Note which inflate session fields are borrowed

Also patch the compressor through the module under test rather than
the shared zlib module.

.github/workflows/ci.yml

@@ -244,11 +244,20 @@ jobs:
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+      - name: Read prek version from requirements_test.txt
+        id: prek
+        # requirements_test.txt is the only place the version is pinned, so a
+        # Dependabot bump there is picked up here without a second edit.
+        run: |
+          if ! version=$(sed -nE 's/^prek==([^[:space:]#]+).*/\1/p' requirements_test.txt) || [ -z "$version" ]; then
+            echo "::error::No prek== pin found in requirements_test.txt."
+            exit 1
+          fi
+          echo "version=$version" >> "$GITHUB_OUTPUT"
       - name: Run prek
         uses: j178/prek-action@4e14d07f9231acabce116ccfca13b13dd9755ece # v3.0.0
         with:
-          # Keep in sync with requirements_test.txt.
+          prek-version: ${{ steps.prek.outputs.version }}
-          prek-version: "0.4.11"
           # This job only runs on pull requests, so nothing ever populates
           # the cache on dev. Every run would miss and then write a per-pull
           # request copy, which is what the old seed-cache job existed to

.github/workflows/sync-dependency-versions.yml

@@ -0,0 +1,94 @@
+# Keeps pre-commit hook revs in sync with the requirements files.
+#
+# Dependabot only bumps the pins in requirements*.txt. Some of those tools
+# are pinned again as hook revs in .pre-commit-config.yaml. This workflow
+# runs script/sync_dependency_versions.py against the pull request branch
+# and pushes a commit with the revs updated.
+
+name: Sync dependency versions
+
+on:
+  # pull_request_target rather than pull_request so the App secret is
+  # available on Dependabot pull requests (pull_request runs opened by
+  # Dependabot only see Dependabot secrets). The job below only touches
+  # branches in this repository and only ever executes the script from the
+  # base branch checkout, so fork code never runs with the token.
+  pull_request_target:
+    types: [opened, synchronize, reopened]
+    paths:
+      - requirements_dev.txt
+      - requirements_test.txt
+      - .pre-commit-config.yaml
+      - script/sync_dependency_versions.py
+
+# The push to the pull request branch uses the App token minted below, so
+# the workflow's GITHUB_TOKEN does not need any scopes.
+permissions: {}
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
+  cancel-in-progress: true
+
+jobs:
+  sync:
+    name: Sync pinned versions
+    runs-on: ubuntu-latest
+    # Same-repository branches only: a push to a fork is not possible with
+    # this token, and it keeps untrusted heads out of a privileged job.
+    if: >-
+      github.repository == 'esphome/esphome'
+      && github.event.pull_request.head.repo.full_name == github.repository
+    steps:
+      - name: Generate a token
+        id: generate-token
+        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
+        with:
+          client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
+          private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
+          # A push made with the workflow's own GITHUB_TOKEN would not start
+          # CI on the new commit; a push with the App token does.
+          permission-contents: write  # git push of the sync commit to the pull request branch
+
+      - name: Check out base branch
+        # Provides the script that runs below. Deliberately the base branch
+        # so the pull request cannot change what executes here.
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+        with:
+          ref: ${{ github.event.pull_request.base.sha }}
+          persist-credentials: false
+
+      - name: Check out pull request branch
+        # No allow-unsafe-pr-checkout here on purpose: checkout v7 only
+        # refuses heads that live in a different repository, and the job
+        # condition above already limits runs to same-repository branches.
+        # Leaving it off keeps that refusal as a backstop for fork heads.
+        uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
+        with:
+          ref: ${{ github.event.pull_request.head.ref }}
+          path: pull-request
+          token: ${{ steps.generate-token.outputs.token }}
+
+      - name: Set up Python
+        uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97 # v7.0.0
+        with:
+          python-version: "3.12"
+
+      - name: Install yamlrocks
+        # The script edits YAML through yamlrocks. Take the pin from the
+        # base branch requirements so this workflow has no copy of its own.
+        run: pip install "$(grep -E '^yamlrocks==' requirements_test.txt | cut -d'#' -f1)"
+
+      - name: Sync pinned versions
+        run: python script/sync_dependency_versions.py --root pull-request
+
+      - name: Push changes
+        working-directory: pull-request
+        run: |
+          if git diff --quiet; then
+            echo "All pinned versions already match the requirements files."
+            exit 0
+          fi
+          git config user.name "esphome[bot]"
+          git config user.email "115708604+esphome[bot]@users.noreply.github.com"
+          git commit -am "Sync pinned tool versions with requirements files"
+          git push

.pre-commit-config.yaml

@@ -1,7 +1,6 @@
 ---
 # See https://pre-commit.com for more information
 # See https://pre-commit.com/hooks.html for more hooks
-
 ci:
   autoupdate_commit_msg: 'pre-commit: autoupdate'
   autoupdate_schedule: off  # Disabled until ruff versions are synced between deps and pre-commit
@@ -11,7 +10,7 @@ ci:
 repos:
   - repo: https://github.com/astral-sh/ruff-pre-commit
     # Ruff version.
-    rev: v0.16.3
+    rev: v0.16.6
     hooks:
       # Run the linter.
       - id: ruff
@@ -42,7 +41,7 @@ repos:
       - id: pyupgrade
         args: [--py312-plus]
   - repo: https://github.com/adrienverge/yamllint.git
-    rev: v1.37.1
+    rev: v1.38.0
     hooks:
       - id: yamllint
         exclude: ^(\.clang-format|\.clang-tidy)$

AGENTS.md

@@ -840,7 +840,7 @@ file does, and it is the authority when they disagree. The most useful starting
         cv.rename_key(
             CONF_OLD_KEY, CONF_NEW_KEY, removed_in="2026.6.0", component="my_component"
         ),
-        cv.Schema({ ... }),
+        cv.Schema({...}),
     )
     ```
     For other deprecations, warn manually during validation:

docker/Dockerfile

@@ -22,7 +22,7 @@ RUN \
     -r /requirements.txt
 
 # Install the ESPHome Device Builder dashboard.
-RUN uv pip install --no-cache-dir esphome-device-builder==1.14.4
+RUN uv pip install --no-cache-dir esphome-device-builder==1.14.5
 
 RUN \
     platformio settings set enable_telemetry No \

esphome/__main__.py

@@ -1289,10 +1289,9 @@ def _choose_ota_platform(config: ConfigType, requested: str | None) -> str:
     The native API uses challenge-response auth with MD5/SHA256 hashing of a
     server-issued nonce, so the password is never sent over the wire; the
     ``web_server`` path uses HTTP Basic auth which transmits credentials in
-    cleartext over the LAN. (The native path also supports gzip compression
+    cleartext over the LAN. (The native path also compresses the upload:
-    on ESP8266, where flash space is tight; on ESP32/RP2040/LibreTiny the
+    gzip on ESP8266 and RP2040, which inflate it at reboot, and a deflate
-    backend reports ``supports_compression() == false`` and the firmware is
+    stream on ESP32/LibreTiny, which inflate it as it arrives.) Falls back to
-    sent uncompressed regardless of which platform is used.) Falls back to
     ``web_server`` only when that is the only available platform.
     """
     # Use a dict (insertion-ordered) instead of a list so error messages and

esphome/api_client.py

@@ -23,9 +23,7 @@ from esphome.util import safe_print
 if TYPE_CHECKING:
     from collections.abc import Callable
 
-    from aioesphomeapi.api_pb2 import (
+    from aioesphomeapi.api_pb2 import SubscribeLogsResponse  # pylint: disable=no-name-in-module
-        SubscribeLogsResponse,  # pylint: disable=no-name-in-module
-    )
 
 
 _LOGGER = logging.getLogger(__name__)

esphome/components/anova/anova.cpp

@@ -13,7 +13,7 @@ void Anova::dump_config() { LOG_CLIMATE("", "Anova BLE Cooker", this); }
 
 void Anova::setup() {
   this->codec_ = make_unique<AnovaCodec>();
-  this->current_request_ = 0;
+  this->poll_step_ = PollStep::IDLE;
 }
 
 void Anova::loop() {
@@ -22,6 +22,15 @@ void Anova::loop() {
   this->disable_loop();
 }
 
+void Anova::write_request_(AnovaPacket *pkt) {
+  auto status =
+      esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
+                               pkt->length, pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
+  if (status) {
+    ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str(), status);
+  }
+}
+
 void Anova::control(const ClimateCall &call) {
   auto mode_val = call.get_mode();
   if (mode_val.has_value()) {
@@ -38,22 +47,11 @@ void Anova::control(const ClimateCall &call) {
         ESP_LOGW(TAG, "Unsupported mode: %d", mode);
         return;
     }
-    auto status =
+    this->write_request_(pkt);
-        esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
-                                 pkt->length, pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-    if (status) {
-      ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str(), status);
-    }
   }
   auto target_temp = call.get_target_temperature();
   if (target_temp.has_value()) {
-    auto *pkt = this->codec_->get_set_target_temp_request(*target_temp);
+    this->write_request_(this->codec_->get_set_target_temp_request(*target_temp));
-    auto status =
-        esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
-                                 pkt->length, pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-    if (status) {
-      ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str(), status);
-    }
   }
 }
 
@@ -62,6 +60,7 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
     case ESP_GATTC_DISCONNECT_EVT: {
       this->current_temperature = NAN;
       this->target_temperature = NAN;
+      this->poll_step_ = PollStep::IDLE;
       this->publish_state();
       break;
     }
@@ -83,8 +82,8 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
     }
     case ESP_GATTC_REG_FOR_NOTIFY_EVT: {
       this->node_state = espbt::ClientState::ESTABLISHED;
-      this->current_request_ = 0;
+      this->poll_step_ = PollStep::IDLE;
-      this->update();
+      this->update();  // begin the first poll cycle immediately
       break;
     }
     case ESP_GATTC_NOTIFY_EVT: {
@@ -101,33 +100,30 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
         this->mode = this->codec_->running_ ? climate::CLIMATE_MODE_HEAT : climate::CLIMATE_MODE_OFF;
       }
       if (this->codec_->has_unit()) {
-        this->fahrenheit_ = (this->codec_->unit_ == 'f');
+        ESP_LOGD(TAG, "Anova units is %s", (this->codec_->unit_ == 'f') ? "fahrenheit" : "celsius");
-        ESP_LOGD(TAG, "Anova units is %s", this->fahrenheit_ ? "fahrenheit" : "celsius");
-        this->current_request_++;
       }
       this->publish_state();
 
-      if (this->current_request_ > 1) {
+      // Advance the poll cycle to its next request based on the reply we got.
-        AnovaPacket *pkt = nullptr;
+      switch (this->poll_step_) {
-        switch (this->current_request_++) {
+        case PollStep::SET_UNIT:
-          case 2:
+          this->poll_step_ = PollStep::STATUS;
-            pkt = this->codec_->get_read_target_temp_request();
+          this->write_request_(this->codec_->get_read_device_status_request());
-            break;
+          break;
-          case 3:
+        case PollStep::STATUS:
-            pkt = this->codec_->get_read_current_temp_request();
+          this->poll_step_ = PollStep::TARGET;
-            break;
+          this->write_request_(this->codec_->get_read_target_temp_request());
-          default:
+          break;
-            this->current_request_ = 1;
+        case PollStep::TARGET:
-            break;
+          this->poll_step_ = PollStep::CURRENT;
-        }
+          this->write_request_(this->codec_->get_read_current_temp_request());
-        if (pkt != nullptr) {
+          break;
-          auto status =
+        case PollStep::CURRENT:
-              esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
+          this->poll_step_ = PollStep::IDLE;  // full cycle complete
-                                       pkt->length, pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
+          break;
-          if (status) {
+        default:
-            ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str(), status);
+          // A reply to an ad-hoc control() write, outside a managed cycle.
-          }
+          break;
-        }
       }
       break;
     }
@@ -136,27 +132,26 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
   }
 }
 
-void Anova::set_unit_of_measurement(const char *unit) { this->fahrenheit_ = !strncmp(unit, "f", 1); }
+void Anova::set_unit_of_measurement(const char *unit) { this->want_fahrenheit_ = !strncmp(unit, "f", 1); }
 
 void Anova::update() {
   if (this->node_state != espbt::ClientState::ESTABLISHED)
     return;
-
+  if (this->poll_step_ != PollStep::IDLE) {
-  if (this->current_request_ < 2) {
+    // The previous cycle never finished within a full polling interval -- a
-    AnovaPacket *pkt;
+    // reply was missed or a write failed. Restart the cycle rather than stall;
-    if (this->current_request_ == 0) {
+    // the polling interval itself acts as the timeout. A late reply from the
-      pkt = this->codec_->get_set_unit_request(this->fahrenheit_ ? 'f' : 'c');
+    // abandoned cycle is harmless: state decoding happens on every notify
-    } else {
+    // regardless of step, and each notify sends at most one follow-up request.
-      pkt = this->codec_->get_read_device_status_request();
+    ESP_LOGW(TAG, "[%s] Poll cycle incomplete (step %u); restarting cycle", this->parent_->address_str(),
-    }
+             static_cast<uint8_t>(this->poll_step_));
-    auto status =
-        esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
-                                 pkt->length, pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-    if (status) {
-      ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str(), status);
-    }
-    this->current_request_++;
   }
+  // Re-assert the configured unit at the start of every poll cycle, then fall
+  // through the status/temperature reads via the notification handler. Always
+  // command the configured unit (want_fahrenheit_) -- never the last value the
+  // device reported, or a drift to 'c' would lock itself in.
+  this->poll_step_ = PollStep::SET_UNIT;
+  this->write_request_(this->codec_->get_set_unit_request(this->want_fahrenheit_ ? 'f' : 'c'));
 }
 
 }  // namespace esphome::anova

esphome/components/anova/anova.h

@@ -37,11 +37,20 @@ class Anova final : public climate::Climate, public esphome::ble_client::BLEClie
   void set_unit_of_measurement(const char *unit);
 
  protected:
+  // A poll cycle re-asserts the configured unit, then reads device state.
+  // Re-asserting every cycle prevents the cooker from silently reverting to
+  // its default (Celsius); previously the unit was only set once on
+  // connection, so a drift persisted (and corrupted the F/C interpretation of
+  // subsequent readings) until the BLE link was re-established.
+  enum class PollStep : uint8_t { SET_UNIT, STATUS, TARGET, CURRENT, IDLE };
+
+  void write_request_(AnovaPacket *pkt);
+
   std::unique_ptr<AnovaCodec> codec_;
   void control(const climate::ClimateCall &call) override;
   uint16_t char_handle_;
-  uint8_t current_request_;
+  bool want_fahrenheit_{true};  // configured target unit; never overwritten by device replies
-  bool fahrenheit_;
+  PollStep poll_step_{PollStep::IDLE};
 };
 
 }  // namespace esphome::anova

esphome/components/api/api_connection.cpp

@@ -2255,12 +2255,7 @@ bool APIConnection::send_message_(uint32_t payload_size, uint16_t message_type,
   // Capacity reserved above, cannot fail
   (void) shared_buf.resize(write_start + payload_size);
   ProtoWriteBuffer buffer{&shared_buf, write_start};
-  uint8_t *end = encode_fn(msg, buffer PROTO_ENCODE_DEBUG_INIT(&shared_buf));
+  encode_fn(msg, buffer PROTO_ENCODE_DEBUG_INIT(&shared_buf));
-#ifdef ESPHOME_DEBUG_API
-  assert(end == shared_buf.data() + shared_buf.size());
-#else
-  (void) end;
-#endif
   return this->send_buffer(ProtoWriteBuffer{&shared_buf}, message_type);
 }
 // encode_to_buffer is defined inline in api_connection.h (ESPHOME_ALWAYS_INLINE)

esphome/components/api/api_connection.h

@@ -345,7 +345,11 @@ class APIConnection final : public APIServerConnectionBase {
   /// Returns false as soon as the TCP buffer is full. Marked nodiscard so we
   /// have no silent failures: every caller must handle (or log) a refusal.
   template<typename T> [[nodiscard]] bool send_message(const T &msg) {
-    return this->send_message_(T::calc_size_msg(&msg), T::MESSAGE_TYPE, &T::encode_msg, &msg);
+    if constexpr (T::ESTIMATED_SIZE == 0) {
+      return this->send_message_(0, T::MESSAGE_TYPE, &encode_msg_noop, &msg);
+    } else {
+      return this->send_message_(msg.calculate_size(), T::MESSAGE_TYPE, &proto_encode_msg<T>, &msg);
+    }
   }
 
   /// Clear the shared write buffer and reserve space for the first message.
@@ -401,6 +405,16 @@ class APIConnection final : public APIServerConnectionBase {
   void process_state_subscriptions_();
 #endif
 
+  // Size thunk — converts void* back to concrete type for direct calculate_size() call
+  template<typename T> static uint32_t calc_size(const void *msg) {
+    return static_cast<const T *>(msg)->calculate_size();
+  }
+
+  // Shared no-op encode thunk for empty messages (ESTIMATED_SIZE == 0)
+  static uint8_t *encode_msg_noop(const void *, ProtoWriteBuffer &buf PROTO_ENCODE_DEBUG_PARAM) {
+    return buf.get_pos();
+  }
+
   // Non-template buffer management for send_message
   bool send_message_(uint32_t payload_size, uint16_t message_type, MessageEncodeFn encode_fn, const void *msg);
 
@@ -419,7 +433,11 @@ class APIConnection final : public APIServerConnectionBase {
   // Hot paths (state/info) go through fill_and_encode_entity_state/info instead.
   // batch_message_type_ is already set by dispatch_message_ before reaching here.
   template<typename T> static uint16_t encode_message_to_buffer(T &msg, APIConnection *conn, uint32_t remaining_size) {
-    return encode_to_buffer_slow(T::calc_size_msg(&msg), &T::encode_msg, &msg, conn, remaining_size);
+    if constexpr (T::ESTIMATED_SIZE == 0) {
+      return encode_to_buffer_slow(0, &encode_msg_noop, &msg, conn, remaining_size);
+    } else {
+      return encode_to_buffer_slow(msg.calculate_size(), &proto_encode_msg<T>, &msg, conn, remaining_size);
+    }
   }
 
   // Non-template core — fills state fields and encodes
@@ -431,7 +449,7 @@ class APIConnection final : public APIServerConnectionBase {
   template<typename T>
   static uint16_t fill_and_encode_entity_state(EntityBase *entity, T &msg, APIConnection *conn,
                                                uint32_t remaining_size) {
-    return fill_and_encode_entity_state(entity, msg, &T::calc_size_msg, &T::encode_msg, conn, remaining_size);
+    return fill_and_encode_entity_state(entity, msg, &calc_size<T>, &proto_encode_msg<T>, conn, remaining_size);
   }
 
   // Non-template core — fills info fields, allocates buffers, and encodes
@@ -443,7 +461,7 @@ class APIConnection final : public APIServerConnectionBase {
   template<typename T>
   static uint16_t fill_and_encode_entity_info(EntityBase *entity, T &msg, APIConnection *conn,
                                               uint32_t remaining_size) {
-    return fill_and_encode_entity_info(entity, msg, &T::calc_size_msg, &T::encode_msg, conn, remaining_size);
+    return fill_and_encode_entity_info(entity, msg, &calc_size<T>, &proto_encode_msg<T>, conn, remaining_size);
   }
 
   // Non-template core — fills device_class, then delegates to fill_and_encode_entity_info
@@ -457,8 +475,8 @@ class APIConnection final : public APIServerConnectionBase {
   static uint16_t fill_and_encode_entity_info_with_device_class(EntityBase *entity, T &msg,
                                                                 StringRef &device_class_field, APIConnection *conn,
                                                                 uint32_t remaining_size) {
-    return fill_and_encode_entity_info_with_device_class(entity, msg, device_class_field, &T::calc_size_msg,
+    return fill_and_encode_entity_info_with_device_class(entity, msg, device_class_field, &calc_size<T>,
-                                                         &T::encode_msg, conn, remaining_size);
+                                                         &proto_encode_msg<T>, conn, remaining_size);
   }
 
 #ifdef USE_VOICE_ASSISTANT

esphome/components/api/api_connection_buffer.h

@@ -46,13 +46,7 @@ inline uint16_t ESPHOME_ALWAYS_INLINE APIConnection::encode_to_buffer(uint32_t c
     return 0;
   }
   ProtoWriteBuffer buffer{&shared_buf, shared_buf.size() - calculated_size};
-  uint8_t *end = encode_fn(msg, buffer PROTO_ENCODE_DEBUG_INIT(&shared_buf));
+  encode_fn(msg, buffer PROTO_ENCODE_DEBUG_INIT(&shared_buf));
-#ifdef ESPHOME_DEBUG_API
-  // A body that writes fewer bytes than calculate_size() promised would ship stale buffer bytes
-  assert(end == shared_buf.data() + shared_buf.size());
-#else
-  (void) end;
-#endif
 
   return total_calculated_size;
 }

esphome/components/api/api_server.cpp

@@ -433,9 +433,8 @@ void APIServer::send_homeassistant_action(const HomeassistantActionRequest &call
     // Home Assistant subscribes to actions shortly *after* authenticating, so actions
     // fired right at connection time (on_client_connected, on_time_sync, ...) can
     // arrive before the subscription and are lost - warn instead of failing silently.
-    ESP_LOGW(TAG, "Home Assistant %s '%.*s' dropped; %s",
+    ESP_LOGW(TAG, "Home Assistant %s '%s' dropped; %s",
-             call.is_event ? LOG_STR_LITERAL("event") : LOG_STR_LITERAL("action"),
+             call.is_event ? LOG_STR_LITERAL("event") : LOG_STR_LITERAL("action"), call.service.c_str(),
-             static_cast<int>(call.service.size()), call.service.empty() ? "" : call.service.c_str(),
              this->is_connected() ? LOG_STR_LITERAL("client has not subscribed to actions (yet)")
                                   : LOG_STR_LITERAL("no client connected"));
   }

esphome/components/api/proto.cpp

@@ -214,74 +214,73 @@ void ProtoDecodableMessage::decode(const uint8_t *buffer, size_t length) {
   const uint8_t *ptr = buffer;
   const uint8_t *end = buffer + length;
 
-  // Single-byte varints dominate, so that case advances the cursor inline.
-  auto read_varint = [&](proto_varint_value_t &value) ESPHOME_ALWAYS_INLINE {
-    if (ptr == end)
-      return false;
-    if (*ptr < 0x80) [[likely]] {
-      value = *ptr++;
-      return true;
-    }
-    auto res = ProtoVarInt::parse_non_empty(ptr, end - ptr);
-    if (!res.has_value())
-      return false;
-    value = res.value;
-    ptr += res.consumed;
-    return true;
-  };
-
   while (ptr < end) {
-    proto_varint_value_t tag_value;
+    // Parse field header - ptr < end guarantees len >= 1
-    if (!read_varint(tag_value)) {
+    auto res = ProtoVarInt::parse_non_empty(ptr, end - ptr);
+    if (!res.has_value()) {
       ESP_LOGV(TAG, "Invalid field start at offset %ld", (long) (ptr - buffer));
       return;
     }
 
-    uint32_t tag = static_cast<uint32_t>(tag_value);
+    uint32_t tag = static_cast<uint32_t>(res.value);
     uint32_t field_type = tag & WIRE_TYPE_MASK;
-    // Length-delimited fields move this past the length prefix
+    uint32_t field_id = tag >> 3;
-    const uint8_t *data = ptr;
+    ptr += res.consumed;
-    proto_varint_value_t scalar;
 
-    if (field_type == WIRE_TYPE_VARINT) [[likely]] {
+    switch (field_type) {
-      if (!read_varint(scalar)) {
+      case WIRE_TYPE_VARINT: {  // VarInt
-        ESP_LOGV(TAG, "Invalid VarInt at offset %ld", (long) (ptr - buffer));
+        res = ProtoVarInt::parse(ptr, end - ptr);
-        return;
+        if (!res.has_value()) {
-      }
+          ESP_LOGV(TAG, "Invalid VarInt at offset %ld", (long) (ptr - buffer));
-    } else {
-      switch (field_type) {
-        case WIRE_TYPE_LENGTH_DELIMITED: {
-          proto_varint_value_t length_value;
-          if (!read_varint(length_value)) {
-            ESP_LOGV(TAG, "Invalid Length Delimited at offset %ld", (long) (ptr - buffer));
-            return;
-          }
-          uint32_t field_length = static_cast<uint32_t>(length_value);
-          if (field_length > static_cast<size_t>(end - ptr)) {
-            ESP_LOGV(TAG, "Out-of-bounds Length Delimited at offset %ld", (long) (ptr - buffer));
-            return;
-          }
-          data = ptr;
-          scalar = field_length;
-          ptr += field_length;
-          break;
-        }
-        case WIRE_TYPE_FIXED32: {
-          if (end - ptr < 4) {
-            ESP_LOGV(TAG, "Out-of-bounds Fixed32-bit at offset %ld", (long) (ptr - buffer));
-            return;
-          }
-          // Byte loads instead of memcpy: ESP-IDF passes -fno-builtin-memcpy, which made this a call
-          scalar = encode_uint32(ptr[3], ptr[2], ptr[1], ptr[0]);
-          ptr += 4;
-          break;
-        }
-        default:
-          ESP_LOGV(TAG, "Invalid field type %" PRIu32 " at offset %ld", field_type, (long) (ptr - buffer));
           return;
+        }
+        if (!this->decode_varint(field_id, res.value)) {
+          ESP_LOGV(TAG, "Cannot decode VarInt field %" PRIu32 " with value %" PRIu64 "!", field_id,
+                   static_cast<uint64_t>(res.value));
+        }
+        ptr += res.consumed;
+        break;
       }
+      case WIRE_TYPE_LENGTH_DELIMITED: {  // Length-delimited
+        res = ProtoVarInt::parse(ptr, end - ptr);
+        if (!res.has_value()) {
+          ESP_LOGV(TAG, "Invalid Length Delimited at offset %ld", (long) (ptr - buffer));
+          return;
+        }
+        uint32_t field_length = static_cast<uint32_t>(res.value);
+        ptr += res.consumed;
+        if (field_length > static_cast<size_t>(end - ptr)) {
+          ESP_LOGV(TAG, "Out-of-bounds Length Delimited at offset %ld", (long) (ptr - buffer));
+          return;
+        }
+        if (!this->decode_length(field_id, ProtoLengthDelimited(ptr, field_length))) {
+          ESP_LOGV(TAG, "Cannot decode Length Delimited field %" PRIu32 "!", field_id);
+        }
+        ptr += field_length;
+        break;
+      }
+      case WIRE_TYPE_FIXED32: {  // 32-bit
+        if (end - ptr < 4) {
+          ESP_LOGV(TAG, "Out-of-bounds Fixed32-bit at offset %ld", (long) (ptr - buffer));
+          return;
+        }
+        uint32_t val;
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+        // Protobuf fixed32 is little-endian — direct load on LE platforms
+        memcpy(&val, ptr, 4);
+#else
+        val = encode_uint32(ptr[3], ptr[2], ptr[1], ptr[0]);
+#endif
+        if (!this->decode_32bit(field_id, Proto32Bit(val))) {
+          ESP_LOGV(TAG, "Cannot decode 32-bit field %" PRIu32 " with value %" PRIu32 "!", field_id, val);
+        }
+        ptr += 4;
+        break;
+      }
+      default:
+        ESP_LOGV(TAG, "Invalid field type %" PRIu32 " at offset %ld", field_type, (long) (ptr - buffer));
+        return;
     }
-    this->decode_field(tag, data, scalar);
   }
 }
 

esphome/components/api/proto.h

@@ -170,43 +170,40 @@ class ProtoVarInt {
 class ProtoMessage;
 class ProtoSize;
 
-/// Case label for decode_field(): the wire tag of a field, so a field that arrives with another wire
+class ProtoLengthDelimited {
-/// type matches no case.
-constexpr uint32_t proto_tag(uint32_t field_id, uint32_t wire_type) { return (field_id << 3) | wire_type; }
-
-/// One decoded field: the payload pointer and a scalar holding the varint or fixed32 value, or the
-/// length of a length-delimited field. The wire type in the tag says which applies; accessors do not check.
-class ProtoFieldValue {
  public:
-  ProtoFieldValue(const uint8_t *data, proto_varint_value_t scalar) : data_(data), scalar_(scalar) {}
+  explicit ProtoLengthDelimited(const uint8_t *value, size_t length) : value_(value), length_(length) {}
+  std::string as_string() const { return std::string(reinterpret_cast<const char *>(this->value_), this->length_); }
 
-  proto_varint_value_t as_varint() const { return this->scalar_; }
+  // Direct access to raw data without string allocation
-  // A bool is sent as 0 or 1, so the low word is enough and saves a second compare with 64 bit varints
+  const uint8_t *data() const { return this->value_; }
-  bool as_bool() const { return static_cast<uint32_t>(this->scalar_) != 0; }
+  size_t size() const { return this->length_; }
 
-  // Length-delimited accessors
+  /// Decode the length-delimited data into a message instance.
-  const uint8_t *data() const { return this->data_; }
-  size_t size() const { return static_cast<size_t>(this->scalar_); }
-  std::string as_string() const { return std::string(reinterpret_cast<const char *>(this->data_), this->size()); }
-  /// Decode the length-delimited payload into a message instance.
   /// Template preserves concrete type so decode() resolves statically.
-  template<typename T> void decode_to_message(T &msg) const { msg.decode(this->data_, this->size()); }
+  template<typename T> void decode_to_message(T &msg) const;
 
-  // Fixed32 accessors
+ protected:
-  uint32_t as_fixed32() const { return static_cast<uint32_t>(this->scalar_); }
+  const uint8_t *const value_;
-  int32_t as_sfixed32() const { return static_cast<int32_t>(this->as_fixed32()); }
+  const size_t length_;
+};
+
+class Proto32Bit {
+ public:
+  explicit Proto32Bit(uint32_t value) : value_(value) {}
+  uint32_t as_fixed32() const { return this->value_; }
+  int32_t as_sfixed32() const { return static_cast<int32_t>(this->value_); }
   float as_float() const {
     union {
       uint32_t raw;
       float value;
     } s{};
-    s.raw = this->as_fixed32();
+    s.raw = this->value_;
     return s.value;
   }
 
- private:
+ protected:
-  const uint8_t *data_;
+  const uint32_t value_;
-  proto_varint_value_t scalar_;
 };
 
 // NOTE: Proto64Bit class removed - wire type 1 (64-bit fixed) not supported
@@ -255,7 +252,7 @@ class ProtoWriteBuffer {
    *
    * Following https://protobuf.dev/programming-guides/encoding/#structure
    */
-  void encode_field_raw(uint32_t field_id, uint32_t type) { this->encode_varint_raw(proto_tag(field_id, type)); }
+  void encode_field_raw(uint32_t field_id, uint32_t type) { this->encode_varint_raw((field_id << 3) | type); }
   /// Single-pass encode for repeated submessage elements.
   /// Thin template wrapper; all buffer work is in the non-template core.
   template<typename T> void encode_sub_message(uint32_t field_id, const T &value);
@@ -290,31 +287,19 @@ class ProtoWriteBuffer {
   uint8_t *pos_;
 };
 
-// A four byte unaligned store is a memcpy call on ESP-IDF (-fno-builtin-memcpy) and on ARM cores without
-// unaligned access (Cortex-M0+, ARM9), so those targets share one outlined byte store helper per fixed32
-// field. Elsewhere the write inlines to a single store, or on ESP8266 to a few stores that measured
-// faster than a call, so it stays inline.
-#if defined(USE_ESP32) || (defined(__arm__) && !defined(__ARM_FEATURE_UNALIGNED))
-#define PROTO_OUTLINE_FOR_SIZE __attribute__((noinline))
-#define PROTO_FIXED32_BYTE_STORES true
-#else
-#define PROTO_OUTLINE_FOR_SIZE inline
-#define PROTO_FIXED32_BYTE_STORES false
-#endif
-
 // Varint encoding thresholds — used by both proto_encode_* free functions and ProtoSize.
 constexpr uint32_t VARINT_MAX_1_BYTE = 1 << 7;   // 128
 constexpr uint32_t VARINT_MAX_2_BYTE = 1 << 14;  // 16384
 
-/// Static encode helpers for the generated encode bodies. Each takes the write cursor by value and
+/// Static encode helpers for generated encode() functions.
-/// returns it advanced, so outlined calls at -Os chain through the return register instead of a
+/// Generated code hoists buffer.pos_ into a local uint8_t *__restrict__ pos,
-/// stack slot. Helpers without a _force suffix skip fields holding the proto3 default.
+/// then calls these methods which take pos by reference. No struct, no overhead.
+/// For sub-messages, pos is synced back to buffer before the call and reloaded after.
 class ProtoEncode {
  public:
   /// Write a multi-byte varint directly through a pos pointer.
   template<typename T>
-  [[nodiscard]] static inline uint8_t *encode_varint_raw_loop(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_varint_raw_loop(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, T value) {
-                                                              T value) {
     do {
       PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
       *pos++ = static_cast<uint8_t>(value | 0x80);
@@ -322,49 +307,48 @@ class ProtoEncode {
     } while (value > 0x7F);
     PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
     *pos++ = static_cast<uint8_t>(value);
-    return pos;
   }
-  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  static inline void ESPHOME_ALWAYS_INLINE encode_varint_raw(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-  encode_varint_raw(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint32_t value) {
+                                                             uint32_t value) {
     if (value < VARINT_MAX_1_BYTE) [[likely]] {
       PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
       *pos++ = static_cast<uint8_t>(value);
-      return pos;
+      return;
     }
-    return encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, value);
+    encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, value);
   }
   /// Encode a varint that is expected to be 1-2 bytes (e.g. zigzag RSSI, small lengths).
-  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  static inline void ESPHOME_ALWAYS_INLINE encode_varint_raw_short(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-  encode_varint_raw_short(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint32_t value) {
+                                                                   uint32_t value) {
     if (value < VARINT_MAX_1_BYTE) [[likely]] {
       PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
       *pos++ = static_cast<uint8_t>(value);
-      return pos;
+      return;
     }
     if (value < VARINT_MAX_2_BYTE) [[likely]] {
       PROTO_ENCODE_CHECK_BOUNDS(pos, 2);
       *pos++ = static_cast<uint8_t>(value | 0x80);
       *pos++ = static_cast<uint8_t>(value >> 7);
-      return pos;
+      return;
     }
-    return encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, value);
+    encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, value);
   }
-  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  static inline void ESPHOME_ALWAYS_INLINE encode_varint_raw_64(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-  encode_varint_raw_64(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint64_t value) {
+                                                                uint64_t value) {
     if (value < VARINT_MAX_1_BYTE) [[likely]] {
       PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
       *pos++ = static_cast<uint8_t>(value);
-      return pos;
+      return;
     }
-    return encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, value);
+    encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, value);
   }
   /// Encode a 48-bit MAC address (stored in a uint64) as varint.
   /// Real MAC addresses occupy the full 48 bits (OUI in upper 24), so the
   /// fast path -- any non-zero bit in the top 6 of 48 -- emits exactly 7 bytes
   /// with no per-byte branch. Falls back to the general loop otherwise.
   /// Caller must guarantee value fits in 48 bits (checked in debug builds).
-  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  static inline void ESPHOME_ALWAYS_INLINE encode_varint_raw_48bit(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-  encode_varint_raw_48bit(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint64_t value) {
+                                                                   uint64_t value) {
 #ifdef ESPHOME_DEBUG_API
     assert(value < (1ULL << (MAC_ADDRESS_SIZE * 8)) && "encode_varint_raw_48bit: value exceeds 48 bits");
 #endif
@@ -379,39 +363,38 @@ class ProtoEncode {
       pos[4] = static_cast<uint8_t>((value >> 28) | 0x80);
       pos[5] = static_cast<uint8_t>((value >> 35) | 0x80);
       pos[6] = static_cast<uint8_t>(value >> 42);
-      return pos + 7;
+      pos += 7;
+      return;
     }
-    return encode_varint_raw_64(pos PROTO_ENCODE_DEBUG_ARG, value);
+    encode_varint_raw_64(pos PROTO_ENCODE_DEBUG_ARG, value);
   }
-  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  static inline void ESPHOME_ALWAYS_INLINE encode_field_raw(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-  encode_field_raw(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id, uint32_t type) {
+                                                            uint32_t field_id, uint32_t type) {
-    return encode_varint_raw(pos PROTO_ENCODE_DEBUG_ARG, proto_tag(field_id, type));
+    encode_varint_raw(pos PROTO_ENCODE_DEBUG_ARG, (field_id << 3) | type);
   }
   /// Write a single precomputed tag byte. Tag must be < 128.
-  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  static inline void ESPHOME_ALWAYS_INLINE write_raw_byte(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-  write_raw_byte(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint8_t b) {
+                                                          uint8_t b) {
     PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
     *pos++ = b;
-    return pos;
   }
   /// Reserve one byte for later backpatch (e.g., sub-message length).
   /// Advances pos past the reserved byte without writing a value.
-  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  static inline void ESPHOME_ALWAYS_INLINE reserve_byte(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM) {
-  reserve_byte(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM) {
     PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
-    return pos + 1;
+    pos++;
   }
   /// Write raw bytes to the buffer (no tag, no length prefix).
-  [[nodiscard]] static inline uint8_t *ESPHOME_ALWAYS_INLINE
+  static inline void ESPHOME_ALWAYS_INLINE encode_raw(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-  encode_raw(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, const void *data, size_t len) {
+                                                      const void *data, size_t len) {
     PROTO_ENCODE_CHECK_BOUNDS(pos, len);
     std::memcpy(pos, data, len);
-    return pos + len;
+    pos += len;
   }
   /// Encode tag + 1-byte length + raw string data. For strings with max_data_length < 128.
   /// Tag must be a single-byte varint (< 128). Always encodes (no zero check).
-  [[nodiscard]] static inline uint8_t *encode_short_string_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_short_string_force(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint8_t tag,
-                                                                 uint8_t tag, const StringRef &ref) {
+                                               const StringRef &ref) {
 #ifdef ESPHOME_DEBUG_API
     assert(ref.size() < 128 && "encode_short_string_force: string exceeds max_data_length < 128");
 #endif
@@ -419,191 +402,137 @@ class ProtoEncode {
     pos[0] = tag;
     pos[1] = static_cast<uint8_t>(ref.size());
     std::memcpy(pos + 2, ref.c_str(), ref.size());
-    return pos + 2 + ref.size();
+    pos += 2 + ref.size();
   }
-  /// Write a precomputed tag byte + 32-bit value. Outlined on embedded: one copy beats inline stores per field.
+  /// Write a precomputed tag byte + 32-bit value in one operation.
-  [[nodiscard]] static PROTO_OUTLINE_FOR_SIZE uint8_t *write_tag_and_fixed32(
+  static inline void ESPHOME_ALWAYS_INLINE write_tag_and_fixed32(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-      uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint8_t tag, uint32_t value) {
+                                                                 uint8_t tag, uint32_t value) {
     PROTO_ENCODE_CHECK_BOUNDS(pos, 5);
     pos[0] = tag;
-    write_fixed32_le(pos + 1, value);
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
-    return pos + 5;
+    std::memcpy(pos + 1, &value, 4);
+#else
+    pos[1] = static_cast<uint8_t>(value & 0xFF);
+    pos[2] = static_cast<uint8_t>((value >> 8) & 0xFF);
+    pos[3] = static_cast<uint8_t>((value >> 16) & 0xFF);
+    pos[4] = static_cast<uint8_t>((value >> 24) & 0xFF);
+#endif
+    pos += 5;
   }
-  [[nodiscard]] static inline uint8_t *encode_string_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_string(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                                           uint32_t field_id, const char *string, size_t len) {
+                                   const char *string, size_t len, bool force = false) {
-    pos = encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 2);  // type 2: Length-delimited string
+    if (len == 0 && !force)
+      return;
+    encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 2);  // type 2: Length-delimited string
     // NOLINTNEXTLINE(readability-inconsistent-ifelse-braces) -- false positive on [[likely]] attribute
     if (len < VARINT_MAX_1_BYTE) [[likely]] {
       PROTO_ENCODE_CHECK_BOUNDS(pos, 1 + len);
       *pos++ = static_cast<uint8_t>(len);
     } else {
-      pos = encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, len);
+      encode_varint_raw_loop(pos PROTO_ENCODE_DEBUG_ARG, len);
       PROTO_ENCODE_CHECK_BOUNDS(pos, len);
     }
     std::memcpy(pos, string, len);
-    return pos + len;
+    pos += len;
   }
-  [[nodiscard]] static inline uint8_t *encode_string(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_string(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                                     uint32_t field_id, const char *string, size_t len) {
+                                   const std::string &value, bool force = false) {
-    if (len == 0)
+    encode_string(pos PROTO_ENCODE_DEBUG_ARG, field_id, value.data(), value.size(), force);
-      return pos;
-    return encode_string_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, string, len);
   }
-  [[nodiscard]] static inline uint8_t *encode_string_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_string(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                                           uint32_t field_id, const std::string &value) {
+                                   const StringRef &ref, bool force = false) {
-    return encode_string_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, value.data(), value.size());
+    encode_string(pos PROTO_ENCODE_DEBUG_ARG, field_id, ref.c_str(), ref.size(), force);
   }
-  [[nodiscard]] static inline uint8_t *encode_string(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_bytes(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                                     uint32_t field_id, const StringRef &ref) {
+                                  const uint8_t *data, size_t len, bool force = false) {
-    return encode_string(pos PROTO_ENCODE_DEBUG_ARG, field_id, ref.c_str(), ref.size());
+    encode_string(pos PROTO_ENCODE_DEBUG_ARG, field_id, reinterpret_cast<const char *>(data), len, force);
   }
-  [[nodiscard]] static inline uint8_t *encode_string_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_uint32(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                                           uint32_t field_id, const StringRef &ref) {
+                                   uint32_t value, bool force = false) {
-    return encode_string_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, ref.c_str(), ref.size());
+    if (value == 0 && !force)
+      return;
+    encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 0);
+    encode_varint_raw(pos PROTO_ENCODE_DEBUG_ARG, value);
   }
-  [[nodiscard]] static inline uint8_t *encode_bytes(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_uint64(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                                    uint32_t field_id, const uint8_t *data, size_t len) {
+                                   uint64_t value, bool force = false) {
-    return encode_string(pos PROTO_ENCODE_DEBUG_ARG, field_id, reinterpret_cast<const char *>(data), len);
+    if (value == 0 && !force)
+      return;
+    encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 0);
+    encode_varint_raw_64(pos PROTO_ENCODE_DEBUG_ARG, value);
   }
-  [[nodiscard]] static inline uint8_t *encode_bytes_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_bool(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id, bool value,
-                                                          uint32_t field_id, const uint8_t *data, size_t len) {
+                                 bool force = false) {
-    return encode_string_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, reinterpret_cast<const char *>(data), len);
+    if (!value && !force)
-  }
+      return;
-  [[nodiscard]] static inline uint8_t *encode_uint32_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+    encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 0);
-                                                           uint32_t field_id, uint32_t value) {
-    pos = encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 0);
-    return encode_varint_raw(pos PROTO_ENCODE_DEBUG_ARG, value);
-  }
-  [[nodiscard]] static inline uint8_t *encode_uint32(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
-                                                     uint32_t field_id, uint32_t value) {
-    if (value == 0)
-      return pos;
-    return encode_uint32_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, value);
-  }
-  [[nodiscard]] static inline uint8_t *encode_uint64_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
-                                                           uint32_t field_id, uint64_t value) {
-    pos = encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 0);
-    return encode_varint_raw_64(pos PROTO_ENCODE_DEBUG_ARG, value);
-  }
-  [[nodiscard]] static inline uint8_t *encode_uint64(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
-                                                     uint32_t field_id, uint64_t value) {
-    if (value == 0)
-      return pos;
-    return encode_uint64_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, value);
-  }
-  [[nodiscard]] static inline uint8_t *encode_bool_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
-                                                         uint32_t field_id, bool value) {
-    pos = encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 0);
     PROTO_ENCODE_CHECK_BOUNDS(pos, 1);
     *pos++ = value ? 0x01 : 0x00;
-    return pos;
   }
-  [[nodiscard]] static inline uint8_t *encode_bool(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_fixed32(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                                   uint32_t field_id, bool value) {
+                                    uint32_t value, bool force = false) {
-    if (!value)
+    if (value == 0 && !force)
-      return pos;
+      return;
-    return encode_bool_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, value);
+    encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 5);
-  }
-  /// Tag + fixed32 for multi-byte tags; single-byte tags use write_tag_and_fixed32.
-  [[nodiscard]] static PROTO_OUTLINE_FOR_SIZE uint8_t *encode_fixed32_force(
-      uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id, uint32_t value) {
-    pos = encode_field_raw(pos PROTO_ENCODE_DEBUG_ARG, field_id, 5);
     PROTO_ENCODE_CHECK_BOUNDS(pos, 4);
-    write_fixed32_le(pos, value);
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
-    return pos + 4;
+    std::memcpy(pos, &value, 4);
-  }
+    pos += 4;
-  [[nodiscard]] static inline uint8_t *encode_fixed32(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+#else
-                                                      uint32_t field_id, uint32_t value) {
+    *pos++ = (value >> 0) & 0xFF;
-    if (value == 0)
+    *pos++ = (value >> 8) & 0xFF;
-      return pos;
+    *pos++ = (value >> 16) & 0xFF;
-    return encode_fixed32_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, value);
+    *pos++ = (value >> 24) & 0xFF;
+#endif
   }
   // NOTE: Wire type 1 (64-bit fixed: double, fixed64, sfixed64) is intentionally
   // not supported to reduce overhead on embedded systems. All ESPHome devices are
   // 32-bit microcontrollers where 64-bit operations are expensive. If 64-bit support
   // is needed in the future, the necessary encoding/decoding functions must be added.
-  [[nodiscard]] static inline uint8_t *encode_float(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_float(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id, float value,
-                                                    uint32_t field_id, float value) {
+                                  bool force = false) {
-    return encode_fixed32(pos PROTO_ENCODE_DEBUG_ARG, field_id, float_to_raw(value));
+    uint32_t raw = float_to_raw(value);
+    if (raw == 0 && !force)
+      return;
+    encode_fixed32(pos PROTO_ENCODE_DEBUG_ARG, field_id, raw);
   }
-  [[nodiscard]] static inline uint8_t *encode_float_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_int32(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id, int32_t value,
-                                                          uint32_t field_id, float value) {
+                                  bool force = false) {
-    return encode_fixed32_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, float_to_raw(value));
-  }
-  [[nodiscard]] static inline uint8_t *encode_int32_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
-                                                          uint32_t field_id, int32_t value) {
     if (value < 0) {
       // negative int32 is always 10 byte long
-      return encode_uint64_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, static_cast<uint64_t>(value));
+      encode_uint64(pos PROTO_ENCODE_DEBUG_ARG, field_id, static_cast<uint64_t>(value), force);
+      return;
     }
-    return encode_uint32_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, static_cast<uint32_t>(value));
+    encode_uint32(pos PROTO_ENCODE_DEBUG_ARG, field_id, static_cast<uint32_t>(value), force);
   }
-  [[nodiscard]] static inline uint8_t *encode_int32(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_int64(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id, int64_t value,
-                                                    uint32_t field_id, int32_t value) {
+                                  bool force = false) {
-    if (value == 0)
+    encode_uint64(pos PROTO_ENCODE_DEBUG_ARG, field_id, static_cast<uint64_t>(value), force);
-      return pos;
-    return encode_int32_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, value);
   }
-  [[nodiscard]] static inline uint8_t *encode_int64(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_sint32(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                                    uint32_t field_id, int64_t value) {
+                                   int32_t value, bool force = false) {
-    return encode_uint64(pos PROTO_ENCODE_DEBUG_ARG, field_id, static_cast<uint64_t>(value));
+    encode_uint32(pos PROTO_ENCODE_DEBUG_ARG, field_id, encode_zigzag32(value), force);
   }
-  [[nodiscard]] static inline uint8_t *encode_int64_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_sint64(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, uint32_t field_id,
-                                                          uint32_t field_id, int64_t value) {
+                                   int64_t value, bool force = false) {
-    return encode_uint64_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, static_cast<uint64_t>(value));
+    encode_uint64(pos PROTO_ENCODE_DEBUG_ARG, field_id, encode_zigzag64(value), force);
   }
-  [[nodiscard]] static inline uint8_t *encode_sint32(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  /// Sub-message encoding: sync pos to buffer, delegate, get pos from return value.
-                                                     uint32_t field_id, int32_t value) {
-    return encode_uint32(pos PROTO_ENCODE_DEBUG_ARG, field_id, encode_zigzag32(value));
-  }
-  [[nodiscard]] static inline uint8_t *encode_sint32_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
-                                                           uint32_t field_id, int32_t value) {
-    return encode_uint32_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, encode_zigzag32(value));
-  }
-  [[nodiscard]] static inline uint8_t *encode_sint64(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
-                                                     uint32_t field_id, int64_t value) {
-    return encode_uint64(pos PROTO_ENCODE_DEBUG_ARG, field_id, encode_zigzag64(value));
-  }
-  [[nodiscard]] static inline uint8_t *encode_sint64_force(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
-                                                           uint32_t field_id, int64_t value) {
-    return encode_uint64_force(pos PROTO_ENCODE_DEBUG_ARG, field_id, encode_zigzag64(value));
-  }
-  /// Sub-message encoding: sync pos to buffer, delegate, read the cursor back.
   template<typename T>
-  [[nodiscard]] static inline uint8_t *encode_sub_message(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_sub_message(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM, ProtoWriteBuffer &buffer,
-                                                          ProtoWriteBuffer &buffer, uint32_t field_id, const T &value) {
+                                        uint32_t field_id, const T &value) {
     buffer.set_pos(pos);
     buffer.encode_sub_message(field_id, value);
-    return buffer.get_pos();
+    pos = buffer.get_pos();
   }
   template<typename T>
-  [[nodiscard]] static inline uint8_t *encode_optional_sub_message(uint8_t *__restrict__ pos PROTO_ENCODE_DEBUG_PARAM,
+  static inline void encode_optional_sub_message(uint8_t *__restrict__ &pos PROTO_ENCODE_DEBUG_PARAM,
-                                                                   ProtoWriteBuffer &buffer, uint32_t field_id,
+                                                 ProtoWriteBuffer &buffer, uint32_t field_id, const T &value) {
-                                                                   const T &value) {
     buffer.set_pos(pos);
     buffer.encode_optional_sub_message(field_id, value);
-    return buffer.get_pos();
+    pos = buffer.get_pos();
-  }
-
- private:
-  /// Unaligned little endian store of four bytes: byte stores where the outlined helper lives (ESP-IDF, ARM
-  /// without unaligned access), otherwise a memcpy the compiler folds into one store. Callers bounds check
-  /// and advance the cursor themselves.
-  static inline void ESPHOME_ALWAYS_INLINE write_fixed32_le(uint8_t *__restrict__ pos, uint32_t value) {
-    if constexpr (PROTO_FIXED32_BYTE_STORES) {
-      // Spelled out so the outlined helper does not itself become a memcpy call
-      pos[0] = static_cast<uint8_t>(value);
-      pos[1] = static_cast<uint8_t>(value >> 8);
-      pos[2] = static_cast<uint8_t>(value >> 16);
-      pos[3] = static_cast<uint8_t>(value >> 24);
-    } else {
-      const uint32_t le = convert_little_endian(value);
-      __builtin_memcpy(pos, &le, 4);
-    }
   }
 };
-#undef PROTO_OUTLINE_FOR_SIZE
-#undef PROTO_FIXED32_BYTE_STORES
 
 #ifdef HAS_PROTO_MESSAGE_DUMP
 /**
@@ -695,12 +624,11 @@ class DumpBuffer {
 
 class ProtoMessage {
  public:
-  // Non-virtual defaults for messages with no fields; generated classes hide all four. The
+  // Non-virtual defaults for messages with no fields.
-  // static encode_msg/calc_size_msg take const void * so &T::encode_msg needs no thunk.
+  // Concrete message classes hide these with their own implementations.
-  static uint8_t *encode_msg(const void *self, ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) {
+  // All call sites use templates to preserve the concrete type, so virtual
-    return buffer.get_pos();
+  // dispatch is not needed. This eliminates per-message vtable entries for
-  }
+  // encode/calculate_size, saving ~1.3 KB of flash across all message types.
-  static uint32_t calc_size_msg(const void *self) { return 0; }
   uint8_t *encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) const { return buffer.get_pos(); }
   uint32_t calculate_size() const { return 0; }
 #ifdef HAS_PROTO_MESSAGE_DUMP
@@ -735,10 +663,10 @@ class ProtoDecodableMessage : public ProtoMessage {
 
  protected:
   ~ProtoDecodableMessage() = default;
-  /// Store one decoded field; \p scalar is the varint or fixed32 value, or the length of the
+  virtual bool decode_varint(uint32_t field_id, proto_varint_value_t value) { return false; }
-  /// length-delimited payload at \p data. An unknown field or wrong wire type matches no case and is skipped.
+  virtual bool decode_length(uint32_t field_id, ProtoLengthDelimited value) { return false; }
-  /// Three register arguments keep the decode loop free of spills.
+  virtual bool decode_32bit(uint32_t field_id, Proto32Bit value) { return false; }
-  virtual void decode_field(uint32_t tag, const uint8_t *data, proto_varint_value_t scalar) {}
+  // NOTE: decode_64bit removed - wire type 1 not supported
 };
 
 class ProtoSize {
@@ -864,7 +792,7 @@ class ProtoSize {
    * @return The number of bytes needed to encode the field ID and wire type
    */
   static constexpr uint32_t field(uint32_t field_id, uint32_t type) {
-    uint32_t tag = proto_tag(field_id, type & WIRE_TYPE_MASK);
+    uint32_t tag = (field_id << 3) | (type & WIRE_TYPE_MASK);
     return varint(tag);
   }
 
@@ -948,14 +876,24 @@ class ProtoSize {
 
 // Implementation of methods that depend on ProtoSize being fully defined
 
+// Encode thunk — converts void* back to concrete type for direct encode() call
+template<typename T> uint8_t *proto_encode_msg(const void *msg, ProtoWriteBuffer &buf PROTO_ENCODE_DEBUG_PARAM) {
+  return static_cast<const T *>(msg)->encode(buf PROTO_ENCODE_DEBUG_ARG);
+}
+
 // Thin template wrapper; delegates to non-template core in proto.cpp.
 template<typename T> inline void ProtoWriteBuffer::encode_sub_message(uint32_t field_id, const T &value) {
-  this->encode_sub_message(field_id, &value, &T::encode_msg);
+  this->encode_sub_message(field_id, &value, &proto_encode_msg<T>);
 }
 
 // Thin template wrapper; delegates to non-template core.
 template<typename T> inline void ProtoWriteBuffer::encode_optional_sub_message(uint32_t field_id, const T &value) {
-  this->encode_optional_sub_message(field_id, T::calc_size_msg(&value), &value, &T::encode_msg);
+  this->encode_optional_sub_message(field_id, value.calculate_size(), &value, &proto_encode_msg<T>);
+}
+
+// Template decode_to_message - preserves concrete type so decode() resolves statically
+template<typename T> void ProtoLengthDelimited::decode_to_message(T &msg) const {
+  msg.decode(this->value_, this->length_);
 }
 
 template<typename T> const char *proto_enum_to_string(T value);

esphome/components/atm90e32/atm90e32.cpp

@@ -9,6 +9,10 @@ namespace esphome::atm90e32 {
 
 static const char *const TAG = "atm90e32";
 
+static const LogString *offset_calibration_name(bool power_offsets) {
+  return power_offsets ? LOG_STR("Power offset") : LOG_STR("Offset");
+}
+
 static uint32_t pref_hash(const char *prefix, const char *name_space) {
   auto hash = fnv1_hash(prefix);
   return fnv1_hash_extend(hash, name_space);
@@ -203,13 +207,12 @@ void ATM90E32Component::setup() {
 
     // Initialize flash storage for power offset calibrations
     uint32_t po_hash = pref_hash("_power_offset_calibration_", cs);
-    this->power_offset_pref_ = global_preferences->make_preference<PowerOffsetCalibration[3]>(po_hash, true);
+    this->power_offset_pref_ = global_preferences->make_preference<OffsetCalibration[3]>(po_hash, true);
     bool migrated_power_offset = false;
     if (has_distinct_legacy_namespace) {
       uint32_t legacy_po_hash = pref_hash("_power_offset_calibration_", legacy_cs);
-      auto legacy_power_offset_pref =
+      auto legacy_power_offset_pref = global_preferences->make_preference<OffsetCalibration[3]>(legacy_po_hash, true);
-          global_preferences->make_preference<PowerOffsetCalibration[3]>(legacy_po_hash, true);
+      OffsetCalibration power_offset_data[3]{};
-      PowerOffsetCalibration power_offset_data[3]{};
       int migration_status =
           migrate_legacy_pref_if_needed(this->power_offset_pref_, legacy_power_offset_pref, &power_offset_data);
       migrated_power_offset = migration_status > 0;
@@ -224,20 +227,20 @@ void ATM90E32Component::setup() {
       global_preferences->sync();
     }
 
-    this->restore_offset_calibrations_();
+    this->restore_offset_calibrations_(OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_VOLTAGE_CURRENT);
-    this->restore_power_offset_calibrations_();
+    this->restore_offset_calibrations_(OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER);
   } else {
     ESP_LOGI(TAG, "[CALIBRATION][%s] Power & Voltage/Current offset calibration is disabled. Using config file values.",
              cs);
     for (uint8_t phase = 0; phase < 3; ++phase) {
       this->write16_(this->voltage_offset_registers[phase],
-                     static_cast<uint16_t>(this->offset_phase_[phase].voltage_offset_));
+                     static_cast<uint16_t>(this->offset_phase_[phase].first_offset));
       this->write16_(this->current_offset_registers[phase],
-                     static_cast<uint16_t>(this->offset_phase_[phase].current_offset_));
+                     static_cast<uint16_t>(this->offset_phase_[phase].second_offset));
       this->write16_(this->power_offset_registers[phase],
-                     static_cast<uint16_t>(this->power_offset_phase_[phase].active_power_offset));
+                     static_cast<uint16_t>(this->power_offset_phase_[phase].first_offset));
       this->write16_(this->reactive_power_offset_registers[phase],
-                     static_cast<uint16_t>(this->power_offset_phase_[phase].reactive_power_offset));
+                     static_cast<uint16_t>(this->power_offset_phase_[phase].second_offset));
     }
   }
 
@@ -317,8 +320,8 @@ void ATM90E32Component::log_calibration_status_() {
              cs);
     for (uint8_t phase = 0; phase < 3; ++phase) {
       ESP_LOGW(TAG, "[CALIBRATION][%s] |   %c   |  %6d  | %6d  |  %6d  | %6d  |", cs, 'A' + phase,
-               this->config_offset_phase_[phase].voltage_offset_, this->offset_phase_[phase].voltage_offset_,
+               this->config_offset_phase_[phase].first_offset, this->offset_phase_[phase].first_offset,
-               this->config_offset_phase_[phase].current_offset_, this->offset_phase_[phase].current_offset_);
+               this->config_offset_phase_[phase].second_offset, this->offset_phase_[phase].second_offset);
     }
     ESP_LOGW(TAG,
              "[CALIBRATION][%s] ===============================================================================", cs);
@@ -335,10 +338,8 @@ void ATM90E32Component::log_calibration_status_() {
              cs);
     for (uint8_t phase = 0; phase < 3; ++phase) {
       ESP_LOGW(TAG, "[CALIBRATION][%s] |   %c   |  %6d  | %6d  |  %6d  | %6d  |", cs, 'A' + phase,
-               this->config_power_offset_phase_[phase].active_power_offset,
+               this->config_power_offset_phase_[phase].first_offset, this->power_offset_phase_[phase].first_offset,
-               this->power_offset_phase_[phase].active_power_offset,
+               this->config_power_offset_phase_[phase].second_offset, this->power_offset_phase_[phase].second_offset);
-               this->config_power_offset_phase_[phase].reactive_power_offset,
-               this->power_offset_phase_[phase].reactive_power_offset);
     }
     ESP_LOGW(TAG,
              "[CALIBRATION][%s] ===============================================================================", cs);
@@ -372,7 +373,7 @@ void ATM90E32Component::log_calibration_status_() {
     ESP_LOGI(TAG, "[CALIBRATION][%s] --------------------------------------------------------------", cs);
     for (uint8_t phase = 0; phase < 3; phase++) {
       ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |     %6d      |     %6d      |", cs, 'A' + phase,
-               this->offset_phase_[phase].voltage_offset_, this->offset_phase_[phase].current_offset_);
+               this->offset_phase_[phase].first_offset, this->offset_phase_[phase].second_offset);
     }
     ESP_LOGI(TAG, "[CALIBRATION][%s] ==============================================================\\n", cs);
   }
@@ -385,8 +386,7 @@ void ATM90E32Component::log_calibration_status_() {
     ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
     for (uint8_t phase = 0; phase < 3; phase++) {
       ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |       %6d        |        %6d        |", cs, 'A' + phase,
-               this->power_offset_phase_[phase].active_power_offset,
+               this->power_offset_phase_[phase].first_offset, this->power_offset_phase_[phase].second_offset);
-               this->power_offset_phase_[phase].reactive_power_offset);
     }
     ESP_LOGI(TAG, "[CALIBRATION][%s] =====================================================================\n", cs);
   }
@@ -756,36 +756,68 @@ void ATM90E32Component::save_gain_calibration_to_memory_() {
   }
 }
 
-void ATM90E32Component::save_offset_calibration_to_memory_() {
+void ATM90E32Component::finish_offset_calibration_(const OffsetCalibration (&previous)[3], bool previous_restored,
+                                                   bool previous_using_saved, OffsetCalibrationType type) {
+  const bool power_offsets = type == OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER;
   const char *cs = this->get_calibration_id_();
-  bool success = this->offset_pref_.save(&this->offset_phase_);
+  const LogString *name = offset_calibration_name(power_offsets);
-  global_preferences->sync();
+  OffsetCalibration(*offsets)[3] = power_offsets ? &this->power_offset_phase_ : &this->offset_phase_;
-  if (success) {
+  ESPPreferenceObject *preference = power_offsets ? &this->power_offset_pref_ : &this->offset_pref_;
-    this->using_saved_calibrations_ = true;
+  bool *has_stored =
-    this->restored_offset_calibration_ = true;
+      power_offsets ? &this->has_stored_power_offset_calibration_ : &this->has_stored_offset_calibration_;
-    for (bool &phase : this->offset_calibration_mismatch_)
+  bool *restored = power_offsets ? &this->restored_power_offset_calibration_ : &this->restored_offset_calibration_;
-      phase = false;
+  bool *mismatches = power_offsets ? this->power_offset_calibration_mismatch_ : this->offset_calibration_mismatch_;
-    ESP_LOGI(TAG, "[CALIBRATION][%s] Offset calibration saved to memory.", cs);
-  } else {
-    this->using_saved_calibrations_ = false;
-    ESP_LOGE(TAG, "[CALIBRATION][%s] Failed to save offset calibration to memory!", cs);
-  }
-}
 
-void ATM90E32Component::save_power_offset_calibration_to_memory_() {
+  const bool writes_verified = this->verify_offset_writes_(type);
-  const char *cs = this->get_calibration_id_();
+  bool saved = false;
-  bool success = this->power_offset_pref_.save(&this->power_offset_phase_);
+  bool synced = false;
-  global_preferences->sync();
+  if (writes_verified) {
-  if (success) {
+    saved = preference->save(offsets);
-    this->using_saved_calibrations_ = true;
+    synced = global_preferences->sync();
-    this->restored_power_offset_calibration_ = true;
-    for (bool &phase : this->power_offset_calibration_mismatch_)
-      phase = false;
-    ESP_LOGI(TAG, "[CALIBRATION][%s] Power offset calibration saved to memory.", cs);
-  } else {
-    this->using_saved_calibrations_ = false;
-    ESP_LOGE(TAG, "[CALIBRATION][%s] Failed to save power offset calibration to memory!", cs);
   }
+
+  if (writes_verified && saved && synced) {
+    this->using_saved_calibrations_ = true;
+    *has_stored = true;
+    *restored = true;
+    for (uint8_t phase = 0; phase < 3; phase++)
+      mismatches[phase] = false;
+    ESP_LOGI(TAG, "[CALIBRATION][%s] %s calibration saved to memory. %s calibration completed and verified.", cs,
+             LOG_STR_ARG(name), LOG_STR_ARG(name));
+    return;
+  }
+
+  if (writes_verified) {
+    ESP_LOGE(TAG, "[CALIBRATION][%s] Failed to save %s calibration to memory!", cs, LOG_STR_ARG(name));
+  }
+
+  for (uint8_t phase = 0; phase < 3; phase++) {
+    this->write_offsets_to_registers_(phase, previous[phase].first_offset, previous[phase].second_offset, type);
+  }
+  const bool rollback_verified = this->verify_offset_writes_(type);
+
+  bool rollback_persisted = false;
+  if (writes_verified) {
+    OffsetCalibration rollback[3]{};
+    prepare_offset_rollback(previous, previous_restored, rollback);
+    const bool rollback_saved = preference->save(&rollback);
+    const bool rollback_synced = global_preferences->sync();
+    rollback_persisted = rollback_saved && rollback_synced;
+    if (!rollback_saved || !rollback_synced) {
+      ESP_LOGE(TAG, "[CALIBRATION][%s] Failed to persist restored %s calibration values!", cs, LOG_STR_ARG(name));
+    }
+  }
+
+  *restored = previous_restored;
+  if (rollback_persisted)
+    *has_stored = previous_restored;
+  this->using_saved_calibrations_ = previous_using_saved;
+  if (!rollback_verified) {
+    ESP_LOGE(TAG, "[CALIBRATION][%s] %s calibration failed; rollback readback verification failed.", cs,
+             LOG_STR_ARG(name));
+    return;
+  }
+  ESP_LOGE(TAG, "[CALIBRATION][%s] %s calibration failed; previous values restored.", cs, LOG_STR_ARG(name));
 }
 
 void ATM90E32Component::run_offset_calibrations() {
@@ -803,11 +835,16 @@ void ATM90E32Component::run_offset_calibrations() {
   ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_voltage | offset_current |", cs);
   ESP_LOGI(TAG, "[CALIBRATION][%s] ------------------------------------------------------------------", cs);
 
+  OffsetCalibration previous_offsets[3] = {this->offset_phase_[0], this->offset_phase_[1], this->offset_phase_[2]};
+  const bool previous_restored = this->restored_offset_calibration_;
+  const bool previous_using_saved = this->using_saved_calibrations_;
+
   for (uint8_t phase = 0; phase < 3; phase++) {
     int16_t voltage_offset = calibrate_offset(phase, true);
     int16_t current_offset = calibrate_offset(phase, false);
 
-    this->write_offsets_to_registers_(phase, voltage_offset, current_offset);
+    this->write_offsets_to_registers_(phase, voltage_offset, current_offset,
+                                      OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_VOLTAGE_CURRENT);
 
     ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |     %6d      |     %6d      |", cs, 'A' + phase, voltage_offset,
              current_offset);
@@ -815,7 +852,8 @@ void ATM90E32Component::run_offset_calibrations() {
 
   ESP_LOGI(TAG, "[CALIBRATION][%s] ==================================================================\n", cs);
 
-  this->save_offset_calibration_to_memory_();
+  this->finish_offset_calibration_(previous_offsets, previous_restored, previous_using_saved,
+                                   OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_VOLTAGE_CURRENT);
 }
 
 void ATM90E32Component::run_power_offset_calibrations() {
@@ -834,18 +872,25 @@ void ATM90E32Component::run_power_offset_calibrations() {
   ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_active_power | offset_reactive_power |", cs);
   ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
 
+  OffsetCalibration previous_offsets[3] = {this->power_offset_phase_[0], this->power_offset_phase_[1],
+                                           this->power_offset_phase_[2]};
+  const bool previous_restored = this->restored_power_offset_calibration_;
+  const bool previous_using_saved = this->using_saved_calibrations_;
+
   for (uint8_t phase = 0; phase < 3; ++phase) {
     int16_t active_offset = calibrate_power_offset(phase, false);
     int16_t reactive_offset = calibrate_power_offset(phase, true);
 
-    this->write_power_offsets_to_registers_(phase, active_offset, reactive_offset);
+    this->write_offsets_to_registers_(phase, active_offset, reactive_offset,
+                                      OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER);
 
     ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |       %6d        |        %6d        |", cs, 'A' + phase, active_offset,
              reactive_offset);
   }
   ESP_LOGI(TAG, "[CALIBRATION][%s] =====================================================================\n", cs);
 
-  this->save_power_offset_calibration_to_memory_();
+  this->finish_offset_calibration_(previous_offsets, previous_restored, previous_using_saved,
+                                   OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER);
 }
 
 void ATM90E32Component::write_gains_to_registers_() {
@@ -859,35 +904,26 @@ void ATM90E32Component::write_gains_to_registers_() {
   this->write16_(ATM90E32_REGISTER_CFGREGACCEN, 0x0000);
 }
 
-void ATM90E32Component::write_offsets_to_registers_(uint8_t phase, int16_t voltage_offset, int16_t current_offset) {
+void ATM90E32Component::write_offsets_to_registers_(uint8_t phase, int16_t first_offset, int16_t second_offset,
-  // Save to runtime
+                                                    OffsetCalibrationType type) {
-  this->offset_phase_[phase].voltage_offset_ = voltage_offset;
+  const bool power_offsets = type == OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER;
-  this->phase_[phase].voltage_offset_ = voltage_offset;
+  OffsetCalibration &offsets = power_offsets ? this->power_offset_phase_[phase] : this->offset_phase_[phase];
+  offsets.first_offset = first_offset;
+  offsets.second_offset = second_offset;
+  if (power_offsets) {
+    this->phase_[phase].active_power_offset_ = first_offset;
+    this->phase_[phase].reactive_power_offset_ = second_offset;
+  } else {
+    this->phase_[phase].voltage_offset_ = first_offset;
+    this->phase_[phase].current_offset_ = second_offset;
+  }
 
-  // Save to flash-storable struct
+  const uint16_t *first_registers = power_offsets ? this->power_offset_registers : this->voltage_offset_registers;
-  this->offset_phase_[phase].current_offset_ = current_offset;
+  const uint16_t *second_registers =
-  this->phase_[phase].current_offset_ = current_offset;
+      power_offsets ? this->reactive_power_offset_registers : this->current_offset_registers;
-
-  // Write to registers
   this->write16_(ATM90E32_REGISTER_CFGREGACCEN, 0x55AA);
-  this->write16_(voltage_offset_registers[phase], static_cast<uint16_t>(voltage_offset));
+  this->write16_(first_registers[phase], static_cast<uint16_t>(first_offset));
-  this->write16_(current_offset_registers[phase], static_cast<uint16_t>(current_offset));
+  this->write16_(second_registers[phase], static_cast<uint16_t>(second_offset));
-  this->write16_(ATM90E32_REGISTER_CFGREGACCEN, 0x0000);
-}
-
-void ATM90E32Component::write_power_offsets_to_registers_(uint8_t phase, int16_t p_offset, int16_t q_offset) {
-  // Save to runtime
-  this->phase_[phase].active_power_offset_ = p_offset;
-  this->phase_[phase].reactive_power_offset_ = q_offset;
-
-  // Save to flash-storable struct
-  this->power_offset_phase_[phase].active_power_offset = p_offset;
-  this->power_offset_phase_[phase].reactive_power_offset = q_offset;
-
-  // Write to registers
-  this->write16_(ATM90E32_REGISTER_CFGREGACCEN, 0x55AA);
-  this->write16_(this->power_offset_registers[phase], static_cast<uint16_t>(p_offset));
-  this->write16_(this->reactive_power_offset_registers[phase], static_cast<uint16_t>(q_offset));
   this->write16_(ATM90E32_REGISTER_CFGREGACCEN, 0x0000);
 }
 
@@ -947,89 +983,78 @@ void ATM90E32Component::restore_gain_calibrations_() {
   ESP_LOGW(TAG, "[CALIBRATION][%s] No stored gain calibrations found. Using config file values.", cs);
 }
 
-void ATM90E32Component::restore_offset_calibrations_() {
+void ATM90E32Component::restore_offset_calibrations_(OffsetCalibrationType type) {
+  const bool power_offsets = type == OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER;
   const char *cs = this->get_calibration_id_();
+  const LogString *name = power_offsets ? LOG_STR("power offset") : LOG_STR("offset");
+  OffsetCalibration(*offsets)[3] = power_offsets ? &this->power_offset_phase_ : &this->offset_phase_;
+  OffsetCalibration(*config_offsets)[3] =
+      power_offsets ? &this->config_power_offset_phase_ : &this->config_offset_phase_;
+  ESPPreferenceObject *preference = power_offsets ? &this->power_offset_pref_ : &this->offset_pref_;
+  bool *has_stored =
+      power_offsets ? &this->has_stored_power_offset_calibration_ : &this->has_stored_offset_calibration_;
+  bool *restored = power_offsets ? &this->restored_power_offset_calibration_ : &this->restored_offset_calibration_;
+  bool *mismatches = power_offsets ? this->power_offset_calibration_mismatch_ : this->offset_calibration_mismatch_;
+  const bool *has_first = power_offsets ? this->has_config_active_power_offset_ : this->has_config_voltage_offset_;
+  const bool *has_second = power_offsets ? this->has_config_reactive_power_offset_ : this->has_config_current_offset_;
+
   for (uint8_t i = 0; i < 3; ++i)
-    this->config_offset_phase_[i] = this->offset_phase_[i];
+    (*config_offsets)[i] = (*offsets)[i];
-
-  bool have_data = this->offset_pref_.load(&this->offset_phase_);
 
+  const bool have_data = preference->load(offsets);
   bool all_zero = true;
   if (have_data) {
-    for (auto &phase : this->offset_phase_) {
+    for (const auto &phase : *offsets) {
-      if (phase.voltage_offset_ != 0 || phase.current_offset_ != 0) {
+      if (phase.first_offset != 0 || phase.second_offset != 0) {
         all_zero = false;
         break;
       }
     }
   }
 
-  if (have_data && !all_zero) {
+  *has_stored = have_data && !all_zero;
-    this->restored_offset_calibration_ = true;
+  *restored = false;
-    for (uint8_t phase = 0; phase < 3; phase++) {
+  for (uint8_t phase = 0; phase < 3; phase++) {
-      auto &offset = this->offset_phase_[phase];
+    mismatches[phase] = false;
-      bool mismatch = false;
+    if (*has_stored) {
-      if (this->has_config_voltage_offset_[phase] &&
+      mismatches[phase] =
-          offset.voltage_offset_ != this->config_offset_phase_[phase].voltage_offset_)
+          (has_first[phase] && (*offsets)[phase].first_offset != (*config_offsets)[phase].first_offset) ||
-        mismatch = true;
+          (has_second[phase] && (*offsets)[phase].second_offset != (*config_offsets)[phase].second_offset);
-      if (this->has_config_current_offset_[phase] &&
-          offset.current_offset_ != this->config_offset_phase_[phase].current_offset_)
-        mismatch = true;
-      if (mismatch)
-        this->offset_calibration_mismatch_[phase] = true;
     }
-  } else {
+  }
+
+  if (!*has_stored) {
     for (uint8_t phase = 0; phase < 3; phase++)
-      this->offset_phase_[phase] = this->config_offset_phase_[phase];
+      (*offsets)[phase] = (*config_offsets)[phase];
-    ESP_LOGW(TAG, "[CALIBRATION][%s] No stored offset calibrations found. Using default values.", cs);
+    ESP_LOGW(TAG, "[CALIBRATION][%s] No stored %s calibrations found. Using default values.", cs, LOG_STR_ARG(name));
   }
 
   for (uint8_t phase = 0; phase < 3; phase++) {
-    write_offsets_to_registers_(phase, this->offset_phase_[phase].voltage_offset_,
+    this->write_offsets_to_registers_(phase, (*offsets)[phase].first_offset, (*offsets)[phase].second_offset, type);
-                                this->offset_phase_[phase].current_offset_);
   }
-}
+  const bool initial_values_verified = this->verify_offset_writes_(type);
-
+  if (initial_values_verified) {
-void ATM90E32Component::restore_power_offset_calibrations_() {
+    const auto state = resolve_offset_restore_state(*has_stored, true, false);
-  const char *cs = this->get_calibration_id_();
+    *restored = state.restored;
-  for (uint8_t i = 0; i < 3; ++i)
+    ESP_LOGI(TAG, "[CALIBRATION][%s] %s calibration values verified.", cs, LOG_STR_ARG(name));
-    this->config_power_offset_phase_[i] = this->power_offset_phase_[i];
+    return;
-
-  bool have_data = this->power_offset_pref_.load(&this->power_offset_phase_);
-
-  bool all_zero = true;
-  if (have_data) {
-    for (auto &phase : this->power_offset_phase_) {
-      if (phase.active_power_offset != 0 || phase.reactive_power_offset != 0) {
-        all_zero = false;
-        break;
-      }
-    }
   }
 
-  if (have_data && !all_zero) {
+  this->using_saved_calibrations_ = false;
-    this->restored_power_offset_calibration_ = true;
+  for (uint8_t phase = 0; phase < 3; phase++)
-    for (uint8_t phase = 0; phase < 3; ++phase) {
+    mismatches[phase] = false;
-      auto &offset = this->power_offset_phase_[phase];
+  for (uint8_t phase = 0; phase < 3; phase++) {
-      bool mismatch = false;
+    (*offsets)[phase] = (*config_offsets)[phase];
-      if (this->has_config_active_power_offset_[phase] &&
+    this->write_offsets_to_registers_(phase, (*offsets)[phase].first_offset, (*offsets)[phase].second_offset, type);
-          offset.active_power_offset != this->config_power_offset_phase_[phase].active_power_offset)
+  }
-        mismatch = true;
+  const auto state = resolve_offset_restore_state(*has_stored, false, this->verify_offset_writes_(type));
-      if (this->has_config_reactive_power_offset_[phase] &&
+  *restored = state.restored;
-          offset.reactive_power_offset != this->config_power_offset_phase_[phase].reactive_power_offset)
+  if (state.values_verified) {
-        mismatch = true;
+    ESP_LOGE(TAG, "[CALIBRATION][%s] %s calibration restore failed verification; config values verified.", cs,
-      if (mismatch)
+             LOG_STR_ARG(name));
-        this->power_offset_calibration_mismatch_[phase] = true;
-    }
   } else {
-    for (uint8_t phase = 0; phase < 3; ++phase)
+    ESP_LOGE(TAG, "[CALIBRATION][%s] %s calibration restore and config fallback both failed verification.", cs,
-      this->power_offset_phase_[phase] = this->config_power_offset_phase_[phase];
+             LOG_STR_ARG(name));
-    ESP_LOGW(TAG, "[CALIBRATION][%s] No stored power offsets found. Using default values.", cs);
-  }
-
-  for (uint8_t phase = 0; phase < 3; ++phase) {
-    write_power_offsets_to_registers_(phase, this->power_offset_phase_[phase].active_power_offset,
-                                      this->power_offset_phase_[phase].reactive_power_offset);
   }
 }
 
@@ -1084,14 +1109,14 @@ void ATM90E32Component::clear_gain_calibrations() {
 
 void ATM90E32Component::clear_offset_calibrations() {
   const char *cs = this->get_calibration_id_();
-  if (!this->restored_offset_calibration_) {
+  if (!this->has_stored_offset_calibration_) {
     ESP_LOGI(TAG, "[CALIBRATION][%s] No stored offset calibrations to clear. Current values:", cs);
     ESP_LOGI(TAG, "[CALIBRATION][%s] --------------------------------------------------------------", cs);
     ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_voltage | offset_current |", cs);
     ESP_LOGI(TAG, "[CALIBRATION][%s] --------------------------------------------------------------", cs);
     for (uint8_t phase = 0; phase < 3; phase++) {
       ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |     %6d      |     %6d      |", cs, 'A' + phase,
-               this->offset_phase_[phase].voltage_offset_, this->offset_phase_[phase].current_offset_);
+               this->offset_phase_[phase].first_offset, this->offset_phase_[phase].second_offset);
     }
     ESP_LOGI(TAG, "[CALIBRATION][%s] ==============================================================\n", cs);
     return;
@@ -1104,10 +1129,11 @@ void ATM90E32Component::clear_offset_calibrations() {
 
   for (uint8_t phase = 0; phase < 3; phase++) {
     int16_t voltage_offset =
-        this->has_config_voltage_offset_[phase] ? this->config_offset_phase_[phase].voltage_offset_ : 0;
+        this->has_config_voltage_offset_[phase] ? this->config_offset_phase_[phase].first_offset : 0;
     int16_t current_offset =
-        this->has_config_current_offset_[phase] ? this->config_offset_phase_[phase].current_offset_ : 0;
+        this->has_config_current_offset_[phase] ? this->config_offset_phase_[phase].second_offset : 0;
-    this->write_offsets_to_registers_(phase, voltage_offset, current_offset);
+    this->write_offsets_to_registers_(phase, voltage_offset, current_offset,
+                                      OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_VOLTAGE_CURRENT);
     ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |     %6d      |     %6d      |", cs, 'A' + phase, voltage_offset,
              current_offset);
   }
@@ -1117,6 +1143,7 @@ void ATM90E32Component::clear_offset_calibrations() {
   this->offset_pref_.save(&zero_offsets);  // Clear stored values in flash
   global_preferences->sync();
 
+  this->has_stored_offset_calibration_ = false;
   this->restored_offset_calibration_ = false;
   for (bool &phase : this->offset_calibration_mismatch_)
     phase = false;
@@ -1126,15 +1153,14 @@ void ATM90E32Component::clear_offset_calibrations() {
 
 void ATM90E32Component::clear_power_offset_calibrations() {
   const char *cs = this->get_calibration_id_();
-  if (!this->restored_power_offset_calibration_) {
+  if (!this->has_stored_power_offset_calibration_) {
     ESP_LOGI(TAG, "[CALIBRATION][%s] No stored power offsets to clear. Current values:", cs);
     ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
     ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_active_power | offset_reactive_power |", cs);
     ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
     for (uint8_t phase = 0; phase < 3; phase++) {
       ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |       %6d        |        %6d        |", cs, 'A' + phase,
-               this->power_offset_phase_[phase].active_power_offset,
+               this->power_offset_phase_[phase].first_offset, this->power_offset_phase_[phase].second_offset);
-               this->power_offset_phase_[phase].reactive_power_offset);
     }
     ESP_LOGI(TAG, "[CALIBRATION][%s] =====================================================================\n", cs);
     return;
@@ -1147,20 +1173,21 @@ void ATM90E32Component::clear_power_offset_calibrations() {
 
   for (uint8_t phase = 0; phase < 3; phase++) {
     int16_t active_offset =
-        this->has_config_active_power_offset_[phase] ? this->config_power_offset_phase_[phase].active_power_offset : 0;
+        this->has_config_active_power_offset_[phase] ? this->config_power_offset_phase_[phase].first_offset : 0;
-    int16_t reactive_offset = this->has_config_reactive_power_offset_[phase]
+    int16_t reactive_offset =
-                                  ? this->config_power_offset_phase_[phase].reactive_power_offset
+        this->has_config_reactive_power_offset_[phase] ? this->config_power_offset_phase_[phase].second_offset : 0;
-                                  : 0;
+    this->write_offsets_to_registers_(phase, active_offset, reactive_offset,
-    this->write_power_offsets_to_registers_(phase, active_offset, reactive_offset);
+                                      OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER);
     ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |       %6d        |        %6d        |", cs, 'A' + phase, active_offset,
              reactive_offset);
   }
   ESP_LOGI(TAG, "[CALIBRATION][%s] =====================================================================\n", cs);
 
-  PowerOffsetCalibration zero_power_offsets[3]{{0, 0}, {0, 0}, {0, 0}};
+  OffsetCalibration zero_power_offsets[3]{{0, 0}, {0, 0}, {0, 0}};
   this->power_offset_pref_.save(&zero_power_offsets);
   global_preferences->sync();
 
+  this->has_stored_power_offset_calibration_ = false;
   this->restored_power_offset_calibration_ = false;
   for (bool &phase : this->power_offset_calibration_mismatch_)
     phase = false;
@@ -1215,6 +1242,31 @@ bool ATM90E32Component::verify_gain_writes_() {
   return success;  // Return true if all writes were successful, false otherwise
 }
 
+bool ATM90E32Component::verify_offset_writes_(OffsetCalibrationType type) {
+  const bool power_offsets = type == OffsetCalibrationType::OFFSET_CALIBRATION_TYPE_POWER;
+  const char *cs = this->get_calibration_id_();
+  const LogString *name = offset_calibration_name(power_offsets);
+  const LogString *first_name = power_offsets ? LOG_STR("active") : LOG_STR("voltage");
+  const LogString *second_name = power_offsets ? LOG_STR("reactive") : LOG_STR("current");
+  const OffsetCalibration *offsets = power_offsets ? this->power_offset_phase_ : this->offset_phase_;
+  const uint16_t *first_registers = power_offsets ? this->power_offset_registers : this->voltage_offset_registers;
+  const uint16_t *second_registers =
+      power_offsets ? this->reactive_power_offset_registers : this->current_offset_registers;
+  bool success = true;
+  for (uint8_t phase = 0; phase < 3; phase++) {
+    const uint16_t first = this->read16_(first_registers[phase]);
+    const uint16_t second = this->read16_(second_registers[phase]);
+    if (!offset_register_value_matches(first, offsets[phase].first_offset) ||
+        !offset_register_value_matches(second, offsets[phase].second_offset)) {
+      ESP_LOGE(TAG, "[CALIBRATION][%s] %s readback failed for Phase %s: %s %d/%d, %s %d/%d.", cs, LOG_STR_ARG(name),
+               phase_labels[phase], LOG_STR_ARG(first_name), static_cast<int16_t>(first), offsets[phase].first_offset,
+               LOG_STR_ARG(second_name), static_cast<int16_t>(second), offsets[phase].second_offset);
+      success = false;
+    }
+  }
+  return success;
+}
+
 #ifdef USE_TEXT_SENSOR
 void ATM90E32Component::check_phase_status() {
   uint16_t state0 = this->read16_(ATM90E32_REGISTER_EMMSTATE0);

esphome/components/atm90e32/atm90e32.h

@@ -13,6 +13,40 @@
 
 namespace esphome::atm90e32 {
 
+inline bool offset_register_value_matches(uint16_t actual, int16_t expected) {
+  return actual == static_cast<uint16_t>(expected);
+}
+
+struct OffsetCalibration {
+  int16_t first_offset{0};
+  int16_t second_offset{0};
+};
+
+static_assert(sizeof(OffsetCalibration[3]) == 12, "Offset calibration preference layout must remain compatible");
+
+enum class OffsetCalibrationType : uint8_t {
+  OFFSET_CALIBRATION_TYPE_VOLTAGE_CURRENT,
+  OFFSET_CALIBRATION_TYPE_POWER,
+};
+
+struct OffsetRestoreState {
+  bool restored;
+  bool values_verified;
+};
+
+inline OffsetRestoreState resolve_offset_restore_state(bool has_stored_values, bool initial_values_verified,
+                                                       bool fallback_values_verified) {
+  if (initial_values_verified)
+    return {has_stored_values, true};
+  return {false, fallback_values_verified};
+}
+
+inline void prepare_offset_rollback(const OffsetCalibration (&previous)[3], bool had_stored_values,
+                                    OffsetCalibration (&rollback)[3]) {
+  for (uint8_t phase = 0; phase < 3; phase++)
+    rollback[phase] = had_stored_values ? previous[phase] : OffsetCalibration{};
+}
+
 class ATM90E32Component final : public PollingComponent,
                                 public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_HIGH,
                                                       spi::CLOCK_PHASE_TRAILING, spi::DATA_RATE_1MHZ> {
@@ -71,19 +105,19 @@ class ATM90E32Component final : public PollingComponent,
     this->has_config_current_gain_[phase] = true;
   }
   void set_voltage_offset(uint8_t phase, int16_t offset) {
-    this->offset_phase_[phase].voltage_offset_ = offset;
+    this->offset_phase_[phase].first_offset = offset;
     this->has_config_voltage_offset_[phase] = true;
   }
   void set_current_offset(uint8_t phase, int16_t offset) {
-    this->offset_phase_[phase].current_offset_ = offset;
+    this->offset_phase_[phase].second_offset = offset;
     this->has_config_current_offset_[phase] = true;
   }
   void set_active_power_offset(uint8_t phase, int16_t offset) {
-    this->power_offset_phase_[phase].active_power_offset = offset;
+    this->power_offset_phase_[phase].first_offset = offset;
     this->has_config_active_power_offset_[phase] = true;
   }
   void set_reactive_power_offset(uint8_t phase, int16_t offset) {
-    this->power_offset_phase_[phase].reactive_power_offset = offset;
+    this->power_offset_phase_[phase].second_offset = offset;
     this->has_config_reactive_power_offset_[phase] = true;
   }
   void set_freq_sensor(sensor::Sensor *freq_sensor) { freq_sensor_ = freq_sensor; }
@@ -171,16 +205,16 @@ class ATM90E32Component final : public PollingComponent,
   float get_chip_temperature_();
   bool get_publish_interval_flag_() { return publish_interval_flag_; };
   void set_publish_interval_flag_(bool flag) { publish_interval_flag_ = flag; };
-  void restore_offset_calibrations_();
+  void restore_offset_calibrations_(OffsetCalibrationType type);
-  void restore_power_offset_calibrations_();
   void restore_gain_calibrations_();
-  void save_offset_calibration_to_memory_();
   void save_gain_calibration_to_memory_();
-  void save_power_offset_calibration_to_memory_();
+  void finish_offset_calibration_(const OffsetCalibration (&previous)[3], bool previous_restored,
-  void write_offsets_to_registers_(uint8_t phase, int16_t voltage_offset, int16_t current_offset);
+                                  bool previous_using_saved, OffsetCalibrationType type);
-  void write_power_offsets_to_registers_(uint8_t phase, int16_t p_offset, int16_t q_offset);
+  void write_offsets_to_registers_(uint8_t phase, int16_t first_offset, int16_t second_offset,
+                                   OffsetCalibrationType type);
   void write_gains_to_registers_();
   bool verify_gain_writes_();
+  bool verify_offset_writes_(OffsetCalibrationType type);
   bool validate_spi_read_(uint16_t expected, const char *context = nullptr);
   void log_calibration_status_();
   const char *get_calibration_id_();
@@ -219,19 +253,10 @@ class ATM90E32Component final : public PollingComponent,
     uint32_t cumulative_reverse_active_energy_{0};
   } phase_[3];
 
-  struct OffsetCalibration {
+  OffsetCalibration offset_phase_[3];
-    int16_t voltage_offset_{0};
-    int16_t current_offset_{0};
-  } offset_phase_[3];
-
   OffsetCalibration config_offset_phase_[3];
-
+  OffsetCalibration power_offset_phase_[3];
-  struct PowerOffsetCalibration {
+  OffsetCalibration config_power_offset_phase_[3];
-    int16_t active_power_offset{0};
-    int16_t reactive_power_offset{0};
-  } power_offset_phase_[3];
-
-  PowerOffsetCalibration config_power_offset_phase_[3];
 
   struct GainCalibration {
     uint16_t voltage_gain{1};
@@ -265,6 +290,8 @@ class ATM90E32Component final : public PollingComponent,
   bool enable_offset_calibration_{false};
   bool enable_gain_calibration_{false};
   const char *instance_id_{nullptr};
+  bool has_stored_offset_calibration_{false};
+  bool has_stored_power_offset_calibration_{false};
   bool restored_offset_calibration_{false};
   bool restored_power_offset_calibration_{false};
   bool restored_gain_calibration_{false};

esphome/components/audio/audio_decoder.cpp

@@ -313,9 +313,10 @@ FileDecoderState AudioDecoder::decode_mp3_() {
       this->output_transfer_buffer_->increase_buffer_length(
           this->audio_stream_info_.value().frames_to_bytes(samples_decoded));
     }
-  } else if (result == micro_mp3::MP3_STREAM_INFO_READY) {
+  } else if (result == micro_mp3::MP3_STREAM_INFO_READY || result == micro_mp3::MP3_STREAM_INFO_CHANGED) {
-    // First successful header parse: capture stream info and resize the output buffer to fit one full frame.
+    // Header parsed: capture stream info and resize the output buffer to fit one full frame.
-    // microMP3 always outputs 16-bit PCM.
+    // microMP3 always outputs 16-bit PCM. MP3_STREAM_INFO_CHANGED is handled identically: despite its
+    // negative value it is documented as recoverable, so it must not reach the catch-all below.
     this->audio_stream_info_ =
         audio::AudioStreamInfo(16, this->mp3_decoder_->get_channels(), this->mp3_decoder_->get_sample_rate());
     this->free_buffer_required_ =

esphome/components/audio/audio_reader.cpp

@@ -58,6 +58,9 @@ esp_err_t AudioReader::add_sink(const std::weak_ptr<ring_buffer::RingBuffer> &ou
   if (current_audio_file_ != nullptr) {
     // A transfer buffer isn't ncessary for a local file
     this->file_ring_buffer_ = output_ring_buffer.lock();
+    if (this->file_ring_buffer_ == nullptr) {
+      return ESP_ERR_INVALID_STATE;
+    }
     return ESP_OK;
   }
 

esphome/components/audio/audio_transfer_buffer.cpp

@@ -51,14 +51,14 @@ void AudioTransferBuffer::increase_buffer_length(size_t bytes) { this->buffer_le
 
 void AudioTransferBuffer::clear_buffered_data() {
   this->buffer_length_ = 0;
-  if (this->ring_buffer_.use_count() > 0) {
+  if (this->ring_buffer_ != nullptr) {
     this->ring_buffer_->reset();
   }
 }
 
 void AudioSinkTransferBuffer::clear_buffered_data() {
   this->buffer_length_ = 0;
-  if (this->ring_buffer_.use_count() > 0) {
+  if (this->ring_buffer_ != nullptr) {
     this->ring_buffer_->reset();
   }
 #ifdef USE_SPEAKER
@@ -69,7 +69,7 @@ void AudioSinkTransferBuffer::clear_buffered_data() {
 }
 
 bool AudioTransferBuffer::has_buffered_data() const {
-  if (this->ring_buffer_.use_count() > 0) {
+  if (this->ring_buffer_ != nullptr) {
     return ((this->ring_buffer_->available() > 0) || (this->available() > 0));
   }
   return (this->available() > 0);
@@ -144,7 +144,7 @@ size_t AudioSourceTransferBuffer::transfer_data_from_source(TickType_t ticks_to_
   size_t bytes_to_read = AudioTransferBuffer::free();
   size_t bytes_read = 0;
   if (bytes_to_read > 0) {
-    if (this->ring_buffer_.use_count() > 0) {
+    if (this->ring_buffer_ != nullptr) {
       bytes_read = this->ring_buffer_->read((void *) this->get_buffer_end(), bytes_to_read, ticks_to_wait);
     }
 
@@ -161,7 +161,7 @@ size_t AudioSinkTransferBuffer::transfer_data_to_sink(TickType_t ticks_to_wait,
       bytes_written = this->speaker_->play(this->data_start_, this->available(), ticks_to_wait);
     } else
 #endif
-        if (this->ring_buffer_.use_count() > 0) {
+        if (this->ring_buffer_ != nullptr) {
       bytes_written =
           this->ring_buffer_->write_without_replacement((void *) this->data_start_, this->available(), ticks_to_wait);
     } else if (this->sink_callback_ != nullptr) {
@@ -186,7 +186,7 @@ bool AudioSinkTransferBuffer::has_buffered_data() const {
     return (this->speaker_->has_buffered_data() || (this->available() > 0));
   }
 #endif
-  if (this->ring_buffer_.use_count() > 0) {
+  if (this->ring_buffer_ != nullptr) {
     return ((this->ring_buffer_->available() > 0) || (this->available() > 0));
   }
   return (this->available() > 0);

esphome/components/ble_client/automation.h

@@ -22,6 +22,23 @@ class Automation {
   static const char *const TAG;
 };
 
+// Base for nodes that never read the parent's services.
+// The parent releases its services only once every node reports Established, so a node that never
+// reports it keeps that memory allocated for the life of the connection.
+class BLEClientServicelessNode : public BLEClientNode {
+ public:
+  // Final so that Established is always reported on SEARCH_CMPL, before the derived node sees the event.
+  void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) final {
+    if (event == ESP_GATTC_SEARCH_CMPL_EVT)
+      this->node_state = espbt::ClientState::ESTABLISHED;
+    this->on_gattc_event(event, gattc_if, param);
+  }
+
+ protected:
+  // Derived nodes handle GATT events here rather than by overriding the handler above.
+  virtual void on_gattc_event(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) {}
+};
+
 // implement on_connect automation.
 class BLEClientConnectTrigger final : public Trigger<>, public BLEClientNode {
  public:
@@ -61,7 +78,7 @@ class BLEClientDisconnectTrigger final : public Trigger<>, public BLEClientNode
   }
 };
 
-class BLEClientPasskeyRequestTrigger final : public Trigger<>, public BLEClientNode {
+class BLEClientPasskeyRequestTrigger final : public Trigger<>, public BLEClientServicelessNode {
  public:
   explicit BLEClientPasskeyRequestTrigger(BLEClient *parent) { parent->register_ble_node(this); }
   void loop() override {}
@@ -71,7 +88,7 @@ class BLEClientPasskeyRequestTrigger final : public Trigger<>, public BLEClientN
   }
 };
 
-class BLEClientPasskeyNotificationTrigger final : public Trigger<uint32_t>, public BLEClientNode {
+class BLEClientPasskeyNotificationTrigger final : public Trigger<uint32_t>, public BLEClientServicelessNode {
  public:
   explicit BLEClientPasskeyNotificationTrigger(BLEClient *parent) { parent->register_ble_node(this); }
   void loop() override {}
@@ -82,7 +99,7 @@ class BLEClientPasskeyNotificationTrigger final : public Trigger<uint32_t>, publ
   }
 };
 
-class BLEClientNumericComparisonRequestTrigger final : public Trigger<uint32_t>, public BLEClientNode {
+class BLEClientNumericComparisonRequestTrigger final : public Trigger<uint32_t>, public BLEClientServicelessNode {
  public:
   explicit BLEClientNumericComparisonRequestTrigger(BLEClient *parent) { parent->register_ble_node(this); }
   void loop() override {}
@@ -315,19 +332,17 @@ template<typename... Ts> class BLEClientRemoveBondAction final : public Action<T
   BLEClient *parent_{nullptr};
 };
 
-template<typename... Ts> class BLEClientConnectAction final : public Action<Ts...>, public BLEClientNode {
+template<typename... Ts> class BLEClientConnectAction final : public Action<Ts...>, public BLEClientServicelessNode {
  public:
   BLEClientConnectAction(BLEClient *ble_client) {
     ble_client->register_ble_node(this);
     ble_client_ = ble_client;
   }
-  void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
+  void on_gattc_event(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) override {
-                           esp_ble_gattc_cb_param_t *param) override {
     if (this->num_running_ == 0)
       return;
     switch (event) {
       case ESP_GATTC_SEARCH_CMPL_EVT:
-        this->node_state = espbt::ClientState::ESTABLISHED;
         this->parent()->run_later([this]() { this->play_next_tuple_(this->var_); });
         break;
       // if the connection is closed, terminate the automation chain.
@@ -364,14 +379,13 @@ template<typename... Ts> class BLEClientConnectAction final : public Action<Ts..
   std::tuple<Ts...> var_{};
 };
 
-template<typename... Ts> class BLEClientDisconnectAction final : public Action<Ts...>, public BLEClientNode {
+template<typename... Ts> class BLEClientDisconnectAction final : public Action<Ts...>, public BLEClientServicelessNode {
  public:
   BLEClientDisconnectAction(BLEClient *ble_client) {
     ble_client->register_ble_node(this);
     ble_client_ = ble_client;
   }
-  void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
+  void on_gattc_event(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) override {
-                           esp_ble_gattc_cb_param_t *param) override {
     if (this->num_running_ == 0)
       return;
     switch (event) {

esphome/components/dallas_temp/dallas_temp.cpp

@@ -6,6 +6,7 @@ namespace esphome::dallas_temp {
 static const char *const TAG = "dallas.temp.sensor";
 
 static const uint8_t DALLAS_MODEL_DS18S20 = 0x10;
+static const uint8_t DALLAS_MODEL_DS18B20 = 0x28;
 static const uint8_t DALLAS_COMMAND_START_CONVERSION = 0x44;
 static const uint8_t DALLAS_COMMAND_READ_SCRATCH_PAD = 0xBE;
 static const uint8_t DALLAS_COMMAND_WRITE_SCRATCH_PAD = 0x4E;
@@ -154,7 +155,14 @@ float DallasTemperatureSensor::get_temp_c_() {
     default:
       break;
   }
-
+  // undocumented test for powerup measurement of 85
+  // https://github.com/cpetrich/counterfeit_DS18B20#solution-to-the-85-c-problem
+  if ((this->address_ & 0xff) == DALLAS_MODEL_DS18B20) {
+    if ((temp == 85 * 16) && (this->scratch_pad_[6] == 0xc)) {
+      ESP_LOGD(TAG, "dropping reading caused by sensor reset");
+      return NAN;
+    }
+  }
   return temp / 16.0f;
 }
 

esphome/components/debug/debug_esp32.cpp

@@ -66,11 +66,15 @@ const char *DebugComponent::get_reset_reason_(std::span<char, RESET_REASON_BUFFE
 
   unsigned reason = esp_reset_reason();
   if (reason < sizeof(RESET_REASONS) / sizeof(RESET_REASONS[0])) {
-    if (reason == ESP_RST_SW) {
+    if (reason == ESP_RST_SW || reason == ESP_RST_WDT) {
+      // On some ESP32-S3 configurations (e.g. SPIRAM with fetch-instructions/rodata),
+      // esp_restart() intermittently produces RTCWDT_RTC_RST (ESP_RST_WDT) instead of
+      // ESP_RST_SW. Check the stored reboot source for both reset reasons so a software
+      // reboot that ends up as WDT still reports the correct source.
       auto pref = global_preferences->make_preference(REBOOT_MAX_LEN,
                                                       fnv1_hash_extend(fnv1_hash(REBOOT_KEY), App.get_name().c_str()));
       char reboot_source[REBOOT_MAX_LEN]{};
-      if (pref.load(&reboot_source)) {
+      if (pref.load(&reboot_source) && reboot_source[0] != '\0') {
         reboot_source[REBOOT_MAX_LEN - 1] = '\0';
         snprintf(buf, size, "Reboot request from %s", reboot_source);
       } else {

esphome/components/debug/sensor.py

@@ -23,11 +23,7 @@ from esphome.const import (
 )
 from esphome.types import ConfigType
 
-from . import (  # noqa: F401  pylint: disable=unused-import
+from . import CONF_DEBUG_ID, FILTER_SOURCE_FILES, DebugComponent  # noqa: F401  pylint: disable=unused-import
-    CONF_DEBUG_ID,
-    FILTER_SOURCE_FILES,
-    DebugComponent,
-)
 
 DEPENDENCIES = ["debug"]
 

esphome/components/debug/text_sensor.py

@@ -9,11 +9,7 @@ from esphome.const import (
 )
 from esphome.types import ConfigType
 
-from . import (  # noqa: F401  pylint: disable=unused-import
+from . import CONF_DEBUG_ID, FILTER_SOURCE_FILES, DebugComponent  # noqa: F401  pylint: disable=unused-import
-    CONF_DEBUG_ID,
-    FILTER_SOURCE_FILES,
-    DebugComponent,
-)
 
 DEPENDENCIES = ["debug"]
 

esphome/components/esp32/const.py

@@ -3,18 +3,11 @@ import esphome.codegen as cg
 # Re-exported for the many esp32-side users; defined in esphome.const
 # and esphome.espidf so the upload/logs fast path can use them without
 # importing this package.
-from esphome.const import (  # noqa: F401  # pylint: disable=unused-import
+from esphome.const import KEY_ESP32, KEY_FLASH_SIZE, KEY_IDF_VERSION, KEY_VARIANT  # noqa: F401  # pylint: disable=unused-import
-    KEY_ESP32,
-    KEY_FLASH_SIZE,
-    KEY_IDF_VERSION,
-    KEY_VARIANT,
-)
 
 # Back compat for external components only; in-tree callers import it
 # from esphome.espidf directly.
-from esphome.espidf import (  # noqa: F401  # pylint: disable=unused-import
+from esphome.espidf import variant_to_idf_target  # noqa: F401  # pylint: disable=unused-import
-    variant_to_idf_target,
-)
 
 KEY_BOARD = "board"
 KEY_SDKCONFIG_OPTIONS = "sdkconfig_options"

esphome/components/esphome/ota/__init__.py

@@ -283,10 +283,18 @@ FINAL_VALIDATE_SCHEMA = ota_esphome_final_validate
 
 
 FILTER_SOURCE_FILES = filter_source_files_from_defines(
-    {"ota_esphome_noise.cpp": "USE_OTA_ENCRYPTION"}
+    {
+        "ota_esphome_noise.cpp": "USE_OTA_ENCRYPTION",
+        "ota_esphome_inflate.c": "USE_OTA_DEFLATE",
+    }
 )
 
 
+def enable_deflate() -> None:
+    """Compile the on-the-fly inflater for compressed uploads."""
+    cg.add_define("USE_OTA_DEFLATE")
+
+
 @coroutine_with_priority(CoroPriority.OTA_UPDATES)
 async def to_code(config: ConfigType) -> None:
     var = cg.new_Pvariable(config[CONF_ID])
@@ -305,6 +313,10 @@ async def to_code(config: ConfigType) -> None:
     if config.get(CONF_ALLOW_PARTITION_ACCESS):
         cg.add_define("USE_OTA_PARTITIONS")
 
+    # ESP8266 and RP2040 inflate gzip at reboot; the rest inflate on the fly
+    if not (CORE.is_esp8266 or CORE.is_rp2):
+        enable_deflate()
+
     # One key per device: an api encryption block supplies it (static or
     # runtime) and offers; the ota block only adds the requirement
     api_conf = CORE.config.get(CONF_API) or {}

esphome/components/esphome/ota/ota_esphome.cpp

@@ -22,8 +22,11 @@
 #include "esphome/core/lwip_fast_select.h"
 #endif
 
+#include <algorithm>
 #include <cerrno>
 #include <cstdio>
+#include <cstring>
+#include <new>
 #include <sys/time.h>
 
 namespace esphome {
@@ -41,7 +44,12 @@ const noise::NoiseContext &ESPHomeOTAComponent::noise_context_() const {
 #endif
 static constexpr uint16_t OTA_BLOCK_SIZE = 8192;
 static constexpr uint32_t OTA_SOCKET_TIMEOUT_HANDSHAKE = 20000;  // milliseconds for initial handshake
-static constexpr uint32_t OTA_SOCKET_TIMEOUT_DATA = 90000;       // milliseconds for data transfer
+// Milliseconds for data transfer. Covers the lwIP retransmit run seen in
+// practice for a lost chunk ack (1.5 + 3 + 6 + 12 + 24 + 48 s); the CLI waits
+// longer (espota2.DATA_PHASE_TIMEOUT) so the device is free before it retries
+static constexpr uint32_t OTA_SOCKET_TIMEOUT_DATA = 105000;
+static constexpr uint32_t OTA_PROGRESS_INTERVAL_MS = 1000;
+static constexpr size_t OTA_SIZE_FIELD_BYTES = 4;  // sizes on the wire are 4 bytes MSB first
 
 // Single-instance pointer — multi-port configs are rejected in final_validate.
 // NOLINTNEXTLINE(cppcoreguidelines-avoid-non-const-global-variables)
@@ -179,12 +187,23 @@ static constexpr uint8_t CLIENT_FEATURE_SUPPORTS_COMPRESSION = 0x01;
 static constexpr uint8_t CLIENT_FEATURE_SUPPORTS_SHA256_AUTH = 0x02;
 static constexpr uint8_t CLIENT_FEATURE_SUPPORTS_EXTENDED_PROTOCOL = 0x04;
 static constexpr uint8_t CLIENT_FEATURE_SUPPORTS_NOISE = 0x08;
+static constexpr uint8_t CLIENT_FEATURE_SUPPORTS_DEFLATE = 0x10;
 // Noise needs the extended protocol: the prologue binds the 2-byte feature ack
 static constexpr uint8_t CLIENT_NOISE_FEATURES =
     CLIENT_FEATURE_SUPPORTS_NOISE | CLIENT_FEATURE_SUPPORTS_EXTENDED_PROTOCOL;
 static constexpr uint8_t SERVER_FEATURE_SUPPORTS_COMPRESSION = 0x01;
 static constexpr uint8_t SERVER_FEATURE_SUPPORTS_PARTITION_ACCESS = 0x02;
 static constexpr uint8_t SERVER_FEATURE_SUPPORTS_NOISE = 0x04;
+// Raw deflate, window <= OTA_INFLATE_WINDOW_SIZE. Binding once offered: the
+// client must then send the image size frame and a deflate stream.
+static constexpr uint8_t SERVER_FEATURE_SUPPORTS_DEFLATE = 0x08;
+
+#ifdef USE_OTA_ENCRYPTION
+inline bool ESPHomeOTAComponent::noise_offered_() const {
+  return (this->handshake_buf_[1] & SERVER_FEATURE_SUPPORTS_NOISE) != 0 &&
+         (this->ota_features_ & CLIENT_NOISE_FEATURES) == CLIENT_NOISE_FEATURES;
+}
+#endif
 
 inline bool ESPHomeOTAComponent::extended_proto_() const {
 #ifdef USE_OTA_ENCRYPTION_REQUIRED
@@ -290,7 +309,7 @@ void ESPHomeOTAComponent::handle_handshake_() {
       this->transition_ota_state_(OTAState::FEATURE_ACK);
 
       const bool supports_compression =
-          (this->ota_features_ & CLIENT_FEATURE_SUPPORTS_COMPRESSION) != 0 && this->backend_->supports_compression();
+          (this->ota_features_ & CLIENT_FEATURE_SUPPORTS_COMPRESSION) != 0 && ota::OTABackend::supports_compression();
 
       // Compose the feature-ack response. When the client negotiates the extended protocol we emit
       // a 2-byte response (marker + server feature flags); otherwise we emit the single-byte
@@ -310,6 +329,26 @@ void ESPHomeOTAComponent::handle_handshake_() {
 #elif defined(USE_OTA_ENCRYPTION)
         // A yaml key always exists: validation rejects the all-zeros key
         this->handshake_buf_[1] |= SERVER_FEATURE_SUPPORTS_NOISE;
+#endif
+#ifdef USE_OTA_ENCRYPTION
+        // Reserve the noise session before the optional inflate buffer, so the
+        // required allocation is not starved by the compression window
+        if (this->noise_offered_()) {
+          this->noise_reserve_session_();
+        }
+#endif
+#ifdef USE_OTA_DEFLATE
+        // Offered only once the session memory is in hand; else uncompressed
+        if ((this->ota_features_ & CLIENT_FEATURE_SUPPORTS_DEFLATE) != 0) {
+          // Value initialized: a corrupt stream that back references the
+          // window before it is filled then copies zeros, never stale memory
+          this->inflate_.reset(new (std::nothrow) InflateSession());
+          if (this->inflate_ != nullptr) {
+            this->handshake_buf_[1] |= SERVER_FEATURE_SUPPORTS_DEFLATE;
+          } else {
+            ESP_LOGW(TAG, "No memory to inflate");
+          }
+        }
 #endif
       } else {
         this->handshake_buf_[0] =
@@ -328,8 +367,7 @@ void ESPHomeOTAComponent::handle_handshake_() {
 #ifdef USE_OTA_ENCRYPTION
       // Latch the offer actually sent: a key activating between the two
       // states must not start a session the client never expects
-      if ((this->handshake_buf_[1] & SERVER_FEATURE_SUPPORTS_NOISE) != 0 &&
+      if (this->noise_offered_()) {
-          (this->ota_features_ & CLIENT_NOISE_FEATURES) == CLIENT_NOISE_FEATURES) {
         // handshake_buf_ still holds the feature ack composed above; a
         // would-block re-entry lands here without rebuilding it
         if (!this->noise_start_session_(this->handshake_buf_[1])) {
@@ -427,16 +465,11 @@ void ESPHomeOTAComponent::handle_data_() {
   // Backend calls overwrite this with OK; reset to UNKNOWN before any
   // goto error that follows a successful begin()/write()
   ota::OTAResponseTypes error_code = ota::OTA_RESPONSE_ERROR_UNKNOWN;
-  size_t total = 0;
+  DataTransfer xfer;
-  uint32_t last_progress = 0;
-  uint32_t last_data_ms = 0;
   uint8_t buf[OTA_BUFFER_SIZE];
   char *sbuf = reinterpret_cast<char *>(buf);
-  size_t ota_size;
+  size_t image_size;
   ota::OTAType ota_type = ota::OTA_TYPE_UPDATE_APP;
-#if USE_OTA_VERSION == 2
-  size_t size_acknowledged = 0;
-#endif
 
   // Set socket timeouts and blocking mode (see strategy table above)
   struct timeval tv;
@@ -459,14 +492,13 @@ void ESPHomeOTAComponent::handle_data_() {
   }
   ESP_LOGV(TAG, "OTA type is 0x%02x", ota_type);
 
-  // Read size, 4 bytes MSB first
+  if (!this->read_size_(buf, xfer.ota_size, LOG_STR("size")))
-  if (!this->data_readall_(buf, 4)) {
-    this->log_read_error_(LOG_STR("size"));
     goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
-  }
+  image_size = xfer.ota_size;
-  ota_size = (static_cast<size_t>(buf[0]) << 24) | (static_cast<size_t>(buf[1]) << 16) |
+#ifdef USE_OTA_DEFLATE
-             (static_cast<size_t>(buf[2]) << 8) | buf[3];
+  if (this->inflate_ != nullptr && !this->read_size_(buf, image_size, LOG_STR("image size")))
-  ESP_LOGV(TAG, "Size is %zu bytes", ota_size);
+    goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
+#endif
 
 #ifndef USE_OTA_PARTITIONS
   if (ota_type != ota::OTA_TYPE_UPDATE_APP) {
@@ -486,7 +518,7 @@ void ESPHomeOTAComponent::handle_data_() {
 #endif
 
   // begin() returns quickly; flash sectors are erased incrementally during write().
-  error_code = this->backend_->begin(ota_size, ota_type);
+  error_code = this->backend_->begin(image_size, ota_type);
   if (error_code != ota::OTA_RESPONSE_OK)
     goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
 
@@ -506,75 +538,25 @@ void ESPHomeOTAComponent::handle_data_() {
   // Acknowledge MD5 OK - 1 byte
   this->data_write_byte_(ota::OTA_RESPONSE_BIN_MD5_OK);
 
-  // Track when we last received data so a silently-vanished peer (no FIN/RST
+  xfer.last_data_ms = millis();
-  // delivered, e.g. uploader killed mid-transfer or NAT/router dropped state)
+#ifdef USE_OTA_DEFLATE
-  // can't wedge the device indefinitely. Without this, the loop only exits
+  if (this->inflate_ != nullptr) {
-  // on actual data, EOF, or a non-EWOULDBLOCK error from read(), and lwIP
+    error_code = this->inflate_data_(buf, image_size, xfer);
-  // TCP keepalive isn't enabled here.
+    if (error_code != ota::OTA_RESPONSE_OK)
-  last_data_ms = millis();
-  while (total < ota_size) {
-    if (millis() - last_data_ms > OTA_SOCKET_TIMEOUT_DATA) {
-      ESP_LOGW(TAG, "No data received for %u ms", (unsigned) OTA_SOCKET_TIMEOUT_DATA);
-      error_code = ota::OTA_RESPONSE_ERROR_UNKNOWN;
       goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
-    }
+  } else
-    size_t remaining = ota_size - total;
+#endif
-    size_t requested = remaining < OTA_BUFFER_SIZE ? remaining : OTA_BUFFER_SIZE;
+  {
-    ssize_t read;
+    while (xfer.total < xfer.ota_size) {
-#ifdef USE_OTA_ENCRYPTION
+      ssize_t read = this->receive_data_(buf, xfer);
-    if (this->noise_ != nullptr) {
+      if (read < 0) {
-      // One frame per call; noise_read_data_ waits internally (readall_), so
-      // there is no would-block retry here and failures are already logged.
-      read = this->noise_read_data_(buf, requested);
-      if (read <= 0) {
         error_code = ota::OTA_RESPONSE_ERROR_UNKNOWN;
         goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
       }
-    } else
+      error_code = this->write_flash_(buf, read);
-#endif
+      if (error_code != ota::OTA_RESPONSE_OK)
-    {
-      read = this->client_->read(buf, requested);
-      if (read == -1) {
-        const int err = errno;
-        if (this->would_block_(err)) {
-          // read() already waited up to SO_RCVTIMEO for data, just feed WDT
-          App.feed_wdt();
-          continue;
-        }
-        ESP_LOGW(TAG, "Read err %d", err);
-        error_code = ota::OTA_RESPONSE_ERROR_UNKNOWN;
         goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
-      } else if (read == 0) {
+      this->ack_written_(xfer);
-        ESP_LOGW(TAG, "Remote closed");
-        error_code = ota::OTA_RESPONSE_ERROR_UNKNOWN;
-        goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
-      }
-    }
-
-    last_data_ms = millis();
-    error_code = this->backend_->write(buf, read);
-    if (error_code != ota::OTA_RESPONSE_OK) {
-      ESP_LOGW(TAG, "Flash write err %d", error_code);
-      goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
-    }
-    total += read;
-#if USE_OTA_VERSION == 2
-    while (size_acknowledged + OTA_BLOCK_SIZE <= total || (total == ota_size && size_acknowledged < ota_size)) {
-      this->data_write_byte_(ota::OTA_RESPONSE_CHUNK_OK);
-      size_acknowledged += OTA_BLOCK_SIZE;
-    }
-#endif
-
-    uint32_t now = millis();
-    if (now - last_progress > 1000) {
-      last_progress = now;
-      float percentage = (total * 100.0f) / ota_size;
-      ESP_LOGD(TAG, "Progress: %0.1f%%", percentage);
-#ifdef USE_OTA_STATE_LISTENER
-      this->notify_state_(ota::OTA_IN_PROGRESS, percentage, 0);
-#endif
-      // feed watchdog and give other tasks a chance to run
-      this->yield_and_feed_watchdog_();
     }
   }
 
@@ -771,6 +753,171 @@ bool ESPHomeOTAComponent::try_write_(size_t to_write, const LogString *desc) {
   return this->handshake_buf_pos_ >= to_write;
 }
 
+bool ESPHomeOTAComponent::read_size_(uint8_t *buf, size_t &size, const LogString *desc) {
+  if (!this->data_readall_(buf, OTA_SIZE_FIELD_BYTES)) {
+    this->log_read_error_(desc);
+    return false;
+  }
+  size = encode_uint32(buf[0], buf[1], buf[2], buf[3]);
+  ESP_LOGV(TAG, "%s is %zu bytes", LOG_STR_ARG(desc), size);
+  return true;
+}
+
+ota::OTAResponseTypes ESPHomeOTAComponent::write_flash_(uint8_t *data, size_t len) {
+  ota::OTAResponseTypes result = this->backend_->write(data, len);
+  if (result != ota::OTA_RESPONSE_OK) {
+    ESP_LOGW(TAG, "Flash write err %d", result);
+  }
+  return result;
+}
+
+ssize_t ESPHomeOTAComponent::receive_data_(uint8_t *buf, DataTransfer &xfer) {
+  const size_t remaining = xfer.ota_size - xfer.total;
+  const size_t requested = std::min(remaining, OTA_BUFFER_SIZE);
+  ssize_t read;
+  for (;;) {
+    // A silently-vanished peer (no FIN/RST delivered, e.g. uploader killed
+    // mid-transfer or NAT/router dropped state) must not wedge the device:
+    // read() only fails on EOF or a real error, and lwIP TCP keepalive isn't
+    // enabled here.
+    if (millis() - xfer.last_data_ms > OTA_SOCKET_TIMEOUT_DATA) {
+      ESP_LOGW(TAG, "No data received for %u ms", (unsigned) OTA_SOCKET_TIMEOUT_DATA);
+      return -1;
+    }
+#ifdef USE_OTA_ENCRYPTION
+    if (this->noise_ != nullptr) {
+      // One frame per call; noise_read_data_ waits internally (readall_), so
+      // there is no would-block retry here and failures are already logged.
+      read = this->noise_read_data_(buf, requested);
+      if (read <= 0)
+        return -1;
+      break;
+    }
+#endif
+    read = this->client_->read(buf, requested);
+    if (read > 0)
+      break;
+    if (read == 0) {
+      this->log_remote_closed_(LOG_STR("data"));
+      return -1;
+    }
+    if (!this->would_block_(errno)) {
+      this->log_socket_error_(LOG_STR("data"));
+      return -1;
+    }
+    // read() already waited up to SO_RCVTIMEO for data, just feed WDT
+    App.feed_wdt();
+  }
+
+  const uint32_t now = millis();
+  xfer.last_data_ms = now;
+  xfer.total += read;
+  this->ack_received_(xfer);
+  if (now - xfer.last_progress > OTA_PROGRESS_INTERVAL_MS) {
+    xfer.last_progress = now;
+    float percentage = (xfer.total * 100.0f) / xfer.ota_size;
+    ESP_LOGD(TAG, "Progress: %0.1f%%", percentage);
+#ifdef USE_OTA_STATE_LISTENER
+    this->notify_state_(ota::OTA_IN_PROGRESS, percentage, 0);
+#endif
+    // feed watchdog and give other tasks a chance to run
+    this->yield_and_feed_watchdog_();
+  }
+  return read;
+}
+
+void ESPHomeOTAComponent::send_chunk_acks_(DataTransfer &xfer) {
+#if USE_OTA_VERSION == 2
+  while (xfer.acknowledged + OTA_BLOCK_SIZE <= xfer.total ||
+         (xfer.total == xfer.ota_size && xfer.acknowledged < xfer.ota_size)) {
+    this->data_write_byte_(ota::OTA_RESPONSE_CHUNK_OK);
+    xfer.acknowledged += OTA_BLOCK_SIZE;
+  }
+#endif
+}
+
+#ifdef USE_OTA_DEFLATE
+// The window doubles as the output buffer; flushed bytes stay as back
+// reference history for the next windowful.
+ota::OTAResponseTypes ESPHomeOTAComponent::inflate_flush_(InflateSession &session) {
+  const size_t produced = session.dest - session.window;
+  const size_t pending = produced - session.flushed;
+  if (pending != 0) {
+    if (pending > session.image_size - session.written) {
+      ESP_LOGW(TAG, "Inflate overrun");
+      return ota::OTA_RESPONSE_ERROR_UNKNOWN;
+    }
+    ota::OTAResponseTypes result = this->write_flash_(session.window + session.flushed, pending);
+    if (result != ota::OTA_RESPONSE_OK)
+      return result;
+    session.flushed = produced;
+    session.written += pending;
+    // A compressible region yields many windows per socket read
+    App.feed_wdt();
+  }
+  // Even with nothing new written: a block boundary can fall inside a header
+  this->ack_written_(*session.xfer);
+  return ota::OTA_RESPONSE_OK;
+}
+
+ota::OTAResponseTypes ESPHomeOTAComponent::inflate_data_(uint8_t *in, size_t image_size, DataTransfer &xfer) {
+  InflateSession &session = *this->inflate_;
+  session.self = this;
+  session.xfer = &xfer;
+  session.in = in;
+  session.image_size = image_size;
+  session.written = 0;
+  session.error = ota::OTA_RESPONSE_OK;
+  ota_inflate_init(&session, session.window, OTA_INFLATE_WINDOW_SIZE);
+  // Where the ack must follow the write, flush and ack before waiting for
+  // input, or the client waits for an ack while the decoder waits for data
+  session.source_read_cb = [](OtaInflateState *d) -> int {
+    auto *s = static_cast<InflateSession *>(d);
+    if (ACK_AFTER_WRITE) {
+      s->error = s->self->inflate_flush_(*s);
+      if (s->error != ota::OTA_RESPONSE_OK)
+        return -1;
+    }
+    // More input than announced; reported by the size check below
+    if (s->xfer->total >= s->xfer->ota_size)
+      return -1;
+    ssize_t read = s->self->receive_data_(s->in, *s->xfer);
+    if (read <= 0) {
+      // Already logged by receive_data_
+      s->error = ota::OTA_RESPONSE_ERROR_UNKNOWN;
+      return -1;
+    }
+    d->source = s->in + 1;
+    d->source_limit = s->in + read;
+    return s->in[0];
+  };
+
+  int res;
+  do {
+    // The ring index wrapped to 0 exactly when the window filled
+    session.dest = session.window;
+    session.dest_limit = session.window + OTA_INFLATE_WINDOW_SIZE;
+    session.flushed = 0;
+    res = ota_inflate(&session);
+    // A stored block keeps emitting zeros after a failed read, hence eof
+    if (res < 0 || session.eof)
+      break;
+    session.error = this->inflate_flush_(session);
+  } while (res != OTA_INFLATE_DONE && session.error == ota::OTA_RESPONSE_OK);
+
+  // Transport and flash failures are logged where they happen
+  if (session.error != ota::OTA_RESPONSE_OK)
+    return session.error;
+  if (res != OTA_INFLATE_DONE || session.written != image_size || xfer.total != xfer.ota_size) {
+    ESP_LOGW(TAG, "Inflate err %d, %zu of %zu B from %zu of %zu", res, session.written, image_size, xfer.total,
+             xfer.ota_size);
+    return ota::OTA_RESPONSE_ERROR_UNKNOWN;
+  }
+  ESP_LOGD(TAG, "Inflated %zu bytes from %zu", session.written, xfer.total);
+  return ota::OTA_RESPONSE_OK;
+}
+#endif  // USE_OTA_DEFLATE
+
 void ESPHomeOTAComponent::cleanup_connection_() {
   this->client_->close();
   this->client_ = nullptr;
@@ -784,6 +931,9 @@ void ESPHomeOTAComponent::cleanup_connection_() {
 #endif
 #ifdef USE_OTA_ENCRYPTION
   this->noise_ = nullptr;
+#endif
+#ifdef USE_OTA_DEFLATE
+  this->inflate_ = nullptr;
 #endif
   // Intentionally no disable_loop() — letting loop() run one more iteration catches
   // any connection that queued on the listener mid-session (otherwise the wake flag,

esphome/components/esphome/ota/ota_esphome.h

@@ -7,6 +7,9 @@
 #ifdef USE_OTA_ENCRYPTION
 #include "esphome/components/noise/noise_handshake.h"
 #endif
+#ifdef USE_OTA_DEFLATE
+#include "ota_esphome_inflate.h"
+#endif
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 #include "esphome/core/preferences.h"
@@ -88,6 +91,9 @@ class ESPHomeOTAComponent final : public ota::OTAComponent {
   };
   // The api server's live context when the api has encryption, else our own
   const noise::NoiseContext &noise_context_() const;
+  // True once the feature ack offers noise and the client asked for it
+  bool noise_offered_() const;
+  void noise_reserve_session_();
   bool noise_start_session_(uint8_t server_feature_flags);
   bool handle_noise_handshake_();
   bool noise_try_read_frame_();
@@ -119,6 +125,38 @@ class ESPHomeOTAComponent final : public ota::OTAComponent {
     return this->readall_(buf, len);
   }
 
+  // Upload accounting shared by the data loop and the inflate read callback
+  struct DataTransfer {
+    size_t ota_size{0};  // bytes the client sends
+    size_t total{0};     // bytes received so far
+#if USE_OTA_VERSION == 2
+    size_t acknowledged{0};
+#endif
+    uint32_t last_data_ms{0};
+    uint32_t last_progress{0};
+  };
+  // Up to OTA_BUFFER_SIZE bytes into buf; returns bytes read, -1 on failure (logged)
+  inline ssize_t receive_data_(uint8_t *buf, DataTransfer &xfer);
+  // Raw lwIP cannot service the radio during a sector write, so the ack waits
+  // for the write there; a socket task lets the next block arrive meanwhile
+#ifdef USE_SOCKET_IMPL_LWIP_TCP
+  static constexpr bool ACK_AFTER_WRITE = true;
+#else
+  static constexpr bool ACK_AFTER_WRITE = false;
+#endif
+  void send_chunk_acks_(DataTransfer &xfer);
+  inline void ack_received_(DataTransfer &xfer) {
+    if (!ACK_AFTER_WRITE)
+      this->send_chunk_acks_(xfer);
+  }
+  inline void ack_written_(DataTransfer &xfer) {
+    if (ACK_AFTER_WRITE)
+      this->send_chunk_acks_(xfer);
+  }
+  inline bool read_size_(uint8_t *buf, size_t &size, const LogString *desc);
+  // Writes to the backend and logs a failure
+  inline ota::OTAResponseTypes write_flash_(uint8_t *data, size_t len);
+
   bool try_read_(size_t to_read, const LogString *desc);
   bool try_write_(size_t to_write, const LogString *desc);
 
@@ -171,6 +209,34 @@ class ESPHomeOTAComponent final : public ota::OTAComponent {
   static_assert(OTA_BUFFER_SIZE >= NOISE_CLIENT_MAX_PLAINTEXT + noise::MAC_SIZE,
                 "OTA_BUFFER_SIZE must fit a full encrypted data frame");
 #endif
+#ifdef USE_OTA_DEFLATE
+  // At least 1 << espota2.DEFLATE_WINDOW_BITS; also the inflate output buffer
+  static constexpr size_t OTA_INFLATE_WINDOW_SIZE = 4096;
+  // Heap-allocated only while a deflate upload is negotiated; the decoder
+  // state is the base so the read callback can recover the session
+  struct InflateSession : OtaInflateState {
+    // The session outlives the upload it serves, but these three are borrowed
+    // from inflate_data_'s caller and dangle once that call returns; only that
+    // call, and the flush and read callback it drives, may read them
+    ESPHomeOTAComponent *self;
+    DataTransfer *xfer;
+    uint8_t *in;  // caller's buffer for the compressed input
+    size_t image_size;
+    size_t written;               // inflated bytes in flash
+    size_t flushed;               // bytes of the current window already in flash
+    ota::OTAResponseTypes error;  // first failure inside the read callback
+    uint8_t window[OTA_INFLATE_WINDOW_SIZE];
+  };
+#ifndef CLANG_TIDY  // static analysis sets every define at once
+  static_assert(!ota::OTABackend::supports_compression(),
+                "USE_OTA_DEFLATE is for backends that cannot store a gzip image");
+#endif
+  // Writes the decoded bytes not yet in flash without moving dest
+  ota::OTAResponseTypes inflate_flush_(InflateSession &session);
+  ota::OTAResponseTypes inflate_data_(uint8_t *in, size_t image_size, DataTransfer &xfer);
+  std::unique_ptr<InflateSession> inflate_;
+#endif
+
   static constexpr uint8_t MAGIC_BYTES[5] = {0x6C, 0x26, 0xF7, 0x5C, 0x45};
   // Derived from the feature byte; storing it would pad the trailing bytes
   bool extended_proto_() const;

esphome/components/esphome/ota/ota_esphome_inflate.c

@@ -0,0 +1,498 @@
+/*
+ * uzlib  -  tiny deflate/inflate library (deflate, gzip, zlib)
+ *
+ * Copyright (c) 2003 by Joergen Ibsen / Jibz
+ * All Rights Reserved
+ * http://www.ibsensoftware.com/
+ *
+ * Copyright (c) 2014-2018 by Paul Sokolovsky
+ *
+ * This software is provided 'as-is', without any express
+ * or implied warranty.  In no event will the authors be
+ * held liable for any damages arising from the use of
+ * this software.
+ *
+ * Permission is granted to anyone to use this software
+ * for any purpose, including commercial applications,
+ * and to alter it and redistribute it freely, subject to
+ * the following restrictions:
+ *
+ * 1. The origin of this software must not be
+ *    misrepresented; you must not claim that you
+ *    wrote the original software. If you use this
+ *    software in a product, an acknowledgment in
+ *    the product documentation would be appreciated
+ *    but is not required.
+ *
+ * 2. Altered source versions must be plainly marked
+ *    as such, and must not be misrepresented as
+ *    being the original software.
+ *
+ * 3. This notice may not be removed or altered from
+ *    any source distribution.
+ */
+
+/*
+ * Altered for ESPHome: this is the raw deflate decoder from uzlib's
+ * tinflate.c (v2.9.5) with the gzip/zlib header parsers, checksums,
+ * runtime table builder and in-memory (non ring window) output path
+ * removed, and the public names prefixed with ota_inflate.
+ */
+
+#include "ota_esphome_inflate.h"
+
+#include <stddef.h>
+
+#define TINF_OK OTA_INFLATE_OK
+#define TINF_DONE OTA_INFLATE_DONE
+#define TINF_DATA_ERROR OTA_INFLATE_DATA_ERROR
+#define TINF_DICT_ERROR OTA_INFLATE_DICT_ERROR
+#define TINF_DATA struct OtaInflateState
+#define TINF_TREE struct OtaInflateTree
+#define TINF_ARRAY_SIZE(arr) (sizeof(arr) / sizeof(*(arr)))
+
+/* every output byte also goes into the ring window */
+#define TINF_PUT(d, c) \
+  { \
+    *d->dest++ = c; \
+    d->dict_ring[d->dict_idx++] = c; \
+    if (d->dict_idx == d->dict_size) \
+      d->dict_idx = 0; \
+  }
+
+/* --------------------------------------------------- *
+ * -- constant tables (upstream builds them at runtime) -- *
+ * --------------------------------------------------- */
+
+static const unsigned char LENGTH_BITS[30] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2,
+                                              2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5};
+static const unsigned short LENGTH_BASE[30] = {3,  4,  5,  6,  7,  8,  9,  10, 11,  13,  15,  17,  19,  23, 27,
+                                               31, 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258};
+
+static const unsigned char DIST_BITS[30] = {0, 0, 0, 0, 1, 1, 2, 2,  3,  3,  4,  4,  5,  5,  6,
+                                            6, 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 13, 13};
+static const unsigned short DIST_BASE[30] = {1,    2,    3,    4,    5,    7,    9,    13,    17,    25,
+                                             33,   49,   65,   97,   129,  193,  257,  385,   513,   769,
+                                             1025, 1537, 2049, 3073, 4097, 6145, 8193, 12289, 16385, 24577};
+
+/* special ordering of code length codes */
+static const unsigned char CLCIDX[] = {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+/* ----------------------- *
+ * -- utility functions -- *
+ * ----------------------- */
+
+/* given an array of code lengths, build a tree */
+static void tinf_build_tree(TINF_TREE *t, const unsigned char *lengths, unsigned int num) {
+  unsigned short offs[16];
+  unsigned int i, sum;
+
+  /* clear code length count table */
+  for (i = 0; i < 16; ++i)
+    t->table[i] = 0;
+
+  /* scan symbol lengths, and sum code length counts */
+  for (i = 0; i < num; ++i)
+    t->table[lengths[i]]++;
+
+  /* In the lengths array, 0 means unused code. So, t->table[0] now contains
+     number of unused codes. But table's purpose is to contain # of codes of
+     particular length, and there're 0 codes of length 0. */
+  t->table[0] = 0;
+
+  /* compute offset table for distribution sort */
+  for (sum = 0, i = 0; i < 16; ++i) {
+    offs[i] = sum;
+    sum += t->table[i];
+  }
+
+  /* create code->symbol translation table (symbols sorted by code) */
+  for (i = 0; i < num; ++i) {
+    if (lengths[i])
+      t->trans[offs[lengths[i]]++] = i;
+  }
+}
+
+/* ---------------------- *
+ * -- decode functions -- *
+ * ---------------------- */
+
+static unsigned char uzlib_get_byte(TINF_DATA *d) {
+  /* If end of source buffer is not reached, return next byte from source
+     buffer. */
+  if (d->source < d->source_limit) {
+    return *d->source++;
+  }
+
+  /* Otherwise if there's callback and we haven't seen EOF yet, try to
+     read next byte using it. (Note: the callback can also update ->source
+     and ->source_limit). */
+  if (!d->eof) {
+    int val = d->source_read_cb(d);
+    if (val >= 0) {
+      return (unsigned char) val;
+    }
+  }
+
+  /* Otherwise, we hit EOF (either from ->source_read_cb() or from exhaustion
+     of the buffer), and it will be "sticky", i.e. further calls to this
+     function will end up here too. */
+  d->eof = true;
+
+  return 0;
+}
+
+/* get one bit from source stream */
+static int tinf_getbit(TINF_DATA *d) {
+  unsigned int bit;
+
+  /* check if tag is empty */
+  if (!d->bitcount--) {
+    /* load next tag */
+    d->tag = uzlib_get_byte(d);
+    d->bitcount = 7;
+  }
+
+  /* shift bit out of tag */
+  bit = d->tag & 0x01;
+  d->tag >>= 1;
+
+  return bit;
+}
+
+/* read a num bit value from a stream and add base */
+static unsigned int tinf_read_bits(TINF_DATA *d, int num, int base) {
+  unsigned int val = 0;
+
+  /* read num bits */
+  if (num) {
+    unsigned int limit = 1 << (num);
+    unsigned int mask;
+
+    for (mask = 1; mask < limit; mask *= 2)
+      if (tinf_getbit(d))
+        val += mask;
+  }
+
+  return val + base;
+}
+
+/* given a data stream and a tree, decode a symbol */
+static int tinf_decode_symbol(TINF_DATA *d, TINF_TREE *t) {
+  int sum = 0, cur = 0, len = 0;
+
+  /* get more bits while code value is above sum */
+  do {
+    cur = 2 * cur + tinf_getbit(d);
+
+    if (++len == TINF_ARRAY_SIZE(t->table)) {
+      return TINF_DATA_ERROR;
+    }
+
+    sum += t->table[len];
+    cur -= t->table[len];
+
+  } while (cur >= 0);
+
+  sum += cur;
+  if (sum < 0 || sum >= t->size) {
+    return TINF_DATA_ERROR;
+  }
+
+  return t->trans[sum];
+}
+
+/* given a data stream, decode dynamic trees from it */
+static int tinf_decode_trees(TINF_DATA *d, TINF_TREE *lt, TINF_TREE *dt) {
+  /* code lengths for 288 literal/len symbols and 32 dist symbols */
+  unsigned char lengths[288 + 32];
+  unsigned int hlit, hdist, hclen, hlimit;
+  unsigned int i, num, length;
+
+  /* get 5 bits HLIT (257-286) */
+  hlit = tinf_read_bits(d, 5, 257);
+
+  /* get 5 bits HDIST (1-32) */
+  hdist = tinf_read_bits(d, 5, 1);
+
+  /* get 4 bits HCLEN (4-19) */
+  hclen = tinf_read_bits(d, 4, 4);
+
+  for (i = 0; i < 19; ++i)
+    lengths[i] = 0;
+
+  /* read code lengths for code length alphabet */
+  for (i = 0; i < hclen; ++i) {
+    /* get 3 bits code length (0-7) */
+    unsigned int clen = tinf_read_bits(d, 3, 0);
+
+    lengths[CLCIDX[i]] = clen;
+  }
+
+  /* build code length tree, temporarily use length tree */
+  tinf_build_tree(lt, lengths, 19);
+
+  /* decode code lengths for the dynamic trees */
+  hlimit = hlit + hdist;
+  for (num = 0; num < hlimit;) {
+    int sym = tinf_decode_symbol(d, lt);
+    unsigned char fill_value = 0;
+    int lbits, lbase = 3;
+
+    /* error decoding */
+    if (sym < 0)
+      return sym;
+
+    switch (sym) {
+      case 16:
+        /* copy previous code length 3-6 times (read 2 bits) */
+        if (num == 0)
+          return TINF_DATA_ERROR;
+        fill_value = lengths[num - 1];
+        lbits = 2;
+        break;
+      case 17:
+        /* repeat code length 0 for 3-10 times (read 3 bits) */
+        lbits = 3;
+        break;
+      case 18:
+        /* repeat code length 0 for 11-138 times (read 7 bits) */
+        lbits = 7;
+        lbase = 11;
+        break;
+      default:
+        /* values 0-15 represent the actual code lengths */
+        lengths[num++] = sym;
+        /* continue the for loop */
+        continue;
+    }
+
+    /* special code length 16-18 are handled here */
+    length = tinf_read_bits(d, lbits, lbase);
+    if (num + length > hlimit)
+      return TINF_DATA_ERROR;
+    for (; length; --length) {
+      lengths[num++] = fill_value;
+    }
+  }
+
+  /* Check that there's "end of block" symbol */
+  if (lengths[256] == 0) {
+    return TINF_DATA_ERROR;
+  }
+
+  /* build dynamic trees */
+  tinf_build_tree(lt, lengths, hlit);
+  tinf_build_tree(dt, lengths + hlit, hdist);
+
+  return TINF_OK;
+}
+
+/* build the fixed huffman trees (RFC 1951 3.2.6) through the generic tree
+   builder; altered from upstream, which unrolls them by hand */
+static void tinf_build_fixed_trees(TINF_TREE *lt, TINF_TREE *dt) {
+  unsigned char lengths[288];
+  unsigned int i;
+
+  for (i = 0; i < 144; ++i)
+    lengths[i] = 8;
+  for (; i < 256; ++i)
+    lengths[i] = 9;
+  for (; i < 280; ++i)
+    lengths[i] = 7;
+  for (; i < 288; ++i)
+    lengths[i] = 8;
+  tinf_build_tree(lt, lengths, 288);
+
+  for (i = 0; i < 32; ++i)
+    lengths[i] = 5;
+  tinf_build_tree(dt, lengths, 32);
+}
+
+/* ----------------------------- *
+ * -- block inflate functions -- *
+ * ----------------------------- */
+
+/* given a stream and two trees, inflate next chunk of output (a byte or more) */
+static int tinf_inflate_block_data(TINF_DATA *d, TINF_TREE *lt, TINF_TREE *dt) {
+  if (d->curlen == 0) {
+    unsigned int offs;
+    int dist;
+    int sym = tinf_decode_symbol(d, lt);
+
+    if (d->eof) {
+      return TINF_DATA_ERROR;
+    }
+
+    if (sym < 0) {
+      return sym;
+    }
+
+    /* literal byte */
+    if (sym < 256) {
+      TINF_PUT(d, sym);
+      return TINF_OK;
+    }
+
+    /* end of block */
+    if (sym == 256) {
+      return TINF_DONE;
+    }
+
+    /* substring from sliding dictionary */
+    sym -= 257;
+    if (sym >= 29) {
+      return TINF_DATA_ERROR;
+    }
+
+    /* possibly get more bits from length code */
+    d->curlen = tinf_read_bits(d, LENGTH_BITS[sym], LENGTH_BASE[sym]);
+
+    dist = tinf_decode_symbol(d, dt);
+    if (dist < 0 || dist >= 30) {
+      return TINF_DATA_ERROR;
+    }
+
+    /* possibly get more bits from distance code */
+    offs = tinf_read_bits(d, DIST_BITS[dist], DIST_BASE[dist]);
+
+    /* calculate and validate actual LZ offset to use */
+    if (offs > d->dict_size) {
+      return TINF_DICT_ERROR;
+    }
+    /* Note: we don't try to catch offset which points to not yet filled
+       part of the dictionary here. Doing so would require keeping another
+       variable to track "filled in" size of the dictionary. Appearance of
+       such an offset cannot lead to accessing memory outside of the
+       dictionary buffer, and clients which don't want to leak unrelated
+       information, should explicitly initialize dictionary buffer passed
+       to uzlib. */
+
+    d->lz_off = d->dict_idx - offs;
+    if (d->lz_off < 0) {
+      d->lz_off += d->dict_size;
+    }
+  }
+
+  /* copy next byte from dict substring */
+  TINF_PUT(d, d->dict_ring[d->lz_off]);
+  if ((unsigned) ++d->lz_off == d->dict_size) {
+    d->lz_off = 0;
+  }
+  d->curlen--;
+  return TINF_OK;
+}
+
+/* inflate next byte from uncompressed block of data */
+static int tinf_inflate_uncompressed_block(TINF_DATA *d) {
+  if (d->curlen == 0) {
+    unsigned int length, invlength;
+
+    /* get length */
+    length = uzlib_get_byte(d);
+    length += 256 * uzlib_get_byte(d);
+    /* get one's complement of length */
+    invlength = uzlib_get_byte(d);
+    invlength += 256 * uzlib_get_byte(d);
+    /* check length */
+    if (length != (~invlength & 0x0000ffff))
+      return TINF_DATA_ERROR;
+
+    /* increment length to properly return TINF_DONE below, without
+       producing data at the same time */
+    d->curlen = length + 1;
+
+    /* make sure we start next block on a byte boundary */
+    d->bitcount = 0;
+  }
+
+  if (--d->curlen == 0) {
+    return TINF_DONE;
+  }
+
+  unsigned char c = uzlib_get_byte(d);
+  TINF_PUT(d, c);
+  return TINF_OK;
+}
+
+/* ---------------------- *
+ * -- public functions -- *
+ * ---------------------- */
+
+/* initialize decompression structure */
+void ota_inflate_init(TINF_DATA *d, unsigned char *dict, unsigned int dict_len) {
+  d->source = NULL;
+  d->source_limit = NULL;
+  d->tag = 0;
+  d->eof = 0;
+  d->bitcount = 0;
+  d->lz_off = 0;
+  d->bfinal = 0;
+  d->btype = -1;
+  d->dict_size = dict_len;
+  d->dict_ring = dict;
+  d->dict_idx = 0;
+  d->curlen = 0;
+  d->ltree.trans = d->ltrans;
+  d->ltree.size = TINF_ARRAY_SIZE(d->ltrans);
+  d->dtree.trans = d->dtrans;
+  d->dtree.size = TINF_ARRAY_SIZE(d->dtrans);
+}
+
+/* inflate next output bytes from compressed stream */
+int ota_inflate(TINF_DATA *d) {
+  do {
+    int res;
+
+    /* start a new block */
+    if (d->btype == -1) {
+      int old_btype;
+    next_blk:
+      old_btype = d->btype;
+      /* read final block flag */
+      d->bfinal = tinf_getbit(d);
+      /* read block type (2 bits) */
+      d->btype = tinf_read_bits(d, 2, 0);
+
+      if (d->btype == 1 && old_btype != 1) {
+        /* build fixed huffman trees */
+        tinf_build_fixed_trees(&d->ltree, &d->dtree);
+      } else if (d->btype == 2) {
+        /* decode trees from stream */
+        res = tinf_decode_trees(d, &d->ltree, &d->dtree);
+        if (res != TINF_OK) {
+          return res;
+        }
+      }
+    }
+
+    /* process current block */
+    switch (d->btype) {
+      case 0:
+        /* decompress uncompressed block */
+        res = tinf_inflate_uncompressed_block(d);
+        break;
+      case 1:
+      case 2:
+        /* decompress block with fixed/dynamic huffman trees */
+        /* trees were decoded previously, so it's the same routine for both */
+        res = tinf_inflate_block_data(d, &d->ltree, &d->dtree);
+        break;
+      default:
+        return TINF_DATA_ERROR;
+    }
+
+    if (res == TINF_DONE && !d->bfinal) {
+      /* the block has ended (without producing more data), but we
+         can't return without data, so start procesing next block */
+      goto next_blk;
+    }
+
+    if (res != TINF_OK) {
+      return res;
+    }
+
+  } while (d->dest < d->dest_limit);
+
+  return TINF_OK;
+}

esphome/components/esphome/ota/ota_esphome_inflate.h

@@ -0,0 +1,66 @@
+#pragma once
+// Raw deflate decoder cut down from uzlib (https://github.com/pfalcon/uzlib,
+// zlib licence, see the .c file); output goes through a ring window.
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+enum OtaInflateResult {
+  OTA_INFLATE_OK = 0,   /* more data produced, call again */
+  OTA_INFLATE_DONE = 1, /* end of compressed stream reached */
+  OTA_INFLATE_DATA_ERROR = -3,
+  OTA_INFLATE_DICT_ERROR = -5,
+};
+
+struct OtaInflateTree {
+  uint16_t table[16]; /* table of code length counts */
+  uint16_t *trans;    /* code -> symbol translation table, size entries */
+  uint16_t size;
+};
+
+struct OtaInflateState {
+  /* Next byte in the input buffer and one past its end */
+  const unsigned char *source;
+  const unsigned char *source_limit;
+  /* Called when source is exhausted; returns the next byte or -1 at EOF.
+     It may refill source/source_limit for buffered operation. */
+  int (*source_read_cb)(struct OtaInflateState *d);
+
+  unsigned int tag;
+  unsigned int bitcount;
+
+  /* Output cursor and one past the end of the output buffer */
+  unsigned char *dest;
+  unsigned char *dest_limit;
+
+  bool eof;
+
+  int btype;
+  int bfinal;
+  unsigned int curlen;
+  int lz_off;
+  /* Ring window holding the last dict_size output bytes for back references */
+  unsigned char *dict_ring;
+  unsigned int dict_size;
+  unsigned int dict_idx;
+
+  struct OtaInflateTree ltree; /* dynamic length/symbol tree */
+  struct OtaInflateTree dtree; /* dynamic distance tree */
+  uint16_t ltrans[288];
+  uint16_t dtrans[32]; /* the distance alphabet has 30 symbols, so the tree is kept small */
+};
+
+/* dict must cover the encoder's window (its largest back reference) */
+void ota_inflate_init(struct OtaInflateState *d, unsigned char *dict, unsigned int dict_len);
+/* Fills dest up to dest_limit (OK) or to the end of the stream (DONE). dest may
+   alias dict only if dest_limit - dest == dict_len and dest is reset to dict
+   exactly when a call returns OK, so the ring index and dest stay in lockstep */
+int ota_inflate(struct OtaInflateState *d);
+
+#ifdef __cplusplus
+}
+#endif

esphome/components/esphome/ota/ota_esphome_noise.cpp

@@ -33,7 +33,13 @@ ESPHomeOTAComponent::NoiseSession::~NoiseSession() {
   }
 }
 
-/** Allocate the session and start the responder handshake.
+void ESPHomeOTAComponent::noise_reserve_session_() {
+  // Default-init: the frame buffer is written before it is read
+  // NOLINTNEXTLINE(clang-analyzer-cplusplus.NewDeleteLeaks)
+  this->noise_ = std::unique_ptr<NoiseSession>(new (std::nothrow) NoiseSession);
+}
+
+/** Start the responder handshake, on the session reserved at offer time.
  *
  * The prologue binds the whole plaintext preamble, so any tampering with the
  * negotiation (a stripped feature flag, a changed version) breaks the first
@@ -42,10 +48,7 @@ ESPHomeOTAComponent::NoiseSession::~NoiseSession() {
  */
 bool ESPHomeOTAComponent::noise_start_session_(uint8_t server_feature_flags) {
   // A provisioned key cleared between the offer and here is not guarded: the
-  // session runs on the zero key load_psk fills in and fails the client's MAC.
+  // session runs on the zero key load_psk fills in and fails the client's MAC
-  // Default-init: the frame buffer is written before it is read
-  // NOLINTNEXTLINE(clang-analyzer-cplusplus.NewDeleteLeaks)
-  this->noise_ = std::unique_ptr<NoiseSession>(new (std::nothrow) NoiseSession);
   static constexpr size_t PROLOGUE_ACK_LEN = 2;  // OTA_RESPONSE_OK + version
   static constexpr size_t PROLOGUE_CLIENT_FEATURES_LEN = 1;
   static constexpr size_t PROLOGUE_FEATURE_ACK_LEN = 2;  // OTA_RESPONSE_FEATURE_FLAGS + server flags

esphome/components/i2s_audio/speaker/i2s_audio_speaker.cpp

@@ -91,7 +91,14 @@ void I2SAudioSpeakerBase::loop() {
     this->speaker_task_handle_ = nullptr;
 
     this->stop_i2s_driver_();
-    xEventGroupClearBits(this->event_group_, SpeakerEventGroupBits::ALL_BITS);
+    // ALL_BITS includes COMMAND_START. Take the bits from the clear itself, not from the snapshot at
+    // the top of loop(): the audio source's task can raise a start at any point above, including
+    // during stop_i2s_driver_(), and nothing would ever re-issue it.
+    const EventBits_t bits_before_clear = xEventGroupClearBits(this->event_group_, SpeakerEventGroupBits::ALL_BITS);
+    if (bits_before_clear & SpeakerEventGroupBits::COMMAND_START) {
+      ESP_LOGD(TAG, "Start requested while stopping; keeping the request");
+      xEventGroupSetBits(this->event_group_, SpeakerEventGroupBits::COMMAND_START);
+    }
     this->status_clear_error();
 
     this->on_task_stopped();
@@ -111,21 +118,24 @@ void I2SAudioSpeakerBase::loop() {
         break;
       }
 
+      // Still starting up or winding down from a previous run
+      if ((this->tx_handle_ != nullptr) || (this->speaker_task_handle_ != nullptr)) {
+        break;
+      }
+
       if (this->start_i2s_driver(this->audio_stream_info_) != ESP_OK) {
         ESP_LOGE(TAG, "Driver failed to start; retrying in 1 second");
         this->status_momentary_error("driver-failure", 1000);
         break;
       }
 
-      if (this->speaker_task_handle_ == nullptr) {
+      xTaskCreate(I2SAudioSpeakerBase::speaker_task, "speaker_task", TASK_STACK_SIZE, (void *) this, TASK_PRIORITY,
-        xTaskCreate(I2SAudioSpeakerBase::speaker_task, "speaker_task", TASK_STACK_SIZE, (void *) this, TASK_PRIORITY,
+                  &this->speaker_task_handle_);
-                    &this->speaker_task_handle_);
 
-        if (this->speaker_task_handle_ == nullptr) {
+      if (this->speaker_task_handle_ == nullptr) {
-          ESP_LOGE(TAG, "Task failed to start, retrying in 1 second");
+        ESP_LOGE(TAG, "Task failed to start, retrying in 1 second");
-          this->status_momentary_error("task-failure", 1000);
+        this->status_momentary_error("task-failure", 1000);
-          this->stop_i2s_driver_();  // Stops the driver to return the lock; will be reloaded in next attempt
+        this->stop_i2s_driver_();  // Stops the driver to return the lock; will be reloaded in next attempt
-        }
       }
       break;
     case speaker::STATE_RUNNING:   // Intentional fallthrough
@@ -211,8 +221,8 @@ size_t I2SAudioSpeakerBase::play(const uint8_t *data, size_t length, TickType_t
 }
 
 bool I2SAudioSpeakerBase::has_buffered_data() const {
-  if (this->audio_ring_buffer_.use_count() > 0) {
+  std::shared_ptr<ring_buffer::RingBuffer> temp_ring_buffer = this->audio_ring_buffer_.lock();
-    std::shared_ptr<ring_buffer::RingBuffer> temp_ring_buffer = this->audio_ring_buffer_.lock();
+  if (temp_ring_buffer != nullptr) {
     return temp_ring_buffer->available() > 0;
   }
   return false;

esphome/components/logger/logger_esp32.cpp

@@ -5,6 +5,7 @@
 #include <esp_log.h>
 
 #include <driver/uart.h>
+#include <soc/soc_caps.h>
 
 #ifdef USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG
 #include <driver/usb_serial_jtag.h>
@@ -76,7 +77,11 @@ void init_uart(uart_port_t uart_num, uint32_t baud_rate, int tx_buffer_size) {
   uart_config.parity = UART_PARITY_DISABLE;
   uart_config.stop_bits = UART_STOP_BITS_1;
   uart_config.flow_ctrl = UART_HW_FLOWCTRL_DISABLE;
+#if SOC_UART_SUPPORT_XTAL_CLK
+  uart_config.source_clk = UART_SCLK_XTAL;
+#else
   uart_config.source_clk = UART_SCLK_DEFAULT;
+#endif
   uart_param_config(uart_num, &uart_config);
   // The logger only writes to UART, never reads, so use the minimum RX buffer.
   // ESP-IDF requires rx_buffer_size > UART_HW_FIFO_LEN (128 bytes).

esphome/components/lvgl/widgets/keyboard.py

@@ -15,6 +15,7 @@ from ..defines import (
 from ..types import LvCompound, LvType
 from . import Widget, WidgetType, get_widgets
 from .buttonmatrix import CONF_BUTTONMATRIX
+from .label import CONF_LABEL
 from .textarea import CONF_TEXTAREA, lv_textarea_t
 
 CONF_KEYBOARD = "keyboard"
@@ -49,7 +50,7 @@ class KeyboardType(WidgetType):
         )
 
     def get_uses(self):
-        return CONF_KEYBOARD, CONF_TEXTAREA, CONF_BUTTONMATRIX
+        return CONF_KEYBOARD, CONF_TEXTAREA, CONF_BUTTONMATRIX, CONF_LABEL
 
     async def to_code(self, w: Widget, config: dict):
         add_lv_use("KEY_LISTENER")

esphome/components/lvgl/widgets/qrcode.py

@@ -10,6 +10,7 @@ from ..types import lv_obj_t
 from . import Widget, WidgetType
 from .canvas import CONF_CANVAS
 from .img import CONF_IMAGE
+from .label import CONF_LABEL
 
 CONF_QRCODE = "qrcode"
 CONF_DARK_COLOR = "dark_color"
@@ -41,7 +42,7 @@ class QrCodeType(WidgetType):
         )
 
     def get_uses(self):
-        return CONF_CANVAS, CONF_IMAGE
+        return CONF_CANVAS, CONF_IMAGE, CONF_LABEL
 
     async def to_code(self, w: Widget, config):
         await w.set_property(

esphome/components/lvgl/widgets/tabview.py

@@ -28,6 +28,7 @@ from ..types import LV_EVENT, LvType, ObjUpdateAction, lv_obj_t, lv_obj_t_ptr
 from . import Widget, WidgetType, add_widgets, get_widgets, set_obj_properties
 from .button import button_spec
 from .buttonmatrix import CONF_BUTTONMATRIX, buttonmatrix_spec
+from .label import CONF_LABEL
 from .obj import obj_spec
 
 CONF_TABVIEW = "tabview"
@@ -74,7 +75,7 @@ class TabviewType(WidgetType):
         )
 
     def get_uses(self):
-        return CONF_BUTTONMATRIX, TYPE_FLEX, CONF_BUTTON
+        return CONF_BUTTONMATRIX, TYPE_FLEX, CONF_BUTTON, CONF_LABEL
 
     async def to_code(self, w: Widget, config: dict):
         await w.set_property(

esphome/components/micro_wake_word/micro_wake_word.cpp

@@ -129,7 +129,7 @@ void MicroWakeWord::setup() {
       return;
     }
     std::shared_ptr<ring_buffer::RingBuffer> temp_ring_buffer = this->ring_buffer_.lock();
-    if (this->ring_buffer_.use_count() > 1) {
+    if (temp_ring_buffer != nullptr) {
       // Producer-only write: never touches consumer state. If the buffer is full, ask the inference task
       // to drain it - reset() is a consumer operation and must run on the inference task's thread.
       // Disable partial writes so audio chunks are either fully accepted or rejected and handled below.
@@ -446,9 +446,9 @@ void MicroWakeWord::loop() {
     xEventGroupClearBits(this->event_group_, EventGroupBits::TASK_STOPPING);
   }
 
-  if ((event_group_bits & EventGroupBits::TASK_STOPPED)) {
+  // Retries on a subsequent loop if the task is still running on the other core
+  if ((event_group_bits & EventGroupBits::TASK_STOPPED) && this->inference_task_.deallocate()) {
     ESP_LOGD(TAG, "Inference task is finished, freeing task resources");
-    this->inference_task_.deallocate();
     xEventGroupClearBits(this->event_group_, ALL_BITS);
     xQueueReset(this->detection_queue_);
     this->set_state_(State::STOPPED);

esphome/components/microphone/microphone_source.h

@@ -48,7 +48,7 @@ class MicrophoneSource final {
   template<typename F> void add_data_callback(F &&data_callback) {
     this->mic_->add_data_callback([this, data_callback](const std::vector<uint8_t> &data) {
       if (this->enabled_ || this->passive_) {
-        if (this->processed_samples_.use_count() == 0) {
+        if (this->processed_samples_ == nullptr) {
           // Create vector if its unused
           this->processed_samples_ = std::make_shared<std::vector<uint8_t>>();
         }

esphome/components/mixer/speaker/mixer_speaker.cpp

@@ -218,7 +218,7 @@ size_t SourceSpeaker::play(const uint8_t *data, size_t length, TickType_t ticks_
   }
   size_t bytes_written = 0;
   std::shared_ptr<ring_buffer::RingBuffer> temp_ring_buffer = this->ring_buffer_.lock();
-  if (temp_ring_buffer.use_count() > 0) {
+  if (temp_ring_buffer != nullptr) {
     // Only write to the ring buffer if the reference is valid
     bytes_written = temp_ring_buffer->write_without_replacement(data, length, ticks_to_wait);
     if (bytes_written > 0) {
@@ -250,14 +250,14 @@ esp_err_t SourceSpeaker::start_() {
   // avoids unnecessary single-frame splices.
   const size_t ring_buffer_size =
       (this->audio_stream_info_.ms_to_bytes(this->buffer_duration_ms_) / bytes_per_frame) * bytes_per_frame;
-  if (this->audio_source_.use_count() == 0) {
+  if (this->audio_source_ == nullptr) {
     std::shared_ptr<ring_buffer::RingBuffer> temp_ring_buffer = this->ring_buffer_.lock();
-    if (!temp_ring_buffer) {
+    if (temp_ring_buffer == nullptr) {
       temp_ring_buffer = ring_buffer::RingBuffer::create(ring_buffer_size);
       this->ring_buffer_ = temp_ring_buffer;
     }
 
-    if (!temp_ring_buffer) {
+    if (temp_ring_buffer == nullptr) {
       return ESP_ERR_NO_MEM;
     }
 
@@ -278,7 +278,7 @@ void SourceSpeaker::stop() { this->send_command_(SOURCE_SPEAKER_COMMAND_STOP); }
 void SourceSpeaker::finish() { this->send_command_(SOURCE_SPEAKER_COMMAND_FINISH); }
 
 bool SourceSpeaker::has_buffered_data() const {
-  return ((this->audio_source_.use_count() > 0) && this->audio_source_->has_buffered_data());
+  return ((this->audio_source_ != nullptr) && this->audio_source_->has_buffered_data());
 }
 
 void SourceSpeaker::set_mute_state(bool mute_state) {
@@ -382,8 +382,8 @@ void MixerSpeaker::loop() {
     ESP_LOGV(TAG, "Stopping");
     xEventGroupClearBits(this->event_group_, MIXER_TASK_STATE_STOPPING);
   }
-  if (event_group_bits & MIXER_TASK_STATE_STOPPED) {
+  // Retries on a subsequent loop if the task is still running on the other core
-    this->task_.deallocate();
+  if ((event_group_bits & MIXER_TASK_STATE_STOPPED) && this->task_.deallocate()) {
     ESP_LOGD(TAG, "Stopped");
     xEventGroupClearBits(this->event_group_, MIXER_TASK_ALL_BITS);
     this->all_stopped_since_ms_ = 0;
@@ -496,7 +496,7 @@ void MixerSpeaker::audio_mixer_task(void *params) {
         if (speaker->is_running() && !speaker->get_pause_state()) {
           // Speaker is running and not paused, so it possibly can provide audio data
           std::shared_ptr<audio::RingBufferAudioSource> audio_source = speaker->get_audio_source().lock();
-          if (audio_source.use_count() == 0) {
+          if (audio_source == nullptr) {
             // No audio source allocated, so skip processing this speaker
             continue;
           }

esphome/components/mqtt/mqtt_light.cpp

@@ -67,6 +67,9 @@ void MQTTJSONLightComponent::send_discovery(JsonObject root, mqtt::SendDiscovery
   if (traits.supports_color_mode(ColorMode::RGB_COLD_WARM_WHITE))
     color_modes.add(ESPHOME_F("rgbww"));
 
+  if (traits.supports_color_capability(ColorCapability::BRIGHTNESS))
+    root[ESPHOME_F("brightness")] = true;
+
   if (traits.supports_color_mode(ColorMode::COLOR_TEMPERATURE) ||
       traits.supports_color_mode(ColorMode::COLD_WARM_WHITE)) {
     root[MQTT_MIN_MIREDS] = traits.get_min_mireds();

esphome/components/nextion/display.py

@@ -14,12 +14,7 @@ from esphome.const import (
 )
 from esphome.core import CORE, TimePeriod
 
-from . import (  # noqa: F401  pylint: disable=unused-import
+from . import FILTER_SOURCE_FILES, Nextion, nextion_ns, nextion_ref  # noqa: F401  pylint: disable=unused-import
-    FILTER_SOURCE_FILES,
-    Nextion,
-    nextion_ns,
-    nextion_ref,
-)
 from .base_component import (
     CONF_AUTO_WAKE_ON_TOUCH,
     CONF_COMMAND_SPACING,

esphome/components/noise/__init__.py

@@ -88,12 +88,12 @@ def encryption_schema(config: ConfigType | None) -> ConfigType:
 
 async def to_code(config: ConfigType) -> None:
     cg.add_define("USE_NOISE")
-    cg.add_library("esphome/noise-c", "0.1.24")
+    cg.add_library("esphome/noise-c", "0.1.26")
     # noise-c depends on libsodium, but declaring it here too lets the
     # library manager see the full set up front instead of discovering
     # libsodium only after noise-c has downloaded, so the two can download
     # in parallel. The version must match noise-c's library.json.
-    cg.add_library("esphome/libsodium", "1.10021.6")
+    cg.add_library("esphome/libsodium", "1.10021.8")
     # Enable optimized memzero/memcmp in libsodium instead of volatile byte loops
     cg.add_build_flag("-DHAVE_WEAK_SYMBOLS=1")
     cg.add_build_flag("-DHAVE_INLINE_ASM=1")

esphome/components/ota/ota_backend.h

@@ -7,6 +7,7 @@
 #include <concepts>
 #include <cstddef>
 #include <cstdint>
+#include <type_traits>
 
 #ifdef USE_OTA_STATE_LISTENER
 #include <vector>
@@ -102,6 +103,8 @@ enum OTAType : uint8_t {
 // - set_update_md5: expected digest of the incoming image, hex string.
 // - write: consume the next chunk; end: finalize and mark bootable.
 // - abort: safe to call in any state, including after end().
+// - supports_compression: constexpr, whether a gzip image is stored as is and
+//   inflated at reboot.
 template<typename T>
 concept OTABackendContract = requires(T backend, size_t image_size, uint8_t *data, size_t len, const char *md5) {
   { backend.begin(image_size, OTA_TYPE_UPDATE_APP) } -> std::same_as<OTAResponseTypes>;
@@ -110,7 +113,9 @@ concept OTABackendContract = requires(T backend, size_t image_size, uint8_t *dat
   { backend.write(data, len) } -> std::same_as<OTAResponseTypes>;
   { backend.end() } -> std::same_as<OTAResponseTypes>;
   backend.abort();
-  { backend.supports_compression() } -> std::same_as<bool>;
+  { T::supports_compression() } -> std::same_as<bool>;
+  // The value must be a constant expression
+  typename std::bool_constant<T::supports_compression()>;
 };
 
 /** Listener interface for OTA state changes.

esphome/components/ota/ota_backend_arduino_libretiny.h

@@ -13,7 +13,7 @@ class ArduinoLibreTinyOTABackend final {
   OTAResponseTypes write(uint8_t *data, size_t len);
   OTAResponseTypes end();
   void abort();
-  bool supports_compression() { return false; }
+  static constexpr bool supports_compression() { return false; }
 
  private:
   bool md5_set_{false};

esphome/components/ota/ota_backend_arduino_rp2.h

@@ -15,7 +15,10 @@ class ArduinoRP2OTABackend final {
   OTAResponseTypes write(uint8_t *data, size_t len);
   OTAResponseTypes end();
   void abort();
-  bool supports_compression() { return false; }
+  // The core's OTA stub inflates a staged gzip image at reboot, on every chip
+  // from 4.0.3 (ESPHome pins 6.0.0). begin() only sees the gzip size; the
+  // inflated size is known when the stub reads the trailer.
+  static constexpr bool supports_compression() { return USE_ARDUINO_VERSION_CODE >= VERSION_CODE(4, 0, 3); }
 
  private:
   bool md5_set_{false};

esphome/components/ota/ota_backend_esp8266.h

@@ -20,7 +20,7 @@ class ESP8266OTABackend final {
   OTAResponseTypes end();
   void abort();
   // Compression supported in all ESP8266 Arduino versions ESPHome supports (>= 2.7.0)
-  bool supports_compression() { return true; }
+  static constexpr bool supports_compression() { return true; }
 
  protected:
   /// Erase flash sector if current address is at sector boundary

esphome/components/ota/ota_backend_esp_idf.h

@@ -33,7 +33,7 @@ class IDFOTABackend final {
   OTAResponseTypes write(uint8_t *data, size_t len);
   OTAResponseTypes end();
   void abort();
-  bool supports_compression() { return false; }
+  static constexpr bool supports_compression() { return false; }
 
  protected:
 #ifdef USE_OTA_PARTITIONS

esphome/components/ota/ota_backend_factory.h

@@ -25,7 +25,7 @@ struct StubOTABackend {
   OTAResponseTypes write(uint8_t *data, size_t len) { return OTA_RESPONSE_ERROR_UNKNOWN; }
   OTAResponseTypes end() { return OTA_RESPONSE_ERROR_UNKNOWN; }
   void abort() {}
-  bool supports_compression() { return false; }
+  static constexpr bool supports_compression() { return false; }
 };
 std::unique_ptr<StubOTABackend> make_ota_backend();
 }  // namespace esphome::ota
@@ -33,6 +33,7 @@ std::unique_ptr<StubOTABackend> make_ota_backend();
 
 namespace esphome::ota {
 using OTABackendPtr = decltype(make_ota_backend());
-static_assert(OTABackendContract<OTABackendPtr::element_type>,
+using OTABackend = OTABackendPtr::element_type;
+static_assert(OTABackendContract<OTABackend>,
               "The platform's OTA backend is missing part of the backend surface (ota_backend.h)");
 }  // namespace esphome::ota

esphome/components/ota/ota_backend_host.h

@@ -19,7 +19,7 @@ class HostOTABackend final {
   OTAResponseTypes write(uint8_t *data, size_t len);
   OTAResponseTypes end();
   void abort();
-  bool supports_compression() { return false; }
+  static constexpr bool supports_compression() { return false; }
 
  protected:
   md5::MD5Digest md5_{};

esphome/components/resampler/speaker/resampler_speaker.cpp

@@ -153,8 +153,8 @@ void ResamplerSpeaker::loop() {
     ESP_LOGV(TAG, "Stopping");
     xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::STATE_STOPPING);
   }
-  if (event_group_bits & ResamplingEventGroupBits::STATE_STOPPED) {
+  // Retries on a subsequent loop if the task is still running on the other core
-    this->task_.deallocate();
+  if ((event_group_bits & ResamplingEventGroupBits::STATE_STOPPED) && this->task_.deallocate()) {
     ESP_LOGD(TAG, "Stopped");
     xEventGroupClearBits(this->event_group_, ResamplingEventGroupBits::ALL_BITS);
   }
@@ -235,7 +235,7 @@ size_t ResamplerSpeaker::play(const uint8_t *data, size_t length, TickType_t tic
     bytes_written = this->output_speaker_->play(data, length, ticks_to_wait);
   } else {
     std::shared_ptr<ring_buffer::RingBuffer> temp_ring_buffer = this->ring_buffer_.lock();
-    if (temp_ring_buffer) {
+    if (temp_ring_buffer != nullptr) {
       // Only write to the ring buffer if the reference is valid
       bytes_written = temp_ring_buffer->write_without_replacement(data, length, ticks_to_wait);
     } else {
@@ -299,7 +299,7 @@ bool ResamplerSpeaker::has_buffered_data() const {
   bool has_ring_buffer_data = false;
   if (this->requires_resampling_()) {
     std::shared_ptr<ring_buffer::RingBuffer> temp_ring_buffer = this->ring_buffer_.lock();
-    if (temp_ring_buffer) {
+    if (temp_ring_buffer != nullptr) {
       has_ring_buffer_data = (temp_ring_buffer->available() > 0);
     }
   }
@@ -342,7 +342,7 @@ void ResamplerSpeaker::resample_task(void *params) {
       std::shared_ptr<ring_buffer::RingBuffer> temp_ring_buffer = ring_buffer::RingBuffer::create(
           this_resampler->audio_stream_info_.ms_to_bytes(this_resampler->buffer_duration_ms_));
 
-      if (!temp_ring_buffer) {
+      if (temp_ring_buffer == nullptr) {
         err = ESP_ERR_NO_MEM;
       } else {
         this_resampler->ring_buffer_ = temp_ring_buffer;

esphome/components/rf_bridge/rf_bridge.cpp

@@ -18,6 +18,16 @@ void RFBridgeComponent::ack_() {
 }
 
 bool RFBridgeComponent::parse_bridge_byte_(uint8_t byte) {
+  if (this->bucket_frame_candidate_ && byte == RF_CODE_START) {
+    // A queued next frame proves the trailing 0x55 really was the bucket
+    // frame's terminator: Portisch builds pulse entries from alternating
+    // signal edges, so the two level bits inside one pulse byte are always
+    // opposite — 0xAA (two high-level nibbles) cannot occur in pulse data.
+    // Finalize before this byte starts the new frame, so back-to-back
+    // deliveries are split even when loop() never observed a quiet gap
+    // between them.
+    this->finish_bucket_frame_();
+  }
   size_t at = this->rx_buffer_.size();
   this->rx_buffer_.push_back(byte);
   const uint8_t *raw = &this->rx_buffer_[0];
@@ -84,26 +94,21 @@ bool RFBridgeComponent::parse_bridge_byte_(uint8_t byte) {
       break;
     }
     case RF_CODE_RFIN_BUCKET: {
-      if (byte != RF_CODE_STOP) {
+      if (at == 2) {
-        return true;
+        // The count byte: Portisch sends at most 7 buckets + sync, so 0 or
+        // >8 cannot be a genuine capture — reject before it can occupy the
+        // buffer for a full frame timeout.
+        return byte != 0 && byte <= B1_MAX_BUCKET_COUNT;
       }
-
+      // 0x55 is legal DATA inside a B1 frame: bucket durations are sent
-      uint8_t buckets = raw[2] << 1;
+      // with only their HIGH byte masked to 7 bits, so a duration such as
-      std::string str;
+      // 0x0155 puts a raw 0x55 low byte inside the table — the first 0x55
-      char next_byte[3];  // 2 hex chars + null
+      // must therefore not end the capture. The header declares the table
-
+      // length (raw[2] pairs), so a 0x55 there is always data; one at or
-      for (uint32_t i = 0; i <= at; i++) {
+      // past the first pulse index is a terminator CANDIDATE, confirmed
-        buf_append_printf(next_byte, sizeof(next_byte), 0, "%02X", raw[i]);
+      // once the UART goes quiet (finish_bucket_frame_ in loop()).
-        str += next_byte;
+      this->bucket_frame_candidate_ = byte == RF_CODE_STOP && at >= 3 + static_cast<size_t>(raw[2]) * 2;
-        if ((i > 3) && buckets) {
+      return true;
-          buckets--;
-        }
-        if ((i < 3) || (buckets % 2) || (i == at - 1)) {
-          str += " ";
-        }
-      }
-      ESP_LOGI(TAG, "Received RFBridge Bucket: %s", str.c_str());
-      break;
     }
     default:
       ESP_LOGW(TAG, "Unknown action: 0x%02X", action);
@@ -119,6 +124,47 @@ bool RFBridgeComponent::parse_bridge_byte_(uint8_t byte) {
   return false;
 }
 
+void RFBridgeComponent::finish_bucket_frame_() {
+  if (this->rx_buffer_.size() < 4) {
+    // The candidate flag requires a header + non-empty bucket table, so
+    // this cannot happen while flag and buffer stay consistent; guard the
+    // raw[2] / size-1 reads against any future divergence anyway.
+    this->rx_buffer_.clear();
+    this->bucket_frame_candidate_ = false;
+    return;
+  }
+  const uint8_t *raw = this->rx_buffer_.data();
+  const size_t at = this->rx_buffer_.size() - 1;
+
+  uint8_t buckets = raw[2] << 1;
+  std::string str;
+  char next_byte[3];  // 2 hex chars + null
+
+  for (uint32_t i = 0; i <= at; i++) {
+    buf_append_printf(next_byte, sizeof(next_byte), 0, "%02X", raw[i]);
+    str += next_byte;
+    if ((i > 3) && buckets) {
+      buckets--;
+    }
+    if ((i < 3) || (buckets % 2) || (i == at - 1)) {
+      str += " ";
+    }
+  }
+  ESP_LOGI(TAG, "Received RFBridge Bucket: %s", str.c_str());
+
+  // Deliberately NOT ACKed: Portisch's B1 command handler leaves its
+  // last_sniffing_command at the previous mode (RF_CODE_RFIN), and its
+  // host-ACK handler re-arms sniffing from that stale value — so ACKing a
+  // bucket delivery silently reverts the radio to standard sniffing and
+  // ends bucket capture. Its delivery path is fire-and-forget and never
+  // waits for a host ACK. Stock Itead firmware never sends B1 frames, so
+  // suppressing this ACK cannot change stock-firmware behavior.
+  // https://github.com/esphome/esphome/issues/17682
+
+  this->rx_buffer_.clear();
+  this->bucket_frame_candidate_ = false;
+}
+
 void RFBridgeComponent::write_byte_str_(const std::string &codes) {
   uint8_t code;
   int size = codes.length();
@@ -130,12 +176,31 @@ void RFBridgeComponent::write_byte_str_(const std::string &codes) {
 
 void RFBridgeComponent::loop() {
   const uint32_t now = App.get_loop_component_start_time();
-  if (now - this->last_bridge_byte_ > 50) {
+  size_t avail = this->available();
+  if (avail == 0 && this->bucket_frame_candidate_ && now - this->last_bridge_byte_ > BUCKET_CANDIDATE_QUIET_MS) {
+    // The trailing 0x55 was followed by UART quiet, so it really was the
+    // frame terminator and not an interior data byte.
+    this->finish_bucket_frame_();
+    this->last_bridge_byte_ = now;
+  }
+  const bool receiving_bucket = this->rx_buffer_.size() >= 2 && this->rx_buffer_[1] == RF_CODE_RFIN_BUCKET;
+  if (receiving_bucket) {
+    // Never declare an in-progress bucket frame dead while its continuation
+    // bytes are already queued: a stalled loop() otherwise discards a live
+    // frame that the UART buffer proves is still arriving.
+    if (avail == 0 && now - this->last_bridge_byte_ > BUCKET_FRAME_TIMEOUT_MS) {
+      ESP_LOGD(TAG, "Discarding incomplete RFBridge Bucket frame (%u bytes)",
+               static_cast<unsigned>(this->rx_buffer_.size()));
+      this->rx_buffer_.clear();
+      this->bucket_frame_candidate_ = false;
+      this->last_bridge_byte_ = now;
+    }
+  } else if (now - this->last_bridge_byte_ > 50) {
     this->rx_buffer_.clear();
+    this->bucket_frame_candidate_ = false;
     this->last_bridge_byte_ = now;
   }
 
-  size_t avail = this->available();
   while (avail > 0) {
     uint8_t buf[64];
     size_t to_read = std::min(avail, sizeof(buf));
@@ -146,12 +211,14 @@ void RFBridgeComponent::loop() {
     for (size_t i = 0; i < to_read; i++) {
       if (this->rx_buffer_.size() > MAX_RX_BUFFER_SIZE) {
         this->rx_buffer_.clear();
+        this->bucket_frame_candidate_ = false;
       }
       if (this->parse_bridge_byte_(buf[i])) {
         ESP_LOGVV(TAG, "Parsed: 0x%02X", buf[i]);
         this->last_bridge_byte_ = now;
       } else {
         this->rx_buffer_.clear();
+        this->bucket_frame_candidate_ = false;
       }
     }
   }

esphome/components/rf_bridge/rf_bridge.h

@@ -30,6 +30,17 @@ static const uint8_t RF_CODE_BEEP = 0xC0;
 static const uint8_t RF_CODE_STOP = 0x55;
 static const uint8_t RF_DEBOUNCE = 200;
 static const size_t MAX_RX_BUFFER_SIZE = 512;
+// ~10 byte times at 19200 baud: long enough to prove the UART went quiet
+// after a possible bucket-frame terminator, short enough to finish well
+// before the next radio capture can be delivered.
+static const uint32_t BUCKET_CANDIDATE_QUIET_MS = 5;
+// Portisch drains a B1 frame's header, bucket table, and pulse data as
+// separate UART writes, so an in-progress bucket frame tolerates a longer
+// inter-region gap than the generic 50 ms inter-byte timeout.
+static const uint32_t BUCKET_FRAME_TIMEOUT_MS = 250;
+// Portisch's uart_put_RF_buckets sends at most 7 buckets plus the sync
+// bucket, so a B1 count byte above 8 (or 0) is malformed for any protocol.
+static const uint8_t B1_MAX_BUCKET_COUNT = 8;
 
 struct RFBridgeData {
   uint16_t sync;
@@ -67,10 +78,12 @@ class RFBridgeComponent final : public uart::UARTDevice, public Component {
   void ack_();
   void decode_();
   bool parse_bridge_byte_(uint8_t byte);
+  void finish_bucket_frame_();
   void write_byte_str_(const std::string &codes);
 
   std::vector<uint8_t> rx_buffer_;
   uint32_t last_bridge_byte_{0};
+  bool bucket_frame_candidate_{false};
 
   CallbackManager<void(RFBridgeData)> data_callback_;
   CallbackManager<void(RFBridgeAdvancedData)> advanced_data_callback_;

esphome/components/speaker/media_player/audio_pipeline.cpp

@@ -202,8 +202,15 @@ AudioPipelineState AudioPipeline::process_state() {
     if (!this->is_playing_) {
       // The tasks have been stopped for two ``process_state`` calls in a row, so delete the tasks
       if (this->read_task_.is_created() || this->decode_task_.is_created()) {
-        this->read_task_.deallocate();
+        // Both are attempted every time; a task that is still running on the other core is freed by a
-        this->decode_task_.deallocate();
+        // subsequent call, and freeing an already freed task succeeds without doing anything
+        bool read_task_freed = this->read_task_.deallocate();
+        bool decode_task_freed = this->decode_task_.deallocate();
+        if (!read_task_freed || !decode_task_freed) {
+          // A task is still running on the other core, so keep the pipeline in its current state and try
+          // again on the next call
+          return AudioPipelineState::PLAYING;
+        }
         if (this->hard_stop_) {
           // Stop command was sent, so immediately end the playback
           this->speaker_->stop();
@@ -315,17 +322,17 @@ void AudioPipeline::read_task(void *params) {
       if (err == ESP_OK) {
         size_t file_ring_buffer_size = this_pipeline->buffer_size_;
 
-        std::shared_ptr<ring_buffer::RingBuffer> temp_ring_buffer;
+        std::shared_ptr<ring_buffer::RingBuffer> temp_ring_buffer = this_pipeline->raw_file_ring_buffer_.lock();
 
-        if (!this_pipeline->raw_file_ring_buffer_.use_count()) {
+        if (temp_ring_buffer == nullptr) {
           temp_ring_buffer = ring_buffer::RingBuffer::create(file_ring_buffer_size);
           this_pipeline->raw_file_ring_buffer_ = temp_ring_buffer;
         }
 
-        if (!this_pipeline->raw_file_ring_buffer_.use_count()) {
+        if (temp_ring_buffer == nullptr) {
           err = ESP_ERR_NO_MEM;
         } else {
-          reader->add_sink(this_pipeline->raw_file_ring_buffer_);
+          err = reader->add_sink(temp_ring_buffer);
         }
       }
 
@@ -396,7 +403,9 @@ void AudioPipeline::decode_task(void *params) {
           make_unique<audio::AudioDecoder>(this_pipeline->transfer_buffer_size_, this_pipeline->transfer_buffer_size_);
 
       esp_err_t err = decoder->start(this_pipeline->current_audio_file_type_);
-      decoder->add_source(this_pipeline->raw_file_ring_buffer_);
+      if (err == ESP_OK) {
+        err = decoder->add_source(this_pipeline->raw_file_ring_buffer_);
+      }
 
       if (err != ESP_OK) {
         // Send specific error message

esphome/components/tuya/tuya.cpp

@@ -1,10 +1,13 @@
 #include "tuya.h"
-#include "esphome/components/network/util.h"
 #include "esphome/core/gpio.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 #include "esphome/core/util.h"
 
+#ifdef USE_NETWORK
+#include "esphome/components/network/util.h"
+#endif
+
 #ifdef USE_WIFI
 #include "esphome/components/wifi/wifi_component.h"
 #endif
@@ -22,6 +25,14 @@ static const int MAX_RETRIES = 5;
 // Max bytes to log for datapoint values (larger values are truncated)
 static constexpr size_t MAX_DATAPOINT_LOG_BYTES = 16;
 
+static bool network_is_connected() {
+#ifdef USE_NETWORK
+  return network::is_connected();
+#else
+  return false;
+#endif
+}
+
 void Tuya::setup() {
   this->set_interval("heartbeat", 15000, [this] { this->send_empty_command_(TuyaCommandType::HEARTBEAT); });
   if (this->status_pin_ != nullptr) {
@@ -554,14 +565,14 @@ void Tuya::send_empty_command_(TuyaCommandType command) {
 }
 
 void Tuya::set_status_pin_() {
-  bool is_network_ready = network::is_connected() && remote_is_connected();
+  bool is_network_ready = network_is_connected() && remote_is_connected();
   this->status_pin_->digital_write(is_network_ready);
 }
 
 uint8_t Tuya::get_wifi_status_code_() {
   uint8_t status = 0x02;
 
-  if (network::is_connected()) {
+  if (network_is_connected()) {
     status = 0x03;
 
     // Protocol version 3 also supports specifying when connected to "the cloud"

esphome/components/udp/__init__.py

@@ -1,5 +1,4 @@
-from collections.abc import Callable
+from typing import Any
-from typing import Any, NoReturn
 
 from esphome import automation
 from esphome.automation import Trigger
@@ -48,17 +47,10 @@ UDP_SCHEMA = cv.Schema(
 )
 
 
-def is_relocated(option: str) -> Callable[[Any], NoReturn]:
-    def validator(value: Any) -> NoReturn:
-        raise cv.Invalid(
-            f"The '{option}' option should now be configured in the 'packet_transport' component"
-        )
-
-    return validator
-
-
 RELOCATED = {
-    cv.Optional(x): is_relocated(x)
+    cv.Optional(x): cv.invalid(
+        f"The '{x}' option should now be configured in the 'packet_transport' component"
+    )
     for x in (
         CONF_PROVIDERS,
         CONF_ENCRYPTION,

esphome/core/defines.h

@@ -244,6 +244,7 @@
 #define USE_RUNTIME_IMAGE_QOI
 #define USE_RUNTIME_STATS
 #define USE_OTA
+#define USE_OTA_DEFLATE
 #define USE_OTA_ENCRYPTION
 #define USE_OTA_ENCRYPTION_FROM_API
 #define USE_OTA_ENCRYPTION_PROVISIONED

esphome/core/static_task.cpp

@@ -40,16 +40,31 @@ bool StaticTask::create(TaskFunction_t fn, const char *name, uint32_t stack_size
   return true;
 }
 
-void StaticTask::destroy() {
+bool StaticTask::destroy() {
-  if (this->handle_ != nullptr) {
+  if (this->handle_ == nullptr) {
-    TaskHandle_t handle = this->handle_;
+    return true;
-    this->handle_ = nullptr;
-    vTaskDelete(handle);
   }
+
+  // Suspending takes the task off the ready and event lists, so nothing can schedule it again. It only asks
+  // the other core to yield though, so the task may still be running on it for a moment.
+  vTaskSuspend(this->handle_);
+  if (eTaskGetState(this->handle_) != eSuspended) {
+    // The task is still running on the other core and using its stack. Deleting it now would only put it on
+    // the termination list and return, so the caller has to try again once it has been swapped out.
+    return false;
+  }
+
+  // The task cannot run again, so the delete completes right away instead of being left to the idle task.
+  TaskHandle_t handle = this->handle_;
+  this->handle_ = nullptr;
+  vTaskDelete(handle);
+  return true;
 }
 
-void StaticTask::deallocate() {
+bool StaticTask::deallocate() {
-  this->destroy();
+  if (!this->destroy()) {
+    return false;
+  }
   if (this->stack_buffer_ != nullptr) {
     RAMAllocator<StackType_t> allocator(this->use_psram_ ? RAMAllocator<StackType_t>::ALLOC_EXTERNAL
                                                          : RAMAllocator<StackType_t>::ALLOC_INTERNAL);
@@ -57,6 +72,7 @@ void StaticTask::deallocate() {
     this->stack_buffer_ = nullptr;
     this->stack_size_ = 0;
   }
+  return true;
 }
 
 }  // namespace esphome

esphome/core/static_task.h

@@ -11,6 +11,7 @@ namespace esphome {
 
 /** Helper for FreeRTOS static task management.
  * Bundles TaskHandle_t, StaticTask_t, and the stack buffer into one object with create/destroy methods.
+ * Call destroy() and deallocate() from another task: a task cannot free the stack it is still running on.
  */
 class StaticTask {
  public:
@@ -23,7 +24,7 @@ class StaticTask {
   /// @brief Allocate stack and create task.
   /// @param fn         Task function
   /// @param name       Task name (for debug)
-  /// @param stack_size Stack size in StackType_t words
+  /// @param stack_size Stack size in bytes (StackType_t is a byte on ESP-IDF)
   /// @param param      Parameter passed to task function
   /// @param priority   FreeRTOS task priority
   /// @param use_psram  If true, allocate stack in PSRAM; otherwise internal RAM
@@ -31,11 +32,17 @@ class StaticTask {
   bool create(TaskFunction_t fn, const char *name, uint32_t stack_size, void *param, UBaseType_t priority,
               bool use_psram);
 
-  /// @brief Delete the task but keep the stack buffer allocated for reuse by a subsequent create() call.
+  /// @brief Delete the task, keeping the stack buffer allocated for reuse by a subsequent create() call.
-  void destroy();
+  /// The task must have finished its work and parked itself, either suspended or blocked indefinitely: it is
+  /// suspended here so that it cannot be scheduled again, and it is given no chance to clean up.
+  /// @return true if the task was deleted; false if it is still running on another core, in which case the
+  /// caller should try again later.
+  bool destroy();
 
-  /// @brief Delete the task (if running) and free the stack buffer.
+  /// @brief Delete the task (if created) and free the stack buffer.
-  void deallocate();
+  /// @return true if the stack buffer was freed; false if the task is still running on another core, in
+  /// which case the caller should try again later.
+  bool deallocate();
 
  protected:
   TaskHandle_t handle_{nullptr};

esphome/core/string_ref.h

@@ -22,10 +22,6 @@ namespace esphome {
  * pointer.  When it is default constructed, it has empty string.  You can freely copy or move around this struct, but
  * never free its pointer.  str() function can be used to export the content as std::string. StringRef is adopted from
  * <https://github.com/nghttp2/nghttp2/blob/29cbf8b83ff78faf405d1086b16adc09a8772eca/src/template.h#L376>
- *
- * A StringRef may carry a null pointer while its length is zero (the generated api messages start their encode only
- * string fields that way). Every member treats that as the empty string; only c_str() hands the null pointer on, so
- * callers that print or copy through c_str() must check empty() first.
  */
 class StringRef {
  public:
@@ -82,7 +78,7 @@ class StringRef {
 
   /// True if the view begins with the given prefix (std::string::starts_with-like)
   bool starts_with(const StringRef &prefix) const {
-    return len_ >= prefix.len_ && (prefix.len_ == 0 || std::memcmp(base_, prefix.base_, prefix.len_) == 0);
+    return len_ >= prefix.len_ && std::memcmp(base_, prefix.base_, prefix.len_) == 0;
   }
   bool starts_with(const char *prefix) const { return this->starts_with(StringRef(prefix)); }
   bool starts_with(const std::string &prefix) const { return this->starts_with(StringRef(prefix)); }
@@ -96,15 +92,14 @@ class StringRef {
     return actual;
   }
 
-  std::string str() const { return std::string(base_, len_); }  // fine for {nullptr, 0}: nothing is read
+  std::string str() const { return std::string(base_, len_); }
   const uint8_t *byte() const { return reinterpret_cast<const uint8_t *>(base_); }
 
   operator std::string() const { return str(); }
 
   /// Compare (compatible with std::string::compare)
   int compare(const StringRef &other) const {
-    size_type common = std::min(len_, other.len_);
+    int result = std::memcmp(base_, other.base_, std::min(len_, other.len_));
-    int result = common == 0 ? 0 : std::memcmp(base_, other.base_, common);
     if (result != 0)
       return result;
     if (len_ < other.len_)
@@ -263,14 +258,7 @@ inline double stod(const StringRef &str, size_t *pos = nullptr) {
 
 #ifdef USE_JSON
 // NOLINTNEXTLINE(readability-identifier-naming)
-inline void convertToJson(const StringRef &src, JsonVariant dst) {
+inline void convertToJson(const StringRef &src, JsonVariant dst) { dst.set(src.c_str()); }
-  // Bounded by the view length; a null, empty view becomes "" rather than JSON null
-  if (src.empty()) {
-    dst.set("");
-    return;
-  }
-  dst.set(JsonString(src.c_str(), src.size()));
-}
 #endif  // USE_JSON
 
 }  // namespace esphome

esphome/espota2.py

@@ -11,6 +11,7 @@ import secrets
 import socket
 import time
 from typing import Any
+import zlib
 
 from esphome.core import EsphomeError
 from esphome.helpers import ProgressBar, resolve_ip_address
@@ -65,9 +66,15 @@ CLIENT_FEATURE_SUPPORTS_COMPRESSION = 0x01
 CLIENT_FEATURE_SUPPORTS_SHA256_AUTH = 0x02
 CLIENT_FEATURE_SUPPORTS_EXTENDED_PROTOCOL = 0x04
 CLIENT_FEATURE_SUPPORTS_NOISE = 0x08
+CLIENT_FEATURE_SUPPORTS_DEFLATE = 0x10
 SERVER_FEATURE_SUPPORTS_COMPRESSION = 0x01
 SERVER_FEATURE_SUPPORTS_PARTITION_ACCESS = 0x02
 SERVER_FEATURE_SUPPORTS_NOISE = 0x04
+# Binding once offered: the device then expects the image size and a deflate stream
+SERVER_FEATURE_SUPPORTS_DEFLATE = 0x08
+
+# Wire constant: the deflate bit promises a 4 KB window (OTA_INFLATE_WINDOW_SIZE)
+DEFLATE_WINDOW_BITS = 12
 
 NOISE_FRAME_INDICATOR = 0x01
 NOISE_HANDSHAKE_OK = 0x00
@@ -87,6 +94,9 @@ _SUPPORTED_OTA_TYPES: frozenset[int] = frozenset(
 )
 
 UPLOAD_BLOCK_SIZE = 8192
+# Sizes on the wire are 4 bytes MSB first
+SIZE_FIELD_BYTES = 4
+COMPRESS_LEVEL = 9
 UPLOAD_BUFFER_SIZE = UPLOAD_BLOCK_SIZE * 8
 
 # Flaky Wi-Fi links often drop the first OTA attempt, and the device may need time
@@ -96,6 +106,10 @@ UPLOAD_BUFFER_SIZE = UPLOAD_BLOCK_SIZE * 8
 # across the addresses on top of that.
 EXTRA_UPLOAD_ATTEMPTS = 2
 UPLOAD_RETRY_DELAY = 5.0
+# Data phase timeout; must stay longer than the device's OTA_SOCKET_TIMEOUT_DATA
+# (105 s) so a stalled session is gone before a retry, and long enough for lwIP
+# to get a lost chunk ack through after the retransmit run seen in practice
+DATA_PHASE_TIMEOUT = 160.0
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -547,6 +561,7 @@ def perform_ota(
         CLIENT_FEATURE_SUPPORTS_COMPRESSION
         | CLIENT_FEATURE_SUPPORTS_SHA256_AUTH
         | CLIENT_FEATURE_SUPPORTS_EXTENDED_PROTOCOL
+        | CLIENT_FEATURE_SUPPORTS_DEFLATE
     )
     if noise_psk:
         features_to_send |= CLIENT_FEATURE_SUPPORTS_NOISE
@@ -640,8 +655,16 @@ def perform_ota(
                 f"retry {flag_name}."
             )
 
-    if features & SERVER_FEATURE_SUPPORTS_COMPRESSION:
+    deflate = bool(extended_proto and features & SERVER_FEATURE_SUPPORTS_DEFLATE)
-        upload_contents = gzip.compress(file_contents, compresslevel=9)
+    if deflate:
+        # The device inflates while receiving through a small ring window
+        upload_contents = zlib.compress(
+            file_contents, COMPRESS_LEVEL, wbits=-DEFLATE_WINDOW_BITS
+        )
+        _LOGGER.info("Compressed to %s bytes (deflate)", len(upload_contents))
+    elif features & SERVER_FEATURE_SUPPORTS_COMPRESSION:
+        # The device stores the gzip file and inflates it when it reboots
+        upload_contents = gzip.compress(file_contents, compresslevel=COMPRESS_LEVEL)
         _LOGGER.info("Compressed to %s bytes", len(upload_contents))
     else:
         upload_contents = file_contents
@@ -694,29 +717,26 @@ def perform_ota(
 
     _LOGGER.info("Handshake complete")
 
-    # Timeout must match device-side OTA_SOCKET_TIMEOUT_DATA to prevent premature failures
+    sock.settimeout(DATA_PHASE_TIMEOUT)
-    sock.settimeout(90.0)
 
     if extended_proto:
         send_check(sock, ota_type, "ota type")
 
     upload_size = len(upload_contents)
-    upload_size_encoded = [
-        (upload_size >> 24) & 0xFF,
-        (upload_size >> 16) & 0xFF,
-        (upload_size >> 8) & 0xFF,
-        (upload_size >> 0) & 0xFF,
-    ]
     # The device erases flash between receiving the size and acking the
     # prepare, so this window shows the erase cost (near zero when the
     # device erases lazily during the upload)
     prepare_start = time.perf_counter()
-    send_check(sock, upload_size_encoded, "binary size")
+    send_check(sock, upload_size.to_bytes(SIZE_FIELD_BYTES, "big"), "binary size")
+    if deflate:
+        # Own frame: an encrypted session carries one field per frame
+        send_check(sock, file_size.to_bytes(SIZE_FIELD_BYTES, "big"), "image size")
     receive_exactly(sock, 1, "update prepare result", RESPONSE_UPDATE_PREPARE_OK)
     prepare_duration = time.perf_counter() - prepare_start
     _LOGGER.info("Preparing for upload took %.2f seconds", prepare_duration)
 
-    upload_md5 = hashlib.md5(upload_contents).hexdigest()
+    # The device hashes what it writes: the inflated image, else the received bytes
+    upload_md5 = hashlib.md5(file_contents if deflate else upload_contents).hexdigest()
     _LOGGER.debug("MD5 of upload is %s", upload_md5)
 
     send_check(sock, upload_md5, "file checksum")
@@ -854,7 +874,7 @@ def run_ota_impl_(
     # clean up a half-open connection (its handshake watchdog runs at 20s);
     # moving on to the next address family stays immediate. Known limitation:
     # a silent mid-transfer drop with no reset can wedge the device until its
-    # 90s data timeout, which outlasts this budget; the retries target the
+    # 105s data timeout, which outlasts this budget; the retries target the
     # common failures where the device resets or closes the link promptly.
     total_attempts = len(res) + EXTRA_UPLOAD_ATTEMPTS
     last_error = ""

esphome/happy_eyeballs.py

@@ -69,10 +69,7 @@ def _make_create_connection() -> Callable[..., socket.socket]:
 
     from aiohappyeyeballs import start_connection
     from urllib3.exceptions import LocationParseError
-    from urllib3.util.connection import (  # noqa: PLC2701
+    from urllib3.util.connection import _set_socket_options, allowed_gai_family  # noqa: PLC2701
-        _set_socket_options,
-        allowed_gai_family,
-    )
     from urllib3.util.timeout import _DEFAULT_TIMEOUT  # noqa: PLC2701
 
     from esphome import async_thread

esphome/platformio/library.py

@@ -616,11 +616,15 @@ def _make_registry_client() -> Any:
     elsewhere, not by the PlatformIO registry.
     """
     from platformio.package.manager._registry import PackageManagerRegistryMixin
+    from platformio.registry.client import RegistryClient
 
     class _Registry(PackageManagerRegistryMixin):
         def __init__(self) -> None:
-            self._registry_client = None
             self.pkg_type = "library"
+            self._registry_client = RegistryClient()
+            # The probe sleeps ~500 ms per lookup (see runner.patch_registry_private_packages);
+            # instance-level so the ESPHome process never patches PlatformIO's class
+            self._registry_client.allowed_private_packages = lambda: False
 
         @staticmethod
         def is_system_compatible(value: Any, custom_system: Any = None) -> bool:

esphome/platformio/prefetch.py

@@ -951,8 +951,10 @@ def main(argv: list[str]) -> int:
     """Subprocess entry point: ``prefetch <build_dir> <env_name>``."""
     from esphome.core import CORE
     from esphome.log import setup_log
+    from esphome.platformio.runner import patch_registry_private_packages
 
     signal.signal(signal.SIGTERM, _sigterm)
+    patch_registry_private_packages()
     raw_level = os.environ.get("ESPHOME_PREFETCH_LOG_LEVEL")
     try:
         level = int(raw_level) if raw_level is not None else logging.INFO

esphome/platformio/runner.py

@@ -2,7 +2,8 @@
 
 Invoked via ``python -m esphome.platformio.runner`` instead of
 ``python -m platformio`` so that the patches (incremental rebuild
-preservation, download retries) apply inside the subprocess. Running
+preservation, download retries, skipping the private-package probe) apply
+inside the subprocess. Running
 PlatformIO in a subprocess keeps its ``sys.path`` mutations and other
 global state from leaking into the ESPHome process.
 """
@@ -105,6 +106,16 @@ def patch_file_downloader() -> None:
     FileDownloader.__init__ = patched_init
 
 
+def patch_registry_private_packages() -> None:
+    """Skip PlatformIO's private-package probe; it sleeps ~500 ms per lookup.
+
+    ESPHome never uses private packages, so the answer is always False.
+    """
+    from platformio.registry.client import RegistryClient
+
+    RegistryClient.allowed_private_packages = staticmethod(lambda: False)  # type: ignore[method-assign]
+
+
 _IGNORE_LIB_WARNINGS = "(?:Hash|Update)"
 # Regex patterns matched against each line of PlatformIO output. Lines that
 # match are dropped by RedirectText before they reach the parent process.
@@ -152,6 +163,7 @@ FILTER_PLATFORMIO_LINES = [
 def main() -> int:
     patch_structhash()
     patch_file_downloader()
+    patch_registry_private_packages()
 
     # Wrap stdout/stderr with RedirectText before PlatformIO runs:
     #

platformio.ini

@@ -45,7 +45,7 @@ lib_deps_base =
 lib_deps =
     ${common.lib_deps_base}
     https://github.com/dudanov/MideaUART.git#eeea6c3e9b4474f067054592b435be1c4e466815 ; midea
-    esphome/noise-c@0.1.24                 ; noise (api, ota)
+    esphome/noise-c@0.1.26                 ; noise (api, ota)
     improv/Improv@1.2.7                    ; improv_serial / esp32_improv
     kikuchan98/pngle@1.1.0                 ; online_image
     ; Using the repository directly, otherwise ESP-IDF can't use the library
@@ -244,7 +244,7 @@ lib_deps =
     ${common:idf-component-libs.lib_deps}
     ESP32Async/ESPAsyncWebServer@3.9.6    ; web_server_base
     droscy/esp_wireguard@0.4.5            ; wireguard
-    esphome/noise-c@0.1.24                ; noise (api, ota)
+    esphome/noise-c@0.1.26                ; noise (api, ota)
     ESP32Async/AsyncTCP@3.4.5             ; async_tcp
     DNSServer                             ; captive_portal
     heman/AsyncMqttClient-esphome@2.0.0   ; mqtt
@@ -641,7 +641,7 @@ build_unflags =
 extends = common
 platform = platformio/native
 lib_deps =
-    esphome/noise-c@0.1.24  ; used by noise (api, ota)
+    esphome/noise-c@0.1.26  ; used by noise (api, ota)
     lvgl/lvgl@9.5.0         ; lvgl
 build_flags =
     ${common.build_flags}

requirements.txt

@@ -10,7 +10,7 @@ tzlocal==5.4.4    # from time
 tzdata>=2026.3  # from time
 pyserial==3.5
 platformio==6.1.19
-esptool==5.3.1
+esptool==5.4.0
 click==8.3.3
 aioesphomeapi==46.3.0
 aiohappyeyeballs==2.7.1  # Happy Eyeballs for requests downloads; already pulled in by aioesphomeapi

requirements_dev.txt

@@ -1,4 +1,4 @@
 # Useful stuff when working in a development environment
-clang-format==13.0.1  # also change in .pre-commit-config.yaml and Dockerfile when updating
+clang-format==13.0.1  # .pre-commit-config.yaml rev synced by script/sync_dependency_versions.py
 clang-tidy==22.1.8
-yamllint==1.38.0  # also change in .pre-commit-config.yaml when updating
+yamllint==1.38.0  # .pre-commit-config.yaml rev synced by script/sync_dependency_versions.py

requirements_test.txt

@@ -1,8 +1,9 @@
 pylint==4.0.8
-flake8==7.3.0  # also change in .pre-commit-config.yaml when updating
+flake8==7.3.0  # .pre-commit-config.yaml rev synced by script/sync_dependency_versions.py
-ruff==0.16.5  # also change in .pre-commit-config.yaml when updating
+ruff==0.16.6  # .pre-commit-config.yaml rev synced by script/sync_dependency_versions.py
-pyupgrade==3.21.2  # also change in .pre-commit-config.yaml when updating
+pyupgrade==3.21.2  # .pre-commit-config.yaml rev synced by script/sync_dependency_versions.py
-prek==0.5.1  # also change in .github/workflows/ci.yml when updating
+prek==0.5.2  # .github/workflows/ci.yml reads this pin
+yamlrocks==0.6.1  # used by script/sync_dependency_versions.py
 
 # Unit tests
 pytest==9.1.1

script/api_protobuf/api_protobuf.py

@@ -28,11 +28,6 @@ class WireType(IntEnum):
     END_GROUP = 4  # groups (deprecated)
     FIXED32 = 5  # fixed32, sfixed32, float
 
-    @property
-    def cpp_name(self) -> str:
-        """The matching constant in proto.h."""
-        return f"WIRE_TYPE_{self.name}"
-
 
 # Generate with
 # protoc --python_out=script/api_protobuf -I esphome/components/api/ api_options.proto
@@ -131,10 +126,9 @@ def camel_to_snake(name: str) -> str:
     return re.sub("([a-z0-9])([A-Z])", r"\1_\2", s1).lower()
 
 
-def _encode_call(func: str, *args: str, force: bool = False) -> str:
+def force_str(force: bool) -> str:
-    """Emit one ProtoEncode call; every helper takes the cursor and returns it advanced."""
+    """Convert a boolean force value to string format for C++ code."""
-    suffix = "_force" if force else ""
+    return str(force).lower()
-    return f"pos = ProtoEncode::{func}{suffix}({', '.join(('pos', *args))});"
 
 
 class TypeInfo(ABC):
@@ -229,39 +223,55 @@ class TypeInfo(ABC):
     def class_member(self) -> str:
         return f"{self.cpp_type} {self.field_name}{{{self.default_value}}};"
 
-    def decode_case(self, body: str) -> str:
+    @property
-        """Emit one decode_field() case, keyed on the field's wire tag."""
+    def decode_varint_content(self) -> str:
-        return f"case proto_tag({self.number}, {self.wire_type.cpp_name}):\n" + indent(
+        content = self.decode_varint
-            f"{body}\nbreak;"
+        if content is None:
-        )
+            return None
+        return f"case {self.number}: this->{self.field_name} = {content}; break;"
 
-    # Expression that reads this field from `value`; None when the type is never decoded.
+    decode_varint = None
-    decode_expr: str | None = None
-
-    def _decode_store(self, expr: str) -> str:
-        return f"this->{self.field_name} = {expr};"
 
     @property
-    def decode_content(self) -> str | None:
+    def decode_length_content(self) -> str:
-        """The decode_field() case for this field, or None when it is never decoded."""
+        content = self.decode_length
-        expr = self.decode_expr
+        if content is None:
-        return None if expr is None else self.decode_case(self._decode_store(expr))
+            return None
+        return f"case {self.number}: this->{self.field_name} = {content}; break;"
+
+    decode_length = None
+
+    @property
+    def decode_32bit_content(self) -> str:
+        content = self.decode_32bit
+        if content is None:
+            return None
+        return f"case {self.number}: this->{self.field_name} = {content}; break;"
+
+    decode_32bit = None
+
+    @property
+    def decode_64bit_content(self) -> str:
+        content = self.decode_64bit
+        if content is None:
+            return None
+        return f"case {self.number}: this->{self.field_name} = {content}; break;"
+
+    decode_64bit = None
 
     # Mapping from encode_func to raw encode expression template.
     # When a forced field has a single-byte tag, the code generator emits
     # write_raw_byte(tag) + raw encode instead of the full encode_* method,
     # eliminating the zero-check branch and encode_field_raw indirection.
     # {value} is replaced with the actual field expression.
-    RAW_ENCODE_MAP: dict[str, tuple[str, str]] = {
+    RAW_ENCODE_MAP: dict[str, str] = {
-        "encode_uint32": ("encode_varint_raw", "{value}"),
+        "encode_uint32": "ProtoEncode::encode_varint_raw(pos, {value});",
-        "encode_uint64": ("encode_varint_raw_64", "{value}"),
+        "encode_uint64": "ProtoEncode::encode_varint_raw_64(pos, {value});",
-        "encode_sint32": ("encode_varint_raw_short", "encode_zigzag32({value})"),
+        "encode_sint32": "ProtoEncode::encode_varint_raw_short(pos, encode_zigzag32({value}));",
-        "encode_sint64": ("encode_varint_raw_64", "encode_zigzag64({value})"),
+        "encode_sint64": "ProtoEncode::encode_varint_raw_64(pos, encode_zigzag64({value}));",
-        "encode_int64": ("encode_varint_raw_64", "static_cast<uint64_t>({value})"),
+        "encode_int64": "ProtoEncode::encode_varint_raw_64(pos, static_cast<uint64_t>({value}));",
-        "encode_bool": ("write_raw_byte", "{value} ? 0x01 : 0x00"),
+        "encode_bool": "ProtoEncode::write_raw_byte(pos, {value} ? 0x01 : 0x00);",
     }
-    # Fixed32 value expression for the shared tag+fixed32 writer; None for other wire types
-    fixed32_value_template: str | None = None
 
     def _encode_with_precomputed_tag(self, value_expr: str) -> str | None:
         """Try to emit a precomputed-tag encode for a field.
@@ -278,17 +288,12 @@ class TypeInfo(ABC):
             return None
         max_val = self.max_value
         # Only use RAW_ENCODE_MAP for forced fields or fields with max_value
-        raw = None
+        raw_expr = None
         if self.force or max_val is not None:
-            raw = self.RAW_ENCODE_MAP.get(self.encode_func)
+            raw_expr = self.RAW_ENCODE_MAP.get(self.encode_func)
-        if raw is None:
+        if raw_expr is None:
             return None
-        func, arg = raw
+        body = f"ProtoEncode::write_raw_byte(pos, {tag});\n{raw_expr.format(value=value_expr)}"
-        body = (
-            _encode_call("write_raw_byte", str(tag))
-            + "\n"
-            + _encode_call(func, arg.format(value=value_expr))
-        )
         if self.force:
             return body
         # Non-forced with max_value: inline zero-check + raw encode
@@ -309,44 +314,23 @@ class TypeInfo(ABC):
             return None
         # When max_len < 128, length varint is always 1 byte
         len_encode = (
-            _encode_call("write_raw_byte", f"static_cast<uint8_t>({len_expr})")
+            f"ProtoEncode::write_raw_byte(pos, static_cast<uint8_t>({len_expr}));"
             if max_len is not None and max_len < 128
-            else _encode_call("encode_varint_raw", len_expr)
+            else f"ProtoEncode::encode_varint_raw(pos, {len_expr});"
         )
-        return "\n".join(
-            (
-                _encode_call("write_raw_byte", str(tag)),
-                len_encode,
-                _encode_call("encode_raw", data_expr, len_expr),
-            )
-        )
-
-    def _encode_fixed32_with_precomputed_tag(self, value: str) -> str | None:
-        """Single-byte tag fixed32 write, or None for other types and multi-byte tags."""
-        tag = self.calculate_tag()
-        if self.fixed32_value_template is None or tag >= 128:
-            return None
-        value_expr = self.fixed32_value_template.format(value=value)
-        if self.force:
-            return _encode_call("write_tag_and_fixed32", str(tag), value_expr)
         return (
-            f"if (uint32_t raw = {value_expr}; raw != 0) [[likely]] {{\n"
+            f"ProtoEncode::write_raw_byte(pos, {tag});\n"
-            f"  {_encode_call('write_tag_and_fixed32', str(tag), 'raw')}\n"
+            f"{len_encode}\n"
-            "}"
+            f"ProtoEncode::encode_raw(pos, {data_expr}, {len_expr});"
         )
 
     @property
     def encode_content(self) -> str:
-        value = f"this->{self.field_name}"
+        if result := self._encode_with_precomputed_tag(f"this->{self.field_name}"):
-        if result := self._encode_with_precomputed_tag(value):
             return result
-        if result := self._encode_fixed32_with_precomputed_tag(value):
+        if self.force:
-            return result
+            return f"ProtoEncode::{self.encode_func}(pos, {self.number}, this->{self.field_name}, true);"
-        return _encode_call(self.encode_func, str(self.number), value, force=self.force)
+        return f"ProtoEncode::{self.encode_func}(pos, {self.number}, this->{self.field_name});"
-
-    def encode_element(self, number: int, element: str) -> str:
-        """Encode one element of a repeated field; elements are always written."""
-        return _encode_call(self.encode_func, str(number), element, force=True)
 
     encode_func = None
 
@@ -566,17 +550,17 @@ def create_field_type_info(
         # For messages that decode (SOURCE_CLIENT or SOURCE_BOTH), use pointer
         # for zero-copy access to the receive buffer
         if needs_decode:
-            return PointerToBytesBufferType(field, needs_decode)
+            return PointerToBytesBufferType(field, None)
 
         # For SOURCE_SERVER (encode only), explicit annotation is still needed
         if get_field_opt(field, pb.pointer_to_buffer, False):
-            return PointerToBytesBufferType(field, needs_decode)
+            return PointerToBytesBufferType(field, None)
 
         return BytesType(field, needs_decode, needs_encode)
 
     # Special handling for string fields - use StringRef for zero-copy
     if field.type == 9:
-        return PointerToStringBufferType(field, needs_decode)
+        return PointerToStringBufferType(field, None)
 
     validate_field_type(field.type, field.name)
     if field.type == 11:
@@ -621,6 +605,7 @@ class DoubleType(FixedSizeTypeMixin, TypeInfo):
     # Unsupported but defined for completeness
     cpp_type = "double"
     default_value = "0.0"
+    decode_64bit = "value.as_double()"
     encode_func = "encode_double"
     wire_type = WireType.FIXED64  # Uses wire type 1 according to protobuf spec
 
@@ -646,12 +631,10 @@ class DoubleType(FixedSizeTypeMixin, TypeInfo):
 class FloatType(FixedSizeTypeMixin, TypeInfo):
     cpp_type = "float"
     default_value = "0.0f"
-    decode_expr = "value.as_float()"
+    decode_32bit = "value.as_float()"
     encode_func = "encode_float"
     wire_type = WireType.FIXED32  # Uses wire type 5
 
-    fixed32_value_template = "float_to_raw({value})"
-
     def dump(self, name: str) -> str:
         o = f'snprintf(buffer, sizeof(buffer), "%g", {name});\n'
         o += "out.append(buffer);"
@@ -675,7 +658,7 @@ class Int64Type(VarintTypeMixin, TypeInfo):
     cpp_type = "int64_t"
     _varint_max_bits = 64
     default_value = "0"
-    decode_expr = "static_cast<int64_t>(value.as_varint())"
+    decode_varint = "static_cast<int64_t>(value)"
     encode_func = "encode_int64"
     wire_type = WireType.VARINT  # Uses wire type 0
 
@@ -696,7 +679,7 @@ class UInt64Type(VarintTypeMixin, TypeInfo):
     cpp_type = "uint64_t"
     _varint_max_bits = 64
     default_value = "0"
-    decode_expr = "value.as_varint()"
+    decode_varint = "value"
     encode_func = "encode_uint64"
     wire_type = WireType.VARINT  # Uses wire type 0
 
@@ -714,11 +697,11 @@ class UInt64Type(VarintTypeMixin, TypeInfo):
         return self._get_simple_size_calculation(name, force, "uint64")
 
     @property
-    def RAW_ENCODE_MAP(self) -> dict[str, tuple[str, str]]:  # noqa: N802
+    def RAW_ENCODE_MAP(self) -> dict[str, str]:  # noqa: N802
         if self.mac_address:
             return {
                 **TypeInfo.RAW_ENCODE_MAP,
-                "encode_uint64": ("encode_varint_raw_48bit", "{value}"),
+                "encode_uint64": "ProtoEncode::encode_varint_raw_48bit(pos, {value});",
             }
         return TypeInfo.RAW_ENCODE_MAP
 
@@ -731,7 +714,7 @@ class Int32Type(VarintTypeMixin, TypeInfo):
     cpp_type = "int32_t"
     _varint_max_bits = 64  # int32 is sign-extended to 64 bits in protobuf
     default_value = "0"
-    decode_expr = "static_cast<int32_t>(value.as_varint())"
+    decode_varint = "static_cast<int32_t>(value)"
     encode_func = "encode_int32"
     wire_type = WireType.VARINT  # Uses wire type 0
 
@@ -751,6 +734,7 @@ class Int32Type(VarintTypeMixin, TypeInfo):
 class Fixed64Type(FixedSizeTypeMixin, TypeInfo):
     cpp_type = "uint64_t"
     default_value = "0"
+    decode_64bit = "value.as_fixed64()"
     encode_func = "encode_fixed64"
     wire_type = WireType.FIXED64  # Uses wire type 1
 
@@ -776,7 +760,7 @@ class Fixed64Type(FixedSizeTypeMixin, TypeInfo):
 class Fixed32Type(FixedSizeTypeMixin, TypeInfo):
     cpp_type = "uint32_t"
     default_value = "0"
-    decode_expr = "value.as_fixed32()"
+    decode_32bit = "value.as_fixed32()"
     encode_func = "encode_fixed32"
     wire_type = WireType.FIXED32  # Uses wire type 5
 
@@ -785,7 +769,15 @@ class Fixed32Type(FixedSizeTypeMixin, TypeInfo):
         o += "out.append(buffer);"
         return o
 
-    fixed32_value_template = "{value}"
+    @property
+    def encode_content(self) -> str:
+        tag = self.calculate_tag()
+        if self.force and tag < 128:
+            # Emit combined tag+value write: precomputed tag + direct memcpy
+            return f"ProtoEncode::write_tag_and_fixed32(pos, {tag}, this->{self.field_name});"
+        if self.force:
+            return f"ProtoEncode::{self.encode_func}(pos, {self.number}, this->{self.field_name}, true);"
+        return f"ProtoEncode::{self.encode_func}(pos, {self.number}, this->{self.field_name});"
 
     def get_size_calculation(self, name: str, force: bool = False) -> str:
         field_id_size = self.calculate_field_id_size()
@@ -805,7 +797,7 @@ class BoolType(VarintTypeMixin, TypeInfo):
     _varint_max_bits = 1
     cpp_type = "bool"
     default_value = "false"
-    decode_expr = "value.as_bool()"
+    decode_varint = "value != 0"
     encode_func = "encode_bool"
     wire_type = WireType.VARINT  # Uses wire type 0
 
@@ -825,7 +817,7 @@ class StringType(TypeInfo):
     default_value = ""
     reference_type = "std::string &"
     const_reference_type = "const std::string &"
-    decode_expr = "value.as_string()"
+    decode_length = "value.as_string()"
     encode_func = "encode_string"
     wire_type = WireType.LENGTH_DELIMITED  # Uses wire type 2
 
@@ -859,12 +851,9 @@ class StringType(TypeInfo):
             f"this->{self.field_name}_ref_.size()",
         ):
             return result
-        return _encode_call(
+        if self.force:
-            "encode_string",
+            return f"ProtoEncode::encode_string(pos, {self.number}, this->{self.field_name}_ref_, true);"
-            str(self.number),
+        return f"ProtoEncode::encode_string(pos, {self.number}, this->{self.field_name}_ref_);"
-            f"this->{self.field_name}_ref_",
-            force=self.force,
-        )
 
     def dump(self, name):
         # If name is 'it', this is a repeated field element - always use string
@@ -940,9 +929,6 @@ class MessageType(TypeInfo):
     def can_use_dump_field(cls) -> bool:
         return False
 
-    def encode_element(self, number: int, element: str) -> str:
-        return _encode_call("encode_sub_message", "buffer", str(number), element)
-
     @property
     def cpp_type(self) -> str:
         return self._field.type_name[1:]
@@ -965,9 +951,15 @@ class MessageType(TypeInfo):
     @property
     def encode_content(self) -> str:
         # Sub-message encoding needs buffer for backpatch/sync
-        return _encode_call(
+        return f"ProtoEncode::{self.encode_func}(pos, buffer, {self.number}, this->{self.field_name});"
-            self.encode_func, "buffer", str(self.number), f"this->{self.field_name}"
+
-        )
+    @property
+    def decode_length(self) -> str:
+        # Override to return None for message types because we can't use template-based
+        # decoding when the specific message type isn't known at compile time.
+        # Instead, we use the non-template decode_to_message() method which allows
+        # runtime polymorphism through virtual function calls.
+        return None
 
     @property
     def public_content(self) -> list[str]:
@@ -984,14 +976,19 @@ class MessageType(TypeInfo):
         )
 
     @property
-    def decode_content(self) -> str:
+    def decode_length_content(self) -> str:
-        body = f"value.decode_to_message(this->{self.field_name});"
+        # Custom decode that doesn't use templates
         if self._track_presence:
             # decode_to_message() cannot report failure, so setting the flag
             # afterwards only documents intent; a status-returning decode could
             # gate it for real without touching callers.
-            body += f"\nthis->has_{self.name} = true;"
+            return (
-        return self.decode_case(body)
+                f"case {self.number}:\n"
+                f"      value.decode_to_message(this->{self.field_name});\n"
+                f"      this->has_{self.name} = true;\n"
+                f"      break;"
+            )
+        return f"case {self.number}: value.decode_to_message(this->{self.field_name}); break;"
 
     def dump(self, name: str) -> str:
         return f"{name}.dump_to(out);"
@@ -1030,7 +1027,7 @@ class BytesType(TypeInfo):
     reference_type = "std::string &"
     const_reference_type = "const std::string &"
     encode_func = "encode_bytes"
-    decode_expr = "value.as_string()"
+    decode_length = "value.as_string()"
     wire_type = WireType.LENGTH_DELIMITED  # Uses wire type 2
 
     @property
@@ -1061,13 +1058,9 @@ class BytesType(TypeInfo):
             f"this->{self.field_name}_ptr_", f"this->{self.field_name}_len_"
         ):
             return result
-        return _encode_call(
+        if self.force:
-            "encode_bytes",
+            return f"ProtoEncode::encode_bytes(pos, {self.number}, this->{self.field_name}_ptr_, this->{self.field_name}_len_, true);"
-            str(self.number),
+        return f"ProtoEncode::encode_bytes(pos, {self.number}, this->{self.field_name}_ptr_, this->{self.field_name}_len_);"
-            f"this->{self.field_name}_ptr_",
-            f"this->{self.field_name}_len_",
-            force=self.force,
-        )
 
     def dump(self, name: str) -> str:
         ptr_dump = f"format_hex_pretty(this->{self.field_name}_ptr_, this->{self.field_name}_len_)"
@@ -1134,12 +1127,16 @@ class PointerToBufferTypeBase(TypeInfo):
     def can_use_dump_field(cls) -> bool:
         return False
 
-    # Only here to make needs_decode required: the null string default keys off it, so a call
-    # site must not fall back on the base class default
     def __init__(
-        self, field: descriptor.FieldDescriptorProto, needs_decode: bool
+        self, field: descriptor.FieldDescriptorProto, size: int | None = None
     ) -> None:
-        super().__init__(field, needs_decode)
+        super().__init__(field)
+        self.array_size = 0
+
+    @property
+    def decode_length(self) -> str | None:
+        # This is handled in decode_length_content
+        return None
 
     @property
     def wire_type(self) -> WireType:
@@ -1173,20 +1170,17 @@ class PointerToBytesBufferType(PointerToBufferTypeBase):
             f"this->{self.field_name}", f"this->{self.field_name}_len"
         ):
             return result
-        return _encode_call(
+        if self.force:
-            "encode_bytes",
+            return f"ProtoEncode::encode_bytes(pos, {self.number}, this->{self.field_name}, this->{self.field_name}_len, true);"
-            str(self.number),
+        return f"ProtoEncode::encode_bytes(pos, {self.number}, this->{self.field_name}, this->{self.field_name}_len);"
-            f"this->{self.field_name}",
-            f"this->{self.field_name}_len",
-            force=self.force,
-        )
 
     @property
-    def decode_content(self) -> str:
+    def decode_length_content(self) -> str | None:
-        return self.decode_case(
+        return f"""case {self.number}: {{
-            f"this->{self.field_name} = value.data();\n"
+      this->{self.field_name} = value.data();
-            f"this->{self.field_name}_len = value.size();",
+      this->{self.field_name}_len = value.size();
-        )
+      break;
+    }}"""
 
     def dump(self, name: str) -> str:
         return (
@@ -1220,53 +1214,34 @@ class PointerToStringBufferType(PointerToBufferTypeBase):
     def can_use_dump_field(cls) -> bool:
         return True
 
-    @property
-    def _starts_null(self) -> bool:
-        """A field that is only encoded, and skipped when empty, never has its pointer read
-        before it is set, so it can default to a null StringRef and the message constructs as
-        one zero fill. Any encode path that copies unconditionally must check this."""
-        return not self._needs_decode and not self.force
-
     @property
     def public_content(self) -> list[str]:
-        if self._starts_null:
-            return [
-                f"StringRef {self.field_name}{{nullptr, 0}};  // null until set, encode only"
-            ]
         return [f"StringRef {self.field_name}{{}};"]
 
     @property
     def encode_content(self) -> str:
         max_len = self.max_data_length
         if max_len is not None and max_len < 128 and self.force:
-            assert not self._starts_null, (
-                "unconditional copy of a field that may start null"
-            )
             tag = self.calculate_tag()
             if tag < 128:
-                return _encode_call(
+                return f"ProtoEncode::encode_short_string_force(pos, {tag}, this->{self.field_name});"
-                    "encode_short_string_force", str(tag), f"this->{self.field_name}"
-                )
         if result := self._encode_bytes_with_precomputed_tag(
             f"this->{self.field_name}.c_str()",
             f"this->{self.field_name}.size()",
         ):
-            assert not self._starts_null, (
-                "unconditional copy of a field that may start null"
-            )
             return result
-        return _encode_call(
+        if self.force:
-            "encode_string",
+            return f"ProtoEncode::encode_string(pos, {self.number}, this->{self.field_name}, true);"
-            str(self.number),
+        return (
-            f"this->{self.field_name}",
+            f"ProtoEncode::encode_string(pos, {self.number}, this->{self.field_name});"
-            force=self.force,
         )
 
     @property
-    def decode_content(self) -> str:
+    def decode_length_content(self) -> str | None:
-        return self.decode_case(
+        return f"""case {self.number}: {{
-            f"this->{self.field_name} = StringRef(value.data(), value.size());",
+      this->{self.field_name} = StringRef(reinterpret_cast<const char *>(value.data()), value.size());
-        )
+      break;
+    }}"""
 
     def dump(self, name: str) -> str:
         # Not used since we use dump_field, but required by abstract base class
@@ -1335,13 +1310,14 @@ class PackedBufferTypeInfo(TypeInfo):
         ]
 
     @property
-    def decode_content(self) -> str:
+    def decode_length_content(self) -> str:
         """Store pointer to buffer and calculate count of packed varints."""
-        return self.decode_case(
+        return f"""case {self.number}: {{
-            f"this->{self.field_name}_data_ = value.data();\n"
+      this->{self.field_name}_data_ = value.data();
-            f"this->{self.field_name}_length_ = value.size();\n"
+      this->{self.field_name}_length_ = value.size();
-            f"this->{self.field_name}_count_ = count_packed_varints(value.data(), value.size());",
+      this->{self.field_name}_count_ = count_packed_varints(value.data(), value.size());
-        )
+      break;
+    }}"""
 
     @property
     def encode_content(self) -> str:
@@ -1426,11 +1402,17 @@ class FixedArrayBytesType(TypeInfo):
         ]
 
     @property
-    def decode_content(self) -> str:
+    def decode_length_content(self) -> str:
-        return self.decode_case(
+        o = f"case {self.number}: {{\n"
-            f"this->{self.field_name}_len = std::min<size_t>(value.size(), {self.array_size});\n"
+        o += "  const std::string &data_str = value.as_string();\n"
-            f"memcpy(this->{self.field_name}, value.data(), this->{self.field_name}_len);",
+        o += f"  this->{self.field_name}_len = data_str.size();\n"
-        )
+        o += f"  if (this->{self.field_name}_len > {self.array_size}) {{\n"
+        o += f"    this->{self.field_name}_len = {self.array_size};\n"
+        o += "  }\n"
+        o += f"  memcpy(this->{self.field_name}, data_str.data(), this->{self.field_name}_len);\n"
+        o += "  break;\n"
+        o += "}"
+        return o
 
     @property
     def encode_content(self) -> str:
@@ -1439,13 +1421,9 @@ class FixedArrayBytesType(TypeInfo):
             f"this->{self.field_name}", f"this->{self.field_name}_len", max_len=max_len
         ):
             return result
-        return _encode_call(
+        if self.force:
-            "encode_bytes",
+            return f"ProtoEncode::encode_bytes(pos, {self.number}, this->{self.field_name}, this->{self.field_name}_len, true);"
-            str(self.number),
+        return f"ProtoEncode::encode_bytes(pos, {self.number}, this->{self.field_name}, this->{self.field_name}_len);"
-            f"this->{self.field_name}",
-            f"this->{self.field_name}_len",
-            force=self.force,
-        )
 
     def dump(self, name: str) -> str:
         return f"out.append(format_hex_pretty({name}, {name}_len));"
@@ -1493,7 +1471,7 @@ class UInt32Type(VarintTypeMixin, TypeInfo):
     cpp_type = "uint32_t"
     _varint_max_bits = 32
     default_value = "0"
-    decode_expr = "value.as_varint()"
+    decode_varint = "value"
     encode_func = "encode_uint32"
     wire_type = WireType.VARINT  # Uses wire type 0
 
@@ -1516,21 +1494,13 @@ class UInt32Type(VarintTypeMixin, TypeInfo):
 class EnumType(VarintTypeMixin, TypeInfo):
     _varint_max_bits = 32
 
-    def encode_element(self, number: int, element: str) -> str:
-        return _encode_call(
-            self.encode_func,
-            str(number),
-            f"static_cast<uint32_t>({element})",
-            force=True,
-        )
-
     @property
     def cpp_type(self) -> str:
         return f"enums::{self._field.type_name[1:]}"
 
     @property
-    def decode_expr(self) -> str:
+    def decode_varint(self) -> str:
-        return f"static_cast<{self.cpp_type}>(value.as_varint())"
+        return f"static_cast<{self.cpp_type}>(value)"
 
     default_value = ""
     wire_type = WireType.VARINT  # Uses wire type 0
@@ -1550,9 +1520,9 @@ class EnumType(VarintTypeMixin, TypeInfo):
     @property
     def encode_content(self) -> str:
         value_expr = f"static_cast<uint32_t>(this->{self.field_name})"
-        return _encode_call(
+        if self.force:
-            self.encode_func, str(self.number), value_expr, force=self.force
+            return f"ProtoEncode::{self.encode_func}(pos, {self.number}, {value_expr}, true);"
-        )
+        return f"ProtoEncode::{self.encode_func}(pos, {self.number}, {value_expr});"
 
     def dump(self, name: str) -> str:
         return f"out.append_p(proto_enum_to_string<{self.cpp_type}>({name}));"
@@ -1577,7 +1547,7 @@ class EnumType(VarintTypeMixin, TypeInfo):
 class SFixed32Type(FixedSizeTypeMixin, TypeInfo):
     cpp_type = "int32_t"
     default_value = "0"
-    decode_expr = "value.as_sfixed32()"
+    decode_32bit = "value.as_sfixed32()"
     encode_func = "encode_sfixed32"
     wire_type = WireType.FIXED32  # Uses wire type 5
 
@@ -1603,6 +1573,7 @@ class SFixed32Type(FixedSizeTypeMixin, TypeInfo):
 class SFixed64Type(FixedSizeTypeMixin, TypeInfo):
     cpp_type = "int64_t"
     default_value = "0"
+    decode_64bit = "value.as_sfixed64()"
     encode_func = "encode_sfixed64"
     wire_type = WireType.FIXED64  # Uses wire type 1
 
@@ -1629,7 +1600,7 @@ class SInt32Type(VarintTypeMixin, TypeInfo):
     cpp_type = "int32_t"
     _varint_max_bits = 32  # zigzag encoding keeps it 32-bit
     default_value = "0"
-    decode_expr = "decode_zigzag32(static_cast<uint32_t>(value.as_varint()))"
+    decode_varint = "decode_zigzag32(static_cast<uint32_t>(value))"
     encode_func = "encode_sint32"
     wire_type = WireType.VARINT  # Uses wire type 0
 
@@ -1650,7 +1621,7 @@ class SInt64Type(VarintTypeMixin, TypeInfo):
     cpp_type = "int64_t"
     _varint_max_bits = 64
     default_value = "0"
-    decode_expr = "decode_zigzag64(value.as_varint())"
+    decode_varint = "decode_zigzag64(value)"
     encode_func = "encode_sint64"
     wire_type = WireType.VARINT  # Uses wire type 0
 
@@ -1730,9 +1701,9 @@ def _generate_inline_encode_block(
 
     lines = []
     lines.append(f"auto &sub_msg = {element};")
-    lines.append(_encode_call("write_raw_byte", str(tag)))
+    lines.append(f"ProtoEncode::write_raw_byte(pos, {tag});")
     lines.append("uint8_t *len_pos = pos;")
-    lines.append(_encode_call("reserve_byte"))
+    lines.append("ProtoEncode::reserve_byte(pos);")
 
     # Generate inline field encoding for each sub-message field
     for field in sub_desc.field:
@@ -1803,11 +1774,18 @@ class FixedArrayRepeatedType(TypeInfo):
 
     def _encode_element(self, element: str) -> str:
         """Helper to generate encode statement for a single element."""
-        if isinstance(self._ti, MessageType) and _is_inline_encode(self._ti.cpp_type):
+        if isinstance(self._ti, EnumType):
-            return _generate_inline_encode_block(
+            return f"ProtoEncode::{self._ti.encode_func}(pos, {self.number}, static_cast<uint32_t>({element}), true);"
-                self.number, self._ti.cpp_type, element
+        # Repeated message elements use encode_sub_message (force=true is default)
-            )
+        if isinstance(self._ti, MessageType):
-        return self._ti.encode_element(self.number, element)
+            if _is_inline_encode(self._ti.cpp_type):
+                return _generate_inline_encode_block(
+                    self.number, self._ti.cpp_type, element
+                )
+            return f"ProtoEncode::encode_sub_message(pos, buffer, {self.number}, {element});"
+        return (
+            f"ProtoEncode::{self._ti.encode_func}(pos, {self.number}, {element}, true);"
+        )
 
     @property
     def cpp_type(self) -> str:
@@ -2101,23 +2079,55 @@ class RepeatedTypeInfo(TypeInfo):
         return self._ti.wire_type
 
     @property
-    def decode_expr(self) -> str | None:
+    def decode_varint_content(self) -> str:
-        return self._ti.decode_expr
-
-    def _decode_store(self, expr: str) -> str:
-        return f"this->{self.field_name}.push_back({expr});"
-
-    @property
-    def decode_content(self) -> str | None:
         # Pointer fields don't support decoding
         if self._use_pointer:
             return None
-        if isinstance(self._ti, MessageType):
+        content = self._ti.decode_varint
-            return self.decode_case(
+        if content is None:
-                f"this->{self.field_name}.emplace_back();\n"
+            return None
-                f"value.decode_to_message(this->{self.field_name}.back());"
+        return (
-            )
+            f"case {self.number}: this->{self.field_name}.push_back({content}); break;"
-        return super().decode_content
+        )
+
+    @property
+    def decode_length_content(self) -> str:
+        # Pointer fields don't support decoding
+        if self._use_pointer:
+            return None
+        content = self._ti.decode_length
+        if content is None and isinstance(self._ti, MessageType):
+            # Special handling for non-template message decoding
+            return f"case {self.number}: this->{self.field_name}.emplace_back(); value.decode_to_message(this->{self.field_name}.back()); break;"
+        if content is None:
+            return None
+        return (
+            f"case {self.number}: this->{self.field_name}.push_back({content}); break;"
+        )
+
+    @property
+    def decode_32bit_content(self) -> str:
+        # Pointer fields don't support decoding
+        if self._use_pointer:
+            return None
+        content = self._ti.decode_32bit
+        if content is None:
+            return None
+        return (
+            f"case {self.number}: this->{self.field_name}.push_back({content}); break;"
+        )
+
+    @property
+    def decode_64bit_content(self) -> str:
+        # Pointer fields don't support decoding
+        if self._use_pointer:
+            return None
+        content = self._ti.decode_64bit
+        if content is None:
+            return None
+        return (
+            f"case {self.number}: this->{self.field_name}.push_back({content}); break;"
+        )
 
     @property
     def _ti_is_bool(self) -> bool:
@@ -2125,7 +2135,15 @@ class RepeatedTypeInfo(TypeInfo):
         return isinstance(self._ti, BoolType)
 
     def _encode_element_call(self, element: str) -> str:
-        return self._ti.encode_element(self.number, element)
+        """Helper to generate encode call for a single element."""
+        if isinstance(self._ti, EnumType):
+            return f"ProtoEncode::{self._ti.encode_func}(pos, {self.number}, static_cast<uint32_t>({element}), true);"
+        # Repeated message elements use encode_sub_message (force=true is default)
+        if isinstance(self._ti, MessageType):
+            return f"ProtoEncode::encode_sub_message(pos, buffer, {self.number}, {element});"
+        return (
+            f"ProtoEncode::{self._ti.encode_func}(pos, {self.number}, {element}, true);"
+        )
 
     @property
     def encode_content(self) -> str:
@@ -2134,7 +2152,7 @@ class RepeatedTypeInfo(TypeInfo):
             # Special handling for const char* elements (when container_no_template contains "const char")
             if "const char" in self._container_no_template:
                 o = f"for (const char *it : *this->{self.field_name}) {{\n"
-                o += f"  {_encode_call(self._ti.encode_func, str(self.number), 'it', 'strlen(it)', force=True)}\n"
+                o += f"  ProtoEncode::{self._ti.encode_func}(pos, {self.number}, it, strlen(it), true);\n"
             else:
                 o = f"for (const auto &it : *this->{self.field_name}) {{\n"
                 o += f"  {self._encode_element_call('it')}\n"
@@ -2520,7 +2538,10 @@ def build_message_type(
 ) -> tuple[str, str, str]:
     public_content: list[str] = []
     protected_content: list[str] = []
-    decode: list[str] = []
+    decode_varint: list[str] = []
+    decode_length: list[str] = []
+    decode_32bit: list[str] = []
+    decode_64bit: list[str] = []
     encode: list[str] = []
     dump: list[str] = []
     size_calc: list[str] = []
@@ -2649,8 +2670,22 @@ def build_message_type(
             if field.options.HasExtension(pb.field_ifdef):
                 field_ifdef = field.options.Extensions[pb.field_ifdef]
 
-            if case := ti.decode_content:
+            if ti.decode_varint_content:
-                decode.extend(wrap_with_ifdef(case, field_ifdef))
+                decode_varint.extend(
+                    wrap_with_ifdef(ti.decode_varint_content, field_ifdef)
+                )
+            if ti.decode_length_content:
+                decode_length.extend(
+                    wrap_with_ifdef(ti.decode_length_content, field_ifdef)
+                )
+            if ti.decode_32bit_content:
+                decode_32bit.extend(
+                    wrap_with_ifdef(ti.decode_32bit_content, field_ifdef)
+                )
+            if ti.decode_64bit_content:
+                decode_64bit.extend(
+                    wrap_with_ifdef(ti.decode_64bit_content, field_ifdef)
+                )
         if ti.dump_content:
             # Check for field_ifdef option for dump as well
             field_ifdef = None
@@ -2660,15 +2695,49 @@ def build_message_type(
             dump.extend(wrap_with_ifdef(ti.dump_content, field_ifdef))
 
     cpp = ""
-    if decode:
+    if decode_varint:
-        o = f"void {desc.name}::decode_field(uint32_t tag, const uint8_t *data, proto_varint_value_t scalar) {{\n"
+        o = f"bool {desc.name}::decode_varint(uint32_t field_id, proto_varint_value_t value) {{\n"
-        o += "  const ProtoFieldValue value(data, scalar);\n"
+        o += "  switch (field_id) {\n"
-        o += "  switch (tag) {\n"
+        o += indent("\n".join(decode_varint), "    ") + "\n"
-        o += indent("\n".join(decode), "    ") + "\n"
+        o += "    default: return false;\n"
         o += "  }\n"
+        o += "  return true;\n"
         o += "}\n"
         cpp += o
-        prot = "void decode_field(uint32_t tag, const uint8_t *data, proto_varint_value_t scalar) override;"
+        prot = "bool decode_varint(uint32_t field_id, proto_varint_value_t value) override;"
+        protected_content.insert(0, prot)
+    if decode_length:
+        o = f"bool {desc.name}::decode_length(uint32_t field_id, ProtoLengthDelimited value) {{\n"
+        o += "  switch (field_id) {\n"
+        o += indent("\n".join(decode_length), "    ") + "\n"
+        o += "    default: return false;\n"
+        o += "  }\n"
+        o += "  return true;\n"
+        o += "}\n"
+        cpp += o
+        prot = "bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;"
+        protected_content.insert(0, prot)
+    if decode_32bit:
+        o = f"bool {desc.name}::decode_32bit(uint32_t field_id, Proto32Bit value) {{\n"
+        o += "  switch (field_id) {\n"
+        o += indent("\n".join(decode_32bit), "    ") + "\n"
+        o += "    default: return false;\n"
+        o += "  }\n"
+        o += "  return true;\n"
+        o += "}\n"
+        cpp += o
+        prot = "bool decode_32bit(uint32_t field_id, Proto32Bit value) override;"
+        protected_content.insert(0, prot)
+    if decode_64bit:
+        o = f"bool {desc.name}::decode_64bit(uint32_t field_id, Proto64Bit value) {{\n"
+        o += "  switch (field_id) {\n"
+        o += indent("\n".join(decode_64bit), "    ") + "\n"
+        o += "    default: return false;\n"
+        o += "  }\n"
+        o += "  return true;\n"
+        o += "}\n"
+        cpp += o
+        prot = "bool decode_64bit(uint32_t field_id, Proto64Bit value) override;"
         protected_content.insert(0, prot)
 
     # Generate custom decode() override for messages with FixedVector fields
@@ -2715,36 +2784,28 @@ def build_message_type(
             )
             for line in encode
         ]
-        o = f"{speed_attr}uint8_t *{desc.name}::encode_msg(const void *self, ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) {{\n"
+        o = f"{speed_attr}uint8_t *{desc.name}::encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) const {{\n"
-        o += f"  const auto &msg = *static_cast<const {desc.name} *>(self);\n"
         o += "  uint8_t *__restrict__ pos = buffer.get_pos();\n"
-        o += indent("\n".join(encode_debug)).replace("this->", "msg.") + "\n"
+        o += indent("\n".join(encode_debug)) + "\n"
         o += "  return pos;\n"
         o += "}\n"
         cpp += o
-        public_content.append(
+        prot = (
-            "static uint8_t *encode_msg(const void *self, ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM);"
+            "uint8_t *encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) const;"
-        )
-        public_content.append(
-            "uint8_t *encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) const {\n"
-            "  return encode_msg(this, buffer PROTO_ENCODE_DEBUG_ARG);\n"
-            "}"
         )
+        public_content.append(prot)
     # If no fields to encode or message doesn't need encoding, the default implementation in ProtoMessage will be used
 
     # Add calculate_size method only if this message needs encoding and has fields
     if needs_encode and size_calc and not is_inline_only:
-        o = f"{speed_attr}uint32_t {desc.name}::calc_size_msg(const void *self) {{\n"
+        o = f"{speed_attr}uint32_t {desc.name}::calculate_size() const {{\n"
-        o += f"  const auto &msg = *static_cast<const {desc.name} *>(self);\n"
         o += "  uint32_t size = 0;\n"
-        o += indent("\n".join(size_calc)).replace("this->", "msg.") + "\n"
+        o += indent("\n".join(size_calc)) + "\n"
         o += "  return size;\n"
         o += "}\n"
         cpp += o
-        public_content.append("static uint32_t calc_size_msg(const void *self);")
+        prot = "uint32_t calculate_size() const;"
-        public_content.append(
+        public_content.append(prot)
-            "uint32_t calculate_size() const { return calc_size_msg(this); }"
-        )
     # If no fields to calculate size for or message doesn't need encoding, the default implementation in ProtoMessage will be used
 
     # dump_to method declaration in header

script/ci-custom.py

@@ -823,6 +823,8 @@ def lint_relative_py_import(fname: Path, line, col, content):
         # neither can live in a C++ namespace.
         "esphome/components/esp32_hosted/esp_now_hosted.cpp",
         "esphome/components/esp32_hosted/esp_now_hosted_rpc.h",
+        # C header shared with the vendored decoder
+        "esphome/components/esphome/ota/ota_esphome_inflate.h",
     ],
 )
 def lint_namespace(fname: Path, content: str) -> str | None:

script/git-hooks/post-checkout

@@ -14,7 +14,31 @@ top=$(git rev-parse --show-toplevel 2>/dev/null) || exit 0
 [ -x "$top/venv/bin/python" ] && exit 0
 [ -x "$top/script/setup" ] || exit 0
 
+# Every worktree shares the hooks directory of the checkout it was created
+# from, and the script/setup run below is the one from whichever branch was just
+# checked out. Older branches install their own pre-commit hook without checking
+# for a worktree: that moves the shared hook aside as pre-commit.legacy and
+# replaces it with one tied to this worktree's virtual environment, so commits
+# break in every checkout. To rule that out, the hooks directory is copied
+# before script/setup runs and put back exactly as it was afterwards, including
+# removing any file script/setup added.
+hooks=$(git rev-parse --path-format=absolute --git-path hooks 2>/dev/null) || exit 0
+snap=$(mktemp -d "$hooks/.post-checkout.XXXXXX") || exit 0
+cp -p "$hooks"/* "$snap"/ 2>/dev/null
+
 # Clear VIRTUAL_ENV so a checkout made from a shell with an environment already
 # activated still gets its own, rather than having the active one repointed at
 # this working tree.
-exec env -u VIRTUAL_ENV "$top/script/setup"
+env -u VIRTUAL_ENV "$top/script/setup"
+status=$?
+
+for f in "$hooks"/*; do
+  [ -e "$snap/${f##*/}" ] || rm -f "$f"
+done
+# Files are moved rather than copied so a hook that is still running, such as
+# this one, is swapped out atomically instead of being rewritten in place.
+for f in "$snap"/*; do
+  cmp -s "$f" "$hooks/${f##*/}" 2>/dev/null || mv -f "$f" "$hooks/${f##*/}"
+done
+rm -rf "$snap"
+exit $status

script/helpers.py

@@ -1104,6 +1104,10 @@ def get_components_per_integration_fixture() -> dict[str, set[str]]:
 
 
 _TEST_FUNC_RE = re.compile(r"async def (test_\w+)")
+# Any usage form (decorator, pytestmark assignment or list element); only
+# test_*.py files are scanned, so the marker docs elsewhere cannot false-hit
+_SHARED_YAML_USE_RE = re.compile(r"\bmark\.shared_yaml")
+_SHARED_YAML_ARG_RE = re.compile(r"\(\s*[\"'](\w+)[\"']\s*\)")
 
 
 @cache
@@ -1123,6 +1127,19 @@ def get_fixture_to_test_files() -> dict[str, frozenset[str]]:
         for func in _TEST_FUNC_RE.findall(content):
             base_name = func.replace("test_", "").partition("[")[0]
             result.setdefault(base_name, set()).add(rel_path)
+        # Shared fixtures are named by marker, not by a test function; each
+        # decorator must carry a string literal or its fixture would silently
+        # map to no tests
+        for use in _SHARED_YAML_USE_RE.finditer(content):
+            arg = _SHARED_YAML_ARG_RE.match(content, use.end())
+            if arg is None:
+                line = content.count("\n", 0, use.start()) + 1
+                raise ValueError(
+                    f"{rel_path}:{line}: shared_yaml marker must take a "
+                    "single-line string literal so CI test selection can map "
+                    "its fixture"
+                )
+            result.setdefault(arg.group(1), set()).add(rel_path)
 
     return {k: frozenset(v) for k, v in result.items()}
 

script/sync_dependency_versions.py

@@ -0,0 +1,164 @@
+#!/usr/bin/env python3
+"""Keep pre-commit hook revs in sync with the requirements files.
+
+Dependabot only bumps the ``package==version`` pins in ``requirements*.txt``.
+Some of those tools are pinned a second time as hook ``rev`` values in
+``.pre-commit-config.yaml``. This script treats the requirements files as
+the source of truth and rewrites the revs to match, editing the config
+through yamlrocks so comments and layout survive.
+
+Run without arguments to apply the changes in place, or with ``--check`` to
+only report drift (exit status 1 when anything is out of sync).
+"""
+
+from __future__ import annotations
+
+import argparse
+from dataclasses import dataclass
+from pathlib import Path
+import re
+import sys
+from typing import Any
+
+import yamlrocks
+
+REPO_ROOT = Path(__file__).resolve().parent.parent
+PRECOMMIT_CONFIG = ".pre-commit-config.yaml"
+
+
+class SyncError(Exception):
+    """A pin could not be located in a requirements file or the config."""
+
+
+@dataclass(frozen=True)
+class SyncTarget:
+    """A requirements pin and the pre-commit repo whose rev mirrors it."""
+
+    package: str
+    requirements_file: str
+    repo: str
+
+
+SYNC_TARGETS: tuple[SyncTarget, ...] = (
+    SyncTarget(
+        "ruff", "requirements_test.txt", "https://github.com/astral-sh/ruff-pre-commit"
+    ),
+    SyncTarget("flake8", "requirements_test.txt", "https://github.com/PyCQA/flake8"),
+    SyncTarget(
+        "pyupgrade", "requirements_test.txt", "https://github.com/asottile/pyupgrade"
+    ),
+    SyncTarget(
+        "clang-format",
+        "requirements_dev.txt",
+        "https://github.com/pre-commit/mirrors-clang-format",
+    ),
+    SyncTarget(
+        "yamllint",
+        "requirements_dev.txt",
+        "https://github.com/adrienverge/yamllint.git",
+    ),
+)
+
+
+def read_requirement_version(requirements: str, package: str) -> str | None:
+    """Return the ``==`` pin for ``package`` or None when it is not pinned."""
+    pattern = re.compile(
+        rf"^{re.escape(package)}==(?P<version>[^\s#]+)",
+        re.MULTILINE | re.IGNORECASE,
+    )
+    match = pattern.search(requirements)
+    return match.group("version") if match else None
+
+
+def find_repo_entry(doc: Any, repo: str) -> Any:
+    """Return the single ``- repo:`` block for ``repo`` in a pre-commit doc."""
+    try:
+        entries = [entry for entry in doc["repos"] if entry["repo"] == repo]
+    except KeyError as err:
+        raise SyncError(f"malformed pre-commit config, missing key {err}") from None
+    if len(entries) != 1:
+        raise SyncError(
+            f"expected exactly one block for repo {repo}, found {len(entries)}"
+        )
+    return entries[0]
+
+
+def current_rev(entry: Any, repo: str) -> tuple[str, str]:
+    """Split the block's rev into its tag prefix (``v`` or empty) and version."""
+    if "rev" not in entry:
+        raise SyncError(f"repo {repo} has no rev")
+    rev = entry["rev"]
+    if not isinstance(rev, str):
+        # A rev such as ``1.0`` parses as a number and cannot be compared or
+        # rewritten safely; quote it in the config instead.
+        raise SyncError(f"rev of repo {repo} is not a string: {rev!r}")
+    prefix = "v" if rev.startswith("v") else ""
+    return prefix, rev.removeprefix("v")
+
+
+def sync(root: Path, *, write: bool) -> list[str]:
+    """Bring every hook rev in line with its requirements pin.
+
+    Returns one description per rev that was (or, when ``write`` is False,
+    would be) changed. Raises SyncError when a pin cannot be found, which
+    means SYNC_TARGETS has gone stale and needs updating by hand.
+    """
+    config_path = root / PRECOMMIT_CONFIG
+    doc = yamlrocks.loads(config_path.read_bytes(), option=yamlrocks.OPT_ROUND_TRIP)
+    requirements: dict[str, str] = {}
+    changes: list[str] = []
+    for target in SYNC_TARGETS:
+        if target.requirements_file not in requirements:
+            requirements[target.requirements_file] = (
+                root / target.requirements_file
+            ).read_text()
+        version = read_requirement_version(
+            requirements[target.requirements_file], target.package
+        )
+        if version is None:
+            raise SyncError(
+                f"{target.requirements_file}: no '{target.package}==' pin found"
+            )
+
+        entry = find_repo_entry(doc, target.repo)
+        prefix, current = current_rev(entry, target.repo)
+        if current == version:
+            continue
+        changes.append(f"{target.package}: {current} -> {version}")
+        entry["rev"] = f"{prefix}{version}"
+
+    if changes and write:
+        config_path.write_bytes(doc.to_yaml())
+    return changes
+
+
+def main(argv: list[str] | None = None) -> int:
+    parser = argparse.ArgumentParser(description=__doc__.splitlines()[0])
+    parser.add_argument(
+        "--check",
+        action="store_true",
+        help="report drift without modifying any file; exit 1 if out of sync",
+    )
+    parser.add_argument(
+        "--root",
+        type=Path,
+        default=REPO_ROOT,
+        help="repository checkout to operate on (default: this checkout)",
+    )
+    args = parser.parse_args(argv)
+
+    try:
+        changes = sync(args.root, write=not args.check)
+    except SyncError as err:
+        print(f"error: {err}", file=sys.stderr)
+        return 1
+
+    for change in changes:
+        print(change)
+    if args.check and changes:
+        return 1
+    return 0
+
+
+if __name__ == "__main__":  # pragma: no cover
+    sys.exit(main())

tests/benchmarks/components/api/bench_proto_proxy.cpp

@@ -249,7 +249,7 @@ static APIBuffer build_infrared_rf_transmit_wire() {
   std::memcpy(bytes + len, packed, packed_len);
   len += packed_len;
   // field 6: modulation = 1 (non-zero so it's actually emitted and exercises
-  // decode_field for this field, matching the documented layout above).
+  // decode_varint for this field, matching the documented layout above).
   put_byte(0x30);
   put_varint(1);
 

tests/component_tests/lvgl/config/keyboard_no_label.yaml

@@ -0,0 +1,32 @@
+esphome:
+  name: test-keyboard-no-label
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+
+spi:
+  - id: spi_bus
+    clk_pin: GPIO18
+    mosi_pin: GPIO23
+
+display:
+  - platform: mipi_spi
+    spi_id: spi_bus
+    model: st7789v
+    id: tft_display
+    dimensions:
+      width: 240
+      height: 320
+    cs_pin: GPIO22
+    dc_pin: GPIO21
+    auto_clear_enabled: false
+    invert_colors: false
+    update_interval: never
+
+lvgl:
+  displays: tft_display
+  widgets:
+    - keyboard:
+        id: keyboard_widget

tests/component_tests/lvgl/config/qrcode_no_label.yaml

@@ -0,0 +1,34 @@
+esphome:
+  name: test-qrcode-no-label
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+
+spi:
+  - id: spi_bus
+    clk_pin: GPIO18
+    mosi_pin: GPIO23
+
+display:
+  - platform: mipi_spi
+    spi_id: spi_bus
+    model: st7789v
+    id: tft_display
+    dimensions:
+      width: 240
+      height: 320
+    cs_pin: GPIO22
+    dc_pin: GPIO21
+    auto_clear_enabled: false
+    invert_colors: false
+    update_interval: never
+
+lvgl:
+  displays: tft_display
+  widgets:
+    - qrcode:
+        id: qr_widget
+        size: 100
+        text: "esphome.io"

tests/component_tests/lvgl/config/tabview_no_label.yaml

@@ -0,0 +1,35 @@
+esphome:
+  name: test-tabview-no-label
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+
+spi:
+  - id: spi_bus
+    clk_pin: GPIO18
+    mosi_pin: GPIO23
+
+display:
+  - platform: mipi_spi
+    spi_id: spi_bus
+    model: st7789v
+    id: tft_display
+    dimensions:
+      width: 240
+      height: 320
+    cs_pin: GPIO22
+    dc_pin: GPIO21
+    auto_clear_enabled: false
+    invert_colors: false
+    update_interval: never
+
+lvgl:
+  displays: tft_display
+  widgets:
+    - tabview:
+        id: tabview_widget
+        tabs:
+          - name: "Tab 1"
+            id: tab_1

tests/component_tests/lvgl/test_widget_label_dependency.py

@@ -0,0 +1,32 @@
+"""Widgets whose LVGL C implementation creates or references labels
+internally (tab titles, key legends, the QR canvas fallback) must declare
+the label dependency in ``get_uses()``. Otherwise a config that contains
+no ``label`` widget of its own compiles LVGL without ``LV_USE_LABEL`` and
+fails at C compile time with undefined ``lv_label_*`` symbols.
+"""
+
+from __future__ import annotations
+
+from collections.abc import Callable
+from pathlib import Path
+
+import pytest
+
+from esphome.components.lvgl import defines as df
+
+
+@pytest.mark.parametrize(
+    "yaml_file",
+    [
+        "qrcode_no_label.yaml",
+        "keyboard_no_label.yaml",
+        "tabview_no_label.yaml",
+    ],
+)
+def test_label_less_config_enables_lv_use_label(
+    generate_main: Callable[[str | Path], str],
+    component_config_path: Callable[[str], Path],
+    yaml_file: str,
+) -> None:
+    generate_main(component_config_path(yaml_file))
+    assert "LV_USE_LABEL" in df.get_defines()

tests/components/api/test_proto_mac_varint.cpp

@@ -59,7 +59,7 @@ static void verify_mac(uint64_t mac, size_t expected_bytes) {
 #ifdef ESPHOME_DEBUG_API
   uint8_t *proto_debug_end_ = api_buf.data() + api_buf.size();
 #endif
-  pos = ProtoEncode::encode_varint_raw_48bit(pos PROTO_ENCODE_DEBUG_ARG, mac);
+  ProtoEncode::encode_varint_raw_48bit(pos PROTO_ENCODE_DEBUG_ARG, mac);
   size_t new_len = pos - api_buf.data();
 
   EXPECT_EQ(new_len, expected_bytes) << "mac=0x" << std::hex << mac << std::dec;

tests/components/atm90e32/__init__.py

@@ -0,0 +1,5 @@
+from tests.testing_helpers import ComponentManifestOverride
+
+
+def override_manifest(manifest: ComponentManifestOverride) -> None:
+    manifest.dependencies = manifest.dependencies + ["sensor", "spi"]

tests/components/atm90e32/offset_register_verification_test.cpp

@@ -0,0 +1,62 @@
+#include <gtest/gtest.h>
+
+#include "esphome/components/atm90e32/atm90e32.h"
+
+namespace esphome::atm90e32::testing {
+
+TEST(ATM90E32OffsetRegisterVerification, AcceptsExactSignedReadback) {
+  EXPECT_TRUE(offset_register_value_matches(0x007B, 123));
+  EXPECT_TRUE(offset_register_value_matches(0xFF85, -123));
+}
+
+TEST(ATM90E32OffsetRegisterVerification, RejectsMismatchedReadback) {
+  EXPECT_FALSE(offset_register_value_matches(0x007C, 123));
+  EXPECT_FALSE(offset_register_value_matches(0xFF84, -123));
+}
+
+TEST(ATM90E32OffsetRestoreState, ReportsVerifiedStoredValuesAsRestored) {
+  const auto state = resolve_offset_restore_state(true, true, false);
+
+  EXPECT_TRUE(state.restored);
+  EXPECT_TRUE(state.values_verified);
+}
+
+TEST(ATM90E32OffsetRestoreState, ReportsVerifiedConfigFallbackAsNotRestored) {
+  const auto state = resolve_offset_restore_state(true, false, true);
+
+  EXPECT_FALSE(state.restored);
+  EXPECT_TRUE(state.values_verified);
+}
+
+TEST(ATM90E32OffsetRestoreState, ReportsFailedConfigFallbackAsUnverified) {
+  const auto state = resolve_offset_restore_state(true, false, false);
+
+  EXPECT_FALSE(state.restored);
+  EXPECT_FALSE(state.values_verified);
+}
+
+TEST(ATM90E32OffsetRestoreState, ReportsConfigWithoutStoredValuesAsNotRestored) {
+  const auto state = resolve_offset_restore_state(false, true, false);
+
+  EXPECT_FALSE(state.restored);
+  EXPECT_TRUE(state.values_verified);
+}
+
+TEST(ATM90E32OffsetPersistence, RollsBackStoredValuesOrZeroSentinel) {
+  const OffsetCalibration previous[3]{{1, -1}, {2, -2}, {3, -3}};
+  OffsetCalibration rollback[3]{};
+
+  prepare_offset_rollback(previous, true, rollback);
+  for (uint8_t phase = 0; phase < 3; phase++) {
+    EXPECT_EQ(rollback[phase].first_offset, previous[phase].first_offset);
+    EXPECT_EQ(rollback[phase].second_offset, previous[phase].second_offset);
+  }
+
+  prepare_offset_rollback(previous, false, rollback);
+  for (const auto &phase : rollback) {
+    EXPECT_EQ(phase.first_offset, 0);
+    EXPECT_EQ(phase.second_offset, 0);
+  }
+}
+
+}  // namespace esphome::atm90e32::testing

tests/components/core/test_string_ref.cpp

@@ -59,47 +59,4 @@ TEST(StringRefStartsWith, RefOverloadComparesOnlyTheViewedLength) {
   EXPECT_TRUE(ref.starts_with(prefix));
 }
 
-// The generated api messages start their encode only string fields as a null pointer with zero
-// length; every member must treat that exactly like the default constructed empty string.
-TEST(StringRefNullEmpty, BehavesAsEmptyString) {
-  const StringRef null_empty{nullptr, 0};
-  const StringRef empty;
-  EXPECT_TRUE(null_empty.empty());
-  EXPECT_EQ(null_empty.size(), 0u);
-  EXPECT_EQ(null_empty.c_str(), nullptr);
-  EXPECT_TRUE(null_empty == empty);
-  EXPECT_TRUE(null_empty == "");
-  EXPECT_TRUE(null_empty == std::string());
-  EXPECT_EQ(null_empty.compare(empty), 0);
-  EXPECT_EQ(null_empty.compare(""), 0);
-  EXPECT_LT(null_empty.compare("a"), 0);
-  EXPECT_TRUE(null_empty.starts_with(""));
-  EXPECT_FALSE(null_empty.starts_with("a"));
-  EXPECT_EQ(null_empty.str(), std::string());
-  EXPECT_EQ(null_empty.substr(0), std::string());
-  EXPECT_EQ(null_empty.find('a'), std::string::npos);
-  EXPECT_EQ(null_empty.find("a"), std::string::npos);
-  char buf[4] = "xyz";
-  EXPECT_EQ(null_empty.copy(buf, sizeof(buf)), 0u);
-  EXPECT_EQ(null_empty.begin(), null_empty.end());
-}
-
-TEST(StringRefNullEmpty, ComparesAgainstText) {
-  const StringRef null_empty{nullptr, 0};
-  const StringRef text("abc", 3);
-  EXPECT_FALSE(null_empty == text);
-  EXPECT_FALSE(text == null_empty);
-  EXPECT_LT(null_empty.compare(text), 0);
-  EXPECT_GT(text.compare(null_empty), 0);
-  EXPECT_TRUE(text.starts_with(null_empty));
-}
-
-TEST(StringRefNullEmpty, TwoNullViewsAreEqual) {
-  const StringRef a{nullptr, 0};
-  const StringRef b{nullptr, 0};
-  EXPECT_TRUE(a == b);
-  EXPECT_EQ(a.compare(b), 0);
-  EXPECT_TRUE(a.starts_with(b));
-}
-
 }  // namespace esphome::core::testing

tests/components/esphome/__init__.py

@@ -0,0 +1,12 @@
+from esphome.loader import FileResource
+from tests.testing_helpers import ComponentManifestOverride
+
+
+def override_manifest(manifest: ComponentManifestOverride) -> None:
+    # to_code emits the component count the application needs
+    manifest.enable_codegen()
+    # Only the decoder is under test; its ota platform is not in this build
+    manifest.resources = manifest.resources + [
+        FileResource("esphome.components.esphome", "ota/ota_esphome_inflate.c"),
+        FileResource("esphome.components.esphome", "ota/ota_esphome_inflate.h"),
+    ]

tests/components/esphome/test_ota_inflate.cpp

@@ -0,0 +1,324 @@
+#include <gtest/gtest.h>
+
+#include <cstdint>
+#include <cstring>
+#include <vector>
+
+#include "esphome/components/esphome/ota/ota_esphome_inflate.h"
+
+namespace esphome::testing {
+
+// build_plain() compressed with the CLI's window (espota2.DEFLATE_WINDOW_BITS):
+//   DEFLATED = zlib.compress(plain, 9, wbits=-12)
+//   STORED = zlib.compress(plain[:300], 0, wbits=-12)
+static const uint8_t DEFLATED[] = {
+    0xed, 0xc8, 0xf7, 0x3f, 0xd4, 0x0f, 0x03, 0x00, 0x70, 0x67, 0xaf, 0x4b, 0x67, 0x66, 0x9f, 0x90, 0x91, 0x11, 0xc2,
+    0x11, 0x91, 0xb8, 0xb3, 0xf7, 0x3a, 0xd9, 0x5f, 0x4e, 0x99, 0x67, 0x1e, 0xce, 0x8a, 0xac, 0xec, 0x59, 0xb8, 0xc2,
+    0x95, 0x5d, 0x56, 0x42, 0x67, 0x73, 0x46, 0xf6, 0xca, 0xce, 0xc8, 0xc8, 0xc8, 0x91, 0x8a, 0x7c, 0x2f, 0x7a, 0xfe,
+    0x86, 0xe7, 0x87, 0xe7, 0x87, 0xe7, 0xf5, 0xfa, 0xbc, 0x7f, 0x7c, 0xbb, 0x07, 0xa2, 0x1f, 0xfa, 0xf9, 0xb8, 0x43,
+    0xfd, 0x82, 0x5c, 0xa0, 0x6e, 0xee, 0x28, 0x6f, 0x97, 0x20, 0x77, 0xa8, 0x3b, 0x70, 0xc0, 0x01, 0x07, 0x1c, 0x70,
+    0xc0, 0x01, 0x07, 0x1c, 0x70, 0xc0, 0x01, 0x07, 0x1c, 0x70, 0xc0, 0x01, 0x07, 0x1c, 0x70, 0xc0, 0x01, 0x07, 0x1c,
+    0x70, 0xc0, 0x01, 0xf7, 0x5f, 0xdd, 0x40, 0xd4, 0x63, 0x2f, 0x03, 0xf2, 0x17, 0xb2, 0xe5, 0x69, 0xc7, 0x5a, 0x04,
+    0xdf, 0x46, 0x22, 0xa8, 0x4b, 0x6e, 0xd5, 0x3a, 0x80, 0x05, 0xe1, 0x81, 0x4a, 0x44, 0x56, 0x27, 0xa9, 0x21, 0xf7,
+    0xad, 0xd9, 0xb0, 0xd3, 0xf1, 0xa5, 0x0b, 0x6a, 0x96, 0x56, 0xb2, 0xca, 0xb5, 0xee, 0x0f, 0x96, 0x28, 0xc3, 0x9e,
+    0x8f, 0x6e, 0xf2, 0x84, 0xa4, 0x3b, 0x2d, 0x16, 0x64, 0x08, 0x6a, 0x28, 0x91, 0xee, 0x87, 0x1a, 0x81, 0xff, 0xed,
+    0x2c, 0x5f, 0xda, 0x4a, 0x48, 0x5f, 0x91, 0xf0, 0x31, 0xfe, 0x6b, 0xbd, 0x81, 0x86, 0x92, 0x33, 0x1a, 0x6c, 0x69,
+    0x32, 0xfb, 0x19, 0x56, 0x2c, 0xc6, 0xaa, 0xef, 0xe8, 0x16, 0x98, 0xcf, 0x98, 0xbf, 0xa0, 0x2d, 0xde, 0x7f, 0xdf,
+    0x4b, 0xcb, 0xf6, 0x5c, 0xaf, 0x11, 0x24, 0xf0, 0x46, 0x3e, 0x49, 0x0e, 0x67, 0x0e, 0xcf, 0xf3, 0x57, 0xca, 0xb0,
+    0x39, 0x55, 0xe1, 0xe7, 0xfc, 0x37, 0x29, 0xe8, 0xd7, 0xf3, 0x08, 0x2e, 0xfb, 0x7b, 0x6d, 0x3e, 0xfe, 0xe9, 0x2c,
+    0x68, 0xe4, 0x20, 0x88, 0x57, 0x56, 0x41, 0x3d, 0xab, 0x9b, 0xbf, 0x0c, 0x0c, 0xae, 0x51, 0x48, 0x8b, 0x72, 0xcc,
+    0xb8, 0xbb, 0xf3, 0x30, 0xa8, 0x5c, 0xb5, 0xa1, 0x2f, 0x07, 0x52, 0xe9, 0x36, 0xb8, 0x3c, 0xbc, 0xee, 0xbc, 0xf1,
+    0xa3, 0x8b, 0x81, 0xc2, 0x03, 0xbf, 0x29, 0x5a, 0x22, 0x24, 0x97, 0xf8, 0xc9, 0xb5, 0xbf, 0xd2, 0x24, 0x4a, 0x86,
+    0xc1, 0x2b, 0xb7, 0xb8, 0xde, 0xa7, 0xea, 0xa5, 0x1d, 0x13, 0x1c, 0x1d, 0xd3, 0x3c, 0x81, 0x60, 0x2e, 0x2f, 0x93,
+    0x5c, 0x78, 0x43, 0x2e, 0x39, 0x68, 0x09, 0x13, 0x09, 0x10, 0xce, 0xd6, 0x8d, 0xe9, 0x2f, 0xaf, 0x88, 0x6f, 0x99,
+    0x4f, 0xcd, 0xdc, 0xaa, 0xf9, 0x47, 0xdb, 0x1c, 0xb5, 0x89, 0x53, 0x10, 0x3d, 0x77, 0xac, 0x26, 0x04, 0x3a, 0x3b,
+    0x18, 0xf8, 0x47, 0x75, 0x56, 0xa5, 0xda, 0x70, 0xfb, 0xf7, 0x0d, 0x3b, 0x6e, 0x4b, 0x2a, 0xbc, 0x49, 0x32, 0x43,
+    0x95, 0x62, 0x83, 0x3d, 0xdc, 0x0a, 0x1f, 0x1d, 0xf9, 0x59, 0x6b, 0x95, 0xf0, 0x9b, 0xf5, 0x53, 0x9e, 0xb5, 0x65,
+    0xeb, 0x74, 0xfa, 0x81, 0x9b, 0x61, 0xa3, 0x57, 0x2f, 0xda, 0x2c, 0xcd, 0xf8, 0xb0, 0x74, 0xb9, 0x62, 0x39, 0x91,
+    0xd9, 0x7d, 0xb3, 0x03, 0x65, 0x2e, 0x66, 0x20, 0x18, 0xac, 0xa2, 0xeb, 0x3b, 0x35, 0x98, 0xa3, 0x28, 0x46, 0x30,
+    0xee, 0xd3, 0xeb, 0x47, 0x49, 0x11, 0xc5, 0xcd, 0xa0, 0xa5, 0x1c, 0x2e, 0x9d, 0x14, 0xd6, 0x46, 0x4a, 0x05, 0x7b,
+    0xd3, 0xb9, 0x0d, 0xeb, 0xd7, 0x6f, 0xb5, 0xf4, 0xed, 0x3f, 0x27, 0xb8, 0xec, 0x51, 0xb1, 0x6e, 0xb0, 0x14, 0xed,
+    0xdf, 0x90, 0x72, 0x59, 0x71, 0xd5, 0xf5, 0xf2, 0x61, 0x5f, 0xa7, 0x8a, 0xd7, 0x0f, 0x80, 0x2f, 0xe5, 0x0f, 0x45,
+    0xf2, 0x4d, 0xd1, 0xdc, 0xdd, 0xce, 0x46, 0xdf, 0x77, 0xf2, 0xa6, 0xa2, 0x79, 0x77, 0xf0, 0x0e, 0xaa, 0x68, 0x14,
+    0x85, 0x32, 0x05, 0x29, 0x75, 0x2b, 0x6c, 0xb0, 0x7c, 0x84, 0xc9, 0xec, 0x49, 0x70, 0x9b, 0x38, 0x36, 0x4c, 0xe9,
+    0xa5, 0xdc, 0xb1, 0xb8, 0x28, 0xd6, 0x20, 0x89, 0x8a, 0x2a, 0x62, 0xc1, 0x90, 0x3a, 0x43, 0x48, 0xaa, 0xfc, 0xec,
+    0x52, 0xf4, 0x02, 0xa7, 0xcd, 0x46, 0xf9, 0x78, 0x64, 0x4f, 0xad, 0x6b, 0x17, 0xdb, 0x56, 0xa2, 0xa1, 0x6a, 0xcf,
+    0x3b, 0x66, 0x64, 0x01, 0xc2, 0xd6, 0xae, 0x23, 0x34, 0x82, 0x60, 0x0a, 0x3a, 0xe4, 0xdd, 0x7f, 0xaa, 0x97, 0x44,
+    0x9a, 0x63, 0x8f, 0xaf, 0xa9, 0x97, 0x5a, 0x55, 0xcc, 0x81, 0x48, 0x83, 0xf8, 0xe6, 0xc5, 0xef, 0xdf, 0xfa, 0x5a,
+    0x4f, 0x7f, 0x18, 0x56, 0xc0, 0x66, 0x36, 0xad, 0x8a, 0x79, 0xab, 0xde, 0xf4, 0x7b, 0x70, 0x98, 0xea, 0xfa, 0xf4,
+    0xc7, 0x01, 0x31, 0x16, 0xea, 0xf1, 0x70, 0x8d, 0xee, 0x87, 0x52, 0x13, 0x01, 0x9e, 0x0c, 0xbd, 0x5a, 0x14, 0x01,
+    0x8e, 0xf7, 0x6e, 0xff, 0xce, 0x7f, 0xa4, 0xd1, 0xa1, 0x6a, 0x9b, 0x95, 0xb2, 0x31, 0x8a, 0x6f, 0xc8, 0xfe, 0x8c,
+    0x29, 0x55, 0xbc, 0xfc, 0x61, 0xd0, 0xde, 0xb0, 0xa9, 0x0c, 0x01, 0x0f, 0xba, 0x77, 0x7e, 0x77, 0xd9, 0x76, 0xa4,
+    0xfd, 0xab, 0x38, 0x18, 0x92, 0xec, 0xf0, 0xd3, 0x57, 0x7f, 0xf4, 0xbd, 0x65, 0xd4, 0x77, 0x8e, 0xa1, 0x92, 0x82,
+    0x0c, 0x7b, 0x34, 0xd3, 0x11, 0xfb, 0xc0, 0x36, 0x23, 0x8e, 0xbb, 0x89, 0xdf, 0x70, 0xdc, 0x9a, 0x76, 0x45, 0x0b,
+    0x22, 0xfa, 0x35, 0xdf, 0x8f, 0x45, 0x48, 0x7d, 0xed, 0xdc, 0x06, 0x01, 0x5e, 0xbb, 0xe9, 0xf9, 0x07, 0x93, 0xf6,
+    0x69, 0x6f, 0xf1, 0xfc, 0xfd, 0xfa, 0x41, 0xc0, 0x13, 0x9e, 0x74, 0x2d, 0x76, 0xfe, 0xa7, 0xbe, 0x4e, 0xd9, 0xaa,
+    0x64, 0xa6, 0xed, 0xd3, 0xad, 0xee, 0x62, 0x9d, 0x39, 0xc9, 0xb8, 0xae, 0x86, 0x31, 0x4f, 0x62, 0x57, 0xea, 0xea,
+    0x5a, 0xe3, 0x59, 0xd8, 0x99, 0xb3, 0xcd, 0x9f, 0x3b, 0xea, 0x58, 0x99, 0x11, 0xdc, 0x3d, 0xac, 0x58, 0xd9, 0xa6,
+    0xae, 0x2d, 0x07, 0x1d, 0xd7, 0xfa, 0x87, 0x78, 0xa7, 0x7f, 0x2a, 0x4f, 0x25, 0x58, 0xef, 0x53, 0x78, 0x2e, 0x93,
+    0xdc, 0x44, 0xcc, 0x53, 0x88, 0x77, 0x1c, 0xda, 0x14, 0xaf, 0xe1, 0x67, 0x92, 0xff, 0x36, 0x96, 0x20, 0x6f, 0x9d,
+    0x2c, 0x7f, 0xea, 0x31, 0xf2, 0x34, 0x50, 0xc2, 0x39, 0x84, 0xee, 0x4c, 0xbe, 0xca, 0x06, 0x6f, 0x67, 0x42, 0xea,
+    0x13, 0x58, 0xee, 0xdd, 0x8e, 0x29, 0x4f, 0xee, 0xd8, 0x93, 0x0d, 0x45, 0x80, 0x4d, 0xf3, 0x12, 0x79, 0xbb, 0x36,
+    0xa3, 0x73, 0x95, 0x95, 0xb6, 0xfc, 0x54, 0x60, 0xb2, 0xcc, 0x71, 0xaa, 0xf1, 0x6b, 0x66, 0xed, 0xba, 0x8b, 0xd6,
+    0x6d, 0x61, 0x79, 0x61, 0x1d, 0xb3, 0xba, 0xa6, 0x2f, 0xaa, 0xdc, 0x1d, 0xb8, 0x22, 0xd8, 0x98, 0x58, 0xed, 0x4d,
+    0x3c, 0xea, 0xa9, 0x37, 0x5e, 0x5e, 0x7b, 0x47, 0xa1, 0x7a, 0x39, 0x42, 0xe4, 0x3b, 0xbb, 0x69, 0x0a, 0x8b, 0x32,
+    0x6e, 0x63, 0xeb, 0x87, 0xf6, 0x5d, 0xaa, 0xbf, 0xbe, 0xc5, 0xb2, 0x85, 0x60, 0xdc, 0x32, 0x07, 0x85, 0x73, 0x3d,
+    0x96, 0x8b, 0x89, 0x71, 0x52, 0xb4, 0x93, 0xe6, 0x18, 0xad, 0xbf, 0xce, 0x21, 0x1d, 0x33, 0xb5, 0xb3, 0x35, 0x6a,
+    0x5b, 0xe7, 0x47, 0x13, 0x19, 0x8f, 0x53, 0xf4, 0x0c, 0x2a, 0x39, 0x16, 0x37, 0x39, 0x3b, 0x5f, 0x81, 0x51, 0xbc,
+    0x23, 0x92, 0x2c, 0x8d, 0xbf, 0x2f, 0xee, 0xbf, 0xed, 0x9d, 0x3f, 0xe0, 0x16, 0x21, 0x5a, 0x57, 0xa6, 0x8c, 0x58,
+    0x7a, 0xd5, 0xa1, 0x6d, 0xed, 0xe8, 0x90, 0x97, 0x14, 0xb4, 0x6b, 0xa5, 0x3b, 0xd7, 0x90, 0x84, 0x9e, 0x07, 0xc2,
+    0x7f, 0x1e, 0x08, 0xa0, 0x6f, 0x69, 0xf1, 0xcc, 0x4e, 0xca, 0x07, 0x64, 0xa2, 0xb4, 0xbc, 0x5f, 0xe0, 0xa7, 0x0e,
+    0x31, 0x77, 0x6f, 0x35, 0xd7, 0x66, 0x83, 0x5d, 0x64, 0x4e, 0xf1, 0x3c, 0x7a, 0xcb, 0xa5, 0xfc, 0xc9, 0x95, 0xab,
+    0x27, 0x30, 0x6b, 0x82, 0x57, 0xcd, 0xb0, 0x85, 0x9d, 0xc5, 0xa9, 0x0f, 0xdb, 0xe3, 0x5a, 0xc1, 0xb2, 0x3f, 0xfa,
+    0xea, 0xf3, 0x3a, 0xa0, 0xe4, 0xad, 0xd7, 0x14, 0xcf, 0x4f, 0xc9, 0x46, 0x09, 0x6e, 0x70, 0x27, 0xe4, 0x9b, 0x5f,
+    0x61, 0x4a, 0xb2, 0xfb, 0xc3, 0xf0, 0x3a, 0x53, 0x38, 0x2a, 0x59, 0x48, 0x2b, 0xab, 0x21, 0x64, 0x1a, 0x1c, 0x90,
+    0xb6, 0x69, 0xbb, 0x89, 0xe3, 0x9a, 0x12, 0xb7, 0xfd, 0x47, 0xcc, 0x57, 0xdb, 0x2b, 0xf6, 0x35, 0xe1, 0x79, 0xe0,
+    0xbf, 0x6d, 0x7f, 0x71, 0x3c, 0x21, 0x27, 0x82, 0x12, 0x05, 0xae, 0x43, 0x11, 0x0f, 0xc8, 0xe7, 0x3c, 0xf0, 0x0b,
+    0xe4, 0x69, 0xff, 0xb2, 0xda, 0x9e, 0x7f, 0xfe, 0xa4, 0x3f, 0xdf, 0x02, 0x58, 0xaa, 0x60, 0xd2, 0x8e, 0xd5, 0x6c,
+    0x92, 0x22, 0x38, 0xb1, 0xd2, 0x84, 0x80, 0xea, 0xce, 0xfe, 0x34, 0x79, 0xd6, 0x94, 0xb0, 0xad, 0x51, 0x67, 0x65,
+    0xf5, 0xab, 0xd5, 0x18, 0x05, 0x92, 0x8a, 0x24, 0x36, 0xc2, 0xc4, 0x99, 0xad, 0x0d, 0x26, 0xb8, 0x70, 0xea, 0x5b,
+    0x74, 0x35, 0x6a, 0xfa, 0xac, 0x97, 0xd8, 0x4c, 0x08, 0x6d, 0xc1, 0xfe, 0x60, 0xe4, 0xd4, 0x8f, 0x93, 0xd4, 0xaf,
+    0xa2, 0xec, 0xb8, 0x71, 0xf6, 0xcb, 0x3f, 0xdc, 0x3e, 0x42, 0xca, 0xe2, 0x8d, 0xb9, 0x0a, 0x2c, 0xef, 0xb6, 0x18,
+    0x75, 0x46, 0x8a, 0x2b, 0x21, 0xeb, 0xc5, 0x12, 0x4d, 0xd7, 0xb8, 0x8e, 0x6c, 0xec, 0x9d, 0x12, 0xde, 0xa5, 0x45,
+    0xab, 0xc4, 0x26, 0x47, 0xfa, 0x57, 0xad, 0x78, 0x4c, 0x5e, 0x87, 0x0b, 0x42, 0x6a, 0xbe, 0xef, 0xbd, 0xbc, 0xe5,
+    0xd7, 0x4c, 0x3a, 0x0f, 0x96, 0x29, 0xcb, 0x45, 0x46, 0x3f, 0x8a, 0x31, 0xda, 0x8d, 0x7f, 0x89, 0xa4, 0xd6, 0xb4,
+    0xe5, 0x99, 0x27, 0xa7, 0xab, 0x15, 0x82, 0x75, 0x3e, 0xc0, 0x9d, 0xae, 0x8c, 0x7f, 0x19, 0x80, 0xf5, 0xa6, 0x89,
+    0xbc, 0xb7, 0x36, 0x50, 0x1f, 0x63, 0xca, 0x40, 0x3e, 0xe1, 0x4c, 0x2d, 0x1e, 0x15, 0x51, 0x93, 0xf2, 0x1a, 0x97,
+    0x3e, 0xad, 0x5e, 0xba, 0xe2, 0xd6, 0xa7, 0x7c, 0x51, 0x45, 0xdf, 0x92, 0xbe, 0x35, 0xf3, 0xb4, 0xe8, 0x5c, 0x2e,
+    0x6a, 0x5c, 0xda, 0xe8, 0xf7, 0x51, 0xdc, 0xcb, 0x06, 0xd2, 0xd2, 0xa4, 0x7c, 0x7d, 0x5f, 0x20, 0xb8, 0x50, 0x04,
+    0xb5, 0xb1, 0x9a, 0x4e, 0xc9, 0x94, 0xe4, 0x40, 0x2b, 0x85, 0xc8, 0xd3, 0x71, 0xfa, 0x83, 0x81, 0x28, 0x53, 0xef,
+    0xa0, 0xb0, 0xf0, 0xc8, 0xb9, 0x52, 0xb2, 0x0f, 0x8c, 0x49, 0x93, 0xeb, 0x2a, 0x95, 0x83, 0x4f, 0x47, 0xe8, 0x0c,
+    0x83, 0x7b, 0x88, 0x18, 0x63, 0xa9, 0x87, 0x7f, 0xe3, 0x57, 0xa6, 0x57, 0xdd, 0x6d, 0x2a, 0x85, 0xe9, 0x79, 0x16,
+    0x3b, 0x07, 0x59, 0x4f, 0xed, 0x9a, 0x17, 0xe7, 0xcd, 0x35, 0xa6, 0x9b, 0x06, 0x1d, 0x18, 0x5e, 0xb2, 0x9b, 0xac,
+    0x18, 0xc6, 0x5b, 0xec, 0xbe, 0x29, 0xa3, 0x57, 0xc2, 0x6b, 0x3f, 0x11, 0x89, 0xd1, 0x57, 0xe4, 0xb8, 0xaf, 0x11,
+    0xba, 0x90, 0x93, 0x4f, 0x5e, 0x0c, 0x6b, 0x9f, 0x61, 0x5c, 0xdd, 0xb6, 0xcf, 0x18, 0xcc, 0x9a, 0x95, 0x32, 0x5f,
+    0x6f, 0xf1, 0x43, 0x17, 0x2d, 0xbc, 0x70, 0xbe, 0xd4, 0x76, 0x38, 0x42, 0xcc, 0xdd, 0xf0, 0xff, 0x5b, 0xe8, 0x19,
+    0xc9, 0xf4, 0x25, 0xda, 0xdb, 0x5f, 0xd2, 0x3c, 0xf3, 0xe0, 0xed, 0xb0, 0xa2, 0x4c, 0xdf, 0x05, 0xf2, 0x0c, 0xc4,
+    0x21, 0xb9, 0xc4, 0x02, 0xd2, 0x1e, 0x46, 0x2c, 0x57, 0x78, 0xb0, 0xf1, 0x85, 0x33, 0x51, 0xc5, 0x3e, 0xce, 0x69,
+    0x68, 0x77, 0x3e, 0xb4, 0x5a, 0x4e, 0x43, 0x89, 0x85, 0x71, 0x36, 0x84, 0x56, 0x5c, 0x6b, 0xce, 0x78, 0x4e, 0x86,
+    0x6a, 0x5f, 0xf1, 0x2d, 0x73, 0x4c, 0xba, 0xc1, 0x5e, 0x2b, 0x6e, 0x0d, 0xdd, 0x45, 0x1d, 0x92, 0xb4, 0x31, 0xd9,
+    0xce, 0x0b, 0x58, 0x67, 0xc1, 0xa6, 0x47, 0x2e, 0x5e, 0x6d, 0x6d, 0xa3, 0x78, 0xed, 0xc5, 0xcb, 0xac, 0x20, 0xb8,
+    0x6a, 0x14, 0x32, 0x55, 0xe8, 0xfb, 0xe0, 0xee, 0x31, 0xfc, 0x47, 0x33, 0xf6, 0xe7, 0x54, 0xd1, 0x61, 0x91, 0x74,
+    0x90, 0xfa, 0x44, 0x0a, 0xc8, 0xaf, 0xa2, 0xdb, 0x2c, 0x83, 0xda, 0xe8, 0xd0, 0xb7, 0x34, 0x8a, 0xc8, 0xbb, 0x86,
+    0x58, 0x82, 0x1a, 0x2f, 0xd6, 0xc5, 0x92, 0xe9, 0xd0, 0x21, 0x11, 0xf6, 0xeb, 0x9b, 0xed, 0xbf, 0xa9, 0x71, 0x89,
+    0xb2, 0x59, 0x76, 0xb3, 0xeb, 0x9c, 0xe1, 0x73, 0x79, 0x7b, 0x11, 0x3d, 0x4e, 0x33, 0xca, 0xf6, 0x7e, 0xd8, 0xcf,
+    0x06, 0x41, 0x39, 0xef, 0x78, 0x5a, 0x89, 0x69, 0x0c, 0xff, 0xda, 0x31, 0x16, 0x32, 0xd4, 0xe5, 0x2d, 0x8b, 0x22,
+    0xb9, 0x82, 0x38, 0xd8, 0x22, 0xfc, 0xe8, 0xbd, 0xbf, 0x0d, 0x4b, 0xc9, 0x0d, 0x74, 0x5e, 0x2d, 0xb2, 0x1f, 0x23,
+    0xa8, 0xf8, 0xa7, 0x27, 0xe1, 0x02, 0x61, 0x83, 0xc4, 0xd0, 0x63, 0x0e, 0x23, 0xf2, 0x34, 0x06, 0x69, 0xd1, 0xa3,
+    0xa2, 0x76, 0x76, 0x94, 0xbc, 0x1f, 0x78, 0x73, 0x5a, 0x48, 0x82, 0xb4, 0x68, 0x3d, 0x24, 0x52, 0xe8, 0x92, 0x4e,
+    0x58, 0xdf, 0x55, 0x3f, 0xa8, 0x48, 0x59, 0x35, 0x90, 0x9b, 0x55, 0xc9, 0xdc, 0xff, 0xcc, 0x22, 0x7c, 0xd1, 0x29,
+    0xe0, 0xd5, 0xd8, 0x31, 0x3d, 0x9b, 0xae, 0x38, 0x52, 0x2a, 0xa1, 0xc5, 0x86, 0x19, 0x93, 0xe7, 0x2d, 0x9b, 0xa9,
+    0x09, 0xbf, 0xdd, 0x89, 0x43, 0x35, 0xb2, 0x6f, 0x91, 0xba, 0x28, 0xfa, 0x2f, 0x2c, 0xab, 0xe8, 0x58, 0xe6, 0x4c,
+    0xbf, 0xd5, 0xaf, 0x49, 0xcd, 0x7f, 0x18, 0xa4, 0x69, 0xd3, 0xff, 0x99, 0xad, 0x9d, 0xb0, 0x93, 0x3b, 0x04, 0x01,
+    0xd5, 0x7d, 0x33, 0xe0, 0x66, 0xe2, 0xd4, 0xeb, 0xae, 0xcd, 0x7f, 0x66, 0xf2, 0x2c, 0xa7, 0xfe, 0x7d, 0x51, 0x8b,
+    0x2a, 0x25, 0xa8, 0x90, 0xb2, 0x71, 0xe5, 0x98, 0x40, 0xb8, 0xe9, 0x1f, 0x64, 0xd9, 0x90, 0xf2, 0x39, 0x25, 0x6f,
+    0x58, 0x35, 0x9e, 0x40, 0x25, 0x92, 0xbb, 0xa2, 0x4d, 0x45, 0xf6, 0xc3, 0x1a, 0xc6, 0xc0, 0xf6, 0xc2, 0x9b, 0x2b,
+    0xb5, 0xc7, 0xe9, 0xc8, 0x75, 0x03, 0x71, 0x1c, 0x76, 0x0e, 0xde, 0x5c, 0xe7, 0xf4, 0x91, 0xc4, 0x1d, 0x9f, 0xcb,
+    0x67, 0x1c, 0x1b, 0xc9, 0x25, 0x6d, 0x95, 0x05, 0xd7, 0x3b, 0xbf, 0x2d, 0x90, 0x96, 0xc3, 0x44, 0xa3, 0x0a, 0xee,
+    0x7a, 0x4c, 0x7e, 0x7f, 0xc2, 0x4e, 0x4f, 0x38, 0x88, 0xe9, 0x9f, 0x93, 0xd8, 0xd1, 0x10, 0x8c, 0x85, 0x89, 0xb2,
+    0xd0, 0x95, 0xc3, 0xe4, 0xd2, 0x8f, 0x2b, 0x0c, 0x82, 0xbd, 0x25, 0x74, 0x39, 0xe7, 0x3e, 0xef, 0xd2, 0x2f, 0x6f,
+    0xdc, 0xe0, 0x75, 0x6b, 0xf2, 0x66, 0x7d, 0x65, 0x18, 0x26, 0xb0, 0x7a, 0x7a, 0x45, 0xf0, 0xf2, 0xc4, 0xbe, 0x70,
+    0x6e, 0x58, 0x3a, 0x54, 0x31, 0x64, 0xf6, 0x49, 0xb5, 0xdc, 0x1c, 0x9e, 0x87, 0xdb, 0x6a, 0x92, 0x2a, 0x59, 0x73,
+    0x35, 0x4d, 0x59, 0xed, 0xd0, 0x8a, 0xd9, 0xac, 0xea, 0x7c, 0xc0, 0x0a, 0xfe, 0x8f, 0x29, 0xb7, 0xda, 0xdc, 0x8a,
+    0x55, 0x0f, 0x61, 0xc0, 0x82, 0x49, 0x4c, 0xc2, 0x51, 0x4b, 0x41, 0x7d, 0x1f, 0xf1, 0x07, 0x13, 0x23, 0x16, 0xe4,
+    0x88, 0x76, 0x38, 0x92, 0xbd, 0x3d, 0xe2, 0x7b, 0xab, 0x1c, 0x53, 0x35, 0xfb, 0x85, 0x76, 0x35, 0xf7, 0xfc, 0xdc,
+    0x3e, 0xc9, 0xae, 0x6a, 0x7c, 0x10, 0x44, 0xa5, 0xfb, 0xc4, 0x81, 0x9a, 0x6d, 0x9b, 0xf2, 0x87, 0x0a, 0x9e, 0xcd,
+    0x75, 0xc2, 0xd5, 0xe7, 0x0b, 0xcd, 0x5c, 0x6e, 0xf2, 0x51, 0x96, 0xa3, 0xe8, 0xd5, 0x5a, 0x17, 0xf5, 0x1a, 0x28,
+    0xff, 0xc8, 0xf0, 0xfc, 0x7e, 0x3b, 0xd3, 0xf3, 0x12, 0x61, 0xe9, 0x02, 0xfa, 0x7b, 0x8e, 0x6b, 0x34, 0x4a, 0x5a,
+    0xb6, 0xb1, 0x71, 0x7d, 0xad, 0xbc, 0x88, 0x22, 0xf6, 0x14, 0xc5, 0x57, 0x1a, 0x0b, 0xb6, 0x8b, 0xbb, 0x9a, 0x09,
+    0xf2, 0xe8, 0x8d, 0x32, 0xd1, 0x54, 0xa9, 0xd2, 0x9f, 0xc5, 0xf4, 0x12, 0xad, 0xb3, 0xfd, 0x52, 0xb7, 0xff, 0x0e,
+    0x72, 0x59, 0xcb, 0x1d, 0x8d, 0xa4, 0xf2, 0x0f, 0x39, 0x8f, 0xc9, 0x84, 0xe0, 0x5c, 0xdd, 0x9c, 0xe4, 0x42, 0x4f,
+    0xf2, 0x09, 0x1e, 0x05, 0xcc, 0x41, 0xdd, 0xbd, 0xc1, 0xed, 0xdc, 0x8e, 0x64, 0xc3, 0x67, 0x51, 0xe5, 0x8a, 0x9a,
+    0x0d, 0x09, 0xb8, 0x4b, 0xa1, 0xb2, 0xdb, 0x01, 0xde, 0xf5, 0xd1, 0x51, 0xf7, 0x9d, 0x88, 0x59, 0xfd, 0xd5, 0x13,
+    0x0d, 0x05, 0xd5, 0x5e, 0xfa, 0x63, 0x26, 0x25, 0xad, 0x01, 0x83, 0x6f, 0xf3, 0x7f, 0x56, 0x11, 0x89, 0xaa, 0xdb,
+    0x49, 0xaa, 0x8f, 0x7d, 0x10, 0x99, 0xbf, 0x8b, 0xcf, 0xf4, 0xf8, 0xc2, 0x4e, 0x36, 0xa7, 0xb1, 0xfe, 0xc5, 0xf0,
+    0x07, 0xc3, 0x57, 0xe3, 0xbd, 0x1e, 0xa1, 0x56, 0x46, 0x32, 0x43, 0x8f, 0x8d, 0xc7, 0x73, 0x0a, 0xa5, 0x35, 0xa9,
+    0x93, 0x7c, 0x53, 0x3c, 0xf2, 0x58, 0xf3, 0x6a, 0x37, 0x41, 0xb4, 0xc7, 0x9d, 0xcd, 0xb1, 0x67, 0xb7, 0xaa, 0x5f,
+    0x25, 0xb9, 0xc5, 0xb6, 0xa2, 0xdb, 0xce, 0x34, 0x2c, 0xea, 0x93, 0x45, 0x6e, 0x7b, 0x6f, 0xb6, 0xf6, 0x89, 0x83,
+    0xd1, 0x9e, 0x08, 0x4b, 0x57, 0x4e, 0xd9, 0xf3, 0xe8, 0x81, 0x03, 0x5c, 0xd6, 0x6c, 0x2c, 0xea, 0x27, 0x2d, 0xfb,
+    0x39, 0xbb, 0x25, 0x81, 0xbb, 0x1a, 0xc3, 0xcb, 0xf5, 0x5e, 0x69, 0x1c, 0xa4, 0x8a, 0x0e, 0x4a, 0x69, 0xdf, 0xcd,
+    0x6c, 0xc7, 0xce, 0x48, 0xdb, 0x7a, 0x0b, 0xcb, 0x40, 0xc8, 0x59, 0x81, 0xde, 0x71, 0x3e, 0x0d, 0x41, 0xc9, 0xa2,
+    0x57, 0xae, 0xb7, 0x3f, 0x8b, 0x4e, 0x7c, 0xcb, 0xf9, 0xa5, 0xcb, 0xf8, 0xee, 0x52, 0xbe, 0x54, 0xa8, 0xef, 0x99,
+    0xb7, 0xa1, 0x0b, 0x77, 0xa2, 0xa7, 0x89, 0x47, 0x7f, 0x48, 0xaa, 0x02, 0x36, 0xbf, 0x9d, 0x97, 0xba, 0x43, 0x5e,
+    0x39, 0xa6, 0x99, 0x81, 0xde, 0xe4, 0x98, 0x06, 0x6a, 0xc8, 0x2c, 0x96, 0xf5, 0x51, 0x8c, 0x95, 0xd3, 0xe4, 0x2b,
+    0x94, 0x9a, 0x15, 0x71, 0x9f, 0xa4, 0x24, 0xfc, 0x92, 0x97, 0x18, 0xb7, 0x56, 0xe5, 0x59, 0xe1, 0x1a, 0x79, 0x3a,
+    0x47, 0x77, 0x92, 0xf5, 0x75, 0x42, 0xbd, 0x2d, 0x55, 0x05, 0xcf, 0xe8, 0xea, 0x64, 0x8b, 0xff, 0x30, 0xa1, 0x1e,
+    0x28, 0x2c, 0xa9, 0xaa, 0xd4, 0x19, 0x1d, 0x24, 0x7a, 0xcf, 0x5d, 0x39, 0xf2, 0xe3, 0xd2, 0xab, 0x26, 0x97, 0x35,
+    0xf6, 0x70, 0x8b, 0x09, 0x8b, 0x00, 0xb9, 0xb8, 0xa8, 0xb7, 0x78, 0xf1, 0x96, 0x03, 0xd2, 0x72, 0x46, 0x26, 0x82,
+    0x41, 0xce, 0xe3, 0x73, 0xb2, 0x31, 0x4f, 0x49, 0xc8, 0xa8, 0xcf, 0xcc, 0xb8, 0xcc, 0x5d, 0xab, 0xd1, 0x1e, 0xf5,
+    0x5a, 0x9a, 0x54, 0xaf, 0x15, 0xed, 0x5f, 0x96, 0x2b, 0x62, 0x0a, 0x4c, 0x67, 0x21, 0x98, 0xfd, 0x29, 0xf8, 0x12,
+    0x9d, 0xc2, 0x34, 0x4d, 0x70, 0x0e, 0x3b, 0x5e, 0xe3, 0x91, 0x58, 0x82, 0xa8, 0x9c, 0x7d, 0x11, 0xfb, 0x5d, 0x81,
+    0x0c, 0x0f, 0x9d, 0x84, 0xbb, 0xeb, 0x65, 0x1d, 0xeb, 0x6e, 0x18, 0x8e, 0x93, 0x70, 0xbb, 0x9d, 0xed, 0x58, 0xb2,
+    0x64, 0xf2, 0x7b, 0x8f, 0x05, 0xd8, 0xfa, 0x55, 0x50, 0xef, 0x7a, 0x49, 0x0d, 0xdf, 0xca, 0x63, 0xff, 0x41, 0x1d,
+    0x89, 0x79, 0xca, 0x8c, 0x1b, 0xbe, 0x75, 0x6f, 0x0e, 0x6b, 0x68, 0x8c, 0x5c, 0x93, 0xc8, 0xf3, 0x62, 0x0b, 0x68,
+    0xb1, 0x32, 0x2f, 0x1e, 0xda, 0xe5, 0x6d, 0x45, 0xaf, 0x3d, 0xa7, 0xaf, 0x81, 0x0f, 0xda, 0x82, 0x85, 0x94, 0x06,
+    0xc5, 0x3f, 0xf5, 0x73, 0x5f, 0xa4, 0x43, 0x5f, 0xb3, 0xac, 0x3d, 0x16, 0xe8, 0x6f, 0x84, 0xb3, 0xb6, 0x75, 0xf7,
+    0x13, 0x03, 0x46, 0x67, 0x87, 0x9a, 0xf1, 0x6c, 0x2e, 0x33, 0x33, 0x14, 0x85, 0x18, 0xe9, 0xd6, 0x1b, 0xee, 0x17,
+    0xe9, 0xe7, 0x6b, 0xd4, 0x46, 0xaf, 0x26, 0x55, 0x8d, 0xfc, 0x3a, 0xb4, 0x61, 0x1a, 0x9e, 0x2d, 0x85, 0xa2, 0x86,
+    0x8c, 0x92, 0xbd, 0x8d, 0x0e, 0x4b, 0x4e, 0x0d, 0xdf, 0x4a, 0xc6, 0x66, 0xcd, 0x28, 0xff, 0xc4, 0x44, 0xba, 0x39,
+    0x4a, 0x04, 0x43, 0xce, 0x95, 0x47, 0x99, 0x8c, 0x9b, 0xb7, 0x72, 0x48, 0xdd, 0x9b, 0x98, 0x4f, 0xd5, 0x18, 0x81,
+    0xb4, 0xef, 0xfa, 0x96, 0x54, 0x9b, 0xda, 0x73, 0xe2, 0xe0, 0x27, 0x2f, 0x10, 0x0f, 0xf9, 0x0e, 0x24, 0xb4, 0xd2,
+    0x39, 0xf7, 0x49, 0x8c, 0x5c, 0x05, 0x37, 0xdd, 0xa7, 0x73, 0xac, 0x16, 0x85, 0x71, 0x46, 0xd1, 0x6f, 0x7a, 0x25,
+    0xd2, 0x5c, 0x4e, 0x70, 0x26, 0x93, 0x36, 0x22, 0x5f, 0xe5, 0x42, 0x4e, 0x89, 0xf2, 0x4c, 0x55, 0x9b, 0xd1, 0xa5,
+    0xaf, 0x87, 0xd8, 0x7e, 0xe8, 0xdd, 0xb9, 0x47, 0xb3, 0xda, 0xf7, 0x98, 0x52, 0x73, 0x8b, 0x3c, 0x0b, 0xe7, 0xfa,
+    0x14, 0x7f, 0x9a, 0xa6, 0x8e, 0xf4, 0x7c, 0xad, 0x58, 0x11, 0x73, 0xe3, 0x3a, 0x56, 0x47, 0x9b, 0x95, 0x24, 0x68,
+    0x35, 0xa9, 0xd9, 0x6e, 0x5c, 0x4d, 0xe8, 0xa4, 0xb8, 0x80, 0x0b, 0x73, 0xc4, 0x0f, 0x87, 0x0c, 0xa1, 0xf4, 0x5a,
+    0x3c, 0xce, 0x3f, 0x30, 0x3d, 0xb5, 0xc1, 0x0b, 0x43, 0x2a, 0xb1, 0xbe, 0x6b, 0x12, 0xc4, 0x4b, 0xdb, 0xcb, 0x2f,
+    0x77, 0x8a, 0x3a, 0xba, 0xf4, 0xa3, 0x9b, 0x05, 0xee, 0x98, 0x50, 0x77, 0xfe, 0x82, 0x5b, 0x29, 0x6d, 0x7c, 0x0c,
+    0x4b, 0x41, 0xa2, 0x6a, 0xb2, 0x27, 0x32, 0xf1, 0x0c, 0x1d, 0xd7, 0x6c, 0x02, 0x4d, 0xbd, 0xf2, 0x5a, 0x66, 0xd3,
+    0xb5, 0x30, 0xab, 0x4b, 0x7e, 0x72, 0x77, 0x30, 0x42, 0xd7, 0x70, 0x05, 0x9f, 0xeb, 0x2f, 0x22, 0x7f, 0x49, 0x2d,
+    0x5d, 0xcf, 0x4b, 0x84, 0x0c, 0xa5, 0xb9, 0xe5, 0x49, 0xae, 0x54, 0x2c, 0x86, 0x53, 0x4c, 0x9c, 0x42, 0x29, 0x78,
+    0xf0, 0x0a, 0x8a, 0x36, 0x53, 0x4d, 0x2b, 0xc9, 0xe2, 0x69, 0x0e, 0x9a, 0x37, 0x0c, 0x91, 0x2d, 0xac, 0x2f, 0x43,
+    0x6a, 0xf1, 0xe9, 0xfb, 0xb4, 0x68, 0xec, 0x90, 0x00, 0xff, 0x32, 0xf8, 0x58, 0xab, 0xd1, 0x73, 0x9f, 0x77, 0x72,
+    0x22, 0xed, 0x64, 0xac, 0x7d, 0xd0, 0xa8, 0x1f, 0x01, 0x99, 0x9f, 0xfd, 0xa6, 0xcb, 0x62, 0xca, 0x65, 0xd8, 0xf8,
+    0x31, 0xf0, 0xc1, 0x5e, 0xef, 0xf1, 0x4d, 0x79, 0xa9, 0xfc, 0x8f, 0x57, 0xcb, 0xc1, 0xb7, 0x03, 0x30, 0xbb, 0xad,
+    0xdb, 0x88, 0xf7, 0xcc, 0xa1, 0x25, 0xfd, 0x37, 0x03, 0xc5, 0xdb, 0x7f, 0xb4, 0xe0, 0xe6, 0xa3, 0x7e, 0xa4, 0x52,
+    0x68, 0xa7, 0x2e, 0xe6, 0x1c, 0xea, 0x91, 0x48, 0x67, 0xbd, 0x3d, 0x6d, 0xcc, 0x09, 0x49, 0x17, 0x50, 0x16, 0xb5,
+    0x65, 0x63, 0xd4, 0x84, 0x2c, 0x3a, 0x5f, 0x6a, 0x3c, 0x66, 0xfa, 0x24, 0xaf, 0xd1, 0xfd, 0x18, 0x66, 0xe4, 0xe8,
+    0x3c, 0x6c, 0x74, 0xb6, 0xc5, 0x4c, 0xf8, 0xa8, 0x15, 0x3c, 0xd0, 0xb8, 0x4a, 0x53, 0x15, 0x4b, 0x1e, 0x56, 0x7f,
+    0xd8, 0x40, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0xfe, 0xe7, 0xdc, 0x03, 0xd1, 0x0f, 0xfd, 0x7c, 0xdc, 0xa1, 0x7e, 0x41, 0x2e, 0x50, 0x37, 0x77, 0x94, 0xb7, 0x4b,
+    0x90, 0x3b, 0x14, 0x38, 0xe0, 0x80, 0x03, 0x0e, 0x38, 0xe0, 0x80, 0xfb, 0xff, 0xba, 0xff, 0x00,
+};
+
+static const uint8_t STORED[] = {
+    0x01, 0x2c, 0x01, 0xd3, 0xfe, 0x65, 0x73, 0x70, 0x68, 0x6f, 0x6d, 0x65, 0x20, 0x6f, 0x74, 0x61, 0x20, 0x64,
+    0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x65, 0x73, 0x70, 0x68, 0x6f, 0x6d, 0x65, 0x20, 0x6f, 0x74, 0x61,
+    0x20, 0x64, 0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x65, 0x73, 0x70, 0x68, 0x6f, 0x6d, 0x65, 0x20, 0x6f,
+    0x74, 0x61, 0x20, 0x64, 0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x65, 0x73, 0x70, 0x68, 0x6f, 0x6d, 0x65,
+    0x20, 0x6f, 0x74, 0x61, 0x20, 0x64, 0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x65, 0x73, 0x70, 0x68, 0x6f,
+    0x6d, 0x65, 0x20, 0x6f, 0x74, 0x61, 0x20, 0x64, 0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x65, 0x73, 0x70,
+    0x68, 0x6f, 0x6d, 0x65, 0x20, 0x6f, 0x74, 0x61, 0x20, 0x64, 0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x65,
+    0x73, 0x70, 0x68, 0x6f, 0x6d, 0x65, 0x20, 0x6f, 0x74, 0x61, 0x20, 0x64, 0x65, 0x66, 0x6c, 0x61, 0x74, 0x65,
+    0x20, 0x65, 0x73, 0x70, 0x68, 0x6f, 0x6d, 0x65, 0x20, 0x6f, 0x74, 0x61, 0x20, 0x64, 0x65, 0x66, 0x6c, 0x61,
+    0x74, 0x65, 0x20, 0x65, 0x73, 0x70, 0x68, 0x6f, 0x6d, 0x65, 0x20, 0x6f, 0x74, 0x61, 0x20, 0x64, 0x65, 0x66,
+    0x6c, 0x61, 0x74, 0x65, 0x20, 0x65, 0x73, 0x70, 0x68, 0x6f, 0x6d, 0x65, 0x20, 0x6f, 0x74, 0x61, 0x20, 0x64,
+    0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x65, 0x73, 0x70, 0x68, 0x6f, 0x6d, 0x65, 0x20, 0x6f, 0x74, 0x61,
+    0x20, 0x64, 0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x65, 0x73, 0x70, 0x68, 0x6f, 0x6d, 0x65, 0x20, 0x6f,
+    0x74, 0x61, 0x20, 0x64, 0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x65, 0x73, 0x70, 0x68, 0x6f, 0x6d, 0x65,
+    0x20, 0x6f, 0x74, 0x61, 0x20, 0x64, 0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x65, 0x73, 0x70, 0x68, 0x6f,
+    0x6d, 0x65, 0x20, 0x6f, 0x74, 0x61, 0x20, 0x64, 0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x65, 0x73, 0x70,
+    0x68, 0x6f, 0x6d, 0x65, 0x20, 0x6f, 0x74, 0x61, 0x20, 0x64, 0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x20,
+};
+
+static constexpr size_t WINDOW = 4096;
+static constexpr size_t PLAIN_SIZE = 16000;
+
+static uint8_t lcg_next(uint32_t &x) {
+  x = (x * 1103515245u + 12345u) & 0x7fffffffu;
+  return (x >> 16) & 0xff;
+}
+
+static std::vector<uint8_t> build_plain() {
+  std::vector<uint8_t> plain;
+  const char *text = "esphome ota deflate ";
+  for (int i = 0; i < 300; i++)
+    plain.insert(plain.end(), text, text + strlen(text));
+  uint32_t x = 1;
+  for (int i = 0; i < 3000; i++)
+    plain.push_back(lcg_next(x));
+  plain.insert(plain.end(), 5000, 0);
+  for (int i = 0; i < 100; i++)
+    plain.insert(plain.end(), text, text + strlen(text));
+  return plain;
+}
+
+// Mirrors the OTA session: chunked input through the read callback, window as output
+struct Session : OtaInflateState {
+  const uint8_t *in;
+  size_t in_len;
+  size_t in_pos;
+  size_t chunk;
+  std::vector<uint8_t> out;
+  uint8_t window[WINDOW];
+};
+
+static int read_cb(OtaInflateState *d) {
+  auto *s = static_cast<Session *>(d);
+  if (s->in_pos >= s->in_len)
+    return -1;
+  size_t n = std::min(s->chunk, s->in_len - s->in_pos);
+  d->source = s->in + s->in_pos + 1;
+  d->source_limit = s->in + s->in_pos + n;
+  s->in_pos += n;
+  return s->in[s->in_pos - n];
+}
+
+// Inflates the whole input; returns the decoder result and fills s.out
+static int inflate_all(Session &s, const uint8_t *in, size_t in_len, size_t chunk) {
+  s.in = in;
+  s.in_len = in_len;
+  s.in_pos = 0;
+  s.chunk = chunk;
+  s.out.clear();
+  memset(s.window, 0, sizeof(s.window));
+  ota_inflate_init(&s, s.window, WINDOW);
+  s.source_read_cb = read_cb;
+  int res;
+  do {
+    s.dest = s.window;
+    s.dest_limit = s.window + WINDOW;
+    res = ota_inflate(&s);
+    if (res < 0 || s.eof)
+      return res < 0 ? res : OTA_INFLATE_DATA_ERROR;
+    s.out.insert(s.out.end(), s.window, s.dest);
+    if (s.out.size() > PLAIN_SIZE)
+      return OTA_INFLATE_DATA_ERROR;
+  } while (res != OTA_INFLATE_DONE);
+  return res;
+}
+
+TEST(OtaInflate, RoundTripThroughWindow) {
+  auto s = std::make_unique<Session>();
+  ASSERT_EQ(inflate_all(*s, DEFLATED, sizeof(DEFLATED), 1040), OTA_INFLATE_DONE);
+  EXPECT_EQ(s->out, build_plain());
+  EXPECT_EQ(s->in_pos, sizeof(DEFLATED));
+}
+
+TEST(OtaInflate, SmallReadChunks) {
+  auto s = std::make_unique<Session>();
+  ASSERT_EQ(inflate_all(*s, DEFLATED, sizeof(DEFLATED), 7), OTA_INFLATE_DONE);
+  EXPECT_EQ(s->out, build_plain());
+}
+
+TEST(OtaInflate, StoredBlock) {
+  auto s = std::make_unique<Session>();
+  ASSERT_EQ(inflate_all(*s, STORED, sizeof(STORED), 64), OTA_INFLATE_DONE);
+  auto plain = build_plain();
+  plain.resize(300);
+  EXPECT_EQ(s->out, plain);
+}
+
+TEST(OtaInflate, TruncatedStreamFails) {
+  auto s = std::make_unique<Session>();
+  for (size_t cut : {size_t{1}, size_t{100}, size_t{1000}, sizeof(DEFLATED) - 1}) {
+    EXPECT_LT(inflate_all(*s, DEFLATED, cut, 1040), 0) << "cut at " << cut;
+    EXPECT_LE(s->out.size(), PLAIN_SIZE);
+  }
+}
+
+TEST(OtaInflate, TruncatedStoredBlockFails) {
+  auto s = std::make_unique<Session>();
+  EXPECT_LT(inflate_all(*s, STORED, sizeof(STORED) - 50, 64), 0);
+}
+
+TEST(OtaInflate, CorruptStreamsNeverEscapeTheWindow) {
+  // Flipped bytes and garbage; the sanitizers check the decoder stays in bounds
+  auto s = std::make_unique<Session>();
+  std::vector<uint8_t> bad(DEFLATED, DEFLATED + sizeof(DEFLATED));
+  // A coarse, non-aligned stride: neighbouring offsets hit the same paths
+  for (size_t i = 0; i < bad.size(); i += 29) {
+    bad[i] ^= 0x5a;
+    inflate_all(*s, bad.data(), bad.size(), 1040);
+    bad[i] ^= 0x5a;
+  }
+  uint32_t x = 99;
+  std::vector<uint8_t> garbage(2000);
+  for (int round = 0; round < 50; round++) {
+    for (auto &b : garbage)
+      b = lcg_next(x);
+    inflate_all(*s, garbage.data(), garbage.size(), 1040);
+  }
+}
+
+}  // namespace esphome::testing

tests/components/ota/test.bk72xx-ard.yaml

@@ -0,0 +1 @@
+<<: !include common.yaml

tests/components/ota/test_backend_contract.cpp

@@ -14,7 +14,7 @@ struct MinimalBackend {
   OTAResponseTypes write(uint8_t *data, size_t len) { return OTA_RESPONSE_OK; }
   OTAResponseTypes end() { return OTA_RESPONSE_OK; }
   void abort() {}
-  bool supports_compression() { return false; }
+  static constexpr bool supports_compression() { return false; }
 };
 static_assert(OTABackendContract<MinimalBackend>);
 

tests/components/tuya/test-no-network.bk72xx-ard.yaml

@@ -0,0 +1,29 @@
+# Tuya without any network component (no wifi/ethernet/api), as used on
+# serial-only or BLE-only Tuya MCU boards. Regression test for
+# https://github.com/esphome/esphome/issues/18942
+substitutions:
+  status_pin: P6
+
+packages:
+  uart: !include ../../test_build_components/common/uart/bk72xx-ard.yaml
+
+tuya:
+  status_pin: ${status_pin}
+
+binary_sensor:
+  - platform: tuya
+    id: tuya_presence
+    sensor_datapoint: 101
+
+sensor:
+  - platform: tuya
+    id: tuya_light_intensity
+    sensor_datapoint: 103
+
+number:
+  - platform: tuya
+    id: tuya_far_detection
+    number_datapoint: 109
+    min_value: 0
+    max_value: 600
+    step: 1

tests/integration/README.md

@@ -21,6 +21,13 @@ The `yaml_config` fixture automatically loads YAML configurations based on the t
 - The fixture file must exist or the test will fail with a clear error message
 - The fixture automatically injects a dynamic port number into the API configuration
 
+Tests marked `@pytest.mark.shared_yaml("name")` load `fixtures/name.yaml` instead
+of the test-named file and compile it in a shared, hash-keyed build directory, so
+the whole group pays one full compile and each test only a relink. The marker
+argument must be a single-line string literal (CI test selection maps fixtures to
+test files by scanning for it), and marked tests must hand the `yaml_config`
+content to `run_compiled` unmodified.
+
 ### Key Fixtures
 
 - `run_compiled` - Combines write, compile, and run operations into a single context manager

tests/integration/conftest.py

@@ -4,17 +4,22 @@ from __future__ import annotations
 
 import asyncio
 from collections.abc import AsyncGenerator, Callable, Generator
-from contextlib import AbstractAsyncContextManager, asynccontextmanager
+from contextlib import AbstractAsyncContextManager, asynccontextmanager, suppress
 import fcntl
+from functools import cache
+import hashlib
 import logging
 import os
 from pathlib import Path
 import platform
+import re
+import shutil
 import signal
 import socket
 import subprocess
 import sys
 import tempfile
+import time
 from typing import TextIO
 
 from aioesphomeapi import APIClient, APIConnectionError, LogParser, ReconnectLogic
@@ -23,7 +28,13 @@ import pytest_asyncio
 
 import esphome.config
 from esphome.core import CORE
-from esphome.helpers import get_usable_cpu_count
+from esphome.helpers import (
+    get_usable_cpu_count,
+    read_file,
+    rmtree,
+    write_file,
+    write_file_if_changed,
+)
 from esphome.platformio.toolchain import get_idedata
 
 from .const import (
@@ -56,6 +67,21 @@ import pty  # not available on Windows
 pytest.register_assert_rewrite("tests.integration.entity_utils")
 
 
+def pytest_configure(config: pytest.Config) -> None:
+    config.addinivalue_line(
+        "markers",
+        "shared_yaml(name): load fixtures/<name>.yaml and compile it in a shared, "
+        "hash-keyed incremental build directory",
+    )
+
+
+FIXTURES_DIR = Path(__file__).parent / "fixtures"
+REPO_ROOT = Path(__file__).resolve().parent.parent.parent
+
+# CI caches parts of this path; keep in sync with ci.yml integration-tests.
+INTEGRATION_TESTS_ROOT = Path.home() / ".esphome-integration-tests"
+
+
 def _get_platformio_env(cache_dir: Path) -> dict[str, str]:
     """Get environment variables for PlatformIO with shared cache."""
     env = os.environ.copy()
@@ -78,7 +104,7 @@ def _get_platformio_env(cache_dir: Path) -> dict[str, str]:
         )
     # Compile with THIS tree's esphome sources, not wherever the venv's editable
     # install points (which may be a different git worktree or checkout).
-    repo_root = str(Path(__file__).resolve().parent.parent.parent)
+    repo_root = str(REPO_ROOT)
     existing = env.get("PYTHONPATH")
     env["PYTHONPATH"] = f"{repo_root}{os.pathsep}{existing}" if existing else repo_root
     return env
@@ -88,8 +114,7 @@ def _get_platformio_env(cache_dir: Path) -> dict[str, str]:
 def shared_platformio_cache() -> Generator[Path]:
     """Initialize a shared PlatformIO cache for all integration tests."""
     # Use a dedicated directory for integration tests to avoid conflicts.
-    # CI caches parts of this path; keep in sync with ci.yml integration-tests.
+    test_cache_dir = INTEGRATION_TESTS_ROOT
-    test_cache_dir = Path.home() / ".esphome-integration-tests"
     cache_dir = test_cache_dir / "platformio"
 
     # Use a lock file in the home directory to ensure only one process initializes the cache
@@ -112,7 +137,9 @@ def shared_platformio_cache() -> Generator[Path]:
                 init_dir = Path(tmpdir)
                 fixture_path = Path(__file__).parent / "fixtures" / "cache_init.yaml"
                 config_path = init_dir / "cache_init.yaml"
-                config_path.write_text(fixture_path.read_text())
+                config_path.write_text(
+                    fixture_path.read_text(encoding="utf-8"), encoding="utf-8"
+                )
 
                 # Run compilation to populate the cache
                 # We must succeed here to avoid race conditions where multiple
@@ -162,13 +189,6 @@ def integration_test_dir() -> Generator[Path]:
         yield Path(tmpdir)
 
 
-@pytest.fixture
-def isolated_preferences(monkeypatch: pytest.MonkeyPatch, tmp_path: Path) -> None:
-    """Host preferences persist per device name; give the test its own so a
-    provisioned key never leaks into another run."""
-    monkeypatch.setenv("ESPHOME_PREFDIR", str(tmp_path / "prefs"))
-
-
 @pytest.fixture
 def reserved_tcp_port() -> Generator[tuple[int, socket.socket]]:
     """Reserve an unused TCP port by holding the socket open."""
@@ -188,21 +208,29 @@ def unused_tcp_port(reserved_tcp_port: tuple[int, socket.socket]) -> int:
     return reserved_tcp_port[0]
 
 
+@pytest.fixture(autouse=True)
+def isolated_preferences(monkeypatch: pytest.MonkeyPatch, tmp_path: Path) -> Path:
+    """Give every test its own host prefs dir; prefs are keyed only by device
+    name, which tests sharing a fixture also share."""
+    prefdir = tmp_path / "prefs"
+    monkeypatch.setenv("ESPHOME_PREFDIR", str(prefdir))
+    return prefdir
+
+
 @pytest_asyncio.fixture
 async def yaml_config(request: pytest.FixtureRequest, unused_tcp_port: int) -> str:
     """Load YAML configuration based on test name."""
-    # Get the test function name
+    shared_name = _shared_yaml_name(request)
-    test_name: str = request.node.name
+    # Base test name: test_ prefix and any parametrization stripped
-    # Extract the base test name (remove test_ prefix and any parametrization)
+    base_name = shared_name or request.node.name.replace("test_", "").partition("[")[0]
-    base_name = test_name.replace("test_", "").partition("[")[0]
 
     # Load the fixture file
-    fixture_path = Path(__file__).parent / "fixtures" / f"{base_name}.yaml"
+    fixture_path = FIXTURES_DIR / f"{base_name}.yaml"
     if not fixture_path.exists():
         raise FileNotFoundError(f"Fixture file not found: {fixture_path}")
 
     loop = asyncio.get_running_loop()
-    content = await loop.run_in_executor(None, fixture_path.read_text)
+    content = await loop.run_in_executor(None, read_file, fixture_path)
 
     # Replace the port in the config if it contains api section
     if "api:" in content:
@@ -226,11 +254,13 @@ async def yaml_config(request: pytest.FixtureRequest, unused_tcp_port: int) -> s
 
     # Replace external component path placeholder if present
     if "EXTERNAL_COMPONENT_PATH" in content:
-        external_components_path = str(
+        external_components_path = str(FIXTURES_DIR / "external_components")
-            Path(__file__).parent / "fixtures" / "external_components"
-        )
         content = content.replace("EXTERNAL_COMPONENT_PATH", external_components_path)
 
+    if shared_name is not None:
+        # _compile verifies the marked test compiles this content unmodified
+        request.node._shared_yaml_content = content
+
     return content
 
 
@@ -240,24 +270,218 @@ async def write_yaml_config(
 ) -> AsyncGenerator[ConfigWriter]:
     """Write YAML configuration to a file."""
     # Get the test name for default filename
-    test_name = request.node.name
+    base_name = request.node.name.replace("test_", "").partition("[")[0]
-    base_name = test_name.replace("test_", "").split("[")[0]
 
     async def _write_config(content: str, filename: str | None = None) -> Path:
         if filename is None:
             filename = f"{base_name}.yaml"
         config_path = integration_test_dir / filename
         loop = asyncio.get_running_loop()
-        await loop.run_in_executor(None, config_path.write_text, content)
+        await loop.run_in_executor(None, write_file, config_path, content)
         return config_path
 
     yield _write_config
 
 
+# Deliberately not CI-cached (ci.yml caches only platformio/ subpaths); stale
+# dirs for a fixture are pruned when its content hash changes.
+SHARED_BUILDS_ROOT = INTEGRATION_TESTS_ROOT / "builds"
+
+# In the dir name (not just the hash) so pruning stays inside this checkout
+_REPO_KEY = hashlib.sha256(str(REPO_ROOT).encode()).hexdigest()[:8]
+
+# Give a contended shared build lock time for a full cold compile ahead of us
+_SHARED_LOCK_TIMEOUT_S = 900
+_SHARED_LOCK_POLL_S = 0.1
+_SHARED_LOCK_REPORT_S = 30
+
+# Reclaims dirs orphaned by fixture renames or deleted checkouts
+_STALE_BUILD_MAX_AGE_S = 30 * 24 * 3600
+
+# ELF path per shared build dir; constant once compiled, so resolve it only once
+_shared_elf_paths: dict[Path, Path] = {}
+
+# Dirs this process already swept; pruning is session-scoped work
+_pruned_dirs: set[Path] = set()
+
+
+def _shared_yaml_name(request: pytest.FixtureRequest) -> str | None:
+    """Name passed to the shared_yaml marker, or None when unmarked."""
+    marker = request.node.get_closest_marker("shared_yaml")
+    if marker is None:
+        return None
+    # Exactly one \w+ positional arg: the name doubles as a build dir
+    # component, and CI test selection (script/helpers.py) parses the same shape
+    if (
+        len(marker.args) != 1
+        or marker.kwargs
+        or not re.fullmatch(r"\w+", str(marker.args[0]))
+    ):
+        raise ValueError(
+            "shared_yaml marker requires exactly one \\w+ fixture name literal"
+        )
+    return marker.args[0]
+
+
+def _shared_build_prefix(name: str) -> str:
+    return f"{name}-{_REPO_KEY}-"
+
+
+@cache
+def _shared_build_dir(name: str) -> Path:
+    """Dir keyed by checkout and fixture source, before per-test injections."""
+    key = hashlib.sha256((FIXTURES_DIR / f"{name}.yaml").read_bytes()).hexdigest()[:16]
+    return SHARED_BUILDS_ROOT / (_shared_build_prefix(name) + key)
+
+
+def _read_stamp(stamp: Path, shared_dir: Path) -> Path | None:
+    """ELF path recorded by the last completed compile, or None."""
+    try:
+        text = stamp.read_text(encoding="utf-8").strip()
+    except FileNotFoundError:
+        return None
+    except OSError as err:
+        print(f"Cannot read {stamp}: {err}")
+        return None
+    if not text:
+        print(f"Ignoring empty stamp {stamp}")
+        return None
+    built = Path(text)
+    # Never trust a stamp pointing outside its own build dir as an unlink target
+    if shared_dir.resolve() in built.resolve().parents:
+        return built
+    print(f"Ignoring stamp {stamp} pointing outside {shared_dir}")
+    return None
+
+
+def _unused_since(stale: Path, cutoff: float) -> bool:
+    """Whether a build dir looks untouched since cutoff; unknown counts as used."""
+    # Newest of the .built stamp (rewritten by every completed compile) and the
+    # dir itself (freshened by a worker claiming the dir before locking)
+    newest: float | None = None
+    for probe in (stale / ".built", stale):
+        try:
+            mtime = probe.stat().st_mtime
+        except FileNotFoundError:
+            continue
+        except NotADirectoryError:
+            return True  # a stray file where a dir should be; reclaimable
+        except OSError as err:
+            print(f"Cannot age-probe {stale}: {err}")
+            return False  # unknown never authorizes deletion
+        newest = mtime if newest is None else max(newest, mtime)
+    return newest is not None and newest < cutoff
+
+
+def _prune_stale_builds(name: str, keep: Path) -> None:
+    """Remove outdated build dirs (blocking, run in executor): this checkout's
+    other dirs for the fixture, plus anything untouched for 30 days. Tolerates
+    other workers pruning the same dirs concurrently."""
+    cutoff = time.time() - _STALE_BUILD_MAX_AGE_S
+    prefix = _shared_build_prefix(name)
+    for stale in SHARED_BUILDS_ROOT.iterdir():
+        if stale == keep:
+            continue
+        same_fixture = stale.name.startswith(prefix)
+        if not same_fixture and not _unused_since(stale, cutoff):
+            continue
+        # Creating .lock bumps the dir mtime, so remember whether the re-probe
+        # under the lock can trust it
+        lock_preexisting = (stale / ".lock").exists()
+        try:
+            lock_file = (stale / ".lock").open("w")
+        except FileNotFoundError:
+            continue  # pruned by another worker meanwhile
+        except NotADirectoryError:
+            print(f"Removing stray file {stale}")
+            stale.unlink(missing_ok=True)
+            continue
+        except OSError as err:
+            print(f"Cannot prune {stale}: {err}")
+            continue
+        with lock_file:
+            try:
+                fcntl.flock(lock_file.fileno(), fcntl.LOCK_EX | fcntl.LOCK_NB)
+            except BlockingIOError:
+                continue  # still in use by another run
+            # Re-probe under the lock: a worker freshens its dir before
+            # locking, so a just-claimed dir no longer looks unused. A dir
+            # whose .lock we just created cannot be held by anyone, and our
+            # own open bumped its mtime, so its pre-open probe stands
+            if (
+                lock_preexisting
+                and not same_fixture
+                and not _unused_since(stale, cutoff)
+            ):
+                continue
+            # rmtree tolerates races; a leftover partial tree only costs a
+            # rebuild, since the ELF is deleted before every compile
+            try:
+                rmtree(stale)
+            except OSError as err:
+                print(f"Failed to prune {stale}: {err}")
+
+
+async def _run_esphome_compile(
+    config_path: Path, cwd: Path, env: dict[str, str]
+) -> None:
+    """Run `esphome compile`, retrying up to 3 times on a segfault."""
+    max_retries = 3
+    for attempt in range(max_retries):
+        # Compile using subprocess, inheriting stdout/stderr to show progress
+        proc = await asyncio.create_subprocess_exec(
+            sys.executable,
+            "-m",
+            "esphome",
+            "compile",
+            str(config_path),
+            cwd=cwd,
+            stdout=None,  # Inherit stdout
+            stderr=None,  # Inherit stderr
+            stdin=asyncio.subprocess.DEVNULL,
+            # Start in a new process group to isolate signal handling
+            start_new_session=True,
+            env=env,
+            close_fds=False,
+        )
+        await proc.wait()
+
+        if proc.returncode == 0:
+            break
+        if proc.returncode == -11 and attempt < max_retries - 1:
+            # Segfault (-11 = SIGSEGV), retry
+            print(
+                f"Compilation segfaulted (attempt {attempt + 1}/{max_retries}), retrying..."
+            )
+            await asyncio.sleep(1)  # Brief pause before retry
+            continue
+        raise RuntimeError(
+            f"Failed to compile {config_path}, return code: {proc.returncode}. "
+            f"Run with 'pytest -s' to see compilation output."
+        )
+
+
+def _resolve_compiled_binary(config_path: Path) -> Path:
+    """Load the config to learn the compiled ELF path (blocking, run in executor)."""
+    CORE.reset()  # Reset CORE state between test runs
+    CORE.config_path = config_path
+    config = esphome.config.read_config(
+        {"command": "compile", "config": str(config_path)}
+    )
+    if config is None:
+        raise RuntimeError(f"Failed to read config from {config_path}")
+    idedata = get_idedata(config)
+    binary_path = Path(idedata.firmware_elf_path)
+    if not binary_path.exists():
+        raise RuntimeError(f"Compiled binary not found at {binary_path}")
+    return binary_path
+
+
 @pytest_asyncio.fixture
 async def compile_esphome(
     integration_test_dir: Path,
     shared_platformio_cache: Path,
+    request: pytest.FixtureRequest,
 ) -> AsyncGenerator[CompileFunction]:
     """Compile an ESPHome configuration and return the binary path."""
 
@@ -265,66 +489,96 @@ async def compile_esphome(
         # Use the shared PlatformIO cache for faster compilation
         # This avoids re-downloading dependencies for each test
         env = _get_platformio_env(shared_platformio_cache)
-
-        # Retry compilation up to 3 times if we get a segfault
-        max_retries = 3
-        for attempt in range(max_retries):
-            # Compile using subprocess, inheriting stdout/stderr to show progress
-            proc = await asyncio.create_subprocess_exec(
-                sys.executable,
-                "-m",
-                "esphome",
-                "compile",
-                str(config_path),
-                cwd=integration_test_dir,
-                stdout=None,  # Inherit stdout
-                stderr=None,  # Inherit stderr
-                stdin=asyncio.subprocess.DEVNULL,
-                # Start in a new process group to isolate signal handling
-                start_new_session=True,
-                env=env,
-                close_fds=False,
-            )
-            await proc.wait()
-
-            if proc.returncode == 0:
-                # Success!
-                break
-            if proc.returncode == -11 and attempt < max_retries - 1:
-                # Segfault (-11 = SIGSEGV), retry
-                print(
-                    f"Compilation segfaulted (attempt {attempt + 1}/{max_retries}), retrying..."
-                )
-                await asyncio.sleep(1)  # Brief pause before retry
-                continue
-            # Other error or final retry
-            raise RuntimeError(
-                f"Failed to compile {config_path}, return code: {proc.returncode}. "
-                f"Run with 'pytest -s' to see compilation output."
-            )
-
-        # Load the config to get idedata (blocking call, must use executor)
         loop = asyncio.get_running_loop()
 
-        def _read_config_and_get_binary():
+        name = _shared_yaml_name(request)
-            CORE.reset()  # Reset CORE state between test runs
+        if name is None:
-            CORE.config_path = config_path
+            await _run_esphome_compile(config_path, integration_test_dir, env)
-            config = esphome.config.read_config(
+            return await loop.run_in_executor(
-                {"command": "compile", "config": str(config_path)}
+                None, _resolve_compiled_binary, config_path
             )
-            if config is None:
-                raise RuntimeError(f"Failed to read config from {config_path}")
 
-            # Get the compiled binary path
+        # Shared fixture: build in a hash-keyed dir so tests sharing a config
-            idedata = get_idedata(config)
+        # pay one full compile and later only a main.cpp (port) rebuild + relink
-            return Path(idedata.firmware_elf_path)
+        shared_dir = _shared_build_dir(name)
-
+        shared_dir.mkdir(parents=True, exist_ok=True)
-        binary_path = await loop.run_in_executor(None, _read_config_and_get_binary)
+        # Freshen the dir before locking so a concurrent age sweep, which
-
+        # re-probes under the lock, never reaps a dir a worker just claimed;
-        if not binary_path.exists():
+        # if a peer reaped it already, the guarded lock open recreates it
-            raise RuntimeError(f"Compiled binary not found at {binary_path}")
+        with suppress(FileNotFoundError):
-
+            os.utime(shared_dir)
-        return binary_path
+        if shared_dir not in _pruned_dirs:
+            _pruned_dirs.add(shared_dir)
+            await loop.run_in_executor(None, _prune_stale_builds, name, shared_dir)
+        shared_config = shared_dir / f"{name}.yaml"
+        private_binary = integration_test_dir / f"{name}.elf"
+        content = await loop.run_in_executor(None, read_file, config_path)
+        if content != getattr(request.node, "_shared_yaml_content", None):
+            # The dir is keyed by the fixture source; a mutated config would be
+            # cached under a hash that does not describe it
+            raise RuntimeError(
+                "shared_yaml tests must compile the yaml_config content unmodified"
+            )
+        # flock serializes concurrent xdist workers; closing the fd releases it.
+        # Hand-rolled rather than filelock.FileLock: non-blocking retries keep
+        # the wait cancellable, while a blocking acquire in an executor thread
+        # would survive test cancellation holding the fd
+        try:
+            lock_file = (shared_dir / ".lock").open("w")
+        except FileNotFoundError:
+            # A peer run pruning divergent hashes reaped the dir between our
+            # mkdir and this open; recreate it and pay a full rebuild
+            shared_dir.mkdir(parents=True, exist_ok=True)
+            lock_file = (shared_dir / ".lock").open("w")
+        with lock_file:
+            start = time.monotonic()
+            last_report = start
+            while True:
+                try:
+                    fcntl.flock(lock_file.fileno(), fcntl.LOCK_EX | fcntl.LOCK_NB)
+                    break
+                except BlockingIOError:
+                    now = time.monotonic()
+                    if now - start > _SHARED_LOCK_TIMEOUT_S:
+                        raise RuntimeError(
+                            f"Timed out waiting for the {shared_dir} lock"
+                        ) from None
+                    if now - last_report >= _SHARED_LOCK_REPORT_S:
+                        last_report = now
+                        print(
+                            f"Waited {now - start:.0f}s for another worker's "
+                            f"build of {shared_dir.name}"
+                        )
+                    await asyncio.sleep(_SHARED_LOCK_POLL_S)
+            # .built carries the ELF path of the last completed compile, so
+            # later workers skip the config re-read in _resolve_compiled_binary
+            stamp = shared_dir / ".built"
+            if (built := _shared_elf_paths.get(shared_dir)) is None:
+                built = await loop.run_in_executor(None, _read_stamp, stamp, shared_dir)
+            # Delete the ELF before compiling: whatever exists afterwards is
+            # this compile's output, so no staleness check is ever needed.
+            # With no usable stamp, sweep any leftover at the known layout
+            if built is not None:
+                built.unlink(missing_ok=True)
+            else:
+                # Layout-agnostic: ESPHOME_BUILD_PATH can move the build tree
+                for leftover in shared_dir.rglob("program"):
+                    if leftover.is_file():
+                        leftover.unlink()
+            await loop.run_in_executor(
+                None, write_file_if_changed, shared_config, content
+            )
+            await _run_esphome_compile(shared_config, shared_dir, env)
+            if built is None or not built.exists():
+                built = await loop.run_in_executor(
+                    None, _resolve_compiled_binary, shared_config
+                )
+            _shared_elf_paths[shared_dir] = built
+            await loop.run_in_executor(None, write_file, stamp, str(built))
+            # Copy out before unlocking: another worker may relink firmware.elf
+            # while this test is still running its private copy
+            await loop.run_in_executor(None, shutil.copy2, built, private_binary)
+        return private_binary
 
     yield _compile
 

tests/integration/fixtures/api_decode_wire_types.yaml

@@ -1,43 +0,0 @@
-esphome:
-  name: api-decode-wire-types-test
-host:
-api:
-logger:
-  level: DEBUG
-
-switch:
-  - platform: template
-    name: "Wire Switch"
-    optimistic: true
-
-output:
-  - platform: template
-    id: wire_dim
-    type: float
-    write_action:
-      - lambda: ""
-
-light:
-  - platform: monochromatic
-    name: "Wire Light"
-    output: wire_dim
-    default_transition_length: 0s
-    effects:
-      - pulse:
-          name: Pulse
-
-text:
-  - platform: template
-    name: "Wire Text"
-    optimistic: true
-    mode: text
-    min_length: 0
-    max_length: 255
-
-number:
-  - platform: template
-    name: "Wire Number"
-    optimistic: true
-    min_value: -1000
-    max_value: 1000
-    step: 0.5

tests/integration/fixtures/api_empty_message_roundtrip.yaml

@@ -1,11 +0,0 @@
-esphome:
-  name: api-empty-message-test
-host:
-api:
-logger:
-  level: DEBUG
-
-switch:
-  - platform: template
-    name: "Empty Message Switch"
-    optimistic: true

tests/integration/fixtures/api_encode_boundaries.yaml

@@ -1,58 +0,0 @@
-esphome:
-  name: api-encode-boundaries-test
-  # Top-level area fills DeviceInfoResponse.suggested_area (field 16, a two-byte tag)
-  area:
-    id: kitchen_area
-    name: Kitchen
-  on_boot:
-    - sensor.template.publish:
-        id: zero_then_value
-        state: 0.0
-
-host:
-api:
-logger:
-  level: DEBUG
-
-sensor:
-  - platform: template
-    name: "Zero Then Value"
-    id: zero_then_value
-    # Negative int32 takes the ten byte varint path
-    accuracy_decimals: -2
-    update_interval: never
-
-text_sensor:
-  - platform: template
-    name: "Long Text"
-    id: long_text
-    update_interval: never
-
-number:
-  - platform: template
-    name: "Negative Number"
-    optimistic: true
-    min_value: -1000
-    max_value: 1000
-    step: 0.5
-    initial_value: -123.5
-
-select:
-  - platform: template
-    name: "Long Option Select"
-    optimistic: true
-    options:
-      - short
-      - "option-with-a-name-long-enough-that-its-length-prefix-needs-two-varint-bytes-when-the-list-entities-response-is-encoded-xxxxxxxxxx"
-    initial_option: short
-
-button:
-  - platform: template
-    name: "Publish Values"
-    on_press:
-      - sensor.template.publish:
-          id: zero_then_value
-          state: 12.5
-      - text_sensor.template.publish:
-          id: long_text
-          state: !lambda return std::string(200, 'y');

tests/integration/fixtures/host_ota_deflate.yaml

@@ -0,0 +1,9 @@
+esphome:
+  name: host-ota-test
+host:
+api:
+ota:
+  - platform: esphome
+    port: __OTA_PORT__
+logger:
+  level: DEBUG

tests/integration/fixtures/sensor_filters_batch_window.yaml

@@ -1,58 +0,0 @@
-esphome:
-  name: test-batch-window-filters
-
-host:
-api:
-  batch_delay: 0ms  # Disable batching to receive all state updates
-logger:
-  level: DEBUG
-
-# Template sensor that we'll use to publish values
-sensor:
-  - platform: template
-    name: "Source Sensor"
-    id: source_sensor
-    accuracy_decimals: 2
-
-  # Batch window filters (window_size == send_every) - use streaming filters
-  - platform: copy
-    source_id: source_sensor
-    name: "Min Sensor"
-    id: min_sensor
-    filters:
-      - min:
-          window_size: 5
-          send_every: 5
-          send_first_at: 1
-
-  - platform: copy
-    source_id: source_sensor
-    name: "Max Sensor"
-    id: max_sensor
-    filters:
-      - max:
-          window_size: 5
-          send_every: 5
-          send_first_at: 1
-
-  - platform: copy
-    source_id: source_sensor
-    name: "Moving Avg Sensor"
-    id: moving_avg_sensor
-    filters:
-      - sliding_window_moving_average:
-          window_size: 5
-          send_every: 5
-          send_first_at: 1
-
-# Button to trigger publishing test values
-button:
-  - platform: template
-    name: "Publish Values Button"
-    id: publish_button
-    on_press:
-      - lambda: |-
-          // Publish 10 values: 1.0, 2.0, ..., 10.0
-          for (int i = 1; i <= 10; i++) {
-            id(source_sensor).publish_state(float(i));
-          }

tests/integration/fixtures/uart_mock_modbus_client_read_write.yaml

@@ -1,111 +0,0 @@
-esphome:
-  name: uart-mock-modbus-cli-rw
-
-host:
-api:
-logger:
-  level: VERBOSE
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
-# The actual UART bus used is the uart_mock component below
-uart:
-  baud_rate: 115200
-  port: /dev/null
-
-# Two virtual buses looped back to each other: the client's transmissions reach the server and the
-# server's replies reach the client. auto_start so forwarding is active before the button fires.
-uart_mock:
-  - id: virtual_uart_server
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_client
-              data: !lambda return data;
-  - id: virtual_uart_client
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_server
-              data: !lambda return data;
-
-globals:
-  - id: stored_1
-    type: uint16_t
-    initial_value: "0"
-
-modbus:
-  - uart_id: virtual_uart_server
-    id: virtual_modbus_server
-    role: server
-  - uart_id: virtual_uart_client
-    id: virtual_modbus_client
-    role: client
-    turnaround_time: 10ms
-
-modbus_server:
-  - address: 1
-    modbus_id: virtual_modbus_server
-    registers:
-      # Writable + readable register: the read publishes what it returns, so the test can confirm the
-      # write half of the 0x17 ran before the read half (Modbus 6.17).
-      - address: 0x01
-        value_type: U_WORD
-        read_lambda: |-
-          id(srv_read_1).publish_state(id(stored_1));
-          return id(stored_1);
-        write_lambda: |-
-          id(stored_1) = x;
-          id(srv_write_1).publish_state(x);
-          return true;
-      # Read-only register, returned together with 0x01 by the 2-register read half.
-      - address: 0x02
-        value_type: U_WORD
-        read_lambda: return 0x00AA;
-
-sensor:
-  # Server-side observations.
-  - platform: template
-    name: "srv_write_1"
-    id: srv_write_1
-  - platform: template
-    name: "srv_read_1"
-    id: srv_read_1
-  # Client-side read-back: the values the client's on_response received.
-  - platform: template
-    name: "client_read_0"
-    id: client_read_0
-  - platform: template
-    name: "client_read_1"
-    id: client_read_1
-
-button:
-  - platform: template
-    name: "Start Scenario"
-    id: start_scenario_btn
-    on_press:
-      # FC 0x17: write reg 0x0001 = 0x1234, then read regs 0x0001..0x0002 back in the same transaction.
-      - modbus_client.read_write_multiple_registers:
-          address: 0x01
-          read_address: 0x0001
-          read_count: 2
-          write_address: 0x0001
-          values: [0x1234]
-          on_response:
-            then:
-              - lambda: |-
-                  // values is the read-back block: reg 0x0001 (must be the just-written 0x1234) and reg 0x0002.
-                  if (values.size() >= 2) {
-                    id(client_read_0).publish_state(values[0]);
-                    id(client_read_1).publish_state(values[1]);
-                  }

tests/integration/fixtures/uart_mock_modbus_custom_pdu.yaml

@@ -1,88 +0,0 @@
-esphome:
-  name: uart-mock-modbus-custom-pdu
-
-host:
-api:
-logger:
-  level: VERBOSE
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
-# The actual UART bus used is the uart_mock component below
-uart:
-  baud_rate: 115200
-  port: /dev/null
-
-uart_mock:
-  - id: virtual_uart_server
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_controller
-              data: !lambda return data;
-  - id: virtual_uart_controller
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_server
-              data: !lambda return data;
-
-modbus:
-  - uart_id: virtual_uart_server
-    id: virtual_modbus_server
-    role: server
-  - uart_id: virtual_uart_controller
-    id: virtual_modbus_controller
-    role: client
-    turnaround_time: 10ms
-
-modbus_controller:
-  - address: 1
-    modbus_id: virtual_modbus_controller
-    id: modbus_controller_1
-    update_interval: 1s
-
-modbus_server:
-  - address: 1
-    modbus_id: virtual_modbus_server
-    id: modbus_server_1
-    registers:
-      - address: 0x01
-        value_type: U_WORD
-        read_lambda: return 259;
-
-sensor:
-  # Plain read to confirm the controller <-> server link is up.
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "plain_read"
-    address: 0x01
-    register_type: holding
-    value_type: U_WORD
-  # Custom PDU: read holding register 0x0001, count 1. The PDU is
-  # {function code, address hi, address lo, count hi, count lo}; the device
-  # address and CRC are added by the hub. The lambda parses the response payload
-  # (the register value, big-endian).
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "custom_read"
-    custom_pdu: [0x03, 0x00, 0x01, 0x00, 0x01]
-    lambda: |-
-      if (data.size() < 2) return {};
-      return (float) ((data[0] << 8) | data[1]);
-
-button:
-  - platform: template
-    name: "Start Scenario"
-    id: start_scenario_btn
-    # This test does not have anything to start (mock is autostart)

tests/integration/fixtures/uart_mock_modbus_deprecated_write_buffer.yaml

@@ -1,106 +0,0 @@
-esphome:
-  name: uart-mock-modbus-dep-buffer
-
-host:
-api:
-logger:
-  level: VERBOSE
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
-# The actual UART bus used is the uart_mock component below
-uart:
-  baud_rate: 115200
-  port: /dev/null
-
-uart_mock:
-  - id: virtual_uart_server
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_controller
-              data: !lambda return data;
-  - id: virtual_uart_controller
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_server
-              data: !lambda return data;
-
-globals:
-  - id: reg10
-    type: uint16_t
-    initial_value: "0"
-
-modbus:
-  - uart_id: virtual_uart_server
-    id: virtual_modbus_server
-    role: server
-  - uart_id: virtual_uart_controller
-    id: virtual_modbus_controller
-    role: client
-    turnaround_time: 10ms
-
-modbus_controller:
-  - address: 1
-    modbus_id: virtual_modbus_controller
-    id: modbus_controller_1
-    update_interval: 1s
-
-modbus_server:
-  - address: 1
-    modbus_id: virtual_modbus_server
-    id: modbus_server_1
-    registers:
-      - address: 0x10
-        value_type: U_WORD
-        read_lambda: return id(reg10);
-        write_lambda: |-
-          id(reg10) = x;
-          return true;
-
-# A number whose write_lambda uses the DEPRECATED buffer parameter (fills `payload` with a legacy raw
-# frame as words: device address + function code + data) instead of the new item->write_* API. The write
-# must still land with its legacy semantics, and the one-time deprecation warning must fire only once per
-# entity no matter how many writes happen.
-number:
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "buf_number"
-    id: buf_number
-    address: 0x10
-    register_type: holding
-    value_type: U_WORD
-    min_value: 0
-    max_value: 1000
-    step: 1
-    write_lambda: |-
-      // Legacy raw frame as words: [addr 0x01 | fc 0x06], register 0x0010, value.
-      payload.push_back(0x0106);
-      payload.push_back(0x0010);
-      payload.push_back((uint16_t) x);
-      return {};
-
-# Reports the server-side register so the test can observe that the deprecated buffer write landed.
-sensor:
-  - platform: template
-    name: "written_value"
-    id: written_value
-    update_interval: 0.5s
-    lambda: "return id(reg10);"
-
-button:
-  - platform: template
-    name: "Start Scenario"
-    id: start_scenario_btn
-    # The test drives the writes via number_command; the mock is autostart.