[api] Keep pending IR/RF transmit replies in a fixed per-connection array

Co-authored-by: J. Nick Koston <nick@home-assistant.io>

.github/workflows/ci.yml

@@ -244,11 +244,20 @@ jobs:
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Read prek version from requirements_test.txt
+        id: prek
+        # requirements_test.txt is the only place the version is pinned, so a
+        # Dependabot bump there is picked up here without a second edit.
+        run: |
+          if ! version=$(sed -nE 's/^prek==([^[:space:]#]+).*/\1/p' requirements_test.txt) || [ -z "$version" ]; then
+            echo "::error::No prek== pin found in requirements_test.txt."
+            exit 1
+          fi
+          echo "version=$version" >> "$GITHUB_OUTPUT"
       - name: Run prek
         uses: j178/prek-action@4e14d07f9231acabce116ccfca13b13dd9755ece # v3.0.0
         with:
-          # Keep in sync with requirements_test.txt.
-          prek-version: "0.4.11"
+          prek-version: ${{ steps.prek.outputs.version }}
           # This job only runs on pull requests, so nothing ever populates
           # the cache on dev. Every run would miss and then write a per-pull
           # request copy, which is what the old seed-cache job existed to

.github/workflows/stale.yml

@@ -33,7 +33,7 @@ jobs:
         and will be closed if no further activity occurs within 7 days.
 
         If you are the author of this PR, please leave a comment if you want
-        to keep it open. Also, please rebase your PR onto the latest dev
+        to keep it open. Also, please merge the latest dev branch into your
         branch to ensure that it's up to date with the latest changes.
 
         Thank you for your contribution!

.github/workflows/sync-dependency-versions.yml

@@ -0,0 +1,94 @@
+# Keeps pre-commit hook revs in sync with the requirements files.
+#
+# Dependabot only bumps the pins in requirements*.txt. Some of those tools
+# are pinned again as hook revs in .pre-commit-config.yaml. This workflow
+# runs script/sync_dependency_versions.py against the pull request branch
+# and pushes a commit with the revs updated.
+
+name: Sync dependency versions
+
+on:
+  # pull_request_target rather than pull_request so the App secret is
+  # available on Dependabot pull requests (pull_request runs opened by
+  # Dependabot only see Dependabot secrets). The job below only touches
+  # branches in this repository and only ever executes the script from the
+  # base branch checkout, so fork code never runs with the token.
+  pull_request_target:
+    types: [opened, synchronize, reopened]
+    paths:
+      - requirements_dev.txt
+      - requirements_test.txt
+      - .pre-commit-config.yaml
+      - script/sync_dependency_versions.py
+
+# The push to the pull request branch uses the App token minted below, so
+# the workflow's GITHUB_TOKEN does not need any scopes.
+permissions: {}
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
+  cancel-in-progress: true
+
+jobs:
+  sync:
+    name: Sync pinned versions
+    runs-on: ubuntu-latest
+    # Same-repository branches only: a push to a fork is not possible with
+    # this token, and it keeps untrusted heads out of a privileged job.
+    if: >-
+      github.repository == 'esphome/esphome'
+      && github.event.pull_request.head.repo.full_name == github.repository
+    steps:
+      - name: Generate a token
+        id: generate-token
+        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
+        with:
+          client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
+          private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
+          # A push made with the workflow's own GITHUB_TOKEN would not start
+          # CI on the new commit; a push with the App token does.
+          permission-contents: write  # git push of the sync commit to the pull request branch
+
+      - name: Check out base branch
+        # Provides the script that runs below. Deliberately the base branch
+        # so the pull request cannot change what executes here.
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+        with:
+          ref: ${{ github.event.pull_request.base.sha }}
+          persist-credentials: false
+
+      - name: Check out pull request branch
+        # No allow-unsafe-pr-checkout here on purpose: checkout v7 only
+        # refuses heads that live in a different repository, and the job
+        # condition above already limits runs to same-repository branches.
+        # Leaving it off keeps that refusal as a backstop for fork heads.
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+        with:
+          ref: ${{ github.event.pull_request.head.ref }}
+          path: pull-request
+          token: ${{ steps.generate-token.outputs.token }}
+
+      - name: Set up Python
+        uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97 # v7.0.0
+        with:
+          python-version: "3.12"
+
+      - name: Install yamlrocks
+        # The script edits YAML through yamlrocks. Take the pin from the
+        # base branch requirements so this workflow has no copy of its own.
+        run: pip install "$(grep -E '^yamlrocks==' requirements_test.txt | cut -d'#' -f1)"
+
+      - name: Sync pinned versions
+        run: python script/sync_dependency_versions.py --root pull-request
+
+      - name: Push changes
+        working-directory: pull-request
+        run: |
+          if git diff --quiet; then
+            echo "All pinned versions already match the requirements files."
+            exit 0
+          fi
+          git config user.name "esphome[bot]"
+          git config user.email "115708604+esphome[bot]@users.noreply.github.com"
+          git commit -am "Sync pinned tool versions with requirements files"
+          git push

.pre-commit-config.yaml

@@ -1,7 +1,6 @@
 ---
 # See https://pre-commit.com for more information
 # See https://pre-commit.com/hooks.html for more hooks
-
 ci:
   autoupdate_commit_msg: 'pre-commit: autoupdate'
   autoupdate_schedule: off  # Disabled until ruff versions are synced between deps and pre-commit
@@ -11,7 +10,7 @@ ci:
 repos:
   - repo: https://github.com/astral-sh/ruff-pre-commit
     # Ruff version.
-    rev: v0.16.3
+    rev: v0.16.6
     hooks:
       # Run the linter.
       - id: ruff
@@ -42,7 +41,7 @@ repos:
       - id: pyupgrade
         args: [--py312-plus]
   - repo: https://github.com/adrienverge/yamllint.git
-    rev: v1.37.1
+    rev: v1.38.0
     hooks:
       - id: yamllint
         exclude: ^(\.clang-format|\.clang-tidy)$

AGENTS.md

@@ -553,6 +553,7 @@ file does, and it is the authority when they disagree. The most useful starting
     4.  **Lint:** Run `prek` to ensure code is compliant.
     5.  **Commit:** Commit your changes. There is no strict format for commit messages.
     6.  **Pull Request:** Submit a PR against the `dev` branch. The Pull Request title must start with a `[tag]` prefix. For component work, use the component name (e.g., `[display] Fix bug`, `[abc123] Add new component`); for changes to shared/core code that isn't tied to a single component, use `[core]` (e.g., `[core] Add validator`). Update documentation, examples, and add `CODEOWNERS` entries as needed. Pull requests should always be made using the `.github/PULL_REQUEST_TEMPLATE.md` template - fill out all sections completely without removing any parts of the template.
+    7.  **Comments:** When commenting on GitHub PRs or issues, don't tag contributors, especially bots. Avoid referring to list items (e.g. from reviews) with the form #nn - this will be interpreted by GitHub as a reference to issue or PR nn. Keep comments short and exclude irrelevant details, backstories, restatement of previous comments and anything that is already obvious to the reader.
 
 *   **Documentation Contributions:**
     *   Documentation is hosted in the separate `esphome/esphome.io` repository.
@@ -839,7 +840,7 @@ file does, and it is the authority when they disagree. The most useful starting
         cv.rename_key(
             CONF_OLD_KEY, CONF_NEW_KEY, removed_in="2026.6.0", component="my_component"
         ),
-        cv.Schema({ ... }),
+        cv.Schema({...}),
     )
     ```
     For other deprecations, warn manually during validation:

Doxyfile

@@ -48,7 +48,7 @@ PROJECT_NAME           = ESPHome
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 2026.9.0b3
+PROJECT_NUMBER         = 2026.10.0-dev
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a

docker/Dockerfile

@@ -22,7 +22,7 @@ RUN \
     -r /requirements.txt
 
 # Install the ESPHome Device Builder dashboard.
-RUN uv pip install --no-cache-dir esphome-device-builder==1.14.5
+RUN uv pip install --no-cache-dir esphome-device-builder==1.14.6
 
 RUN \
     platformio settings set enable_telemetry No \

esphome/api_client.py

@@ -23,9 +23,7 @@ from esphome.util import safe_print
 if TYPE_CHECKING:
     from collections.abc import Callable
 
-    from aioesphomeapi.api_pb2 import (
-        SubscribeLogsResponse,  # pylint: disable=no-name-in-module
-    )
+    from aioesphomeapi.api_pb2 import SubscribeLogsResponse  # pylint: disable=no-name-in-module
 
 
 _LOGGER = logging.getLogger(__name__)

esphome/components/api/api.proto

@@ -77,6 +77,7 @@ service APIConnection {
   rpc serial_proxy_set_modem_pins(SerialProxySetModemPinsRequest) returns (void) {}
   rpc serial_proxy_get_modem_pins(SerialProxyGetModemPinsRequest) returns (void) {}
   rpc serial_proxy_request(SerialProxyRequest) returns (void) {}
+  rpc serial_proxy_set_mode(SerialProxySetModeRequest) returns (void) {}
 }
 
 
@@ -2696,6 +2697,21 @@ message InfraredRFReceiveEvent {
   repeated sint32 timings = 3 [packed = true, (container_pointer_no_template) = "std::vector<int32_t>"];  // Raw timings in microseconds (zigzag-encoded): alternating mark/space periods
 }
 
+// Sent only to the client that issued an InfraredRFTransmitRawTimingsRequest, once the
+// transmitter reports that the transmission (all repeats) has finished, or immediately with
+// success=false if it could not be started (unknown key, no transmitter, no or invalid timings).
+// Lets clients pace requests instead of estimating durations (since API 1.18)
+message InfraredRFTransmitCompleteResponse {
+  option (id) = 153;
+  option (source) = SOURCE_SERVER;
+  option (ifdef) = "USE_IR_RF || USE_RADIO_FREQUENCY";
+  option (no_delay) = true;
+
+  uint32 device_id = 1 [(field_ifdef) = "USE_DEVICES"];
+  fixed32 key = 2 [(force) = true];  // Key of the transmitter entity from the request
+  bool success = 3;                  // false if the transmit never started
+}
+
 // ==================== RADIO FREQUENCY ====================
 
 // Lists available radio frequency entity instances
@@ -2726,7 +2742,8 @@ enum SerialProxyParity {
   SERIAL_PROXY_PARITY_ODD = 2;
 }
 
-// Configure UART parameters for a serial proxy instance
+// Configure UART parameters for a serial proxy instance. Only the subscribed client may
+// configure the port; others are refused with PORT_IN_USE (since API 1.17).
 message SerialProxyConfigureRequest {
   option (id) = 138;
   option (source) = SOURCE_CLIENT;
@@ -2752,7 +2769,8 @@ message SerialProxyDataReceived {
   bytes data = 2;               // Raw data received from the serial device
 }
 
-// Write data to a serial device
+// Write data to a serial device. Only the subscribed client may write; writes from
+// others are ignored (since API 1.17).
 message SerialProxyWriteRequest {
   option (id) = 140;
   option (source) = SOURCE_CLIENT;
@@ -2763,7 +2781,8 @@ message SerialProxyWriteRequest {
   bytes data = 2;               // Raw data to write to the serial device
 }
 
-// Set modem control pin states (RTS and DTR)
+// Set modem control pin states (RTS and DTR). Only the subscribed client may set them;
+// others are refused with PORT_IN_USE (since API 1.17).
 message SerialProxySetModemPinsRequest {
   option (id) = 141;
   option (source) = SOURCE_CLIENT;
@@ -2802,6 +2821,7 @@ enum SerialProxyRequestType {
   // error the device answers with INVALID_ARGUMENT.
   SERIAL_PROXY_REQUEST_TYPE_CONFIGURE = 3;      // Acknowledges a SerialProxyConfigureRequest
   SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS = 4; // Acknowledges a SerialProxySetModemPinsRequest
+  SERIAL_PROXY_REQUEST_TYPE_SET_MODE = 5;       // Acknowledges a SerialProxySetModeRequest (since API 1.17)
 }
 
 enum SerialProxyStatus {
@@ -2814,7 +2834,8 @@ enum SerialProxyStatus {
   SERIAL_PROXY_STATUS_INVALID_ARGUMENT = 6; // Invalid instance index or parameter value
 }
 
-// Generic request message for simple serial proxy operations
+// Generic request message for simple serial proxy operations. FLUSH requires an active
+// subscription; it is refused with PORT_IN_USE otherwise (since API 1.17).
 message SerialProxyRequest {
   option (id) = 144;
   option (source) = SOURCE_CLIENT;
@@ -2838,6 +2859,29 @@ message SerialProxyRequestResponse {
   string error_message = 4;            // Additional detail on failure (optional)
 }
 
+// How a port treats the bytes passing through it. RAW is a plain byte pipe; PROTOCOL
+// activates the port's protocol-aware tap (if one is configured), letting it observe
+// traffic and inject protocol bytes such as acknowledgements. Which protocol the tap
+// speaks is a property of the device configuration, discoverable from the tap
+// component's own API surface. A client that is about to flash firmware selects RAW
+// first, which definitively disables that injection.
+enum SerialProxyMode {
+  SERIAL_PROXY_MODE_RAW = 0;
+  SERIAL_PROXY_MODE_PROTOCOL = 1;
+}
+
+// Only the subscribed client may change the mode; any other caller -- including one that
+// never subscribed -- is refused with PORT_IN_USE. PROTOCOL is refused with NOT_SUPPORTED
+// when the port has no protocol-aware tap configured.
+message SerialProxySetModeRequest {
+  option (id) = 152;
+  option (source) = SOURCE_CLIENT;
+  option (ifdef) = "USE_SERIAL_PROXY";
+
+  uint32 instance = 1;
+  SerialProxyMode mode = 2;
+}
+
 // ==================== BLUETOOTH CONNECTION PARAMS ====================
 message BluetoothSetConnectionParamsRequest {
   option (id) = 145;

esphome/components/api/api_connection.cpp

@@ -1516,6 +1516,18 @@ uint16_t APIConnection::try_send_event_info(EntityBase *entity, APIConnection *c
 
 #if defined(USE_IR_RF) || defined(USE_RADIO_FREQUENCY)
 void APIConnection::on_infrared_rf_transmit_raw_timings_request(const InfraredRFTransmitRawTimingsRequest &msg) {
+#ifdef USE_DEVICES
+  const uint32_t device_id = msg.device_id;
+#else
+  const uint32_t device_id = 0;
+#endif
+  // Register before perform(): blocking transmitters report completion from inside it, and the
+  // non-blocking RMT path flushes the previous frame's completion there
+  const bool want_reply = this->client_supports_api_version(1, 18);
+  if (want_reply) {
+    this->parent_->register_pending_ir_rf_transmit(device_id, msg.key, this);
+  }
+  bool started = false;
   // Dispatch by key: infrared entities are checked first, then radio frequency entities.
   // The key is unique across all entity instances on a device, so at most one lookup will succeed.
 #ifdef USE_INFRARED
@@ -1525,8 +1537,7 @@ void APIConnection::on_infrared_rf_transmit_raw_timings_request(const InfraredRF
     call.set_carrier_frequency(msg.carrier_frequency);
     call.set_raw_timings_packed(msg.timings_data_, msg.timings_length_, msg.timings_count_);
     call.set_repeat_count(msg.repeat_count);
-    call.perform();
-    return;
+    started = call.perform();
   }
 #endif
 #ifdef USE_RADIO_FREQUENCY
@@ -1537,9 +1548,12 @@ void APIConnection::on_infrared_rf_transmit_raw_timings_request(const InfraredRF
     call.set_modulation(static_cast<radio_frequency::RadioFrequencyModulation>(msg.modulation));
     call.set_repeat_count(msg.repeat_count);
     call.set_raw_timings_packed(msg.timings_data_, msg.timings_length_, msg.timings_count_);
-    call.perform();
+    started = call.perform();
   }
 #endif
+  if (want_reply && !started) {
+    this->parent_->fail_pending_ir_rf_transmit(device_id, msg.key, this);
+  }
 }
 #endif
 
@@ -1551,6 +1565,13 @@ void APIConnection::send_infrared_rf_receive_event(const InfraredRFReceiveEvent
     ESP_LOGV(TAG, "IR/RF event dropped, TCP buffer full");
   }
 }
+
+void APIConnection::send_infrared_rf_transmit_complete_response(const InfraredRFTransmitCompleteResponse &msg) {
+  if (!this->send_message(msg)) {
+    // a lost reply stalls the client's pacing until the server side expiry
+    API_LOG_MSG_DROPPED(TAG, "IR/RF transmit complete");
+  }
+}
 #endif
 
 #ifdef USE_SERIAL_PROXY
@@ -1661,6 +1682,7 @@ void APIConnection::on_serial_proxy_request(const SerialProxyRequest &msg) {
       break;
     case enums::SERIAL_PROXY_REQUEST_TYPE_CONFIGURE:
     case enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS:
+    case enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODE:
       // Response-only discriminators; never valid in a request
       ESP_LOGW(TAG, "Response-only serial proxy request type: %" PRIu32, static_cast<uint32_t>(msg.type));
       status = enums::SERIAL_PROXY_STATUS_INVALID_ARGUMENT;
@@ -1673,6 +1695,19 @@ void APIConnection::on_serial_proxy_request(const SerialProxyRequest &msg) {
   send_serial_proxy_ack(this, msg.instance, msg.type, status);
 }
 
+void APIConnection::on_serial_proxy_set_mode_request(const SerialProxySetModeRequest &msg) {
+  auto &proxies = App.get_serial_proxies();
+  if (msg.instance >= proxies.size()) {
+    ESP_LOGW(TAG, "Serial proxy instance %" PRIu32 " out of range", msg.instance);
+    send_serial_proxy_ack(this, msg.instance, enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODE,
+                          enums::SERIAL_PROXY_STATUS_INVALID_ARGUMENT);
+    return;
+  }
+  serial_proxy::SerialProxyResult result = proxies[msg.instance]->set_mode_from_client(this, msg.mode);
+  send_serial_proxy_ack(this, msg.instance, enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODE,
+                        serial_proxy_result_to_status(result));
+}
+
 void APIConnection::send_serial_proxy_data(const SerialProxyDataReceived &msg) {
   if (!this->send_message(msg)) {
     ESP_LOGV(TAG, "Serial proxy data dropped, TCP buffer full");
@@ -1799,7 +1834,7 @@ bool APIConnection::send_hello_response_(const HelloRequest &msg) {
 
   HelloResponse resp;
   resp.api_version_major = 1;
-  resp.api_version_minor = 16;
+  resp.api_version_minor = 18;
   // Send only the version string - the client only logs this for debugging and doesn't use it otherwise
   resp.server_info = ESPHOME_VERSION_REF;
   resp.name = StringRef(App.get_name());

esphome/components/api/api_connection.h

@@ -236,6 +236,7 @@ class APIConnection final : public APIServerConnectionBase {
 #if defined(USE_IR_RF) || defined(USE_RADIO_FREQUENCY)
   void on_infrared_rf_transmit_raw_timings_request(const InfraredRFTransmitRawTimingsRequest &msg);
   void send_infrared_rf_receive_event(const InfraredRFReceiveEvent &msg);
+  void send_infrared_rf_transmit_complete_response(const InfraredRFTransmitCompleteResponse &msg);
 #endif
 
 #ifdef USE_SERIAL_PROXY
@@ -244,6 +245,7 @@ class APIConnection final : public APIServerConnectionBase {
   void on_serial_proxy_set_modem_pins_request(const SerialProxySetModemPinsRequest &msg);
   void on_serial_proxy_get_modem_pins_request(const SerialProxyGetModemPinsRequest &msg);
   void on_serial_proxy_request(const SerialProxyRequest &msg);
+  void on_serial_proxy_set_mode_request(const SerialProxySetModeRequest &msg);
   void send_serial_proxy_data(const SerialProxyDataReceived &msg);
 #endif
 

esphome/components/api/api_pb2.cpp

@@ -4082,6 +4082,24 @@ InfraredRFReceiveEvent::calculate_size() const {
   }
   return size;
 }
+uint8_t *InfraredRFTransmitCompleteResponse::encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) const {
+  uint8_t *__restrict__ pos = buffer.get_pos();
+#ifdef USE_DEVICES
+  ProtoEncode::encode_uint32(pos PROTO_ENCODE_DEBUG_ARG, 1, this->device_id);
+#endif
+  ProtoEncode::write_tag_and_fixed32(pos PROTO_ENCODE_DEBUG_ARG, 21, this->key);
+  ProtoEncode::encode_bool(pos PROTO_ENCODE_DEBUG_ARG, 3, this->success);
+  return pos;
+}
+uint32_t InfraredRFTransmitCompleteResponse::calculate_size() const {
+  uint32_t size = 0;
+#ifdef USE_DEVICES
+  size += ProtoSize::calc_uint32(1, this->device_id);
+#endif
+  size += 5;
+  size += ProtoSize::calc_bool(1, this->success);
+  return size;
+}
 #endif
 #ifdef USE_RADIO_FREQUENCY
 uint8_t *ListEntitiesRadioFrequencyResponse::encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) const {
@@ -4253,6 +4271,19 @@ uint32_t SerialProxyRequestResponse::calculate_size() const {
   size += ProtoSize::calc_length(1, this->error_message.size());
   return size;
 }
+bool SerialProxySetModeRequest::decode_varint(uint32_t field_id, proto_varint_value_t value) {
+  switch (field_id) {
+    case 1:
+      this->instance = value;
+      break;
+    case 2:
+      this->mode = static_cast<enums::SerialProxyMode>(value);
+      break;
+    default:
+      return false;
+  }
+  return true;
+}
 #endif
 #ifdef USE_BLUETOOTH_PROXY_CONNECTIONS
 bool BluetoothSetConnectionParamsRequest::decode_varint(uint32_t field_id, proto_varint_value_t value) {

esphome/components/api/api_pb2.h

@@ -356,6 +356,7 @@ enum SerialProxyRequestType : uint32_t {
   SERIAL_PROXY_REQUEST_TYPE_FLUSH = 2,
   SERIAL_PROXY_REQUEST_TYPE_CONFIGURE = 3,
   SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS = 4,
+  SERIAL_PROXY_REQUEST_TYPE_SET_MODE = 5,
 };
 enum SerialProxyStatus : uint32_t {
   SERIAL_PROXY_STATUS_OK = 0,
@@ -366,6 +367,10 @@ enum SerialProxyStatus : uint32_t {
   SERIAL_PROXY_STATUS_PORT_IN_USE = 5,
   SERIAL_PROXY_STATUS_INVALID_ARGUMENT = 6,
 };
+enum SerialProxyMode : uint32_t {
+  SERIAL_PROXY_MODE_RAW = 0,
+  SERIAL_PROXY_MODE_PROTOCOL = 1,
+};
 #endif
 
 }  // namespace enums
@@ -3236,6 +3241,26 @@ class InfraredRFReceiveEvent final : public ProtoMessage {
 
  protected:
 };
+class InfraredRFTransmitCompleteResponse final : public ProtoMessage {
+ public:
+  static constexpr uint16_t MESSAGE_TYPE = 153;
+  static constexpr uint8_t ESTIMATED_SIZE = 11;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  const LogString *message_name() const override { return LOG_STR("infrared_rf_transmit_complete_response"); }
+#endif
+#ifdef USE_DEVICES
+  uint32_t device_id{0};
+#endif
+  uint32_t key{0};
+  bool success{false};
+  uint8_t *encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) const;
+  uint32_t calculate_size() const;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  const char *dump_to(DumpBuffer &out) const override;
+#endif
+
+ protected:
+};
 #endif
 #ifdef USE_RADIO_FREQUENCY
 class ListEntitiesRadioFrequencyResponse final : public InfoResponseProtoMessage {
@@ -3403,6 +3428,22 @@ class SerialProxyRequestResponse final : public ProtoMessage {
 
  protected:
 };
+class SerialProxySetModeRequest final : public ProtoDecodableMessage {
+ public:
+  static constexpr uint16_t MESSAGE_TYPE = 152;
+  static constexpr uint8_t ESTIMATED_SIZE = 6;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  const LogString *message_name() const override { return LOG_STR("serial_proxy_set_mode_request"); }
+#endif
+  uint32_t instance{0};
+  enums::SerialProxyMode mode{};
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  const char *dump_to(DumpBuffer &out) const override;
+#endif
+
+ protected:
+  bool decode_varint(uint32_t field_id, proto_varint_value_t value) override;
+};
 #endif
 #ifdef USE_BLUETOOTH_PROXY_CONNECTIONS
 class BluetoothSetConnectionParamsRequest final : public ProtoDecodableMessage {

esphome/components/api/api_pb2_dump.cpp

@@ -854,6 +854,8 @@ template<> const char *proto_enum_to_string<enums::SerialProxyRequestType>(enums
       return ESPHOME_PSTR("SERIAL_PROXY_REQUEST_TYPE_CONFIGURE");
     case enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS:
       return ESPHOME_PSTR("SERIAL_PROXY_REQUEST_TYPE_SET_MODEM_PINS");
+    case enums::SERIAL_PROXY_REQUEST_TYPE_SET_MODE:
+      return ESPHOME_PSTR("SERIAL_PROXY_REQUEST_TYPE_SET_MODE");
     default:
       return ESPHOME_PSTR("UNKNOWN");
   }
@@ -878,6 +880,16 @@ template<> const char *proto_enum_to_string<enums::SerialProxyStatus>(enums::Ser
       return ESPHOME_PSTR("UNKNOWN");
   }
 }
+template<> const char *proto_enum_to_string<enums::SerialProxyMode>(enums::SerialProxyMode value) {
+  switch (value) {
+    case enums::SERIAL_PROXY_MODE_RAW:
+      return ESPHOME_PSTR("SERIAL_PROXY_MODE_RAW");
+    case enums::SERIAL_PROXY_MODE_PROTOCOL:
+      return ESPHOME_PSTR("SERIAL_PROXY_MODE_PROTOCOL");
+    default:
+      return ESPHOME_PSTR("UNKNOWN");
+  }
+}
 #endif
 
 const char *HelloRequest::dump_to(DumpBuffer &out) const {
@@ -2728,6 +2740,15 @@ const char *InfraredRFReceiveEvent::dump_to(DumpBuffer &out) const {
   }
   return out.c_str();
 }
+const char *InfraredRFTransmitCompleteResponse::dump_to(DumpBuffer &out) const {
+  MessageDumpHelper helper(out, ESPHOME_PSTR("InfraredRFTransmitCompleteResponse"));
+#ifdef USE_DEVICES
+  dump_field(out, ESPHOME_PSTR("device_id"), this->device_id);
+#endif
+  dump_field(out, ESPHOME_PSTR("key"), this->key);
+  dump_field(out, ESPHOME_PSTR("success"), this->success);
+  return out.c_str();
+}
 #endif
 #ifdef USE_RADIO_FREQUENCY
 const char *ListEntitiesRadioFrequencyResponse::dump_to(DumpBuffer &out) const {
@@ -2805,6 +2826,12 @@ const char *SerialProxyRequestResponse::dump_to(DumpBuffer &out) const {
   dump_field(out, ESPHOME_PSTR("error_message"), this->error_message);
   return out.c_str();
 }
+const char *SerialProxySetModeRequest::dump_to(DumpBuffer &out) const {
+  MessageDumpHelper helper(out, ESPHOME_PSTR("SerialProxySetModeRequest"));
+  dump_field(out, ESPHOME_PSTR("instance"), this->instance);
+  dump_field(out, ESPHOME_PSTR("mode"), static_cast<enums::SerialProxyMode>(this->mode));
+  return out.c_str();
+}
 #endif
 #ifdef USE_BLUETOOTH_PROXY_CONNECTIONS
 const char *BluetoothSetConnectionParamsRequest::dump_to(DumpBuffer &out) const {

esphome/components/api/api_pb2_service.cpp

@@ -712,6 +712,17 @@ void APIConnection::read_message_(uint32_t msg_size, uint32_t msg_type, const ui
       this->on_device_capabilities_request();
       break;
     }
+#ifdef USE_SERIAL_PROXY
+    case SerialProxySetModeRequest::MESSAGE_TYPE: {
+      SerialProxySetModeRequest msg;
+      msg.decode(msg_data, msg_size);
+#ifdef HAS_PROTO_MESSAGE_DUMP
+      this->log_receive_message_(LOG_STR("on_serial_proxy_set_mode_request"), msg);
+#endif
+      this->on_serial_proxy_set_mode_request(msg);
+      break;
+    }
+#endif
     default:
       break;
   }

esphome/components/api/api_pb2_service.h

@@ -235,6 +235,9 @@ class APIServerConnectionBase {
   void on_serial_proxy_request(const SerialProxyRequest &value){};
 #endif
 
+#ifdef USE_SERIAL_PROXY
+  void on_serial_proxy_set_mode_request(const SerialProxySetModeRequest &value){};
+#endif
 #ifdef USE_BLUETOOTH_PROXY_CONNECTIONS
   void on_bluetooth_set_connection_params_request(const BluetoothSetConnectionParamsRequest &value){};
 #endif

esphome/components/api/api_server.cpp

@@ -193,6 +193,9 @@ void APIServer::remove_client_(uint8_t client_index) {
 
 #ifdef USE_API_USER_DEFINED_ACTION_RESPONSES
   this->unregister_active_action_calls_for_connection(client.get());
+#endif
+#if defined(USE_IR_RF) || defined(USE_RADIO_FREQUENCY)
+  this->unregister_pending_ir_rf_transmits_for_connection_(client.get());
 #endif
   ESP_LOGV(TAG, "Remove connection %s", client->get_name());
 
@@ -417,6 +420,93 @@ void APIServer::send_infrared_rf_receive_event([[maybe_unused]] uint32_t device_
   for (auto &c : this->active_clients())
     c->send_infrared_rf_receive_event(resp);
 }
+
+// Safety net for transmitters that never report completion (for example a failed component)
+static constexpr uint32_t IR_RF_TRANSMIT_TIMEOUT_MS = 30000;
+static constexpr char IR_RF_TRANSMIT_TIMEOUT[] = "ir_rf_tx";
+
+void APIServer::register_pending_ir_rf_transmit(uint32_t device_id, uint32_t key, APIConnection *conn) {
+  if (this->pending_ir_rf_count_ == this->pending_ir_rf_transmits_.size()) {
+    // only an unpaced client gets here; its oldest request is answered as not started
+    this->complete_pending_ir_rf_transmit_(0, false);
+  }
+  this->pending_ir_rf_transmits_[this->pending_ir_rf_count_++] = {device_id, key, App.get_loop_component_start_time(),
+                                                                  conn};
+  if (this->pending_ir_rf_count_ == 1) {
+    this->set_timeout(IR_RF_TRANSMIT_TIMEOUT, IR_RF_TRANSMIT_TIMEOUT_MS,
+                      [this]() { this->expire_pending_ir_rf_transmits_(); });
+  }
+}
+
+void APIServer::fail_pending_ir_rf_transmit(uint32_t device_id, uint32_t key, APIConnection *conn) {
+  auto &pending = this->pending_ir_rf_transmits_;
+  for (size_t i = this->pending_ir_rf_count_; i-- > 0;) {
+    if (pending[i].connection == conn && pending[i].key == key && pending[i].device_id == device_id) {
+      this->complete_pending_ir_rf_transmit_(i, false);
+      return;
+    }
+  }
+}
+
+void APIServer::send_infrared_rf_transmit_complete(const EntityBase &entity) {
+  uint32_t device_id = 0;
+#ifdef USE_DEVICES
+  device_id = entity.get_device_id();
+#endif
+  const uint32_t key = entity.get_object_id_hash();
+  auto &pending = this->pending_ir_rf_transmits_;
+  for (size_t i = 0; i < this->pending_ir_rf_count_; i++) {
+    if (pending[i].key == key && pending[i].device_id == device_id) {
+      this->complete_pending_ir_rf_transmit_(i, true);
+      return;
+    }
+  }
+}
+
+void APIServer::complete_pending_ir_rf_transmit_(size_t index, bool success) {
+  const auto &entry = this->pending_ir_rf_transmits_[index];
+  InfraredRFTransmitCompleteResponse resp{};
+#ifdef USE_DEVICES
+  resp.device_id = entry.device_id;
+#endif
+  resp.key = entry.key;
+  resp.success = success;
+  entry.connection->send_infrared_rf_transmit_complete_response(resp);
+  this->erase_pending_ir_rf_transmit_(index);
+}
+
+void APIServer::erase_pending_ir_rf_transmit_(size_t index) {
+  auto &pending = this->pending_ir_rf_transmits_;
+  for (size_t i = index + 1; i < this->pending_ir_rf_count_; i++) {
+    pending[i - 1] = pending[i];
+  }
+  this->pending_ir_rf_count_--;
+}
+
+void APIServer::unregister_pending_ir_rf_transmits_for_connection_(APIConnection *conn) {
+  auto &pending = this->pending_ir_rf_transmits_;
+  uint8_t kept = 0;
+  for (size_t i = 0; i < this->pending_ir_rf_count_; i++) {
+    if (pending[i].connection != conn) {
+      pending[kept++] = pending[i];
+    }
+  }
+  this->pending_ir_rf_count_ = kept;
+}
+
+// A timer firing on an empty list is harmless, so nothing cancels it
+void APIServer::expire_pending_ir_rf_transmits_() {
+  const uint32_t now = App.get_loop_component_start_time();
+  auto &pending = this->pending_ir_rf_transmits_;
+  while (this->pending_ir_rf_count_ != 0 && now - pending[0].registered_ms >= IR_RF_TRANSMIT_TIMEOUT_MS) {
+    ESP_LOGW(TAG, "IR/RF transmit %" PRIu32 " never reported completion", pending[0].key);
+    this->complete_pending_ir_rf_transmit_(0, false);
+  }
+  if (this->pending_ir_rf_count_ != 0) {
+    this->set_timeout(IR_RF_TRANSMIT_TIMEOUT, IR_RF_TRANSMIT_TIMEOUT_MS - (now - pending[0].registered_ms),
+                      [this]() { this->expire_pending_ir_rf_transmits_(); });
+  }
+}
 #endif
 
 #ifdef USE_ALARM_CONTROL_PANEL

esphome/components/api/api_server.h

@@ -196,6 +196,10 @@ class APIServer final : public Component,
 #endif
 #if defined(USE_IR_RF) || defined(USE_RADIO_FREQUENCY)
   void send_infrared_rf_receive_event(uint32_t device_id, uint32_t key, const std::vector<int32_t> *timings);
+  // Completion replies for InfraredRFTransmitRawTimingsRequest (API 1.18+); register before perform()
+  void register_pending_ir_rf_transmit(uint32_t device_id, uint32_t key, APIConnection *conn);
+  void fail_pending_ir_rf_transmit(uint32_t device_id, uint32_t key, APIConnection *conn);
+  void send_infrared_rf_transmit_complete(const EntityBase &entity);
 #endif
 
   bool is_connected() const { return this->api_connection_count_ != 0; }
@@ -342,6 +346,24 @@ class APIServer final : public Component,
   uint32_t next_action_call_id_{1};  // Counter for generating unique action_call_ids
 #endif                               // USE_API_USER_DEFINED_ACTION_RESPONSES
 #endif
+#if defined(USE_IR_RF) || defined(USE_RADIO_FREQUENCY)
+  struct PendingIrRfTransmit {
+    uint32_t device_id;
+    uint32_t key;
+    uint32_t registered_ms;
+    APIConnection *connection;
+  };
+  // FIFO per entity: entities forward only completions of frames they submitted, and each
+  // completion pops the oldest match, so entries are never reordered. One slot per connection:
+  // a pacing client has at most one transmit outstanding. Unlike action calls, transmits share
+  // one named expiry timer, since a scheduler item per entry would churn the heap.
+  std::array<PendingIrRfTransmit, MAX_API_CONNECTIONS> pending_ir_rf_transmits_{};
+  uint8_t pending_ir_rf_count_{0};
+  void complete_pending_ir_rf_transmit_(size_t index, bool success);
+  void erase_pending_ir_rf_transmit_(size_t index);
+  void unregister_pending_ir_rf_transmits_for_connection_(APIConnection *conn);
+  void expire_pending_ir_rf_transmits_();
+#endif
 #ifdef USE_API_HOMEASSISTANT_ACTION_RESPONSES
   struct PendingActionResponse {
     uint32_t call_id;

esphome/components/debug/sensor.py

@@ -23,11 +23,7 @@ from esphome.const import (
 )
 from esphome.types import ConfigType
 
-from . import (  # noqa: F401  pylint: disable=unused-import
-    CONF_DEBUG_ID,
-    FILTER_SOURCE_FILES,
-    DebugComponent,
-)
+from . import CONF_DEBUG_ID, FILTER_SOURCE_FILES, DebugComponent  # noqa: F401  pylint: disable=unused-import
 
 DEPENDENCIES = ["debug"]
 

esphome/components/debug/text_sensor.py

@@ -9,11 +9,7 @@ from esphome.const import (
 )
 from esphome.types import ConfigType
 
-from . import (  # noqa: F401  pylint: disable=unused-import
-    CONF_DEBUG_ID,
-    FILTER_SOURCE_FILES,
-    DebugComponent,
-)
+from . import CONF_DEBUG_ID, FILTER_SOURCE_FILES, DebugComponent  # noqa: F401  pylint: disable=unused-import
 
 DEPENDENCIES = ["debug"]
 

esphome/components/deep_sleep/deep_sleep_bk72xx.cpp

@@ -44,7 +44,7 @@ bool DeepSleepComponent::prepare_to_sleep_() {
           this->status_set_warning();
           ESP_LOGV(TAG, "Waiting for pin to switch state to enter deep sleep...");
         }
-        this->next_enter_deep_sleep_ = true;
+        this->defer_sleep_();
         return false;
       }
     }

esphome/components/deep_sleep/deep_sleep_component.cpp

@@ -17,6 +17,7 @@ void DeepSleepComponent::setup() {
 
 void DeepSleepComponent::schedule_sleep_() {
   this->next_enter_deep_sleep_ = false;
+  this->disable_loop();
   const optional<uint32_t> run_duration = get_run_duration_();
   if (run_duration.has_value()) {
     ESP_LOGI(TAG, "Scheduling in %" PRIu32 " ms", *run_duration);
@@ -45,7 +46,7 @@ void DeepSleepComponent::loop() {
 
 void DeepSleepComponent::begin_sleep(bool manual) {
   if (this->prevent_ && !manual) {
-    this->next_enter_deep_sleep_ = true;
+    this->defer_sleep_();
     return;
   }
 

esphome/components/deep_sleep/deep_sleep_component.h

@@ -190,6 +190,11 @@ class DeepSleepComponent final : public Component {
   void schedule_sleep_();
   bool should_teardown_();
 
+  void defer_sleep_() {
+    this->next_enter_deep_sleep_ = true;
+    this->enable_loop();
+  }
+
 #ifdef USE_BK72XX
   bool pin_prevents_sleep_(WakeUpPinItem &pin_item) const;
   bool get_real_pin_state_(InternalGPIOPin &pin) const { return (pin.digital_read() ^ pin.is_inverted()); }

esphome/components/deep_sleep/deep_sleep_esp32.cpp

@@ -100,7 +100,7 @@ bool DeepSleepComponent::prepare_to_sleep_() {
       this->status_set_warning();
       ESP_LOGW(TAG, "Waiting for wakeup pin state change");
     }
-    this->next_enter_deep_sleep_ = true;
+    this->defer_sleep_();
     return false;
   }
   return true;

esphome/components/es7210/es7210.cpp

@@ -153,13 +153,14 @@ bool ES7210::configure_mic_gain_() {
   ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_MIC2_GAIN_REG44, 0x0f, regv));
 
   // Configure mic 3
-  ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_CLOCK_OFF_REG01, 0x0b, 0x00));
+  // MIC3 uses the ADC3/4 and MIC3/4 clock domains (bits 2 and 4), not the MIC1/2 domains.
+  ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_CLOCK_OFF_REG01, 0x15, 0x00));
   ES7210_ERROR_CHECK(this->write_byte(ES7210_MIC34_POWER_REG4C, 0x00));
   ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_MIC3_GAIN_REG45, 0x10, 0x10));
   ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_MIC3_GAIN_REG45, 0x0f, regv));
 
   // Configure mic 4
-  ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_CLOCK_OFF_REG01, 0x0b, 0x00));
+  ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_CLOCK_OFF_REG01, 0x15, 0x00));
   ES7210_ERROR_CHECK(this->write_byte(ES7210_MIC34_POWER_REG4C, 0x00));
   ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_MIC4_GAIN_REG46, 0x10, 0x10));
   ES7210_ERROR_CHECK(this->es7210_update_reg_bit_(ES7210_MIC4_GAIN_REG46, 0x0f, regv));

esphome/components/esp32/const.py

@@ -3,18 +3,11 @@ import esphome.codegen as cg
 # Re-exported for the many esp32-side users; defined in esphome.const
 # and esphome.espidf so the upload/logs fast path can use them without
 # importing this package.
-from esphome.const import (  # noqa: F401  # pylint: disable=unused-import
-    KEY_ESP32,
-    KEY_FLASH_SIZE,
-    KEY_IDF_VERSION,
-    KEY_VARIANT,
-)
+from esphome.const import KEY_ESP32, KEY_FLASH_SIZE, KEY_IDF_VERSION, KEY_VARIANT  # noqa: F401  # pylint: disable=unused-import
 
 # Back compat for external components only; in-tree callers import it
 # from esphome.espidf directly.
-from esphome.espidf import (  # noqa: F401  # pylint: disable=unused-import
-    variant_to_idf_target,
-)
+from esphome.espidf import variant_to_idf_target  # noqa: F401  # pylint: disable=unused-import
 
 KEY_BOARD = "board"
 KEY_SDKCONFIG_OPTIONS = "sdkconfig_options"

esphome/components/infrared/infrared.cpp

@@ -47,11 +47,7 @@ InfraredCall &InfraredCall::set_repeat_count(uint32_t count) {
   return *this;
 }
 
-void InfraredCall::perform() {
-  if (this->parent_ != nullptr) {
-    this->parent_->control(*this);
-  }
-}
+bool InfraredCall::perform() { return this->parent_ != nullptr && this->parent_->control(*this); }
 
 // ========== Infrared ==========
 
@@ -64,6 +60,15 @@ void Infrared::setup() {
   if (this->receiver_ != nullptr) {
     this->receiver_->register_listener(this);
   }
+#if defined(USE_API) && defined(USE_IR_RF)
+  if (this->transmitter_ != nullptr) {
+    // only frames this entity submitted; YAML automations share the transmitter
+    this->transmitter_->set_on_complete_callback([this](uint32_t seq) {
+      if (seq == this->inflight_seq_)
+        this->notify_transmit_complete_();
+    });
+  }
+#endif
 }
 
 void Infrared::dump_config() {
@@ -75,15 +80,15 @@ void Infrared::dump_config() {
                 YESNO(this->traits_.get_supports_receiver()));
 }
 
-void Infrared::control(const InfraredCall &call) {
+bool Infrared::control(const InfraredCall &call) {
   if (this->transmitter_ == nullptr) {
     ESP_LOGW(TAG, "No transmitter configured");
-    return;
+    return false;
   }
 
   if (!call.has_raw_timings()) {
     ESP_LOGE(TAG, "No raw timings provided");
-    return;
+    return false;
   }
 
   // Create transmit data object
@@ -107,7 +112,7 @@ void Infrared::control(const InfraredCall &call) {
     // Decode base64url (URL-safe) into transmit buffer
     if (!transmit_data->set_data_from_base64url(call.get_base64url_data())) {
       ESP_LOGE(TAG, "Invalid base64url data");
-      return;
+      return false;
     }
     // Sanity check: validate timing values are within reasonable bounds
     constexpr int32_t max_timing_us = 500000;  // 500ms absolute max
@@ -115,7 +120,7 @@ void Infrared::control(const InfraredCall &call) {
       int32_t abs_timing = timing < 0 ? -timing : timing;
       if (abs_timing > max_timing_us) {
         ESP_LOGE(TAG, "Invalid timing value: %" PRId32 " µs (max %" PRId32 ")", timing, max_timing_us);
-        return;
+        return false;
       }
     }
     ESP_LOGD(TAG, "Transmitting base64url raw timings: count=%zu, repeat=%" PRIu32, transmit_data->get_data().size(),
@@ -133,7 +138,16 @@ void Infrared::control(const InfraredCall &call) {
   }
 
   // Perform transmission
+  this->inflight_seq_ = transmit_call.get_seq();
   transmit_call.perform();
+  return true;
+}
+
+void Infrared::notify_transmit_complete_() {
+#if defined(USE_API) && defined(USE_IR_RF)
+  if (api::global_api_server != nullptr)
+    api::global_api_server->send_infrared_rf_transmit_complete(*this);
+#endif
 }
 
 uint32_t Infrared::get_capability_flags() const {

esphome/components/infrared/infrared.h

@@ -54,8 +54,8 @@ class InfraredCall {
   /// Set the number of times to repeat transmission (1 = transmit once, 2 = transmit twice, etc.)
   InfraredCall &set_repeat_count(uint32_t count);
 
-  /// Perform the transmission
-  void perform();
+  /// Perform the transmission; returns true if a frame was handed to the transmitter
+  bool perform();
 
   /// Get the carrier frequency
   const optional<uint32_t> &get_carrier_frequency() const { return this->carrier_frequency_; }
@@ -145,8 +145,11 @@ class Infrared : public Component, public EntityBase, public remote_base::Remote
  protected:
   friend class InfraredCall;
 
-  /// Perform the actual transmission (called by InfraredCall)
-  virtual void control(const InfraredCall &call);
+  /// Perform the actual transmission (called by InfraredCall); false if nothing was transmitted
+  virtual bool control(const InfraredCall &call);
+  /// Forwards the transmitter's completion to the API server
+  void notify_transmit_complete_();
+  uint32_t inflight_seq_{0};  // seq of the frame this entity submitted last
 
   // Underlying hardware components
   remote_base::RemoteReceiverBase *receiver_{nullptr};

esphome/components/ir_rf_proxy/ir_rf_proxy.cpp

@@ -12,16 +12,16 @@ static const char *const TAG = "ir_rf_proxy";
 // Static template: all instantiations occur in this translation unit.
 
 template<typename CallT>
-static void transmit_raw_timings(remote_base::RemoteTransmitterBase *transmitter, uint32_t carrier_frequency,
-                                 const CallT &call) {
+static bool transmit_raw_timings(remote_base::RemoteTransmitterBase *transmitter, uint32_t carrier_frequency,
+                                 const CallT &call, uint32_t &inflight_seq) {
   if (transmitter == nullptr) {
     ESP_LOGW(TAG, "No transmitter configured");
-    return;
+    return false;
   }
 
   if (!call.has_raw_timings()) {
     ESP_LOGE(TAG, "No raw timings provided");
-    return;
+    return false;
   }
 
   auto transmit_call = transmitter->transmit();
@@ -36,14 +36,14 @@ static void transmit_raw_timings(remote_base::RemoteTransmitterBase *transmitter
   } else if (call.is_base64url()) {
     if (!transmit_data->set_data_from_base64url(call.get_base64url_data())) {
       ESP_LOGE(TAG, "Invalid base64url data");
-      return;
+      return false;
     }
     constexpr int32_t max_timing_us = 500000;
     for (int32_t timing : transmit_data->get_data()) {
       int32_t abs_timing = timing < 0 ? -timing : timing;
       if (abs_timing > max_timing_us) {
         ESP_LOGE(TAG, "Invalid timing value: %" PRId32 " µs (max %" PRId32 ")", timing, max_timing_us);
-        return;
+        return false;
       }
     }
     ESP_LOGD(TAG, "Transmitting base64url raw timings: count=%zu, repeat=%" PRIu32, transmit_data->get_data().size(),
@@ -58,7 +58,9 @@ static void transmit_raw_timings(remote_base::RemoteTransmitterBase *transmitter
     transmit_call.set_send_times(call.get_repeat_count());
   }
 
+  inflight_seq = transmit_call.get_seq();
   transmit_call.perform();
+  return true;
 }
 
 // ========== IrRfProxy (Infrared platform) ==========
@@ -80,9 +82,9 @@ void IrRfProxy::dump_config() {
   }
 }
 
-void IrRfProxy::control(const infrared::InfraredCall &call) {
+bool IrRfProxy::control(const infrared::InfraredCall &call) {
   uint32_t carrier = call.get_carrier_frequency().value_or(0);
-  transmit_raw_timings(this->transmitter_, carrier, call);
+  return transmit_raw_timings(this->transmitter_, carrier, call, this->inflight_seq_);
 }
 
 #endif  // USE_IR_RF
@@ -101,6 +103,15 @@ void RfProxy::setup() {
   if (this->receiver_ != nullptr) {
     this->receiver_->register_listener(this);
   }
+#if defined(USE_API) && defined(USE_RADIO_FREQUENCY)
+  if (this->transmitter_ != nullptr) {
+    // only frames this entity submitted; YAML automations share the transmitter
+    this->transmitter_->set_on_complete_callback([this](uint32_t seq) {
+      if (seq == this->inflight_seq_)
+        this->notify_transmit_complete_();
+    });
+  }
+#endif
 }
 
 void RfProxy::dump_config() {
@@ -122,11 +133,11 @@ void RfProxy::dump_config() {
   }
 }
 
-void RfProxy::control(const radio_frequency::RadioFrequencyCall &call) {
+bool RfProxy::control(const radio_frequency::RadioFrequencyCall &call) {
   // RF: no IR carrier modulation.  Any RF front-end coordination (state turnaround, retuning)
   // happens via the radio_frequency entity's on_control trigger and remote_transmitter's
   // on_transmit/on_complete triggers — wired up in user YAML.
-  transmit_raw_timings(this->transmitter_, 0, call);
+  return transmit_raw_timings(this->transmitter_, 0, call, this->inflight_seq_);
 }
 
 #endif  // USE_RADIO_FREQUENCY

esphome/components/ir_rf_proxy/ir_rf_proxy.h

@@ -35,7 +35,7 @@ class IrRfProxy final : public infrared::Infrared {
   void set_receiver_frequency(uint32_t frequency_hz) { this->get_traits().set_receiver_frequency_hz(frequency_hz); }
 
  protected:
-  void control(const infrared::InfraredCall &call) override;
+  bool control(const infrared::InfraredCall &call) override;
 
   // RF frequency in kHz (Hz / 1000); 0 = infrared, non-zero = RF
   uint32_t frequency_khz_{0};
@@ -63,7 +63,7 @@ class RfProxy final : public radio_frequency::RadioFrequency {
   void set_frequency_hz(uint32_t freq_hz) { this->traits_.set_fixed_frequency_hz(freq_hz); }
 
  protected:
-  void control(const radio_frequency::RadioFrequencyCall &call) override;
+  bool control(const radio_frequency::RadioFrequencyCall &call) override;
 
   remote_base::RemoteTransmitterBase *transmitter_{nullptr};
   remote_base::RemoteReceiverBase *receiver_{nullptr};

esphome/components/logger/logger_esp32.cpp

@@ -3,6 +3,7 @@
 
 #include "esphome/components/esp32/crash_handler.h"
 #include <esp_log.h>
+#include <esp_idf_version.h>
 
 #include <driver/uart.h>
 #include <soc/soc_caps.h>
@@ -16,8 +17,10 @@
 #include <driver/usb_serial_jtag_vfs.h>
 #endif
 #endif
-
-#include "esp_idf_version.h"
+#if defined(CONFIG_PM_ENABLE) && defined(CONFIG_FREERTOS_USE_TICKLESS_IDLE) && \
+    (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(6, 0, 0))
+#include "esp_sleep.h"
+#endif
 #include "freertos/FreeRTOS.h"
 
 #include <fcntl.h>
@@ -87,6 +90,12 @@ void init_uart(uart_port_t uart_num, uint32_t baud_rate, int tx_buffer_size) {
   // ESP-IDF requires rx_buffer_size > UART_HW_FIFO_LEN (128 bytes).
   const int min_rx_buffer_size = UART_HW_FIFO_LEN(uart_num) + 1;
   uart_driver_install(uart_num, min_rx_buffer_size, tx_buffer_size, 0, nullptr, 0);
+#if defined(CONFIG_PM_ENABLE) && defined(CONFIG_FREERTOS_USE_TICKLESS_IDLE) && \
+    (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(6, 0, 0))
+  // Always flush before going to light sleep. Could be disabled for devices
+  // without TOP_PD or if source_clk = UART_SCLK_RTC
+  esp_sleep_set_console_uart_handling_mode(ESP_SLEEP_ALWAYS_FLUSH_UART);
+#endif
 }
 
 void Logger::pre_setup() {

esphome/components/mipi_dsi/mipi_dsi.cpp

@@ -35,8 +35,8 @@ void MipiDsi::setup() {
       .bus_id = 0,  // index from 0, specify the DSI host to use
       .num_data_lanes =
           this->lanes_,  // Number of data lanes to use, can't set a value that exceeds the chip's capability
-      .phy_clk_src = MIPI_DSI_PHY_CLK_SRC_DEFAULT,  // Clock source for the DPHY
-      .lane_bit_rate_mbps = this->lane_bit_rate_,   // Bit rate of the data lanes, in Mbps
+      // phy_clk_src left at 0 to enable runtime auto-select.
+      .lane_bit_rate_mbps = this->lane_bit_rate_,  // Bit rate of the data lanes, in Mbps
   };
   auto err = esp_lcd_new_dsi_bus(&bus_config, &this->bus_handle_);
   if (err != ESP_OK) {

esphome/components/mlx90614/mlx90614.cpp

@@ -26,44 +26,129 @@ static const uint8_t MLX90614_ID4 = 0x3F;
 
 static const char *const TAG = "mlx90614";
 
+// The EEPROM cell has a limited number of write cycles, so stop retrying after a few failures
+static constexpr uint8_t EMISSIVITY_WRITE_ATTEMPTS = 3;
+
+// SMBus packet error code: CRC-8 with polynomial 0x07, MSB first
+static uint8_t crc8_pec(const uint8_t *data, uint8_t len) { return crc8(data, len, 0x00, 0x07, true); }
+
 void MLX90614Component::setup() {
-  if (!this->write_emissivity_()) {
-    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
-    this->mark_failed();
+  if (std::isnan(this->emissivity_)) {
     return;
   }
+  this->emissivity_write_attempts_ = EMISSIVITY_WRITE_ATTEMPTS;
+  this->try_write_emissivity_();
+  if (this->emissivity_write_attempts_ != 0) {
+    this->status_set_warning(LOG_STR("Failed to write emissivity, will retry"));
+  }
+}
+
+void MLX90614Component::try_write_emissivity_() {
+  if (this->emissivity_write_attempts_ == 0) {
+    return;
+  }
+  if (this->write_emissivity_()) {
+    this->emissivity_write_attempts_ = 0;
+    return;
+  }
+  if (--this->emissivity_write_attempts_ == 0) {
+    ESP_LOGE(TAG, "Giving up on writing emissivity after %u attempts", EMISSIVITY_WRITE_ATTEMPTS);
+    this->emissivity_write_failed_ = true;
+  }
 }
 
 bool MLX90614Component::write_emissivity_() {
-  if (std::isnan(this->emissivity_))
+  // Skip the write when the EEPROM already holds the desired value to save write cycles
+  uint16_t current_emissivity;
+  if (this->read_register_(MLX90614_EMISSIVITY, current_emissivity) != i2c::ERROR_OK) {
+    return false;
+  }
+
+  const auto desired_emissivity = static_cast<uint16_t>(this->emissivity_ * 0xFFFF);
+  if (current_emissivity == desired_emissivity) {
     return true;
-  uint16_t value = (uint16_t) (this->emissivity_ * 65535);
-  if (!this->write_bytes_(MLX90614_EMISSIVITY, 0)) {
-    return false;
   }
-  delay(10);
-  if (!this->write_bytes_(MLX90614_EMISSIVITY, value)) {
-    return false;
-  }
-  delay(10);
-  return true;
+
+  return this->write_register_(MLX90614_EMISSIVITY, desired_emissivity);
 }
 
-bool MLX90614Component::write_bytes_(uint8_t reg, uint16_t data) {
+bool MLX90614Component::write_register_(uint8_t reg, uint16_t data) {
+  // The PEC covers the whole write transaction: SLA+W, command, data low, data high
   uint8_t buf[5];
   buf[0] = this->address_ << 1;
   buf[1] = reg;
-  buf[2] = data & 0xFF;
-  buf[3] = data >> 8;
-  buf[4] = crc8(buf, 4, 0x00, 0x07, true);
-  return this->write_bytes(reg, buf + 2, 3);
+
+  // See datasheet 8.3.3.1 EEPROM write sequence
+  // 1. Write 0x0000 into the cell of interest (erases the cell)
+  buf[2] = buf[3] = 0;
+  buf[4] = crc8_pec(buf, 4);
+  auto ec = this->write_register(reg, buf + 2, 3);
+  if (ec != i2c::ERROR_OK) {
+    ESP_LOGW(TAG, "Can't erase register 0x%02X, error %d", reg, ec);
+    return false;
+  }
+
+  // 2. Wait at least 5ms
+  delay(10);
+
+  // 3. Write the new value
+  if (data != 0) {
+    buf[2] = data & 0xFF;
+    buf[3] = data >> 8;
+    buf[4] = crc8_pec(buf, 4);
+    ec = this->write_register(reg, buf + 2, 3);
+    if (ec != i2c::ERROR_OK) {
+      ESP_LOGW(TAG, "Can't write register 0x%02X, error %d", reg, ec);
+      return false;
+    }
+    // 4. Wait at least 5ms
+    delay(10);
+  }
+
+  // 5. Read back to confirm the value was stored
+  uint16_t read_back;
+  ec = this->read_register_(reg, read_back);
+  if (ec != i2c::ERROR_OK) {
+    ESP_LOGW(TAG, "Can't check register 0x%02X value, error %d", reg, ec);
+    return false;
+  }
+
+  if (read_back != data) {
+    ESP_LOGW(TAG, "Read back mismatch on register 0x%02X. Expected 0x%04X, got 0x%04X", reg, data, read_back);
+    return false;
+  }
+
+  return true;
+}
+
+i2c::ErrorCode MLX90614Component::read_register_(uint8_t reg, uint16_t &data) {
+  // The PEC covers the whole read transaction: SLA+W, command, SLA+R, data low, data high
+  uint8_t buf[6];
+  buf[0] = this->address_ << 1;
+  buf[1] = reg;
+  buf[2] = (this->address_ << 1) | 0x01;
+
+  const auto ec = this->read_register(reg, buf + 3, 3);
+  if (ec != i2c::ERROR_OK) {
+    ESP_LOGW(TAG, "i2c read error %d", ec);
+    return ec;
+  }
+
+  const auto expected_pec = crc8_pec(buf, 5);
+  if (buf[5] != expected_pec) {
+    ESP_LOGW(TAG, "i2c CRC error. Expected 0x%02X, got 0x%02X", expected_pec, buf[5]);
+    return i2c::ERROR_CRC;
+  }
+
+  data = encode_uint16(buf[4], buf[3]);
+  return i2c::ERROR_OK;
 }
 
 void MLX90614Component::dump_config() {
   ESP_LOGCONFIG(TAG, "MLX90614:");
   LOG_I2C_DEVICE(this);
-  if (this->is_failed()) {
-    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
+  if (this->emissivity_write_attempts_ != 0) {
+    ESP_LOGW(TAG, "  Emissivity not written yet, will retry");
   }
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Ambient", this->ambient_sensor_);
@@ -71,33 +156,41 @@ void MLX90614Component::dump_config() {
 }
 
 void MLX90614Component::update() {
-  uint8_t emissivity[3];
-  if (this->read_register(MLX90614_EMISSIVITY, emissivity, 3) != i2c::ERROR_OK) {
-    this->status_set_warning();
-    return;
+  // Temperature reads run regardless of the emissivity state so a failure still shows up as NAN
+  this->try_write_emissivity_();
+
+  // Publishes NAN on a bus or CRC failure so a stuck reading is visible instead of silently stale
+  auto publish_sensor = [this](sensor::Sensor *sensor, uint8_t reg) {
+    if (sensor == nullptr) {
+      return i2c::ERROR_OK;
+    }
+
+    uint16_t raw;
+    const auto ec = this->read_register_(reg, raw);
+    if (ec != i2c::ERROR_OK) {
+      sensor->publish_state(NAN);
+      return ec;
+    }
+
+    // Bit 15 set means the device flagged the reading as invalid
+    const float temperature = (raw & 0x8000) ? NAN : raw * 0.02f - 273.15f;
+    ESP_LOGD(TAG, "'%s': Got temperature=%.1f°C", sensor->get_name().c_str(), temperature);
+    sensor->publish_state(temperature);
+    return ec;
+  };
+
+  const auto object_ec = publish_sensor(this->object_sensor_, MLX90614_TEMPERATURE_OBJECT_1);
+  const auto ambient_ec = publish_sensor(this->ambient_sensor_, MLX90614_TEMPERATURE_AMBIENT);
+
+  if (object_ec != i2c::ERROR_OK || ambient_ec != i2c::ERROR_OK) {
+    this->status_set_warning(LOG_STR("Failed to read some sensors"));
+  } else if (this->emissivity_write_failed_) {
+    this->status_set_warning(LOG_STR("Failed to write emissivity"));
+  } else if (this->emissivity_write_attempts_ != 0) {
+    this->status_set_warning(LOG_STR("Failed to write emissivity, will retry"));
+  } else {
+    this->status_clear_warning();
   }
-  uint8_t raw_object[3];
-  if (this->read_register(MLX90614_TEMPERATURE_OBJECT_1, raw_object, 3) != i2c::ERROR_OK) {
-    this->status_set_warning();
-    return;
-  }
-
-  uint8_t raw_ambient[3];
-  if (this->read_register(MLX90614_TEMPERATURE_AMBIENT, raw_ambient, 3) != i2c::ERROR_OK) {
-    this->status_set_warning();
-    return;
-  }
-
-  float ambient = raw_ambient[1] & 0x80 ? NAN : encode_uint16(raw_ambient[1], raw_ambient[0]) * 0.02f - 273.15f;
-  float object = raw_object[1] & 0x80 ? NAN : encode_uint16(raw_object[1], raw_object[0]) * 0.02f - 273.15f;
-
-  ESP_LOGD(TAG, "Got Temperature=%.1f°C Ambient=%.1f°C", object, ambient);
-
-  if (this->ambient_sensor_ != nullptr && !std::isnan(ambient))
-    this->ambient_sensor_->publish_state(ambient);
-  if (this->object_sensor_ != nullptr && !std::isnan(object))
-    this->object_sensor_->publish_state(object);
-  this->status_clear_warning();
 }
 
 }  // namespace esphome::mlx90614

esphome/components/mlx90614/mlx90614.h

@@ -18,13 +18,18 @@ class MLX90614Component final : public PollingComponent, public i2c::I2CDevice {
   void set_emissivity(float emissivity) { emissivity_ = emissivity; }
 
  protected:
+  void try_write_emissivity_();
   bool write_emissivity_();
 
-  bool write_bytes_(uint8_t reg, uint16_t data);
+  bool write_register_(uint8_t reg, uint16_t data);
+  i2c::ErrorCode read_register_(uint8_t reg, uint16_t &data);
 
   sensor::Sensor *ambient_sensor_{nullptr};
   sensor::Sensor *object_sensor_{nullptr};
 
   float emissivity_{NAN};
+  // Remaining attempts to program the emissivity EEPROM cell, bounded to limit cell wear
+  uint8_t emissivity_write_attempts_{0};
+  bool emissivity_write_failed_{false};
 };
 }  // namespace esphome::mlx90614

esphome/components/network/util.h

@@ -26,30 +26,34 @@ namespace esphome::network {
 
 /// Return whether the node is connected to the network (through wifi, eth, ...)
 ESPHOME_ALWAYS_INLINE inline bool is_connected() {
+  // With a single interface enabled the checks below collapse to `if (x) return true; return false;`, which
+  // clang-tidy wants folded into one return. Keep the per-interface form so every enabled interface is checked.
+  // NOLINTBEGIN(readability-simplify-boolean-expr)
 #ifdef USE_ETHERNET
   if (ethernet::global_eth_component != nullptr && ethernet::global_eth_component->is_connected())
     return true;
 #endif
 
 #ifdef USE_MODEM
-  if (modem::global_modem_component != nullptr)
-    return modem::global_modem_component->is_connected();
+  if (modem::global_modem_component != nullptr && modem::global_modem_component->is_connected())
+    return true;
 #endif
 
 #ifdef USE_WIFI
-  if (wifi::global_wifi_component != nullptr)
-    return wifi::global_wifi_component->is_connected();
+  if (wifi::global_wifi_component != nullptr && wifi::global_wifi_component->is_connected())
+    return true;
 #endif
 
 #ifdef USE_OPENTHREAD
-  if (openthread::global_openthread_component != nullptr)
-    return openthread::global_openthread_component->is_connected();
+  if (openthread::global_openthread_component != nullptr && openthread::global_openthread_component->is_connected())
+    return true;
 #endif
 
 #ifdef USE_HOST
   return true;  // Assume it's connected
 #endif
   return false;
+  // NOLINTEND(readability-simplify-boolean-expr)
 }
 
 /// Return whether the network is disabled: every configured interface with a

esphome/components/nextion/display.py

@@ -14,12 +14,7 @@ from esphome.const import (
 )
 from esphome.core import CORE, TimePeriod
 
-from . import (  # noqa: F401  pylint: disable=unused-import
-    FILTER_SOURCE_FILES,
-    Nextion,
-    nextion_ns,
-    nextion_ref,
-)
+from . import FILTER_SOURCE_FILES, Nextion, nextion_ns, nextion_ref  # noqa: F401  pylint: disable=unused-import
 from .base_component import (
     CONF_AUTO_WAKE_ON_TOUCH,
     CONF_COMMAND_SPACING,

esphome/components/radio_frequency/radio_frequency.cpp

@@ -52,14 +52,15 @@ RadioFrequencyCall &RadioFrequencyCall::set_repeat_count(uint32_t count) {
   return *this;
 }
 
-void RadioFrequencyCall::perform() {
-  if (this->parent_ != nullptr) {
-    // Fire any on_control hooks (user-wired automations) before handing off to
-    // the platform-specific control() — gives users a chance to react to call
-    // parameters (e.g. retune an external RF front-end based on call.get_frequency()).
-    this->parent_->control_callback_.call(*this);
-    this->parent_->control(*this);
+bool RadioFrequencyCall::perform() {
+  if (this->parent_ == nullptr) {
+    return false;
   }
+  // Fire any on_control hooks (user-wired automations) before handing off to
+  // the platform-specific control() — gives users a chance to react to call
+  // parameters (e.g. retune an external RF front-end based on call.get_frequency()).
+  this->parent_->control_callback_.call(*this);
+  return this->parent_->control(*this);
 }
 
 // ========== RadioFrequency ==========
@@ -108,4 +109,11 @@ bool RadioFrequency::on_receive(remote_base::RemoteReceiveData data) {
   return false;  // Don't consume the event, allow other listeners to process it
 }
 
+void RadioFrequency::notify_transmit_complete_() {
+#if defined(USE_API) && defined(USE_RADIO_FREQUENCY)
+  if (api::global_api_server != nullptr)
+    api::global_api_server->send_infrared_rf_transmit_complete(*this);
+#endif
+}
+
 }  // namespace esphome::radio_frequency

esphome/components/radio_frequency/radio_frequency.h

@@ -64,8 +64,8 @@ class RadioFrequencyCall {
   /// Set the number of times to repeat transmission (1 = transmit once, 2 = transmit twice, etc.)
   RadioFrequencyCall &set_repeat_count(uint32_t count);
 
-  /// Perform the transmission
-  void perform();
+  /// Perform the transmission; returns true if a frame was handed to the transmitter
+  bool perform();
 
   /// Get the frequency in Hz
   const optional<uint32_t> &get_frequency() const { return this->frequency_hz_; }
@@ -184,7 +184,11 @@ class RadioFrequency : public Component, public EntityBase, public remote_base::
 
   /// Perform the actual transmission (called by RadioFrequencyCall::perform())
   /// Platforms must override this to implement hardware-specific transmission.
-  virtual void control(const RadioFrequencyCall &call) = 0;
+  /// Returns false if nothing was transmitted.
+  virtual bool control(const RadioFrequencyCall &call) = 0;
+  /// Forwards the transmitter's completion to the API server; platforms hook their transmitter to it
+  void notify_transmit_complete_();
+  uint32_t inflight_seq_{0};  // seq of the frame this entity submitted last
 
   // Traits describing capabilities
   RadioFrequencyTraits traits_;

esphome/components/remote_base/remote_base.cpp

@@ -163,7 +163,7 @@ bool RemoteTransmitData::set_data_from_base64url(const std::string &base64url) {
 
 /* RemoteTransmitterBase */
 
-void RemoteTransmitterBase::send_(uint32_t send_times, uint32_t send_wait) {
+void RemoteTransmitterBase::send_(uint32_t send_times, uint32_t send_wait, uint32_t seq) {
 #ifdef ESPHOME_LOG_HAS_VERY_VERBOSE
   const auto &vec = this->temp_.get_data();
   char buffer[256];
@@ -195,6 +195,7 @@ void RemoteTransmitterBase::send_(uint32_t send_times, uint32_t send_wait) {
     ESP_LOGVV(TAG, "%s", buffer);
   }
 #endif
+  this->current_seq_ = seq;
   this->send_internal(send_times, send_wait);
 }
 }  // namespace esphome::remote_base

esphome/components/remote_base/remote_base.h

@@ -146,21 +146,24 @@ class RemoteTransmitterBase : public RemoteComponentBase {
   RemoteTransmitterBase(InternalGPIOPin *pin) : RemoteComponentBase(pin) {}
   class TransmitCall {
    public:
-    explicit TransmitCall(RemoteTransmitterBase *parent) : parent_(parent) {}
+    TransmitCall(RemoteTransmitterBase *parent, uint32_t seq) : parent_(parent), seq_(seq) {}
     RemoteTransmitData *get_data() { return &this->parent_->temp_; }
     void set_send_times(uint32_t send_times) { send_times_ = send_times; }
     void set_send_wait(uint32_t send_wait) { send_wait_ = send_wait; }
-    void perform() { this->parent_->send_(this->send_times_, this->send_wait_); }
+    /// Identifies this transmission in the completion callback
+    uint32_t get_seq() const { return this->seq_; }
+    void perform() { this->parent_->send_(this->send_times_, this->send_wait_, this->seq_); }
 
    protected:
     RemoteTransmitterBase *parent_;
     uint32_t send_times_{1};
     uint32_t send_wait_{0};
+    uint32_t seq_;
   };
 
   TransmitCall transmit() {
     this->temp_.reset();
-    return TransmitCall(this);
+    return TransmitCall(this, ++this->next_seq_);
   }
   template<typename Protocol>
   void transmit(const Protocol::ProtocolData &data, uint32_t send_times = 1, uint32_t send_wait = 0) {
@@ -170,11 +173,32 @@ class RemoteTransmitterBase : public RemoteComponentBase {
     call.set_send_wait(send_wait);
     call.perform();
   }
+#if defined(USE_IR_RF) || defined(USE_RADIO_FREQUENCY)
+  /// Called with the TransmitCall's seq once that transmission has finished, after the last
+  /// repeat and before the on_complete trigger. One slot: a transmitter is driven by a single
+  /// infrared or radio_frequency entity.
+  template<typename F> void set_on_complete_callback(F &&callback) {
+    this->complete_callback_ = Callback<void(uint32_t)>::create(std::forward<F>(callback));
+  }
+#endif
 
  protected:
-  void send_(uint32_t send_times, uint32_t send_wait);
+  void send_(uint32_t send_times, uint32_t send_wait, uint32_t seq);
   virtual void send_internal(uint32_t send_times, uint32_t send_wait) = 0;
-  void send_single_() { this->send_(1, 0); }
+  void send_single_() { this->send_(1, 0, ++this->next_seq_); }
+#if defined(USE_IR_RF) || defined(USE_RADIO_FREQUENCY)
+  void notify_complete_(uint32_t seq) {
+    if (this->complete_callback_.fn_ != nullptr)
+      this->complete_callback_.call(seq);
+  }
+
+  Callback<void(uint32_t)> complete_callback_{};
+#else
+  void notify_complete_(uint32_t seq) {}
+#endif
+  // seq handed to the platform by send_(); platforms copy it when they accept the frame
+  uint32_t next_seq_{0};
+  uint32_t current_seq_{0};
 
   /// Use same vector for all transmits, avoids many allocations
   RemoteTransmitData temp_;

esphome/components/remote_transmitter/remote_transmitter.cpp

@@ -80,6 +80,7 @@ void RemoteTransmitterComponent::digital_write(bool value) { this->pin_->digital
 
 void RemoteTransmitterComponent::send_internal(uint32_t send_times, uint32_t send_wait) {
   ESP_LOGD(TAG, "Sending remote code");
+  this->inflight_seq_ = this->current_seq_;
   uint32_t on_time, off_time;
   this->calculate_on_off_time_(this->temp_.get_carrier_frequency(), &on_time, &off_time);
   this->transmit_trigger_.trigger();
@@ -114,7 +115,7 @@ void RemoteTransmitterComponent::send_internal(uint32_t send_times, uint32_t sen
       }
     }
   }
-  this->complete_trigger_.trigger();
+  this->fire_complete_();
 }
 
 }  // namespace esphome::remote_transmitter

esphome/components/remote_transmitter/remote_transmitter.h

@@ -82,6 +82,12 @@ class RemoteTransmitterComponent final : public remote_base::RemoteTransmitterBa
 
  protected:
   void send_internal(uint32_t send_times, uint32_t send_wait) override;
+  // completion callbacks run before the user's on_complete automation
+  void fire_complete_() {
+    this->notify_complete_(this->inflight_seq_);
+    this->complete_trigger_.trigger();
+  }
+  uint32_t inflight_seq_{0};  // seq of the frame whose completion is still to be reported
 #if defined(USE_ESP8266) || \
     (defined(USE_LIBRETINY) && !defined(USE_LIBRETINY_VARIANT_RTL8720C) && !defined(REMOTE_TRANSMITTER_BK_PWM)) || \
     defined(USE_RP2) || (defined(USE_ESP32) && !SOC_RMT_SUPPORTED)

esphome/components/remote_transmitter/remote_transmitter_libretiny_isr.cpp

@@ -110,7 +110,7 @@ void RemoteTransmitterComponent::deliver_completion_() {
   if (!this->stall_aborted_)
     this->status_clear_warning();
   this->complete_pending_ = false;
-  this->complete_trigger_.trigger();
+  this->fire_complete_();
 }
 
 // Waits until no chain is in flight, delivering any deferred completions; a completion
@@ -137,6 +137,7 @@ void RemoteTransmitterComponent::wait_until_idle_() {
 
 // Stages the repeat schedule and stall deadline, then starts the interrupt chain
 void RemoteTransmitterComponent::arm_chain_(uint32_t send_times, uint32_t send_wait) {
+  this->inflight_seq_ = this->current_seq_;
   this->isr_repeats_left_ = send_times;
   this->isr_send_wait_ = send_wait;
   this->isr_index_ = 0;

esphome/components/remote_transmitter/remote_transmitter_rmt.cpp

@@ -213,7 +213,7 @@ void RemoteTransmitterComponent::wait_for_rmt_() {
     this->status_set_warning();
   }
 
-  this->complete_trigger_.trigger();
+  this->fire_complete_();
 }
 
 #if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 5, 1)
@@ -228,6 +228,7 @@ void RemoteTransmitterComponent::send_internal(uint32_t send_times, uint32_t sen
   if (this->non_blocking_ && this->cancel_timeout("complete")) {
     this->wait_for_rmt_();
   }
+  this->inflight_seq_ = this->current_seq_;
 
   if (this->current_carrier_frequency_ != this->temp_.get_carrier_frequency()) {
     this->current_carrier_frequency_ = this->temp_.get_carrier_frequency();
@@ -300,6 +301,7 @@ void RemoteTransmitterComponent::send_internal(uint32_t send_times, uint32_t sen
 void RemoteTransmitterComponent::send_internal(uint32_t send_times, uint32_t send_wait) {
   if (this->is_failed())
     return;
+  this->inflight_seq_ = this->current_seq_;
 
   if (this->current_carrier_frequency_ != this->temp_.get_carrier_frequency()) {
     this->current_carrier_frequency_ = this->temp_.get_carrier_frequency();
@@ -364,7 +366,7 @@ void RemoteTransmitterComponent::send_internal(uint32_t send_times, uint32_t sen
     if (i + 1 < send_times)
       delayMicroseconds(send_wait);
   }
-  this->complete_trigger_.trigger();
+  this->fire_complete_();
 }
 #endif
 

esphome/components/remote_transmitter/remote_transmitter_rtl87xx.cpp

@@ -149,6 +149,7 @@ void RemoteTransmitterComponent::send_internal(uint32_t send_times, uint32_t sen
     return;
   }
   ESP_LOGD(TAG, "Sending remote code");
+  this->inflight_seq_ = this->current_seq_;
   const uint32_t carrier_frequency = this->temp_.get_carrier_frequency();
   // unmodulated protocols (no carrier or 100% duty) drive the pin constantly during marks
   float mark_duty =
@@ -194,7 +195,7 @@ void RemoteTransmitterComponent::send_internal(uint32_t send_times, uint32_t sen
       }
     }
   }
-  this->complete_trigger_.trigger();
+  this->fire_complete_();
 }
 
 #endif  // USE_LIBRETINY_VARIANT_RTL8720C

esphome/components/sendspin/__init__.py

@@ -6,12 +6,17 @@ from esphome.components import esp32, network, psram, socket, wifi
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_BUFFER_SIZE,
+    CONF_ESPHOME,
     CONF_FORMAT,
     CONF_HEIGHT,
     CONF_ID,
+    CONF_MODEL,
+    CONF_NAME,
+    CONF_PROJECT,
     CONF_SAMPLE_RATE,
     CONF_SOURCE,
     CONF_TASK_STACK_IN_PSRAM,
+    CONF_VERSION,
     CONF_WIDTH,
 )
 from esphome.core import CORE, ID
@@ -27,6 +32,14 @@ DOMAIN = "sendspin"
 CONF_DISPLAY_OFFSET = "display_offset"
 CONF_SENDSPIN_ID = "sendspin_id"
 
+CONF_FIRMWARE_VERSION = "firmware_version"
+CONF_MANUFACTURER = "manufacturer"
+
+# An empty device information string would be sent to the server as an empty value rather than
+# falling back, so reject it instead of silently substituting the fallback. The 127 byte cap keeps
+# the length prefix of a protobuf string field to a single byte, matching `esphome: project:`.
+DEVICE_INFO_STRING = cv.All(cv.string_strict, cv.Length(min=1), cv.ByteLength(max=127))
+
 CONF_INITIAL_STATIC_DELAY = "initial_static_delay"
 CONF_FIXED_DELAY = "fixed_delay"
 CONF_DECODE_MEMORY = "decode_memory"
@@ -198,6 +211,9 @@ CONFIG_SCHEMA = cv.All(
         {
             cv.GenerateID(): cv.declare_id(SendspinHub),
             cv.Optional(CONF_TASK_STACK_IN_PSRAM): psram.validate_task_stack_in_psram,
+            cv.Optional(CONF_MANUFACTURER): DEVICE_INFO_STRING,
+            cv.Optional(CONF_MODEL): DEVICE_INFO_STRING,
+            cv.Optional(CONF_FIRMWARE_VERSION): DEVICE_INFO_STRING,
         }
     ),
     cv.only_on_esp32,
@@ -248,6 +264,22 @@ async def to_code(config: ConfigType) -> None:
         cg.add(var.set_task_stack_in_psram(True))
         psram.request_external_task_stack()
 
+    # Device information for the server's client/hello message. Falls back to the project
+    # information, which is written as `manufacturer.model`. Anything still unset keeps the
+    # default the hub itself applies: the ESPHome name and version.
+    project = CORE.config[CONF_ESPHOME].get(CONF_PROJECT, {})
+    project_manufacturer, _, project_model = project.get(CONF_NAME, "").partition(".")
+    for value, setter in (
+        (config.get(CONF_MANUFACTURER) or project_manufacturer, var.set_manufacturer),
+        (config.get(CONF_MODEL) or project_model, var.set_model),
+        (
+            config.get(CONF_FIRMWARE_VERSION) or project.get(CONF_VERSION),
+            var.set_firmware_version,
+        ),
+    ):
+        if value:
+            cg.add(setter(value))
+
     # sendspin-cpp library
     esp32.add_idf_component(name="sendspin/sendspin-cpp", ref="0.7.2")
 
@@ -307,7 +339,7 @@ async def to_code(config: ConfigType) -> None:
         player_cfg = data.player_config
         sample_rate = player_cfg[CONF_SAMPLE_RATE]
 
-        codecs = player_cfg[CONF_CODECS]
+        codecs = [CODECS[codec] for codec in player_cfg[CONF_CODECS]]
 
         def _audio_format(codec: MockObj, channels: int) -> cg.StructInitializer:
             return cg.StructInitializer(

esphome/components/sendspin/sendspin_hub.cpp

@@ -76,8 +76,12 @@ void SendspinHub::dump_config() {
   ESP_LOGCONFIG(TAG,
                 "Sendspin Hub:\n"
                 "  Client ID: %s\n"
+                "  Manufacturer: %s\n"
+                "  Model: %s\n"
+                "  Firmware version: %s\n"
                 "  Task stack in PSRAM: %s",
-                get_client_id_into_buffer(mac_buf), YESNO(this->task_stack_in_psram_));
+                get_client_id_into_buffer(mac_buf), this->manufacturer_, this->get_product_name_(),
+                this->firmware_version_, YESNO(this->task_stack_in_psram_));
 
 #ifdef USE_SENDSPIN_ARTWORK
   // Slot indices come from the order the image platform entries were declared, so the log is the
@@ -127,15 +131,19 @@ const char *SendspinHub::get_client_id_into_buffer(std::span<char, MAC_ADDRESS_P
   return get_mac_address_pretty_into_buffer(buf);
 }
 
+const char *SendspinHub::get_product_name_() const {
+  return this->model_ != nullptr ? this->model_ : App.get_name().c_str();
+}
+
 sendspin::SendspinClientConfig SendspinHub::build_client_config_() {
   sendspin::SendspinClientConfig config;
 
   char mac_buf[MAC_ADDRESS_PRETTY_BUFFER_SIZE];
   config.client_id = SendspinHub::get_client_id_into_buffer(mac_buf);
   config.name = App.get_friendly_name();
-  config.product_name = App.get_name();
-  config.manufacturer = "ESPHome";
-  config.software_version = ESPHOME_VERSION;
+  config.product_name = this->get_product_name_();
+  config.manufacturer = this->manufacturer_;
+  config.software_version = this->firmware_version_;
   config.httpd_psram_stack = this->task_stack_in_psram_;
 
   return config;

esphome/components/sendspin/sendspin_hub.h

@@ -8,6 +8,7 @@
 #include "esphome/core/component.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/preferences.h"
+#include "esphome/core/version.h"
 
 #include <sendspin/client.h>
 #include <sendspin/config.h>
@@ -125,6 +126,15 @@ class SendspinHub final : public Component,
 
   void set_task_stack_in_psram(bool task_stack_in_psram) { this->task_stack_in_psram_ = task_stack_in_psram; }
 
+  /// @brief Sets the device information reported to the server in the `client/hello` message.
+  ///
+  /// Each takes a pointer to a string literal emitted by codegen, so it must stay valid for the
+  /// lifetime of the hub. Only called for values the configuration overrides; anything left alone
+  /// keeps the default described on the member below.
+  void set_manufacturer(const char *manufacturer) { this->manufacturer_ = manufacturer; }
+  void set_model(const char *model) { this->model_ = model; }
+  void set_firmware_version(const char *firmware_version) { this->firmware_version_ = firmware_version; }
+
   // --- Sendspin role specific methods ---
 
 #ifdef USE_SENDSPIN_ARTWORK
@@ -187,6 +197,9 @@ class SendspinHub final : public Component,
   /// @brief Builds the SendspinClientConfig from ESPHome configuration and platform info.
   sendspin::SendspinClientConfig build_client_config_();
 
+  /// @brief Returns the product name reported to the server: the configured model, or the device name.
+  const char *get_product_name_() const;
+
   /// @brief Writes the active network interface's MAC into @p buf and returns its data pointer.
   /// Uses the ethernet MAC if ethernet is configured, otherwise the base MAC (used by wifi).
   static const char *get_client_id_into_buffer(std::span<char, MAC_ADDRESS_PRETTY_BUFFER_SIZE> buf);
@@ -268,6 +281,12 @@ class SendspinHub final : public Component,
   CallbackManager<void(const sendspin::GroupUpdateObject &)> group_update_callbacks_{};
 
   bool task_stack_in_psram_{false};
+
+  // Device information sent in the `client/hello` message. Defaults apply when neither the
+  // sendspin configuration nor the project information supplies a value.
+  const char *manufacturer_{"ESPHome"};
+  const char *model_{nullptr};  // nullptr reports the device name instead
+  const char *firmware_version_{ESPHOME_VERSION};
 };
 
 /// @brief Base class for all sendspin subcomponents.

esphome/components/serial_proxy/__init__.py

@@ -30,6 +30,7 @@ MULTI_CONF = True
 
 serial_proxy_ns = cg.esphome_ns.namespace("serial_proxy")
 SerialProxy = serial_proxy_ns.class_("SerialProxy", cg.Component, uart.UARTDevice)
+SerialProxyTap = serial_proxy_ns.class_("SerialProxyTap")
 
 api_enums_ns = cg.esphome_ns.namespace("api").namespace("enums")
 SerialProxyPortType = api_enums_ns.enum("SerialProxyPortType")

esphome/components/serial_proxy/serial_proxy.cpp

@@ -29,26 +29,57 @@ void SerialProxy::setup() {
 #ifdef USE_API
   // instance_index_ is fixed at registration time; pre-set it so loop() only needs to update data
   this->outgoing_msg_.instance = this->instance_index_;
+#endif
+#ifdef USE_SERIAL_PROXY_TAP
+  // A tap sets itself up before this runs (its setup priority is higher), so it may
+  // already be waiting on the port -- a boot-time handshake with the device, say. Leaving
+  // the loop enabled is what lets that finish; without it the tap would stall until a
+  // client happened to subscribe.
+  if (this->tap_ != nullptr && this->tap_->tap_needs_port()) {
+    return;
+  }
 #endif
   // No subscriber at startup; disable loop until a client subscribes
   this->disable_loop();
 }
 
-void SerialProxy::loop() {
-#ifdef USE_API
-  // Safety check — loop should only run when subscribed, but guard against races
-  if (this->api_connection_ == nullptr) [[unlikely]] {
-    this->disable_loop();
+#ifdef USE_SERIAL_PROXY_TAP
+void SerialProxy::reset_mode_() {
+  // The mode belongs to a session, not to the port. Carrying a departed client's choice
+  // over to the next one would inject protocol bytes into a stream that never asked for
+  // them -- a firmware upload, or any client built before this request existed and so
+  // unable to turn it off. Guessing RAW is the safe direction: a client that wanted
+  // protocol handling and did not ask for it merely sends its own acknowledgements.
+  if (this->mode_ == api::enums::SERIAL_PROXY_MODE_RAW) {
     return;
   }
+  ESP_LOGD(TAG, "Session ended, returning serial proxy [%" PRIu32 "] to RAW mode", this->instance_index_);
+  this->mode_ = api::enums::SERIAL_PROXY_MODE_RAW;
+}
+#endif
 
+void SerialProxy::loop() {
+#ifdef USE_API
   // Detect subscriber disconnect
-  if (this->api_connection_->is_marked_for_removal() || !this->api_connection_->is_connection_setup() ||
-      !api_is_connected()) {
+  if (this->api_connection_ != nullptr && (this->api_connection_->is_marked_for_removal() ||
+                                           !this->api_connection_->is_connection_setup() || !api_is_connected())) {
     ESP_LOGW(TAG, "Subscriber disconnected");
     this->api_connection_ = nullptr;
+    this->reset_mode_();
+  }
+
+  // With no subscriber there is normally nothing to do, but a tap may still need the port
+  // read -- it does its protocol work precisely while nobody else is listening.
+  if (this->api_connection_ == nullptr) [[unlikely]] {
+#ifdef USE_SERIAL_PROXY_TAP
+    if (this->tap_ == nullptr || !this->tap_->tap_needs_port()) {
+      this->disable_loop();
+      return;
+    }
+#else
     this->disable_loop();
     return;
+#endif
   }
 
   // Read available data from UART and forward to subscribed client
@@ -69,11 +100,54 @@ void __attribute__((noinline)) SerialProxy::read_and_send_(size_t available) {
   if (!this->read_array(buffer, to_read))
     return;
 
+#ifdef USE_SERIAL_PROXY_TAP
+  // Before forwarding, so a tap that answers the device (an acknowledgement, say) is not
+  // waiting on the network round trip to a subscriber that may not even exist.
+  if (this->tap_observing_()) {
+    this->tap_->on_device_rx(buffer, to_read);
+  }
+#endif
+
+  if (this->api_connection_ == nullptr) {
+    return;
+  }
   this->outgoing_msg_.set_data(buffer, to_read);
   this->api_connection_->send_serial_proxy_data(this->outgoing_msg_);
 }
 #endif
 
+#ifdef USE_SERIAL_PROXY_TAP
+
+bool SerialProxy::tap_observing_() const {
+  if (this->tap_ == nullptr) {
+    return false;
+  }
+  // With no subscriber, a tap doing its own protocol work (the boot-time handshake with
+  // the device, say) is served regardless of mode -- nobody has chosen one yet. Once a
+  // subscriber holds the port, the mode alone decides, so RAW stays inert.
+  if (this->api_connection_ == nullptr && this->tap_->tap_needs_port()) {
+    return true;
+  }
+  // Otherwise the mode decides. RAW must be inert: a client that flips to RAW before
+  // flashing firmware is entitled to a byte pipe with nothing injecting protocol bytes
+  // into it, and "the tap turned out not to recognise the stream" is not good enough.
+  return this->mode_ == api::enums::SERIAL_PROXY_MODE_PROTOCOL;
+}
+
+void SerialProxy::tap_pump() {
+#ifdef USE_API
+  // Nothing would consume the bytes; leave them in the FIFO
+  if (!this->tap_observing_() && this->api_connection_ == nullptr) {
+    return;
+  }
+  const size_t available = this->available();
+  if (available > 0) {
+    this->read_and_send_(available);
+  }
+#endif
+}
+#endif
+
 void SerialProxy::dump_config() {
   ESP_LOGCONFIG(TAG,
                 "Serial Proxy [%" PRIu32 "]:\n"
@@ -92,8 +166,9 @@ void SerialProxy::dump_config() {
 SerialProxyResult SerialProxy::configure(api::APIConnection *api_connection, uint32_t baudrate, bool flow_control,
                                          uint8_t parity, uint8_t stop_bits, uint8_t data_size) {
 #ifdef USE_API
-  if (this->port_claimed_by_other_(api_connection)) {
-    ESP_LOGW(TAG, "Ignoring configure request from client without port access [%" PRIu32 "]", this->instance_index_);
+  if (!this->is_subscriber_(api_connection)) {
+    ESP_LOGW(TAG, "Ignoring configure request from client without port subscription [%" PRIu32 "]",
+             this->instance_index_);
     return SerialProxyResult::SERIAL_PROXY_RESULT_PORT_IN_USE;
   }
 #endif
@@ -159,24 +234,80 @@ SerialProxyResult SerialProxy::configure(api::APIConnection *api_connection, uin
   return SerialProxyResult::SERIAL_PROXY_RESULT_OK;
 }
 
+SerialProxyResult SerialProxy::set_mode_from_client(api::APIConnection *api_connection,
+                                                    api::enums::SerialProxyMode mode) {
+#ifdef USE_API
+  // Only the live subscriber may change the mode, so the mode cannot outlive a session
+  if (!this->is_subscriber_(api_connection)) {
+    ESP_LOGW(TAG, "Ignoring mode request from client without port subscription [%" PRIu32 "]", this->instance_index_);
+    return SerialProxyResult::SERIAL_PROXY_RESULT_PORT_IN_USE;
+  }
+#endif
+  // Values come from a remote client
+  if (mode != api::enums::SERIAL_PROXY_MODE_RAW && mode != api::enums::SERIAL_PROXY_MODE_PROTOCOL) {
+    ESP_LOGW(TAG, "Invalid mode: %" PRIu32, static_cast<uint32_t>(mode));
+    return SerialProxyResult::SERIAL_PROXY_RESULT_INVALID_ARGUMENT;
+  }
+  // PROTOCOL on a port with no tap would be a silent no-op; refuse so the client knows
+#ifdef USE_SERIAL_PROXY_TAP
+  const bool has_tap = this->tap_ != nullptr;
+#else
+  const bool has_tap = false;
+#endif
+  if (mode == api::enums::SERIAL_PROXY_MODE_PROTOCOL && !has_tap) {
+    ESP_LOGW(TAG, "No tap on serial proxy [%" PRIu32 "]; PROTOCOL mode unavailable", this->instance_index_);
+    return SerialProxyResult::SERIAL_PROXY_RESULT_NOT_SUPPORTED;
+  }
+  ESP_LOGD(TAG, "Serial proxy [%" PRIu32 "] mode set to %s", this->instance_index_,
+           mode == api::enums::SERIAL_PROXY_MODE_PROTOCOL ? LOG_STR_LITERAL("PROTOCOL") : LOG_STR_LITERAL("RAW"));
+#ifdef USE_SERIAL_PROXY_TAP
+  const bool leaving_protocol_mode =
+      this->mode_ != api::enums::SERIAL_PROXY_MODE_RAW && mode == api::enums::SERIAL_PROXY_MODE_RAW;
+  this->mode_ = mode;
+
+  // Only for an explicit client request, not for reset_mode_() at the end of a session:
+  // an ordinary disconnect says nothing about the device, whereas a client deliberately
+  // asking for raw bytes usually precedes changing what the device is.
+  if (leaving_protocol_mode && this->tap_ != nullptr) {
+    this->tap_->on_protocol_disabled();
+  }
+#endif
+  return SerialProxyResult::SERIAL_PROXY_RESULT_OK;
+}
+
 void SerialProxy::write_from_client(api::APIConnection *api_connection, const uint8_t *data, size_t len) {
 #ifdef USE_API
-  // Bytes from a client other than the live subscriber would interleave with the
-  // subscriber's traffic on the wire
-  if (this->port_claimed_by_other_(api_connection)) {
-    ESP_LOGW(TAG, "Ignoring write from client without port access [%" PRIu32 "]", this->instance_index_);
+  // Bytes from anyone but the live subscriber would interleave with the subscriber's
+  // traffic -- or with an active tap's -- on the wire
+  if (!this->is_subscriber_(api_connection)) {
+    if (this->api_connection_ != nullptr) {
+      ESP_LOGW(TAG, "Ignoring write from client that does not hold serial proxy [%" PRIu32 "]", this->instance_index_);
+    } else {
+      // A legacy client streaming writes without subscribing would flood WARN, one per
+      // request; writes are the only high-rate, unacknowledged operation, so keep this
+      // visible without drowning the log
+      ESP_LOGV(TAG, "Ignoring write from client without port subscription [%" PRIu32 "]", this->instance_index_);
+    }
     return;
   }
 #endif
   if (data == nullptr || len == 0)
     return;
   this->write_array(data, len);
+
+#ifdef USE_SERIAL_PROXY_TAP
+  // After the write, so the tap observes the same ordering the device does
+  if (this->tap_observing_()) {
+    this->tap_->on_client_tx(data, len);
+  }
+#endif
 }
 
 SerialProxyResult SerialProxy::set_modem_pins(api::APIConnection *api_connection, uint32_t line_states) {
 #ifdef USE_API
-  if (this->port_claimed_by_other_(api_connection)) {
-    ESP_LOGW(TAG, "Ignoring modem pin request from client without port access [%" PRIu32 "]", this->instance_index_);
+  if (!this->is_subscriber_(api_connection)) {
+    ESP_LOGW(TAG, "Ignoring modem pin request from client without port subscription [%" PRIu32 "]",
+             this->instance_index_);
     return SerialProxyResult::SERIAL_PROXY_RESULT_PORT_IN_USE;
   }
 #endif
@@ -210,8 +341,8 @@ uint32_t SerialProxy::get_modem_pins() const {
 SerialProxyResult SerialProxy::flush_port(api::APIConnection *api_connection) {
 #ifdef USE_API
   // Flushing stalls the port, so it gets the same ownership check as writes
-  if (this->port_claimed_by_other_(api_connection)) {
-    ESP_LOGW(TAG, "Ignoring flush from client without port access [%" PRIu32 "]", this->instance_index_);
+  if (!this->is_subscriber_(api_connection)) {
+    ESP_LOGW(TAG, "Ignoring flush from client without port subscription [%" PRIu32 "]", this->instance_index_);
     return SerialProxyResult::SERIAL_PROXY_RESULT_PORT_IN_USE;
   }
 #endif
@@ -230,11 +361,6 @@ SerialProxyResult SerialProxy::flush_port(api::APIConnection *api_connection) {
 }
 
 #ifdef USE_API
-bool SerialProxy::port_claimed_by_other_(api::APIConnection *api_connection) const {
-  return this->api_connection_ != nullptr && this->api_connection_ != api_connection &&
-         this->api_connection_->is_connection_setup();
-}
-
 SerialProxyResult SerialProxy::serial_proxy_request(api::APIConnection *api_connection,
                                                     api::enums::SerialProxyRequestType type) {
   switch (type) {
@@ -252,6 +378,10 @@ SerialProxyResult SerialProxy::serial_proxy_request(api::APIConnection *api_conn
           return SerialProxyResult::SERIAL_PROXY_RESULT_PORT_IN_USE;
         }
         ESP_LOGW(TAG, "Previous subscriber disconnected; taking over subscription");
+        // End the dead client's session before starting the new one, so its mode
+        // cannot leak into a session that never asked for it
+        this->api_connection_ = nullptr;
+        this->reset_mode_();
       }
       this->api_connection_ = api_connection;
       this->enable_loop();
@@ -264,7 +394,15 @@ SerialProxyResult SerialProxy::serial_proxy_request(api::APIConnection *api_conn
         return SerialProxyResult::SERIAL_PROXY_RESULT_OK;
       }
       this->api_connection_ = nullptr;
+      this->reset_mode_();
+#ifdef USE_SERIAL_PROXY_TAP
+      // Keep the loop alive for a tap that still needs the port (mirrors loop())
+      if (this->tap_ == nullptr || !this->tap_->tap_needs_port()) {
+        this->disable_loop();
+      }
+#else
       this->disable_loop();
+#endif
       ESP_LOGV(TAG, "API connection unsubscribed from serial proxy [%" PRIu32 "]", this->instance_index_);
       return SerialProxyResult::SERIAL_PROXY_RESULT_OK;
     default:

esphome/components/serial_proxy/serial_proxy.h

@@ -26,6 +26,7 @@ class APIConnection;
 namespace enums {
 enum SerialProxyPortType : uint32_t;
 enum SerialProxyRequestType : uint32_t;
+enum SerialProxyMode : uint32_t;
 }  // namespace enums
 }  // namespace esphome::api
 
@@ -52,6 +53,36 @@ enum class SerialProxyResult : uint8_t {
 /// Maximum bytes to read from UART in a single loop iteration
 inline constexpr size_t SERIAL_PROXY_MAX_READ_SIZE = 256;
 
+#ifdef USE_SERIAL_PROXY_TAP
+/// Observes a port's traffic without owning it, and may inject bytes of its own.
+///
+/// This exists so protocol-aware behaviour can be layered onto a plain byte pipe without
+/// the pipe knowing anything about the protocol: the tap is compiled in only when some
+/// component asks for one, so a proxy carrying an RS485 meter pays nothing for it.
+///
+/// A tap is an observer, never a gatekeeper -- it cannot suppress or alter the bytes
+/// flowing in either direction, so a misbehaving tap cannot corrupt the stream.
+class SerialProxyTap {
+ public:
+  /// Bytes read from the device, before they are forwarded to any subscriber.
+  virtual void on_device_rx(const uint8_t *data, size_t len) = 0;
+
+  /// Bytes a subscriber sent towards the device, after they have been written.
+  virtual void on_client_tx(const uint8_t *data, size_t len) = 0;
+
+  /// True when the port must keep reading even with no subscriber attached, so a tap can
+  /// do its own protocol work while nobody is listening. Honoured only while no
+  /// subscriber holds the port; with one attached, the port mode alone decides.
+  virtual bool tap_needs_port() const = 0;
+
+  /// A client explicitly turned protocol handling off for this port. Distinct from the
+  /// automatic reset when a session ends: this one means a client intends to do something
+  /// else with the device -- reflash it, most likely -- so anything the tap believes about
+  /// it should be treated as suspect.
+  virtual void on_protocol_disabled() = 0;
+};
+#endif
+
 class SerialProxy final : public uart::UARTDevice, public Component {
  public:
   void setup() override;
@@ -77,6 +108,9 @@ class SerialProxy final : public uart::UARTDevice, public Component {
   /// Get the port type
   api::enums::SerialProxyPortType get_port_type() const { return this->port_type_; }
 
+  /// Handle a mode change requested by an API client
+  SerialProxyResult set_mode_from_client(api::APIConnection *api_connection, api::enums::SerialProxyMode mode);
+
   /// Configure UART parameters and apply them
   /// @param api_connection The API connection requesting the change
   /// @param baudrate Baud rate in bits per second
@@ -121,13 +155,67 @@ class SerialProxy final : public uart::UARTDevice, public Component {
   /// Set the DTR GPIO pin (from YAML configuration)
   void set_dtr_pin(GPIOPin *pin) { this->dtr_pin_ = pin; }
 
+#ifdef USE_SERIAL_PROXY_TAP
+  /// Attach a traffic observer. At most one, set once at setup time.
+  void set_tap(SerialProxyTap *tap) { this->tap_ = tap; }
+
+  /// Write bytes originating from the tap rather than from a client. Bypasses the
+  /// subscriber ownership check, but only while the tap is being served bytes -- so a
+  /// port in RAW mode with a subscriber attached stays inert. Returns false when the
+  /// bytes were dropped for that reason.
+  bool write_from_tap(const uint8_t *data, size_t len) {
+    if (!this->tap_observing_()) {
+      return false;
+    }
+    this->write_array(data, len);
+    return true;
+  }
+
+  /// Whether the tap is currently being served bytes. Can flip false with no callback
+  /// (a subscriber attaching in RAW mode, say), so a tap should check before starting
+  /// protocol work and when a reply seems overdue.
+  bool tap_is_observed() const { return this->tap_observing_(); }
+
+  /// Resume reading after a tap's needs change. loop() disables itself when there is
+  /// neither a subscriber nor a tap that wants the port, so a tap starting fresh work
+  /// must ask for it back. Must be called from the main loop.
+  void tap_request_port() { this->enable_loop(); }
+
+  /// Whether the underlying device is present. On a USB UART this tracks enumeration, so
+  /// a tap can notice the device being unplugged and plugged back in.
+  bool is_device_connected() const { return this->parent_->is_connected(); }
+
+  /// Run one read-and-dispatch cycle immediately. Lets a tap make progress before the
+  /// main loop is running -- during setup, for instance, while a component is still
+  /// blocking on can_proceed(). Must not be called from on_device_rx() or
+  /// on_client_tx(): each nested cycle costs a 256-byte stack frame.
+  void tap_pump();
+#endif
+
  protected:
 #ifdef USE_API
-  /// Read from UART and send to API client (slow path with 256-byte stack buffer)
+  /// Read from UART, hand the bytes to any tap, and forward them to a subscriber
+  /// (slow path with a 256-byte stack buffer)
   void read_and_send_(size_t available);
 
-  /// True when a live subscriber other than the given connection holds the port
-  bool port_claimed_by_other_(api::APIConnection *api_connection) const;
+  /// True when the given connection is the live subscriber. Every port operation
+  /// (write, configure, modem pins, flush, mode) requires this, so an unsubscribed
+  /// client can never share the wire with the subscriber or an active tap.
+  bool is_subscriber_(api::APIConnection *api_connection) const { return this->api_connection_ == api_connection; }
+#endif
+
+#ifdef USE_SERIAL_PROXY_TAP
+  /// Return the port to RAW when a subscriber goes away, so the mode never outlives it
+  void reset_mode_();
+#else
+  /// Without a tap, PROTOCOL is refused, so the mode is fixed at RAW and there is
+  /// nothing to reset
+  void reset_mode_() {}
+#endif
+
+#ifdef USE_SERIAL_PROXY_TAP
+  /// True when the tap should be shown the traffic passing through this port
+  bool tap_observing_() const;
 #endif
 
   /// Instance index for identifying this proxy in API messages
@@ -147,6 +235,11 @@ class SerialProxy final : public uart::UARTDevice, public Component {
   /// Port type
   api::enums::SerialProxyPortType port_type_{};
 
+#ifdef USE_SERIAL_PROXY_TAP
+  /// How the bytes passing through are treated; zero is SERIAL_PROXY_MODE_RAW
+  api::enums::SerialProxyMode mode_{};
+#endif
+
   /// Optional GPIO pins for modem control
   GPIOPin *rts_pin_{nullptr};
   GPIOPin *dtr_pin_{nullptr};
@@ -154,6 +247,10 @@ class SerialProxy final : public uart::UARTDevice, public Component {
   /// Current modem pin states
   bool rts_state_{false};
   bool dtr_state_{false};
+
+#ifdef USE_SERIAL_PROXY_TAP
+  SerialProxyTap *tap_{nullptr};
+#endif
 };
 
 }  // namespace esphome::serial_proxy

esphome/components/template/binary_sensor/__init__.py

@@ -2,7 +2,13 @@ from esphome import automation
 import esphome.codegen as cg
 from esphome.components import binary_sensor
 import esphome.config_validation as cv
-from esphome.const import CONF_CONDITION, CONF_ID, CONF_LAMBDA, CONF_STATE
+from esphome.const import (
+    CONF_CONDITION,
+    CONF_DEVICE_CLASS,
+    CONF_ID,
+    CONF_LAMBDA,
+    CONF_STATE,
+)
 from esphome.cpp_generator import LambdaExpression
 
 from .. import template_ns
@@ -12,7 +18,11 @@ TemplateBinarySensor = template_ns.class_(
 )
 
 CONFIG_SCHEMA = (
-    binary_sensor.binary_sensor_schema(TemplateBinarySensor)
+    cv.with_visibility(
+        binary_sensor.binary_sensor_schema(TemplateBinarySensor),
+        cv.Visibility.UI,
+        CONF_DEVICE_CLASS,
+    )
     .extend(
         {
             cv.Exclusive(CONF_LAMBDA, CONF_CONDITION): cv.returning_lambda,

esphome/components/template/button/__init__.py

@@ -1,10 +1,14 @@
 from esphome.components import button
+import esphome.config_validation as cv
+from esphome.const import CONF_DEVICE_CLASS
 
 from .. import template_ns
 
 TemplateButton = template_ns.class_("TemplateButton", button.Button)
 
-CONFIG_SCHEMA = button.button_schema(TemplateButton)
+CONFIG_SCHEMA = cv.with_visibility(
+    button.button_schema(TemplateButton), cv.Visibility.UI, CONF_DEVICE_CLASS
+)
 
 
 async def to_code(config):

esphome/components/template/cover/__init__.py

@@ -6,6 +6,7 @@ from esphome.const import (
     CONF_ASSUMED_STATE,
     CONF_CLOSE_ACTION,
     CONF_CURRENT_OPERATION,
+    CONF_DEVICE_CLASS,
     CONF_ID,
     CONF_LAMBDA,
     CONF_OPEN_ACTION,
@@ -38,7 +39,11 @@ CONF_HAS_POSITION = "has_position"
 CONF_TOGGLE_ACTION = "toggle_action"
 
 CONFIG_SCHEMA = (
-    cover.cover_schema(TemplateCover)
+    cv.with_visibility(
+        cover.cover_schema(TemplateCover),
+        cv.Visibility.UI,
+        CONF_DEVICE_CLASS,
+    )
     .extend(
         {
             cv.Optional(CONF_LAMBDA): cv.returning_lambda,

esphome/components/template/event/__init__.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
 from esphome.components import event
 import esphome.config_validation as cv
-from esphome.const import CONF_EVENT_TYPES
+from esphome.const import CONF_DEVICE_CLASS, CONF_EVENT_TYPES
 
 from .. import template_ns
 
@@ -9,7 +9,9 @@ CODEOWNERS = ["@nohat"]
 
 TemplateEvent = template_ns.class_("TemplateEvent", event.Event, cg.Component)
 
-CONFIG_SCHEMA = event.event_schema(TemplateEvent).extend(
+CONFIG_SCHEMA = cv.with_visibility(
+    event.event_schema(TemplateEvent), cv.Visibility.UI, CONF_DEVICE_CLASS
+).extend(
     {
         cv.Required(CONF_EVENT_TYPES): cv.ensure_list(cv.string_strict),
     }

esphome/components/template/number/__init__.py

@@ -3,6 +3,7 @@ import esphome.codegen as cg
 from esphome.components import number
 import esphome.config_validation as cv
 from esphome.const import (
+    CONF_DEVICE_CLASS,
     CONF_ID,
     CONF_INITIAL_VALUE,
     CONF_LAMBDA,
@@ -12,6 +13,7 @@ from esphome.const import (
     CONF_RESTORE_VALUE,
     CONF_SET_ACTION,
     CONF_STEP,
+    CONF_UNIT_OF_MEASUREMENT,
 )
 
 from .. import template_ns
@@ -46,7 +48,12 @@ def validate(config):
 
 
 CONFIG_SCHEMA = cv.All(
-    number.number_schema(TemplateNumber)
+    cv.with_visibility(
+        number.number_schema(TemplateNumber),
+        cv.Visibility.UI,
+        CONF_DEVICE_CLASS,
+        CONF_UNIT_OF_MEASUREMENT,
+    )
     .extend(
         {
             cv.Required(CONF_MAX_VALUE): cv.float_,

esphome/components/template/sensor/__init__.py

@@ -2,7 +2,16 @@ from esphome import automation
 import esphome.codegen as cg
 from esphome.components import sensor
 import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_LAMBDA, CONF_STATE
+from esphome.const import (
+    CONF_ACCURACY_DECIMALS,
+    CONF_DEVICE_CLASS,
+    CONF_FORCE_UPDATE,
+    CONF_ID,
+    CONF_LAMBDA,
+    CONF_STATE,
+    CONF_STATE_CLASS,
+    CONF_UNIT_OF_MEASUREMENT,
+)
 
 from .. import template_ns
 
@@ -11,9 +20,14 @@ TemplateSensor = template_ns.class_(
 )
 
 CONFIG_SCHEMA = (
-    sensor.sensor_schema(
-        TemplateSensor,
-        accuracy_decimals=1,
+    cv.with_visibility(
+        sensor.sensor_schema(TemplateSensor, accuracy_decimals=1),
+        cv.Visibility.UI,
+        CONF_UNIT_OF_MEASUREMENT,
+        CONF_ACCURACY_DECIMALS,
+        CONF_DEVICE_CLASS,
+        CONF_STATE_CLASS,
+        CONF_FORCE_UPDATE,
     )
     .extend(
         {

esphome/components/template/switch/__init__.py

@@ -4,6 +4,7 @@ from esphome.components import switch
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_ASSUMED_STATE,
+    CONF_DEVICE_CLASS,
     CONF_ID,
     CONF_LAMBDA,
     CONF_OPTIMISTIC,
@@ -31,7 +32,11 @@ def validate(config):
 
 
 CONFIG_SCHEMA = cv.All(
-    switch.switch_schema(TemplateSwitch)
+    cv.with_visibility(
+        switch.switch_schema(TemplateSwitch),
+        cv.Visibility.UI,
+        CONF_DEVICE_CLASS,
+    )
     .extend(
         {
             cv.Optional(CONF_LAMBDA): cv.returning_lambda,

esphome/components/template/text_sensor/__init__.py

@@ -3,7 +3,7 @@ import esphome.codegen as cg
 from esphome.components import text_sensor
 from esphome.components.text_sensor import TextSensorPublishAction
 import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_LAMBDA, CONF_STATE
+from esphome.const import CONF_DEVICE_CLASS, CONF_ID, CONF_LAMBDA, CONF_STATE
 
 from .. import template_ns
 
@@ -12,7 +12,11 @@ TemplateTextSensor = template_ns.class_(
 )
 
 CONFIG_SCHEMA = (
-    text_sensor.text_sensor_schema()
+    cv.with_visibility(
+        text_sensor.text_sensor_schema(),
+        cv.Visibility.UI,
+        CONF_DEVICE_CLASS,
+    )
     .extend(
         {
             cv.GenerateID(): cv.declare_id(TemplateTextSensor),

esphome/components/template/valve/__init__.py

@@ -6,6 +6,7 @@ from esphome.const import (
     CONF_ASSUMED_STATE,
     CONF_CLOSE_ACTION,
     CONF_CURRENT_OPERATION,
+    CONF_DEVICE_CLASS,
     CONF_ID,
     CONF_LAMBDA,
     CONF_OPEN_ACTION,
@@ -36,7 +37,11 @@ CONF_HAS_POSITION = "has_position"
 CONF_TOGGLE_ACTION = "toggle_action"
 
 CONFIG_SCHEMA = (
-    valve.valve_schema(TemplateValve)
+    cv.with_visibility(
+        valve.valve_schema(TemplateValve),
+        cv.Visibility.UI,
+        CONF_DEVICE_CLASS,
+    )
     .extend(
         {
             cv.Optional(CONF_LAMBDA): cv.returning_lambda,

esphome/components/wifi/__init__.py

@@ -66,13 +66,14 @@ from esphome.const import (
 )
 from esphome.core import (
     CORE,
+    ID,
     CoroPriority,
     EsphomeError,
     HexInt,
     coroutine_with_priority,
 )
 import esphome.final_validate as fv
-from esphome.types import ConfigType
+from esphome.types import ConfigType, TemplateArgsType
 
 from . import wpa2_eap
 
@@ -208,6 +209,7 @@ WiFiEnabledCondition = wifi_ns.class_("WiFiEnabledCondition", Condition)
 WiFiAPActiveCondition = wifi_ns.class_("WiFiAPActiveCondition", Condition)
 WiFiEnableAction = wifi_ns.class_("WiFiEnableAction", automation.Action)
 WiFiDisableAction = wifi_ns.class_("WiFiDisableAction", automation.Action)
+WiFiRoamAction = wifi_ns.class_("WiFiRoamAction", automation.Action)
 WiFiConfigureAction = wifi_ns.class_(
     "WiFiConfigureAction", automation.Action, cg.Component
 )
@@ -820,6 +822,18 @@ async def wifi_disable_to_code(config, action_id, template_arg, args):
     return cg.new_Pvariable(action_id, template_arg)
 
 
+@automation.register_action(
+    "wifi.roam", WiFiRoamAction, cv.Schema({}), synchronous=True
+)
+async def wifi_roam_to_code(
+    config: ConfigType,
+    action_id: ID,
+    template_arg: cg.TemplateArguments,
+    args: TemplateArgsType,
+) -> cg.MockObj:
+    return cg.new_Pvariable(action_id, template_arg)
+
+
 KEEP_SCAN_RESULTS_KEY = "wifi_keep_scan_results"
 RUNTIME_POWER_SAVE_KEY = "wifi_runtime_power_save"
 RUNTIME_ROAMING_SUPPRESSION_KEY = "wifi_runtime_roaming_suppression"

esphome/components/wifi/automation.h

@@ -31,6 +31,11 @@ template<typename... Ts> class WiFiDisableAction final : public Action<Ts...> {
   void play(const Ts &...x) override { global_wifi_component->disable(); }
 };
 
+template<typename... Ts> class WiFiRoamAction final : public Action<Ts...> {
+ public:
+  void play(const Ts &...x) override { global_wifi_component->force_roam_check(); }
+};
+
 template<typename... Ts> class WiFiConfigureAction final : public Action<Ts...>, public Component {
  public:
   TEMPLATABLE_VALUE(std::string, ssid)

esphome/components/wifi/wifi_component.cpp

@@ -846,17 +846,18 @@ void WiFiComponent::loop() {
           this->notify_connect_state_listeners_();
 #endif
 
-          // Post-connect roaming: check for better AP
-          if (this->post_connect_roaming_) {
-            if (this->is_roaming_scan_active()) {
-              if (this->scan_done_) {
-                this->process_roaming_scan_();
-              }
-              // else: scan in progress, wait
-            } else if (this->roaming_state_ == RoamingState::IDLE && this->roaming_attempts_ < ROAMING_MAX_ATTEMPTS &&
-                       now - this->roaming_last_check_ >= ROAMING_CHECK_INTERVAL && !this->roaming_suppressed_()) {
-              this->check_roaming_(now);
+          // Post-connect roaming: check for better AP. A scan may have been started by an
+          // explicit force_roam_check() even when post_connect_roaming_ is disabled, so the
+          // scan must always be consumed here to avoid leaving roaming_state_ stuck.
+          if (this->is_roaming_scan_active()) {
+            if (this->scan_done_) {
+              this->process_roaming_scan_();
             }
+            // else: scan in progress, wait
+          } else if (this->post_connect_roaming_ && this->roaming_state_ == RoamingState::IDLE &&
+                     this->roaming_attempts_ < ROAMING_MAX_ATTEMPTS &&
+                     now - this->roaming_last_check_ >= ROAMING_CHECK_INTERVAL && !this->roaming_suppressed_()) {
+            this->check_roaming_(now);
           }
         }
         break;
@@ -2463,6 +2464,17 @@ void WiFiComponent::notify_scan_results_listeners_() {
 }
 #endif  // USE_WIFI_SCAN_RESULTS_LISTENERS
 
+void WiFiComponent::force_roam_check() {
+  if (!this->is_connected() || this->roaming_state_ != RoamingState::IDLE || this->roaming_suppressed_()) {
+    ESP_LOGD(TAG, "Roam check requested, but not able to check now");
+    return;
+  }
+  // Reset the attempt counter so a prior run of failed roams doesn't block this explicit request
+  // Note that this re-arms automatic roaming if enabled.
+  this->roaming_attempts_ = 0;
+  this->check_roaming_(millis());
+}
+
 void WiFiComponent::check_roaming_(uint32_t now) {
   // Guard: not for hidden networks (may not appear in scan)
   const WiFiAP *selected = this->get_selected_sta_();
@@ -2484,7 +2496,11 @@ void WiFiComponent::check_roaming_(uint32_t now) {
 
   ESP_LOGD(TAG, "Roam scan (%d dBm, attempt %u/%u)", rssi, this->roaming_attempts_, ROAMING_MAX_ATTEMPTS);
   this->roaming_state_ = RoamingState::SCANNING;
-  this->wifi_scan_start_(this->passive_scan_);
+  if (!this->wifi_scan_start_(this->passive_scan_)) {
+    // Scan failed to start (e.g. busy) - don't get stuck in SCANNING forever
+    ESP_LOGD(TAG, "Roam scan failed to start");
+    this->roaming_state_ = RoamingState::IDLE;
+  }
 }
 
 void WiFiComponent::process_roaming_scan_() {

esphome/components/wifi/wifi_component.h

@@ -565,6 +565,12 @@ class WiFiComponent final : public Component {
   void set_keep_scan_results(bool keep_scan_results) { this->keep_scan_results_ = keep_scan_results; }
   void set_post_connect_roaming(bool enabled) { this->post_connect_roaming_ = enabled; }
 
+  /** Force an immediate post-connect roaming check, bypassing the periodic interval and the
+   * per-connection attempt limit. Does nothing (besides a debug log) if not connected, if a
+   * roam scan or connect is already in progress, or if roaming is currently suppressed.
+   */
+  void force_roam_check();
+
 #ifdef USE_WIFI_CONNECT_TRIGGER
   Trigger<> *get_connect_trigger() { return &this->connect_trigger_; }
 #endif

esphome/components/zigbee/time/zigbee_time_zephyr.cpp

@@ -1,6 +1,7 @@
 #include "zigbee_time_zephyr.h"
 #if defined(USE_ZIGBEE) && defined(USE_NRF52) && defined(USE_TIME)
 #include "esphome/core/log.h"
+#include "esphome/core/application.h"
 
 namespace esphome::zigbee {
 
@@ -47,6 +48,7 @@ void ZigbeeTime::set_epoch_time(uint32_t epoch) {
     this->synchronize_epoch_(epoch);
     this->has_time_ = true;
   });
+  App.wake_loop_threadsafe();
 }
 
 void ZigbeeTime::zcl_device_cb_(zb_bufid_t bufid) {

esphome/components/zigbee/zigbee_esp32.cpp

@@ -49,7 +49,8 @@ void ZigbeeComponent::factory_reset() {
 
 void ZigbeeComponent::esp_zigbee_alarm_bdb_commissioning(ezb_bdb_comm_mode_mask_t mode) {
   if (!esp_zigbee_lock_acquire(10 / portTICK_PERIOD_MS)) {
-    global_zigbee->set_timeout("zb_init", 10, [mode]() { ZigbeeComponent::esp_zigbee_alarm_bdb_commissioning(mode); });
+    global_zigbee->set_timeout("zb_init", 100, [mode]() { ZigbeeComponent::esp_zigbee_alarm_bdb_commissioning(mode); });
+    App.wake_loop_threadsafe();
     return;
   }
   if (ezb_bdb_start_top_level_commissioning(mode) != EZB_ERR_NONE) {
@@ -88,6 +89,7 @@ bool ZigbeeComponent::app_signal_handler(const ezb_app_signal_t *app_signal) {
         global_zigbee->set_timeout("zb_init", 1000, []() {
           ZigbeeComponent::esp_zigbee_alarm_bdb_commissioning(EZB_BDB_MODE_INITIALIZATION);
         });
+        App.wake_loop_threadsafe();
       }
     } break;
     case EZB_BDB_SIGNAL_STEERING: {
@@ -113,6 +115,7 @@ bool ZigbeeComponent::app_signal_handler(const ezb_app_signal_t *app_signal) {
             ZigbeeComponent::esp_zigbee_alarm_bdb_commissioning(EZB_BDB_MODE_NETWORK_STEERING);
           });
         }
+        App.wake_loop_threadsafe();
       }
     } break;
     case EZB_ZDO_SIGNAL_LEAVE: {

esphome/components/zigbee/zigbee_zephyr.cpp

@@ -1,10 +1,10 @@
 #include "zigbee_zephyr.h"
 #if defined(USE_ZIGBEE) && defined(USE_NRF52)
 #include "esphome/core/log.h"
+#include "esphome/core/application.h"
 #include <zephyr/settings/settings.h>
 #include <zephyr/storage/flash_map.h>
 #include "esphome/core/hal.h"
-#include "esphome/core/wake.h"
 
 extern "C" {
 #include <zboss_api.h>
@@ -120,7 +120,7 @@ void ZigbeeComponent::zcl_device_cb(zb_bufid_t bufid) {
   /* Set default response value. */
   p_device_cb_param->status = RET_OK;
 
-  esphome::wake_loop_threadsafe();
+  App.wake_loop_threadsafe();
 
   // endpoints are enumerated from 1
   if (global_zigbee->callbacks_.size() >= endpoint) {
@@ -138,6 +138,7 @@ void ZigbeeComponent::on_join_(bool factory_new) {
     ESP_LOGD(TAG, "Joined the network");
     this->join_cb_.call(factory_new);
   });
+  App.wake_loop_threadsafe();
 }
 
 void ZigbeeComponent::on_start_() {
@@ -145,6 +146,7 @@ void ZigbeeComponent::on_start_() {
     ESP_LOGD(TAG, "Started zigbee stack");
     this->start_cb_.call();
   });
+  App.wake_loop_threadsafe();
 }
 
 #ifdef USE_ZIGBEE_WIPE_ON_BOOT

esphome/config_validation.py

@@ -4,6 +4,7 @@ from __future__ import annotations
 
 from collections.abc import Callable
 from contextlib import contextmanager, suppress
+import copy
 from datetime import datetime
 from ipaddress import (
     AddressValueError,
@@ -419,6 +420,37 @@ class Required(vol.Required):
         self.visibility: Visibility | None = visibility
 
 
+def with_visibility(schema: Schema, visibility: Visibility, *keys: str) -> Schema:
+    """Return a copy of ``schema`` with the given ``keys`` re-marked at ``visibility``.
+
+    Lets a platform override the editor :class:`Visibility` of fields it
+    inherits from a shared schema builder — without that builder needing a
+    visibility parameter of its own. The canonical use is a ``template``
+    platform promoting the value metadata its user is expected to define
+    (``device_class``, ``unit_of_measurement``, …) onto the main form:
+
+        CONFIG_SCHEMA = cv.with_visibility(
+            sensor.sensor_schema(TemplateSensor),
+            cv.Visibility.UI,
+            CONF_DEVICE_CLASS, CONF_UNIT_OF_MEASUREMENT,
+        )
+
+    The original marker's key, default and validator are preserved; only the
+    visibility changes, and the input ``schema`` is left untouched. Raises if
+    a requested key is not present so typos fail at schema-build time.
+    """
+    wanted = {str(k) for k in keys}
+    overrides = {}
+    for marker, validator in schema.schema.items():
+        if str(marker) in wanted:
+            marker = copy.copy(marker)
+            marker.visibility = visibility
+            overrides[marker] = validator
+    if missing := wanted - {str(m) for m in overrides}:
+        raise ValueError(f"with_visibility: keys not in schema: {sorted(missing)}")
+    return schema.extend(overrides)
+
+
 class FinalExternalInvalid(Invalid):
     """Represents an invalid value in the final validation phase where the path should not be prepended."""
 

esphome/const.py

@@ -4,7 +4,7 @@ from enum import Enum
 
 from esphome.enum import StrEnum
 
-__version__ = "2026.9.0b3"
+__version__ = "2026.10.0-dev"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (

esphome/core/defines.h

@@ -181,6 +181,7 @@
 #define USE_SENSOR
 #define USE_SENSOR_FILTER
 #define USE_SERIAL_PROXY
+#define USE_SERIAL_PROXY_TAP
 #define USE_SETUP_PRIORITY_OVERRIDE
 #define USE_STATUS_LED
 #define USE_STATUS_SENSOR

esphome/happy_eyeballs.py

@@ -69,10 +69,7 @@ def _make_create_connection() -> Callable[..., socket.socket]:
 
     from aiohappyeyeballs import start_connection
     from urllib3.exceptions import LocationParseError
-    from urllib3.util.connection import (  # noqa: PLC2701
-        _set_socket_options,
-        allowed_gai_family,
-    )
+    from urllib3.util.connection import _set_socket_options, allowed_gai_family  # noqa: PLC2701
     from urllib3.util.timeout import _DEFAULT_TIMEOUT  # noqa: PLC2701
 
     from esphome import async_thread

requirements.txt

@@ -10,11 +10,11 @@ tzlocal==5.4.4    # from time
 tzdata>=2026.3  # from time
 pyserial==3.5
 platformio==6.1.19
-esptool==5.3.1
+esptool==5.4.0
 click==8.3.3
-aioesphomeapi==46.3.0
+aioesphomeapi==46.4.0
 aiohappyeyeballs==2.7.1  # Happy Eyeballs for requests downloads; already pulled in by aioesphomeapi
-zeroconf==0.151.2
+zeroconf==0.151.3
 puremagic==2.2.0
 ruamel.yaml==0.19.1 # dashboard_import
 ruamel.yaml.clib==0.2.15 # dashboard_import
@@ -27,9 +27,9 @@ bleak==3.0.2
 smpclient==7.2.0
 requests==2.34.2
 py7zr==1.1.3
-platformdirs==4.11.5  # native esp-idf toolchain global cache dir
-ninja==1.13.0  # native esp8266 arduino toolchain build driver
-filelock==3.32.4  # inter-process locks (PlatformIO cache heal, git clone cache); >=3.32 for FileLock(fallback_to_soft=...), older versions silently drop the kwarg
+platformdirs==4.11.7  # native esp-idf toolchain global cache dir
+ninja==1.13.2  # native esp8266 arduino toolchain build driver
+filelock==3.32.5  # inter-process locks (PlatformIO cache heal, git clone cache); >=3.32 for FileLock(fallback_to_soft=...), older versions silently drop the kwarg
 
 # esp-idf >= 5.0 requires this
 pyparsing >= 3.3.2

requirements_dev.txt

@@ -1,4 +1,4 @@
 # Useful stuff when working in a development environment
-clang-format==13.0.1  # also change in .pre-commit-config.yaml and Dockerfile when updating
+clang-format==13.0.1  # .pre-commit-config.yaml rev synced by script/sync_dependency_versions.py
 clang-tidy==22.1.8
-yamllint==1.38.0  # also change in .pre-commit-config.yaml when updating
+yamllint==1.38.0  # .pre-commit-config.yaml rev synced by script/sync_dependency_versions.py

requirements_test.txt

@@ -1,8 +1,9 @@
 pylint==4.0.8
-flake8==7.3.0  # also change in .pre-commit-config.yaml when updating
-ruff==0.16.5  # also change in .pre-commit-config.yaml when updating
-pyupgrade==3.21.2  # also change in .pre-commit-config.yaml when updating
-prek==0.5.0  # also change in .github/workflows/ci.yml when updating
+flake8==7.3.0  # .pre-commit-config.yaml rev synced by script/sync_dependency_versions.py
+ruff==0.16.6  # .pre-commit-config.yaml rev synced by script/sync_dependency_versions.py
+pyupgrade==3.21.2  # .pre-commit-config.yaml rev synced by script/sync_dependency_versions.py
+prek==0.5.2  # .github/workflows/ci.yml reads this pin
+yamlrocks==0.6.1  # used by script/sync_dependency_versions.py
 
 # Unit tests
 pytest==9.1.1

script/git-hooks/post-checkout

@@ -1,20 +1,72 @@
 #!/bin/sh
 # Prepare the dev environment for a new checkout or worktree.
 #
-# Installed into the git hooks directory by script/setup. Deliberately tiny and
-# self-contained: it stays valid on branches where script/setup does not exist,
-# and simply does nothing there.
+# Installed into the git hooks directory by script/setup.py. Deliberately tiny
+# and self-contained: it stays valid on branches where the setup script does not
+# exist, and simply does nothing there.
 
 # $3 is 1 for a branch checkout, 0 for a file checkout.
 [ "$3" = "1" ] || exit 0
 
 top=$(git rev-parse --show-toplevel 2>/dev/null) || exit 0
 
-# This also runs on ordinary branch switches, where there is nothing to do.
+# This also runs on ordinary branch switches, where there is nothing to do. Both
+# layouts are checked because git for Windows runs hooks under its own bundled
+# shell, where the environment lives in venv/Scripts rather than venv/bin.
 [ -x "$top/venv/bin/python" ] && exit 0
-[ -x "$top/script/setup" ] || exit 0
+[ -f "$top/venv/Scripts/python.exe" ] && exit 0
+
+# Branches from before the setup script moved to Python carry only the shell
+# entry point, so whichever one the checked out branch has is used.
+py=
+if [ -f "$top/script/setup.py" ]; then
+  # The interpreter goes by different names across platforms, and on Windows
+  # "python3" is often a stub that opens the app store instead of running
+  # anything, so each candidate is tried before it is used. Doing nothing is the
+  # right outcome when none of them work.
+  for candidate in "python3" "python" "py -3"; do
+    # Unquoted on purpose: the launcher candidate is a command plus a flag.
+    if $candidate -c "" >/dev/null 2>&1; then
+      py=$candidate
+      break
+    fi
+  done
+  [ -n "$py" ] || exit 0
+elif ! [ -x "$top/script/setup" ]; then
+  exit 0
+fi
+
+# Every worktree shares the hooks directory of the checkout it was created
+# from, and the setup script run below is the one from whichever branch was just
+# checked out. Older branches install their own pre-commit hook without checking
+# for a worktree: that moves the shared hook aside as pre-commit.legacy and
+# replaces it with one tied to this worktree's virtual environment, so commits
+# break in every checkout. To rule that out, the hooks directory is copied
+# before the setup script runs and put back exactly as it was afterwards,
+# including removing any file the setup script added.
+hooks=$(git rev-parse --path-format=absolute --git-path hooks 2>/dev/null) || exit 0
+snap=$(mktemp -d "$hooks/.post-checkout.XXXXXX") || exit 0
+cp -p "$hooks"/* "$snap"/ 2>/dev/null
 
 # Clear VIRTUAL_ENV so a checkout made from a shell with an environment already
 # activated still gets its own, rather than having the active one repointed at
 # this working tree.
-exec env -u VIRTUAL_ENV "$top/script/setup"
+unset VIRTUAL_ENV
+if [ -n "$py" ]; then
+  # Unquoted on purpose, as above.
+  $py "$top/script/setup.py"
+else
+  "$top/script/setup"
+fi
+status=$?
+
+for f in "$hooks"/*; do
+  [ -e "$snap/${f##*/}" ] || rm -f "$f"
+done
+# Files are moved rather than copied so a hook that is still running, such as
+# this one, is swapped out atomically instead of being rewritten in place.
+for f in "$snap"/*; do
+  cmp -s "$f" "$hooks/${f##*/}" 2>/dev/null || mv -f "$f" "$hooks/${f##*/}"
+done
+rm -rf "$snap"
+exit $status

script/helpers.py

@@ -1104,6 +1104,10 @@ def get_components_per_integration_fixture() -> dict[str, set[str]]:
 
 
 _TEST_FUNC_RE = re.compile(r"async def (test_\w+)")
+# Any usage form (decorator, pytestmark assignment or list element); only
+# test_*.py files are scanned, so the marker docs elsewhere cannot false-hit
+_SHARED_YAML_USE_RE = re.compile(r"\bmark\.shared_yaml")
+_SHARED_YAML_ARG_RE = re.compile(r"\(\s*[\"'](\w+)[\"']\s*\)")
 
 
 @cache
@@ -1123,6 +1127,19 @@ def get_fixture_to_test_files() -> dict[str, frozenset[str]]:
         for func in _TEST_FUNC_RE.findall(content):
             base_name = func.replace("test_", "").partition("[")[0]
             result.setdefault(base_name, set()).add(rel_path)
+        # Shared fixtures are named by marker, not by a test function; each
+        # decorator must carry a string literal or its fixture would silently
+        # map to no tests
+        for use in _SHARED_YAML_USE_RE.finditer(content):
+            arg = _SHARED_YAML_ARG_RE.match(content, use.end())
+            if arg is None:
+                line = content.count("\n", 0, use.start()) + 1
+                raise ValueError(
+                    f"{rel_path}:{line}: shared_yaml marker must take a "
+                    "single-line string literal so CI test selection can map "
+                    "its fixture"
+                )
+            result.setdefault(arg.group(1), set()).add(rel_path)
 
     return {k: frozenset(v) for k, v in result.items()}
 

script/setup

@@ -1,71 +1,7 @@
 #!/usr/bin/env bash
-# Set up ESPHome dev environment
+# Set up ESPHome dev environment.
+#
+# The work is done by setup.py, which script/setup.bat also runs, so the Unix
+# and Windows entry points share one implementation.
 
-set -e
-
-cd "$(dirname "$0")/.."
-if [ -n "$VIRTUAL_ENV" ]; then
-  # A virtual environment is already active (e.g. the devcontainer's pre-provisioned
-  # esphome-venv). Install into it rather than creating a ./venv in the workspace.
-  venv_state=active
-elif [ -x venv/bin/python ]; then
-  # Reuse the environment from an earlier run, so this script can be run again
-  # at any time to pick up dependency changes.
-  venv_state=reused
-  source venv/bin/activate
-else
-  venv_state=created
-  # --clear replaces a partial environment left behind by an interrupted run.
-  if [ -x "$(command -v uv)" ]; then
-    uv venv --clear --seed venv
-  else
-    python3 -m venv --clear venv
-  fi
-  source venv/bin/activate
-fi
-
-if ! [ -x "$(command -v uv)" ]; then
-  python3 -m pip install uv
-fi
-
-uv pip install setuptools wheel
-uv pip install -e ".[dev,test]" --config-settings editable_mode=compat
-
-# A worktree shares one git hooks directory with the main checkout it was
-# created from, so hooks are installed from the main checkout only. Installing
-# from a worktree would point the shared hook at that worktree's virtual
-# environment, breaking it for everyone once the worktree is removed.
-git_dir="$(git rev-parse --absolute-git-dir 2>/dev/null || true)"
-common_dir="$(git rev-parse --path-format=absolute --git-common-dir 2>/dev/null || true)"
-if [ -n "$common_dir" ] && [ "$git_dir" = "$common_dir" ]; then
-  # --overwrite replaces any hook already in place. Without it, prek finds a
-  # previously installed pre-commit hook, moves it aside to
-  # .git/hooks/pre-commit.legacy and keeps calling it, so every commit would
-  # run both tools.
-  prek install --overwrite
-
-  # Prepares the virtual environment for new checkouts and worktrees. Installed
-  # once here, it covers every worktree created from this checkout.
-  if [ -d "$common_dir/hooks" ]; then
-    cp script/git-hooks/post-checkout "$common_dir/hooks/post-checkout"
-    chmod +x "$common_dir/hooks/post-checkout"
-  fi
-fi
-
-mkdir -p .temp
-
-echo
-echo
-case "$venv_state" in
-  created)
-    echo "Virtual environment created at ./venv. Run 'source venv/bin/activate' to use it."
-    ;;
-  reused)
-    echo "Dependencies updated in the existing ./venv. Run 'source venv/bin/activate' to use it."
-    ;;
-  active)
-    echo "Dependencies installed into the active virtual environment:"
-    echo "  $VIRTUAL_ENV"
-    echo "It is already active in this shell, so no 'source venv/bin/activate' is needed."
-    ;;
-esac
+exec python3 "$(dirname "$0")/setup.py" "$@"

script/setup.bat

@@ -1,28 +1 @@
-@echo off
-
-if defined VIRTUAL_ENV goto :install
-
-echo Starting the Virtual Environment
-python -m venv venv
-call venv/Scripts/activate
-echo Running the Virtual Environment
-
-:install
-
-echo Installing required packages...
-
-python.exe -m pip install --upgrade pip
-
-pip3 install -r requirements.txt -r requirements_test.txt -r requirements_dev.txt
-pip3 install setuptools wheel
-pip3 install -e ".[dev,test]" --config-settings editable_mode=compat
-
-rem --overwrite replaces any hook already in place. Without it, prek finds a
-rem previously installed pre-commit hook, moves it aside to
-rem .git/hooks/pre-commit.legacy and keeps calling it, so every commit would
-rem run both tools.
-prek install --overwrite
-
-echo .
-echo .
-echo Virtual environment created. Run 'venv/Scripts/activate' to use it.
+@python "%~dp0setup.py" %*

script/setup.py

@@ -0,0 +1,222 @@
+#!/usr/bin/env python3
+"""Set up the ESPHome development environment.
+
+Shared implementation behind script/setup and script/setup.bat, so the Unix and
+Windows entry points cannot drift apart. Uses only the standard library: it runs
+before any dependency has been installed.
+"""
+
+import os
+from pathlib import Path
+import shutil
+import subprocess
+import sys
+import sysconfig
+
+MIN_PYTHON = (3, 12)
+
+ROOT = Path(__file__).resolve().parent.parent
+DEFAULT_VENV = ROOT / "venv"
+POST_CHECKOUT_HOOK = ROOT / "script" / "git-hooks" / "post-checkout"
+
+# State of the environment the dependencies end up in, used for the closing
+# message.
+VENV_ACTIVE = "active"
+VENV_REUSED = "reused"
+VENV_CREATED = "created"
+
+
+def bin_dir(venv: Path) -> Path:
+    """Return the directory holding a virtual environment's executables.
+
+    The "venv" scheme resolves to bin on Unix and Scripts on Windows, so the
+    layout does not have to be hardcoded here.
+    """
+    base = str(venv)
+    return Path(
+        sysconfig.get_path("scripts", "venv", vars={"base": base, "platbase": base})
+    )
+
+
+def venv_python(venv: Path) -> Path:
+    """Return the path to a virtual environment's interpreter."""
+    name = "python.exe" if os.name == "nt" else "python"
+    return bin_dir(venv) / name
+
+
+def run(command: list[str], env: dict[str, str] | None = None) -> None:
+    """Run a command, aborting the whole script if it fails."""
+    print(f"+ {' '.join(command)}", flush=True)
+    result = subprocess.run(command, cwd=ROOT, env=env, check=False)
+    if result.returncode != 0:
+        # Some tools fail without printing anything, so name the step that broke.
+        print(
+            f"Failed with exit code {result.returncode}: {command[0]}", file=sys.stderr
+        )
+        raise SystemExit(result.returncode)
+
+
+def git_output(*args: str) -> str:
+    """Return the trimmed output of a git command, or "" if it cannot be run."""
+    try:
+        result = subprocess.run(
+            ["git", *args], cwd=ROOT, capture_output=True, text=True, check=False
+        )
+    except OSError:
+        # Git is not required to install the dependencies, only to install hooks.
+        return ""
+    if result.returncode != 0:
+        return ""
+    return result.stdout.strip()
+
+
+def create_venv(venv: Path) -> None:
+    """Create a virtual environment, replacing anything already at the path."""
+    # --clear replaces a partial environment left behind by an interrupted run.
+    if (uv := shutil.which("uv")) is not None:
+        run([uv, "venv", "--clear", "--seed", str(venv)])
+    else:
+        run([sys.executable, "-m", "venv", "--clear", str(venv)])
+
+
+def venv_environment(venv: Path) -> dict[str, str]:
+    """Return the environment child processes need to target a virtual env.
+
+    Equivalent to sourcing the environment's activate script: tools such as uv
+    and prek pick the environment up from VIRTUAL_ENV and PATH.
+    """
+    env = dict(os.environ)
+    env["VIRTUAL_ENV"] = str(venv)
+    env.pop("PYTHONHOME", None)
+    path = str(bin_dir(venv))
+    # An empty entry would be appended if PATH is unset, and on Unix that means
+    # the working directory is searched for executables.
+    if existing := env.get("PATH"):
+        path = os.pathsep.join([path, existing])
+    env["PATH"] = path
+    return env
+
+
+def find_uv(venv: Path, env: dict[str, str]) -> str:
+    """Return the path to uv, installing it into the environment if needed."""
+    if (uv := shutil.which("uv", path=env["PATH"])) is not None:
+        return uv
+    run([str(venv_python(venv)), "-m", "pip", "install", "uv"], env=env)
+    if (uv := shutil.which("uv", path=env["PATH"])) is not None:
+        return uv
+    raise SystemExit("uv could not be installed, aborting.")
+
+
+def install_dependencies(venv: Path, env: dict[str, str]) -> None:
+    """Install ESPHome and its development dependencies into the environment."""
+    uv = find_uv(venv, env)
+    run([uv, "pip", "install", "setuptools", "wheel"], env=env)
+    # The dev and test extras pull in requirements_dev.txt and
+    # requirements_test.txt, and the package itself pulls in requirements.txt,
+    # so this single install covers every requirements file.
+    run(
+        [
+            uv,
+            "pip",
+            "install",
+            "-e",
+            ".[dev,test]",
+            "--config-settings",
+            "editable_mode=compat",
+        ],
+        env=env,
+    )
+
+
+def install_git_hooks(env: dict[str, str]) -> None:
+    """Install the git hooks, but only when run from the main checkout.
+
+    A worktree shares one git hooks directory with the main checkout it was
+    created from. Installing from a worktree would point the shared hook at that
+    worktree's virtual environment, breaking it for everyone once the worktree is
+    removed.
+    """
+    git_dir = git_output("rev-parse", "--absolute-git-dir")
+    common_dir = git_output("rev-parse", "--path-format=absolute", "--git-common-dir")
+    if not git_dir or not common_dir or Path(git_dir) != Path(common_dir):
+        return
+
+    prek = shutil.which("prek", path=env["PATH"])
+    if prek is None:
+        raise SystemExit("prek was not installed, aborting.")
+    # --overwrite replaces any hook already in place. Without it, prek finds a
+    # previously installed pre-commit hook, moves it aside to
+    # .git/hooks/pre-commit.legacy and keeps calling it, so every commit would
+    # run both tools.
+    run([prek, "install", "--overwrite"], env=env)
+
+    # Prepares the virtual environment for new checkouts and worktrees. Installed
+    # once here, it covers every worktree created from this checkout.
+    hooks_dir = Path(common_dir) / "hooks"
+    if hooks_dir.is_dir():
+        installed = hooks_dir / "post-checkout"
+        shutil.copyfile(POST_CHECKOUT_HOOK, installed)
+        installed.chmod(0o755)
+
+
+def activate_hint() -> str:
+    """Return the command that activates the environment this script creates."""
+    activate = bin_dir(DEFAULT_VENV).relative_to(ROOT) / "activate"
+    if os.name == "nt":
+        return str(activate)
+    return f"source {activate.as_posix()}"
+
+
+def report(state: str, venv: Path) -> None:
+    """Print the closing message for the environment that was set up."""
+    location = f"./{DEFAULT_VENV.name}"
+    print()
+    print()
+    if state == VENV_ACTIVE:
+        print("Dependencies installed into the active virtual environment:")
+        print(f"  {venv}")
+        print(
+            f"It is already active in this shell, so no '{activate_hint()}' is needed."
+        )
+    elif state == VENV_REUSED:
+        print(
+            f"Dependencies updated in the existing {location}. "
+            f"Run '{activate_hint()}' to use it."
+        )
+    else:
+        print(
+            f"Virtual environment created at {location}. "
+            f"Run '{activate_hint()}' to use it."
+        )
+
+
+def main() -> None:
+    """Set up the development environment."""
+    if sys.version_info < MIN_PYTHON:
+        raise SystemExit(
+            f"ESPHome needs Python {MIN_PYTHON[0]}.{MIN_PYTHON[1]} or newer, "
+            f"but this is Python {sys.version.split()[0]}."
+        )
+
+    # A virtual environment that is already active (for example the
+    # devcontainer's pre-provisioned esphome-venv) is installed into rather than
+    # creating a ./venv in the workspace.
+    if active := os.environ.get("VIRTUAL_ENV"):
+        state, venv = VENV_ACTIVE, Path(active)
+    elif venv_python(DEFAULT_VENV).is_file():
+        # Reuse the environment from an earlier run, so this script can be run
+        # again at any time to pick up dependency changes.
+        state, venv = VENV_REUSED, DEFAULT_VENV
+    else:
+        state, venv = VENV_CREATED, DEFAULT_VENV
+        create_venv(venv)
+
+    env = venv_environment(venv)
+    install_dependencies(venv, env)
+    install_git_hooks(env)
+    (ROOT / ".temp").mkdir(exist_ok=True)
+    report(state, venv)
+
+
+if __name__ == "__main__":
+    main()

script/sync_dependency_versions.py

@@ -0,0 +1,164 @@
+#!/usr/bin/env python3
+"""Keep pre-commit hook revs in sync with the requirements files.
+
+Dependabot only bumps the ``package==version`` pins in ``requirements*.txt``.
+Some of those tools are pinned a second time as hook ``rev`` values in
+``.pre-commit-config.yaml``. This script treats the requirements files as
+the source of truth and rewrites the revs to match, editing the config
+through yamlrocks so comments and layout survive.
+
+Run without arguments to apply the changes in place, or with ``--check`` to
+only report drift (exit status 1 when anything is out of sync).
+"""
+
+from __future__ import annotations
+
+import argparse
+from dataclasses import dataclass
+from pathlib import Path
+import re
+import sys
+from typing import Any
+
+import yamlrocks
+
+REPO_ROOT = Path(__file__).resolve().parent.parent
+PRECOMMIT_CONFIG = ".pre-commit-config.yaml"
+
+
+class SyncError(Exception):
+    """A pin could not be located in a requirements file or the config."""
+
+
+@dataclass(frozen=True)
+class SyncTarget:
+    """A requirements pin and the pre-commit repo whose rev mirrors it."""
+
+    package: str
+    requirements_file: str
+    repo: str
+
+
+SYNC_TARGETS: tuple[SyncTarget, ...] = (
+    SyncTarget(
+        "ruff", "requirements_test.txt", "https://github.com/astral-sh/ruff-pre-commit"
+    ),
+    SyncTarget("flake8", "requirements_test.txt", "https://github.com/PyCQA/flake8"),
+    SyncTarget(
+        "pyupgrade", "requirements_test.txt", "https://github.com/asottile/pyupgrade"
+    ),
+    SyncTarget(
+        "clang-format",
+        "requirements_dev.txt",
+        "https://github.com/pre-commit/mirrors-clang-format",
+    ),
+    SyncTarget(
+        "yamllint",
+        "requirements_dev.txt",
+        "https://github.com/adrienverge/yamllint.git",
+    ),
+)
+
+
+def read_requirement_version(requirements: str, package: str) -> str | None:
+    """Return the ``==`` pin for ``package`` or None when it is not pinned."""
+    pattern = re.compile(
+        rf"^{re.escape(package)}==(?P<version>[^\s#]+)",
+        re.MULTILINE | re.IGNORECASE,
+    )
+    match = pattern.search(requirements)
+    return match.group("version") if match else None
+
+
+def find_repo_entry(doc: Any, repo: str) -> Any:
+    """Return the single ``- repo:`` block for ``repo`` in a pre-commit doc."""
+    try:
+        entries = [entry for entry in doc["repos"] if entry["repo"] == repo]
+    except KeyError as err:
+        raise SyncError(f"malformed pre-commit config, missing key {err}") from None
+    if len(entries) != 1:
+        raise SyncError(
+            f"expected exactly one block for repo {repo}, found {len(entries)}"
+        )
+    return entries[0]
+
+
+def current_rev(entry: Any, repo: str) -> tuple[str, str]:
+    """Split the block's rev into its tag prefix (``v`` or empty) and version."""
+    if "rev" not in entry:
+        raise SyncError(f"repo {repo} has no rev")
+    rev = entry["rev"]
+    if not isinstance(rev, str):
+        # A rev such as ``1.0`` parses as a number and cannot be compared or
+        # rewritten safely; quote it in the config instead.
+        raise SyncError(f"rev of repo {repo} is not a string: {rev!r}")
+    prefix = "v" if rev.startswith("v") else ""
+    return prefix, rev.removeprefix("v")
+
+
+def sync(root: Path, *, write: bool) -> list[str]:
+    """Bring every hook rev in line with its requirements pin.
+
+    Returns one description per rev that was (or, when ``write`` is False,
+    would be) changed. Raises SyncError when a pin cannot be found, which
+    means SYNC_TARGETS has gone stale and needs updating by hand.
+    """
+    config_path = root / PRECOMMIT_CONFIG
+    doc = yamlrocks.loads(config_path.read_bytes(), option=yamlrocks.OPT_ROUND_TRIP)
+    requirements: dict[str, str] = {}
+    changes: list[str] = []
+    for target in SYNC_TARGETS:
+        if target.requirements_file not in requirements:
+            requirements[target.requirements_file] = (
+                root / target.requirements_file
+            ).read_text()
+        version = read_requirement_version(
+            requirements[target.requirements_file], target.package
+        )
+        if version is None:
+            raise SyncError(
+                f"{target.requirements_file}: no '{target.package}==' pin found"
+            )
+
+        entry = find_repo_entry(doc, target.repo)
+        prefix, current = current_rev(entry, target.repo)
+        if current == version:
+            continue
+        changes.append(f"{target.package}: {current} -> {version}")
+        entry["rev"] = f"{prefix}{version}"
+
+    if changes and write:
+        config_path.write_bytes(doc.to_yaml())
+    return changes
+
+
+def main(argv: list[str] | None = None) -> int:
+    parser = argparse.ArgumentParser(description=__doc__.splitlines()[0])
+    parser.add_argument(
+        "--check",
+        action="store_true",
+        help="report drift without modifying any file; exit 1 if out of sync",
+    )
+    parser.add_argument(
+        "--root",
+        type=Path,
+        default=REPO_ROOT,
+        help="repository checkout to operate on (default: this checkout)",
+    )
+    args = parser.parse_args(argv)
+
+    try:
+        changes = sync(args.root, write=not args.check)
+    except SyncError as err:
+        print(f"error: {err}", file=sys.stderr)
+        return 1
+
+    for change in changes:
+        print(change)
+    if args.check and changes:
+        return 1
+    return 0
+
+
+if __name__ == "__main__":  # pragma: no cover
+    sys.exit(main())

sdkconfig.defaults

@@ -17,6 +17,8 @@ CONFIG_ESP_TASK_WDT_INIT=y
 CONFIG_ESP_TASK_WDT_PANIC=y
 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=n
 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=n
+CONFIG_FREERTOS_USE_TICKLESS_IDLE=y
+CONFIG_PM_ENABLE=y
 
 # esp32_ble
 CONFIG_BT_ENABLED=y

tests/benchmarks/stubs/esphome/components/infrared/infrared.h

@@ -19,7 +19,7 @@ class InfraredCall {
     return *this;
   }
   InfraredCall &set_repeat_count(uint32_t /*count*/) { return *this; }
-  void perform() {}
+  bool perform() { return false; }
 
  protected:
   Infrared *parent_;

tests/benchmarks/stubs/esphome/components/radio_frequency/radio_frequency.h

@@ -23,7 +23,7 @@ class RadioFrequencyCall {
   RadioFrequencyCall &set_raw_timings_packed(const uint8_t * /*data*/, uint16_t /*length*/, uint16_t /*count*/) {
     return *this;
   }
-  void perform() {}
+  bool perform() { return false; }
 
  protected:
   RadioFrequency *parent_;

tests/benchmarks/stubs/esphome/components/serial_proxy/serial_proxy.h

@@ -40,6 +40,9 @@ class SerialProxy {
     return SerialProxyResult::SERIAL_PROXY_RESULT_OK;
   }
   void write_from_client(api::APIConnection *api_connection, const uint8_t *data, size_t len) {}
+  SerialProxyResult set_mode_from_client(api::APIConnection *api_connection, api::enums::SerialProxyMode mode) {
+    return SerialProxyResult::SERIAL_PROXY_RESULT_OK;
+  }
   SerialProxyResult set_modem_pins(api::APIConnection *api_connection, uint32_t line_states) {
     return SerialProxyResult::SERIAL_PROXY_RESULT_OK;
   }

tests/component_tests/sendspin/config/device_info_default.yaml

@@ -0,0 +1,12 @@
+esphome:
+  name: test
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+
+wifi:
+  ap:
+
+sendspin:

tests/component_tests/sendspin/config/device_info_explicit.yaml

@@ -0,0 +1,18 @@
+esphome:
+  name: test
+  project:
+    name: project_manufacturer.project_model
+    version: 9.9.9
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+
+wifi:
+  ap:
+
+sendspin:
+  manufacturer: Explicit Manufacturer
+  model: Explicit Model
+  firmware_version: 1.2.3

tests/component_tests/sendspin/config/device_info_project.yaml

@@ -0,0 +1,15 @@
+esphome:
+  name: test
+  project:
+    name: project_manufacturer.project_model
+    version: 9.9.9
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+
+wifi:
+  ap:
+
+sendspin:

tests/component_tests/sendspin/test_device_info.py

@@ -0,0 +1,83 @@
+"""Tests for the device information the sendspin hub reports to the server."""
+
+from __future__ import annotations
+
+from collections.abc import Callable
+from pathlib import Path
+
+import pytest
+
+from esphome import config_validation as cv
+from esphome.components.sendspin import (
+    CONF_FIRMWARE_VERSION,
+    CONF_MANUFACTURER,
+    CONFIG_SCHEMA,
+)
+from esphome.const import CONF_MODEL, PlatformFramework
+from tests.component_tests.types import SetCoreConfigCallable
+
+
+def test_explicit_device_info_wins_over_project(
+    generate_main: Callable[[str | Path], str],
+    component_config_path: Callable[[str], Path],
+) -> None:
+    """Configured values take precedence over the project information."""
+    main_cpp = generate_main(component_config_path("device_info_explicit.yaml"))
+
+    assert 'set_manufacturer("Explicit Manufacturer")' in main_cpp
+    assert 'set_model("Explicit Model")' in main_cpp
+    assert 'set_firmware_version("1.2.3")' in main_cpp
+
+
+def test_project_supplies_device_info(
+    generate_main: Callable[[str | Path], str],
+    component_config_path: Callable[[str], Path],
+) -> None:
+    """Without configured values, the project name splits into manufacturer and model."""
+    main_cpp = generate_main(component_config_path("device_info_project.yaml"))
+
+    assert 'set_manufacturer("project_manufacturer")' in main_cpp
+    assert 'set_model("project_model")' in main_cpp
+    assert 'set_firmware_version("9.9.9")' in main_cpp
+
+
+def test_no_device_info_leaves_hub_defaults(
+    generate_main: Callable[[str | Path], str],
+    component_config_path: Callable[[str], Path],
+) -> None:
+    """With neither source, nothing is emitted and the hub keeps its own defaults."""
+    main_cpp = generate_main(component_config_path("device_info_default.yaml"))
+
+    assert "set_manufacturer(" not in main_cpp
+    assert "set_model(" not in main_cpp
+    assert "set_firmware_version(" not in main_cpp
+
+
+@pytest.mark.parametrize(
+    "conf_key", [CONF_MANUFACTURER, CONF_MODEL, CONF_FIRMWARE_VERSION]
+)
+def test_empty_device_info_rejected(
+    set_core_config: SetCoreConfigCallable, conf_key: str
+) -> None:
+    """An empty string would be sent to the server as an empty value, so it is not accepted."""
+    set_core_config(PlatformFramework.ESP32_IDF)
+
+    with pytest.raises(cv.Invalid):
+        CONFIG_SCHEMA({conf_key: ""})
+
+
+@pytest.mark.parametrize(
+    "conf_key", [CONF_MANUFACTURER, CONF_MODEL, CONF_FIRMWARE_VERSION]
+)
+def test_device_info_capped_at_127_bytes(
+    set_core_config: SetCoreConfigCallable, conf_key: str
+) -> None:
+    """The cap is in bytes so the protobuf length prefix stays a single byte."""
+    set_core_config(PlatformFramework.ESP32_IDF)
+
+    CONFIG_SCHEMA({conf_key: "a" * 127})
+    with pytest.raises(cv.Invalid):
+        CONFIG_SCHEMA({conf_key: "a" * 128})
+    # 64 two-byte characters is 128 bytes.
+    with pytest.raises(cv.Invalid):
+        CONFIG_SCHEMA({conf_key: "é" * 64})

tests/component_tests/template/test_template_visibility.py

@@ -0,0 +1,76 @@
+"""The template platforms surface value-describing metadata on the main form.
+
+Hardware platforms get sensible defaults for unit/device_class/etc., so those
+fields fall through to the editor's advanced disclosure. A ``template`` entity
+has no such defaults -- the user is expected to define them -- so the template
+platforms pass ``visibility=cv.Visibility.UI`` to promote them onto the form.
+"""
+
+from __future__ import annotations
+
+import importlib
+
+import pytest
+
+import esphome.config_validation as cv
+
+
+def _markers(schema: cv.Schema) -> dict[str, object]:
+    s = schema
+    if hasattr(s, "validators"):
+        # cv.All -> the schema is the first validator.
+        s = s.validators[0]
+    return {str(k): k for k in s.schema}
+
+
+@pytest.mark.parametrize(
+    ("platform", "fields"),
+    [
+        (
+            "sensor",
+            [
+                "unit_of_measurement",
+                "accuracy_decimals",
+                "device_class",
+                "state_class",
+                "force_update",
+            ],
+        ),
+        ("binary_sensor", ["device_class"]),
+        ("switch", ["device_class"]),
+        ("cover", ["device_class"]),
+        ("button", ["device_class"]),
+        ("valve", ["device_class"]),
+        ("event", ["device_class"]),
+        ("text_sensor", ["device_class"]),
+        ("number", ["device_class", "unit_of_measurement"]),
+    ],
+)
+def test_template_metadata_is_ui(platform: str, fields: list[str]) -> None:
+    mod = importlib.import_module(f"esphome.components.template.{platform}")
+    markers = _markers(mod.CONFIG_SCHEMA)
+    for field in fields:
+        assert markers[field].visibility is cv.Visibility.UI, f"{platform}.{field}"
+
+
+def test_template_sensor_promotion_preserves_defaults() -> None:
+    """Promoting to UI must not drop the fields' defaults."""
+    from esphome.components.template.sensor import CONFIG_SCHEMA
+
+    markers = _markers(CONFIG_SCHEMA)
+    assert markers["accuracy_decimals"].default() == 1
+    assert markers["force_update"].default() is False
+
+
+def test_hardware_platform_metadata_not_promoted() -> None:
+    """Without ``visibility=`` the builders leave metadata unset.
+
+    Unset markers fall through to the consumer's ``Optional`` default of
+    advanced, so hardware platforms are unaffected by the template promotion.
+    """
+    from esphome.components import binary_sensor, sensor
+
+    hw_sensor = _markers(sensor.sensor_schema(device_class="temperature"))
+    assert hw_sensor["device_class"].visibility is None
+    hw_bs = _markers(binary_sensor.binary_sensor_schema(device_class="motion"))
+    assert hw_bs["device_class"].visibility is None

tests/components/sendspin/common-hub.yaml

@@ -4,3 +4,6 @@ psram:
 sendspin:
   id: sendspin_hub_id
   task_stack_in_psram: true
+  manufacturer: Test Manufacturer
+  model: Test Model
+  firmware_version: 1.2.3

tests/components/sendspin/common-media_source.yaml

@@ -9,4 +9,3 @@ media_source:
     static_delay_adjustable: true
     fixed_delay: 480us
     decode_memory: internal
-    codecs: [pcm, opus, flac]

tests/components/serial_proxy/test-tap.esp32-idf.yaml

@@ -0,0 +1,14 @@
+substitutions:
+  tx_pin: GPIO4
+  rx_pin: GPIO5
+
+# Compile the tap code paths; no tap is attached, so this exercises the
+# null-tap branches that a normal build never defines.
+esphome:
+  platformio_options:
+    build_flags:
+      - "-DUSE_SERIAL_PROXY_TAP"
+
+packages:
+  uart: !include ../../test_build_components/common/uart/esp32-idf.yaml
+  serial_proxy: !include common.yaml

tests/components/wifi/common.yaml

@@ -14,6 +14,7 @@ esphome:
           condition: wifi.ap_active
           then:
             - logger.log: "WiFi AP is active!"
+      - wifi.roam
 
 wifi:
   networks:

tests/integration/README.md

@@ -21,6 +21,13 @@ The `yaml_config` fixture automatically loads YAML configurations based on the t
 - The fixture file must exist or the test will fail with a clear error message
 - The fixture automatically injects a dynamic port number into the API configuration
 
+Tests marked `@pytest.mark.shared_yaml("name")` load `fixtures/name.yaml` instead
+of the test-named file and compile it in a shared, hash-keyed build directory, so
+the whole group pays one full compile and each test only a relink. The marker
+argument must be a single-line string literal (CI test selection maps fixtures to
+test files by scanning for it), and marked tests must hand the `yaml_config`
+content to `run_compiled` unmodified.
+
 ### Key Fixtures
 
 - `run_compiled` - Combines write, compile, and run operations into a single context manager

tests/integration/conftest.py

@@ -4,17 +4,22 @@ from __future__ import annotations
 
 import asyncio
 from collections.abc import AsyncGenerator, Callable, Generator
-from contextlib import AbstractAsyncContextManager, asynccontextmanager
+from contextlib import AbstractAsyncContextManager, asynccontextmanager, suppress
 import fcntl
+from functools import cache
+import hashlib
 import logging
 import os
 from pathlib import Path
 import platform
+import re
+import shutil
 import signal
 import socket
 import subprocess
 import sys
 import tempfile
+import time
 from typing import TextIO
 
 from aioesphomeapi import APIClient, APIConnectionError, LogParser, ReconnectLogic
@@ -23,7 +28,13 @@ import pytest_asyncio
 
 import esphome.config
 from esphome.core import CORE
-from esphome.helpers import get_usable_cpu_count
+from esphome.helpers import (
+    get_usable_cpu_count,
+    read_file,
+    rmtree,
+    write_file,
+    write_file_if_changed,
+)
 from esphome.platformio.toolchain import get_idedata
 
 from .const import (
@@ -56,6 +67,21 @@ import pty  # not available on Windows
 pytest.register_assert_rewrite("tests.integration.entity_utils")
 
 
+def pytest_configure(config: pytest.Config) -> None:
+    config.addinivalue_line(
+        "markers",
+        "shared_yaml(name): load fixtures/<name>.yaml and compile it in a shared, "
+        "hash-keyed incremental build directory",
+    )
+
+
+FIXTURES_DIR = Path(__file__).parent / "fixtures"
+REPO_ROOT = Path(__file__).resolve().parent.parent.parent
+
+# CI caches parts of this path; keep in sync with ci.yml integration-tests.
+INTEGRATION_TESTS_ROOT = Path.home() / ".esphome-integration-tests"
+
+
 def _get_platformio_env(cache_dir: Path) -> dict[str, str]:
     """Get environment variables for PlatformIO with shared cache."""
     env = os.environ.copy()
@@ -78,7 +104,7 @@ def _get_platformio_env(cache_dir: Path) -> dict[str, str]:
         )
     # Compile with THIS tree's esphome sources, not wherever the venv's editable
     # install points (which may be a different git worktree or checkout).
-    repo_root = str(Path(__file__).resolve().parent.parent.parent)
+    repo_root = str(REPO_ROOT)
     existing = env.get("PYTHONPATH")
     env["PYTHONPATH"] = f"{repo_root}{os.pathsep}{existing}" if existing else repo_root
     return env
@@ -88,8 +114,7 @@ def _get_platformio_env(cache_dir: Path) -> dict[str, str]:
 def shared_platformio_cache() -> Generator[Path]:
     """Initialize a shared PlatformIO cache for all integration tests."""
     # Use a dedicated directory for integration tests to avoid conflicts.
-    # CI caches parts of this path; keep in sync with ci.yml integration-tests.
-    test_cache_dir = Path.home() / ".esphome-integration-tests"
+    test_cache_dir = INTEGRATION_TESTS_ROOT
     cache_dir = test_cache_dir / "platformio"
 
     # Use a lock file in the home directory to ensure only one process initializes the cache
@@ -112,7 +137,9 @@ def shared_platformio_cache() -> Generator[Path]:
                 init_dir = Path(tmpdir)
                 fixture_path = Path(__file__).parent / "fixtures" / "cache_init.yaml"
                 config_path = init_dir / "cache_init.yaml"
-                config_path.write_text(fixture_path.read_text())
+                config_path.write_text(
+                    fixture_path.read_text(encoding="utf-8"), encoding="utf-8"
+                )
 
                 # Run compilation to populate the cache
                 # We must succeed here to avoid race conditions where multiple
@@ -162,13 +189,6 @@ def integration_test_dir() -> Generator[Path]:
         yield Path(tmpdir)
 
 
-@pytest.fixture
-def isolated_preferences(monkeypatch: pytest.MonkeyPatch, tmp_path: Path) -> None:
-    """Host preferences persist per device name; give the test its own so a
-    provisioned key never leaks into another run."""
-    monkeypatch.setenv("ESPHOME_PREFDIR", str(tmp_path / "prefs"))
-
-
 @pytest.fixture
 def reserved_tcp_port() -> Generator[tuple[int, socket.socket]]:
     """Reserve an unused TCP port by holding the socket open."""
@@ -188,21 +208,29 @@ def unused_tcp_port(reserved_tcp_port: tuple[int, socket.socket]) -> int:
     return reserved_tcp_port[0]
 
 
+@pytest.fixture(autouse=True)
+def isolated_preferences(monkeypatch: pytest.MonkeyPatch, tmp_path: Path) -> Path:
+    """Give every test its own host prefs dir; prefs are keyed only by device
+    name, which tests sharing a fixture also share."""
+    prefdir = tmp_path / "prefs"
+    monkeypatch.setenv("ESPHOME_PREFDIR", str(prefdir))
+    return prefdir
+
+
 @pytest_asyncio.fixture
 async def yaml_config(request: pytest.FixtureRequest, unused_tcp_port: int) -> str:
     """Load YAML configuration based on test name."""
-    # Get the test function name
-    test_name: str = request.node.name
-    # Extract the base test name (remove test_ prefix and any parametrization)
-    base_name = test_name.replace("test_", "").partition("[")[0]
+    shared_name = _shared_yaml_name(request)
+    # Base test name: test_ prefix and any parametrization stripped
+    base_name = shared_name or request.node.name.replace("test_", "").partition("[")[0]
 
     # Load the fixture file
-    fixture_path = Path(__file__).parent / "fixtures" / f"{base_name}.yaml"
+    fixture_path = FIXTURES_DIR / f"{base_name}.yaml"
     if not fixture_path.exists():
         raise FileNotFoundError(f"Fixture file not found: {fixture_path}")
 
     loop = asyncio.get_running_loop()
-    content = await loop.run_in_executor(None, fixture_path.read_text)
+    content = await loop.run_in_executor(None, read_file, fixture_path)
 
     # Replace the port in the config if it contains api section
     if "api:" in content:
@@ -226,11 +254,13 @@ async def yaml_config(request: pytest.FixtureRequest, unused_tcp_port: int) -> s
 
     # Replace external component path placeholder if present
     if "EXTERNAL_COMPONENT_PATH" in content:
-        external_components_path = str(
-            Path(__file__).parent / "fixtures" / "external_components"
-        )
+        external_components_path = str(FIXTURES_DIR / "external_components")
         content = content.replace("EXTERNAL_COMPONENT_PATH", external_components_path)
 
+    if shared_name is not None:
+        # _compile verifies the marked test compiles this content unmodified
+        request.node._shared_yaml_content = content
+
     return content
 
 
@@ -240,24 +270,218 @@ async def write_yaml_config(
 ) -> AsyncGenerator[ConfigWriter]:
     """Write YAML configuration to a file."""
     # Get the test name for default filename
-    test_name = request.node.name
-    base_name = test_name.replace("test_", "").split("[")[0]
+    base_name = request.node.name.replace("test_", "").partition("[")[0]
 
     async def _write_config(content: str, filename: str | None = None) -> Path:
         if filename is None:
             filename = f"{base_name}.yaml"
         config_path = integration_test_dir / filename
         loop = asyncio.get_running_loop()
-        await loop.run_in_executor(None, config_path.write_text, content)
+        await loop.run_in_executor(None, write_file, config_path, content)
         return config_path
 
     yield _write_config
 
 
+# Deliberately not CI-cached (ci.yml caches only platformio/ subpaths); stale
+# dirs for a fixture are pruned when its content hash changes.
+SHARED_BUILDS_ROOT = INTEGRATION_TESTS_ROOT / "builds"
+
+# In the dir name (not just the hash) so pruning stays inside this checkout
+_REPO_KEY = hashlib.sha256(str(REPO_ROOT).encode()).hexdigest()[:8]
+
+# Give a contended shared build lock time for a full cold compile ahead of us
+_SHARED_LOCK_TIMEOUT_S = 900
+_SHARED_LOCK_POLL_S = 0.1
+_SHARED_LOCK_REPORT_S = 30
+
+# Reclaims dirs orphaned by fixture renames or deleted checkouts
+_STALE_BUILD_MAX_AGE_S = 30 * 24 * 3600
+
+# ELF path per shared build dir; constant once compiled, so resolve it only once
+_shared_elf_paths: dict[Path, Path] = {}
+
+# Dirs this process already swept; pruning is session-scoped work
+_pruned_dirs: set[Path] = set()
+
+
+def _shared_yaml_name(request: pytest.FixtureRequest) -> str | None:
+    """Name passed to the shared_yaml marker, or None when unmarked."""
+    marker = request.node.get_closest_marker("shared_yaml")
+    if marker is None:
+        return None
+    # Exactly one \w+ positional arg: the name doubles as a build dir
+    # component, and CI test selection (script/helpers.py) parses the same shape
+    if (
+        len(marker.args) != 1
+        or marker.kwargs
+        or not re.fullmatch(r"\w+", str(marker.args[0]))
+    ):
+        raise ValueError(
+            "shared_yaml marker requires exactly one \\w+ fixture name literal"
+        )
+    return marker.args[0]
+
+
+def _shared_build_prefix(name: str) -> str:
+    return f"{name}-{_REPO_KEY}-"
+
+
+@cache
+def _shared_build_dir(name: str) -> Path:
+    """Dir keyed by checkout and fixture source, before per-test injections."""
+    key = hashlib.sha256((FIXTURES_DIR / f"{name}.yaml").read_bytes()).hexdigest()[:16]
+    return SHARED_BUILDS_ROOT / (_shared_build_prefix(name) + key)
+
+
+def _read_stamp(stamp: Path, shared_dir: Path) -> Path | None:
+    """ELF path recorded by the last completed compile, or None."""
+    try:
+        text = stamp.read_text(encoding="utf-8").strip()
+    except FileNotFoundError:
+        return None
+    except OSError as err:
+        print(f"Cannot read {stamp}: {err}")
+        return None
+    if not text:
+        print(f"Ignoring empty stamp {stamp}")
+        return None
+    built = Path(text)
+    # Never trust a stamp pointing outside its own build dir as an unlink target
+    if shared_dir.resolve() in built.resolve().parents:
+        return built
+    print(f"Ignoring stamp {stamp} pointing outside {shared_dir}")
+    return None
+
+
+def _unused_since(stale: Path, cutoff: float) -> bool:
+    """Whether a build dir looks untouched since cutoff; unknown counts as used."""
+    # Newest of the .built stamp (rewritten by every completed compile) and the
+    # dir itself (freshened by a worker claiming the dir before locking)
+    newest: float | None = None
+    for probe in (stale / ".built", stale):
+        try:
+            mtime = probe.stat().st_mtime
+        except FileNotFoundError:
+            continue
+        except NotADirectoryError:
+            return True  # a stray file where a dir should be; reclaimable
+        except OSError as err:
+            print(f"Cannot age-probe {stale}: {err}")
+            return False  # unknown never authorizes deletion
+        newest = mtime if newest is None else max(newest, mtime)
+    return newest is not None and newest < cutoff
+
+
+def _prune_stale_builds(name: str, keep: Path) -> None:
+    """Remove outdated build dirs (blocking, run in executor): this checkout's
+    other dirs for the fixture, plus anything untouched for 30 days. Tolerates
+    other workers pruning the same dirs concurrently."""
+    cutoff = time.time() - _STALE_BUILD_MAX_AGE_S
+    prefix = _shared_build_prefix(name)
+    for stale in SHARED_BUILDS_ROOT.iterdir():
+        if stale == keep:
+            continue
+        same_fixture = stale.name.startswith(prefix)
+        if not same_fixture and not _unused_since(stale, cutoff):
+            continue
+        # Creating .lock bumps the dir mtime, so remember whether the re-probe
+        # under the lock can trust it
+        lock_preexisting = (stale / ".lock").exists()
+        try:
+            lock_file = (stale / ".lock").open("w")
+        except FileNotFoundError:
+            continue  # pruned by another worker meanwhile
+        except NotADirectoryError:
+            print(f"Removing stray file {stale}")
+            stale.unlink(missing_ok=True)
+            continue
+        except OSError as err:
+            print(f"Cannot prune {stale}: {err}")
+            continue
+        with lock_file:
+            try:
+                fcntl.flock(lock_file.fileno(), fcntl.LOCK_EX | fcntl.LOCK_NB)
+            except BlockingIOError:
+                continue  # still in use by another run
+            # Re-probe under the lock: a worker freshens its dir before
+            # locking, so a just-claimed dir no longer looks unused. A dir
+            # whose .lock we just created cannot be held by anyone, and our
+            # own open bumped its mtime, so its pre-open probe stands
+            if (
+                lock_preexisting
+                and not same_fixture
+                and not _unused_since(stale, cutoff)
+            ):
+                continue
+            # rmtree tolerates races; a leftover partial tree only costs a
+            # rebuild, since the ELF is deleted before every compile
+            try:
+                rmtree(stale)
+            except OSError as err:
+                print(f"Failed to prune {stale}: {err}")
+
+
+async def _run_esphome_compile(
+    config_path: Path, cwd: Path, env: dict[str, str]
+) -> None:
+    """Run `esphome compile`, retrying up to 3 times on a segfault."""
+    max_retries = 3
+    for attempt in range(max_retries):
+        # Compile using subprocess, inheriting stdout/stderr to show progress
+        proc = await asyncio.create_subprocess_exec(
+            sys.executable,
+            "-m",
+            "esphome",
+            "compile",
+            str(config_path),
+            cwd=cwd,
+            stdout=None,  # Inherit stdout
+            stderr=None,  # Inherit stderr
+            stdin=asyncio.subprocess.DEVNULL,
+            # Start in a new process group to isolate signal handling
+            start_new_session=True,
+            env=env,
+            close_fds=False,
+        )
+        await proc.wait()
+
+        if proc.returncode == 0:
+            break
+        if proc.returncode == -11 and attempt < max_retries - 1:
+            # Segfault (-11 = SIGSEGV), retry
+            print(
+                f"Compilation segfaulted (attempt {attempt + 1}/{max_retries}), retrying..."
+            )
+            await asyncio.sleep(1)  # Brief pause before retry
+            continue
+        raise RuntimeError(
+            f"Failed to compile {config_path}, return code: {proc.returncode}. "
+            f"Run with 'pytest -s' to see compilation output."
+        )
+
+
+def _resolve_compiled_binary(config_path: Path) -> Path:
+    """Load the config to learn the compiled ELF path (blocking, run in executor)."""
+    CORE.reset()  # Reset CORE state between test runs
+    CORE.config_path = config_path
+    config = esphome.config.read_config(
+        {"command": "compile", "config": str(config_path)}
+    )
+    if config is None:
+        raise RuntimeError(f"Failed to read config from {config_path}")
+    idedata = get_idedata(config)
+    binary_path = Path(idedata.firmware_elf_path)
+    if not binary_path.exists():
+        raise RuntimeError(f"Compiled binary not found at {binary_path}")
+    return binary_path
+
+
 @pytest_asyncio.fixture
 async def compile_esphome(
     integration_test_dir: Path,
     shared_platformio_cache: Path,
+    request: pytest.FixtureRequest,
 ) -> AsyncGenerator[CompileFunction]:
     """Compile an ESPHome configuration and return the binary path."""
 
@@ -265,66 +489,96 @@ async def compile_esphome(
         # Use the shared PlatformIO cache for faster compilation
         # This avoids re-downloading dependencies for each test
         env = _get_platformio_env(shared_platformio_cache)
-
-        # Retry compilation up to 3 times if we get a segfault
-        max_retries = 3
-        for attempt in range(max_retries):
-            # Compile using subprocess, inheriting stdout/stderr to show progress
-            proc = await asyncio.create_subprocess_exec(
-                sys.executable,
-                "-m",
-                "esphome",
-                "compile",
-                str(config_path),
-                cwd=integration_test_dir,
-                stdout=None,  # Inherit stdout
-                stderr=None,  # Inherit stderr
-                stdin=asyncio.subprocess.DEVNULL,
-                # Start in a new process group to isolate signal handling
-                start_new_session=True,
-                env=env,
-                close_fds=False,
-            )
-            await proc.wait()
-
-            if proc.returncode == 0:
-                # Success!
-                break
-            if proc.returncode == -11 and attempt < max_retries - 1:
-                # Segfault (-11 = SIGSEGV), retry
-                print(
-                    f"Compilation segfaulted (attempt {attempt + 1}/{max_retries}), retrying..."
-                )
-                await asyncio.sleep(1)  # Brief pause before retry
-                continue
-            # Other error or final retry
-            raise RuntimeError(
-                f"Failed to compile {config_path}, return code: {proc.returncode}. "
-                f"Run with 'pytest -s' to see compilation output."
-            )
-
-        # Load the config to get idedata (blocking call, must use executor)
         loop = asyncio.get_running_loop()
 
-        def _read_config_and_get_binary():
-            CORE.reset()  # Reset CORE state between test runs
-            CORE.config_path = config_path
-            config = esphome.config.read_config(
-                {"command": "compile", "config": str(config_path)}
+        name = _shared_yaml_name(request)
+        if name is None:
+            await _run_esphome_compile(config_path, integration_test_dir, env)
+            return await loop.run_in_executor(
+                None, _resolve_compiled_binary, config_path
             )
-            if config is None:
-                raise RuntimeError(f"Failed to read config from {config_path}")
 
-            # Get the compiled binary path
-            idedata = get_idedata(config)
-            return Path(idedata.firmware_elf_path)
-
-        binary_path = await loop.run_in_executor(None, _read_config_and_get_binary)
-
-        if not binary_path.exists():
-            raise RuntimeError(f"Compiled binary not found at {binary_path}")
-
-        return binary_path
+        # Shared fixture: build in a hash-keyed dir so tests sharing a config
+        # pay one full compile and later only a main.cpp (port) rebuild + relink
+        shared_dir = _shared_build_dir(name)
+        shared_dir.mkdir(parents=True, exist_ok=True)
+        # Freshen the dir before locking so a concurrent age sweep, which
+        # re-probes under the lock, never reaps a dir a worker just claimed;
+        # if a peer reaped it already, the guarded lock open recreates it
+        with suppress(FileNotFoundError):
+            os.utime(shared_dir)
+        if shared_dir not in _pruned_dirs:
+            _pruned_dirs.add(shared_dir)
+            await loop.run_in_executor(None, _prune_stale_builds, name, shared_dir)
+        shared_config = shared_dir / f"{name}.yaml"
+        private_binary = integration_test_dir / f"{name}.elf"
+        content = await loop.run_in_executor(None, read_file, config_path)
+        if content != getattr(request.node, "_shared_yaml_content", None):
+            # The dir is keyed by the fixture source; a mutated config would be
+            # cached under a hash that does not describe it
+            raise RuntimeError(
+                "shared_yaml tests must compile the yaml_config content unmodified"
+            )
+        # flock serializes concurrent xdist workers; closing the fd releases it.
+        # Hand-rolled rather than filelock.FileLock: non-blocking retries keep
+        # the wait cancellable, while a blocking acquire in an executor thread
+        # would survive test cancellation holding the fd
+        try:
+            lock_file = (shared_dir / ".lock").open("w")
+        except FileNotFoundError:
+            # A peer run pruning divergent hashes reaped the dir between our
+            # mkdir and this open; recreate it and pay a full rebuild
+            shared_dir.mkdir(parents=True, exist_ok=True)
+            lock_file = (shared_dir / ".lock").open("w")
+        with lock_file:
+            start = time.monotonic()
+            last_report = start
+            while True:
+                try:
+                    fcntl.flock(lock_file.fileno(), fcntl.LOCK_EX | fcntl.LOCK_NB)
+                    break
+                except BlockingIOError:
+                    now = time.monotonic()
+                    if now - start > _SHARED_LOCK_TIMEOUT_S:
+                        raise RuntimeError(
+                            f"Timed out waiting for the {shared_dir} lock"
+                        ) from None
+                    if now - last_report >= _SHARED_LOCK_REPORT_S:
+                        last_report = now
+                        print(
+                            f"Waited {now - start:.0f}s for another worker's "
+                            f"build of {shared_dir.name}"
+                        )
+                    await asyncio.sleep(_SHARED_LOCK_POLL_S)
+            # .built carries the ELF path of the last completed compile, so
+            # later workers skip the config re-read in _resolve_compiled_binary
+            stamp = shared_dir / ".built"
+            if (built := _shared_elf_paths.get(shared_dir)) is None:
+                built = await loop.run_in_executor(None, _read_stamp, stamp, shared_dir)
+            # Delete the ELF before compiling: whatever exists afterwards is
+            # this compile's output, so no staleness check is ever needed.
+            # With no usable stamp, sweep any leftover at the known layout
+            if built is not None:
+                built.unlink(missing_ok=True)
+            else:
+                # Layout-agnostic: ESPHOME_BUILD_PATH can move the build tree
+                for leftover in shared_dir.rglob("program"):
+                    if leftover.is_file():
+                        leftover.unlink()
+            await loop.run_in_executor(
+                None, write_file_if_changed, shared_config, content
+            )
+            await _run_esphome_compile(shared_config, shared_dir, env)
+            if built is None or not built.exists():
+                built = await loop.run_in_executor(
+                    None, _resolve_compiled_binary, shared_config
+                )
+            _shared_elf_paths[shared_dir] = built
+            await loop.run_in_executor(None, write_file, stamp, str(built))
+            # Copy out before unlocking: another worker may relink firmware.elf
+            # while this test is still running its private copy
+            await loop.run_in_executor(None, shutil.copy2, built, private_binary)
+        return private_binary
 
     yield _compile
 

tests/integration/fixtures/sensor_filters_batch_window.yaml

@@ -1,58 +0,0 @@
-esphome:
-  name: test-batch-window-filters
-
-host:
-api:
-  batch_delay: 0ms  # Disable batching to receive all state updates
-logger:
-  level: DEBUG
-
-# Template sensor that we'll use to publish values
-sensor:
-  - platform: template
-    name: "Source Sensor"
-    id: source_sensor
-    accuracy_decimals: 2
-
-  # Batch window filters (window_size == send_every) - use streaming filters
-  - platform: copy
-    source_id: source_sensor
-    name: "Min Sensor"
-    id: min_sensor
-    filters:
-      - min:
-          window_size: 5
-          send_every: 5
-          send_first_at: 1
-
-  - platform: copy
-    source_id: source_sensor
-    name: "Max Sensor"
-    id: max_sensor
-    filters:
-      - max:
-          window_size: 5
-          send_every: 5
-          send_first_at: 1
-
-  - platform: copy
-    source_id: source_sensor
-    name: "Moving Avg Sensor"
-    id: moving_avg_sensor
-    filters:
-      - sliding_window_moving_average:
-          window_size: 5
-          send_every: 5
-          send_first_at: 1
-
-# Button to trigger publishing test values
-button:
-  - platform: template
-    name: "Publish Values Button"
-    id: publish_button
-    on_press:
-      - lambda: |-
-          // Publish 10 values: 1.0, 2.0, ..., 10.0
-          for (int i = 1; i <= 10; i++) {
-            id(source_sensor).publish_state(float(i));
-          }

tests/integration/fixtures/uart_mock_modbus_client_read_write.yaml

@@ -1,111 +0,0 @@
-esphome:
-  name: uart-mock-modbus-cli-rw
-
-host:
-api:
-logger:
-  level: VERBOSE
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
-# The actual UART bus used is the uart_mock component below
-uart:
-  baud_rate: 115200
-  port: /dev/null
-
-# Two virtual buses looped back to each other: the client's transmissions reach the server and the
-# server's replies reach the client. auto_start so forwarding is active before the button fires.
-uart_mock:
-  - id: virtual_uart_server
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_client
-              data: !lambda return data;
-  - id: virtual_uart_client
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_server
-              data: !lambda return data;
-
-globals:
-  - id: stored_1
-    type: uint16_t
-    initial_value: "0"
-
-modbus:
-  - uart_id: virtual_uart_server
-    id: virtual_modbus_server
-    role: server
-  - uart_id: virtual_uart_client
-    id: virtual_modbus_client
-    role: client
-    turnaround_time: 10ms
-
-modbus_server:
-  - address: 1
-    modbus_id: virtual_modbus_server
-    registers:
-      # Writable + readable register: the read publishes what it returns, so the test can confirm the
-      # write half of the 0x17 ran before the read half (Modbus 6.17).
-      - address: 0x01
-        value_type: U_WORD
-        read_lambda: |-
-          id(srv_read_1).publish_state(id(stored_1));
-          return id(stored_1);
-        write_lambda: |-
-          id(stored_1) = x;
-          id(srv_write_1).publish_state(x);
-          return true;
-      # Read-only register, returned together with 0x01 by the 2-register read half.
-      - address: 0x02
-        value_type: U_WORD
-        read_lambda: return 0x00AA;
-
-sensor:
-  # Server-side observations.
-  - platform: template
-    name: "srv_write_1"
-    id: srv_write_1
-  - platform: template
-    name: "srv_read_1"
-    id: srv_read_1
-  # Client-side read-back: the values the client's on_response received.
-  - platform: template
-    name: "client_read_0"
-    id: client_read_0
-  - platform: template
-    name: "client_read_1"
-    id: client_read_1
-
-button:
-  - platform: template
-    name: "Start Scenario"
-    id: start_scenario_btn
-    on_press:
-      # FC 0x17: write reg 0x0001 = 0x1234, then read regs 0x0001..0x0002 back in the same transaction.
-      - modbus_client.read_write_multiple_registers:
-          address: 0x01
-          read_address: 0x0001
-          read_count: 2
-          write_address: 0x0001
-          values: [0x1234]
-          on_response:
-            then:
-              - lambda: |-
-                  // values is the read-back block: reg 0x0001 (must be the just-written 0x1234) and reg 0x0002.
-                  if (values.size() >= 2) {
-                    id(client_read_0).publish_state(values[0]);
-                    id(client_read_1).publish_state(values[1]);
-                  }

tests/integration/fixtures/uart_mock_modbus_custom_pdu.yaml

@@ -1,88 +0,0 @@
-esphome:
-  name: uart-mock-modbus-custom-pdu
-
-host:
-api:
-logger:
-  level: VERBOSE
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
-# The actual UART bus used is the uart_mock component below
-uart:
-  baud_rate: 115200
-  port: /dev/null
-
-uart_mock:
-  - id: virtual_uart_server
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_controller
-              data: !lambda return data;
-  - id: virtual_uart_controller
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_server
-              data: !lambda return data;
-
-modbus:
-  - uart_id: virtual_uart_server
-    id: virtual_modbus_server
-    role: server
-  - uart_id: virtual_uart_controller
-    id: virtual_modbus_controller
-    role: client
-    turnaround_time: 10ms
-
-modbus_controller:
-  - address: 1
-    modbus_id: virtual_modbus_controller
-    id: modbus_controller_1
-    update_interval: 1s
-
-modbus_server:
-  - address: 1
-    modbus_id: virtual_modbus_server
-    id: modbus_server_1
-    registers:
-      - address: 0x01
-        value_type: U_WORD
-        read_lambda: return 259;
-
-sensor:
-  # Plain read to confirm the controller <-> server link is up.
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "plain_read"
-    address: 0x01
-    register_type: holding
-    value_type: U_WORD
-  # Custom PDU: read holding register 0x0001, count 1. The PDU is
-  # {function code, address hi, address lo, count hi, count lo}; the device
-  # address and CRC are added by the hub. The lambda parses the response payload
-  # (the register value, big-endian).
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "custom_read"
-    custom_pdu: [0x03, 0x00, 0x01, 0x00, 0x01]
-    lambda: |-
-      if (data.size() < 2) return {};
-      return (float) ((data[0] << 8) | data[1]);
-
-button:
-  - platform: template
-    name: "Start Scenario"
-    id: start_scenario_btn
-    # This test does not have anything to start (mock is autostart)

tests/integration/fixtures/uart_mock_modbus_deprecated_write_buffer.yaml

@@ -1,106 +0,0 @@
-esphome:
-  name: uart-mock-modbus-dep-buffer
-
-host:
-api:
-logger:
-  level: VERBOSE
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
-# The actual UART bus used is the uart_mock component below
-uart:
-  baud_rate: 115200
-  port: /dev/null
-
-uart_mock:
-  - id: virtual_uart_server
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_controller
-              data: !lambda return data;
-  - id: virtual_uart_controller
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_server
-              data: !lambda return data;
-
-globals:
-  - id: reg10
-    type: uint16_t
-    initial_value: "0"
-
-modbus:
-  - uart_id: virtual_uart_server
-    id: virtual_modbus_server
-    role: server
-  - uart_id: virtual_uart_controller
-    id: virtual_modbus_controller
-    role: client
-    turnaround_time: 10ms
-
-modbus_controller:
-  - address: 1
-    modbus_id: virtual_modbus_controller
-    id: modbus_controller_1
-    update_interval: 1s
-
-modbus_server:
-  - address: 1
-    modbus_id: virtual_modbus_server
-    id: modbus_server_1
-    registers:
-      - address: 0x10
-        value_type: U_WORD
-        read_lambda: return id(reg10);
-        write_lambda: |-
-          id(reg10) = x;
-          return true;
-
-# A number whose write_lambda uses the DEPRECATED buffer parameter (fills `payload` with a legacy raw
-# frame as words: device address + function code + data) instead of the new item->write_* API. The write
-# must still land with its legacy semantics, and the one-time deprecation warning must fire only once per
-# entity no matter how many writes happen.
-number:
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "buf_number"
-    id: buf_number
-    address: 0x10
-    register_type: holding
-    value_type: U_WORD
-    min_value: 0
-    max_value: 1000
-    step: 1
-    write_lambda: |-
-      // Legacy raw frame as words: [addr 0x01 | fc 0x06], register 0x0010, value.
-      payload.push_back(0x0106);
-      payload.push_back(0x0010);
-      payload.push_back((uint16_t) x);
-      return {};
-
-# Reports the server-side register so the test can observe that the deprecated buffer write landed.
-sensor:
-  - platform: template
-    name: "written_value"
-    id: written_value
-    update_interval: 0.5s
-    lambda: "return id(reg10);"
-
-button:
-  - platform: template
-    name: "Start Scenario"
-    id: start_scenario_btn
-    # The test drives the writes via number_command; the mock is autostart.

tests/integration/fixtures/uart_mock_modbus_lambda_invert.yaml

@@ -1,95 +0,0 @@
-esphome:
-  name: uart-mock-modbus-lambda-invert
-
-host:
-api:
-logger:
-  level: VERBOSE
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
-# The actual UART bus used is the uart_mock component below
-uart:
-  baud_rate: 115200
-  port: /dev/null
-
-uart_mock:
-  - id: virtual_uart_server
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_controller
-              data: !lambda return data;
-  - id: virtual_uart_controller
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_server
-              data: !lambda return data;
-
-globals:
-  - id: reg40
-    type: uint16_t
-    initial_value: "5"
-
-modbus:
-  - uart_id: virtual_uart_server
-    id: virtual_modbus_server
-    role: server
-  - uart_id: virtual_uart_controller
-    id: virtual_modbus_controller
-    role: client
-    turnaround_time: 10ms
-
-modbus_controller:
-  - address: 1
-    modbus_id: virtual_modbus_controller
-    id: modbus_controller_1
-    update_interval: 1s
-
-modbus_server:
-  - address: 1
-    modbus_id: virtual_modbus_server
-    id: modbus_server_1
-    registers:
-      - address: 0x40
-        value_type: U_WORD
-        read_lambda: return id(reg40);
-        write_lambda: id(reg40) = x; return true;
-
-# An active-low holding switch: the write_lambda inverts the wire value, but the entity must still
-# report the REQUESTED state. assumed_state keeps the register unpolled, so the published state comes
-# only from write_state() - turning ON writes 0x0000 yet the switch shows ON.
-switch:
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "invert_switch"
-    register_type: holding
-    address: 0x40
-    assumed_state: true
-    write_lambda: |-
-      return !x;
-
-sensor:
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "reg_40"
-    address: 0x40
-    register_type: holding
-    value_type: U_WORD
-
-button:
-  - platform: template
-    name: "Start Scenario"
-    id: start_scenario_btn
-    # This test does not have anything to start (mock is autostart)