Compare commits

...
Author SHA1 Message Date
J. Nick Koston cd8b913aa4 Prefix the test enum values with their enum name 2026-11-17 16:33:41 -06:00
J. Nick Koston da9a6cc6c0 Test the 64-bit clamp with a 32-bit index type 2026-11-17 16:07:15 -06:00
J. Nick Koston 95ec16c7ce Sign-extend narrow signed indexes and clamp 64-bit ones 2026-11-17 15:44:08 -06:00
J. Nick Koston 5593d8295a Range check inside the lookup and accept enum fallbacks 2026-11-17 15:33:26 -06:00
J. Nick Koston 0a164623d6 [core] Accept enums and wide integers in PROGMEM_STRING_TABLE lookups and default the fallback 2026-11-17 15:24:31 -06:00
Mattheinrichs 84dea8078b [cst816] Ignore idle 0xFF touch frames and invalid coordinates (#22435) 2026-11-17 08:58:24 -06:00
Jacopo Labardi dbf6af2fd7 [logger] Qualify the host clock function (#22838) 2026-11-17 08:50:19 -06:00
David Woodhouse bc6fb7082f [climate] Don't fail on a platform entry that only holds nested climates (#22844) 2026-11-17 08:49:00 -06:00
tomaszduda23andClaude cfa27cea58 [npm1300] Fix the thermistor resistance error message (#22835)
Co-authored-by: Claude <noreply@anthropic.com>
2026-11-17 17:40:04 +03:00
rwrozelleandClaude Opus 5.5 5c061f9e1e [espidf] Hide the ccache binary in the forced-on, no-binary test (#22842)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 09:29:34 -05:00
Jesse Hills 34b24d0cf5 Merge branch 'beta' into dev 2026-11-17 22:25:16 +13:00
Jesse Hills e27614fda3 Merge pull request #22833 from esphome/bump-2026.11.0b6
2026.11.0b6
2026-11-17 22:24:55 +13:00
J. Nick Koston 8426d04138 [api] Make the event order backpressure test wait until the pipe is full (#22112) 2026-11-17 21:09:01 +13:00
641c8bedc9 [npm1300] Use datasheet defaults, require the thermistor setting for charging, fix charger status (#22769)
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: J. Nick Koston <nick@home-assistant.io>
2026-11-17 09:00:10 +01:00
Jesse Hills 4a39ca1b71 Fix 2026-11-17 20:54:40 +13:00
Jesse Hills 4a218fdbd8 Remove extra test 2026-11-17 20:47:40 +13:00
Jesse Hills d8fc1cd214 Bump version to 2026.11.0b6 2026-11-17 18:54:23 +13:00
J. Nick Koston 1e030b7371 [modem] Set the APN while the SIM is powered down (#22817) 2026-11-17 18:54:20 +13:00
J. Nick Koston 3b113f2c39 [wifi] Join the next network after a failed hidden network probe on ESP32 (#22764) 2026-11-17 18:54:20 +13:00
J. Nick Koston 73468592a9 [remote_base] Fix the Haier and Mirage remote_receiver binary sensors failing to compile 2026-11-17 18:54:06 +13:00
Jonathan Swoboda a1b456150d [esp32][libretiny] Make delay() wait at least the requested time (#22822) 2026-11-17 18:53:11 +13:00
J. Nick Koston 865a883abb [remote_base] Fix the canalsatld binary sensor and trigger build 2026-11-17 18:53:11 +13:00
J. Nick Koston 357a6717c8 [core] Release only the lwIP core lock a LwIPLock took (#22683) 2026-11-17 18:53:11 +13:00
J. Nick Koston bcb434e05e [esp32_ble] Stop Bluedroid re-running a failed queued MTU or execute write request (#22670) 2026-11-17 18:53:11 +13:00
J. Nick Koston fb65fcc5f6 [esp32_power_management] Clamp the tick step after light sleep so it cannot trip vTaskStepTick (#22637) 2026-11-17 18:53:11 +13:00
J. Nick Koston b5e379a9d4 [uart] Stop ESP8266 software serial TX from tripping the Wi-Fi watchdog at 57600 baud (#22641) 2026-11-17 18:53:11 +13:00
J. Nick Kostonandpre-commit-ci-lite[bot] 05286dfd5d [api] Send queued entity states before DisconnectRequest on shutdown (#22625)
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
2026-11-17 18:53:11 +13:00
J. Nick Koston 36184f09aa [zephyr] Count micros() in microseconds and busy-wait in delayMicroseconds() (#22612) 2026-11-17 18:53:11 +13:00
Adam Matthews 449933891e [wifi] Clear the error flag when the adapter restart is skipped (#22797) 2026-11-17 18:53:11 +13:00
Jonathan Swoboda a5bfa6dac3 [esp32_ble] Apply the Bluedroid workarounds to the ESP-IDF 6.1 releases that need them (#22806) 2026-11-17 18:53:11 +13:00
Jonathan Swoboda 5aaa5b0552 [esp32_ble] Replace Bluedroid's sscanf callers on ESP-IDF 6 too (#22805) 2026-11-17 18:53:11 +13:00
J. Nick Koston 9ab090a818 [i2c] Refuse RP2040 writes larger than the Wire buffer instead of leaving the bus stuck (#22791) 2026-11-17 18:53:10 +13:00
J. Nick Koston 02d0bb56a6 [cc1101] Refuse begin_tx in packet mode (#22636) 2026-11-16 22:21:59 -06:00
20 changed files with 587 additions and 140 deletions

No files matched your search

+4 -10
View File
@@ -515,18 +515,12 @@ void CC1101Component::dump_config() {
}
void CC1101Component::begin_tx() {
this->wake_up();
// Read the mode before the PKTCTRL0 write below overwrites it in state_
const bool packet_mode = this->state_.PKT_FORMAT == static_cast<uint8_t>(PacketFormat::PACKET_FORMAT_FIFO);
// Ensure Packet Format is 3 (Async Serial)
this->write_(Register::PKTCTRL0, 0x32);
if (this->state_.PKT_FORMAT == static_cast<uint8_t>(PacketFormat::PACKET_FORMAT_FIFO)) {
ESP_LOGW(TAG, "begin_tx is for async serial mode; use send_packet in packet mode");
return;
}
ESP_LOGV(TAG, "Beginning TX sequence");
if (this->gdo0_pin_ != nullptr) {
// setup() only attaches the interrupt in packet mode. In async serial mode the pin may be
// shared with remote_receiver, and detaching here would remove the receiver's interrupt.
if (packet_mode) {
this->gdo0_pin_->detach_interrupt();
}
this->gdo0_pin_->pin_mode(gpio::FLAG_OUTPUT);
}
// Transition through IDLE to bypass CCA (Clear Channel Assessment) which can
@@ -63,13 +63,25 @@ void CST816Touchscreen::update_touches() {
uint8_t data[13];
if (!this->status_comm_result(this->read_bytes(REG_STATUS, data, sizeof data)))
return;
uint8_t num_of_touches = data[REG_TOUCH_NUM] & 3;
// The low nibble is the touch count. CST816/CST820 are single-touch;
// CST826/CST836 can report two points, but this driver only reads the first
// point. Some CST8xx controllers report an all-0xFF frame when idle or after
// disabling auto-sleep: the count lands above two and the coordinates are
// the 0xFFF sentinel, so both guards below reject it.
uint8_t num_of_touches = low_nibble(data[REG_TOUCH_NUM]);
if (num_of_touches == 0) {
return;
}
if (num_of_touches > 2) {
return;
}
uint16_t x = encode_uint16(low_nibble(data[REG_XPOS_HIGH]), data[REG_XPOS_LOW]);
uint16_t y = encode_uint16(low_nibble(data[REG_YPOS_HIGH]), data[REG_YPOS_LOW]);
if (x == 0x0FFF || y == 0x0FFF) {
return;
}
ESP_LOGV(TAG, "Read touch %d/%d", x, y);
this->add_raw_touch_position_(0, x, y);
}
+1 -1
View File
@@ -9,7 +9,7 @@ void HOT Logger::write_msg_(const char *msg, uint16_t len) {
char buffer[TIMESTAMP_LEN + ESPHOME_LOGGER_TX_BUFFER_SIZE + HEADROOM];
time_t rawtime;
time(&rawtime);
::time(&rawtime);
struct tm timeinfo;
localtime_r(&rawtime, &timeinfo); // Thread-safe version
size_t pos = strftime(buffer, TIMESTAMP_LEN + 1, "[%H:%M:%S]", &timeinfo);
+117 -39
View File
@@ -1,4 +1,5 @@
from collections.abc import Callable
import logging
from esphome import automation
import esphome.codegen as cg
@@ -8,6 +9,8 @@ import esphome.config_validation as cv
from esphome.const import CONF_DURATION, CONF_ID, CONF_MODE, CONF_VOLTAGE
from esphome.types import ConfigType
_LOGGER = logging.getLogger(__name__)
CODEOWNERS = ["@tomaszduda23"]
DEPENDENCIES = ["i2c"]
DOMAIN = "npm1300"
@@ -42,20 +45,18 @@ NPM1300_CHILD_SCHEMA = cv.Schema(
{cv.GenerateID(CONF_NPM1300_ID): cv.use_id(NPM1300Component)}
)
# Status registers read on each update: VBUSINSTATUS, BCHGCHARGESTATUS and BCHGERRREASON
NPM1300Status = npm1300_ns.struct("NPM1300Status")
# The status registers read on each update
STATUS_PUBLISHER = cg.HubFunction(
"status",
cg.void,
[
(cg.uint8, "vbus_status"),
(cg.uint8, "charge_status"),
(cg.uint8, "error_reason"),
],
[(NPM1300Status.operator("const").operator("ref"), "status")],
define="USE_NPM1300_STATUS_PUBLISHER",
)
VBUS_STATUS = STATUS_PUBLISHER.param("vbus_status")
CHARGE_STATUS = STATUS_PUBLISHER.param("charge_status")
ERROR_REASON = STATUS_PUBLISHER.param("error_reason")
STATUS = STATUS_PUBLISHER.param("status")
VBUS_STATUS = STATUS.vbus
CHARGE_STATUS = STATUS.charge
ERROR_REASON = STATUS.error_reason
# The ADC results and the amperes per code of the battery current
DATA_PUBLISHER = cg.HubFunction(
"data",
@@ -77,7 +78,10 @@ OUTPUTS = NPM1300Output.options(
# Written for a field the YAML leaves out
NPM1300_UNSET = 0xFF
# ADCNTCRSEL codes, by kiloohms
THERMISTOR_NONE = "none"
THERMISTOR_RESISTANCES = {10: 1, 47: 2, 100: 3}
# B25/50 of the thermistors the product specification lists for each resistance, by kiloohms
THERMISTOR_BETAS = {10: 3380, 47: 4050, 100: 4250}
LDO_MODES = {"load_switch": 0, "ldo": 1}
TERMINATION_CURRENTS = {"10%": 0, "20%": 1}
# BCHGVTRICKLESEL, by millivolts
@@ -101,14 +105,13 @@ def _one_of_units(
validator: Callable[[object], float],
allowed: list[int],
unit: str,
scale: float = 1000,
) -> Callable[[object], float]:
"""Validate a quantity with `validator` and accept only the listed values, given in units * `scale`."""
"""Validate a quantity with `validator` and accept only the listed values, given in thousandths of `unit`."""
def validate(value: object) -> float:
value = validator(value)
if round(value * scale) not in allowed:
options = ", ".join(f"{v / scale:g}{unit}" for v in allowed)
if _millis(value) not in allowed:
options = ", ".join(f"{v / 1000:g}{unit}" for v in allowed)
raise cv.Invalid(f"Must be one of {options}")
return value
@@ -135,6 +138,23 @@ def _stepped(
return validate
def _thermistor_resistance(value: object) -> float | str:
if isinstance(value, str) and value.lower() == THERMISTOR_NONE:
return THERMISTOR_NONE
value = cv.resistance(value)
if round(value) not in (kilohms * 1000 for kilohms in THERMISTOR_RESISTANCES):
options = ", ".join(f"{kilohms}kOhm" for kilohms in THERMISTOR_RESISTANCES)
raise cv.Invalid(f"Must be one of {options} or {THERMISTOR_NONE}")
return value
def thermistor_beta(config: ConfigType) -> int:
"""The B constant of the hub's thermistor: the configured one, or the one listed for its resistance."""
if (beta := config.get(CONF_THERMISTOR_BETA)) is not None:
return beta
return THERMISTOR_BETAS[round(config[CONF_THERMISTOR_RESISTANCE] / 1000)]
OUTPUT_VOLTAGE = _stepped(cv.voltage, 1000, 3300, 100, "V")
VBUS_CURRENT_LIMIT = _stepped(cv.current, 100, 1500, 100, "A")
@@ -150,15 +170,58 @@ LDO_SCHEMA = BUCK_SCHEMA.extend(
}
)
CHARGER_SCHEMA = cv.Schema(
WARM_TERMINATION_VOLTAGE_DEFAULT = 3.6
def _warm_termination_default(config: ConfigType) -> ConfigType:
"""Keep the default warm termination voltage at or below the termination voltage.
Warn when the default stays below a higher termination voltage.
"""
if (
not isinstance(config, dict)
or CONF_WARM_TERMINATION_VOLTAGE in config
or CONF_TERMINATION_VOLTAGE not in config
):
return config
try:
termination = cv.voltage(config[CONF_TERMINATION_VOLTAGE])
except cv.Invalid:
# The schema reports it
return config
if termination < WARM_TERMINATION_VOLTAGE_DEFAULT - 0.001:
# A warm battery is never charged higher than a cool one
return {
**config,
CONF_WARM_TERMINATION_VOLTAGE: config[CONF_TERMINATION_VOLTAGE],
}
if termination > WARM_TERMINATION_VOLTAGE_DEFAULT + 0.001:
_LOGGER.warning(
"npm1300 '%s' is not set, so a warm battery (45 °C to 60 °C by default) stops "
"charging at %.2fV instead of the %.2fV of '%s'. Set '%s' to the value your "
"battery allows when warm",
CONF_WARM_TERMINATION_VOLTAGE,
WARM_TERMINATION_VOLTAGE_DEFAULT,
termination,
CONF_TERMINATION_VOLTAGE,
CONF_WARM_TERMINATION_VOLTAGE,
)
return config
_CHARGER_SETTINGS_SCHEMA = cv.Schema(
{
cv.Required(CONF_CHARGE_CURRENT): _stepped(cv.current, 32, 800, 2, "A"),
cv.Optional(CONF_TERMINATION_VOLTAGE, default="4.2V"): _one_of_units(
cv.voltage, TERMINATION_VOLTAGES, "V"
# Defaults are the reset values of the product specification
cv.Optional(CONF_CHARGE_CURRENT, default="32mA"): _stepped(
cv.current, 32, 800, 2, "A"
),
cv.Optional(CONF_WARM_TERMINATION_VOLTAGE): _one_of_units(
cv.Optional(CONF_TERMINATION_VOLTAGE, default="3.6V"): _one_of_units(
cv.voltage, TERMINATION_VOLTAGES, "V"
),
cv.Optional(
CONF_WARM_TERMINATION_VOLTAGE,
default=f"{WARM_TERMINATION_VOLTAGE_DEFAULT}V",
): _one_of_units(cv.voltage, TERMINATION_VOLTAGES, "V"),
cv.Optional(CONF_TERMINATION_CURRENT, default="10%"): cv.enum(
TERMINATION_CURRENTS
),
@@ -169,22 +232,37 @@ CHARGER_SCHEMA = cv.Schema(
cv.current, list(DISCHARGE_CURRENT_LIMITS), "A"
),
cv.Optional(CONF_RECHARGE, default=True): cv.boolean,
cv.Optional(CONF_ENABLED, default=True): cv.boolean,
cv.Optional(CONF_ENABLED, default=False): cv.boolean,
}
)
CHARGER_SCHEMA = cv.All(_warm_termination_default, _CHARGER_SETTINGS_SCHEMA)
CONFIG_SCHEMA = (
def _check_thermistor(config: ConfigType) -> ConfigType:
"""A wrong thermistor shifts the battery temperature the charger sees, so charging needs one chosen."""
resistance = config.get(CONF_THERMISTOR_RESISTANCE)
if CONF_CHARGER in config and resistance is None:
raise cv.Invalid(
f"'{CONF_THERMISTOR_RESISTANCE}' is required with '{CONF_CHARGER}': set the nominal "
f"resistance of the battery thermistor, or '{THERMISTOR_NONE}'",
path=[CONF_THERMISTOR_RESISTANCE],
)
if CONF_THERMISTOR_BETA in config and resistance in (None, THERMISTOR_NONE):
raise cv.Invalid(
f"'{CONF_THERMISTOR_BETA}' needs '{CONF_THERMISTOR_RESISTANCE}' set to the "
"resistance of the thermistor",
path=[CONF_THERMISTOR_BETA],
)
return config
CONFIG_SCHEMA = cv.All(
cv.Schema(
{
cv.GenerateID(): cv.declare_id(NPM1300Component),
cv.Optional(CONF_VBUS_CURRENT_LIMIT): VBUS_CURRENT_LIMIT,
cv.Optional(CONF_THERMISTOR_RESISTANCE): _one_of_units(
cv.resistance, list(THERMISTOR_RESISTANCES), "kOhm", scale=0.001
),
cv.Optional(CONF_THERMISTOR_BETA, default=3380): cv.int_range(
min=1, max=65535
),
cv.Optional(CONF_THERMISTOR_RESISTANCE): _thermistor_resistance,
cv.Optional(CONF_THERMISTOR_BETA): cv.int_range(min=1, max=65535),
cv.Optional(CONF_CHARGER): CHARGER_SCHEMA,
cv.Optional(CONF_BUCK1): BUCK_SCHEMA,
cv.Optional(CONF_BUCK2): BUCK_SCHEMA,
@@ -193,7 +271,8 @@ CONFIG_SCHEMA = (
}
)
.extend(cv.polling_component_schema("60s"))
.extend(i2c.i2c_device_schema(0x6B))
.extend(i2c.i2c_device_schema(0x6B)),
_check_thermistor,
)
@@ -208,7 +287,7 @@ def _vbus_current_limit_code(amps: float) -> int:
def _charger_config(config: ConfigType) -> cg.StructInitializer:
termination = _termination_voltage_code(config[CONF_TERMINATION_VOLTAGE])
warm = config.get(CONF_WARM_TERMINATION_VOLTAGE)
warm = _termination_voltage_code(config[CONF_WARM_TERMINATION_VOLTAGE])
return cg.StructInitializer(
NPM1300ChargerConfig,
("current", _millis(config[CONF_CHARGE_CURRENT]) // 2),
@@ -217,10 +296,7 @@ def _charger_config(config: ConfigType) -> cg.StructInitializer:
DISCHARGE_CURRENT_LIMITS[_millis(config[CONF_DISCHARGE_CURRENT_LIMIT])],
),
("termination_voltage", termination),
(
"warm_termination_voltage",
termination if warm is None else _termination_voltage_code(warm),
),
("warm_termination_voltage", warm),
("trickle_voltage", TRICKLE_VOLTAGES[_millis(config[CONF_TRICKLE_VOLTAGE])]),
("termination_current", TERMINATION_CURRENTS[config[CONF_TERMINATION_CURRENT]]),
("recharge", config[CONF_RECHARGE]),
@@ -247,6 +323,13 @@ def _output_config(config: ConfigType | None) -> cg.StructInitializer:
def _config(config: ConfigType) -> cg.StructInitializer:
charger = config.get(CONF_CHARGER)
resistance = config.get(CONF_THERMISTOR_RESISTANCE)
if resistance is None:
thermistor, beta = NPM1300_UNSET, 0
elif resistance == THERMISTOR_NONE:
thermistor, beta = 0, 0
else:
thermistor = THERMISTOR_RESISTANCES[round(resistance / 1000)]
beta = thermistor_beta(config)
return cg.StructInitializer(
NPM1300Config,
(
@@ -254,13 +337,8 @@ def _config(config: ConfigType) -> cg.StructInitializer:
cg.ArrayInitializer(*(_output_config(config.get(key)) for key in OUTPUTS)),
),
("charger", None if charger is None else _charger_config(charger)),
("thermistor_beta", config[CONF_THERMISTOR_BETA]),
(
"thermistor",
NPM1300_UNSET
if resistance is None
else THERMISTOR_RESISTANCES[round(resistance / 1000)],
),
("thermistor_beta", beta),
("thermistor", thermistor),
("charger_configured", charger is not None),
)
+51 -34
View File
@@ -29,6 +29,7 @@ static constexpr uint16_t REG_BCHG_VTERM = 0x030C;
static constexpr uint16_t REG_BCHG_VTERM_R = 0x030D;
static constexpr uint16_t REG_BCHG_VTRICKLE_SEL = 0x030E;
static constexpr uint16_t REG_BCHG_ITERM_SEL = 0x030F;
static constexpr uint16_t REG_BCHG_NTC_STATUS = 0x0332;
static constexpr uint16_t REG_BCHG_CHARGE_STATUS = 0x0334;
static constexpr uint16_t REG_BCHG_ERR_REASON = 0x0336;
static constexpr uint16_t REG_BUCK1_ENA_SET = 0x0400;
@@ -53,6 +54,9 @@ static constexpr uint16_t REG_SHIP_TASK_SHIP_MODE = 0x0B02;
// VBUSINSTATUS
static constexpr uint8_t VBUS_PRESENT = 0x01;
// NTCSTATUS
static constexpr uint8_t NTC_STATUS_COLD = 0x01;
static constexpr uint8_t NTC_STATUS_HOT = 0x08;
// BCHGCHARGESTATUS; bit 0 (battery detected) is reserved since C00 silicon
static constexpr uint8_t CHARGE_STATUS_COMPLETED = 0x02;
static constexpr uint8_t CHARGE_STATUS_TRICKLE = 0x04;
@@ -107,26 +111,36 @@ float ntc_temperature(uint16_t code, float inv_beta) {
#endif
#ifdef USE_TEXT_SENSOR
PROGMEM_STRING_TABLE(ChargerStatusStrings, "Error", "Paused, Die Too Hot", "Charge Complete", "Trickle Charge",
"Constant Current", "Constant Voltage", "Discharging", "Not Charging");
// BCHGCHARGESTATUS bits in order of priority; bit i is reported as string i + 1
PROGMEM_STRING_TABLE(ChargerStatusStrings, "Discharging", "Error", "Disabled", "Paused, PMIC Too Hot",
"Charge Complete", "Trickle Charge", "Constant Current", "Constant Voltage",
"Paused, Battery Too Cold", "Paused, Battery Too Hot", "Not Charging");
static constexpr uint8_t CHARGER_STATUS_FIRST_BIT = 3;
// BCHGCHARGESTATUS bits in order of priority, reported from string CHARGER_STATUS_FIRST_BIT on
static const uint8_t CHARGER_STATUS_BITS[] PROGMEM = {CHARGE_STATUS_DIE_TEMP_HIGH, CHARGE_STATUS_COMPLETED,
CHARGE_STATUS_TRICKLE, CHARGE_STATUS_CONSTANT_CURRENT,
CHARGE_STATUS_CONSTANT_VOLTAGE};
static uint8_t charger_status_index(uint8_t vbus_status, uint8_t charge_status, uint8_t error_reason) {
if (error_reason != 0)
static uint8_t charger_status_index(const NPM1300Status &status) {
if ((status.vbus & VBUS_PRESENT) == 0)
return 0;
if (status.error_reason != 0)
return 1;
if ((status.charger_enable & 1) == 0)
return 2;
for (size_t i = 0; i < sizeof(CHARGER_STATUS_BITS); i++) {
if ((charge_status & progmem_read_byte(&CHARGER_STATUS_BITS[i])) != 0)
return i + 1;
if ((status.charge & progmem_read_byte(&CHARGER_STATUS_BITS[i])) != 0)
return CHARGER_STATUS_FIRST_BIT + i;
}
return (vbus_status & VBUS_PRESENT) == 0 ? 6 : 7;
// The charger stops without an error outside the cold and hot limits of the battery temperature
if ((status.ntc & NTC_STATUS_COLD) != 0)
return 8;
if ((status.ntc & NTC_STATUS_HOT) != 0)
return 9;
return 10;
}
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, uint8_t vbus_status, uint8_t charge_status,
uint8_t error_reason) {
const uint8_t index = charger_status_index(vbus_status, charge_status, error_reason);
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, const NPM1300Status &status) {
const uint8_t index = charger_status_index(status);
if (index == last)
return;
last = index;
@@ -198,7 +212,7 @@ bool NPM1300Component::configure_charger_(const NPM1300Config &config) {
split_9bit(charger.discharge_limit, discharge);
uint8_t disable = charger.recharge ? 0 : CHARGER_DISABLE_RECHARGE;
// Without a thermistor the charger reports an NTC error and does not charge
if (config.thermistor == NPM1300_UNSET)
if (config.thermistor == 0 || config.thermistor == NPM1300_UNSET)
disable |= CHARGER_DISABLE_NTC;
const uint8_t enable = (CHARGER_DISABLE_RECHARGE | CHARGER_DISABLE_NTC) & ~disable;
if (this->write_register16(REG_BCHG_ISET_MSB, current, sizeof(current)) != i2c::ERROR_OK ||
@@ -292,33 +306,40 @@ void NPM1300Component::hibernate(uint32_t duration_ms) {
}
void NPM1300Component::update() {
uint8_t vbus_status;
uint8_t charge_status;
uint8_t error_reason;
if (!this->status_comm_check(this->read_byte_reg16(REG_VBUSIN_STATUS, &vbus_status) &&
this->read_byte_reg16(REG_BCHG_CHARGE_STATUS, &charge_status) &&
this->read_byte_reg16(REG_BCHG_ERR_REASON, &error_reason)))
NPM1300Status status;
// NTCSTATUS, DIETEMPSTATUS and BCHGCHARGESTATUS
uint8_t charger_status[3];
if (!this->status_comm_check(this->read_byte_reg16(REG_VBUSIN_STATUS, &status.vbus) &&
this->read_byte_reg16(REG_BCHG_ENABLE_SET, &status.charger_enable) &&
this->read_register16(REG_BCHG_NTC_STATUS, charger_status, sizeof(charger_status)) ==
i2c::ERROR_OK &&
this->read_byte_reg16(REG_BCHG_ERR_REASON, &status.error_reason)))
return;
status.ntc = charger_status[0];
status.charge = charger_status[2];
// Without a thermistor the NTC pin is grounded and can read as a hot battery
if (progmem_read_byte(&this->config_->thermistor) == 0)
status.ntc = 0;
// The chip goes back to its default VBUS current limit whenever VBUS is removed
const bool vbus_present = (vbus_status & VBUS_PRESENT) != 0;
const bool vbus_present = (status.vbus & VBUS_PRESENT) != 0;
if (vbus_present && !this->vbus_present_ && this->vbus_current_limit_ != NPM1300_UNSET &&
!this->status_comm_check(this->apply_vbus_current_limit_()))
return;
this->vbus_present_ = vbus_present;
if (error_reason != this->last_error_reason_) {
this->last_error_reason_ = error_reason;
if (error_reason != 0) {
ESP_LOGW(TAG, "Charger error, BCHGERRREASON 0x%02X", error_reason);
if (status.error_reason != this->last_error_reason_) {
this->last_error_reason_ = status.error_reason;
if (status.error_reason != 0) {
ESP_LOGW(TAG, "Charger error, BCHGERRREASON 0x%02X", status.error_reason);
}
}
#ifdef USE_NPM1300_STATUS_PUBLISHER
if (this->status_publisher_ != nullptr)
this->status_publisher_(vbus_status, charge_status, error_reason);
this->status_publisher_(status);
#endif
#ifdef USE_SWITCH
if (!this->status_comm_check(this->publish_switches_()))
if (!this->status_comm_check(this->publish_switches_(status)))
return;
#endif
@@ -348,16 +369,10 @@ void NPM1300Component::update() {
}
#ifdef USE_SWITCH
bool NPM1300Component::publish_switches_() {
bool NPM1300Component::publish_switches_(const NPM1300Status &status) {
PUBLISH_STATE(this->charger_switch_, (status.charger_enable & 1) != 0);
uint8_t value;
bool ok = true;
if (this->charger_switch_ != nullptr) {
if (this->read_byte_reg16(REG_BCHG_ENABLE_SET, &value)) {
this->charger_switch_->publish_state((value & 1) != 0);
} else {
ok = false;
}
}
switch_::Switch *const bucks[2] = {this->buck1_switch_, this->buck2_switch_};
if (bucks[0] != nullptr || bucks[1] != nullptr) {
if (this->read_byte_reg16(REG_BUCK_STATUS, &value)) {
@@ -461,7 +476,9 @@ void NPM1300Component::dump_config() {
ESP_LOGCONFIG(TAG, " Enabled at boot: %s", YESNO(output.enabled != 0));
}
}
if (config.thermistor != NPM1300_UNSET) {
if (config.thermistor == 0) {
ESP_LOGCONFIG(TAG, " Thermistor: none");
} else if (config.thermistor != NPM1300_UNSET) {
ESP_LOGCONFIG(TAG, " Thermistor B constant: %u", config.thermistor_beta);
}
#ifdef USE_SENSOR
+13 -5
View File
@@ -54,10 +54,19 @@ struct NPM1300Config {
NPM1300OutputConfig outputs[NPM1300_OUTPUT_COUNT];
NPM1300ChargerConfig charger; // only applied when charger_configured
uint16_t thermistor_beta;
uint8_t thermistor; // ADCNTCRSEL code: 1 for 10 kOhm, 2 for 47 kOhm, 3 for 100 kOhm, or NPM1300_UNSET
uint8_t thermistor; // ADCNTCRSEL code: 0 for none, 1 for 10 kOhm, 2 for 47 kOhm, 3 for 100 kOhm, or NPM1300_UNSET
bool charger_configured;
};
/// The status registers read on every update
struct NPM1300Status {
uint8_t vbus; // VBUSINSTATUS
uint8_t charger_enable; // BCHGENABLESET
uint8_t ntc; // NTCSTATUS
uint8_t charge; // BCHGCHARGESTATUS
uint8_t error_reason; // BCHGERRREASON
};
#ifdef USE_NPM1300_DATA_PUBLISHER
/// The 10-bit ADC result whose high 8 bits are adc[msb] and low 2 bits are at `shift` in adc[lsbs]
inline uint16_t adc_code(const uint8_t *adc, uint8_t msb, uint8_t lsbs, uint8_t shift) {
@@ -68,8 +77,7 @@ float ntc_temperature(uint16_t code, float inv_beta);
#endif
#ifdef USE_TEXT_SENSOR
/// Publish the charger status text, only when it differs from `last`
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, uint8_t vbus_status, uint8_t charge_status,
uint8_t error_reason);
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, const NPM1300Status &status);
#endif
class NPM1300Component : public PollingComponent, public i2c::I2CDevice {
@@ -95,7 +103,7 @@ class NPM1300Component : public PollingComponent, public i2c::I2CDevice {
float get_setup_priority() const override { return setup_priority::BUS - 1.0f; }
#ifdef USE_NPM1300_STATUS_PUBLISHER
HUB_PUBLISHER(status, uint8_t, uint8_t, uint8_t)
HUB_PUBLISHER(status, const NPM1300Status &)
#endif
#ifdef USE_NPM1300_DATA_PUBLISHER
HUB_PUBLISHER(data, const uint8_t *, float)
@@ -128,7 +136,7 @@ class NPM1300Component : public PollingComponent, public i2c::I2CDevice {
#endif
#ifdef USE_SWITCH
/// Returns false when a status read failed
bool publish_switches_();
bool publish_switches_(const NPM1300Status &status);
#endif
const NPM1300Config *config_;
+6 -5
View File
@@ -21,7 +21,6 @@ from esphome.types import ConfigType
from . import (
ADC,
CONF_NPM1300_ID,
CONF_THERMISTOR_BETA,
CONF_THERMISTOR_RESISTANCE,
CONF_VBUS_CURRENT_LIMIT,
DATA_PUBLISHER,
@@ -30,7 +29,9 @@ from . import (
DUMP_TAG,
IBAT_SCALE,
NPM1300_CHILD_SCHEMA,
THERMISTOR_NONE,
npm1300_ns,
thermistor_beta,
)
DEPENDENCIES = ["npm1300"]
@@ -109,10 +110,10 @@ def _final_validate(config: ConfigType) -> None:
if CONF_BATTERY_TEMPERATURE not in config:
return
hub = fv.get_declaring_config(config[CONF_NPM1300_ID])
if CONF_THERMISTOR_RESISTANCE not in hub:
if hub.get(CONF_THERMISTOR_RESISTANCE, THERMISTOR_NONE) == THERMISTOR_NONE:
raise cv.Invalid(
f"'{CONF_BATTERY_TEMPERATURE}' needs '{CONF_THERMISTOR_RESISTANCE}' "
"set on the npm1300 component",
f"'{CONF_BATTERY_TEMPERATURE}' needs '{CONF_THERMISTOR_RESISTANCE}' set to the "
"nominal resistance of the battery thermistor on the npm1300 component",
path=[CONF_BATTERY_TEMPERATURE],
)
@@ -145,7 +146,7 @@ async def to_code(config: ConfigType) -> None:
if (var := await sensors(CONF_BATTERY_TEMPERATURE, None)) is not None:
hub_config = next(c for c in CORE.config[DOMAIN] if c[CONF_ID] == hub_id)
state = npm1300_ns.ntc_temperature(
_adc(2, 5, 2), 1.0 / hub_config[CONF_THERMISTOR_BETA]
_adc(2, 5, 2), 1.0 / thermistor_beta(hub_config)
)
_add_adc_sensor(hub, var, state, "Battery Temperature")
await sensors(CONF_VBUS_CURRENT_LIMIT, hub.set_vbus_current_limit_sensor)
+12 -4
View File
@@ -15,6 +15,7 @@ from . import (
CONF_THERMISTOR_RESISTANCE,
NPM1300_CHILD_SCHEMA,
OUTPUTS,
THERMISTOR_NONE,
)
DEPENDENCIES = ["npm1300"]
@@ -44,11 +45,18 @@ def _final_validate(config: ConfigType) -> None:
if CONF_CHARGER not in config:
return
hub = fv.get_declaring_config(config[CONF_NPM1300_ID])
# Only the charger block turns off the NTC check, without which the charger never starts
if CONF_CHARGER not in hub and CONF_THERMISTOR_RESISTANCE not in hub:
# A wrong thermistor shifts the battery temperature the charger sees
if CONF_THERMISTOR_RESISTANCE not in hub:
raise cv.Invalid(
f"The '{CONF_CHARGER}' switch needs a '{CONF_CHARGER}' block or "
f"'{CONF_THERMISTOR_RESISTANCE}' on the npm1300 component",
f"The '{CONF_CHARGER}' switch needs '{CONF_THERMISTOR_RESISTANCE}' on the npm1300 "
f"component: the nominal resistance of the battery thermistor, or '{THERMISTOR_NONE}'",
path=[CONF_CHARGER],
)
# Only the charger block turns off the NTC check, without which the charger never starts
if CONF_CHARGER not in hub and hub[CONF_THERMISTOR_RESISTANCE] == THERMISTOR_NONE:
raise cv.Invalid(
f"The '{CONF_CHARGER}' switch needs a '{CONF_CHARGER}' block when "
f"'{CONF_THERMISTOR_RESISTANCE}' is '{THERMISTOR_NONE}'",
path=[CONF_CHARGER],
)
+2 -6
View File
@@ -11,14 +11,12 @@ from esphome.cpp_generator import (
from esphome.types import ConfigType
from . import (
CHARGE_STATUS,
CONF_NPM1300_ID,
DUMP,
DUMP_TAG,
ERROR_REASON,
NPM1300_CHILD_SCHEMA,
STATUS,
STATUS_PUBLISHER,
VBUS_STATUS,
npm1300_ns,
)
@@ -48,9 +46,7 @@ async def to_code(config: ConfigType) -> None:
)
STATUS_PUBLISHER.add(
hub,
npm1300_ns.publish_charger_status(
parent_ref(var), last, VBUS_STATUS, CHARGE_STATUS, ERROR_REASON
),
npm1300_ns.publish_charger_status(parent_ref(var), last, STATUS),
)
DUMP.add(
hub,
+3 -1
View File
@@ -846,7 +846,9 @@ def convert_visual_temperatures(
that needs ``full_config`` is left for final validation, which runs this again with it."""
if (unit := entity_temperature_unit(config, full_config)) is None:
return config
visual = config[CONF_VISUAL]
# A platform entry that only holds nested entities has no visual section of its own
if (visual := config.get(CONF_VISUAL)) is None:
return config
convert_temperature_keys(visual, (CONF_MIN_TEMPERATURE, CONF_MAX_TEMPERATURE), unit)
section = visual if delta_section is None else visual.get(delta_section)
if section is not None:
+37 -9
View File
@@ -4,8 +4,10 @@
#include <array>
#include <cstddef>
#include <cstdint>
#include <limits>
#include <new>
#include <string>
#include <type_traits>
#include "esphome/core/hal.h" // For PROGMEM definition
@@ -76,8 +78,8 @@ template<size_t N> struct FixedString {
///
/// Example:
/// PROGMEM_STRING_TABLE(MyStrings, "foo", "bar", "baz");
/// ProgmemStr str = MyStrings::get_progmem_str(idx, MyStrings::LAST_INDEX); // For ArduinoJson
/// const LogString *log_str = MyStrings::get_log_str(idx, MyStrings::LAST_INDEX); // For logging
/// ProgmemStr str = MyStrings::get_progmem_str(idx); // For ArduinoJson
/// const LogString *log_str = MyStrings::get_log_str(idx); // For logging
///
template<FixedString... Strs> struct ProgmemStringTable {
static constexpr size_t COUNT = sizeof...(Strs);
@@ -122,12 +124,33 @@ inline const char *progmem_skip_strings(const char *blob, uint8_t idx) {
return blob;
}
namespace progmem_detail {
/// Widen an enum or integer to a table index of type D; negative and out-of-range values become huge ones, which
/// fall back. D is a parameter only so the host tests can check the 64-to-32-bit clamp.
template<typename D = size_t, typename T> constexpr D table_index(T value) {
if constexpr (std::is_enum_v<T>) {
return table_index<D>(static_cast<std::underlying_type_t<T>>(value));
} else {
static_assert(std::is_integral_v<T> && !std::is_same_v<T, bool>, "index must be an integer or an enum");
if constexpr (sizeof(T) > sizeof(D)) {
const auto v = static_cast<std::make_unsigned_t<T>>(value);
return v > std::numeric_limits<D>::max() ? std::numeric_limits<D>::max() : static_cast<D>(v);
} else if constexpr (std::is_signed_v<T>) {
return static_cast<D>(static_cast<std::make_signed_t<D>>(value)); // sign-extend first
} else {
return value;
}
}
}
} // namespace progmem_detail
// Forward declaration for LogString (defined in log.h)
struct LogString;
/// Instantiate a ProgmemStringTable with PROGMEM storage.
/// Creates: Name::get_progmem_str(idx, fallback), Name::get_log_str(idx, fallback)
/// If idx >= COUNT, returns string at fallback. Use LAST_INDEX for common patterns.
/// idx and fallback may be any integer or enum; an idx outside the table returns the string at fallback,
/// LAST_INDEX by default.
#define PROGMEM_STRING_TABLE(Name, ...) \
struct Name { \
using Table = ::esphome::ProgmemStringTable<__VA_ARGS__>; \
@@ -137,7 +160,7 @@ struct LogString;
static constexpr size_t MAX_LENGTH = Table::MAX_LENGTH; \
static constexpr auto BLOB ESPHOME_PROGMEM_STRING_TABLE_STORAGE = Table::make_blob(); \
static constexpr auto OFFSETS ESPHOME_PROGMEM_STRING_TABLE_STORAGE = Table::make_offsets(); \
static const char *get_(uint8_t idx, uint8_t fallback) { \
static const char *get_(size_t idx, uint8_t fallback) { \
if (idx >= COUNT) \
idx = fallback; \
/* std::launder is used here to prevent the inter-procedural analysis that */ \
@@ -145,13 +168,18 @@ struct LogString;
if constexpr (Table::INDEXED) \
return std::launder(&BLOB[::esphome::progmem_read_byte(&OFFSETS[idx])]); \
else \
return std::launder(::esphome::progmem_skip_strings(BLOB.data(), idx)); \
return std::launder(::esphome::progmem_skip_strings(BLOB.data(), static_cast<uint8_t>(idx))); \
} \
static ::ProgmemStr get_progmem_str(uint8_t idx, uint8_t fallback) { \
return reinterpret_cast<::ProgmemStr>(get_(idx, fallback)); \
template<typename T, typename F = uint8_t> static ::ProgmemStr get_progmem_str(T idx, F fallback = LAST_INDEX) { \
return reinterpret_cast<::ProgmemStr>( \
get_(::esphome::progmem_detail::table_index(idx), \
static_cast<uint8_t>(::esphome::progmem_detail::table_index(fallback)))); \
} \
static const ::esphome::LogString *get_log_str(uint8_t idx, uint8_t fallback) { \
return reinterpret_cast<const ::esphome::LogString *>(get_(idx, fallback)); \
template<typename T, typename F = uint8_t> \
static const ::esphome::LogString *get_log_str(T idx, F fallback = LAST_INDEX) { \
return reinterpret_cast<const ::esphome::LogString *>( \
get_(::esphome::progmem_detail::table_index(idx), \
static_cast<uint8_t>(::esphome::progmem_detail::table_index(fallback)))); \
} \
}
@@ -222,6 +222,20 @@ def test_a_resolved_unit_waits_for_the_full_config() -> None:
assert config[CONF_VISUAL][CONF_MIN_TEMPERATURE] == pytest.approx(59.0)
def test_final_validate_skips_a_platform_that_only_holds_nested_climates() -> None:
"""A hub platform may put each of its climates under a key of one platform entry."""
nested = climate_schema(climate_ns.class_("NestedClimate", Climate))
platform_schema = cv.Schema({cv.Optional("zone_1"): nested})
config = platform_schema(
{"zone_1": {CONF_NAME: "Zone 1", CONF_VISUAL: {CONF_MIN_TEMPERATURE: "50°F"}}}
)
# The platform entry itself is not a climate and has no visual section
assert CONF_VISUAL not in config
_final_validate([config])
# The nested climate was converted by its own schema
assert config["zone_1"][CONF_VISUAL][CONF_MIN_TEMPERATURE] == pytest.approx(10.0)
@pytest.mark.parametrize(
("use_fahrenheit", "cn105_lines"),
[
+95 -2
View File
@@ -8,11 +8,16 @@ from esphome.components.npm1300 import (
CHARGER_SCHEMA,
NPM1300_UNSET,
OUTPUT_VOLTAGE,
THERMISTOR_NONE,
VBUS_CURRENT_LIMIT,
_charger_config,
_check_thermistor,
_config,
_output_config,
_termination_voltage_code,
_thermistor_resistance,
_vbus_current_limit_code,
thermistor_beta,
)
from esphome.const import CONF_MODE, CONF_VOLTAGE
from esphome.cpp_generator import StructInitializer
@@ -54,10 +59,35 @@ def test_termination_voltage_gap_rejected(voltage: str) -> None:
CHARGER_SCHEMA({"charge_current": "100mA", "termination_voltage": voltage})
def test_warm_termination_defaults_to_termination() -> None:
def test_warm_termination_defaults_to_reset_value() -> None:
fields = _charger({"charge_current": "100mA", "termination_voltage": "4.1V"})
assert fields["termination_voltage"] == "6"
assert fields["warm_termination_voltage"] == "6"
assert fields["warm_termination_voltage"] == "2"
@pytest.mark.parametrize(
("config", "warns"),
[
({"termination_voltage": "4.2V"}, True),
({"termination_voltage": "3.5V"}, False),
({"termination_voltage": "3.6V"}, False),
({}, False),
({"termination_voltage": "4.2V", "warm_termination_voltage": "4.0V"}, False),
],
)
def test_warm_termination_default_warning(
config: ConfigType, warns: bool, caplog: pytest.LogCaptureFixture
) -> None:
CHARGER_SCHEMA(config)
assert ("warm_termination_voltage" in caplog.text) is warns
@pytest.mark.parametrize(("termination", "code"), [("3.5V", "0"), ("3.55V", "1")])
def test_warm_termination_default_not_above_termination(
termination: str, code: str
) -> None:
fields = _charger({"termination_voltage": termination})
assert fields["warm_termination_voltage"] == code
def test_warm_termination_code() -> None:
@@ -112,3 +142,66 @@ def test_vbus_current_limit_code(limit: str, code: int) -> None:
def test_vbus_current_limit_rejected(limit: str) -> None:
with pytest.raises(cv.Invalid):
VBUS_CURRENT_LIMIT(limit)
def test_charger_needs_thermistor() -> None:
with pytest.raises(cv.Invalid, match="thermistor_resistance"):
_check_thermistor({"charger": {}})
config = {"charger": {}, "thermistor_resistance": THERMISTOR_NONE}
assert _check_thermistor(config) is config
@pytest.mark.parametrize("resistance", [None, THERMISTOR_NONE])
def test_thermistor_beta_needs_resistance(resistance: str | None) -> None:
config = {"thermistor_beta": 3380}
if resistance is not None:
config["thermistor_resistance"] = resistance
with pytest.raises(cv.Invalid, match="thermistor_beta"):
_check_thermistor(config)
@pytest.mark.parametrize(
("resistance", "beta"), [(10000.0, 3380), (47000.0, 4050), (100000.0, 4250)]
)
def test_thermistor_beta_default(resistance: float, beta: int) -> None:
assert thermistor_beta({"thermistor_resistance": resistance}) == beta
def test_thermistor_beta_configured() -> None:
config = {"thermistor_resistance": 47000.0, "thermistor_beta": 3950}
assert thermistor_beta(config) == 3950
@pytest.mark.parametrize(
("resistance", "code", "beta"),
[
(None, str(NPM1300_UNSET), "0"),
(THERMISTOR_NONE, "0", "0"),
(100000.0, "3", "4250"),
],
)
def test_config_thermistor(
resistance: str | float | None, code: str, beta: str
) -> None:
config = {} if resistance is None else {"thermistor_resistance": resistance}
fields = _fields(_config(config))
assert fields["thermistor"] == code
assert fields["thermistor_beta"] == beta
@pytest.mark.parametrize(
("value", "result"),
[
("10kOhm", 10000.0),
("0.047MOhm", 47000.0),
("100000", 100000.0),
("None", "none"),
],
)
def test_thermistor_resistance(value: str, result: float | str) -> None:
assert _thermistor_resistance(value) == result
def test_thermistor_resistance_rejected() -> None:
with pytest.raises(cv.Invalid, match="10kOhm, 47kOhm, 100kOhm or none"):
_thermistor_resistance("22kOhm")
@@ -70,4 +70,33 @@ TEST(ProgmemStringTable, StrstrFindsTableEntryInRamString) {
EXPECT_EQ(ESPHOME_strstr_P(line, cool), nullptr);
}
enum class SmallMode : uint8_t { SMALL_MODE_OFF, SMALL_MODE_HEAT, SMALL_MODE_COOL };
enum class WideMode : uint16_t { WIDE_MODE_OFF, WIDE_MODE_HEAT, WIDE_MODE_COOL, WIDE_MODE_BIG = 0x101 };
enum PlainMode { PLAIN_OFF, PLAIN_HEAT };
TEST(ProgmemStringTable, TakesEnumsAndDefaultsToLastEntry) {
EXPECT_STREQ(LOG_STR_ARG(SmallStrings::get_log_str(SmallMode::SMALL_MODE_COOL)), "COOL");
EXPECT_STREQ(LOG_STR_ARG(SmallStrings::get_log_str(PLAIN_HEAT)), "HEAT");
EXPECT_STREQ(LOG_STR_ARG(SmallStrings::get_log_str(static_cast<SmallMode>(9))), "UNKNOWN");
EXPECT_STREQ(LOG_STR_ARG(SmallStrings::get_log_str(static_cast<SmallMode>(9), SmallMode::SMALL_MODE_OFF)), "OFF");
}
TEST(ProgmemStringTable, WideAndNegativeValuesFallBack) {
EXPECT_STREQ(LOG_STR_ARG(SmallStrings::get_log_str(WideMode::WIDE_MODE_HEAT)), "HEAT");
EXPECT_STREQ(LOG_STR_ARG(SmallStrings::get_log_str(WideMode::WIDE_MODE_BIG)), "UNKNOWN");
EXPECT_STREQ(LOG_STR_ARG(SmallStrings::get_log_str(-1)), "UNKNOWN");
EXPECT_STREQ(LOG_STR_ARG(SmallStrings::get_log_str(static_cast<int8_t>(-2))), "UNKNOWN");
EXPECT_STREQ(LOG_STR_ARG(SmallStrings::get_log_str(size_t{2})), "COOL");
EXPECT_STREQ(reinterpret_cast<const char *>(SmallStrings::get_progmem_str(uint32_t{0x10002})), "UNKNOWN");
}
static_assert(progmem_detail::table_index(int8_t{-128}) > UINT8_MAX); // not 128, a valid index in a big table
static_assert(progmem_detail::table_index(int16_t{-1}) > UINT8_MAX);
static_assert(progmem_detail::table_index(int64_t{-1}) > UINT8_MAX);
static_assert(progmem_detail::table_index(uint64_t{1}) == 1);
// A 32-bit index type: 0x1'0000'0001 must clamp, not truncate to the valid index 1
static_assert(progmem_detail::table_index<uint32_t>(uint64_t{0x1'0000'0001}) == UINT32_MAX);
static_assert(progmem_detail::table_index<uint32_t>(int64_t{-1}) == UINT32_MAX);
static_assert(progmem_detail::table_index<uint32_t>(int16_t{-2}) > UINT8_MAX);
} // namespace esphome::core::testing
+6
View File
@@ -0,0 +1,6 @@
from tests.testing_helpers import ComponentManifestOverride
def override_manifest(manifest: ComponentManifestOverride) -> None:
# touchscreen.h includes display.h
manifest.dependencies = manifest.dependencies + ["display"]
+42
View File
@@ -0,0 +1,42 @@
#pragma once
#include <array>
#include <gtest/gtest.h>
#include "esphome/components/cst816/touchscreen/cst816_touchscreen.h"
namespace esphome::cst816::testing {
static constexpr uint8_t ADDRESS = 0x15;
// The driver reads REG_STATUS onwards in one transfer: status, gesture, touch count, then two points.
static constexpr size_t FRAME_SIZE = 13;
/// Serves one fixed status frame.
class FrameBus final : public i2c::I2CBus {
public:
explicit FrameBus(std::array<uint8_t, FRAME_SIZE> frame) : frame_(frame) {}
i2c::ErrorCode write_readv(uint8_t address, const uint8_t *write_buffer, size_t write_count, uint8_t *read_buffer,
size_t read_count) override {
EXPECT_EQ(address, ADDRESS);
for (size_t i = 0; i < read_count; i++)
read_buffer[i] = i < FRAME_SIZE ? this->frame_[i] : 0;
return i2c::ERROR_OK;
}
protected:
std::array<uint8_t, FRAME_SIZE> frame_;
};
inline std::array<uint8_t, FRAME_SIZE> make_frame(uint8_t touch_num, uint16_t x = 0, uint16_t y = 0) {
std::array<uint8_t, FRAME_SIZE> frame{};
frame[REG_TOUCH_NUM] = touch_num;
frame[REG_XPOS_HIGH] = (x >> 8) & 0x0F;
frame[REG_XPOS_LOW] = x & 0xFF;
frame[REG_YPOS_HIGH] = (y >> 8) & 0x0F;
frame[REG_YPOS_LOW] = y & 0xFF;
return frame;
}
} // namespace esphome::cst816::testing
@@ -0,0 +1,88 @@
#include <gtest/gtest.h>
#include <memory>
#include "../common.h"
namespace esphome::cst816::testing {
class CST816TouchscreenTest : public ::testing::Test {
protected:
void feed_(const std::array<uint8_t, FRAME_SIZE> &frame) {
this->bus_ = std::make_unique<FrameBus>(frame);
this->touchscreen_.set_i2c_bus(this->bus_.get());
this->touchscreen_.set_i2c_address(ADDRESS);
this->touchscreen_.update_touches();
}
std::unique_ptr<FrameBus> bus_;
CST816Touchscreen touchscreen_;
};
// An idle frame reports 0xFF in the touch count byte and 0xFFF coordinates. Masking 0xFF to the
// low two bits turns that into three touches at the maximum position, a phantom tap.
TEST_F(CST816TouchscreenTest, IdleAllOnesFrameIsIgnored) {
this->feed_(make_frame(0xFF, 0x0FFF, 0x0FFF));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
TEST_F(CST816TouchscreenTest, ZeroTouchCountIsIgnored) {
this->feed_(make_frame(0));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// Three is the boundary the guard rejects: the old mask turned a count of three into three
// touches, so this is the value whose behaviour changes.
TEST_F(CST816TouchscreenTest, TouchCountThreeIsIgnored) {
this->feed_(make_frame(3, 100, 200));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// The count is the whole low nibble, so 0x05 must not be masked down to one touch by a 0x03 mask.
TEST_F(CST816TouchscreenTest, TouchCountFiveIsIgnored) {
this->feed_(make_frame(0x05, 100, 200));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
TEST_F(CST816TouchscreenTest, SingleTouchIsReported) {
this->feed_(make_frame(1, 300, 100));
auto touches = this->touchscreen_.get_touches();
ASSERT_EQ(touches.size(), 1u);
EXPECT_EQ(touches[0].x_raw, 300);
EXPECT_EQ(touches[0].y_raw, 100);
}
// CST826/CST836 can report two points; the driver only consumes the first one.
TEST_F(CST816TouchscreenTest, TwoPointFrameReportsFirstPoint) {
this->feed_(make_frame(2, 300, 100));
auto touches = this->touchscreen_.get_touches();
ASSERT_EQ(touches.size(), 1u);
EXPECT_EQ(touches[0].x_raw, 300);
EXPECT_EQ(touches[0].y_raw, 100);
}
TEST_F(CST816TouchscreenTest, SentinelPositionIsIgnored) {
this->feed_(make_frame(1, 0x0FFF, 100));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// The sentinel is checked on both axes; a valid X with Y=0xFFF is still an idle reading.
TEST_F(CST816TouchscreenTest, SentinelYPositionIsIgnored) {
this->feed_(make_frame(1, 100, 0x0FFF));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// x_raw_max_/y_raw_max_ are calibration endpoints, not validity limits: the base class applies them
// after swapping axes and clamps readings outside them. A touch beyond the calibrated maximum is
// still a real touch and must reach the base class.
TEST_F(CST816TouchscreenTest, CalibrationBoundsDoNotDropTouches) {
this->touchscreen_.set_calibration(0, 240, 0, 320);
this->touchscreen_.set_swap_xy(true);
this->feed_(make_frame(1, 300, 100));
auto touches = this->touchscreen_.get_touches();
ASSERT_EQ(touches.size(), 1u);
EXPECT_EQ(touches[0].x_raw, 100);
EXPECT_EQ(touches[0].y_raw, 300);
}
} // namespace esphome::cst816::testing
+38 -22
View File
@@ -1,29 +1,38 @@
npm1300:
id: pmic
i2c_id: i2c_bus
vbus_current_limit: 500mA
thermistor_resistance: 10kOhm
thermistor_beta: 3380
charger:
charge_current: 150mA
termination_voltage: 4.2V
warm_termination_voltage: 4.0V
termination_current: 20%
trickle_voltage: 2.5V
discharge_current_limit: 1000mA
recharge: true
buck2:
voltage: 3.3V
ldo1:
voltage: 3.3V
mode: ldo
enabled: true
ldo2:
mode: load_switch
enabled: false
- id: pmic
i2c_id: i2c_bus
vbus_current_limit: 500mA
thermistor_resistance: 10kOhm
thermistor_beta: 3380
charger:
charge_current: 150mA
termination_voltage: 4.2V
warm_termination_voltage: 4.0V
termination_current: 20%
trickle_voltage: 2.5V
discharge_current_limit: 1000mA
recharge: true
buck2:
voltage: 3.3V
ldo1:
voltage: 3.3V
mode: ldo
enabled: true
ldo2:
mode: load_switch
enabled: false
# A battery without a thermistor
- id: pmic_no_ntc
i2c_id: i2c_bus
address: 0x6C
thermistor_resistance: none
charger:
termination_voltage: 3.5V
enabled: true
sensor:
- platform: npm1300
npm1300_id: pmic
battery_voltage:
name: Battery Voltage
battery_current:
@@ -41,6 +50,7 @@ sensor:
binary_sensor:
- platform: npm1300
npm1300_id: pmic
vbus_present:
name: VBUS Present
vbus_current_limit_active:
@@ -54,11 +64,13 @@ binary_sensor:
text_sensor:
- platform: npm1300
npm1300_id: pmic
charger_status:
name: Charger Status
switch:
- platform: npm1300
npm1300_id: pmic
charger:
name: Charger
buck1:
@@ -67,6 +79,10 @@ switch:
name: LDO1
ldo2:
name: LDO2
- platform: npm1300
npm1300_id: pmic_no_ntc
charger:
name: Charger Without Thermistor
button:
- platform: template
@@ -1550,6 +1550,15 @@ def test_convert_visual_temperatures(
convert_visual_temperatures({"visual": {}}, delta_keys, delta_section)
def test_convert_visual_temperatures_without_a_visual_section() -> None:
"""A platform entry that only holds nested entities has no visual section and is left alone."""
nested = {"visual": {"min_temperature": (50.0, "°F")}}
config = {"zone_1": nested}
assert convert_visual_temperatures(config, ("step",)) is config
assert nested["visual"]["min_temperature"] == (50.0, "°F")
@pytest.mark.asyncio
async def test_setup_entity_integrations_registers_mqtt_and_web_server(
monkeypatch: pytest.MonkeyPatch, setup_test_environment: list[str]
+7 -1
View File
@@ -1792,7 +1792,13 @@ def test_ccache_env_opt_in_without_binary(
# Explicit IDF_CCACHE_ENABLE=1 forces it on; without a usable binary
# IDF's CMake silently skips ccache, so this branch must say so out loud.
p1, p2, p3 = _ccache_patches(tmp_path, None, tmp_path / "build")
with patch.dict("os.environ", {"IDF_CCACHE_ENABLE": "1"}, clear=True), p1, p2, p3:
with (
patch.dict("os.environ", {"IDF_CCACHE_ENABLE": "1"}, clear=True),
patch("esphome.espidf.framework.shutil.which", return_value=None),
p1,
p2,
p3,
):
env = _ccache_env()
assert env["IDF_CCACHE_ENABLE"] == "1"
assert env["CCACHE_DIR"] == str(tmp_path / "tools" / "ccache")