Merge remote-tracking branch 'origin/dev' into web-server-offline-hint

[ci] Refresh integration test durations (#18944 )
[core] Document C++ conventions in AGENTS.md that reviews keep catching (#18941 )
2026-09-04 12:06:01 +00:00 · 2026-09-02 11:34:21 +02:00 · 2026-09-02 09:32:47 +00:00 · 2026-09-02 11:17:22 +02:00 · 2026-09-01 21:36:49 -04:00 · 2026-09-01 21:36:04 -04:00
211 changed files with 5533 additions and 745 deletions
@@ -92,6 +92,7 @@ jobs:
    outputs:
      core-ci: ${{ steps.determine.outputs.core-ci }}
      integration-tests: ${{ steps.determine.outputs.integration-tests }}
+      integration-run-all: ${{ steps.determine.outputs.integration-run-all }}
      integration-test-buckets: ${{ steps.determine.outputs.integration-test-buckets }}
      clang-tidy: ${{ steps.determine.outputs.clang-tidy }}
      clang-tidy-mode: ${{ steps.determine.outputs.clang-tidy-mode }}
@@ -152,6 +153,9 @@ jobs:
          # Extract individual fields
          echo "core-ci=$(echo "$output" | jq -r '.core_ci')" >> $GITHUB_OUTPUT
          echo "integration-tests=$(echo "$output" | jq -r '.integration_tests')" >> $GITHUB_OUTPUT
+          # A missing key must fail here, not silently disable the junit upload
+          run_all=$(echo "$output" | jq -r 'if has("integration_run_all") then .integration_run_all else error("integration_run_all missing") end')
+          echo "integration-run-all=${run_all}" >> $GITHUB_OUTPUT
          echo "integration-test-buckets=$(echo "$output" | jq -c '.integration_test_buckets')" >> $GITHUB_OUTPUT
          echo "clang-tidy=$(echo "$output" | jq -r '.clang_tidy')" >> $GITHUB_OUTPUT
          echo "clang-tidy-mode=$(echo "$output" | jq -r '.clang_tidy_mode')" >> $GITHUB_OUTPUT
@@ -427,8 +431,25 @@ jobs:
        run: |
          . venv/bin/activate
          mapfile -t test_files < <(echo "$BUCKET_TESTS" | jq -r '.[]')
+          if [ "${#test_files[@]}" -eq 0 ]; then
+            echo "::error::Empty integration test bucket; pytest would collect the whole tree"
+            exit 1
+          fi
          echo "Bucket ${{ matrix.bucket.name }}: running ${#test_files[@]} integration tests"
-          pytest -vv --no-cov --tb=native --durations=30 -n auto "${test_files[@]}"
+          pytest -vv --no-cov --tb=native --durations=30 -n auto --dist worksteal \
+            --junitxml=junit-integration.xml "${test_files[@]}"
+      - name: Upload junit timings
+        # Consumed by sync-integration-durations.yml through
+        # script/update_integration_test_durations.py; only full matrix dev
+        # runs produce usable data.
+        if: github.ref == 'refs/heads/dev' && needs.determine-jobs.outputs.integration-run-all == 'true'
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        with:
+          name: junit-integration-${{ strategy.job-index }}
+          path: junit-integration.xml
+          if-no-files-found: error
+          # A full cron period of margin for the weekly refresh
+          retention-days: 14
      - name: Print ccache statistics
        # esphome stores the PlatformIO ccache under the machine-global cache
        # dir (see _ccache_env() in esphome/platformio/toolchain.py).
@@ -56,7 +56,7 @@ jobs:

      # Initializes the CodeQL tools for scanning.
      - name: Initialize CodeQL
-        uses: github/codeql-action/init@db488ddef3bf6cb639b32c2e9a7c0a7ea8271d28 # v4.37.8
+        uses: github/codeql-action/init@cdf488f595d80d6e07e03d4674febd5ab45fa938 # v4.37.9
        with:
          languages: ${{ matrix.language }}
          build-mode: ${{ matrix.build-mode }}
@@ -84,6 +84,6 @@ jobs:
          exit 1

      - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@db488ddef3bf6cb639b32c2e9a7c0a7ea8271d28 # v4.37.8
+        uses: github/codeql-action/analyze@cdf488f595d80d6e07e03d4674febd5ab45fa938 # v4.37.9
        with:
          category: "/language:${{matrix.language}}"
@@ -0,0 +1,98 @@
+---
+name: Refresh integration test durations
+
+on:
+  workflow_dispatch:
+  schedule:
+    - cron: "45 5 * * 1"
+
+# Repo writes (branch push, PR open) happen via the App token minted below,
+# so the workflow's GITHUB_TOKEN does not need any write scopes.
+permissions:
+  contents: read
+  actions: read  # gh api / gh run download for the CI junit artifacts
+
+jobs:
+  sync:
+    name: Refresh integration test durations
+    runs-on: ubuntu-latest
+    if: github.repository == 'esphome/esphome'
+    steps:
+      - name: Generate a token
+        id: generate-token
+        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
+        with:
+          client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
+          private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
+          permission-contents: write       # push the sync branch
+          permission-pull-requests: write  # open or refresh the sync PR
+
+      - name: Checkout
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+
+      - name: Setup Python
+        uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97 # v7.0.0
+        with:
+          python-version: "3.13"
+
+      - name: Refresh from the newest usable dev run
+        env:
+          GH_TOKEN: ${{ github.token }}
+        run: |
+          # Only full matrix dev runs upload junit-integration-* artifacts
+          # (see the integration-tests job); the merge script re-checks
+          # coverage regardless.
+          # Newest-first candidates via their bucket-0 artifact. Fork PRs run
+          # their own ci.yml, so name and branch are spoofable; require
+          # same-repo. Assignment failures trip set -e and fail loudly.
+          candidates=$(
+            gh api "repos/${GITHUB_REPOSITORY}/actions/artifacts?name=junit-integration-0&per_page=100" \
+              --jq '.artifacts[] | select(.expired | not) | .workflow_run
+                    | select(.head_branch == "dev" and .head_repository_id != null
+                             and .head_repository_id == .repository_id)
+                    | .id'
+          )
+          # Green runs first, then the rest newest first; a run missing a
+          # bucket fails the coverage check and the next one is tried
+          green=""
+          rest=""
+          for id in ${candidates}; do
+            conclusion=$(gh api "repos/${GITHUB_REPOSITORY}/actions/runs/${id}" --jq '.conclusion // ""')
+            if [ "${conclusion}" = "success" ]; then
+              green="${green} ${id}"
+            elif [ -n "${conclusion}" ]; then
+              rest="${rest} ${id}"
+            fi
+          done
+          # helpers.py imports colorama; the script needs nothing else
+          pip install colorama
+          for id in ${green} ${rest}; do
+            rm -rf /tmp/junit
+            if ! gh run download "${id}" --repo "${GITHUB_REPOSITORY}" -p "junit-integration-*" -D /tmp/junit; then
+              echo "::warning::Could not download artifacts for run ${id}; trying the next"
+              continue
+            fi
+            status=0
+            python script/update_integration_test_durations.py /tmp/junit || status=$?
+            if [ "${status}" -eq 0 ]; then
+              echo "Refreshed from run ${id}"
+              exit 0
+            fi
+            # Only EXIT_LOW_COVERAGE (3) from the script advances to the next run
+            [ "${status}" -eq 3 ] || exit 1
+            echo "::warning::Run ${id} covers too few test files; trying the next"
+          done
+          echo "::error::No dev CI run with usable junit artifacts in range; the feed is starved"
+          exit 1
+
+      - name: Commit changes
+        uses: peter-evans/create-pull-request@5f6978faf089d4d20b00c7766989d076bb2fc7f1 # v8.1.1
+        with:
+          commit-message: "[ci] Refresh integration test durations"
+          committer: esphome[bot] <115708604+esphome[bot]@users.noreply.github.com>
+          author: esphome[bot] <115708604+esphome[bot]@users.noreply.github.com>
+          branch: sync/integration-durations
+          delete-branch: true
+          title: "[ci] Refresh integration test durations"
+          body-path: .github/PULL_REQUEST_TEMPLATE.md
+          token: ${{ steps.generate-token.outputs.token }}
@@ -44,6 +44,16 @@ This document provides essential context for AI models interacting with this pro

 ## 4. Coding Conventions & Style Guide

+**Read the developer documentation before writing a component.** https://developers.esphome.io covers the
+component lifecycle, the main loop, and the reasoning behind the rules below in far more depth than this
+file does, and it is the authority when they disagree. The most useful starting points:
+
+*   https://developers.esphome.io/architecture/components/ - component lifecycle, `setup()`, `loop()`,
+    setup priorities, and how a component is registered.
+*   https://developers.esphome.io/architecture/components/advanced/ - choosing between `loop()`,
+    `set_interval`, `set_timeout` and `defer`; waking the loop from another thread; the RAM cost of each.
+*   https://developers.esphome.io/contributing/code/ - contribution rules, public API and breaking changes.
+
 *   **Formatting:**
    *   **Python:** Uses `ruff` and `flake8` for linting and formatting. Configuration is in `pyproject.toml`.
    *   **C++:** Uses `clang-format` for formatting. Configuration is in `.clang-format`.
@@ -142,6 +152,47 @@ This document provides essential context for AI models interacting with this pro
    *   **Indentation:** Use spaces (two per indentation level), not tabs
    *   **Type aliases:** Prefer `using type_t = int;` over `typedef int type_t;`
    *   **Line length:** Wrap lines at no more than 120 characters
+    *   **Timing in `loop()`:** Never call `millis()` in a `loop()` body. The current tick's timestamp is
+        already cached - use `App.get_loop_component_start_time()` (from `esphome/core/application.h`).
+        Only reach for `millis()` when you genuinely need sub-tick resolution inside a long operation.
+    *   **The main loop runs every 16 ms.** A rate-limit gate shorter than that does nothing: the check
+        passes on essentially every pass of the loop, so it costs a comparison and buys nothing. Pick an
+        interval comfortably coarser than 16 ms, or drop the gate entirely and accept running every loop.
+        ```cpp
+        // Bad - a 10ms gate against a 16ms loop never holds anything back
+        static constexpr uint32_t POLL_INTERVAL_MS = 10;
+        const uint32_t now = millis();
+        if (now - this->last_poll_ < POLL_INTERVAL_MS)
+          return;
+        this->last_poll_ = now;
+        ```
+        ```cpp
+        // Good - an interval that actually rate limits, off the cached timestamp
+        static constexpr uint32_t POLL_INTERVAL_MS = 100;
+        const uint32_t now = App.get_loop_component_start_time();
+        if (now - this->last_poll_ < POLL_INTERVAL_MS)
+          return;
+        this->last_poll_ = now;
+        ```
+        Pick the primitive by cadence: under 250 ms use a gated `loop()`; 500 ms and above use
+        `set_interval`. Full reasoning, including why `set_interval` costs more below 500 ms:
+        https://developers.esphome.io/architecture/components/advanced/#quick-rule-of-thumb
+    *   **Don't override a default with the same value:** if a base class method already returns what you
+        want, do not override it. `Component::get_setup_priority()` returns `setup_priority::DATA`, so a
+        component that wants `DATA` should simply leave it alone.
+        ```cpp
+        // Bad - this is exactly what the base class already does
+        float get_setup_priority() const override { return setup_priority::DATA; }
+        ```
+    *   **Logging string literals:** wrap literals passed as `%s` arguments in `LOG_STR_LITERAL()` so they
+        can be stored in flash rather than RAM.
+        ```cpp
+        // Bad
+        ESP_LOGV(TAG, "Key %u %s", key, pressed ? "pressed" : "released");
+
+        // Good
+        ESP_LOGV(TAG, "Key %u %s", key, pressed ? LOG_STR_LITERAL("pressed") : LOG_STR_LITERAL("released"));
+        ```
    *   **Constructor parameters vs setters:** Component properties that are both **required** and **invariant**
        (never change after construction) should be constructor parameters rather than set via setter methods.
        This makes the dependency explicit and prevents use of the object in an incompletely-initialized state.
@@ -562,6 +613,33 @@ This document provides essential context for AI models interacting with this pro
           Use `cg.add_define("MAX_SERVICES", count)` to set the size from Python configuration.
           Like `std::array` but with vector-like API (`push_back()`, `size()`) and no STL reallocation code.

+           **Listener and child-entity registration lists are the most common case, and the most commonly
+           missed.** A `register_*()` method called once per child at code generation time has a count that
+           is known at compile time, so it should never be a `std::vector`. Use `cg.slot_counter()`: it
+           returns a function that each consumer calls once per slot it will occupy, and after every
+           `to_code` has run it emits the define with the final count. When nothing registers, no define is
+           emitted and the storage plus its registration method compile out entirely.
+           ```python
+           # hub component's __init__.py
+           _request_listener_slot = cg.slot_counter("MY_COMPONENT_LISTENER_COUNT")
+
+
+           async def register_listener(hub: MockObj, var: MockObj) -> None:
+               _request_listener_slot()
+               cg.add(hub.register_listener(var))
+           ```
+           ```cpp
+           #ifdef MY_COMPONENT_LISTENER_COUNT
+             void register_listener(MyComponentListener *listener);
+           #endif
+            protected:
+           #ifdef MY_COMPONENT_LISTENER_COUNT
+             StaticVector<MyComponentListener *, MY_COMPONENT_LISTENER_COUNT> listeners_;
+           #endif
+           ```
+           Request slots from `to_code`, not from a job that runs after `CoroPriority.FINAL` - a late
+           request raises rather than silently undercounting.
+
        3. **Runtime-known sizes:** Use `FixedVector` from `esphome/core/helpers.h` when the size is only known at runtime initialization.
           ```cpp
           // Bad - generates STL realloc code (_M_realloc_insert)
@@ -599,9 +677,25 @@ This document provides essential context for AI models interacting with this pro
           ```
           Linear search on small datasets (1-16 elements) is often faster than hashing/tree overhead, but this depends on lookup frequency and access patterns. For frequent lookups in hot code paths, the O(1) vs O(n) complexity difference may still matter even for small datasets. `std::vector` with simple structs is usually fine—it's the heavy containers (`map`, `set`, `unordered_map`) that should be avoided for small datasets unless profiling shows otherwise.

-        5. **Avoid `std::deque`:** It allocates in 512-byte blocks regardless of element size, guaranteeing at least 512 bytes of RAM usage immediately. This is a major source of crashes on memory-constrained devices.
+        5. **Strings set once from configuration:** Use `StringRef` (`esphome/core/string_ref.h`) rather than
+           `std::string`. Code generation passes a string literal that lives in flash for the life of the
+           program, so storing a `std::string` copies it onto the heap for nothing. `StringRef` is a
+           non-owning pointer plus length; it does not copy, and it must only ever refer to storage that
+           outlives it (a string literal, or a buffer owned elsewhere).
+           ```cpp
+           // Bad - heap copy of a literal that is already in flash
+           void set_keys(std::string keys) { this->keys_ = std::move(keys); }
+           std::string keys_;
+           ```
+           ```cpp
+           // Good - no allocation
+           void set_keys(const char *keys) { this->keys_ = StringRef(keys); }
+           StringRef keys_;
+           ```

-        6. **Detection:** Look for these patterns in compiler output:
+        6. **Avoid `std::deque`:** It allocates in 512-byte blocks regardless of element size, guaranteeing at least 512 bytes of RAM usage immediately. This is a major source of crashes on memory-constrained devices.
+
+        7. **Detection:** Look for these patterns in compiler output:
           - Large code sections with STL symbols (vector, map, set)
           - `alloc`, `realloc`, `dealloc` in symbol names
           - `_M_realloc_insert`, `_M_default_append` (vector reallocation)
@@ -131,6 +131,7 @@ esphome/components/cst816/* @clydebarrow
 esphome/components/cst9220/* @clydebarrow
 esphome/components/ct_clamp/* @jesserockz
 esphome/components/current_based/* @djwmarcx
+esphome/components/d01/* @ch604
 esphome/components/dac7678/* @NickB1
 esphome/components/daikin_arc/* @MagicBear
 esphome/components/daikin_brc/* @hagak
@@ -148,6 +149,7 @@ esphome/components/display_menu_base/* @numo68
 esphome/components/dlms_meter/* @latonita @PolarGoose @SimonFischer04 @Tomer27cz
 esphome/components/dps310/* @kbx81
 esphome/components/ds1307/* @badbadc0ffee
+esphome/components/ds1603l/* @JakeLC15
 esphome/components/ds2484/* @mrk-its
 esphome/components/ds248x/* @tomwellnitz
 esphome/components/dsmr/* @glmnet @PolarGoose
@@ -23,7 +23,8 @@ For this repository there are two trusted inputs by design:
 1. **The configuration.** Anyone who can supply or edit a YAML config is trusted
   (see below).
 2. **Authenticated peers of a running device** — clients holding the device's
-   API encryption key / password, OTA password, or web server credentials.
+   API/OTA encryption key, API password, OTA password, or web server
+   credentials.

 The security boundary is therefore **unauthenticated network traffic vs. those
 trusted inputs.** A bug that lets an unauthenticated attacker cross it is a
@@ -76,8 +77,8 @@ These *are* security bugs in this repo, and we want to hear about them privately
  captive portal, etc.) **without** valid credentials.
 - Authentication or encryption bypass on the device — reaching API calls, OTA
  updates, or the web server without the configured key/password.
- Flaws that weaken the device's API encryption (Noise), OTA, or web server auth
-  below their documented guarantees.
+- Flaws that weaken the device's API or OTA encryption (Noise), OTA auth, or
+  web server auth below their documented guarantees.

 ## The web server is an open HTTP API by design

@@ -121,6 +122,37 @@ and any memory-safety or protocol bug in the server reachable without credential
 This section documents the current design and scope; it is not a judgment that the
 design is optimal or that it will not change.

+## OTA update encryption
+
+The `esphome` OTA platform optionally encrypts updates with the same Noise
+`NNpsk0` pattern the native API uses; one key protects the device. With an
+`encryption:` block configured the guarantees are: the firmware image is
+confidential in transit, the uploader is authenticated by the pre-shared key,
+and the plaintext negotiation preceding the handshake is bound into the
+handshake prologue, so stripping or tampering with it fails the first MAC.
+Both ends fail closed with no override: a device built with a key refuses
+plaintext uploads, and the CLI refuses to send plaintext when a key is
+configured.
+
+Defeating any of that without the key is in scope: a keyed device accepting a
+plaintext or downgraded upload, getting past the MAC, or recovering image
+contents from captured traffic.
+
+The following are **not** vulnerabilities, by design:
+
+- Plaintext OTA on a device with no `encryption:` block. That is the
+  documented default, authenticated (if at all) by the OTA password.
+- The enablement window: turning encryption on takes one last upload of the
+  encryption-enabled firmware over the existing plaintext channel, with the
+  pre-existing plaintext exposure.
+- The web OTA `/update` endpoint alongside encryption. The `web_server`
+  component keeps it always reachable, and `captive_portal:` auto-loads it
+  for the fallback AP window; validation warns about both combinations, and
+  the operator keeps the recovery path.
+- CLI retry behavior on transport or MAC failures; every attempt renegotiates
+  a fresh handshake with fresh ephemerals, so retrying does not weaken
+  authentication.
+
 ## Explicitly out of scope

 - Local attackers who already have shell access on the host that runs `esphome`.
@@ -1,5 +1,6 @@
 #!/usr/bin/env python3
 import argparse
+import os
 import re

 CHANNEL_DEV = "dev"
@@ -64,7 +65,10 @@ def main():

    suffix = f"-{args.suffix}" if args.suffix else ""

-    image_name = f"esphome/esphome{suffix}"
+    repository = (
+        (os.environ.get("GITHUB_REPOSITORY") or "esphome/esphome").strip().lower()
+    )
+    image_name = f"{repository}{suffix}"

    print(f"channel={channel}")

@@ -26,7 +26,9 @@ from esphome.const import (
    CONF_DEASSERT_RTS_DTR,
    CONF_DISABLED,
    CONF_DISCOVER_IP,
+    CONF_ENCRYPTION,
    CONF_ESPHOME,
+    CONF_KEY,
    CONF_LEVEL,
    CONF_LOG,
    CONF_LOG_TOPIC,
@@ -1336,6 +1338,19 @@ def _upload_via_native_api(

    remote_port = int(ota_conf[CONF_PORT])
    password = ota_conf.get(CONF_PASSWORD)
+    # Fail closed: an encryption block whose key did not resolve must never
+    # fall back to a plaintext upload
+    noise_psk = None
+    if (encryption_conf := ota_conf.get(CONF_ENCRYPTION)) is not None:
+        noise_psk = encryption_conf.get(CONF_KEY)
+        if not noise_psk:
+            raise EsphomeError(
+                "OTA encryption is configured but no key was resolved; "
+                "set the key under 'ota: encryption:' or 'api: encryption:'"
+            )
+        # Ensure the key is a string, as required by the underlying OTA implementation.
+        # It arrives here as a SensitiveStr which aioesphomeapi rejects.
+        noise_psk = str(noise_psk)

    def check_partition_access(option_string: str) -> None:
        if not ota_conf.get("allow_partition_access"):
@@ -1366,7 +1381,9 @@ def _upload_via_native_api(
    if ota_type == espota2.OTA_TYPE_UPDATE_BOOTLOADER:
        _validate_bootloader_binary(binary)

-    return espota2.run_ota(network_devices, remote_port, password, binary, ota_type)
+    return espota2.run_ota(
+        network_devices, remote_port, password, binary, ota_type, noise_psk
+    )


 def _upload_via_web_server(
@@ -1375,6 +1392,16 @@ def _upload_via_web_server(
    from esphome import web_server_ota
    from esphome.web_server_helpers import get_web_server_connection

+    if any(
+        ota_item.get(CONF_PLATFORM) == CONF_ESPHOME
+        and ota_item.get(CONF_ENCRYPTION) is not None
+        for ota_item in config.get(CONF_OTA, [])
+    ):
+        _LOGGER.warning(
+            "This config has OTA encryption, but the web_server OTA path sends "
+            "the image over plaintext HTTP; use the esphome OTA platform to "
+            "keep it confidential"
+        )
    remote_port, username, password = get_web_server_connection(config)
    return web_server_ota.run_ota(
        network_devices, remote_port, username, password, binary
@@ -13,6 +13,7 @@ from esphome.components.esp32 import (
    VARIANT_ESP32P4,
    VARIANT_ESP32S2,
    VARIANT_ESP32S3,
+    VARIANT_ESP32S31,
    get_esp32_variant,
 )
 import esphome.config_validation as cv
@@ -156,6 +157,17 @@ ESP32_VARIANT_ADC1_PIN_TO_CHANNEL = {
        9: adc_channel_t.ADC_CHANNEL_8,
        10: adc_channel_t.ADC_CHANNEL_9,
    },
+    # https://github.com/espressif/esp-idf/blob/master/components/soc/esp32s31/include/soc/adc_channel.h
+    VARIANT_ESP32S31: {
+        42: adc_channel_t.ADC_CHANNEL_0,
+        43: adc_channel_t.ADC_CHANNEL_1,
+        44: adc_channel_t.ADC_CHANNEL_2,
+        45: adc_channel_t.ADC_CHANNEL_3,
+        46: adc_channel_t.ADC_CHANNEL_4,
+        47: adc_channel_t.ADC_CHANNEL_5,
+        48: adc_channel_t.ADC_CHANNEL_6,
+        49: adc_channel_t.ADC_CHANNEL_7,
+    },
 }

 # pin to adc2 channel mapping
@@ -225,6 +237,17 @@ ESP32_VARIANT_ADC2_PIN_TO_CHANNEL = {
        19: adc_channel_t.ADC_CHANNEL_8,
        20: adc_channel_t.ADC_CHANNEL_9,
    },
+    # https://github.com/espressif/esp-idf/blob/master/components/soc/esp32s31/include/soc/adc_channel.h
+    VARIANT_ESP32S31: {
+        50: adc_channel_t.ADC_CHANNEL_0,
+        51: adc_channel_t.ADC_CHANNEL_1,
+        52: adc_channel_t.ADC_CHANNEL_2,
+        53: adc_channel_t.ADC_CHANNEL_3,
+        54: adc_channel_t.ADC_CHANNEL_4,
+        55: adc_channel_t.ADC_CHANNEL_5,
+        56: adc_channel_t.ADC_CHANNEL_6,
+        57: adc_channel_t.ADC_CHANNEL_7,
+    },
 }


@@ -74,9 +74,7 @@ void ADCSensor::setup() {
  if (this->calibration_handle_ == nullptr) {
    adc_cali_handle_t handle = nullptr;

-#if USE_ESP32_VARIANT_ESP32C3 || USE_ESP32_VARIANT_ESP32C5 || USE_ESP32_VARIANT_ESP32C6 || \
-    USE_ESP32_VARIANT_ESP32C61 || USE_ESP32_VARIANT_ESP32H2 || USE_ESP32_VARIANT_ESP32P4 || USE_ESP32_VARIANT_ESP32S3
-    // RISC-V variants (except C2) and S3 use curve fitting calibration
+#if defined(ADC_CALI_SCHEME_CURVE_FITTING_SUPPORTED)
    adc_cali_curve_fitting_config_t cali_config = {};  // Zero initialize first
 #if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 3, 0)
    cali_config.chan = this->channel_;
@@ -94,7 +92,7 @@ void ADCSensor::setup() {
      ESP_LOGW(TAG, "Curve fitting calibration failed with error %d, will use uncalibrated readings", err);
      this->setup_flags_.calibration_complete = false;
    }
-#else  // ESP32, ESP32-S2, and ESP32-C2 use line fitting calibration
+#elif defined(ADC_CALI_SCHEME_LINE_FITTING_SUPPORTED)
    adc_cali_line_fitting_config_t cali_config = {
      .unit_id = this->adc_unit_,
      .atten = this->attenuation_,
@@ -112,7 +110,11 @@ void ADCSensor::setup() {
      ESP_LOGW(TAG, "Line fitting calibration failed with error %d, will use uncalibrated readings", err);
      this->setup_flags_.calibration_complete = false;
    }
-#endif  // ESP32C3 || ESP32C5 || ESP32C6 || ESP32C61 || ESP32H2 || ESP32P4 || ESP32S3
+#else   // No calibration scheme available
+    (void) handle;
+    ESP_LOGD(TAG, "No calibration scheme for this variant, readings are uncalibrated");
+    this->setup_flags_.calibration_complete = false;
+#endif
  }

  this->setup_flags_.init_complete = true;
@@ -121,23 +123,28 @@ void ADCSensor::setup() {
 void ADCSensor::dump_config() {
  LOG_SENSOR("", "ADC Sensor", this);
  LOG_PIN("  Pin: ", this->pin_);
-  ESP_LOGCONFIG(
-      TAG,
-      "  Channel:       %d\n"
-      "  Unit:          %s\n"
-      "  Attenuation:   %s\n"
-      "  Samples:       %i\n"
-      "  Sampling mode: %s\n"
-      "  Setup Status:\n"
-      "    Handle Init:  %s\n"
-      "    Config:       %s\n"
-      "    Calibration:  %s\n"
-      "    Overall Init: %s",
-      this->channel_, LOG_STR_ARG(adc_unit_to_str(this->adc_unit_)),
-      this->autorange_ ? "Auto" : LOG_STR_ARG(attenuation_to_str(this->attenuation_)), this->sample_count_,
-      LOG_STR_ARG(sampling_mode_to_str(this->sampling_mode_)),
-      this->setup_flags_.handle_init_complete ? "OK" : "FAILED", this->setup_flags_.config_complete ? "OK" : "FAILED",
-      this->setup_flags_.calibration_complete ? "OK" : "FAILED", this->setup_flags_.init_complete ? "OK" : "FAILED");
+#if defined(ADC_CALI_SCHEME_CURVE_FITTING_SUPPORTED) || defined(ADC_CALI_SCHEME_LINE_FITTING_SUPPORTED)
+  const char *calibration_status = this->setup_flags_.calibration_complete ? "OK" : "FAILED";
+#else
+  const char *calibration_status = "N/A";  // This variant has no calibration scheme
+#endif
+  ESP_LOGCONFIG(TAG,
+                "  Channel:       %d\n"
+                "  Unit:          %s\n"
+                "  Attenuation:   %s\n"
+                "  Samples:       %i\n"
+                "  Sampling mode: %s\n"
+                "  Setup Status:\n"
+                "    Handle Init:  %s\n"
+                "    Config:       %s\n"
+                "    Calibration:  %s\n"
+                "    Overall Init: %s",
+                this->channel_, LOG_STR_ARG(adc_unit_to_str(this->adc_unit_)),
+                this->autorange_ ? "Auto" : LOG_STR_ARG(attenuation_to_str(this->attenuation_)), this->sample_count_,
+                LOG_STR_ARG(sampling_mode_to_str(this->sampling_mode_)),
+                this->setup_flags_.handle_init_complete ? "OK" : "FAILED",
+                this->setup_flags_.config_complete ? "OK" : "FAILED", calibration_status,
+                this->setup_flags_.init_complete ? "OK" : "FAILED");

  LOG_UPDATE_INTERVAL(this);
 }
@@ -184,12 +191,11 @@ float ADCSensor::sample_fixed_attenuation_() {
    } else {
      ESP_LOGW(TAG, "ADC calibration conversion failed with error %d, disabling calibration", err);
      if (this->calibration_handle_ != nullptr) {
-#if USE_ESP32_VARIANT_ESP32C3 || USE_ESP32_VARIANT_ESP32C5 || USE_ESP32_VARIANT_ESP32C6 || \
-    USE_ESP32_VARIANT_ESP32C61 || USE_ESP32_VARIANT_ESP32H2 || USE_ESP32_VARIANT_ESP32P4 || USE_ESP32_VARIANT_ESP32S3
+#if defined(ADC_CALI_SCHEME_CURVE_FITTING_SUPPORTED)
        adc_cali_delete_scheme_curve_fitting(this->calibration_handle_);
-#else   // Other ESP32 variants use line fitting calibration
+#elif defined(ADC_CALI_SCHEME_LINE_FITTING_SUPPORTED)
        adc_cali_delete_scheme_line_fitting(this->calibration_handle_);
-#endif  // ESP32C3 || ESP32C5 || ESP32C6 || ESP32C61 || ESP32H2 || ESP32P4 || ESP32S3
+#endif
        this->calibration_handle_ = nullptr;
      }
    }
@@ -217,10 +223,9 @@ float ADCSensor::sample_autorange_() {
    // Need to recalibrate for the new attenuation
    if (this->calibration_handle_ != nullptr) {
      // Delete old calibration handle
-#if USE_ESP32_VARIANT_ESP32C3 || USE_ESP32_VARIANT_ESP32C5 || USE_ESP32_VARIANT_ESP32C6 || \
-    USE_ESP32_VARIANT_ESP32C61 || USE_ESP32_VARIANT_ESP32H2 || USE_ESP32_VARIANT_ESP32P4 || USE_ESP32_VARIANT_ESP32S3
+#if defined(ADC_CALI_SCHEME_CURVE_FITTING_SUPPORTED)
      adc_cali_delete_scheme_curve_fitting(this->calibration_handle_);
-#else
+#elif defined(ADC_CALI_SCHEME_LINE_FITTING_SUPPORTED)
      adc_cali_delete_scheme_line_fitting(this->calibration_handle_);
 #endif
      this->calibration_handle_ = nullptr;
@@ -229,8 +234,7 @@ float ADCSensor::sample_autorange_() {
    // Create new calibration handle for this attenuation
    adc_cali_handle_t handle = nullptr;

-#if USE_ESP32_VARIANT_ESP32C3 || USE_ESP32_VARIANT_ESP32C5 || USE_ESP32_VARIANT_ESP32C6 || \
-    USE_ESP32_VARIANT_ESP32C61 || USE_ESP32_VARIANT_ESP32H2 || USE_ESP32_VARIANT_ESP32P4 || USE_ESP32_VARIANT_ESP32S3
+#if defined(ADC_CALI_SCHEME_CURVE_FITTING_SUPPORTED)
    adc_cali_curve_fitting_config_t cali_config = {};
 #if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 3, 0)
    cali_config.chan = this->channel_;
@@ -242,7 +246,7 @@ float ADCSensor::sample_autorange_() {
    err = adc_cali_create_scheme_curve_fitting(&cali_config, &handle);
    ESP_LOGVV(TAG, "Autorange atten=%d: Calibration handle creation %s (err=%d)", atten,
              (err == ESP_OK) ? "SUCCESS" : "FAILED", err);
-#else
+#elif defined(ADC_CALI_SCHEME_LINE_FITTING_SUPPORTED)
    adc_cali_line_fitting_config_t cali_config = {
      .unit_id = this->adc_unit_,
      .atten = atten,
@@ -264,10 +268,9 @@ float ADCSensor::sample_autorange_() {
    if (err != ESP_OK) {
      ESP_LOGW(TAG, "ADC read failed in autorange with error %d", err);
      if (handle != nullptr) {
-#if USE_ESP32_VARIANT_ESP32C3 || USE_ESP32_VARIANT_ESP32C5 || USE_ESP32_VARIANT_ESP32C6 || \
-    USE_ESP32_VARIANT_ESP32C61 || USE_ESP32_VARIANT_ESP32H2 || USE_ESP32_VARIANT_ESP32P4 || USE_ESP32_VARIANT_ESP32S3
+#if defined(ADC_CALI_SCHEME_CURVE_FITTING_SUPPORTED)
        adc_cali_delete_scheme_curve_fitting(handle);
-#else
+#elif defined(ADC_CALI_SCHEME_LINE_FITTING_SUPPORTED)
        adc_cali_delete_scheme_line_fitting(handle);
 #endif
      }
@@ -286,10 +289,9 @@ float ADCSensor::sample_autorange_() {
        ESP_LOGVV(TAG, "Autorange atten=%d: UNCALIBRATED FALLBACK - raw=%d -> %.6fV (3.3V ref)", atten, raw, voltage);
      }
      // Clean up calibration handle
-#if USE_ESP32_VARIANT_ESP32C3 || USE_ESP32_VARIANT_ESP32C5 || USE_ESP32_VARIANT_ESP32C6 || \
-    USE_ESP32_VARIANT_ESP32C61 || USE_ESP32_VARIANT_ESP32H2 || USE_ESP32_VARIANT_ESP32P4 || USE_ESP32_VARIANT_ESP32S3
+#if defined(ADC_CALI_SCHEME_CURVE_FITTING_SUPPORTED)
      adc_cali_delete_scheme_curve_fitting(handle);
-#else
+#elif defined(ADC_CALI_SCHEME_LINE_FITTING_SUPPORTED)
      adc_cali_delete_scheme_line_fitting(handle);
 #endif
    } else {
@@ -3,6 +3,7 @@ import logging
 import esphome.codegen as cg
 from esphome.components import sensor, voltage_sampler
 from esphome.components.esp32 import (
+    VARIANT_ESP32S31,
    get_esp32_variant,
    include_builtin_idf_component,
    require_adc_oneshot_iram,
@@ -56,6 +57,14 @@ def validate_config(config: ConfigType) -> ConfigType:
    if config[CONF_RAW] and config.get(CONF_ATTENUATION, None) == "auto":
        raise cv.Invalid("Automatic attenuation cannot be used when raw output is set")

+    # The S31 ADC supports a single attenuation level (SOC_ADC_ATTEN_NUM is 1)
+    if (
+        CORE.is_esp32
+        and get_esp32_variant() == VARIANT_ESP32S31
+        and config.get(CONF_ATTENUATION, "0db") != "0db"
+    ):
+        raise cv.Invalid("ESP32-S31 only supports 'attenuation: 0db'")
+
    if config.get(CONF_ATTENUATION, None) == "auto" and config.get(CONF_SAMPLES, 1) > 1:
        raise cv.Invalid(
            "Automatic attenuation cannot be used when multisampling is set"
@@ -162,8 +162,9 @@ void Alpha3::send_request_(uint8_t *request, size_t len) {
  auto status =
      esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->geni_handle_, len,
                               request, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-  if (status)
+  if (status) {
    ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str(), status);
+  }
 }

 void Alpha3::update() {
@@ -2391,8 +2391,9 @@ void APIConnection::process_batch_() {
    } else if (payload_size == 0) {
      // payload_size == 0 with remove set means encoding hit OOM and the
      // connection is being dropped; warn only for a genuinely oversized message
-      if (!this->flags_.remove)
+      if (!this->flags_.remove) {
        ESP_LOGW(TAG, "Message too large to send: type=%u", item.message_type);
+      }
      this->clear_batch_();
    }
    return;
@@ -433,8 +433,10 @@ void APIServer::send_homeassistant_action(const HomeassistantActionRequest &call
    // Home Assistant subscribes to actions shortly *after* authenticating, so actions
    // fired right at connection time (on_client_connected, on_time_sync, ...) can
    // arrive before the subscription and are lost - warn instead of failing silently.
-    ESP_LOGW(TAG, "Home Assistant %s '%s' dropped; %s", call.is_event ? "event" : "action", call.service.c_str(),
-             this->is_connected() ? "client has not subscribed to actions (yet)" : "no client connected");
+    ESP_LOGW(TAG, "Home Assistant %s '%s' dropped; %s",
+             call.is_event ? LOG_STR_LITERAL("event") : LOG_STR_LITERAL("action"), call.service.c_str(),
+             this->is_connected() ? LOG_STR_LITERAL("client has not subscribed to actions (yet)")
+                                  : LOG_STR_LITERAL("no client connected"));
  }
 }
 #ifdef USE_API_HOMEASSISTANT_ACTION_RESPONSES
@@ -23,8 +23,10 @@ void AQISensor::setup() {

 void AQISensor::dump_config() {
  ESP_LOGCONFIG(TAG, "AQI Sensor:");
-  ESP_LOGCONFIG(TAG, "  Calculation Type: %s", this->aqi_calc_type_ == AQI_TYPE ? "AQI" : "CAQI");
-  ESP_LOGCONFIG(TAG, "  Extended Range: %s", this->extended_range_ ? "enabled" : "disabled");
+  ESP_LOGCONFIG(TAG, "  Calculation Type: %s",
+                this->aqi_calc_type_ == AQI_TYPE ? LOG_STR_LITERAL("AQI") : LOG_STR_LITERAL("CAQI"));
+  ESP_LOGCONFIG(TAG, "  Extended Range: %s",
+                this->extended_range_ ? LOG_STR_LITERAL("enabled") : LOG_STR_LITERAL("disabled"));
  if (this->pm_2_5_sensor_ != nullptr) {
    ESP_LOGCONFIG(TAG, "  PM2.5 Sensor: '%s'", this->pm_2_5_sensor_->get_name().c_str());
  }
@@ -100,13 +100,15 @@ void MultiClickTriggerBase::schedule_is_valid_(uint32_t min_length) {
  }
  this->is_valid_ = false;
  this->set_timeout(MULTICLICK_IS_VALID_ID, min_length, [this]() {
-    ESP_LOGV(TAG, "Multi Click: You can now %s the button.", this->parent_->state ? "RELEASE" : "PRESS");
+    ESP_LOGV(TAG, "Multi Click: You can now %s the button.",
+             this->parent_->state ? LOG_STR_LITERAL("RELEASE") : LOG_STR_LITERAL("PRESS"));
    this->is_valid_ = true;
  });
 }
 void MultiClickTriggerBase::schedule_is_not_valid_(uint32_t max_length) {
  this->set_timeout(MULTICLICK_IS_NOT_VALID_ID, max_length, [this]() {
-    ESP_LOGV(TAG, "Multi Click: You waited too long to %s.", this->parent_->state ? "RELEASE" : "PRESS");
+    ESP_LOGV(TAG, "Multi Click: You waited too long to %s.",
+             this->parent_->state ? LOG_STR_LITERAL("RELEASE") : LOG_STR_LITERAL("PRESS"));
    this->is_valid_ = false;
    this->schedule_cooldown_();
  });
@@ -62,8 +62,9 @@ BdkActivityState bdk_scan_state(uint8_t activity_idx) {

 uint8_t bdk_scan_acquire_activity() {
  uint8_t idx = app_ble_get_idle_actv_idx_handle(SCAN_ACTV);
-  if (idx == INVALID_ACTIVITY_IDX)
+  if (idx == INVALID_ACTIVITY_IDX) {
    ESP_LOGE(TAG, "Scan start failed: no idle activity handle");
+  }
  return idx;
 }

@@ -181,8 +181,9 @@ void BK72xxBLE::enable() {
      break;
    }
  }
-  if (!bdaddr_live)
+  if (!bdaddr_live) {
    ESP_LOGW(TAG, "Controller address still unset after init; BLE stack may not have started");
+  }
 #endif

  this->state_ = BLEComponentState::ACTIVE;
@@ -210,8 +211,9 @@ void BK72xxBLE::loop() {
    // Re-check a settled scan; scan_start() refills the bring-up budget.
    // WARN: the only report of a drop that recovers inside its budget.
    if (this->scan_start(this->requested_.interval, this->requested_.window, this->requested_.active) !=
-        ScanOpResult::SETTLED)
+        ScanOpResult::SETTLED) {
      ESP_LOGW(TAG, "Controller dropped the scan; restarting");
+    }
  }

  // Drain the lock-free ring filled by the BLE task; all per-report work runs
@@ -230,8 +232,9 @@ void BK72xxBLE::loop() {
  // Log dropped reports — only reachable when reports were processed; drops can
  // only occur while the queue is full, and only this loop drains it.
  uint16_t dropped = this->report_queue_.get_and_reset_dropped_count();
-  if (dropped > 0)
+  if (dropped > 0) {
    ESP_LOGW(TAG, "Dropped %u scan reports due to queue overflow", dropped);
+  }
 }

 void BK72xxBLE::get_mac_lsb_first(uint8_t out[MAC_ADDRESS_SIZE]) const {
@@ -449,8 +452,9 @@ ScanOpResult BK72xxBLE::advance_stop_(BdkActivityState state, bool ready) {
  if (!ready) {
    // Acting mid-operation could delete an activity whose start lands
    // afterwards, leaking the slot with the radio on; wait.
-    if (this->last_result_ == ScanOpResult::SETTLED)
+    if (this->last_result_ == ScanOpResult::SETTLED) {
      ESP_LOGD(TAG, "Scan stop deferred (controller busy)");
+    }
    return ScanOpResult::PENDING;
  }
  // Settled, so CREATED unambiguously means "never started".
@@ -474,8 +478,9 @@ ScanOpResult BK72xxBLE::advance_start_(BdkActivityState state, bool ready) {
    return ScanOpResult::PENDING;
  }
  if (!ready) {
-    if (this->last_result_ == ScanOpResult::SETTLED)
+    if (this->last_result_ == ScanOpResult::SETTLED) {
      ESP_LOGD(TAG, "Scan start deferred (controller busy)");
+    }
    return ScanOpResult::PENDING;
  }
  if (state == BdkActivityState::CREATED) {
@@ -69,8 +69,9 @@ void BK72xxBLETracker::on_ota_global_state(ota::OTAState state, float progress,
    this->stop_scan();
    // The transfer starves the loop; a deferred stop would leave the radio
    // scanning for the whole update, so drain it here, bounded.
-    if (!this->parent_->flush_pending_stop(OTA_STOP_FLUSH_MS))
+    if (!this->parent_->flush_pending_stop(OTA_STOP_FLUSH_MS)) {
      ESP_LOGE(TAG, "Scan still stopping at OTA start; the radio may contend with the update");
+    }
  } else if (state == ota::OTA_ERROR || state == ota::OTA_ABORT) {
    // On success the device reboots, so restore only on a failed/aborted update;
    // loop() restarts the scan on its next iteration (continuous idle branch).
@@ -80,8 +80,9 @@ void BLEBinaryOutput::write_state(bool state) {
  esp_err_t err =
      esp_ble_gattc_write_char(this->parent()->get_gattc_if(), this->parent()->get_conn_id(), this->char_handle_,
                               sizeof(state_as_uint), &state_as_uint, this->write_type_, ESP_GATT_AUTH_REQ_NONE);
-  if (err != ESP_GATT_OK)
+  if (err != ESP_GATT_OK) {
    ESP_LOGW(TAG, "[%s] Write error, err=%d", this->char_uuid_.to_str(char_buf), err);
+  }
 }

 }  // namespace esphome::ble_client
@@ -327,10 +327,12 @@ void BME680Component::read_data_() {

  ESP_LOGD(TAG, "Got temperature=%.1f°C pressure=%.1fhPa humidity=%.1f%% gas_resistance=%.1fΩ", temperature, pressure,
           humidity, gas_resistance);
-  if (!gas_valid)
+  if (!gas_valid) {
    ESP_LOGW(TAG, "Gas measurement unsuccessful, reading invalid!");
-  if (!heat_stable)
+  }
+  if (!heat_stable) {
    ESP_LOGW(TAG, "Heater unstable, reading invalid! (Normal for a few readings after a power cycle)");
+  }

  if (this->temperature_sensor_ != nullptr)
    this->temperature_sensor_->publish_state(temperature);
@@ -162,8 +162,9 @@ void BME680BSECComponent::dump_config() {
                "  Supply Voltage: %sV\n"
                "  Sample Rate: %s\n"
                "  State Save Interval: %" PRIu32 "ms",
-                this->temperature_offset_, this->iaq_mode_ == IAQ_MODE_STATIC ? "Static" : "Mobile",
-                this->supply_voltage_ == SUPPLY_VOLTAGE_3V3 ? "3.3" : "1.8",
+                this->temperature_offset_,
+                this->iaq_mode_ == IAQ_MODE_STATIC ? LOG_STR_LITERAL("Static") : LOG_STR_LITERAL("Mobile"),
+                this->supply_voltage_ == SUPPLY_VOLTAGE_3V3 ? LOG_STR_LITERAL("3.3") : LOG_STR_LITERAL("1.8"),
                BME680_BSEC_SAMPLE_RATE_LOG(this->sample_rate_), this->state_save_interval_ms_);

  LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
@@ -3,7 +3,6 @@ import logging
 import esphome.codegen as cg
 from esphome.components import web_server_base, wifi
 from esphome.components.web_server_base import CONF_WEB_SERVER_BASE_ID
-from esphome.config_helpers import filter_source_files_from_platform
 import esphome.config_validation as cv
 from esphome.const import (
    CONF_AP,
@@ -15,7 +14,6 @@ from esphome.const import (
    PLATFORM_LN882X,
    PLATFORM_RP2,
    PLATFORM_RTL87XX,
-    PlatformFramework,
 )
 from esphome.core import CORE, coroutine_with_priority
 from esphome.coroutine import CoroPriority
@@ -76,17 +74,7 @@ def _final_validate(config: ConfigType) -> None:
            "Add 'ap:' to your WiFi configuration to enable the captive portal."
        )

-    # Register socket needs for DNS server and additional HTTP connections
-    # - 1 UDP socket for DNS server
-    # - 3 TCP sockets for captive portal detection probes + configuration requests
-    #   OS captive portal detection makes multiple probe requests that stay in TIME_WAIT.
-    #   Need headroom for actual user configuration requests.
-    #   LRU purging will reclaim idle sockets to prevent exhaustion from repeated attempts.
-    # The listening socket is registered by web_server_base (shared HTTP server).
-    from esphome.components import socket
-
-    socket.consume_sockets(3, "captive_portal")(config)
-    socket.consume_sockets(1, "captive_portal", socket.SocketType.UDP)(config)
+    web_server_base.consume_captive_dns_sockets(config, "captive_portal")


 FINAL_VALIDATE_SCHEMA = _final_validate
@@ -106,16 +94,4 @@ async def to_code(config: ConfigType) -> None:
    if config[CONF_COMPRESSION] == "gzip":
        cg.add_define("USE_CAPTIVE_PORTAL_GZIP")

-    if CORE.using_arduino and (CORE.is_esp8266 or CORE.is_libretiny or CORE.is_rp2):
-        cg.add_library("DNSServer", None)
-
-
-# Only compile the ESP-IDF DNS server when using ESP-IDF framework
-FILTER_SOURCE_FILES = filter_source_files_from_platform(
-    {
-        "dns_server_esp32_idf.cpp": {
-            PlatformFramework.ESP32_ARDUINO,
-            PlatformFramework.ESP32_IDF,
-        },
-    }
-)
+    web_server_base.add_captive_dns_library()
@@ -102,17 +102,7 @@ void CaptivePortal::start() {
    this->base_->add_handler_without_auth(this);
  }

-  network::IPAddress ip = wifi::global_wifi_component->wifi_soft_ap_ip();
-
-#if defined(USE_ESP32)
-  // Create DNS server instance for ESP-IDF
-  this->dns_server_ = make_unique<DNSServer>();
-  this->dns_server_->start(ip);
-#elif defined(USE_ARDUINO)
-  this->dns_server_ = make_unique<DNSServer>();
-  this->dns_server_->setErrorReplyCode(DNSReplyCode::NoError);
-  this->dns_server_->start(53, ESPHOME_F("*"), ip);
-#endif
+  this->dns_.start(wifi::global_wifi_component->wifi_soft_ap_ip());

  this->initialized_ = true;
  this->active_ = true;
@@ -1,16 +1,11 @@
 #pragma once
 #include "esphome/core/defines.h"
 #ifdef USE_CAPTIVE_PORTAL
-#include <memory>
-#if defined(USE_ESP32)
-#include "dns_server_esp32_idf.h"
-#elif defined(USE_ARDUINO)
-#include <DNSServer.h>
-#endif
 #include "esphome/core/component.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/preferences.h"
 #include "esphome/components/web_server_base/web_server_base.h"
+#include "esphome/components/web_server_base/captive_dns.h"

 namespace esphome::captive_portal {

@@ -19,17 +14,7 @@ class CaptivePortal final : public AsyncWebHandler, public Component {
  CaptivePortal(web_server_base::WebServerBase *base);
  void setup() override;
  void dump_config() override;
-  void loop() override {
-#if defined(USE_ESP32)
-    if (this->dns_server_ != nullptr) {
-      this->dns_server_->process_next_request();
-    }
-#elif defined(USE_ARDUINO)
-    if (this->dns_server_ != nullptr) {
-      this->dns_server_->processNextRequest();
-    }
-#endif
-  }
+  void loop() override { this->dns_.loop(); }
  float get_setup_priority() const override;
  void start();
  bool is_active() const { return this->active_; }
@@ -37,10 +22,7 @@ class CaptivePortal final : public AsyncWebHandler, public Component {
    this->active_ = false;
    this->disable_loop();  // Stop processing DNS requests
    this->base_->deinit();
-    if (this->dns_server_ != nullptr) {
-      this->dns_server_->stop();
-      this->dns_server_ = nullptr;
-    }
+    this->dns_.stop();
  }

  bool canHandle(AsyncWebServerRequest *request) const override {
@@ -60,9 +42,7 @@ class CaptivePortal final : public AsyncWebHandler, public Component {
  web_server_base::WebServerBase *base_;
  bool initialized_{false};
  bool active_{false};
-#if defined(USE_ARDUINO) || defined(USE_ESP32)
-  std::unique_ptr<DNSServer> dns_server_{nullptr};
-#endif
+  web_server_base::CaptiveDNS dns_;
 };

 extern CaptivePortal *global_captive_portal;  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
@@ -749,33 +749,39 @@ void Climate::dump_traits_(const char *tag) {
  }
  if (!traits.get_supported_modes().empty()) {
    ESP_LOGCONFIG(tag, "  Supported modes:");
-    for (ClimateMode m : traits.get_supported_modes())
+    for (ClimateMode m : traits.get_supported_modes()) {
      ESP_LOGCONFIG(tag, "  - %s", LOG_STR_ARG(climate_mode_to_string(m)));
+    }
  }
  if (!traits.get_supported_fan_modes().empty()) {
    ESP_LOGCONFIG(tag, "  Supported fan modes:");
-    for (ClimateFanMode m : traits.get_supported_fan_modes())
+    for (ClimateFanMode m : traits.get_supported_fan_modes()) {
      ESP_LOGCONFIG(tag, "  - %s", LOG_STR_ARG(climate_fan_mode_to_string(m)));
+    }
  }
  if (!traits.get_supported_custom_fan_modes().empty()) {
    ESP_LOGCONFIG(tag, "  Supported custom fan modes:");
-    for (const char *s : traits.get_supported_custom_fan_modes())
+    for (const char *s : traits.get_supported_custom_fan_modes()) {
      ESP_LOGCONFIG(tag, "  - %s", s);
+    }
  }
  if (!traits.get_supported_presets().empty()) {
    ESP_LOGCONFIG(tag, "  Supported presets:");
-    for (ClimatePreset p : traits.get_supported_presets())
+    for (ClimatePreset p : traits.get_supported_presets()) {
      ESP_LOGCONFIG(tag, "  - %s", LOG_STR_ARG(climate_preset_to_string(p)));
+    }
  }
  if (!traits.get_supported_custom_presets().empty()) {
    ESP_LOGCONFIG(tag, "  Supported custom presets:");
-    for (const char *s : traits.get_supported_custom_presets())
+    for (const char *s : traits.get_supported_custom_presets()) {
      ESP_LOGCONFIG(tag, "  - %s", s);
+    }
  }
  if (!traits.get_supported_swing_modes().empty()) {
    ESP_LOGCONFIG(tag, "  Supported swing modes:");
-    for (ClimateSwingMode m : traits.get_supported_swing_modes())
+    for (ClimateSwingMode m : traits.get_supported_swing_modes()) {
      ESP_LOGCONFIG(tag, "  - %s", LOG_STR_ARG(climate_swing_mode_to_string(m)));
+    }
  }
 }

@@ -14,6 +14,7 @@ CONF_CHANNEL_COLORS = "channel_colors"
 CONF_CLIMATE_ID = "climate_id"
 CONF_CO2_EQUIVALENT = "co2_equivalent"
 CONF_COLOR_DEPTH = "color_depth"
+CONF_COLUMNS = "columns"
 CONF_CRC_ENABLE = "crc_enable"
 CONF_DATA_BITS = "data_bits"
 CONF_DESCRIPTION = "description"
@@ -25,6 +26,7 @@ CONF_GYROSCOPE_RANGE = "gyroscope_range"
 CONF_IAQ = "iaq"
 CONF_IGNORE_NOT_FOUND = "ignore_not_found"
 CONF_IS_WRGB = "is_wrgb"
+CONF_KEYS = "keys"
 CONF_LABEL = "label"
 CONF_LIBRETINY = "libretiny"
 CONF_LOOP = "loop"
@@ -249,7 +249,7 @@ bool CS5460AComponent::check_status_() {
    bool dir = status & (1 << 21);
    if (current_gain_ < 0)
      dir = !dir;
-    ESP_LOGI(TAG, "Energy counter %s pulse", dir ? "negative" : "positive");
+    ESP_LOGI(TAG, "Energy counter %s pulse", dir ? LOG_STR_LITERAL("negative") : LOG_STR_LITERAL("positive"));
    clear |= 1 << 22;
  }

@@ -319,7 +319,9 @@ void CS5460AComponent::dump_config() {
  ESP_LOGCONFIG(TAG,
                "CS5460A:\n"
                "  Init status: %s",
-                state == COMPONENT_STATE_LOOP ? "OK" : (state == COMPONENT_STATE_FAILED ? "failed" : "other"));
+                state == COMPONENT_STATE_LOOP
+                    ? LOG_STR_LITERAL("OK")
+                    : (state == COMPONENT_STATE_FAILED ? LOG_STR_LITERAL("failed") : LOG_STR_LITERAL("other")));
  LOG_PIN("  CS Pin: ", cs_);
  ESP_LOGCONFIG(TAG,
                "  Samples / cycle: %" PRIu32 "\n"
@@ -330,9 +332,10 @@ void CS5460AComponent::dump_config() {
                "  Current HPF: %s\n"
                "  Voltage HPF: %s\n"
                "  Pulse energy: %.2f Wh",
-                samples_, phase_offset_, pga_gain_ == CS5460A_PGA_GAIN_50X ? "50x" : "10x", current_gain_,
-                voltage_gain_, current_hpf_ ? "enabled" : "disabled", voltage_hpf_ ? "enabled" : "disabled",
-                pulse_energy_wh_);
+                samples_, phase_offset_,
+                pga_gain_ == CS5460A_PGA_GAIN_50X ? LOG_STR_LITERAL("50x") : LOG_STR_LITERAL("10x"), current_gain_,
+                voltage_gain_, current_hpf_ ? LOG_STR_LITERAL("enabled") : LOG_STR_LITERAL("disabled"),
+                voltage_hpf_ ? LOG_STR_LITERAL("enabled") : LOG_STR_LITERAL("disabled"), pulse_energy_wh_);
  LOG_SENSOR("  ", "Voltage", voltage_sensor_);
  LOG_SENSOR("  ", "Current", current_sensor_);
  LOG_SENSOR("  ", "Power", power_sensor_);
@@ -0,0 +1,45 @@
+#include "d01.h"
+#include "esphome/core/log.h"
+
+// uart specification for d01 sensor from https://manuals.plus/ae/1005006417362019:
+//
+// A frame of serial output data includes 4 bytes, formatted as follows:
+// __Characteristic byte: Fixed value 0xA5.
+// __Data byte: DATAH is the high 7 bits of the concentration value, and DATAL is the low 7 bits of the concentration
+// value.
+// __Check byte: The low 7 bits of the sum of all bytes before the check byte.
+//
+// If the serial output is 4 bytes of data: 0*A5 0*01 0*2C 0*52, then DATAH = 0*01 = 1, DATAL = 0*2C = 44.
+// Concentration value = 1*128 + 44 = 172 µg/m³.
+//
+// The PM2.5 dust concentration value obtained from the dust sensor needs to be calibrated with a K value coefficient
+// based on the TSI instrument's photometric method. It is generally recommended to use 0.4.
+
+namespace esphome::d01 {
+
+static const char *const TAG = "d01";
+
+static const uint8_t D01_FRAME_HEADER = 0xA5;
+
+void D01SensorComponent::dump_config() { LOG_SENSOR("  ", "D01 PM2.5", this); }
+
+void D01SensorComponent::loop() {
+  uint8_t buf[4];
+  while (this->available() >= 4) {
+    if (this->peek() != D01_FRAME_HEADER) {
+      this->read();
+      continue;
+    }
+    this->read_array(buf, 4);
+    uint8_t sum = (buf[0] + buf[1] + buf[2]) & 0x7F;
+    if (sum != buf[3]) {
+      ESP_LOGW(TAG, "checksum mismatch");
+      continue;
+    }
+    uint16_t latest_concentration = (buf[1] & 0x7F) * 128 + (buf[2] & 0x7F);
+    ESP_LOGV(TAG, "Unadjusted PM2.5 Concentration: %d µg/m³", latest_concentration);
+    this->publish_state(latest_concentration);
+  }
+}
+
+}  // namespace esphome::d01
@@ -0,0 +1,14 @@
+#pragma once
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/uart/uart.h"
+
+namespace esphome::d01 {
+
+class D01SensorComponent final : public sensor::Sensor, public Component, public uart::UARTDevice {
+ public:
+  void dump_config() override;
+  void loop() override;
+};
+
+}  // namespace esphome::d01
@@ -0,0 +1,45 @@
+import esphome.codegen as cg
+from esphome.components import sensor, uart
+import esphome.config_validation as cv
+from esphome.const import (
+    DEVICE_CLASS_PM25,
+    ICON_BLUR,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_MICROGRAMS_PER_CUBIC_METER,
+)
+from esphome.types import ConfigType
+
+CODEOWNERS = ["@ch604"]
+DEPENDENCIES = ["uart"]
+
+d01_ns = cg.esphome_ns.namespace("d01")
+D01SensorComponent = d01_ns.class_(
+    "D01SensorComponent", sensor.Sensor, uart.UARTDevice, cg.Component
+)
+
+
+CONFIG_SCHEMA = (
+    sensor.sensor_schema(
+        D01SensorComponent,
+        unit_of_measurement=UNIT_MICROGRAMS_PER_CUBIC_METER,
+        icon=ICON_BLUR,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_PM25,
+        state_class=STATE_CLASS_MEASUREMENT,
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+    .extend(uart.UART_DEVICE_SCHEMA)
+)
+
+FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
+    "d01",
+    baud_rate=9600,
+    require_rx=True,
+    require_tx=False,
+)
+
+
+async def to_code(config: ConfigType) -> None:
+    var = await sensor.new_sensor(config)
+    await cg.register_component(var, config)
+    await uart.register_uart_device(var, config)
@@ -20,8 +20,8 @@ void DHT::dump_config() {
                "DHT:\n"
                "  %sModel: %s\n"
                "  Internal pull-up: %s",
-                this->is_auto_detect_ ? "Auto-detected " : "",
-                this->model_ == DHT_MODEL_DHT11 ? "DHT11" : "DHT22 or equivalent",
+                this->is_auto_detect_ ? LOG_STR_LITERAL("Auto-detected ") : "",
+                this->model_ == DHT_MODEL_DHT11 ? LOG_STR_LITERAL("DHT11") : LOG_STR_LITERAL("DHT22 or equivalent"),
                ONOFF(this->t_pin_->get_flags() & gpio::FLAG_PULLUP));
  LOG_PIN("  Pin: ", this->t_pin_);
  LOG_UPDATE_INTERVAL(this);
@@ -154,8 +154,9 @@ bool HOT IRAM_ATTR DHT::read_sensor_(float *temperature, float *humidity, bool r
    }
  }
  if (error_code != 0) {
-    if (report_errors)
+    if (report_errors) {
      ESP_LOGW(TAG, ESP_LOG_MSG_COMM_FAIL);
+    }
    return false;
  }

@@ -0,0 +1,68 @@
+#include "ds1603l.h"
+
+#include <cstring>
+
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
+
+namespace esphome::ds1603l {
+
+static const char *const TAG = "ds1603l.sensor";
+
+void DS1603L::loop() {
+  // Assemble frames one byte at a time so a stream that starts mid-frame can realign
+  uint8_t byte;
+  while (this->available() > 0 && this->read_byte(&byte)) {
+    if (this->rx_count_ == 0 && byte != HEADER_BYTE) {
+      ESP_LOGV(TAG, "Skipping byte 0x%02X while looking for header", byte);
+      continue;
+    }
+
+    this->rx_buffer_[this->rx_count_++] = byte;
+    if (this->rx_count_ < FRAME_SIZE) {
+      continue;
+    }
+
+    if (this->parse_data_()) {
+      this->rx_count_ = 0;
+    } else {
+      // The header byte was part of the payload of a misaligned frame, so realign instead of dropping everything
+      this->resync_();
+    }
+  }
+}
+
+void DS1603L::dump_config() { LOG_SENSOR("", "DS1603L", this); }
+
+bool DS1603L::parse_data_() {
+  uint8_t header = this->rx_buffer_[0];
+  uint8_t data_h = this->rx_buffer_[1];
+  uint8_t data_l = this->rx_buffer_[2];
+  uint8_t checksum = this->rx_buffer_[3];
+
+  uint8_t computed_checksum = (header + data_h + data_l) & 0xFF;
+
+  ESP_LOGV(TAG, "Data: Header=0x%02X, Data_H=0x%02X, Data_L=0x%02X, Checksum=0x%02X", header, data_h, data_l, checksum);
+
+  if (checksum != computed_checksum) {
+    ESP_LOGW(TAG, "Checksum mismatch: received 0x%02X, expected 0x%02X", checksum, computed_checksum);
+    return false;
+  }
+
+  this->publish_state(encode_uint16(data_h, data_l));
+  return true;
+}
+
+void DS1603L::resync_() {
+  // Drop the byte that was treated as the header, then look for the next candidate header in what is left
+  size_t start = 1;
+  while (start < this->rx_count_ && this->rx_buffer_[start] != HEADER_BYTE) {
+    start++;
+  }
+  this->rx_count_ -= start;
+  if (this->rx_count_ > 0) {
+    memmove(this->rx_buffer_, this->rx_buffer_ + start, this->rx_count_);
+  }
+}
+
+}  // namespace esphome::ds1603l
@@ -0,0 +1,30 @@
+#pragma once
+
+#include <cstddef>
+#include <cstdint>
+
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/uart/uart.h"
+#include "esphome/core/component.h"
+
+namespace esphome::ds1603l {
+
+class DS1603L final : public sensor::Sensor, public Component, public uart::UARTDevice {
+ public:
+  void loop() override;
+  void dump_config() override;
+
+ protected:
+  static constexpr uint8_t HEADER_BYTE = 0xFF;
+  static constexpr size_t FRAME_SIZE = 4;
+
+  // Validates the checksum of the frame in rx_buffer_ and publishes it. Returns false if the frame is invalid.
+  bool parse_data_();
+  // Drops the first buffered byte and realigns the buffer on the next possible header byte.
+  void resync_();
+
+  uint8_t rx_buffer_[FRAME_SIZE];  // Buffer for the frame being assembled
+  size_t rx_count_{0};             // Number of bytes currently in rx_buffer_
+};
+
+}  // namespace esphome::ds1603l
@@ -0,0 +1,43 @@
+import esphome.codegen as cg
+from esphome.components import sensor, uart
+import esphome.config_validation as cv
+from esphome.const import (
+    DEVICE_CLASS_DISTANCE,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_MILLIMETER,
+)
+from esphome.types import ConfigType
+
+CODEOWNERS = ["@JakeLC15"]
+DEPENDENCIES = ["uart"]
+
+ds1603l_ns = cg.esphome_ns.namespace("ds1603l")
+DS1603L = ds1603l_ns.class_("DS1603L", sensor.Sensor, cg.Component, uart.UARTDevice)
+
+
+CONFIG_SCHEMA = (
+    sensor.sensor_schema(
+        DS1603L,
+        unit_of_measurement=UNIT_MILLIMETER,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_DISTANCE,
+        state_class=STATE_CLASS_MEASUREMENT,
+    )
+    .extend(uart.UART_DEVICE_SCHEMA)
+    .extend(cv.COMPONENT_SCHEMA)
+)
+
+FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
+    "ds1603l",
+    baud_rate=9600,
+    require_tx=False,
+    require_rx=True,
+    data_bits=8,
+    stop_bits=1,
+)
+
+
+async def to_code(config: ConfigType) -> None:
+    var = await sensor.new_sensor(config)
+    await cg.register_component(var, config)
+    await uart.register_uart_device(var, config)
@@ -93,7 +93,7 @@ void Emc2101Component::dump_config() {
  if (this->is_failed()) {
    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
  }
-  ESP_LOGCONFIG(TAG, "  Mode: %s", this->dac_mode_ ? "DAC" : "PWM");
+  ESP_LOGCONFIG(TAG, "  Mode: %s", this->dac_mode_ ? LOG_STR_LITERAL("DAC") : LOG_STR_LITERAL("PWM"));
  if (this->dac_mode_) {
    ESP_LOGCONFIG(TAG, "  DAC Conversion Rate: %X", this->dac_conversion_rate_);
  } else {
@@ -216,7 +216,7 @@ void ENS210Component::extract_measurement_(uint32_t val, int *data, int *status)
 // Sets ENS210 to low (true) or high (false) power. Returns false on I2C problems.
 bool ENS210Component::set_low_power_(bool enable) {
  uint8_t low_power_cmd = enable ? 0x01 : 0x00;
-  ESP_LOGD(TAG, "Enable low power: %s", enable ? "true" : "false");
+  ESP_LOGD(TAG, "Enable low power: %s", enable ? LOG_STR_LITERAL("true") : LOG_STR_LITERAL("false"));
  bool result = this->write_byte(ENS210_REGISTER_SYS_CTRL, low_power_cmd);
  delay(ENS210_BOOTING_MS);
  return result;
@@ -0,0 +1,139 @@
+#include "epaper_spi_uc8179.h"
+
+#include <algorithm>
+
+#include "esphome/core/log.h"
+
+namespace esphome::epaper_spi {
+
+static constexpr const char *const TAG = "epaper_spi.uc8179";
+
+bool EPaperUC8179::initialise(bool partial) {
+  EPaperBase::initialise(partial);  // send the model init sequence
+  this->partial_ = partial;
+  ESP_LOGV(TAG, "Power on");
+  // POWER ON must precede the waveform/mode registers and the data transfer
+  // (the original driver powers on and busy-waits before writing them).
+  // The state machine busy-waits before entering TRANSFER_DATA.
+  this->command(0x04);
+  // Give the busy line time to assert before the state machine polls it
+  this->next_delay_ = 100;
+  return true;
+}
+
+// Set up the refresh mode. Must be called after power-on has completed.
+void EPaperUC8179::set_refresh_mode_() {
+  if (!this->is_using_partial_update_()) {
+    return;  // plain full refresh uses the mode set by the init sequence
+  }
+  // Fast and partial refresh use flipped data polarity and a floating border
+  this->cmd_data(0x50, {0xA9, 0x07});
+  // Force the waveform via the temperature registers: 0x5A selects the fast
+  // full-refresh waveform, 0x6E the partial-refresh waveform
+  this->cmd_data(0xE0, {0x02});
+  if (this->partial_) {
+    this->cmd_data(0xE5, {0x6E});
+    this->command(0x91);  // enter partial mode
+    // Set the partial window to the full screen
+    const uint16_t x_end = this->width_ - 1;
+    const uint16_t y_end = this->height_ - 1;
+    this->cmd_data(0x90, {0x00, 0x00, static_cast<uint8_t>(x_end >> 8), static_cast<uint8_t>(x_end & 0xFF), 0x00, 0x00,
+                          static_cast<uint8_t>(y_end >> 8), static_cast<uint8_t>(y_end & 0xFF), 0x01});
+  } else {
+    this->cmd_data(0xE5, {0x5A});
+    this->command(0x92);  // exit partial mode
+  }
+}
+
+bool HOT EPaperUC8179::transfer_data() {
+  const uint32_t start_time = millis();
+  const size_t buffer_length = this->buffer_length_;
+  if (this->current_data_index_ == 0) {
+    this->set_refresh_mode_();
+  }
+  // Fast full refresh sends the previous-image plane as well, so that every pixel transitions
+  const bool two_pass = this->is_using_partial_update_() && !this->partial_;
+  // Plain full refresh sends inverted data (buffer is 1=white, the wire wants 0=white);
+  // in fast/partial mode the data polarity is flipped via the VCOM/data-interval
+  // register instead, so the new-image plane is sent unmodified
+  const bool invert_new_data = !this->is_using_partial_update_();
+
+  uint8_t bytes_to_send[MAX_TRANSFER_SIZE];
+
+  // Phase 1 (fast full refresh only): previous image via 0x10 (DTM1), inverse of the new image
+  if (two_pass && this->current_data_index_ < buffer_length) {
+    if (this->current_data_index_ == 0) {
+      this->command(0x10);  // DATA START TRANSMISSION 1 (previous image)
+    }
+    this->start_data_();
+    while (this->current_data_index_ < buffer_length) {
+      const size_t bytes_to_copy = std::min(MAX_TRANSFER_SIZE, buffer_length - this->current_data_index_);
+      for (size_t i = 0; i < bytes_to_copy; i++) {
+        bytes_to_send[i] = ~this->buffer_[this->current_data_index_ + i];
+      }
+      this->write_array(bytes_to_send, bytes_to_copy);
+      this->current_data_index_ += bytes_to_copy;
+      if (millis() - start_time > MAX_TRANSFER_TIME) {
+        this->disable();
+        return false;
+      }
+    }
+    this->disable();
+  }
+
+  // Phase 2: new image via 0x13 (DTM2)
+  const size_t offset = two_pass ? buffer_length : 0;
+  const size_t total = offset + buffer_length;
+  if (this->current_data_index_ < total) {
+    if (this->current_data_index_ == offset) {
+      this->command(0x13);  // DATA START TRANSMISSION 2 (new image)
+    }
+    this->start_data_();
+    while (this->current_data_index_ < total) {
+      const size_t bytes_to_copy = std::min(MAX_TRANSFER_SIZE, total - this->current_data_index_);
+      const size_t data_idx = this->current_data_index_ - offset;
+      for (size_t i = 0; i < bytes_to_copy; i++) {
+        const uint8_t byte = this->buffer_[data_idx + i];
+        bytes_to_send[i] = invert_new_data ? ~byte : byte;
+      }
+      this->write_array(bytes_to_send, bytes_to_copy);
+      this->current_data_index_ += bytes_to_copy;
+      if (millis() - start_time > MAX_TRANSFER_TIME) {
+        this->disable();
+        return false;
+      }
+    }
+    this->disable();
+  }
+
+  this->current_data_index_ = 0;
+  return true;
+}
+
+void EPaperUC8179::power_on() {
+  // Power-on is sent at the end of initialise() instead, because the
+  // waveform/mode registers and the data transfer must follow it
+}
+
+void EPaperUC8179::refresh_screen(bool /*partial*/) {
+  ESP_LOGV(TAG, "Refresh");
+  this->command(0x12);  // DISPLAY REFRESH
+  // Delay the next busy poll: the busy line takes a short time to assert after
+  // the refresh command, and polling too early would read it as already idle
+  this->next_delay_ = 100;
+}
+
+void EPaperUC8179::power_off() {
+  ESP_LOGV(TAG, "Power off");
+  this->command(0x02);  // POWER OFF
+}
+
+void EPaperUC8179::deep_sleep() {
+  // Deep sleep loses the previous-image RAM that partial refresh compares against
+  if (!this->is_using_partial_update_()) {
+    ESP_LOGV(TAG, "Deep sleep");
+    this->cmd_data(0x07, {0xA5});  // DEEP SLEEP with check code
+  }
+}
+
+}  // namespace esphome::epaper_spi
@@ -0,0 +1,52 @@
+#pragma once
+
+#include "epaper_spi.h"
+
+namespace esphome::epaper_spi {
+
+/**
+ * Monochrome e-paper displays using the UC8179 controller.
+ * Supports: 7.5" V2 (EPD_7in5_V2), 800x480 pixels, as used by the
+ * Waveshare 7.5" V2 HAT and the Seeed reTerminal E1001.
+ *
+ * Buffer layout: 1 bit per pixel, 1=white, 0=black (the base class default).
+ *
+ * The INITIALISE state sends the panel configuration followed by power-on
+ * (0x04); the state machine busy-waits for power-on to complete before
+ * TRANSFER_DATA, which first writes the waveform/mode registers (these are
+ * only accepted while powered) and then the image data. The state machine
+ * busy-waits again before triggering REFRESH_SCREEN (0x12).
+ *
+ * Three refresh modes are used, following the Waveshare EPD_7in5_V2 examples:
+ * - full_update_every == 1: plain full refresh. The new image is sent
+ *   inverted to DTM2 (0x13) and the controller uses its normal waveform.
+ * - full_update_every > 1, full update: fast full refresh. The data polarity
+ *   is flipped via the VCOM/data-interval register, a fast waveform is forced
+ *   via the temperature registers, and the image is sent to both DTM1 (0x10,
+ *   inverted) and DTM2 (0x13) so that every pixel transitions.
+ * - full_update_every > 1, partial update: partial refresh. A partial-update
+ *   waveform is forced, partial mode is entered with a full-screen window and
+ *   only DTM2 is sent; the controller compares against its previous-image RAM.
+ */
+class EPaperUC8179 final : public EPaperBase {
+ public:
+  EPaperUC8179(const char *name, uint16_t width, uint16_t height, const uint8_t *init_sequence,
+               size_t init_sequence_length)
+      : EPaperBase(name, width, height, init_sequence, init_sequence_length, DISPLAY_TYPE_BINARY) {
+    this->buffer_length_ = this->row_width_ * height;
+  }
+
+ protected:
+  bool initialise(bool partial) override;
+  bool transfer_data() override;
+  void refresh_screen(bool partial) override;
+  void power_on() override;
+  void power_off() override;
+  void deep_sleep() override;
+  void set_refresh_mode_();
+
+  // Set by initialise() so transfer_data() knows which planes to send
+  bool partial_{};
+};
+
+}  // namespace esphome::epaper_spi
@@ -0,0 +1,93 @@
+"""Monochrome e-paper displays using the UC8179 controller.
+
+Supported models:
+- waveshare-7.5in-v2: 7.5" mono display, 800x480 pixels (EPD_7in5_V2)
+- seeed-reterminal-e1001: Seeed reTerminal E1001, which uses the same
+  7.5" 800x480 panel on an integrated ESP32-S3 board
+
+Panel configuration and power-on (0x04) are both sent during the INITIALISE
+state; the state machine's built-in busy wait then covers the power-on delay
+before the waveform/mode registers and image data are transferred.
+
+These displays support fast full and partial refresh: set ``full_update_every``
+greater than 1 to enable it. Every ``full_update_every``-th update is a fast
+full refresh, with partial refreshes in between.
+"""
+
+from typing import Any
+
+from esphome.const import CONF_DATA_RATE
+
+from . import EpaperModel
+
+
+class UC8179(EpaperModel):
+    """EpaperModel class for monochrome displays using the UC8179 controller."""
+
+    def __init__(
+        self,
+        name: str,
+        class_name: str = "EPaperUC8179",
+        data_rate: str = "10MHz",
+        **defaults: Any,
+    ) -> None:
+        defaults.setdefault(CONF_DATA_RATE, data_rate)
+        super().__init__(name, class_name, **defaults)
+
+    def get_init_sequence(self, config: dict) -> tuple:
+        """Generate the initialization sequence for UC8179 mono displays.
+
+        Panel configuration only — the driver appends power-on (0x04) at the
+        end of the INITIALISE state, and the state machine busy-waits for it
+        to complete before the data transfer starts.
+        """
+        width, height = self.get_dimensions(config)
+        return (
+            # POWER SETTING
+            (0x01, 0x07, 0x07, 0x3F, 0x3F),
+            # BOOSTER SOFT START
+            (0x06, 0x17, 0x17, 0x28, 0x17),
+            # PANEL SETTING (black/white mode, LUT from OTP)
+            (0x00, 0x1F),
+            # RESOLUTION SETTING (width x height)
+            (
+                0x61,
+                (width >> 8) & 0xFF,
+                width & 0xFF,
+                (height >> 8) & 0xFF,
+                height & 0xFF,
+            ),
+            # DUAL SPI MODE (disabled)
+            (0x15, 0x00),
+            # VCOM AND DATA INTERVAL SETTING
+            (0x50, 0x10, 0x07),
+            # TCON SETTING
+            (0x60, 0x22),
+        )
+
+
+uc8179 = UC8179("uc8179")
+
+# Waveshare 7.5" V2 mono (EPD_7in5_V2) — 800x480, UC8179 controller
+waveshare_7_5_v2 = uc8179.extend(
+    "waveshare-7.5in-v2",
+    width=800,
+    height=480,
+)
+
+# Seeed reTerminal E1001 — 7.5" mono e-paper (800x480), same panel as the
+# Waveshare 7.5" V2, driven by an integrated ESP32-S3 board
+waveshare_7_5_v2.extend(
+    "seeed-reterminal-e1001",
+    cs_pin=10,
+    dc_pin=11,
+    reset_pin=12,
+    busy_pin={
+        "number": 13,
+        "inverted": True,
+        "mode": {
+            "input": True,
+            "pullup": True,
+        },
+    },
+)
@@ -182,6 +182,13 @@ SIGNED_OTA_V1_ECDSA_VARIANTS = {
    VARIANT_ESP32,
 }

+# Variants that support execution from PSRAM
+PSRAM_XIP_VARIANTS = {
+    VARIANT_ESP32S3,
+    VARIANT_ESP32P4,
+    VARIANT_ESP32S31,
+}
+
 # NVS encryption (HMAC peripheral scheme) is only available on variants that
 # expose the HMAC peripheral (SOC_HMAC_SUPPORTED in soc_caps.h). The original
 # ESP32 and ESP32-C2 do not have it. New variants with an HMAC peripheral
@@ -1523,7 +1530,7 @@ def final_validate(config) -> None:
            )
        )
    if advanced[CONF_EXECUTE_FROM_PSRAM]:
-        if config[CONF_VARIANT] not in {VARIANT_ESP32S3, VARIANT_ESP32P4}:
+        if config[CONF_VARIANT] not in PSRAM_XIP_VARIANTS:
            errs.append(
                cv.Invalid(
                    f"'{CONF_EXECUTE_FROM_PSRAM}' is not available on this esp32 variant",
@@ -2727,13 +2734,7 @@ async def to_code(config):
    _configure_lwip_max_sockets(conf)

    if advanced[CONF_EXECUTE_FROM_PSRAM]:
-        if variant == VARIANT_ESP32S3:
-            add_idf_sdkconfig_option("CONFIG_SPIRAM_FETCH_INSTRUCTIONS", True)
-            add_idf_sdkconfig_option("CONFIG_SPIRAM_RODATA", True)
-        elif variant == VARIANT_ESP32P4:
-            add_idf_sdkconfig_option("CONFIG_SPIRAM_XIP_FROM_PSRAM", True)
-        else:
-            raise ValueError("Unhandled ESP32 variant")
+        add_idf_sdkconfig_option("CONFIG_SPIRAM_XIP_FROM_PSRAM", True)

    # Apply LWIP core locking for better socket performance
    # This is already enabled by default in Arduino framework, where it provides
@@ -5,11 +5,14 @@ import esphome.config_validation as cv
 from esphome.const import CONF_INPUT, CONF_MODE, CONF_NUMBER, CONF_SCL, CONF_SDA
 from esphome.pins import check_strapping_pin

-# Per the ESP32-S31 datasheet (page 96):
+# Per the ESP32-S31 IDF DOCS and datasheet:
+# https://docs.espressif.com/projects/esp-idf/en/v6.1/esp32s31/api-reference/peripherals/gpio.html
 # https://documentation.espressif.com/esp32-s31_datasheet_en.pdf
-_ESP32S31_SPI_FLASH_PINS: set[int] = {27, 28, 29, 31, 32, 33}
-# GPIO60/GPIO61 set the boot mode; GPIO37 selects the JTAG signal source.
-_ESP32S31_STRAPPING_PINS: set[int] = {37, 60, 61}
+_ESP32S31_SPI_FLASH_PINS: set[int] = {26, 27, 28, 30, 31, 32}
+_ESP32S31_INVALID_PINS: set[int] = {29, 41}
+# GPIO60/GPIO61 set the boot mode; GPIO37 selects the JTAG signal source;
+# GPIO36 sets the VDD_SPI voltage.
+_ESP32S31_STRAPPING_PINS: set[int] = {36, 37, 60, 61}
 # LP I2C is fixed to GPIO6 (SCL) / GPIO7 (SDA) per the datasheet IO MUX table.
 _ESP32S31_I2C_LP_PINS = {"SDA": 7, "SCL": 6}

@@ -19,6 +22,8 @@ _LOGGER = logging.getLogger(__name__)
 def esp32_s31_validate_gpio_pin(value: int) -> int:
    if value < 0 or value > 61:
        raise cv.Invalid(f"Invalid pin number: {value} (must be 0-61)")
+    if value in _ESP32S31_INVALID_PINS:
+        raise cv.Invalid(f"GPIO{value} does not exist on ESP32-S31.")
    if value in _ESP32S31_SPI_FLASH_PINS:
        raise cv.Invalid(
            f"GPIO{value} is reserved for the SPI flash interface on ESP32-S31 and cannot be used."
@@ -33,6 +38,10 @@ def esp32_s31_validate_supports(value: dict[str, Any]) -> dict[str, Any]:

    if num < 0 or num > 61:
        raise cv.Invalid(f"Invalid pin number: {num} (must be 0-61)")
+    # Checked here as well so ignore_pin_validation_error cannot bypass it;
+    # these pins are not bonded and can never work
+    if num in _ESP32S31_INVALID_PINS:
+        raise cv.Invalid(f"GPIO{num} does not exist on ESP32-S31.")
    if is_input:
        # All ESP32 pins support input mode
        pass
@@ -210,8 +210,9 @@ esp_err_t CameraWebServer::streaming_handler_(struct httpd_req *req) {
    if (!image) {
      // A shutdown is not a lost frame: wait_for_image_() returns empty as soon
      // as running_ clears, and the loop condition below ends the stream anyway.
-      if (this->running_)
+      if (this->running_) {
        ESP_LOGW(TAG, "STREAM: failed to acquire frame");
+      }
      res = ESP_FAIL;
    }
    if (res == ESP_OK) {
@@ -1,12 +1,20 @@
 import logging

 import esphome.codegen as cg
+from esphome.components.noise import (
+    decode_encryption_key,
+    encryption_schema,
+    is_reserved_key,
+)
 from esphome.components.ota import BASE_OTA_SCHEMA, OTAComponent, ota_to_code
 from esphome.config_helpers import merge_config
 import esphome.config_validation as cv
 from esphome.const import (
+    CONF_API,
+    CONF_ENCRYPTION,
    CONF_ESPHOME,
    CONF_ID,
+    CONF_KEY,
    CONF_NUM_ATTEMPTS,
    CONF_OTA,
    CONF_PASSWORD,
@@ -15,6 +23,7 @@ from esphome.const import (
    CONF_REBOOT_TIMEOUT,
    CONF_SAFE_MODE,
    CONF_VERSION,
+    CONF_WEB_SERVER,
 )
 from esphome.core import CORE, coroutine_with_priority
 from esphome.coroutine import CoroPriority
@@ -22,6 +31,7 @@ import esphome.final_validate as fv
 from esphome.types import ConfigType

 CONF_ALLOW_PARTITION_ACCESS = "allow_partition_access"
+CONF_CAPTIVE_PORTAL = "captive_portal"

 _LOGGER = logging.getLogger(__name__)

@@ -30,7 +40,15 @@ CODEOWNERS = ["@esphome/core"]
 DEPENDENCIES = ["network"]


-AUTO_LOAD = ["sha256", "socket"]
+def AUTO_LOAD(config: ConfigType) -> list[str]:
+    """Auto-load noise only when encryption is configured."""
+    base = ["sha256", "socket"]
+    # A falsy config is a tooling probe for the maximal set (None from
+    # dependency resolution, {} from the components-graph platform probe);
+    # a validated config always carries defaults, never empty
+    if not config or CONF_ENCRYPTION in config:
+        return base + ["noise"]
+    return base


 esphome = cg.esphome_ns.namespace("esphome")
@@ -67,11 +85,24 @@ def ota_esphome_final_validate(config: ConfigType) -> None:
                    CONF_PASSWORD in merged_ota_esphome_configs_by_port[conf_port]
                    and CONF_PASSWORD in ota_conf
                    and merged_ota_esphome_configs_by_port[conf_port][CONF_PASSWORD]
-                    != ota_conf.get(CONF_PASSWORD)
+                    != ota_conf[CONF_PASSWORD]
                ):
                    raise cv.Invalid(
                        f"Found multiple configurations but {CONF_PASSWORD} is inconsistent"
                    )
+                # Encryption blocks conflict only when both pin a key; a bare
+                # `encryption:` (a package/device split) is compatible with a
+                # keyed one, and merge_config yields the keyed result
+                merged_key = (
+                    merged_ota_esphome_configs_by_port[conf_port]
+                    .get(CONF_ENCRYPTION, {})
+                    .get(CONF_KEY)
+                )
+                other_key = ota_conf.get(CONF_ENCRYPTION, {}).get(CONF_KEY)
+                if merged_key and other_key and merged_key != other_key:
+                    raise cv.Invalid(
+                        f"Found multiple configurations but {CONF_ENCRYPTION} is inconsistent"
+                    )

                ports_with_merged_configs.append(conf_port)
                merged_ota_esphome_configs_by_port[conf_port] = merge_config(
@@ -94,6 +125,20 @@ def ota_esphome_final_validate(config: ConfigType) -> None:

    new_ota_conf.extend(merged_ota_esphome_configs_by_port.values())

+    api_conf = full_conf.get(CONF_API) or {}
+    for ota_conf in merged_ota_esphome_configs_by_port.values():
+        # Merging same-port blocks can combine a password from one block with
+        # encryption from another; re-check the exclusion on the merged result.
+        _validate_no_password_with_encryption(ota_conf)
+        if (encryption_conf := ota_conf.get(CONF_ENCRYPTION)) is not None:
+            _resolve_encryption_key(encryption_conf, api_conf)
+    if any(
+        conf.get(CONF_PLATFORM) == CONF_WEB_SERVER for conf in full_ota_conf
+    ) and any(
+        CONF_ENCRYPTION in conf for conf in merged_ota_esphome_configs_by_port.values()
+    ):
+        _warn_web_server_ota(full_conf)
+
    full_conf[CONF_OTA] = new_ota_conf
    fv.full_config.set(full_conf)

@@ -107,6 +152,73 @@ def ota_esphome_final_validate(config: ConfigType) -> None:
        )


+def _warn_web_server_ota(full_conf: ConfigType) -> None:
+    """The web_server ota platform accepts the same image over plaintext HTTP
+    with basic auth, bypassing the encryption; warn rather than fail so the
+    operator keeps the recovery path."""
+    if CONF_CAPTIVE_PORTAL in full_conf and CONF_WEB_SERVER not in full_conf:
+        # The captive_portal auto-load: the endpoint only exists while the
+        # fallback AP is active
+        _LOGGER.warning(
+            "OTA encryption does not cover the %s OTA platform (auto-loaded "
+            "by captive_portal); the plaintext /update endpoint stays "
+            "reachable while the fallback AP is active",
+            CONF_WEB_SERVER,
+        )
+    else:
+        _LOGGER.warning(
+            "OTA encryption does not cover the %s OTA platform; its "
+            "plaintext /update endpoint accepts the same image",
+            CONF_WEB_SERVER,
+        )
+
+
+def _resolve_encryption_key(encryption_conf: ConfigType, api_conf: ConfigType) -> None:
+    """Resolve the one encryption key per device into the ota block.
+
+    An explicit ota key must match the api key, a bare block inherits it,
+    a runtime provisioned api key cannot be inherited, and the all-zeros
+    provisioning sentinel is rejected (the device treats it as no key).
+    """
+    api_key = api_conf.get(CONF_ENCRYPTION, {}).get(CONF_KEY)
+    if ota_key := encryption_conf.get(CONF_KEY):
+        if api_key and ota_key != api_key:
+            raise cv.Invalid(
+                f"'{CONF_OTA}' {CONF_ENCRYPTION} {CONF_KEY} must match the "
+                f"'{CONF_API}' {CONF_ENCRYPTION} {CONF_KEY}; omit the "
+                f"'{CONF_OTA}' {CONF_KEY} to use the '{CONF_API}' one"
+            )
+    elif not api_key:
+        if CONF_ENCRYPTION in api_conf:
+            raise cv.Invalid(
+                f"the '{CONF_API}' {CONF_ENCRYPTION} {CONF_KEY} is provisioned at "
+                f"runtime and cannot be inherited at build time; set an explicit "
+                f"'{CONF_OTA}' {CONF_ENCRYPTION} {CONF_KEY}"
+            )
+        raise cv.Invalid(
+            f"'{CONF_OTA}' {CONF_ENCRYPTION} has no {CONF_KEY} and there is no "
+            f"'{CONF_API}' {CONF_ENCRYPTION} {CONF_KEY} to inherit; set one of them"
+        )
+    else:
+        encryption_conf[CONF_KEY] = api_key
+    if is_reserved_key(encryption_conf[CONF_KEY]):
+        raise cv.Invalid(
+            f"The all-zeros {CONF_KEY} is reserved and provides no protection; "
+            f"generate a real key with: openssl rand -base64 32"
+        )
+
+
+# Also called on merged same-port configs in final validate, where schemas
+# do not run
+def _validate_no_password_with_encryption(config: ConfigType) -> ConfigType:
+    if CONF_PASSWORD in config and CONF_ENCRYPTION in config:
+        raise cv.Invalid(
+            f"'{CONF_PASSWORD}' cannot be combined with '{CONF_ENCRYPTION}'; the "
+            f"encryption key already authenticates the uploader, remove '{CONF_PASSWORD}'"
+        )
+    return config
+
+
 def _consume_ota_sockets(config: ConfigType) -> ConfigType:
    """Register socket needs for OTA component."""
    from esphome.components import socket
@@ -134,6 +246,7 @@ CONFIG_SCHEMA = cv.All(
            ): cv.port,
            cv.Optional(CONF_ALLOW_PARTITION_ACCESS, default=False): cv.boolean,
            cv.Optional(CONF_PASSWORD): cv.sensitive(),
+            cv.Optional(CONF_ENCRYPTION): encryption_schema,
            cv.Optional(CONF_NUM_ATTEMPTS): cv.invalid(
                f"'{CONF_SAFE_MODE}' (and its related configuration variables) has moved from 'ota' to its own component. See https://esphome.io/components/safe_mode"
            ),
@@ -147,12 +260,24 @@ CONFIG_SCHEMA = cv.All(
    )
    .extend(BASE_OTA_SCHEMA)
    .extend(cv.COMPONENT_SCHEMA),
+    _validate_no_password_with_encryption,
    _consume_ota_sockets,
 )

 FINAL_VALIDATE_SCHEMA = ota_esphome_final_validate


+def FILTER_SOURCE_FILES() -> list[str]:
+    """Filter out the noise transport when no ota entry configures encryption."""
+    for ota_conf in CORE.config.get(CONF_OTA, []):
+        if (
+            ota_conf.get(CONF_PLATFORM) == CONF_ESPHOME
+            and ota_conf.get(CONF_ENCRYPTION) is not None
+        ):
+            return []
+    return ["ota_esphome_noise.cpp"]
+
+
@coroutine_with_priority(CoroPriority.OTA_UPDATES)
 async def to_code(config: ConfigType) -> None:
    var = cg.new_Pvariable(config[CONF_ID])
@@ -171,6 +296,12 @@ async def to_code(config: ConfigType) -> None:
    if config.get(CONF_ALLOW_PARTITION_ACCESS):
        cg.add_define("USE_OTA_PARTITIONS")

+    if (encryption_conf := config.get(CONF_ENCRYPTION)) is not None:
+        # A missing key was resolved from the api component in final validate.
+        key = encryption_conf[CONF_KEY]
+        cg.add_define("USE_OTA_ENCRYPTION")
+        cg.add(var.set_noise_psk(list(decode_encryption_key(key))))
+
    # Build flag so lwip_fast_select.c (a .c file that can't include defines.h) sees it.
    cg.add_build_flag("-DUSE_OTA_PLATFORM_ESPHOME")

@@ -27,7 +27,6 @@ namespace esphome {

 static const char *const TAG = "esphome.ota";
 static constexpr uint16_t OTA_BLOCK_SIZE = 8192;
-static constexpr size_t OTA_BUFFER_SIZE = 1024;                  // buffer size for OTA data transfer
 static constexpr uint32_t OTA_SOCKET_TIMEOUT_HANDSHAKE = 20000;  // milliseconds for initial handshake
 static constexpr uint32_t OTA_SOCKET_TIMEOUT_DATA = 90000;       // milliseconds for data transfer

@@ -105,6 +104,11 @@ void ESPHomeOTAComponent::dump_config() {
    ESP_LOGCONFIG(TAG, "  Password configured");
  }
 #endif
+#ifdef USE_OTA_ENCRYPTION
+  if (this->noise_ctx_.has_psk()) {
+    ESP_LOGCONFIG(TAG, "  Encryption configured");
+  }
+#endif
 #ifdef USE_OTA_PARTITIONS
  ESP_LOGCONFIG(TAG,
                "  Partition access allowed\n"
@@ -128,7 +132,8 @@ void ESPHomeOTAComponent::dump_config() {
  esp_partition_iterator_release(it);
  esp_bootloader_desc_t bootloader_desc;
  esp_err_t err = esp_ota_get_bootloader_description(nullptr, &bootloader_desc);
-  ESP_LOGCONFIG(TAG, "  Bootloader: ESP-IDF %s", (err == ESP_OK) ? bootloader_desc.idf_ver : "version unknown");
+  ESP_LOGCONFIG(TAG, "  Bootloader: ESP-IDF %s",
+                (err == ESP_OK) ? bootloader_desc.idf_ver : LOG_STR_LITERAL("version unknown"));
 #endif  // USE_ESP32
 #endif  // USE_OTA_PARTITIONS
 }
@@ -148,8 +153,10 @@ void ESPHomeOTAComponent::loop() {
 static constexpr uint8_t CLIENT_FEATURE_SUPPORTS_COMPRESSION = 0x01;
 static constexpr uint8_t CLIENT_FEATURE_SUPPORTS_SHA256_AUTH = 0x02;
 static constexpr uint8_t CLIENT_FEATURE_SUPPORTS_EXTENDED_PROTOCOL = 0x04;
+static constexpr uint8_t CLIENT_FEATURE_SUPPORTS_NOISE = 0x08;
 static constexpr uint8_t SERVER_FEATURE_SUPPORTS_COMPRESSION = 0x01;
 static constexpr uint8_t SERVER_FEATURE_SUPPORTS_PARTITION_ACCESS = 0x02;
+static constexpr uint8_t SERVER_FEATURE_SUPPORTS_NOISE = 0x04;

 void ESPHomeOTAComponent::handle_handshake_() {
  /// Handle the OTA handshake and authentication.
@@ -201,8 +208,7 @@ void ESPHomeOTAComponent::handle_handshake_() {
      }

      // Validate magic bytes
-      static const uint8_t MAGIC_BYTES[5] = {0x6C, 0x26, 0xF7, 0x5C, 0x45};
-      if (memcmp(this->handshake_buf_, MAGIC_BYTES, 5) != 0) {
+      if (memcmp(this->handshake_buf_, MAGIC_BYTES, sizeof(MAGIC_BYTES)) != 0) {
        ESP_LOGW(TAG, "Magic bytes mismatch! 0x%02X-0x%02X-0x%02X-0x%02X-0x%02X", this->handshake_buf_[0],
                 this->handshake_buf_[1], this->handshake_buf_[2], this->handshake_buf_[3], this->handshake_buf_[4]);
        this->send_error_and_cleanup_(ota::OTA_RESPONSE_ERROR_MAGIC);
@@ -234,6 +240,19 @@ void ESPHomeOTAComponent::handle_handshake_() {
      }
      this->ota_features_ = this->handshake_buf_[0];
      ESP_LOGV(TAG, "Features: 0x%02X", this->ota_features_);
+
+#ifdef USE_OTA_ENCRYPTION
+      // Fail closed: with a PSK configured the client must negotiate encryption
+      // (which requires the extended protocol); refuse plaintext uploads.
+      static constexpr uint8_t NOISE_REQUIRED_FEATURES =
+          CLIENT_FEATURE_SUPPORTS_NOISE | CLIENT_FEATURE_SUPPORTS_EXTENDED_PROTOCOL;
+      if (this->noise_ctx_.has_psk() && (this->ota_features_ & NOISE_REQUIRED_FEATURES) != NOISE_REQUIRED_FEATURES) {
+        ESP_LOGW(TAG, "Client does not support encryption");
+        this->send_error_and_cleanup_(ota::OTA_RESPONSE_ERROR_ENCRYPTION_REQUIRED);
+        return;
+      }
+#endif
+
      this->transition_ota_state_(OTAState::FEATURE_ACK);

      const bool supports_compression =
@@ -249,6 +268,11 @@ void ESPHomeOTAComponent::handle_handshake_() {
        this->handshake_buf_[1] = (supports_compression ? SERVER_FEATURE_SUPPORTS_COMPRESSION : 0);
 #ifdef USE_OTA_PARTITIONS
        this->handshake_buf_[1] |= SERVER_FEATURE_SUPPORTS_PARTITION_ACCESS;
+#endif
+#ifdef USE_OTA_ENCRYPTION
+        if (this->noise_ctx_.has_psk()) {
+          this->handshake_buf_[1] |= SERVER_FEATURE_SUPPORTS_NOISE;
+        }
 #endif
      } else {
        this->handshake_buf_[0] =
@@ -264,6 +288,20 @@ void ESPHomeOTAComponent::handle_handshake_() {
      if (!this->try_write_(ack_size, LOG_STR("ack feature"))) {
        return;
      }
+#ifdef USE_OTA_ENCRYPTION
+      // With a PSK configured the rest of the session runs inside the noise
+      // transport; the client sends the first handshake frame next, so there
+      // is nothing to do until data arrives.
+      if (this->noise_ctx_.has_psk()) {
+        // handshake_buf_ still holds the feature ack composed above; a
+        // would-block re-entry lands here without rebuilding it
+        if (!this->noise_start_session_(this->handshake_buf_[1])) {
+          return;
+        }
+        this->transition_ota_state_(OTAState::NOISE_HANDSHAKE);
+        return;
+      }
+#endif
 #ifdef USE_OTA_PASSWORD
      // If password is set, move to auth phase
      if (!this->password_.empty()) {
@@ -301,6 +339,16 @@ void ESPHomeOTAComponent::handle_handshake_() {
      this->handle_data_();
      return;

+#ifdef USE_OTA_ENCRYPTION
+    case OTAState::NOISE_HANDSHAKE:
+      if (!this->handle_noise_handshake_()) {
+        return;
+      }
+      this->transition_ota_state_(OTAState::DATA);
+      this->handle_data_();
+      return;
+#endif
+
    default:
      break;
  }
@@ -339,6 +387,8 @@ void ESPHomeOTAComponent::handle_data_() {
  ///   Raw TCP (8266, RP2040):  setblocking is no-op; SO_RCVTIMEO uses
  ///                            wakeable_delay() in read();
  ///                            write() always returns immediately
+  // Backend calls overwrite this with OK; reset to UNKNOWN before any
+  // goto error that follows a successful begin()/write()
  ota::OTAResponseTypes error_code = ota::OTA_RESPONSE_ERROR_UNKNOWN;
  size_t total = 0;
  uint32_t last_progress = 0;
@@ -360,11 +410,11 @@ void ESPHomeOTAComponent::handle_data_() {
  this->client_->setblocking(true);

  // Acknowledge auth OK - 1 byte
-  this->write_byte_(ota::OTA_RESPONSE_AUTH_OK);
+  this->data_write_byte_(ota::OTA_RESPONSE_AUTH_OK);

  if (this->extended_proto_) {
    // Read ota type, 1 byte
-    if (!this->readall_(buf, 1)) {
+    if (!this->data_readall_(buf, 1)) {
      this->log_read_error_(LOG_STR("OTA type"));
      goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
    }
@@ -373,7 +423,7 @@ void ESPHomeOTAComponent::handle_data_() {
  ESP_LOGV(TAG, "OTA type is 0x%02x", ota_type);

  // Read size, 4 bytes MSB first
-  if (!this->readall_(buf, 4)) {
+  if (!this->data_readall_(buf, 4)) {
    this->log_read_error_(LOG_STR("size"));
    goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
  }
@@ -404,11 +454,12 @@ void ESPHomeOTAComponent::handle_data_() {
    goto error;  // NOLINT(cppcoreguidelines-avoid-goto)

  // Acknowledge prepare OK - 1 byte
-  this->write_byte_(ota::OTA_RESPONSE_UPDATE_PREPARE_OK);
+  this->data_write_byte_(ota::OTA_RESPONSE_UPDATE_PREPARE_OK);

  // Read binary MD5, 32 bytes
-  if (!this->readall_(buf, 32)) {
+  if (!this->data_readall_(buf, 32)) {
    this->log_read_error_(LOG_STR("MD5 checksum"));
+    error_code = ota::OTA_RESPONSE_ERROR_UNKNOWN;
    goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
  }
  sbuf[32] = '\0';
@@ -416,7 +467,7 @@ void ESPHomeOTAComponent::handle_data_() {
  this->backend_->set_update_md5(sbuf);

  // Acknowledge MD5 OK - 1 byte
-  this->write_byte_(ota::OTA_RESPONSE_BIN_MD5_OK);
+  this->data_write_byte_(ota::OTA_RESPONSE_BIN_MD5_OK);

  // Track when we last received data so a silently-vanished peer (no FIN/RST
  // delivered, e.g. uploader killed mid-transfer or NAT/router dropped state)
@@ -432,19 +483,35 @@ void ESPHomeOTAComponent::handle_data_() {
    }
    size_t remaining = ota_size - total;
    size_t requested = remaining < OTA_BUFFER_SIZE ? remaining : OTA_BUFFER_SIZE;
-    ssize_t read = this->client_->read(buf, requested);
-    if (read == -1) {
-      const int err = errno;
-      if (this->would_block_(err)) {
-        // read() already waited up to SO_RCVTIMEO for data, just feed WDT
-        App.feed_wdt();
-        continue;
+    ssize_t read;
+#ifdef USE_OTA_ENCRYPTION
+    if (this->noise_ != nullptr) {
+      // One frame per call; noise_read_data_ waits internally (readall_), so
+      // there is no would-block retry here and failures are already logged.
+      read = this->noise_read_data_(buf, requested);
+      if (read <= 0) {
+        error_code = ota::OTA_RESPONSE_ERROR_UNKNOWN;
+        goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
+      }
+    } else
+#endif
+    {
+      read = this->client_->read(buf, requested);
+      if (read == -1) {
+        const int err = errno;
+        if (this->would_block_(err)) {
+          // read() already waited up to SO_RCVTIMEO for data, just feed WDT
+          App.feed_wdt();
+          continue;
+        }
+        ESP_LOGW(TAG, "Read err %d", err);
+        error_code = ota::OTA_RESPONSE_ERROR_UNKNOWN;
+        goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
+      } else if (read == 0) {
+        ESP_LOGW(TAG, "Remote closed");
+        error_code = ota::OTA_RESPONSE_ERROR_UNKNOWN;
+        goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
      }
-      ESP_LOGW(TAG, "Read err %d", err);
-      goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
-    } else if (read == 0) {
-      ESP_LOGW(TAG, "Remote closed");
-      goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
    }

    last_data_ms = millis();
@@ -456,7 +523,7 @@ void ESPHomeOTAComponent::handle_data_() {
    total += read;
 #if USE_OTA_VERSION == 2
    while (size_acknowledged + OTA_BLOCK_SIZE <= total || (total == ota_size && size_acknowledged < ota_size)) {
-      this->write_byte_(ota::OTA_RESPONSE_CHUNK_OK);
+      this->data_write_byte_(ota::OTA_RESPONSE_CHUNK_OK);
      size_acknowledged += OTA_BLOCK_SIZE;
    }
 #endif
@@ -475,7 +542,7 @@ void ESPHomeOTAComponent::handle_data_() {
  }

  // Acknowledge receive OK - 1 byte
-  this->write_byte_(ota::OTA_RESPONSE_RECEIVE_OK);
+  this->data_write_byte_(ota::OTA_RESPONSE_RECEIVE_OK);

  error_code = this->backend_->end();
  if (error_code != ota::OTA_RESPONSE_OK) {
@@ -484,10 +551,10 @@ void ESPHomeOTAComponent::handle_data_() {
  }

  // Acknowledge Update end OK - 1 byte
-  this->write_byte_(ota::OTA_RESPONSE_UPDATE_END_OK);
+  this->data_write_byte_(ota::OTA_RESPONSE_UPDATE_END_OK);

  // Read ACK
-  if (!this->readall_(buf, 1) || buf[0] != ota::OTA_RESPONSE_OK) {
+  if (!this->data_readall_(buf, 1) || buf[0] != ota::OTA_RESPONSE_OK) {
    this->log_read_error_(LOG_STR("ack"));
    // do not go to error, this is not fatal
  }
@@ -510,7 +577,7 @@ void ESPHomeOTAComponent::handle_data_() {
  App.safe_reboot();

 error:
-  this->write_byte_(static_cast<uint8_t>(error_code));
+  this->data_write_byte_(static_cast<uint8_t>(error_code));

  // Abort backend before cleanup - cleanup_connection_() destroys the backend.
  // Always call abort() unconditionally: backends register external partitions before
@@ -677,6 +744,9 @@ void ESPHomeOTAComponent::cleanup_connection_() {
  this->backend_ = nullptr;
 #ifdef USE_OTA_PASSWORD
  this->cleanup_auth_();
+#endif
+#ifdef USE_OTA_ENCRYPTION
+  this->noise_ = nullptr;
 #endif
  // Intentionally no disable_loop() — letting loop() run one more iteration catches
  // any connection that queued on the listener mid-session (otherwise the wake flag,
@@ -4,6 +4,9 @@
 #ifdef USE_OTA
 #include "esphome/components/ota/ota_backend_factory.h"
 #include "esphome/components/socket/socket.h"
+#ifdef USE_OTA_ENCRYPTION
+#include "esphome/components/noise/noise_handshake.h"
+#endif
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 #include "esphome/core/preferences.h"
@@ -24,7 +27,10 @@ class ESPHomeOTAComponent final : public ota::OTAComponent {
    AUTH_SEND,  // Sending authentication request
    AUTH_READ,  // Reading authentication data
 #endif          // USE_OTA_PASSWORD
-    DATA,       // BLOCKING! Processing OTA data (update, etc.)
+#ifdef USE_OTA_ENCRYPTION
+    NOISE_HANDSHAKE,  // Exchanging Noise handshake frames
+#endif
+    DATA,  // BLOCKING! Processing OTA data (update, etc.)
  };
 #ifdef USE_OTA_PASSWORD
  void set_auth_password(const std::string &password) { password_ = password; }
@@ -38,6 +44,10 @@ class ESPHomeOTAComponent final : public ota::OTAComponent {
  }
 #endif  // USE_OTA_PASSWORD

+#ifdef USE_OTA_ENCRYPTION
+  void set_noise_psk(noise::psk_t psk) { this->noise_ctx_.set_psk(psk); }
+#endif
+
  /// Manually set the port OTA should listen on
  void set_port(uint16_t port) { this->port_ = port; }

@@ -63,6 +73,48 @@ class ESPHomeOTAComponent final : public ota::OTAComponent {
  bool writeall_(const uint8_t *buf, size_t len);
  inline bool write_byte_(uint8_t byte) { return this->writeall_(&byte, 1); }

+#ifdef USE_OTA_ENCRYPTION
+  // Heap-allocated only while an encrypted OTA session is active.
+  struct NoiseSession {
+    ~NoiseSession();
+    noise::NoiseResponderHandshake handshake;
+    NoiseCipherState *send_cipher{nullptr};
+    NoiseCipherState *recv_cipher{nullptr};
+    uint16_t frame_len{0};  // total frame size once the header is parsed, 0 until then
+    uint16_t frame_pos{0};  // bytes read or written so far
+    bool writing{false};    // a produced handshake frame is still being flushed
+    uint8_t frame_buf[noise::FRAME_HEADER_SIZE + 1 + noise::MAX_HANDSHAKE_SIZE];
+  };
+  bool noise_start_session_(uint8_t server_feature_flags);
+  bool handle_noise_handshake_();
+  bool noise_try_read_frame_();
+  bool noise_try_write_frame_();
+  void noise_send_reject_(const LogString *reason);
+  ssize_t noise_decrypt_(uint8_t *buf, size_t len);
+  ssize_t noise_read_frame_blocking_(uint8_t *buf, size_t min_ciphertext, size_t max_ciphertext);
+  bool noise_readall_(uint8_t *buf, size_t len);
+  ssize_t noise_read_data_(uint8_t *buf, size_t capacity);
+  bool noise_write_byte_(uint8_t byte);
+#endif  // USE_OTA_ENCRYPTION
+
+  // Data-phase I/O dispatch: through the noise transport when a session is
+  // active, straight to the socket otherwise.
+  inline bool data_write_byte_(uint8_t byte) {
+#ifdef USE_OTA_ENCRYPTION
+    if (this->noise_ != nullptr)
+      return this->noise_write_byte_(byte);
+#endif
+    return this->write_byte_(byte);
+  }
+  // When encrypted, buf must have room for len + noise::MAC_SIZE bytes.
+  inline bool data_readall_(uint8_t *buf, size_t len) {
+#ifdef USE_OTA_ENCRYPTION
+    if (this->noise_ != nullptr)
+      return this->noise_readall_(buf, len);
+#endif
+    return this->readall_(buf, len);
+  }
+
  bool try_read_(size_t to_read, const LogString *desc);
  bool try_write_(size_t to_write, const LogString *desc);

@@ -91,6 +143,10 @@ class ESPHomeOTAComponent final : public ota::OTAComponent {
  std::string password_;
  std::unique_ptr<uint8_t[]> auth_buf_;
 #endif  // USE_OTA_PASSWORD
+#ifdef USE_OTA_ENCRYPTION
+  noise::NoiseContext noise_ctx_;
+  std::unique_ptr<NoiseSession> noise_;
+#endif  // USE_OTA_ENCRYPTION

  socket::ListenSocket *server_{nullptr};
  std::unique_ptr<socket::Socket> client_;
@@ -98,6 +154,18 @@ class ESPHomeOTAComponent final : public ota::OTAComponent {

  uint32_t client_connect_time_{0};
  static constexpr size_t HANDSHAKE_BUF_SIZE = 5;
+  // Buffer size for OTA data transfer. The upload client derives its maximum
+  // encrypted frame plaintext from this (espota2.NOISE_MAX_PLAINTEXT is this
+  // minus the 16-byte MAC); both must change together.
+  static constexpr size_t OTA_BUFFER_SIZE = 1040;
+#ifdef USE_OTA_ENCRYPTION
+  // espota2.NOISE_MAX_PLAINTEXT; shrinking the buffer would reject every
+  // frame a current CLI sends
+  static constexpr size_t NOISE_CLIENT_MAX_PLAINTEXT = 1024;
+  static_assert(OTA_BUFFER_SIZE >= NOISE_CLIENT_MAX_PLAINTEXT + noise::MAC_SIZE,
+                "OTA_BUFFER_SIZE must fit a full encrypted data frame");
+#endif
+  static constexpr uint8_t MAGIC_BYTES[5] = {0x6C, 0x26, 0xF7, 0x5C, 0x45};
 #ifdef USE_OTA_PARTITIONS
  uint32_t running_app_offset_{0};
  size_t running_app_size_{0};
@@ -0,0 +1,279 @@
+#include "ota_esphome.h"
+#ifdef USE_OTA
+#ifdef USE_OTA_ENCRYPTION
+#include "esphome/components/noise/noise.h"
+#include "esphome/components/ota/ota_backend.h"
+#include "esphome/core/log.h"
+
+#include <cstring>
+#include <new>
+
+#ifdef USE_ESP8266
+#include <pgmspace.h>
+#endif
+
+namespace esphome {
+
+static const char *const TAG = "esphome.ota";
+
+#ifdef USE_ESP8266
+static constexpr char OTA_NOISE_PROLOGUE_INIT[] PROGMEM = "NoiseOTAInit";
+#else
+static constexpr char OTA_NOISE_PROLOGUE_INIT[] = "NoiseOTAInit";
+#endif
+static constexpr size_t OTA_NOISE_PROLOGUE_INIT_LEN = sizeof(OTA_NOISE_PROLOGUE_INIT) - 1;
+
+ESPHomeOTAComponent::NoiseSession::~NoiseSession() {
+  if (this->send_cipher != nullptr) {
+    noise_cipherstate_free(this->send_cipher);
+  }
+  if (this->recv_cipher != nullptr) {
+    noise_cipherstate_free(this->recv_cipher);
+  }
+}
+
+/** Allocate the session and start the responder handshake.
+ *
+ * The prologue binds the whole plaintext preamble, so any tampering with the
+ * negotiation (a stripped feature flag, a changed version) breaks the first
+ * handshake MAC on either side:
+ *   "NoiseOTAInit" | magic(5) | OK,version | client_features | FEATURE_FLAGS,server_flags
+ */
+bool ESPHomeOTAComponent::noise_start_session_(uint8_t server_feature_flags) {
+  // NOLINTNEXTLINE(clang-analyzer-cplusplus.NewDeleteLeaks)
+  this->noise_ = std::unique_ptr<NoiseSession>(new (std::nothrow) NoiseSession());
+  if (this->noise_ == nullptr) {
+    ESP_LOGW(TAG, "Session allocation failed");
+    this->cleanup_connection_();
+    return false;
+  }
+
+  static constexpr size_t PROLOGUE_ACK_LEN = 2;  // OTA_RESPONSE_OK + version
+  static constexpr size_t PROLOGUE_CLIENT_FEATURES_LEN = 1;
+  static constexpr size_t PROLOGUE_FEATURE_ACK_LEN = 2;  // OTA_RESPONSE_FEATURE_FLAGS + server flags
+  uint8_t prologue[OTA_NOISE_PROLOGUE_INIT_LEN + sizeof(MAGIC_BYTES) + PROLOGUE_ACK_LEN + PROLOGUE_CLIENT_FEATURES_LEN +
+                   PROLOGUE_FEATURE_ACK_LEN];
+#ifdef USE_ESP8266
+  memcpy_P(prologue, OTA_NOISE_PROLOGUE_INIT, OTA_NOISE_PROLOGUE_INIT_LEN);
+#else
+  std::memcpy(prologue, OTA_NOISE_PROLOGUE_INIT, OTA_NOISE_PROLOGUE_INIT_LEN);
+#endif
+  uint8_t *p = prologue + OTA_NOISE_PROLOGUE_INIT_LEN;
+  // Magic bytes, already validated in MAGIC_READ
+  std::memcpy(p, MAGIC_BYTES, sizeof(MAGIC_BYTES));
+  p += sizeof(MAGIC_BYTES);
+  // Our magic ack
+  *p++ = ota::OTA_RESPONSE_OK;
+  *p++ = USE_OTA_VERSION;
+  // The feature byte the client sent
+  *p++ = this->ota_features_;
+  // The feature ack we sent (noise requires the extended protocol)
+  *p++ = ota::OTA_RESPONSE_FEATURE_FLAGS;
+  *p++ = server_feature_flags;
+
+  int err = this->noise_->handshake.init(this->noise_ctx_.get_psk(), prologue, sizeof(prologue));
+  if (err != 0) {
+    ESP_LOGW(TAG, "Handshake init: %s", LOG_STR_ARG(noise::noise_err_to_logstr(err)));
+    this->cleanup_connection_();
+    return false;
+  }
+  return true;
+}
+
+/** Drive the non-blocking handshake from loop(); returns true once the
+ * transport ciphers are ready. A would-block returns false and the next
+ * loop() resumes from the NoiseSession cursors; on failure the connection
+ * is cleaned up.
+ */
+bool ESPHomeOTAComponent::handle_noise_handshake_() {
+  NoiseSession &s = *this->noise_;
+  while (true) {
+    if (s.writing) {
+      if (!this->noise_try_write_frame_()) {
+        return false;  // would block, or errored and cleaned up
+      }
+      s.writing = false;
+      s.frame_pos = 0;
+      s.frame_len = 0;
+    }
+    switch (s.handshake.action()) {
+      case noise::NoiseResponderHandshake::Action::ACTION_READ: {
+        if (!this->noise_try_read_frame_()) {
+          return false;
+        }
+        const uint16_t payload_len = s.frame_len - noise::FRAME_HEADER_SIZE;
+        s.frame_pos = 0;
+        s.frame_len = 0;
+        if (s.frame_buf[noise::FRAME_HEADER_SIZE] != noise::HANDSHAKE_STATUS_OK) {
+          ESP_LOGW(TAG, "Bad handshake error byte: %u", s.frame_buf[noise::FRAME_HEADER_SIZE]);
+          this->cleanup_connection_();
+          return false;
+        }
+        int err = s.handshake.read_message(s.frame_buf + noise::FRAME_HEADER_SIZE + 1, payload_len - 1);
+        if (err != 0) {
+          ESP_LOGW(TAG, "Handshake read: %s", LOG_STR_ARG(noise::noise_err_to_logstr(err)));
+          this->noise_send_reject_(noise::reject_reason_for(err));
+          this->cleanup_connection_();
+          return false;
+        }
+        break;
+      }
+      case noise::NoiseResponderHandshake::Action::ACTION_WRITE: {
+        size_t msg_len = 0;
+        int err =
+            s.handshake.write_message(s.frame_buf + noise::FRAME_HEADER_SIZE + 1, noise::MAX_HANDSHAKE_SIZE, msg_len);
+        if (err != 0) {
+          ESP_LOGW(TAG, "Handshake write: %s", LOG_STR_ARG(noise::noise_err_to_logstr(err)));
+          this->cleanup_connection_();
+          return false;
+        }
+        const uint16_t payload_len = msg_len + 1;
+        noise::write_frame_header(s.frame_buf, payload_len);
+        s.frame_buf[noise::FRAME_HEADER_SIZE] = noise::HANDSHAKE_STATUS_OK;
+        s.frame_len = noise::FRAME_HEADER_SIZE + payload_len;
+        s.frame_pos = 0;
+        s.writing = true;
+        break;
+      }
+      case noise::NoiseResponderHandshake::Action::ACTION_SPLIT: {
+        int err = s.handshake.split(s.send_cipher, s.recv_cipher);
+        if (err != 0) {
+          ESP_LOGW(TAG, "Handshake split: %s", LOG_STR_ARG(noise::noise_err_to_logstr(err)));
+          this->cleanup_connection_();
+          return false;
+        }
+        ESP_LOGD(TAG, "Noise handshake complete");
+        return true;
+      }
+      default: {
+        ESP_LOGW(TAG, "Bad handshake state");
+        this->cleanup_connection_();
+        return false;
+      }
+    }
+  }
+}
+
+/// Non-blocking read of one handshake frame into the session buffer.
+bool ESPHomeOTAComponent::noise_try_read_frame_() {
+  NoiseSession &s = *this->noise_;
+  while (s.frame_pos < noise::FRAME_HEADER_SIZE) {
+    ssize_t read = this->client_->read(s.frame_buf + s.frame_pos, noise::FRAME_HEADER_SIZE - s.frame_pos);
+    if (!this->handle_read_error_(read, LOG_STR("read noise header"))) {
+      return false;
+    }
+    s.frame_pos += read;
+  }
+  if (s.frame_len == 0) {
+    const uint16_t payload_len = encode_uint16(s.frame_buf[1], s.frame_buf[2]);
+    if (s.frame_buf[0] != noise::FRAME_INDICATOR || payload_len < 1 || payload_len > 1 + noise::MAX_HANDSHAKE_SIZE) {
+      ESP_LOGW(TAG, "Bad handshake frame: 0x%02X, %u bytes", s.frame_buf[0], payload_len);
+      this->cleanup_connection_();
+      return false;
+    }
+    s.frame_len = noise::FRAME_HEADER_SIZE + payload_len;
+  }
+  while (s.frame_pos < s.frame_len) {
+    ssize_t read = this->client_->read(s.frame_buf + s.frame_pos, s.frame_len - s.frame_pos);
+    if (!this->handle_read_error_(read, LOG_STR("read noise frame"))) {
+      return false;
+    }
+    s.frame_pos += read;
+  }
+  return true;
+}
+
+/// Non-blocking write of the pending session-buffer frame.
+bool ESPHomeOTAComponent::noise_try_write_frame_() {
+  NoiseSession &s = *this->noise_;
+  while (s.frame_pos < s.frame_len) {
+    ssize_t written = this->client_->write(s.frame_buf + s.frame_pos, s.frame_len - s.frame_pos);
+    if (!this->handle_write_error_(written, LOG_STR("write noise frame"))) {
+      return false;
+    }
+    s.frame_pos += written;
+  }
+  return true;
+}
+
+/// Best-effort explicit reject frame so the client can log a readable reason.
+void ESPHomeOTAComponent::noise_send_reject_(const LogString *reason) {
+  // Every reason here comes from noise::reject_reason_for(), so the exported
+  // floor is the exact capacity needed
+  uint8_t data[noise::FRAME_HEADER_SIZE + noise::MAC_FAILURE_PAYLOAD_SIZE];
+  const size_t payload_len =
+      noise::format_reject_payload(data + noise::FRAME_HEADER_SIZE, sizeof(data) - noise::FRAME_HEADER_SIZE, reason);
+  noise::write_frame_header(data, payload_len);
+  this->client_->write(data, noise::FRAME_HEADER_SIZE + payload_len);  // Best effort, non-blocking
+}
+
+/// Decrypt a ciphertext in place; returns the plaintext size or -1.
+ssize_t ESPHomeOTAComponent::noise_decrypt_(uint8_t *buf, size_t len) {
+  NoiseBuffer mbuf;
+  noise_buffer_init(mbuf);
+  noise_buffer_set_inout(mbuf, buf, len, len);
+  int err = noise_cipherstate_decrypt(this->noise_->recv_cipher, &mbuf);
+  if (err != 0) {
+    ESP_LOGW(TAG, "Decrypt: %s", LOG_STR_ARG(noise::noise_err_to_logstr(err)));
+    return -1;
+  }
+  return mbuf.size;
+}
+
+/** Blocking read of one frame whose ciphertext size must be within the given
+ * bounds, decrypted in place; returns the plaintext size, or -1 on error.
+ * buf needs max_ciphertext capacity.
+ */
+ssize_t ESPHomeOTAComponent::noise_read_frame_blocking_(uint8_t *buf, size_t min_ciphertext, size_t max_ciphertext) {
+  uint8_t header[noise::FRAME_HEADER_SIZE];
+  if (!this->readall_(header, sizeof(header))) {
+    return -1;
+  }
+  const size_t ciphertext_len = encode_uint16(header[1], header[2]);
+  if (header[0] != noise::FRAME_INDICATOR || ciphertext_len < min_ciphertext || ciphertext_len > max_ciphertext) {
+    ESP_LOGW(TAG, "Bad frame: 0x%02X, %zu bytes", header[0], ciphertext_len);
+    return -1;
+  }
+  if (!this->readall_(buf, ciphertext_len)) {
+    return -1;
+  }
+  return this->noise_decrypt_(buf, ciphertext_len);
+}
+
+/** Blocking read of one frame whose plaintext must be exactly len bytes
+ * (control units are one unit per frame). buf needs len + noise::MAC_SIZE
+ * capacity; the plaintext lands at buf[0..len).
+ */
+bool ESPHomeOTAComponent::noise_readall_(uint8_t *buf, size_t len) {
+  return this->noise_read_frame_blocking_(buf, len + noise::MAC_SIZE, len + noise::MAC_SIZE) == (ssize_t) len;
+}
+
+/** Blocking read of one data-phase frame, decrypted in place; returns the
+ * plaintext size, or -1 on error. buf is the OTA_BUFFER_SIZE data buffer.
+ * The ciphertext must fit that buffer and its plaintext must fit what the
+ * caller accepts (the remaining image bytes).
+ */
+ssize_t ESPHomeOTAComponent::noise_read_data_(uint8_t *buf, size_t capacity) {
+  const size_t max_ciphertext = std::min(capacity + noise::MAC_SIZE, OTA_BUFFER_SIZE);
+  return this->noise_read_frame_blocking_(buf, noise::MAC_SIZE + 1, max_ciphertext);
+}
+
+/// Blocking write of one response byte as an encrypted frame.
+bool ESPHomeOTAComponent::noise_write_byte_(uint8_t byte) {
+  uint8_t frame[noise::FRAME_HEADER_SIZE + 1 + noise::MAC_SIZE];
+  frame[noise::FRAME_HEADER_SIZE] = byte;
+  NoiseBuffer mbuf;
+  noise_buffer_init(mbuf);
+  noise_buffer_set_inout(mbuf, frame + noise::FRAME_HEADER_SIZE, 1, 1 + noise::MAC_SIZE);
+  int err = noise_cipherstate_encrypt(this->noise_->send_cipher, &mbuf);
+  if (err != 0) {
+    ESP_LOGW(TAG, "Encrypt: %s", LOG_STR_ARG(noise::noise_err_to_logstr(err)));
+    return false;
+  }
+  noise::write_frame_header(frame, mbuf.size);
+  return this->writeall_(frame, noise::FRAME_HEADER_SIZE + mbuf.size);
+}
+
+}  // namespace esphome
+#endif  // USE_OTA_ENCRYPTION
+#endif  // USE_OTA
@@ -334,8 +334,9 @@ void Fan::dump_traits_(const char *tag, const char *prefix) {
  }
  if (traits.supports_preset_modes()) {
    ESP_LOGCONFIG(tag, "%s  Supported presets:", prefix);
-    for (const char *s : traits.supported_preset_modes())
+    for (const char *s : traits.supported_preset_modes()) {
      ESP_LOGCONFIG(tag, "%s    - %s", prefix, s);
+    }
  }
 }

@@ -93,7 +93,8 @@ void FeedbackCover::set_open_sensor(binary_sensor::BinarySensor *open_feedback)

  // setup callbacks to react to sensor changes
  open_feedback->add_on_state_callback([this](bool state) {
-    ESP_LOGD(TAG, "'%s' - Open feedback '%s'.", this->name_.c_str(), state ? "STARTED" : "ENDED");
+    ESP_LOGD(TAG, "'%s' - Open feedback '%s'.", this->name_.c_str(),
+             state ? LOG_STR_LITERAL("STARTED") : LOG_STR_LITERAL("ENDED"));
    this->recompute_position_();
    if (!state && this->infer_endstop_ && this->current_trigger_operation_ == COVER_OPERATION_OPENING) {
      this->endstop_reached_(true);
@@ -106,7 +107,8 @@ void FeedbackCover::set_close_sensor(binary_sensor::BinarySensor *close_feedback
  this->close_feedback_ = close_feedback;

  close_feedback->add_on_state_callback([this](bool state) {
-    ESP_LOGD(TAG, "'%s' - Close feedback '%s'.", this->name_.c_str(), state ? "STARTED" : "ENDED");
+    ESP_LOGD(TAG, "'%s' - Close feedback '%s'.", this->name_.c_str(),
+             state ? LOG_STR_LITERAL("STARTED") : LOG_STR_LITERAL("ENDED"));
    this->recompute_position_();
    if (!state && this->infer_endstop_ && this->current_trigger_operation_ == COVER_OPERATION_CLOSING) {
      this->endstop_reached_(false);
@@ -144,7 +146,8 @@ void FeedbackCover::endstop_reached_(bool open_endstop) {
  // from a position slightly past the endpoint
  if (this->current_trigger_operation_ == (open_endstop ? COVER_OPERATION_OPENING : COVER_OPERATION_CLOSING)) {
    float dur = (now - this->start_dir_time_) / 1e3f;
-    ESP_LOGD(TAG, "'%s' - %s endstop reached. Took %.1fs.", this->name_.c_str(), open_endstop ? "Open" : "Close", dur);
+    ESP_LOGD(TAG, "'%s' - %s endstop reached. Took %.1fs.", this->name_.c_str(),
+             open_endstop ? LOG_STR_LITERAL("Open") : LOG_STR_LITERAL("Close"), dur);

    // if there is no external mechanism, stop the cover
    if (!this->has_built_in_endstop_) {
@@ -366,7 +369,7 @@ void FeedbackCover::start_direction_(CoverOperation dir) {
  // the case when an obstacle appears while moving is handled in the callback
  if (obstacle != nullptr && obstacle->state) {
    ESP_LOGD(TAG, "'%s' - %s obstacle detected. Action not started.", this->name_.c_str(),
-             dir == COVER_OPERATION_OPENING ? "Open" : "Close");
+             dir == COVER_OPERATION_OPENING ? LOG_STR_LITERAL("Open") : LOG_STR_LITERAL("Close"));
    return;
  }
 #endif
@@ -383,9 +386,9 @@ void FeedbackCover::start_direction_(CoverOperation dir) {
    this->set_current_operation_(dir, true);
    this->prev_command_trigger_ = trig;
    ESP_LOGD(TAG, "'%s' - Firing '%s' trigger.", this->name_.c_str(),
-             dir == COVER_OPERATION_OPENING   ? "OPEN"
-             : dir == COVER_OPERATION_CLOSING ? "CLOSE"
-                                              : "STOP");
+             dir == COVER_OPERATION_OPENING   ? LOG_STR_LITERAL("OPEN")
+             : dir == COVER_OPERATION_CLOSING ? LOG_STR_LITERAL("CLOSE")
+                                              : LOG_STR_LITERAL("STOP"));
    trig->trigger();
  }
 }
@@ -547,8 +547,8 @@ void FingerprintGrowComponent::dump_config() {
                "  System Identifier Code: 0x%.4X\n"
                "  Touch Sensing Pin: %s\n"
                "  Sensor Power Pin: %s",
-                this->system_identifier_code_, this->has_sensing_pin_ ? sensing_pin_buf : "None",
-                this->has_power_pin_ ? power_pin_buf : "None");
+                this->system_identifier_code_, this->has_sensing_pin_ ? sensing_pin_buf : LOG_STR_LITERAL("None"),
+                this->has_power_pin_ ? power_pin_buf : LOG_STR_LITERAL("None"));
  if (this->idle_period_to_sleep_ms_ < UINT32_MAX) {
    ESP_LOGCONFIG(TAG, "  Idle Period to Sleep: %" PRIu32 " ms", this->idle_period_to_sleep_ms_);
  } else {
@@ -35,18 +35,20 @@ void GraphicalDisplayMenu::setup() {
 }

 void GraphicalDisplayMenu::dump_config() {
-  ESP_LOGCONFIG(TAG,
-                "Graphical Display Menu\n"
-                "  Has Display: %s\n"
-                "  Popup Mode: %s\n"
-                "  Advanced Drawing Mode: %s\n"
-                "  Has Font: %s\n"
-                "  Mode: %s\n"
-                "  Active: %s\n"
-                "  Menu items:",
-                YESNO(this->display_ != nullptr), YESNO(this->display_ != nullptr), YESNO(this->display_ == nullptr),
-                YESNO(this->font_ != nullptr),
-                this->mode_ == display_menu_base::MENU_MODE_ROTARY ? "Rotary" : "Joystick", YESNO(this->active_));
+  ESP_LOGCONFIG(
+      TAG,
+      "Graphical Display Menu\n"
+      "  Has Display: %s\n"
+      "  Popup Mode: %s\n"
+      "  Advanced Drawing Mode: %s\n"
+      "  Has Font: %s\n"
+      "  Mode: %s\n"
+      "  Active: %s\n"
+      "  Menu items:",
+      YESNO(this->display_ != nullptr), YESNO(this->display_ != nullptr), YESNO(this->display_ == nullptr),
+      YESNO(this->font_ != nullptr),
+      this->mode_ == display_menu_base::MENU_MODE_ROTARY ? LOG_STR_LITERAL("Rotary") : LOG_STR_LITERAL("Joystick"),
+      YESNO(this->active_));
  for (size_t i = 0; i < this->displayed_item_->items_size(); i++) {
    auto *item = this->displayed_item_->get_item(i);
    ESP_LOGCONFIG(TAG, "  %i: %s (Type: %s, Immediate Edit: %s)", i, item->get_text().c_str(),
@@ -69,10 +69,12 @@ void GT911Touchscreen::setup_internal_() {
          // Direct MCU pin: attach a hardware interrupt, no polling needed.
          this->attach_interrupt_(static_cast<InternalGPIOPin *>(this->interrupt_pin_),
                                  active_high ? gpio::INTERRUPT_RISING_EDGE : gpio::INTERRUPT_FALLING_EDGE);
-          ESP_LOGD(TAG, "Interrupt pin: hardware interrupt, active %s", active_high ? "HIGH" : "LOW");
+          ESP_LOGD(TAG, "Interrupt pin: hardware interrupt, active %s",
+                   active_high ? LOG_STR_LITERAL("HIGH") : LOG_STR_LITERAL("LOW"));
        } else {
          // IO expander pin: leave as output for configuration only.
-          ESP_LOGD(TAG, "Interrupt pin: IO expander polling mode, active %s", active_high ? "HIGH" : "LOW");
+          ESP_LOGD(TAG, "Interrupt pin: IO expander polling mode, active %s",
+                   active_high ? LOG_STR_LITERAL("HIGH") : LOG_STR_LITERAL("LOW"));
        }
      }
    }
@@ -248,7 +248,8 @@ void HaierClimateBase::setup() {

 void HaierClimateBase::dump_config() {
  LOG_CLIMATE("", "Haier Climate", this);
-  ESP_LOGCONFIG(TAG, "  Device communication status: %s", this->valid_connection() ? "established" : "none");
+  ESP_LOGCONFIG(TAG, "  Device communication status: %s",
+                this->valid_connection() ? LOG_STR_LITERAL("established") : LOG_STR_LITERAL("none"));
 }

 void HaierClimateBase::loop() {
@@ -343,11 +343,11 @@ void HonClimate::dump_config() {
                  this->hvac_hardware_info_.value().software_version_,
                  this->hvac_hardware_info_.value().hardware_version_, this->hvac_hardware_info_.value().device_name_);
    ESP_LOGCONFIG(TAG, "  Device features:%s%s%s%s%s",
-                  (this->hvac_hardware_info_.value().functions_[0] ? " interactive" : ""),
-                  (this->hvac_hardware_info_.value().functions_[1] ? " controller-device" : ""),
-                  (this->hvac_hardware_info_.value().functions_[2] ? " crc" : ""),
-                  (this->hvac_hardware_info_.value().functions_[3] ? " multinode" : ""),
-                  (this->hvac_hardware_info_.value().functions_[4] ? " role" : ""));
+                  (this->hvac_hardware_info_.value().functions_[0] ? LOG_STR_LITERAL(" interactive") : ""),
+                  (this->hvac_hardware_info_.value().functions_[1] ? LOG_STR_LITERAL(" controller-device") : ""),
+                  (this->hvac_hardware_info_.value().functions_[2] ? LOG_STR_LITERAL(" crc") : ""),
+                  (this->hvac_hardware_info_.value().functions_[3] ? LOG_STR_LITERAL(" multinode") : ""),
+                  (this->hvac_hardware_info_.value().functions_[4] ? LOG_STR_LITERAL(" role") : ""));
    ESP_LOGCONFIG(TAG, "  Active alarms: %s", buf_to_hex(this->active_alarms_, sizeof(this->active_alarms_)).c_str());
  }
 }
@@ -29,8 +29,9 @@ void HBridgeSwitch::dump_config() {
  LOG_PIN("  On Pin: ", this->on_pin_);
  LOG_PIN("  Off Pin: ", this->off_pin_);
  ESP_LOGCONFIG(TAG, "  Pulse length: %" PRId32 " ms", this->pulse_length_);
-  if (this->wait_time_)
+  if (this->wait_time_) {
    ESP_LOGCONFIG(TAG, "  Wait time %" PRId32 " ms", this->wait_time_);
+  }
 }

 void HBridgeSwitch::write_state(bool state) {
@@ -38,7 +38,7 @@ void HDC302XComponent::dump_config() {
  ESP_LOGCONFIG(TAG,
                "HDC302x:\n"
                "  Heater: %s",
-                this->heater_active_ ? "active" : "inactive");
+                this->heater_active_ ? LOG_STR_LITERAL("active") : LOG_STR_LITERAL("inactive"));
  LOG_I2C_DEVICE(this);
  LOG_UPDATE_INTERVAL(this);
  LOG_SENSOR("  ", "Temperature", this->temp_sensor_);
@@ -44,8 +44,9 @@ void HE60rCover::dump_config() {
                "  Close Duration: %.1fs",
                this->open_duration_ / 1e3f, this->close_duration_ / 1e3f);
  auto restore = this->restore_state_();
-  if (restore.has_value())
+  if (restore.has_value()) {
    ESP_LOGCONFIG(TAG, "  Saved position %d%%", (int) (restore->position * 100.f));
+  }
 }

 void HE60rCover::endstop_reached_(CoverOperation operation) {
@@ -59,7 +60,7 @@ void HE60rCover::endstop_reached_(CoverOperation operation) {
    if (this->last_command_ == operation) {
      float dur = (float) (now - this->start_dir_time_) / 1e3f;
      ESP_LOGD(TAG, "'%s' - %s endstop reached. Took %.1fs.", this->name_.c_str(),
-               operation == COVER_OPERATION_OPENING ? "Open" : "Close", dur);
+               operation == COVER_OPERATION_OPENING ? LOG_STR_LITERAL("Open") : LOG_STR_LITERAL("Close"), dur);
    }
    this->publish_state();
  }
@@ -77,8 +78,9 @@ void HE60rCover::process_rx_(uint8_t data) {
  ESP_LOGV(TAG, "Process RX data %X", data);
  if (!this->query_seen_) {
    this->query_seen_ = data == QUERY_BYTE;
-    if (!this->query_seen_)
+    if (!this->query_seen_) {
      ESP_LOGD(TAG, "RX Byte %02X", data);
+    }
    return;
  }
  switch (data) {
@@ -213,9 +215,9 @@ void HE60rCover::start_direction_(CoverOperation dir) {
  if (this->current_operation == dir)
    return;
  ESP_LOGD(TAG, "'%s' - Direction '%s' requested.", this->name_.c_str(),
-           dir == COVER_OPERATION_OPENING   ? "OPEN"
-           : dir == COVER_OPERATION_CLOSING ? "CLOSE"
-                                            : "STOP");
+           dir == COVER_OPERATION_OPENING   ? LOG_STR_LITERAL("OPEN")
+           : dir == COVER_OPERATION_CLOSING ? LOG_STR_LITERAL("CLOSE")
+                                            : LOG_STR_LITERAL("STOP"));

  if (dir == this->next_direction_) {
    // either moving and needs to stop, or stopped and will move correctly on one trigger
@@ -336,7 +336,8 @@ void HlkFm22xComponent::dump_config() {
  }
  if (this->enrolling_binary_sensor_) {
    LOG_BINARY_SENSOR("  ", "Enrolling", this->enrolling_binary_sensor_);
-    ESP_LOGCONFIG(TAG, "    Current Value: %s", this->enrolling_binary_sensor_->state ? "ON" : "OFF");
+    ESP_LOGCONFIG(TAG, "    Current Value: %s",
+                  this->enrolling_binary_sensor_->state ? LOG_STR_LITERAL("ON") : LOG_STR_LITERAL("OFF"));
  }
  if (this->face_count_sensor_) {
    LOG_SENSOR("  ", "Face Count", this->face_count_sensor_);
@@ -97,7 +97,8 @@ void HLW8012Component::update() {

  if (this->change_mode_every_ != 0 && this->change_mode_at_++ == this->change_mode_every_) {
    this->current_mode_ = !this->current_mode_;
-    ESP_LOGV(TAG, "Changing mode to %s mode", this->current_mode_ ? "CURRENT" : "VOLTAGE");
+    ESP_LOGV(TAG, "Changing mode to %s mode",
+             this->current_mode_ ? LOG_STR_LITERAL("CURRENT") : LOG_STR_LITERAL("VOLTAGE"));
    this->change_mode_at_ = 0;
    this->sel_pin_->digital_write(this->current_mode_);
  }
@@ -257,8 +257,9 @@ void HoermannHcp::on_state_reg_(uint16_t value) {
    }
  }
  // The low byte can change on its own, so only report a state we cannot decode once.
-  if (state != (previous >> 8))
+  if (state != (previous >> 8)) {
    ESP_LOGW(TAG, "Unknown door state 0x%02X", state);
+  }
 }

 // Low byte of register 6: bit 0x10 is the lamp, bit 0x04 the relay. The reference implementation records
@@ -116,8 +116,8 @@ void ILI9XXXDisplay::dump_config() {
                "  Mirror_x: %s\n"
                "  Mirror_y: %s\n"
                "  Invert colors: %s",
-                this->color_order_ == display::COLOR_ORDER_BGR ? "BGR" : "RGB", YESNO(this->swap_xy_),
-                YESNO(this->mirror_x_), YESNO(this->mirror_y_), YESNO(this->pre_invertcolors_));
+                this->color_order_ == display::COLOR_ORDER_BGR ? LOG_STR_LITERAL("BGR") : LOG_STR_LITERAL("RGB"),
+                YESNO(this->swap_xy_), YESNO(this->mirror_x_), YESNO(this->mirror_y_), YESNO(this->pre_invertcolors_));

  if (this->is_failed()) {
    ESP_LOGCONFIG(TAG, "  => Failed to init Memory: YES!");
@@ -16,7 +16,7 @@ from esphome.types import ConfigType

 AUTO_LOAD = ["improv_base"]
 CODEOWNERS = ["@esphome/core"]
-DEPENDENCIES = ["logger", "wifi"]
+DEPENDENCIES = ["logger", "network"]

 improv_serial_ns = cg.esphome_ns.namespace("improv_serial")

@@ -1,5 +1,5 @@
 #include "improv_serial_component.h"
-#ifdef USE_WIFI
+#ifdef USE_IMPROV_SERIAL
 #include "esphome/core/application.h"
 #include "esphome/core/defines.h"
 #include "esphome/core/hal.h"
@@ -7,7 +7,10 @@
 #include "esphome/core/version.h"

 #include "esphome/components/logger/logger.h"
+#include "esphome/components/network/util.h"
+#ifdef USE_WIFI
 #include "esphome/components/wifi/scan_list.h"
+#endif

 #include <array>

@@ -26,13 +29,17 @@ void ImprovSerialComponent::setup() {
  this->hw_serial_ = logger::global_logger->get_hw_serial();
 #endif

-  if (wifi::global_wifi_component->has_sta()) {
+  // The Improv state machine tracks Wi-Fi provisioning only. General device
+  // connectivity (e.g. Ethernet) is reported separately via GET_NETWORK_STATE.
+#ifdef USE_WIFI
+  if (wifi::global_wifi_component != nullptr && wifi::global_wifi_component->has_sta()) {
    this->state_ = improv::STATE_PROVISIONED;
-  } else if (!wifi::global_wifi_component->is_disabled()) {
+  } else if (wifi::global_wifi_component != nullptr && !wifi::global_wifi_component->is_disabled()) {
    // Respect Wi-Fi's disabled state; forcing a scan while disabled throws
    // the wifi component into an invalid state from which it cannot recover.
    wifi::global_wifi_component->start_scanning();
  }
+#endif
 }

 void ImprovSerialComponent::loop() {
@@ -55,8 +62,14 @@ void ImprovSerialComponent::loop() {
    }
  }

-  if (this->state_ == improv::STATE_PROVISIONING) {
-    if (wifi::global_wifi_component->is_connected()) {
+#ifdef USE_WIFI
+  if (this->state_ == improv::STATE_PROVISIONING && wifi::global_wifi_component != nullptr &&
+      wifi::global_wifi_component->is_connected()) {
+    // Being connected is not enough: re-provisioning a device that is already online leaves the
+    // prior network up until it drops, so check that the joined network is the requested one
+    // before reporting success. Same test as the wifi.connect action.
+    char ssid_buf[wifi::SSID_BUFFER_SIZE];
+    if (strcmp(wifi::global_wifi_component->wifi_ssid_to(ssid_buf), this->connecting_sta_.get_ssid().c_str()) == 0) {
      wifi::global_wifi_component->save_wifi_sta(this->connecting_sta_.get_ssid(),
                                                 this->connecting_sta_.get_password());
      this->connecting_sta_ = {};
@@ -66,6 +79,7 @@ void ImprovSerialComponent::loop() {
      this->send_settings_response_(improv::WIFI_SETTINGS);
    }
  }
+#endif
 }

 void ImprovSerialComponent::dump_config() { ESP_LOGCONFIG(TAG, "Improv Serial:"); }
@@ -143,15 +157,17 @@ void ImprovSerialComponent::write_data_(const uint8_t *data, const size_t size)
 #endif
 }

-void ImprovSerialComponent::send_settings_response_(improv::Command command) {
-  std::array<uint8_t, improv::RPC_RESPONSE_MAX_SIZE> buf;
-  improv::RpcResponseBuilder builder(buf, command);
-#ifdef USE_IMPROV_SERIAL_NEXT_URL
-  this->add_next_url_(builder, MAX_NEXT_URL_LEN);
-#endif
 #ifdef USE_WEBSERVER
-  for (auto &ip : wifi::global_wifi_component->wifi_sta_ip_addresses()) {
-    if (ip.is_ip4()) {
+void ImprovSerialComponent::add_webserver_urls_(improv::RpcResponseBuilder &builder, [[maybe_unused]] bool wifi_first) {
+  // The webserver listens on every interface, so advertise each one that has a usable IPv4.
+  // network::get_ip_addresses() can't be used here: it returns only the highest-priority
+  // interface's addresses, which are all-unset (0.0.0.0) when e.g. Ethernet has no link while
+  // the device is online via Wi-Fi, and 0.0.0.0 must not become the advertised URL. OpenThread
+  // is omitted: it only ever has IPv6 addresses, which cannot form an IPv4 http:// URL.
+  const auto append_urls = [&builder](const network::IPAddresses &addresses) {
+    for (const auto &ip : addresses) {
+      if (!ip.is_ip4() || !ip.is_set())
+        continue;
      char ip_buf[network::IP_ADDRESS_BUFFER_SIZE];
      ip.str_to(ip_buf);
      // "http://" (7) + IP (40) + ":" (1) + port (5) + null (1) = 54
@@ -162,9 +178,43 @@ void ImprovSerialComponent::send_settings_response_(improv::Command command) {
      if (!builder.add_string(webserver_url, len)) {
        ESP_LOGW(TAG, "Response full; URL dropped");
      }
-      break;
    }
-  }
+  };
+#ifdef USE_WIFI
+  // Clients redirect to the first URL, so the interface the client just configured has to lead:
+  // another interface's address can be on a subnet that client cannot reach.
+  const auto append_wifi_urls = [&append_urls]() {
+    if (wifi::global_wifi_component != nullptr)
+      append_urls(wifi::global_wifi_component->get_ip_addresses());
+  };
+  if (wifi_first)
+    append_wifi_urls();
+#endif
+#ifdef USE_ETHERNET
+  if (ethernet::global_eth_component != nullptr)
+    append_urls(ethernet::global_eth_component->get_ip_addresses());
+#endif
+#ifdef USE_MODEM
+  if (modem::global_modem_component != nullptr)
+    append_urls(modem::global_modem_component->get_ip_addresses());
+#endif
+#ifdef USE_WIFI
+  if (!wifi_first)
+    append_wifi_urls();
+#endif
+}
+#endif  // USE_WEBSERVER
+
+void ImprovSerialComponent::send_settings_response_(improv::Command command) {
+  std::array<uint8_t, improv::RPC_RESPONSE_MAX_SIZE> buf;
+  improv::RpcResponseBuilder builder(buf, command);
+#ifdef USE_IMPROV_SERIAL_NEXT_URL
+  this->add_next_url_(builder, MAX_NEXT_URL_LEN);
+#endif
+#ifdef USE_WEBSERVER
+  // This response only ever answers Wi-Fi provisioning, so lead with the Wi-Fi URL as it did
+  // before other interfaces were reported.
+  this->add_webserver_urls_(builder, /*wifi_first=*/true);
 #endif
  this->send_response_(builder.finish(false));
 }
@@ -231,7 +281,8 @@ bool ImprovSerialComponent::parse_improv_serial_byte_(uint8_t byte) {
 bool ImprovSerialComponent::parse_improv_payload_(improv::ImprovCommand &command) {
  switch (command.command) {
    case improv::WIFI_SETTINGS: {
-      if (wifi::global_wifi_component->is_disabled()) {
+#ifdef USE_WIFI
+      if (wifi::global_wifi_component == nullptr || wifi::global_wifi_component->is_disabled()) {
        // Wi-Fi is disabled, so we can't provision. Respond immediately
        // instead of letting the client wait out its provisioning timeout.
        ESP_LOGW(TAG, "Wi-Fi is disabled; cannot provision");
@@ -243,21 +294,32 @@ bool ImprovSerialComponent::parse_improv_payload_(improv::ImprovCommand &command
      sta.set_password(command.password.c_str());
      this->connecting_sta_ = sta;

+      // Sampled before start_connecting(): the old connection drops asynchronously after it.
+      const bool switching = wifi::global_wifi_component->is_connected();
      wifi::global_wifi_component->set_sta(sta);
      wifi::global_wifi_component->start_connecting(sta);
      this->set_state_(improv::STATE_PROVISIONING);
      ESP_LOGD(TAG, "Received settings: SSID=%s, password=" LOG_SECRET("%s"), command.ssid.c_str(),
               command.password.c_str());

-      this->set_timeout("wifi-connect-timeout", 30000, [this]() { this->on_wifi_connect_timeout_(); });
+      this->set_timeout("wifi-connect-timeout", switching ? WIFI_SWITCH_TIMEOUT_MS : WIFI_CONNECT_TIMEOUT_MS,
+                        [this]() { this->on_wifi_connect_timeout_(); });
+#else
+      // No Wi-Fi support compiled in; there is nothing to provision.
+      ESP_LOGW(TAG, "Wi-Fi not supported; cannot provision");
+      this->set_error_(improv::ERROR_UNABLE_TO_CONNECT);
+#endif
      return true;
    }
-    case improv::GET_CURRENT_STATE:
-      if (wifi::global_wifi_component->is_disabled()) {
-        // Wi-Fi is disabled; report the Improv "stopped" state so a client can tell
-        // the user that provisioning is unavailable. Reported transiently without
-        // disturbing our internal provisioning state machine, so a later `wifi.enable`
-        // still reports the correct state.
+    case improv::GET_CURRENT_STATE: {
+      // This state machine tracks Wi-Fi provisioning only. When Wi-Fi is disabled or not
+      // compiled in, provisioning is unavailable -> report STOPPED so the client doesn't
+      // offer a Wi-Fi form. General connectivity (e.g. Ethernet) is reported separately
+      // via GET_NETWORK_STATE.
+#ifdef USE_WIFI
+      if (wifi::global_wifi_component == nullptr || wifi::global_wifi_component->is_disabled()) {
+        // Reported transiently without disturbing our internal provisioning state machine,
+        // so a later `wifi.enable` still reports the correct state.
        this->send_current_state_(improv::STATE_STOPPED);
        return true;
      }
@@ -265,14 +327,20 @@ bool ImprovSerialComponent::parse_improv_payload_(improv::ImprovCommand &command
      if (this->state_ == improv::STATE_PROVISIONED) {
        this->send_settings_response_(improv::GET_CURRENT_STATE);
      }
+#else
+      this->send_current_state_(improv::STATE_STOPPED);
+#endif
      return true;
+    }
    case improv::GET_DEVICE_INFO: {
      this->send_version_info_();
      return true;
    }
    case improv::GET_WIFI_NETWORKS: {
-      const auto &results = wifi::global_wifi_component->get_scan_result();
+      // Declared out here because the terminating empty response is sent with or without Wi-Fi
      std::array<uint8_t, improv::RPC_RESPONSE_MAX_SIZE> buf;
+#ifdef USE_WIFI
+      const auto &results = wifi::global_wifi_component->get_scan_result();
      for (const auto &scan : results) {
        bool with_auth = false;
        if (!wifi::should_show_scan_entry(results, scan, with_auth))
@@ -289,11 +357,52 @@ bool ImprovSerialComponent::parse_improv_payload_(improv::ImprovCommand &command
        builder.add_string(YESNO(with_auth));
        this->send_response_(builder.finish(false));
      }
+#endif  // USE_WIFI
      // Send empty response to signify the end of the list.
      improv::RpcResponseBuilder builder(buf, improv::GET_WIFI_NETWORKS);
      this->send_response_(builder.finish(false));
      return true;
    }
+    case improv::GET_NETWORK_STATE: {
+      // Reports general device connectivity and which network interfaces are present, decoupled
+      // from the Wi-Fi-only provisioning state machine. data[0] is a decimal flags byte;
+      // when online, the reachable device URL(s) follow.
+      uint8_t flags = 0;
+      if (network::is_connected())
+        flags |= improv::NETWORK_IS_ONLINE;
+#ifdef USE_WIFI
+      flags |= improv::NETWORK_SUPPORTS_WIFI;
+#endif
+#ifdef USE_ETHERNET
+      flags |= improv::NETWORK_SUPPORTS_ETHERNET;
+#endif
+#ifdef USE_OPENTHREAD
+      flags |= improv::NETWORK_SUPPORTS_THREAD;
+#endif
+#ifdef USE_MODEM
+      flags |= improv::NETWORK_SUPPORTS_MODEM;
+#endif
+      std::array<uint8_t, improv::RPC_RESPONSE_MAX_SIZE> buf;
+      improv::RpcResponseBuilder builder(buf, improv::GET_NETWORK_STATE);
+      // Every flag bit fits int8_t's positive range, so int8_to_str renders the byte
+      static_assert(improv::NETWORK_SUPPORTS_MODEM <= 0x7F, "network flags no longer fit int8_to_str");
+      char flags_buf[4];  // uint8_t: max "255" + null
+      char *flags_end = int8_to_str(flags_buf, static_cast<int8_t>(flags));
+      builder.add_string(flags_buf, flags_end - flags_buf);
+#ifdef USE_WEBSERVER
+      // Not tied to one interface, so follow the configured priority the way
+      // network::get_ip_addresses() does: a wifi-first network priority list leads with Wi-Fi.
+      if (flags & improv::NETWORK_IS_ONLINE) {
+#if defined(USE_NETWORK_PRIMARY_INTERFACE_WIFI) && defined(USE_WIFI)
+        this->add_webserver_urls_(builder, /*wifi_first=*/true);
+#else
+        this->add_webserver_urls_(builder, /*wifi_first=*/false);
+#endif
+      }
+#endif
+      this->send_response_(builder.finish(false));
+      return true;
+    }
    default: {
      ESP_LOGW(TAG, "Unknown payload");
      this->set_error_(improv::ERROR_UNKNOWN_RPC);
@@ -331,12 +440,14 @@ void ImprovSerialComponent::send_response_(std::span<const uint8_t> response) {
  this->write_data_(response.data(), response.size());
 }

+#ifdef USE_WIFI
 void ImprovSerialComponent::on_wifi_connect_timeout_() {
  this->set_error_(improv::ERROR_UNABLE_TO_CONNECT);
  this->set_state_(improv::STATE_AUTHORIZED);
  ESP_LOGW(TAG, "Timed out while connecting to Wi-Fi network");
  wifi::global_wifi_component->clear_sta();
 }
+#endif

 ImprovSerialComponent *global_improv_serial_component =  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
    nullptr;                                             // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
@@ -2,15 +2,19 @@

 #include "esphome/components/improv_base/improv_base.h"
 #include "esphome/components/logger/logger.h"
-#include "esphome/components/wifi/wifi_component.h"
+#include "esphome/components/network/util.h"
 #include "esphome/core/component.h"
 #include "esphome/core/defines.h"
 #include "esphome/core/helpers.h"
-#ifdef USE_WIFI
+#ifdef USE_IMPROV_SERIAL
 #include <improv.h>
 #include <span>
 #include <vector>

+#ifdef USE_WIFI
+#include "esphome/components/wifi/wifi_component.h"
+#endif
+
 #ifdef USE_IMPROV_SERIAL_UART
 #include "esphome/components/uart/uart_component.h"
 #elif defined(USE_ESP32)
@@ -48,13 +52,22 @@ enum ImprovSerialType : uint8_t {
 static const uint16_t IMPROV_SERIAL_TIMEOUT = 100;
 static const uint8_t IMPROV_SERIAL_VERSION = 1;

+#ifdef USE_WIFI
+// Wi-Fi connect failure timers: a fresh provision reports at 30 s (stock behavior), while
+// switching networks on an already-connected device (disconnect + reconnect) can legitimately
+// take longer; 90 s matches esp32_improv's default wifi_timeout.
+static const uint32_t WIFI_CONNECT_TIMEOUT_MS = 30000;
+static const uint32_t WIFI_SWITCH_TIMEOUT_MS = 90000;
+#endif
+
 // The serial frame length field is one byte
 static constexpr size_t MAX_SERIAL_RESPONSE = 255;
 // command + data length + trailing byte
 static constexpr size_t RPC_RESPONSE_OVERHEAD = 3;
 static constexpr size_t MAX_SERIAL_PAYLOAD = MAX_SERIAL_RESPONSE - RPC_RESPONSE_OVERHEAD;
 #ifdef USE_WEBSERVER
-// length byte + "http://" + IPv4 + ":" + port
+// length byte + "http://" + IPv4 + ":" + port. Reserves the first URL only; a device with
+// several interfaces online adds the rest best-effort and warns if one no longer fits.
 static constexpr size_t WEBSERVER_URL_RESERVE = 1 + 7 + 15 + 1 + 5;
 #else
 static constexpr size_t WEBSERVER_URL_RESERVE = 0;
@@ -84,8 +97,15 @@ class ImprovSerialComponent final : public Component, public improv_base::Improv
  void send_current_state_(improv::State state);
  void set_error_(improv::Error error);
  void send_response_(std::span<const uint8_t> response);
+#ifdef USE_WIFI
  void on_wifi_connect_timeout_();
+#endif

+#ifdef USE_WEBSERVER
+  /// Append one web server URL per interface that has a usable IPv4. With wifi_first the Wi-Fi
+  /// URL leads, for responses to Wi-Fi provisioning; otherwise interfaces go in priority order.
+  void add_webserver_urls_(improv::RpcResponseBuilder &builder, [[maybe_unused]] bool wifi_first);
+#endif
  void send_settings_response_(improv::Command command);
  void send_version_info_();

@@ -167,7 +187,9 @@ class ImprovSerialComponent final : public Component, public improv_base::Improv

  std::vector<uint8_t> rx_buffer_;
  uint32_t last_read_byte_{0};
+#ifdef USE_WIFI
  wifi::WiFiAP connecting_sta_;
+#endif
  improv::State state_{improv::STATE_AUTHORIZED};
 };

@@ -209,7 +209,8 @@ void INA2XX::dump_config() {
                "  CURRENT_LSB = %f\n"
                "  SHUNT_CAL = %d",
                this->shunt_resistance_ohm_, this->max_current_a_, this->shunt_tempco_ppm_c_,
-                (uint8_t) this->adc_range_, this->adc_range_ ? "±40.96 mV" : "±163.84 mV", this->current_lsb_,
+                (uint8_t) this->adc_range_,
+                this->adc_range_ ? LOG_STR_LITERAL("±40.96 mV") : LOG_STR_LITERAL("±163.84 mV"), this->current_lsb_,
                this->shunt_cal_);

  ESP_LOGCONFIG(TAG, "  ADC Samples = %d; ADC times: Bus = %d μs, Shunt = %d μs, Temp = %d μs",
@@ -740,7 +740,7 @@ bool IT8951Display::prepare_update_region_(UpdateMode &mode) {
  this->reset_dirty_region_();

  ESP_LOGV(TAG, "Update: %ux%u@%u,%u mode=%u (%s)", width, height, x, y, static_cast<unsigned>(mode),
-           this->grayscale_ ? "grayscale" : "mono");
+           this->grayscale_ ? LOG_STR_LITERAL("grayscale") : LOG_STR_LITERAL("mono"));
  return true;
 }

@@ -1063,25 +1063,27 @@ void IT8951Display::dump_config() {
    strncpy(force_temperature, "(controller default)", sizeof(force_temperature));
    force_temperature[sizeof(force_temperature) - 1] = '\0';
  }
-  ESP_LOGCONFIG(TAG,
-                "  Model preset: %s"
-                "\n  Dimensions: %dx%d"
-                "\n  Buffer: %u bytes"
-                "\n  Image buffer addr: 0x%04X%04X"
-                "\n  VCOM: %.02fV (set selector 0x%04X)"
-                "\n  Force temperature: %s"
-                "\n  Display command: %s"
-                "\n  Sleep when done: %s"
-                "\n  Full update every: %u"
-                "\n  Inverted colors: %s"
-                "\n  Pixel format: %s"
-                "\n  Reset duration: %" PRIu32 "ms",
-                this->name_ != nullptr ? this->name_ : "(unknown)", this->get_width_internal(),
-                this->get_height_internal(), static_cast<unsigned>(this->buffer_length_), this->img_buf_addr_h_,
-                this->img_buf_addr_l_, static_cast<float>(this->vcom_) / 1000.0f, this->vcom_register_,
-                force_temperature, this->use_legacy_dpy_area_ ? "DPY_AREA (0x0034, legacy)" : "DPY_BUF_AREA (0x0037)",
-                YESNO(this->sleep_when_done_), this->full_update_every_, YESNO(this->invert_colors_),
-                this->grayscale_ ? "4bpp grayscale" : "1bpp monochrome", this->reset_duration_);
+  ESP_LOGCONFIG(
+      TAG,
+      "  Model preset: %s"
+      "\n  Dimensions: %dx%d"
+      "\n  Buffer: %u bytes"
+      "\n  Image buffer addr: 0x%04X%04X"
+      "\n  VCOM: %.02fV (set selector 0x%04X)"
+      "\n  Force temperature: %s"
+      "\n  Display command: %s"
+      "\n  Sleep when done: %s"
+      "\n  Full update every: %u"
+      "\n  Inverted colors: %s"
+      "\n  Pixel format: %s"
+      "\n  Reset duration: %" PRIu32 "ms",
+      this->name_ != nullptr ? this->name_ : LOG_STR_LITERAL("(unknown)"), this->get_width_internal(),
+      this->get_height_internal(), static_cast<unsigned>(this->buffer_length_), this->img_buf_addr_h_,
+      this->img_buf_addr_l_, static_cast<float>(this->vcom_) / 1000.0f, this->vcom_register_, force_temperature,
+      this->use_legacy_dpy_area_ ? LOG_STR_LITERAL("DPY_AREA (0x0034, legacy)")
+                                 : LOG_STR_LITERAL("DPY_BUF_AREA (0x0037)"),
+      YESNO(this->sleep_when_done_), this->full_update_every_, YESNO(this->invert_colors_),
+      this->grayscale_ ? LOG_STR_LITERAL("4bpp grayscale") : LOG_STR_LITERAL("1bpp monochrome"), this->reset_duration_);
  LOG_PIN("  Reset Pin: ", this->reset_pin_);
  LOG_PIN("  Busy Pin: ", this->busy_pin_);
  LOG_PIN("  CS Pin: ", this->cs_);
@@ -16,26 +16,33 @@ void KeyCollector::loop() {
 void KeyCollector::dump_config() {
 #if ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_CONFIG
  ESP_LOGCONFIG(TAG, "Key Collector:");
-  if (this->min_length_ > 0)
+  if (this->min_length_ > 0) {
    ESP_LOGCONFIG(TAG, "  min length: %d", this->min_length_);
-  if (this->max_length_ > 0)
+  }
+  if (this->max_length_ > 0) {
    ESP_LOGCONFIG(TAG, "  max length: %d", this->max_length_);
-  if (!this->back_keys_.empty())
+  }
+  if (!this->back_keys_.empty()) {
    ESP_LOGCONFIG(TAG, "  erase keys '%s'", this->back_keys_.c_str());
-  if (!this->clear_keys_.empty())
+  }
+  if (!this->clear_keys_.empty()) {
    ESP_LOGCONFIG(TAG, "  clear keys '%s'", this->clear_keys_.c_str());
-  if (!this->start_keys_.empty())
+  }
+  if (!this->start_keys_.empty()) {
    ESP_LOGCONFIG(TAG, "  start keys '%s'", this->start_keys_.c_str());
+  }
  if (!this->end_keys_.empty()) {
    ESP_LOGCONFIG(TAG,
                  "  end keys '%s'\n"
                  "  end key is required: %s",
                  this->end_keys_.c_str(), ONOFF(this->end_key_required_));
  }
-  if (!this->allowed_keys_.empty())
+  if (!this->allowed_keys_.empty()) {
    ESP_LOGCONFIG(TAG, "  allowed keys '%s'", this->allowed_keys_.c_str());
-  if (this->timeout_ > 0)
+  }
+  if (this->timeout_ > 0) {
    ESP_LOGCONFIG(TAG, "  entry timeout: %0.1f", this->timeout_ / 1000.0);
+  }
 #endif
 }

@@ -150,7 +150,8 @@ void Lc709203f::dump_config() {
                "  Pack Size: %d mAH\n"
                "  Pack APA: 0x%02X\n"
                "  Pack Rated Voltage: 3.%sV",
-                this->pack_size_, this->apa_, this->pack_voltage_ == 0x0000 ? "8" : "7");
+                this->pack_size_, this->apa_,
+                this->pack_voltage_ == 0x0000 ? LOG_STR_LITERAL("8") : LOG_STR_LITERAL("7"));
  LOG_I2C_DEVICE(this);
  LOG_UPDATE_INTERVAL(this);
  LOG_SENSOR("  ", "Voltage", this->voltage_sensor_);
@@ -701,7 +701,8 @@ uint8_t LD2420Component::set_config_mode(bool enable) {
    cmd_frame.data_length += sizeof(CMD_PROTOCOL_VER);
  }
  cmd_frame.footer = CMD_FRAME_FOOTER;
-  ESP_LOGV(TAG, "Sending set config %s command: %2X", enable ? "enable" : "disable", cmd_frame.command);
+  ESP_LOGV(TAG, "Sending set config %s command: %2X", enable ? LOG_STR_LITERAL("enable") : LOG_STR_LITERAL("disable"),
+           cmd_frame.command);
  return this->send_cmd_from_array(cmd_frame);
 }

@@ -437,7 +437,8 @@ void LD6002BComponent::dump_config() {
                "HLK-LD6002B:\n"
                "  Auto wake: %s\n"
                "  Max data length: %u",
-                this->auto_wake_ ? "true" : "false", static_cast<unsigned>(this->max_data_len_));
+                this->auto_wake_ ? LOG_STR_LITERAL("true") : LOG_STR_LITERAL("false"),
+                static_cast<unsigned>(this->max_data_len_));
  if (this->wakeup_pin_ != nullptr) {
    LOG_PIN("  Wake-up Pin: ", this->wakeup_pin_);
    ESP_LOGCONFIG(TAG, "  Wake Pulse: %" PRIu32 "ms", this->wakeup_pulse_ms_);
@@ -333,8 +333,9 @@ void LN882HBLE::loop() {
  // the queue empty — from the very first report on. Checking here keeps that
  // failure visible instead of producing a scanner that is silently dead.
  uint16_t dropped = this->report_queue_.get_and_reset_dropped_count();
-  if (dropped > 0)
+  if (dropped > 0) {
    ESP_LOGW(TAG, "Dropped %u scan reports (queue full or out of memory for a report slot)", dropped);
+  }
  // Drain the lock-free ring filled by the rw task; all per-report work runs
  // here on the main task, then the report returns to the pool.
  BLEScanReport *report = this->report_queue_.pop();
@@ -628,10 +628,6 @@ OBJ_FLAGS = (
    "send_draw_task_events",
    "widget_1",
    "widget_2",
-    "user_1",
-    "user_2",
-    "user_3",
-    "user_4",
 )
 LV_OBJ_FLAG = LvConstant("LV_OBJ_FLAG_", *OBJ_FLAGS)

@@ -1059,8 +1059,9 @@ static void *lv_alloc_draw_buf(size_t size, bool internal) {
  void *buffer;
  size = LV_ROUND_UP(size, LV_DRAW_BUF_ALIGN);
  buffer = heap_caps_aligned_alloc(LV_DRAW_BUF_ALIGN, size, internal ? MALLOC_CAP_8BIT : cap_bits);  // NOLINT
-  if (buffer == nullptr)
+  if (buffer == nullptr) {
    ESP_LOGW(esphome::lvgl::TAG, "Failed to allocate %zu bytes for %sdraw buffer", size, internal ? "internal " : "");
+  }
  return buffer;
 }

@@ -2,7 +2,7 @@ from contextlib import ExitStack

 from esphome import automation
 import esphome.codegen as cg
-from esphome.components.const import CONF_ROWS
+from esphome.components.const import CONF_COLUMNS, CONF_ROWS
 import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_ITEMS, CONF_ROW, CONF_TEXT, CONF_WIDTH
 from esphome.core import ID
@@ -20,7 +20,6 @@ from .label import CONF_LABEL

 CONF_TABLE = "table"
 CONF_CELLS = "cells"
-CONF_COLUMNS = "columns"
 CONF_ROW_COUNT = "row_count"
 CONF_COLUMN_COUNT = "column_count"
 CONF_MERGE_RIGHT = "merge_right"
@@ -1,7 +1,7 @@
 from esphome import automation, pins
 import esphome.codegen as cg
 from esphome.components import key_provider
-from esphome.components.const import CONF_ROWS
+from esphome.components.const import CONF_COLUMNS, CONF_KEYS, CONF_ROWS
 import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_ON_KEY, CONF_PIN, CONF_TRIGGER_ID
 from esphome.types import ConfigType
@@ -21,8 +21,6 @@ MatrixKeyTrigger = matrix_keypad_ns.class_(
 )

 CONF_KEYPAD_ID = "keypad_id"
-CONF_COLUMNS = "columns"
-CONF_KEYS = "keys"
 CONF_DEBOUNCE_TIME = "debounce_time"
 CONF_HAS_DIODES = "has_diodes"
 CONF_HAS_PULLDOWNS = "has_pulldowns"
@@ -23,8 +23,10 @@ void MAX31856Sensor::setup() {
 void MAX31856Sensor::dump_config() {
  LOG_SENSOR("", "MAX31856", this);
  LOG_PIN("  CS Pin: ", this->cs_);
-  ESP_LOGCONFIG(TAG, "  Mains Filter: %s",
-                (filter_ == FILTER_60HZ ? "60 Hz" : (filter_ == FILTER_50HZ ? "50 Hz" : "Unknown!")));
+  ESP_LOGCONFIG(
+      TAG, "  Mains Filter: %s",
+      (filter_ == FILTER_60HZ ? LOG_STR_LITERAL("60 Hz")
+                              : (filter_ == FILTER_50HZ ? LOG_STR_LITERAL("50 Hz") : LOG_STR_LITERAL("Unknown!"))));
  if (this->thermocouple_type_ < 0 || this->thermocouple_type_ > 7) {
    ESP_LOGCONFIG(TAG, "  Thermocouple Type: Unknown");
  } else {
@@ -80,12 +80,14 @@ void MAX31865Sensor::dump_config() {
  LOG_SENSOR("", "MAX31865", this);
  LOG_PIN("  CS Pin: ", this->cs_);
  LOG_UPDATE_INTERVAL(this);
-  ESP_LOGCONFIG(TAG,
-                "  Reference Resistance: %.2fΩ\n"
-                "  RTD: %u-wire %.2fΩ\n"
-                "  Mains Filter: %s",
-                reference_resistance_, rtd_wires_, rtd_nominal_resistance_,
-                (filter_ == FILTER_60HZ ? "60 Hz" : (filter_ == FILTER_50HZ ? "50 Hz" : "Unknown!")));
+  ESP_LOGCONFIG(
+      TAG,
+      "  Reference Resistance: %.2fΩ\n"
+      "  RTD: %u-wire %.2fΩ\n"
+      "  Mains Filter: %s",
+      reference_resistance_, rtd_wires_, rtd_nominal_resistance_,
+      (filter_ == FILTER_60HZ ? LOG_STR_LITERAL("60 Hz")
+                              : (filter_ == FILTER_50HZ ? LOG_STR_LITERAL("50 Hz") : LOG_STR_LITERAL("Unknown!"))));
 }

 void MAX31865Sensor::read_data_() {
@@ -319,7 +319,7 @@ uint16_t Mcp4461Component::read_wiper_level_(uint8_t wiper_idx, bool *ok) {
  if (!(this->read_16_(reg, &buf))) {
    this->error_code_ = MCP4461_STATUS_I2C_ERROR;
    this->status_set_warning();
-    ESP_LOGW(TAG, "Error fetching %swiper %u value", (wiper_idx > 3) ? "nonvolatile " : "", wiper_idx);
+    ESP_LOGW(TAG, "Error fetching %swiper %u value", (wiper_idx > 3) ? LOG_STR_LITERAL("nonvolatile ") : "", wiper_idx);
    return 0;
  }
  if (ok != nullptr) {
@@ -377,7 +377,8 @@ void Mcp4461Component::write_wiper_level_(uint8_t wiper, uint16_t value) {
  if (!(this->mcp4461_write_(this->get_wiper_address_(wiper), value, nonvolatile))) {
    this->error_code_ = MCP4461_STATUS_I2C_ERROR;
    this->status_set_warning();
-    ESP_LOGW(TAG, "Error writing %swiper %u level %u", (wiper > 3) ? "nonvolatile " : "", wiper, value);
+    ESP_LOGW(TAG, "Error writing %swiper %u level %u", (wiper > 3) ? LOG_STR_LITERAL("nonvolatile ") : "", wiper,
+             value);
  }
 }

@@ -122,7 +122,7 @@ void MediaPlayerCall::perform() {
    ESP_LOGV(TAG, "  Volume: %.2f", this->volume_.value());
  }
  if (this->announcement_.has_value()) {
-    ESP_LOGV(TAG, " Announcement: %s", this->announcement_.value() ? "yes" : "no");
+    ESP_LOGV(TAG, " Announcement: %s", this->announcement_.value() ? LOG_STR_LITERAL("yes") : LOG_STR_LITERAL("no"));
  }
  this->parent_->control(*this);
 }
@@ -237,8 +237,9 @@ void MipiDsi::write_to_display_(int x_start, int y_start, int w, int h, const ui
      xSemaphoreTake(this->io_lock_, portMAX_DELAY);
    }
  }
-  if (err != ESP_OK)
+  if (err != ESP_OK) {
    ESP_LOGE(TAG, "lcd_lcd_panel_draw_bitmap failed: %s", esp_err_to_name(err));
+  }
 }

 bool MipiDsi::check_buffer_() {
@@ -12,7 +12,12 @@ from esphome.components.const import (
    CONF_DRAW_ROUNDING,
 )
 from esphome.components.display import CONF_SHOW_TEST_CARD
-from esphome.components.esp32 import VARIANT_ESP32P4, VARIANT_ESP32S3, only_on_variant
+from esphome.components.esp32 import (
+    VARIANT_ESP32P4,
+    VARIANT_ESP32S3,
+    VARIANT_ESP32S31,
+    only_on_variant,
+)
 from esphome.components.mipi import (
    COLOR_ORDERS,
    CONF_DE_PIN,
@@ -226,7 +231,7 @@ def _config_schema(config: ConfigType) -> ConfigType:
    config = cv.All(
        schema,
        cv.only_on_esp32,
-        only_on_variant(supported=[VARIANT_ESP32S3, VARIANT_ESP32P4]),
+        only_on_variant(supported=[VARIANT_ESP32S3, VARIANT_ESP32P4, VARIANT_ESP32S31]),
    )(config)
    model = MODELS[config[CONF_MODEL].upper()]
    model.check_requirements()
@@ -1,11 +1,11 @@
-#if defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32P4)
+#if defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32P4) || defined(USE_ESP32_VARIANT_ESP32S31)
 #include "mipi_rgb.h"
 #include "esphome/core/gpio.h"
 #include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 #include <driver/gpio.h>
-#include <esp_lcd_panel_rgb.h>
+#include <esp_lcd_panel_ops.h>
 #include <span>

 namespace esphome::mipi_rgb {
@@ -177,11 +177,6 @@ void MipiRgb::common_setup_() {
  ESP_LOGCONFIG(TAG, "MipiRgb setup complete");
 }

-void MipiRgb::loop() {
-  if (this->handle_ != nullptr)
-    esp_lcd_rgb_panel_restart(this->handle_);
-}
-
 void MipiRgb::update() {
  if (this->is_failed())
    return;
@@ -243,8 +238,9 @@ void MipiRgb::write_to_display_(int x_start, int y_start, int w, int h, const ui
      ptr += stride;  // next line
    }
  }
-  if (err != ESP_OK)
+  if (err != ESP_OK) {
    ESP_LOGE(TAG, "lcd_lcd_panel_draw_bitmap failed: %s", esp_err_to_name(err));
+  }
 }

 bool MipiRgb::check_buffer_() {
@@ -400,4 +396,5 @@ void MipiRgb::dump_config() {
 }

 }  // namespace esphome::mipi_rgb
-#endif  // defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32P4)
+#endif  // defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32P4) ||
+        // defined(USE_ESP32_VARIANT_ESP32S31)
@@ -1,9 +1,9 @@
 #pragma once

-#if defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32P4)
+#if defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32P4) || defined(USE_ESP32_VARIANT_ESP32S31)
 #include "esphome/core/gpio.h"
 #include "esphome/components/display/display.h"
-#include "esp_lcd_panel_ops.h"
+#include <esp_lcd_panel_rgb.h>
 #ifdef USE_SPI
 #include "esphome/components/spi/spi.h"
 #endif
@@ -25,7 +25,12 @@ class MipiRgb : public display::Display {
 public:
  MipiRgb(int width, int height) : width_(width), height_(height) {}
  void setup() override;
-  void loop() override;
+#ifdef USE_ESP32_VARIANT_ESP32S3
+  void loop() override {
+    if (this->handle_ != nullptr)
+      esp_lcd_rgb_panel_restart(this->handle_);
+  }
+#endif
  void update() override;
  void fill(Color color) override;
  void draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, display::ColorOrder order,
@@ -25,17 +25,21 @@ void internal_dump_config(const char *model, int width, int height, int offset_w
                "  SPI Bus width: %d",
                model, width, height, YESNO(madctl & MADCTL_MV), YESNO(madctl & (MADCTL_MX | MADCTL_XFLIP)),
                YESNO(madctl & (MADCTL_MY | MADCTL_YFLIP)), YESNO(has_hardware_rotation), YESNO(invert_colors),
-                (madctl & MADCTL_BGR) ? "BGR" : "RGB", display_bits, is_big_endian ? "Big" : "Little", spi_mode,
+                (madctl & MADCTL_BGR) ? LOG_STR_LITERAL("BGR") : LOG_STR_LITERAL("RGB"), display_bits,
+                is_big_endian ? LOG_STR_LITERAL("Big") : LOG_STR_LITERAL("Little"), spi_mode,
                static_cast<unsigned>(data_rate / 1000000), bus_width);
  LOG_PIN("  CS Pin: ", cs);
  LOG_PIN("  Reset Pin: ", reset);
  LOG_PIN("  DC Pin: ", dc);
-  if (offset_width != 0)
+  if (offset_width != 0) {
    ESP_LOGCONFIG(TAG, "  Offset width: %d", offset_width);
-  if (offset_height != 0)
+  }
+  if (offset_height != 0) {
    ESP_LOGCONFIG(TAG, "  Offset height: %d", offset_height);
-  if (brightness.has_value())
+  }
+  if (brightness.has_value()) {
    ESP_LOGCONFIG(TAG, "  Brightness: %u", brightness.value());
+  }
 }

 }  // namespace esphome::mipi_spi
@@ -1199,15 +1199,17 @@ void ModbusServerHub::send_raw_(const uint8_t *payload, uint16_t len) {
    this->set_timeout("deferred_send", (this->tx_delay_remaining() + US_PER_MS - 1) / US_PER_MS, [this]() {
      ModbusFrame frame(this->deferred_payload_[0], this->deferred_payload_.data() + 1,
                        this->deferred_payload_len_ - 1);
-      if (!this->send_frame_(frame))
+      if (!this->send_frame_(frame)) {
        ESP_LOGE(TAG, "Deferred server reply dropped: transmission still blocked");
+      }
    });
    return;
  }

  ModbusFrame frame(payload[0], payload + 1, len - 1);
-  if (!this->send_frame_(frame))
+  if (!this->send_frame_(frame)) {
    ESP_LOGE(TAG, "Server reply dropped: a frame arrived during the send delay");
+  }
 }

 void Modbus::clear_rx_buffer_(const LogString *reason, bool warn, size_t bytes_to_clear) {
@@ -269,7 +269,8 @@ void ModbusServer::dump_config() {
                "    Enabled: %s\n"
                "    Register Last Address: 0x%02X\n"
                "    Register Value: %" PRIu16,
-                this->address_, this->server_courtesy_response_.enabled ? "true" : "false",
+                this->address_,
+                this->server_courtesy_response_.enabled ? LOG_STR_LITERAL("true") : LOG_STR_LITERAL("false"),
                this->server_courtesy_response_.register_last_address, this->server_courtesy_response_.register_value);

 #if ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_VERBOSE
@@ -280,8 +281,9 @@ void ModbusServer::dump_config() {
  }
  ESP_LOGCONFIG(TAG, "server bits");
  for (auto &b : this->server_bits_) {
-    ESP_LOGCONFIG(TAG, "  Address=0x%04X readable=%s writable=%s", b->address, b->read_lambda ? "true" : "false",
-                  b->write_lambda ? "true" : "false");
+    ESP_LOGCONFIG(TAG, "  Address=0x%04X readable=%s writable=%s", b->address,
+                  b->read_lambda ? LOG_STR_LITERAL("true") : LOG_STR_LITERAL("false"),
+                  b->write_lambda ? LOG_STR_LITERAL("true") : LOG_STR_LITERAL("false"));
  }
 #endif
 }
@@ -39,10 +39,12 @@ inline char *append_char(char *p, char c) {
 // Function implementation of LOG_MQTT_COMPONENT macro to reduce code size
 void log_mqtt_component(const char *tag, MQTTComponent *obj, bool state_topic, bool command_topic) {
  char buf[MQTT_DEFAULT_TOPIC_MAX_LEN];
-  if (state_topic)
+  if (state_topic) {
    ESP_LOGCONFIG(tag, "  State Topic: '%s'", obj->get_state_topic_to_(buf).c_str());
-  if (command_topic)
+  }
+  if (command_topic) {
    ESP_LOGCONFIG(tag, "  Command Topic: '%s'", obj->get_command_topic_to_(buf).c_str());
+  }
 }

 void MQTTComponent::set_qos(uint8_t qos) { this->qos_ = qos; }
@@ -595,7 +595,8 @@ void Nextion::process_nextion_commands_() {
        uint8_t page_id = to_process[0];
        uint8_t component_id = to_process[1];
        uint8_t touch_event = to_process[2];  // 0 -> release, 1 -> press
-        ESP_LOGV(TAG, "Touch %s: page %u comp %u", touch_event ? "PRESS" : "RELEASE", page_id, component_id);
+        ESP_LOGV(TAG, "Touch %s: page %u comp %u", touch_event ? LOG_STR_LITERAL("PRESS") : LOG_STR_LITERAL("RELEASE"),
+                 page_id, component_id);
        for (auto *touch : this->touch_) {
          touch->process_touch(page_id, component_id, touch_event != 0);
        }
@@ -628,7 +629,7 @@ void Nextion::process_nextion_commands_() {
        const uint16_t x = (uint16_t(to_process[0]) << 8) | to_process[1];
        const uint16_t y = (uint16_t(to_process[2]) << 8) | to_process[3];
        const uint8_t touch_event = to_process[4];  // 0 -> release, 1 -> press
-        ESP_LOGV(TAG, "Touch %s at %u,%u", touch_event ? "PRESS" : "RELEASE", x, y);
+        ESP_LOGV(TAG, "Touch %s at %u,%u", touch_event ? LOG_STR_LITERAL("PRESS") : LOG_STR_LITERAL("RELEASE"), x, y);
        break;
      }

@@ -45,6 +45,15 @@ def decode_encryption_key(value: str) -> bytes:
    return decoded


+def is_reserved_key(value: str) -> bool:
+    """Whether the key is the reserved all-zeros provisioning sentinel.
+
+    The device treats it as no key configured, so consumers that require a
+    real key must reject it.
+    """
+    return not any(decode_encryption_key(value))
+
+
 ENCRYPTION_SCHEMA = cv.Schema(
    {
        cv.Optional(CONF_KEY): cv.sensitive(validate_encryption_key),
@@ -18,8 +18,9 @@ const std::vector<uint64_t> &OneWireBus::get_devices() { return this->devices_;

 bool OneWireBus::reset_() {
  int res = this->reset_int();
-  if (res == -1)
+  if (res == -1) {
    ESP_LOGE(TAG, "1-wire bus is held low");
+  }
  return res == 1;
 }

@@ -49,6 +49,7 @@ enum OTAResponseTypes {
  OTA_RESPONSE_ERROR_BOOTLOADER_VERIFY = 0x91,
  OTA_RESPONSE_ERROR_BOOTLOADER_UPDATE = 0x92,
  OTA_RESPONSE_ERROR_VERSION_DOWNGRADE = 0x93,
+  OTA_RESPONSE_ERROR_ENCRYPTION_REQUIRED = 0x94,
  OTA_RESPONSE_ERROR_UNKNOWN = 0xFF,
 };

@@ -551,12 +551,14 @@ void PacketTransport::dump_config() {
                "  Ping-pong: %s",
                this->platform_name_, YESNO(this->is_encrypted_()), YESNO(this->ping_pong_enable_));
 #ifdef USE_SENSOR
-  for (const auto &sensor : this->sensors_)
+  for (const auto &sensor : this->sensors_) {
    ESP_LOGCONFIG(TAG, "  Sensor: %s", sensor.id);
+  }
 #endif
 #ifdef USE_BINARY_SENSOR
-  for (const auto &sensor : this->binary_sensors_)
+  for (const auto &sensor : this->binary_sensors_) {
    ESP_LOGCONFIG(TAG, "  Binary Sensor: %s", sensor.id);
+  }
 #endif
  for (const auto &host : this->providers_) {
    ESP_LOGCONFIG(TAG, "  Remote host: %s", host.first.c_str());
@@ -564,15 +566,17 @@ void PacketTransport::dump_config() {
 #ifdef USE_SENSOR
    auto rs = this->remote_sensors_.find(host.first.c_str());
    if (rs != this->remote_sensors_.end()) {
-      for (const auto &key : rs->second | std::views::keys)
+      for (const auto &key : rs->second | std::views::keys) {
        ESP_LOGCONFIG(TAG, "    Sensor: %s", key.c_str());
+      }
    }
 #endif
 #ifdef USE_BINARY_SENSOR
    auto rbs = this->remote_binary_sensors_.find(host.first.c_str());
    if (rbs != this->remote_binary_sensors_.end()) {
-      for (const auto &key : rbs->second | std::views::keys)
+      for (const auto &key : rbs->second | std::views::keys) {
        ESP_LOGCONFIG(TAG, "    Binary Sensor: %s", key.c_str());
+      }
    }
 #endif
  }
@@ -119,7 +119,8 @@ void PCM5122::dump_config() {
                "  Channel mix: %s\n"
                "  Volume range: %.1f dB to %.1f dB\n"
                "  Muted: %s",
-                this->bits_per_sample_, this->analog_gain_ == PCM5122_ANALOG_GAIN_0DB ? "0 dB" : "-6 dB",
+                this->bits_per_sample_,
+                this->analog_gain_ == PCM5122_ANALOG_GAIN_0DB ? LOG_STR_LITERAL("0 dB") : LOG_STR_LITERAL("-6 dB"),
                channel_mix_str, this->volume_min_db_, this->volume_max_db_, YESNO(this->is_muted_));
  LOG_PIN("  Enable Pin: ", this->enable_pin_);
 }
@@ -243,8 +243,8 @@ uint8_t PN7150::reset_core_(const bool reset_config, const bool power) {
  }

  ESP_LOGD(TAG, "Configuration %s, NCI version: %s",
-           rx.get_message()[nfc::NCI_PKT_PAYLOAD_OFFSET + 2] ? "reset" : "retained",
-           rx.get_message()[nfc::NCI_PKT_PAYLOAD_OFFSET + 1] == 0x20 ? "2.0" : "1.0");
+           rx.get_message()[nfc::NCI_PKT_PAYLOAD_OFFSET + 2] ? LOG_STR_LITERAL("reset") : LOG_STR_LITERAL("retained"),
+           rx.get_message()[nfc::NCI_PKT_PAYLOAD_OFFSET + 1] == 0x20 ? LOG_STR_LITERAL("2.0") : LOG_STR_LITERAL("1.0"));

  return nfc::STATUS_OK;
 }
@@ -265,8 +265,8 @@ uint8_t PN7160::reset_core_(const bool reset_config, const bool power) {
  }

  ESP_LOGD(TAG, "Configuration %s, NCI version: %s, Manufacturer ID: 0x%02X",
-           rx.get_message()[4] ? "reset" : "retained", rx.get_message()[5] == 0x20 ? "2.0" : "1.0",
-           rx.get_message()[6]);
+           rx.get_message()[4] ? LOG_STR_LITERAL("reset") : LOG_STR_LITERAL("retained"),
+           rx.get_message()[5] == 0x20 ? LOG_STR_LITERAL("2.0") : LOG_STR_LITERAL("1.0"), rx.get_message()[6]);
  rx.get_message().erase(rx.get_message().begin(), rx.get_message().begin() + 8);
  char mfr_buf[nfc::FORMAT_BYTES_BUFFER_SIZE];
  ESP_LOGD(TAG, "Manufacturer info: %s", nfc::format_bytes_to(mfr_buf, rx.get_message()));
@@ -137,7 +137,8 @@ void PylontechComponent::process_line_(std::string &buffer) {
    } else if (strcmp(token_buf, "Power") == 0) {
      // header line i.e. "Power Volt   Curr" and so on
      this->has_tlow_id_ = buffer.find("Tlow.Id") != std::string::npos;
-      ESP_LOGD(TAG, "header line %s Tlow.Id: %s", this->has_tlow_id_ ? "with" : "without",
+      ESP_LOGD(TAG, "header line %s Tlow.Id: %s",
+               this->has_tlow_id_ ? LOG_STR_LITERAL("with") : LOG_STR_LITERAL("without"),
               buffer.substr(0, buffer.size() - 2).c_str());
      return;
    } else {
@@ -124,8 +124,9 @@ void QwiicPIRComponent::dump_config() {

 void QwiicPIRComponent::clear_events_() {
  // Clear event status register
-  if (!this->write_byte(QWIIC_PIR_EVENT_STATUS, 0x00))
+  if (!this->write_byte(QWIIC_PIR_EVENT_STATUS, 0x00)) {
    ESP_LOGW(TAG, "Failed to clear events");
+  }
 }

 }  // namespace esphome::qwiic_pir
@@ -55,8 +55,9 @@ void RD03DComponent::setup() {
 void RD03DComponent::dump_config() {
  ESP_LOGCONFIG(TAG, "RD-03D:");
  if (this->tracking_mode_.has_value()) {
-    ESP_LOGCONFIG(TAG, "  Tracking Mode: %s",
-                  *this->tracking_mode_ == TrackingMode::SINGLE_TARGET ? "single" : "multi");
+    ESP_LOGCONFIG(
+        TAG, "  Tracking Mode: %s",
+        *this->tracking_mode_ == TrackingMode::SINGLE_TARGET ? LOG_STR_LITERAL("single") : LOG_STR_LITERAL("multi"));
  }
  if (this->throttle_ > 0) {
    ESP_LOGCONFIG(TAG, "  Throttle: %" PRIu32 "ms", this->throttle_);
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
J. Nick Koston	8f280abdbd	Merge remote-tracking branch 'origin/dev' into web-server-offline-hint	2026-09-02 11:34:21 +02:00
esphome[bot]	da16c01351	[ci] Refresh integration test durations (#18944 )	2026-09-02 09:32:47 +00:00
Jesse Hills	6099ac7b53	[core] Document C++ conventions in AGENTS.md that reviews keep catching (#18941 )	2026-09-02 11:17:22 +02:00
dependabot[bot]anddependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	b8480b8424	Bump pylint from 4.0.7 to 4.0.8 (#18935 ) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2026-09-01 21:36:49 -04:00
dependabot[bot]anddependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	8bef5b22e1	Bump zeroconf from 0.150.4 to 0.151.2 (#18934 ) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2026-09-01 21:36:04 -04:00
Jakepre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>Jesse Hills	379e077b5f	[ds1603l] New sensor DS1603L V1.0 (#13133 ) Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com> Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>	2026-09-02 10:05:56 +12:00
J. Nick KostonandJesse Hills	3f68930001	[ota] Add Noise encryption to the OTA platform (#18489 ) Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>	2026-09-02 08:11:57 +12:00
Andrej Walilko Andrej Walilko Jesse Hills	0aff9e1c54	[d01] add D01 pm2.5 sensor support (#17788 ) Co-authored-by: Andrej Walilko <awalilko@liquidweb.com> Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>	2026-09-02 07:33:35 +12:00
ZebbleandClaude	f9824ee83f	[core] Move CONF_KEYS to the shared component constants (#18933 ) Co-authored-by: Claude <noreply@anthropic.com>	2026-09-01 14:23:21 -04:00
Oliver Kleinecke Oliver Kleineckepre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>Jonathan Swoboda	68ffd5a773	[safe_mode] Uncover silent error in safe-mode (#18749 ) Co-authored-by: Oliver Kleinecke <kleinecke.oliver@googlemail.com> Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com> Co-authored-by: Jonathan Swoboda <154711427+swoboda1337@users.noreply.github.com>	2026-09-01 09:12:49 -04:00
Clyde Stubbs Claude Sonnet 5 Copilot Autofix powered by AI	fe3788ff47	[esp32][mipi_rgb] Add ESP32-S31 support for execute_from_psram (#18929 ) Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com> Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>	2026-09-01 08:56:03 -04:00
J. Nick Koston	d6758377d1	[core] Clone git libraries in parallel in the library prefetch (#18836 )	2026-09-01 14:25:58 +12:00
Jesse Hills	5dbc8ffe4c	[epaper_spi] Add UC8179 mono driver and Seeed reTerminal E1001 model (#17568 )	2026-09-01 14:17:52 +12:00
J. Nick Koston	0f982f03b2	[core] Prefetch tool-scons by PlatformIO's core spec (#18831 )	2026-09-01 11:55:53 +12:00
Bonne Eggleston	afb0022dd0	[core] Lint: require braces around single ESP_LOG control-statement bodies (#18727 )	2026-09-01 11:53:39 +12:00
dependabot[bot]dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>Jonathan Swoboda	081ef3d30d	Bump prek from 0.4.14 to 0.5.0 (#18921 ) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Jonathan Swoboda <154711427+swoboda1337@users.noreply.github.com>	2026-08-31 17:46:47 -04:00
Jonathan Swoboda	ca44db107c	[docker] Fix generate_tags.py formatting (#18928 )	2026-08-31 17:33:52 -04:00
dependabot[bot]anddependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	d437869373	Bump cryptography from 48.0.1 to 50.0.1 (#18922 ) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2026-08-31 17:23:29 -04:00
dependabot[bot]anddependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	c20b619684	Bump platformdirs from 4.11.4 to 4.11.5 (#18923 ) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2026-08-31 17:20:43 -04:00
dependabot[bot]anddependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	ebe6c2d049	Bump github/codeql-action/init from 4.37.8 to 4.37.9 (#18927 ) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2026-08-31 17:20:12 -04:00
dependabot[bot]anddependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	78beb75b3b	Bump github/codeql-action/analyze from 4.37.8 to 4.37.9 (#18926 ) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2026-08-31 17:20:00 -04:00
dependabot[bot]anddependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	fc9afcb201	Bump ruff from 0.16.4 to 0.16.5 (#18920 ) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2026-08-31 17:17:58 -04:00
dependabot[bot]anddependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	7a784d1135	Bump zeroconf from 0.150.0 to 0.150.4 (#18924 ) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2026-08-31 17:16:22 -04:00
Clyde Stubbs	24af3fd834	[lvgl] Fix user_ flags (#18902 )	2026-09-01 07:13:36 +10:00
Clyde Stubbs	61e37cfc86	[docker] Use GITHUB_REPOSITORY instead of hardcoded esphome/esphome (#18916 )	2026-09-01 07:01:53 +10:00
J. Nick Koston	ea1e0c6f68	[core] Keep scheduler dump cancelled marker string in flash on ESP8266 (#18906 )	2026-08-31 13:27:53 -05:00
J. Nick Koston	1ba1aebfa1	[ci] Balance integration test buckets by recorded durations (#18895 )	2026-08-31 13:20:47 -05:00
J. Nick Koston	5d56517e14	[api] Keep action dropped warning strings in flash on ESP8266 (#18905 )	2026-08-31 13:19:49 -05:00
J. Nick Koston	ad69718ecc	[core] Configure the platform again after prefetching its packages (#18830 )	2026-08-31 13:01:13 -05:00
mfishmaandpre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>	06d477bea7	[whynter] Fix truncating Fahrenheit temps that should be rounded (#18813 ) Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>	2026-08-31 13:47:55 -04:00
Brandon Harvey	bbe806f1e6	[sen6x] Add VOC/NOx algorithm tuning (#18779 )	2026-08-31 13:45:38 -04:00
Jonathan Swoboda	813c000684	[adc] Add ESP32-S31 support (#18887 )	2026-08-31 08:51:33 -04:00
Clyde Stubbs Claude Sonnet 5 Copilot Autofix powered by AI	2890afe0e5	[esp32] Fix S31 reserved pins (#18915 ) Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com> Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>	2026-08-31 12:38:20 +00:00
Clyde Stubbs	5e58b312e2	[mipi_rgb] Add ESP32S31 support (#18914 )	2026-08-31 07:20:20 -04:00
Jonathan Swoboda	575a540c9f	[esp32] Fix ESP32-S31 GPIO validation (#18904 )	2026-08-31 07:19:20 -04:00
J. Nick Koston	404da26a37	[core] Keep conditional log string literals in flash on ESP8266 (#18907 )	2026-08-31 21:08:05 +12:00
Jesse Hills	be54a5c403	Merge branch 'release' into dev	2026-08-31 14:23:06 +12:00
Jesse Hills	8b5c06add6	Merge pull request #18900 from esphome/bump-2026.8.2 2026.8.2	2026-08-31 14:22:42 +12:00
Keith BurzinskiandJ. Nick Koston	7b97c87390	[improv_serial] Support non-Wi-Fi network interfaces (#17598 ) Co-authored-by: J. Nick Koston <nick@koston.org>	2026-08-30 20:43:59 -05:00
Jesse Hills	0e4f460013	Bump version to 2026.8.2	2026-08-31 11:25:12 +12:00
esphome[bot]	4e0a5e5a5b	Bump bundled esphome-device-builder to 1.13.1 (#18807 )	2026-08-31 11:25:10 +12:00
J. Nick Koston	20d4fe1a41	[mdns] Skip MDNS.update() while the ESP8266 radio cannot transmit (#18785 )	2026-08-31 11:25:10 +12:00
Clyde Stubbs	8929fc43d8	[mipi_spi] Fix dimensions for jc3636518v2 (#18786 )	2026-08-31 11:25:10 +12:00
J. Nick KostonandCopilot Autofix powered by AI	c75252d425	[http_request] Default watchdog_timeout from timeout on ESP32 (#18732 ) Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>	2026-08-31 11:24:51 +12:00
Clyde StubbsandClaude Sonnet 5	ae460b430c	[lvgl] Fix on_value/on_update triggers for LVGL select entities (#18778 ) Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>	2026-08-31 11:22:13 +12:00
esphome[bot]	82ca5365c9	Bump bundled esphome-device-builder to 1.13.0 (#18743 )	2026-08-31 11:22:13 +12:00
J. Nick Koston	a5d8c45b67	[gpio] Fix one_wire reset busy-waiting with interrupts off when delay wraps (#18733 )	2026-08-31 11:22:13 +12:00
J. Nick Koston	67f7532940	[espidf] Always reconfigure after component discovery (#18730 )	2026-08-31 11:22:06 +12:00
J. Nick Koston	8a88a3f576	Merge remote-tracking branch 'origin/dev' into web-server-offline-hint	2026-08-26 19:48:45 -05:00
J. Nick Koston	82431641cc	Merge remote-tracking branch 'origin/web-server-offline-hint' into web-server-offline-hint	2026-08-25 12:42:27 -05:00
J. Nick Koston	f79e9f9cb1	Merge remote-tracking branch 'origin/dev' into web-server-offline-hint # Conflicts: # esphome/components/web_server/__init__.py # esphome/components/web_server_base/__init__.py	2026-08-25 12:41:34 -05:00
J. Nick Koston	f17fd9fcb3	Merge remote-tracking branch 'origin/dev' into web-server-offline-hint	2026-08-23 18:33:35 -05:00
J. Nick Koston	07f091059c	[web_server] Match the blank page remedy to the actual cause	2026-08-19 17:23:25 -05:00
J. Nick Koston	2807a6932b	Merge branch 'dev' into web-server-offline-hint	2026-08-19 16:49:33 -05:00
J. Nick Koston	ec09ce636c	[web_server] Announce captive mode for explicit local: true too	2026-08-19 16:48:16 -05:00
J. Nick Koston	7f437aa680	[web_server] Surface implied behavior changes and honor manual_ip in the port warning	2026-08-19 16:09:27 -05:00
J. Nick Koston	f8a60d0259	[web_server] Address review: tighter socket auto-load, flash cost in the log, fallback compile test	2026-08-19 15:26:11 -05:00
J. Nick Koston	50f50aa7e0	[web_server] Limit captive mode to port 80 and hint at the manual URL otherwise	2026-08-19 15:22:04 -05:00
J. Nick Koston	676ecae469	[wifi][web_server] Guard AP portal helpers with USE_WIFI_AP and apply review cleanups	2026-08-19 14:40:35 -05:00
J. Nick Koston	78258dc554	[wifi] Declare the AP portal helpers for builds without an access point	2026-08-19 14:30:46 -05:00
J. Nick Koston	55180938ca	[web_server] Keep AUTO_LOAD static so web_server_base loads before ota.web_server	2026-08-19 14:21:17 -05:00
J. Nick Koston	d88a95c3f6	[web_server] Share the captive DNS server, use the not-found fallback for probes, fold portal hooks in wifi	2026-08-19 14:15:06 -05:00
J. Nick Koston	4dad932cd8	[web_server] Self contained AP mode: embed the interface and act as captive portal	2026-08-19 14:00:43 -05:00
J. Nick Koston	3b8b90b2cd	[web_server] Embed the interface and warn for AP only WiFi instead of hinting in the page	2026-08-19 13:42:52 -05:00
J. Nick Koston	9df8505c8d	[web_server] Show the offline hint on a timer so a stalled download is covered too	2026-08-19 13:25:51 -05:00
J. Nick Koston	427b83dc0a	[web_server] Move the AP only warning into web_server and emit the script tag once	2026-08-19 13:07:19 -05:00
J. Nick Koston	deb641d413	[wifi] Warn when an AP only config serves the hosted web_server page	2026-08-19 13:02:59 -05:00
J. Nick Koston	0b3e399588	[web_server] Shorten the offline hint	2026-08-19 12:59:40 -05:00
J. Nick Koston	33d9adbef1	[web_server] Only add the offline hint without captive_portal	2026-08-19 12:57:58 -05:00
J. Nick Koston	88d6ded5f3	[web_server] Show a hint when the hosted web interface cannot be downloaded	2026-08-19 12:51:51 -05:00