Kevin Ahrendt
2c3867dbdb
[voice_assistant] Check for an already loaded model before building one
...
A WakeWordModel claims a preference backend that is never released, so a model
built only to be rejected by add_runtime_model() costs internal RAM that never
comes back. The duplicate case is expected here, since a config change can
re-queue a download that is already in flight.
Move the check above the construction. The id was free a moment earlier and
this runs on the main loop, so a failed add is now always a genuine failure.
2026-08-10 08:11:47 -04:00
Kevin Ahrendt
b26f6e79e1
[voice_assistant] Prepend the model URL prefix in place
...
clang-tidy's performance-inefficient-string-concatenation flags building
the absolute URL with operator+, which allocates a temporary for the
prefix and another for the result. Insert the prefix instead.
2026-08-10 08:11:47 -04:00
Kevin Ahrendt
aedc5f2f28
[voice_assistant] Handle downloads without a content length
...
A chunked response reports no usable content length, 0 on ESP-IDF and
SIZE_MAX on Arduino, so both the manifest and the model were rejected.
Bound the model read by the size Home Assistant advertised, falling back
to the content length when it advertised none, and read a manifest of
unknown length up to the existing cap. The read still has to deliver the
expected number of bytes, and the SHA256 check is unchanged.
Also move http_request_ out of the block documented as main loop only,
since the download task uses it.
2026-08-10 08:11:47 -04:00
Kevin Ahrendt
6b180f7be9
[voice_assistant] Use starts_with for the model URL check
...
clang-tidy's modernize-use-starts-ends-with flags the compare calls.
2026-08-10 08:11:47 -04:00
Kevin Ahrendt
5a429696c0
Remove non-existant external wake words feature flags
2026-08-10 08:11:47 -04:00
Kevin Ahrendt
be2b2920c8
Clean up comments
...
- Remove unnecessary ones that are self-explanaied by the code
- Reduce verbosity
2026-08-10 08:11:47 -04:00
Kevin Ahrendt
046d030d36
[voice_assistant] Download wake word models advertised by Home Assistant
...
Home Assistant sends the list of external wake words it knows about with
every configuration request. This picks up the ones micro_wake_word can
run, downloads them on demand, and hands them to micro_wake_word so they
can be activated like a compiled-in model.
Set the new http_request option to turn this on. It requires
micro_wake_word to be configured, and pulls in the sha256 and json
components used to verify a download and read its manifest.
How it works:
- The advertised wake words are cached on each configuration request, so
entries Home Assistant stops sending drop out and their models are
unloaded.
- When Home Assistant activates a wake word whose model is not loaded
yet, the model is queued and fetched by a background task. The wake
word is reported as active straight away so the UI reflects the request
while the download runs.
- Downloads are checked against the size and hash from the manifest, and
the model has to use the same feature step size as the frontend.
- A model that fails to load is stored as disabled so it is not retried
on every boot.
- Loaded models are restored after a reboot.
The configuration response now comes entirely from voice_assistant, which
merges the compiled-in models with the cached external wake words, so the
API no longer needs to append them itself.
2026-08-10 08:11:47 -04:00
J. Nick Koston
25cb440005
[core] Use Happy Eyeballs for remote file downloads ( #18050 )
2026-08-10 17:29:00 +12:00
J. Nick Koston
0f59ef36a9
[core] Store the validated-config cache as JSON to drop YAML off the upload fast path ( #18106 )
2026-08-10 17:26:41 +12:00
esphome[bot]
3de8c7f95c
Bump bundled esphome-device-builder to 1.9.5 ( #18223 )
2026-08-10 01:49:54 +00:00
Jesse Hills
989dbd7550
[ci] Name release runs after the version or dev tag they build ( #18110 )
2026-08-10 10:10:38 +12:00
ab12e5490f
[modbus] Rename send_pdu() to queue_pdu() ( #18196 )
...
Co-authored-by: Claude <noreply@anthropic.com >
Co-authored-by: J. Nick Koston <nick@koston.org >
2026-08-09 17:00:44 -05:00
J. Nick Koston
e9f428983e
[ble_device_base] Bind BLEHub to the build's tracker at compile time ( #18181 )
2026-08-09 08:57:31 -05:00
J. Nick Koston
862b13c8dd
[esp32_ble_tracker] Retire the scanner-state listener interface ( #18179 )
2026-08-08 20:58:48 -05:00
Edu_Coder
2bb01853e0
[tuya] GMT time 0x0C command handler ( #17158 )
2026-08-08 17:53:10 -07:00
J. Nick Koston
c7d6b4aaa4
[esp32_ble_tracker] Retire the raw listener path and parser-type enum ( #18177 )
2026-08-08 19:13:07 -05:00
J. Nick Koston
8c74e3d5ef
[bluetooth_proxy] Deliver scanner state through the hub callback ( #18175 )
2026-08-08 15:59:49 -05:00
J. Nick Koston
04384e0f5b
[ble_device_base] Bind the GATT backend at compile time ( #18185 )
2026-08-08 15:59:32 -05:00
J. Nick Koston
7218aa4803
[bluetooth_connection] Explicit pairing for rp2 ( #18166 )
2026-08-08 09:51:12 -05:00
J. Nick Koston
9cb46aa584
[bluetooth_proxy] Deliver esp32 advertisements through the hub callback ( #18173 )
2026-08-08 09:50:32 -05:00
Josef Zweck
747c5c3e40
[modbus] Make sure we log on no accepting device ( #18187 )
2026-08-08 09:34:59 -05:00
Edvard Filistovič
68acc055bf
[ble_device_base] Migrate BLE sensor platforms to the neutral layer (batch 13: xiaomi_rtcgq02lm, xiaomi_wx08zm, xiaomi_xmwsdj04mmc) ( #18183 )
2026-08-08 02:06:40 -05:00
2730c10c2c
[modbus] Route broadcast writes (address 0) to all server devices ( #17387 )
...
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com >
Co-authored-by: J. Nick Koston <nick@koston.org >
2026-08-08 01:35:49 -05:00
Edvard Filistovič
252bb3333e
[ble_device_base] Migrate BLE sensor platforms to the neutral layer (batch 12: xiaomi_miscale, xiaomi_mjyd02yla, xiaomi_mue4094rt) ( #18180 )
2026-08-08 01:34:08 -05:00
Edvard Filistovič
98f4854ecd
[ble_device_base] Migrate BLE sensor platforms to the neutral layer (batch 11: xiaomi_lywsdcgq, xiaomi_mhoc303, xiaomi_mhoc401) ( #18178 )
2026-08-08 01:01:24 -05:00
Edvard Filistovič
413a4c5885
[ble_device_base] Migrate BLE sensor platforms to the neutral layer (batch 10: xiaomi_lywsd02, xiaomi_lywsd02mmc, xiaomi_lywsd03mmc) ( #18174 )
2026-08-08 00:27:44 -05:00
Edvard Filistovič
087b80eeb5
[ble_device_base] Migrate BLE sensor platforms to the neutral layer (batch 9: xiaomi_hhccjcy10, xiaomi_hhccpot002, xiaomi_jqjcy01ym) ( #18172 )
2026-08-07 23:42:37 -05:00
745dee0734
[usb_cdc_acm] Don't discard queued TX data when USB flush times out ( #17637 )
...
Co-authored-by: Claude Fable 5 <noreply@anthropic.com >
Co-authored-by: J. Nick Koston <nick@koston.org >
2026-08-07 23:24:56 -05:00
Edvard Filistovič
b986530efc
[ble_device_base] Migrate BLE sensor platforms to the neutral layer (batch 8: xiaomi_cgpr1, xiaomi_gcls002, xiaomi_hhccjcy01) ( #18171 )
2026-08-07 22:51:33 -05:00
Edvard Filistovič
3aaea907ba
[ble_device_base] Migrate BLE sensor platforms to the neutral layer (batch 7: xiaomi_cgd1, xiaomi_cgdk2, xiaomi_cgg1) ( #18170 )
2026-08-07 21:59:21 -05:00
Edvard Filistovič
1d184b43eb
[ble_device_base] Migrate BLE sensor platforms to the neutral layer (batch 6: thermopro_ble, exposure_notifications, xiaomi_ble) ( #18168 )
2026-08-07 20:47:52 -05:00
J. Nick Koston
8d494a84c5
[bluetooth_connection] Engine follow-ups from the rp2 GATT series ( #18159 )
2026-08-07 16:25:55 -05:00
Bonne Eggleston and Claude
b0aec6dc2f
[modbus_client] Lambda sugar ( #18146 )
...
Co-authored-by: Claude <noreply@anthropic.com >
2026-08-07 16:09:15 -05:00
Edvard Filistovič and J. Nick Koston
4a7d270494
[ble_device_base] Migrate BLE sensor platforms to the neutral layer (batch 5: airthings_ble, inkbird_ibsth1_mini, radon_eye_ble) ( #18165 )
...
Co-authored-by: J. Nick Koston <nick@home-assistant.io >
2026-08-07 20:46:43 +00:00
dependabot[bot]
ae26483be6
Bump github/codeql-action/init from 4.37.5 to 4.37.6 ( #18164 )
...
Signed-off-by: dependabot[bot] <support@github.com >
2026-08-07 19:27:57 +00:00
dependabot[bot]
5d7bd179b1
Bump github/codeql-action/analyze from 4.37.5 to 4.37.6 ( #18163 )
...
Signed-off-by: dependabot[bot] <support@github.com >
2026-08-07 14:27:09 -05:00
Edvard Filistovič
23a3454551
[ble_device_base] Migrate BLE sensor platforms to the neutral layer (batch 4: ruuvi_ble, ruuvitag, b_parasite) ( #18161 )
2026-08-07 14:21:46 -05:00
f5ee72753d
[modbus_client] Add typed read/write actions ( #18078 )
...
Co-authored-by: J. Nick Koston <nick@koston.org >
Co-authored-by: Claude <noreply@anthropic.com >
2026-08-07 14:18:20 -05:00
esphome[bot]
ee13996ee6
Bump bundled esphome-device-builder to 1.9.4 ( #18162 )
2026-08-07 19:17:26 +00:00
Josef Zweck and J. Nick Koston
c24e61439b
[modbus] Add server support for read/write multiple registers (0x17) ( #17357 )
...
Co-authored-by: J. Nick Koston <nick@koston.org >
2026-08-07 14:17:11 -05:00
J. Nick Koston
2e1c517821
[bluetooth_proxy] Enable active connections on rp2 ( #18132 )
2026-08-07 13:51:41 -05:00
Mustafa KURU and Jonathan Swoboda
950cfc4da3
[ld6002b] Add select and button platforms (4/5) ( #17822 )
...
Co-authored-by: Jonathan Swoboda <154711427+swoboda1337@users.noreply.github.com >
2026-08-07 14:33:37 -04:00
Edvard Filistovič and J. Nick Koston
715b14aeba
[ble_device_base] Migrate BLE sensor platforms to the neutral layer (batch 3: mopeka_ble, mopeka_pro_check, mopeka_std_check) ( #17951 )
...
Co-authored-by: J. Nick Koston <nick@koston.org >
2026-08-07 12:59:27 -05:00
J. Nick Koston
d7b5ad77da
[bluetooth_connection] Add BTstack GATT client backend for rp2 ( #18131 )
2026-08-07 12:53:09 -05:00
Edvard Filistovič
77bfda6f1f
[ble_device_base] Migrate BLE sensor platforms to the neutral layer (batch 2: atc_mithermometer, pvvx_mithermometer, bthome_mithermometer) ( #17950 )
2026-08-07 12:48:18 -05:00
b326cefea7
[esp32] refactor esp32-vfs default configs to FINAL co-routine & add some defaults ( #17337 )
...
Co-authored-by: Oliver Kleinecke <kleinecke.oliver@googlemail.com >
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com >
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com >
Co-authored-by: storage split <ai@local>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
2026-08-07 12:36:59 -05:00
J. Nick Koston
c0e70d9beb
[rp2040_ble] Add scan arbitration and GATT client hooks ( #18155 )
2026-08-07 11:50:18 -05:00
J. Nick Koston
c5e165d062
[bluetooth_proxy] Make the GATT dispatch platform neutral ( #18130 )
2026-08-07 11:29:19 -05:00
Edvard Filistovič
5f483b11b6
[ble_device_base] Migrate BLE sensor platforms to the neutral layer (batch 1: ble_presence, ble_rssi, ble_scanner) ( #17716 )
2026-08-07 16:19:08 +00:00
Mustafa KURU and Jonathan Swoboda
b802740997
[ld6002b] Add switch, number and text sensor platforms (3/5) ( #17821 )
...
Co-authored-by: Jonathan Swoboda <154711427+swoboda1337@users.noreply.github.com >
2026-08-07 11:11:29 -04:00
Kevin Ahrendt