Compare commits

...
Author SHA1 Message Date
J. Nick Koston 5a67b9f65e Look up the single-caller log names directly 2026-11-17 15:13:08 -06:00
J. Nick Koston 2860272f82 Include progmem.h directly in sy6970.cpp 2026-11-17 15:00:03 -06:00
J. Nick Koston ba08a443b8 [ds3231][es9038q2m_katana][lis2dw12][npm1300][sy6970][tmc22xx] Look up log names in PROGMEM string tables 2026-11-17 14:47:55 -06:00
Mattheinrichs 84dea8078b [cst816] Ignore idle 0xFF touch frames and invalid coordinates (#22435) 2026-11-17 08:58:24 -06:00
Jacopo Labardi dbf6af2fd7 [logger] Qualify the host clock function (#22838) 2026-11-17 08:50:19 -06:00
David Woodhouse bc6fb7082f [climate] Don't fail on a platform entry that only holds nested climates (#22844) 2026-11-17 08:49:00 -06:00
tomaszduda23andClaude cfa27cea58 [npm1300] Fix the thermistor resistance error message (#22835)
Co-authored-by: Claude <noreply@anthropic.com>
2026-11-17 17:40:04 +03:00
rwrozelleandClaude Opus 5.5 5c061f9e1e [espidf] Hide the ccache binary in the forced-on, no-binary test (#22842)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 09:29:34 -05:00
Jesse Hills 34b24d0cf5 Merge branch 'beta' into dev 2026-11-17 22:25:16 +13:00
Jesse Hills e27614fda3 Merge pull request #22833 from esphome/bump-2026.11.0b6
2026.11.0b6
2026-11-17 22:24:55 +13:00
J. Nick Koston 8426d04138 [api] Make the event order backpressure test wait until the pipe is full (#22112) 2026-11-17 21:09:01 +13:00
641c8bedc9 [npm1300] Use datasheet defaults, require the thermistor setting for charging, fix charger status (#22769)
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: J. Nick Koston <nick@home-assistant.io>
2026-11-17 09:00:10 +01:00
Jesse Hills 4a39ca1b71 Fix 2026-11-17 20:54:40 +13:00
Jesse Hills 4a218fdbd8 Remove extra test 2026-11-17 20:47:40 +13:00
Jesse Hills d8fc1cd214 Bump version to 2026.11.0b6 2026-11-17 18:54:23 +13:00
J. Nick Koston 1e030b7371 [modem] Set the APN while the SIM is powered down (#22817) 2026-11-17 18:54:20 +13:00
J. Nick Koston 3b113f2c39 [wifi] Join the next network after a failed hidden network probe on ESP32 (#22764) 2026-11-17 18:54:20 +13:00
J. Nick Koston 73468592a9 [remote_base] Fix the Haier and Mirage remote_receiver binary sensors failing to compile 2026-11-17 18:54:06 +13:00
Jonathan Swoboda a1b456150d [esp32][libretiny] Make delay() wait at least the requested time (#22822) 2026-11-17 18:53:11 +13:00
J. Nick Koston 865a883abb [remote_base] Fix the canalsatld binary sensor and trigger build 2026-11-17 18:53:11 +13:00
J. Nick Koston 357a6717c8 [core] Release only the lwIP core lock a LwIPLock took (#22683) 2026-11-17 18:53:11 +13:00
J. Nick Koston bcb434e05e [esp32_ble] Stop Bluedroid re-running a failed queued MTU or execute write request (#22670) 2026-11-17 18:53:11 +13:00
J. Nick Koston fb65fcc5f6 [esp32_power_management] Clamp the tick step after light sleep so it cannot trip vTaskStepTick (#22637) 2026-11-17 18:53:11 +13:00
J. Nick Koston b5e379a9d4 [uart] Stop ESP8266 software serial TX from tripping the Wi-Fi watchdog at 57600 baud (#22641) 2026-11-17 18:53:11 +13:00
J. Nick Kostonandpre-commit-ci-lite[bot] 05286dfd5d [api] Send queued entity states before DisconnectRequest on shutdown (#22625)
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
2026-11-17 18:53:11 +13:00
J. Nick Koston 36184f09aa [zephyr] Count micros() in microseconds and busy-wait in delayMicroseconds() (#22612) 2026-11-17 18:53:11 +13:00
Adam Matthews 449933891e [wifi] Clear the error flag when the adapter restart is skipped (#22797) 2026-11-17 18:53:11 +13:00
Jonathan Swoboda a5bfa6dac3 [esp32_ble] Apply the Bluedroid workarounds to the ESP-IDF 6.1 releases that need them (#22806) 2026-11-17 18:53:11 +13:00
Jonathan Swoboda 5aaa5b0552 [esp32_ble] Replace Bluedroid's sscanf callers on ESP-IDF 6 too (#22805) 2026-11-17 18:53:11 +13:00
J. Nick Koston 9ab090a818 [i2c] Refuse RP2040 writes larger than the Wire buffer instead of leaving the bus stuck (#22791) 2026-11-17 18:53:10 +13:00
J. Nick Koston 02d0bb56a6 [cc1101] Refuse begin_tx in packet mode (#22636) 2026-11-16 22:21:59 -06:00
23 changed files with 581 additions and 314 deletions

No files matched your search

+4 -10
View File
@@ -515,18 +515,12 @@ void CC1101Component::dump_config() {
}
void CC1101Component::begin_tx() {
this->wake_up();
// Read the mode before the PKTCTRL0 write below overwrites it in state_
const bool packet_mode = this->state_.PKT_FORMAT == static_cast<uint8_t>(PacketFormat::PACKET_FORMAT_FIFO);
// Ensure Packet Format is 3 (Async Serial)
this->write_(Register::PKTCTRL0, 0x32);
if (this->state_.PKT_FORMAT == static_cast<uint8_t>(PacketFormat::PACKET_FORMAT_FIFO)) {
ESP_LOGW(TAG, "begin_tx is for async serial mode; use send_packet in packet mode");
return;
}
ESP_LOGV(TAG, "Beginning TX sequence");
if (this->gdo0_pin_ != nullptr) {
// setup() only attaches the interrupt in packet mode. In async serial mode the pin may be
// shared with remote_receiver, and detaching here would remove the receiver's interrupt.
if (packet_mode) {
this->gdo0_pin_->detach_interrupt();
}
this->gdo0_pin_->pin_mode(gpio::FLAG_OUTPUT);
}
// Transition through IDLE to bypass CCA (Clear Channel Assessment) which can
@@ -63,13 +63,25 @@ void CST816Touchscreen::update_touches() {
uint8_t data[13];
if (!this->status_comm_result(this->read_bytes(REG_STATUS, data, sizeof data)))
return;
uint8_t num_of_touches = data[REG_TOUCH_NUM] & 3;
// The low nibble is the touch count. CST816/CST820 are single-touch;
// CST826/CST836 can report two points, but this driver only reads the first
// point. Some CST8xx controllers report an all-0xFF frame when idle or after
// disabling auto-sleep: the count lands above two and the coordinates are
// the 0xFFF sentinel, so both guards below reject it.
uint8_t num_of_touches = low_nibble(data[REG_TOUCH_NUM]);
if (num_of_touches == 0) {
return;
}
if (num_of_touches > 2) {
return;
}
uint16_t x = encode_uint16(low_nibble(data[REG_XPOS_HIGH]), data[REG_XPOS_LOW]);
uint16_t y = encode_uint16(low_nibble(data[REG_YPOS_HIGH]), data[REG_YPOS_LOW]);
if (x == 0x0FFF || y == 0x0FFF) {
return;
}
ESP_LOGV(TAG, "Read touch %d/%d", x, y);
this->add_raw_touch_position_(0, x, y);
}
+6 -13
View File
@@ -1,6 +1,7 @@
#include "ds3231.h"
#include "esphome/core/helpers.h"
#include "esphome/core/log.h"
#include "esphome/core/progmem.h"
// Datasheet:
// - https://www.analog.com/media/en/technical-documentation/data-sheets/DS3231.pdf
@@ -27,19 +28,11 @@ static const LogString *alarm_state_to_string(uint8_t control, uint8_t alarm) {
return (control & (alarm == 1 ? 0x01 : 0x02)) != 0 ? LOG_STR("enabled") : LOG_STR("disabled");
}
static const LogString *square_wave_to_string(SquareWaveFrequency frequency) {
switch (frequency) {
case SQUARE_WAVE_1HZ:
return LOG_STR("1 Hz");
case SQUARE_WAVE_1024HZ:
return LOG_STR("1.024 kHz");
case SQUARE_WAVE_4096HZ:
return LOG_STR("4.096 kHz");
case SQUARE_WAVE_8192HZ:
return LOG_STR("8.192 kHz");
default:
return LOG_STR("unknown");
}
// Indexed by SquareWaveFrequency
PROGMEM_STRING_TABLE(SquareWaveStrings, "1 Hz", "1.024 kHz", "4.096 kHz", "8.192 kHz", "unknown");
static __attribute__((noinline)) const LogString *square_wave_to_string(SquareWaveFrequency frequency) {
return SquareWaveStrings::get_log_str(static_cast<uint8_t>(frequency), SquareWaveStrings::LAST_INDEX);
}
void IRAM_ATTR DS3231Component::interrupt_handler(DS3231Component *arg) { arg->enable_loop_soon_any_context(); }
@@ -2,6 +2,7 @@
#include "esphome/core/hal.h"
#include "esphome/core/log.h"
#include "esphome/core/progmem.h"
#include <cmath>
@@ -34,37 +35,12 @@ constexpr uint8_t KATANA_VOLUME_FULL_ATTENUATION = 255;
// The control logic ignores writes for this long after a reset.
constexpr uint32_t RESET_SETTLE_DELAY_MS = 10;
const LogString *filter_shape_to_str(FilterShape shape) {
switch (shape) {
case FILTER_SHAPE_LINEAR_PHASE_FAST:
return LOG_STR("linear_phase_fast");
case FILTER_SHAPE_LINEAR_PHASE_SLOW:
return LOG_STR("linear_phase_slow");
case FILTER_SHAPE_MIN_PHASE_FAST:
return LOG_STR("minimum_phase_fast");
case FILTER_SHAPE_MIN_PHASE_SLOW:
return LOG_STR("minimum_phase_slow");
case FILTER_SHAPE_APODIZING:
return LOG_STR("apodizing");
case FILTER_SHAPE_HYBRID:
return LOG_STR("hybrid");
default:
return LOG_STR("brick_wall");
}
}
// Indexed by FilterShape
PROGMEM_STRING_TABLE(FilterShapeStrings, "linear_phase_fast", "linear_phase_slow", "minimum_phase_fast",
"minimum_phase_slow", "apodizing", "brick_wall", "hybrid", "brick_wall");
const LogString *deemphasis_to_str(DeemphasisMode mode) {
switch (mode) {
case DEEMPHASIS_32KHZ:
return LOG_STR("32khz");
case DEEMPHASIS_44_1KHZ:
return LOG_STR("44_1khz");
case DEEMPHASIS_48KHZ:
return LOG_STR("48khz");
default:
return LOG_STR("bypass");
}
}
// Indexed by DeemphasisMode
PROGMEM_STRING_TABLE(DeemphasisStrings, "bypass", "32khz", "44_1khz", "48khz");
} // namespace
@@ -93,8 +69,10 @@ void ES9038Q2MKatana::dump_config() {
" De-emphasis: %s\n"
" Format register: 0x%02X\n"
" DoP: %s",
LOG_STR_ARG(filter_shape_to_str(this->filter_shape_)),
LOG_STR_ARG(deemphasis_to_str(this->deemphasis_mode_)), this->format_, ONOFF(this->dop_enabled_));
LOG_STR_ARG(FilterShapeStrings::get_log_str(static_cast<uint8_t>(this->filter_shape_),
FilterShapeStrings::LAST_INDEX)),
LOG_STR_ARG(DeemphasisStrings::get_log_str(this->deemphasis_mode_, DEEMPHASIS_BYPASS)), this->format_,
ONOFF(this->dop_enabled_));
LOG_I2C_DEVICE(this);
if (this->is_failed())
return;
+27 -77
View File
@@ -2,6 +2,7 @@
#include "esphome/core/application.h"
#include "esphome/core/hal.h"
#include "esphome/core/log.h"
#include "esphome/core/progmem.h"
namespace esphome::lis2dw12 {
@@ -13,73 +14,19 @@ static constexpr uint32_t EVENT_COOLDOWN_MS = 500;
static constexpr uint32_t POLL_INTERVAL_MS = 50;
static constexpr uint8_t SIXD_POSITION_MASK = 0x3F; // XL..ZH, leaving out D6D_IA
static const LogString *power_mode_to_string(PowerMode mode) {
switch (mode) {
case PowerMode::HIGH_PERF:
return LOG_STR("High Performance");
case PowerMode::LOW_POWER_1:
return LOG_STR("Low Power 1 (12-bit)");
case PowerMode::LOW_POWER_2:
return LOG_STR("Low Power 2");
case PowerMode::LOW_POWER_3:
return LOG_STR("Low Power 3");
case PowerMode::LOW_POWER_4:
return LOG_STR("Low Power 4");
}
return LOG_STR("Unknown");
}
// Indexed by PowerMode
PROGMEM_STRING_TABLE(PowerModeStrings, "High Performance", "Low Power 1 (12-bit)", "Low Power 2", "Low Power 3",
"Low Power 4", "Unknown");
static const LogString *range_to_string(Range range) {
switch (range) {
case Range::RANGE_2G:
return LOG_STR("±2g");
case Range::RANGE_4G:
return LOG_STR("±4g");
case Range::RANGE_8G:
return LOG_STR("±8g");
case Range::RANGE_16G:
return LOG_STR("±16g");
}
return LOG_STR("Unknown");
}
// Indexed by Range
PROGMEM_STRING_TABLE(RangeStrings, "±2g", "±4g", "±8g", "±16g", "Unknown");
static const LogString *data_rate_to_string(DataRate rate) {
switch (rate) {
case DataRate::RATE_1_6HZ:
return LOG_STR("1.6 Hz");
case DataRate::RATE_12_5HZ:
return LOG_STR("12.5 Hz");
case DataRate::RATE_25HZ:
return LOG_STR("25 Hz");
case DataRate::RATE_50HZ:
return LOG_STR("50 Hz");
case DataRate::RATE_100HZ:
return LOG_STR("100 Hz");
case DataRate::RATE_200HZ:
return LOG_STR("200 Hz");
case DataRate::RATE_400HZ:
return LOG_STR("400 Hz");
case DataRate::RATE_800HZ:
return LOG_STR("800 Hz");
case DataRate::RATE_1600HZ:
return LOG_STR("1600 Hz");
}
return LOG_STR("Unknown");
}
// Indexed by DataRate
PROGMEM_STRING_TABLE(DataRateStrings, "Unknown", "1.6 Hz", "12.5 Hz", "25 Hz", "50 Hz", "100 Hz", "200 Hz", "400 Hz",
"800 Hz", "1600 Hz");
static const LogString *filter_bandwidth_to_string(FilterBandwidth bw) {
switch (bw) {
case FilterBandwidth::BW_ODR_DIV_2:
return LOG_STR("ODR/2");
case FilterBandwidth::BW_ODR_DIV_4:
return LOG_STR("ODR/4");
case FilterBandwidth::BW_ODR_DIV_10:
return LOG_STR("ODR/10");
case FilterBandwidth::BW_ODR_DIV_20:
return LOG_STR("ODR/20");
}
return LOG_STR("Unknown");
}
// Indexed by FilterBandwidth
PROGMEM_STRING_TABLE(FilterBandwidthStrings, "ODR/2", "ODR/4", "ODR/10", "ODR/20", "Unknown");
void LIS2DW12Component::setup() {
uint8_t who_am_i{0};
@@ -169,19 +116,22 @@ bool LIS2DW12Component::configure_registers_() {
void LIS2DW12Component::dump_config() {
ESP_LOGCONFIG(TAG, "LIS2DW12:");
ESP_LOGCONFIG(TAG,
" Power Mode: %s\n"
" Data Rate: %s\n"
" Range: %s\n"
" Filter Bandwidth: %s\n"
" Low Noise: %s\n"
" Offsets: {%.3f m/s², %.3f m/s², %.3f m/s²}\n"
" Transform: {mirror_x=%s, mirror_y=%s, mirror_z=%s, swap_xy=%s}",
LOG_STR_ARG(power_mode_to_string(this->power_mode_)),
LOG_STR_ARG(data_rate_to_string(this->data_rate_)), LOG_STR_ARG(range_to_string(this->range_)),
LOG_STR_ARG(filter_bandwidth_to_string(this->filter_bandwidth_)), YESNO(this->low_noise_),
this->offset_x_, this->offset_y_, this->offset_z_, YESNO(this->mirror_x_), YESNO(this->mirror_y_),
YESNO(this->mirror_z_), YESNO(this->swap_xy_));
ESP_LOGCONFIG(
TAG,
" Power Mode: %s\n"
" Data Rate: %s\n"
" Range: %s\n"
" Filter Bandwidth: %s\n"
" Low Noise: %s\n"
" Offsets: {%.3f m/s², %.3f m/s², %.3f m/s²}\n"
" Transform: {mirror_x=%s, mirror_y=%s, mirror_z=%s, swap_xy=%s}",
LOG_STR_ARG(PowerModeStrings::get_log_str(static_cast<uint8_t>(this->power_mode_), PowerModeStrings::LAST_INDEX)),
LOG_STR_ARG(DataRateStrings::get_log_str(static_cast<uint8_t>(this->data_rate_), 0)),
LOG_STR_ARG(RangeStrings::get_log_str(static_cast<uint8_t>(this->range_), RangeStrings::LAST_INDEX)),
LOG_STR_ARG(FilterBandwidthStrings::get_log_str(static_cast<uint8_t>(this->filter_bandwidth_),
FilterBandwidthStrings::LAST_INDEX)),
YESNO(this->low_noise_), this->offset_x_, this->offset_y_, this->offset_z_, YESNO(this->mirror_x_),
YESNO(this->mirror_y_), YESNO(this->mirror_z_), YESNO(this->swap_xy_));
LOG_UPDATE_INTERVAL(this);
#ifdef USE_BINARY_SENSOR
+1 -1
View File
@@ -9,7 +9,7 @@ void HOT Logger::write_msg_(const char *msg, uint16_t len) {
char buffer[TIMESTAMP_LEN + ESPHOME_LOGGER_TX_BUFFER_SIZE + HEADROOM];
time_t rawtime;
time(&rawtime);
::time(&rawtime);
struct tm timeinfo;
localtime_r(&rawtime, &timeinfo); // Thread-safe version
size_t pos = strftime(buffer, TIMESTAMP_LEN + 1, "[%H:%M:%S]", &timeinfo);
+117 -39
View File
@@ -1,4 +1,5 @@
from collections.abc import Callable
import logging
from esphome import automation
import esphome.codegen as cg
@@ -8,6 +9,8 @@ import esphome.config_validation as cv
from esphome.const import CONF_DURATION, CONF_ID, CONF_MODE, CONF_VOLTAGE
from esphome.types import ConfigType
_LOGGER = logging.getLogger(__name__)
CODEOWNERS = ["@tomaszduda23"]
DEPENDENCIES = ["i2c"]
DOMAIN = "npm1300"
@@ -42,20 +45,18 @@ NPM1300_CHILD_SCHEMA = cv.Schema(
{cv.GenerateID(CONF_NPM1300_ID): cv.use_id(NPM1300Component)}
)
# Status registers read on each update: VBUSINSTATUS, BCHGCHARGESTATUS and BCHGERRREASON
NPM1300Status = npm1300_ns.struct("NPM1300Status")
# The status registers read on each update
STATUS_PUBLISHER = cg.HubFunction(
"status",
cg.void,
[
(cg.uint8, "vbus_status"),
(cg.uint8, "charge_status"),
(cg.uint8, "error_reason"),
],
[(NPM1300Status.operator("const").operator("ref"), "status")],
define="USE_NPM1300_STATUS_PUBLISHER",
)
VBUS_STATUS = STATUS_PUBLISHER.param("vbus_status")
CHARGE_STATUS = STATUS_PUBLISHER.param("charge_status")
ERROR_REASON = STATUS_PUBLISHER.param("error_reason")
STATUS = STATUS_PUBLISHER.param("status")
VBUS_STATUS = STATUS.vbus
CHARGE_STATUS = STATUS.charge
ERROR_REASON = STATUS.error_reason
# The ADC results and the amperes per code of the battery current
DATA_PUBLISHER = cg.HubFunction(
"data",
@@ -77,7 +78,10 @@ OUTPUTS = NPM1300Output.options(
# Written for a field the YAML leaves out
NPM1300_UNSET = 0xFF
# ADCNTCRSEL codes, by kiloohms
THERMISTOR_NONE = "none"
THERMISTOR_RESISTANCES = {10: 1, 47: 2, 100: 3}
# B25/50 of the thermistors the product specification lists for each resistance, by kiloohms
THERMISTOR_BETAS = {10: 3380, 47: 4050, 100: 4250}
LDO_MODES = {"load_switch": 0, "ldo": 1}
TERMINATION_CURRENTS = {"10%": 0, "20%": 1}
# BCHGVTRICKLESEL, by millivolts
@@ -101,14 +105,13 @@ def _one_of_units(
validator: Callable[[object], float],
allowed: list[int],
unit: str,
scale: float = 1000,
) -> Callable[[object], float]:
"""Validate a quantity with `validator` and accept only the listed values, given in units * `scale`."""
"""Validate a quantity with `validator` and accept only the listed values, given in thousandths of `unit`."""
def validate(value: object) -> float:
value = validator(value)
if round(value * scale) not in allowed:
options = ", ".join(f"{v / scale:g}{unit}" for v in allowed)
if _millis(value) not in allowed:
options = ", ".join(f"{v / 1000:g}{unit}" for v in allowed)
raise cv.Invalid(f"Must be one of {options}")
return value
@@ -135,6 +138,23 @@ def _stepped(
return validate
def _thermistor_resistance(value: object) -> float | str:
if isinstance(value, str) and value.lower() == THERMISTOR_NONE:
return THERMISTOR_NONE
value = cv.resistance(value)
if round(value) not in (kilohms * 1000 for kilohms in THERMISTOR_RESISTANCES):
options = ", ".join(f"{kilohms}kOhm" for kilohms in THERMISTOR_RESISTANCES)
raise cv.Invalid(f"Must be one of {options} or {THERMISTOR_NONE}")
return value
def thermistor_beta(config: ConfigType) -> int:
"""The B constant of the hub's thermistor: the configured one, or the one listed for its resistance."""
if (beta := config.get(CONF_THERMISTOR_BETA)) is not None:
return beta
return THERMISTOR_BETAS[round(config[CONF_THERMISTOR_RESISTANCE] / 1000)]
OUTPUT_VOLTAGE = _stepped(cv.voltage, 1000, 3300, 100, "V")
VBUS_CURRENT_LIMIT = _stepped(cv.current, 100, 1500, 100, "A")
@@ -150,15 +170,58 @@ LDO_SCHEMA = BUCK_SCHEMA.extend(
}
)
CHARGER_SCHEMA = cv.Schema(
WARM_TERMINATION_VOLTAGE_DEFAULT = 3.6
def _warm_termination_default(config: ConfigType) -> ConfigType:
"""Keep the default warm termination voltage at or below the termination voltage.
Warn when the default stays below a higher termination voltage.
"""
if (
not isinstance(config, dict)
or CONF_WARM_TERMINATION_VOLTAGE in config
or CONF_TERMINATION_VOLTAGE not in config
):
return config
try:
termination = cv.voltage(config[CONF_TERMINATION_VOLTAGE])
except cv.Invalid:
# The schema reports it
return config
if termination < WARM_TERMINATION_VOLTAGE_DEFAULT - 0.001:
# A warm battery is never charged higher than a cool one
return {
**config,
CONF_WARM_TERMINATION_VOLTAGE: config[CONF_TERMINATION_VOLTAGE],
}
if termination > WARM_TERMINATION_VOLTAGE_DEFAULT + 0.001:
_LOGGER.warning(
"npm1300 '%s' is not set, so a warm battery (45 °C to 60 °C by default) stops "
"charging at %.2fV instead of the %.2fV of '%s'. Set '%s' to the value your "
"battery allows when warm",
CONF_WARM_TERMINATION_VOLTAGE,
WARM_TERMINATION_VOLTAGE_DEFAULT,
termination,
CONF_TERMINATION_VOLTAGE,
CONF_WARM_TERMINATION_VOLTAGE,
)
return config
_CHARGER_SETTINGS_SCHEMA = cv.Schema(
{
cv.Required(CONF_CHARGE_CURRENT): _stepped(cv.current, 32, 800, 2, "A"),
cv.Optional(CONF_TERMINATION_VOLTAGE, default="4.2V"): _one_of_units(
cv.voltage, TERMINATION_VOLTAGES, "V"
# Defaults are the reset values of the product specification
cv.Optional(CONF_CHARGE_CURRENT, default="32mA"): _stepped(
cv.current, 32, 800, 2, "A"
),
cv.Optional(CONF_WARM_TERMINATION_VOLTAGE): _one_of_units(
cv.Optional(CONF_TERMINATION_VOLTAGE, default="3.6V"): _one_of_units(
cv.voltage, TERMINATION_VOLTAGES, "V"
),
cv.Optional(
CONF_WARM_TERMINATION_VOLTAGE,
default=f"{WARM_TERMINATION_VOLTAGE_DEFAULT}V",
): _one_of_units(cv.voltage, TERMINATION_VOLTAGES, "V"),
cv.Optional(CONF_TERMINATION_CURRENT, default="10%"): cv.enum(
TERMINATION_CURRENTS
),
@@ -169,22 +232,37 @@ CHARGER_SCHEMA = cv.Schema(
cv.current, list(DISCHARGE_CURRENT_LIMITS), "A"
),
cv.Optional(CONF_RECHARGE, default=True): cv.boolean,
cv.Optional(CONF_ENABLED, default=True): cv.boolean,
cv.Optional(CONF_ENABLED, default=False): cv.boolean,
}
)
CHARGER_SCHEMA = cv.All(_warm_termination_default, _CHARGER_SETTINGS_SCHEMA)
CONFIG_SCHEMA = (
def _check_thermistor(config: ConfigType) -> ConfigType:
"""A wrong thermistor shifts the battery temperature the charger sees, so charging needs one chosen."""
resistance = config.get(CONF_THERMISTOR_RESISTANCE)
if CONF_CHARGER in config and resistance is None:
raise cv.Invalid(
f"'{CONF_THERMISTOR_RESISTANCE}' is required with '{CONF_CHARGER}': set the nominal "
f"resistance of the battery thermistor, or '{THERMISTOR_NONE}'",
path=[CONF_THERMISTOR_RESISTANCE],
)
if CONF_THERMISTOR_BETA in config and resistance in (None, THERMISTOR_NONE):
raise cv.Invalid(
f"'{CONF_THERMISTOR_BETA}' needs '{CONF_THERMISTOR_RESISTANCE}' set to the "
"resistance of the thermistor",
path=[CONF_THERMISTOR_BETA],
)
return config
CONFIG_SCHEMA = cv.All(
cv.Schema(
{
cv.GenerateID(): cv.declare_id(NPM1300Component),
cv.Optional(CONF_VBUS_CURRENT_LIMIT): VBUS_CURRENT_LIMIT,
cv.Optional(CONF_THERMISTOR_RESISTANCE): _one_of_units(
cv.resistance, list(THERMISTOR_RESISTANCES), "kOhm", scale=0.001
),
cv.Optional(CONF_THERMISTOR_BETA, default=3380): cv.int_range(
min=1, max=65535
),
cv.Optional(CONF_THERMISTOR_RESISTANCE): _thermistor_resistance,
cv.Optional(CONF_THERMISTOR_BETA): cv.int_range(min=1, max=65535),
cv.Optional(CONF_CHARGER): CHARGER_SCHEMA,
cv.Optional(CONF_BUCK1): BUCK_SCHEMA,
cv.Optional(CONF_BUCK2): BUCK_SCHEMA,
@@ -193,7 +271,8 @@ CONFIG_SCHEMA = (
}
)
.extend(cv.polling_component_schema("60s"))
.extend(i2c.i2c_device_schema(0x6B))
.extend(i2c.i2c_device_schema(0x6B)),
_check_thermistor,
)
@@ -208,7 +287,7 @@ def _vbus_current_limit_code(amps: float) -> int:
def _charger_config(config: ConfigType) -> cg.StructInitializer:
termination = _termination_voltage_code(config[CONF_TERMINATION_VOLTAGE])
warm = config.get(CONF_WARM_TERMINATION_VOLTAGE)
warm = _termination_voltage_code(config[CONF_WARM_TERMINATION_VOLTAGE])
return cg.StructInitializer(
NPM1300ChargerConfig,
("current", _millis(config[CONF_CHARGE_CURRENT]) // 2),
@@ -217,10 +296,7 @@ def _charger_config(config: ConfigType) -> cg.StructInitializer:
DISCHARGE_CURRENT_LIMITS[_millis(config[CONF_DISCHARGE_CURRENT_LIMIT])],
),
("termination_voltage", termination),
(
"warm_termination_voltage",
termination if warm is None else _termination_voltage_code(warm),
),
("warm_termination_voltage", warm),
("trickle_voltage", TRICKLE_VOLTAGES[_millis(config[CONF_TRICKLE_VOLTAGE])]),
("termination_current", TERMINATION_CURRENTS[config[CONF_TERMINATION_CURRENT]]),
("recharge", config[CONF_RECHARGE]),
@@ -247,6 +323,13 @@ def _output_config(config: ConfigType | None) -> cg.StructInitializer:
def _config(config: ConfigType) -> cg.StructInitializer:
charger = config.get(CONF_CHARGER)
resistance = config.get(CONF_THERMISTOR_RESISTANCE)
if resistance is None:
thermistor, beta = NPM1300_UNSET, 0
elif resistance == THERMISTOR_NONE:
thermistor, beta = 0, 0
else:
thermistor = THERMISTOR_RESISTANCES[round(resistance / 1000)]
beta = thermistor_beta(config)
return cg.StructInitializer(
NPM1300Config,
(
@@ -254,13 +337,8 @@ def _config(config: ConfigType) -> cg.StructInitializer:
cg.ArrayInitializer(*(_output_config(config.get(key)) for key in OUTPUTS)),
),
("charger", None if charger is None else _charger_config(charger)),
("thermistor_beta", config[CONF_THERMISTOR_BETA]),
(
"thermistor",
NPM1300_UNSET
if resistance is None
else THERMISTOR_RESISTANCES[round(resistance / 1000)],
),
("thermistor_beta", beta),
("thermistor", thermistor),
("charger_configured", charger is not None),
)
+54 -49
View File
@@ -4,9 +4,7 @@
#include <cmath>
#include "esphome/core/hal.h"
#include "esphome/core/log.h"
#ifdef USE_TEXT_SENSOR
#include "esphome/core/progmem.h"
#endif
namespace esphome::npm1300 {
@@ -29,6 +27,7 @@ static constexpr uint16_t REG_BCHG_VTERM = 0x030C;
static constexpr uint16_t REG_BCHG_VTERM_R = 0x030D;
static constexpr uint16_t REG_BCHG_VTRICKLE_SEL = 0x030E;
static constexpr uint16_t REG_BCHG_ITERM_SEL = 0x030F;
static constexpr uint16_t REG_BCHG_NTC_STATUS = 0x0332;
static constexpr uint16_t REG_BCHG_CHARGE_STATUS = 0x0334;
static constexpr uint16_t REG_BCHG_ERR_REASON = 0x0336;
static constexpr uint16_t REG_BUCK1_ENA_SET = 0x0400;
@@ -53,6 +52,9 @@ static constexpr uint16_t REG_SHIP_TASK_SHIP_MODE = 0x0B02;
// VBUSINSTATUS
static constexpr uint8_t VBUS_PRESENT = 0x01;
// NTCSTATUS
static constexpr uint8_t NTC_STATUS_COLD = 0x01;
static constexpr uint8_t NTC_STATUS_HOT = 0x08;
// BCHGCHARGESTATUS; bit 0 (battery detected) is reserved since C00 silicon
static constexpr uint8_t CHARGE_STATUS_COMPLETED = 0x02;
static constexpr uint8_t CHARGE_STATUS_TRICKLE = 0x04;
@@ -107,26 +109,36 @@ float ntc_temperature(uint16_t code, float inv_beta) {
#endif
#ifdef USE_TEXT_SENSOR
PROGMEM_STRING_TABLE(ChargerStatusStrings, "Error", "Paused, Die Too Hot", "Charge Complete", "Trickle Charge",
"Constant Current", "Constant Voltage", "Discharging", "Not Charging");
// BCHGCHARGESTATUS bits in order of priority; bit i is reported as string i + 1
PROGMEM_STRING_TABLE(ChargerStatusStrings, "Discharging", "Error", "Disabled", "Paused, PMIC Too Hot",
"Charge Complete", "Trickle Charge", "Constant Current", "Constant Voltage",
"Paused, Battery Too Cold", "Paused, Battery Too Hot", "Not Charging");
static constexpr uint8_t CHARGER_STATUS_FIRST_BIT = 3;
// BCHGCHARGESTATUS bits in order of priority, reported from string CHARGER_STATUS_FIRST_BIT on
static const uint8_t CHARGER_STATUS_BITS[] PROGMEM = {CHARGE_STATUS_DIE_TEMP_HIGH, CHARGE_STATUS_COMPLETED,
CHARGE_STATUS_TRICKLE, CHARGE_STATUS_CONSTANT_CURRENT,
CHARGE_STATUS_CONSTANT_VOLTAGE};
static uint8_t charger_status_index(uint8_t vbus_status, uint8_t charge_status, uint8_t error_reason) {
if (error_reason != 0)
static uint8_t charger_status_index(const NPM1300Status &status) {
if ((status.vbus & VBUS_PRESENT) == 0)
return 0;
if (status.error_reason != 0)
return 1;
if ((status.charger_enable & 1) == 0)
return 2;
for (size_t i = 0; i < sizeof(CHARGER_STATUS_BITS); i++) {
if ((charge_status & progmem_read_byte(&CHARGER_STATUS_BITS[i])) != 0)
return i + 1;
if ((status.charge & progmem_read_byte(&CHARGER_STATUS_BITS[i])) != 0)
return CHARGER_STATUS_FIRST_BIT + i;
}
return (vbus_status & VBUS_PRESENT) == 0 ? 6 : 7;
// The charger stops without an error outside the cold and hot limits of the battery temperature
if ((status.ntc & NTC_STATUS_COLD) != 0)
return 8;
if ((status.ntc & NTC_STATUS_HOT) != 0)
return 9;
return 10;
}
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, uint8_t vbus_status, uint8_t charge_status,
uint8_t error_reason) {
const uint8_t index = charger_status_index(vbus_status, charge_status, error_reason);
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, const NPM1300Status &status) {
const uint8_t index = charger_status_index(status);
if (index == last)
return;
last = index;
@@ -198,7 +210,7 @@ bool NPM1300Component::configure_charger_(const NPM1300Config &config) {
split_9bit(charger.discharge_limit, discharge);
uint8_t disable = charger.recharge ? 0 : CHARGER_DISABLE_RECHARGE;
// Without a thermistor the charger reports an NTC error and does not charge
if (config.thermistor == NPM1300_UNSET)
if (config.thermistor == 0 || config.thermistor == NPM1300_UNSET)
disable |= CHARGER_DISABLE_NTC;
const uint8_t enable = (CHARGER_DISABLE_RECHARGE | CHARGER_DISABLE_NTC) & ~disable;
if (this->write_register16(REG_BCHG_ISET_MSB, current, sizeof(current)) != i2c::ERROR_OK ||
@@ -292,33 +304,40 @@ void NPM1300Component::hibernate(uint32_t duration_ms) {
}
void NPM1300Component::update() {
uint8_t vbus_status;
uint8_t charge_status;
uint8_t error_reason;
if (!this->status_comm_check(this->read_byte_reg16(REG_VBUSIN_STATUS, &vbus_status) &&
this->read_byte_reg16(REG_BCHG_CHARGE_STATUS, &charge_status) &&
this->read_byte_reg16(REG_BCHG_ERR_REASON, &error_reason)))
NPM1300Status status;
// NTCSTATUS, DIETEMPSTATUS and BCHGCHARGESTATUS
uint8_t charger_status[3];
if (!this->status_comm_check(this->read_byte_reg16(REG_VBUSIN_STATUS, &status.vbus) &&
this->read_byte_reg16(REG_BCHG_ENABLE_SET, &status.charger_enable) &&
this->read_register16(REG_BCHG_NTC_STATUS, charger_status, sizeof(charger_status)) ==
i2c::ERROR_OK &&
this->read_byte_reg16(REG_BCHG_ERR_REASON, &status.error_reason)))
return;
status.ntc = charger_status[0];
status.charge = charger_status[2];
// Without a thermistor the NTC pin is grounded and can read as a hot battery
if (progmem_read_byte(&this->config_->thermistor) == 0)
status.ntc = 0;
// The chip goes back to its default VBUS current limit whenever VBUS is removed
const bool vbus_present = (vbus_status & VBUS_PRESENT) != 0;
const bool vbus_present = (status.vbus & VBUS_PRESENT) != 0;
if (vbus_present && !this->vbus_present_ && this->vbus_current_limit_ != NPM1300_UNSET &&
!this->status_comm_check(this->apply_vbus_current_limit_()))
return;
this->vbus_present_ = vbus_present;
if (error_reason != this->last_error_reason_) {
this->last_error_reason_ = error_reason;
if (error_reason != 0) {
ESP_LOGW(TAG, "Charger error, BCHGERRREASON 0x%02X", error_reason);
if (status.error_reason != this->last_error_reason_) {
this->last_error_reason_ = status.error_reason;
if (status.error_reason != 0) {
ESP_LOGW(TAG, "Charger error, BCHGERRREASON 0x%02X", status.error_reason);
}
}
#ifdef USE_NPM1300_STATUS_PUBLISHER
if (this->status_publisher_ != nullptr)
this->status_publisher_(vbus_status, charge_status, error_reason);
this->status_publisher_(status);
#endif
#ifdef USE_SWITCH
if (!this->status_comm_check(this->publish_switches_()))
if (!this->status_comm_check(this->publish_switches_(status)))
return;
#endif
@@ -348,16 +367,10 @@ void NPM1300Component::update() {
}
#ifdef USE_SWITCH
bool NPM1300Component::publish_switches_() {
bool NPM1300Component::publish_switches_(const NPM1300Status &status) {
PUBLISH_STATE(this->charger_switch_, (status.charger_enable & 1) != 0);
uint8_t value;
bool ok = true;
if (this->charger_switch_ != nullptr) {
if (this->read_byte_reg16(REG_BCHG_ENABLE_SET, &value)) {
this->charger_switch_->publish_state((value & 1) != 0);
} else {
ok = false;
}
}
switch_::Switch *const bucks[2] = {this->buck1_switch_, this->buck2_switch_};
if (bucks[0] != nullptr || bucks[1] != nullptr) {
if (this->read_byte_reg16(REG_BUCK_STATUS, &value)) {
@@ -406,18 +419,8 @@ void NPM1300Component::read_measurements_() {
// BCHGVTERM: 3.50 V to 3.65 V, then 4.00 V to 4.45 V, both in 50 mV steps
static uint16_t termination_voltage_mv(uint8_t code) { return code < 4 ? 3500 + 50 * code : 4000 + 50 * (code - 4); }
static const LogString *output_name(uint8_t index) {
switch (static_cast<NPM1300Output>(index)) {
case NPM1300Output::NPM1300_OUTPUT_BUCK1:
return LOG_STR("BUCK1");
case NPM1300Output::NPM1300_OUTPUT_BUCK2:
return LOG_STR("BUCK2");
case NPM1300Output::NPM1300_OUTPUT_LDO1:
return LOG_STR("LDO1");
default:
return LOG_STR("LDO2");
}
}
// Indexed by NPM1300Output
PROGMEM_STRING_TABLE(OutputNameStrings, "BUCK1", "BUCK2", "LDO1", "LDO2");
void NPM1300Component::dump_config() {
ESP_LOGCONFIG(TAG, "nPM1300:");
@@ -449,7 +452,7 @@ void NPM1300Component::dump_config() {
const NPM1300OutputConfig &output = config.outputs[i];
if (output.voltage == NPM1300_UNSET && output.ldo_mode == NPM1300_UNSET && output.enabled == NPM1300_UNSET)
continue;
ESP_LOGCONFIG(TAG, " %s:", LOG_STR_ARG(output_name(i)));
ESP_LOGCONFIG(TAG, " %s:", LOG_STR_ARG(OutputNameStrings::get_log_str(i, OutputNameStrings::LAST_INDEX)));
if (output.voltage != NPM1300_UNSET) {
ESP_LOGCONFIG(TAG, " Voltage: %u mV", 1000u + output.voltage * 100u);
}
@@ -461,7 +464,9 @@ void NPM1300Component::dump_config() {
ESP_LOGCONFIG(TAG, " Enabled at boot: %s", YESNO(output.enabled != 0));
}
}
if (config.thermistor != NPM1300_UNSET) {
if (config.thermistor == 0) {
ESP_LOGCONFIG(TAG, " Thermistor: none");
} else if (config.thermistor != NPM1300_UNSET) {
ESP_LOGCONFIG(TAG, " Thermistor B constant: %u", config.thermistor_beta);
}
#ifdef USE_SENSOR
+13 -5
View File
@@ -54,10 +54,19 @@ struct NPM1300Config {
NPM1300OutputConfig outputs[NPM1300_OUTPUT_COUNT];
NPM1300ChargerConfig charger; // only applied when charger_configured
uint16_t thermistor_beta;
uint8_t thermistor; // ADCNTCRSEL code: 1 for 10 kOhm, 2 for 47 kOhm, 3 for 100 kOhm, or NPM1300_UNSET
uint8_t thermistor; // ADCNTCRSEL code: 0 for none, 1 for 10 kOhm, 2 for 47 kOhm, 3 for 100 kOhm, or NPM1300_UNSET
bool charger_configured;
};
/// The status registers read on every update
struct NPM1300Status {
uint8_t vbus; // VBUSINSTATUS
uint8_t charger_enable; // BCHGENABLESET
uint8_t ntc; // NTCSTATUS
uint8_t charge; // BCHGCHARGESTATUS
uint8_t error_reason; // BCHGERRREASON
};
#ifdef USE_NPM1300_DATA_PUBLISHER
/// The 10-bit ADC result whose high 8 bits are adc[msb] and low 2 bits are at `shift` in adc[lsbs]
inline uint16_t adc_code(const uint8_t *adc, uint8_t msb, uint8_t lsbs, uint8_t shift) {
@@ -68,8 +77,7 @@ float ntc_temperature(uint16_t code, float inv_beta);
#endif
#ifdef USE_TEXT_SENSOR
/// Publish the charger status text, only when it differs from `last`
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, uint8_t vbus_status, uint8_t charge_status,
uint8_t error_reason);
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, const NPM1300Status &status);
#endif
class NPM1300Component : public PollingComponent, public i2c::I2CDevice {
@@ -95,7 +103,7 @@ class NPM1300Component : public PollingComponent, public i2c::I2CDevice {
float get_setup_priority() const override { return setup_priority::BUS - 1.0f; }
#ifdef USE_NPM1300_STATUS_PUBLISHER
HUB_PUBLISHER(status, uint8_t, uint8_t, uint8_t)
HUB_PUBLISHER(status, const NPM1300Status &)
#endif
#ifdef USE_NPM1300_DATA_PUBLISHER
HUB_PUBLISHER(data, const uint8_t *, float)
@@ -128,7 +136,7 @@ class NPM1300Component : public PollingComponent, public i2c::I2CDevice {
#endif
#ifdef USE_SWITCH
/// Returns false when a status read failed
bool publish_switches_();
bool publish_switches_(const NPM1300Status &status);
#endif
const NPM1300Config *config_;
+6 -5
View File
@@ -21,7 +21,6 @@ from esphome.types import ConfigType
from . import (
ADC,
CONF_NPM1300_ID,
CONF_THERMISTOR_BETA,
CONF_THERMISTOR_RESISTANCE,
CONF_VBUS_CURRENT_LIMIT,
DATA_PUBLISHER,
@@ -30,7 +29,9 @@ from . import (
DUMP_TAG,
IBAT_SCALE,
NPM1300_CHILD_SCHEMA,
THERMISTOR_NONE,
npm1300_ns,
thermistor_beta,
)
DEPENDENCIES = ["npm1300"]
@@ -109,10 +110,10 @@ def _final_validate(config: ConfigType) -> None:
if CONF_BATTERY_TEMPERATURE not in config:
return
hub = fv.get_declaring_config(config[CONF_NPM1300_ID])
if CONF_THERMISTOR_RESISTANCE not in hub:
if hub.get(CONF_THERMISTOR_RESISTANCE, THERMISTOR_NONE) == THERMISTOR_NONE:
raise cv.Invalid(
f"'{CONF_BATTERY_TEMPERATURE}' needs '{CONF_THERMISTOR_RESISTANCE}' "
"set on the npm1300 component",
f"'{CONF_BATTERY_TEMPERATURE}' needs '{CONF_THERMISTOR_RESISTANCE}' set to the "
"nominal resistance of the battery thermistor on the npm1300 component",
path=[CONF_BATTERY_TEMPERATURE],
)
@@ -145,7 +146,7 @@ async def to_code(config: ConfigType) -> None:
if (var := await sensors(CONF_BATTERY_TEMPERATURE, None)) is not None:
hub_config = next(c for c in CORE.config[DOMAIN] if c[CONF_ID] == hub_id)
state = npm1300_ns.ntc_temperature(
_adc(2, 5, 2), 1.0 / hub_config[CONF_THERMISTOR_BETA]
_adc(2, 5, 2), 1.0 / thermistor_beta(hub_config)
)
_add_adc_sensor(hub, var, state, "Battery Temperature")
await sensors(CONF_VBUS_CURRENT_LIMIT, hub.set_vbus_current_limit_sensor)
+12 -4
View File
@@ -15,6 +15,7 @@ from . import (
CONF_THERMISTOR_RESISTANCE,
NPM1300_CHILD_SCHEMA,
OUTPUTS,
THERMISTOR_NONE,
)
DEPENDENCIES = ["npm1300"]
@@ -44,11 +45,18 @@ def _final_validate(config: ConfigType) -> None:
if CONF_CHARGER not in config:
return
hub = fv.get_declaring_config(config[CONF_NPM1300_ID])
# Only the charger block turns off the NTC check, without which the charger never starts
if CONF_CHARGER not in hub and CONF_THERMISTOR_RESISTANCE not in hub:
# A wrong thermistor shifts the battery temperature the charger sees
if CONF_THERMISTOR_RESISTANCE not in hub:
raise cv.Invalid(
f"The '{CONF_CHARGER}' switch needs a '{CONF_CHARGER}' block or "
f"'{CONF_THERMISTOR_RESISTANCE}' on the npm1300 component",
f"The '{CONF_CHARGER}' switch needs '{CONF_THERMISTOR_RESISTANCE}' on the npm1300 "
f"component: the nominal resistance of the battery thermistor, or '{THERMISTOR_NONE}'",
path=[CONF_CHARGER],
)
# Only the charger block turns off the NTC check, without which the charger never starts
if CONF_CHARGER not in hub and hub[CONF_THERMISTOR_RESISTANCE] == THERMISTOR_NONE:
raise cv.Invalid(
f"The '{CONF_CHARGER}' switch needs a '{CONF_CHARGER}' block when "
f"'{CONF_THERMISTOR_RESISTANCE}' is '{THERMISTOR_NONE}'",
path=[CONF_CHARGER],
)
+2 -6
View File
@@ -11,14 +11,12 @@ from esphome.cpp_generator import (
from esphome.types import ConfigType
from . import (
CHARGE_STATUS,
CONF_NPM1300_ID,
DUMP,
DUMP_TAG,
ERROR_REASON,
NPM1300_CHILD_SCHEMA,
STATUS,
STATUS_PUBLISHER,
VBUS_STATUS,
npm1300_ns,
)
@@ -48,9 +46,7 @@ async def to_code(config: ConfigType) -> None:
)
STATUS_PUBLISHER.add(
hub,
npm1300_ns.publish_charger_status(
parent_ref(var), last, VBUS_STATUS, CHARGE_STATUS, ERROR_REASON
),
npm1300_ns.publish_charger_status(parent_ref(var), last, STATUS),
)
DUMP.add(
hub,
+5 -12
View File
@@ -1,24 +1,17 @@
#include "sy6970.h"
#include "esphome/core/hal.h"
#include "esphome/core/log.h"
#include "esphome/core/progmem.h"
namespace esphome::sy6970 {
ESPHOME_LOG_TAG(TAG, "sy6970");
// Indexed by I2CWatchdogTimeout
PROGMEM_STRING_TABLE(I2CWatchdogTimeoutStrings, "Disabled", "40s", "80s", "160s", "Unknown");
static const LogString *i2c_watchdog_timeout_to_string(I2CWatchdogTimeout timeout) {
switch (timeout) {
case I2C_WATCHDOG_DISABLED:
return LOG_STR("Disabled");
case I2C_WATCHDOG_40S:
return LOG_STR("40s");
case I2C_WATCHDOG_80S:
return LOG_STR("80s");
case I2C_WATCHDOG_160S:
return LOG_STR("160s");
default:
return LOG_STR("Unknown");
}
return I2CWatchdogTimeoutStrings::get_log_str(static_cast<uint8_t>(timeout), I2CWatchdogTimeoutStrings::LAST_INDEX);
}
static constexpr uint32_t I2C_WATCHDOG_KICK_INTERVAL_ID = 0;
+9 -34
View File
@@ -1,6 +1,7 @@
#include "tmc22xx.h"
#include "esphome/core/application.h"
#include "esphome/core/log.h"
#include "esphome/core/progmem.h"
#include <cmath>
#include <cstring>
@@ -30,41 +31,15 @@ static constexpr uint8_t UNREACHABLE_POLL_SKIP = 9;
static constexpr uint32_t GSTAT_FLAGS = 0x07; // reset, drv_err, uv_cp
static constexpr uint32_t DRV_STATUS_FLAGS = 0x0FFF;
// Indexed by DriverEvent
PROGMEM_STRING_TABLE(DriverEventStrings, "Driver reset", "Driver error", "Charge pump undervoltage",
"Overtemperature prewarning", "Overtemperature shutdown", "Short to ground on phase A",
"Short to ground on phase B", "Low side short on phase A", "Low side short on phase B",
"Open load on phase A", "Open load on phase B", "Temperature above 120C", "Temperature above 143C",
"Temperature above 150C", "Temperature above 157C", "Unknown");
static const LogString *driver_event_to_string(DriverEvent event) {
switch (event) {
case DRIVER_EVENT_RESET:
return LOG_STR("Driver reset");
case DRIVER_EVENT_DRIVER_ERROR:
return LOG_STR("Driver error");
case DRIVER_EVENT_CHARGE_PUMP_UNDERVOLTAGE:
return LOG_STR("Charge pump undervoltage");
case DRIVER_EVENT_OVERTEMPERATURE_PREWARNING:
return LOG_STR("Overtemperature prewarning");
case DRIVER_EVENT_OVERTEMPERATURE:
return LOG_STR("Overtemperature shutdown");
case DRIVER_EVENT_SHORT_TO_GROUND_A:
return LOG_STR("Short to ground on phase A");
case DRIVER_EVENT_SHORT_TO_GROUND_B:
return LOG_STR("Short to ground on phase B");
case DRIVER_EVENT_LOW_SIDE_SHORT_A:
return LOG_STR("Low side short on phase A");
case DRIVER_EVENT_LOW_SIDE_SHORT_B:
return LOG_STR("Low side short on phase B");
case DRIVER_EVENT_OPEN_LOAD_A:
return LOG_STR("Open load on phase A");
case DRIVER_EVENT_OPEN_LOAD_B:
return LOG_STR("Open load on phase B");
case DRIVER_EVENT_TEMPERATURE_120C:
return LOG_STR("Temperature above 120C");
case DRIVER_EVENT_TEMPERATURE_143C:
return LOG_STR("Temperature above 143C");
case DRIVER_EVENT_TEMPERATURE_150C:
return LOG_STR("Temperature above 150C");
case DRIVER_EVENT_TEMPERATURE_157C:
return LOG_STR("Temperature above 157C");
default:
return LOG_STR("Unknown");
}
return DriverEventStrings::get_log_str(static_cast<uint8_t>(event), DriverEventStrings::LAST_INDEX);
}
// CRC-8 with polynomial 0x07 over the datagram bits in the order they go out on the wire, LSB first
+3 -1
View File
@@ -846,7 +846,9 @@ def convert_visual_temperatures(
that needs ``full_config`` is left for final validation, which runs this again with it."""
if (unit := entity_temperature_unit(config, full_config)) is None:
return config
visual = config[CONF_VISUAL]
# A platform entry that only holds nested entities has no visual section of its own
if (visual := config.get(CONF_VISUAL)) is None:
return config
convert_temperature_keys(visual, (CONF_MIN_TEMPERATURE, CONF_MAX_TEMPERATURE), unit)
section = visual if delta_section is None else visual.get(delta_section)
if section is not None:
@@ -222,6 +222,20 @@ def test_a_resolved_unit_waits_for_the_full_config() -> None:
assert config[CONF_VISUAL][CONF_MIN_TEMPERATURE] == pytest.approx(59.0)
def test_final_validate_skips_a_platform_that_only_holds_nested_climates() -> None:
"""A hub platform may put each of its climates under a key of one platform entry."""
nested = climate_schema(climate_ns.class_("NestedClimate", Climate))
platform_schema = cv.Schema({cv.Optional("zone_1"): nested})
config = platform_schema(
{"zone_1": {CONF_NAME: "Zone 1", CONF_VISUAL: {CONF_MIN_TEMPERATURE: "50°F"}}}
)
# The platform entry itself is not a climate and has no visual section
assert CONF_VISUAL not in config
_final_validate([config])
# The nested climate was converted by its own schema
assert config["zone_1"][CONF_VISUAL][CONF_MIN_TEMPERATURE] == pytest.approx(10.0)
@pytest.mark.parametrize(
("use_fahrenheit", "cn105_lines"),
[
+95 -2
View File
@@ -8,11 +8,16 @@ from esphome.components.npm1300 import (
CHARGER_SCHEMA,
NPM1300_UNSET,
OUTPUT_VOLTAGE,
THERMISTOR_NONE,
VBUS_CURRENT_LIMIT,
_charger_config,
_check_thermistor,
_config,
_output_config,
_termination_voltage_code,
_thermistor_resistance,
_vbus_current_limit_code,
thermistor_beta,
)
from esphome.const import CONF_MODE, CONF_VOLTAGE
from esphome.cpp_generator import StructInitializer
@@ -54,10 +59,35 @@ def test_termination_voltage_gap_rejected(voltage: str) -> None:
CHARGER_SCHEMA({"charge_current": "100mA", "termination_voltage": voltage})
def test_warm_termination_defaults_to_termination() -> None:
def test_warm_termination_defaults_to_reset_value() -> None:
fields = _charger({"charge_current": "100mA", "termination_voltage": "4.1V"})
assert fields["termination_voltage"] == "6"
assert fields["warm_termination_voltage"] == "6"
assert fields["warm_termination_voltage"] == "2"
@pytest.mark.parametrize(
("config", "warns"),
[
({"termination_voltage": "4.2V"}, True),
({"termination_voltage": "3.5V"}, False),
({"termination_voltage": "3.6V"}, False),
({}, False),
({"termination_voltage": "4.2V", "warm_termination_voltage": "4.0V"}, False),
],
)
def test_warm_termination_default_warning(
config: ConfigType, warns: bool, caplog: pytest.LogCaptureFixture
) -> None:
CHARGER_SCHEMA(config)
assert ("warm_termination_voltage" in caplog.text) is warns
@pytest.mark.parametrize(("termination", "code"), [("3.5V", "0"), ("3.55V", "1")])
def test_warm_termination_default_not_above_termination(
termination: str, code: str
) -> None:
fields = _charger({"termination_voltage": termination})
assert fields["warm_termination_voltage"] == code
def test_warm_termination_code() -> None:
@@ -112,3 +142,66 @@ def test_vbus_current_limit_code(limit: str, code: int) -> None:
def test_vbus_current_limit_rejected(limit: str) -> None:
with pytest.raises(cv.Invalid):
VBUS_CURRENT_LIMIT(limit)
def test_charger_needs_thermistor() -> None:
with pytest.raises(cv.Invalid, match="thermistor_resistance"):
_check_thermistor({"charger": {}})
config = {"charger": {}, "thermistor_resistance": THERMISTOR_NONE}
assert _check_thermistor(config) is config
@pytest.mark.parametrize("resistance", [None, THERMISTOR_NONE])
def test_thermistor_beta_needs_resistance(resistance: str | None) -> None:
config = {"thermistor_beta": 3380}
if resistance is not None:
config["thermistor_resistance"] = resistance
with pytest.raises(cv.Invalid, match="thermistor_beta"):
_check_thermistor(config)
@pytest.mark.parametrize(
("resistance", "beta"), [(10000.0, 3380), (47000.0, 4050), (100000.0, 4250)]
)
def test_thermistor_beta_default(resistance: float, beta: int) -> None:
assert thermistor_beta({"thermistor_resistance": resistance}) == beta
def test_thermistor_beta_configured() -> None:
config = {"thermistor_resistance": 47000.0, "thermistor_beta": 3950}
assert thermistor_beta(config) == 3950
@pytest.mark.parametrize(
("resistance", "code", "beta"),
[
(None, str(NPM1300_UNSET), "0"),
(THERMISTOR_NONE, "0", "0"),
(100000.0, "3", "4250"),
],
)
def test_config_thermistor(
resistance: str | float | None, code: str, beta: str
) -> None:
config = {} if resistance is None else {"thermistor_resistance": resistance}
fields = _fields(_config(config))
assert fields["thermistor"] == code
assert fields["thermistor_beta"] == beta
@pytest.mark.parametrize(
("value", "result"),
[
("10kOhm", 10000.0),
("0.047MOhm", 47000.0),
("100000", 100000.0),
("None", "none"),
],
)
def test_thermistor_resistance(value: str, result: float | str) -> None:
assert _thermistor_resistance(value) == result
def test_thermistor_resistance_rejected() -> None:
with pytest.raises(cv.Invalid, match="10kOhm, 47kOhm, 100kOhm or none"):
_thermistor_resistance("22kOhm")
+6
View File
@@ -0,0 +1,6 @@
from tests.testing_helpers import ComponentManifestOverride
def override_manifest(manifest: ComponentManifestOverride) -> None:
# touchscreen.h includes display.h
manifest.dependencies = manifest.dependencies + ["display"]
+42
View File
@@ -0,0 +1,42 @@
#pragma once
#include <array>
#include <gtest/gtest.h>
#include "esphome/components/cst816/touchscreen/cst816_touchscreen.h"
namespace esphome::cst816::testing {
static constexpr uint8_t ADDRESS = 0x15;
// The driver reads REG_STATUS onwards in one transfer: status, gesture, touch count, then two points.
static constexpr size_t FRAME_SIZE = 13;
/// Serves one fixed status frame.
class FrameBus final : public i2c::I2CBus {
public:
explicit FrameBus(std::array<uint8_t, FRAME_SIZE> frame) : frame_(frame) {}
i2c::ErrorCode write_readv(uint8_t address, const uint8_t *write_buffer, size_t write_count, uint8_t *read_buffer,
size_t read_count) override {
EXPECT_EQ(address, ADDRESS);
for (size_t i = 0; i < read_count; i++)
read_buffer[i] = i < FRAME_SIZE ? this->frame_[i] : 0;
return i2c::ERROR_OK;
}
protected:
std::array<uint8_t, FRAME_SIZE> frame_;
};
inline std::array<uint8_t, FRAME_SIZE> make_frame(uint8_t touch_num, uint16_t x = 0, uint16_t y = 0) {
std::array<uint8_t, FRAME_SIZE> frame{};
frame[REG_TOUCH_NUM] = touch_num;
frame[REG_XPOS_HIGH] = (x >> 8) & 0x0F;
frame[REG_XPOS_LOW] = x & 0xFF;
frame[REG_YPOS_HIGH] = (y >> 8) & 0x0F;
frame[REG_YPOS_LOW] = y & 0xFF;
return frame;
}
} // namespace esphome::cst816::testing
@@ -0,0 +1,88 @@
#include <gtest/gtest.h>
#include <memory>
#include "../common.h"
namespace esphome::cst816::testing {
class CST816TouchscreenTest : public ::testing::Test {
protected:
void feed_(const std::array<uint8_t, FRAME_SIZE> &frame) {
this->bus_ = std::make_unique<FrameBus>(frame);
this->touchscreen_.set_i2c_bus(this->bus_.get());
this->touchscreen_.set_i2c_address(ADDRESS);
this->touchscreen_.update_touches();
}
std::unique_ptr<FrameBus> bus_;
CST816Touchscreen touchscreen_;
};
// An idle frame reports 0xFF in the touch count byte and 0xFFF coordinates. Masking 0xFF to the
// low two bits turns that into three touches at the maximum position, a phantom tap.
TEST_F(CST816TouchscreenTest, IdleAllOnesFrameIsIgnored) {
this->feed_(make_frame(0xFF, 0x0FFF, 0x0FFF));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
TEST_F(CST816TouchscreenTest, ZeroTouchCountIsIgnored) {
this->feed_(make_frame(0));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// Three is the boundary the guard rejects: the old mask turned a count of three into three
// touches, so this is the value whose behaviour changes.
TEST_F(CST816TouchscreenTest, TouchCountThreeIsIgnored) {
this->feed_(make_frame(3, 100, 200));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// The count is the whole low nibble, so 0x05 must not be masked down to one touch by a 0x03 mask.
TEST_F(CST816TouchscreenTest, TouchCountFiveIsIgnored) {
this->feed_(make_frame(0x05, 100, 200));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
TEST_F(CST816TouchscreenTest, SingleTouchIsReported) {
this->feed_(make_frame(1, 300, 100));
auto touches = this->touchscreen_.get_touches();
ASSERT_EQ(touches.size(), 1u);
EXPECT_EQ(touches[0].x_raw, 300);
EXPECT_EQ(touches[0].y_raw, 100);
}
// CST826/CST836 can report two points; the driver only consumes the first one.
TEST_F(CST816TouchscreenTest, TwoPointFrameReportsFirstPoint) {
this->feed_(make_frame(2, 300, 100));
auto touches = this->touchscreen_.get_touches();
ASSERT_EQ(touches.size(), 1u);
EXPECT_EQ(touches[0].x_raw, 300);
EXPECT_EQ(touches[0].y_raw, 100);
}
TEST_F(CST816TouchscreenTest, SentinelPositionIsIgnored) {
this->feed_(make_frame(1, 0x0FFF, 100));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// The sentinel is checked on both axes; a valid X with Y=0xFFF is still an idle reading.
TEST_F(CST816TouchscreenTest, SentinelYPositionIsIgnored) {
this->feed_(make_frame(1, 100, 0x0FFF));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// x_raw_max_/y_raw_max_ are calibration endpoints, not validity limits: the base class applies them
// after swapping axes and clamps readings outside them. A touch beyond the calibrated maximum is
// still a real touch and must reach the base class.
TEST_F(CST816TouchscreenTest, CalibrationBoundsDoNotDropTouches) {
this->touchscreen_.set_calibration(0, 240, 0, 320);
this->touchscreen_.set_swap_xy(true);
this->feed_(make_frame(1, 300, 100));
auto touches = this->touchscreen_.get_touches();
ASSERT_EQ(touches.size(), 1u);
EXPECT_EQ(touches[0].x_raw, 100);
EXPECT_EQ(touches[0].y_raw, 300);
}
} // namespace esphome::cst816::testing
+38 -22
View File
@@ -1,29 +1,38 @@
npm1300:
id: pmic
i2c_id: i2c_bus
vbus_current_limit: 500mA
thermistor_resistance: 10kOhm
thermistor_beta: 3380
charger:
charge_current: 150mA
termination_voltage: 4.2V
warm_termination_voltage: 4.0V
termination_current: 20%
trickle_voltage: 2.5V
discharge_current_limit: 1000mA
recharge: true
buck2:
voltage: 3.3V
ldo1:
voltage: 3.3V
mode: ldo
enabled: true
ldo2:
mode: load_switch
enabled: false
- id: pmic
i2c_id: i2c_bus
vbus_current_limit: 500mA
thermistor_resistance: 10kOhm
thermistor_beta: 3380
charger:
charge_current: 150mA
termination_voltage: 4.2V
warm_termination_voltage: 4.0V
termination_current: 20%
trickle_voltage: 2.5V
discharge_current_limit: 1000mA
recharge: true
buck2:
voltage: 3.3V
ldo1:
voltage: 3.3V
mode: ldo
enabled: true
ldo2:
mode: load_switch
enabled: false
# A battery without a thermistor
- id: pmic_no_ntc
i2c_id: i2c_bus
address: 0x6C
thermistor_resistance: none
charger:
termination_voltage: 3.5V
enabled: true
sensor:
- platform: npm1300
npm1300_id: pmic
battery_voltage:
name: Battery Voltage
battery_current:
@@ -41,6 +50,7 @@ sensor:
binary_sensor:
- platform: npm1300
npm1300_id: pmic
vbus_present:
name: VBUS Present
vbus_current_limit_active:
@@ -54,11 +64,13 @@ binary_sensor:
text_sensor:
- platform: npm1300
npm1300_id: pmic
charger_status:
name: Charger Status
switch:
- platform: npm1300
npm1300_id: pmic
charger:
name: Charger
buck1:
@@ -67,6 +79,10 @@ switch:
name: LDO1
ldo2:
name: LDO2
- platform: npm1300
npm1300_id: pmic_no_ntc
charger:
name: Charger Without Thermistor
button:
- platform: template
@@ -1550,6 +1550,15 @@ def test_convert_visual_temperatures(
convert_visual_temperatures({"visual": {}}, delta_keys, delta_section)
def test_convert_visual_temperatures_without_a_visual_section() -> None:
"""A platform entry that only holds nested entities has no visual section and is left alone."""
nested = {"visual": {"min_temperature": (50.0, "°F")}}
config = {"zone_1": nested}
assert convert_visual_temperatures(config, ("step",)) is config
assert nested["visual"]["min_temperature"] == (50.0, "°F")
@pytest.mark.asyncio
async def test_setup_entity_integrations_registers_mqtt_and_web_server(
monkeypatch: pytest.MonkeyPatch, setup_test_environment: list[str]
+7 -1
View File
@@ -1792,7 +1792,13 @@ def test_ccache_env_opt_in_without_binary(
# Explicit IDF_CCACHE_ENABLE=1 forces it on; without a usable binary
# IDF's CMake silently skips ccache, so this branch must say so out loud.
p1, p2, p3 = _ccache_patches(tmp_path, None, tmp_path / "build")
with patch.dict("os.environ", {"IDF_CCACHE_ENABLE": "1"}, clear=True), p1, p2, p3:
with (
patch.dict("os.environ", {"IDF_CCACHE_ENABLE": "1"}, clear=True),
patch("esphome.espidf.framework.shutil.which", return_value=None),
p1,
p2,
p3,
):
env = _ccache_env()
assert env["IDF_CCACHE_ENABLE"] == "1"
assert env["CCACHE_DIR"] == str(tmp_path / "tools" / "ccache")