UART_STOP_BITS_1;
   uart_config.flow_ctrl = UART_HW_FLOWCTRL_DISABLE;
-#if SOC_UART_SUPPORT_XTAL_CLK
-  uart_config.source_clk = UART_SCLK_XTAL;
-#else
   uart_config.source_clk = UART_SCLK_DEFAULT;
-#endif
   uart_param_config(uart_num, &uart_config);
   // The logger only writes to UART, never reads, so use the minimum RX buffer.
   // ESP-IDF requires rx_buffer_size > UART_HW_FIFO_LEN (128 bytes).

esphome/components/lvgl/widgets/keyboard.py

@@ -15,7 +15,6 @@ from ..defines import (
 from ..types import LvCompound, LvType
 from . import Widget, WidgetType, get_widgets
 from .buttonmatrix import CONF_BUTTONMATRIX
-from .label import CONF_LABEL
 from .textarea import CONF_TEXTAREA, lv_textarea_t
 
 CONF_KEYBOARD = "keyboard"
@@ -50,7 +49,7 @@ class KeyboardType(WidgetType):
         )
 
     def get_uses(self):
-        return CONF_KEYBOARD, CONF_TEXTAREA, CONF_BUTTONMATRIX, CONF_LABEL
+        return CONF_KEYBOARD, CONF_TEXTAREA, CONF_BUTTONMATRIX
 
     async def to_code(self, w: Widget, config: dict):
         add_lv_use("KEY_LISTENER")

esphome/components/lvgl/widgets/qrcode.py

@@ -10,7 +10,6 @@ from ..types import lv_obj_t
 from . import Widget, WidgetType
 from .canvas import CONF_CANVAS
 from .img import CONF_IMAGE
-from .label import CONF_LABEL
 
 CONF_QRCODE = "qrcode"
 CONF_DARK_COLOR = "dark_color"
@@ -42,7 +41,7 @@ class QrCodeType(WidgetType):
         )
 
     def get_uses(self):
-        return CONF_CANVAS, CONF_IMAGE, CONF_LABEL
+        return CONF_CANVAS, CONF_IMAGE
 
     async def to_code(self, w: Widget, config):
         await w.set_property(

esphome/components/lvgl/widgets/tabview.py

@@ -28,7 +28,6 @@ from ..types import LV_EVENT, LvType, ObjUpdateAction, lv_obj_t, lv_obj_t_ptr
 from . import Widget, WidgetType, add_widgets, get_widgets, set_obj_properties
 from .button import button_spec
 from .buttonmatrix import CONF_BUTTONMATRIX, buttonmatrix_spec
-from .label import CONF_LABEL
 from .obj import obj_spec
 
 CONF_TABVIEW = "tabview"
@@ -75,7 +74,7 @@ class TabviewType(WidgetType):
         )
 
     def get_uses(self):
-        return CONF_BUTTONMATRIX, TYPE_FLEX, CONF_BUTTON, CONF_LABEL
+        return CONF_BUTTONMATRIX, TYPE_FLEX, CONF_BUTTON
 
     async def to_code(self, w: Widget, config: dict):
         await w.set_property(

esphome/components/mqtt/mqtt_light.cpp

@@ -67,9 +67,6 @@ void MQTTJSONLightComponent::send_discovery(JsonObject root, mqtt::SendDiscovery
   if (traits.supports_color_mode(ColorMode::RGB_COLD_WARM_WHITE))
     color_modes.add(ESPHOME_F("rgbww"));
 
-  if (traits.supports_color_capability(ColorCapability::BRIGHTNESS))
-    root[ESPHOME_F("brightness")] = true;
-
   if (traits.supports_color_mode(ColorMode::COLOR_TEMPERATURE) ||
       traits.supports_color_mode(ColorMode::COLD_WARM_WHITE)) {
     root[MQTT_MIN_MIREDS] = traits.get_min_mireds();

esphome/components/nextion/display.py

@@ -14,7 +14,12 @@ from esphome.const import (
 )
 from esphome.core import CORE, TimePeriod
 
-from . import FILTER_SOURCE_FILES, Nextion, nextion_ns, nextion_ref  # noqa: F401  pylint: disable=unused-import
+from . import (  # noqa: F401  pylint: disable=unused-import
+    FILTER_SOURCE_FILES,
+    Nextion,
+    nextion_ns,
+    nextion_ref,
+)
 from .base_component import (
     CONF_AUTO_WAKE_ON_TOUCH,
     CONF_COMMAND_SPACING,

esphome/components/nrf52/__init__.py

@@ -1,24 +1,13 @@
 from __future__ import annotations
 
 import asyncio
-from functools import partial
 import logging
 from pathlib import Path
 import re
 import shutil
-import stat
 import subprocess
 
 from esphome import pins
-from esphome.build_helpers import pch
-from esphome.build_helpers.pch import (
-    PCH_DEFAULT_HEADERS,
-    PCH_HEADER_NAME,
-    mark_pch_emitted,
-    pch_cmake_consumer,
-    pch_enabled,
-    pch_header_text,
-)
 import esphome.codegen as cg
 from esphome.components.zephyr import (
     add_extra_script,
@@ -816,9 +805,6 @@ def _generate_cmake_lists() -> bool:
             ")",
         ]
 
-    if consumer := pch_cmake_consumer("app", "${APP_SOURCES}"):
-        lines += consumer.splitlines()
-
     if link_flags:
         lines += [
             "",
@@ -833,66 +819,6 @@ def _generate_cmake_lists() -> bool:
     )
 
 
-def _app_build_dir(build_dir: Path) -> Path:
-    """The CMake binary dir of the app image: sysbuild nests it in a
-    domain dir named after the app source dir. Probed on disk (the
-    non-sysbuild zephyr/ output dir has no CMakeCache.txt) so it stays
-    truthful mid-build, unlike an SDK-version check."""
-    sysbuild_app = build_dir / "zephyr"
-    try:
-        cache = (sysbuild_app / "CMakeCache.txt").stat()
-    except (FileNotFoundError, NotADirectoryError):
-        return build_dir
-    # Other stat errors propagate; is_file() would silently mislocate the pch
-    return sysbuild_app if stat.S_ISREG(cache.st_mode) else build_dir
-
-
-def _prepare_pch(app_dir: Path) -> None:
-    """Build the .gch between the cmake and compile phases of west."""
-    if not pch_enabled():
-        pch.discard_pch(app_dir)
-        pch.pch_disabled_degraded()
-        return
-    # First, so OBJECT_DEPENDS is satisfied even when the pch degrades
-    app_dir.mkdir(parents=True, exist_ok=True)
-    write_file_if_changed(
-        app_dir / PCH_HEADER_NAME, pch_header_text(PCH_DEFAULT_HEADERS)
-    )
-    # New layout first (Zephyr >= 3.4 nests under zephyr/); fixed candidates
-    # keep the .sum identity deterministic and skip walking generated/
-    generated = app_dir / "zephyr" / "include" / "generated"
-    autoconf = None
-    for candidate in (generated / "zephyr" / "autoconf.h", generated / "autoconf.h"):
-        if candidate.exists():
-            autoconf = candidate
-            break
-    if autoconf is None:
-        # Fail closed: autoconf.h is the .sum's Kconfig identity
-        _LOGGER.warning("No autoconf.h found; compiling without the pch")
-        pch.discard_pch(app_dir)
-        pch.pch_degraded("autoconf.h missing")
-        return
-    try:
-        autoconf_text = autoconf.read_text(encoding="utf-8")
-    except OSError as err:
-        _LOGGER.warning(
-            "Could not read %s; compiling without the pch: %s", autoconf, err
-        )
-        pch.discard_pch(app_dir)
-        pch.pch_degraded(f"autoconf unreadable: {err}")
-        return
-    pch.prepare_pch(
-        app_dir,
-        PCH_DEFAULT_HEADERS,
-        (
-            str(CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]),
-            zephyr_data()[KEY_BOARD],
-            autoconf_text,
-            *get_project_compile_flags(),
-        ),
-    )
-
-
 def _copy_if_exists(src: Path, dst: Path) -> None:
     if src.is_file():
         shutil.copy2(src, dst)
@@ -945,58 +871,6 @@ def run_compile(args, config: ConfigType) -> bool:
         str(source_dir),
     ]
 
-    if pch_enabled():
-        # Consumers carry the -include; gate the ccache relaxation on it
-        # (Zephyr auto-enables ccache as the compiler launcher when found)
-        mark_pch_emitted()
-        env.update(pch.ccache_pch_env())
-
-        # Configure first so the .gch compiles from settled compile DB
-        # flags. Only when the app DB is missing: input changes wipe the
-        # build dir, so an existing DB is settled and --cmake-only would
-        # reconfigure for nothing.
-        prepare = True
-        app_dir = _app_build_dir(build_dir)
-        if not (app_dir / "compile_commands.json").is_file():
-            if not run_command_ok(
-                west_cmd + ["--cmake-only", "--", "-DCMAKE_EXPORT_COMPILE_COMMANDS=ON"],
-                env=env,
-                stream_output=True,
-                cwd=str(paths["framework_path"]),
-            ):
-                raise EsphomeError("nRF52 native build configure failed")
-            # The configure phase creates the sysbuild domain dir: re-resolve
-            app_dir = _app_build_dir(build_dir)
-            # kernel.h needs the build-time syscall headers; under sysbuild
-            # the target exists only in the app domain's ninja
-            if not run_command_ok(
-                [
-                    "cmake",
-                    "--build",
-                    str(app_dir),
-                    "--target",
-                    "zephyr_generated_headers",
-                ],
-                env=env,
-                stream_output=True,
-                cwd=str(paths["framework_path"]),
-            ):
-                # A pch-only prerequisite: degrade, let the real build report.
-                # Also skip the .gch compile: it would fail on the missing
-                # headers and latch .gch.failed until an identity change
-                _LOGGER.warning(
-                    "Zephyr header generation failed; compiling without the pch"
-                )
-                pch.discard_pch(app_dir)
-                pch.pch_degraded("zephyr_generated_headers failed")
-                prepare = False
-    else:
-        prepare = True
-        app_dir = _app_build_dir(build_dir)
-
-    if prepare:
-        pch.guarded_prepare(app_dir, partial(_prepare_pch, app_dir))
-
     if not run_command_ok(
         west_cmd,
         env=env,

esphome/components/rf_bridge/rf_bridge.cpp

@@ -18,16 +18,6 @@ void RFBridgeComponent::ack_() {
 }
 
 bool RFBridgeComponent::parse_bridge_byte_(uint8_t byte) {
-  if (this->bucket_frame_candidate_ && byte == RF_CODE_START) {
-    // A queued next frame proves the trailing 0x55 really was the bucket
-    // frame's terminator: Portisch builds pulse entries from alternating
-    // signal edges, so the two level bits inside one pulse byte are always
-    // opposite — 0xAA (two high-level nibbles) cannot occur in pulse data.
-    // Finalize before this byte starts the new frame, so back-to-back
-    // deliveries are split even when loop() never observed a quiet gap
-    // between them.
-    this->finish_bucket_frame_();
-  }
   size_t at = this->rx_buffer_.size();
   this->rx_buffer_.push_back(byte);
   const uint8_t *raw = &this->rx_buffer_[0];
@@ -94,21 +84,26 @@ bool RFBridgeComponent::parse_bridge_byte_(uint8_t byte) {
       break;
     }
     case RF_CODE_RFIN_BUCKET: {
-      if (at == 2) {
-        // The count byte: Portisch sends at most 7 buckets + sync, so 0 or
-        // >8 cannot be a genuine capture — reject before it can occupy the
-        // buffer for a full frame timeout.
-        return byte != 0 && byte <= B1_MAX_BUCKET_COUNT;
+      if (byte != RF_CODE_STOP) {
+        return true;
       }
-      // 0x55 is legal DATA inside a B1 frame: bucket durations are sent
-      // with only their HIGH byte masked to 7 bits, so a duration such as
-      // 0x0155 puts a raw 0x55 low byte inside the table — the first 0x55
-      // must therefore not end the capture. The header declares the table
-      // length (raw[2] pairs), so a 0x55 there is always data; one at or
-      // past the first pulse index is a terminator CANDIDATE, confirmed
-      // once the UART goes quiet (finish_bucket_frame_ in loop()).
-      this->bucket_frame_candidate_ = byte == RF_CODE_STOP && at >= 3 + static_cast<size_t>(raw[2]) * 2;
-      return true;
+
+      uint8_t buckets = raw[2] << 1;
+      std::string str;
+      char next_byte[3];  // 2 hex chars + null
+
+      for (uint32_t i = 0; i <= at; i++) {
+        buf_append_printf(next_byte, sizeof(next_byte), 0, "%02X", raw[i]);
+        str += next_byte;
+        if ((i > 3) && buckets) {
+          buckets--;
+        }
+        if ((i < 3) || (buckets % 2) || (i == at - 1)) {
+          str += " ";
+        }
+      }
+      ESP_LOGI(TAG, "Received RFBridge Bucket: %s", str.c_str());
+      break;
     }
     default:
       ESP_LOGW(TAG, "Unknown action: 0x%02X", action);
@@ -124,47 +119,6 @@ bool RFBridgeComponent::parse_bridge_byte_(uint8_t byte) {
   return false;
 }
 
-void RFBridgeComponent::finish_bucket_frame_() {
-  if (this->rx_buffer_.size() < 4) {
-    // The candidate flag requires a header + non-empty bucket table, so
-    // this cannot happen while flag and buffer stay consistent; guard the
-    // raw[2] / size-1 reads against any future divergence anyway.
-    this->rx_buffer_.clear();
-    this->bucket_frame_candidate_ = false;
-    return;
-  }
-  const uint8_t *raw = this->rx_buffer_.data();
-  const size_t at = this->rx_buffer_.size() - 1;
-
-  uint8_t buckets = raw[2] << 1;
-  std::string str;
-  char next_byte[3];  // 2 hex chars + null
-
-  for (uint32_t i = 0; i <= at; i++) {
-    buf_append_printf(next_byte, sizeof(next_byte), 0, "%02X", raw[i]);
-    str += next_byte;
-    if ((i > 3) && buckets) {
-      buckets--;
-    }
-    if ((i < 3) || (buckets % 2) || (i == at - 1)) {
-      str += " ";
-    }
-  }
-  ESP_LOGI(TAG, "Received RFBridge Bucket: %s", str.c_str());
-
-  // Deliberately NOT ACKed: Portisch's B1 command handler leaves its
-  // last_sniffing_command at the previous mode (RF_CODE_RFIN), and its
-  // host-ACK handler re-arms sniffing from that stale value — so ACKing a
-  // bucket delivery silently reverts the radio to standard sniffing and
-  // ends bucket capture. Its delivery path is fire-and-forget and never
-  // waits for a host ACK. Stock Itead firmware never sends B1 frames, so
-  // suppressing this ACK cannot change stock-firmware behavior.
-  // https://github.com/esphome/esphome/issues/17682
-
-  this->rx_buffer_.clear();
-  this->bucket_frame_candidate_ = false;
-}
-
 void RFBridgeComponent::write_byte_str_(const std::string &codes) {
   uint8_t code;
   int size = codes.length();
@@ -176,31 +130,12 @@ void RFBridgeComponent::write_byte_str_(const std::string &codes) {
 
 void RFBridgeComponent::loop() {
   const uint32_t now = App.get_loop_component_start_time();
-  size_t avail = this->available();
-  if (avail == 0 && this->bucket_frame_candidate_ && now - this->last_bridge_byte_ > BUCKET_CANDIDATE_QUIET_MS) {
-    // The trailing 0x55 was followed by UART quiet, so it really was the
-    // frame terminator and not an interior data byte.
-    this->finish_bucket_frame_();
-    this->last_bridge_byte_ = now;
-  }
-  const bool receiving_bucket = this->rx_buffer_.size() >= 2 && this->rx_buffer_[1] == RF_CODE_RFIN_BUCKET;
-  if (receiving_bucket) {
-    // Never declare an in-progress bucket frame dead while its continuation
-    // bytes are already queued: a stalled loop() otherwise discards a live
-    // frame that the UART buffer proves is still arriving.
-    if (avail == 0 && now - this->last_bridge_byte_ > BUCKET_FRAME_TIMEOUT_MS) {
-      ESP_LOGD(TAG, "Discarding incomplete RFBridge Bucket frame (%u bytes)",
-               static_cast<unsigned>(this->rx_buffer_.size()));
-      this->rx_buffer_.clear();
-      this->bucket_frame_candidate_ = false;
-      this->last_bridge_byte_ = now;
-    }
-  } else if (now - this->last_bridge_byte_ > 50) {
+  if (now - this->last_bridge_byte_ > 50) {
     this->rx_buffer_.clear();
-    this->bucket_frame_candidate_ = false;
     this->last_bridge_byte_ = now;
   }
 
+  size_t avail = this->available();
   while (avail > 0) {
     uint8_t buf[64];
     size_t to_read = std::min(avail, sizeof(buf));
@@ -211,14 +146,12 @@ void RFBridgeComponent::loop() {
     for (size_t i = 0; i < to_read; i++) {
       if (this->rx_buffer_.size() > MAX_RX_BUFFER_SIZE) {
         this->rx_buffer_.clear();
-        this->bucket_frame_candidate_ = false;
       }
       if (this->parse_bridge_byte_(buf[i])) {
         ESP_LOGVV(TAG, "Parsed: 0x%02X", buf[i]);
         this->last_bridge_byte_ = now;
       } else {
         this->rx_buffer_.clear();
-        this->bucket_frame_candidate_ = false;
       }
     }
   }

esphome/components/rf_bridge/rf_bridge.h

@@ -30,17 +30,6 @@ static const uint8_t RF_CODE_BEEP = 0xC0;
 static const uint8_t RF_CODE_STOP = 0x55;
 static const uint8_t RF_DEBOUNCE = 200;
 static const size_t MAX_RX_BUFFER_SIZE = 512;
-// ~10 byte times at 19200 baud: long enough to prove the UART went quiet
-// after a possible bucket-frame terminator, short enough to finish well
-// before the next radio capture can be delivered.
-static const uint32_t BUCKET_CANDIDATE_QUIET_MS = 5;
-// Portisch drains a B1 frame's header, bucket table, and pulse data as
-// separate UART writes, so an in-progress bucket frame tolerates a longer
-// inter-region gap than the generic 50 ms inter-byte timeout.
-static const uint32_t BUCKET_FRAME_TIMEOUT_MS = 250;
-// Portisch's uart_put_RF_buckets sends at most 7 buckets plus the sync
-// bucket, so a B1 count byte above 8 (or 0) is malformed for any protocol.
-static const uint8_t B1_MAX_BUCKET_COUNT = 8;
 
 struct RFBridgeData {
   uint16_t sync;
@@ -78,12 +67,10 @@ class RFBridgeComponent final : public uart::UARTDevice, public Component {
   void ack_();
   void decode_();
   bool parse_bridge_byte_(uint8_t byte);
-  void finish_bucket_frame_();
   void write_byte_str_(const std::string &codes);
 
   std::vector<uint8_t> rx_buffer_;
   uint32_t last_bridge_byte_{0};
-  bool bucket_frame_candidate_{false};
 
   CallbackManager<void(RFBridgeData)> data_callback_;
   CallbackManager<void(RFBridgeAdvancedData)> advanced_data_callback_;

esphome/components/rp2/__init__.py

@@ -6,7 +6,6 @@ from string import ascii_letters, digits
 import subprocess
 from typing import Any
 
-from esphome.build_helpers.pch import pch_extra_scripts
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.const import (
@@ -34,7 +33,7 @@ from esphome.core import (
 )
 from esphome.core.config import BOARD_MAX_LENGTH
 from esphome.helpers import copy_file_if_changed, read_file, write_file_if_changed
-from esphome.platformio.toolchain import copy_ccache_script, copy_pch_script
+from esphome.platformio.toolchain import copy_ccache_script
 from esphome.storage_json import StorageJSON
 from esphome.types import ConfigType
 
@@ -341,10 +340,7 @@ async def to_code(config: ConfigType) -> None:
     cg.add_define("ESPHOME_VARIANT", VARIANT_FRIENDLY[variant])
     cg.add_define(ThreadModel.SINGLE)
 
-    cg.add_platformio_option(
-        "extra_scripts",
-        ["pre:ccache.py", *pch_extra_scripts(), "post:post_build.py"],
-    )
+    cg.add_platformio_option("extra_scripts", ["pre:ccache.py", "post:post_build.py"])
 
     conf = config[CONF_FRAMEWORK]
     cg.add_platformio_option("framework", "arduino")
@@ -648,7 +644,6 @@ def copy_files() -> None:
         CORE.relative_build_path("inject_lwip_include.py"),
     )
     copy_ccache_script()
-    copy_pch_script()
     _generate_lwipopts_h()
     if generate_pio_files():
         path = CORE.relative_src_path("esphome.h")

esphome/components/tuya/tuya.cpp

@@ -1,13 +1,10 @@
 #include "tuya.h"
+#include "esphome/components/network/util.h"
 #include "esphome/core/gpio.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 #include "esphome/core/util.h"
 
-#ifdef USE_NETWORK
-#include "esphome/components/network/util.h"
-#endif
-
 #ifdef USE_WIFI
 #include "esphome/components/wifi/wifi_component.h"
 #endif
@@ -25,14 +22,6 @@ static const int MAX_RETRIES = 5;
 // Max bytes to log for datapoint values (larger values are truncated)
 static constexpr size_t MAX_DATAPOINT_LOG_BYTES = 16;
 
-static bool network_is_connected() {
-#ifdef USE_NETWORK
-  return network::is_connected();
-#else
-  return false;
-#endif
-}
-
 void Tuya::setup() {
   this->set_interval("heartbeat", 15000, [this] { this->send_empty_command_(TuyaCommandType::HEARTBEAT); });
   if (this->status_pin_ != nullptr) {
@@ -565,14 +554,14 @@ void Tuya::send_empty_command_(TuyaCommandType command) {
 }
 
 void Tuya::set_status_pin_() {
-  bool is_network_ready = network_is_connected() && remote_is_connected();
+  bool is_network_ready = network::is_connected() && remote_is_connected();
   this->status_pin_->digital_write(is_network_ready);
 }
 
 uint8_t Tuya::get_wifi_status_code_() {
   uint8_t status = 0x02;
 
-  if (network_is_connected()) {
+  if (network::is_connected()) {
     status = 0x03;
 
     // Protocol version 3 also supports specifying when connected to "the cloud"

esphome/components/udp/__init__.py

@@ -1,4 +1,5 @@
-from typing import Any
+from collections.abc import Callable
+from typing import Any, NoReturn
 
 from esphome import automation
 from esphome.automation import Trigger
@@ -47,10 +48,17 @@ UDP_SCHEMA = cv.Schema(
 )
 
 
+def is_relocated(option: str) -> Callable[[Any], NoReturn]:
+    def validator(value: Any) -> NoReturn:
+        raise cv.Invalid(
+            f"The '{option}' option should now be configured in the 'packet_transport' component"
+        )
+
+    return validator
+
+
 RELOCATED = {
-    cv.Optional(x): cv.invalid(
-        f"The '{x}' option should now be configured in the 'packet_transport' component"
-    )
+    cv.Optional(x): is_relocated(x)
     for x in (
         CONF_PROVIDERS,
         CONF_ENCRYPTION,

esphome/core/__init__.py

@@ -1143,14 +1143,13 @@ class EsphomeCore:
     def add_platformio_option(
         self, key: str, value: str | list[str], *, replace: bool = False
     ) -> None:
-        """Set a platformio.ini option; values append to an existing list
-        (a string as one element) unless ``replace`` is True, which
-        overwrites any existing value."""
+        """Set a platformio.ini option; list values append to an existing list
+        unless ``replace`` is True, which overwrites any existing value."""
         new_val = value
         old_val = self.platformio_options.get(key)
         if not replace and isinstance(old_val, list):
-            # A user platformio_options string must merge, not assert
-            new_val = old_val + ([value] if isinstance(value, str) else value)
+            assert isinstance(value, list)
+            new_val = old_val + value
         self.platformio_options[key] = new_val
 
     def _get_variable_generator(self, id):

esphome/core/config.py

@@ -555,14 +555,7 @@ NATIVE_ARDUINO_PIO_OPTIONS = frozenset({"board_build.f_cpu", "board_build.ldscri
 # that is stored rather than translated away. Consumed by the esp8266 native
 # backend (later in this chain) for its ignored-option warning; defined here
 # so it stays adjacent to the routing.
-# build_src_flags and board_build.flash_mode: set unconditionally by
-# esp8266/__init__ and read by the native generator; not user-routable, so
-# not in the set above
-NATIVE_ARDUINO_CONSUMED_PIO_OPTIONS = NATIVE_ARDUINO_PIO_OPTIONS | {
-    "lib_ignore",
-    "build_src_flags",
-    "board_build.flash_mode",
-}
+NATIVE_ARDUINO_CONSUMED_PIO_OPTIONS = NATIVE_ARDUINO_PIO_OPTIONS | {"lib_ignore"}
 
 
 @coroutine_with_priority(CoroPriority.FINAL)

esphome/core/pch_prefix.h

@@ -1,8 +0,0 @@
-#pragma once
-// Curated precompiled-header prefix for backends that force-include it via
-// build_src_flags (the pch script folds it into the .gch). Guarded because
-// build_src_flags also reaches C and assembly src edges.
-#ifdef __cplusplus
-#include "esphome/core/application.h"
-#include "esphome/core/automation.h"
-#endif

esphome/espidf/_tool_resolution.py

@@ -1,68 +0,0 @@
-"""Shared tool resolution for the sibling idf_tools-backed scripts.
-
-Importable because ``python <script>`` puts this directory first on
-sys.path; ``idf_tools`` itself comes from PYTHONPATH.
-"""
-
-# pylint: disable=import-error  # idf_tools is on PYTHONPATH at runtime only
-
-from collections.abc import Callable, Iterator
-import os
-from pathlib import Path
-
-from idf_tools import (
-    CURRENT_PLATFORM,
-    TOOLS_FILE,
-    IDFEnv,
-    ToolBinaryError,
-    add_and_check_targets,
-    expand_tools_arg,
-    g,
-    load_tools_info,
-)
-
-
-def init_idf_tools(idf_framework_root: str) -> None:
-    """Point idf_tools' globals at the framework and IDF_TOOLS_PATH."""
-    g.idf_path = idf_framework_root
-    g.idf_tools_path = os.environ.get("IDF_TOOLS_PATH")
-    g.tools_json = str(Path(g.idf_path) / TOOLS_FILE)
-
-
-def archive_name(download: object) -> str:
-    """The dist/ filename idf_tools downloads and installs this from."""
-    return download.rename_dist or Path(download.url).name
-
-
-def iter_tool_downloads(
-    targets_csv: str,
-    tool_specs: list[str],
-    on_broken: Callable[[str, ToolBinaryError], bool],
-) -> Iterator[tuple[object, str, str, object]]:
-    """Yield (tool, name, version, download) per uninstalled tool, mirroring
-    ``idf_tools.py install``'s expansion; ``on_broken(name, err)`` returns
-    True to treat a tool with a failing installed binary as not installed."""
-    targets = add_and_check_targets(IDFEnv.get_idf_env(), targets_csv)
-    tools_info = load_tools_info()
-    for name in expand_tools_arg(tool_specs, tools_info, targets):
-        if "@" in name:
-            name, version = name.split("@", 1)
-        else:
-            version = None
-        tool = tools_info.get(name)
-        if tool is None or not tool.compatible_with_platform():
-            continue
-        version = version or tool.get_recommended_version()
-        if version is None:
-            continue
-        try:
-            tool.find_installed_versions()
-        except ToolBinaryError as e:
-            if not on_broken(name, e):
-                continue
-        if version in tool.versions_installed or version not in tool.versions:
-            continue
-        download = tool.versions[version].get_download_for_platform(CURRENT_PLATFORM)
-        if download is None:
-            continue
-        yield tool, name, version, download

esphome/espidf/framework.py

@@ -16,11 +16,9 @@ from esphome.build_helpers.ccache import (
     parse_enable_env,
     resolve_ccache_path,
 )
-from esphome.build_helpers.pch import ccache_pch_env
 from esphome.build_helpers.tools_cache import IDF_TOOLS_CACHE, tools_cache_path
 from esphome.core import Version
 from esphome.framework_helpers import (
-    BATCH_EXTRACT_WORKERS,
     PathType,
     create_venv,
     download_and_extract,
@@ -28,7 +26,6 @@ from esphome.framework_helpers import (
     failure_reason,
     get_python_env_executable_path,
     get_system_python_path,
-    is_expected_fetch_error,
     resume_fetch_job,
     rmdir,
     run_batch_downloads,
@@ -36,9 +33,9 @@ from esphome.framework_helpers import (
     run_command_ok,
     str_to_lst_of_str,
     tool_version_runs,
-    warn_batch_failures,
+    warn_prefetch_failures,
 )
-from esphome.helpers import get_usable_cpu_count, write_file_if_changed
+from esphome.helpers import write_file_if_changed
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -294,13 +291,11 @@ def _run_idf_tools_script(
     msg: str,
     args: list[str] | None = None,
     env: dict[str, str] | None = None,
-    stream_output: bool = False,
 ) -> tuple[bool, str | None, str | None]:
     """Run one of the sibling idf_tools-backed helper scripts.
 
-    PYTHONPATH carries this directory (sibling imports like
-    ``_tool_resolution``), the esphome package root (``esphome.helpers``),
-    and the framework's ``tools`` dir (its own ``idf_tools`` module).
+    The script is executed with the framework's ``tools`` directory on
+    PYTHONPATH so it imports the framework's own ``idf_tools`` module.
     """
     cmd = [
         get_system_python_path(),
@@ -308,20 +303,11 @@ def _run_idf_tools_script(
         str(idf_framework_root),
         *(args or []),
     ]
-    # Explicit paths: the scripts dir (sibling imports must survive
-    # PYTHONSAFEPATH), the esphome package root, and the framework's idf_tools
-    pythonpath = os.pathsep.join(
-        (
-            str(_SCRIPTS_DIR),
-            str(_SCRIPTS_DIR.parents[1]),
-            str(Path(idf_framework_root) / "tools"),
-        )
-    )
     return run_command(
         cmd,
         msg=msg,
-        env=(env or os.environ) | {"PYTHONPATH": pythonpath},
-        stream_output=stream_output,
+        env=(env or os.environ)
+        | {"PYTHONPATH": str(Path(idf_framework_root) / "tools")},
     )
 
 
@@ -739,9 +725,9 @@ def _prefetch_idf_tool_archives(
         dist_path = get_idf_tools_path() / "dist"
         entries = []
         seen_dests: set[str] = set()
-        # Pre-existing archives are not skipped: download_with_resume keeps
-        # them only on a sha256 match, so the pre-extraction can trust dist/
         for entry in json.loads(stdout):
+            if (dist_path / entry["dest"]).is_file():
+                continue
             # Never download unverified: an entry without sha256/size is
             # left to the installer, which fails loudly on a bad archive.
             # Checked before the dedupe so it cannot shadow a verifiable
@@ -761,11 +747,9 @@ def _prefetch_idf_tool_archives(
             entries.append(entry)
         if not entries:
             return
-        cached = sum((dist_path / entry["dest"]).is_file() for entry in entries)
         _LOGGER.info(
-            "Downloading %d ESP-IDF tool archive(s)%s: %s",
+            "Downloading %d ESP-IDF tool archive(s): %s",
             len(entries),
-            f" ({cached} cached, verifying)" if cached else "",
             ", ".join(entry["name"] for entry in entries),
         )
 
@@ -789,7 +773,7 @@ def _prefetch_idf_tool_archives(
                 for entry in entries
             ],
         )
-        warn_batch_failures(failures)
+        warn_prefetch_failures(failures)
         if len(failures) == len(entries):
             # A systematic fault, not one flaky mirror: the resume
             # workaround (#17703) is off for this whole install
@@ -804,42 +788,6 @@ def _prefetch_idf_tool_archives(
         _LOGGER.debug("Prefetch failure detail", exc_info=True)
 
 
-def _preinstall_idf_tool_archives(
-    framework_path: Path,
-    targets_str: str,
-    tools: list[str],
-    env: dict[str, str] | None,
-) -> None:
-    """Run install_tool_archives.py to extract the prefetched tool archives
-    in parallel. Strictly best-effort: the sequential installer remains the
-    authority (see that script's docstring)."""
-    try:
-        success, _stdout, _stderr = _run_idf_tools_script(
-            framework_path,
-            "install_tool_archives.py",
-            "ESP-IDF tool archive extraction",
-            args=[
-                targets_str,
-                str(min(get_usable_cpu_count(), BATCH_EXTRACT_WORKERS)),
-                *tools,
-            ],
-            env=env,
-            stream_output=True,
-        )
-        if not success:
-            # Detail already streamed to the terminal by the script; a
-            # surviving torn dir prints its own guidance there
-            _LOGGER.warning("ESP-IDF tool pre-extraction failed; see above")
-    except Exception as e:  # noqa: BLE001  # pylint: disable=broad-exception-caught
-        # A programming error keeps its traceback at WARNING
-        _LOGGER.warning(
-            "ESP-IDF tool pre-extraction failed: %s",
-            failure_reason(e),
-            exc_info=None if is_expected_fetch_error(e) else e,
-        )
-        _LOGGER.debug("Pre-extraction failure detail", exc_info=True)
-
-
 def _check_esphome_idf_framework_install(
     version: str,
     targets: list[str],
@@ -991,7 +939,6 @@ def _check_esphome_idf_framework_install(
         _LOGGER.info("Installing ESP-IDF %s framework ...", version)
         targets_str = ",".join(targets)
         _prefetch_idf_tool_archives(framework_path, targets_str, tools, env)
-        _preinstall_idf_tool_archives(framework_path, targets_str, tools, env)
         cmd = [
             get_system_python_path(),
             str(idf_tools_path),
@@ -1258,33 +1205,15 @@ def _ccache_env() -> dict[str, str]:
 
     Only values the user has not already set in the environment are returned, so
     a custom ``CCACHE_DIR`` / ``CCACHE_MAXSIZE`` / etc. is respected.
-    The pch settings add ``time_macros`` sloppiness process-wide; the visible
-    effect is a cached TU can keep an older ``esp_app_desc`` build timestamp.
-    """
-    if not _ccache_enabled():
-        # The raw knob value (e.g. "disable") is still inherited by idf.py
-        # via os.environ, where a non-false-constant string reads as
-        # truthy; export the canonical off spelling instead
-        return {"IDF_CCACHE_ENABLE": "0"}
-
-    env = ccache_defaults_env(get_idf_tools_path() / "ccache")
-    env.update(ccache_pch_env())
-    # Exactly one canonical spelling ever reaches idf.py, whatever the
-    # accepted input spelling was ("enable", "yes", ...)
-    env["IDF_CCACHE_ENABLE"] = "1"
-    return env
-
-
-def _ccache_enabled() -> bool:
-    """Whether ESP-IDF compiles run under ccache.
-
-    IDF_CCACHE_ENABLE (the backend-native knob) wins over the shared
-    ESPHOME_CCACHE_ENABLE; when unset, enabled iff a runnable binary is
-    on PATH.
     """
+    # IDF_CCACHE_ENABLE (the backend-native knob) wins over the shared
+    # ESPHOME_CCACHE_ENABLE.
     idf_knob = parse_enable_env("IDF_CCACHE_ENABLE")
     if idf_knob is False:
-        return False
+        # The raw value (e.g. "disable") is still inherited by idf.py via
+        # os.environ, where a non-false-constant string reads as truthy;
+        # export the canonical off spelling instead
+        return {"IDF_CCACHE_ENABLE": "0"}
     if idf_knob is True:
         # Forced on ignores the runnability verdict, but the outcome is
         # worth saying out loud. Probed directly (not via the resolver,
@@ -1304,8 +1233,17 @@ def _ccache_enabled() -> bool:
                 "IDF_CCACHE_ENABLE=1 forces on the ccache at %s even though "
                 "it failed to run; idf.py will use it anyway",
             )
-        return True
-    return resolve_ccache_path() is not None
+    elif resolve_ccache_path() is None:
+        # ESP-IDF silently skips ccache without the binary; export the
+        # canonical off spelling so an unparsable inherited value (or a
+        # probe-rejected ccache idf.py would still find) cannot enable it
+        return {"IDF_CCACHE_ENABLE": "0"}
+
+    env = ccache_defaults_env(get_idf_tools_path() / "ccache")
+    # Exactly one canonical spelling ever reaches idf.py, whatever the
+    # accepted input spelling was ("enable", "yes", ...)
+    env["IDF_CCACHE_ENABLE"] = "1"
+    return env
 
 
 def get_framework_env(

esphome/espidf/get_tool_downloads.py

@@ -1,9 +1,8 @@
 """Print JSON download info for the ESP-IDF tools an install would fetch.
 
 Run via ``python <this file> <idf_framework_root> <targets-csv> <tool-spec>...``.
-PYTHONPATH must include this directory (for ``_tool_resolution``) and
-``<idf_framework_root>/tools`` (for ``idf_tools``), and IDF_TOOLS_PATH must
-be set. Prints a JSON list of
+PYTHONPATH must include ``<idf_framework_root>/tools`` so ``idf_tools`` is
+importable, and IDF_TOOLS_PATH must be set. Prints a JSON list of
 ``{name, url, size, sha256, dest}`` for every tool version that is not yet
 installed, where ``dest`` is the archive filename ``idf_tools.py install``
 expects to find in ``<IDF_TOOLS_PATH>/dist``. Tools with no download for the
@@ -19,36 +18,67 @@ or written — this script only reports what the install would download.
 
 from contextlib import redirect_stdout
 import json
+import os
+from pathlib import Path
 import sys
 
-from _tool_resolution import archive_name, init_idf_tools, iter_tool_downloads
-from idf_tools import ToolBinaryError, get_idf_download_url_apply_mirrors
+from idf_tools import (
+    CURRENT_PLATFORM,
+    TOOLS_FILE,
+    IDFEnv,
+    ToolBinaryError,
+    add_and_check_targets,
+    expand_tools_arg,
+    g,
+    get_idf_download_url_apply_mirrors,
+    load_tools_info,
+)
 
 
 def collect_downloads() -> list[dict]:
-    init_idf_tools(sys.argv[1])
+    g.idf_path = sys.argv[1]
+    g.idf_tools_path = os.environ.get("IDF_TOOLS_PATH")
+    g.tools_json = str(Path(g.idf_path) / TOOLS_FILE)
 
-    def on_broken(name: str, e: ToolBinaryError) -> bool:
-        # A broken installed binary is idf_tools' problem to repair on
-        # install; note it and treat the version as not installed.
-        print(f"tool {name} failed its binary check: {e}", file=sys.stderr)
-        return True
+    targets = add_and_check_targets(IDFEnv.get_idf_env(), sys.argv[2])
+    tools_info = load_tools_info()
+    downloads: list[dict] = []
 
-    return [
-        {
-            "name": f"{name}@{version}",
-            # Apply the same IDF_MIRROR_PREFIX_MAP / IDF_GITHUB_ASSETS
-            # rewriting the installer's own downloader applies, so users
-            # behind a mirror prefetch from the mirror too.
-            "url": get_idf_download_url_apply_mirrors(None, download.url),
-            "size": download.size,
-            "sha256": download.sha256,
-            "dest": archive_name(download),
-        }
-        for _tool, name, version, download in iter_tool_downloads(
-            sys.argv[2], sys.argv[3:], on_broken
+    for name in expand_tools_arg(sys.argv[3:], tools_info, targets):
+        if "@" in name:
+            name, version = name.split("@", 1)
+        else:
+            version = None
+        tool = tools_info.get(name)
+        if tool is None or not tool.compatible_with_platform():
+            continue
+        version = version or tool.get_recommended_version()
+        if version is None:
+            continue
+        try:
+            tool.find_installed_versions()
+        except ToolBinaryError as e:
+            # A broken installed binary is idf_tools' problem to repair on
+            # install; note it and treat the version as not installed.
+            print(f"tool {name} failed its binary check: {e}", file=sys.stderr)
+        if version in tool.versions_installed or version not in tool.versions:
+            continue
+        download = tool.versions[version].get_download_for_platform(CURRENT_PLATFORM)
+        if download is None:
+            continue
+        downloads.append(
+            {
+                "name": f"{name}@{version}",
+                # Apply the same IDF_MIRROR_PREFIX_MAP / IDF_GITHUB_ASSETS
+                # rewriting the installer's own downloader applies, so users
+                # behind a mirror prefetch from the mirror too.
+                "url": get_idf_download_url_apply_mirrors(None, download.url),
+                "size": download.size,
+                "sha256": download.sha256,
+                "dest": download.rename_dist or Path(download.url).name,
+            }
         )
-    ]
+    return downloads
 
 
 # idf_tools prints informational lines (e.g. mirror URL rewrites) to stdout;

esphome/espidf/install_tool_archives.py

@@ -1,129 +0,0 @@
-"""Extract prefetched ESP-IDF tool archives in parallel.
-
-Run via ``python <this file> <idf_framework_root> <targets-csv> <workers>
-<tool-spec>...`` with idf_tools and the esphome package root on PYTHONPATH
-and IDF_TOOLS_PATH set.
-Drives idf_tools' own ``IDFTool.install()`` so extraction semantics match
-the sequential installer, which still runs afterwards as the authority and
-redoes anything this best-effort pass failed on. Archives are trusted from
-the prefetch's sha256 verification, not re-hashed here.
-"""
-
-# pylint: disable=import-error  # idf_tools is on PYTHONPATH at runtime only
-
-from concurrent.futures import ThreadPoolExecutor
-from pathlib import Path
-import sys
-
-from _tool_resolution import archive_name, init_idf_tools, iter_tool_downloads
-from idf_tools import ToolBinaryError, g
-
-from esphome.helpers import rmtree
-
-
-def collect_pending(
-    targets_csv: str, tool_specs: list[str]
-) -> tuple[dict[tuple[str, str], object], int]:
-    """The {(name, version): tool} jobs whose verified archive is on disk,
-    and how many distinct uninstalled tools were resolved overall."""
-    dist_path = Path(g.idf_tools_path) / "dist"
-
-    def on_broken(name: str, e: ToolBinaryError) -> bool:
-        # Repairing a broken installed binary is the installer's job
-        print(f"leaving broken {name} to the installer: {e}", file=sys.stderr)
-        return False
-
-    pending: dict[tuple[str, str], object] = {}
-    resolved: set[tuple[str, str]] = set()
-    for tool, name, version, download in iter_tool_downloads(
-        targets_csv, tool_specs, on_broken
-    ):
-        resolved.add((name, version))
-        # Mirror the prefetch: an entry it could not verify is never trusted
-        if not (download.sha256 and download.size):
-            continue
-        # Trusted as-is: the prefetch verifies archives at their final name,
-        # and the installer redoes anything this pass fails on
-        if (name, version) in pending or not (
-            dist_path / archive_name(download)
-        ).is_file():
-            continue
-        pending[(name, version)] = tool
-    return pending, len(resolved)
-
-
-def install_one(tool: object, name: str, version: str) -> bool | None:
-    """True on success, False on a cleaned-up failure, None when the torn
-    dest dir survived and could fool the installer's binary probe."""
-    try:
-        tool.install(version)
-    # check_binary_valid exits via SystemExit; the installer redoes failures
-    except (Exception, SystemExit) as e:  # noqa: BLE001  # pylint: disable=broad-exception-caught
-        # Name the type: idf_tools' fatal() raises SystemExit(1), which
-        # would render as a bare "1"
-        print(
-            f"pre-extracting {name}@{version} failed, leaving it to the "
-            f"installer: {type(e).__name__}: {e}",
-            file=sys.stderr,
-        )
-        # A torn dest dir must not look installed to the installer
-        dest = tool.get_path_for_version(version)
-        try:
-            rmtree(dest)
-        except FileNotFoundError:  # pragma: no cover  # failed before mkdir
-            pass
-        except OSError as cleanup_err:
-            print(
-                f"could not remove {dest}: {cleanup_err}; the installer may "
-                "trust the partial tool dir, delete it manually if the build "
-                "fails",
-                file=sys.stderr,
-            )
-            return None
-        return False
-    # Per-tool completion keeps the multi-minute unpack phase visibly alive
-    print(f"extracted {name}@{version}", flush=True)
-    return True
-
-
-def main() -> None:
-    _script, idf_framework_root, targets_csv, workers_str, *tool_specs = sys.argv
-    init_idf_tools(idf_framework_root)
-    pending, resolved = collect_pending(targets_csv, tool_specs)
-    if len(pending) < 2:
-        # Nothing to parallelize; the count makes a naming/resolution drift
-        # that would silently disable this pass observable
-        print(
-            f"{len(pending)} of {resolved} uninstalled tool(s) have a "
-            "prefetched archive; leaving them to the installer",
-            flush=True,
-        )
-        return
-    workers = min(int(workers_str), len(pending))
-    print(
-        f"Extracting {len(pending)} ESP-IDF tool archive(s) with "
-        f"{workers} worker(s): "
-        + ", ".join(f"{name}@{version}" for name, version in pending),
-        flush=True,
-    )
-    with ThreadPoolExecutor(max_workers=workers) as ex:
-        futures = [
-            ex.submit(install_one, tool, name, version)
-            for (name, version), tool in pending.items()
-        ]
-        try:
-            results = [future.result() for future in futures]
-        except BaseException:  # pragma: no cover
-            # Ctrl-C: drop queued extractions; in-flight ones finish whole
-            ex.shutdown(wait=True, cancel_futures=True)
-            raise
-    # A survivor could fool the installer; every job failing is systematic.
-    # Either way a nonzero exit makes the caller warn
-    failed = sum(result is not True for result in results)
-    if failed:
-        print(f"{failed} of {len(results)} pre-extractions failed", file=sys.stderr)
-        if None in results or failed == len(results):
-            sys.exit(1)
-
-
-main()

esphome/espidf/toolchain.py

@@ -528,12 +528,6 @@ def run_compile(config, verbose: bool) -> int:
             return result.returncode
         _patch_memory_segments()
 
-    # After every reconfigure so compile_commands and sdkconfig are settled
-    from esphome.build_gen.espidf import prepare_pch
-    from esphome.build_helpers.pch import guarded_prepare
-
-    guarded_prepare(CORE.relative_build_path("build"), prepare_pch)
-
     # Build
     args = []
 

esphome/framework_helpers.py

@@ -288,25 +288,10 @@ def _detect_archive_root(names: Iterable[str]) -> str | None:
     return root if has_descendant else None
 
 
-def _resolve_progress(
-    progress: Callable[[float], None] | None,
-    progress_header: str | None,
-    has_work: bool,
-) -> Callable[[float], None] | None:
-    """Fraction reporter for an extractor: the caller's callback wins over a
-    private ``progress_header`` bar."""
-    if progress is not None:
-        return progress
-    if progress_header and has_work:
-        return ProgressBar(progress_header).update
-    return None
-
-
 def _tar_extract_all(
     data: io.BufferedIOBase,
     extract_dir: PathType = ".",
     progress_header: str | None = None,
-    progress: Callable[[float], None] | None = None,
 ):
     """
     Extract a TAR archive to the specified directory.
@@ -321,7 +306,6 @@ def _tar_extract_all(
         data: File-like object containing the TAR archive
         extract_dir: Directory to extract contents to
         progress_header: If set, show a progress bar with this header
-        progress: fraction callback (0..1, ends at 1.0); overrides progress_header
     """
     import tarfile
 
@@ -380,20 +364,21 @@ def _tar_extract_all(
             safe_members.append(member)
 
         total = len(safe_members)
-        report = _resolve_progress(progress, progress_header, total > 0)
+        progress = (
+            ProgressBar(progress_header) if progress_header and total > 0 else None
+        )
         for i, member in enumerate(safe_members, 1):
             tar_ref.extract(member, abs_dest)
-            if report is not None:
-                report(i / total)
-        if report is not None:
-            report(1)
+            if progress is not None:
+                progress.update(i / total)
+        if progress is not None:
+            progress.update(1)
 
 
 def _zip_extract_all(
     data: io.BufferedIOBase,
     extract_dir: PathType = ".",
     progress_header: str | None = None,
-    progress: Callable[[float], None] | None = None,
 ):
     """
     Extract a ZIP archive to the specified directory.
@@ -402,7 +387,6 @@ def _zip_extract_all(
         data: File-like object containing the ZIP archive
         extract_dir: Directory to extract contents to
         progress_header: If set, show a progress bar with this header
-        progress: fraction callback (0..1, ends at 1.0); overrides progress_header
     """
     import zipfile
 
@@ -419,7 +403,9 @@ def _zip_extract_all(
         strip_prefix = f"{strip_root}/" if strip_root is not None else None
 
         total = len(all_members)
-        report = _resolve_progress(progress, progress_header, total > 0)
+        progress = (
+            ProgressBar(progress_header) if progress_header and total > 0 else None
+        )
 
         for i, member in enumerate(all_members, 1):
             # 1. Normalize name
@@ -452,10 +438,10 @@ def _zip_extract_all(
             # 6. Extract
             zip_ref.extract(member, extract_dir)
 
-            if report is not None:
-                report(i / total)
-        if report is not None:
-            report(1)
+            if progress is not None:
+                progress.update(i / total)
+        if progress is not None:
+            progress.update(1)
 
 
 def _rename_with_retry(
@@ -486,7 +472,6 @@ def _7z_extract_all(
     data: io.BufferedIOBase,
     extract_dir: PathType = ".",
     progress_header: str | None = None,
-    progress: Callable[[float], None] | None = None,
 ):
     """
     Extract a 7z archive to the specified directory.
@@ -501,7 +486,6 @@ def _7z_extract_all(
         data: File-like object containing the 7z archive (must be seekable)
         extract_dir: Directory to extract contents to
         progress_header: If set, show a progress bar with this header
-        progress: called with 1.0 on completion; overrides progress_header
     """
     import py7zr
 
@@ -540,15 +524,19 @@ def _7z_extract_all(
                     continue
                 safe_targets.append(raw)
 
-            report = _resolve_progress(progress, progress_header, bool(safe_targets))
+            progress = (
+                ProgressBar(progress_header)
+                if progress_header and safe_targets
+                else None
+            )
 
             if len(safe_targets) == len(all_names):
                 z.extractall(path=staging)
             else:
                 z.extract(path=staging, targets=safe_targets)
 
-            if report is not None:
-                report(1)
+            if progress is not None:
+                progress.update(1)
 
         src_root = staging / strip_root if strip_root else staging
         for item in src_root.iterdir():
@@ -579,7 +567,6 @@ def archive_extract_all(
     archive: PathType | io.RawIOBase | IO[bytes],
     extract_dir: PathType = ".",
     progress_header: str | None = None,
-    progress: Callable[[float], None] | None = None,
 ):
     """
     Extract an archive file to the specified directory.
@@ -588,7 +575,6 @@ def archive_extract_all(
         archive: Path to archive file or file-like object
         extract_dir: Directory to extract contents to
         progress_header: If set, show a progress bar with this header
-        progress: fraction callback (0..1, ends at 1.0); overrides progress_header
 
     Raises:
         TypeError: If archive is not a valid type
@@ -619,9 +605,7 @@ def archive_extract_all(
                 break
         if matched_fct is None:
             raise ValueError("Unsupported archive format")
-        matched_fct(
-            archive_ref, extract_dir, progress_header=progress_header, progress=progress
-        )
+        matched_fct(archive_ref, extract_dir, progress_header=progress_header)
 
 
 def _open_ranged(
@@ -785,17 +769,13 @@ def _stream_response_to_file(
 # hammering the host or the mirrors.
 BATCH_DOWNLOAD_WORKERS = 4
 
-# Concurrent archive extractions per batch; unpacking stops scaling well
-# before high core counts since the workers share one disk.
-BATCH_EXTRACT_WORKERS = 10
-
 
 def run_batch_downloads(
     header: str,
     jobs: list[tuple[str, int, Callable[[Callable[[int], None]], None]]],
     max_workers: int = BATCH_DOWNLOAD_WORKERS,
 ) -> list[tuple[str, BaseException]]:
-    """Run ``(name, size, fetch)`` jobs concurrently under one bar.
+    """Run ``(name, size, fetch)`` download jobs concurrently under one bar.
 
     Each ``fetch(tracker)`` reports absolute byte counts; the bar total is
     the sum of the sizes. Failures are returned after the bar is done so
@@ -1025,26 +1005,15 @@ def resume_fetch_job(
     return fetch
 
 
-def is_expected_fetch_error(err: BaseException) -> bool:
-    """Download failures the callers degrade on, vs programming errors."""
-    from esphome.core import EsphomeError  # local import avoids circular dependency
-
-    return isinstance(err, (EsphomeError, OSError))
-
-
-def warn_batch_failures(
+def warn_prefetch_failures(
     failures: list[tuple[str, BaseException]],
     message: str = "Could not prefetch %s: %s",
 ) -> None:
-    """Warn per failed batch job, keeping the traceback of unexpected errors."""
+    """Warn per failed batch-prefetch job; the caller's installer retries them."""
     for name, err in failures:
         # failure_reason: a message-less exception must not log blank
-        if is_expected_fetch_error(err):
-            _LOGGER.warning(message, name, failure_reason(err))
-            _LOGGER.debug("Failure detail", exc_info=err)
-        else:
-            # A programming error must not be reduced to a bare message
-            _LOGGER.warning(message, name, failure_reason(err), exc_info=err)
+        _LOGGER.warning(message, name, failure_reason(err))
+        _LOGGER.debug("Prefetch failure detail", exc_info=err)
 
 
 def download_with_resume(

esphome/happy_eyeballs.py

@@ -69,7 +69,10 @@ def _make_create_connection() -> Callable[..., socket.socket]:
 
     from aiohappyeyeballs import start_connection
     from urllib3.exceptions import LocationParseError
-    from urllib3.util.connection import _set_socket_options, allowed_gai_family  # noqa: PLC2701
+    from urllib3.util.connection import (  # noqa: PLC2701
+        _set_socket_options,
+        allowed_gai_family,
+    )
     from urllib3.util.timeout import _DEFAULT_TIMEOUT  # noqa: PLC2701
 
     from esphome import async_thread

esphome/platformio/library.py

@@ -35,7 +35,7 @@ from esphome.framework_helpers import (
     failure_reason,
     rmdir,
     run_batch_downloads,
-    warn_batch_failures,
+    warn_prefetch_failures,
 )
 
 _LOGGER = logging.getLogger(__name__)
@@ -616,15 +616,11 @@ def _make_registry_client() -> Any:
     elsewhere, not by the PlatformIO registry.
     """
     from platformio.package.manager._registry import PackageManagerRegistryMixin
-    from platformio.registry.client import RegistryClient
 
     class _Registry(PackageManagerRegistryMixin):
         def __init__(self) -> None:
+            self._registry_client = None
             self.pkg_type = "library"
-            self._registry_client = RegistryClient()
-            # The probe sleeps ~500 ms per lookup (see runner.patch_registry_private_packages);
-            # instance-level so the ESPHome process never patches PlatformIO's class
-            self._registry_client.allowed_private_packages = lambda: False
 
         @staticmethod
         def is_system_compatible(value: Any, custom_system: Any = None) -> bool:
@@ -1095,7 +1091,7 @@ def _prefetch_wave(
             + [(c.name, 0, partial(_clone_source, c, salt, namespace)) for c in clones],
         )
         # The sequential call below retries and raises the real error
-        warn_batch_failures(
+        warn_prefetch_failures(
             failures, "Prefetch of %s failed (retrying sequentially): %s"
         )
     except Exception as err:  # noqa: BLE001  # pylint: disable=broad-exception-caught

esphome/platformio/pch.py.script

@@ -1,416 +0,0 @@
-import hashlib
-import os
-from pathlib import Path
-import posixpath
-import re
-import shlex
-import stat
-import subprocess
-import traceback
-
-# pylint: disable=E0602
-Import("env")  # noqa: F821
-_projenv_error = None
-try:
-    Import("projenv")  # noqa: F821
-except Exception as err:  # noqa: BLE001 -- not exported under -t nobuild
-    projenv = None
-    _projenv_error = err
-
-# Precompile the src force-includes plus defines.h and force-include the
-# result into C++ src compiles only; their preprocessed output is unchanged.
-# Registration is gated host-side (pch_enabled()). Keep the closure, ccache
-# values, probe flow, stamp flow, and env-knob spellings in sync with
-# build_helpers/pch.py.
-
-# Compiler failures that clear on their own must not latch the .failed marker
-_TRANSIENT_ERRORS = ("No space left", "Cannot allocate", "Resource temporarily")
-
-# Keep in sync with helpers.TRUTHY_ENV_STRINGS / FALSY_ENV_STRINGS
-_TRUTHY = ("1", "true", "yes", "on", "enable")
-_FALSY = ("", "0", "false", "no", "off", "disable")
-_STRICT_RAW = os.environ.get("ESPHOME_PCH_STRICT")
-_STRICT_VALUE = (_STRICT_RAW or "").strip().lower()
-_STRICT = _STRICT_VALUE in _TRUTHY
-if _STRICT_RAW is not None and _STRICT_VALUE not in _TRUTHY + _FALSY:
-    # A typo must not silently turn the gate into a no-op
-    raise RuntimeError(f"Unrecognized ESPHOME_PCH_STRICT={_STRICT_RAW!r}; use 1 or 0")
-
-_INCLUDE_RE = re.compile(rb'^\s*#\s*include\s+["<]([^">]+)[">]', re.MULTILINE)
-_CORE_HEADER = "esphome/core/defines.h"
-
-
-def _raise_walk_error(err: OSError) -> None:
-    raise err
-
-
-def _resolves_dir(path: Path) -> bool:
-    """False when missing; other stat failures propagate."""
-    try:
-        return stat.S_ISDIR(path.stat().st_mode)
-    except (FileNotFoundError, NotADirectoryError):
-        return False
-
-
-def _resolves(path: Path) -> bool:
-    """False when missing; other stat failures propagate (identity unknown)."""
-    try:
-        return stat.S_ISREG(path.stat().st_mode)
-    except (FileNotFoundError, NotADirectoryError):
-        return False
-
-
-def _include_closure(src_dir: Path, roots: list) -> dict:
-    """Quoted-include closure: src-relative name -> contents (mirror of
-    build_helpers/pch.py)."""
-    seen = {}
-    stack = [(name, "") for name in roots]
-    while stack:
-        name, from_dir = stack.pop()
-        for candidate in (f"{from_dir}/{name}" if from_dir else name, name):
-            rel = posixpath.normpath(candidate)
-            if not rel.startswith("..") and _resolves(src_dir / rel):
-                break
-        else:
-            continue
-        if rel in seen:
-            continue
-        try:
-            data = (src_dir / rel).read_bytes()
-        except OSError as err:
-            # A marker would truncate the transitive walk; fail closed
-            print(f"ESPHome: could not read {rel} for the pch checksum: {err}")
-            raise
-        seen[rel] = data
-        parent = posixpath.dirname(rel)
-        stack.extend(
-            (inc.decode(errors="surrogateescape"), parent)
-            for inc in _INCLUDE_RE.findall(data)
-        )
-    return seen
-
-
-def _shell_arg(element) -> str | None:
-    """One compiler argv from one SCons element, matching the real spawn:
-    spaced elements pass whole, the rest get one shell unquote (skipped on
-    Windows, where shlex would eat path backslashes)."""
-    arg = str(element)
-    if " " in arg or os.name == "nt":
-        return arg.replace('\\"', '"')
-    if not arg.strip():
-        return arg
-    try:
-        tokens = shlex.split(arg)
-    except ValueError as err:
-        print(f"ESPHome: could not lex flag {arg!r} for the pch: {err}")
-        return None
-    if len(tokens) != 1:
-        # A flag the model cannot reproduce would diverge the .gch's flags
-        print(f"ESPHome: cannot model flag {arg!r} for the pch")
-        return None
-    return tokens[0]
-
-
-def _compile_gch(cxx, flags, header: Path, gch: Path, proj_dir: Path):
-    """Compile the .gch, then probe that the toolchain can load it back
-    (GCC 10 on macOS arm64 rejects its own per-process). Returns an error
-    string or None; OSError propagates as transient."""
-    result = subprocess.run(  # noqa: PLW1510
-        [cxx, "-x", "c++-header", *flags, "-c", str(header), "-o", str(gch)],
-        cwd=proj_dir,
-        # C locale keeps diagnostics matchable by _TRANSIENT_ERRORS
-        env={**os.environ, "LC_ALL": "C"},
-        capture_output=True,
-        text=True,
-    )
-    if result.returncode < 0:
-        # Signal-killed (OOM, ^C): route to the transient no-marker path
-        raise OSError(f"compiler killed by signal {-result.returncode}")
-    if result.returncode != 0:
-        return result.stderr
-    return _probe_gch(cxx, flags, header, proj_dir)
-
-
-def _probe_run(cxx, flags, extra, proj_dir: Path):
-    probe = subprocess.run(  # noqa: PLW1510
-        [cxx, *flags, *extra, "-fsyntax-only", "-x", "c++", "-"],
-        cwd=proj_dir,
-        env={**os.environ, "LC_ALL": "C"},
-        input="",
-        capture_output=True,
-        text=True,
-    )
-    if probe.returncode < 0:
-        raise OSError(f"probe killed by signal {-probe.returncode}")
-    return probe
-
-
-def _probe_gch(cxx, flags, header: Path, proj_dir: Path):
-    """Load-check an existing .gch; error string or None. Rejection must
-    be a nonzero exit (keep in sync with pch_probe_args); a baseline run
-    without the pch keeps environmental failures from being blamed on it."""
-    # -MF is only legal alongside a dependency flag; pass it solely to
-    # redirect a depfile that -MD/-MMD in the flags would otherwise write
-    dep_redirect = (
-        ["-MF", os.devnull]
-        if any(f in ("-MD", "-MMD", "-M", "-MM") for f in flags)
-        else []
-    )
-    probe = _probe_run(
-        cxx,
-        flags,
-        [*dep_redirect, "-Winvalid-pch", "-Werror=invalid-pch", "-include", str(header)],
-        proj_dir,
-    )
-    if probe.returncode == 0:
-        return None
-    baseline = _probe_run(cxx, flags, dep_redirect, proj_dir)
-    if baseline.returncode != 0:
-        # Deterministic and latchable; the transient filter at the caller
-        # keeps resource exhaustion from latching
-        return f"probe cannot run at all: {baseline.stderr.strip()[:200]}"
-    return f"toolchain cannot load the pch: {probe.stderr.strip()}"
-
-
-def _read_stamp(path: Path) -> str:
-    """A corrupt sidecar must read as stale, not kill the pch forever."""
-    try:
-        return path.read_text(encoding="utf-8").strip()
-    except (OSError, UnicodeDecodeError):
-        return ""
-
-
-def _setup_pch() -> bool | None:
-    if projenv is None:
-        print(f"ESPHome: projenv unavailable ({_projenv_error}); skipping pch")
-        try:
-            from SCons.Script import COMMAND_LINE_TARGETS
-        except ImportError:
-            # No SCons is an anomaly under PlatformIO: the unknown state
-            # must not read as success (strict decides fatality at the gate)
-            return False
-        # Expected under -t nobuild (nothing compiles); a missing
-        # projenv on a real compile must not pass strict
-        return "nobuild" in [str(t) for t in COMMAND_LINE_TARGETS]
-    # Project root: SCons compiles run here, so the relative -include
-    # resolves; an absolute path would break cross-device ccache sharing.
-    proj_dir = Path(env.subst("$PROJECT_DIR"))  # noqa: F821
-    src_dir = Path(env.subst("$PROJECT_SRC_DIR"))  # noqa: F821
-    header = proj_dir / "esphome_pch.h"
-    gch = Path(f"{header}.gch")
-    sum_path = Path(f"{gch}.sum")
-
-    cxx = projenv.subst("$CXX")  # noqa: F821
-    # The header holds the -include entries itself, so the .gch compile must
-    # not see them; consumers keep theirs, which the .gch then satisfies.
-    flags = []
-    include_headers = []
-    raw_args = [
-        _shell_arg(element)
-        for element in projenv.subst_list("$CXXFLAGS $CCFLAGS $_CCCOMCOM")[0]  # noqa: F821
-    ]
-    if any(arg is None for arg in raw_args):
-        print("ESPHome: skipping precompiled header: unmodelable flag")
-        return
-    flag_it = iter(raw_args)
-    for tok in flag_it:
-        if tok == "-include":
-            include_headers.append(next(flag_it, ""))
-        elif tok.startswith("-include") and not tok.startswith("-include-"):
-            include_headers.append(tok[len("-include") :])
-        else:
-            flags.append(tok)
-    if any(not name for name in include_headers):
-        print("ESPHome: build_src_flags has a trailing -include; skipping pch")
-        return
-    # Fold only relative names resolving under src/: consumers keep their
-    # own -include entries, so folding an unguarded user header would
-    # include it twice; unfolded ones stay consumer-only.
-    try:
-        folded = [
-            name
-            for name in include_headers
-            if not Path(name).is_absolute() and _resolves(src_dir / name)
-        ]
-    except OSError as err:
-        print(f"ESPHome: skipping precompiled header: {err}")
-        return
-    if unfolded := [n for n in include_headers if n not in folded]:
-        print(f"ESPHome: not precompiling non-src force-includes: {unfolded}")
-    content = "".join(f'#include "{name}"\n' for name in (*folded, _CORE_HEADER))
-
-    digest = hashlib.sha256()
-    digest.update(content.encode(errors="surrogateescape"))
-    digest.update(cxx.encode(errors="surrogateescape"))
-    # Mirror CCACHE_BASEDIR: strip the per-device build path so identical
-    # configs produce identical .sum files and share cache entries
-    flags_id = " ".join(flags)
-    if basedir := os.environ.get("CCACHE_BASEDIR"):
-        flags_id = flags_id.replace(basedir, "")
-    digest.update(flags_id.encode(errors="surrogateescape"))
-    # GCC never validates a .gch against its source headers, and PlatformIO
-    # package paths carry no version, so a package bump must invalidate here
-    platform = env.PioPlatform()  # noqa: F821
-    for package in sorted(platform.packages):
-        try:
-            version = platform.get_package_version(package)
-        except KeyError:
-            # An unresolved manifest must not hash as a constant
-            if platform.get_package(package) is not None:
-                print(f"ESPHome: skipping precompiled header: no version for {package}")
-                return
-            version = None  # absent optional package
-        except Exception as err:  # noqa: BLE001
-            # No trustworthy package identity: a stale .gch could survive
-            print(f"ESPHome: skipping precompiled header: {err}")
-            return
-        digest.update(f"{package}={version}".encode())
-        digest.update(b"\0")
-    try:
-        closure = _include_closure(src_dir, [*folded, _CORE_HEADER])
-    except OSError as err:
-        print(f"ESPHome: skipping precompiled header: {err}")
-        return
-    for rel in sorted(closure):
-        digest.update(rel.encode(errors="surrogateescape"))
-        digest.update(closure[rel])
-        digest.update(b"\0")
-    # Project-local -I dirs (e.g. rp2's lwip_override) hold generated
-    # headers the src closure cannot see; hash them too
-    prev = ""
-    try:
-        for tok in flags:
-            inc = tok[2:] if tok.startswith("-I") and len(tok) > 2 else ""
-            if prev == "-I":
-                inc = tok
-            prev = tok
-            if not inc:
-                continue
-            inc_dir = Path(inc)
-            if not (
-                _resolves_dir(inc_dir)
-                and inc_dir.is_relative_to(proj_dir)
-                and not inc_dir.is_relative_to(src_dir)
-                # Library trees never enter the prefix closure; walking them
-                # would read every library file each build
-                and not inc_dir.is_relative_to(proj_dir / ".piolibdeps")
-                and not inc_dir.is_relative_to(proj_dir / ".pioenvs")
-            ):
-                continue
-            local_headers = []
-            # os.walk with onerror: rglob would swallow unlistable subtrees
-            for root, _dirs, files in os.walk(inc_dir, onerror=_raise_walk_error):
-                local_headers.extend(
-                    Path(root) / f
-                    for f in files
-                    if f.endswith((".h", ".hpp", ".hh", ".inc"))
-                )
-            for local in sorted(local_headers):
-                digest.update(str(local.relative_to(proj_dir)).encode())
-                digest.update(local.read_bytes())
-                digest.update(b"\0")
-    except OSError as err:
-        print(f"ESPHome: skipping precompiled header: {err}")
-        return
-    checksum = digest.hexdigest()
-
-    # The ccache .sum sidecar doubles as the freshness stamp
-    fresh = (
-        header.is_file()
-        and gch.is_file()
-        and sum_path.is_file()
-        and (_read_stamp(sum_path) == checksum)
-    )
-    if fresh and _STRICT:
-        # Rejection is per-process: strict re-proves a cached .gch loads
-        # (mirrors the pch_strict() re-probe in build_helpers/pch.py)
-        error = _probe_gch(cxx, flags, header, proj_dir)
-        if error is not None:
-            print(f"ESPHome: {error}")
-            gch.unlink(missing_ok=True)
-            sum_path.unlink(missing_ok=True)
-            return
-    if not fresh:
-        failed_marker = Path(f"{gch}.failed")
-        if _read_stamp(failed_marker) == checksum:
-            print(
-                "ESPHome: skipping precompiled header (previous attempt "
-                f"failed); delete {failed_marker.name} to retry"
-            )
-            return
-        header.write_text(content, encoding="utf-8")
-        try:
-            error = _compile_gch(cxx, flags, header, gch, proj_dir)
-        except OSError as err:
-            # Transient spawn/IO failure: no marker, retry next build
-            print(f"ESPHome: precompiled header compile did not run: {err}")
-            gch.unlink(missing_ok=True)
-            sum_path.unlink(missing_ok=True)
-            return
-        if error is not None:
-            print("ESPHome: precompiled header failed; compiling without it")
-            print(error)
-            gch.unlink(missing_ok=True)
-            sum_path.unlink(missing_ok=True)
-            if any(m in error for m in _TRANSIENT_ERRORS):
-                # Resource exhaustion clears on its own; retry next build
-                return
-            # Skip retries until a flag/header/platform change alters the checksum
-            failed_marker.write_text(checksum + "\n", encoding="utf-8")
-            return
-        failed_marker.unlink(missing_ok=True)
-        sum_path.write_text(checksum + "\n", encoding="utf-8")
-
-    # Computed first so the flags and env land together: a raise between
-    # them would leave a pch-consuming build without its ccache settings.
-    # projenv["ENV"] aliases os.environ, so these reach all TUs; only
-    # time_macros affects non-pch TUs. User values win.
-    ccache_updates = {
-        key: value
-        for key, value in (
-            ("CCACHE_SLOPPINESS", "pch_defines,time_macros"),
-            ("CCACHE_PCH_EXTSUM", "true"),
-        )
-        if key not in os.environ
-    }
-    sloppiness = os.environ.get("CCACHE_SLOPPINESS")
-    if sloppiness is not None:
-        tokens = {tok.strip() for tok in sloppiness.split(",")}
-        missing = [t for t in ("pch_defines", "time_macros") if t not in tokens]
-        if missing:
-            # Without these ccache declines every pch-consuming compile
-            ccache_updates["CCACHE_SLOPPINESS"] = ",".join((sloppiness, *missing))
-            print(f"ESPHome: adding {','.join(missing)} to CCACHE_SLOPPINESS for the pch")
-    extsum = os.environ.get("CCACHE_PCH_EXTSUM")
-    if extsum is not None and extsum.strip().lower() not in ("1", "true", "yes", "on"):
-        # ccache then hashes the non-reproducible .gch bytes: permanent misses
-        print(f"ESPHome: CCACHE_PCH_EXTSUM={extsum} disables pch caching")
-    # Prepended: GCC only uses a .gch while no other tokens precede it.
-    # The relative name also reaches "pio run -t idedata" output.
-    # -Wno-error: the per-process probe can pass while a later cc1plus
-    # rejects the .gch; that must stay a warning under user -Werror.
-    projenv.Prepend(  # noqa: F821
-        CXXFLAGS=[
-            "-Winvalid-pch",
-            # Strict inverts: a per-process consumer rejection reds the build
-            "-Werror=invalid-pch" if _STRICT else "-Wno-error=invalid-pch",
-            "-include",
-            header.name,
-        ]
-    )
-    projenv["ENV"].update(ccache_updates)  # noqa: F821
-    print("ESPHome: Compiling with precompiled header")
-    return True
-
-
-
-try:
-    _used = _setup_pch()
-except Exception:  # noqa: BLE001 -- a speedup must never break the build
-    if _STRICT:
-        raise
-    print("ESPHome: pch internal error; compiling without it")
-    traceback.print_exc()
-else:
-    if _STRICT and not _used:
-        raise RuntimeError("ESPHOME_PCH_STRICT: precompiled header was not used")

esphome/platformio/prefetch.py

@@ -33,7 +33,6 @@ import time
 from typing import Any, NamedTuple
 
 from esphome.framework_helpers import (
-    BATCH_EXTRACT_WORKERS,
     DownloadLockUnavailable,
     content_length,
     discard_partial_download,
@@ -42,7 +41,7 @@ from esphome.framework_helpers import (
     resume_fetch_job,
     run_batch_downloads,
     wait_for_download_lock,
-    warn_batch_failures,
+    warn_prefetch_failures,
 )
 from esphome.helpers import get_bool_env, get_usable_cpu_count, rmtree
 
@@ -703,7 +702,7 @@ def _preinstall(
     would hang, not fail). Waves skip dependencies; the installed
     manifests feed the next wave. Any failure falls back to pio run.
     """
-    workers = min(get_usable_cpu_count(), len(entries), BATCH_EXTRACT_WORKERS)
+    workers = min(get_usable_cpu_count(), len(entries))
     # One manager per worker (_install mutates instance state); built
     # serially because construction rewires the shared manager logger
     managers: SimpleQueue = SimpleQueue()
@@ -892,7 +891,7 @@ def _prefetch(build_dir: Path, env: str) -> None:
         )
         # PlatformIO retries failed packages itself, without resume
         failures = run_batch_downloads("Downloading PlatformIO packages", jobs)
-        warn_batch_failures(failures)
+        warn_prefetch_failures(failures)
         failed_names = {name for name, _ in failures}
     elif not groups and not unresolved:
         # Record the no-work run so the parent skips the next spawn.
@@ -952,10 +951,8 @@ def main(argv: list[str]) -> int:
     """Subprocess entry point: ``prefetch <build_dir> <env_name>``."""
     from esphome.core import CORE
     from esphome.log import setup_log
-    from esphome.platformio.runner import patch_registry_private_packages
 
     signal.signal(signal.SIGTERM, _sigterm)
-    patch_registry_private_packages()
     raw_level = os.environ.get("ESPHOME_PREFETCH_LOG_LEVEL")
     try:
         level = int(raw_level) if raw_level is not None else logging.INFO

esphome/platformio/registry.py

@@ -14,18 +14,14 @@ from typing import NamedTuple
 
 from esphome.core import EsphomeError
 from esphome.framework_helpers import (
-    BATCH_EXTRACT_WORKERS,
     archive_extract_all,
     download_from_mirrors,
     download_with_resume,
     downloaded_bytes,
-    is_expected_fetch_error,
     rmdir,
     run_batch_downloads,
     wait_for_download_lock,
-    warn_batch_failures,
 )
-from esphome.helpers import get_usable_cpu_count
 from esphome.net_retry import fetch_with_retry, http_request
 
 _LOGGER = logging.getLogger(__name__)
@@ -166,10 +162,6 @@ def _check_layout(name: str, dest: Path, expect: Collection[str]) -> None:
             )
 
 
-# (name, version, dest, mirrors, expect) as accepted by install_packages
-PackageSpec = tuple[str, str, Path, list[str], Collection[str]]
-
-
 class _PendingArchive(NamedTuple):
     name: str
     version: str
@@ -190,26 +182,6 @@ def _already_installed(dest: Path) -> bool:
     return (dest / ".esphome_extracted").is_file()
 
 
-def _batched_download_progress(
-    name: str, version: str, size: int | None, extract_progress: Callable[[float], None]
-) -> Callable[[int], None]:
-    """Download tracker for a batched install: no private bar, no bytes (the
-    shared bar must never run backwards); the zero tick keeps cancellation
-    observable and a real refetch is announced once."""
-    announced = False
-
-    def progress(done: int) -> None:
-        nonlocal announced
-        # size-less registry entries still announce: streaming starts at
-        # done=0, while a verify no-op credits the full file in one tick
-        if not announced and done < (size or 1):
-            _LOGGER.info("Re-downloading %s %s ...", name, version)
-            announced = True
-        extract_progress(0.0)
-
-    return progress
-
-
 def prefetch_packages(
     packages: list[tuple[str, str, Path, list[str]]], downloads_dir: Path
 ) -> None:
@@ -293,7 +265,7 @@ def prefetch_packages(
         [(entry.name, entry.size, partial(_fetch, entry)) for entry in pending],
     )
     for name, err in failures:
-        if is_expected_fetch_error(err):
+        if isinstance(err, (EsphomeError, OSError)):
             # Expected download failures: install_package retries this one
             # itself, with a visible bar
             _LOGGER.debug("Prefetch of %s failed: %s", name, err)
@@ -310,7 +282,6 @@ def install_package(
     mirrors: list[str],
     downloads_dir: Path,
     expect: Collection[str],
-    extract_progress: Callable[[float], None] | None = None,
 ) -> None:
     """Download, verify, and extract one package if not already installed.
 
@@ -318,9 +289,6 @@ def install_package(
     publishes; a mirror override (URL templates with ``{VERSION}``/``{SYSTEM}``
     substitution) is trusted as configured. ``downloads_dir`` holds the
     archive between runs so an interrupted download resumes.
-
-    ``extract_progress`` receives extraction fractions in [0, 1] instead of
-    the private per-file bars (see ``install_packages``).
     """
     if not expect:
         # Layout validation before marker.touch() is the only guard against
@@ -344,14 +312,7 @@ def install_package(
         # Persistent location so an interrupted download resumes across runs.
         downloads_dir.mkdir(parents=True, exist_ok=True)
         archive = _archive_path(downloads_dir, name, version)
-        # Batch header names each package; keep INFO when an archive
-        # unexpectedly needs a real download (the shared bar won't move)
-        log = (
-            _LOGGER.debug
-            if extract_progress is not None and archive.is_file()
-            else _LOGGER.info
-        )
-        log("Downloading %s %s ...", name, version)
+        _LOGGER.info("Downloading %s %s ...", name, version)
         if mirrors:
             _LOGGER.warning(
                 "Downloading %s from a mirror override; checksum verification "
@@ -363,85 +324,11 @@ def install_package(
             )
         else:
             url, sha256, size = registry_download(name, version)
-            download_with_resume(
-                url,
-                archive,
-                sha256=sha256,
-                size=size,
-                progress=None
-                if extract_progress is None
-                else _batched_download_progress(name, version, size, extract_progress),
-            )
-        log("Extracting %s ...", name)
-        archive_extract_all(
-            archive, dest, progress_header="Extracting", progress=extract_progress
-        )
+            download_with_resume(url, archive, sha256=sha256, size=size)
+        _LOGGER.info("Extracting %s ...", name)
+        archive_extract_all(archive, dest, progress_header="Extracting")
         # Validate the layout before recording success, so an unexpected
         # package is never cached as a working install.
         _check_layout(name, dest, expect)
         marker.touch()
         archive.unlink(missing_ok=True)
-
-
-def install_packages(specs: Collection[PackageSpec], downloads_dir: Path) -> None:
-    """Install several packages; prefetched archives extract in parallel under
-    one shared bar, the rest take the sequential ``install_package`` path.
-    The first failure is re-raised."""
-    pending: list[tuple[PackageSpec, int]] = []
-    rest: list[PackageSpec] = []
-    seen: set[str] = set()
-    for spec in specs:
-        name, version, dest, mirrors, _expect = spec
-        archive = _archive_path(downloads_dir, name, version)
-        # Duplicate entries share one archive and would race each other
-        # between two workers; mirror prefetch_packages' dedupe
-        if _already_installed(dest) or mirrors or archive.name in seen:
-            rest.append(spec)
-            continue
-        try:
-            # An archive at its final name already passed sha256/size
-            # verification
-            size = archive.stat().st_size
-        except FileNotFoundError:
-            rest.append(spec)
-            continue
-        seen.add(archive.name)
-        pending.append((spec, size))
-    if len(pending) < 2:
-        for name, version, dest, mirrors, expect in specs:
-            install_package(name, version, dest, mirrors, downloads_dir, expect=expect)
-        return
-    workers = min(get_usable_cpu_count(), len(pending), BATCH_EXTRACT_WORKERS)
-    _LOGGER.info(
-        "Extracting %d package archive(s) with %d worker(s): %s",
-        len(pending),
-        workers,
-        ", ".join(spec[0] for spec, _ in pending),
-    )
-
-    def _install(spec: PackageSpec, size: int, tracker: Callable[[int], None]) -> None:
-        name, version, dest, mirrors, expect = spec
-        install_package(
-            name,
-            version,
-            dest,
-            mirrors,
-            downloads_dir,
-            expect=expect,
-            extract_progress=lambda frac: tracker(int(frac * size)),
-        )
-
-    failures = run_batch_downloads(
-        "Extracting packages",
-        [(spec[0], size, partial(_install, spec, size)) for spec, size in pending],
-        max_workers=workers,
-    )
-    if failures:
-        # Warn on the first failure too: the raised exception's message may
-        # not name which package failed
-        warn_batch_failures(failures, "Could not install %s: %s")
-        raise failures[0][1]
-    # Sequential remainder after the batch, so a duplicate spec cannot
-    # unlink the archive its batched twin was sized from
-    for name, version, dest, mirrors, expect in rest:
-        install_package(name, version, dest, mirrors, downloads_dir, expect=expect)

esphome/platformio/runner.py

@@ -2,8 +2,7 @@
 
 Invoked via ``python -m esphome.platformio.runner`` instead of
 ``python -m platformio`` so that the patches (incremental rebuild
-preservation, download retries, skipping the private-package probe) apply
-inside the subprocess. Running
+preservation, download retries) apply inside the subprocess. Running
 PlatformIO in a subprocess keeps its ``sys.path`` mutations and other
 global state from leaking into the ESPHome process.
 """
@@ -106,16 +105,6 @@ def patch_file_downloader() -> None:
     FileDownloader.__init__ = patched_init
 
 
-def patch_registry_private_packages() -> None:
-    """Skip PlatformIO's private-package probe; it sleeps ~500 ms per lookup.
-
-    ESPHome never uses private packages, so the answer is always False.
-    """
-    from platformio.registry.client import RegistryClient
-
-    RegistryClient.allowed_private_packages = staticmethod(lambda: False)  # type: ignore[method-assign]
-
-
 _IGNORE_LIB_WARNINGS = "(?:Hash|Update)"
 # Regex patterns matched against each line of PlatformIO output. Lines that
 # match are dropped by RedirectText before they reach the parent process.
@@ -163,7 +152,6 @@ FILTER_PLATFORMIO_LINES = [
 def main() -> int:
     patch_structhash()
     patch_file_downloader()
-    patch_registry_private_packages()
 
     # Wrap stdout/stderr with RedirectText before PlatformIO runs:
     #

esphome/platformio/toolchain.py

@@ -289,15 +289,6 @@ def copy_ccache_script() -> None:
     )
 
 
-def copy_pch_script() -> None:
-    """Copy the shared precompiled-header SCons post-script into the build
-    dir; platform components pair it with ``post:pch.py`` in extra_scripts."""
-    copy_file_if_changed(
-        Path(__file__).parent / "pch.py.script",
-        CORE.relative_build_path("pch.py"),
-    )
-
-
 def default_libdeps_dir() -> str:
     """The PLATFORMIO_LIBDEPS_DIR value a pio run defaults to; the package
     prefetch must resolve installed libraries against the same dir."""

esphome/writer.py

@@ -7,7 +7,6 @@ import re
 import time
 
 from esphome import loader
-from esphome.build_helpers.pch import PCH_ARTIFACT_NAMES, PCH_PREFIX_HEADER
 from esphome.compiled_config import save_compiled_config
 from esphome.config import iter_component_configs, iter_components
 from esphome.const import (
@@ -247,7 +246,6 @@ def copy_src_tree():
         Path(
             "esphome/core/ring_buffer.h"
         ),  # moved to components/ring_buffer/, removed in 2026.11.0
-        Path(PCH_PREFIX_HEADER),  # build machinery, not user API
     }
     include_l = []
     for target, _ in source_files_l:
@@ -611,20 +609,11 @@ def clean_build(clear_pio_cache: bool = True, *, full: bool = False):
             if idf_path.is_dir():
                 _LOGGER.info("Deleting %s", idf_path)
                 rmtree(idf_path)
-        # The PlatformIO pch artifacts live at the project root so the
-        # relative -include resolves; a partial clean must drop them too
-        for name in PCH_ARTIFACT_NAMES:
-            CORE.relative_build_path(name).unlink(missing_ok=True)
 
-    # The idedata caches are derived from the build but live under the data
-    # dir, not the build path, so they must be removed separately in both
-    # modes. Globbed (name.json plus name.<backend>.json) so a future
-    # backend suffix cannot silently drift out of clean-all.
-    idedata_dir = CORE.relative_internal_path("idedata")
-    for idedata_cache in (
-        *idedata_dir.glob(f"{CORE.name}.json"),
-        *idedata_dir.glob(f"{CORE.name}.*.json"),
-    ):
+    # The idedata cache is derived from the build but lives under the data dir,
+    # not the build path, so it must be removed separately in both modes.
+    idedata_cache = CORE.relative_internal_path("idedata", f"{CORE.name}.json")
+    if idedata_cache.is_file():
         _LOGGER.info("Deleting %s", idedata_cache)
         idedata_cache.unlink()
 

requirements_dev.txt

@@ -1,4 +1,4 @@
 # Useful stuff when working in a development environment
-clang-format==13.0.1  # .pre-commit-config.yaml rev synced by script/sync_dependency_versions.py
+clang-format==13.0.1  # also change in .pre-commit-config.yaml and Dockerfile when updating
 clang-tidy==22.1.8
-yamllint==1.38.0  # .pre-commit-config.yaml rev synced by script/sync_dependency_versions.py
+yamllint==1.38.0  # also change in .pre-commit-config.yaml when updating

requirements_test.txt

@@ -1,9 +1,8 @@
 pylint==4.0.8
-flake8==7.3.0  # .pre-commit-config.yaml rev synced by script/sync_dependency_versions.py
-ruff==0.16.6  # .pre-commit-config.yaml rev synced by script/sync_dependency_versions.py
-pyupgrade==3.21.2  # .pre-commit-config.yaml rev synced by script/sync_dependency_versions.py
-prek==0.5.2  # .github/workflows/ci.yml reads this pin
-yamlrocks==0.6.1  # used by script/sync_dependency_versions.py
+flake8==7.3.0  # also change in .pre-commit-config.yaml when updating
+ruff==0.16.5  # also change in .pre-commit-config.yaml when updating
+pyupgrade==3.21.2  # also change in .pre-commit-config.yaml when updating
+prek==0.5.1  # also change in .github/workflows/ci.yml when updating
 
 # Unit tests
 pytest==9.1.1

script/api_protobuf/api_protobuf.py

@@ -28,6 +28,11 @@ class WireType(IntEnum):
     END_GROUP = 4  # groups (deprecated)
     FIXED32 = 5  # fixed32, sfixed32, float
 
+    @property
+    def cpp_name(self) -> str:
+        """The matching constant in proto.h."""
+        return f"WIRE_TYPE_{self.name}"
+
 
 # Generate with
 # protoc --python_out=script/api_protobuf -I esphome/components/api/ api_options.proto
@@ -126,9 +131,10 @@ def camel_to_snake(name: str) -> str:
     return re.sub("([a-z0-9])([A-Z])", r"\1_\2", s1).lower()
 
 
-def force_str(force: bool) -> str:
-    """Convert a boolean force value to string format for C++ code."""
-    return str(force).lower()
+def _encode_call(func: str, *args: str, force: bool = False) -> str:
+    """Emit one ProtoEncode call; every helper takes the cursor and returns it advanced."""
+    suffix = "_force" if force else ""
+    return f"pos = ProtoEncode::{func}{suffix}({', '.join(('pos', *args))});"
 
 
 class TypeInfo(ABC):
@@ -223,55 +229,39 @@ class TypeInfo(ABC):
     def class_member(self) -> str:
         return f"{self.cpp_type} {self.field_name}{{{self.default_value}}};"
 
-    @property
-    def decode_varint_content(self) -> str:
-        content = self.decode_varint
-        if content is None:
-            return None
-        return f"case {self.number}: this->{self.field_name} = {content}; break;"
+    def decode_case(self, body: str) -> str:
+        """Emit one decode_field() case, keyed on the field's wire tag."""
+        return f"case proto_tag({self.number}, {self.wire_type.cpp_name}):\n" + indent(
+            f"{body}\nbreak;"
+        )
 
-    decode_varint = None
+    # Expression that reads this field from `value`; None when the type is never decoded.
+    decode_expr: str | None = None
+
+    def _decode_store(self, expr: str) -> str:
+        return f"this->{self.field_name} = {expr};"
 
     @property
-    def decode_length_content(self) -> str:
-        content = self.decode_length
-        if content is None:
-            return None
-        return f"case {self.number}: this->{self.field_name} = {content}; break;"
-
-    decode_length = None
-
-    @property
-    def decode_32bit_content(self) -> str:
-        content = self.decode_32bit
-        if content is None:
-            return None
-        return f"case {self.number}: this->{self.field_name} = {content}; break;"
-
-    decode_32bit = None
-
-    @property
-    def decode_64bit_content(self) -> str:
-        content = self.decode_64bit
-        if content is None:
-            return None
-        return f"case {self.number}: this->{self.field_name} = {content}; break;"
-
-    decode_64bit = None
+    def decode_content(self) -> str | None:
+        """The decode_field() case for this field, or None when it is never decoded."""
+        expr = self.decode_expr
+        return None if expr is None else self.decode_case(self._decode_store(expr))
 
     # Mapping from encode_func to raw encode expression template.
     # When a forced field has a single-byte tag, the code generator emits
     # write_raw_byte(tag) + raw encode instead of the full encode_* method,
     # eliminating the zero-check branch and encode_field_raw indirection.
     # {value} is replaced with the actual field expression.
-    RAW_ENCODE_MAP: dict[str, str] = {
-        "encode_uint32": "ProtoEncode::encode_varint_raw(pos, {value});",
-        "encode_uint64": "ProtoEncode::encode_varint_raw_64(pos, {value});",
-        "encode_sint32": "ProtoEncode::encode_varint_raw_short(pos, encode_zigzag32({value}));",
-        "encode_sint64": "ProtoEncode::encode_varint_raw_64(pos, encode_zigzag64({value}));",
-        "encode_int64": "ProtoEncode::encode_varint_raw_64(pos, static_cast<uint64_t>({value}));",
-        "encode_bool": "ProtoEncode::write_raw_byte(pos, {value} ? 0x01 : 0x00);",
+    RAW_ENCODE_MAP: dict[str, tuple[str, str]] = {
+        "encode_uint32": ("encode_varint_raw", "{value}"),
+        "encode_uint64": ("encode_varint_raw_64", "{value}"),
+        "encode_sint32": ("encode_varint_raw_short", "encode_zigzag32({value})"),
+        "encode_sint64": ("encode_varint_raw_64", "encode_zigzag64({value})"),
+        "encode_int64": ("encode_varint_raw_64", "static_cast<uint64_t>({value})"),
+        "encode_bool": ("write_raw_byte", "{value} ? 0x01 : 0x00"),
     }
+    # Fixed32 value expression for the shared tag+fixed32 writer; None for other wire types
+    fixed32_value_template: str | None = None
 
     def _encode_with_precomputed_tag(self, value_expr: str) -> str | None:
         """Try to emit a precomputed-tag encode for a field.
@@ -288,12 +278,17 @@ class TypeInfo(ABC):
             return None
         max_val = self.max_value
         # Only use RAW_ENCODE_MAP for forced fields or fields with max_value
-        raw_expr = None
+        raw = None
         if self.force or max_val is not None:
-            raw_expr = self.RAW_ENCODE_MAP.get(self.encode_func)
-        if raw_expr is None:
+            raw = self.RAW_ENCODE_MAP.get(self.encode_func)
+        if raw is None:
             return None
-        body = f"ProtoEncode::write_raw_byte(pos, {tag});\n{raw_expr.format(value=value_expr)}"
+        func, arg = raw
+        body = (
+            _encode_call("write_raw_byte", str(tag))
+            + "\n"
+            + _encode_call(func, arg.format(value=value_expr))
+        )
         if self.force:
             return body
         # Non-forced with max_value: inline zero-check + raw encode
@@ -314,23 +309,44 @@ class TypeInfo(ABC):
             return None
         # When max_len < 128, length varint is always 1 byte
         len_encode = (
-            f"ProtoEncode::write_raw_byte(pos, static_cast<uint8_t>({len_expr}));"
+            _encode_call("write_raw_byte", f"static_cast<uint8_t>({len_expr})")
             if max_len is not None and max_len < 128
-            else f"ProtoEncode::encode_varint_raw(pos, {len_expr});"
+            else _encode_call("encode_varint_raw", len_expr)
         )
+        return "\n".join(
+            (
+                _encode_call("write_raw_byte", str(tag)),
+                len_encode,
+                _encode_call("encode_raw", data_expr, len_expr),
+            )
+        )
+
+    def _encode_fixed32_with_precomputed_tag(self, value: str) -> str | None:
+        """Single-byte tag fixed32 write, or None for other types and multi-byte tags."""
+        tag = self.calculate_tag()
+        if self.fixed32_value_template is None or tag >= 128:
+            return None
+        value_expr = self.fixed32_value_template.format(value=value)
+        if self.force:
+            return _encode_call("write_tag_and_fixed32", str(tag), value_expr)
         return (
-            f"ProtoEncode::write_raw_byte(pos, {tag});\n"
-            f"{len_encode}\n"
-            f"ProtoEncode::encode_raw(pos, {data_expr}, {len_expr});"
+            f"if (uint32_t raw = {value_expr}; raw != 0) [[likely]] {{\n"
+            f"  {_encode_call('write_tag_and_fixed32', str(tag), 'raw')}\n"
+            "}"
         )
 
     @property
     def encode_content(self) -> str:
-        if result := self._encode_with_precomputed_tag(f"this->{self.field_name}"):
+        value = f"this->{self.field_name}"
+        if result := self._encode_with_precomputed_tag(value):
             return result
-        if self.force:
-            return f"ProtoEncode::{self.encode_func}(pos, {self.number}, this->{self.field_name}, true);"
-        return f"ProtoEncode::{self.encode_func}(pos, {self.number}, this->{self.field_name});"
+        if result := self._encode_fixed32_with_precomputed_tag(value):
+            return result
+        return _encode_call(self.encode_func, str(self.number), value, force=self.force)
+
+    def encode_element(self, number: int, element: str) -> str:
+        """Encode one element of a repeated field; elements are always written."""
+        return _encode_call(self.encode_func, str(number), element, force=True)
 
     encode_func = None
 
@@ -605,7 +621,6 @@ class DoubleType(FixedSizeTypeMixin, TypeInfo):
     # Unsupported but defined for completeness
     cpp_type = "double"
     default_value = "0.0"
-    decode_64bit = "value.as_double()"
     encode_func = "encode_double"
     wire_type = WireType.FIXED64  # Uses wire type 1 according to protobuf spec
 
@@ -631,10 +646,12 @@ class DoubleType(FixedSizeTypeMixin, TypeInfo):
 class FloatType(FixedSizeTypeMixin, TypeInfo):
     cpp_type = "float"
     default_value = "0.0f"
-    decode_32bit = "value.as_float()"
+    decode_expr = "value.as_float()"
     encode_func = "encode_float"
     wire_type = WireType.FIXED32  # Uses wire type 5
 
+    fixed32_value_template = "float_to_raw({value})"
+
     def dump(self, name: str) -> str:
         o = f'snprintf(buffer, sizeof(buffer), "%g", {name});\n'
         o += "out.append(buffer);"
@@ -658,7 +675,7 @@ class Int64Type(VarintTypeMixin, TypeInfo):
     cpp_type = "int64_t"
     _varint_max_bits = 64
     default_value = "0"
-    decode_varint = "static_cast<int64_t>(value)"
+    decode_expr = "static_cast<int64_t>(value.as_varint())"
     encode_func = "encode_int64"
     wire_type = WireType.VARINT  # Uses wire type 0
 
@@ -679,7 +696,7 @@ class UInt64Type(VarintTypeMixin, TypeInfo):
     cpp_type = "uint64_t"
     _varint_max_bits = 64
     default_value = "0"
-    decode_varint = "value"
+    decode_expr = "value.as_varint()"
     encode_func = "encode_uint64"
     wire_type = WireType.VARINT  # Uses wire type 0
 
@@ -697,11 +714,11 @@ class UInt64Type(VarintTypeMixin, TypeInfo):
         return self._get_simple_size_calculation(name, force, "uint64")
 
     @property
-    def RAW_ENCODE_MAP(self) -> dict[str, str]:  # noqa: N802
+    def RAW_ENCODE_MAP(self) -> dict[str, tuple[str, str]]:  # noqa: N802
         if self.mac_address:
             return {
                 **TypeInfo.RAW_ENCODE_MAP,
-                "encode_uint64": "ProtoEncode::encode_varint_raw_48bit(pos, {value});",
+                "encode_uint64": ("encode_varint_raw_48bit", "{value}"),
             }
         return TypeInfo.RAW_ENCODE_MAP
 
@@ -714,7 +731,7 @@ class Int32Type(VarintTypeMixin, TypeInfo):
     cpp_type = "int32_t"
     _varint_max_bits = 64  # int32 is sign-extended to 64 bits in protobuf
     default_value = "0"
-    decode_varint = "static_cast<int32_t>(value)"
+    decode_expr = "static_cast<int32_t>(value.as_varint())"
     encode_func = "encode_int32"
     wire_type = WireType.VARINT  # Uses wire type 0
 
@@ -734,7 +751,6 @@ class Int32Type(VarintTypeMixin, TypeInfo):
 class Fixed64Type(FixedSizeTypeMixin, TypeInfo):
     cpp_type = "uint64_t"
     default_value = "0"
-    decode_64bit = "value.as_fixed64()"
     encode_func = "encode_fixed64"
     wire_type = WireType.FIXED64  # Uses wire type 1
 
@@ -760,7 +776,7 @@ class Fixed64Type(FixedSizeTypeMixin, TypeInfo):
 class Fixed32Type(FixedSizeTypeMixin, TypeInfo):
     cpp_type = "uint32_t"
     default_value = "0"
-    decode_32bit = "value.as_fixed32()"
+    decode_expr = "value.as_fixed32()"
     encode_func = "encode_fixed32"
     wire_type = WireType.FIXED32  # Uses wire type 5
 
@@ -769,15 +785,7 @@ class Fixed32Type(FixedSizeTypeMixin, TypeInfo):
         o += "out.append(buffer);"
         return o
 
-    @property
-    def encode_content(self) -> str:
-        tag = self.calculate_tag()
-        if self.force and tag < 128:
-            # Emit combined tag+value write: precomputed tag + direct memcpy
-            return f"ProtoEncode::write_tag_and_fixed32(pos, {tag}, this->{self.field_name});"
-        if self.force:
-            return f"ProtoEncode::{self.encode_func}(pos, {self.number}, this->{self.field_name}, true);"
-        return f"ProtoEncode::{self.encode_func}(pos, {self.number}, this->{self.field_name});"
+    fixed32_value_template = "{value}"
 
     def get_size_calculation(self, name: str, force: bool = False) -> str:
         field_id_size = self.calculate_field_id_size()
@@ -797,7 +805,7 @@ class BoolType(VarintTypeMixin, TypeInfo):
     _varint_max_bits = 1
     cpp_type = "bool"
     default_value = "false"
-    decode_varint = "value != 0"
+    decode_expr = "value.as_bool()"
     encode_func = "encode_bool"
     wire_type = WireType.VARINT  # Uses wire type 0
 
@@ -817,7 +825,7 @@ class StringType(TypeInfo):
     default_value = ""
     reference_type = "std::string &"
     const_reference_type = "const std::string &"
-    decode_length = "value.as_string()"
+    decode_expr = "value.as_string()"
     encode_func = "encode_string"
     wire_type = WireType.LENGTH_DELIMITED  # Uses wire type 2
 
@@ -851,9 +859,12 @@ class StringType(TypeInfo):
             f"this->{self.field_name}_ref_.size()",
         ):
             return result
-        if self.force:
-            return f"ProtoEncode::encode_string(pos, {self.number}, this->{self.field_name}_ref_, true);"
-        return f"ProtoEncode::encode_string(pos, {self.number}, this->{self.field_name}_ref_);"
+        return _encode_call(
+            "encode_string",
+            str(self.number),
+            f"this->{self.field_name}_ref_",
+            force=self.force,
+        )
 
     def dump(self, name):
         # If name is 'it', this is a repeated field element - always use string
@@ -929,6 +940,9 @@ class MessageType(TypeInfo):
     def can_use_dump_field(cls) -> bool:
         return False
 
+    def encode_element(self, number: int, element: str) -> str:
+        return _encode_call("encode_sub_message", "buffer", str(number), element)
+
     @property
     def cpp_type(self) -> str:
         return self._field.type_name[1:]
@@ -951,15 +965,9 @@ class MessageType(TypeInfo):
     @property
     def encode_content(self) -> str:
         # Sub-message encoding needs buffer for backpatch/sync
-        return f"ProtoEncode::{self.encode_func}(pos, buffer, {self.number}, this->{self.field_name});"
-
-    @property
-    def decode_length(self) -> str:
-        # Override to return None for message types because we can't use template-based
-        # decoding when the specific message type isn't known at compile time.
-        # Instead, we use the non-template decode_to_message() method which allows
-        # runtime polymorphism through virtual function calls.
-        return None
+        return _encode_call(
+            self.encode_func, "buffer", str(self.number), f"this->{self.field_name}"
+        )
 
     @property
     def public_content(self) -> list[str]:
@@ -976,19 +984,14 @@ class MessageType(TypeInfo):
         )
 
     @property
-    def decode_length_content(self) -> str:
-        # Custom decode that doesn't use templates
+    def decode_content(self) -> str:
+        body = f"value.decode_to_message(this->{self.field_name});"
         if self._track_presence:
             # decode_to_message() cannot report failure, so setting the flag
             # afterwards only documents intent; a status-returning decode could
             # gate it for real without touching callers.
-            return (
-                f"case {self.number}:\n"
-                f"      value.decode_to_message(this->{self.field_name});\n"
-                f"      this->has_{self.name} = true;\n"
-                f"      break;"
-            )
-        return f"case {self.number}: value.decode_to_message(this->{self.field_name}); break;"
+            body += f"\nthis->has_{self.name} = true;"
+        return self.decode_case(body)
 
     def dump(self, name: str) -> str:
         return f"{name}.dump_to(out);"
@@ -1027,7 +1030,7 @@ class BytesType(TypeInfo):
     reference_type = "std::string &"
     const_reference_type = "const std::string &"
     encode_func = "encode_bytes"
-    decode_length = "value.as_string()"
+    decode_expr = "value.as_string()"
     wire_type = WireType.LENGTH_DELIMITED  # Uses wire type 2
 
     @property
@@ -1058,9 +1061,13 @@ class BytesType(TypeInfo):
             f"this->{self.field_name}_ptr_", f"this->{self.field_name}_len_"
         ):
             return result
-        if self.force:
-            return f"ProtoEncode::encode_bytes(pos, {self.number}, this->{self.field_name}_ptr_, this->{self.field_name}_len_, true);"
-        return f"ProtoEncode::encode_bytes(pos, {self.number}, this->{self.field_name}_ptr_, this->{self.field_name}_len_);"
+        return _encode_call(
+            "encode_bytes",
+            str(self.number),
+            f"this->{self.field_name}_ptr_",
+            f"this->{self.field_name}_len_",
+            force=self.force,
+        )
 
     def dump(self, name: str) -> str:
         ptr_dump = f"format_hex_pretty(this->{self.field_name}_ptr_, this->{self.field_name}_len_)"
@@ -1133,11 +1140,6 @@ class PointerToBufferTypeBase(TypeInfo):
         super().__init__(field)
         self.array_size = 0
 
-    @property
-    def decode_length(self) -> str | None:
-        # This is handled in decode_length_content
-        return None
-
     @property
     def wire_type(self) -> WireType:
         """Get the wire type for this field."""
@@ -1170,17 +1172,20 @@ class PointerToBytesBufferType(PointerToBufferTypeBase):
             f"this->{self.field_name}", f"this->{self.field_name}_len"
         ):
             return result
-        if self.force:
-            return f"ProtoEncode::encode_bytes(pos, {self.number}, this->{self.field_name}, this->{self.field_name}_len, true);"
-        return f"ProtoEncode::encode_bytes(pos, {self.number}, this->{self.field_name}, this->{self.field_name}_len);"
+        return _encode_call(
+            "encode_bytes",
+            str(self.number),
+            f"this->{self.field_name}",
+            f"this->{self.field_name}_len",
+            force=self.force,
+        )
 
     @property
-    def decode_length_content(self) -> str | None:
-        return f"""case {self.number}: {{
-      this->{self.field_name} = value.data();
-      this->{self.field_name}_len = value.size();
-      break;
-    }}"""
+    def decode_content(self) -> str:
+        return self.decode_case(
+            f"this->{self.field_name} = value.data();\n"
+            f"this->{self.field_name}_len = value.size();",
+        )
 
     def dump(self, name: str) -> str:
         return (
@@ -1224,24 +1229,26 @@ class PointerToStringBufferType(PointerToBufferTypeBase):
         if max_len is not None and max_len < 128 and self.force:
             tag = self.calculate_tag()
             if tag < 128:
-                return f"ProtoEncode::encode_short_string_force(pos, {tag}, this->{self.field_name});"
+                return _encode_call(
+                    "encode_short_string_force", str(tag), f"this->{self.field_name}"
+                )
         if result := self._encode_bytes_with_precomputed_tag(
             f"this->{self.field_name}.c_str()",
             f"this->{self.field_name}.size()",
         ):
             return result
-        if self.force:
-            return f"ProtoEncode::encode_string(pos, {self.number}, this->{self.field_name}, true);"
-        return (
-            f"ProtoEncode::encode_string(pos, {self.number}, this->{self.field_name});"
+        return _encode_call(
+            "encode_string",
+            str(self.number),
+            f"this->{self.field_name}",
+            force=self.force,
         )
 
     @property
-    def decode_length_content(self) -> str | None:
-        return f"""case {self.number}: {{
-      this->{self.field_name} = StringRef(reinterpret_cast<const char *>(value.data()), value.size());
-      break;
-    }}"""
+    def decode_content(self) -> str:
+        return self.decode_case(
+            f"this->{self.field_name} = StringRef(value.data(), value.size());",
+        )
 
     def dump(self, name: str) -> str:
         # Not used since we use dump_field, but required by abstract base class
@@ -1310,14 +1317,13 @@ class PackedBufferTypeInfo(TypeInfo):
         ]
 
     @property
-    def decode_length_content(self) -> str:
+    def decode_content(self) -> str:
         """Store pointer to buffer and calculate count of packed varints."""
-        return f"""case {self.number}: {{
-      this->{self.field_name}_data_ = value.data();
-      this->{self.field_name}_length_ = value.size();
-      this->{self.field_name}_count_ = count_packed_varints(value.data(), value.size());
-      break;
-    }}"""
+        return self.decode_case(
+            f"this->{self.field_name}_data_ = value.data();\n"
+            f"this->{self.field_name}_length_ = value.size();\n"
+            f"this->{self.field_name}_count_ = count_packed_varints(value.data(), value.size());",
+        )
 
     @property
     def encode_content(self) -> str:
@@ -1402,17 +1408,11 @@ class FixedArrayBytesType(TypeInfo):
         ]
 
     @property
-    def decode_length_content(self) -> str:
-        o = f"case {self.number}: {{\n"
-        o += "  const std::string &data_str = value.as_string();\n"
-        o += f"  this->{self.field_name}_len = data_str.size();\n"
-        o += f"  if (this->{self.field_name}_len > {self.array_size}) {{\n"
-        o += f"    this->{self.field_name}_len = {self.array_size};\n"
-        o += "  }\n"
-        o += f"  memcpy(this->{self.field_name}, data_str.data(), this->{self.field_name}_len);\n"
-        o += "  break;\n"
-        o += "}"
-        return o
+    def decode_content(self) -> str:
+        return self.decode_case(
+            f"this->{self.field_name}_len = std::min<size_t>(value.size(), {self.array_size});\n"
+            f"memcpy(this->{self.field_name}, value.data(), this->{self.field_name}_len);",
+        )
 
     @property
     def encode_content(self) -> str:
@@ -1421,9 +1421,13 @@ class FixedArrayBytesType(TypeInfo):
             f"this->{self.field_name}", f"this->{self.field_name}_len", max_len=max_len
         ):
             return result
-        if self.force:
-            return f"ProtoEncode::encode_bytes(pos, {self.number}, this->{self.field_name}, this->{self.field_name}_len, true);"
-        return f"ProtoEncode::encode_bytes(pos, {self.number}, this->{self.field_name}, this->{self.field_name}_len);"
+        return _encode_call(
+            "encode_bytes",
+            str(self.number),
+            f"this->{self.field_name}",
+            f"this->{self.field_name}_len",
+            force=self.force,
+        )
 
     def dump(self, name: str) -> str:
         return f"out.append(format_hex_pretty({name}, {name}_len));"
@@ -1471,7 +1475,7 @@ class UInt32Type(VarintTypeMixin, TypeInfo):
     cpp_type = "uint32_t"
     _varint_max_bits = 32
     default_value = "0"
-    decode_varint = "value"
+    decode_expr = "value.as_varint()"
     encode_func = "encode_uint32"
     wire_type = WireType.VARINT  # Uses wire type 0
 
@@ -1494,13 +1498,21 @@ class UInt32Type(VarintTypeMixin, TypeInfo):
 class EnumType(VarintTypeMixin, TypeInfo):
     _varint_max_bits = 32
 
+    def encode_element(self, number: int, element: str) -> str:
+        return _encode_call(
+            self.encode_func,
+            str(number),
+            f"static_cast<uint32_t>({element})",
+            force=True,
+        )
+
     @property
     def cpp_type(self) -> str:
         return f"enums::{self._field.type_name[1:]}"
 
     @property
-    def decode_varint(self) -> str:
-        return f"static_cast<{self.cpp_type}>(value)"
+    def decode_expr(self) -> str:
+        return f"static_cast<{self.cpp_type}>(value.as_varint())"
 
     default_value = ""
     wire_type = WireType.VARINT  # Uses wire type 0
@@ -1520,9 +1532,9 @@ class EnumType(VarintTypeMixin, TypeInfo):
     @property
     def encode_content(self) -> str:
         value_expr = f"static_cast<uint32_t>(this->{self.field_name})"
-        if self.force:
-            return f"ProtoEncode::{self.encode_func}(pos, {self.number}, {value_expr}, true);"
-        return f"ProtoEncode::{self.encode_func}(pos, {self.number}, {value_expr});"
+        return _encode_call(
+            self.encode_func, str(self.number), value_expr, force=self.force
+        )
 
     def dump(self, name: str) -> str:
         return f"out.append_p(proto_enum_to_string<{self.cpp_type}>({name}));"
@@ -1547,7 +1559,7 @@ class EnumType(VarintTypeMixin, TypeInfo):
 class SFixed32Type(FixedSizeTypeMixin, TypeInfo):
     cpp_type = "int32_t"
     default_value = "0"
-    decode_32bit = "value.as_sfixed32()"
+    decode_expr = "value.as_sfixed32()"
     encode_func = "encode_sfixed32"
     wire_type = WireType.FIXED32  # Uses wire type 5
 
@@ -1573,7 +1585,6 @@ class SFixed32Type(FixedSizeTypeMixin, TypeInfo):
 class SFixed64Type(FixedSizeTypeMixin, TypeInfo):
     cpp_type = "int64_t"
     default_value = "0"
-    decode_64bit = "value.as_sfixed64()"
     encode_func = "encode_sfixed64"
     wire_type = WireType.FIXED64  # Uses wire type 1
 
@@ -1600,7 +1611,7 @@ class SInt32Type(VarintTypeMixin, TypeInfo):
     cpp_type = "int32_t"
     _varint_max_bits = 32  # zigzag encoding keeps it 32-bit
     default_value = "0"
-    decode_varint = "decode_zigzag32(static_cast<uint32_t>(value))"
+    decode_expr = "decode_zigzag32(static_cast<uint32_t>(value.as_varint()))"
     encode_func = "encode_sint32"
     wire_type = WireType.VARINT  # Uses wire type 0
 
@@ -1621,7 +1632,7 @@ class SInt64Type(VarintTypeMixin, TypeInfo):
     cpp_type = "int64_t"
     _varint_max_bits = 64
     default_value = "0"
-    decode_varint = "decode_zigzag64(value)"
+    decode_expr = "decode_zigzag64(value.as_varint())"
     encode_func = "encode_sint64"
     wire_type = WireType.VARINT  # Uses wire type 0
 
@@ -1701,9 +1712,9 @@ def _generate_inline_encode_block(
 
     lines = []
     lines.append(f"auto &sub_msg = {element};")
-    lines.append(f"ProtoEncode::write_raw_byte(pos, {tag});")
+    lines.append(_encode_call("write_raw_byte", str(tag)))
     lines.append("uint8_t *len_pos = pos;")
-    lines.append("ProtoEncode::reserve_byte(pos);")
+    lines.append(_encode_call("reserve_byte"))
 
     # Generate inline field encoding for each sub-message field
     for field in sub_desc.field:
@@ -1774,18 +1785,11 @@ class FixedArrayRepeatedType(TypeInfo):
 
     def _encode_element(self, element: str) -> str:
         """Helper to generate encode statement for a single element."""
-        if isinstance(self._ti, EnumType):
-            return f"ProtoEncode::{self._ti.encode_func}(pos, {self.number}, static_cast<uint32_t>({element}), true);"
-        # Repeated message elements use encode_sub_message (force=true is default)
-        if isinstance(self._ti, MessageType):
-            if _is_inline_encode(self._ti.cpp_type):
-                return _generate_inline_encode_block(
-                    self.number, self._ti.cpp_type, element
-                )
-            return f"ProtoEncode::encode_sub_message(pos, buffer, {self.number}, {element});"
-        return (
-            f"ProtoEncode::{self._ti.encode_func}(pos, {self.number}, {element}, true);"
-        )
+        if isinstance(self._ti, MessageType) and _is_inline_encode(self._ti.cpp_type):
+            return _generate_inline_encode_block(
+                self.number, self._ti.cpp_type, element
+            )
+        return self._ti.encode_element(self.number, element)
 
     @property
     def cpp_type(self) -> str:
@@ -2079,55 +2083,23 @@ class RepeatedTypeInfo(TypeInfo):
         return self._ti.wire_type
 
     @property
-    def decode_varint_content(self) -> str:
-        # Pointer fields don't support decoding
-        if self._use_pointer:
-            return None
-        content = self._ti.decode_varint
-        if content is None:
-            return None
-        return (
-            f"case {self.number}: this->{self.field_name}.push_back({content}); break;"
-        )
+    def decode_expr(self) -> str | None:
+        return self._ti.decode_expr
+
+    def _decode_store(self, expr: str) -> str:
+        return f"this->{self.field_name}.push_back({expr});"
 
     @property
-    def decode_length_content(self) -> str:
+    def decode_content(self) -> str | None:
         # Pointer fields don't support decoding
         if self._use_pointer:
             return None
-        content = self._ti.decode_length
-        if content is None and isinstance(self._ti, MessageType):
-            # Special handling for non-template message decoding
-            return f"case {self.number}: this->{self.field_name}.emplace_back(); value.decode_to_message(this->{self.field_name}.back()); break;"
-        if content is None:
-            return None
-        return (
-            f"case {self.number}: this->{self.field_name}.push_back({content}); break;"
-        )
-
-    @property
-    def decode_32bit_content(self) -> str:
-        # Pointer fields don't support decoding
-        if self._use_pointer:
-            return None
-        content = self._ti.decode_32bit
-        if content is None:
-            return None
-        return (
-            f"case {self.number}: this->{self.field_name}.push_back({content}); break;"
-        )
-
-    @property
-    def decode_64bit_content(self) -> str:
-        # Pointer fields don't support decoding
-        if self._use_pointer:
-            return None
-        content = self._ti.decode_64bit
-        if content is None:
-            return None
-        return (
-            f"case {self.number}: this->{self.field_name}.push_back({content}); break;"
-        )
+        if isinstance(self._ti, MessageType):
+            return self.decode_case(
+                f"this->{self.field_name}.emplace_back();\n"
+                f"value.decode_to_message(this->{self.field_name}.back());"
+            )
+        return super().decode_content
 
     @property
     def _ti_is_bool(self) -> bool:
@@ -2135,15 +2107,7 @@ class RepeatedTypeInfo(TypeInfo):
         return isinstance(self._ti, BoolType)
 
     def _encode_element_call(self, element: str) -> str:
-        """Helper to generate encode call for a single element."""
-        if isinstance(self._ti, EnumType):
-            return f"ProtoEncode::{self._ti.encode_func}(pos, {self.number}, static_cast<uint32_t>({element}), true);"
-        # Repeated message elements use encode_sub_message (force=true is default)
-        if isinstance(self._ti, MessageType):
-            return f"ProtoEncode::encode_sub_message(pos, buffer, {self.number}, {element});"
-        return (
-            f"ProtoEncode::{self._ti.encode_func}(pos, {self.number}, {element}, true);"
-        )
+        return self._ti.encode_element(self.number, element)
 
     @property
     def encode_content(self) -> str:
@@ -2152,7 +2116,7 @@ class RepeatedTypeInfo(TypeInfo):
             # Special handling for const char* elements (when container_no_template contains "const char")
             if "const char" in self._container_no_template:
                 o = f"for (const char *it : *this->{self.field_name}) {{\n"
-                o += f"  ProtoEncode::{self._ti.encode_func}(pos, {self.number}, it, strlen(it), true);\n"
+                o += f"  {_encode_call(self._ti.encode_func, str(self.number), 'it', 'strlen(it)', force=True)}\n"
             else:
                 o = f"for (const auto &it : *this->{self.field_name}) {{\n"
                 o += f"  {self._encode_element_call('it')}\n"
@@ -2538,10 +2502,7 @@ def build_message_type(
 ) -> tuple[str, str, str]:
     public_content: list[str] = []
     protected_content: list[str] = []
-    decode_varint: list[str] = []
-    decode_length: list[str] = []
-    decode_32bit: list[str] = []
-    decode_64bit: list[str] = []
+    decode: list[str] = []
     encode: list[str] = []
     dump: list[str] = []
     size_calc: list[str] = []
@@ -2670,22 +2631,8 @@ def build_message_type(
             if field.options.HasExtension(pb.field_ifdef):
                 field_ifdef = field.options.Extensions[pb.field_ifdef]
 
-            if ti.decode_varint_content:
-                decode_varint.extend(
-                    wrap_with_ifdef(ti.decode_varint_content, field_ifdef)
-                )
-            if ti.decode_length_content:
-                decode_length.extend(
-                    wrap_with_ifdef(ti.decode_length_content, field_ifdef)
-                )
-            if ti.decode_32bit_content:
-                decode_32bit.extend(
-                    wrap_with_ifdef(ti.decode_32bit_content, field_ifdef)
-                )
-            if ti.decode_64bit_content:
-                decode_64bit.extend(
-                    wrap_with_ifdef(ti.decode_64bit_content, field_ifdef)
-                )
+            if case := ti.decode_content:
+                decode.extend(wrap_with_ifdef(case, field_ifdef))
         if ti.dump_content:
             # Check for field_ifdef option for dump as well
             field_ifdef = None
@@ -2695,49 +2642,15 @@ def build_message_type(
             dump.extend(wrap_with_ifdef(ti.dump_content, field_ifdef))
 
     cpp = ""
-    if decode_varint:
-        o = f"bool {desc.name}::decode_varint(uint32_t field_id, proto_varint_value_t value) {{\n"
-        o += "  switch (field_id) {\n"
-        o += indent("\n".join(decode_varint), "    ") + "\n"
-        o += "    default: return false;\n"
+    if decode:
+        o = f"void {desc.name}::decode_field(uint32_t tag, const uint8_t *data, proto_varint_value_t scalar) {{\n"
+        o += "  const ProtoFieldValue value(data, scalar);\n"
+        o += "  switch (tag) {\n"
+        o += indent("\n".join(decode), "    ") + "\n"
         o += "  }\n"
-        o += "  return true;\n"
         o += "}\n"
         cpp += o
-        prot = "bool decode_varint(uint32_t field_id, proto_varint_value_t value) override;"
-        protected_content.insert(0, prot)
-    if decode_length:
-        o = f"bool {desc.name}::decode_length(uint32_t field_id, ProtoLengthDelimited value) {{\n"
-        o += "  switch (field_id) {\n"
-        o += indent("\n".join(decode_length), "    ") + "\n"
-        o += "    default: return false;\n"
-        o += "  }\n"
-        o += "  return true;\n"
-        o += "}\n"
-        cpp += o
-        prot = "bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;"
-        protected_content.insert(0, prot)
-    if decode_32bit:
-        o = f"bool {desc.name}::decode_32bit(uint32_t field_id, Proto32Bit value) {{\n"
-        o += "  switch (field_id) {\n"
-        o += indent("\n".join(decode_32bit), "    ") + "\n"
-        o += "    default: return false;\n"
-        o += "  }\n"
-        o += "  return true;\n"
-        o += "}\n"
-        cpp += o
-        prot = "bool decode_32bit(uint32_t field_id, Proto32Bit value) override;"
-        protected_content.insert(0, prot)
-    if decode_64bit:
-        o = f"bool {desc.name}::decode_64bit(uint32_t field_id, Proto64Bit value) {{\n"
-        o += "  switch (field_id) {\n"
-        o += indent("\n".join(decode_64bit), "    ") + "\n"
-        o += "    default: return false;\n"
-        o += "  }\n"
-        o += "  return true;\n"
-        o += "}\n"
-        cpp += o
-        prot = "bool decode_64bit(uint32_t field_id, Proto64Bit value) override;"
+        prot = "void decode_field(uint32_t tag, const uint8_t *data, proto_varint_value_t scalar) override;"
         protected_content.insert(0, prot)
 
     # Generate custom decode() override for messages with FixedVector fields
@@ -2784,28 +2697,36 @@ def build_message_type(
             )
             for line in encode
         ]
-        o = f"{speed_attr}uint8_t *{desc.name}::encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) const {{\n"
+        o = f"{speed_attr}uint8_t *{desc.name}::encode_msg(const void *self, ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) {{\n"
+        o += f"  const auto &msg = *static_cast<const {desc.name} *>(self);\n"
         o += "  uint8_t *__restrict__ pos = buffer.get_pos();\n"
-        o += indent("\n".join(encode_debug)) + "\n"
+        o += indent("\n".join(encode_debug)).replace("this->", "msg.") + "\n"
         o += "  return pos;\n"
         o += "}\n"
         cpp += o
-        prot = (
-            "uint8_t *encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) const;"
+        public_content.append(
+            "static uint8_t *encode_msg(const void *self, ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM);"
+        )
+        public_content.append(
+            "uint8_t *encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) const {\n"
+            "  return encode_msg(this, buffer PROTO_ENCODE_DEBUG_ARG);\n"
+            "}"
         )
-        public_content.append(prot)
     # If no fields to encode or message doesn't need encoding, the default implementation in ProtoMessage will be used
 
     # Add calculate_size method only if this message needs encoding and has fields
     if needs_encode and size_calc and not is_inline_only:
-        o = f"{speed_attr}uint32_t {desc.name}::calculate_size() const {{\n"
+        o = f"{speed_attr}uint32_t {desc.name}::calc_size_msg(const void *self) {{\n"
+        o += f"  const auto &msg = *static_cast<const {desc.name} *>(self);\n"
         o += "  uint32_t size = 0;\n"
-        o += indent("\n".join(size_calc)) + "\n"
+        o += indent("\n".join(size_calc)).replace("this->", "msg.") + "\n"
         o += "  return size;\n"
         o += "}\n"
         cpp += o
-        prot = "uint32_t calculate_size() const;"
-        public_content.append(prot)
+        public_content.append("static uint32_t calc_size_msg(const void *self);")
+        public_content.append(
+            "uint32_t calculate_size() const { return calc_size_msg(this); }"
+        )
     # If no fields to calculate size for or message doesn't need encoding, the default implementation in ProtoMessage will be used
 
     # dump_to method declaration in header

script/determine-jobs.py

@@ -50,7 +50,6 @@ from __future__ import annotations
 
 import argparse
 from collections import Counter
-from collections.abc import Callable
 from enum import StrEnum
 from functools import cache
 import json
@@ -532,58 +531,37 @@ ESP32_PLATFORMIO_TRIGGER_PATH_PREFIXES = ("esphome/platformio/",)
 #   - esphome/build_gen/platformio.py -- the PlatformIO build generator
 #   - script/test_build_components.py -- the harness the job invokes
 #   - .github/workflows/ci.yml -- the job's own definition
-# Shared by every toolchain smoke-test job: the harness it invokes and the
-# workflow that defines it
-_SMOKE_HARNESS_TRIGGER_FILES = frozenset(
+ESP32_PLATFORMIO_TRIGGER_FILES = frozenset(
     {
+        "esphome/build_gen/platformio.py",
         "script/test_build_components.py",
         ".github/workflows/ci.yml",
     }
 )
 
-ESP32_PLATFORMIO_TRIGGER_FILES = _SMOKE_HARNESS_TRIGGER_FILES | {
-    "esphome/build_gen/platformio.py",
-    # The pch machinery the strict smoke job polices, and the modules it
-    # imports; the rest of build_helpers/ does not affect PlatformIO builds
-    "esphome/build_helpers/pch.py",
-    "esphome/build_helpers/ccache.py",
-    "esphome/build_helpers/idedata.py",
-}
-
-
-def _path_or_file_trigger(
-    files: list[str],
-    trigger_files: frozenset[str],
-    trigger_prefixes: tuple[str, ...],
-) -> bool:
-    """Whether any changed file matches the given infrastructure triggers."""
-    return any(
-        file in trigger_files or file.startswith(trigger_prefixes) for file in files
-    )
-
-
-@cache
-def _cached_components_closure(files: tuple[str, ...]) -> frozenset[str]:
-    """Dependency closure of the changed components, from the changed files.
-
-    The walk is expensive and every toolchain smoke-test job asks for the
-    same file list, so compute it once per run."""
-    component_files = [f for f in files if filter_component_and_test_files(f)]
-    return frozenset(get_components_with_dependencies(component_files, True))
-
 
 def _esp32_platformio_path_or_file_trigger(files: list[str]) -> bool:
     """Whether any changed file is a PlatformIO infrastructure / harness trigger."""
-    return _path_or_file_trigger(
-        files, ESP32_PLATFORMIO_TRIGGER_FILES, ESP32_PLATFORMIO_TRIGGER_PATH_PREFIXES
-    )
+    for file in files:
+        if file in ESP32_PLATFORMIO_TRIGGER_FILES:
+            return True
+        if any(
+            file.startswith(prefix) for prefix in ESP32_PLATFORMIO_TRIGGER_PATH_PREFIXES
+        ):
+            return True
+    return False
 
 
 def _esp_idf_infra_changed(files: list[str]) -> bool:
     """Whether any changed file is ESP-IDF build/runner infrastructure."""
-    return _path_or_file_trigger(
-        files, ESP_IDF_INFRA_TRIGGER_FILES, ESP_IDF_INFRA_TRIGGER_PATH_PREFIXES
-    )
+    for file in files:
+        if file in ESP_IDF_INFRA_TRIGGER_FILES:
+            return True
+        if any(
+            file.startswith(prefix) for prefix in ESP_IDF_INFRA_TRIGGER_PATH_PREFIXES
+        ):
+            return True
+    return False
 
 
 def esp32_platformio_components_to_test(branch: str | None = None) -> list[str]:
@@ -621,23 +599,15 @@ def esp32_platformio_components_to_test(branch: str | None = None) -> list[str]:
     Returns:
         Sorted list of component names to compile.
     """
-    return _toolchain_components_to_test(
-        branch, ESP32_PLATFORMIO_TEST_COMPONENTS, _esp32_platformio_path_or_file_trigger
-    )
-
-
-def _toolchain_components_to_test(
-    branch: str | None,
-    test_set: frozenset[str],
-    infra_trigger: Callable[[list[str]], bool],
-) -> list[str]:
-    """The shared narrowing rule for the per-toolchain smoke-test jobs."""
     files = changed_files(branch)
 
-    if core_changed(files) or infra_trigger(files):
-        return sorted(test_set)
+    if core_changed(files) or _esp32_platformio_path_or_file_trigger(files):
+        return sorted(ESP32_PLATFORMIO_TEST_COMPONENTS)
 
-    return sorted(test_set & _cached_components_closure(tuple(files)))
+    component_files = [f for f in files if filter_component_and_test_files(f)]
+    changed = get_components_with_dependencies(component_files, True)
+
+    return sorted(ESP32_PLATFORMIO_TEST_COMPONENTS & set(changed))
 
 
 def should_run_esp32_platformio(branch: str | None = None) -> bool:
@@ -658,83 +628,6 @@ def should_run_esp32_platformio(branch: str | None = None) -> bool:
     return bool(esp32_platformio_components_to_test(branch))
 
 
-# The `--toolchain arduino` smoke-test set: covers the core, the bundled and
-# converted registry libraries, and the waveform path.
-ESP8266_NATIVE_TEST_COMPONENTS = frozenset(
-    {
-        "esp8266",
-        "api",
-        "web_server",
-        "captive_portal",
-        "mqtt",
-        "esp8266_pwm",
-        "neopixelbus",
-        "bme280_i2c",
-        "uart",
-    }
-)
-
-# Infrastructure whose changes always trigger the native ESP8266 compile
-# test. esphome/build_helpers/ holds the idedata and size-summary helpers
-# the backend shares with the native ESP-IDF build.
-ESP8266_NATIVE_TRIGGER_PATH_PREFIXES = (
-    "esphome/arduino8266/",
-    "esphome/arduino/",
-    "esphome/build_helpers/",
-)
-# Shared library-conversion modules every native build imports; espidf-only
-# infra (build_gen/espidf.py) deliberately stays out of the esp8266 set.
-_NATIVE_SHARED_TRIGGER_FILES = frozenset(
-    {
-        "esphome/framework_helpers.py",
-        "esphome/platformio/library.py",
-        "esphome/platformio/extra_script.py",
-    }
-)
-# Tripwire: the shared modules must stay in the ESP-IDF trigger set too
-# (now defined in clang_tidy_hash), or its smoke test silently skips them
-assert _NATIVE_SHARED_TRIGGER_FILES <= ESP_IDF_INFRA_TRIGGER_FILES
-ESP8266_NATIVE_TRIGGER_FILES = (
-    _NATIVE_SHARED_TRIGGER_FILES
-    | _SMOKE_HARNESS_TRIGGER_FILES
-    | {
-        "esphome/build_gen/arduino8266.py",
-        "esphome/build_gen/build_tool.py",
-        "esphome/components/esp8266/build_surgery.py",
-        "esphome/components/esp8266/boards.py",
-        "esphome/platformio/registry.py",
-        # esp8266/__init__.py imports copy_ccache_script from it
-        "esphome/platformio/toolchain.py",
-        ".github/actions/cache-arduino8266/action.yml",
-    }
-)
-
-
-def _esp8266_native_path_or_file_trigger(files: list[str]) -> bool:
-    """Whether any changed file is native-ESP8266 infrastructure / harness."""
-    # base_python_changed covers the top-level esphome/*.py modules the
-    # native backend imports directly (framework_helpers, helpers, writer,
-    # __main__); without it a change there would silently skip this job.
-    # base_python_changed is deliberately broad (any top-level esphome/*.py)
-    # as belt-and-braces while the backend is new; narrow it to the modules
-    # the backend imports once the toolchain has soaked a few releases
-    return base_python_changed(files) or _path_or_file_trigger(
-        files, ESP8266_NATIVE_TRIGGER_FILES, ESP8266_NATIVE_TRIGGER_PATH_PREFIXES
-    )
-
-
-def esp8266_native_components_to_test(branch: str | None = None) -> list[str]:
-    """Subset of ``ESP8266_NATIVE_TEST_COMPONENTS`` the job needs to compile.
-
-    Same narrowing logic as ``esp32_platformio_components_to_test``: the full
-    list on core or infrastructure changes, otherwise the intersection with
-    the changed-component dependency closure (empty list skips the job).
-    """
-    return _toolchain_components_to_test(
-        branch, ESP8266_NATIVE_TEST_COMPONENTS, _esp8266_native_path_or_file_trigger
-    )
-
-
 def determine_cpp_unit_tests(
     branch: str | None = None,
 ) -> tuple[bool, list[str]]:
@@ -1333,8 +1226,6 @@ def main() -> None:
         run_device_builder = True
         esp32_platformio_components = sorted(ESP32_PLATFORMIO_TEST_COMPONENTS)
         run_esp32_platformio = True
-        esp8266_native_components = sorted(ESP8266_NATIVE_TEST_COMPONENTS)
-        run_esp8266_native = True
     else:
         integration_run_all, integration_test_files = determine_integration_tests(
             args.branch
@@ -1346,8 +1237,6 @@ def main() -> None:
         run_device_builder = should_run_device_builder(args.branch)
         esp32_platformio_components = esp32_platformio_components_to_test(args.branch)
         run_esp32_platformio = bool(esp32_platformio_components)
-        esp8266_native_components = esp8266_native_components_to_test(args.branch)
-        run_esp8266_native = bool(esp8266_native_components)
     run_integration, integration_test_buckets = _compute_integration_test_buckets(
         integration_run_all, integration_test_files
     )
@@ -1543,8 +1432,6 @@ def main() -> None:
         "device_builder": run_device_builder,
         "esp32_platformio": run_esp32_platformio,
         "esp32_platformio_components": ",".join(esp32_platformio_components),
-        "esp8266_native": run_esp8266_native,
-        "esp8266_native_components": ",".join(esp8266_native_components),
         "changed_components": changed_components,
         "changed_components_with_tests": changed_components_with_tests,
         "directly_changed_components_with_tests": list(directly_changed_with_tests),

script/git-hooks/post-checkout

@@ -14,31 +14,7 @@ top=$(git rev-parse --show-toplevel 2>/dev/null) || exit 0
 [ -x "$top/venv/bin/python" ] && exit 0
 [ -x "$top/script/setup" ] || exit 0
 
-# Every worktree shares the hooks directory of the checkout it was created
-# from, and the script/setup run below is the one from whichever branch was just
-# checked out. Older branches install their own pre-commit hook without checking
-# for a worktree: that moves the shared hook aside as pre-commit.legacy and
-# replaces it with one tied to this worktree's virtual environment, so commits
-# break in every checkout. To rule that out, the hooks directory is copied
-# before script/setup runs and put back exactly as it was afterwards, including
-# removing any file script/setup added.
-hooks=$(git rev-parse --path-format=absolute --git-path hooks 2>/dev/null) || exit 0
-snap=$(mktemp -d "$hooks/.post-checkout.XXXXXX") || exit 0
-cp -p "$hooks"/* "$snap"/ 2>/dev/null
-
 # Clear VIRTUAL_ENV so a checkout made from a shell with an environment already
 # activated still gets its own, rather than having the active one repointed at
 # this working tree.
-env -u VIRTUAL_ENV "$top/script/setup"
-status=$?
-
-for f in "$hooks"/*; do
-  [ -e "$snap/${f##*/}" ] || rm -f "$f"
-done
-# Files are moved rather than copied so a hook that is still running, such as
-# this one, is swapped out atomically instead of being rewritten in place.
-for f in "$snap"/*; do
-  cmp -s "$f" "$hooks/${f##*/}" 2>/dev/null || mv -f "$f" "$hooks/${f##*/}"
-done
-rm -rf "$snap"
-exit $status
+exec env -u VIRTUAL_ENV "$top/script/setup"

script/sync_dependency_versions.py

@@ -1,164 +0,0 @@
-#!/usr/bin/env python3
-"""Keep pre-commit hook revs in sync with the requirements files.
-
-Dependabot only bumps the ``package==version`` pins in ``requirements*.txt``.
-Some of those tools are pinned a second time as hook ``rev`` values in
-``.pre-commit-config.yaml``. This script treats the requirements files as
-the source of truth and rewrites the revs to match, editing the config
-through yamlrocks so comments and layout survive.
-
-Run without arguments to apply the changes in place, or with ``--check`` to
-only report drift (exit status 1 when anything is out of sync).
-"""
-
-from __future__ import annotations
-
-import argparse
-from dataclasses import dataclass
-from pathlib import Path
-import re
-import sys
-from typing import Any
-
-import yamlrocks
-
-REPO_ROOT = Path(__file__).resolve().parent.parent
-PRECOMMIT_CONFIG = ".pre-commit-config.yaml"
-
-
-class SyncError(Exception):
-    """A pin could not be located in a requirements file or the config."""
-
-
-@dataclass(frozen=True)
-class SyncTarget:
-    """A requirements pin and the pre-commit repo whose rev mirrors it."""
-
-    package: str
-    requirements_file: str
-    repo: str
-
-
-SYNC_TARGETS: tuple[SyncTarget, ...] = (
-    SyncTarget(
-        "ruff", "requirements_test.txt", "https://github.com/astral-sh/ruff-pre-commit"
-    ),
-    SyncTarget("flake8", "requirements_test.txt", "https://github.com/PyCQA/flake8"),
-    SyncTarget(
-        "pyupgrade", "requirements_test.txt", "https://github.com/asottile/pyupgrade"
-    ),
-    SyncTarget(
-        "clang-format",
-        "requirements_dev.txt",
-        "https://github.com/pre-commit/mirrors-clang-format",
-    ),
-    SyncTarget(
-        "yamllint",
-        "requirements_dev.txt",
-        "https://github.com/adrienverge/yamllint.git",
-    ),
-)
-
-
-def read_requirement_version(requirements: str, package: str) -> str | None:
-    """Return the ``==`` pin for ``package`` or None when it is not pinned."""
-    pattern = re.compile(
-        rf"^{re.escape(package)}==(?P<version>[^\s#]+)",
-        re.MULTILINE | re.IGNORECASE,
-    )
-    match = pattern.search(requirements)
-    return match.group("version") if match else None
-
-
-def find_repo_entry(doc: Any, repo: str) -> Any:
-    """Return the single ``- repo:`` block for ``repo`` in a pre-commit doc."""
-    try:
-        entries = [entry for entry in doc["repos"] if entry["repo"] == repo]
-    except KeyError as err:
-        raise SyncError(f"malformed pre-commit config, missing key {err}") from None
-    if len(entries) != 1:
-        raise SyncError(
-            f"expected exactly one block for repo {repo}, found {len(entries)}"
-        )
-    return entries[0]
-
-
-def current_rev(entry: Any, repo: str) -> tuple[str, str]:
-    """Split the block's rev into its tag prefix (``v`` or empty) and version."""
-    if "rev" not in entry:
-        raise SyncError(f"repo {repo} has no rev")
-    rev = entry["rev"]
-    if not isinstance(rev, str):
-        # A rev such as ``1.0`` parses as a number and cannot be compared or
-        # rewritten safely; quote it in the config instead.
-        raise SyncError(f"rev of repo {repo} is not a string: {rev!r}")
-    prefix = "v" if rev.startswith("v") else ""
-    return prefix, rev.removeprefix("v")
-
-
-def sync(root: Path, *, write: bool) -> list[str]:
-    """Bring every hook rev in line with its requirements pin.
-
-    Returns one description per rev that was (or, when ``write`` is False,
-    would be) changed. Raises SyncError when a pin cannot be found, which
-    means SYNC_TARGETS has gone stale and needs updating by hand.
-    """
-    config_path = root / PRECOMMIT_CONFIG
-    doc = yamlrocks.loads(config_path.read_bytes(), option=yamlrocks.OPT_ROUND_TRIP)
-    requirements: dict[str, str] = {}
-    changes: list[str] = []
-    for target in SYNC_TARGETS:
-        if target.requirements_file not in requirements:
-            requirements[target.requirements_file] = (
-                root / target.requirements_file
-            ).read_text()
-        version = read_requirement_version(
-            requirements[target.requirements_file], target.package
-        )
-        if version is None:
-            raise SyncError(
-                f"{target.requirements_file}: no '{target.package}==' pin found"
-            )
-
-        entry = find_repo_entry(doc, target.repo)
-        prefix, current = current_rev(entry, target.repo)
-        if current == version:
-            continue
-        changes.append(f"{target.package}: {current} -> {version}")
-        entry["rev"] = f"{prefix}{version}"
-
-    if changes and write:
-        config_path.write_bytes(doc.to_yaml())
-    return changes
-
-
-def main(argv: list[str] | None = None) -> int:
-    parser = argparse.ArgumentParser(description=__doc__.splitlines()[0])
-    parser.add_argument(
-        "--check",
-        action="store_true",
-        help="report drift without modifying any file; exit 1 if out of sync",
-    )
-    parser.add_argument(
-        "--root",
-        type=Path,
-        default=REPO_ROOT,
-        help="repository checkout to operate on (default: this checkout)",
-    )
-    args = parser.parse_args(argv)
-
-    try:
-        changes = sync(args.root, write=not args.check)
-    except SyncError as err:
-        print(f"error: {err}", file=sys.stderr)
-        return 1
-
-    for change in changes:
-        print(change)
-    if args.check and changes:
-        return 1
-    return 0
-
-
-if __name__ == "__main__":  # pragma: no cover
-    sys.exit(main())

script/test_build_components.py

@@ -1027,7 +1027,6 @@ def test_components(
     isolated_components: set[str] | None = None,
     base_only: bool = False,
     toolchain: str | None = None,
-    fail_on_no_tests: bool = False,
 ) -> int:
     """Test components with optional intelligent grouping.
 
@@ -1062,34 +1061,20 @@ def test_components(
     # toolchain build.
     include_validate = esphome_command != "compile"
 
-    # Find all component tests; remember which components each pattern
-    # (wildcards included) matched, for the deferred no-tests accounting
+    # Find all component tests
     all_tests = {}
-    pattern_components: dict[str, set[str]] = {}
     for pattern in component_patterns:
         # Skip empty patterns (happens when components list is empty string)
         if not pattern:
             continue
-        found = find_component_tests(
-            tests_dir, pattern, base_only, include_validate=include_validate
+        all_tests.update(
+            find_component_tests(
+                tests_dir, pattern, base_only, include_validate=include_validate
+            )
         )
-        pattern_components[pattern] = set(found)
-        all_tests.update(found)
-
-    # The flag's contract is "no test matched fails": a fully blank pattern
-    # list would otherwise slide into the reference-baseline fallback and
-    # exit green while building nothing a caller asked for
-    if fail_on_no_tests and not any(component_patterns):
-        print("No components requested (blank component list)")
-        return 1
-
-    if fail_on_no_tests and not all_tests:
-        # Nothing matched at all: fail before the synthetic baseline build,
-        # which would spend a compile reporting success on nothing. Partial
-        # matches defer to the per-pattern accounting after the summary.
-        print(f"No components found matching: {component_patterns}")
-        return 1
 
+    # If no components found, build a reference configuration for baseline comparison
+    # Create a synthetic "empty" component test that will build just the base config
     if not all_tests:
         print(f"No components found matching: {component_patterns}")
         print(
@@ -1193,26 +1178,6 @@ def test_components(
                         toolchain=toolchain,
                     )
 
-    silent: list[str] = []
-    if fail_on_no_tests:
-        # A green run that built nothing for a requested pattern (renamed
-        # fixture, missing base file, version-suffix mismatch, a wildcard
-        # matching no component) must not pass CI. Per pattern: an
-        # all-or-nothing check would let one silent pattern hide behind the
-        # others. Opt-in: some legs (the esp32-ard smoke subset)
-        # legitimately match nothing. Failing is deferred past the summary
-        # so a real failure's reproduce commands still print.
-        built = {c for r in test_results for c in r.components}
-        # A pattern is silent when it matched no fixture, or when none of
-        # its matched components produced a build (wildcards included)
-        silent = [
-            p
-            for p in component_patterns
-            if p and not (pattern_components.get(p, set()) & built)
-        ]
-        if silent:
-            print(f"No tests ran for requested pattern(s): {', '.join(silent)}")
-
     # Separate results into passed and failed
     passed_results = [r for r in test_results if r.success]
     failed_results = [r for r in test_results if not r.success]
@@ -1244,7 +1209,7 @@ def test_components(
     if os.environ.get("GITHUB_STEP_SUMMARY"):
         write_github_summary(test_results, toolchain=toolchain)
 
-    if failed_results or silent:
+    if failed_results:
         return 1
 
     return 0
@@ -1299,12 +1264,6 @@ def main() -> int:
         "--toolchain",
         help="Select toolchain for compiling.",
     )
-    parser.add_argument(
-        "--fail-on-no-tests",
-        action="store_true",
-        help="Exit non-zero when no test matched (for CI legs whose "
-        "components must all have fixtures)",
-    )
 
     args = parser.parse_args()
 
@@ -1323,7 +1282,6 @@ def main() -> int:
         continue_on_fail=args.continue_on_fail,
         enable_grouping=not args.no_grouping,
         isolated_components=isolated_components,
-        fail_on_no_tests=args.fail_on_no_tests,
         base_only=args.base_only,
         toolchain=args.toolchain,
     )

tests/benchmarks/components/api/bench_proto_proxy.cpp

@@ -249,7 +249,7 @@ static APIBuffer build_infrared_rf_transmit_wire() {
   std::memcpy(bytes + len, packed, packed_len);
   len += packed_len;
   // field 6: modulation = 1 (non-zero so it's actually emitted and exercises
-  // decode_varint for this field, matching the documented layout above).
+  // decode_field for this field, matching the documented layout above).
   put_byte(0x30);
   put_varint(1);
 

tests/component_tests/lvgl/config/keyboard_no_label.yaml

@@ -1,32 +0,0 @@
-esphome:
-  name: test-keyboard-no-label
-
-esp32:
-  board: esp32dev
-  framework:
-    type: esp-idf
-
-spi:
-  - id: spi_bus
-    clk_pin: GPIO18
-    mosi_pin: GPIO23
-
-display:
-  - platform: mipi_spi
-    spi_id: spi_bus
-    model: st7789v
-    id: tft_display
-    dimensions:
-      width: 240
-      height: 320
-    cs_pin: GPIO22
-    dc_pin: GPIO21
-    auto_clear_enabled: false
-    invert_colors: false
-    update_interval: never
-
-lvgl:
-  displays: tft_display
-  widgets:
-    - keyboard:
-        id: keyboard_widget

tests/component_tests/lvgl/config/qrcode_no_label.yaml

@@ -1,34 +0,0 @@
-esphome:
-  name: test-qrcode-no-label
-
-esp32:
-  board: esp32dev
-  framework:
-    type: esp-idf
-
-spi:
-  - id: spi_bus
-    clk_pin: GPIO18
-    mosi_pin: GPIO23
-
-display:
-  - platform: mipi_spi
-    spi_id: spi_bus
-    model: st7789v
-    id: tft_display
-    dimensions:
-      width: 240
-      height: 320
-    cs_pin: GPIO22
-    dc_pin: GPIO21
-    auto_clear_enabled: false
-    invert_colors: false
-    update_interval: never
-
-lvgl:
-  displays: tft_display
-  widgets:
-    - qrcode:
-        id: qr_widget
-        size: 100
-        text: "esphome.io"

tests/component_tests/lvgl/config/tabview_no_label.yaml

@@ -1,35 +0,0 @@
-esphome:
-  name: test-tabview-no-label
-
-esp32:
-  board: esp32dev
-  framework:
-    type: esp-idf
-
-spi:
-  - id: spi_bus
-    clk_pin: GPIO18
-    mosi_pin: GPIO23
-
-display:
-  - platform: mipi_spi
-    spi_id: spi_bus
-    model: st7789v
-    id: tft_display
-    dimensions:
-      width: 240
-      height: 320
-    cs_pin: GPIO22
-    dc_pin: GPIO21
-    auto_clear_enabled: false
-    invert_colors: false
-    update_interval: never
-
-lvgl:
-  displays: tft_display
-  widgets:
-    - tabview:
-        id: tabview_widget
-        tabs:
-          - name: "Tab 1"
-            id: tab_1

tests/component_tests/lvgl/test_widget_label_dependency.py

@@ -1,32 +0,0 @@
-"""Widgets whose LVGL C implementation creates or references labels
-internally (tab titles, key legends, the QR canvas fallback) must declare
-the label dependency in ``get_uses()``. Otherwise a config that contains
-no ``label`` widget of its own compiles LVGL without ``LV_USE_LABEL`` and
-fails at C compile time with undefined ``lv_label_*`` symbols.
-"""
-
-from __future__ import annotations
-
-from collections.abc import Callable
-from pathlib import Path
-
-import pytest
-
-from esphome.components.lvgl import defines as df
-
-
-@pytest.mark.parametrize(
-    "yaml_file",
-    [
-        "qrcode_no_label.yaml",
-        "keyboard_no_label.yaml",
-        "tabview_no_label.yaml",
-    ],
-)
-def test_label_less_config_enables_lv_use_label(
-    generate_main: Callable[[str | Path], str],
-    component_config_path: Callable[[str], Path],
-    yaml_file: str,
-) -> None:
-    generate_main(component_config_path(yaml_file))
-    assert "LV_USE_LABEL" in df.get_defines()

tests/components/api/test_proto_mac_varint.cpp

@@ -59,7 +59,7 @@ static void verify_mac(uint64_t mac, size_t expected_bytes) {
 #ifdef ESPHOME_DEBUG_API
   uint8_t *proto_debug_end_ = api_buf.data() + api_buf.size();
 #endif
-  ProtoEncode::encode_varint_raw_48bit(pos PROTO_ENCODE_DEBUG_ARG, mac);
+  pos = ProtoEncode::encode_varint_raw_48bit(pos PROTO_ENCODE_DEBUG_ARG, mac);
   size_t new_len = pos - api_buf.data();
 
   EXPECT_EQ(new_len, expected_bytes) << "mac=0x" << std::hex << mac << std::dec;

tests/components/atm90e32/__init__.py

@@ -1,5 +0,0 @@
-from tests.testing_helpers import ComponentManifestOverride
-
-
-def override_manifest(manifest: ComponentManifestOverride) -> None:
-    manifest.dependencies = manifest.dependencies + ["sensor", "spi"]

tests/components/atm90e32/offset_register_verification_test.cpp

@@ -1,62 +0,0 @@
-#include <gtest/gtest.h>
-
-#include "esphome/components/atm90e32/atm90e32.h"
-
-namespace esphome::atm90e32::testing {
-
-TEST(ATM90E32OffsetRegisterVerification, AcceptsExactSignedReadback) {
-  EXPECT_TRUE(offset_register_value_matches(0x007B, 123));
-  EXPECT_TRUE(offset_register_value_matches(0xFF85, -123));
-}
-
-TEST(ATM90E32OffsetRegisterVerification, RejectsMismatchedReadback) {
-  EXPECT_FALSE(offset_register_value_matches(0x007C, 123));
-  EXPECT_FALSE(offset_register_value_matches(0xFF84, -123));
-}
-
-TEST(ATM90E32OffsetRestoreState, ReportsVerifiedStoredValuesAsRestored) {
-  const auto state = resolve_offset_restore_state(true, true, false);
-
-  EXPECT_TRUE(state.restored);
-  EXPECT_TRUE(state.values_verified);
-}
-
-TEST(ATM90E32OffsetRestoreState, ReportsVerifiedConfigFallbackAsNotRestored) {
-  const auto state = resolve_offset_restore_state(true, false, true);
-
-  EXPECT_FALSE(state.restored);
-  EXPECT_TRUE(state.values_verified);
-}
-
-TEST(ATM90E32OffsetRestoreState, ReportsFailedConfigFallbackAsUnverified) {
-  const auto state = resolve_offset_restore_state(true, false, false);
-
-  EXPECT_FALSE(state.restored);
-  EXPECT_FALSE(state.values_verified);
-}
-
-TEST(ATM90E32OffsetRestoreState, ReportsConfigWithoutStoredValuesAsNotRestored) {
-  const auto state = resolve_offset_restore_state(false, true, false);
-
-  EXPECT_FALSE(state.restored);
-  EXPECT_TRUE(state.values_verified);
-}
-
-TEST(ATM90E32OffsetPersistence, RollsBackStoredValuesOrZeroSentinel) {
-  const OffsetCalibration previous[3]{{1, -1}, {2, -2}, {3, -3}};
-  OffsetCalibration rollback[3]{};
-
-  prepare_offset_rollback(previous, true, rollback);
-  for (uint8_t phase = 0; phase < 3; phase++) {
-    EXPECT_EQ(rollback[phase].first_offset, previous[phase].first_offset);
-    EXPECT_EQ(rollback[phase].second_offset, previous[phase].second_offset);
-  }
-
-  prepare_offset_rollback(previous, false, rollback);
-  for (const auto &phase : rollback) {
-    EXPECT_EQ(phase.first_offset, 0);
-    EXPECT_EQ(phase.second_offset, 0);
-  }
-}
-
-}  // namespace esphome::atm90e32::testing

tests/components/tuya/test-no-network.bk72xx-ard.yaml

@@ -1,29 +0,0 @@
-# Tuya without any network component (no wifi/ethernet/api), as used on
-# serial-only or BLE-only Tuya MCU boards. Regression test for
-# https://github.com/esphome/esphome/issues/18942
-substitutions:
-  status_pin: P6
-
-packages:
-  uart: !include ../../test_build_components/common/uart/bk72xx-ard.yaml
-
-tuya:
-  status_pin: ${status_pin}
-
-binary_sensor:
-  - platform: tuya
-    id: tuya_presence
-    sensor_datapoint: 101
-
-sensor:
-  - platform: tuya
-    id: tuya_light_intensity
-    sensor_datapoint: 103
-
-number:
-  - platform: tuya
-    id: tuya_far_detection
-    number_datapoint: 109
-    min_value: 0
-    max_value: 600
-    step: 1

tests/integration/fixtures/api_decode_wire_types.yaml

@@ -0,0 +1,43 @@
+esphome:
+  name: api-decode-wire-types-test
+host:
+api:
+logger:
+  level: DEBUG
+
+switch:
+  - platform: template
+    name: "Wire Switch"
+    optimistic: true
+
+output:
+  - platform: template
+    id: wire_dim
+    type: float
+    write_action:
+      - lambda: ""
+
+light:
+  - platform: monochromatic
+    name: "Wire Light"
+    output: wire_dim
+    default_transition_length: 0s
+    effects:
+      - pulse:
+          name: Pulse
+
+text:
+  - platform: template
+    name: "Wire Text"
+    optimistic: true
+    mode: text
+    min_length: 0
+    max_length: 255
+
+number:
+  - platform: template
+    name: "Wire Number"
+    optimistic: true
+    min_value: -1000
+    max_value: 1000
+    step: 0.5

tests/integration/fixtures/api_empty_message_roundtrip.yaml

@@ -0,0 +1,11 @@
+esphome:
+  name: api-empty-message-test
+host:
+api:
+logger:
+  level: DEBUG
+
+switch:
+  - platform: template
+    name: "Empty Message Switch"
+    optimistic: true

tests/integration/fixtures/api_encode_boundaries.yaml

@@ -0,0 +1,58 @@
+esphome:
+  name: api-encode-boundaries-test
+  # Top-level area fills DeviceInfoResponse.suggested_area (field 16, a two-byte tag)
+  area:
+    id: kitchen_area
+    name: Kitchen
+  on_boot:
+    - sensor.template.publish:
+        id: zero_then_value
+        state: 0.0
+
+host:
+api:
+logger:
+  level: DEBUG
+
+sensor:
+  - platform: template
+    name: "Zero Then Value"
+    id: zero_then_value
+    # Negative int32 takes the ten byte varint path
+    accuracy_decimals: -2
+    update_interval: never
+
+text_sensor:
+  - platform: template
+    name: "Long Text"
+    id: long_text
+    update_interval: never
+
+number:
+  - platform: template
+    name: "Negative Number"
+    optimistic: true
+    min_value: -1000
+    max_value: 1000
+    step: 0.5
+    initial_value: -123.5
+
+select:
+  - platform: template
+    name: "Long Option Select"
+    optimistic: true
+    options:
+      - short
+      - "option-with-a-name-long-enough-that-its-length-prefix-needs-two-varint-bytes-when-the-list-entities-response-is-encoded-xxxxxxxxxx"
+    initial_option: short
+
+button:
+  - platform: template
+    name: "Publish Values"
+    on_press:
+      - sensor.template.publish:
+          id: zero_then_value
+          state: 12.5
+      - text_sensor.template.publish:
+          id: long_text
+          state: !lambda return std::string(200, 'y');

tests/integration/raw_api_client.py

@@ -125,11 +125,12 @@ class RawApiClient:
         await self.read_until_frame(MESSAGE_TYPE_OF[api_pb2.HelloResponse])
 
     async def send_message(self, msg: message.Message) -> None:
+        await self.send_raw(MESSAGE_TYPE_OF[type(msg)], msg.SerializeToString())
+
+    async def send_raw(self, msg_type: int, payload: bytes) -> None:
+        """Send a frame with a hand built payload, for shapes protobuf will not serialize."""
         loop = asyncio.get_running_loop()
-        await loop.sock_sendall(
-            self._sock,
-            encode_frame(MESSAGE_TYPE_OF[type(msg)], msg.SerializeToString()),
-        )
+        await loop.sock_sendall(self._sock, encode_frame(msg_type, payload))
 
     async def read_until_frame(self, msg_type: int, timeout: float = 10.0) -> None:
         """Read until at least one frame of msg_type has been received."""

tests/integration/state_utils.py

@@ -57,6 +57,46 @@ async def wait_for_state(
     return await asyncio.wait_for(future, timeout=timeout)
 
 
+class StateWaiter:
+    """Route one state subscription to any number of predicate waits."""
+
+    def __init__(self) -> None:
+        self._waiters: list[
+            tuple[Callable[[EntityState], bool], asyncio.Future[EntityState]]
+        ] = []
+
+    def on_state(self, state: EntityState) -> None:
+        for predicate, future in self._waiters:
+            if future.done():
+                continue
+            try:
+                matched = predicate(state)
+            except Exception as exc:  # noqa: BLE001  the wait re-raises it, the callback must not die
+                future.set_exception(exc)
+                continue
+            if matched:
+                future.set_result(state)
+
+    async def expect(
+        self,
+        predicate: Callable[[EntityState], bool],
+        timeout: float = 5.0,
+        label: str | None = None,
+    ) -> EntityState:
+        """Wait for the next state matching ``predicate``; states seen before this call do not count."""
+        entry = (predicate, asyncio.get_running_loop().create_future())
+        self._waiters.append(entry)
+        try:
+            async with asyncio.timeout(timeout):
+                return await entry[1]
+        except TimeoutError:
+            raise TimeoutError(
+                f"no state matched {label or predicate} within {timeout}s"
+            ) from None
+        finally:
+            self._waiters.remove(entry)
+
+
 def find_entity[T: EntityInfo](
     entities: list[EntityInfo],
     object_id_substring: str,

tests/integration/test_api_decode_wire_types.py

@@ -0,0 +1,142 @@
+"""decode_field() must take fields that match their declared wire type, drop the ones that do
+not, skip unknown fields, and handle two byte tags, varints and length prefixes."""
+
+from __future__ import annotations
+
+from collections.abc import Callable
+import struct
+
+from aioesphomeapi import (
+    EntityState,
+    LightState,
+    NumberState,
+    SwitchState,
+    TextState,
+    api_pb2,
+)
+import pytest
+
+from .raw_api_client import MESSAGE_TYPE_OF, RawApiClient, encode_varint
+from .state_utils import InitialStateHelper, StateWaiter, require_entity
+from .types import APIClientConnectedFactory, RunCompiledFunction
+
+SWITCH_COMMAND = MESSAGE_TYPE_OF[api_pb2.SwitchCommandRequest]
+WIRE_VARINT, WIRE_LENGTH, WIRE_FIXED32 = 0, 2, 5
+
+
+def tag(field: int, wire_type: int) -> bytes:
+    return encode_varint((field << 3) | wire_type)
+
+
+@pytest.mark.asyncio
+async def test_api_decode_wire_types(
+    yaml_config: str,
+    run_compiled: RunCompiledFunction,
+    api_client_connected: APIClientConnectedFactory,
+    unused_tcp_port: int,
+) -> None:
+    async with (
+        run_compiled(yaml_config),
+        api_client_connected() as client,
+        RawApiClient(unused_tcp_port) as raw,
+    ):
+        entities, _ = await client.list_entities_services()
+        switch = require_entity(entities, "wire_switch")
+        light = require_entity(entities, "wire_light")
+        text = require_entity(entities, "wire_text")
+        number = require_entity(entities, "wire_number")
+        key = tag(1, WIRE_FIXED32) + struct.pack("<I", switch.key)
+        on, off = tag(2, WIRE_VARINT) + b"\x01", tag(2, WIRE_VARINT) + b"\x00"
+
+        switch_states: list[bool] = []
+        waiter = StateWaiter()
+
+        def on_state(state: EntityState) -> None:
+            if isinstance(state, SwitchState) and state.key == switch.key:
+                switch_states.append(state.state)
+            waiter.on_state(state)
+
+        def switch_is(value: bool) -> Callable[[EntityState], bool]:
+            return lambda s: (
+                isinstance(s, SwitchState) and s.key == switch.key and s.state is value
+            )
+
+        def number_is(value: float) -> Callable[[EntityState], bool]:
+            return lambda s: (
+                isinstance(s, NumberState) and s.key == number.key and s.state == value
+            )
+
+        initial = InitialStateHelper(entities)
+        client.subscribe_states(initial.on_state_wrapper(on_state))
+        await initial.wait_for_initial_states()
+        await raw.connect()
+
+        # A well formed command: fixed32 key, varint state
+        await raw.send_raw(SWITCH_COMMAND, key + on)
+        await waiter.expect(switch_is(True))
+        await raw.send_raw(SWITCH_COMMAND, key + off)
+        await waiter.expect(switch_is(False))
+
+        # The same field with the wrong wire type is dropped, and a varint key never matches an
+        # entity; each of these would turn the switch on if the payload were read as a varint
+        seen = len(switch_states)
+        await raw.send_raw(SWITCH_COMMAND, key + tag(2, WIRE_LENGTH) + b"\x01\x01")
+        await raw.send_raw(
+            SWITCH_COMMAND, key + tag(2, WIRE_FIXED32) + b"\x01\x00\x00\x00"
+        )
+        await raw.send_raw(
+            SWITCH_COMMAND, tag(1, WIRE_VARINT) + encode_varint(switch.key) + on
+        )
+        # Ordered on the raw socket itself: this frame cannot be parsed before the bad ones, so
+        # the only switch state since the marker must be the one it produces
+        await raw.send_raw(SWITCH_COMMAND, key + on)
+        await waiter.expect(switch_is(True), label="switch on after wrong wire types")
+        assert switch_states[seen:] == [True]
+        await raw.send_raw(SWITCH_COMMAND, key + off)
+        await waiter.expect(switch_is(False))
+
+        # Truncated bodies stop the decode loop without taking the connection down: a tag with its
+        # continuation bit set and nothing after it, a length prefix past the end of the payload,
+        # and a fixed32 with two of its four bytes
+        seen = len(switch_states)
+        await raw.send_raw(SWITCH_COMMAND, key + b"\x80")
+        await raw.send_raw(SWITCH_COMMAND, key + tag(2, WIRE_LENGTH) + b"\x7f" + b"ab")
+        await raw.send_raw(SWITCH_COMMAND, tag(1, WIRE_FIXED32) + b"\x01\x02")
+        await raw.send_raw(SWITCH_COMMAND, key + on)
+        await waiter.expect(switch_is(True), label="switch on after truncated frames")
+        assert switch_states[seen:] == [True]
+        await raw.send_raw(SWITCH_COMMAND, key + off)
+        await waiter.expect(switch_is(False))
+
+        # A negative number goes through the fixed32 float path of a normal client
+        client.number_command(number.key, -77.5)
+        await waiter.expect(number_is(-77.5))
+
+        # An unknown field ahead of the known ones is skipped; field 200 needs a two byte tag
+        await raw.send_raw(
+            SWITCH_COMMAND, tag(200, WIRE_VARINT) + encode_varint(300) + key + on
+        )
+        await waiter.expect(switch_is(True))
+
+        # Two byte tags (effect fields 18 and 19) and a two byte varint (300 ms transition)
+        client.light_command(
+            light.key, state=True, brightness=0.5, transition_length=0.3, effect="Pulse"
+        )
+        await waiter.expect(
+            lambda s: (
+                isinstance(s, LightState) and s.key == light.key and s.effect == "Pulse"
+            )
+        )
+        client.light_command(light.key, effect="None", state=False)
+        await waiter.expect(
+            lambda s: isinstance(s, LightState) and s.key == light.key and not s.state
+        )
+
+        # A string whose length prefix needs two varint bytes
+        long_text = "w" * 200
+        client.text_command(text.key, long_text)
+        await waiter.expect(
+            lambda s: (
+                isinstance(s, TextState) and s.key == text.key and s.state == long_text
+            )
+        )

tests/integration/test_api_empty_message_roundtrip.py

@@ -0,0 +1,37 @@
+"""Messages without fields go through the shared ProtoMessage entry points on both directions."""
+
+from __future__ import annotations
+
+from aioesphomeapi import api_pb2
+import pytest
+
+from .raw_api_client import MESSAGE_TYPE_OF, RawApiClient
+from .types import RunCompiledFunction
+
+
+@pytest.mark.asyncio
+async def test_api_empty_message_roundtrip(
+    yaml_config: str,
+    run_compiled: RunCompiledFunction,
+    unused_tcp_port: int,
+) -> None:
+    async with run_compiled(yaml_config), RawApiClient(unused_tcp_port) as client:
+        await client.connect()
+
+        # Field free request and reply on the plain send path
+        await client.send_message(api_pb2.PingRequest())
+        await client.read_until_frame(MESSAGE_TYPE_OF[api_pb2.PingResponse])
+
+        # Field free request answered by a message with fields, and a list that ends with
+        # the field free ListEntitiesDoneResponse through the batching path
+        await client.send_message(api_pb2.DeviceInfoRequest())
+        await client.read_until_frame(MESSAGE_TYPE_OF[api_pb2.DeviceInfoResponse])
+        await client.send_message(api_pb2.ListEntitiesRequest())
+        await client.read_until_frame(MESSAGE_TYPE_OF[api_pb2.ListEntitiesDoneResponse])
+        assert (
+            client.frame_counts[MESSAGE_TYPE_OF[api_pb2.ListEntitiesSwitchResponse]]
+            == 1
+        )
+
+        await client.send_message(api_pb2.DisconnectRequest())
+        await client.read_until_frame(MESSAGE_TYPE_OF[api_pb2.DisconnectResponse])

tests/integration/test_api_encode_boundaries.py

@@ -0,0 +1,78 @@
+"""Encode paths at their branch boundaries: zero skipped float, fixed32 state, negative int32,
+length prefixes of two varint bytes and two byte field tags."""
+
+from __future__ import annotations
+
+import asyncio
+
+from aioesphomeapi import (
+    NumberState,
+    SelectInfo,
+    SensorInfo,
+    SensorState,
+    TextSensorState,
+)
+import pytest
+
+from .state_utils import InitialStateHelper, StateWaiter, require_entity
+from .types import APIClientConnectedFactory, RunCompiledFunction
+
+LONG_OPTION = (
+    "option-with-a-name-long-enough-that-its-length-prefix-needs-two-varint-bytes-"
+    "when-the-list-entities-response-is-encoded-xxxxxxxxxx"
+)
+
+
+@pytest.mark.asyncio
+async def test_api_encode_boundaries(
+    yaml_config: str,
+    run_compiled: RunCompiledFunction,
+    api_client_connected: APIClientConnectedFactory,
+) -> None:
+    async with run_compiled(yaml_config), api_client_connected() as client:
+        device_info, (entities, _) = await asyncio.gather(
+            client.device_info(), client.list_entities_services()
+        )
+        assert device_info.suggested_area == "Kitchen"
+
+        sensor = require_entity(entities, "zero_then_value", SensorInfo)
+        assert sensor.accuracy_decimals == -2
+        select = require_entity(entities, "long_option_select", SelectInfo)
+        assert len(LONG_OPTION) >= 128
+        assert select.options == ["short", LONG_OPTION]
+        text = require_entity(entities, "long_text")
+        number = require_entity(entities, "negative_number")
+        button = require_entity(entities, "publish_values")
+
+        initial = InitialStateHelper(entities)
+        waiter = StateWaiter()
+        client.subscribe_states(initial.on_state_wrapper(waiter.on_state))
+        await initial.wait_for_initial_states()
+
+        # A float of exactly zero is skipped on the wire and must still read as 0.0, not missing
+        first = initial.initial_states[sensor.key]
+        assert isinstance(first, SensorState)
+        assert first.state == 0.0 and not first.missing_state
+        first_number = initial.initial_states[number.key]
+        assert isinstance(first_number, NumberState)
+        assert first_number.state == -123.5
+
+        client.button_command(button.key)
+        await asyncio.gather(
+            waiter.expect(
+                lambda s: (
+                    isinstance(s, SensorState)
+                    and s.key == sensor.key
+                    and s.state == 12.5
+                ),
+                label="sensor 12.5",
+            ),
+            waiter.expect(
+                lambda s: (
+                    isinstance(s, TextSensorState)
+                    and s.key == text.key
+                    and s.state == "y" * 200
+                ),
+                label="text 200 x y",
+            ),
+        )

tests/script/test_determine_jobs.py

@@ -78,17 +78,6 @@ def mock_esp32_platformio_components_to_test() -> Generator[Mock, None, None]:
         yield mock
 
 
-@pytest.fixture
-def mock_esp8266_native_components_to_test() -> Generator[Mock, None, None]:
-    """Mock esp8266_native_components_to_test from determine_jobs.
-
-    main() drives both the ``esp8266_native`` boolean output and the
-    ``esp8266_native_components`` CSV from this one function.
-    """
-    with patch.object(determine_jobs, "esp8266_native_components_to_test") as mock:
-        yield mock
-
-
 @pytest.fixture
 def mock_determine_cpp_unit_tests() -> Generator[Mock, None, None]:
     """Mock determine_cpp_unit_tests from helpers."""
@@ -117,7 +106,6 @@ def clear_determine_jobs_caches() -> None:
     """Clear all cached functions before each test."""
     determine_jobs._is_clang_tidy_full_scan.cache_clear()
     determine_jobs._component_has_tests.cache_clear()
-    determine_jobs._cached_components_closure.cache_clear()
 
 
 def test_main_all_tests_should_run(
@@ -128,7 +116,6 @@ def test_main_all_tests_should_run(
     mock_should_run_import_time: Mock,
     mock_should_run_device_builder: Mock,
     mock_esp32_platformio_components_to_test: Mock,
-    mock_esp8266_native_components_to_test: Mock,
     mock_changed_files: Mock,
     mock_determine_cpp_unit_tests: Mock,
     capsys: pytest.CaptureFixture[str],
@@ -145,7 +132,6 @@ def test_main_all_tests_should_run(
     mock_should_run_import_time.return_value = True
     mock_should_run_device_builder.return_value = True
     mock_esp32_platformio_components_to_test.return_value = ["api", "esp32"]
-    mock_esp8266_native_components_to_test.return_value = ["api", "logger"]
     mock_determine_cpp_unit_tests.return_value = (False, ["wifi", "api", "sensor"])
 
     # Mock changed_files to return non-component files (to avoid memory impact)
@@ -222,8 +208,6 @@ def test_main_all_tests_should_run(
     assert output["device_builder"] is True
     assert output["esp32_platformio"] is True
     assert output["esp32_platformio_components"] == "api,esp32"
-    assert output["esp8266_native"] is True
-    assert output["esp8266_native_components"] == "api,logger"
     assert output["changed_components"] == ["wifi", "api", "sensor"]
     # changed_components_with_tests will only include components that actually have test files
     assert "changed_components_with_tests" in output
@@ -260,7 +244,6 @@ def test_main_no_tests_should_run(
     mock_should_run_import_time: Mock,
     mock_should_run_device_builder: Mock,
     mock_esp32_platformio_components_to_test: Mock,
-    mock_esp8266_native_components_to_test: Mock,
     mock_changed_files: Mock,
     mock_determine_cpp_unit_tests: Mock,
     capsys: pytest.CaptureFixture[str],
@@ -277,7 +260,6 @@ def test_main_no_tests_should_run(
     mock_should_run_import_time.return_value = False
     mock_should_run_device_builder.return_value = False
     mock_esp32_platformio_components_to_test.return_value = []
-    mock_esp8266_native_components_to_test.return_value = []
     mock_determine_cpp_unit_tests.return_value = (False, [])
 
     # Mock changed_files to return no component files
@@ -320,8 +302,6 @@ def test_main_no_tests_should_run(
     assert output["device_builder"] is False
     assert output["esp32_platformio"] is False
     assert output["esp32_platformio_components"] == ""
-    assert output["esp8266_native"] is False
-    assert output["esp8266_native_components"] == ""
     assert output["changed_components"] == []
     assert output["changed_components_with_tests"] == []
     assert output["component_test_count"] == 0
@@ -1013,10 +993,6 @@ _ESP32_PLATFORMIO_FULL_LIST_FILES = [
     # PlatformIO subsystem (path-prefix trigger) + build generator
     ["esphome/platformio/runner.py"],
     ["esphome/platformio/toolchain.py"],
-    # The pch modules are standalone triggers, not the whole build_helpers/
-    ["esphome/build_helpers/pch.py"],
-    ["esphome/build_helpers/ccache.py"],
-    ["esphome/build_helpers/idedata.py"],
     ["esphome/build_gen/platformio.py"],
     # Workflow / harness files
     ["script/test_build_components.py"],
@@ -1075,9 +1051,6 @@ def test_esp32_platformio_components_to_test_returns_full_list_on_infrastructure
         # Non-PlatformIO files in esphome/build_gen/ do NOT trigger the
         # full list -- only esphome/build_gen/platformio.py is a trigger.
         (["esphome/build_gen/espidf.py"], [], []),
-        # build_helpers modules the pch does not import are not triggers.
-        (["esphome/build_helpers/size_summary.py"], [], []),
-        (["esphome/build_helpers/ninja.py"], [], []),
         # Docs / unrelated files -> empty.
         (["README.md"], [], []),
         ([], [], []),
@@ -3178,78 +3151,6 @@ def test_memory_impact_elf_layouts_are_found(tmp_path: Path) -> None:
         assert find_elf_path(build_path) == elf, f"{platform} ELF not found"
 
 
-@pytest.mark.parametrize(
-    "changed",
-    [
-        "esphome/arduino8266/framework.py",
-        "esphome/build_gen/arduino8266.py",
-        "esphome/components/esp8266/build_surgery.py",
-        # Shared modules the native build depends on
-        "esphome/build_helpers/idedata.py",
-        "esphome/platformio/library.py",
-        # Top-level esphome/*.py modules the backend imports directly
-        "esphome/framework_helpers.py",
-        "esphome/writer.py",
-        # esp8266/__init__.py imports copy_ccache_script from it
-        "esphome/platformio/toolchain.py",
-        # The composite cache action must not ship unexercised
-        ".github/actions/cache-arduino8266/action.yml",
-    ],
-)
-def test_esp8266_native_components_full_list_on_infra_change(changed: str) -> None:
-    """Native-ESP8266 infrastructure changes run the full test list."""
-    with (
-        patch.object(determine_jobs, "changed_files", return_value=[changed]),
-        patch.object(
-            determine_jobs,
-            "get_components_with_dependencies",
-            return_value=["wifi"],
-        ),
-    ):
-        result = determine_jobs.esp8266_native_components_to_test()
-        assert result == sorted(determine_jobs.ESP8266_NATIVE_TEST_COMPONENTS)
-
-
-@pytest.mark.parametrize(
-    ("changed_files", "dependency_closure", "expected"),
-    [
-        # Tested component changed -- narrow to the intersection.
-        (
-            ["esphome/components/mqtt/mqtt_client.cpp"],
-            ["mqtt", "json"],
-            ["mqtt"],
-        ),
-        # Components outside the test set return an empty list (job skipped).
-        (
-            ["esphome/components/wifi/wifi_component.cpp"],
-            ["wifi", "network"],
-            [],
-        ),
-        # espidf infrastructure is not an esp8266-native trigger; the
-        # native backend depends on esphome/build_helpers/ instead.
-        (["esphome/build_gen/espidf.py"], [], []),
-        (["esphome/espidf/toolchain.py"], [], []),
-        (["README.md"], [], []),
-    ],
-)
-def test_esp8266_native_components_to_test_narrowing(
-    changed_files: list[str],
-    dependency_closure: list[str],
-    expected: list[str],
-) -> None:
-    """Component changes narrow the native-ESP8266 test list."""
-    with (
-        patch.object(determine_jobs, "changed_files", return_value=changed_files),
-        patch.object(
-            determine_jobs,
-            "get_components_with_dependencies",
-            return_value=dependency_closure,
-        ),
-    ):
-        result = determine_jobs.esp8266_native_components_to_test()
-        assert result == expected
-
-
 def test_compute_integration_test_buckets_no_durations_full_fanout() -> None:
     """Without recorded durations the fan-out stays at the maximum."""
     files = [f"tests/integration/test_{i:03d}.py" for i in range(15)]

tests/script/test_sync_dependency_versions.py

@@ -1,219 +0,0 @@
-"""Unit tests for script/sync_dependency_versions.py."""
-
-from pathlib import Path
-import subprocess
-import sys
-
-import pytest
-import yamlrocks
-
-sys.path.insert(0, str((Path(__file__).parent / ".." / ".." / "script").resolve()))
-
-import sync_dependency_versions as sync_mod  # noqa: E402
-
-PRECOMMIT = """\
-# See https://pre-commit.com for more information
-repos:
-  - repo: https://github.com/astral-sh/ruff-pre-commit
-    # Ruff version.
-    rev: v0.1.0
-    hooks:
-      - id: ruff
-  - repo: https://github.com/PyCQA/flake8
-    rev: 7.0.0
-    hooks:
-      - id: flake8
-  - repo: https://github.com/asottile/pyupgrade
-    rev: v3.0.0
-    hooks:
-      - id: pyupgrade
-  - repo: https://github.com/pre-commit/mirrors-clang-format
-    rev: v13.0.1
-    hooks:
-      - id: clang-format
-  - repo: https://github.com/adrienverge/yamllint.git
-    rev: v1.0.0
-    hooks:
-      - id: yamllint
-  - repo: local
-    hooks:
-      - id: pylint
-"""
-
-REQ_TEST = """\
-pylint==4.0.8
-flake8==7.1.0
-ruff==0.2.0  # comment
-pyupgrade==3.0.0
-"""
-
-REQ_DEV = """\
-clang-format==13.0.1
-yamllint==1.0.0
-"""
-
-RUFF_REPO = "https://github.com/astral-sh/ruff-pre-commit"
-DUPLICATE_RUFF_BLOCK = f"  - repo: {RUFF_REPO}\n    rev: v0.3.0\n    hooks: []\n"
-
-EXPECTED_DRIFT = ["ruff: 0.1.0 -> 0.2.0", "flake8: 7.0.0 -> 7.1.0"]
-EXPECTED_PRECOMMIT = PRECOMMIT.replace("rev: v0.1.0", "rev: v0.2.0").replace(
-    "rev: 7.0.0", "rev: 7.1.0"
-)
-
-
-@pytest.fixture
-def root(tmp_path: Path) -> Path:
-    """A fake checkout where ruff (v-prefixed) and flake8 (bare) have drifted."""
-    (tmp_path / ".pre-commit-config.yaml").write_text(PRECOMMIT)
-    (tmp_path / "requirements_test.txt").write_text(REQ_TEST)
-    (tmp_path / "requirements_dev.txt").write_text(REQ_DEV)
-    return tmp_path
-
-
-def _load(text: str) -> object:
-    return yamlrocks.loads(text.encode(), option=yamlrocks.OPT_ROUND_TRIP)
-
-
-@pytest.mark.parametrize(
-    ("requirements", "expected"),
-    [
-        ("prek==0.5.1  # comment\n", "0.5.1"),
-        ("Prek==0.5.1\n", "0.5.1"),
-        ("other==1.0\nprek==0.5.1\n", "0.5.1"),
-        ("prek>=0.5.1\n", None),
-        ("prek-extra==0.5.1\n", None),
-        ("", None),
-    ],
-)
-def test_read_requirement_version(requirements: str, expected: str | None) -> None:
-    assert sync_mod.read_requirement_version(requirements, "prek") == expected
-
-
-def test_find_repo_entry() -> None:
-    entry = sync_mod.find_repo_entry(_load(PRECOMMIT), RUFF_REPO)
-    assert entry["rev"] == "v0.1.0"
-
-
-@pytest.mark.parametrize(
-    ("text", "message"),
-    [
-        ("hooks: []\n", "missing key 'repos'"),
-        ("repos:\n  - rev: 1.0.0\n", "missing key 'repo'"),
-        (PRECOMMIT + DUPLICATE_RUFF_BLOCK, "found 2"),
-        ("repos:\n  - repo: other\n    rev: 1.0.0\n", "found 0"),
-    ],
-)
-def test_find_repo_entry_errors(text: str, message: str) -> None:
-    with pytest.raises(sync_mod.SyncError, match=message):
-        sync_mod.find_repo_entry(_load(text), RUFF_REPO)
-
-
-@pytest.mark.parametrize(
-    ("rev", "expected"),
-    [("v0.1.0", ("v", "0.1.0")), ("7.0.0", ("", "7.0.0")), ("'1.0'", ("", "1.0"))],
-)
-def test_current_rev(rev: str, expected: tuple[str, str]) -> None:
-    doc = _load(f"repos:\n  - repo: {RUFF_REPO}\n    rev: {rev}\n")
-    assert sync_mod.current_rev(doc["repos"][0], RUFF_REPO) == expected
-
-
-@pytest.mark.parametrize(
-    ("block", "message"),
-    [("    hooks: []\n", "has no rev"), ("    rev: 1.0\n", "not a string: 1.0")],
-)
-def test_current_rev_errors(block: str, message: str) -> None:
-    doc = _load(f"repos:\n  - repo: {RUFF_REPO}\n{block}")
-    with pytest.raises(sync_mod.SyncError, match=message):
-        sync_mod.current_rev(doc["repos"][0], RUFF_REPO)
-
-
-def test_sync_reports_without_writing(root: Path) -> None:
-    assert sync_mod.sync(root, write=False) == EXPECTED_DRIFT
-    assert (root / ".pre-commit-config.yaml").read_text() == PRECOMMIT
-
-
-def test_sync_writes_keeps_layout_and_is_idempotent(root: Path) -> None:
-    assert sync_mod.sync(root, write=True) == EXPECTED_DRIFT
-    assert (root / ".pre-commit-config.yaml").read_text() == EXPECTED_PRECOMMIT
-    assert sync_mod.sync(root, write=True) == []
-
-
-def test_sync_does_not_touch_a_config_that_matches(root: Path) -> None:
-    (root / ".pre-commit-config.yaml").write_text(EXPECTED_PRECOMMIT)
-    before = (root / ".pre-commit-config.yaml").stat().st_mtime_ns
-    assert sync_mod.sync(root, write=True) == []
-    assert (root / ".pre-commit-config.yaml").stat().st_mtime_ns == before
-
-
-def test_sync_missing_requirement_pin(root: Path) -> None:
-    (root / "requirements_dev.txt").write_text("")
-    with pytest.raises(sync_mod.SyncError, match="no 'clang-format==' pin"):
-        sync_mod.sync(root, write=True)
-
-
-def test_sync_propagates_config_errors(root: Path) -> None:
-    (root / ".pre-commit-config.yaml").write_text(PRECOMMIT + DUPLICATE_RUFF_BLOCK)
-    with pytest.raises(sync_mod.SyncError, match="found 2"):
-        sync_mod.sync(root, write=True)
-
-
-def test_main_check_reports_drift(
-    root: Path, capsys: pytest.CaptureFixture[str]
-) -> None:
-    assert sync_mod.main(["--check", "--root", str(root)]) == 1
-    assert capsys.readouterr().out.splitlines() == EXPECTED_DRIFT
-    assert (root / ".pre-commit-config.yaml").read_text() == PRECOMMIT
-
-
-def test_main_writes_then_check_is_clean(
-    root: Path, capsys: pytest.CaptureFixture[str]
-) -> None:
-    assert sync_mod.main(["--root", str(root)]) == 0
-    assert capsys.readouterr().out.splitlines() == EXPECTED_DRIFT
-    assert sync_mod.main(["--check", "--root", str(root)]) == 0
-    assert capsys.readouterr().out == ""
-
-
-def test_main_reports_sync_error(
-    root: Path, capsys: pytest.CaptureFixture[str]
-) -> None:
-    (root / "requirements_dev.txt").write_text("")
-    assert sync_mod.main(["--root", str(root)]) == 1
-    assert (
-        "error: requirements_dev.txt: no 'clang-format==' pin"
-        in capsys.readouterr().err
-    )
-
-
-def test_main_defaults_to_repo_root(monkeypatch: pytest.MonkeyPatch) -> None:
-    seen: dict[str, object] = {}
-
-    def fake_sync(root: Path, *, write: bool) -> list[str]:
-        seen["root"] = root
-        seen["write"] = write
-        return []
-
-    monkeypatch.setattr(sync_mod, "sync", fake_sync)
-    assert sync_mod.main([]) == 0
-    assert seen == {"root": sync_mod.REPO_ROOT, "write": True}
-
-
-def test_repository_is_in_sync() -> None:
-    """The real checkout must match; a failure here means a rev has drifted.
-
-    Also proves every SYNC_TARGETS entry still resolves in the real files.
-    """
-    assert sync_mod.sync(sync_mod.REPO_ROOT, write=False) == []
-
-
-def test_cli_entry_point(root: Path) -> None:
-    """Run the script the way the workflow does, as a subprocess."""
-    script = Path(sync_mod.__file__)
-    result = subprocess.run(
-        [sys.executable, str(script), "--check", "--root", str(root)],
-        capture_output=True,
-        text=True,
-        check=False,
-    )
-    assert result.returncode == 1
-    assert result.stdout.splitlines() == EXPECTED_DRIFT

tests/script/test_test_build_components.py

@@ -236,98 +236,3 @@ def test_run_grouped_test_closes_group_when_subprocess_raises(
         )
 
     assert "::endgroup::" in capsys.readouterr().out
-
-
-def test_components_empty_match_fails_with_flag(
-    capsys: pytest.CaptureFixture[str],
-) -> None:
-    """Under --fail-on-no-tests, a real component filtered to a platform
-    with no matching test file must not pass CI as a green zero-component
-    compile."""
-    rc = tbc.test_components(
-        ["logger"],
-        "zz-none",
-        "compile",
-        False,
-        enable_grouping=False,
-        fail_on_no_tests=True,
-    )
-    assert rc == 1
-    assert "No tests ran for requested pattern(s): logger" in (capsys.readouterr().out)
-
-
-def test_components_component_with_no_base_file_fails_with_flag(
-    capsys: pytest.CaptureFixture[str],
-    monkeypatch: pytest.MonkeyPatch,
-) -> None:
-    """A component whose fixture matches the platform but whose platform has
-    no base file builds nothing; under the flag that silent zero fails by
-    component name instead of hiding behind other components."""
-    monkeypatch.setattr(tbc, "get_platform_base_files", lambda base_dir: {})
-    rc = tbc.test_components(
-        ["logger"],
-        "esp8266-ard",
-        "compile",
-        False,
-        enable_grouping=False,
-        fail_on_no_tests=True,
-    )
-    assert rc == 1
-    assert "No tests ran for requested pattern(s): logger" in (capsys.readouterr().out)
-
-
-def test_components_blank_list_fails_with_flag(
-    capsys: pytest.CaptureFixture[str],
-) -> None:
-    """A fully blank component list must not slide into the baseline
-    fallback and exit green under the flag."""
-    rc = tbc.test_components(
-        [""], "esp8266-ard", "compile", False, fail_on_no_tests=True
-    )
-    assert rc == 1
-    assert "blank component list" in capsys.readouterr().out
-
-
-def test_components_wildcard_no_match_fails_with_flag(
-    capsys: pytest.CaptureFixture[str],
-) -> None:
-    """A wildcard matching nothing must not degrade to the synthetic
-    baseline build and exit green under the flag."""
-    rc = tbc.test_components(
-        ["zz_no_such*"],
-        "esp8266-ard",
-        "compile",
-        False,
-        enable_grouping=False,
-        fail_on_no_tests=True,
-    )
-    assert rc == 1
-    assert "No components found matching" in capsys.readouterr().out
-
-
-def test_components_empty_match_tolerated_without_flag() -> None:
-    """The esp32-ard smoke leg deliberately builds only the subset with a
-    matching fixture; without the flag an empty match stays green."""
-    assert (
-        tbc.test_components(
-            ["logger"], "zz-none", "compile", False, enable_grouping=False
-        )
-        == 0
-    )
-
-
-def test_components_unknown_component_fails_with_flag(
-    capsys: pytest.CaptureFixture[str],
-) -> None:
-    """A renamed smoke-test component must shrink coverage loudly, not fall
-    into the reference-baseline build."""
-    rc = tbc.test_components(
-        ["no_such_component_xyz"],
-        "esp8266-ard",
-        "compile",
-        False,
-        enable_grouping=False,
-        fail_on_no_tests=True,
-    )
-    assert rc == 1
-    assert "No components found matching" in capsys.readouterr().out

tests/unit_tests/build_gen/test_build_tool.py

@@ -2,7 +2,6 @@
 
 from __future__ import annotations
 
-import os
 from pathlib import Path
 import subprocess
 import sys
@@ -245,20 +244,3 @@ def test_copy_failure_leaves_no_partial_output(tmp_path: Path) -> None:
     ):
         assert build_tool.main() == 1
     assert not dst.exists()
-
-
-def test_touch_creates_and_updates_stamp(tmp_path: Path) -> None:
-    stamp = tmp_path / "esphome_pch.probe"
-    assert build_tool._run_touch(str(stamp)) == 0
-    assert stamp.is_file()
-    os.utime(stamp, (1, 1))
-    assert build_tool._run_touch(str(stamp)) == 0
-    assert stamp.stat().st_mtime > 1
-
-
-def test_touch_reports_failure(
-    tmp_path: Path, capsys: pytest.CaptureFixture[str]
-) -> None:
-    missing_dir = tmp_path / "gone" / "stamp"
-    assert build_tool._run_touch(str(missing_dir)) == 1
-    assert "touch:" in capsys.readouterr().err