[libretiny] Shorten the LN882x zero-size allocation comment

esphome/components/api/__init__.py

@@ -601,7 +601,7 @@ async def to_code(config: ConfigType) -> None:
 
     if (encryption_config := config.get(CONF_ENCRYPTION, None)) is not None:
         if key := encryption_config.get(CONF_KEY):
-            cg.add(var.set_noise_psk(new_psk_progmem(config[CONF_ID], key)))
+            cg.add(var.set_noise_psk(new_psk_progmem(key)))
             cg.add_define("USE_API_NOISE_PSK_FROM_YAML")
         else:
             # No key provided, but encryption desired

esphome/components/es8311/es8311.cpp

@@ -92,6 +92,21 @@ uint8_t ES8311::calculate_resolution_value(ES8311Resolution resolution) {
   }
 }
 
+/// Encodes the MCLK pre-multiplier for REG02 bits 3-4. The coefficient table stores the multiplier as the factor
+/// itself (1, 2, 4 or 8), while the register takes 0, 1, 2 or 3 (ES8311 datasheet, register 0x02 MULT_PRE).
+static uint8_t encode_pre_mult(uint8_t pre_mult) {
+  switch (pre_mult) {
+    case 2:
+      return 1;
+    case 4:
+      return 2;
+    case 8:
+      return 3;
+    default:
+      return 0;
+  }
+}
+
 const ES8311Coefficient *ES8311::get_coefficient(uint32_t mclk, uint32_t rate) {
   for (const auto &coefficient : ES8311_COEFFICIENTS) {
     if (coefficient.mclk == mclk && coefficient.rate == rate)
@@ -127,7 +142,7 @@ bool ES8311::configure_clock_() {
   ES8311_ERROR_CHECK(this->read_byte(ES8311_REG02_CLK_MANAGER, &reg02));
   reg02 &= 0x07;
   reg02 |= (coefficient->pre_div - 1) << 5;
-  reg02 |= coefficient->pre_mult << 3;
+  reg02 |= encode_pre_mult(coefficient->pre_mult) << 3;
   ES8311_ERROR_CHECK(this->write_byte(ES8311_REG02_CLK_MANAGER, reg02));
 
   // Register 0x03

esphome/components/esphome/ota/__init__.py

@@ -360,7 +360,7 @@ async def to_code(config: ConfigType) -> None:
         # Build time key: the ota keeps its own pointer so safe mode, which
         # has no api server, still has it
         cg.add_define("USE_OTA_ENCRYPTION")
-        cg.add(var.set_noise_psk(new_psk_progmem(config[CONF_ID], key)))
+        cg.add(var.set_noise_psk(new_psk_progmem(key)))
     elif CONF_ENCRYPTION in api_conf:
         # Runtime key: found in the api server, or in preferences in safe mode
         cg.add_define("USE_OTA_ENCRYPTION")

esphome/components/font/__init__.py

@@ -726,7 +726,8 @@ async def to_code(config):
         )
     ]
 
-    glyphs = cg.static_const_array(config[CONF_RAW_GLYPH_ID], glyph_initializer)
+    # constexpr Glyph table in flash; on ESP8266 static_const_array would place it in RAM.
+    glyphs = cg.progmem_array(config[CONF_RAW_GLYPH_ID], glyph_initializer)
 
     font_height = pt_to_px(base_font.size.height)
     ascender = pt_to_px(base_font.size.ascender)

esphome/components/font/font.cpp

@@ -309,7 +309,8 @@ void Font::print(int x_start, int y_start, display::Display *display, Color colo
       // Unknown char, skip
       ESP_LOGW(TAG, "Codepoint 0x%08" PRIx32 " not found in font", code_point);
       if (!this->glyphs_.empty()) {
-        uint8_t glyph_width = this->glyphs_[0].advance;
+        // Full-width read: a narrowing byte load would fault on a PROGMEM table on ESP8266.
+        int glyph_width = this->glyphs_[0].advance;
         display->rectangle(x_at, y_start, glyph_width, this->height_, color);
         x_at += glyph_width;
       }

esphome/components/font/font.h

@@ -1,5 +1,7 @@
 #pragma once
 
+#include <type_traits>
+
 #include "esphome/core/color.h"
 #include "esphome/core/datatypes.h"
 #include "esphome/core/defines.h"
@@ -36,6 +38,18 @@ class Glyph final {
   int width;
   int height;
 };
+// The glyph table lives in flash, read with plain loads, which ESP8266 only allows for whole words.
+static_assert(std::is_same_v<decltype(Glyph::code_point), const uint32_t>, "Glyph fields must stay word sized");
+static_assert(std::is_same_v<decltype(Glyph::data), const uint8_t *>, "Glyph fields must stay word sized");
+static_assert(std::is_same_v<decltype(Glyph::advance), int>, "Glyph fields must stay word sized");
+static_assert(std::is_same_v<decltype(Glyph::offset_x), int>, "Glyph fields must stay word sized");
+static_assert(std::is_same_v<decltype(Glyph::offset_y), int>, "Glyph fields must stay word sized");
+static_assert(std::is_same_v<decltype(Glyph::width), int>, "Glyph fields must stay word sized");
+static_assert(std::is_same_v<decltype(Glyph::height), int>, "Glyph fields must stay word sized");
+#ifdef USE_ESP8266
+static_assert(alignof(Glyph) == sizeof(uint32_t), "Glyph fields must stay word sized");
+static_assert(sizeof(Glyph) == 7 * sizeof(uint32_t), "Glyph is read from flash with word loads");
+#endif
 
 class Font final
 #ifdef USE_DISPLAY

esphome/components/homeassistant/number/__init__.py

@@ -7,19 +7,23 @@ from .. import (
     HOME_ASSISTANT_IMPORT_CONTROL_SCHEMA,
     homeassistant_ns,
     setup_home_assistant_entity,
+    validate_entity_domain,
 )
 
 CODEOWNERS = ["@landonr"]
 DEPENDENCIES = ["api"]
 
+SUPPORTED_DOMAINS = ["input_number", "number"]
+
 HomeassistantNumber = homeassistant_ns.class_(
     "HomeassistantNumber", number.Number, cg.Component
 )
 
-CONFIG_SCHEMA = (
+CONFIG_SCHEMA = cv.All(
     number.number_schema(HomeassistantNumber)
     .extend(HOME_ASSISTANT_IMPORT_CONTROL_SCHEMA)
-    .extend(cv.COMPONENT_SCHEMA)
+    .extend(cv.COMPONENT_SCHEMA),
+    validate_entity_domain("number", SUPPORTED_DOMAINS),
 )
 
 

esphome/components/homeassistant/number/homeassistant_number.cpp

@@ -1,5 +1,7 @@
 #include "homeassistant_number.h"
 
+#include <cstring>
+
 #include "esphome/components/api/api_pb2.h"
 #include "esphome/components/api/api_server.h"
 #include "esphome/core/log.h"
@@ -80,12 +82,19 @@ void HomeassistantNumber::control(float value) {
 
   this->publish_state(value);
 
-  static constexpr auto SERVICE_NAME = StringRef::from_lit("number.set_value");
+  static constexpr auto NUMBER_SERVICE_NAME = StringRef::from_lit("number.set_value");
+  static constexpr auto INPUT_NUMBER_SERVICE_NAME = StringRef::from_lit("input_number.set_value");
+  static constexpr char INPUT_PREFIX[] = "input_";
   static constexpr auto ENTITY_ID_KEY = StringRef::from_lit("entity_id");
   static constexpr auto VALUE_KEY = StringRef::from_lit("value");
 
   api::HomeassistantActionRequest resp;
-  resp.service = SERVICE_NAME;
+  // input_number entities have their own set_value action
+  if (strncmp(this->entity_id_, INPUT_PREFIX, sizeof(INPUT_PREFIX) - 1) == 0) {
+    resp.service = INPUT_NUMBER_SERVICE_NAME;
+  } else {
+    resp.service = NUMBER_SERVICE_NAME;
+  }
 
   resp.data.init(2);
   auto &entity_id = resp.data.emplace_back();

esphome/components/http_request/http_request.cpp

@@ -25,11 +25,10 @@ std::string HttpContainer::get_response_header(const std::string &header_name) {
   auto lower = str_lower_case(header_name);  // NOLINT
   for (const auto &entry : this->response_headers_) {
     if (entry.name == lower) {
-      ESP_LOGD(TAG, "Header with name %s found with value %s", lower.c_str(), entry.value.c_str());
+      ESP_LOGV(TAG, "Header with name %s found with value %s", lower.c_str(), entry.value.c_str());
       return entry.value;
     }
   }
-  ESP_LOGW(TAG, "No header with name %s found", lower.c_str());
   return "";
 }
 

esphome/components/http_request/http_request.h

@@ -268,6 +268,11 @@ class HttpContainer : public Parented<HttpRequestComponent> {
     return !this->is_chunked_ && this->bytes_read_ >= this->content_length;
   }
 
+  /**
+   * @brief Get the value of a response header by name.
+   * @param header_name The name of the header to retrieve.
+   * @return The value of the header if found, otherwise an empty string.
+   */
   std::string get_response_header(const std::string &header_name);
 
  protected:

esphome/components/i2s_audio/microphone/i2s_audio_microphone.h

@@ -60,11 +60,11 @@ class I2SAudioMicrophone final : public I2SAudioIn, public microphone::Microphon
 
   gpio_num_t din_pin_{I2S_GPIO_UNUSED};
   i2s_chan_handle_t rx_handle_;
-  bool pdm_{false};
 #if SOC_I2S_SUPPORTS_PDM_RX
   i2s_pdm_dsr_t pdm_dsr_{I2S_PDM_DSR_8S};
 #endif
 
+  bool pdm_{false};
   bool correct_dc_offset_;
   bool locked_driver_{false};
   int32_t dc_offset_prev_input_{0};

esphome/components/ld2450/ld2450.h

@@ -176,6 +176,10 @@ class LD2450Component : public Component, public uart::UARTDevice {
   bool bluetooth_on_{false};
   Target target_info_[MAX_TARGETS];
   Zone zone_config_[MAX_ZONES];
+#ifdef USE_TEXT_SENSOR
+  // Byte aligned, so it packs after zone_config_ instead of padding before data_callback_
+  std::array<Deduplicator<uint8_t>, MAX_TARGETS> direction_dedup_{};
+#endif
 
 #ifdef USE_NUMBER
   ESPPreferenceObject pref_;  // only used when numbers are in use
@@ -194,7 +198,6 @@ class LD2450Component : public Component, public uart::UARTDevice {
 #endif
 #ifdef USE_TEXT_SENSOR
   std::array<text_sensor::TextSensor *, MAX_TARGETS> direction_text_sensors_{};
-  std::array<Deduplicator<uint8_t>, MAX_TARGETS> direction_dedup_{};
 #endif
 
   LazyCallbackManager<void()> data_callback_;

esphome/components/ledc/ledc_output.h

@@ -35,11 +35,11 @@ class LEDCOutput final : public output::FloatOutput, public Component {
   InternalGPIOPin *pin_;
   uint8_t channel_{};
   uint8_t bit_depth_{};
+  bool initialized_ = false;
   float phase_angle_{0.0f};
   float frequency_{};
   float duty_{0.0f};
   uint32_t last_duty_{UINT32_MAX};
-  bool initialized_ = false;
 };
 
 }  // namespace esphome::ledc

esphome/components/libretiny/__init__.py

@@ -32,6 +32,7 @@ from esphome.storage_json import StorageJSON
 from . import gpio  # noqa: F401
 from .const import (
     COMPONENT_BK72XX,
+    COMPONENT_LN882X,
     CONF_GPIO_RECOVER,
     CONF_LOGLEVEL,
     CONF_SDK_SILENT,
@@ -490,6 +491,10 @@ async def component_to_code(config):
         # Not enabled on RTL87xx/LN882x — costs more heap than it saves there.
         cg.add_build_flag("-DconfigSUPPORT_STATIC_ALLOCATION=1")
 
+    # LN882x: a zero-size allocation must not trip the SDK's assert (see ln882x_zero_malloc.c).
+    if config[CONF_COMPONENT_ID] == COMPONENT_LN882X:
+        cg.add_build_flag("-Wl,--wrap=pvPortMalloc")
+
     # RTL8710B needs FreeRTOS 8.2.3+ for xTaskNotifyGive/ulTaskNotifyTake
     # required by AsyncTCP 3.4.3+ (https://github.com/esphome/esphome/issues/10220)
     # RTL8720C (ambz2) requires FreeRTOS 10.x so this only applies to RTL8710B

esphome/components/libretiny/ln882x_zero_malloc.c

@@ -0,0 +1,13 @@
+// LN882x: a zero-size pvPortMalloc trips the SDK's malloc-failed LN_ASSERT; ask for 1 byte instead.
+
+#ifdef USE_LN882X
+
+#include <stddef.h>
+
+void *__real_pvPortMalloc(size_t size);  // NOLINT(readability-identifier-naming)
+
+void *__wrap_pvPortMalloc(size_t size) {  // NOLINT(readability-identifier-naming)
+  return __real_pvPortMalloc(size == 0 ? 1 : size);
+}
+
+#endif  // USE_LN882X

esphome/components/lvgl/__init__.py

@@ -48,6 +48,7 @@ from esphome.cpp_generator import MockObj
 from esphome.final_validate import full_config
 from esphome.helpers import write_file_if_changed
 from esphome.schema_extractors import SCHEMA_EXTRACT, schema_extractor
+from esphome.types import ConfigType
 from esphome.writer import clean_build
 from esphome.yaml_util import load_yaml
 
@@ -641,7 +642,15 @@ LVGL_TOP_LEVEL_SCHEMA = (
 )
 
 
+def _not_on_esp8266(config: ConfigType) -> ConfigType:
+    # ESP8266 does not have enough RAM for LVGL to be practical.
+    if CORE.is_esp8266:
+        raise cv.Invalid("LVGL is not supported on ESP8266")
+    return config
+
+
 LVGL_SCHEMA = cv.All(
+    _not_on_esp8266,
     container_schema(obj_spec, LVGL_TOP_LEVEL_SCHEMA),
     cv.has_at_most_one_key(CONF_PAGES, df.CONF_LAYOUT),
     add_hello_world,

esphome/components/lvgl/lvgl_esphome.cpp

@@ -1037,7 +1037,7 @@ void lv_mem_init() {}
 
 void lv_mem_deinit() {}
 
-#if defined(USE_HOST) || defined(USE_RP2) || defined(USE_ESP8266)
+#ifndef USE_ESP32
 void *lv_malloc_core(size_t size) {
   auto *ptr = malloc(size);  // NOLINT
   if (ptr == nullptr) {
@@ -1053,7 +1053,7 @@ static void *lv_alloc_draw_buf(size_t size, bool internal) {
   return malloc(size);  // NOLINT
 }
 
-#elif defined(USE_ESP32)
+#else
 static unsigned cap_bits = MALLOC_CAP_SPIRAM | MALLOC_CAP_8BIT;  // NOLINT
 
 static void *lv_alloc_draw_buf(size_t size, bool internal) {

esphome/components/microphone/microphone_source.h

@@ -34,7 +34,7 @@ class MicrophoneSource final {
    */
  public:
   MicrophoneSource(Microphone *mic, uint8_t bits_per_sample, int32_t gain_factor, bool passive)
-      : mic_(mic), bits_per_sample_(bits_per_sample), gain_factor_(gain_factor), passive_(passive) {}
+      : mic_(mic), gain_factor_(gain_factor), passive_(passive), bits_per_sample_(bits_per_sample) {}
 
   /// @brief Enables a channel to be processed through the callback.
   ///
@@ -81,11 +81,11 @@ class MicrophoneSource final {
   std::shared_ptr<std::vector<uint8_t>> processed_samples_;
 
   Microphone *mic_;
-  uint8_t bits_per_sample_;
   std::bitset<8> channels_;
   int32_t gain_factor_;
   bool enabled_{false};
   bool passive_;  // Only pass audio if ``mic_`` is already running
+  uint8_t bits_per_sample_;
 };
 
 }  // namespace esphome::microphone

esphome/components/mixer/speaker/mixer_speaker.h

@@ -107,12 +107,12 @@ class SourceSpeaker final : public speaker::Speaker, public Component {
   bool stop_gracefully_{false};
 
   bool pause_state_{false};
+  std::atomic<bool> has_contributed_{false};  // Tracks if source has contributed during this session
 
   esp_audio_libs::gain::GainRamp ducking_ramp_;
 
   std::atomic<uint32_t> pending_playback_frames_{0};
   std::atomic<uint32_t> playback_delay_frames_{0};  // Frames in output pipeline when this source started contributing
-  std::atomic<bool> has_contributed_{false};        // Tracks if source has contributed during this session
 
   EventGroupHandle_t event_group_{nullptr};
   uint32_t stopping_start_ms_{0};

esphome/components/noise/__init__.py

@@ -5,12 +5,11 @@ from typing import Any
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.const import CONF_ENCRYPTION, CONF_KEY
-from esphome.core import CORE, ID
+from esphome.core import CORE
 from esphome.cpp_generator import MockObj
 from esphome.types import ConfigType
 
 CODEOWNERS = ["@esphome/core"]
-DOMAIN = "noise"
 
 # Keep in sync with platformio.ini and esphome/idf_component.yml.
 # LIBSODIUM_VERSION must match the version noise-c pins in its manifests.
@@ -74,18 +73,13 @@ def static_encryption_key(conf: ConfigType) -> str | None:
     return (conf.get(CONF_ENCRYPTION) or {}).get(CONF_KEY) or None
 
 
-def new_psk_progmem(parent_id: ID, key: str) -> MockObj:
+def new_psk_progmem(key: str) -> MockObj:
     """Emit the decoded key as a PROGMEM array; the component keeps a pointer
     so the key never occupies RAM. Components sharing one key (api and ota)
     share the array."""
-    decoded = decode_encryption_key(key)
-    arrays: dict[bytes, MockObj] = CORE.data.setdefault(DOMAIN, {})
-    if (array := arrays.get(decoded)) is None:
-        array = arrays[decoded] = cg.progmem_array(
-            ID(f"{parent_id.id}_psk", is_declaration=True, type=cg.uint8),
-            list(decoded),
-        )
-    return array
+    return cg.shared_progmem_array(
+        "noise_psk", cg.uint8, list(decode_encryption_key(key))
+    )
 
 
 def encryption_schema(config: ConfigType | None) -> ConfigType:

esphome/components/qspi_dbi/display.py

@@ -173,12 +173,13 @@ async def to_code(config: ConfigType) -> None:
     await spi.register_spi_device(var, config, write_only=True)
 
     chip = DriverChip.chips[config[CONF_MODEL]]
-    sequence = list(chip.initsequence)
-    for seq in config.get(CONF_INIT_SEQUENCE, []):
-        sequence.extend(seq)
-    if sequence:
-        table = cg.shared_progmem_array("qspi_dbi_init_sequence", cg.uint8, sequence)
-        cg.add(var.set_init_sequence(table, len(sequence)))
+    if chip.initsequence:
+        cg.add(var.add_init_sequence(chip.initsequence))
+    if init_sequences := config.get(CONF_INIT_SEQUENCE):
+        sequence = []
+        for seq in init_sequences:
+            sequence.extend(seq)
+        cg.add(var.add_init_sequence(sequence))
 
     cg.add(var.set_color_mode(config[CONF_COLOR_ORDER]))
     cg.add(var.set_invert_colors(config[CONF_INVERT_COLORS]))

esphome/components/qspi_dbi/qspi_dbi.cpp

@@ -110,31 +110,8 @@ void QspiDbi::reset_params_(bool ready) {
 }
 
 void QspiDbi::write_init_sequence_() {
-  const uint8_t *seq = this->init_sequence_;
-  const size_t len = this->init_sequence_len_;
-  size_t index = 0;
-  while (index != len) {
-    if (len - index < 2) {
-      ESP_LOGE(TAG, "Malformed init sequence");
-      break;
-    }
-    uint8_t cmd = seq[index++];
-    uint8_t x = seq[index++];
-    if (x == DELAY_FLAG) {
-      ESP_LOGV(TAG, "Delay %dms", cmd);
-      delay(cmd);
-    } else {
-      uint8_t num_args = x & 0x7F;
-      if (len - index < num_args) {
-        ESP_LOGE(TAG, "Malformed init sequence");
-        break;
-      }
-      // The sequence is in flash, which SPI DMA cannot read
-      uint8_t args[0x80];
-      memcpy(args, seq + index, num_args);
-      this->write_command_(cmd, args, num_args);
-      index += num_args;
-    }
+  for (const auto &seq : this->init_sequences_) {
+    this->write_sequence_(seq);
   }
   this->reset_params_(true);
   this->setup_complete_ = true;
@@ -210,6 +187,31 @@ void QspiDbi::write_command_(uint8_t cmd, const uint8_t *bytes, size_t len) {
   this->disable();
 }
 
+void QspiDbi::write_sequence_(const std::vector<uint8_t> &vec) {
+  size_t index = 0;
+  while (index != vec.size()) {
+    if (vec.size() - index < 2) {
+      ESP_LOGE(TAG, "Malformed init sequence");
+      return;
+    }
+    uint8_t cmd = vec[index++];
+    uint8_t x = vec[index++];
+    if (x == DELAY_FLAG) {
+      ESP_LOGV(TAG, "Delay %dms", cmd);
+      delay(cmd);
+    } else {
+      uint8_t num_args = x & 0x7F;
+      if (vec.size() - index < num_args) {
+        ESP_LOGE(TAG, "Malformed init sequence");
+        return;
+      }
+      const auto *ptr = vec.data() + index;
+      this->write_command_(cmd, ptr, num_args);
+      index += num_args;
+    }
+  }
+}
+
 void QspiDbi::dump_config() {
   ESP_LOGCONFIG("", "QSPI_DBI Display");
   ESP_LOGCONFIG("", "Model: %s", this->model_);

esphome/components/qspi_dbi/qspi_dbi.h

@@ -101,10 +101,7 @@ class QspiDbi final : public display::DisplayBuffer,
   int get_width_internal() override { return this->width_; }
   int get_height_internal() override { return this->height_; }
   bool can_proceed() override { return this->setup_complete_; }
-  void set_init_sequence(const uint8_t *sequence, size_t len) {
-    this->init_sequence_ = sequence;
-    this->init_sequence_len_ = len;
-  }
+  void add_init_sequence(const std::vector<uint8_t> &sequence) { this->init_sequences_.push_back(sequence); }
   void set_draw_rounding(unsigned rounding) { this->draw_rounding_ = rounding; }
 
  protected:
@@ -112,6 +109,7 @@ class QspiDbi final : public display::DisplayBuffer,
     if (this->buffer_ == nullptr)
       this->init_internal_(this->width_ * this->height_ * 2);
   }
+  void write_sequence_(const std::vector<uint8_t> &vec);
   void draw_absolute_pixel_internal(int x, int y, Color color) override;
   void draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, display::ColorOrder order,
                       display::ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) override;
@@ -164,9 +162,7 @@ class QspiDbi final : public display::DisplayBuffer,
   unsigned draw_rounding_{2};
   uint8_t brightness_{0xD0};
   const char *model_{"Unknown"};
-  // Shared PROGMEM table: the model's sequence followed by any custom one
-  const uint8_t *init_sequence_{nullptr};
-  size_t init_sequence_len_{0};
+  std::vector<std::vector<uint8_t>> init_sequences_{};
 
   esp_lcd_panel_handle_t handle_{};
 };

esphome/components/ring_buffer/ring_buffer.cpp

@@ -10,8 +10,9 @@ namespace esphome::ring_buffer {
 static const char *const TAG = "ring_buffer";
 
 RingBuffer::~RingBuffer() {
-  if (this->handle_ != nullptr) {
-    vRingbufferDelete(this->handle_);
+  // create() only builds the ring buffer once storage_ is allocated
+  if (this->storage_ != nullptr) {
+    vRingbufferDelete(this->handle_());
     RAMAllocator<uint8_t> allocator;
     allocator.deallocate(this->storage_, this->size_);
   }
@@ -31,7 +32,12 @@ std::unique_ptr<RingBuffer> RingBuffer::create(size_t len, MemoryPreference pref
     return nullptr;
   }
 
-  rb->handle_ = xRingbufferCreateStatic(rb->size_, RINGBUF_TYPE_BYTEBUF, rb->storage_, &rb->structure_);
+  // handle_() assumes the returned handle is &structure_; NULL means the arguments were rejected
+  if (xRingbufferCreateStatic(rb->size_, RINGBUF_TYPE_BYTEBUF, rb->storage_, &rb->structure_) != rb->handle_()) {
+    allocator.deallocate(rb->storage_, rb->size_);
+    rb->storage_ = nullptr;
+    return nullptr;
+  }
   ESP_LOGD(TAG, "Created ring buffer with size %u", len);
 
   return rb;
@@ -39,16 +45,16 @@ std::unique_ptr<RingBuffer> RingBuffer::create(size_t len, MemoryPreference pref
 
 void *RingBuffer::receive_acquire(size_t &length, size_t max_length, TickType_t ticks_to_wait) {
   length = 0;
-  void *buffer_data = xRingbufferReceiveUpTo(this->handle_, &length, ticks_to_wait, max_length);
+  void *buffer_data = xRingbufferReceiveUpTo(this->handle_(), &length, ticks_to_wait, max_length);
   return buffer_data;
 }
 
-void RingBuffer::receive_release(void *item) { vRingbufferReturnItem(this->handle_, item); }
+void RingBuffer::receive_release(void *item) { vRingbufferReturnItem(this->handle_(), item); }
 
 size_t RingBuffer::read(void *data, size_t len, TickType_t ticks_to_wait) {
   size_t bytes_read = 0;
 
-  void *buffer_data = xRingbufferReceiveUpTo(this->handle_, &bytes_read, ticks_to_wait, len);
+  void *buffer_data = xRingbufferReceiveUpTo(this->handle_(), &bytes_read, ticks_to_wait, len);
 
   if (buffer_data == nullptr) {
     return 0;
@@ -56,14 +62,14 @@ size_t RingBuffer::read(void *data, size_t len, TickType_t ticks_to_wait) {
 
   std::memcpy(data, buffer_data, bytes_read);
 
-  vRingbufferReturnItem(this->handle_, buffer_data);
+  vRingbufferReturnItem(this->handle_(), buffer_data);
 
   if (bytes_read < len) {
     // Data may have wrapped around, so read a second time to receive the remainder
     size_t follow_up_bytes_read = 0;
     size_t bytes_remaining = len - bytes_read;
 
-    buffer_data = xRingbufferReceiveUpTo(this->handle_, &follow_up_bytes_read, 0, bytes_remaining);
+    buffer_data = xRingbufferReceiveUpTo(this->handle_(), &follow_up_bytes_read, 0, bytes_remaining);
 
     if (buffer_data == nullptr) {
       return bytes_read;
@@ -71,7 +77,7 @@ size_t RingBuffer::read(void *data, size_t len, TickType_t ticks_to_wait) {
 
     std::memcpy((void *) ((uint8_t *) (data) + bytes_read), buffer_data, follow_up_bytes_read);
 
-    vRingbufferReturnItem(this->handle_, buffer_data);
+    vRingbufferReturnItem(this->handle_(), buffer_data);
     bytes_read += follow_up_bytes_read;
   }
 
@@ -89,13 +95,13 @@ size_t RingBuffer::write(const void *data, size_t len) {
 
 size_t RingBuffer::write_without_replacement(const void *data, size_t len, TickType_t ticks_to_wait,
                                              bool write_partial) {
-  if (!xRingbufferSend(this->handle_, data, len, ticks_to_wait)) {
+  if (!xRingbufferSend(this->handle_(), data, len, ticks_to_wait)) {
     if (!write_partial) {
       return 0;  // Not enough space available and not allowed to write partial data
     }
     // Couldn't fit all the data, write what will fit
     size_t free = std::min(this->free(), len);
-    if (xRingbufferSend(this->handle_, data, free, 0)) {
+    if (xRingbufferSend(this->handle_(), data, free, 0)) {
       return free;
     }
     return 0;
@@ -105,11 +111,11 @@ size_t RingBuffer::write_without_replacement(const void *data, size_t len, TickT
 
 size_t RingBuffer::available() const {
   UBaseType_t ux_items_waiting = 0;
-  vRingbufferGetInfo(this->handle_, nullptr, nullptr, nullptr, nullptr, &ux_items_waiting);
+  vRingbufferGetInfo(this->handle_(), nullptr, nullptr, nullptr, nullptr, &ux_items_waiting);
   return ux_items_waiting;
 }
 
-size_t RingBuffer::free() const { return xRingbufferGetCurFreeSize(this->handle_); }
+size_t RingBuffer::free() const { return xRingbufferGetCurFreeSize(this->handle_()); }
 
 BaseType_t RingBuffer::reset() {
   // Discards all the available data
@@ -119,15 +125,15 @@ BaseType_t RingBuffer::reset() {
 bool RingBuffer::discard_bytes_(size_t discard_bytes) {
   size_t bytes_read = 0;
 
-  void *buffer_data = xRingbufferReceiveUpTo(this->handle_, &bytes_read, 0, discard_bytes);
+  void *buffer_data = xRingbufferReceiveUpTo(this->handle_(), &bytes_read, 0, discard_bytes);
   if (buffer_data != nullptr)
-    vRingbufferReturnItem(this->handle_, buffer_data);
+    vRingbufferReturnItem(this->handle_(), buffer_data);
 
   if (bytes_read < discard_bytes) {
     size_t wrapped_bytes_read = 0;
-    buffer_data = xRingbufferReceiveUpTo(this->handle_, &wrapped_bytes_read, 0, discard_bytes - bytes_read);
+    buffer_data = xRingbufferReceiveUpTo(this->handle_(), &wrapped_bytes_read, 0, discard_bytes - bytes_read);
     if (buffer_data != nullptr) {
-      vRingbufferReturnItem(this->handle_, buffer_data);
+      vRingbufferReturnItem(this->handle_(), buffer_data);
       bytes_read += wrapped_bytes_read;
     }
   }

esphome/components/ring_buffer/ring_buffer.h

@@ -115,7 +115,9 @@ class RingBuffer {
   /// @return True if all bytes were successfully discarded, false otherwise
   bool discard_bytes_(size_t discard_bytes);
 
-  RingbufHandle_t handle_{nullptr};
+  // xRingbufferCreateStatic() returns the static structure itself as the handle
+  RingbufHandle_t handle_() const { return const_cast<StaticRingbuffer_t *>(&this->structure_); }
+
   StaticRingbuffer_t structure_;
   uint8_t *storage_{nullptr};
   size_t size_{0};

esphome/components/rtttl/rtttl.h

@@ -82,14 +82,14 @@ class Rtttl final : public Component {
   uint16_t note_duration_{0};
   /// The duration of a whole note in milliseconds.
   uint16_t wholenote_duration_;
+  /// The current state of the RTTTL player.
+  State state_{State::STOPPED};
   /// The time in milliseconds since microcontroller boot when the last note was started.
   uint32_t last_note_start_time_;
   /// The frequency of the current note in Hz.
   uint32_t output_freq_{0};
   /// The gain of the output.
   float gain_{0.6f};
-  /// The current state of the RTTTL player.
-  State state_{State::STOPPED};
 
 #ifdef USE_OUTPUT
   /// The output to write the sound to.

esphome/components/sendspin/sendspin_hub.h

@@ -308,6 +308,9 @@ class SendspinHub final : public Component,
   CallbackManager<void(const sendspin::GroupUpdateObject &)> group_update_callbacks_{};
 
   bool task_stack_in_psram_{false};
+#ifdef USE_MDNS_SUPPORTS_ENABLE_DISABLE
+  bool mdns_advertised_{false};  // Last state requested from mdns
+#endif
 
   // Requested client state, applied from loop(). Empty until the switch restores its state.
   std::optional<bool> enabled_;
@@ -320,7 +323,6 @@ class SendspinHub final : public Component,
 
 #ifdef USE_MDNS_SUPPORTS_ENABLE_DISABLE
   mdns::MDNSComponent *mdns_{nullptr};
-  bool mdns_advertised_{false};  // Last state requested from mdns
 #endif
 };
 

esphome/components/speaker/speaker.h

@@ -127,9 +127,9 @@ class Speaker {
 #endif
 
   State state_{STATE_STOPPED};
+  bool mute_state_{false};
   audio::AudioStreamInfo audio_stream_info_;
   float volume_{1.0f};
-  bool mute_state_{false};
 
 #ifdef USE_AUDIO_DAC
   audio_dac::AudioDac *audio_dac_{nullptr};

esphome/components/template/number/template_number.h

@@ -25,8 +25,8 @@ class TemplateNumber final : public number::Number, public PollingComponent {
  protected:
   void control(float value) override;
   bool optimistic_{false};
-  float initial_value_{NAN};
   bool restore_value_{false};
+  float initial_value_{NAN};
   Trigger<float> set_trigger_;
   TemplateLambda<float> f_;
 

esphome/components/voice_assistant/voice_assistant.h

@@ -44,7 +44,7 @@ enum VoiceAssistantFeature : uint32_t {
   FEATURE_MULTI_CHANNEL_AUDIO = 1 << 6,
 };
 
-enum class State {
+enum class State : uint8_t {
   IDLE,
   START_MICROPHONE,
   STARTING_MICROPHONE,
@@ -96,7 +96,7 @@ struct Configuration {
 };
 
 #ifdef USE_MEDIA_PLAYER
-enum class MediaPlayerResponseState {
+enum class MediaPlayerResponseState : uint8_t {
   IDLE,
   URL_SENT,
   PLAYING,
@@ -237,6 +237,7 @@ class VoiceAssistant final : public Component {
 
   void set_state_(State state);
   void set_state_(State state, State desired_state);
+  bool start_udp_socket_();
   void signal_stop_();
   void start_playback_timeout_();
 
@@ -280,8 +281,6 @@ class VoiceAssistant final : public Component {
   Trigger<Timer> timer_updated_trigger_;
   Trigger<Timer> timer_cancelled_trigger_;
   Trigger<const std::vector<Timer> &> timer_tick_trigger_;
-  bool has_timers_{false};
-  bool timer_tick_running_{false};
 
   microphone::MicrophoneSource *mic_source_{nullptr};
   microphone::MicrophoneSource *mic_source2_{nullptr};
@@ -292,19 +291,12 @@ class VoiceAssistant final : public Component {
   size_t speaker_buffer_index_{0};
   size_t speaker_buffer_size_{0};
   size_t speaker_bytes_received_{0};
-  bool wait_for_stream_end_{false};
-  bool stream_ended_{false};
 #endif
 #ifdef USE_MEDIA_PLAYER
   media_player::MediaPlayer *media_player_{nullptr};
   std::string tts_response_url_;
-  bool started_streaming_tts_{false};
-
-  MediaPlayerResponseState media_player_response_state_{MediaPlayerResponseState::IDLE};
 #endif
 
-  bool local_output_{false};
-
   std::string conversation_id_;
 
   std::string wake_word_;
@@ -324,29 +316,37 @@ class VoiceAssistant final : public Component {
   // prolonged one can be detected and stopped; 0 means no imbalance is currently being timed.
   uint32_t audio_channel_stall_start_{0};
 
-  bool use_wake_word_;
-  uint8_t noise_suppression_level_;
-  uint8_t auto_gain_;
   float volume_multiplier_;
   uint32_t conversation_timeout_;
 
-  bool continuous_{false};
-  bool silence_detection_;
-
-  bool continue_conversation_{false};
-
-  State state_{State::IDLE};
-  State desired_state_{State::IDLE};
-
-  AudioMode audio_mode_{AUDIO_MODE_UDP};
-  bool udp_socket_running_{false};
-  bool start_udp_socket_();
-
   Configuration config_{};
 
 #ifdef USE_MICRO_WAKE_WORD
   micro_wake_word::MicroWakeWord *micro_wake_word_{nullptr};
 #endif
+
+  // 1 byte members grouped at the end so they share padding instead of each taking a word
+  State state_{State::IDLE};
+  State desired_state_{State::IDLE};
+  AudioMode audio_mode_{AUDIO_MODE_UDP};
+  bool has_timers_{false};
+  bool timer_tick_running_{false};
+#ifdef USE_SPEAKER
+  bool wait_for_stream_end_{false};
+  bool stream_ended_{false};
+#endif
+#ifdef USE_MEDIA_PLAYER
+  MediaPlayerResponseState media_player_response_state_{MediaPlayerResponseState::IDLE};
+  bool started_streaming_tts_{false};
+#endif
+  bool local_output_{false};
+  bool use_wake_word_;
+  uint8_t noise_suppression_level_;
+  uint8_t auto_gain_;
+  bool continuous_{false};
+  bool silence_detection_;
+  bool continue_conversation_{false};
+  bool udp_socket_running_{false};
 };
 
 extern VoiceAssistant *global_voice_assistant;  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)

tests/component_tests/font/config/glyph_table.yaml

@@ -0,0 +1,11 @@
+esphome:
+  name: test
+
+esp8266:
+  board: esp01_1m
+
+font:
+  - file: ../NotoSans-Regular.ttf
+    id: noto
+    size: 12
+    glyphs: "AB"

tests/component_tests/font/test_font.py

@@ -4,8 +4,10 @@ Focuses on verifying that long multi-byte (Chinese/CJK) glyph strings
 are correctly processed through the font configuration pipeline.
 """
 
+from collections.abc import Callable
 import functools
 from pathlib import Path
+import re
 from unittest.mock import MagicMock, patch
 
 import pytest
@@ -260,15 +262,12 @@ def mock_cg():
     with (
         patch("esphome.components.font.cg.add_define") as mock_define,
         patch("esphome.components.font.cg.progmem_array") as mock_progmem,
-        patch("esphome.components.font.cg.static_const_array") as mock_static,
         patch("esphome.components.font.cg.new_Pvariable") as mock_new_pvar,
     ):
         mock_progmem.return_value = MagicMock()
-        mock_static.return_value = MagicMock()
         yield {
             "add_define": mock_define,
             "progmem_array": mock_progmem,
-            "static_const_array": mock_static,
             "new_Pvariable": mock_new_pvar,
         }
 
@@ -288,13 +287,13 @@ async def test_to_code_long_latin_generates_all_glyphs(mock_cg):
     mock_cg["add_define"].assert_any_call("USE_FONT")
 
     # progmem_array receives the combined bitmap data (non-empty)
-    mock_cg["progmem_array"].assert_called_once()
-    bitmap_data = mock_cg["progmem_array"].call_args.args[1]
+    # bitmap data first, then the glyph table
+    assert mock_cg["progmem_array"].call_count == 2
+    bitmap_data = mock_cg["progmem_array"].call_args_list[0].args[1]
     assert len(bitmap_data) > 0
 
-    # static_const_array receives one entry per unique glyph
-    mock_cg["static_const_array"].assert_called_once()
-    glyph_initializer = mock_cg["static_const_array"].call_args.args[1]
+    # the glyph table receives one entry per unique glyph
+    glyph_initializer = mock_cg["progmem_array"].call_args_list[1].args[1]
     assert len(glyph_initializer) == glyph_count
 
     # new_Pvariable is called with the correct glyph count
@@ -314,7 +313,7 @@ async def test_to_code_glyph_entries_contain_expected_fields(mock_cg):
 
     await to_code(config)
 
-    glyph_initializer = mock_cg["static_const_array"].call_args.args[1]
+    glyph_initializer = mock_cg["progmem_array"].call_args_list[1].args[1]
     for entry in glyph_initializer:
         assert len(entry) == 7, f"Glyph entry should have 7 fields, got {len(entry)}"
         codepoint = entry[0]
@@ -332,6 +331,17 @@ async def test_to_code_glyphs_sorted_by_utf8(mock_cg):
 
     await to_code(config)
 
-    glyph_initializer = mock_cg["static_const_array"].call_args.args[1]
+    glyph_initializer = mock_cg["progmem_array"].call_args_list[1].args[1]
     codepoints = [entry[0] for entry in glyph_initializer]
     assert codepoints == sorted(codepoints)
+
+
+def test_glyph_table_is_progmem(
+    generate_main: Callable[[str | Path], str],
+    component_config_path: Callable[[str], Path],
+) -> None:
+    """The constexpr glyph table goes to flash, not a RAM static const array."""
+    main_cpp = generate_main(component_config_path("glyph_table.yaml"))
+
+    assert re.search(r"static constexpr font::Glyph \w+\[\] PROGMEM = ", main_cpp)
+    assert "static const font::Glyph" not in main_cpp

tests/component_tests/homeassistant/test_number.py

@@ -0,0 +1,32 @@
+"""Tests for the homeassistant number platform."""
+
+from collections.abc import Callable
+from pathlib import Path
+
+import pytest
+
+from esphome.config import read_config
+from esphome.core import CORE
+
+VALID_CONFIG = "tests/component_tests/homeassistant/test_number.yaml"
+INVALID_CONFIG = "tests/component_tests/homeassistant/test_number_invalid_domain.yaml"
+
+
+def test_number_and_input_number_entities(
+    generate_main: Callable[[str | Path], str],
+) -> None:
+    """Both number and input_number entity IDs are accepted and passed to the C++ class."""
+    main_cpp = generate_main(VALID_CONFIG)
+
+    assert 'ha_number->set_entity_id("number.some_number");' in main_cpp
+    assert 'ha_input_number->set_entity_id("input_number.some_input");' in main_cpp
+
+
+def test_number_rejects_unsupported_domain(
+    capsys: pytest.CaptureFixture[str],
+) -> None:
+    """An entity ID from another domain fails config validation."""
+    CORE.config_path = Path(INVALID_CONFIG)
+
+    assert read_config({}) is None
+    assert "is not supported by the number platform" in capsys.readouterr().out

tests/component_tests/homeassistant/test_number.yaml

@@ -0,0 +1,17 @@
+---
+esphome:
+  name: test
+
+host:
+
+logger:
+
+api:
+
+number:
+  - platform: homeassistant
+    entity_id: number.some_number
+    id: ha_number
+  - platform: homeassistant
+    entity_id: input_number.some_input
+    id: ha_input_number

tests/component_tests/homeassistant/test_number_invalid_domain.yaml

@@ -0,0 +1,17 @@
+---
+esphome:
+  name: test
+
+host:
+
+logger:
+
+api:
+
+number:
+  - platform: homeassistant
+    entity_id: number.some_number
+    id: ha_number
+  - platform: homeassistant
+    entity_id: sensor.foo
+    id: ha_other_number

tests/component_tests/lvgl/test_platforms.py

@@ -0,0 +1,14 @@
+"""LVGL rejects ESP8266 at validation time."""
+
+import pytest
+
+from esphome.components import lvgl
+from esphome.config_validation import Invalid
+from esphome.const import PlatformFramework
+from tests.component_tests.types import SetCoreConfigCallable
+
+
+def test_esp8266_is_rejected(set_core_config: SetCoreConfigCallable) -> None:
+    set_core_config(PlatformFramework.ESP8266_ARDUINO)
+    with pytest.raises(Invalid, match="not supported on ESP8266"):
+        lvgl.CONFIG_SCHEMA({})

tests/component_tests/ota/test_esphome_ota.py

@@ -560,7 +560,7 @@ def test_encryption_offer_codegen(
     own_key = encrypted and "USE_OTA_ENCRYPTION_PROVISIONED" not in defines_present
     assert ("esphome_esphomeotacomponent_id->set_noise_psk(" in main_cpp) is own_key
     # The api shares the ota's array instead of emitting the same key twice
-    assert main_cpp.count("_psk[] PROGMEM") == (1 if own_key else 0)
+    assert main_cpp.count("noise_psk[] PROGMEM") == (1 if own_key else 0)
     assert ("set_auth_password(" in main_cpp) is ("USE_OTA_PASSWORD" in defines_present)
     # The noise transport source compiles only when the define is set
     assert FILTER_SOURCE_FILES() == ([] if encrypted else ["ota_esphome_noise.cpp"])

tests/component_tests/qspi_dbi/test_init_sequence.py

@@ -1,70 +0,0 @@
-"""Tests for the qspi_dbi init sequence codegen."""
-
-from collections.abc import Callable
-from pathlib import Path
-import re
-
-_YAML = """
-esphome:
-  name: qspi-dbi-test
-esp32:
-  board: esp32-s3-devkitc-1
-  framework:
-    type: esp-idf
-psram:
-  mode: octal
-spi:
-  type: quad
-  clk_pin: 47
-  data_pins: [18, 7, 48, 5]
-display:
-  - platform: qspi_dbi
-    id: builtin
-    model: RM690B0
-    dimensions:
-      width: 450
-      height: 600
-    cs_pin: 11
-  - platform: qspi_dbi
-    id: builtin_too
-    model: RM690B0
-    dimensions:
-      width: 450
-      height: 600
-    cs_pin: 12
-  - platform: qspi_dbi
-    id: custom
-    model: CUSTOM
-    dimensions:
-      width: 536
-      height: 240
-    cs_pin: 6
-    init_sequence:
-      - [0x3A, 0x66]
-      - delay 120ms
-"""
-
-
-def test_init_sequence_is_shared_progmem_table(
-    generate_main: Callable[[str | Path], str],
-    tmp_path: Path,
-) -> None:
-    """Model and custom commands form one PROGMEM table; identical displays share it."""
-    yaml_file = tmp_path / "qspi_dbi.yaml"
-    yaml_file.write_text(_YAML)
-
-    main_cpp = generate_main(yaml_file)
-
-    calls = {
-        m[0]: (m[1], int(m[2]))
-        for m in re.findall(r"(\w+)->set_init_sequence\((\w+), (\d+)\);", main_cpp)
-    }
-    assert calls["builtin"] == calls["builtin_too"]
-    assert calls["custom"][0] != calls["builtin"][0]
-    custom = re.search(
-        rf"static constexpr uint8_t {calls['custom'][0]}\[\] PROGMEM = \{{([^;]*)\}};",
-        main_cpp,
-    )
-    assert custom is not None
-    assert custom.group(1).replace(" ", "") == "58,1,102,120,255"
-    assert "add_init_sequence" not in main_cpp

tests/components/homeassistant/common.yaml

@@ -71,6 +71,9 @@ number:
   - platform: homeassistant
     entity_id: number.hello_world
     id: ha_hello_world_number
+  - platform: homeassistant
+    entity_id: input_number.hello_world
+    id: ha_hello_world_input_number
 
 sensor:
   - platform: homeassistant

tests/integration/fixtures/api_homeassistant.yaml

@@ -21,6 +21,12 @@ api:
         - number.set:
             id: ha_number
             value: 42.5
+        - number.set:
+            id: ha_real_number
+            value: 12.5
+        - number.set:
+            id: ha_real_input_number
+            value: 7
         - switch.turn_on: ha_switch
         - switch.turn_off: ha_switch
         - logger.log: "=== All tests completed ==="
@@ -129,6 +135,13 @@ text_sensor:
 
 # Number component for testing HA number control
 number:
+  # Real homeassistant numbers: the action used depends on the entity domain
+  - platform: homeassistant
+    id: ha_real_number
+    entity_id: number.test_real_number
+  - platform: homeassistant
+    id: ha_real_input_number
+    entity_id: input_number.test_real_input_number
   - platform: template
     name: "HA Controlled Number"
     id: ha_number

tests/integration/test_api_homeassistant.py

@@ -86,6 +86,15 @@ async def test_api_homeassistant(
         "nonexistent.action_for_error_test": loop.create_future(),  # error_test_call
     }
 
+    # Futures keyed by (service, entity_id) for the real homeassistant numbers
+    ha_real_number_futures = {
+        ("number.set_value", "number.test_real_number"): loop.create_future(),
+        (
+            "input_number.set_value",
+            "input_number.test_real_input_number",
+        ): loop.create_future(),
+    }
+
     # Future for error message test
     action_error_received_future = loop.create_future()
 
@@ -102,6 +111,10 @@ async def test_api_homeassistant(
             if not future.done():
                 future.set_result(service_call)
 
+        key = (service_call.service, service_call.data.get("entity_id"))
+        if key in ha_real_number_futures and not ha_real_number_futures[key].done():
+            ha_real_number_futures[key].set_result(service_call)
+
         # Immediately respond to the error test call so the test can proceed
         # This needs to happen synchronously so ESPHome receives the response
         # before logging "=== All tests completed ==="
@@ -201,6 +214,16 @@ async def test_api_homeassistant(
         # Empty state with valid entity should work (use different entity to not interfere with test)
         client.send_home_assistant_state("sensor.edge_case_empty_state", "", "")
 
+        # The real homeassistant numbers reject values outside min/max, which
+        # default to 0 until Home Assistant provides them
+        for entity in (
+            "number.test_real_number",
+            "input_number.test_real_input_number",
+        ):
+            client.send_home_assistant_state(entity, "min", "0")
+            client.send_home_assistant_state(entity, "max", "100")
+            client.send_home_assistant_state(entity, "step", "0.5")
+
         # List entities and services
         _, services = await client.list_entities_services()
 
@@ -334,6 +357,21 @@ async def test_api_homeassistant(
             # The value might be formatted with trailing zeros
             assert float(number_call.data["value"]) == 42.5
 
+            # 7b. Real homeassistant numbers pick the action from the entity domain
+            real_number_call = await asyncio.wait_for(
+                ha_real_number_futures[("number.set_value", "number.test_real_number")],
+                timeout=2.0,
+            )
+            assert float(real_number_call.data["value"]) == 12.5
+
+            real_input_number_call = await asyncio.wait_for(
+                ha_real_number_futures[
+                    ("input_number.set_value", "input_number.test_real_input_number")
+                ],
+                timeout=2.0,
+            )
+            assert float(real_input_number_call.data["value"]) == 7
+
             # 8. HA Switch service calls
             switch_on_call = await asyncio.wait_for(
                 service_call_futures["switch.turn_on"], timeout=2.0