[cli] DRY up --prebuilt-dir helpers

Two small simplifications surfaced by re-reading the diff with a 'is
this DRY?' lens:

- Extract _missing_prebuilt_flash_tool(): the
  _ensure_platform_packages_for_prebuilt_upload helper had two
  near-identical 'if platform check; if finder() is not None return 0;
  tool_label = ...' blocks. Lift the platform->(tool_name) selection
  into a tiny helper so the early-return is one line and the install
  body is no longer interleaved with the platform dispatch.

- Collapse the two near-duplicate 'firmware not found' return points in
  upload_using_picotool. Both branches just selected an error message
  and returned 1; reorder so the message selection happens first and
  there's a single 'return 1'.

No behavior change; pure refactor. 587 unit tests pass.

Issue: esphome/device-builder#572

.ai/instructions.md

@@ -59,19 +59,6 @@ This document provides essential context for AI models interacting with this pro
         - Protected/private fields: `lower_snake_case_with_trailing_underscore_`
         - Favor descriptive names over abbreviations
 
-*   **Python Idioms:**
-    *   **Assignment expressions (PEP 572):** Prefer the walrus operator (`:=`) wherever it removes a redundant lookup or a throwaway temporary. The most common case in component code is presence-checking a config key and then indexing it separately — fetch once with `.get()` and bind in the condition instead:
-        ```python
-        # Bad - looks up CONF_BLAH twice
-        if CONF_BLAH in config:
-            cg.add(var.set_blah(config[CONF_BLAH]))
-
-        # Good - single lookup, value bound inline
-        if (blah := config.get(CONF_BLAH)) is not None:
-            cg.add(var.set_blah(blah))
-        ```
-        The same applies to `while` loops and comprehensions where it avoids recomputing a value. Don't contort code to use it — reach for `:=` only when it genuinely cuts repetition or an extra assignment line.
-
 *   **C++ Field Visibility:**
     *   **Prefer `protected`:** Use `protected` for most class fields to enable extensibility and testing. Fields should be `lower_snake_case_with_trailing_underscore_`.
     *   **Use `private` for safety-critical cases:** Use `private` visibility when direct field access could introduce bugs or violate invariants:
@@ -411,23 +398,13 @@ This document provides essential context for AI models interacting with this pro
         │       ├── i2c/         # I2C bus
         │       └── spi/         # SPI bus
         └── components/[component]/
-            ├── common.yaml          # Component-only config (no bus definitions)
-            ├── test.esp32-idf.yaml      # config + compile
-            ├── test.esp8266-ard.yaml    # config + compile
-            ├── test-variant.esp32-idf.yaml  # variant test, config + compile
-            ├── validate.esp32-idf.yaml      # config-only (never compiled)
-            └── validate-legacy.esp32-idf.yaml  # config-only variant
+            ├── common.yaml      # Component-only config (no bus definitions)
+            ├── test.esp32-idf.yaml
+            ├── test.esp8266-ard.yaml
+            └── test.rp2040-ard.yaml
         ```
         Run them using `script/test_build_components`. Use `-c <component>` to test specific components and `-t <target>` for specific platforms.
 
-    *   **Config-only test files (`validate.*.yaml`):** Use this prefix when a YAML file only needs to exercise schema/validation paths and does not need to be compiled. CI runs `validate.*.yaml` files with `esphome config` only and skips them during compile. The grammar mirrors `test.*.yaml`:
-        - `validate.<platform>.yaml` — base config-only test
-        - `validate-<variant>.<platform>.yaml` — config-only variant
-
-        Use this for things like deprecated-syntax migration tests, schema edge cases, or platform-specific validation branches where building firmware adds no signal. A component may have any mix of `test.*.yaml` and `validate.*.yaml` files. Validate files never participate in bus-grouping; each one runs as its own `esphome config` invocation.
-
-        When a PR's only edits to a component are `validate.*.yaml` files (no source changes, no `test.*.yaml` changes, and the component isn't pulled in as a dependency of another changed component), CI skips the compile stage for that component entirely and only runs config validation. This is decided in `script/determine-jobs.py` via `_component_change_is_validate_only` and surfaced as the `validate_only_components` output that the `test-build-components-split` job consumes.
-
     *   **Test Grouping with Packages:** Components that use shared bus packages can be grouped together in CI to reduce build count. **Never define buses (uart, i2c, spi, modbus) directly in test YAML files** — always use packages from `test_build_components/common/`:
         ```yaml
         # test.esp32-idf.yaml — use packages for buses
@@ -475,7 +452,7 @@ This document provides essential context for AI models interacting with this pro
     6.  **Pull Request:** Submit a PR against the `dev` branch. The Pull Request title should have a prefix of the component being worked on (e.g., `[display] Fix bug`, `[abc123] Add new component`). Update documentation, examples, and add `CODEOWNERS` entries as needed. Pull requests should always be made using the `.github/PULL_REQUEST_TEMPLATE.md` template - fill out all sections completely without removing any parts of the template.
 
 *   **Documentation Contributions:**
-    *   Documentation is hosted in the separate `esphome/esphome.io` repository.
+    *   Documentation is hosted in the separate `esphome/esphome-docs` repository.
     *   The contribution workflow is the same as for the codebase.
     *   When editing a component's documentation page, also update the corresponding component index page to ensure both pages remain in sync.
 
@@ -694,7 +671,7 @@ This document provides essential context for AI models interacting with this pro
     - [ ] Explored non-breaking alternatives
     - [ ] Added deprecation warnings if possible (use `ESPDEPRECATED` macro for C++)
     - [ ] Documented migration path in PR description with before/after examples
-    - [ ] Updated all internal usage and esphome.io
+    - [ ] Updated all internal usage and esphome-docs
     - [ ] Tested backward compatibility during deprecation period
 
 *   **Deprecation Pattern (C++):**

.clang-tidy

@@ -116,6 +116,7 @@ Checks: >-
   -portability-template-virtual-member-function,
   -readability-ambiguous-smartptr-reset-call,
   -readability-avoid-nested-conditional-operator,
+  -readability-container-contains,
   -readability-container-data-pointer,
   -readability-convert-member-functions-to-static,
   -readability-else-after-return,

.clang-tidy.hash

@@ -1 +1 @@
-a6ec18b82143e293ca6dee6947217f10a387ace99881a34b2c308ff627c8173c
+96c95feaa60831da5f43e3c6a7c7a3a237e17c5d12995a730dbc3884c8dcd11c

.claude/skills/pr-workflow/SKILL.md

@@ -29,7 +29,7 @@ Required fields:
 - **What does this implement/fix?**: Brief description of changes
 - **Types of changes**: Check ONE appropriate box (Bugfix, New feature, Breaking change, etc.)
 - **Related issue**: Use `fixes <link>` syntax if applicable
-- **Pull request in esphome.io**: Link if docs are needed
+- **Pull request in esphome-docs**: Link if docs are needed
 - **Test Environment**: Check platforms you tested on
 - **Example config.yaml**: Include working example YAML
 - **Checklist**: Verify code is tested and tests added
@@ -54,9 +54,9 @@ Required fields:
 
 - fixes https://github.com/esphome/esphome/issues/XXX
 
-**Pull request in [esphome.io](https://github.com/esphome/esphome.io) with documentation (if applicable):**
+**Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):**
 
-- esphome/esphome.io#XXX
+- esphome/esphome-docs#XXX
 
 ## Test Environment
 
@@ -83,7 +83,7 @@ component_name:
   - [x] Tests have been added to verify that the new code works (under `tests/` folder).
 
 If user exposed functionality or configuration variables are added/changed:
-  - [ ] Documentation added/updated in [esphome.io](https://github.com/esphome/esphome.io).
+  - [ ] Documentation added/updated in [esphome-docs](https://github.com/esphome/esphome-docs).
 ```
 
 ## 5. Push and Create PR

.github/ISSUE_TEMPLATE/config.yml

@@ -2,7 +2,7 @@
 blank_issues_enabled: false
 contact_links:
   - name: Report an issue with the ESPHome documentation
-    url: https://github.com/esphome/esphome.io/issues/new/choose
+    url: https://github.com/esphome/esphome-docs/issues/new/choose
     about: Report an issue with the ESPHome documentation.
   - name: Report an issue with the ESPHome web server
     url: https://github.com/esphome/esphome-webserver/issues/new/choose

.github/PULL_REQUEST_TEMPLATE.md

@@ -16,9 +16,9 @@
 
 - fixes <link to issue>
 
-**Pull request in [esphome.io](https://github.com/esphome/esphome.io) with documentation (if applicable):**
+**Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):**
 
-- esphome/esphome.io#<esphome.io PR number goes here>
+- esphome/esphome-docs#<esphome-docs PR number goes here>
 
 ## Test Environment
 
@@ -43,4 +43,4 @@
   - [ ] Tests have been added to verify that the new code works (under `tests/` folder).
 
 If user exposed functionality or configuration variables are added/changed:
-  - [ ] Documentation added/updated in [esphome.io](https://github.com/esphome/esphome.io).
+  - [ ] Documentation added/updated in [esphome-docs](https://github.com/esphome/esphome-docs).

.github/actions/build-image/action.yaml

@@ -47,7 +47,7 @@ runs:
 
     - name: Build and push to ghcr by digest
       id: build-ghcr
-      uses: docker/build-push-action@f9f3042f7e2789586610d6e8b85c8f03e5195baf # v7.2.0
+      uses: docker/build-push-action@bcafcacb16a39f128d818304e6c9c0c18556b85f # v7.1.0
       env:
         DOCKER_BUILD_SUMMARY: false
         DOCKER_BUILD_RECORD_UPLOAD: false
@@ -73,7 +73,7 @@ runs:
 
     - name: Build and push to dockerhub by digest
       id: build-dockerhub
-      uses: docker/build-push-action@f9f3042f7e2789586610d6e8b85c8f03e5195baf # v7.2.0
+      uses: docker/build-push-action@bcafcacb16a39f128d818304e6c9c0c18556b85f # v7.1.0
       env:
         DOCKER_BUILD_SUMMARY: false
         DOCKER_BUILD_RECORD_UPLOAD: false

.github/actions/cache-esp-idf/action.yml

@@ -1,46 +0,0 @@
-name: Cache ESP-IDF
-description: >
-  Resolve the pinned ESP-IDF version and cache the native ESP-IDF install
-  (toolchains + source) at ~/.esphome-idf. Every job that installs ESP-IDF
-  natively (clang-tidy for IDF/Arduino and the native-IDF component build)
-  shares one cache, since the install is identical (ESPHOME_IDF_DEFAULT_TARGETS
-  defaults to "all", so all toolchains are present regardless of the chip).
-  Callers must set env ESPHOME_ESP_IDF_PREFIX: ~/.esphome-idf and have the
-  Python venv already restored.
-inputs:
-  framework:
-    description: 'Which pinned IDF version to key on: "espidf" (recommended) or "arduino".'
-    default: espidf
-runs:
-  using: composite
-  steps:
-    - name: Resolve ESP-IDF version for cache key
-      # The native-IDF version is pinned in code, not in any file that feeds the
-      # other cache keys, so resolve it explicitly. Keying on it means the cache
-      # invalidates on a version bump (actions/cache never overwrites a key).
-      id: version
-      shell: bash
-      run: |
-        . venv/bin/activate
-        if [ "${{ inputs.framework }}" = "arduino" ]; then
-          version=$(python -c 'from esphome.components.esp32 import ARDUINO_FRAMEWORK_VERSION_LOOKUP as A, ARDUINO_IDF_VERSION_LOOKUP as L; print(L[A["recommended"]])')
-        else
-          version=$(python -c 'from esphome.components.esp32 import ESP_IDF_FRAMEWORK_VERSION_LOOKUP as L; print(L["recommended"])')
-        fi
-        echo "version=$version" >> "$GITHUB_OUTPUT"
-    # Mirror the adjacent PlatformIO cache: only dev-branch runs write the
-    # shared cache (so it lives in the default-branch scope readable by all
-    # PRs), and PRs are restore-only -- they never push multi-GB artifacts into
-    # their own scope / the repo quota (e.g. on a version-bump PR).
-    - name: Cache ESP-IDF install (write on dev)
-      if: github.ref == 'refs/heads/dev'
-      uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
-      with:
-        path: ~/.esphome-idf
-        key: ${{ runner.os }}-esphome-idf-${{ steps.version.outputs.version }}
-    - name: Cache ESP-IDF install (restore-only off dev)
-      if: github.ref != 'refs/heads/dev'
-      uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
-      with:
-        path: ~/.esphome-idf
-        key: ${{ runner.os }}-esphome-idf-${{ steps.version.outputs.version }}

.github/actions/restore-python/action.yml

@@ -27,18 +27,6 @@ runs:
         path: venv
         # yamllint disable-line rule:line-length
         key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-venv-${{ inputs.cache-key }}
-    - name: Set up uv
-      # Only needed on cache miss to populate the venv. ``uv pip install``
-      # detects the activated venv via ``VIRTUAL_ENV`` so the venv layout
-      # downstream jobs rely on is preserved.
-      if: steps.cache-venv.outputs.cache-hit != 'true'
-      uses: astral-sh/setup-uv@fac544c07dec837d0ccb6301d7b5580bf5edae39 # v8.2.0
-      with:
-        enable-cache: true
-        # Pin uv version so the action does not have to fetch the
-        # manifest from raw.githubusercontent.com on every cache
-        # miss; that fetch flakes on Windows runners.
-        version: "0.11.15"
     - name: Create Python virtual environment
       if: steps.cache-venv.outputs.cache-hit != 'true' && runner.os != 'Windows'
       shell: bash
@@ -46,8 +34,8 @@ runs:
         python -m venv venv
         source venv/bin/activate
         python --version
-        uv pip install -r requirements.txt -r requirements_test.txt
-        uv pip install -e .
+        pip install -r requirements.txt -r requirements_test.txt
+        pip install -e .
     - name: Create Python virtual environment
       if: steps.cache-venv.outputs.cache-hit != 'true' && runner.os == 'Windows'
       shell: bash
@@ -55,5 +43,5 @@ runs:
         python -m venv venv
         source ./venv/Scripts/activate
         python --version
-        uv pip install -r requirements.txt -r requirements_test.txt
-        uv pip install -e .
+        pip install -r requirements.txt -r requirements_test.txt
+        pip install -e .

.github/copilot-instructions.md

@@ -1 +1 @@
-../AGENTS.md
+../.ai/instructions.md

.github/dependabot.yml

@@ -5,7 +5,6 @@ updates:
     directory: "/"
     schedule:
       interval: daily
-    open-pull-requests-limit: 10
     ignore:
       # Hypotehsis is only used for testing and is updated quite often
       - dependency-name: hypothesis

.github/scripts/auto-label-pr/constants.js

@@ -35,9 +35,6 @@ module.exports = {
   ],
 
   DOCS_PR_PATTERNS: [
-    /https:\/\/github\.com\/esphome\/esphome\.io\/pull\/\d+/,
-    /esphome\/esphome\.io#\d+/,
-    // Keep matching the old esphome-docs name during the transition period
     /https:\/\/github\.com\/esphome\/esphome-docs\/pull\/\d+/,
     /esphome\/esphome-docs#\d+/
   ]

.github/scripts/auto-label-pr/detectors.js

@@ -107,8 +107,6 @@ async function detectNewPlatforms(github, context, prFiles, apiData) {
     /^esphome\/components\/([^\/]+)\/([^\/]+)\/__init__\.py$/,
   ];
 
-  const removedFiles = new Set(prFiles.filter(file => file.status === 'removed').map(file => file.filename));
-
   for (const file of addedFiles) {
     for (const re of platformPathPatterns) {
       const match = file.match(re);
@@ -116,12 +114,6 @@ async function detectNewPlatforms(github, context, prFiles, apiData) {
       const platform = match[2];
       if (!apiData.platformComponents.includes(platform)) break;
 
-      // Skip if this is a restructure between flat and subdirectory forms (either direction):
-      //   <component>/<platform>.py  <->  <component>/<platform>/__init__.py
-      const flatEquivalent = `esphome/components/${match[1]}/${platform}.py`;
-      const subdirEquivalent = `esphome/components/${match[1]}/${platform}/__init__.py`;
-      if (removedFiles.has(flatEquivalent) || removedFiles.has(subdirEquivalent)) break;
-
       labels.add('new-platform');
       const content = await fetchPrFileContent(github, context, file);
       if (content === null) {

.github/scripts/auto-label-pr/package.json

@@ -1,7 +0,0 @@
-{
-  "name": "auto-label-pr",
-  "private": true,
-  "scripts": {
-    "test": "node --test tests/*.test.js"
-  }
-}

.github/scripts/auto-label-pr/tests/detectors.test.js

@@ -1,147 +0,0 @@
-const { describe, it } = require('node:test');
-const assert = require('node:assert/strict');
-const { detectNewPlatforms, detectNewComponents } = require('../detectors');
-
-// Minimal GitHub API mock — only repos.getContent is called by detectNewPlatforms/detectNewComponents
-// to check for CONFIG_SCHEMA in newly added files.
-function makeGithub(content = '') {
-  return {
-    rest: {
-      repos: {
-        getContent: async () => ({
-          data: { content: Buffer.from(content).toString('base64') }
-        })
-      }
-    }
-  };
-}
-
-const CONTEXT = {
-  repo: { owner: 'esphome', repo: 'esphome' },
-  payload: { pull_request: { head: { sha: 'abc123' }, base: { ref: 'dev' } } }
-};
-
-const API_DATA = {
-  targetPlatforms: ['esp32', 'esp8266', 'rp2040'],
-  platformComponents: ['cover', 'sensor', 'binary_sensor', 'switch', 'light', 'fan', 'climate', 'valve']
-};
-
-const WITH_SCHEMA = 'CONFIG_SCHEMA = cv.Schema({})';
-const WITHOUT_SCHEMA = 'CODEOWNERS = ["@esphome/core"]';
-
-// ---------------------------------------------------------------------------
-// detectNewPlatforms
-// ---------------------------------------------------------------------------
-
-describe('detectNewPlatforms', () => {
-  describe('restructure detection (no false positives)', () => {
-    it('flat .py -> subdir __init__.py is not a new platform', async () => {
-      const prFiles = [
-        { filename: 'esphome/components/endstop/cover.py', status: 'removed' },
-        { filename: 'esphome/components/endstop/cover/__init__.py', status: 'added' },
-      ];
-      const result = await detectNewPlatforms(makeGithub(WITH_SCHEMA), CONTEXT, prFiles, API_DATA);
-      assert.equal(result.labels.size, 0);
-      assert.equal(result.hasYamlLoadable, false);
-    });
-
-    it('subdir __init__.py -> flat .py is not a new platform', async () => {
-      const prFiles = [
-        { filename: 'esphome/components/endstop/cover/__init__.py', status: 'removed' },
-        { filename: 'esphome/components/endstop/cover.py', status: 'added' },
-      ];
-      const result = await detectNewPlatforms(makeGithub(WITH_SCHEMA), CONTEXT, prFiles, API_DATA);
-      assert.equal(result.labels.size, 0);
-      assert.equal(result.hasYamlLoadable, false);
-    });
-  });
-
-  describe('genuine new platforms', () => {
-    it('new subdir platform with CONFIG_SCHEMA sets new-platform and hasYamlLoadable', async () => {
-      const prFiles = [
-        { filename: 'esphome/components/my_sensor/cover/__init__.py', status: 'added' },
-      ];
-      const result = await detectNewPlatforms(makeGithub(WITH_SCHEMA), CONTEXT, prFiles, API_DATA);
-      assert.ok(result.labels.has('new-platform'));
-      assert.equal(result.hasYamlLoadable, true);
-    });
-
-    it('new flat platform with CONFIG_SCHEMA sets new-platform and hasYamlLoadable', async () => {
-      const prFiles = [
-        { filename: 'esphome/components/my_sensor/cover.py', status: 'added' },
-      ];
-      const result = await detectNewPlatforms(makeGithub(WITH_SCHEMA), CONTEXT, prFiles, API_DATA);
-      assert.ok(result.labels.has('new-platform'));
-      assert.equal(result.hasYamlLoadable, true);
-    });
-
-    it('new platform without CONFIG_SCHEMA sets new-platform but not hasYamlLoadable', async () => {
-      const prFiles = [
-        { filename: 'esphome/components/my_sensor/cover.py', status: 'added' },
-      ];
-      const result = await detectNewPlatforms(makeGithub(WITHOUT_SCHEMA), CONTEXT, prFiles, API_DATA);
-      assert.ok(result.labels.has('new-platform'));
-      assert.equal(result.hasYamlLoadable, false);
-    });
-
-    it('non-platform file addition produces no labels', async () => {
-      const prFiles = [
-        { filename: 'esphome/components/my_sensor/sensor.py', status: 'added' },
-      ];
-      // Override platformComponents so 'sensor' is not a recognized platform -> no label expected.
-      const nonPlatformApiData = { ...API_DATA, platformComponents: ['cover'] };
-      const result = await detectNewPlatforms(makeGithub(WITH_SCHEMA), CONTEXT, prFiles, nonPlatformApiData);
-      assert.equal(result.labels.size, 0);
-      assert.equal(result.hasYamlLoadable, false);
-    });
-  });
-});
-
-// ---------------------------------------------------------------------------
-// detectNewComponents
-// ---------------------------------------------------------------------------
-
-describe('detectNewComponents', () => {
-  it('new top-level __init__.py sets new-component', async () => {
-    const prFiles = [
-      { filename: 'esphome/components/actuator/__init__.py', status: 'added', },
-    ];
-    const result = await detectNewComponents(makeGithub(WITHOUT_SCHEMA), CONTEXT, prFiles);
-    assert.ok(result.labels.has('new-component'));
-    assert.equal(result.hasYamlLoadable, false);
-  });
-
-  it('new top-level __init__.py with CONFIG_SCHEMA sets hasYamlLoadable', async () => {
-    const prFiles = [
-      { filename: 'esphome/components/my_component/__init__.py', status: 'added' },
-    ];
-    const result = await detectNewComponents(makeGithub(WITH_SCHEMA), CONTEXT, prFiles);
-    assert.ok(result.labels.has('new-component'));
-    assert.equal(result.hasYamlLoadable, true);
-  });
-
-  it('new top-level __init__.py with IS_TARGET_PLATFORM sets new-target-platform', async () => {
-    const prFiles = [
-      { filename: 'esphome/components/my_platform/__init__.py', status: 'added' },
-    ];
-    const result = await detectNewComponents(makeGithub('IS_TARGET_PLATFORM = True'), CONTEXT, prFiles);
-    assert.ok(result.labels.has('new-component'));
-    assert.ok(result.labels.has('new-target-platform'));
-  });
-
-  it('modified __init__.py does not set new-component', async () => {
-    const prFiles = [
-      { filename: 'esphome/components/existing/__init__.py', status: 'modified' },
-    ];
-    const result = await detectNewComponents(makeGithub(WITH_SCHEMA), CONTEXT, prFiles);
-    assert.equal(result.labels.size, 0);
-  });
-
-  it('nested __init__.py does not set new-component', async () => {
-    const prFiles = [
-      { filename: 'esphome/components/endstop/cover/__init__.py', status: 'added' },
-    ];
-    const result = await detectNewComponents(makeGithub(WITH_SCHEMA), CONTEXT, prFiles);
-    assert.equal(result.labels.size, 0);
-  });
-});

.github/workflows/auto-label-pr.yml

@@ -24,11 +24,11 @@ jobs:
     if: github.event.pull_request.state == 'open' && (github.event.action != 'labeled' || github.event.sender.type != 'Bot')
     steps:
       - name: Checkout
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
 
       - name: Generate a token
         id: generate-token
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
+        uses: actions/create-github-app-token@1b10c78c7865c340bc4f6099eb2f838309f1e8c3 # v3.1.1
         with:
           client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
           private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}

.github/workflows/ci-api-proto.yml

@@ -21,21 +21,11 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Set up Python
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
           python-version: "3.11"
-      - name: Set up uv
-        # ``--system`` (below) installs into the setup-python interpreter;
-        # no venv is created or restored by this workflow.
-        uses: astral-sh/setup-uv@fac544c07dec837d0ccb6301d7b5580bf5edae39 # v8.2.0
-        with:
-          enable-cache: true
-          # Pin uv version so the action does not have to fetch the
-          # manifest from raw.githubusercontent.com on every cache
-          # miss; that fetch flakes on Windows runners.
-          version: "0.11.15"
 
       - name: Install apt dependencies
         run: |
@@ -44,7 +34,7 @@ jobs:
           sudo apt install -y protobuf-compiler
           protoc --version
       - name: Install python dependencies
-        run: uv pip install --system aioesphomeapi -c requirements.txt -r requirements_dev.txt
+        run: pip install aioesphomeapi -c requirements.txt -r requirements_dev.txt
       - name: Generate files
         run: script/api_protobuf/api_protobuf.py
       - name: Check for changes

.github/workflows/ci-clang-tidy-hash.yml

@@ -21,7 +21,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
 
       - name: Set up Python
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0

.github/workflows/ci-docker.yml

@@ -42,13 +42,13 @@ jobs:
           - "docker"
           # - "lint"
     steps:
-      - uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+      - uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Set up Python
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
           python-version: "3.11"
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@d7f5e7f509e45cec5c76c4d5afdd7de93d0b3df5 # v4.1.0
+        uses: docker/setup-buildx-action@4d04d5d9486b7bd6fa91e7baf45bbb4f8b9deedd # v4.0.0
 
       - name: Set TAG
         run: |

.github/workflows/ci-github-scripts.yml

@@ -1,27 +0,0 @@
-name: CI - GitHub Scripts
-
-on:
-  push:
-    branches: [dev, beta, release]
-    paths:
-      - ".github/scripts/**"
-      - ".github/workflows/ci-github-scripts.yml"
-  pull_request:
-    paths:
-      - ".github/scripts/**"
-      - ".github/workflows/ci-github-scripts.yml"
-
-permissions:
-  contents: read
-
-jobs:
-  test-auto-label-pr:
-    name: Test auto-label-pr scripts
-    runs-on: ubuntu-latest
-    steps:
-      - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
-
-      - name: Run tests
-        working-directory: .github/scripts/auto-label-pr
-        run: npm test

.github/workflows/ci-memory-impact-comment.yml

@@ -49,7 +49,7 @@ jobs:
 
       - name: Check out code from base repository
         if: steps.pr.outputs.skip != 'true'
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           # Always check out from the base repository (esphome/esphome), never from forks
           # Use the PR's target branch to ensure we run trusted code from the main repo

.github/workflows/ci.yml

@@ -6,6 +6,14 @@ on:
     branches: [dev, beta, release]
 
   pull_request:
+    paths:
+      - "**"
+      - "!.github/workflows/*.yml"
+      - "!.github/actions/build-image/*"
+      - ".github/workflows/ci.yml"
+      - "!.yamllint"
+      - "!.github/dependabot.yml"
+      - "!docker/**"
   merge_group:
 
 permissions:
@@ -28,7 +36,7 @@ jobs:
       cache-key: ${{ steps.cache-key.outputs.key }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Generate cache-key
         id: cache-key
         run: echo key="${{ hashFiles('requirements.txt', 'requirements_dev.txt', 'requirements_test.txt', '.pre-commit-config.yaml') }}" >> $GITHUB_OUTPUT
@@ -44,26 +52,14 @@ jobs:
           path: venv
           # yamllint disable-line rule:line-length
           key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-venv-${{ steps.cache-key.outputs.key }}
-      - name: Set up uv
-        # Only needed on cache miss to populate the venv. ``uv pip install``
-        # detects the activated venv via ``VIRTUAL_ENV`` so downstream jobs
-        # that ``. venv/bin/activate`` see an identical layout.
-        if: steps.cache-venv.outputs.cache-hit != 'true'
-        uses: astral-sh/setup-uv@fac544c07dec837d0ccb6301d7b5580bf5edae39 # v8.2.0
-        with:
-          enable-cache: true
-          # Pin uv version so the action does not have to fetch the
-          # manifest from raw.githubusercontent.com on every cache
-          # miss; that fetch flakes on Windows runners.
-          version: "0.11.15"
       - name: Create Python virtual environment
         if: steps.cache-venv.outputs.cache-hit != 'true'
         run: |
           python -m venv venv
           . venv/bin/activate
           python --version
-          uv pip install -r requirements.txt -r requirements_dev.txt -r requirements_test.txt pre-commit
-          uv pip install -e .
+          pip install -r requirements.txt -r requirements_dev.txt -r requirements_test.txt pre-commit
+          pip install -e .
 
   pylint:
     name: Check pylint
@@ -74,7 +70,7 @@ jobs:
     if: needs.determine-jobs.outputs.python-linters == 'true'
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -93,11 +89,9 @@ jobs:
     runs-on: ubuntu-24.04
     needs:
       - common
-      - determine-jobs
-    if: needs.determine-jobs.outputs.core-ci == 'true'
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -113,7 +107,6 @@ jobs:
           script/build_language_schema.py --check
           script/generate-esp32-boards.py --check
           script/generate-rp2040-boards.py --check
-          script/ci_check_duplicate_test_ids.py
 
   import-time:
     name: Check import esphome.__main__ time
@@ -124,7 +117,7 @@ jobs:
     if: needs.determine-jobs.outputs.import-time == 'true'
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -152,11 +145,11 @@ jobs:
     if: needs.determine-jobs.outputs.device-builder == 'true'
     steps:
       - name: Check out esphome (this PR)
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           path: esphome
       - name: Check out esphome/device-builder
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           repository: esphome/device-builder
           ref: main
@@ -171,13 +164,9 @@ jobs:
         # install step (order-of-magnitude faster on cold boots,
         # with its own wheel cache). actions/setup-python still
         # provides the interpreter.
-        uses: astral-sh/setup-uv@fac544c07dec837d0ccb6301d7b5580bf5edae39 # v8.2.0
+        uses: astral-sh/setup-uv@08807647e7069bb48b6ef5acd8ec9567f424441b # v8.1.0
         with:
           enable-cache: true
-          # Pin uv version so the action does not have to fetch the
-          # manifest from raw.githubusercontent.com on every cache
-          # miss; that fetch flakes on Windows runners.
-          version: "0.11.15"
       - name: Install device-builder + esphome from PR
         # Install device-builder with its esphome + test extras
         # first so its pinned versions of pytest/etc. land, then
@@ -190,12 +179,9 @@ jobs:
       - name: Run device-builder pytest
         # ``-n auto`` runs under pytest-xdist (matches device-builder's
         # own CI). No ``--cov`` here -- this is purely a downstream
-        # smoke check against this PR's esphome code. ``tests/e2e/slow``
-        # is excluded: those are real multi-minute toolchain compiles
-        # (LibreTiny SDK clone, native ESP-IDF install) that device-builder
-        # runs in its own dedicated jobs, not this smoke check.
+        # smoke check against this PR's esphome code.
         working-directory: device-builder
-        run: pytest -q -n auto --maxfail=5 --durations=30 --no-cov --ignore=tests/benchmarks --ignore=tests/e2e/slow
+        run: pytest -q -n auto --maxfail=5 --durations=10 --no-cov --ignore=tests/benchmarks
 
   pytest:
     name: Run pytest
@@ -221,11 +207,9 @@ jobs:
     runs-on: ${{ matrix.os }}
     needs:
       - common
-      - determine-jobs
-    if: needs.determine-jobs.outputs.core-ci == 'true'
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Restore Python
         id: restore-python
         uses: ./.github/actions/restore-python
@@ -238,14 +222,14 @@ jobs:
         if: matrix.os == 'windows-latest'
         run: |
           . ./venv/Scripts/activate.ps1
-          pytest -vv --cov-report=xml --tb=native --durations=30 -n auto tests --ignore=tests/integration/
+          pytest -vv --cov-report=xml --tb=native -n auto tests --ignore=tests/integration/
       - name: Run pytest
         if: matrix.os == 'ubuntu-latest' || matrix.os == 'macOS-latest'
         run: |
           . venv/bin/activate
-          pytest -vv --cov-report=xml --tb=native --durations=30 -n auto tests --ignore=tests/integration/
+          pytest -vv --cov-report=xml --tb=native -n auto tests --ignore=tests/integration/
       - name: Upload coverage to Codecov
-        uses: codecov/codecov-action@fb8b3582c8e4def4969c97caa2f19720cb33a72f # v7.0.0
+        uses: codecov/codecov-action@57e3a136b779b570ffcdbf80b3bdc90e7fab3de2 # v6.0.0
         with:
           token: ${{ secrets.CODECOV_TOKEN }}
       - name: Save Python virtual environment cache
@@ -261,17 +245,13 @@ jobs:
     needs:
       - common
     outputs:
-      core-ci: ${{ steps.determine.outputs.core-ci }}
       integration-tests: ${{ steps.determine.outputs.integration-tests }}
       integration-test-buckets: ${{ steps.determine.outputs.integration-test-buckets }}
       clang-tidy: ${{ steps.determine.outputs.clang-tidy }}
       clang-tidy-mode: ${{ steps.determine.outputs.clang-tidy-mode }}
-      clang-tidy-full-scan: ${{ steps.determine.outputs.clang-tidy-full-scan }}
       python-linters: ${{ steps.determine.outputs.python-linters }}
       import-time: ${{ steps.determine.outputs.import-time }}
       device-builder: ${{ steps.determine.outputs.device-builder }}
-      native-idf: ${{ steps.determine.outputs.native-idf }}
-      native-idf-components: ${{ steps.determine.outputs.native-idf-components }}
       changed-components: ${{ steps.determine.outputs.changed-components }}
       changed-components-with-tests: ${{ steps.determine.outputs.changed-components-with-tests }}
       directly-changed-components-with-tests: ${{ steps.determine.outputs.directly-changed-components-with-tests }}
@@ -281,11 +261,10 @@ jobs:
       cpp-unit-tests-run-all: ${{ steps.determine.outputs.cpp-unit-tests-run-all }}
       cpp-unit-tests-components: ${{ steps.determine.outputs.cpp-unit-tests-components }}
       component-test-batches: ${{ steps.determine.outputs.component-test-batches }}
-      validate-only-components: ${{ steps.determine.outputs.validate-only-components }}
       benchmarks: ${{ steps.determine.outputs.benchmarks }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           # Fetch enough history to find the merge base
           fetch-depth: 2
@@ -305,27 +284,18 @@ jobs:
           GH_TOKEN: ${{ github.token }}
         run: |
           . venv/bin/activate
-          EXTRA_ARGS=""
-          if [[ "${{ contains(github.event.pull_request.labels.*.name, 'ci-run-all') }}" == "true" ]]; then
-            EXTRA_ARGS="--force-all"
-            echo "::notice::ci-run-all label detected -- forcing every CI job to run"
-          fi
-          output=$(python script/determine-jobs.py $EXTRA_ARGS)
+          output=$(python script/determine-jobs.py)
           echo "Test determination output:"
           echo "$output" | jq
 
           # Extract individual fields
-          echo "core-ci=$(echo "$output" | jq -r '.core_ci')" >> $GITHUB_OUTPUT
           echo "integration-tests=$(echo "$output" | jq -r '.integration_tests')" >> $GITHUB_OUTPUT
           echo "integration-test-buckets=$(echo "$output" | jq -c '.integration_test_buckets')" >> $GITHUB_OUTPUT
           echo "clang-tidy=$(echo "$output" | jq -r '.clang_tidy')" >> $GITHUB_OUTPUT
           echo "clang-tidy-mode=$(echo "$output" | jq -r '.clang_tidy_mode')" >> $GITHUB_OUTPUT
-          echo "clang-tidy-full-scan=$(echo "$output" | jq -r '.clang_tidy_full_scan')" >> $GITHUB_OUTPUT
           echo "python-linters=$(echo "$output" | jq -r '.python_linters')" >> $GITHUB_OUTPUT
           echo "import-time=$(echo "$output" | jq -r '.import_time')" >> $GITHUB_OUTPUT
           echo "device-builder=$(echo "$output" | jq -r '.device_builder')" >> $GITHUB_OUTPUT
-          echo "native-idf=$(echo "$output" | jq -r '.native_idf')" >> $GITHUB_OUTPUT
-          echo "native-idf-components=$(echo "$output" | jq -r '.native_idf_components')" >> $GITHUB_OUTPUT
           echo "changed-components=$(echo "$output" | jq -c '.changed_components')" >> $GITHUB_OUTPUT
           echo "changed-components-with-tests=$(echo "$output" | jq -c '.changed_components_with_tests')" >> $GITHUB_OUTPUT
           echo "directly-changed-components-with-tests=$(echo "$output" | jq -c '.directly_changed_components_with_tests')" >> $GITHUB_OUTPUT
@@ -335,7 +305,6 @@ jobs:
           echo "cpp-unit-tests-run-all=$(echo "$output" | jq -r '.cpp_unit_tests_run_all')" >> $GITHUB_OUTPUT
           echo "cpp-unit-tests-components=$(echo "$output" | jq -c '.cpp_unit_tests_components')" >> $GITHUB_OUTPUT
           echo "component-test-batches=$(echo "$output" | jq -c '.component_test_batches')" >> $GITHUB_OUTPUT
-          echo "validate-only-components=$(echo "$output" | jq -c '.validate_only_components')" >> $GITHUB_OUTPUT
           echo "benchmarks=$(echo "$output" | jq -r '.benchmarks')" >> $GITHUB_OUTPUT
       - name: Save components graph cache
         if: github.ref == 'refs/heads/dev'
@@ -357,7 +326,7 @@ jobs:
         bucket: ${{ fromJson(needs.determine-jobs.outputs.integration-test-buckets) }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Set up Python 3.13
         id: python
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
@@ -369,24 +338,14 @@ jobs:
         with:
           path: venv
           key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-venv-${{ needs.common.outputs.cache-key }}
-      - name: Set up uv
-        # Only needed on cache miss to populate the venv.
-        if: steps.cache-venv.outputs.cache-hit != 'true'
-        uses: astral-sh/setup-uv@fac544c07dec837d0ccb6301d7b5580bf5edae39 # v8.2.0
-        with:
-          enable-cache: true
-          # Pin uv version so the action does not have to fetch the
-          # manifest from raw.githubusercontent.com on every cache
-          # miss; that fetch flakes on Windows runners.
-          version: "0.11.15"
       - name: Create Python virtual environment
         if: steps.cache-venv.outputs.cache-hit != 'true'
         run: |
           python -m venv venv
           . venv/bin/activate
           python --version
-          uv pip install -r requirements.txt -r requirements_test.txt
-          uv pip install -e .
+          pip install -r requirements.txt -r requirements_test.txt
+          pip install -e .
       - name: Register matcher
         run: echo "::add-matcher::.github/workflows/matchers/pytest.json"
       - name: Run integration tests
@@ -398,7 +357,7 @@ jobs:
           . venv/bin/activate
           mapfile -t test_files < <(echo "$BUCKET_TESTS" | jq -r '.[]')
           echo "Bucket ${{ matrix.bucket.name }}: running ${#test_files[@]} integration tests"
-          pytest -vv --no-cov --tb=native --durations=30 -n auto "${test_files[@]}"
+          pytest -vv --no-cov --tb=native -n auto "${test_files[@]}"
 
   cpp-unit-tests:
     name: Run C++ unit tests
@@ -409,7 +368,7 @@ jobs:
     if: github.event_name == 'pull_request' && (needs.determine-jobs.outputs.cpp-unit-tests-run-all == 'true' || needs.determine-jobs.outputs.cpp-unit-tests-components != '[]')
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
 
       - name: Restore Python
         uses: ./.github/actions/restore-python
@@ -438,7 +397,7 @@ jobs:
       (github.event_name == 'pull_request' && needs.determine-jobs.outputs.benchmarks == 'true')
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
 
       - name: Restore Python
         uses: ./.github/actions/restore-python
@@ -456,12 +415,9 @@ jobs:
           echo "binary=$BINARY" >> $GITHUB_OUTPUT
 
       - name: Run CodSpeed benchmarks
-        uses: CodSpeedHQ/action@c145068895e045cc725ee76fcd2307624b65c3af # v4.17.5
+        uses: CodSpeedHQ/action@3194d9a39c4d46684cb44bf7207fc56626aad8fd # v4.15.1
         with:
-          run: |
-            . venv/bin/activate
-            ${{ steps.build.outputs.binary }}
-            pytest tests/benchmarks/python/ --codspeed --no-cov
+          run: ${{ steps.build.outputs.binary }}
           mode: simulation
 
   clang-tidy-single:
@@ -473,8 +429,6 @@ jobs:
     if: needs.determine-jobs.outputs.clang-tidy == 'true'
     env:
       GH_TOKEN: ${{ github.token }}
-      # esp32-arduino-tidy installs ESP-IDF natively; share the native IDF cache.
-      ESPHOME_ESP_IDF_PREFIX: ~/.esphome-idf
     strategy:
       fail-fast: false
       max-parallel: 2
@@ -485,9 +439,9 @@ jobs:
             options: --environment esp8266-arduino-tidy --grep USE_ESP8266
             pio_cache_key: tidyesp8266
           - id: clang-tidy
-            name: Run script/clang-tidy for ESP32 Arduino
-            options: --environment esp32-arduino-tidy --grep USE_ARDUINO
-            cache_idf: true
+            name: Run script/clang-tidy for ESP32 IDF
+            options: --environment esp32-idf-tidy --grep USE_ESP_IDF
+            pio_cache_key: tidyesp32-idf
           - id: clang-tidy
             name: Run script/clang-tidy for ZEPHYR
             options: --environment nrf52-tidy --grep USE_ZEPHYR --grep USE_NRF52
@@ -496,7 +450,7 @@ jobs:
 
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           # Need history for HEAD~1 to work for checking changed files
           fetch-depth: 2
@@ -508,42 +462,36 @@ jobs:
           cache-key: ${{ needs.common.outputs.cache-key }}
 
       - name: Cache platformio
-        if: github.ref == 'refs/heads/dev' && matrix.pio_cache_key
+        if: github.ref == 'refs/heads/dev'
         uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: ~/.platformio
           key: platformio-${{ matrix.pio_cache_key }}-${{ hashFiles('platformio.ini') }}
 
       - name: Cache platformio
-        if: github.ref != 'refs/heads/dev' && matrix.pio_cache_key
+        if: github.ref != 'refs/heads/dev'
         uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
         with:
           path: ~/.platformio
           key: platformio-${{ matrix.pio_cache_key }}-${{ hashFiles('platformio.ini') }}
 
-      - name: Cache ESP-IDF install
-        # Shared with the IDF tidy + native-IDF build jobs (same install).
-        if: matrix.cache_idf
-        uses: ./.github/actions/cache-esp-idf
-        with:
-          framework: arduino
-
       - name: Register problem matchers
         run: |
           echo "::add-matcher::.github/workflows/matchers/gcc.json"
           echo "::add-matcher::.github/workflows/matchers/clang-tidy.json"
 
+      - name: Run 'pio run --list-targets -e esp32-idf-tidy'
+        if: matrix.name == 'Run script/clang-tidy for ESP32 IDF'
+        run: |
+          . venv/bin/activate
+          mkdir -p .temp
+          pio run --list-targets -e esp32-idf-tidy
+
       - name: Check if full clang-tidy scan needed
         id: check_full_scan
         run: |
           . venv/bin/activate
-          # determine-jobs.clang-tidy-full-scan is true when core C++ changed
-          # OR the ci-run-all label forced --force-all. Independent of the
-          # hash check, both must produce a full scan in the job itself.
-          if [ "${{ needs.determine-jobs.outputs.clang-tidy-full-scan }}" = "true" ]; then
-            echo "full_scan=true" >> $GITHUB_OUTPUT
-            echo "reason=determine_jobs" >> $GITHUB_OUTPUT
-          elif python script/clang_tidy_hash.py --check; then
+          if python script/clang_tidy_hash.py --check; then
             echo "full_scan=true" >> $GITHUB_OUTPUT
             echo "reason=hash_changed" >> $GITHUB_OUTPUT
           else
@@ -555,7 +503,7 @@ jobs:
         run: |
           . venv/bin/activate
           if [ "${{ steps.check_full_scan.outputs.full_scan }}" = "true" ]; then
-            echo "Running FULL clang-tidy scan (reason: ${{ steps.check_full_scan.outputs.reason }})"
+            echo "Running FULL clang-tidy scan (hash changed)"
             script/clang-tidy --all-headers --fix ${{ matrix.options }} ${{ matrix.ignore_errors && '|| true' || '' }}
           else
             echo "Running clang-tidy on changed files only"
@@ -571,7 +519,7 @@ jobs:
         if: always()
 
   clang-tidy-nosplit:
-    name: Run script/clang-tidy for ESP32 IDF
+    name: Run script/clang-tidy for ESP32 Arduino
     runs-on: ubuntu-24.04
     needs:
       - common
@@ -579,11 +527,9 @@ jobs:
     if: needs.determine-jobs.outputs.clang-tidy-mode == 'nosplit'
     env:
       GH_TOKEN: ${{ github.token }}
-      # esp32-idf-tidy installs ESP-IDF natively; share the native IDF cache.
-      ESPHOME_ESP_IDF_PREFIX: ~/.esphome-idf
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           # Need history for HEAD~1 to work for checking changed files
           fetch-depth: 2
@@ -594,9 +540,19 @@ jobs:
           python-version: ${{ env.DEFAULT_PYTHON }}
           cache-key: ${{ needs.common.outputs.cache-key }}
 
-      - name: Cache ESP-IDF install
-        # Shared with the Arduino tidy + native-IDF build jobs (same install).
-        uses: ./.github/actions/cache-esp-idf
+      - name: Cache platformio
+        if: github.ref == 'refs/heads/dev'
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
+        with:
+          path: ~/.platformio
+          key: platformio-tidyesp32-${{ hashFiles('platformio.ini') }}
+
+      - name: Cache platformio
+        if: github.ref != 'refs/heads/dev'
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
+        with:
+          path: ~/.platformio
+          key: platformio-tidyesp32-${{ hashFiles('platformio.ini') }}
 
       - name: Register problem matchers
         run: |
@@ -607,13 +563,7 @@ jobs:
         id: check_full_scan
         run: |
           . venv/bin/activate
-          # determine-jobs.clang-tidy-full-scan is true when core C++ changed
-          # OR the ci-run-all label forced --force-all. Independent of the
-          # hash check, both must produce a full scan in the job itself.
-          if [ "${{ needs.determine-jobs.outputs.clang-tidy-full-scan }}" = "true" ]; then
-            echo "full_scan=true" >> $GITHUB_OUTPUT
-            echo "reason=determine_jobs" >> $GITHUB_OUTPUT
-          elif python script/clang_tidy_hash.py --check; then
+          if python script/clang_tidy_hash.py --check; then
             echo "full_scan=true" >> $GITHUB_OUTPUT
             echo "reason=hash_changed" >> $GITHUB_OUTPUT
           else
@@ -625,11 +575,11 @@ jobs:
         run: |
           . venv/bin/activate
           if [ "${{ steps.check_full_scan.outputs.full_scan }}" = "true" ]; then
-            echo "Running FULL clang-tidy scan (reason: ${{ steps.check_full_scan.outputs.reason }})"
-            script/clang-tidy --all-headers --fix --environment esp32-idf-tidy
+            echo "Running FULL clang-tidy scan (hash changed)"
+            script/clang-tidy --all-headers --fix --environment esp32-arduino-tidy
           else
             echo "Running clang-tidy on changed files only"
-            script/clang-tidy --all-headers --fix --changed --environment esp32-idf-tidy
+            script/clang-tidy --all-headers --fix --changed --environment esp32-arduino-tidy
           fi
         env:
           # Also cache libdeps, store them in a ~/.platformio subfolder
@@ -648,26 +598,27 @@ jobs:
     if: needs.determine-jobs.outputs.clang-tidy-mode == 'split'
     env:
       GH_TOKEN: ${{ github.token }}
-      # esp32-idf-tidy installs ESP-IDF natively; share the native IDF cache.
-      ESPHOME_ESP_IDF_PREFIX: ~/.esphome-idf
     strategy:
       fail-fast: false
-      max-parallel: 3
+      max-parallel: 2
       matrix:
         include:
           - id: clang-tidy
-            name: Run script/clang-tidy for ESP32 IDF 1/3
-            options: --environment esp32-idf-tidy --split-num 3 --split-at 1
+            name: Run script/clang-tidy for ESP32 Arduino 1/4
+            options: --environment esp32-arduino-tidy --split-num 4 --split-at 1
           - id: clang-tidy
-            name: Run script/clang-tidy for ESP32 IDF 2/3
-            options: --environment esp32-idf-tidy --split-num 3 --split-at 2
+            name: Run script/clang-tidy for ESP32 Arduino 2/4
+            options: --environment esp32-arduino-tidy --split-num 4 --split-at 2
           - id: clang-tidy
-            name: Run script/clang-tidy for ESP32 IDF 3/3
-            options: --environment esp32-idf-tidy --split-num 3 --split-at 3
+            name: Run script/clang-tidy for ESP32 Arduino 3/4
+            options: --environment esp32-arduino-tidy --split-num 4 --split-at 3
+          - id: clang-tidy
+            name: Run script/clang-tidy for ESP32 Arduino 4/4
+            options: --environment esp32-arduino-tidy --split-num 4 --split-at 4
 
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           # Need history for HEAD~1 to work for checking changed files
           fetch-depth: 2
@@ -678,9 +629,19 @@ jobs:
           python-version: ${{ env.DEFAULT_PYTHON }}
           cache-key: ${{ needs.common.outputs.cache-key }}
 
-      - name: Cache ESP-IDF install
-        # Shared with the Arduino tidy + native-IDF build jobs (same install).
-        uses: ./.github/actions/cache-esp-idf
+      - name: Cache platformio
+        if: github.ref == 'refs/heads/dev'
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
+        with:
+          path: ~/.platformio
+          key: platformio-tidyesp32-${{ hashFiles('platformio.ini') }}
+
+      - name: Cache platformio
+        if: github.ref != 'refs/heads/dev'
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
+        with:
+          path: ~/.platformio
+          key: platformio-tidyesp32-${{ hashFiles('platformio.ini') }}
 
       - name: Register problem matchers
         run: |
@@ -691,13 +652,7 @@ jobs:
         id: check_full_scan
         run: |
           . venv/bin/activate
-          # determine-jobs.clang-tidy-full-scan is true when core C++ changed
-          # OR the ci-run-all label forced --force-all. Independent of the
-          # hash check, both must produce a full scan in the job itself.
-          if [ "${{ needs.determine-jobs.outputs.clang-tidy-full-scan }}" = "true" ]; then
-            echo "full_scan=true" >> $GITHUB_OUTPUT
-            echo "reason=determine_jobs" >> $GITHUB_OUTPUT
-          elif python script/clang_tidy_hash.py --check; then
+          if python script/clang_tidy_hash.py --check; then
             echo "full_scan=true" >> $GITHUB_OUTPUT
             echo "reason=hash_changed" >> $GITHUB_OUTPUT
           else
@@ -709,7 +664,7 @@ jobs:
         run: |
           . venv/bin/activate
           if [ "${{ steps.check_full_scan.outputs.full_scan }}" = "true" ]; then
-            echo "Running FULL clang-tidy scan (reason: ${{ steps.check_full_scan.outputs.reason }})"
+            echo "Running FULL clang-tidy scan (hash changed)"
             script/clang-tidy --all-headers --fix ${{ matrix.options }}
           else
             echo "Running clang-tidy on changed files only"
@@ -723,93 +678,6 @@ jobs:
         run: script/ci-suggest-changes
         if: always()
 
-  clang-tidy-esp32-variants:
-    name: ${{ matrix.name }}
-    runs-on: ubuntu-24.04
-    needs:
-      - common
-      - determine-jobs
-    if: needs.determine-jobs.outputs.clang-tidy == 'true'
-    env:
-      GH_TOKEN: ${{ github.token }}
-      # The variant tidy envs install ESP-IDF natively; share the native IDF cache.
-      ESPHOME_ESP_IDF_PREFIX: ~/.esphome-idf
-    strategy:
-      fail-fast: false
-      max-parallel: 3
-      matrix:
-        include:
-          - id: clang-tidy
-            name: Run script/clang-tidy for ESP32 S3
-            options: --environment esp32s3-idf-tidy --grep USE_ESP32_VARIANT_ESP32S3
-          - id: clang-tidy
-            name: Run script/clang-tidy for ESP32 P4
-            # P4 has no native Wi-Fi/BLE; those run over the hosted co-processor,
-            # so their code paths differ -- lint them under the P4 build too.
-            # yamllint disable-line rule:line-length
-            options: --environment esp32p4-idf-tidy --grep USE_ESP32_VARIANT_ESP32P4 --grep USE_ESP32_HOSTED --grep USE_WIFI --grep USE_BLE
-          - id: clang-tidy
-            name: Run script/clang-tidy for ESP32 C6
-            # yamllint disable-line rule:line-length
-            options: --environment esp32c6-idf-tidy --grep USE_ESP32_VARIANT_ESP32C6 --grep USE_OPENTHREAD --grep USE_ZIGBEE
-
-    steps:
-      - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
-        with:
-          # Need history for HEAD~1 to work for checking changed files
-          fetch-depth: 2
-
-      - name: Restore Python
-        uses: ./.github/actions/restore-python
-        with:
-          python-version: ${{ env.DEFAULT_PYTHON }}
-          cache-key: ${{ needs.common.outputs.cache-key }}
-
-      - name: Cache ESP-IDF install
-        # Shared with the IDF/Arduino clang-tidy jobs + native-IDF build (same install).
-        uses: ./.github/actions/cache-esp-idf
-
-      - name: Register problem matchers
-        run: |
-          echo "::add-matcher::.github/workflows/matchers/gcc.json"
-          echo "::add-matcher::.github/workflows/matchers/clang-tidy.json"
-
-      - name: Check if full clang-tidy scan needed
-        id: check_full_scan
-        run: |
-          . venv/bin/activate
-          # determine-jobs.clang-tidy-full-scan is true when core C++ changed
-          # OR the ci-run-all label forced --force-all. Independent of the
-          # hash check, both must produce a full scan in the job itself.
-          if [ "${{ needs.determine-jobs.outputs.clang-tidy-full-scan }}" = "true" ]; then
-            echo "full_scan=true" >> $GITHUB_OUTPUT
-            echo "reason=determine_jobs" >> $GITHUB_OUTPUT
-          elif python script/clang_tidy_hash.py --check; then
-            echo "full_scan=true" >> $GITHUB_OUTPUT
-            echo "reason=hash_changed" >> $GITHUB_OUTPUT
-          else
-            echo "full_scan=false" >> $GITHUB_OUTPUT
-            echo "reason=normal" >> $GITHUB_OUTPUT
-          fi
-
-      - name: Run clang-tidy
-        # Limited variant scan: only the files carrying that variant's code paths
-        # (no --all-headers; the comprehensive esp32-idf pass covers the shared tree).
-        run: |
-          . venv/bin/activate
-          if [ "${{ steps.check_full_scan.outputs.full_scan }}" = "true" ]; then
-            echo "Running FULL clang-tidy scan (reason: ${{ steps.check_full_scan.outputs.reason }})"
-            script/clang-tidy --fix ${{ matrix.options }}
-          else
-            echo "Running clang-tidy on changed files only"
-            script/clang-tidy --fix --changed ${{ matrix.options }}
-          fi
-
-      - name: Suggested changes
-        run: script/ci-suggest-changes
-        if: always()
-
   test-build-components-split:
     name: Test components batch (${{ matrix.components }})
     runs-on: ubuntu-24.04
@@ -838,7 +706,7 @@ jobs:
           version: 1.0
 
       - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -895,7 +763,7 @@ jobs:
           fi
           echo ""
 
-          # Show disk space before validation
+          # Show disk space before validation (after bind mounts setup)
           echo "Disk space before config validation:"
           df -h
           echo ""
@@ -907,45 +775,13 @@ jobs:
           echo "Config validation passed! Starting compilation..."
           echo ""
 
-          # Compute the compile-stage component list. Components whose only
-          # changes are validate.*.yaml files are config-only -- their source
-          # and test fixtures didn't move, so rebuilding firmware adds no
-          # signal. Subtract them from this batch before invoking compile.
-          validate_only_json='${{ needs.determine-jobs.outputs.validate-only-components }}'
-          if [ -z "$validate_only_json" ]; then
-            validate_only_json='[]'
-          fi
-          if ! validate_only_csv=$(echo "$validate_only_json" | jq -r 'join(",")'); then
-            echo "::error::Failed to render validate-only-components as CSV from: $validate_only_json"
-            exit 1
-          fi
-          if [ -z "$validate_only_csv" ]; then
-            compile_csv="$components_csv"
-          else
-            components_sorted=$(echo "$components_csv" | tr ',' '\n' | sort -u)
-            validate_sorted=$(echo "$validate_only_csv" | tr ',' '\n' | sort -u)
-            if ! diff_out=$(comm -23 <(echo "$components_sorted") <(echo "$validate_sorted")); then
-              echo "::error::Failed to compute compile component subset."
-              exit 1
-            fi
-            compile_csv=$(echo "$diff_out" | paste -sd ',' -)
-            skipped=$(comm -12 <(echo "$components_sorted") <(echo "$validate_sorted") | paste -sd ',' -)
-            if [ -n "$skipped" ]; then
-              echo "Validate-only components in this batch (skipping compile): $skipped"
-            fi
-          fi
-
           # Show disk space before compilation
           echo "Disk space before compilation:"
           df -h
           echo ""
 
-          if [ -n "$compile_csv" ]; then
-            # Run compilation with grouping and isolation
-            python3 script/test_build_components.py -e compile -c "$compile_csv" -f --isolate "$directly_changed_csv"
-          else
-            echo "All components in this batch are validate-only -- skipping compile stage."
-          fi
+          # Run compilation with grouping and isolation
+          python3 script/test_build_components.py -e compile -c "$components_csv" -f --isolate "$directly_changed_csv"
 
   test-native-idf:
     name: Test components with native ESP-IDF
@@ -953,17 +789,13 @@ jobs:
     needs:
       - common
       - determine-jobs
-    if: github.event_name == 'pull_request' && needs.determine-jobs.outputs.native-idf == 'true'
+    if: github.event_name == 'pull_request'
     env:
       ESPHOME_ESP_IDF_PREFIX: ~/.esphome-idf
-      # Comma-joined subset of the native-IDF representative component list,
-      # computed by script/determine-jobs.py (native_idf_components_to_test).
-      # Single source of truth -- the full list lives in
-      # script/determine-jobs.py::NATIVE_IDF_TEST_COMPONENTS.
-      TEST_COMPONENTS: ${{ needs.determine-jobs.outputs.native-idf-components }}
+      TEST_COMPONENTS: esp32,api,heatpumpir,bme280_i2c,bh1750,aht10,esp32_ble,esp32_ble_beacon,esp32_ble_client,esp32_ble_server,esp32_ble_tracker,ble_client,ble_presence,ble_rssi,ble_scanner
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
 
       - name: Restore Python
         uses: ./.github/actions/restore-python
@@ -971,20 +803,33 @@ jobs:
           python-version: ${{ env.DEFAULT_PYTHON }}
           cache-key: ${{ needs.common.outputs.cache-key }}
 
-      - name: Prepare build storage on /mnt
-        # Bind-mount the larger /mnt disk over the IDF install + build dirs BEFORE
-        # restoring the cache, so the ~4.5GB restore lands on the roomier volume
-        # instead of being shadowed by a mount set up later in the run step.
+      - name: Cache ESPHome
+        uses: actions/cache@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 # v5.0.3
+        with:
+          path: ~/.esphome-idf
+          key: ${{ runner.os }}-esphome-${{ needs.common.outputs.cache-key }}
+
+      - name: Run native ESP-IDF compile test
         run: |
+          . venv/bin/activate
+
+          # Check if /mnt has more free space than / before bind mounting
+          # Extract available space in KB for comparison
           root_avail=$(df -k / | awk 'NR==2 {print $4}')
           mnt_avail=$(df -k /mnt 2>/dev/null | awk 'NR==2 {print $4}')
+
           echo "Available space: / has ${root_avail}KB, /mnt has ${mnt_avail}KB"
+
+          # Only use /mnt if it has more space than /
           if [ -n "$mnt_avail" ] && [ "$mnt_avail" -gt "$root_avail" ]; then
             echo "Using /mnt for build files (more space available)"
+            # Bind mount PlatformIO directory to /mnt (tools, packages, build cache all go there)
             sudo mkdir -p /mnt/esphome-idf
             sudo chown $USER:$USER /mnt/esphome-idf
             mkdir -p ~/.esphome-idf
             sudo mount --bind /mnt/esphome-idf ~/.esphome-idf
+
+            # Bind mount test build directory to /mnt
             sudo mkdir -p /mnt/test_build_components_build
             sudo chown $USER:$USER /mnt/test_build_components_build
             mkdir -p tests/test_build_components/build
@@ -993,19 +838,10 @@ jobs:
             echo "Using / for build files (more space available than /mnt or /mnt unavailable)"
           fi
 
-      - name: Cache ESP-IDF install
-        # Shared with the IDF/Arduino clang-tidy jobs (same install); restores
-        # into the /mnt bind-mount prepared above when present.
-        uses: ./.github/actions/cache-esp-idf
-
-      - name: Run native ESP-IDF compile test
-        run: |
-          . venv/bin/activate
-
           echo "Testing components: $TEST_COMPONENTS"
           echo ""
 
-          # Show disk space before validation
+          # Show disk space before validation (after bind mounts setup)
           echo "Disk space before config validation:"
           df -h
           echo ""
@@ -1027,7 +863,7 @@ jobs:
 
       - name: Save ESPHome cache
         if: github.ref == 'refs/heads/dev'
-        uses: actions/cache/save@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
+        uses: actions/cache/save@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 # v5.0.3
         with:
           path: ~/.esphome-idf
           key: ${{ runner.os }}-esphome-${{ needs.common.outputs.cache-key }}
@@ -1037,11 +873,10 @@ jobs:
     runs-on: ubuntu-latest
     needs:
       - common
-      - determine-jobs
-    if: github.event_name == 'pull_request' && !startsWith(github.base_ref, 'beta') && !startsWith(github.base_ref, 'release') && needs.determine-jobs.outputs.core-ci == 'true'
+    if: github.event_name == 'pull_request' && !startsWith(github.base_ref, 'beta') && !startsWith(github.base_ref, 'release')
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -1067,7 +902,7 @@ jobs:
       skip: ${{ steps.check-script.outputs.skip || steps.check-tests.outputs.skip }}
     steps:
       - name: Check out target branch
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           ref: ${{ github.base_ref }}
 
@@ -1249,7 +1084,7 @@ jobs:
       flash_usage: ${{ steps.extract.outputs.flash_usage }}
     steps:
       - name: Check out PR branch
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -1318,7 +1153,7 @@ jobs:
       GH_TOKEN: ${{ github.token }}
     steps:
       - name: Check out code
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -1361,7 +1196,6 @@ jobs:
       - clang-tidy-single
       - clang-tidy-nosplit
       - clang-tidy-split
-      - clang-tidy-esp32-variants
       - determine-jobs
       - device-builder
       - test-build-components-split

.github/workflows/codeowner-approved-label-update.yml

@@ -26,7 +26,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout base branch
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           ref: ${{ github.event.pull_request.base.sha }}
           sparse-checkout: |

.github/workflows/codeowner-review-request.yml

@@ -29,13 +29,13 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout base branch
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           ref: ${{ github.event.pull_request.base.sha }}
 
       - name: Generate a token
         id: generate-token
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
+        uses: actions/create-github-app-token@1b10c78c7865c340bc4f6099eb2f838309f1e8c3 # v3.1.1
         with:
           client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
           private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}

.github/workflows/codeql.yml

@@ -52,11 +52,11 @@ jobs:
             # your codebase is analyzed, see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/codeql-code-scanning-for-compiled-languages
     steps:
       - name: Checkout repository
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
 
       # Initializes the CodeQL tools for scanning.
       - name: Initialize CodeQL
-        uses: github/codeql-action/init@8aad20d150bbac5944a9f9d289da16a4b0d87c1e # v4.36.2
+        uses: github/codeql-action/init@68bde559dea0fdcac2102bfdf6230c5f70eb485e # v4.35.4
         with:
           languages: ${{ matrix.language }}
           build-mode: ${{ matrix.build-mode }}
@@ -84,6 +84,6 @@ jobs:
           exit 1
 
       - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@8aad20d150bbac5944a9f9d289da16a4b0d87c1e # v4.36.2
+        uses: github/codeql-action/analyze@68bde559dea0fdcac2102bfdf6230c5f70eb485e # v4.35.4
         with:
           category: "/language:${{matrix.language}}"

.github/workflows/dashboard-deprecation-comment.yml

@@ -1,119 +0,0 @@
-name: Add Dashboard Deprecation Comment
-
-on:
-  pull_request_target:
-    types: [opened, synchronize]
-
-# All API calls (pulls.listFiles + issues.{list,create,update}Comment) are performed with
-# the App token minted below, so the workflow's GITHUB_TOKEN does not need any scopes.
-permissions: {}
-
-jobs:
-  dashboard-deprecation-comment:
-    name: Dashboard deprecation comment
-    runs-on: ubuntu-latest
-    # Release-bump PRs (bump-X.Y.Z -> beta, beta -> release) inevitably
-    # roll up everything merged into dev since the last cut, which can
-    # include dashboard changes that have already been reviewed once.
-    # The bot's purpose is to warn new contributors before they invest
-    # time -- that only applies to PRs entering dev.
-    if: github.event.pull_request.base.ref == 'dev'
-    steps:
-      - name: Generate a token
-        id: generate-token
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
-        with:
-          client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
-          private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
-          # pulls.listFiles + issues.{list,create,update}Comment on PRs. For PR resources
-          # the issues.*Comment APIs require the pull-requests scope, not issues.
-          permission-pull-requests: write
-
-      - name: Add dashboard deprecation comment
-        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
-        with:
-          github-token: ${{ steps.generate-token.outputs.token }}
-          script: |
-            const commentMarker = "<!-- This comment was generated automatically by the dashboard-deprecation-comment workflow. -->";
-
-            const commentBody = `Thanks for opening this PR!
-
-            Heads up: the legacy ESPHome dashboard (\`esphome/dashboard/\` and \`tests/dashboard/\`) is **deprecated** and is being replaced by [ESPHome Device Builder](https://github.com/esphome/device-builder). We are not adding new features to the legacy dashboard and it will eventually be removed from this repository.
-
-            What this means for your PR:
-
-            - **New features / enhancements**: please port the change to [esphome/device-builder](https://github.com/esphome/device-builder) instead. We are unlikely to review or merge new dashboard features here.
-            - **Bug fixes**: small fixes may still be considered, but please check first whether the same issue exists in Device Builder, where the fix will have a longer life.
-            - **Security issues**: please do not file a public PR. Report privately via [GitHub security advisories](https://github.com/esphome/esphome/security/advisories/new) so we can coordinate a fix.
-
-            We appreciate the contribution and apologize for the friction; flagging this early so your time isn't spent on a change that may not land.
-
-            ---
-            (Added by the PR bot)
-
-            ${commentMarker}`;
-
-            async function getDashboardChanges(github, owner, repo, prNumber) {
-                const changedFiles = await github.paginate(
-                    github.rest.pulls.listFiles,
-                    {
-                        owner: owner,
-                        repo: repo,
-                        pull_number: prNumber,
-                        per_page: 100,
-                    }
-                );
-
-                return changedFiles.filter(file =>
-                    file.filename.startsWith('esphome/dashboard/') ||
-                    file.filename.startsWith('tests/dashboard/')
-                );
-            }
-
-            async function findBotComment(github, owner, repo, prNumber) {
-                const comments = await github.paginate(
-                    github.rest.issues.listComments,
-                    {
-                        owner: owner,
-                        repo: repo,
-                        issue_number: prNumber,
-                        per_page: 100,
-                    }
-                );
-
-                return comments.find(comment =>
-                    comment.body.includes(commentMarker) && comment.user.type === "Bot"
-                );
-            }
-
-            const prNumber = context.payload.pull_request.number;
-            const { owner, repo } = context.repo;
-
-            const dashboardChanges = await getDashboardChanges(github, owner, repo, prNumber);
-            const existingComment = await findBotComment(github, owner, repo, prNumber);
-
-            if (dashboardChanges.length === 0) {
-                // PR doesn't (or no longer) touches the legacy dashboard. If we previously
-                // commented (e.g. files were removed in a later push), leave the comment in
-                // place for history rather than thrash on edit/delete.
-                return;
-            }
-
-            if (existingComment) {
-                if (existingComment.body === commentBody) {
-                    return;
-                }
-                await github.rest.issues.updateComment({
-                    owner: owner,
-                    repo: repo,
-                    comment_id: existingComment.id,
-                    body: commentBody,
-                });
-            } else {
-                await github.rest.issues.createComment({
-                    owner: owner,
-                    repo: repo,
-                    issue_number: prNumber,
-                    body: commentBody,
-                });
-            }

.github/workflows/external-component-bot.yml

@@ -15,7 +15,7 @@ jobs:
     steps:
       - name: Generate a token
         id: generate-token
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
+        uses: actions/create-github-app-token@1b10c78c7865c340bc4f6099eb2f838309f1e8c3 # v3.1.1
         with:
           client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
           private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}

.github/workflows/pr-title-check.yml

@@ -16,7 +16,7 @@ jobs:
     name: Validate PR title
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+      - uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
 
       - uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
         with:
@@ -29,11 +29,10 @@ jobs:
             } = require('./.github/scripts/detect-tags.js');
 
             const title = context.payload.pull_request.title;
-            const user = context.payload.pull_request.user;
+            const author = context.payload.pull_request.user.login;
 
-            // Skip bot PRs (e.g. dependabot, esphome[bot] device-class sync) -
-            // they have their own title formats.
-            if (user.type === 'Bot') {
+            // Skip bot PRs (e.g. dependabot) - they have their own title format
+            if (author === 'dependabot[bot]') {
               return;
             }
 
@@ -69,15 +68,14 @@ jobs:
               return;
             }
 
-            // Check for MDX syntax characters not wrapped in backticks.
-            // Astro docs MDX treats bare `<` as JSX component opening tags and
-            // bare `{` as JS expressions, so both must be escaped in changelog entries.
+            // Check for angle brackets not wrapped in backticks.
+            // Astro docs MDX treats bare < as JSX component opening tags.
             const stripped = title.replace(/`[^`]*`/g, '');
-            if (/[<>{}]/.test(stripped)) {
+            if (/[<>]/.test(stripped)) {
               core.setFailed(
-                'PR title contains `<`, `>`, `{`, or `}` not wrapped in backticks.\n' +
-                'Astro docs MDX interprets bare `<` as JSX components and bare `{` as JS expressions.\n' +
-                'Please wrap these characters with backticks, e.g.: [component] Add `<feature>` support'
+                'PR title contains `<` or `>` not wrapped in backticks.\n' +
+                'Astro docs MDX interprets bare `<` as JSX components.\n' +
+                'Please wrap angle brackets with backticks, e.g.: [component] Add `<feature>` support'
               );
               return;
             }

.github/workflows/release.yml

@@ -20,7 +20,7 @@ jobs:
       branch_build: ${{ steps.tag.outputs.branch_build }}
       deploy_env: ${{ steps.tag.outputs.deploy_env }}
     steps:
-      - uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+      - uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Get tag
         id: tag
         # yamllint disable rule:line-length
@@ -60,7 +60,7 @@ jobs:
       contents: read   # actions/checkout to build the sdist/wheel
       id-token: write  # OIDC token for PyPI Trusted Publishing (pypa/gh-action-pypi-publish)
     steps:
-      - uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+      - uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Set up Python
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
@@ -92,22 +92,22 @@ jobs:
             os: "ubuntu-24.04-arm"
 
     steps:
-      - uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+      - uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Set up Python
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
           python-version: "3.11"
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@d7f5e7f509e45cec5c76c4d5afdd7de93d0b3df5 # v4.1.0
+        uses: docker/setup-buildx-action@4d04d5d9486b7bd6fa91e7baf45bbb4f8b9deedd # v4.0.0
 
       - name: Log in to docker hub
-        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
+        uses: docker/login-action@4907a6ddec9925e35a0a9e82d7399ccc52663121 # v4.1.0
         with:
           username: ${{ secrets.DOCKER_USER }}
           password: ${{ secrets.DOCKER_PASSWORD }}
       - name: Log in to the GitHub container registry
-        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
+        uses: docker/login-action@4907a6ddec9925e35a0a9e82d7399ccc52663121 # v4.1.0
         with:
           registry: ghcr.io
           username: ${{ github.actor }}
@@ -168,7 +168,7 @@ jobs:
           - ghcr
           - dockerhub
     steps:
-      - uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+      - uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
 
       - name: Download digests
         uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
@@ -178,17 +178,17 @@ jobs:
           merge-multiple: true
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@d7f5e7f509e45cec5c76c4d5afdd7de93d0b3df5 # v4.1.0
+        uses: docker/setup-buildx-action@4d04d5d9486b7bd6fa91e7baf45bbb4f8b9deedd # v4.0.0
 
       - name: Log in to docker hub
         if: matrix.registry == 'dockerhub'
-        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
+        uses: docker/login-action@4907a6ddec9925e35a0a9e82d7399ccc52663121 # v4.1.0
         with:
           username: ${{ secrets.DOCKER_USER }}
           password: ${{ secrets.DOCKER_PASSWORD }}
       - name: Log in to the GitHub container registry
         if: matrix.registry == 'ghcr'
-        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
+        uses: docker/login-action@4907a6ddec9925e35a0a9e82d7399ccc52663121 # v4.1.0
         with:
           registry: ghcr.io
           username: ${{ github.actor }}
@@ -212,6 +212,74 @@ jobs:
           docker buildx imagetools create $(jq -Rcnr 'inputs | . / "," | map("-t " + .) | join(" ")' <<< "${{ steps.tags.outputs.tags}}") \
             $(printf '${{ steps.tags.outputs.image }}@sha256:%s ' *)
 
+  deploy-ha-addon-repo:
+    if: github.repository == 'esphome/esphome' && needs.init.outputs.branch_build == 'false'
+    runs-on: ubuntu-latest
+    needs:
+      - init
+      - deploy-manifest
+    steps:
+      - name: Generate a token
+        id: generate-token
+        uses: actions/create-github-app-token@1b10c78c7865c340bc4f6099eb2f838309f1e8c3 # v3.1.1
+        with:
+          client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
+          private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
+          owner: esphome
+          repositories: home-assistant-addon
+          permission-actions: write  # actions.createWorkflowDispatch on the target repo (only API call made with this token)
+
+      - name: Trigger Workflow
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
+        with:
+          github-token: ${{ steps.generate-token.outputs.token }}
+          script: |
+            let description = "ESPHome";
+            if (context.eventName == "release") {
+              description = ${{ toJSON(github.event.release.body) }};
+            }
+            github.rest.actions.createWorkflowDispatch({
+              owner: "esphome",
+              repo: "home-assistant-addon",
+              workflow_id: "bump-version.yml",
+              ref: "main",
+              inputs: {
+                version: "${{ needs.init.outputs.tag }}",
+                content: description
+              }
+            })
+
+  deploy-esphome-schema:
+    if: github.repository == 'esphome/esphome' && needs.init.outputs.branch_build == 'false'
+    runs-on: ubuntu-latest
+    needs: [init]
+    environment: ${{ needs.init.outputs.deploy_env }}
+    steps:
+      - name: Generate a token
+        id: generate-token
+        uses: actions/create-github-app-token@1b10c78c7865c340bc4f6099eb2f838309f1e8c3 # v3.1.1
+        with:
+          client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
+          private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
+          owner: esphome
+          repositories: esphome-schema
+          permission-actions: write  # actions.createWorkflowDispatch on the target repo (only API call made with this token)
+
+      - name: Trigger Workflow
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
+        with:
+          github-token: ${{ steps.generate-token.outputs.token }}
+          script: |
+            github.rest.actions.createWorkflowDispatch({
+              owner: "esphome",
+              repo: "esphome-schema",
+              workflow_id: "generate-schemas.yml",
+              ref: "main",
+              inputs: {
+                version: "${{ needs.init.outputs.tag }}",
+              }
+            })
+
   version-notifier:
     if: github.repository == 'esphome/esphome' && needs.init.outputs.branch_build == 'false'
     runs-on: ubuntu-latest
@@ -221,7 +289,7 @@ jobs:
     steps:
       - name: Generate a token
         id: generate-token
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
+        uses: actions/create-github-app-token@1b10c78c7865c340bc4f6099eb2f838309f1e8c3 # v3.1.1
         with:
           client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
           private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
@@ -234,7 +302,7 @@ jobs:
         with:
           github-token: ${{ steps.generate-token.outputs.token }}
           script: |
-            await github.rest.actions.createWorkflowDispatch({
+            github.rest.actions.createWorkflowDispatch({
               owner: "esphome",
               repo: "version-notifier",
               workflow_id: "notify.yml",

.github/workflows/stale.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Stale
-        uses: actions/stale@eb5cf3af3ac0a1aa4c9c45633dd1ae542a27a899 # v10.3.0
+        uses: actions/stale@b5d41d4e1d5dceea10e7104786b73624c18a190f # v10.2.0
         with:
           debug-only: ${{ github.ref != 'refs/heads/dev' }} # Dry-run when not run on dev branch
           remove-stale-when-updated: true

.github/workflows/sync-device-classes.yml

@@ -19,7 +19,7 @@ jobs:
     steps:
       - name: Generate a token
         id: generate-token
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
+        uses: actions/create-github-app-token@1b10c78c7865c340bc4f6099eb2f838309f1e8c3 # v3.1.1
         with:
           client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
           private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
@@ -28,10 +28,10 @@ jobs:
           permission-pull-requests: write  # pulls.create / pulls.update to open or refresh the sync PR
 
       - name: Checkout
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
 
       - name: Checkout Home Assistant
-        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           repository: home-assistant/core
           path: lib/home-assistant
@@ -41,56 +41,19 @@ jobs:
         with:
           python-version: "3.14"
 
-      - name: Set up uv
-        # An order of magnitude faster than pip on cold boots, with its
-        # own wheel cache. ``--system`` (below) installs into the
-        # setup-python interpreter so subsequent ``pre-commit`` /
-        # ``script/run-in-env.py`` steps find the deps without a
-        # ``uv run`` prefix.
-        uses: astral-sh/setup-uv@fac544c07dec837d0ccb6301d7b5580bf5edae39 # v8.2.0
-        with:
-          enable-cache: true
-          # Pin uv version so the action does not have to fetch the
-          # manifest from raw.githubusercontent.com on every cache
-          # miss; that fetch flakes on Windows runners.
-          version: "0.11.15"
-
       - name: Install Home Assistant
         run: |
-          uv pip install --system -e lib/home-assistant
-          uv pip install --system -r requirements.txt -r requirements_test.txt pre-commit
+          python -m pip install --upgrade pip
+          pip install -e lib/home-assistant
+          pip install -r requirements_test.txt pre-commit
 
       - name: Sync
         run: |
           python ./script/sync-device_class.py
 
-      - name: Apply pre-commit auto-fixes
-        # First pass: let formatters (ruff, end-of-file-fixer, etc.) modify
-        # files. pre-commit exits non-zero whenever a hook touches anything,
-        # which would otherwise abort the workflow before the auto-fixes
-        # can flow into the sync PR.
-        #
-        # SKIP:
-        #   - no-commit-to-branch is a local guard against committing on
-        #     dev/release/beta; CI runs on dev by definition, and
-        #     peter-evans/create-pull-request creates the branch itself.
-        #   - pylint surfaces import-error / relative-beyond-top-level
-        #     noise here because this workflow installs only a subset of
-        #     the runtime deps (HA + requirements*.txt); main CI already
-        #     gates pylint on real PRs.
-        env:
-          SKIP: pylint,no-commit-to-branch
-        run: python script/run-in-env.py pre-commit run --all-files || true
-
-      - name: Verify pre-commit clean
-        # Second pass: re-run all hooks against the now-fixed tree.
-        # Auto-fixers exit 0 (nothing to change); any remaining failure
-        # from a check-only hook (flake8 / yamllint / ci-custom) is a
-        # real issue and fails the workflow loudly. Same SKIP list as
-        # above for the same reasons.
-        env:
-          SKIP: pylint,no-commit-to-branch
-        run: python script/run-in-env.py pre-commit run --all-files
+      - name: Run pre-commit hooks
+        run: |
+          python script/run-in-env.py pre-commit run --all-files
 
       - name: Commit changes
         uses: peter-evans/create-pull-request@5f6978faf089d4d20b00c7766989d076bb2fc7f1 # v8.1.1

.gitignore

@@ -141,7 +141,6 @@ tests/.esphome/
 
 sdkconfig.*
 !sdkconfig.defaults
-!sdkconfig.defaults.*
 
 .tests/
 

.pre-commit-config.yaml

@@ -11,7 +11,7 @@ ci:
 repos:
   - repo: https://github.com/astral-sh/ruff-pre-commit
     # Ruff version.
-    rev: v0.15.15
+    rev: v0.15.12
     hooks:
       # Run the linter.
       - id: ruff
@@ -63,7 +63,7 @@ repos:
         name: Update clang-tidy hash
         entry: python script/clang_tidy_hash.py --update-if-changed
         language: python
-        files: ^(\.clang-tidy|platformio\.ini|requirements_dev\.txt|sdkconfig\.defaults|esphome/idf_component\.yml)$
+        files: ^(\.clang-tidy|platformio\.ini|requirements_dev\.txt)$
         pass_filenames: false
         additional_dependencies: []
       - id: ci-custom

CLAUDE.md

@@ -1 +1 @@
-AGENTS.md
+.ai/instructions.md

CODEOWNERS

@@ -19,6 +19,7 @@ esphome/components/ac_dimmer/* @glmnet
 esphome/components/adc/* @esphome/core
 esphome/components/adc128s102/* @DeerMaximum
 esphome/components/addressable_light/* @justfalter
+esphome/components/ade7880/* @kpfleming
 esphome/components/ade7953/* @angelnu
 esphome/components/ade7953_base/* @angelnu
 esphome/components/ade7953_i2c/* @angelnu
@@ -27,7 +28,7 @@ esphome/components/ads1118/* @solomondg1
 esphome/components/ags10/* @mak-42
 esphome/components/aic3204/* @kbx81
 esphome/components/airthings_ble/* @jeromelaban
-esphome/components/airthings_wave_base/* @jeromelaban @ncareau
+esphome/components/airthings_wave_base/* @jeromelaban @kpfleming @ncareau
 esphome/components/airthings_wave_mini/* @ncareau
 esphome/components/airthings_wave_plus/* @jeromelaban @precurse
 esphome/components/alarm_control_panel/* @grahambrown11 @hwstar
@@ -83,7 +84,6 @@ esphome/components/bme680_bsec/* @trvrnrth
 esphome/components/bme68x_bsec2/* @kbx81 @neffs
 esphome/components/bme68x_bsec2_i2c/* @kbx81 @neffs
 esphome/components/bmi160/* @flaviut
-esphome/components/bmi270/* @clydebarrow
 esphome/components/bmp280_base/* @ademuri
 esphome/components/bmp280_i2c/* @ademuri
 esphome/components/bmp280_spi/* @ademuri
@@ -139,7 +139,7 @@ esphome/components/dfplayer/* @glmnet
 esphome/components/dfrobot_sen0395/* @niklasweber
 esphome/components/dht/* @OttoWinter
 esphome/components/display_menu_base/* @numo68
-esphome/components/dlms_meter/* @latonita @PolarGoose @SimonFischer04 @Tomer27cz
+esphome/components/dlms_meter/* @SimonFischer04
 esphome/components/dps310/* @kbx81
 esphome/components/ds1307/* @badbadc0ffee
 esphome/components/ds2484/* @mrk-its
@@ -192,7 +192,6 @@ esphome/components/ft5x06/* @clydebarrow
 esphome/components/ft63x6/* @gpambrozio
 esphome/components/gcja5/* @gcormier
 esphome/components/gdk101/* @Szewcson
-esphome/components/generic_image/* @kahrendt
 esphome/components/gl_r01_i2c/* @pkejval
 esphome/components/globals/* @esphome/core
 esphome/components/gp2y1010au0f/* @zry98
@@ -292,7 +291,6 @@ esphome/components/lock/* @esphome/core
 esphome/components/logger/* @esphome/core
 esphome/components/logger/select/* @clydebarrow
 esphome/components/lps22/* @nagisa
-esphome/components/lsm6ds/* @clydebarrow
 esphome/components/ltr390/* @latonita @sjtrny
 esphome/components/ltr501/* @latonita
 esphome/components/ltr_als_ps/* @latonita
@@ -353,7 +351,6 @@ esphome/components/modbus_server/* @exciton
 esphome/components/mopeka_ble/* @Fabian-Schmidt @spbrogan
 esphome/components/mopeka_pro_check/* @spbrogan
 esphome/components/mopeka_std_check/* @Fabian-Schmidt
-esphome/components/motion/* @esphome/core
 esphome/components/mpl3115a2/* @kbickar
 esphome/components/mpu6886/* @fabaff
 esphome/components/ms8607/* @e28eta
@@ -382,7 +379,6 @@ esphome/components/pca6416a/* @Mat931
 esphome/components/pca9554/* @bdraco @clydebarrow @hwstar
 esphome/components/pcf85063/* @brogon
 esphome/components/pcf8563/* @KoenBreeman
-esphome/components/pcm5122/* @remcom
 esphome/components/pi4ioe5v6408/* @jesserockz
 esphome/components/pid/* @OttoWinter
 esphome/components/pipsolar/* @andreashergert1984
@@ -421,7 +417,6 @@ esphome/components/restart/* @esphome/core
 esphome/components/rf_bridge/* @jesserockz
 esphome/components/rgbct/* @jesserockz
 esphome/components/ring_buffer/* @kahrendt
-esphome/components/router/speaker/* @kahrendt
 esphome/components/rp2040/* @jesserockz
 esphome/components/rp2040_ble/* @bdraco
 esphome/components/rp2040_pio_led_strip/* @Papa-DMan
@@ -448,7 +443,6 @@ esphome/components/sen21231/* @shreyaskarnik
 esphome/components/sen5x/* @martgras
 esphome/components/sen6x/* @martgras @mebner86 @mikelawrence @tuct
 esphome/components/sendspin/* @kahrendt
-esphome/components/sendspin/generic_image/* @kahrendt
 esphome/components/sendspin/media_player/* @kahrendt
 esphome/components/sendspin/media_source/* @kahrendt
 esphome/components/sendspin/sensor/* @kahrendt
@@ -600,7 +594,6 @@ esphome/components/wk2212_spi/* @DrCoolZic
 esphome/components/wl_134/* @hobbypunk90
 esphome/components/wts01/* @alepee
 esphome/components/x9c/* @EtienneMD
-esphome/components/xdb401/* @RT530
 esphome/components/xgzp68xx/* @gcormier
 esphome/components/xiaomi_hhccjcy10/* @fariouche
 esphome/components/xiaomi_lywsd02mmc/* @juanluss31

Doxyfile

@@ -48,7 +48,7 @@ PROJECT_NAME           = ESPHome
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 2026.7.0-dev
+PROJECT_NUMBER         = 2026.5.0-dev
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a

GEMINI.md

@@ -1 +1 @@
-AGENTS.md
+.ai/instructions.md

codecov.yml

@@ -1,18 +0,0 @@
-coverage:
-  status:
-    patch:
-      default:
-        target: 100%
-        threshold: 0%
-    project:
-      default:
-        informational: true
-
-ignore:
-  - "esphome/components/**/*"
-  - "esphome/analyze_memory/**/*"
-  - "tests/integration/**/*"
-
-comment:
-  layout: "reach, diff, flags, files"
-  require_changes: true

docker/Dockerfile

@@ -13,16 +13,12 @@ RUN git config --system --add safe.directory "*" \
     && git config --system advice.detachedHead false
 
 # Install build tools for Python packages that require compilation
-# (e.g., ruamel.yaml.clib used by ESP-IDF's idf-component-manager).
-# Also install libusb-1.0 at runtime so the ESP-IDF tools installer can
-# validate openocd-esp32 (it dynamically links libusb-1.0.so.0); without
-# it idf_tools.py rejects the openocd install with exit 127 and aborts
-# the whole framework setup.
+# (e.g., ruamel.yaml.clibz used by ESP-IDF's idf-component-manager)
 RUN if command -v apk > /dev/null; then \
-        apk add --no-cache build-base libusb; \
+        apk add --no-cache build-base; \
     else \
         apt-get update \
-        && apt-get install -y --no-install-recommends build-essential libusb-1.0-0 \
+        && apt-get install -y --no-install-recommends build-essential \
         && rm -rf /var/lib/apt/lists/*; \
     fi
 

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/nginx/run

@@ -6,15 +6,11 @@
 # ==============================================================================
 
 # The new device builder handles HA ingress itself, so nginx is bypassed.
-# Block the longrun so s6 keeps the dependency satisfied, but exit 0 on
-# SIGTERM instead of being signal-killed; a 256/15 exit makes nginx/finish
-# stamp the container exit 143, which trips the Supervisor's SIGTERM check.
+# Block the longrun forever so s6 keeps the dependency satisfied and does
+# not respawn it.
 if bashio::config.true 'use_new_device_builder'; then
     bashio::log.info "NGINX bypassed: new device builder serves ingress directly."
-    trap 'exit 0' TERM
-    sleep infinity &
-    wait
-    exit 0
+    exec sleep infinity
 fi
 
 bashio::log.info "Waiting for ESPHome dashboard to come up..."

esphome/__main__.py

@@ -50,7 +50,6 @@ from esphome.const import (
     CONF_TOPIC,
     CONF_USERNAME,
     CONF_WEB_SERVER,
-    CONF_WIFI,
     ENV_NOGITIGNORE,
     KEY_CORE,
     KEY_TARGET_PLATFORM,
@@ -70,6 +69,7 @@ from esphome.util import (
     PICOTOOL_PACKAGE,
     FlashImage,
     detect_rp2040_bootsel,
+    get_ltchiptool_path,
     get_picotool_path,
     get_serial_ports,
     is_picotool_usb_permission_error,
@@ -608,7 +608,7 @@ def run_miniterm(config: ConfigType, port: str, args) -> int:
 
     try:
         module = importlib.import_module("esphome.components." + CORE.target_platform)
-        process_stacktrace = module.process_stacktrace
+        process_stacktrace = getattr(module, "process_stacktrace")
     except (AttributeError, ImportError):
         _LOGGER.info(
             'Stacktrace analysis is unavailable: no compatible analyzer found for target platform "%s".',
@@ -639,7 +639,7 @@ def run_miniterm(config: ConfigType, port: str, args) -> int:
                         chunk = ser.read(ser.in_waiting or 1)
                         if not chunk:
                             continue
-                        time_ = datetime.now().astimezone()
+                        time_ = datetime.now()
                         milliseconds = time_.microsecond // 1000
                         time_str = f"[{time_.hour:02}:{time_.minute:02}:{time_.second:02}.{milliseconds:03}]"
 
@@ -695,11 +695,6 @@ def _wrap_to_code(name, comp, yaml_util):
 def write_cpp(config: ConfigType) -> int:
     from esphome import writer
 
-    # Refresh the storage sidecar and clean an incompatible previous build
-    # before regenerating any sources. This may full-wipe the build dir, so it
-    # has to run before write_cpp_file writes src/.
-    writer.update_storage_json()
-
     if not get_bool_env(ENV_NOGITIGNORE):
         writer.write_gitignore()
 
@@ -739,22 +734,11 @@ def write_cpp_file() -> int:
 
 
 def compile_program(args: ArgsProtocol, config: ConfigType) -> int:
-    # Keep this gate here, NOT in config validation: device-builder needs
-    # `esphome config` to keep succeeding with placeholders so onboarding can run.
-    if CONF_WIFI in config:
-        from esphome.components.wifi import check_placeholder_credentials
-
-        check_placeholder_credentials(config)
-
     # NOTE: "Build path:" format is parsed by script/ci_memory_impact_extract.py
     # If you change this format, update the regex in that script as well
     _LOGGER.info("Compiling app... Build path: %s", CORE.build_path)
 
-    module = importlib.import_module("esphome.components." + CORE.target_platform)
-    platform_run_compile = getattr(module, "run_compile", None)
-    if platform_run_compile is not None and platform_run_compile(args, config):
-        pass
-    elif CORE.using_toolchain_esp_idf:
+    if CORE.using_toolchain_esp_idf:
         from esphome.espidf import toolchain
 
         rc = toolchain.run_compile(config, CORE.verbose)
@@ -765,7 +749,6 @@ def compile_program(args: ArgsProtocol, config: ConfigType) -> int:
         toolchain.create_factory_bin()
         toolchain.create_ota_bin()
         toolchain.create_elf_copy()
-        toolchain.get_idedata()
     else:
         from esphome.platformio import toolchain
 
@@ -800,7 +783,7 @@ def _check_and_emit_build_info() -> None:
 
     # Read build_info from JSON
     try:
-        with build_info_json_path.open(encoding="utf-8") as f:
+        with open(build_info_json_path, encoding="utf-8") as f:
             build_info = json.load(f)
     except (OSError, json.JSONDecodeError) as e:
         _LOGGER.debug("Failed to read build_info: %s", e)
@@ -871,9 +854,15 @@ def upload_using_esptool(
     elif CORE.using_toolchain_esp_idf:
         from esphome.espidf import toolchain
 
-        flash_images = [
-            FlashImage(path=toolchain.get_factory_firmware_path(), offset="0x0")
-        ]
+        # For ESP-IDF the upload is a single factory image at 0x0 (it bundles
+        # bootloader + partitions + app). The prebuilt-dir form ships that
+        # single file at the canonical name so the dashboard can flash it
+        # without re-deriving the ESP-IDF build path.
+        factory_path = (
+            CORE.prebuilt_artifact_path("firmware.factory.bin")
+            or toolchain.get_factory_firmware_path()
+        )
+        flash_images = [FlashImage(path=factory_path, offset="0x0")]
     else:
         from esphome.platformio import toolchain
 
@@ -949,9 +938,56 @@ def upload_using_esptool(
     return run_esptool(115200)
 
 
+def upload_using_ltchiptool(_config: ConfigType, port: str) -> int:
+    """Upload a libretiny ``.uf2`` directly via ``ltchiptool flash write``.
+
+    Bypasses PlatformIO so the dashboard's transparent install can flash a
+    libretiny device from just a prebuilt ``.uf2`` and a serial port; no
+    local build tree, ``platformio.ini`` or libretiny package install on the
+    machine running ``esphome upload`` is required (ltchiptool itself is
+    still required, but it ships with the libretiny PlatformIO platform or
+    can be ``pip install``-ed independently).
+
+    Chip family is auto-detected from the UF2 header so we don't need to
+    plumb through ``CORE.data[KEY_LIBRETINY][KEY_FAMILY]``.
+
+    The ``_config`` parameter is unused but kept for signature parity with
+    ``upload_using_platformio`` / ``upload_using_picotool`` so the dispatch
+    in ``upload_program`` can stay symmetric.
+    """
+    firmware = CORE.firmware_bin
+    if not firmware.is_file():
+        _LOGGER.error(
+            "LibreTiny firmware file not found at %s. "
+            "Make sure the project has been compiled first, or that "
+            "--prebuilt-dir points at a directory containing firmware.uf2 "
+            "(or firmware.bin -- libretiny emits the same UF2 content under "
+            "both names).",
+            firmware,
+        )
+        return 1
+
+    ltchiptool = get_ltchiptool_path()
+    if ltchiptool is None:
+        _LOGGER.error(
+            "ltchiptool not found. Install the libretiny PlatformIO platform "
+            "(esphome compile <yaml> with a libretiny board pulls it in) or "
+            "run `pip install ltchiptool` in this environment."
+        )
+        return 1
+
+    _LOGGER.info("Uploading firmware to LibreTiny device via ltchiptool...")
+    cmd = [str(ltchiptool), "flash", "write", "-d", port, str(firmware)]
+    return run_external_process(*cmd)
+
+
 def upload_using_platformio(config: ConfigType, port: str) -> int:
     from esphome.platformio import toolchain
 
+    # `upload_program` routes around this helper when --prebuilt-dir is set
+    # (libretiny→ltchiptool, RP2040→1200bps-touch+picotool), so PlatformIO
+    # is only invoked when a local build tree is available.
+
     # RP2040 platform-raspberrypi build recipe expects firmware.bin.signed for
     # the upload target, but 'nobuild' skips the build phase that creates it.
     # Create it here so the upload doesn't fail.
@@ -990,14 +1026,31 @@ def upload_using_picotool(config: ConfigType) -> int:
     from esphome.platformio import toolchain
 
     idedata = toolchain.get_idedata(config)
-    firmware_elf = Path(idedata.firmware_elf_path)
 
-    if not firmware_elf.is_file():
-        _LOGGER.error(
-            "Firmware ELF file not found at %s. "
-            "Make sure the project has been compiled first.",
-            firmware_elf,
-        )
+    # --prebuilt-dir ships canonical artifacts at the root of the directory,
+    # not the full PlatformIO build tree, so the ELF may not be present.
+    # picotool's "load" target accepts .uf2 / .bin / .elf, so fall back to
+    # CORE.firmware_bin (which resolves to the prebuilt firmware.uf2 when set)
+    # when no ELF is available.
+    elf_path = Path(idedata.firmware_elf_path)
+    if elf_path.is_file():
+        firmware_file: Path = elf_path
+    elif CORE.prebuilt_dir is not None and CORE.firmware_bin.is_file():
+        firmware_file = CORE.firmware_bin
+    else:
+        if CORE.prebuilt_dir is not None:
+            _LOGGER.error(
+                "No firmware found for picotool: neither %s (from idedata) "
+                "nor %s (prebuilt) exists.",
+                elf_path,
+                CORE.firmware_bin,
+            )
+        else:
+            _LOGGER.error(
+                "Firmware ELF file not found at %s. "
+                "Make sure the project has been compiled first.",
+                elf_path,
+            )
         return 1
 
     picotool = get_picotool_path(idedata.cc_path)
@@ -1015,7 +1068,7 @@ def upload_using_picotool(config: ConfigType) -> int:
         # so progress bars display in real-time with \r updates.
         # Capture stderr only so we can detect permission errors.
         result = subprocess.run(
-            [str(picotool), "load", "-v", "-x", str(firmware_elf)],
+            [str(picotool), "load", "-v", "-x", str(firmware_file)],
             stderr=subprocess.PIPE,
             timeout=60,
             check=False,
@@ -1044,6 +1097,61 @@ def upload_using_picotool(config: ConfigType) -> int:
     return 0
 
 
+def _rp2040_serial_reset_to_bootsel(port: str, timeout: float = 10.0) -> bool:
+    """Reboot an arduino-pico RP2040 from running firmware into BOOTSEL mode.
+
+    arduino-pico's USB CDC handler treats a 1200bps "touch" (open the port at
+    1200 baud, then close it) as a request to reboot into the rp2040
+    bootloader, exposing the device as a picotool-loadable BOOTSEL endpoint.
+    This is the same mechanism the arduino-pico PlatformIO recipe uses for
+    serial uploads, lifted out so --prebuilt-dir uploads don't need to
+    re-invoke PlatformIO.
+
+    Returns True once a BOOTSEL device shows up on the USB bus.
+    """
+    import serial
+
+    # Look picotool up *before* triggering the reset. If it's missing, the
+    # touch would leave the device stranded in BOOTSEL with nothing able to
+    # flash it; bail out early so the user can recover (the device is still
+    # running the old firmware and re-enumerates as the same serial port).
+    picotool = _find_picotool()
+    if picotool is None:
+        _LOGGER.error(
+            "picotool not found; cannot flash RP2040 after BOOTSEL reset. "
+            "Ensure the RP2040 PlatformIO platform is installed (%s).",
+            PICOTOOL_PACKAGE,
+        )
+        return False
+
+    _LOGGER.info("Rebooting %s into BOOTSEL via 1200bps touch...", port)
+    try:
+        ser = serial.Serial()
+        ser.baudrate = 1200
+        ser.port = port
+        ser.open()
+        # Small wait so the firmware sees the open before we close it; on a
+        # fast host the open+close can otherwise happen inside a single USB
+        # frame and the touch is missed.
+        time.sleep(0.1)
+        ser.close()
+    except (OSError, serial.SerialException) as err:
+        _LOGGER.error("Failed to open %s at 1200 baud for BOOTSEL reset: %s", port, err)
+        return False
+
+    start = time.monotonic()
+    while time.monotonic() - start < timeout:
+        if detect_rp2040_bootsel(picotool).device_count > 0:
+            return True
+        time.sleep(0.2)
+    _LOGGER.error(
+        "RP2040 did not enter BOOTSEL within %.0fs after 1200bps touch on %s.",
+        timeout,
+        port,
+    )
+    return False
+
+
 def _wait_for_serial_port(
     port: str | None = None,
     timeout: float = 30.0,
@@ -1062,7 +1170,7 @@ def _wait_for_serial_port(
     def _port_found() -> bool:
         if port is not None:
             if os.name == "posix":
-                return Path(port).exists()
+                return os.path.exists(port)
             return any(p.path == port for p in get_serial_ports())
         ports = get_serial_ports()
         if known_ports is not None:
@@ -1101,13 +1209,77 @@ def check_permissions(port: str):
             )
 
 
+def _missing_prebuilt_flash_tool() -> str | None:
+    """Return the name of the platform-specific flash tool that's expected
+    but not yet on disk, or None if no install step is needed.
+
+    ESP* paths use bundled esptool / smpclient. Libretiny + RP2040 paths
+    use ltchiptool / picotool, which ship inside the PlatformIO platform
+    package and aren't pip-installable on their own.
+    """
+    if CORE.is_libretiny and get_ltchiptool_path() is None:
+        return "ltchiptool"
+    if CORE.target_platform == PLATFORM_RP2040 and _find_picotool() is None:
+        return "picotool"
+    return None
+
+
+def _ensure_platform_packages_for_prebuilt_upload(config: ConfigType) -> int:
+    """Make sure the per-platform flash tool is available before a
+    ``--prebuilt-dir`` upload dispatches.
+
+    On a host that has never compiled the target platform locally (the
+    dashboard's transparent-install scenario), the flash tool isn't on
+    disk yet. Mirror what ``esphome compile`` would do up to the
+    platform-install step (codegen + write platformio.ini), then run
+    ``pio run -t idedata`` so the platform is downloaded without paying
+    for an actual compile.
+
+    Returns 0 if no install was needed or the install succeeded; non-zero
+    on failure so the upload bails out with a clear status.
+    """
+    tool_name = _missing_prebuilt_flash_tool()
+    if tool_name is None:
+        return 0
+
+    _LOGGER.info(
+        "%s not found on this host; configuring the PlatformIO %s "
+        "platform so the upload can flash the prebuilt firmware...",
+        tool_name,
+        CORE.target_platform,
+    )
+    rc = write_cpp(config)
+    if rc != 0:
+        return rc
+
+    from esphome.platformio import toolchain
+
+    return toolchain.prepare_platform_for_upload(config, CORE.verbose)
+
+
 def upload_program(
     config: ConfigType, args: ArgsProtocol, devices: list[str]
 ) -> tuple[int, str | None]:
     host = devices[0]
+
+    # --prebuilt-dir routes every per-platform upload helper at a directory of
+    # prebuilt artifacts instead of the local build tree. Validate once here
+    # so failures surface before we dispatch into platform-specific code that
+    # would otherwise produce confusing "file not found" errors deep in the
+    # esptool / picotool / PlatformIO call stacks.
+    prebuilt_dir = getattr(args, "prebuilt_dir", None)
+    if prebuilt_dir is not None:
+        prebuilt_path = Path(prebuilt_dir).expanduser()
+        if not prebuilt_path.is_dir():
+            raise EsphomeError(f"--prebuilt-dir {prebuilt_dir} is not a directory")
+        CORE.prebuilt_dir = prebuilt_path
+        rc = _ensure_platform_packages_for_prebuilt_upload(config)
+        if rc != 0:
+            return rc, None
+
     try:
         module = importlib.import_module("esphome.components." + CORE.target_platform)
-        if module.upload_program(config, args, host):
+        if getattr(module, "upload_program")(config, args, host):
             return 0, host
     except AttributeError:
         pass
@@ -1143,6 +1315,27 @@ def upload_program(
         if CORE.target_platform in (PLATFORM_ESP32, PLATFORM_ESP8266):
             file = getattr(args, "file", None)
             exit_code = upload_using_esptool(config, host, file, args.upload_speed)
+        elif CORE.is_libretiny and CORE.prebuilt_dir is not None:
+            # Dashboard transparent-install case: flash a prebuilt .uf2 with
+            # ltchiptool directly so the build tree isn't required. Without
+            # --prebuilt-dir, the normal PlatformIO path is still used so this
+            # is purely additive and existing libretiny serial flows are
+            # unchanged.
+            exit_code = upload_using_ltchiptool(config, host)
+        elif CORE.target_platform == PLATFORM_RP2040 and CORE.prebuilt_dir is not None:
+            # RP2040 serial + --prebuilt-dir: 1200bps-touch reboot into BOOTSEL,
+            # then flash with picotool. Avoids the PlatformIO build-tree
+            # requirement that upload_using_platformio imposes, mirroring the
+            # libretiny→ltchiptool path. Without --prebuilt-dir the original
+            # PlatformIO path is preserved for back-compat.
+            if _rp2040_serial_reset_to_bootsel(host):
+                exit_code = upload_using_picotool(config)
+            else:
+                # Touch reset failed: the helper already logged a specific
+                # error (port open failure, picotool missing, or BOOTSEL
+                # never enumerated). Be explicit about the failed exit code
+                # rather than relying on the function-level default of 1.
+                exit_code = 1
         elif CORE.target_platform == PLATFORM_RP2040 or CORE.is_libretiny:
             exit_code = upload_using_platformio(config, host)
         # else: Unknown target platform, exit_code remains 1
@@ -1356,23 +1549,10 @@ def _validate_bootloader_binary(binary: Path) -> None:
         )
 
 
-def _should_subscribe_states(args: ArgsProtocol) -> bool:
-    """Determine whether entity state changes should be shown in log output.
-
-    The ``--states``/``--no-states`` command line flags take precedence. When
-    neither is given, the ``ESPHOME_LOG_STATES`` environment variable controls
-    the behavior, defaulting to showing states.
-    """
-    states = getattr(args, "states", None)
-    if states is not None:
-        return states
-    return get_bool_env("ESPHOME_LOG_STATES", True)
-
-
 def show_logs(config: ConfigType, args: ArgsProtocol, devices: list[str]) -> int | None:
     try:
         module = importlib.import_module("esphome.components." + CORE.target_platform)
-        if module.show_logs(config, args, devices):
+        if getattr(module, "show_logs")(config, args, devices):
             return 0
     except AttributeError:
         pass
@@ -1398,7 +1578,7 @@ def show_logs(config: ConfigType, args: ArgsProtocol, devices: list[str]) -> int
         return run_logs(
             config,
             network_devices,
-            subscribe_states=_should_subscribe_states(args),
+            subscribe_states=not getattr(args, "no_states", False),
         )
 
     if port_type in (PortType.NETWORK, PortType.MQTT) and has_mqtt_logging():
@@ -1428,68 +1608,20 @@ def command_wizard(args: ArgsProtocol) -> int | None:
 def command_config(args: ArgsProtocol, config: ConfigType) -> int | None:
     from esphome import yaml_util
 
-    if getattr(args, "no_defaults", False):
-        user_config = getattr(config, "user_config", None)
-        if user_config is None:
-            _LOGGER.warning(
-                "--no-defaults requested but the user-only config snapshot is "
-                "unavailable; falling back to the validated configuration."
-            )
-        else:
-            config = user_config
-    elif not CORE.verbose:
+    if not CORE.verbose:
         config = strip_default_ids(config)
     output = yaml_util.dump(config, args.show_secrets)
+    # add the console decoration so the front-end can hide the secrets
     if not args.show_secrets:
-        output = _redact_with_legacy_fallback(output)
+        output = re.sub(
+            r"(password|key|psk|ssid)\: (.+)", r"\1: \\033[8m\2\\033[28m", output
+        )
     if not CORE.quiet:
         safe_print(output)
     _LOGGER.info("Configuration is valid!")
     return 0
 
 
-# Legacy substring redaction fallback for unmigrated schemas; removed in
-# 2026.12.0 once canonical sensitive fields are tagged. The lookahead skips
-# values that already render themselves: ``\033[8m`` (SensitiveStr wrap),
-# ``!secret`` (preserves the user-friendly tag), ``!lambda`` (multi-line
-# block; first line is structural). The fragment must either start the
-# field name or follow ``_`` so the warning names a real field; this avoids
-# false positives like ``monkey:`` matching the ``key`` fragment.
-_LEGACY_REDACTION_RE = re.compile(
-    r"(?P<key>\b(?:\w+_)?(?:password|key|psk|ssid))\: "
-    r"(?!\\033\[8m|!secret\b|!lambda\b)(?P<val>.+)"
-)
-_LEGACY_REDACTION_REMOVAL = "2026.12.0"
-
-
-def _redact_with_legacy_fallback(output: str) -> str:
-    unmarked: set[str] = set()
-
-    def _replace(m: re.Match[str]) -> str:
-        unmarked.add(m.group("key"))
-        return f"{m.group('key')}: \\033[8m{m.group('val')}\\033[28m"
-
-    output = _LEGACY_REDACTION_RE.sub(_replace, output)
-    for key in sorted(unmarked):
-        _LOGGER.warning(
-            "Field '%s' is being redacted by a legacy substring heuristic. "
-            "Mark this field's schema validator with cv.sensitive(...) for "
-            "deterministic redaction; the heuristic will be removed in %s.",
-            key,
-            _LEGACY_REDACTION_REMOVAL,
-        )
-    return output
-
-
-def command_config_hash(args: ArgsProtocol, config: ConfigType) -> int | None:
-    # generating code might modify config, so it must be done in order to generate
-    # a hash that will match what was generated when compiling and then running
-    # on the device
-    generate_cpp_contents(config)
-    safe_print(f"0x{CORE.config_hash:08x}")
-    return 0
-
-
 def command_vscode(args: ArgsProtocol) -> int | None:
     from esphome import vscode
 
@@ -1645,7 +1777,7 @@ def command_clean(args: ArgsProtocol, config: ConfigType) -> int | None:
     from esphome import writer
 
     try:
-        writer.clean_build(full=True)
+        writer.clean_build()
     except OSError as err:
         _LOGGER.error("Error deleting build files: %s", err)
         return 1
@@ -1858,7 +1990,7 @@ def command_analyze_memory(args: ArgsProtocol, config: ConfigType) -> int:
         ram_report = ram_analyzer.generate_report()
         print()
         print(ram_report)
-    except Exception as e:  # noqa: BLE001  # pylint: disable=broad-except
+    except Exception as e:  # pylint: disable=broad-except
         _LOGGER.warning("RAM strings analysis failed: %s", e)
 
     return 0
@@ -2025,7 +2157,6 @@ PRE_CONFIG_ACTIONS = {
 
 POST_CONFIG_ACTIONS = {
     "config": command_config,
-    "config-hash": command_config_hash,
     "compile": command_compile,
     "upload": command_upload,
     "logs": command_logs,
@@ -2046,29 +2177,6 @@ SIMPLE_CONFIG_ACTIONS = [
 ]
 
 
-def _add_states_args(parser: argparse.ArgumentParser) -> None:
-    """Add mutually exclusive ``--states``/``--no-states`` flags to a parser.
-
-    When neither flag is given, the ``ESPHOME_LOG_STATES`` environment variable
-    controls whether entity state changes are shown (defaulting to showing them).
-    """
-    states_group = parser.add_mutually_exclusive_group()
-    states_group.add_argument(
-        "--states",
-        dest="states",
-        action="store_true",
-        default=None,
-        help="Show entity state changes in log output (overrides ESPHOME_LOG_STATES).",
-    )
-    states_group.add_argument(
-        "--no-states",
-        dest="states",
-        action="store_false",
-        default=None,
-        help="Do not show entity state changes in log output.",
-    )
-
-
 def parse_args(argv):
     options_parser = argparse.ArgumentParser(add_help=False)
     options_parser.add_argument(
@@ -2161,19 +2269,6 @@ def parse_args(argv):
     parser_config.add_argument(
         "--show-secrets", help="Show secrets in output.", action="store_true"
     )
-    parser_config.add_argument(
-        "--no-defaults",
-        help="Only output the user-supplied configuration without "
-        "schema defaults applied.",
-        action="store_true",
-    )
-
-    parser_config_hash = subparsers.add_parser(
-        "config-hash", help="Calculate the hash of the configuration."
-    )
-    parser_config_hash.add_argument(
-        "configuration", help="Your YAML configuration file(s).", nargs="+"
-    )
 
     parser_compile = subparsers.add_parser(
         "compile", help="Read the configuration and compile a program."
@@ -2208,6 +2303,16 @@ def parse_args(argv):
         "--file",
         help="Manually specify the binary file to upload.",
     )
+    parser_upload.add_argument(
+        "--prebuilt-dir",
+        help=(
+            "Advanced: directory of prebuilt artifacts to flash instead of "
+            "re-deriving paths from the local build tree. Intended for the "
+            "ESPHome dashboard's transparent install flow on hosts that "
+            "don't compile firmware themselves. End users should not need "
+            "this flag."
+        ),
+    )
     parser_upload.add_argument(
         "--ota-platform",
         choices=[CONF_ESPHOME, CONF_WEB_SERVER],
@@ -2251,7 +2356,11 @@ def parse_args(argv):
         help="Reset the device before starting serial logs.",
         default=os.getenv("ESPHOME_SERIAL_LOGGING_RESET"),
     )
-    _add_states_args(parser_logs)
+    parser_logs.add_argument(
+        "--no-states",
+        action="store_true",
+        help="Do not show entity state changes in log output.",
+    )
 
     parser_discover = subparsers.add_parser(
         "discover",
@@ -2282,9 +2391,6 @@ def parse_args(argv):
     parser_run.add_argument(
         "--no-logs", help="Disable starting logs.", action="store_true"
     )
-
-    _add_states_args(parser_run)
-
     parser_run.add_argument(
         "--reset",
         "-r",
@@ -2521,41 +2627,10 @@ def run_esphome(argv):
     # Commands that don't need fresh external components: logs just connects
     # to the device, and clean is about to delete the build directory.
     skip_external = args.command in ("logs", "clean")
-    command_line_substitutions = dict(args.substitution) if args.substitution else {}
-
-    # Fast path for upload/logs: reuse the validated-config cache the
-    # last compile wrote. Falls back to read_config when missing/stale.
-    # Skipped when -s overrides are passed, since the cache was written
-    # against the previous substitution set.
-    config: ConfigType | None = None
-    cache_eligible = (
-        args.command in ("upload", "logs") and not command_line_substitutions
+    config = read_config(
+        dict(args.substitution) if args.substitution else {},
+        skip_external_update=skip_external,
     )
-    if cache_eligible:
-        from esphome.compiled_config import load_compiled_config
-
-        config = load_compiled_config(conf_path)
-        if config is not None:
-            _LOGGER.info(
-                "Loaded validated config cache for %s, skipping validation.",
-                conf_path.name,
-            )
-
-    if config is None:
-        config = read_config(
-            command_line_substitutions,
-            skip_external_update=skip_external,
-        )
-        # Refresh the cache so the next upload/logs hits the fast path
-        # instead of re-running read_config. Skip when the storage
-        # sidecar is absent (no compile has run): the cache would
-        # never be loaded back, so writing secrets to disk is wasted.
-        if cache_eligible and config is not None:
-            from esphome.compiled_config import save_compiled_config
-            from esphome.storage_json import ext_storage_path
-
-            if ext_storage_path(conf_path.name).exists():
-                save_compiled_config(config)
     if config is None:
         return 2
     CORE.config = config

esphome/analyze_memory/cli.py

@@ -6,7 +6,6 @@ from collections import defaultdict
 from collections.abc import Callable
 import heapq
 from operator import itemgetter
-from pathlib import Path
 import sys
 from typing import TYPE_CHECKING
 
@@ -510,7 +509,7 @@ class MemoryAnalyzerCLI(MemoryAnalyzer):
             lines.append(
                 f"{_COMPONENT_CORE} Symbols > {self.SYMBOL_SIZE_THRESHOLD} B ({len(large_core_symbols)} symbols):"
             )
-            for i, (_symbol, demangled, size) in enumerate(large_core_symbols):
+            for i, (symbol, demangled, size) in enumerate(large_core_symbols):
                 # Core symbols only track (symbol, demangled, size) without section info,
                 # so we don't show section labels here
                 lines.append(
@@ -602,7 +601,7 @@ class MemoryAnalyzerCLI(MemoryAnalyzer):
                 lines.append(
                     f"{comp_name} Symbols > {self.SYMBOL_SIZE_THRESHOLD} B & storage ({len(large_symbols)} symbols):"
                 )
-                for i, (_symbol, demangled, size, section) in enumerate(large_symbols):
+                for i, (symbol, demangled, size, section) in enumerate(large_symbols):
                     lines.append(
                         f"{i + 1}. {self._format_symbol_with_section(demangled, size, section)}"
                     )
@@ -641,7 +640,7 @@ class MemoryAnalyzerCLI(MemoryAnalyzer):
                 lines.append(
                     f"  Symbols > {self.RAM_SYMBOL_SIZE_THRESHOLD} B ({len(large_ram_syms)}):"
                 )
-                for _symbol, demangled, size, section in large_ram_syms[:10]:
+                for symbol, demangled, size, section in large_ram_syms[:10]:
                     # Format section label consistently by stripping leading dot
                     section_label = section.lstrip(".") if section else ""
                     display_name = _format_pstorage_name(demangled)
@@ -700,7 +699,7 @@ class MemoryAnalyzerCLI(MemoryAnalyzer):
         content = "\n".join(lines)
 
         if output_file:
-            with Path(output_file).open("w", encoding="utf-8") as f:
+            with open(output_file, "w", encoding="utf-8") as f:
                 f.write(content)
         else:
             print(content)
@@ -738,6 +737,7 @@ def main():
 
     # Load build directory
     import json
+    from pathlib import Path
 
     from esphome.platformio.toolchain import IDEData
 
@@ -785,7 +785,7 @@ def main():
         if not idedata_path.exists():
             continue
         try:
-            with idedata_path.open(encoding="utf-8") as f:
+            with open(idedata_path, encoding="utf-8") as f:
                 raw_data = json.load(f)
             idedata = IDEData(raw_data)
             print(f"Loaded idedata from: {idedata_path}", file=sys.stderr)

esphome/analyze_memory/demangle.py

@@ -154,7 +154,7 @@ def batch_demangle(
     failed_count = 0
 
     for original, stripped, prefix, demangled in zip(
-        symbols, symbols_stripped, symbols_prefixes, demangled_lines, strict=True
+        symbols, symbols_stripped, symbols_prefixes, demangled_lines
     ):
         # Add back any prefix that was removed
         demangled = _restore_symbol_prefix(prefix, stripped, demangled)

esphome/analyze_memory/toolchain.py

@@ -3,6 +3,7 @@
 from __future__ import annotations
 
 import logging
+import os
 from pathlib import Path
 import subprocess
 from typing import TYPE_CHECKING
@@ -36,7 +37,7 @@ def _find_in_platformio_packages(tool_name: str) -> str | None:
         Full path to the tool or None if not found
     """
     # Get PlatformIO packages directory
-    platformio_home = Path("~/.platformio/packages").expanduser()
+    platformio_home = Path(os.path.expanduser("~/.platformio/packages"))
     if not platformio_home.exists():
         return None
 

esphome/async_thread.py

@@ -45,7 +45,7 @@ class AsyncThreadRunner(threading.Thread, Generic[_T]):
     async def _runner(self) -> None:
         try:
             self.result = await self._coro_factory()
-        except Exception as exc:  # noqa: BLE001  # pylint: disable=broad-except
+        except Exception as exc:  # pylint: disable=broad-except
             # Capture all exceptions so ``event`` is always set — otherwise a
             # crash would hang the waiter forever.
             self.exception = exc

esphome/build_gen/espidf.py

@@ -3,38 +3,24 @@
 import json
 from pathlib import Path
 
-from esphome.components.esp32 import get_esp32_variant, idf_version
-import esphome.config_validation as cv
+from esphome.components.esp32 import get_esp32_variant
 from esphome.core import CORE
 from esphome.helpers import mkdir_p, write_file_if_changed
-
-# Replaces the IDF default C++ standard (-std=gnu++2b appended to
-# CXX_COMPILE_OPTIONS by project.cmake's __build_init) with the one set via
-# cg.set_cpp_standard(). Emitted between include(project.cmake) and project(),
-# i.e. after IDF appends its default and before the options are consumed, and
-# applies project-wide like PlatformIO build_unflags.
-CPP_STANDARD_TEMPLATE = """\
-idf_build_get_property(esphome_cxx_compile_options CXX_COMPILE_OPTIONS)
-list(FILTER esphome_cxx_compile_options EXCLUDE REGEX "^-std=")
-list(APPEND esphome_cxx_compile_options "-std={standard}")
-idf_build_set_property(CXX_COMPILE_OPTIONS "${{esphome_cxx_compile_options}}")"""
+from esphome.writer import update_storage_json
 
 
 def get_available_components() -> list[str] | None:
-    """Get list of built-in ESP-IDF components from project_description.json.
+    """Get list of available ESP-IDF components from project_description.json.
 
-    Excludes ``src``, IDF-managed components (``managed_components/``), and
-    converted PIO libs (``pio_components/``). Returns ``None`` if the build
-    dir or ``project_description.json`` isn't ready yet.
+    Returns only internal ESP-IDF components, excluding external/managed
+    components (from idf_component.yml).
     """
-    if CORE.build_path is None:
-        return None
     project_desc = Path(CORE.build_path) / "build" / "project_description.json"
     if not project_desc.exists():
         return None
 
     try:
-        with project_desc.open(encoding="utf-8") as f:
+        with open(project_desc, encoding="utf-8") as f:
             data = json.load(f)
 
         component_info = data.get("build_component_info", {})
@@ -45,9 +31,9 @@ def get_available_components() -> list[str] | None:
             if name == "src":
                 continue
 
-            # Exclude IDF-managed and converted-PIO components (external).
+            # Exclude managed/external components
             comp_dir = info.get("dir", "")
-            if "managed_components" in comp_dir or "pio_components" in comp_dir:
+            if "managed_components" in comp_dir:
                 continue
 
             result.append(name)
@@ -62,74 +48,17 @@ def has_discovered_components() -> bool:
     return get_available_components() is not None
 
 
-def get_project_cmakelists(minimal: bool = False) -> str:
-    """Generate the top-level CMakeLists.txt for ESP-IDF project.
-
-    When ``minimal`` is true, omit ``ESPHOME_PROJECT_BUILTIN_COMPONENTS``
-    since ``project_description.json`` may be stale on the first write.
-    """
+def get_project_cmakelists() -> str:
+    """Generate the top-level CMakeLists.txt for ESP-IDF project."""
     # Get IDF target from ESP32 variant (e.g., ESP32S3 -> esp32s3)
     variant = get_esp32_variant()
     idf_target = variant.lower().replace("-", "")
 
-    # esp_idf_size 2.x (bundled with IDF >=6.0) made NG the default and
-    # removed the --ng flag; on 1.x (IDF 5.5) --ng is required to get
-    # --format=raw because the legacy mode doesn't support it.
-    size_ng_flag = "--ng" if idf_version() < cv.Version(6, 0, 0) else ""
-
-    # Project-wide compile options: -D defines and -W warning flags (skip
-    # -Wl, linker flags — those go on the src component via
-    # target_link_options below). Emitted via idf_build_set_property so the
-    # flags propagate to every IDF component (including managed ones like
-    # esphome__micro-mp3) rather than just src/. Required so suppressions
-    # like ``-Wno-error=maybe-uninitialized`` actually silence warnings in
-    # third-party components we don't author.
-    project_compile_opts = [
-        flag
-        for flag in sorted(CORE.build_flags)
-        if flag.startswith("-D")
-        or (flag.startswith("-W") and not flag.startswith("-Wl,"))
-    ]
+    # Extract compile definitions from build flags (-DXXX -> XXX)
+    compile_defs = [flag for flag in sorted(CORE.build_flags) if flag.startswith("-D")]
     extra_compile_options = "\n".join(
-        f'idf_build_set_property(COMPILE_OPTIONS "{flag}" APPEND)'
-        for flag in project_compile_opts
-    )
-
-    cpp_standard_options = (
-        CPP_STANDARD_TEMPLATE.format(standard=CORE.cpp_standard)
-        if CORE.cpp_standard
-        else ""
-    )
-
-    # Per-project list exposed as a CMake variable so converted PIO libs
-    # can reference ${ESPHOME_PROJECT_MANAGED_COMPONENTS} without baking
-    # project-specific names into their cached CMakeLists.
-    #
-    # Emit via idf_build_set_property (not plain set()) so the value is
-    # serialised into build_properties.temp.cmake and visible to IDF's
-    # early requirements-expansion pass (component_get_requirements.cmake
-    # runs as a separate CMake script invocation that doesn't load the
-    # project's top-level CMakeLists; without this, ${ESPHOME_PROJECT_
-    # MANAGED_COMPONENTS} in a converted-lib REQUIRES expands to empty).
-    from esphome.components.esp32 import get_managed_component_require_names
-
-    managed_components_property = "\n".join(
-        f"idf_build_set_property(ESPHOME_PROJECT_MANAGED_COMPONENTS {name} APPEND)"
-        for name in get_managed_component_require_names()
-    )
-
-    # Built-in IDF components exposed via our own property (not IDF's
-    # __COMPONENT_REQUIRES_COMMON, which would append them to every
-    # component's REQUIRES including real IDF components). Referenced by
-    # src/CMakeLists and by each converted PIO lib's CMakeLists. Skipped
-    # on minimal writes because project_description.json may be stale.
-    builtin_components_property = (
-        ""
-        if minimal
-        else "\n".join(
-            f"idf_build_set_property(ESPHOME_PROJECT_BUILTIN_COMPONENTS {name} APPEND)"
-            for name in sorted(get_available_components() or [])
-        )
+        f'idf_build_set_property(COMPILE_OPTIONS "{compile_def}" APPEND)'
+        for compile_def in compile_defs
     )
 
     return f"""\
@@ -157,66 +86,50 @@ set(EXTRA_COMPONENT_DIRS ${{CMAKE_SOURCE_DIR}}/src)
 
 include($ENV{{IDF_PATH}}/tools/cmake/project.cmake)
 
-{cpp_standard_options}
-
 {extra_compile_options}
 
-{managed_components_property}
-
-{builtin_components_property}
-
 project({CORE.name})
-
-# Emit raw JSON size data for ESPHome to read post-build.
-add_custom_command(
-    TARGET ${{CMAKE_PROJECT_NAME}}.elf POST_BUILD
-    COMMAND ${{PYTHON}} -m esp_idf_size {size_ng_flag} --format=raw
-            -o ${{CMAKE_BINARY_DIR}}/esp_idf_size.json
-            ${{CMAKE_PROJECT_NAME}}.map
-    WORKING_DIRECTORY ${{CMAKE_BINARY_DIR}}
-    VERBATIM
-)
 """
 
 
-def get_component_cmakelists() -> str:
-    """Generate the main component CMakeLists.txt.
+def get_component_cmakelists(minimal: bool = False) -> str:
+    """Generate the main component CMakeLists.txt."""
+    idf_requires = [] if minimal else (get_available_components() or [])
+    requires_str = " ".join(idf_requires)
 
-    REQUIRES pulls in the discovered built-in IDF components via the
-    project-level variables set in the top-level CMakeLists.
-    """
-    # Extract linker options (-Wl, flags). Compile flags (-D, -W) are
-    # emitted project-wide via idf_build_set_property in
-    # get_project_cmakelists so they reach every component, not just src/.
+    # Extract compile options (-W flags, excluding linker flags)
+    compile_opts = [
+        flag
+        for flag in CORE.build_flags
+        if flag.startswith("-W") and not flag.startswith("-Wl,")
+    ]
+    compile_opts_str = "\n    ".join(sorted(compile_opts)) if compile_opts else ""
+
+    # Extract linker options (-Wl, flags)
     link_opts = [flag for flag in CORE.build_flags if flag.startswith("-Wl,")]
     link_opts_str = "\n    ".join(sorted(link_opts)) if link_opts else ""
 
     return f"""\
 # Auto-generated by ESPHome
-# CONFIGURE_DEPENDS asks CMake to re-check the glob each build so test
-# runs that reuse the build dir don't compile stale source paths. It's
-# invalid in script mode (cmake -P), which is how IDF's
-# component_get_requirements.cmake includes us, so skip it there.
-if(CMAKE_SCRIPT_MODE_FILE)
-    file(GLOB_RECURSE app_sources
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/*.cpp"
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/*.c"
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/esphome/*.cpp"
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/esphome/*.c"
-    )
-else()
-    file(GLOB_RECURSE app_sources CONFIGURE_DEPENDS
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/*.cpp"
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/*.c"
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/esphome/*.cpp"
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/esphome/*.c"
-    )
-endif()
+file(GLOB_RECURSE app_sources
+    "${{CMAKE_CURRENT_SOURCE_DIR}}/*.cpp"
+    "${{CMAKE_CURRENT_SOURCE_DIR}}/*.c"
+    "${{CMAKE_CURRENT_SOURCE_DIR}}/esphome/*.cpp"
+    "${{CMAKE_CURRENT_SOURCE_DIR}}/esphome/*.c"
+)
 
 idf_component_register(
     SRCS ${{app_sources}}
     INCLUDE_DIRS "." "esphome"
-    REQUIRES ${{ESPHOME_PROJECT_BUILTIN_COMPONENTS}}
+    REQUIRES {requires_str}
+)
+
+# Apply C++ standard
+target_compile_features(${{COMPONENT_LIB}} PUBLIC cxx_std_20)
+
+# ESPHome compile options
+target_compile_options(${{COMPONENT_LIB}} PUBLIC
+    {compile_opts_str}
 )
 
 # ESPHome linker options
@@ -228,17 +141,22 @@ target_link_options(${{COMPONENT_LIB}} PUBLIC
 
 def write_project(minimal: bool = False) -> None:
     """Write ESP-IDF project files."""
+    # Refresh <data_dir>/storage/<name>.yaml.json so the dashboard's
+    # /info and /downloads endpoints can locate the build (they 404
+    # otherwise). This mirrors the PlatformIO build-gen path's call
+    # in build_gen/platformio.py:write_ini().
+    update_storage_json()
     mkdir_p(CORE.build_path)
     mkdir_p(CORE.relative_src_path())
 
     # Write top-level CMakeLists.txt
     write_file_if_changed(
         CORE.relative_build_path("CMakeLists.txt"),
-        get_project_cmakelists(minimal=minimal),
+        get_project_cmakelists(),
     )
 
     # Write component CMakeLists.txt in src/
     write_file_if_changed(
         CORE.relative_src_path("CMakeLists.txt"),
-        get_component_cmakelists(),
+        get_component_cmakelists(minimal=minimal),
     )

esphome/build_gen/platformio.py

@@ -1,7 +1,7 @@
 from esphome.const import __version__
 from esphome.core import CORE
 from esphome.helpers import mkdir_p, read_file, write_file_if_changed
-from esphome.writer import find_begin_end
+from esphome.writer import find_begin_end, update_storage_json
 
 INI_AUTO_GENERATE_BEGIN = "; ========== AUTO GENERATED CODE BEGIN ==========="
 INI_AUTO_GENERATE_END = "; =========== AUTO GENERATED CODE END ============"
@@ -33,27 +33,12 @@ def format_ini(data: dict[str, str | list[str]]) -> str:
     return content
 
 
-# All -std= variants a platform/framework may set by default, in both the GNU
-# and strict dialects; unflagged so the cg.set_cpp_standard() value is the
-# only standard left in the build.
-CPP_STD_VARIANTS = [
-    f"{prefix}{year}"
-    for year in ("11", "14", "17", "20", "23", "26", "2a", "2b", "2c")
-    for prefix in ("gnu++", "c++")
-]
-
-
 def get_ini_content():
     CORE.add_platformio_option(
         "lib_deps",
         [x.as_lib_dep for x in CORE.platformio_libraries.values()]
         + ["${common.lib_deps}"],
     )
-    if CORE.cpp_standard:
-        for variant in CPP_STD_VARIANTS:
-            if variant != CORE.cpp_standard:
-                CORE.add_build_unflag(f"-std={variant}")
-        CORE.add_build_flag(f"-std={CORE.cpp_standard}")
     # Sort to avoid changing build flags order
     CORE.add_platformio_option("build_flags", sorted(CORE.build_flags))
 
@@ -73,6 +58,7 @@ def get_ini_content():
 
 
 def write_ini(content):
+    update_storage_json()
     path = CORE.relative_build_path("platformio.ini")
 
     if path.is_file():

esphome/bundle.py

@@ -260,20 +260,42 @@ class ConfigBundleCreator:
     def _discover_yaml_includes(self) -> None:
         """Discover YAML files loaded during config parsing.
 
-        Delegates to :func:`yaml_util.discover_user_yaml_files`, which does a
-        fresh re-parse and force-loads every deferred ``IncludeFile`` so that
-        *all* potentially-reachable includes are captured (even branches not
-        selected by local substitutions). Bundles are meant to be compiled on
-        another system where command-line substitution overrides may choose a
-        different branch — e.g. ``!include network/${eth_model}/config.yaml``
-        must ship every candidate so the remote build can pick any one.
+        Deliberately uses a fresh re-parse and force-loads every deferred
+        ``IncludeFile`` to include *all* potentially-reachable includes,
+        even branches not selected by the local substitutions. Bundles are
+        meant to be compiled on another system where command-line
+        substitution overrides may choose a different branch — e.g.
+        ``!include network/${eth_model}/config.yaml`` must ship every
+        candidate so the remote build can pick any one.
+
+        Entries with unresolved substitution variables in the filename
+        path are skipped with a warning (they cannot be resolved without
+        the substitution pass).
+
+        Secrets files are tracked separately so we can filter them to
+        only include the keys this config actually references.
         """
-        discovered = yaml_util.discover_user_yaml_files(self._config_path)
-        self._secrets_paths.update(discovered.secrets)
-        config_resolved = self._config_path.resolve()
-        for fpath in discovered.files:
-            if fpath == config_resolved:
+        # Must be a fresh parse: IncludeFile.load() caches its result in
+        # _content, and we discover files by listening for loader calls. On
+        # an already-parsed tree the cache is populated, .load() returns
+        # without calling the loader, the listener never fires, and the
+        # referenced files would be silently dropped from the bundle.
+        with yaml_util.track_yaml_loads() as loaded_files:
+            try:
+                data = yaml_util.load_yaml(self._config_path)
+            except EsphomeError:
+                _LOGGER.debug(
+                    "Bundle: re-loading YAML for include discovery failed, "
+                    "proceeding with partial file list"
+                )
+            else:
+                _force_load_include_files(data)
+
+        for fpath in loaded_files:
+            if fpath == self._config_path.resolve():
                 continue  # Already added as config
+            if fpath.name in const.SECRETS_FILES:
+                self._secrets_paths.add(fpath)
             self._add_file(fpath)
 
     def _discover_component_files(self) -> None:
@@ -412,7 +434,7 @@ class ConfigBundleCreator:
     @staticmethod
     def _add_to_tar(tar: tarfile.TarFile, bf: BundleFile) -> None:
         """Add a BundleFile to the tar archive with deterministic metadata."""
-        with bf.source.open("rb") as f:
+        with open(bf.source, "rb") as f:
             _add_bytes_to_tar(tar, bf.path, f.read())
 
 
@@ -603,6 +625,57 @@ def _add_bytes_to_tar(tar: tarfile.TarFile, name: str, data: bytes) -> None:
     tar.addfile(info, io.BytesIO(data))
 
 
+def _force_load_include_files(obj: Any, _seen: set[int] | None = None) -> None:
+    """Recursively resolve any ``IncludeFile`` instances in a YAML tree.
+
+    Nested ``!include`` returns a deferred ``IncludeFile`` that is only
+    resolved during the substitution pass. During bundle discovery we need
+    the referenced files to actually load so the ``track_yaml_loads``
+    listener fires for them.
+
+    ``IncludeFile`` instances with unresolved substitution variables in the
+    filename cannot be loaded — we skip and warn about those.
+    """
+    if _seen is None:
+        _seen = set()
+
+    if isinstance(obj, yaml_util.IncludeFile):
+        if id(obj) in _seen:
+            return
+        _seen.add(id(obj))
+        if obj.has_unresolved_expressions():
+            _LOGGER.warning(
+                "Bundle: cannot resolve !include %s (referenced from %s) "
+                "with substitutions in path",
+                obj.file,
+                obj.parent_file,
+            )
+            return
+        try:
+            loaded = obj.load()
+        except EsphomeError as err:
+            _LOGGER.warning(
+                "Bundle: failed to load !include %s (referenced from %s): %s",
+                obj.file,
+                obj.parent_file,
+                err,
+            )
+            return
+        _force_load_include_files(loaded, _seen)
+    elif isinstance(obj, dict):
+        if id(obj) in _seen:
+            return
+        _seen.add(id(obj))
+        for value in obj.values():
+            _force_load_include_files(value, _seen)
+    elif isinstance(obj, (list, tuple)):
+        if id(obj) in _seen:
+            return
+        _seen.add(id(obj))
+        for item in obj:
+            _force_load_include_files(item, _seen)
+
+
 def _resolve_include_path(include_path: Any) -> Path | None:
     """Resolve an include path to absolute, skipping system includes."""
     if isinstance(include_path, str) and include_path.startswith("<"):

esphome/compiled_config.py

@@ -1,76 +0,0 @@
-"""Validated-config cache for the upload/logs fast path.
-
-compile dumps the validated config to <data_dir>/storage/<file>.validated.yaml;
-the next upload/logs for that YAML reuses it instead of running the full
-read_config pipeline. YAML round-trip (yaml_util.dump/load_yaml) keeps
-!lambda/!include/IDs/paths intact; mtime gates staleness.
-"""
-
-from __future__ import annotations
-
-import logging
-from pathlib import Path
-
-from esphome.core import CORE
-from esphome.helpers import write_file
-from esphome.storage_json import StorageJSON, ext_storage_path
-from esphome.types import ConfigType
-
-_LOGGER = logging.getLogger(__name__)
-
-
-def compiled_config_path(config_filename: str) -> Path:
-    """Path to the cached validated config alongside the storage sidecar."""
-    return CORE.data_dir / "storage" / f"{config_filename}.validated.yaml"
-
-
-def _cache_is_fresh(cache_path: Path, source_path: Path) -> bool:
-    """True iff the cache file exists and isn't older than the source."""
-    try:
-        return cache_path.stat().st_mtime >= source_path.stat().st_mtime
-    except OSError:
-        return False
-
-
-def save_compiled_config(config: ConfigType) -> None:
-    """Write the validated-config cache. Always-write so mtime stays fresh.
-
-    Mode 0600 because show_secrets=True resolves !secret inline.
-    Failures are non-fatal: the fast path falls back to read_config.
-    """
-    from esphome import yaml_util
-
-    try:
-        rendered = yaml_util.dump(config, show_secrets=True)
-        write_file(compiled_config_path(CORE.config_filename), rendered, private=True)
-    except Exception as err:  # noqa: BLE001  # pylint: disable=broad-except
-        _LOGGER.debug("Skipping compiled config cache write: %s", err)
-
-
-def load_compiled_config(conf_path: Path) -> ConfigType | None:
-    """Load the cached validated config and apply storage metadata to CORE.
-
-    Returns None (caller falls back to read_config) when the cache is
-    missing, older than the source YAML, unparseable, or the sidecar
-    is incomplete.
-    """
-    cache_path = compiled_config_path(conf_path.name)
-    if not _cache_is_fresh(cache_path, conf_path):
-        return None
-
-    from esphome import yaml_util
-
-    try:
-        config = yaml_util.load_yaml(cache_path, clear_secrets=False)
-    except Exception:  # noqa: BLE001  # pylint: disable=broad-except
-        return None
-
-    storage = StorageJSON.load(ext_storage_path(conf_path.name))
-    if storage is None:
-        return None
-    # apply_to_core assumes a real compile wrote the sidecar; wizard-only
-    # sidecars leave both of these unset and can't drive upload/logs.
-    if not storage.core_platform and not storage.target_platform:
-        return None
-    storage.apply_to_core()
-    return config

esphome/components/ade7880/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@kpfleming"]

esphome/components/ade7880/ade7880.cpp

@@ -87,24 +87,14 @@ void ADE7880::update_sensor_from_s16_register16_(sensor::Sensor *sensor, uint16_
   sensor->publish_state(f(val));
 }
 
-void ADE7880::update_active_energy_(PowerChannel *channel, uint16_t a_register) {
-  if (channel->forward_active_energy == nullptr && channel->reverse_active_energy == nullptr) {
+template<typename F>
+void ADE7880::update_sensor_from_s32_register16_(sensor::Sensor *sensor, uint16_t a_register, F &&f) {
+  if (sensor == nullptr) {
     return;
   }
 
-  // The ADE7880 has no separate forward/reverse active energy accumulators. The xWATTHR registers
-  // accumulate signed energy since the last read (positive = imported/forward, negative = exported/
-  // reverse), so split the value by sign into the forward and reverse running totals.
-  float val = this->read_s32_register16_(a_register) / 14400.0f;
-  if (val >= 0.0f) {
-    if (channel->forward_active_energy != nullptr) {
-      channel->forward_active_energy->publish_state(channel->forward_active_energy_total += val);
-    }
-  } else {
-    if (channel->reverse_active_energy != nullptr) {
-      channel->reverse_active_energy->publish_state(channel->reverse_active_energy_total -= val);
-    }
-  }
+  float val = this->read_s32_register16_(a_register);
+  sensor->publish_state(f(val));
 }
 
 void ADE7880::update() {
@@ -127,7 +117,12 @@ void ADE7880::update() {
     this->update_sensor_from_s24zp_register16_(chan->apparent_power, AVA, [](float val) { return val / 100.0f; });
     this->update_sensor_from_s16_register16_(chan->power_factor, APF,
                                              [](float val) { return std::abs(val / -327.68f); });
-    this->update_active_energy_(chan, AWATTHR);
+    this->update_sensor_from_s32_register16_(chan->forward_active_energy, AFWATTHR, [&chan](float val) {
+      return chan->forward_active_energy_total += val / 14400.0f;
+    });
+    this->update_sensor_from_s32_register16_(chan->reverse_active_energy, ARWATTHR, [&chan](float val) {
+      return chan->reverse_active_energy_total += val / 14400.0f;
+    });
   }
 
   if (this->channel_b_ != nullptr) {
@@ -138,7 +133,12 @@ void ADE7880::update() {
     this->update_sensor_from_s24zp_register16_(chan->apparent_power, BVA, [](float val) { return val / 100.0f; });
     this->update_sensor_from_s16_register16_(chan->power_factor, BPF,
                                              [](float val) { return std::abs(val / -327.68f); });
-    this->update_active_energy_(chan, BWATTHR);
+    this->update_sensor_from_s32_register16_(chan->forward_active_energy, BFWATTHR, [&chan](float val) {
+      return chan->forward_active_energy_total += val / 14400.0f;
+    });
+    this->update_sensor_from_s32_register16_(chan->reverse_active_energy, BRWATTHR, [&chan](float val) {
+      return chan->reverse_active_energy_total += val / 14400.0f;
+    });
   }
 
   if (this->channel_c_ != nullptr) {
@@ -149,7 +149,12 @@ void ADE7880::update() {
     this->update_sensor_from_s24zp_register16_(chan->apparent_power, CVA, [](float val) { return val / 100.0f; });
     this->update_sensor_from_s16_register16_(chan->power_factor, CPF,
                                              [](float val) { return std::abs(val / -327.68f); });
-    this->update_active_energy_(chan, CWATTHR);
+    this->update_sensor_from_s32_register16_(chan->forward_active_energy, CFWATTHR, [&chan](float val) {
+      return chan->forward_active_energy_total += val / 14400.0f;
+    });
+    this->update_sensor_from_s32_register16_(chan->reverse_active_energy, CRWATTHR, [&chan](float val) {
+      return chan->reverse_active_energy_total += val / 14400.0f;
+    });
   }
 
   ESP_LOGD(TAG, "update took %" PRIu32 " ms", millis() - start);

esphome/components/ade7880/ade7880.h

@@ -105,8 +105,7 @@ class ADE7880 : public i2c::I2CDevice, public PollingComponent {
   // the callable will be passed a 'float' value and is expected to return a 'float'
   template<typename F> void update_sensor_from_s24zp_register16_(sensor::Sensor *sensor, uint16_t a_register, F &&f);
   template<typename F> void update_sensor_from_s16_register16_(sensor::Sensor *sensor, uint16_t a_register, F &&f);
-
-  void update_active_energy_(PowerChannel *channel, uint16_t a_register);
+  template<typename F> void update_sensor_from_s32_register16_(sensor::Sensor *sensor, uint16_t a_register, F &&f);
 
   void reset_device_();
 

esphome/components/ade7880/ade7880_registers.h

@@ -84,7 +84,9 @@ constexpr uint16_t CWATTHR = 0xE402;
 constexpr uint16_t AFWATTHR = 0xE403;
 constexpr uint16_t BFWATTHR = 0xE404;
 constexpr uint16_t CFWATTHR = 0xE405;
-// 0xE406-0xE408 are reserved on the ADE7880 (it does not implement total reactive energy accumulation)
+constexpr uint16_t ARWATTHR = 0xE406;
+constexpr uint16_t BRWATTHR = 0xE407;
+constexpr uint16_t CRWATTHR = 0xE408;
 constexpr uint16_t AFVARHR = 0xE409;
 constexpr uint16_t BFVARHR = 0xE40A;
 constexpr uint16_t CFVARHR = 0xE40B;

esphome/components/airthings_wave_base/__init__.py

@@ -21,7 +21,7 @@ from esphome.const import (
     UNIT_VOLT,
 )
 
-CODEOWNERS = ["@ncareau", "@jeromelaban"]
+CODEOWNERS = ["@ncareau", "@jeromelaban", "@kpfleming"]
 
 DEPENDENCIES = ["ble_client"]
 

esphome/components/animation/__init__.py

@@ -2,7 +2,6 @@ import logging
 
 from esphome import automation
 import esphome.codegen as cg
-from esphome.components.const import CONF_LOOP
 import esphome.components.image as espImage
 import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_REPEAT
@@ -15,6 +14,7 @@ DEPENDENCIES = ["display"]
 MULTI_CONF = True
 MULTI_CONF_NO_DEFAULT = True
 
+CONF_LOOP = "loop"
 CONF_START_FRAME = "start_frame"
 CONF_END_FRAME = "end_frame"
 CONF_FRAME = "frame"

esphome/components/api/__init__.py

@@ -234,7 +234,7 @@ ACTIONS_SCHEMA = automation.validate_automation(
 
 ENCRYPTION_SCHEMA = cv.Schema(
     {
-        cv.Optional(CONF_KEY): cv.sensitive(validate_encryption_key),
+        cv.Optional(CONF_KEY): validate_encryption_key,
     }
 )
 

esphome/components/api/api.proto

@@ -2026,7 +2026,6 @@ message VoiceAssistantAudio {
 
   bytes data = 1 [(pointer_to_buffer) = true];
   bool end = 2;
-  bytes data2 = 3 [(pointer_to_buffer) = true];
 }
 
 enum VoiceAssistantTimerEvent {

esphome/components/api/api_connection.cpp

@@ -1,6 +1,5 @@
 #include "api_connection.h"
 #ifdef USE_API
-#include "api_connection_buffer.h"  // for encode_to_buffer / get_batch_delay_ms_ inlines
 #ifdef USE_API_NOISE
 #include "api_frame_helper_noise.h"
 #endif
@@ -1169,7 +1168,7 @@ void APIConnection::on_camera_image_request(const CameraImageRequest &msg) {
 void APIConnection::on_get_time_response(const GetTimeResponse &value) {
   if (homeassistant::global_homeassistant_time != nullptr) {
     homeassistant::global_homeassistant_time->set_epoch_time(value.epoch_seconds);
-#if defined(USE_HOMEASSISTANT_TIMEZONE) && defined(USE_TIME_TIMEZONE)
+#ifdef USE_TIME_TIMEZONE
     if (!value.timezone.empty()) {
       // Check if the sender provided pre-parsed timezone data.
       // If std_offset is non-zero or DST rules are present, the parsed data was populated.
@@ -1306,9 +1305,6 @@ void APIConnection::on_voice_assistant_announce_request(const VoiceAssistantAnno
 bool APIConnection::send_voice_assistant_get_configuration_response_(const VoiceAssistantConfigurationRequest &msg) {
   VoiceAssistantConfigurationResponse resp;
   if (!this->check_voice_assistant_api_connection_()) {
-    // send_message encodes synchronously, so this stack local outlives the encode
-    const std::vector<std::string> empty_wake_words;
-    resp.active_wake_words = &empty_wake_words;
     return this->send_message(resp);
   }
 

esphome/components/api/api_connection.h

@@ -11,8 +11,7 @@
 #endif
 #include "api_pb2.h"
 #include "api_pb2_service.h"
-#include "list_entities.h"
-#include "subscribe_state.h"
+#include "api_server.h"
 #include "esphome/core/application.h"
 #include "esphome/core/component.h"
 #ifdef USE_ESP32_CRASH_HANDLER
@@ -37,9 +36,6 @@ class ComponentIterator;
 
 namespace esphome::api {
 
-// Forward-declared to break the api_server.h cycle; full-type inlines are in api_connection_buffer.h.
-class APIServer;
-
 // Keepalive timeout in milliseconds
 static constexpr uint32_t KEEPALIVE_TIMEOUT_MS = 60000;
 // Maximum number of entities to process in a single batch during initial state/info sending
@@ -415,10 +411,44 @@ class APIConnection final : public APIServerConnectionBase {
   // Non-template buffer management for send_message
   bool send_message_(uint32_t payload_size, uint8_t message_type, MessageEncodeFn encode_fn, const void *msg);
 
-  // Core batch encoding logic. ALWAYS_INLINE so encode_fn devirtualizes at hot call sites.
-  // Defined in api_connection_buffer.h (needs APIServer complete).
-  static uint16_t ESPHOME_ALWAYS_INLINE encode_to_buffer(uint32_t calculated_size, MessageEncodeFn encode_fn,
-                                                         const void *msg, APIConnection *conn, uint32_t remaining_size);
+  // Core batch encoding logic. Computes header size, checks fit, resizes buffer, encodes.
+  // ALWAYS_INLINE so the compiler can devirtualize encode_fn at hot call sites.
+  static inline uint16_t ESPHOME_ALWAYS_INLINE encode_to_buffer(uint32_t calculated_size, MessageEncodeFn encode_fn,
+                                                                const void *msg, APIConnection *conn,
+                                                                uint32_t remaining_size) {
+#ifdef HAS_PROTO_MESSAGE_DUMP
+    if (conn->flags_.log_only_mode) {
+      auto *proto_msg = static_cast<const ProtoMessage *>(msg);
+      DumpBuffer dump_buf;
+      conn->log_send_message_(proto_msg->message_name(), proto_msg->dump_to(dump_buf));
+      return 1;
+    }
+#endif
+    const uint8_t footer_size = conn->helper_->frame_footer_size();
+
+    // First message uses max padding (already in buffer), subsequent use exact header size
+    size_t to_add;
+    if (conn->flags_.batch_first_message) {
+      conn->flags_.batch_first_message = false;
+      conn->batch_header_size_ = conn->helper_->frame_header_padding();
+      to_add = calculated_size;
+    } else {
+      conn->batch_header_size_ = conn->helper_->frame_header_size(calculated_size, conn->batch_message_type_);
+      to_add = calculated_size + conn->batch_header_size_ + footer_size;
+    }
+
+    // Check if it fits (using actual header size, not max padding)
+    uint16_t total_calculated_size = calculated_size + conn->batch_header_size_ + footer_size;
+    if (total_calculated_size > remaining_size)
+      return 0;
+
+    auto &shared_buf = conn->parent_->get_shared_buffer_ref();
+    shared_buf.resize(shared_buf.size() + to_add);
+    ProtoWriteBuffer buffer{&shared_buf, shared_buf.size() - calculated_size};
+    encode_fn(msg, buffer PROTO_ENCODE_DEBUG_INIT(&shared_buf));
+
+    return total_calculated_size;
+  }
 
   // Noinline version of encode_to_buffer for cold paths (entity info, zero-payload messages).
   // All cold callers share this single copy instead of each getting an ALWAYS_INLINE expansion.
@@ -762,8 +792,7 @@ class APIConnection final : public APIServerConnectionBase {
   // Read by process_batch_multi_ to pass into MessageInfo.
   uint8_t batch_header_size_{0};
 
-  // Defined in api_connection_buffer.h (needs APIServer complete).
-  uint32_t get_batch_delay_ms_() const;
+  uint32_t get_batch_delay_ms_() const { return this->parent_->get_batch_delay(); }
   // Message will use 8 more bytes than the minimum size, and typical
   // MTU is 1500. Sometimes users will see as low as 1460 MTU.
   // If its IPv6 the header is 40 bytes, and if its IPv4

esphome/components/api/api_connection_buffer.h

@@ -1,54 +0,0 @@
-#pragma once
-
-#include "esphome/core/defines.h"
-#ifdef USE_API
-
-// Inline APIConnection methods that need APIServer complete. Include this
-// instead of api_connection.h when calling encode_to_buffer or get_batch_delay_ms_.
-
-#include "api_connection.h"
-#include "api_server.h"
-
-namespace esphome::api {
-
-inline uint16_t ESPHOME_ALWAYS_INLINE APIConnection::encode_to_buffer(uint32_t calculated_size,
-                                                                      MessageEncodeFn encode_fn, const void *msg,
-                                                                      APIConnection *conn, uint32_t remaining_size) {
-#ifdef HAS_PROTO_MESSAGE_DUMP
-  if (conn->flags_.log_only_mode) {
-    auto *proto_msg = static_cast<const ProtoMessage *>(msg);
-    DumpBuffer dump_buf;
-    conn->log_send_message_(proto_msg->message_name(), proto_msg->dump_to(dump_buf));
-    return 1;
-  }
-#endif
-  const uint8_t footer_size = conn->helper_->frame_footer_size();
-
-  // First message uses max padding (already in buffer), subsequent use exact header size
-  size_t to_add;
-  if (conn->flags_.batch_first_message) {
-    conn->flags_.batch_first_message = false;
-    conn->batch_header_size_ = conn->helper_->frame_header_padding();
-    to_add = calculated_size;
-  } else {
-    conn->batch_header_size_ = conn->helper_->frame_header_size(calculated_size, conn->batch_message_type_);
-    to_add = calculated_size + conn->batch_header_size_ + footer_size;
-  }
-
-  // Check if it fits (using actual header size, not max padding)
-  uint16_t total_calculated_size = calculated_size + conn->batch_header_size_ + footer_size;
-  if (total_calculated_size > remaining_size)
-    return 0;
-
-  auto &shared_buf = conn->parent_->get_shared_buffer_ref();
-  shared_buf.resize(shared_buf.size() + to_add);
-  ProtoWriteBuffer buffer{&shared_buf, shared_buf.size() - calculated_size};
-  encode_fn(msg, buffer PROTO_ENCODE_DEBUG_INIT(&shared_buf));
-
-  return total_calculated_size;
-}
-
-inline uint32_t APIConnection::get_batch_delay_ms_() const { return this->parent_->get_batch_delay(); }
-
-}  // namespace esphome::api
-#endif

esphome/components/api/api_pb2.cpp

@@ -2893,11 +2893,6 @@ bool VoiceAssistantAudio::decode_length(uint32_t field_id, ProtoLengthDelimited
       this->data_len = value.size();
       break;
     }
-    case 3: {
-      this->data2 = value.data();
-      this->data2_len = value.size();
-      break;
-    }
     default:
       return false;
   }
@@ -2907,14 +2902,12 @@ uint8_t *VoiceAssistantAudio::encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG
   uint8_t *__restrict__ pos = buffer.get_pos();
   ProtoEncode::encode_bytes(pos PROTO_ENCODE_DEBUG_ARG, 1, this->data, this->data_len);
   ProtoEncode::encode_bool(pos PROTO_ENCODE_DEBUG_ARG, 2, this->end);
-  ProtoEncode::encode_bytes(pos PROTO_ENCODE_DEBUG_ARG, 3, this->data2, this->data2_len);
   return pos;
 }
 uint32_t VoiceAssistantAudio::calculate_size() const {
   uint32_t size = 0;
   size += ProtoSize::calc_length(1, this->data_len);
   size += ProtoSize::calc_bool(1, this->end);
-  size += ProtoSize::calc_length(1, this->data2_len);
   return size;
 }
 bool VoiceAssistantTimerEventResponse::decode_varint(uint32_t field_id, proto_varint_value_t value) {

esphome/components/api/api_pb2.h

@@ -2436,15 +2436,13 @@ class VoiceAssistantEventResponse final : public ProtoDecodableMessage {
 class VoiceAssistantAudio final : public ProtoDecodableMessage {
  public:
   static constexpr uint8_t MESSAGE_TYPE = 106;
-  static constexpr uint8_t ESTIMATED_SIZE = 40;
+  static constexpr uint8_t ESTIMATED_SIZE = 21;
 #ifdef HAS_PROTO_MESSAGE_DUMP
   const LogString *message_name() const override { return LOG_STR("voice_assistant_audio"); }
 #endif
   const uint8_t *data{nullptr};
   uint16_t data_len{0};
   bool end{false};
-  const uint8_t *data2{nullptr};
-  uint16_t data2_len{0};
   uint8_t *encode(ProtoWriteBuffer &buffer PROTO_ENCODE_DEBUG_PARAM) const;
   uint32_t calculate_size() const;
 #ifdef HAS_PROTO_MESSAGE_DUMP

esphome/components/api/api_pb2_dump.cpp

@@ -2174,7 +2174,6 @@ const char *VoiceAssistantAudio::dump_to(DumpBuffer &out) const {
   MessageDumpHelper helper(out, ESPHOME_PSTR("VoiceAssistantAudio"));
   dump_bytes_field(out, ESPHOME_PSTR("data"), this->data, this->data_len);
   dump_field(out, ESPHOME_PSTR("end"), this->end);
-  dump_bytes_field(out, ESPHOME_PSTR("data2"), this->data2, this->data2_len);
   return out.c_str();
 }
 const char *VoiceAssistantTimerEventResponse::dump_to(DumpBuffer &out) const {

esphome/components/api/api_server.cpp

@@ -1,7 +1,6 @@
 #include "api_server.h"
 #ifdef USE_API
 #include <cerrno>
-#include <cinttypes>
 #include "api_connection.h"
 #include "esphome/components/network/util.h"
 #include "esphome/core/application.h"
@@ -31,6 +30,11 @@ APIServer *global_api_server = nullptr;  // NOLINT(cppcoreguidelines-avoid-non-c
 
 APIServer::APIServer() { global_api_server = this; }
 
+// Custom deleter defined here so `delete` sees the complete APIConnection type.
+// This prevents libc++ from emitting an "incomplete type" error when other
+// translation units only have the forward declaration of APIConnection.
+void APIServer::APIConnectionDeleter::operator()(APIConnection *p) const { delete p; }
+
 void APIServer::socket_failed_(const LogString *msg) {
   ESP_LOGW(TAG, "Socket %s: errno %d", LOG_STR_ARG(msg), errno);
   this->destroy_socket_();
@@ -186,12 +190,8 @@ void APIServer::remove_client_(uint8_t client_index) {
   if (client_index < last_index) {
     std::swap(this->clients_[client_index], this->clients_[last_index]);
   }
-  // Drop the count before resetting the slot. reset() runs ~APIConnection(), which can reenter the
-  // server (e.g. voice_assistant unsubscribes in its disconnect trigger, publishing entity state ->
-  // on_*_update iterating active_clients()). Excluding the dying slot from the active range first
-  // keeps that reentrant iteration from dereferencing the now-null slot.
-  this->api_connection_count_--;
   this->clients_[last_index].reset();
+  this->api_connection_count_--;
 
   // Last client disconnected - set warning and start tracking for reboot timeout
   if (this->api_connection_count_ == 0 && this->reboot_timeout_ != 0) {
@@ -682,7 +682,7 @@ uint32_t APIServer::register_active_action_call(uint32_t client_call_id, APIConn
   // Schedule automatic cleanup after timeout (client will have given up by then)
   // Uses numeric ID overload to avoid heap allocation from str_sprintf
   this->set_timeout(action_call_id, USE_API_ACTION_CALL_TIMEOUT_MS, [this, action_call_id]() {
-    ESP_LOGD(TAG, "Action call %" PRIu32 " timed out", action_call_id);
+    ESP_LOGD(TAG, "Action call %u timed out", action_call_id);
     this->unregister_active_action_call(action_call_id);
   });
 
@@ -726,7 +726,7 @@ void APIServer::send_action_response(uint32_t action_call_id, bool success, Stri
       return;
     }
   }
-  ESP_LOGW(TAG, "Cannot send response: no active call found for action_call_id %" PRIu32, action_call_id);
+  ESP_LOGW(TAG, "Cannot send response: no active call found for action_call_id %u", action_call_id);
 }
 #ifdef USE_API_USER_DEFINED_ACTION_RESPONSES_JSON
 void APIServer::send_action_response(uint32_t action_call_id, bool success, StringRef error_message,
@@ -738,7 +738,7 @@ void APIServer::send_action_response(uint32_t action_call_id, bool success, Stri
       return;
     }
   }
-  ESP_LOGW(TAG, "Cannot send response: no active call found for action_call_id %" PRIu32, action_call_id);
+  ESP_LOGW(TAG, "Cannot send response: no active call found for action_call_id %u", action_call_id);
 }
 #endif  // USE_API_USER_DEFINED_ACTION_RESPONSES_JSON
 #endif  // USE_API_USER_DEFINED_ACTION_RESPONSES

esphome/components/api/api_server.h

@@ -3,8 +3,6 @@
 #include "esphome/core/defines.h"
 #ifdef USE_API
 #include "api_buffer.h"
-// Must precede clients_ so APIConnection is complete for default_delete (libc++).
-#include "api_connection.h"
 #include "api_noise_context.h"
 #include "api_pb2.h"
 #include "api_pb2_service.h"
@@ -14,6 +12,8 @@
 #include "esphome/core/controller.h"
 #include "esphome/core/log.h"
 #include "esphome/core/string_ref.h"
+#include "list_entities.h"
+#include "subscribe_state.h"
 #ifdef USE_LOGGER
 #include "esphome/components/logger/logger.h"
 #endif
@@ -191,9 +191,15 @@ class APIServer final : public Component,
   bool is_connected_with_state_subscription() const;
 
   // Range-for view over the populated slice [0, api_connection_count_). Read-only with respect
-  // to ownership; callers get `const unique_ptr&` so they can invoke non-const methods on the
+  // to ownership — callers get `const unique_ptr&` so they can invoke non-const methods on the
   // APIConnection but cannot reset/move the slot and break the count invariant.
-  using APIConnectionPtr = std::unique_ptr<APIConnection>;
+  // Custom deleter is defined out-of-line in api_server.cpp so libc++ does not
+  // eagerly instantiate `delete static_cast<APIConnection *>(p)` here, where
+  // only the forward declaration of APIConnection is visible (incomplete type).
+  struct APIConnectionDeleter {
+    void operator()(APIConnection *p) const;
+  };
+  using APIConnectionPtr = std::unique_ptr<APIConnection, APIConnectionDeleter>;
   class ActiveClientsView {
     const APIConnectionPtr *begin_;
     const APIConnectionPtr *end_;

esphome/components/api/client.py

@@ -101,14 +101,13 @@ async def async_run_logs(
         client_info=f"ESPHome Logs {__version__}",
         noise_psk=noise_psk,
         addresses=addresses,  # Pass all addresses for automatic retry
-        provide_time=False,
     )
 
     # Try platform-specific stacktrace handler first, fall back to generic
     platform_process_stacktrace = None
     try:
         module = importlib.import_module("esphome.components." + CORE.target_platform)
-        platform_process_stacktrace = module.process_stacktrace
+        platform_process_stacktrace = getattr(module, "process_stacktrace")
     except (AttributeError, ImportError):
         _LOGGER.info(
             'Stacktrace analysis is unavailable: no compatible analyzer found for target platform "%s".',
@@ -119,7 +118,7 @@ async def async_run_logs(
 
     def on_log(msg: SubscribeLogsResponse) -> None:
         """Handle a new log message."""
-        time_ = datetime.now().astimezone()
+        time_ = datetime.now()
         message: bytes = msg.message
         text = message.decode("utf8", "backslashreplace")
         nanoseconds = time_.microsecond // 1000

esphome/components/as5600/__init__.py

@@ -100,7 +100,7 @@ def position(min=-MAX_POSITION, max=MAX_POSITION):
         if isinstance(value, str) and value.endswith("%"):
             value = percent_to_position(value)
 
-        if isinstance(value, str) and value.endswith(("°", "deg")):
+        if isinstance(value, str) and (value.endswith("°") or value.endswith("deg")):
             return angle_to_position(
                 value,
                 min=round(min * POSITION_TO_ANGLE),

esphome/components/audio/__init__.py

@@ -335,7 +335,7 @@ async def to_code(config):
 
     add_idf_component(
         name="esphome/esp-audio-libs",
-        ref="3.2.1",
+        ref="3.0.0",
     )
 
     data = _get_data()
@@ -395,7 +395,7 @@ async def to_code(config):
         )
     if data.mp3_support:
         cg.add_define("USE_AUDIO_MP3_SUPPORT")
-        add_idf_component(name="esphome/micro-mp3", ref="0.2.1")
+        add_idf_component(name="esphome/micro-mp3", ref="0.2.0")
         _emit_memory_pair(
             data.mp3.buffer_memory,
             "CONFIG_MP3_DECODER_PREFER_PSRAM",

esphome/components/audio/audio.h

@@ -1,7 +1,6 @@
 #pragma once
 
 #include "esphome/core/defines.h"
-#include "esphome/core/helpers.h"  // for ESPDEPRECATED
 
 #include <cstddef>
 #include <cstdint>
@@ -144,8 +143,6 @@ AudioFileType detect_audio_file_type(const char *content_type, const char *url);
 /// @param output_buffer Buffer to store the scaled samples
 /// @param scale_factor Q15 fixed point scaling factor
 /// @param samples_to_scale Number of samples to scale
-// Remove before 2026.12.0
-ESPDEPRECATED("Use esp_audio_libs::gain::apply() (from <gain.h>) instead. Removed in 2026.12.0.", "2026.6.0")
 void scale_audio_samples(const int16_t *audio_samples, int16_t *output_buffer, int16_t scale_factor,
                          size_t samples_to_scale);
 

esphome/components/audio/audio_decoder.cpp

@@ -9,12 +9,9 @@ namespace esphome::audio {
 
 static const char *const TAG = "audio.decoder";
 
+static const uint32_t DECODING_TIMEOUT_MS = 50;    // The decode function will yield after this duration
 static const uint32_t READ_WRITE_TIMEOUT_MS = 20;  // Timeout for transferring audio data
 
-// Max consecutive decode iterations that consume input but produce no output; e.g., skipping a large metadata block,
-// before yielding and returning.
-static const uint8_t MAX_NO_OUTPUT_ITERATIONS = 32;
-
 static const uint32_t MAX_POTENTIALLY_FAILED_COUNT = 10;
 
 AudioDecoder::AudioDecoder(size_t input_buffer_size, size_t output_buffer_size)
@@ -23,13 +20,11 @@ AudioDecoder::AudioDecoder(size_t input_buffer_size, size_t output_buffer_size)
 }
 
 esp_err_t AudioDecoder::add_source(std::weak_ptr<ring_buffer::RingBuffer> &input_ring_buffer) {
-  // Zero-copy source reading directly from the ring buffer's internal storage. Raw file data is byte
-  // aligned, so no frame alignment is required.
-  auto source = RingBufferAudioSource::create(input_ring_buffer.lock(), this->input_buffer_size_);
+  auto source = AudioSourceTransferBuffer::create(this->input_buffer_size_);
   if (source == nullptr) {
-    // create() only returns nullptr for invalid arguments (expired ring buffer or zero buffer size)
-    return ESP_ERR_INVALID_ARG;
+    return ESP_ERR_NO_MEM;
   }
+  source->set_source(input_ring_buffer);
   this->input_buffer_ = std::move(source);
   return ESP_OK;
 }
@@ -146,7 +141,13 @@ AudioDecoderState AudioDecoder::decode(bool stop_gracefully) {
   }
 
   FileDecoderState state = FileDecoderState::MORE_TO_PROCESS;
-  uint8_t no_output_iterations = 0;
+
+  uint32_t decoding_start = millis();
+
+  bool first_loop_iteration = true;
+
+  size_t bytes_processed = 0;
+  size_t bytes_available_before_processing = 0;
 
   while (state == FileDecoderState::MORE_TO_PROCESS) {
     // Transfer decoded out
@@ -160,39 +161,45 @@ AudioDecoderState AudioDecoder::decode(bool stop_gracefully) {
         this->playback_ms_ +=
             this->audio_stream_info_.value().frames_to_milliseconds_with_remainder(&this->accumulated_frames_written_);
       }
-
-      if ((bytes_written > 0) && (this->output_transfer_buffer_->available() == 0)) {
-        // All decoded audio has been flushed to the sink; return so the caller can react to stop/pause before
-        // decoding the next batch
-        return AudioDecoderState::DECODING;
-      }
     } else {
       // If paused, block to avoid wasting CPU resources
       delay(READ_WRITE_TIMEOUT_MS);
     }
 
-    if (this->output_transfer_buffer_->available() > 0) {
-      // Output transfer buffer indicates backpressure, return so caller can handle other events;
-      // e.g., stop/pause, before trying again
+    // Verify there is enough space to store more decoded audio and that the function hasn't been running too long
+    if ((this->output_transfer_buffer_->free() < this->free_buffer_required_) ||
+        (millis() - decoding_start > DECODING_TIMEOUT_MS)) {
       return AudioDecoderState::DECODING;
     }
 
-    // Reaching here means no decoded output is pending (any would have returned above). Bounds long no-output
-    // stretches; e.g., skipping a large metadata block, so a source that keeps the ring buffer full can't spin this
-    // loop without yielding and trip the watchdog. The delay yields allowing other tasks to feed the watchdog and
-    // the return keeps stop/pause responsive.
-    if (++no_output_iterations >= MAX_NO_OUTPUT_ITERATIONS) {
-      delay(1);
-      return AudioDecoderState::DECODING;
+    // Decode more audio
+
+    // Never shift the input buffer; every decoder buffers internally and consumes only what it processed.
+    size_t bytes_read = this->input_buffer_->fill(pdMS_TO_TICKS(READ_WRITE_TIMEOUT_MS), false);
+
+    if (!first_loop_iteration && (this->input_buffer_->available() < bytes_processed)) {
+      // Less data is available than what was processed in last iteration, so don't attempt to decode.
+      // This attempts to avoid the decoder from consistently trying to decode an incomplete frame. The transfer buffer
+      // will shift the remaining data to the start and copy more from the source the next time the decode function is
+      // called
+      break;
     }
 
-    // Expose the next chunk of file data. Every decoder buffers internally and consumes only what it
-    // processed, so the source does not need to accumulate or stitch chunks across fill() calls.
-    this->input_buffer_->fill(pdMS_TO_TICKS(READ_WRITE_TIMEOUT_MS), false);
+    bytes_available_before_processing = this->input_buffer_->available();
 
-    const size_t available_before_decode = this->input_buffer_->available();
+    if ((this->potentially_failed_count_ > 0) && (bytes_read == 0)) {
+      // Failed to decode in last attempt and there is no new data
 
-    if (available_before_decode == 0) {
+      if ((this->input_buffer_->free() == 0) && first_loop_iteration) {
+        // The input buffer is full (or read-only, e.g. const flash source). Since it previously failed on the exact
+        // same data, we can never recover. For const sources this is correct: the entire file is already available, so
+        // a decode failure is genuine, not a transient out-of-data condition.
+        state = FileDecoderState::FAILED;
+      } else {
+        // Attempt to get more data next time
+        state = FileDecoderState::IDLE;
+      }
+    } else if (this->input_buffer_->available() == 0) {
       // No data to decode, attempt to get more data next time
       state = FileDecoderState::IDLE;
     } else {
@@ -224,6 +231,9 @@ AudioDecoderState AudioDecoder::decode(bool stop_gracefully) {
       }
     }
 
+    first_loop_iteration = false;
+    bytes_processed = bytes_available_before_processing - this->input_buffer_->available();
+
     if (state == FileDecoderState::POTENTIALLY_FAILED) {
       ++this->potentially_failed_count_;
     } else if (state == FileDecoderState::END_OF_FILE) {
@@ -231,16 +241,7 @@ AudioDecoderState AudioDecoder::decode(bool stop_gracefully) {
     } else if (state == FileDecoderState::FAILED) {
       return AudioDecoderState::FAILED;
     } else if (state == FileDecoderState::MORE_TO_PROCESS) {
-      // Reset the failsafe only when the iteration made forward progress: input was consumed or output was
-      // produced (output_transfer_buffer_ is drained empty above, so any available bytes are new). A
-      // MORE_TO_PROCESS that neither consumes input nor produces output means the decoder is stalled; count it
-      // toward the failsafe so a stuck stream eventually surfaces as FAILED instead of looping forever.
-      if ((this->input_buffer_->available() < available_before_decode) ||
-          (this->output_transfer_buffer_->available() > 0)) {
-        this->potentially_failed_count_ = 0;
-      } else {
-        ++this->potentially_failed_count_;
-      }
+      this->potentially_failed_count_ = 0;
     }
   }
   return AudioDecoderState::DECODING;

esphome/components/audio/audio_decoder.h

@@ -61,16 +61,15 @@ class AudioDecoder {
    */
  public:
   /// @brief Allocates the output transfer buffer and stores the input buffer size for later use by add_source()
-  /// @param input_buffer_size Soft cap on the bytes a ring buffer source exposes per fill, in bytes.
+  /// @param input_buffer_size Size of the input transfer buffer in bytes.
   /// @param output_buffer_size Size of the output transfer buffer in bytes.
   AudioDecoder(size_t input_buffer_size, size_t output_buffer_size);
 
   ~AudioDecoder() = default;
 
-  /// @brief Adds a source ring buffer for raw file data. Shares ownership of the ring buffer via a shared_ptr.
-  /// The decoder reads directly from the ring buffer's internal storage with a zero-copy RingBufferAudioSource.
-  /// @param input_ring_buffer weak_ptr of the source ring buffer to read from
-  /// @return ESP_OK if successful, ESP_ERR_INVALID_ARG if the ring buffer is expired or the buffer size is zero
+  /// @brief Adds a source ring buffer for raw file data. Takes ownership of the ring buffer in a shared_ptr.
+  /// @param input_ring_buffer weak_ptr of a shared_ptr of the sink ring buffer to transfer ownership
+  /// @return ESP_OK if successsful, ESP_ERR_NO_MEM if the transfer buffer wasn't allocated
   esp_err_t add_source(std::weak_ptr<ring_buffer::RingBuffer> &input_ring_buffer);
 
   /// @brief Adds a sink ring buffer for decoded audio. Takes ownership of the ring buffer in a shared_ptr.

esphome/components/audio/audio_resampler.cpp

@@ -12,17 +12,16 @@ static const uint32_t READ_WRITE_TIMEOUT_MS = 20;
 
 AudioResampler::AudioResampler(size_t input_buffer_size, size_t output_buffer_size)
     : input_buffer_size_(input_buffer_size), output_buffer_size_(output_buffer_size) {
+  this->input_transfer_buffer_ = AudioSourceTransferBuffer::create(input_buffer_size);
   this->output_transfer_buffer_ = AudioSinkTransferBuffer::create(output_buffer_size);
 }
 
 esp_err_t AudioResampler::add_source(std::weak_ptr<ring_buffer::RingBuffer> &input_ring_buffer) {
-  // The zero-copy RingBufferAudioSource is created lazily on the first resample() call, once both the ring
-  // buffer (stored here) and the input stream info (set by start()) are available, in either order.
-  this->source_ring_buffer_ = input_ring_buffer.lock();
-  if (this->source_ring_buffer_ == nullptr) {
-    return ESP_ERR_INVALID_STATE;
+  if (this->input_transfer_buffer_ != nullptr) {
+    this->input_transfer_buffer_->set_source(input_ring_buffer);
+    return ESP_OK;
   }
-  return ESP_OK;
+  return ESP_ERR_NO_MEM;
 }
 
 esp_err_t AudioResampler::add_sink(std::weak_ptr<ring_buffer::RingBuffer> &output_ring_buffer) {
@@ -48,7 +47,7 @@ esp_err_t AudioResampler::start(AudioStreamInfo &input_stream_info, AudioStreamI
   this->input_stream_info_ = input_stream_info;
   this->output_stream_info_ = output_stream_info;
 
-  if (this->output_transfer_buffer_ == nullptr) {
+  if ((this->input_transfer_buffer_ == nullptr) || (this->output_transfer_buffer_ == nullptr)) {
     return ESP_ERR_NO_MEM;
   }
 
@@ -57,13 +56,6 @@ esp_err_t AudioResampler::start(AudioStreamInfo &input_stream_info, AudioStreamI
     return ESP_ERR_NOT_SUPPORTED;
   }
 
-  // Reject frame sizes that can't be used as the zero-copy source's alignment up front, where the caller checks
-  // the return code. The lazy create() in resample() keeps its own guard since it runs before the uint8_t cast.
-  const size_t bytes_per_frame = this->input_stream_info_.frames_to_bytes(1);
-  if ((bytes_per_frame == 0) || (bytes_per_frame > RingBufferAudioSource::MAX_ALIGNMENT_BYTES)) {
-    return ESP_ERR_NOT_SUPPORTED;
-  }
-
   if ((input_stream_info.get_sample_rate() != output_stream_info.get_sample_rate()) ||
       (input_stream_info.get_bits_per_sample() != output_stream_info.get_bits_per_sample())) {
     this->resampler_ = make_unique<esp_audio_libs::resampler::Resampler>(
@@ -95,27 +87,8 @@ esp_err_t AudioResampler::start(AudioStreamInfo &input_stream_info, AudioStreamI
 }
 
 AudioResamplerState AudioResampler::resample(bool stop_gracefully, int32_t *ms_differential) {
-  if (this->audio_source_ == nullptr) {
-    // Lazily create the zero-copy source on first use. Frame-aligned reads ensure multi-channel frames are
-    // never split across the ring buffer's wrap boundary.
-    const size_t bytes_per_frame = this->input_stream_info_.frames_to_bytes(1);
-    if ((bytes_per_frame == 0) || (bytes_per_frame > RingBufferAudioSource::MAX_ALIGNMENT_BYTES)) {
-      // Stream info is unset or the frame is too large to use as an alignment; the uint8_t cast below would
-      // truncate it and could yield a source that tears frames.
-      return AudioResamplerState::FAILED;
-    }
-    // Pass the shared_ptr by copy so a failed create() leaves source_ring_buffer_ intact; release our
-    // reference only after the source has taken ownership.
-    this->audio_source_ = RingBufferAudioSource::create(this->source_ring_buffer_, this->input_buffer_size_,
-                                                        static_cast<uint8_t>(bytes_per_frame));
-    if (this->audio_source_ == nullptr) {
-      return AudioResamplerState::FAILED;
-    }
-    this->source_ring_buffer_.reset();
-  }
-
   if (stop_gracefully) {
-    if (!this->audio_source_->has_buffered_data() && (this->output_transfer_buffer_->available() == 0)) {
+    if (!this->input_transfer_buffer_->has_buffered_data() && (this->output_transfer_buffer_->available() == 0)) {
       return AudioResamplerState::FINISHED;
     }
   }
@@ -129,11 +102,9 @@ AudioResamplerState AudioResampler::resample(bool stop_gracefully, int32_t *ms_d
     delay(READ_WRITE_TIMEOUT_MS);
   }
 
-  // Expose a chunk of the ring buffer's internal storage. pre_shift is ignored by RingBufferAudioSource
-  // (there is no intermediate transfer buffer to compact).
-  this->audio_source_->fill(pdMS_TO_TICKS(READ_WRITE_TIMEOUT_MS), false);
+  this->input_transfer_buffer_->transfer_data_from_source(pdMS_TO_TICKS(READ_WRITE_TIMEOUT_MS));
 
-  if (this->audio_source_->available() == 0) {
+  if (this->input_transfer_buffer_->available() == 0) {
     // No samples available to process
     return AudioResamplerState::RESAMPLING;
   }
@@ -141,17 +112,17 @@ AudioResamplerState AudioResampler::resample(bool stop_gracefully, int32_t *ms_d
   const size_t bytes_free = this->output_transfer_buffer_->free();
   const uint32_t frames_free = this->output_stream_info_.bytes_to_frames(bytes_free);
 
-  const size_t bytes_available = this->audio_source_->available();
+  const size_t bytes_available = this->input_transfer_buffer_->available();
   const uint32_t frames_available = this->input_stream_info_.bytes_to_frames(bytes_available);
 
   if ((this->input_stream_info_.get_sample_rate() != this->output_stream_info_.get_sample_rate()) ||
       (this->input_stream_info_.get_bits_per_sample() != this->output_stream_info_.get_bits_per_sample())) {
     // Adjust gain by -3 dB to avoid clipping due to the resampling process
     esp_audio_libs::resampler::ResamplerResults results =
-        this->resampler_->resample(this->audio_source_->data(), this->output_transfer_buffer_->get_buffer_end(),
-                                   frames_available, frames_free, -3);
+        this->resampler_->resample(this->input_transfer_buffer_->get_buffer_start(),
+                                   this->output_transfer_buffer_->get_buffer_end(), frames_available, frames_free, -3);
 
-    this->audio_source_->consume(this->input_stream_info_.frames_to_bytes(results.frames_used));
+    this->input_transfer_buffer_->decrease_buffer_length(this->input_stream_info_.frames_to_bytes(results.frames_used));
     this->output_transfer_buffer_->increase_buffer_length(
         this->output_stream_info_.frames_to_bytes(results.frames_generated));
 
@@ -175,10 +146,10 @@ AudioResamplerState AudioResampler::resample(bool stop_gracefully, int32_t *ms_d
     const size_t bytes_to_transfer = std::min(this->output_stream_info_.frames_to_bytes(frames_free),
                                               this->input_stream_info_.frames_to_bytes(frames_available));
 
-    std::memcpy((void *) this->output_transfer_buffer_->get_buffer_end(), (const void *) this->audio_source_->data(),
-                bytes_to_transfer);
+    std::memcpy((void *) this->output_transfer_buffer_->get_buffer_end(),
+                (void *) this->input_transfer_buffer_->get_buffer_start(), bytes_to_transfer);
 
-    this->audio_source_->consume(bytes_to_transfer);
+    this->input_transfer_buffer_->decrease_buffer_length(bytes_to_transfer);
     this->output_transfer_buffer_->increase_buffer_length(bytes_to_transfer);
   }
 

esphome/components/audio/audio_resampler.h

@@ -22,7 +22,7 @@ namespace esphome::audio {
 enum class AudioResamplerState : uint8_t {
   RESAMPLING,  // More data is available to resample
   FINISHED,    // All file data has been resampled and transferred
-  FAILED,      // Failed to allocate the audio source
+  FAILED,      // Unused state included for consistency among Audio classes
 };
 
 class AudioResampler {
@@ -32,16 +32,14 @@ class AudioResampler {
    * component). Also supports converting bits per sample.
    */
  public:
-  /// @brief Allocates the output transfer buffer. The input source is created later in resample().
-  /// @param input_buffer_size Max bytes exposed per fill() call on the zero-copy input source.
+  /// @brief Allocates the input and output transfer buffers
+  /// @param input_buffer_size Size of the input transfer buffer in bytes.
   /// @param output_buffer_size Size of the output transfer buffer in bytes.
   AudioResampler(size_t input_buffer_size, size_t output_buffer_size);
 
-  /// @brief Sets the ring buffer the audio is read from and takes shared ownership of it. The zero-copy
-  /// RingBufferAudioSource that reads directly from its internal storage is created lazily on the first
-  /// resample() call, so add_source() and start() may be called in any order.
-  /// @param input_ring_buffer weak_ptr of a shared_ptr of the source ring buffer to transfer ownership
-  /// @return ESP_OK if successful, ESP_ERR_INVALID_STATE if the ring buffer is no longer alive
+  /// @brief Adds a source ring buffer for audio data. Takes ownership of the ring buffer in a shared_ptr.
+  /// @param input_ring_buffer weak_ptr of a shared_ptr of the sink ring buffer to transfer ownership
+  /// @return ESP_OK if successsful, ESP_ERR_NO_MEM if the transfer buffer wasn't allocated
   esp_err_t add_source(std::weak_ptr<ring_buffer::RingBuffer> &input_ring_buffer);
 
   /// @brief Adds a sink ring buffer for resampled audio. Takes ownership of the ring buffer in a shared_ptr.
@@ -80,8 +78,7 @@ class AudioResampler {
   void set_pause_output_state(bool pause_state) { this->pause_output_ = pause_state; }
 
  protected:
-  std::shared_ptr<ring_buffer::RingBuffer> source_ring_buffer_;
-  std::unique_ptr<RingBufferAudioSource> audio_source_;
+  std::unique_ptr<AudioSourceTransferBuffer> input_transfer_buffer_;
   std::unique_ptr<AudioSinkTransferBuffer> output_transfer_buffer_;
 
   size_t input_buffer_size_;

esphome/components/audio/audio_transfer_buffer.cpp

@@ -207,153 +207,6 @@ void ConstAudioSourceBuffer::consume(size_t bytes) {
   this->data_start_ += bytes;
 }
 
-std::unique_ptr<RingBufferAudioSource> RingBufferAudioSource::create(
-    std::shared_ptr<ring_buffer::RingBuffer> ring_buffer, size_t max_fill_bytes, uint8_t alignment_bytes) {
-  if (ring_buffer == nullptr || max_fill_bytes == 0 || alignment_bytes == 0 || alignment_bytes > MAX_ALIGNMENT_BYTES) {
-    return nullptr;
-  }
-  return std::unique_ptr<RingBufferAudioSource>(
-      new RingBufferAudioSource(std::move(ring_buffer), max_fill_bytes, alignment_bytes));
-}
-
-RingBufferAudioSource::~RingBufferAudioSource() {
-  if (this->acquired_item_ != nullptr) {
-    this->ring_buffer_->receive_release(this->acquired_item_);
-    this->acquired_item_ = nullptr;
-  }
-}
-
-void RingBufferAudioSource::release_item_() {
-  if (this->acquired_item_ == nullptr) {
-    return;
-  }
-  if (this->item_trailing_length_ > 0) {
-    // Copy the trailing sub-frame bytes into the splice buffer before returning the item; the next
-    // fill() will complete the frame from the head of the next chunk.
-    std::memcpy(this->splice_buffer_, this->item_trailing_ptr_, this->item_trailing_length_);
-    this->splice_length_ = this->item_trailing_length_;
-    this->item_trailing_ptr_ = nullptr;
-    this->item_trailing_length_ = 0;
-  }
-  this->ring_buffer_->receive_release(this->acquired_item_);
-  this->acquired_item_ = nullptr;
-}
-
-void RingBufferAudioSource::consume(size_t bytes) {
-  bytes = std::min(bytes, this->current_available_);
-  this->current_data_ += bytes;
-  this->current_available_ -= bytes;
-  // Promotion of queued data is deferred to fill() so callers see new data as a fresh return value
-  // rather than appearing silently after consume(). When the held item has nothing left depending
-  // on it (no exposed bytes and no queued region), release it now so the ring buffer can be
-  // reclaimed by writers even if fill() is never called again.
-  if (this->current_available_ == 0 && this->queued_length_ == 0) {
-    this->release_item_();
-  }
-}
-
-void RingBufferAudioSource::clear_buffered_data() {
-  // Release the held item before reset() so the source no longer references memory the reset will reclaim.
-  if (this->acquired_item_ != nullptr) {
-    this->ring_buffer_->receive_release(this->acquired_item_);
-    this->acquired_item_ = nullptr;
-  }
-  this->current_data_ = nullptr;
-  this->current_available_ = 0;
-  this->queued_data_ = nullptr;
-  this->queued_length_ = 0;
-  this->item_trailing_ptr_ = nullptr;
-  this->item_trailing_length_ = 0;
-  this->splice_length_ = 0;
-  this->ring_buffer_->reset();
-}
-
-bool RingBufferAudioSource::has_buffered_data() const {
-  // splice_length_ is deliberately not considered here. It holds an incomplete frame whose completion
-  // bytes must still arrive through the ring buffer, which ring_buffer_->available() already reports.
-  // Counting it separately would strand a drain loop when a stream ends mid-frame and those completion
-  // bytes never come.
-  return (this->current_available_ > 0) || (this->queued_length_ > 0) || (this->ring_buffer_->available() > 0);
-}
-
-size_t RingBufferAudioSource::fill(TickType_t ticks_to_wait, bool /*pre_shift*/) {
-  if (this->current_available_ > 0) {
-    // Caller has not finished consuming the current exposure
-    return 0;
-  }
-
-  // If a queued region (the aligned remainder of the new chunk after a splice frame) is waiting,
-  // promote it to the exposed region and report its size as fresh data.
-  if (this->queued_length_ > 0) {
-    this->current_data_ = this->queued_data_;
-    this->current_available_ = this->queued_length_;
-    this->queued_data_ = nullptr;
-    this->queued_length_ = 0;
-    return this->current_available_;
-  }
-
-  // Nothing exposed and nothing queued: release the previously held item (saving any sub-frame tail
-  // to splice_buffer_) and acquire a new chunk.
-  this->release_item_();
-
-  size_t chunk_length = 0;
-  void *item = this->ring_buffer_->receive_acquire(chunk_length, this->max_fill_bytes_, ticks_to_wait);
-  if (item == nullptr) {
-    return 0;
-  }
-
-  uint8_t *chunk_data = static_cast<uint8_t *>(item);
-  bool exposing_splice_frame = false;
-
-  // Complete any pending splice frame from the head of the new chunk.
-  if (this->splice_length_ > 0) {
-    const size_t needed = static_cast<size_t>(this->alignment_bytes_) - this->splice_length_;
-    if (chunk_length < needed) {
-      // Not enough data to complete the spliced frame yet; absorb everything and wait for more.
-      std::memcpy(this->splice_buffer_ + this->splice_length_, chunk_data, chunk_length);
-      this->splice_length_ += chunk_length;
-      this->ring_buffer_->receive_release(item);
-      return 0;
-    }
-    std::memcpy(this->splice_buffer_ + this->splice_length_, chunk_data, needed);
-    chunk_data += needed;
-    chunk_length -= needed;
-    this->splice_length_ = 0;
-    exposing_splice_frame = true;
-  }
-
-  this->acquired_item_ = item;
-
-  // Split the remaining chunk into its aligned region and a (possibly zero) sub-frame trailing tail.
-  const size_t trailing = (this->alignment_bytes_ > 1) ? (chunk_length % this->alignment_bytes_) : 0;
-  const size_t aligned_bytes = chunk_length - trailing;
-  if (trailing > 0) {
-    this->item_trailing_ptr_ = chunk_data + aligned_bytes;
-    this->item_trailing_length_ = trailing;
-  }
-
-  if (exposing_splice_frame) {
-    // Expose the spliced frame from splice_buffer_, queuing the chunk's aligned region for the next
-    // fill() call.
-    this->current_data_ = this->splice_buffer_;
-    this->current_available_ = this->alignment_bytes_;
-    this->queued_data_ = chunk_data;
-    this->queued_length_ = aligned_bytes;
-    return this->alignment_bytes_;
-  }
-
-  if (aligned_bytes == 0) {
-    // The entire chunk is a sub-frame tail (only possible when alignment exceeds chunk size). Save it
-    // to the splice buffer and release the item so the next fill() can complete the frame.
-    this->release_item_();
-    return 0;
-  }
-
-  this->current_data_ = chunk_data;
-  this->current_available_ = aligned_bytes;
-  return aligned_bytes;
-}
-
 }  // namespace esphome::audio
 
 #endif

esphome/components/audio/audio_transfer_buffer.h

@@ -214,90 +214,6 @@ class ConstAudioSourceBuffer : public AudioReadableBuffer {
   size_t length_{0};
 };
 
-/// @brief Zero-copy audio source that reads directly from a ring buffer's internal storage.
-///
-/// Optionally enforces a minimum read alignment (e.g. one audio frame). When alignment_bytes > 1, the
-/// source transparently stitches frames that straddle the ring buffer's wrap boundary by buffering the
-/// trailing partial frame from one chunk and joining it with the head of the next chunk in a small
-/// internal splice buffer, so callers always see frame-aligned data.
-///
-/// Not thread-safe. The underlying ring_buffer::RingBuffer supports one producer and one consumer
-/// running concurrently, but a given RingBufferAudioSource (its acquired item, splice buffer, and
-/// queued region) must be used by only one thread, and that thread is the ring buffer's consumer.
-class RingBufferAudioSource : public AudioReadableBuffer {
- public:
-  /// Maximum supported alignment. Sized to cover 32-bit samples across up to 2 channels (8 bytes).
-  static constexpr size_t MAX_ALIGNMENT_BYTES = 8;
-
-  /// @brief Creates a new ring-buffer-backed audio source after validating its parameters.
-  /// @param ring_buffer The ring buffer to read from. Must be non-null.
-  /// @param max_fill_bytes Soft cap on bytes acquired per fill() call. Must be > 0.
-  /// @param alignment_bytes Minimum exposed-region alignment in bytes (defaults to 1, i.e. byte-aligned).
-  ///        Pass bytes_per_frame to make every exposed region a whole number of frames. Must be in
-  ///        [1, MAX_ALIGNMENT_BYTES].
-  /// @return unique_ptr if parameters are valid, nullptr otherwise
-  static std::unique_ptr<RingBufferAudioSource> create(std::shared_ptr<ring_buffer::RingBuffer> ring_buffer,
-                                                       size_t max_fill_bytes, uint8_t alignment_bytes = 1);
-
-  ~RingBufferAudioSource() override;
-
-  // AudioReadableBuffer interface
-  const uint8_t *data() const override { return this->current_data_; }
-  size_t available() const override { return this->current_available_; }
-  void consume(size_t bytes) override;
-  bool has_buffered_data() const override;
-  /// pre_shift is ignored: there is no intermediate transfer buffer to compact, so an unconsumed
-  /// exposure stays in place and fill() returns 0 until it is fully consumed.
-  size_t fill(TickType_t ticks_to_wait, bool pre_shift) override;
-
-  /// @brief Discards all buffered audio: releases any held ring buffer item, clears the source's in-flight
-  /// state, and resets the underlying ring buffer. Must be invoked from the ring buffer's consumer thread.
-  void clear_buffered_data();
-
-  /// @brief Returns a mutable pointer to the currently exposed audio data.
-  /// The pointer may reference the ring buffer's internal storage or, when exposing a stitched frame
-  /// across a wrap boundary, an internal splice buffer. In either case mutations are safe but data
-  /// should be discarded after use, since the underlying storage will be reused on the next fill().
-  /// Use only when the caller is the sole consumer of this source.
-  uint8_t *mutable_data() { return this->current_data_; }
-
- protected:
-  /// @brief Constructs a new ring-buffer-backed audio source. Use create() instead, which validates
-  /// arguments before construction.
-  explicit RingBufferAudioSource(std::shared_ptr<ring_buffer::RingBuffer> ring_buffer, size_t max_fill_bytes,
-                                 uint8_t alignment_bytes)
-      : ring_buffer_(std::move(ring_buffer)), max_fill_bytes_(max_fill_bytes), alignment_bytes_(alignment_bytes) {}
-
-  /// @brief Releases the currently held ring buffer item, first copying any trailing sub-frame bytes
-  /// into the splice buffer so they can be stitched with the next chunk.
-  void release_item_();
-
-  std::shared_ptr<ring_buffer::RingBuffer> ring_buffer_;
-  size_t max_fill_bytes_;
-
-  void *acquired_item_{nullptr};
-  uint8_t *current_data_{nullptr};
-
-  // Sub-frame trailing bytes inside the held item that will be copied to splice_buffer_ on release.
-  uint8_t *item_trailing_ptr_{nullptr};
-
-  // After the currently-exposed splice frame is consumed, fill() will promote this region (the aligned
-  // remainder of the new chunk) to the exposed region. queued_length_ == 0 when nothing is queued.
-  uint8_t *queued_data_{nullptr};
-
-  // Splice buffer holds the start of a partial frame whose remainder lives at the head of the next
-  // chunk. While splice_length_ > 0, the buffer is incomplete and waiting for completion bytes.
-  uint8_t splice_buffer_[MAX_ALIGNMENT_BYTES];
-
-  size_t current_available_{0};
-  size_t queued_length_{0};
-
-  // item_trailing_length_ and splice_length_ are bounded by MAX_ALIGNMENT_BYTES.
-  uint8_t alignment_bytes_;
-  uint8_t item_trailing_length_{0};
-  uint8_t splice_length_{0};
-};
-
 }  // namespace esphome::audio
 
 #endif

esphome/components/audio_file/__init__.py

@@ -72,7 +72,7 @@ def _file_schema(value: ConfigType | str) -> ConfigType:
 
 def _validate_file_shorthand(value: str) -> ConfigType:
     value = cv.string_strict(value)
-    if value.startswith(("http://", "https://")):
+    if value.startswith("http://") or value.startswith("https://"):
         return _file_schema(
             {
                 CONF_TYPE: TYPE_WEB,
@@ -98,7 +98,7 @@ def read_audio_file_and_type(file_config: ConfigType) -> tuple[bytes, MockObj]:
     else:
         raise cv.Invalid("Unsupported file source")
 
-    with path.open("rb") as f:
+    with open(path, "rb") as f:
         data = f.read()
 
     try:

esphome/components/audio_file/media_source/__init__.py

@@ -1,5 +1,7 @@
+from typing import Any
+
 import esphome.codegen as cg
-from esphome.components import audio, media_source, psram
+from esphome.components import audio, esp32, media_source, psram
 import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_TASK_STACK_IN_PSRAM
 from esphome.types import ConfigType
@@ -19,13 +21,19 @@ def _request_micro_decoder(config: ConfigType) -> ConfigType:
     return config
 
 
+def _validate_task_stack_in_psram(value: Any) -> bool:
+    if value := cv.boolean(value):
+        return cv.requires_component(psram.DOMAIN)(value)
+    return value
+
+
 CONFIG_SCHEMA = cv.All(
     media_source.media_source_schema(
         AudioFileMediaSource,
     )
     .extend(
         {
-            cv.Optional(CONF_TASK_STACK_IN_PSRAM): psram.validate_task_stack_in_psram,
+            cv.Optional(CONF_TASK_STACK_IN_PSRAM): _validate_task_stack_in_psram,
         }
     )
     .extend(cv.COMPONENT_SCHEMA),
@@ -41,4 +49,6 @@ async def to_code(config: ConfigType) -> None:
 
     if config.get(CONF_TASK_STACK_IN_PSRAM):
         cg.add(var.set_task_stack_in_psram(True))
-        psram.request_external_task_stack()
+        esp32.add_idf_sdkconfig_option(
+            "CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY", True
+        )

esphome/components/audio_http/media_source.py

@@ -1,5 +1,7 @@
+from typing import Any
+
 import esphome.codegen as cg
-from esphome.components import audio, media_source, psram
+from esphome.components import audio, esp32, media_source, psram
 import esphome.config_validation as cv
 from esphome.const import CONF_BUFFER_SIZE, CONF_ID, CONF_TASK_STACK_IN_PSRAM
 from esphome.types import ConfigType
@@ -18,6 +20,14 @@ def _request_micro_decoder(config: ConfigType) -> ConfigType:
     return config
 
 
+def _validate_task_stack_in_psram(value: Any) -> bool:
+    # Only require the psram component when actually enabling PSRAM stacks; validating
+    # the boolean first means `false` doesn't trigger the requires_component check.
+    if value := cv.boolean(value):
+        return cv.requires_component(psram.DOMAIN)(value)
+    return value
+
+
 CONFIG_SCHEMA = cv.All(
     media_source.media_source_schema(
         AudioHTTPMediaSource,
@@ -27,7 +37,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_BUFFER_SIZE, default=50000): cv.int_range(
                 min=5000, max=1000000
             ),
-            cv.Optional(CONF_TASK_STACK_IN_PSRAM): psram.validate_task_stack_in_psram,
+            cv.Optional(CONF_TASK_STACK_IN_PSRAM): _validate_task_stack_in_psram,
         }
     )
     .extend(cv.COMPONENT_SCHEMA),
@@ -43,5 +53,7 @@ async def to_code(config: ConfigType) -> None:
 
     if config.get(CONF_TASK_STACK_IN_PSRAM):
         cg.add(var.set_task_stack_in_psram(True))
-        psram.request_external_task_stack()
+        esp32.add_idf_sdkconfig_option(
+            "CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY", True
+        )
     cg.add(var.set_buffer_size(config[CONF_BUFFER_SIZE]))

esphome/components/bluetooth_proxy/bluetooth_connection.cpp

@@ -135,26 +135,12 @@ void BluetoothConnection::loop() {
   // - For V3_WITH_CACHE: Services are never sent, disable after INIT state
   // - For V3_WITHOUT_CACHE: Disable only after service discovery is complete
   //   (send_service_ == DONE_SENDING_SERVICES, which is only set after services are sent)
-  // Never disable while DISCONNECTING — BLEClientBase::loop() needs to keep running so the
-  // 10s safety timeout can force IDLE if CLOSE_EVT is never delivered.
-  if (this->state() != espbt::ClientState::INIT && this->state() != espbt::ClientState::DISCONNECTING &&
-      (this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE ||
-       this->send_service_ == DONE_SENDING_SERVICES)) {
+  if (this->state() != espbt::ClientState::INIT && (this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE ||
+                                                    this->send_service_ == DONE_SENDING_SERVICES)) {
     this->disable_loop();
   }
 }
 
-void BluetoothConnection::on_disconnect_complete(esp_err_t reason) {
-  // Called from both the CLOSE_EVT handler and the DISCONNECTING safety timeout in the
-  // base class. Free the proxy slot, notify the API client, and reset send_service_.
-  // address_ may already be 0 if reset_connection_ ran earlier on this teardown.
-  if (this->address_ == 0) {
-    return;
-  }
-  ESP_LOGD(TAG, "[%d] [%s] Close, reason=0x%02x, freeing slot", this->connection_index_, this->address_str_, reason);
-  this->reset_connection_(reason);
-}
-
 void BluetoothConnection::reset_connection_(esp_err_t reason) {
   // Send disconnection notification
   this->proxy_->send_device_connection(this->address_, false, 0, reason);
@@ -386,6 +372,14 @@ bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_ga
       this->proxy_->send_device_connection(this->address_, false, 0, param->disconnect.reason);
       break;
     }
+    case ESP_GATTC_CLOSE_EVT: {
+      ESP_LOGD(TAG, "[%d] [%s] Close, reason=0x%02x, freeing slot", this->connection_index_, this->address_str_,
+               param->close.reason);
+      // Now the GATT connection is fully closed and controller resources are freed
+      // Safe to mark the connection slot as available
+      this->reset_connection_(param->close.reason);
+      break;
+    }
     case ESP_GATTC_OPEN_EVT: {
       if (param->open.status != ESP_GATT_OK && param->open.status != ESP_GATT_ALREADY_OPEN) {
         this->reset_connection_(param->open.status);

esphome/components/bluetooth_proxy/bluetooth_connection.h

@@ -33,8 +33,6 @@ class BluetoothConnection final : public esp32_ble_client::BLEClientBase {
  protected:
   friend class BluetoothProxy;
 
-  void on_disconnect_complete(esp_err_t reason) override;
-
   bool supports_efficient_uuids_() const;
   void send_service_for_discovery_();
   void reset_connection_(esp_err_t reason);

esphome/components/bluetooth_proxy/bluetooth_proxy.cpp

@@ -1,6 +1,5 @@
 #include "bluetooth_proxy.h"
 
-#include "esphome/components/api/api_server.h"
 #include "esphome/core/log.h"
 #include "esphome/core/macros.h"
 #include "esphome/core/application.h"

esphome/components/bme680_bsec/bme680_bsec.cpp

@@ -161,7 +161,7 @@ void BME680BSECComponent::dump_config() {
                 "  IAQ Mode: %s\n"
                 "  Supply Voltage: %sV\n"
                 "  Sample Rate: %s\n"
-                "  State Save Interval: %" PRIu32 "ms",
+                "  State Save Interval: %ims",
                 this->temperature_offset_, this->iaq_mode_ == IAQ_MODE_STATIC ? "Static" : "Mobile",
                 this->supply_voltage_ == SUPPLY_VOLTAGE_3V3 ? "3.3" : "1.8",
                 BME680_BSEC_SAMPLE_RATE_LOG(this->sample_rate_), this->state_save_interval_ms_);
@@ -461,7 +461,7 @@ int8_t BME680BSECComponent::write_bytes_wrapper(uint8_t devid, uint8_t a_registe
 }
 
 void BME680BSECComponent::delay_ms(uint32_t period) {
-  ESP_LOGV(TAG, "Delaying for %" PRIu32 "ms", period);
+  ESP_LOGV(TAG, "Delaying for %ums", period);
   delay(period);
 }
 

esphome/components/bme68x_bsec2/__init__.py

@@ -169,7 +169,7 @@ async def to_code_base(config):
     path = _compute_local_file_path(_compute_url(config))
 
     try:
-        with path.open(encoding="utf-8") as f:
+        with open(path, encoding="utf-8") as f:
             bsec2_iaq_config = f.read()
     except Exception as e:
         raise core.EsphomeError(

esphome/components/bmi270/__init__.py

@@ -1,10 +0,0 @@
-import esphome.codegen as cg
-from esphome.components import i2c
-from esphome.components.motion import MotionComponent
-
-CODEOWNERS = ["@clydebarrow"]
-
-CONF_BMI270_ID = "bmi270_id"
-#  C++ namespace / class
-bmi270_ns = cg.esphome_ns.namespace("bmi270")
-BMI270Component = bmi270_ns.class_("BMI270Component", MotionComponent, i2c.I2CDevice)

esphome/components/bmi270/bmi270.cpp

@@ -1,209 +0,0 @@
-#include "bmi270.h"
-#include "bmi270_config.h"
-#include "esphome/core/log.h"
-#include "esphome/core/hal.h"
-
-namespace esphome::bmi270 {
-
-static const char *const TAG = "bmi270";
-
-#if defined(USE_ARDUINO) && !defined(USE_ESP32)
-static const size_t MAX_I2C_BUFFER_SIZE = 32;
-#else
-static const size_t MAX_I2C_BUFFER_SIZE = 256;
-#endif
-
-//  Configuration blob upload
-// The BMI270 requires a firmware config blob to be written to its internal
-// memory after every power-on before sensors can be used.
-
-bool BMI270Component::load_config_file_() {
-  // 1. Disable advanced power-save so the config port is accessible
-  if (!this->write_byte(BMI270_REG_PWR_CONF, 0x00))
-    return false;
-  delay(1);
-
-  // 2. Prepare config load: write 0x00 to INIT_CTRL to start
-  if (!this->write_byte(BMI270_REG_INIT_CTRL, 0x00))
-    return false;
-
-  // 3. Burst-write the config in pages
-  const uint8_t *cfg = BMI270_CONFIG_FILE;
-  constexpr size_t cfg_len = sizeof(BMI270_CONFIG_FILE);
-  size_t index = 0;
-
-  while (index != cfg_len) {
-    // Set the page address in INIT_ADDR registers
-    uint8_t addr_lsb = (uint8_t) ((index / 2) & 0x0F);
-    uint8_t addr_msb = (uint8_t) ((index / 2) >> 4);
-    if (!this->write_byte(BMI270_REG_INIT_ADDR_0, addr_lsb))
-      return false;
-    if (!this->write_byte(BMI270_REG_INIT_ADDR_0 + 1, addr_msb))
-      return false;
-
-    // Write a burst of up to the maximum allowed size
-    size_t burst = clamp_at_most(cfg_len - index, MAX_I2C_BUFFER_SIZE);
-    if (this->write_register(BMI270_REG_INIT_DATA, cfg + index, burst) != i2c::ERROR_OK)
-      return false;
-
-    index += burst;
-  }
-
-  // 4. Signal end of config load
-  if (!this->write_byte(BMI270_REG_INIT_CTRL, 0x01))
-    return false;
-  delay(20);  // spec: wait ≥20 ms for init to complete
-
-  // 5. Check INTERNAL_STATUS: bit[0:3] should be 0x01 ("initialisation OK")
-  uint8_t status = 0;
-  if (!this->read_byte(BMI270_REG_INTERNAL_STATUS, &status))
-    return false;
-  if ((status & 0x0F) != 0x01) {
-    ESP_LOGE(TAG, "Config load failed: INTERNAL_STATUS=0x%02X (expected 0x01)", status);
-    return false;
-  }
-  return true;
-}
-
-//  setup() ─
-
-void BMI270Component::setup() {
-  MotionComponent::setup();
-  // 1. Verify chip ID
-  uint8_t chip_id = 0;
-  if (!this->read_byte(BMI270_REG_CHIP_ID, &chip_id)) {
-    ESP_LOGE(TAG, "Failed to read chip ID – check wiring / address");
-    this->mark_failed();
-    return;
-  }
-  if (chip_id != BMI270_CHIP_ID_VALUE) {
-    ESP_LOGE(TAG, "Wrong chip ID: 0x%02X (expected 0x%02X)", chip_id, BMI270_CHIP_ID_VALUE);
-    this->mark_failed();
-    return;
-  }
-  ESP_LOGD(TAG, "Chip ID: 0x%02X", chip_id);
-
-  // 2. Soft-reset via CMD register (0x7E = 0xB6)
-  if (!this->write_byte(0x7E, 0xB6)) {
-    this->mark_failed();
-    return;
-  }
-  delay(20);
-
-  // 4. Upload the configuration blob
-  if (!load_config_file_()) {
-    ESP_LOGE(TAG, "Config file upload failed");
-    this->mark_failed();
-    return;
-  }
-  ESP_LOGD(TAG, "Config blob uploaded ✓");
-
-  // 5. Configure accelerometer
-  // ACC_CONF: ODR | BWP(0x2 = normal avg4) | perf_mode(1)
-  uint8_t acc_conf = (uint8_t) (accel_odr_) | (0x2 << 4) | (1 << 7);
-  if (!this->write_byte(BMI270_REG_ACC_CONF, acc_conf)) {
-    this->mark_failed();
-    return;
-  }
-  if (!this->write_byte(BMI270_REG_ACC_RANGE, (uint8_t) accel_range_)) {
-    this->mark_failed();
-    return;
-  }
-
-  // 6. Configure gyroscope
-  // GYR_CONF: ODR | BWP(0x2 = normal) | noise_perf(1) | filter_perf(1)
-  uint8_t gyr_conf = (uint8_t) (gyro_odr_) | (0x2 << 4) | (1 << 6) | (1 << 7);
-  if (!this->write_byte(BMI270_REG_GYR_CONF, gyr_conf)) {
-    this->mark_failed();
-    return;
-  }
-  if (!this->write_byte(BMI270_REG_GYR_RANGE, (uint8_t) gyro_range_)) {
-    this->mark_failed();
-    return;
-  }
-
-  // 7. Enable accelerometer, gyroscope, and temperature sensor
-  //    PWR_CTRL bits: temp_en[3] | gyr_en[2] | acc_en[1]
-  if (!this->write_byte(BMI270_REG_PWR_CTRL, 0x0E)) {
-    this->mark_failed();
-    return;
-  }
-  delay(5);
-
-  // 8. Re-enable advanced power save (optional; keeps current low between reads)
-  // Disabled here for simplicity – leave in performance mode
-  if (!this->write_byte(BMI270_REG_PWR_CONF, 0x02)) {  // bit1 = fifo_self_wakeup
-    this->mark_failed();
-    return;
-  }
-
-  ESP_LOGCONFIG(TAG, "BMI270 initialised successfully");
-}
-
-void BMI270Component::dump_config() {
-  ESP_LOGCONFIG(TAG, "BMI270 IMU:");
-  LOG_I2C_DEVICE(this);
-  if (this->is_failed()) {
-    ESP_LOGE(TAG, "  Communication failed!");
-    return;
-  }
-
-  static constexpr const char *const ACCEL_RANGE_STRS[] = {"±2g", "±4g", "±8g", "±16g"};
-  static constexpr const char *const GYRO_RANGE_STRS[] = {"±2000°/s", "±1000°/s", "±500°/s", "±250°/s", "±125°/s"};
-
-  ESP_LOGCONFIG(TAG, "  Accel range : %s", ACCEL_RANGE_STRS[accel_range_]);
-  ESP_LOGCONFIG(TAG, "  Gyro  range : %s", GYRO_RANGE_STRS[gyro_range_]);
-  MotionComponent::dump_config();
-}
-
-//  update() ─
-// Reads all 6 axes + temperature in one block
-
-bool BMI270Component::update_data(motion::MotionData &data) {
-  if (this->is_failed())
-    return false;
-
-  //  Accelerometer: registers 0x0C–0x11 (6 bytes: x_lsb, x_msb, y_lsb, y_msb, z_lsb, z_msb)
-  uint8_t raw_data[REG_READ_LEN];
-  if (!this->read_bytes(BMI270_REG_DATA_8, raw_data, REG_READ_LEN)) {
-    ESP_LOGW(TAG, "Failed to read IMU data");
-    return false;
-  }
-  // Scale factor: LSB/g depends on range
-  // raw is a signed 16-bit value; full-scale = range_g * 2^15 lsb
-  static constexpr float ACCEL_SCALE[] = {
-      2.0f / 32768.0f,
-      4.0f / 32768.0f,
-      8.0f / 32768.0f,
-      16.0f / 32768.0f,
-  };
-  float scale = ACCEL_SCALE[this->accel_range_];
-
-  data.acceleration[motion::X_AXIS] = (int16_t) ((raw_data[1] << 8) | raw_data[0]) * scale;
-  data.acceleration[motion::Y_AXIS] = (int16_t) ((raw_data[3] << 8) | raw_data[2]) * scale;
-  data.acceleration[motion::Z_AXIS] = (int16_t) ((raw_data[5] << 8) | raw_data[4]) * scale;
-
-  // Gyroscope: registers 0x12–0x17 (6 bytes)
-  // Scale: full-scale range / 2^15
-  static constexpr float GYRO_SCALE[] = {
-      2000.0f / 32768.0f, 1000.0f / 32768.0f, 500.0f / 32768.0f, 250.0f / 32768.0f, 125.0f / 32768.0f,
-  };
-  static constexpr uint8_t GYR_OFFS = BMI270_REG_DATA_14 - BMI270_REG_DATA_8;
-  scale = GYRO_SCALE[this->gyro_range_];
-
-  data.angular_rate[motion::X_AXIS] = (int16_t) ((raw_data[GYR_OFFS + 1] << 8) | raw_data[GYR_OFFS + 0]) * scale;
-  data.angular_rate[motion::Y_AXIS] = (int16_t) ((raw_data[GYR_OFFS + 3] << 8) | raw_data[GYR_OFFS + 2]) * scale;
-  data.angular_rate[motion::Z_AXIS] = (int16_t) ((raw_data[GYR_OFFS + 5] << 8) | raw_data[GYR_OFFS + 4]) * scale;
-
-  if (this->temperature_callback_.empty())
-    return true;
-  //  Temperature: registers 0x22–0x23
-  // Formula from datasheet: T[°C] = raw / 512 + 23
-  static constexpr uint8_t TEMP_OFFS = BMI270_REG_TEMP_0 - BMI270_REG_DATA_8;
-  int16_t raw_t = (int16_t) ((raw_data[TEMP_OFFS + 1] << 8) | raw_data[TEMP_OFFS + 0]);
-  float temperature = (raw_t / 512.0f) + 23.0f;
-  this->temperature_callback_.call(temperature);
-  return true;
-}
-
-}  // namespace esphome::bmi270

esphome/components/bmi270/bmi270.h

@@ -1,108 +0,0 @@
-#pragma once
-
-#include "esphome/components/motion/motion_component.h"
-#include "esphome/core/component.h"
-#include "esphome/core/helpers.h"
-#include "esphome/components/i2c/i2c.h"
-#include <functional>
-
-namespace esphome::bmi270 {
-
-//  Register map
-static const uint8_t BMI270_REG_CHIP_ID = 0x00;
-static const uint8_t BMI270_REG_ERR_REG = 0x02;
-static const uint8_t BMI270_REG_STATUS = 0x03;
-static const uint8_t BMI270_REG_DATA_8 = 0x0C;   // ACC_X LSB
-static const uint8_t BMI270_REG_DATA_14 = 0x12;  // GYR_X LSB
-static const uint8_t BMI270_REG_TEMP_0 = 0x22;
-static const uint8_t BMI270_REG_TEMP_MSB = 0x23;  // temperature (2 bytes big-endian ish)
-
-static constexpr uint8_t REG_READ_LEN =
-    BMI270_REG_TEMP_MSB - BMI270_REG_DATA_8 +
-    1;  // 0x23 - 0x0C + 1 = 0x18 bytes total for accel(6) + gyro(6) + temp(2) + padding(4)
-
-static const uint8_t BMI270_REG_PWR_CONF = 0x7C;
-static const uint8_t BMI270_REG_PWR_CTRL = 0x7D;
-static const uint8_t BMI270_REG_INIT_CTRL = 0x59;
-static const uint8_t BMI270_REG_INIT_DATA = 0x5E;
-static const uint8_t BMI270_REG_INIT_ADDR_0 = 0x5B;
-static const uint8_t BMI270_REG_INTERNAL_STATUS = 0x21;
-static const uint8_t BMI270_REG_ACC_CONF = 0x40;
-static const uint8_t BMI270_REG_ACC_RANGE = 0x41;
-static const uint8_t BMI270_REG_GYR_CONF = 0x42;
-static const uint8_t BMI270_REG_GYR_RANGE = 0x43;
-
-static const uint8_t BMI270_CHIP_ID_VALUE = 0x24;
-
-//  Accelerometer range options
-enum BMI270AccelRange : uint8_t {
-  BMI270_ACCEL_RANGE_2G = 0x00,
-  BMI270_ACCEL_RANGE_4G = 0x01,
-  BMI270_ACCEL_RANGE_8G = 0x02,
-  BMI270_ACCEL_RANGE_16G = 0x03,
-};
-
-//  Accelerometer ODR options
-enum BMI270AccelODR : uint8_t {
-  BMI270_ACCEL_ODR_12_5 = 0x05,
-  BMI270_ACCEL_ODR_25 = 0x06,
-  BMI270_ACCEL_ODR_50 = 0x07,
-  BMI270_ACCEL_ODR_100 = 0x08,
-  BMI270_ACCEL_ODR_200 = 0x09,
-  BMI270_ACCEL_ODR_400 = 0x0A,
-  BMI270_ACCEL_ODR_800 = 0x0B,
-  BMI270_ACCEL_ODR_1600 = 0x0C,
-};
-
-// Gyroscope range options
-enum BMI270GyroRange : uint8_t {
-  BMI270_GYRO_RANGE_2000 = 0x00,
-  BMI270_GYRO_RANGE_1000 = 0x01,
-  BMI270_GYRO_RANGE_500 = 0x02,
-  BMI270_GYRO_RANGE_250 = 0x03,
-  BMI270_GYRO_RANGE_125 = 0x04,
-};
-
-// Gyroscope ODR options
-enum BMI270GyroODR : uint8_t {
-  BMI270_GYRO_ODR_25 = 0x06,
-  BMI270_GYRO_ODR_50 = 0x07,
-  BMI270_GYRO_ODR_100 = 0x08,
-  BMI270_GYRO_ODR_200 = 0x09,
-  BMI270_GYRO_ODR_400 = 0x0A,
-  BMI270_GYRO_ODR_800 = 0x0B,
-  BMI270_GYRO_ODR_1600 = 0x0C,
-  BMI270_GYRO_ODR_3200 = 0x0D,
-};
-
-// ---Data class
-
-// Main component class
-class BMI270Component : public motion::MotionComponent, public i2c::I2CDevice {
- public:
-  // Lifecycle
-  void setup() override;
-  void dump_config() override;
-  float get_setup_priority() const override { return setup_priority::DATA; }
-
-  // Configuration setters
-  void set_accel_range(BMI270AccelRange r) { this->accel_range_ = r; }
-  void set_accel_odr(BMI270AccelODR o) { this->accel_odr_ = o; }
-  void set_gyro_range(BMI270GyroRange r) { this->gyro_range_ = r; }
-  void set_gyro_odr(BMI270GyroODR o) { this->gyro_odr_ = o; }
-  template<typename F> void add_temperature_listener(F &&cb) { this->temperature_callback_.add(std::forward<F>(cb)); }
-
- protected:
-  bool update_data(motion::MotionData &data) override;
-  bool load_config_file_();
-
-  // Config
-  BMI270AccelRange accel_range_{BMI270_ACCEL_RANGE_4G};
-  BMI270AccelODR accel_odr_{BMI270_ACCEL_ODR_100};
-  BMI270GyroRange gyro_range_{BMI270_GYRO_RANGE_2000};
-  BMI270GyroODR gyro_odr_{BMI270_GYRO_ODR_200};
-
-  LazyCallbackManager<void(float)> temperature_callback_{};
-};
-
-}  // namespace esphome::bmi270

esphome/components/bmi270/bmi270_config.h

@@ -1,483 +0,0 @@
-#pragma once
-#include <cstdint>
-
-namespace esphome::bmi270 {
-
-/**
- BMI270 configuration file (chip ID 0x24, firmware v2.86.1)
- Source: Bosch Sensortec BMI270_SensorAPI (BSD-3-Clause)
-         https://github.com/boschsensortec/BMI270_SensorAPI
-
-Copyright (c) 2023 Bosch Sensortec GmbH. All rights reserved.
-
-BSD-3-Clause
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright
-    notice, this list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright
-    notice, this list of conditions and the following disclaimer in the
-    documentation and/or other materials provided with the distribution.
-
-3. Neither the name of the copyright holder nor the names of its
-    contributors may be used to endorse or promote products derived from
-    this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-
- This blob MUST be written to the chip's internal INIT_DATA register
- after every power cycle, before any sensor data can be read.
- --------------------------------------------------------------------------- */
-
-static constexpr uint8_t BMI270_CONFIG_FILE[] = {
-    0xc8, 0x2e, 0x00, 0x2e, 0x80, 0x2e, 0x3d, 0xb1, 0xc8, 0x2e, 0x00, 0x2e, 0x80, 0x2e, 0x91, 0x03, 0x80, 0x2e, 0xbc,
-    0xb0, 0x80, 0x2e, 0xa3, 0x03, 0xc8, 0x2e, 0x00, 0x2e, 0x80, 0x2e, 0x00, 0xb0, 0x50, 0x30, 0x21, 0x2e, 0x59, 0xf5,
-    0x10, 0x30, 0x21, 0x2e, 0x6a, 0xf5, 0x80, 0x2e, 0x3b, 0x03, 0x00, 0x00, 0x00, 0x00, 0x08, 0x19, 0x01, 0x00, 0x22,
-    0x00, 0x75, 0x00, 0x00, 0x10, 0x00, 0x10, 0xd1, 0x00, 0xb3, 0x43, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1,
-    0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00,
-    0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e,
-    0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80,
-    0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1,
-    0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00,
-    0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e,
-    0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80,
-    0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1,
-    0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0xe0, 0x5f, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x92, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x19, 0x00, 0x00, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05,
-    0xe0, 0xaa, 0x38, 0x05, 0xe0, 0x90, 0x30, 0xfa, 0x00, 0x96, 0x00, 0x4b, 0x09, 0x11, 0x00, 0x11, 0x00, 0x02, 0x00,
-    0x2d, 0x01, 0xd4, 0x7b, 0x3b, 0x01, 0xdb, 0x7a, 0x04, 0x00, 0x3f, 0x7b, 0xcd, 0x6c, 0xc3, 0x04, 0x85, 0x09, 0xc3,
-    0x04, 0xec, 0xe6, 0x0c, 0x46, 0x01, 0x00, 0x27, 0x00, 0x19, 0x00, 0x96, 0x00, 0xa0, 0x00, 0x01, 0x00, 0x0c, 0x00,
-    0xf0, 0x3c, 0x00, 0x01, 0x01, 0x00, 0x03, 0x00, 0x01, 0x00, 0x0e, 0x00, 0x00, 0x00, 0x32, 0x00, 0x05, 0x00, 0xee,
-    0x06, 0x04, 0x00, 0xc8, 0x00, 0x00, 0x00, 0x04, 0x00, 0xa8, 0x05, 0xee, 0x06, 0x00, 0x04, 0xbc, 0x02, 0xb3, 0x00,
-    0x85, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0xb4, 0x00, 0x01, 0x00, 0xb9, 0x00, 0x01, 0x00, 0x98, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x01, 0x00, 0x80, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x2e, 0x00, 0xc1, 0xfd, 0x2d, 0xde,
-    0x00, 0xeb, 0x00, 0xda, 0x00, 0x00, 0x0c, 0xff, 0x0f, 0x00, 0x04, 0xc0, 0x00, 0x5b, 0xf5, 0xc9, 0x01, 0x1e, 0xf2,
-    0x80, 0x00, 0x3f, 0xff, 0x19, 0xf4, 0x58, 0xf5, 0x66, 0xf5, 0x64, 0xf5, 0xc0, 0xf1, 0xf0, 0x00, 0xe0, 0x00, 0xcd,
-    0x01, 0xd3, 0x01, 0xdb, 0x01, 0xff, 0x7f, 0xff, 0x01, 0xe4, 0x00, 0x74, 0xf7, 0xf3, 0x00, 0xfa, 0x00, 0xff, 0x3f,
-    0xca, 0x03, 0x6c, 0x38, 0x56, 0xfe, 0x44, 0xfd, 0xbc, 0x02, 0xf9, 0x06, 0x00, 0xfc, 0x12, 0x02, 0xae, 0x01, 0x58,
-    0xfa, 0x9a, 0xfd, 0x77, 0x05, 0xbb, 0x02, 0x96, 0x01, 0x95, 0x01, 0x7f, 0x01, 0x82, 0x01, 0x89, 0x01, 0x87, 0x01,
-    0x88, 0x01, 0x8a, 0x01, 0x8c, 0x01, 0x8f, 0x01, 0x8d, 0x01, 0x92, 0x01, 0x91, 0x01, 0xdd, 0x00, 0x9f, 0x01, 0x7e,
-    0x01, 0xdb, 0x00, 0xb6, 0x01, 0x70, 0x69, 0x26, 0xd3, 0x9c, 0x07, 0x1f, 0x05, 0x9d, 0x00, 0x00, 0x08, 0xbc, 0x05,
-    0x37, 0xfa, 0xa2, 0x01, 0xaa, 0x01, 0xa1, 0x01, 0xa8, 0x01, 0xa0, 0x01, 0xa8, 0x05, 0xb4, 0x01, 0xb4, 0x01, 0xce,
-    0x00, 0xd0, 0x00, 0xfc, 0x00, 0xc5, 0x01, 0xff, 0xfb, 0xb1, 0x00, 0x00, 0x38, 0x00, 0x30, 0xfd, 0xf5, 0xfc, 0xf5,
-    0xcd, 0x01, 0xa0, 0x00, 0x5f, 0xff, 0x00, 0x40, 0xff, 0x00, 0x00, 0x80, 0x6d, 0x0f, 0xeb, 0x00, 0x7f, 0xff, 0xc2,
-    0xf5, 0x68, 0xf7, 0xb3, 0xf1, 0x67, 0x0f, 0x5b, 0x0f, 0x61, 0x0f, 0x80, 0x0f, 0x58, 0xf7, 0x5b, 0xf7, 0x83, 0x0f,
-    0x86, 0x00, 0x72, 0x0f, 0x85, 0x0f, 0xc6, 0xf1, 0x7f, 0x0f, 0x6c, 0xf7, 0x00, 0xe0, 0x00, 0xff, 0xd1, 0xf5, 0x87,
-    0x0f, 0x8a, 0x0f, 0xff, 0x03, 0xf0, 0x3f, 0x8b, 0x00, 0x8e, 0x00, 0x90, 0x00, 0xb9, 0x00, 0x2d, 0xf5, 0xca, 0xf5,
-    0xcb, 0x01, 0x20, 0xf2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x50, 0x98, 0x2e,
-    0xd7, 0x0e, 0x50, 0x32, 0x98, 0x2e, 0xfa, 0x03, 0x00, 0x30, 0xf0, 0x7f, 0x00, 0x2e, 0x00, 0x2e, 0xd0, 0x2e, 0x00,
-    0x2e, 0x01, 0x80, 0x08, 0xa2, 0xfb, 0x2f, 0x98, 0x2e, 0xba, 0x03, 0x21, 0x2e, 0x19, 0x00, 0x01, 0x2e, 0xee, 0x00,
-    0x00, 0xb2, 0x07, 0x2f, 0x01, 0x2e, 0x19, 0x00, 0x00, 0xb2, 0x03, 0x2f, 0x01, 0x50, 0x03, 0x52, 0x98, 0x2e, 0x07,
-    0xcc, 0x01, 0x2e, 0xdd, 0x00, 0x00, 0xb2, 0x27, 0x2f, 0x05, 0x2e, 0x8a, 0x00, 0x05, 0x52, 0x98, 0x2e, 0xc7, 0xc1,
-    0x03, 0x2e, 0xe9, 0x00, 0x40, 0xb2, 0xf0, 0x7f, 0x08, 0x2f, 0x01, 0x2e, 0x19, 0x00, 0x00, 0xb2, 0x04, 0x2f, 0x00,
-    0x30, 0x21, 0x2e, 0xe9, 0x00, 0x98, 0x2e, 0xb4, 0xb1, 0x01, 0x2e, 0x18, 0x00, 0x00, 0xb2, 0x10, 0x2f, 0x05, 0x50,
-    0x98, 0x2e, 0x4d, 0xc3, 0x05, 0x50, 0x98, 0x2e, 0x5a, 0xc7, 0x98, 0x2e, 0xf9, 0xb4, 0x98, 0x2e, 0x54, 0xb2, 0x98,
-    0x2e, 0x67, 0xb6, 0x98, 0x2e, 0x17, 0xb2, 0x10, 0x30, 0x21, 0x2e, 0x77, 0x00, 0x01, 0x2e, 0xef, 0x00, 0x00, 0xb2,
-    0x04, 0x2f, 0x98, 0x2e, 0x7a, 0xb7, 0x00, 0x30, 0x21, 0x2e, 0xef, 0x00, 0x01, 0x2e, 0xd4, 0x00, 0x04, 0xae, 0x0b,
-    0x2f, 0x01, 0x2e, 0xdd, 0x00, 0x00, 0xb2, 0x07, 0x2f, 0x05, 0x52, 0x98, 0x2e, 0x8e, 0x0e, 0x00, 0xb2, 0x02, 0x2f,
-    0x10, 0x30, 0x21, 0x2e, 0x7d, 0x00, 0x01, 0x2e, 0x7d, 0x00, 0x00, 0x90, 0x90, 0x2e, 0xf1, 0x02, 0x01, 0x2e, 0xd7,
-    0x00, 0x00, 0xb2, 0x04, 0x2f, 0x98, 0x2e, 0x2f, 0x0e, 0x00, 0x30, 0x21, 0x2e, 0x7b, 0x00, 0x01, 0x2e, 0x7b, 0x00,
-    0x00, 0xb2, 0x12, 0x2f, 0x01, 0x2e, 0xd4, 0x00, 0x00, 0x90, 0x02, 0x2f, 0x98, 0x2e, 0x1f, 0x0e, 0x09, 0x2d, 0x98,
-    0x2e, 0x81, 0x0d, 0x01, 0x2e, 0xd4, 0x00, 0x04, 0x90, 0x02, 0x2f, 0x50, 0x32, 0x98, 0x2e, 0xfa, 0x03, 0x00, 0x30,
-    0x21, 0x2e, 0x7b, 0x00, 0x01, 0x2e, 0x7c, 0x00, 0x00, 0xb2, 0x90, 0x2e, 0x09, 0x03, 0x01, 0x2e, 0x7c, 0x00, 0x01,
-    0x31, 0x01, 0x08, 0x00, 0xb2, 0x04, 0x2f, 0x98, 0x2e, 0x47, 0xcb, 0x10, 0x30, 0x21, 0x2e, 0x77, 0x00, 0x81, 0x30,
-    0x01, 0x2e, 0x7c, 0x00, 0x01, 0x08, 0x00, 0xb2, 0x61, 0x2f, 0x03, 0x2e, 0x89, 0x00, 0x01, 0x2e, 0xd4, 0x00, 0x98,
-    0xbc, 0x98, 0xb8, 0x05, 0xb2, 0x0f, 0x58, 0x23, 0x2f, 0x07, 0x90, 0x09, 0x54, 0x00, 0x30, 0x37, 0x2f, 0x15, 0x41,
-    0x04, 0x41, 0xdc, 0xbe, 0x44, 0xbe, 0xdc, 0xba, 0x2c, 0x01, 0x61, 0x00, 0x0f, 0x56, 0x4a, 0x0f, 0x0c, 0x2f, 0xd1,
-    0x42, 0x94, 0xb8, 0xc1, 0x42, 0x11, 0x30, 0x05, 0x2e, 0x6a, 0xf7, 0x2c, 0xbd, 0x2f, 0xb9, 0x80, 0xb2, 0x08, 0x22,
-    0x98, 0x2e, 0xc3, 0xb7, 0x21, 0x2d, 0x61, 0x30, 0x23, 0x2e, 0xd4, 0x00, 0x98, 0x2e, 0xc3, 0xb7, 0x00, 0x30, 0x21,
-    0x2e, 0x5a, 0xf5, 0x18, 0x2d, 0xe1, 0x7f, 0x50, 0x30, 0x98, 0x2e, 0xfa, 0x03, 0x0f, 0x52, 0x07, 0x50, 0x50, 0x42,
-    0x70, 0x30, 0x0d, 0x54, 0x42, 0x42, 0x7e, 0x82, 0xe2, 0x6f, 0x80, 0xb2, 0x42, 0x42, 0x05, 0x2f, 0x21, 0x2e, 0xd4,
-    0x00, 0x10, 0x30, 0x98, 0x2e, 0xc3, 0xb7, 0x03, 0x2d, 0x60, 0x30, 0x21, 0x2e, 0xd4, 0x00, 0x01, 0x2e, 0xd4, 0x00,
-    0x06, 0x90, 0x18, 0x2f, 0x01, 0x2e, 0x76, 0x00, 0x0b, 0x54, 0x07, 0x52, 0xe0, 0x7f, 0x98, 0x2e, 0x7a, 0xc1, 0xe1,
-    0x6f, 0x08, 0x1a, 0x40, 0x30, 0x08, 0x2f, 0x21, 0x2e, 0xd4, 0x00, 0x20, 0x30, 0x98, 0x2e, 0xaf, 0xb7, 0x50, 0x32,
-    0x98, 0x2e, 0xfa, 0x03, 0x05, 0x2d, 0x98, 0x2e, 0x38, 0x0e, 0x00, 0x30, 0x21, 0x2e, 0xd4, 0x00, 0x00, 0x30, 0x21,
-    0x2e, 0x7c, 0x00, 0x18, 0x2d, 0x01, 0x2e, 0xd4, 0x00, 0x03, 0xaa, 0x01, 0x2f, 0x98, 0x2e, 0x45, 0x0e, 0x01, 0x2e,
-    0xd4, 0x00, 0x3f, 0x80, 0x03, 0xa2, 0x01, 0x2f, 0x00, 0x2e, 0x02, 0x2d, 0x98, 0x2e, 0x5b, 0x0e, 0x30, 0x30, 0x98,
-    0x2e, 0xce, 0xb7, 0x00, 0x30, 0x21, 0x2e, 0x7d, 0x00, 0x50, 0x32, 0x98, 0x2e, 0xfa, 0x03, 0x01, 0x2e, 0x77, 0x00,
-    0x00, 0xb2, 0x24, 0x2f, 0x98, 0x2e, 0xf5, 0xcb, 0x03, 0x2e, 0xd5, 0x00, 0x11, 0x54, 0x01, 0x0a, 0xbc, 0x84, 0x83,
-    0x86, 0x21, 0x2e, 0xc9, 0x01, 0xe0, 0x40, 0x13, 0x52, 0xc4, 0x40, 0x82, 0x40, 0xa8, 0xb9, 0x52, 0x42, 0x43, 0xbe,
-    0x53, 0x42, 0x04, 0x0a, 0x50, 0x42, 0xe1, 0x7f, 0xf0, 0x31, 0x41, 0x40, 0xf2, 0x6f, 0x25, 0xbd, 0x08, 0x08, 0x02,
-    0x0a, 0xd0, 0x7f, 0x98, 0x2e, 0xa8, 0xcf, 0x06, 0xbc, 0xd1, 0x6f, 0xe2, 0x6f, 0x08, 0x0a, 0x80, 0x42, 0x98, 0x2e,
-    0x58, 0xb7, 0x00, 0x30, 0x21, 0x2e, 0xee, 0x00, 0x21, 0x2e, 0x77, 0x00, 0x21, 0x2e, 0xdd, 0x00, 0x80, 0x2e, 0xf4,
-    0x01, 0x1a, 0x24, 0x22, 0x00, 0x80, 0x2e, 0xec, 0x01, 0x10, 0x50, 0xfb, 0x7f, 0x98, 0x2e, 0xf3, 0x03, 0x57, 0x50,
-    0xfb, 0x6f, 0x01, 0x30, 0x71, 0x54, 0x11, 0x42, 0x42, 0x0e, 0xfc, 0x2f, 0xc0, 0x2e, 0x01, 0x42, 0xf0, 0x5f, 0x80,
-    0x2e, 0x00, 0xc1, 0xfd, 0x2d, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9a, 0x01,
-    0x34, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x20, 0x50, 0xe7, 0x7f, 0xf6, 0x7f, 0x06, 0x32, 0x0f, 0x2e, 0x61, 0xf5, 0xfe, 0x09, 0xc0, 0xb3, 0x04,
-    0x2f, 0x17, 0x30, 0x2f, 0x2e, 0xef, 0x00, 0x2d, 0x2e, 0x61, 0xf5, 0xf6, 0x6f, 0xe7, 0x6f, 0xe0, 0x5f, 0xc8, 0x2e,
-    0x20, 0x50, 0xe7, 0x7f, 0xf6, 0x7f, 0x46, 0x30, 0x0f, 0x2e, 0xa4, 0xf1, 0xbe, 0x09, 0x80, 0xb3, 0x06, 0x2f, 0x0d,
-    0x2e, 0xd4, 0x00, 0x84, 0xaf, 0x02, 0x2f, 0x16, 0x30, 0x2d, 0x2e, 0x7b, 0x00, 0x86, 0x30, 0x2d, 0x2e, 0x60, 0xf5,
-    0xf6, 0x6f, 0xe7, 0x6f, 0xe0, 0x5f, 0xc8, 0x2e, 0x01, 0x2e, 0x77, 0xf7, 0x09, 0xbc, 0x0f, 0xb8, 0x00, 0xb2, 0x10,
-    0x50, 0xfb, 0x7f, 0x10, 0x30, 0x0b, 0x2f, 0x03, 0x2e, 0x8a, 0x00, 0x96, 0xbc, 0x9f, 0xb8, 0x40, 0xb2, 0x05, 0x2f,
-    0x03, 0x2e, 0x68, 0xf7, 0x9e, 0xbc, 0x9f, 0xb8, 0x40, 0xb2, 0x07, 0x2f, 0x03, 0x2e, 0x7e, 0x00, 0x41, 0x90, 0x01,
-    0x2f, 0x98, 0x2e, 0xdc, 0x03, 0x03, 0x2c, 0x00, 0x30, 0x21, 0x2e, 0x7e, 0x00, 0xfb, 0x6f, 0xf0, 0x5f, 0xb8, 0x2e,
-    0x20, 0x50, 0xe0, 0x7f, 0xfb, 0x7f, 0x00, 0x2e, 0x27, 0x50, 0x98, 0x2e, 0x3b, 0xc8, 0x29, 0x50, 0x98, 0x2e, 0xa7,
-    0xc8, 0x01, 0x50, 0x98, 0x2e, 0x55, 0xcc, 0xe1, 0x6f, 0x2b, 0x50, 0x98, 0x2e, 0xe0, 0xc9, 0xfb, 0x6f, 0x00, 0x30,
-    0xe0, 0x5f, 0x21, 0x2e, 0x7e, 0x00, 0xb8, 0x2e, 0x73, 0x50, 0x01, 0x30, 0x57, 0x54, 0x11, 0x42, 0x42, 0x0e, 0xfc,
-    0x2f, 0xb8, 0x2e, 0x21, 0x2e, 0x59, 0xf5, 0x10, 0x30, 0xc0, 0x2e, 0x21, 0x2e, 0x4a, 0xf1, 0x90, 0x50, 0xf7, 0x7f,
-    0xe6, 0x7f, 0xd5, 0x7f, 0xc4, 0x7f, 0xb3, 0x7f, 0xa1, 0x7f, 0x90, 0x7f, 0x82, 0x7f, 0x7b, 0x7f, 0x98, 0x2e, 0x35,
-    0xb7, 0x00, 0xb2, 0x90, 0x2e, 0x97, 0xb0, 0x03, 0x2e, 0x8f, 0x00, 0x07, 0x2e, 0x91, 0x00, 0x05, 0x2e, 0xb1, 0x00,
-    0x3f, 0xba, 0x9f, 0xb8, 0x01, 0x2e, 0xb1, 0x00, 0xa3, 0xbd, 0x4c, 0x0a, 0x05, 0x2e, 0xb1, 0x00, 0x04, 0xbe, 0xbf,
-    0xb9, 0xcb, 0x0a, 0x4f, 0xba, 0x22, 0xbd, 0x01, 0x2e, 0xb3, 0x00, 0xdc, 0x0a, 0x2f, 0xb9, 0x03, 0x2e, 0xb8, 0x00,
-    0x0a, 0xbe, 0x9a, 0x0a, 0xcf, 0xb9, 0x9b, 0xbc, 0x01, 0x2e, 0x97, 0x00, 0x9f, 0xb8, 0x93, 0x0a, 0x0f, 0xbc, 0x91,
-    0x0a, 0x0f, 0xb8, 0x90, 0x0a, 0x25, 0x2e, 0x18, 0x00, 0x05, 0x2e, 0xc1, 0xf5, 0x2e, 0xbd, 0x2e, 0xb9, 0x01, 0x2e,
-    0x19, 0x00, 0x31, 0x30, 0x8a, 0x04, 0x00, 0x90, 0x07, 0x2f, 0x01, 0x2e, 0xd4, 0x00, 0x04, 0xa2, 0x03, 0x2f, 0x01,
-    0x2e, 0x18, 0x00, 0x00, 0xb2, 0x0c, 0x2f, 0x19, 0x50, 0x05, 0x52, 0x98, 0x2e, 0x4d, 0xb7, 0x05, 0x2e, 0x78, 0x00,
-    0x80, 0x90, 0x10, 0x30, 0x01, 0x2f, 0x21, 0x2e, 0x78, 0x00, 0x25, 0x2e, 0xdd, 0x00, 0x98, 0x2e, 0x3e, 0xb7, 0x00,
-    0xb2, 0x02, 0x30, 0x01, 0x30, 0x04, 0x2f, 0x01, 0x2e, 0x19, 0x00, 0x00, 0xb2, 0x00, 0x2f, 0x21, 0x30, 0x01, 0x2e,
-    0xea, 0x00, 0x08, 0x1a, 0x0e, 0x2f, 0x23, 0x2e, 0xea, 0x00, 0x33, 0x30, 0x1b, 0x50, 0x0b, 0x09, 0x01, 0x40, 0x17,
-    0x56, 0x46, 0xbe, 0x4b, 0x08, 0x4c, 0x0a, 0x01, 0x42, 0x0a, 0x80, 0x15, 0x52, 0x01, 0x42, 0x00, 0x2e, 0x01, 0x2e,
-    0x18, 0x00, 0x00, 0xb2, 0x1f, 0x2f, 0x03, 0x2e, 0xc0, 0xf5, 0xf0, 0x30, 0x48, 0x08, 0x47, 0xaa, 0x74, 0x30, 0x07,
-    0x2e, 0x7a, 0x00, 0x61, 0x22, 0x4b, 0x1a, 0x05, 0x2f, 0x07, 0x2e, 0x66, 0xf5, 0xbf, 0xbd, 0xbf, 0xb9, 0xc0, 0x90,
-    0x0b, 0x2f, 0x1d, 0x56, 0x2b, 0x30, 0xd2, 0x42, 0xdb, 0x42, 0x01, 0x04, 0xc2, 0x42, 0x04, 0xbd, 0xfe, 0x80, 0x81,
-    0x84, 0x23, 0x2e, 0x7a, 0x00, 0x02, 0x42, 0x02, 0x32, 0x25, 0x2e, 0x62, 0xf5, 0x05, 0x2e, 0xd6, 0x00, 0x81, 0x84,
-    0x25, 0x2e, 0xd6, 0x00, 0x02, 0x31, 0x25, 0x2e, 0x60, 0xf5, 0x05, 0x2e, 0x8a, 0x00, 0x0b, 0x50, 0x90, 0x08, 0x80,
-    0xb2, 0x0b, 0x2f, 0x05, 0x2e, 0xca, 0xf5, 0xf0, 0x3e, 0x90, 0x08, 0x25, 0x2e, 0xca, 0xf5, 0x05, 0x2e, 0x59, 0xf5,
-    0xe0, 0x3f, 0x90, 0x08, 0x25, 0x2e, 0x59, 0xf5, 0x90, 0x6f, 0xa1, 0x6f, 0xb3, 0x6f, 0xc4, 0x6f, 0xd5, 0x6f, 0xe6,
-    0x6f, 0xf7, 0x6f, 0x7b, 0x6f, 0x82, 0x6f, 0x70, 0x5f, 0xc8, 0x2e, 0xc0, 0x50, 0x90, 0x7f, 0xe5, 0x7f, 0xd4, 0x7f,
-    0xc3, 0x7f, 0xb1, 0x7f, 0xa2, 0x7f, 0x87, 0x7f, 0xf6, 0x7f, 0x7b, 0x7f, 0x00, 0x2e, 0x01, 0x2e, 0x60, 0xf5, 0x60,
-    0x7f, 0x98, 0x2e, 0x35, 0xb7, 0x02, 0x30, 0x63, 0x6f, 0x15, 0x52, 0x50, 0x7f, 0x62, 0x7f, 0x5a, 0x2c, 0x02, 0x32,
-    0x1a, 0x09, 0x00, 0xb3, 0x14, 0x2f, 0x00, 0xb2, 0x03, 0x2f, 0x09, 0x2e, 0x18, 0x00, 0x00, 0x91, 0x0c, 0x2f, 0x43,
-    0x7f, 0x98, 0x2e, 0x97, 0xb7, 0x1f, 0x50, 0x02, 0x8a, 0x02, 0x32, 0x04, 0x30, 0x25, 0x2e, 0x64, 0xf5, 0x15, 0x52,
-    0x50, 0x6f, 0x43, 0x6f, 0x44, 0x43, 0x25, 0x2e, 0x60, 0xf5, 0xd9, 0x08, 0xc0, 0xb2, 0x36, 0x2f, 0x98, 0x2e, 0x3e,
-    0xb7, 0x00, 0xb2, 0x06, 0x2f, 0x01, 0x2e, 0x19, 0x00, 0x00, 0xb2, 0x02, 0x2f, 0x50, 0x6f, 0x00, 0x90, 0x0a, 0x2f,
-    0x01, 0x2e, 0x79, 0x00, 0x00, 0x90, 0x19, 0x2f, 0x10, 0x30, 0x21, 0x2e, 0x79, 0x00, 0x00, 0x30, 0x98, 0x2e, 0xdc,
-    0x03, 0x13, 0x2d, 0x01, 0x2e, 0xc3, 0xf5, 0x0c, 0xbc, 0x0f, 0xb8, 0x12, 0x30, 0x10, 0x04, 0x03, 0xb0, 0x26, 0x25,
-    0x21, 0x50, 0x03, 0x52, 0x98, 0x2e, 0x4d, 0xb7, 0x10, 0x30, 0x21, 0x2e, 0xee, 0x00, 0x02, 0x30, 0x60, 0x7f, 0x25,
-    0x2e, 0x79, 0x00, 0x60, 0x6f, 0x00, 0x90, 0x05, 0x2f, 0x00, 0x30, 0x21, 0x2e, 0xea, 0x00, 0x15, 0x50, 0x21, 0x2e,
-    0x64, 0xf5, 0x15, 0x52, 0x23, 0x2e, 0x60, 0xf5, 0x02, 0x32, 0x50, 0x6f, 0x00, 0x90, 0x02, 0x2f, 0x03, 0x30, 0x27,
-    0x2e, 0x78, 0x00, 0x07, 0x2e, 0x60, 0xf5, 0x1a, 0x09, 0x00, 0x91, 0xa3, 0x2f, 0x19, 0x09, 0x00, 0x91, 0xa0, 0x2f,
-    0x90, 0x6f, 0xa2, 0x6f, 0xb1, 0x6f, 0xc3, 0x6f, 0xd4, 0x6f, 0xe5, 0x6f, 0x7b, 0x6f, 0xf6, 0x6f, 0x87, 0x6f, 0x40,
-    0x5f, 0xc8, 0x2e, 0xc0, 0x50, 0xe7, 0x7f, 0xf6, 0x7f, 0x26, 0x30, 0x0f, 0x2e, 0x61, 0xf5, 0x2f, 0x2e, 0x7c, 0x00,
-    0x0f, 0x2e, 0x7c, 0x00, 0xbe, 0x09, 0xa2, 0x7f, 0x80, 0x7f, 0x80, 0xb3, 0xd5, 0x7f, 0xc4, 0x7f, 0xb3, 0x7f, 0x91,
-    0x7f, 0x7b, 0x7f, 0x0b, 0x2f, 0x23, 0x50, 0x1a, 0x25, 0x12, 0x40, 0x42, 0x7f, 0x74, 0x82, 0x12, 0x40, 0x52, 0x7f,
-    0x00, 0x2e, 0x00, 0x40, 0x60, 0x7f, 0x98, 0x2e, 0x6a, 0xd6, 0x81, 0x30, 0x01, 0x2e, 0x7c, 0x00, 0x01, 0x08, 0x00,
-    0xb2, 0x42, 0x2f, 0x03, 0x2e, 0x89, 0x00, 0x01, 0x2e, 0x89, 0x00, 0x97, 0xbc, 0x06, 0xbc, 0x9f, 0xb8, 0x0f, 0xb8,
-    0x00, 0x90, 0x23, 0x2e, 0xd8, 0x00, 0x10, 0x30, 0x01, 0x30, 0x2a, 0x2f, 0x03, 0x2e, 0xd4, 0x00, 0x44, 0xb2, 0x05,
-    0x2f, 0x47, 0xb2, 0x00, 0x30, 0x2d, 0x2f, 0x21, 0x2e, 0x7c, 0x00, 0x2b, 0x2d, 0x03, 0x2e, 0xfd, 0xf5, 0x9e, 0xbc,
-    0x9f, 0xb8, 0x40, 0x90, 0x14, 0x2f, 0x03, 0x2e, 0xfc, 0xf5, 0x99, 0xbc, 0x9f, 0xb8, 0x40, 0x90, 0x0e, 0x2f, 0x03,
-    0x2e, 0x49, 0xf1, 0x25, 0x54, 0x4a, 0x08, 0x40, 0x90, 0x08, 0x2f, 0x98, 0x2e, 0x35, 0xb7, 0x00, 0xb2, 0x10, 0x30,
-    0x03, 0x2f, 0x50, 0x30, 0x21, 0x2e, 0xd4, 0x00, 0x10, 0x2d, 0x98, 0x2e, 0xaf, 0xb7, 0x00, 0x30, 0x21, 0x2e, 0x7c,
-    0x00, 0x0a, 0x2d, 0x05, 0x2e, 0x69, 0xf7, 0x2d, 0xbd, 0x2f, 0xb9, 0x80, 0xb2, 0x01, 0x2f, 0x21, 0x2e, 0x7d, 0x00,
-    0x23, 0x2e, 0x7c, 0x00, 0xe0, 0x31, 0x21, 0x2e, 0x61, 0xf5, 0xf6, 0x6f, 0xe7, 0x6f, 0x80, 0x6f, 0xa2, 0x6f, 0xb3,
-    0x6f, 0xc4, 0x6f, 0xd5, 0x6f, 0x7b, 0x6f, 0x91, 0x6f, 0x40, 0x5f, 0xc8, 0x2e, 0x60, 0x51, 0x0a, 0x25, 0x36, 0x88,
-    0xf4, 0x7f, 0xeb, 0x7f, 0x00, 0x32, 0x31, 0x52, 0x32, 0x30, 0x13, 0x30, 0x98, 0x2e, 0x15, 0xcb, 0x0a, 0x25, 0x33,
-    0x84, 0xd2, 0x7f, 0x43, 0x30, 0x05, 0x50, 0x2d, 0x52, 0x98, 0x2e, 0x95, 0xc1, 0xd2, 0x6f, 0x27, 0x52, 0x98, 0x2e,
-    0xd7, 0xc7, 0x2a, 0x25, 0xb0, 0x86, 0xc0, 0x7f, 0xd3, 0x7f, 0xaf, 0x84, 0x29, 0x50, 0xf1, 0x6f, 0x98, 0x2e, 0x4d,
-    0xc8, 0x2a, 0x25, 0xae, 0x8a, 0xaa, 0x88, 0xf2, 0x6e, 0x2b, 0x50, 0xc1, 0x6f, 0xd3, 0x6f, 0xf4, 0x7f, 0x98, 0x2e,
-    0xb6, 0xc8, 0xe0, 0x6e, 0x00, 0xb2, 0x32, 0x2f, 0x33, 0x54, 0x83, 0x86, 0xf1, 0x6f, 0xc3, 0x7f, 0x04, 0x30, 0x30,
-    0x30, 0xf4, 0x7f, 0xd0, 0x7f, 0xb2, 0x7f, 0xe3, 0x30, 0xc5, 0x6f, 0x56, 0x40, 0x45, 0x41, 0x28, 0x08, 0x03, 0x14,
-    0x0e, 0xb4, 0x08, 0xbc, 0x82, 0x40, 0x10, 0x0a, 0x2f, 0x54, 0x26, 0x05, 0x91, 0x7f, 0x44, 0x28, 0xa3, 0x7f, 0x98,
-    0x2e, 0xd9, 0xc0, 0x08, 0xb9, 0x33, 0x30, 0x53, 0x09, 0xc1, 0x6f, 0xd3, 0x6f, 0xf4, 0x6f, 0x83, 0x17, 0x47, 0x40,
-    0x6c, 0x15, 0xb2, 0x6f, 0xbe, 0x09, 0x75, 0x0b, 0x90, 0x42, 0x45, 0x42, 0x51, 0x0e, 0x32, 0xbc, 0x02, 0x89, 0xa1,
-    0x6f, 0x7e, 0x86, 0xf4, 0x7f, 0xd0, 0x7f, 0xb2, 0x7f, 0x04, 0x30, 0x91, 0x6f, 0xd6, 0x2f, 0xeb, 0x6f, 0xa0, 0x5e,
-    0xb8, 0x2e, 0x03, 0x2e, 0x97, 0x00, 0x1b, 0xbc, 0x60, 0x50, 0x9f, 0xbc, 0x0c, 0xb8, 0xf0, 0x7f, 0x40, 0xb2, 0xeb,
-    0x7f, 0x2b, 0x2f, 0x03, 0x2e, 0x7f, 0x00, 0x41, 0x40, 0x01, 0x2e, 0xc8, 0x00, 0x01, 0x1a, 0x11, 0x2f, 0x37, 0x58,
-    0x23, 0x2e, 0xc8, 0x00, 0x10, 0x41, 0xa0, 0x7f, 0x38, 0x81, 0x01, 0x41, 0xd0, 0x7f, 0xb1, 0x7f, 0x98, 0x2e, 0x64,
-    0xcf, 0xd0, 0x6f, 0x07, 0x80, 0xa1, 0x6f, 0x11, 0x42, 0x00, 0x2e, 0xb1, 0x6f, 0x01, 0x42, 0x11, 0x30, 0x01, 0x2e,
-    0xfc, 0x00, 0x00, 0xa8, 0x03, 0x30, 0xcb, 0x22, 0x4a, 0x25, 0x01, 0x2e, 0x7f, 0x00, 0x3c, 0x89, 0x35, 0x52, 0x05,
-    0x54, 0x98, 0x2e, 0xc4, 0xce, 0xc1, 0x6f, 0xf0, 0x6f, 0x98, 0x2e, 0x95, 0xcf, 0x04, 0x2d, 0x01, 0x30, 0xf0, 0x6f,
-    0x98, 0x2e, 0x95, 0xcf, 0xeb, 0x6f, 0xa0, 0x5f, 0xb8, 0x2e, 0x03, 0x2e, 0xb3, 0x00, 0x02, 0x32, 0xf0, 0x30, 0x03,
-    0x31, 0x30, 0x50, 0x8a, 0x08, 0x08, 0x08, 0xcb, 0x08, 0xe0, 0x7f, 0x80, 0xb2, 0xf3, 0x7f, 0xdb, 0x7f, 0x25, 0x2f,
-    0x03, 0x2e, 0xca, 0x00, 0x41, 0x90, 0x04, 0x2f, 0x01, 0x30, 0x23, 0x2e, 0xca, 0x00, 0x98, 0x2e, 0x3f, 0x03, 0xc0,
-    0xb2, 0x05, 0x2f, 0x03, 0x2e, 0xda, 0x00, 0x00, 0x30, 0x41, 0x04, 0x23, 0x2e, 0xda, 0x00, 0x98, 0x2e, 0x92, 0xb2,
-    0x10, 0x25, 0xf0, 0x6f, 0x00, 0xb2, 0x05, 0x2f, 0x01, 0x2e, 0xda, 0x00, 0x02, 0x30, 0x10, 0x04, 0x21, 0x2e, 0xda,
-    0x00, 0x40, 0xb2, 0x01, 0x2f, 0x23, 0x2e, 0xc8, 0x01, 0xdb, 0x6f, 0xe0, 0x6f, 0xd0, 0x5f, 0x80, 0x2e, 0x95, 0xcf,
-    0x01, 0x30, 0xe0, 0x6f, 0x98, 0x2e, 0x95, 0xcf, 0x11, 0x30, 0x23, 0x2e, 0xca, 0x00, 0xdb, 0x6f, 0xd0, 0x5f, 0xb8,
-    0x2e, 0xd0, 0x50, 0x0a, 0x25, 0x33, 0x84, 0x55, 0x50, 0xd2, 0x7f, 0xe2, 0x7f, 0x03, 0x8c, 0xc0, 0x7f, 0xbb, 0x7f,
-    0x00, 0x30, 0x05, 0x5a, 0x39, 0x54, 0x51, 0x41, 0xa5, 0x7f, 0x96, 0x7f, 0x80, 0x7f, 0x98, 0x2e, 0xd9, 0xc0, 0x05,
-    0x30, 0xf5, 0x7f, 0x20, 0x25, 0x91, 0x6f, 0x3b, 0x58, 0x3d, 0x5c, 0x3b, 0x56, 0x98, 0x2e, 0x67, 0xcc, 0xc1, 0x6f,
-    0xd5, 0x6f, 0x52, 0x40, 0x50, 0x43, 0xc1, 0x7f, 0xd5, 0x7f, 0x10, 0x25, 0x98, 0x2e, 0xfe, 0xc9, 0x10, 0x25, 0x98,
-    0x2e, 0x74, 0xc0, 0x86, 0x6f, 0x30, 0x28, 0x92, 0x6f, 0x82, 0x8c, 0xa5, 0x6f, 0x6f, 0x52, 0x69, 0x0e, 0x39, 0x54,
-    0xdb, 0x2f, 0x19, 0xa0, 0x15, 0x30, 0x03, 0x2f, 0x00, 0x30, 0x21, 0x2e, 0x81, 0x01, 0x0a, 0x2d, 0x01, 0x2e, 0x81,
-    0x01, 0x05, 0x28, 0x42, 0x36, 0x21, 0x2e, 0x81, 0x01, 0x02, 0x0e, 0x01, 0x2f, 0x98, 0x2e, 0xf3, 0x03, 0x57, 0x50,
-    0x12, 0x30, 0x01, 0x40, 0x98, 0x2e, 0xfe, 0xc9, 0x51, 0x6f, 0x0b, 0x5c, 0x8e, 0x0e, 0x3b, 0x6f, 0x57, 0x58, 0x02,
-    0x30, 0x21, 0x2e, 0x95, 0x01, 0x45, 0x6f, 0x2a, 0x8d, 0xd2, 0x7f, 0xcb, 0x7f, 0x13, 0x2f, 0x02, 0x30, 0x3f, 0x50,
-    0xd2, 0x7f, 0xa8, 0x0e, 0x0e, 0x2f, 0xc0, 0x6f, 0x53, 0x54, 0x02, 0x00, 0x51, 0x54, 0x42, 0x0e, 0x10, 0x30, 0x59,
-    0x52, 0x02, 0x30, 0x01, 0x2f, 0x00, 0x2e, 0x03, 0x2d, 0x50, 0x42, 0x42, 0x42, 0x12, 0x30, 0xd2, 0x7f, 0x80, 0xb2,
-    0x03, 0x2f, 0x00, 0x30, 0x21, 0x2e, 0x80, 0x01, 0x12, 0x2d, 0x01, 0x2e, 0xc9, 0x00, 0x02, 0x80, 0x05, 0x2e, 0x80,
-    0x01, 0x11, 0x30, 0x91, 0x28, 0x00, 0x40, 0x25, 0x2e, 0x80, 0x01, 0x10, 0x0e, 0x05, 0x2f, 0x01, 0x2e, 0x7f, 0x01,
-    0x01, 0x90, 0x01, 0x2f, 0x98, 0x2e, 0xf3, 0x03, 0x00, 0x2e, 0xa0, 0x41, 0x01, 0x90, 0xa6, 0x7f, 0x90, 0x2e, 0xe3,
-    0xb4, 0x01, 0x2e, 0x95, 0x01, 0x00, 0xa8, 0x90, 0x2e, 0xe3, 0xb4, 0x5b, 0x54, 0x95, 0x80, 0x82, 0x40, 0x80, 0xb2,
-    0x02, 0x40, 0x2d, 0x8c, 0x3f, 0x52, 0x96, 0x7f, 0x90, 0x2e, 0xc2, 0xb3, 0x29, 0x0e, 0x76, 0x2f, 0x01, 0x2e, 0xc9,
-    0x00, 0x00, 0x40, 0x81, 0x28, 0x45, 0x52, 0xb3, 0x30, 0x98, 0x2e, 0x0f, 0xca, 0x5d, 0x54, 0x80, 0x7f, 0x00, 0x2e,
-    0xa1, 0x40, 0x72, 0x7f, 0x82, 0x80, 0x82, 0x40, 0x60, 0x7f, 0x98, 0x2e, 0xfe, 0xc9, 0x10, 0x25, 0x98, 0x2e, 0x74,
-    0xc0, 0x62, 0x6f, 0x05, 0x30, 0x87, 0x40, 0xc0, 0x91, 0x04, 0x30, 0x05, 0x2f, 0x05, 0x2e, 0x83, 0x01, 0x80, 0xb2,
-    0x14, 0x30, 0x00, 0x2f, 0x04, 0x30, 0x05, 0x2e, 0xc9, 0x00, 0x73, 0x6f, 0x81, 0x40, 0xe2, 0x40, 0x69, 0x04, 0x11,
-    0x0f, 0xe1, 0x40, 0x16, 0x30, 0xfe, 0x29, 0xcb, 0x40, 0x02, 0x2f, 0x83, 0x6f, 0x83, 0x0f, 0x22, 0x2f, 0x47, 0x56,
-    0x13, 0x0f, 0x12, 0x30, 0x77, 0x2f, 0x49, 0x54, 0x42, 0x0e, 0x12, 0x30, 0x73, 0x2f, 0x00, 0x91, 0x0a, 0x2f, 0x01,
-    0x2e, 0x8b, 0x01, 0x19, 0xa8, 0x02, 0x30, 0x6c, 0x2f, 0x63, 0x50, 0x00, 0x2e, 0x17, 0x42, 0x05, 0x42, 0x68, 0x2c,
-    0x12, 0x30, 0x0b, 0x25, 0x08, 0x0f, 0x50, 0x30, 0x02, 0x2f, 0x21, 0x2e, 0x83, 0x01, 0x03, 0x2d, 0x40, 0x30, 0x21,
-    0x2e, 0x83, 0x01, 0x2b, 0x2e, 0x85, 0x01, 0x5a, 0x2c, 0x12, 0x30, 0x00, 0x91, 0x2b, 0x25, 0x04, 0x2f, 0x63, 0x50,
-    0x02, 0x30, 0x17, 0x42, 0x17, 0x2c, 0x02, 0x42, 0x98, 0x2e, 0xfe, 0xc9, 0x10, 0x25, 0x98, 0x2e, 0x74, 0xc0, 0x05,
-    0x2e, 0xc9, 0x00, 0x81, 0x84, 0x5b, 0x30, 0x82, 0x40, 0x37, 0x2e, 0x83, 0x01, 0x02, 0x0e, 0x07, 0x2f, 0x5f, 0x52,
-    0x40, 0x30, 0x62, 0x40, 0x41, 0x40, 0x91, 0x0e, 0x01, 0x2f, 0x21, 0x2e, 0x83, 0x01, 0x05, 0x30, 0x2b, 0x2e, 0x85,
-    0x01, 0x12, 0x30, 0x36, 0x2c, 0x16, 0x30, 0x15, 0x25, 0x81, 0x7f, 0x98, 0x2e, 0xfe, 0xc9, 0x10, 0x25, 0x98, 0x2e,
-    0x74, 0xc0, 0x19, 0xa2, 0x16, 0x30, 0x15, 0x2f, 0x05, 0x2e, 0x97, 0x01, 0x80, 0x6f, 0x82, 0x0e, 0x05, 0x2f, 0x01,
-    0x2e, 0x86, 0x01, 0x06, 0x28, 0x21, 0x2e, 0x86, 0x01, 0x0b, 0x2d, 0x03, 0x2e, 0x87, 0x01, 0x5f, 0x54, 0x4e, 0x28,
-    0x91, 0x42, 0x00, 0x2e, 0x82, 0x40, 0x90, 0x0e, 0x01, 0x2f, 0x21, 0x2e, 0x88, 0x01, 0x02, 0x30, 0x13, 0x2c, 0x05,
-    0x30, 0xc0, 0x6f, 0x08, 0x1c, 0xa8, 0x0f, 0x16, 0x30, 0x05, 0x30, 0x5b, 0x50, 0x09, 0x2f, 0x02, 0x80, 0x2d, 0x2e,
-    0x82, 0x01, 0x05, 0x42, 0x05, 0x80, 0x00, 0x2e, 0x02, 0x42, 0x3e, 0x80, 0x00, 0x2e, 0x06, 0x42, 0x02, 0x30, 0x90,
-    0x6f, 0x3e, 0x88, 0x01, 0x40, 0x04, 0x41, 0x4c, 0x28, 0x01, 0x42, 0x07, 0x80, 0x10, 0x25, 0x24, 0x40, 0x00, 0x40,
-    0x00, 0xa8, 0xf5, 0x22, 0x23, 0x29, 0x44, 0x42, 0x7a, 0x82, 0x7e, 0x88, 0x43, 0x40, 0x04, 0x41, 0x00, 0xab, 0xf5,
-    0x23, 0xdf, 0x28, 0x43, 0x42, 0xd9, 0xa0, 0x14, 0x2f, 0x00, 0x90, 0x02, 0x2f, 0xd2, 0x6f, 0x81, 0xb2, 0x05, 0x2f,
-    0x63, 0x54, 0x06, 0x28, 0x90, 0x42, 0x85, 0x42, 0x09, 0x2c, 0x02, 0x30, 0x5b, 0x50, 0x03, 0x80, 0x29, 0x2e, 0x7e,
-    0x01, 0x2b, 0x2e, 0x82, 0x01, 0x05, 0x42, 0x12, 0x30, 0x2b, 0x2e, 0x83, 0x01, 0x45, 0x82, 0x00, 0x2e, 0x40, 0x40,
-    0x7a, 0x82, 0x02, 0xa0, 0x08, 0x2f, 0x63, 0x50, 0x3b, 0x30, 0x15, 0x42, 0x05, 0x42, 0x37, 0x80, 0x37, 0x2e, 0x7e,
-    0x01, 0x05, 0x42, 0x12, 0x30, 0x01, 0x2e, 0xc9, 0x00, 0x02, 0x8c, 0x40, 0x40, 0x84, 0x41, 0x7a, 0x8c, 0x04, 0x0f,
-    0x03, 0x2f, 0x01, 0x2e, 0x8b, 0x01, 0x19, 0xa4, 0x04, 0x2f, 0x2b, 0x2e, 0x82, 0x01, 0x98, 0x2e, 0xf3, 0x03, 0x12,
-    0x30, 0x81, 0x90, 0x61, 0x52, 0x08, 0x2f, 0x65, 0x42, 0x65, 0x42, 0x43, 0x80, 0x39, 0x84, 0x82, 0x88, 0x05, 0x42,
-    0x45, 0x42, 0x85, 0x42, 0x05, 0x43, 0x00, 0x2e, 0x80, 0x41, 0x00, 0x90, 0x90, 0x2e, 0xe1, 0xb4, 0x65, 0x54, 0xc1,
-    0x6f, 0x80, 0x40, 0x00, 0xb2, 0x43, 0x58, 0x69, 0x50, 0x44, 0x2f, 0x55, 0x5c, 0xb7, 0x87, 0x8c, 0x0f, 0x0d, 0x2e,
-    0x96, 0x01, 0xc4, 0x40, 0x36, 0x2f, 0x41, 0x56, 0x8b, 0x0e, 0x2a, 0x2f, 0x0b, 0x52, 0xa1, 0x0e, 0x0a, 0x2f, 0x05,
-    0x2e, 0x8f, 0x01, 0x14, 0x25, 0x98, 0x2e, 0xfe, 0xc9, 0x4b, 0x54, 0x02, 0x0f, 0x69, 0x50, 0x05, 0x30, 0x65, 0x54,
-    0x15, 0x2f, 0x03, 0x2e, 0x8e, 0x01, 0x4d, 0x5c, 0x8e, 0x0f, 0x3a, 0x2f, 0x05, 0x2e, 0x8f, 0x01, 0x98, 0x2e, 0xfe,
-    0xc9, 0x4f, 0x54, 0x82, 0x0f, 0x05, 0x30, 0x69, 0x50, 0x65, 0x54, 0x30, 0x2f, 0x6d, 0x52, 0x15, 0x30, 0x42, 0x8c,
-    0x45, 0x42, 0x04, 0x30, 0x2b, 0x2c, 0x84, 0x43, 0x6b, 0x52, 0x42, 0x8c, 0x00, 0x2e, 0x85, 0x43, 0x15, 0x30, 0x24,
-    0x2c, 0x45, 0x42, 0x8e, 0x0f, 0x20, 0x2f, 0x0d, 0x2e, 0x8e, 0x01, 0xb1, 0x0e, 0x1c, 0x2f, 0x23, 0x2e, 0x8e, 0x01,
-    0x1a, 0x2d, 0x0e, 0x0e, 0x17, 0x2f, 0xa1, 0x0f, 0x15, 0x2f, 0x23, 0x2e, 0x8d, 0x01, 0x13, 0x2d, 0x98, 0x2e, 0x74,
-    0xc0, 0x43, 0x54, 0xc2, 0x0e, 0x0a, 0x2f, 0x65, 0x50, 0x04, 0x80, 0x0b, 0x30, 0x06, 0x82, 0x0b, 0x42, 0x79, 0x80,
-    0x41, 0x40, 0x12, 0x30, 0x25, 0x2e, 0x8c, 0x01, 0x01, 0x42, 0x05, 0x30, 0x69, 0x50, 0x65, 0x54, 0x84, 0x82, 0x43,
-    0x84, 0xbe, 0x8c, 0x84, 0x40, 0x86, 0x41, 0x26, 0x29, 0x94, 0x42, 0xbe, 0x8e, 0xd5, 0x7f, 0x19, 0xa1, 0x43, 0x40,
-    0x0b, 0x2e, 0x8c, 0x01, 0x84, 0x40, 0xc7, 0x41, 0x5d, 0x29, 0x27, 0x29, 0x45, 0x42, 0x84, 0x42, 0xc2, 0x7f, 0x01,
-    0x2f, 0xc0, 0xb3, 0x1d, 0x2f, 0x05, 0x2e, 0x94, 0x01, 0x99, 0xa0, 0x01, 0x2f, 0x80, 0xb3, 0x13, 0x2f, 0x80, 0xb3,
-    0x18, 0x2f, 0xc0, 0xb3, 0x16, 0x2f, 0x12, 0x40, 0x01, 0x40, 0x92, 0x7f, 0x98, 0x2e, 0x74, 0xc0, 0x92, 0x6f, 0x10,
-    0x0f, 0x20, 0x30, 0x03, 0x2f, 0x10, 0x30, 0x21, 0x2e, 0x7e, 0x01, 0x0a, 0x2d, 0x21, 0x2e, 0x7e, 0x01, 0x07, 0x2d,
-    0x20, 0x30, 0x21, 0x2e, 0x7e, 0x01, 0x03, 0x2d, 0x10, 0x30, 0x21, 0x2e, 0x7e, 0x01, 0xc2, 0x6f, 0x01, 0x2e, 0xc9,
-    0x00, 0xbc, 0x84, 0x02, 0x80, 0x82, 0x40, 0x00, 0x40, 0x90, 0x0e, 0xd5, 0x6f, 0x02, 0x2f, 0x15, 0x30, 0x98, 0x2e,
-    0xf3, 0x03, 0x41, 0x91, 0x05, 0x30, 0x07, 0x2f, 0x67, 0x50, 0x3d, 0x80, 0x2b, 0x2e, 0x8f, 0x01, 0x05, 0x42, 0x04,
-    0x80, 0x00, 0x2e, 0x05, 0x42, 0x02, 0x2c, 0x00, 0x30, 0x00, 0x30, 0xa2, 0x6f, 0x98, 0x8a, 0x86, 0x40, 0x80, 0xa7,
-    0x05, 0x2f, 0x98, 0x2e, 0xf3, 0x03, 0xc0, 0x30, 0x21, 0x2e, 0x95, 0x01, 0x06, 0x25, 0x1a, 0x25, 0xe2, 0x6f, 0x76,
-    0x82, 0x96, 0x40, 0x56, 0x43, 0x51, 0x0e, 0xfb, 0x2f, 0xbb, 0x6f, 0x30, 0x5f, 0xb8, 0x2e, 0x01, 0x2e, 0xb8, 0x00,
-    0x01, 0x31, 0x41, 0x08, 0x40, 0xb2, 0x20, 0x50, 0xf2, 0x30, 0x02, 0x08, 0xfb, 0x7f, 0x01, 0x30, 0x10, 0x2f, 0x05,
-    0x2e, 0xcc, 0x00, 0x81, 0x90, 0xe0, 0x7f, 0x03, 0x2f, 0x23, 0x2e, 0xcc, 0x00, 0x98, 0x2e, 0x55, 0xb6, 0x98, 0x2e,
-    0x1d, 0xb5, 0x10, 0x25, 0xfb, 0x6f, 0xe0, 0x6f, 0xe0, 0x5f, 0x80, 0x2e, 0x95, 0xcf, 0x98, 0x2e, 0x95, 0xcf, 0x10,
-    0x30, 0x21, 0x2e, 0xcc, 0x00, 0xfb, 0x6f, 0xe0, 0x5f, 0xb8, 0x2e, 0x00, 0x51, 0x05, 0x58, 0xeb, 0x7f, 0x2a, 0x25,
-    0x89, 0x52, 0x6f, 0x5a, 0x89, 0x50, 0x13, 0x41, 0x06, 0x40, 0xb3, 0x01, 0x16, 0x42, 0xcb, 0x16, 0x06, 0x40, 0xf3,
-    0x02, 0x13, 0x42, 0x65, 0x0e, 0xf5, 0x2f, 0x05, 0x40, 0x14, 0x30, 0x2c, 0x29, 0x04, 0x42, 0x08, 0xa1, 0x00, 0x30,
-    0x90, 0x2e, 0x52, 0xb6, 0xb3, 0x88, 0xb0, 0x8a, 0xb6, 0x84, 0xa4, 0x7f, 0xc4, 0x7f, 0xb5, 0x7f, 0xd5, 0x7f, 0x92,
-    0x7f, 0x73, 0x30, 0x04, 0x30, 0x55, 0x40, 0x42, 0x40, 0x8a, 0x17, 0xf3, 0x08, 0x6b, 0x01, 0x90, 0x02, 0x53, 0xb8,
-    0x4b, 0x82, 0xad, 0xbe, 0x71, 0x7f, 0x45, 0x0a, 0x09, 0x54, 0x84, 0x7f, 0x98, 0x2e, 0xd9, 0xc0, 0xa3, 0x6f, 0x7b,
-    0x54, 0xd0, 0x42, 0xa3, 0x7f, 0xf2, 0x7f, 0x60, 0x7f, 0x20, 0x25, 0x71, 0x6f, 0x75, 0x5a, 0x77, 0x58, 0x79, 0x5c,
-    0x75, 0x56, 0x98, 0x2e, 0x67, 0xcc, 0xb1, 0x6f, 0x62, 0x6f, 0x50, 0x42, 0xb1, 0x7f, 0xb3, 0x30, 0x10, 0x25, 0x98,
-    0x2e, 0x0f, 0xca, 0x84, 0x6f, 0x20, 0x29, 0x71, 0x6f, 0x92, 0x6f, 0xa5, 0x6f, 0x76, 0x82, 0x6a, 0x0e, 0x73, 0x30,
-    0x00, 0x30, 0xd0, 0x2f, 0xd2, 0x6f, 0xd1, 0x7f, 0xb4, 0x7f, 0x98, 0x2e, 0x2b, 0xb7, 0x15, 0xbd, 0x0b, 0xb8, 0x02,
-    0x0a, 0xc2, 0x6f, 0xc0, 0x7f, 0x98, 0x2e, 0x2b, 0xb7, 0x15, 0xbd, 0x0b, 0xb8, 0x42, 0x0a, 0xc0, 0x6f, 0x08, 0x17,
-    0x41, 0x18, 0x89, 0x16, 0xe1, 0x18, 0xd0, 0x18, 0xa1, 0x7f, 0x27, 0x25, 0x16, 0x25, 0x98, 0x2e, 0x79, 0xc0, 0x8b,
-    0x54, 0x90, 0x7f, 0xb3, 0x30, 0x82, 0x40, 0x80, 0x90, 0x0d, 0x2f, 0x7d, 0x52, 0x92, 0x6f, 0x98, 0x2e, 0x0f, 0xca,
-    0xb2, 0x6f, 0x90, 0x0e, 0x06, 0x2f, 0x8b, 0x50, 0x14, 0x30, 0x42, 0x6f, 0x51, 0x6f, 0x14, 0x42, 0x12, 0x42, 0x01,
-    0x42, 0x00, 0x2e, 0x31, 0x6f, 0x98, 0x2e, 0x74, 0xc0, 0x41, 0x6f, 0x80, 0x7f, 0x98, 0x2e, 0x74, 0xc0, 0x82, 0x6f,
-    0x10, 0x04, 0x43, 0x52, 0x01, 0x0f, 0x05, 0x2e, 0xcb, 0x00, 0x00, 0x30, 0x04, 0x30, 0x21, 0x2f, 0x51, 0x6f, 0x43,
-    0x58, 0x8c, 0x0e, 0x04, 0x30, 0x1c, 0x2f, 0x85, 0x88, 0x41, 0x6f, 0x04, 0x41, 0x8c, 0x0f, 0x04, 0x30, 0x16, 0x2f,
-    0x84, 0x88, 0x00, 0x2e, 0x04, 0x41, 0x04, 0x05, 0x8c, 0x0e, 0x04, 0x30, 0x0f, 0x2f, 0x82, 0x88, 0x31, 0x6f, 0x04,
-    0x41, 0x04, 0x05, 0x8c, 0x0e, 0x04, 0x30, 0x08, 0x2f, 0x83, 0x88, 0x00, 0x2e, 0x04, 0x41, 0x8c, 0x0f, 0x04, 0x30,
-    0x02, 0x2f, 0x21, 0x2e, 0xad, 0x01, 0x14, 0x30, 0x00, 0x91, 0x14, 0x2f, 0x03, 0x2e, 0xa1, 0x01, 0x41, 0x90, 0x0e,
-    0x2f, 0x03, 0x2e, 0xad, 0x01, 0x14, 0x30, 0x4c, 0x28, 0x23, 0x2e, 0xad, 0x01, 0x46, 0xa0, 0x06, 0x2f, 0x81, 0x84,
-    0x8d, 0x52, 0x48, 0x82, 0x82, 0x40, 0x21, 0x2e, 0xa1, 0x01, 0x42, 0x42, 0x5c, 0x2c, 0x02, 0x30, 0x05, 0x2e, 0xaa,
-    0x01, 0x80, 0xb2, 0x02, 0x30, 0x55, 0x2f, 0x03, 0x2e, 0xa9, 0x01, 0x92, 0x6f, 0xb3, 0x30, 0x98, 0x2e, 0x0f, 0xca,
-    0xb2, 0x6f, 0x90, 0x0f, 0x00, 0x30, 0x02, 0x30, 0x4a, 0x2f, 0xa2, 0x6f, 0x87, 0x52, 0x91, 0x00, 0x85, 0x52, 0x51,
-    0x0e, 0x02, 0x2f, 0x00, 0x2e, 0x43, 0x2c, 0x02, 0x30, 0xc2, 0x6f, 0x7f, 0x52, 0x91, 0x0e, 0x02, 0x30, 0x3c, 0x2f,
-    0x51, 0x6f, 0x81, 0x54, 0x98, 0x2e, 0xfe, 0xc9, 0x10, 0x25, 0xb3, 0x30, 0x21, 0x25, 0x98, 0x2e, 0x0f, 0xca, 0x32,
-    0x6f, 0xc0, 0x7f, 0xb3, 0x30, 0x12, 0x25, 0x98, 0x2e, 0x0f, 0xca, 0x42, 0x6f, 0xb0, 0x7f, 0xb3, 0x30, 0x12, 0x25,
-    0x98, 0x2e, 0x0f, 0xca, 0xb2, 0x6f, 0x90, 0x28, 0x83, 0x52, 0x98, 0x2e, 0xfe, 0xc9, 0xc2, 0x6f, 0x90, 0x0f, 0x00,
-    0x30, 0x02, 0x30, 0x1d, 0x2f, 0x05, 0x2e, 0xa1, 0x01, 0x80, 0xb2, 0x12, 0x30, 0x0f, 0x2f, 0x42, 0x6f, 0x03, 0x2e,
-    0xab, 0x01, 0x91, 0x0e, 0x02, 0x30, 0x12, 0x2f, 0x52, 0x6f, 0x03, 0x2e, 0xac, 0x01, 0x91, 0x0f, 0x02, 0x30, 0x0c,
-    0x2f, 0x21, 0x2e, 0xaa, 0x01, 0x0a, 0x2c, 0x12, 0x30, 0x03, 0x2e, 0xcb, 0x00, 0x8d, 0x58, 0x08, 0x89, 0x41, 0x40,
-    0x11, 0x43, 0x00, 0x43, 0x25, 0x2e, 0xa1, 0x01, 0xd4, 0x6f, 0x8f, 0x52, 0x00, 0x43, 0x3a, 0x89, 0x00, 0x2e, 0x10,
-    0x43, 0x10, 0x43, 0x61, 0x0e, 0xfb, 0x2f, 0x03, 0x2e, 0xa0, 0x01, 0x11, 0x1a, 0x02, 0x2f, 0x02, 0x25, 0x21, 0x2e,
-    0xa0, 0x01, 0xeb, 0x6f, 0x00, 0x5f, 0xb8, 0x2e, 0x91, 0x52, 0x10, 0x30, 0x02, 0x30, 0x95, 0x56, 0x52, 0x42, 0x4b,
-    0x0e, 0xfc, 0x2f, 0x8d, 0x54, 0x88, 0x82, 0x93, 0x56, 0x80, 0x42, 0x53, 0x42, 0x40, 0x42, 0x42, 0x86, 0x83, 0x54,
-    0xc0, 0x2e, 0xc2, 0x42, 0x00, 0x2e, 0xa3, 0x52, 0x00, 0x51, 0x52, 0x40, 0x47, 0x40, 0x1a, 0x25, 0x01, 0x2e, 0x97,
-    0x00, 0x8f, 0xbe, 0x72, 0x86, 0xfb, 0x7f, 0x0b, 0x30, 0x7c, 0xbf, 0xa5, 0x50, 0x10, 0x08, 0xdf, 0xba, 0x70, 0x88,
-    0xf8, 0xbf, 0xcb, 0x42, 0xd3, 0x7f, 0x6c, 0xbb, 0xfc, 0xbb, 0xc5, 0x0a, 0x90, 0x7f, 0x1b, 0x7f, 0x0b, 0x43, 0xc0,
-    0xb2, 0xe5, 0x7f, 0xb7, 0x7f, 0xa6, 0x7f, 0xc4, 0x7f, 0x90, 0x2e, 0x1c, 0xb7, 0x07, 0x2e, 0xd2, 0x00, 0xc0, 0xb2,
-    0x0b, 0x2f, 0x97, 0x52, 0x01, 0x2e, 0xcd, 0x00, 0x82, 0x7f, 0x98, 0x2e, 0xbb, 0xcc, 0x0b, 0x30, 0x37, 0x2e, 0xd2,
-    0x00, 0x82, 0x6f, 0x90, 0x6f, 0x1a, 0x25, 0x00, 0xb2, 0x8b, 0x7f, 0x14, 0x2f, 0xa6, 0xbd, 0x25, 0xbd, 0xb6, 0xb9,
-    0x2f, 0xb9, 0x80, 0xb2, 0xd4, 0xb0, 0x0c, 0x2f, 0x99, 0x54, 0x9b, 0x56, 0x0b, 0x30, 0x0b, 0x2e, 0xb1, 0x00, 0xa1,
-    0x58, 0x9b, 0x42, 0xdb, 0x42, 0x6c, 0x09, 0x2b, 0x2e, 0xb1, 0x00, 0x8b, 0x42, 0xcb, 0x42, 0x86, 0x7f, 0x73, 0x84,
-    0xa7, 0x56, 0xc3, 0x08, 0x39, 0x52, 0x05, 0x50, 0x72, 0x7f, 0x63, 0x7f, 0x98, 0x2e, 0xc2, 0xc0, 0xe1, 0x6f, 0x62,
-    0x6f, 0xd1, 0x0a, 0x01, 0x2e, 0xcd, 0x00, 0xd5, 0x6f, 0xc4, 0x6f, 0x72, 0x6f, 0x97, 0x52, 0x9d, 0x5c, 0x98, 0x2e,
-    0x06, 0xcd, 0x23, 0x6f, 0x90, 0x6f, 0x99, 0x52, 0xc0, 0xb2, 0x04, 0xbd, 0x54, 0x40, 0xaf, 0xb9, 0x45, 0x40, 0xe1,
-    0x7f, 0x02, 0x30, 0x06, 0x2f, 0xc0, 0xb2, 0x02, 0x30, 0x03, 0x2f, 0x9b, 0x5c, 0x12, 0x30, 0x94, 0x43, 0x85, 0x43,
-    0x03, 0xbf, 0x6f, 0xbb, 0x80, 0xb3, 0x20, 0x2f, 0x06, 0x6f, 0x26, 0x01, 0x16, 0x6f, 0x6e, 0x03, 0x45, 0x42, 0xc0,
-    0x90, 0x29, 0x2e, 0xce, 0x00, 0x9b, 0x52, 0x14, 0x2f, 0x9b, 0x5c, 0x00, 0x2e, 0x93, 0x41, 0x86, 0x41, 0xe3, 0x04,
-    0xae, 0x07, 0x80, 0xab, 0x04, 0x2f, 0x80, 0x91, 0x0a, 0x2f, 0x86, 0x6f, 0x73, 0x0f, 0x07, 0x2f, 0x83, 0x6f, 0xc0,
-    0xb2, 0x04, 0x2f, 0x54, 0x42, 0x45, 0x42, 0x12, 0x30, 0x04, 0x2c, 0x11, 0x30, 0x02, 0x2c, 0x11, 0x30, 0x11, 0x30,
-    0x02, 0xbc, 0x0f, 0xb8, 0xd2, 0x7f, 0x00, 0xb2, 0x0a, 0x2f, 0x01, 0x2e, 0xfc, 0x00, 0x05, 0x2e, 0xc7, 0x01, 0x10,
-    0x1a, 0x02, 0x2f, 0x21, 0x2e, 0xc7, 0x01, 0x03, 0x2d, 0x02, 0x2c, 0x01, 0x30, 0x01, 0x30, 0xb0, 0x6f, 0x98, 0x2e,
-    0x95, 0xcf, 0xd1, 0x6f, 0xa0, 0x6f, 0x98, 0x2e, 0x95, 0xcf, 0xe2, 0x6f, 0x9f, 0x52, 0x01, 0x2e, 0xce, 0x00, 0x82,
-    0x40, 0x50, 0x42, 0x0c, 0x2c, 0x42, 0x42, 0x11, 0x30, 0x23, 0x2e, 0xd2, 0x00, 0x01, 0x30, 0xb0, 0x6f, 0x98, 0x2e,
-    0x95, 0xcf, 0xa0, 0x6f, 0x01, 0x30, 0x98, 0x2e, 0x95, 0xcf, 0x00, 0x2e, 0xfb, 0x6f, 0x00, 0x5f, 0xb8, 0x2e, 0x83,
-    0x86, 0x01, 0x30, 0x00, 0x30, 0x94, 0x40, 0x24, 0x18, 0x06, 0x00, 0x53, 0x0e, 0x4f, 0x02, 0xf9, 0x2f, 0xb8, 0x2e,
-    0xa9, 0x52, 0x00, 0x2e, 0x60, 0x40, 0x41, 0x40, 0x0d, 0xbc, 0x98, 0xbc, 0xc0, 0x2e, 0x01, 0x0a, 0x0f, 0xb8, 0xab,
-    0x52, 0x53, 0x3c, 0x52, 0x40, 0x40, 0x40, 0x4b, 0x00, 0x82, 0x16, 0x26, 0xb9, 0x01, 0xb8, 0x41, 0x40, 0x10, 0x08,
-    0x97, 0xb8, 0x01, 0x08, 0xc0, 0x2e, 0x11, 0x30, 0x01, 0x08, 0x43, 0x86, 0x25, 0x40, 0x04, 0x40, 0xd8, 0xbe, 0x2c,
-    0x0b, 0x22, 0x11, 0x54, 0x42, 0x03, 0x80, 0x4b, 0x0e, 0xf6, 0x2f, 0xb8, 0x2e, 0x9f, 0x50, 0x10, 0x50, 0xad, 0x52,
-    0x05, 0x2e, 0xd3, 0x00, 0xfb, 0x7f, 0x00, 0x2e, 0x13, 0x40, 0x93, 0x42, 0x41, 0x0e, 0xfb, 0x2f, 0x98, 0x2e, 0xa5,
-    0xb7, 0x98, 0x2e, 0x87, 0xcf, 0x01, 0x2e, 0xd9, 0x00, 0x00, 0xb2, 0xfb, 0x6f, 0x0b, 0x2f, 0x01, 0x2e, 0x69, 0xf7,
-    0xb1, 0x3f, 0x01, 0x08, 0x01, 0x30, 0xf0, 0x5f, 0x23, 0x2e, 0xd9, 0x00, 0x21, 0x2e, 0x69, 0xf7, 0x80, 0x2e, 0x7a,
-    0xb7, 0xf0, 0x5f, 0xb8, 0x2e, 0x01, 0x2e, 0xc0, 0xf8, 0x03, 0x2e, 0xfc, 0xf5, 0x15, 0x54, 0xaf, 0x56, 0x82, 0x08,
-    0x0b, 0x2e, 0x69, 0xf7, 0xcb, 0x0a, 0xb1, 0x58, 0x80, 0x90, 0xdd, 0xbe, 0x4c, 0x08, 0x5f, 0xb9, 0x59, 0x22, 0x80,
-    0x90, 0x07, 0x2f, 0x03, 0x34, 0xc3, 0x08, 0xf2, 0x3a, 0x0a, 0x08, 0x02, 0x35, 0xc0, 0x90, 0x4a, 0x0a, 0x48, 0x22,
-    0xc0, 0x2e, 0x23, 0x2e, 0xfc, 0xf5, 0x10, 0x50, 0xfb, 0x7f, 0x98, 0x2e, 0x56, 0xc7, 0x98, 0x2e, 0x49, 0xc3, 0x10,
-    0x30, 0xfb, 0x6f, 0xf0, 0x5f, 0x21, 0x2e, 0xcc, 0x00, 0x21, 0x2e, 0xca, 0x00, 0xb8, 0x2e, 0x03, 0x2e, 0xd3, 0x00,
-    0x16, 0xb8, 0x02, 0x34, 0x4a, 0x0c, 0x21, 0x2e, 0x2d, 0xf5, 0xc0, 0x2e, 0x23, 0x2e, 0xd3, 0x00, 0x03, 0xbc, 0x21,
-    0x2e, 0xd5, 0x00, 0x03, 0x2e, 0xd5, 0x00, 0x40, 0xb2, 0x10, 0x30, 0x21, 0x2e, 0x77, 0x00, 0x01, 0x30, 0x05, 0x2f,
-    0x05, 0x2e, 0xd8, 0x00, 0x80, 0x90, 0x01, 0x2f, 0x23, 0x2e, 0x6f, 0xf5, 0xc0, 0x2e, 0x21, 0x2e, 0xd9, 0x00, 0x11,
-    0x30, 0x81, 0x08, 0x01, 0x2e, 0x6a, 0xf7, 0x71, 0x3f, 0x23, 0xbd, 0x01, 0x08, 0x02, 0x0a, 0xc0, 0x2e, 0x21, 0x2e,
-    0x6a, 0xf7, 0x30, 0x25, 0x00, 0x30, 0x21, 0x2e, 0x5a, 0xf5, 0x10, 0x50, 0x21, 0x2e, 0x7b, 0x00, 0x21, 0x2e, 0x7c,
-    0x00, 0xfb, 0x7f, 0x98, 0x2e, 0xc3, 0xb7, 0x40, 0x30, 0x21, 0x2e, 0xd4, 0x00, 0xfb, 0x6f, 0xf0, 0x5f, 0x03, 0x25,
-    0x80, 0x2e, 0xaf, 0xb7, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00,
-    0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e,
-    0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80,
-    0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x01, 0x2e, 0x5d, 0xf7, 0x08, 0xbc, 0x80, 0xac, 0x0e, 0xbb, 0x02, 0x2f,
-    0x00, 0x30, 0x41, 0x04, 0x82, 0x06, 0xc0, 0xa4, 0x00, 0x30, 0x11, 0x2f, 0x40, 0xa9, 0x03, 0x2f, 0x40, 0x91, 0x0d,
-    0x2f, 0x00, 0xa7, 0x0b, 0x2f, 0x80, 0xb3, 0xb3, 0x58, 0x02, 0x2f, 0x90, 0xa1, 0x26, 0x13, 0x20, 0x23, 0x80, 0x90,
-    0x10, 0x30, 0x01, 0x2f, 0xcc, 0x0e, 0x00, 0x2f, 0x00, 0x30, 0xb8, 0x2e, 0xb5, 0x50, 0x18, 0x08, 0x08, 0xbc, 0x88,
-    0xb6, 0x0d, 0x17, 0xc6, 0xbd, 0x56, 0xbc, 0xb7, 0x58, 0xda, 0xba, 0x04, 0x01, 0x1d, 0x0a, 0x10, 0x50, 0x05, 0x30,
-    0x32, 0x25, 0x45, 0x03, 0xfb, 0x7f, 0xf6, 0x30, 0x21, 0x25, 0x98, 0x2e, 0x37, 0xca, 0x16, 0xb5, 0x9a, 0xbc, 0x06,
-    0xb8, 0x80, 0xa8, 0x41, 0x0a, 0x0e, 0x2f, 0x80, 0x90, 0x02, 0x2f, 0x2d, 0x50, 0x48, 0x0f, 0x09, 0x2f, 0xbf, 0xa0,
-    0x04, 0x2f, 0xbf, 0x90, 0x06, 0x2f, 0xb7, 0x54, 0xca, 0x0f, 0x03, 0x2f, 0x00, 0x2e, 0x02, 0x2c, 0xb7, 0x52, 0x2d,
-    0x52, 0xf2, 0x33, 0x98, 0x2e, 0xd9, 0xc0, 0xfb, 0x6f, 0xf1, 0x37, 0xc0, 0x2e, 0x01, 0x08, 0xf0, 0x5f, 0xbf, 0x56,
-    0xb9, 0x54, 0xd0, 0x40, 0xc4, 0x40, 0x0b, 0x2e, 0xfd, 0xf3, 0xbf, 0x52, 0x90, 0x42, 0x94, 0x42, 0x95, 0x42, 0x05,
-    0x30, 0xc1, 0x50, 0x0f, 0x88, 0x06, 0x40, 0x04, 0x41, 0x96, 0x42, 0xc5, 0x42, 0x48, 0xbe, 0x73, 0x30, 0x0d, 0x2e,
-    0xd8, 0x00, 0x4f, 0xba, 0x84, 0x42, 0x03, 0x42, 0x81, 0xb3, 0x02, 0x2f, 0x2b, 0x2e, 0x6f, 0xf5, 0x06, 0x2d, 0x05,
-    0x2e, 0x77, 0xf7, 0xbd, 0x56, 0x93, 0x08, 0x25, 0x2e, 0x77, 0xf7, 0xbb, 0x54, 0x25, 0x2e, 0xc2, 0xf5, 0x07, 0x2e,
-    0xfd, 0xf3, 0x42, 0x30, 0xb4, 0x33, 0xda, 0x0a, 0x4c, 0x00, 0x27, 0x2e, 0xfd, 0xf3, 0x43, 0x40, 0xd4, 0x3f, 0xdc,
-    0x08, 0x43, 0x42, 0x00, 0x2e, 0x00, 0x2e, 0x43, 0x40, 0x24, 0x30, 0xdc, 0x0a, 0x43, 0x42, 0x04, 0x80, 0x03, 0x2e,
-    0xfd, 0xf3, 0x4a, 0x0a, 0x23, 0x2e, 0xfd, 0xf3, 0x61, 0x34, 0xc0, 0x2e, 0x01, 0x42, 0x00, 0x2e, 0x60, 0x50, 0x1a,
-    0x25, 0x7a, 0x86, 0xe0, 0x7f, 0xf3, 0x7f, 0x03, 0x25, 0xc3, 0x52, 0x41, 0x84, 0xdb, 0x7f, 0x33, 0x30, 0x98, 0x2e,
-    0x16, 0xc2, 0x1a, 0x25, 0x7d, 0x82, 0xf0, 0x6f, 0xe2, 0x6f, 0x32, 0x25, 0x16, 0x40, 0x94, 0x40, 0x26, 0x01, 0x85,
-    0x40, 0x8e, 0x17, 0xc4, 0x42, 0x6e, 0x03, 0x95, 0x42, 0x41, 0x0e, 0xf4, 0x2f, 0xdb, 0x6f, 0xa0, 0x5f, 0xb8, 0x2e,
-    0xb0, 0x51, 0xfb, 0x7f, 0x98, 0x2e, 0xe8, 0x0d, 0x5a, 0x25, 0x98, 0x2e, 0x0f, 0x0e, 0xcb, 0x58, 0x32, 0x87, 0xc4,
-    0x7f, 0x65, 0x89, 0x6b, 0x8d, 0xc5, 0x5a, 0x65, 0x7f, 0xe1, 0x7f, 0x83, 0x7f, 0xa6, 0x7f, 0x74, 0x7f, 0xd0, 0x7f,
-    0xb6, 0x7f, 0x94, 0x7f, 0x17, 0x30, 0xc7, 0x52, 0xc9, 0x54, 0x51, 0x7f, 0x00, 0x2e, 0x85, 0x6f, 0x42, 0x7f, 0x00,
-    0x2e, 0x51, 0x41, 0x45, 0x81, 0x42, 0x41, 0x13, 0x40, 0x3b, 0x8a, 0x00, 0x40, 0x4b, 0x04, 0xd0, 0x06, 0xc0, 0xac,
-    0x85, 0x7f, 0x02, 0x2f, 0x02, 0x30, 0x51, 0x04, 0xd3, 0x06, 0x41, 0x84, 0x05, 0x30, 0x5d, 0x02, 0xc9, 0x16, 0xdf,
-    0x08, 0xd3, 0x00, 0x8d, 0x02, 0xaf, 0xbc, 0xb1, 0xb9, 0x59, 0x0a, 0x65, 0x6f, 0x11, 0x43, 0xa1, 0xb4, 0x52, 0x41,
-    0x53, 0x41, 0x01, 0x43, 0x34, 0x7f, 0x65, 0x7f, 0x26, 0x31, 0xe5, 0x6f, 0xd4, 0x6f, 0x98, 0x2e, 0x37, 0xca, 0x32,
-    0x6f, 0x75, 0x6f, 0x83, 0x40, 0x42, 0x41, 0x23, 0x7f, 0x12, 0x7f, 0xf6, 0x30, 0x40, 0x25, 0x51, 0x25, 0x98, 0x2e,
-    0x37, 0xca, 0x14, 0x6f, 0x20, 0x05, 0x70, 0x6f, 0x25, 0x6f, 0x69, 0x07, 0xa2, 0x6f, 0x31, 0x6f, 0x0b, 0x30, 0x04,
-    0x42, 0x9b, 0x42, 0x8b, 0x42, 0x55, 0x42, 0x32, 0x7f, 0x40, 0xa9, 0xc3, 0x6f, 0x71, 0x7f, 0x02, 0x30, 0xd0, 0x40,
-    0xc3, 0x7f, 0x03, 0x2f, 0x40, 0x91, 0x15, 0x2f, 0x00, 0xa7, 0x13, 0x2f, 0x00, 0xa4, 0x11, 0x2f, 0x84, 0xbd, 0x98,
-    0x2e, 0x79, 0xca, 0x55, 0x6f, 0xb7, 0x54, 0x54, 0x41, 0x82, 0x00, 0xf3, 0x3f, 0x45, 0x41, 0xcb, 0x02, 0xf6, 0x30,
-    0x98, 0x2e, 0x37, 0xca, 0x35, 0x6f, 0xa4, 0x6f, 0x41, 0x43, 0x03, 0x2c, 0x00, 0x43, 0xa4, 0x6f, 0x35, 0x6f, 0x17,
-    0x30, 0x42, 0x6f, 0x51, 0x6f, 0x93, 0x40, 0x42, 0x82, 0x00, 0x41, 0xc3, 0x00, 0x03, 0x43, 0x51, 0x7f, 0x00, 0x2e,
-    0x94, 0x40, 0x41, 0x41, 0x4c, 0x02, 0xc4, 0x6f, 0xd1, 0x56, 0x63, 0x0e, 0x74, 0x6f, 0x51, 0x43, 0xa5, 0x7f, 0x8a,
-    0x2f, 0x09, 0x2e, 0xd8, 0x00, 0x01, 0xb3, 0x21, 0x2f, 0xcb, 0x58, 0x90, 0x6f, 0x13, 0x41, 0xb6, 0x6f, 0xe4, 0x7f,
-    0x00, 0x2e, 0x91, 0x41, 0x14, 0x40, 0x92, 0x41, 0x15, 0x40, 0x17, 0x2e, 0x6f, 0xf5, 0xb6, 0x7f, 0xd0, 0x7f, 0xcb,
-    0x7f, 0x98, 0x2e, 0x00, 0x0c, 0x07, 0x15, 0xc2, 0x6f, 0x14, 0x0b, 0x29, 0x2e, 0x6f, 0xf5, 0xc3, 0xa3, 0xc1, 0x8f,
-    0xe4, 0x6f, 0xd0, 0x6f, 0xe6, 0x2f, 0x14, 0x30, 0x05, 0x2e, 0x6f, 0xf5, 0x14, 0x0b, 0x29, 0x2e, 0x6f, 0xf5, 0x18,
-    0x2d, 0xcd, 0x56, 0x04, 0x32, 0xb5, 0x6f, 0x1c, 0x01, 0x51, 0x41, 0x52, 0x41, 0xc3, 0x40, 0xb5, 0x7f, 0xe4, 0x7f,
-    0x98, 0x2e, 0x1f, 0x0c, 0xe4, 0x6f, 0x21, 0x87, 0x00, 0x43, 0x04, 0x32, 0xcf, 0x54, 0x5a, 0x0e, 0xef, 0x2f, 0x15,
-    0x54, 0x09, 0x2e, 0x77, 0xf7, 0x22, 0x0b, 0x29, 0x2e, 0x77, 0xf7, 0xfb, 0x6f, 0x50, 0x5e, 0xb8, 0x2e, 0x10, 0x50,
-    0x01, 0x2e, 0xd4, 0x00, 0x00, 0xb2, 0xfb, 0x7f, 0x51, 0x2f, 0x01, 0xb2, 0x48, 0x2f, 0x02, 0xb2, 0x42, 0x2f, 0x03,
-    0x90, 0x56, 0x2f, 0xd7, 0x52, 0x79, 0x80, 0x42, 0x40, 0x81, 0x84, 0x00, 0x40, 0x42, 0x42, 0x98, 0x2e, 0x93, 0x0c,
-    0xd9, 0x54, 0xd7, 0x50, 0xa1, 0x40, 0x98, 0xbd, 0x82, 0x40, 0x3e, 0x82, 0xda, 0x0a, 0x44, 0x40, 0x8b, 0x16, 0xe3,
-    0x00, 0x53, 0x42, 0x00, 0x2e, 0x43, 0x40, 0x9a, 0x02, 0x52, 0x42, 0x00, 0x2e, 0x41, 0x40, 0x15, 0x54, 0x4a, 0x0e,
-    0x3a, 0x2f, 0x3a, 0x82, 0x00, 0x30, 0x41, 0x40, 0x21, 0x2e, 0x85, 0x0f, 0x40, 0xb2, 0x0a, 0x2f, 0x98, 0x2e, 0xb1,
-    0x0c, 0x98, 0x2e, 0x45, 0x0e, 0x98, 0x2e, 0x5b, 0x0e, 0xfb, 0x6f, 0xf0, 0x5f, 0x00, 0x30, 0x80, 0x2e, 0xce, 0xb7,
-    0xdd, 0x52, 0xd3, 0x54, 0x42, 0x42, 0x4f, 0x84, 0x73, 0x30, 0xdb, 0x52, 0x83, 0x42, 0x1b, 0x30, 0x6b, 0x42, 0x23,
-    0x30, 0x27, 0x2e, 0xd7, 0x00, 0x37, 0x2e, 0xd4, 0x00, 0x21, 0x2e, 0xd6, 0x00, 0x7a, 0x84, 0x17, 0x2c, 0x42, 0x42,
-    0x30, 0x30, 0x21, 0x2e, 0xd4, 0x00, 0x12, 0x2d, 0x21, 0x30, 0x00, 0x30, 0x23, 0x2e, 0xd4, 0x00, 0x21, 0x2e, 0x7b,
-    0xf7, 0x0b, 0x2d, 0x17, 0x30, 0x98, 0x2e, 0x51, 0x0c, 0xd5, 0x50, 0x0c, 0x82, 0x72, 0x30, 0x2f, 0x2e, 0xd4, 0x00,
-    0x25, 0x2e, 0x7b, 0xf7, 0x40, 0x42, 0x00, 0x2e, 0xfb, 0x6f, 0xf0, 0x5f, 0xb8, 0x2e, 0x70, 0x50, 0x0a, 0x25, 0x39,
-    0x86, 0xfb, 0x7f, 0xe1, 0x32, 0x62, 0x30, 0x98, 0x2e, 0xc2, 0xc4, 0xb5, 0x56, 0xa5, 0x6f, 0xab, 0x08, 0x91, 0x6f,
-    0x4b, 0x08, 0xdf, 0x56, 0xc4, 0x6f, 0x23, 0x09, 0x4d, 0xba, 0x93, 0xbc, 0x8c, 0x0b, 0xd1, 0x6f, 0x0b, 0x09, 0xcb,
-    0x52, 0xe1, 0x5e, 0x56, 0x42, 0xaf, 0x09, 0x4d, 0xba, 0x23, 0xbd, 0x94, 0x0a, 0xe5, 0x6f, 0x68, 0xbb, 0xeb, 0x08,
-    0xbd, 0xb9, 0x63, 0xbe, 0xfb, 0x6f, 0x52, 0x42, 0xe3, 0x0a, 0xc0, 0x2e, 0x43, 0x42, 0x90, 0x5f, 0xd1, 0x50, 0x03,
-    0x2e, 0x25, 0xf3, 0x13, 0x40, 0x00, 0x40, 0x9b, 0xbc, 0x9b, 0xb4, 0x08, 0xbd, 0xb8, 0xb9, 0x98, 0xbc, 0xda, 0x0a,
-    0x08, 0xb6, 0x89, 0x16, 0xc0, 0x2e, 0x19, 0x00, 0x62, 0x02, 0x10, 0x50, 0xfb, 0x7f, 0x98, 0x2e, 0x81, 0x0d, 0x01,
-    0x2e, 0xd4, 0x00, 0x31, 0x30, 0x08, 0x04, 0xfb, 0x6f, 0x01, 0x30, 0xf0, 0x5f, 0x23, 0x2e, 0xd6, 0x00, 0x21, 0x2e,
-    0xd7, 0x00, 0xb8, 0x2e, 0x01, 0x2e, 0xd7, 0x00, 0x03, 0x2e, 0xd6, 0x00, 0x48, 0x0e, 0x01, 0x2f, 0x80, 0x2e, 0x1f,
-    0x0e, 0xb8, 0x2e, 0xe3, 0x50, 0x21, 0x34, 0x01, 0x42, 0x82, 0x30, 0xc1, 0x32, 0x25, 0x2e, 0x62, 0xf5, 0x01, 0x00,
-    0x22, 0x30, 0x01, 0x40, 0x4a, 0x0a, 0x01, 0x42, 0xb8, 0x2e, 0xe3, 0x54, 0xf0, 0x3b, 0x83, 0x40, 0xd8, 0x08, 0xe5,
-    0x52, 0x83, 0x42, 0x00, 0x30, 0x83, 0x30, 0x50, 0x42, 0xc4, 0x32, 0x27, 0x2e, 0x64, 0xf5, 0x94, 0x00, 0x50, 0x42,
-    0x40, 0x42, 0xd3, 0x3f, 0x84, 0x40, 0x7d, 0x82, 0xe3, 0x08, 0x40, 0x42, 0x83, 0x42, 0xb8, 0x2e, 0xdd, 0x52, 0x00,
-    0x30, 0x40, 0x42, 0x7c, 0x86, 0xb9, 0x52, 0x09, 0x2e, 0x70, 0x0f, 0xbf, 0x54, 0xc4, 0x42, 0xd3, 0x86, 0x54, 0x40,
-    0x55, 0x40, 0x94, 0x42, 0x85, 0x42, 0x21, 0x2e, 0xd7, 0x00, 0x42, 0x40, 0x25, 0x2e, 0xfd, 0xf3, 0xc0, 0x42, 0x7e,
-    0x82, 0x05, 0x2e, 0x7d, 0x00, 0x80, 0xb2, 0x14, 0x2f, 0x05, 0x2e, 0x89, 0x00, 0x27, 0xbd, 0x2f, 0xb9, 0x80, 0x90,
-    0x02, 0x2f, 0x21, 0x2e, 0x6f, 0xf5, 0x0c, 0x2d, 0x07, 0x2e, 0x71, 0x0f, 0x14, 0x30, 0x1c, 0x09, 0x05, 0x2e, 0x77,
-    0xf7, 0xbd, 0x56, 0x47, 0xbe, 0x93, 0x08, 0x94, 0x0a, 0x25, 0x2e, 0x77, 0xf7, 0xe7, 0x54, 0x50, 0x42, 0x4a, 0x0e,
-    0xfc, 0x2f, 0xb8, 0x2e, 0x50, 0x50, 0x02, 0x30, 0x43, 0x86, 0xe5, 0x50, 0xfb, 0x7f, 0xe3, 0x7f, 0xd2, 0x7f, 0xc0,
-    0x7f, 0xb1, 0x7f, 0x00, 0x2e, 0x41, 0x40, 0x00, 0x40, 0x48, 0x04, 0x98, 0x2e, 0x74, 0xc0, 0x1e, 0xaa, 0xd3, 0x6f,
-    0x14, 0x30, 0xb1, 0x6f, 0xe3, 0x22, 0xc0, 0x6f, 0x52, 0x40, 0xe4, 0x6f, 0x4c, 0x0e, 0x12, 0x42, 0xd3, 0x7f, 0xeb,
-    0x2f, 0x03, 0x2e, 0x86, 0x0f, 0x40, 0x90, 0x11, 0x30, 0x03, 0x2f, 0x23, 0x2e, 0x86, 0x0f, 0x02, 0x2c, 0x00, 0x30,
-    0xd0, 0x6f, 0xfb, 0x6f, 0xb0, 0x5f, 0xb8, 0x2e, 0x40, 0x50, 0xf1, 0x7f, 0x0a, 0x25, 0x3c, 0x86, 0xeb, 0x7f, 0x41,
-    0x33, 0x22, 0x30, 0x98, 0x2e, 0xc2, 0xc4, 0xd3, 0x6f, 0xf4, 0x30, 0xdc, 0x09, 0x47, 0x58, 0xc2, 0x6f, 0x94, 0x09,
-    0xeb, 0x58, 0x6a, 0xbb, 0xdc, 0x08, 0xb4, 0xb9, 0xb1, 0xbd, 0xe9, 0x5a, 0x95, 0x08, 0x21, 0xbd, 0xf6, 0xbf, 0x77,
-    0x0b, 0x51, 0xbe, 0xf1, 0x6f, 0xeb, 0x6f, 0x52, 0x42, 0x54, 0x42, 0xc0, 0x2e, 0x43, 0x42, 0xc0, 0x5f, 0x50, 0x50,
-    0xf5, 0x50, 0x31, 0x30, 0x11, 0x42, 0xfb, 0x7f, 0x7b, 0x30, 0x0b, 0x42, 0x11, 0x30, 0x02, 0x80, 0x23, 0x33, 0x01,
-    0x42, 0x03, 0x00, 0x07, 0x2e, 0x80, 0x03, 0x05, 0x2e, 0xd3, 0x00, 0x23, 0x52, 0xe2, 0x7f, 0xd3, 0x7f, 0xc0, 0x7f,
-    0x98, 0x2e, 0xb6, 0x0e, 0xd1, 0x6f, 0x08, 0x0a, 0x1a, 0x25, 0x7b, 0x86, 0xd0, 0x7f, 0x01, 0x33, 0x12, 0x30, 0x98,
-    0x2e, 0xc2, 0xc4, 0xd1, 0x6f, 0x08, 0x0a, 0x00, 0xb2, 0x0d, 0x2f, 0xe3, 0x6f, 0x01, 0x2e, 0x80, 0x03, 0x51, 0x30,
-    0xc7, 0x86, 0x23, 0x2e, 0x21, 0xf2, 0x08, 0xbc, 0xc0, 0x42, 0x98, 0x2e, 0xa5, 0xb7, 0x00, 0x2e, 0x00, 0x2e, 0xd0,
-    0x2e, 0xb0, 0x6f, 0x0b, 0xb8, 0x03, 0x2e, 0x1b, 0x00, 0x08, 0x1a, 0xb0, 0x7f, 0x70, 0x30, 0x04, 0x2f, 0x21, 0x2e,
-    0x21, 0xf2, 0x00, 0x2e, 0x00, 0x2e, 0xd0, 0x2e, 0x98, 0x2e, 0x6d, 0xc0, 0x98, 0x2e, 0x5d, 0xc0, 0xed, 0x50, 0x98,
-    0x2e, 0x44, 0xcb, 0xef, 0x50, 0x98, 0x2e, 0x46, 0xc3, 0xf1, 0x50, 0x98, 0x2e, 0x53, 0xc7, 0x35, 0x50, 0x98, 0x2e,
-    0x64, 0xcf, 0x10, 0x30, 0x98, 0x2e, 0xdc, 0x03, 0x20, 0x26, 0xc0, 0x6f, 0x02, 0x31, 0x12, 0x42, 0xab, 0x33, 0x0b,
-    0x42, 0x37, 0x80, 0x01, 0x30, 0x01, 0x42, 0xf3, 0x37, 0xf7, 0x52, 0xfb, 0x50, 0x44, 0x40, 0xa2, 0x0a, 0x42, 0x42,
-    0x8b, 0x31, 0x09, 0x2e, 0x5e, 0xf7, 0xf9, 0x54, 0xe3, 0x08, 0x83, 0x42, 0x1b, 0x42, 0x23, 0x33, 0x4b, 0x00, 0xbc,
-    0x84, 0x0b, 0x40, 0x33, 0x30, 0x83, 0x42, 0x0b, 0x42, 0xe0, 0x7f, 0xd1, 0x7f, 0x98, 0x2e, 0x58, 0xb7, 0xd1, 0x6f,
-    0x80, 0x30, 0x40, 0x42, 0x03, 0x30, 0xe0, 0x6f, 0xf3, 0x54, 0x04, 0x30, 0x00, 0x2e, 0x00, 0x2e, 0x01, 0x89, 0x62,
-    0x0e, 0xfa, 0x2f, 0x43, 0x42, 0x11, 0x30, 0xfb, 0x6f, 0xc0, 0x2e, 0x01, 0x42, 0xb0, 0x5f, 0xc1, 0x4a, 0x00, 0x00,
-    0x6d, 0x57, 0x00, 0x00, 0x77, 0x8e, 0x00, 0x00, 0xe0, 0xff, 0xff, 0xff, 0xd3, 0xff, 0xff, 0xff, 0xe5, 0xff, 0xff,
-    0xff, 0xee, 0xe1, 0xff, 0xff, 0x7c, 0x13, 0x00, 0x00, 0x46, 0xe6, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x2e, 0x00, 0xc1, 0x80,
-    0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1,
-    0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00,
-    0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e,
-    0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80,
-    0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1,
-    0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00,
-    0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e,
-    0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80,
-    0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1,
-    0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00,
-    0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e,
-    0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80,
-    0x2e, 0x00, 0xc1
-
-};
-
-}  // namespace esphome::bmi270

esphome/components/bmi270/motion.py

@@ -1,91 +0,0 @@
-import esphome.codegen as cg
-from esphome.components import i2c
-from esphome.components.const import (
-    CONF_ACCELEROMETER_ODR,
-    CONF_ACCELEROMETER_RANGE,
-    CONF_GYROSCOPE_ODR,
-    CONF_GYROSCOPE_RANGE,
-)
-from esphome.components.motion import motion_schema, new_motion_component
-import esphome.config_validation as cv
-
-from . import BMI270Component, bmi270_ns
-
-DEPENDENCIES = ["i2c"]
-
-#  Enum proxies (must match the C++ enum values exactly)
-BMI270AccelRange = bmi270_ns.enum("BMI270AccelRange")
-ACCEL_RANGE_OPTIONS = {
-    "2G": BMI270AccelRange.BMI270_ACCEL_RANGE_2G,
-    "4G": BMI270AccelRange.BMI270_ACCEL_RANGE_4G,
-    "8G": BMI270AccelRange.BMI270_ACCEL_RANGE_8G,
-    "16G": BMI270AccelRange.BMI270_ACCEL_RANGE_16G,
-}
-
-BMI270GyroRange = bmi270_ns.enum("BMI270GyroRange")
-GYRO_RANGE_OPTIONS = {
-    "2000DPS": BMI270GyroRange.BMI270_GYRO_RANGE_2000,
-    "1000DPS": BMI270GyroRange.BMI270_GYRO_RANGE_1000,
-    "500DPS": BMI270GyroRange.BMI270_GYRO_RANGE_500,
-    "250DPS": BMI270GyroRange.BMI270_GYRO_RANGE_250,
-    "125DPS": BMI270GyroRange.BMI270_GYRO_RANGE_125,
-}
-
-BMI270AccelODR = bmi270_ns.enum("BMI270AccelODR")
-ACCEL_ODR_OPTIONS = {
-    "12_5HZ": BMI270AccelODR.BMI270_ACCEL_ODR_12_5,
-    "25HZ": BMI270AccelODR.BMI270_ACCEL_ODR_25,
-    "50HZ": BMI270AccelODR.BMI270_ACCEL_ODR_50,
-    "100HZ": BMI270AccelODR.BMI270_ACCEL_ODR_100,
-    "200HZ": BMI270AccelODR.BMI270_ACCEL_ODR_200,
-    "400HZ": BMI270AccelODR.BMI270_ACCEL_ODR_400,
-    "800HZ": BMI270AccelODR.BMI270_ACCEL_ODR_800,
-    "1600HZ": BMI270AccelODR.BMI270_ACCEL_ODR_1600,
-}
-
-BMI270GyroODR = bmi270_ns.enum("BMI270GyroODR")
-GYRO_ODR_OPTIONS = {
-    "25HZ": BMI270GyroODR.BMI270_GYRO_ODR_25,
-    "50HZ": BMI270GyroODR.BMI270_GYRO_ODR_50,
-    "100HZ": BMI270GyroODR.BMI270_GYRO_ODR_100,
-    "200HZ": BMI270GyroODR.BMI270_GYRO_ODR_200,
-    "400HZ": BMI270GyroODR.BMI270_GYRO_ODR_400,
-    "800HZ": BMI270GyroODR.BMI270_GYRO_ODR_800,
-    "1600HZ": BMI270GyroODR.BMI270_GYRO_ODR_1600,
-    "3200HZ": BMI270GyroODR.BMI270_GYRO_ODR_3200,
-}
-
-#  Top-level CONFIG_SCHEMA
-CONFIG_SCHEMA = (
-    motion_schema(BMI270Component, has_accel=True, has_gyro=True)
-    .extend(
-        {
-            cv.Optional(CONF_ACCELEROMETER_RANGE, default="4G"): cv.enum(
-                ACCEL_RANGE_OPTIONS, upper=True
-            ),
-            cv.Optional(CONF_ACCELEROMETER_ODR, default="100HZ"): cv.enum(
-                ACCEL_ODR_OPTIONS, upper=True
-            ),
-            cv.Optional(CONF_GYROSCOPE_RANGE, default="2000DPS"): cv.enum(
-                GYRO_RANGE_OPTIONS, upper=True
-            ),
-            cv.Optional(CONF_GYROSCOPE_ODR, default="200HZ"): cv.enum(
-                GYRO_ODR_OPTIONS, upper=True
-            ),
-        }
-    )
-    .extend(i2c.i2c_device_schema(0x68))
-)
-
-
-#  Code generation
-async def to_code(config):
-    var = await new_motion_component(config)
-    await i2c.register_i2c_device(var, config)
-
-    # Accelerometer sensors
-    # Hardware configuration
-    cg.add(var.set_accel_range(config[CONF_ACCELEROMETER_RANGE]))
-    cg.add(var.set_accel_odr(config[CONF_ACCELEROMETER_ODR]))
-    cg.add(var.set_gyro_range(config[CONF_GYROSCOPE_RANGE]))
-    cg.add(var.set_gyro_odr(config[CONF_GYROSCOPE_ODR]))

esphome/components/bmi270/sensor.py

@@ -1,41 +0,0 @@
-#  YAML config keys
-import esphome.codegen as cg
-from esphome.components import sensor
-import esphome.config_validation as cv
-from esphome.const import (
-    CONF_TEMPERATURE,
-    CONF_TYPE,
-    DEVICE_CLASS_TEMPERATURE,
-    ICON_THERMOMETER,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_CELSIUS,
-)
-from esphome.cpp_generator import MockObj
-
-from . import CONF_BMI270_ID, BMI270Component
-
-AUTO_LOAD = ["bmi270"]
-
-CONFIG_SCHEMA = sensor.sensor_schema(
-    unit_of_measurement=UNIT_CELSIUS,
-    icon=ICON_THERMOMETER,
-    accuracy_decimals=2,
-    state_class=STATE_CLASS_MEASUREMENT,
-    device_class=DEVICE_CLASS_TEMPERATURE,
-).extend(
-    {
-        cv.Optional(CONF_TYPE): cv.one_of(CONF_TEMPERATURE),
-        cv.GenerateID(CONF_BMI270_ID): cv.use_id(BMI270Component),
-    }
-)
-
-
-async def to_code(config):
-    var = await sensor.new_sensor(config)
-    parent = await cg.get_variable(config[CONF_BMI270_ID])
-    data = MockObj("data")
-    value_lambda = await cg.process_lambda(
-        var.publish_state(data),
-        [(cg.float_, str(data))],
-    )
-    cg.add(parent.add_temperature_listener(value_lambda))

esphome/components/bthome_mithermometer/bthome_ble.cpp

@@ -222,7 +222,6 @@ bool BTHomeMiThermometer::decrypt_bthome_payload_(const std::vector<uint8_t> &da
   }
 
   size_t plaintext_length;
-  // NOLINTNEXTLINE(readability-suspicious-call-argument) - similarly named size args are not swapped
   psa_status_t status = psa_aead_decrypt(key_id, PSA_ALG_AEAD_WITH_SHORTENED_TAG(PSA_ALG_CCM, BTHOME_MIC_SIZE),
                                          nonce.data(), nonce.size(), nullptr, 0, ct_with_tag, ct_with_tag_size,
                                          payload.data(), ciphertext_size, &plaintext_length);

esphome/components/camera_encoder/__init__.py

@@ -50,7 +50,7 @@ async def to_code(config: ConfigType) -> None:
     buffer = cg.new_Pvariable(config[CONF_ENCODER_BUFFER_ID])
     cg.add(buffer.set_buffer_size(config[CONF_BUFFER_SIZE]))
     if config[CONF_TYPE] == ESP32_CAMERA_ENCODER:
-        add_idf_component(name="espressif/esp32-camera", ref="2.1.7")
+        add_idf_component(name="espressif/esp32-camera", ref="2.1.5")
         cg.add_define("USE_ESP32_CAMERA_JPEG_ENCODER")
         var = cg.new_Pvariable(
             config[CONF_ID],

esphome/components/const/__init__.py

@@ -5,8 +5,6 @@ CODEOWNERS = ["@esphome/core"]
 BYTE_ORDER_LITTLE = "little_endian"
 BYTE_ORDER_BIG = "big_endian"
 
-CONF_ACCELEROMETER_ODR = "accelerometer_odr"
-CONF_ACCELEROMETER_RANGE = "accelerometer_range"
 CONF_B_CONSTANT = "b_constant"
 CONF_BYTE_ORDER = "byte_order"
 CONF_CLIMATE_ID = "climate_id"
@@ -15,11 +13,8 @@ CONF_CRC_ENABLE = "crc_enable"
 CONF_DATA_BITS = "data_bits"
 CONF_DRAW_ROUNDING = "draw_rounding"
 CONF_ENABLED = "enabled"
-CONF_GYROSCOPE_ODR = "gyroscope_odr"
-CONF_GYROSCOPE_RANGE = "gyroscope_range"
 CONF_IGNORE_NOT_FOUND = "ignore_not_found"
 CONF_LIBRETINY = "libretiny"
-CONF_LOOP = "loop"
 CONF_ON_PACKET = "on_packet"
 CONF_ON_RECEIVE = "on_receive"
 CONF_ON_STATE_CHANGE = "on_state_change"
@@ -27,7 +22,6 @@ CONF_PARITY = "parity"
 CONF_RECEIVER_FREQUENCY = "receiver_frequency"
 CONF_REQUEST_HEADERS = "request_headers"
 CONF_ROWS = "rows"
-CONF_SHA256 = "sha256"
 CONF_STOP_BITS = "stop_bits"
 CONF_USE_PSRAM = "use_psram"
 CONF_VOLUME_INCREMENT = "volume_increment"

esphome/components/daikin_arc/daikin_arc.cpp

@@ -216,7 +216,7 @@ uint8_t DaikinArcClimate::temperature_() {
       return 0xc0;
     default:
       float new_temp = clamp<float>(this->target_temperature, DAIKIN_TEMP_MIN, DAIKIN_TEMP_MAX);
-      uint8_t temperature = (uint8_t) std::floor(new_temp);
+      uint8_t temperature = (uint8_t) floor(new_temp);
       return temperature << 1 | (new_temp - temperature > 0 ? 0x01 : 0);
   }
 }

esphome/components/dfplayer/__init__.py

@@ -1,7 +1,6 @@
 from esphome import automation
 import esphome.codegen as cg
 from esphome.components import uart
-from esphome.components.const import CONF_LOOP
 import esphome.config_validation as cv
 from esphome.const import CONF_DEVICE, CONF_FILE, CONF_ID, CONF_VOLUME
 
@@ -16,6 +15,7 @@ DFPlayerIsPlayingCondition = dfplayer_ns.class_(
 
 MULTI_CONF = True
 CONF_FOLDER = "folder"
+CONF_LOOP = "loop"
 CONF_EQ_PRESET = "eq_preset"
 CONF_ON_FINISHED_PLAYBACK = "on_finished_playback"
 

esphome/components/display/__init__.py

@@ -3,18 +3,11 @@ from dataclasses import dataclass
 from esphome import automation, core
 from esphome.automation import maybe_simple_id
 import esphome.codegen as cg
-from esphome.components.const import (
-    BYTE_ORDER_BIG,
-    CONF_BYTE_ORDER,
-    CONF_DRAW_ROUNDING,
-    KEY_METADATA,
-)
+from esphome.components.const import KEY_METADATA
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_AUTO_CLEAR_ENABLED,
-    CONF_DIMENSIONS,
     CONF_FROM,
-    CONF_HEIGHT,
     CONF_ID,
     CONF_LAMBDA,
     CONF_PAGE_ID,
@@ -23,11 +16,10 @@ from esphome.const import (
     CONF_TO,
     CONF_TRIGGER_ID,
     CONF_UPDATE_INTERVAL,
-    CONF_WIDTH,
     SCHEDULER_DONT_RUN,
 )
-from esphome.core import CORE, ID, CoroPriority, coroutine_with_priority
-from esphome.final_validate import full_config
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
+from esphome.cpp_generator import MockObj
 
 DOMAIN = "display"
 IS_PLATFORM_COMPONENT = True
@@ -167,97 +159,29 @@ async def setup_display_core_(var, config):
 class DisplayMetaData:
     width: int = 0
     height: int = 0
-    has_hardware_rotation: bool = False
-    byte_order: str = BYTE_ORDER_BIG
     has_writer: bool = False
-    rotation: int = 0
-    draw_rounding: int = 0
-
-
-def _get_metadata_list() -> list[tuple]:
-    """Get the raw metadata list. Each entry is (id, DisplayMetaData)."""
-    return CORE.data.setdefault(DOMAIN, {}).setdefault(KEY_METADATA, [])
+    has_hardware_rotation: bool = False
 
 
 def get_all_display_metadata() -> dict[str, DisplayMetaData]:
-    """Get all display metadata as a dict keyed by resolved ID strings.
-
-    Must not be called before IDs have been finalised.
-    """
-    entries = _get_metadata_list()
-    assert all(id_.id is not None for id_, _ in entries), (
-        "get_all_display_metadata called before display IDs have been resolved"
-    )
-    return {id_.id: meta for id_, meta in entries}
+    """Get all display metadata."""
+    return CORE.data.setdefault(DOMAIN, {}).setdefault(KEY_METADATA, {})
 
 
-def get_display_metadata(display_id: ID) -> DisplayMetaData:
-    """Get display metadata by ID object
-
-    Must not be called before IDs have been finalised.
-    """
-    for id_, meta in _get_metadata_list():
-        if id_ is display_id:
-            return meta
-        assert id_.id is not None, (
-            "get_display_metadata called before display IDs have been resolved"
-        )
-        if id_.id == display_id.id:
-            return meta
-    # No metadata found, display driver may not yet support it.
-    # Read the raw config to populate the returned data
-    global_config = full_config.get()
-    path = global_config.get_path_for_id(display_id)[:-1]
-    disp_config = global_config.get_config_for_path(path)
-    dimensions = disp_config.get(CONF_DIMENSIONS, (0, 0))
-    if isinstance(dimensions, dict):
-        dimensions = (dimensions.get(CONF_WIDTH, 0), dimensions.get(CONF_HEIGHT, 0))
-    elif not isinstance(dimensions, tuple) or len(dimensions) != 2:
-        dimensions = (0, 0)
-
-    meta = DisplayMetaData(
-        width=dimensions[0],
-        height=dimensions[1],
-        has_hardware_rotation=False,
-        byte_order=disp_config.get(CONF_BYTE_ORDER, cv.UNDEFINED),
-        has_writer=disp_config.get(CONF_AUTO_CLEAR_ENABLED) is True
-        or disp_config.get(CONF_PAGES) is not None
-        or disp_config.get(CONF_LAMBDA) is not None
-        or disp_config.get(CONF_SHOW_TEST_CARD) is True,
-        rotation=disp_config.get(CONF_ROTATION, 0),
-        draw_rounding=disp_config.get(CONF_DRAW_ROUNDING, 0),
-    )
-    _get_metadata_list().append((display_id, meta))
-    return meta
+def get_display_metadata(display_id: str) -> DisplayMetaData | None:
+    """Get display metadata by ID for use by other components."""
+    return get_all_display_metadata().get(display_id, DisplayMetaData())
 
 
 def add_metadata(
-    id: ID,
+    id: str | MockObj,
     width: int,
     height: int,
+    has_writer: bool,
     has_hardware_rotation: bool = False,
-    byte_order: str = BYTE_ORDER_BIG,
-    has_writer: bool = False,
-    rotation: int = 0,
-    draw_rounding: int = 0,
 ):
-    entries = _get_metadata_list()
-    assert not any(existing_id is id for existing_id, _ in entries), (
-        f"Duplicate display metadata for ID {id}"
-    )
-    entries.append(
-        (
-            id,
-            DisplayMetaData(
-                width=width,
-                height=height,
-                has_hardware_rotation=has_hardware_rotation,
-                byte_order=byte_order,
-                has_writer=has_writer,
-                rotation=rotation,
-                draw_rounding=draw_rounding,
-            ),
-        )
+    get_all_display_metadata()[str(id)] = DisplayMetaData(
+        width, height, has_writer, has_hardware_rotation
     )
 
 

esphome/components/display/display.cpp

@@ -1,5 +1,4 @@
 #include "display.h"
-#include <cmath>
 #include <utility>
 #include <numbers>
 #include "display_color_utils.h"
@@ -239,7 +238,7 @@ void Display::filled_gauge(int center_x, int center_y, int radius1, int radius2,
       int lhline_width = -(dxmax - dxmin) + 1;
       if (progress >= 50) {
         if (float(dymax) < float(-dxmax) * tan_a) {
-          upd_dxmax = std::ceil(float(dymax) / tan_a);
+          upd_dxmax = ceil(float(dymax) / tan_a);
         } else {
           upd_dxmax = -dxmax;
         }
@@ -254,7 +253,7 @@ void Display::filled_gauge(int center_x, int center_y, int radius1, int radius2,
         }
       } else {
         if (float(dymin) > float(-dxmin) * tan_a) {
-          upd_dxmin = std::ceil(float(dymin) / tan_a);
+          upd_dxmin = ceil(float(dymin) / tan_a);
         } else {
           upd_dxmin = -dxmin;
         }
@@ -269,12 +268,12 @@ void Display::filled_gauge(int center_x, int center_y, int radius1, int radius2,
       int hline_width = 2 * (-dxmax) + 1;
       if (progress >= 50) {
         if (dymax < float(-dxmax) * tan_a) {
-          upd_dxmax = std::ceil(float(dymax) / tan_a);
+          upd_dxmax = ceil(float(dymax) / tan_a);
           hline_width = -dxmax + upd_dxmax + 1;
         }
       } else {
         if (dymax < float(-dxmax) * tan_a) {
-          upd_dxmax = std::ceil(float(dymax) / tan_a);
+          upd_dxmax = ceil(float(dymax) / tan_a);
           hline_width = -dxmax - upd_dxmax + 1;
         } else {
           hline_width = 0;
@@ -453,8 +452,8 @@ void HOT Display::get_regular_polygon_vertex(int vertex_id, int *vertex_x, int *
     rotation_radians -= (variation == VARIATION_FLAT_TOP) ? std::numbers::pi / edges : 0.0;
 
     float vertex_angle = ((float) vertex_id) / edges * 2 * std::numbers::pi + rotation_radians;
-    *vertex_x = (int) std::round(std::cos(vertex_angle) * radius) + center_x;
-    *vertex_y = (int) std::round(std::sin(vertex_angle) * radius) + center_y;
+    *vertex_x = (int) round(cos(vertex_angle) * radius) + center_x;
+    *vertex_y = (int) round(sin(vertex_angle) * radius) + center_y;
   }
 }
 

esphome/components/dlms_meter/__init__.py

@@ -1,258 +1,57 @@
-import logging
-import re
-
 import esphome.codegen as cg
-from esphome.components import esp32, uart
+from esphome.components import uart
 import esphome.config_validation as cv
-from esphome.const import (
-    CONF_ID,
-    CONF_NAME,
-    CONF_PATTERN,
-    CONF_PRIORITY,
-    CONF_RECEIVE_TIMEOUT,
-)
-from esphome.core import CORE
+from esphome.const import CONF_ID, PLATFORM_ESP32, PLATFORM_ESP8266
 
-_LOGGER = logging.getLogger(__name__)
-
-CODEOWNERS = ["@SimonFischer04", "@Tomer27cz", "@latonita", "@PolarGoose"]
+CODEOWNERS = ["@SimonFischer04"]
 DEPENDENCIES = ["uart"]
 
 CONF_DLMS_METER_ID = "dlms_meter_id"
 CONF_DECRYPTION_KEY = "decryption_key"
-CONF_AUTH_KEY = "auth_key"
-CONF_OBIS_CODE = "obis_code"
-CONF_CUSTOM_PATTERNS = "custom_patterns"
-CONF_SKIP_CRC = "skip_crc"
-CONF_DEFAULT_OBIS = "default_obis"
 CONF_PROVIDER = "provider"
 
+PROVIDERS = {"generic": 0, "netznoe": 1}
+
 dlms_meter_component_ns = cg.esphome_ns.namespace("dlms_meter")
 DlmsMeterComponent = dlms_meter_component_ns.class_(
     "DlmsMeterComponent", cg.Component, uart.UARTDevice
 )
 
 
-def obis_code(value):
-    # Normalize the OBIS code to the strict A.B.C.D.E.F format
-    bytes_list = parse_obis_code_bytes(value)
-    return ".".join(str(b) for b in bytes_list)
-
-
-def parse_obis_code_bytes(value):
-    value = cv.string(value)
-    normalized = re.sub(r"[\-\:\*]", ".", value)
-    parts = normalized.split(".")
-    if len(parts) < 5 or len(parts) > 6:
-        raise cv.Invalid("OBIS code must have 5 or 6 parts")
+def validate_key(value):
+    value = cv.string_strict(value)
+    if len(value) != 32:
+        raise cv.Invalid("Decryption key must be 32 hex characters (16 bytes)")
     try:
-        bytes_list = [int(p) for p in parts]
+        return [int(value[i : i + 2], 16) for i in range(0, 32, 2)]
     except ValueError as exc:
-        raise cv.Invalid("OBIS code parts must be integers") from exc
-    for b in bytes_list:
-        if b < 0 or b > 255:
-            raise cv.Invalid("OBIS code parts must be between 0 and 255")
-    if len(bytes_list) == 5:
-        bytes_list.append(255)
-    return bytes_list
+        raise cv.Invalid("Decryption key must be hex values from 00 to FF") from exc
 
 
-def custom_pattern_dict(value):
-    if isinstance(value, str):
-        return {CONF_PATTERN: value}
-    return value
-
-
-def validate_custom_pattern(value):
-    if CONF_DEFAULT_OBIS in value and CONF_NAME not in value:
-        raise cv.Invalid(f"'{CONF_DEFAULT_OBIS}' requires '{CONF_NAME}' to be set")
-    return value
-
-
-def validate_provider_deprecation(config):
-    if CONF_PROVIDER in config:
-        provider = str(config[CONF_PROVIDER]).lower()
-        if provider == "netznoe":
-            _LOGGER.warning(
-                "The 'provider: netznoe' option is deprecated and will be removed in 2026.11.0. "
-                "The required custom patterns have been added automatically for this release, but you must update your configuration.\n"
-                "Please remove the 'provider' key and explicitly replace it with the following:\n\n"
-                "custom_patterns:\n"
-                '  - pattern: "L, TSTR"\n'
-                '    name: "MeterID"\n'
-                '    default_obis: "0.0.96.1.0.255"\n'
-                '  - pattern: "F, TDTM"\n'
-                '    name: "DateTime"\n'
-                '    default_obis: "0.0.1.0.0.255"\n'
-            )
-            patterns = config.get(CONF_CUSTOM_PATTERNS, [])
-
-            # Ensure "L, TSTR" for MeterID is present
-            if not any(p.get(CONF_PATTERN) == "L, TSTR" for p in patterns):
-                patterns.append(
-                    {
-                        CONF_PATTERN: "L, TSTR",
-                        CONF_NAME: "MeterID",
-                        CONF_DEFAULT_OBIS: [0, 0, 96, 1, 0, 255],
-                        CONF_PRIORITY: 0,
-                    }
-                )
-
-            # Ensure "F, TDTM" for DateTime is present
-            if not any(p.get(CONF_PATTERN) == "F, TDTM" for p in patterns):
-                patterns.append(
-                    {
-                        CONF_PATTERN: "F, TDTM",
-                        CONF_NAME: "DateTime",
-                        CONF_DEFAULT_OBIS: [0, 0, 1, 0, 0, 255],
-                        CONF_PRIORITY: 0,
-                    }
-                )
-
-            config[CONF_CUSTOM_PATTERNS] = patterns
-        else:
-            _LOGGER.warning(
-                "The 'provider' option is deprecated and will be removed in 2026.11.0. "
-                "The dlms_parser library now handles quirks dynamically. "
-                "Please remove this option from your configuration."
-            )
-    return config
-
-
-CUSTOM_PATTERN_SCHEMA = cv.All(
-    custom_pattern_dict,
-    cv.Schema(
-        {
-            cv.Required(CONF_PATTERN): cv.string,
-            cv.Optional(CONF_NAME): cv.string,
-            cv.Optional(CONF_PRIORITY, default=0): cv.int_,
-            cv.Optional(CONF_DEFAULT_OBIS): parse_obis_code_bytes,
-        }
-    ),
-    validate_custom_pattern,
-)
-
 CONFIG_SCHEMA = cv.All(
     cv.Schema(
         {
             cv.GenerateID(): cv.declare_id(DlmsMeterComponent),
-            cv.Optional(CONF_DECRYPTION_KEY): lambda value: cv.bind_key(
-                value, name="Decryption key"
+            cv.Required(CONF_DECRYPTION_KEY): validate_key,
+            cv.Optional(CONF_PROVIDER, default="generic"): cv.enum(
+                PROVIDERS, lower=True
             ),
-            cv.Optional(CONF_AUTH_KEY): lambda value: cv.bind_key(
-                value, name="Authentication key"
-            ),
-            cv.Optional(CONF_CUSTOM_PATTERNS): cv.ensure_list(CUSTOM_PATTERN_SCHEMA),
-            cv.Optional(CONF_SKIP_CRC, default=False): cv.boolean,
-            cv.Optional(CONF_PROVIDER): cv.string,
-            cv.Optional(
-                CONF_RECEIVE_TIMEOUT, default="1000ms"
-            ): cv.positive_time_period_milliseconds,
         }
     )
     .extend(uart.UART_DEVICE_SCHEMA)
     .extend(cv.COMPONENT_SCHEMA),
-    validate_provider_deprecation,
+    cv.only_on([PLATFORM_ESP8266, PLATFORM_ESP32]),
 )
 
-FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema("dlms_meter", require_rx=True)
+FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
+    "dlms_meter", baud_rate=2400, require_rx=True
+)
 
 
 async def to_code(config):
-    dec_key_expr = cg.RawExpression("std::nullopt")
-    if dec_key := config.get(CONF_DECRYPTION_KEY):
-        key_bytes = [str(int(dec_key[i : i + 2], 16)) for i in range(0, 32, 2)]
-        dec_key_expr = cg.RawExpression(
-            f"std::array<uint8_t, 16>{{{', '.join(key_bytes)}}}"
-        )
-
-    auth_key_expr = cg.RawExpression("std::nullopt")
-    if auth_key := config.get(CONF_AUTH_KEY):
-        key_bytes = [str(int(auth_key[i : i + 2], 16)) for i in range(0, 32, 2)]
-        auth_key_expr = cg.RawExpression(
-            f"std::array<uint8_t, 16>{{{', '.join(key_bytes)}}}"
-        )
-
-    patterns = []
-    if custom_patterns := config.get(CONF_CUSTOM_PATTERNS):
-        for p in custom_patterns:
-            name_expr = cg.RawExpression("std::nullopt")
-            if name_val := p.get(CONF_NAME):
-                name_expr = name_val
-
-            if obis_vals := p.get(CONF_DEFAULT_OBIS):
-                obis_expr = cg.RawExpression(
-                    f"std::array<uint8_t, 6>{{{obis_vals[0]}, {obis_vals[1]}, {obis_vals[2]}, {obis_vals[3]}, {obis_vals[4]}, {obis_vals[5]}}}"
-                )
-            else:
-                obis_expr = cg.RawExpression("std::nullopt")
-
-            patterns.append(
-                cg.ArrayInitializer(
-                    p[CONF_PATTERN],
-                    name_expr,
-                    p.get(CONF_PRIORITY, 0),
-                    obis_expr,
-                )
-            )
-
-    patterns_expr = (
-        cg.ArrayInitializer(*patterns) if patterns else cg.RawExpression("{}")
-    )
-
-    var = cg.new_Pvariable(
-        config[CONF_ID],
-        config[CONF_RECEIVE_TIMEOUT],
-        config[CONF_SKIP_CRC],
-        dec_key_expr,
-        auth_key_expr,
-        patterns_expr,
-    )
-
-    hub_id = config[CONF_ID].id
-
-    sensor_count = 0
-    for sens_conf in CORE.config.get("sensor", []):
-        if (
-            sens_conf.get("platform") == "dlms_meter"
-            and sens_conf.get(CONF_DLMS_METER_ID).id == hub_id
-        ):
-            if CONF_OBIS_CODE in sens_conf:
-                sensor_count += 1
-            else:
-                from .sensor import NUMERIC_KEYS
-
-                sensor_count += sum(1 for key in NUMERIC_KEYS if key in sens_conf)
-
-    text_sensor_count = 0
-    for sens_conf in CORE.config.get("text_sensor", []):
-        if (
-            sens_conf.get("platform") == "dlms_meter"
-            and sens_conf.get(CONF_DLMS_METER_ID).id == hub_id
-        ):
-            if CONF_OBIS_CODE in sens_conf:
-                text_sensor_count += 1
-            else:
-                from .text_sensor import TEXT_KEYS
-
-                text_sensor_count += sum(1 for key in TEXT_KEYS if key in sens_conf)
-
-    binary_sensor_count = 0
-    for sens_conf in CORE.config.get("binary_sensor", []):
-        if (
-            sens_conf.get("platform") == "dlms_meter"
-            and sens_conf.get(CONF_DLMS_METER_ID).id == hub_id
-        ):
-            binary_sensor_count += 1
-
-    cg.add_define("DLMS_MAX_SENSORS", sensor_count)
-    cg.add_define("DLMS_MAX_TEXT_SENSORS", text_sensor_count)
-    cg.add_define("DLMS_MAX_BINARY_SENSORS", binary_sensor_count)
-
+    var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)
     await uart.register_uart_device(var, config)
-
-    if CORE.is_esp32:
-        esp32.add_idf_component(name="esphome/dlms_parser", ref="1.1.0")
-    else:
-        cg.add_library("esphome/dlms_parser", "1.1.0")
+    key = ", ".join(str(b) for b in config[CONF_DECRYPTION_KEY])
+    cg.add(var.set_decryption_key(cg.RawExpression(f"{{{key}}}")))
+    cg.add(var.set_provider(PROVIDERS[config[CONF_PROVIDER]]))

esphome/components/dlms_meter/binary_sensor/__init__.py

@@ -1,20 +0,0 @@
-import esphome.codegen as cg
-from esphome.components import binary_sensor
-import esphome.config_validation as cv
-
-from .. import CONF_DLMS_METER_ID, CONF_OBIS_CODE, DlmsMeterComponent, obis_code
-
-DEPENDENCIES = ["dlms_meter"]
-
-CONFIG_SCHEMA = binary_sensor.binary_sensor_schema().extend(
-    {
-        cv.GenerateID(CONF_DLMS_METER_ID): cv.use_id(DlmsMeterComponent),
-        cv.Required(CONF_OBIS_CODE): obis_code,
-    }
-)
-
-
-async def to_code(config):
-    hub = await cg.get_variable(config[CONF_DLMS_METER_ID])
-    var = await binary_sensor.new_binary_sensor(config)
-    cg.add(hub.register_binary_sensor(config[CONF_OBIS_CODE], var))

esphome/components/dlms_meter/dlms.h

@@ -0,0 +1,71 @@
+#pragma once
+
+#include <cstdint>
+
+namespace esphome::dlms_meter {
+
+/*
++-------------------------------+
+|       Ciphering Service       |
++-------------------------------+
+|      System Title Length      |
++-------------------------------+
+|                               |
+|                               |
+|                               |
+|            System             |
+|            Title              |
+|                               |
+|                               |
+|                               |
++-------------------------------+
+|            Length             | (1 or 3 Bytes)
++-------------------------------+
+|     Security Control Byte     |
++-------------------------------+
+|                               |
+|             Frame             |
+|            Counter            |
+|                               |
++-------------------------------+
+|                               |
+~                               ~
+        Encrypted Payload
+~                               ~
+|                               |
++-------------------------------+
+
+Ciphering Service: 0xDB (General-Glo-Ciphering)
+System Title Length: 0x08
+System Title: Unique ID of meter
+Length: 1 Byte=Length <= 127, 3 Bytes=Length > 127 (0x82 & 2 Bytes length)
+Security Control Byte:
+- Bit 3…0: Security_Suite_Id
+- Bit 4: "A" subfield: indicates that authentication is applied
+- Bit 5: "E" subfield: indicates that encryption is applied
+- Bit 6: Key_Set subfield: 0 = Unicast, 1 = Broadcast
+- Bit 7: Indicates the use of compression.
+ */
+
+static constexpr uint8_t DLMS_HEADER_LENGTH = 16;
+static constexpr uint8_t DLMS_HEADER_EXT_OFFSET = 2;  // Extra offset for extended length header
+static constexpr uint8_t DLMS_CIPHER_OFFSET = 0;
+static constexpr uint8_t DLMS_SYST_OFFSET = 1;
+static constexpr uint8_t DLMS_LENGTH_OFFSET = 10;
+static constexpr uint8_t TWO_BYTE_LENGTH = 0x82;
+static constexpr uint8_t DLMS_LENGTH_CORRECTION = 5;  // Header bytes included in length field
+static constexpr uint8_t DLMS_SECBYTE_OFFSET = 11;
+static constexpr uint8_t DLMS_FRAMECOUNTER_OFFSET = 12;
+static constexpr uint8_t DLMS_FRAMECOUNTER_LENGTH = 4;
+static constexpr uint8_t DLMS_PAYLOAD_OFFSET = 16;
+static constexpr uint8_t GLO_CIPHERING = 0xDB;
+static constexpr uint8_t DATA_NOTIFICATION = 0x0F;
+static constexpr uint8_t TIMESTAMP_DATETIME = 0x0C;
+static constexpr uint16_t MAX_MESSAGE_LENGTH = 512;  // Maximum size of message (when having 2 bytes length in header).
+
+// Provider specific quirks
+static constexpr uint8_t NETZ_NOE_MAGIC_BYTE = 0x81;  // Magic length byte used by Netz NOE
+static constexpr uint8_t NETZ_NOE_EXPECTED_MESSAGE_LENGTH = 0xF8;
+static constexpr uint8_t NETZ_NOE_EXPECTED_SECURITY_CONTROL_BYTE = 0x20;
+
+}  // namespace esphome::dlms_meter

esphome/components/dlms_meter/dlms_meter.cpp

@@ -1,236 +1,516 @@
 #include "dlms_meter.h"
-#include "esphome/core/log.h"
 
-#include <cstdio>
+#include <cinttypes>
+
+#if defined(USE_ESP8266_FRAMEWORK_ARDUINO)
+#include <bearssl/bearssl.h>
+#elif defined(USE_ESP32)
+#include <esp_idf_version.h>
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(6, 0, 0)
+#include <psa/crypto.h>
+#else
+#include "mbedtls/esp_config.h"
+#include "mbedtls/gcm.h"
+#endif
+#endif
 
 namespace esphome::dlms_meter {
 
-static const char *const TAG = "dlms_meter";
-static void log_callback(dlms_parser::LogLevel level, const char *fmt, va_list args) {
-  std::array<char, 256> buf;
-  vsnprintf(buf.data(), buf.size(), fmt, args);
-  switch (level) {
-    case dlms_parser::LogLevel::ERROR:
-      ESP_LOGE(TAG, "%s", buf.data());
-      break;
-    case dlms_parser::LogLevel::WARNING:
-      ESP_LOGW(TAG, "%s", buf.data());
-      break;
-    case dlms_parser::LogLevel::INFO:
-      ESP_LOGI(TAG, "%s", buf.data());
-      break;
-    case dlms_parser::LogLevel::VERBOSE:
-      ESP_LOGV(TAG, "%s", buf.data());
-      break;
-    case dlms_parser::LogLevel::VERY_VERBOSE:
-      ESP_LOGVV(TAG, "%s", buf.data());
-      break;
-    case dlms_parser::LogLevel::DEBUG:
-      ESP_LOGD(TAG, "%s", buf.data());
-      break;
-  }
-}
-
-DlmsMeterComponent::DlmsMeterComponent(uint32_t receive_timeout_ms, bool skip_crc_check,
-                                       std::optional<std::array<uint8_t, 16>> decryption_key,
-                                       std::optional<std::array<uint8_t, 16>> authentication_key,
-                                       std::vector<CustomPattern> custom_patterns)
-    : receive_timeout_ms_(receive_timeout_ms),
-      skip_crc_check_(skip_crc_check),
-      custom_patterns_(std::move(custom_patterns)),
-      parser_(&decryptor_) {
-  dlms_parser::Logger::set_log_function(log_callback);
-
-  if (decryption_key.has_value()) {
-#ifdef DLMS_METER_NO_CRYPTO
-    ESP_LOGE(TAG, "Decryption is not supported on this platform (no compatible crypto library found)");
-#else
-    auto opt_key = dlms_parser::Aes128GcmDecryptionKey::from_bytes(decryption_key.value());
-    if (opt_key) {
-      this->parser_.set_decryption_key(*opt_key);
-    } else {
-      ESP_LOGE(TAG, "Failed to set decryption key: invalid key format");
-    }
-#endif
-  }
-
-  if (authentication_key.has_value()) {
-#ifdef DLMS_METER_NO_CRYPTO
-    ESP_LOGE(TAG, "Authentication is not supported on this platform (no compatible crypto library found)");
-#else
-    auto opt_key = dlms_parser::Aes128GcmAuthenticationKey::from_bytes(authentication_key.value());
-    if (opt_key) {
-      this->parser_.set_authentication_key(*opt_key);
-    } else {
-      ESP_LOGE(TAG, "Failed to set authentication key: invalid key format");
-    }
-#endif
-  }
-
-  this->parser_.set_skip_crc_check(this->skip_crc_check_);
-
-  this->parser_.load_default_patterns();
-  for (const auto &pattern : this->custom_patterns_) {
-    if (pattern.default_obis.has_value() && pattern.name.has_value()) {
-      this->parser_.register_pattern(pattern.name->c_str(), pattern.pattern.c_str(), pattern.priority,
-                                     pattern.default_obis.value());
-    } else if (pattern.name.has_value()) {
-      this->parser_.register_pattern(pattern.name->c_str(), pattern.pattern.c_str(), pattern.priority);
-    } else {
-      this->parser_.register_pattern(pattern.pattern.c_str());
-    }
-  }
-}
-
-void DlmsMeterComponent::setup() { this->flush_rx_buffer_(); }
+static constexpr const char *TAG = "dlms_meter";
 
 void DlmsMeterComponent::dump_config() {
-  ESP_LOGCONFIG(TAG, "DLMS Meter:");
-  ESP_LOGCONFIG(TAG, "  Receive Timeout: %u ms", this->receive_timeout_ms_);
-  ESP_LOGCONFIG(TAG, "  Skip CRC Check: %s", YESNO(this->skip_crc_check_));
-
-  for (const auto &pattern : this->custom_patterns_) {
-    if (pattern.default_obis.has_value() && pattern.name.has_value()) {
-      const auto &obis = pattern.default_obis.value();
-      ESP_LOGCONFIG(TAG, "  Custom Pattern: '%s' (name: %s, priority: %d, default_obis: %d.%d.%d.%d.%d.%d)",
-                    pattern.pattern.c_str(), pattern.name->c_str(), pattern.priority, obis[0], obis[1], obis[2],
-                    obis[3], obis[4], obis[5]);
-    } else if (pattern.name.has_value()) {
-      ESP_LOGCONFIG(TAG, "  Custom Pattern: '%s' (name: %s, priority: %d)", pattern.pattern.c_str(),
-                    pattern.name->c_str(), pattern.priority);
-    } else {
-      ESP_LOGCONFIG(TAG, "  Custom Pattern: '%s'", pattern.pattern.c_str());
-    }
-  }
-
-#ifdef USE_SENSOR
-  for (const auto &entry : this->sensors_) {
-    LOG_SENSOR("  ", "Numeric Sensor (OBIS)", entry.sensor);
-    ESP_LOGCONFIG(TAG, "    OBIS: %s", entry.obis_code.c_str());
-  }
-#endif
-#ifdef USE_TEXT_SENSOR
-  for (const auto &entry : this->text_sensors_) {
-    LOG_TEXT_SENSOR("  ", "Text Sensor (OBIS)", entry.sensor);
-    ESP_LOGCONFIG(TAG, "    OBIS: %s", entry.obis_code.c_str());
-  }
-#endif
-#ifdef USE_BINARY_SENSOR
-  for (const auto &entry : this->binary_sensors_) {
-    LOG_BINARY_SENSOR("  ", "Binary Sensor (OBIS)", entry.sensor);
-    ESP_LOGCONFIG(TAG, "    OBIS: %s", entry.obis_code.c_str());
-  }
-#endif
+  const char *provider_name = this->provider_ == PROVIDER_NETZNOE ? "Netz NOE" : "Generic";
+  ESP_LOGCONFIG(TAG,
+                "DLMS Meter:\n"
+                "  Provider: %s\n"
+                "  Read Timeout: %" PRIu32 " ms",
+                provider_name, this->read_timeout_);
+#define DLMS_METER_LOG_SENSOR(s) LOG_SENSOR("  ", #s, this->s##_sensor_);
+  DLMS_METER_SENSOR_LIST(DLMS_METER_LOG_SENSOR, )
+#define DLMS_METER_LOG_TEXT_SENSOR(s) LOG_TEXT_SENSOR("  ", #s, this->s##_text_sensor_);
+  DLMS_METER_TEXT_SENSOR_LIST(DLMS_METER_LOG_TEXT_SENSOR, )
 }
 
 void DlmsMeterComponent::loop() {
-  this->read_rx_buffer_();
-  if (this->bytes_accumulated_ > 0 &&
-      App.get_loop_component_start_time() - this->last_rx_char_time_ > this->receive_timeout_ms_) {
-    this->process_frame_();
-  }
-}
-
-void DlmsMeterComponent::flush_rx_buffer_() {
-  while (this->available()) {
-    this->read();
-  }
-}
-
-void DlmsMeterComponent::read_rx_buffer_() {
-  int available = this->available();
-  if (available == 0)
-    return;
-
-  if (this->bytes_accumulated_ + available > this->rx_buffer_.size()) {
-    ESP_LOGW(TAG, "RX Buffer overflow. Frame too large! Dropping frame.");
-    this->bytes_accumulated_ = 0;
-
-    this->flush_rx_buffer_();
-    return;
-  }
-
-  bool success = this->read_array(this->rx_buffer_.data() + this->bytes_accumulated_, available);
-  if (!success) {
-    ESP_LOGW(TAG, "UART read failed. Dropping frame.");
-    this->bytes_accumulated_ = 0;
-    this->flush_rx_buffer_();
-    return;
-  }
-
-  this->bytes_accumulated_ += available;
-
-  this->last_rx_char_time_ = App.get_loop_component_start_time();
-}
-
-void DlmsMeterComponent::process_frame_() {
-  ESP_LOGV(TAG, "Processing frame of size: %zu bytes", this->bytes_accumulated_);
-
-  auto callback = [this](const char *obis_code, float float_val, const char *str_val, bool is_numeric) {
-    this->on_data_(obis_code, float_val, str_val, is_numeric);
-  };
-
-  this->parser_.parse({this->rx_buffer_.data(), this->bytes_accumulated_}, callback);
-
-  this->bytes_accumulated_ = 0;
-}
-
-void DlmsMeterComponent::on_data_(const char *obis_code, float float_val, const char *str_val, bool is_numeric) {
-  int updated_count = 0;
-
-#ifdef USE_SENSOR
-  if (is_numeric) {
-    for (auto &item : this->sensors_) {
-      if (item.obis_code == obis_code) {
-        item.sensor->publish_state(float_val);
-        updated_count++;
+  // Read while data is available, netznoe uses two frames so allow 2x max frame length
+  size_t avail = this->available();
+  if (avail > 0) {
+    size_t remaining = MBUS_MAX_FRAME_LENGTH * 2 - this->receive_buffer_.size();
+    if (remaining == 0) {
+      ESP_LOGW(TAG, "Receive buffer full, dropping remaining bytes");
+    } else {
+      // Read all available bytes in batches to reduce UART call overhead.
+      // Cap reads to remaining buffer capacity.
+      if (avail > remaining) {
+        avail = remaining;
+      }
+      uint8_t buf[64];
+      while (avail > 0) {
+        size_t to_read = std::min(avail, sizeof(buf));
+        if (!this->read_array(buf, to_read)) {
+          break;
+        }
+        avail -= to_read;
+        this->receive_buffer_.insert(this->receive_buffer_.end(), buf, buf + to_read);
+        this->last_read_ = millis();
       }
     }
   }
+
+  if (!this->receive_buffer_.empty() && millis() - this->last_read_ > this->read_timeout_) {
+    this->mbus_payload_.clear();
+    if (!this->parse_mbus_(this->mbus_payload_))
+      return;
+
+    uint16_t message_length;
+    uint8_t systitle_length;
+    uint16_t header_offset;
+    if (!this->parse_dlms_(this->mbus_payload_, message_length, systitle_length, header_offset))
+      return;
+
+    if (message_length < DECODER_START_OFFSET || message_length > MAX_MESSAGE_LENGTH) {
+      ESP_LOGE(TAG, "DLMS: Message length invalid: %u", message_length);
+      this->receive_buffer_.clear();
+      return;
+    }
+
+    // Decrypt in place and then decode the OBIS codes
+    if (!this->decrypt_(this->mbus_payload_, message_length, systitle_length, header_offset))
+      return;
+    this->decode_obis_(&this->mbus_payload_[header_offset + DLMS_PAYLOAD_OFFSET], message_length);
+  }
+}
+
+bool DlmsMeterComponent::parse_mbus_(std::vector<uint8_t> &mbus_payload) {
+  ESP_LOGV(TAG, "Parsing M-Bus frames");
+  uint16_t frame_offset = 0;  // Offset is used if the M-Bus message is split into multiple frames
+
+  while (frame_offset < this->receive_buffer_.size()) {
+    // Ensure enough bytes remain for the minimal intro header before accessing indices
+    if (this->receive_buffer_.size() - frame_offset < MBUS_HEADER_INTRO_LENGTH) {
+      ESP_LOGE(TAG, "MBUS: Not enough data for frame header (need %d, have %d)", MBUS_HEADER_INTRO_LENGTH,
+               (this->receive_buffer_.size() - frame_offset));
+      this->receive_buffer_.clear();
+      return false;
+    }
+
+    // Check start bytes
+    if (this->receive_buffer_[frame_offset + MBUS_START1_OFFSET] != START_BYTE_LONG_FRAME ||
+        this->receive_buffer_[frame_offset + MBUS_START2_OFFSET] != START_BYTE_LONG_FRAME) {
+      ESP_LOGE(TAG, "MBUS: Start bytes do not match");
+      this->receive_buffer_.clear();
+      return false;
+    }
+
+    // Both length bytes must be identical
+    if (this->receive_buffer_[frame_offset + MBUS_LENGTH1_OFFSET] !=
+        this->receive_buffer_[frame_offset + MBUS_LENGTH2_OFFSET]) {
+      ESP_LOGE(TAG, "MBUS: Length bytes do not match");
+      this->receive_buffer_.clear();
+      return false;
+    }
+
+    uint8_t frame_length = this->receive_buffer_[frame_offset + MBUS_LENGTH1_OFFSET];  // Get length of this frame
+
+    // Check if received data is enough for the given frame length
+    if (this->receive_buffer_.size() - frame_offset <
+        frame_length + 3) {  // length field inside packet does not account for second start- + checksum- + stop- byte
+      ESP_LOGE(TAG, "MBUS: Frame too big for received data");
+      this->receive_buffer_.clear();
+      return false;
+    }
+
+    // Ensure we have full frame (header + payload + checksum + stop byte) before accessing stop byte
+    size_t required_total =
+        frame_length + MBUS_HEADER_INTRO_LENGTH + MBUS_FOOTER_LENGTH;  // payload + header + 2 footer bytes
+    if (this->receive_buffer_.size() - frame_offset < required_total) {
+      ESP_LOGE(TAG, "MBUS: Incomplete frame (need %d, have %d)", (unsigned int) required_total,
+               this->receive_buffer_.size() - frame_offset);
+      this->receive_buffer_.clear();
+      return false;
+    }
+
+    if (this->receive_buffer_[frame_offset + frame_length + MBUS_HEADER_INTRO_LENGTH + MBUS_FOOTER_LENGTH - 1] !=
+        STOP_BYTE) {
+      ESP_LOGE(TAG, "MBUS: Invalid stop byte");
+      this->receive_buffer_.clear();
+      return false;
+    }
+
+    // Verify checksum: sum of all bytes starting at MBUS_HEADER_INTRO_LENGTH, take last byte
+    uint8_t checksum = 0;  // use uint8_t so only the 8 least significant bits are stored
+    for (uint16_t i = 0; i < frame_length; i++) {
+      checksum += this->receive_buffer_[frame_offset + MBUS_HEADER_INTRO_LENGTH + i];
+    }
+    if (checksum != this->receive_buffer_[frame_offset + frame_length + MBUS_HEADER_INTRO_LENGTH]) {
+      ESP_LOGE(TAG, "MBUS: Invalid checksum: %x != %x", checksum,
+               this->receive_buffer_[frame_offset + frame_length + MBUS_HEADER_INTRO_LENGTH]);
+      this->receive_buffer_.clear();
+      return false;
+    }
+
+    mbus_payload.insert(mbus_payload.end(), &this->receive_buffer_[frame_offset + MBUS_FULL_HEADER_LENGTH],
+                        &this->receive_buffer_[frame_offset + MBUS_HEADER_INTRO_LENGTH + frame_length]);
+
+    frame_offset += MBUS_HEADER_INTRO_LENGTH + frame_length + MBUS_FOOTER_LENGTH;
+  }
+  return true;
+}
+
+bool DlmsMeterComponent::parse_dlms_(const std::vector<uint8_t> &mbus_payload, uint16_t &message_length,
+                                     uint8_t &systitle_length, uint16_t &header_offset) {
+  ESP_LOGV(TAG, "Parsing DLMS header");
+  if (mbus_payload.size() < DLMS_HEADER_LENGTH + DLMS_HEADER_EXT_OFFSET) {
+    ESP_LOGE(TAG, "DLMS: Payload too short");
+    this->receive_buffer_.clear();
+    return false;
+  }
+
+  if (mbus_payload[DLMS_CIPHER_OFFSET] != GLO_CIPHERING) {  // Only general-glo-ciphering is supported (0xDB)
+    ESP_LOGE(TAG, "DLMS: Unsupported cipher");
+    this->receive_buffer_.clear();
+    return false;
+  }
+
+  systitle_length = mbus_payload[DLMS_SYST_OFFSET];
+
+  if (systitle_length != 0x08) {  // Only system titles with length of 8 are supported
+    ESP_LOGE(TAG, "DLMS: Unsupported system title length");
+    this->receive_buffer_.clear();
+    return false;
+  }
+
+  message_length = mbus_payload[DLMS_LENGTH_OFFSET];
+  header_offset = 0;
+
+  if (this->provider_ == PROVIDER_NETZNOE) {
+    // for some reason EVN seems to set the standard "length" field to 0x81 and then the actual length is in the next
+    // byte. Check some bytes to see if received data still matches expectation
+    if (message_length == NETZ_NOE_MAGIC_BYTE &&
+        mbus_payload[DLMS_LENGTH_OFFSET + 1] == NETZ_NOE_EXPECTED_MESSAGE_LENGTH &&
+        mbus_payload[DLMS_LENGTH_OFFSET + 2] == NETZ_NOE_EXPECTED_SECURITY_CONTROL_BYTE) {
+      message_length = mbus_payload[DLMS_LENGTH_OFFSET + 1];
+      header_offset = 1;
+    } else {
+      ESP_LOGE(TAG, "Wrong Length - Security Control Byte sequence detected for provider EVN");
+    }
+  } else {
+    if (message_length == TWO_BYTE_LENGTH) {
+      message_length = encode_uint16(mbus_payload[DLMS_LENGTH_OFFSET + 1], mbus_payload[DLMS_LENGTH_OFFSET + 2]);
+      header_offset = DLMS_HEADER_EXT_OFFSET;
+    }
+  }
+  if (message_length < DLMS_LENGTH_CORRECTION) {
+    ESP_LOGE(TAG, "DLMS: Message length too short: %u", message_length);
+    this->receive_buffer_.clear();
+    return false;
+  }
+  message_length -= DLMS_LENGTH_CORRECTION;  // Correct message length due to part of header being included in length
+
+  if (mbus_payload.size() - DLMS_HEADER_LENGTH - header_offset != message_length) {
+    ESP_LOGV(TAG, "DLMS: Length mismatch - payload=%d, header=%d, offset=%d, message=%d", mbus_payload.size(),
+             DLMS_HEADER_LENGTH, header_offset, message_length);
+    ESP_LOGE(TAG, "DLMS: Message has invalid length");
+    this->receive_buffer_.clear();
+    return false;
+  }
+
+  if (mbus_payload[header_offset + DLMS_SECBYTE_OFFSET] != 0x21 &&
+      mbus_payload[header_offset + DLMS_SECBYTE_OFFSET] !=
+          0x20) {  // Only certain security suite is supported (0x21 || 0x20)
+    ESP_LOGE(TAG, "DLMS: Unsupported security control byte");
+    this->receive_buffer_.clear();
+    return false;
+  }
+
+  return true;
+}
+
+bool DlmsMeterComponent::decrypt_(std::vector<uint8_t> &mbus_payload, uint16_t message_length, uint8_t systitle_length,
+                                  uint16_t header_offset) {
+  ESP_LOGV(TAG, "Decrypting payload");
+  uint8_t iv[12];  // Reserve space for the IV, always 12 bytes
+  // Copy system title to IV (System title is before length; no header offset needed!)
+  // Add 1 to the offset in order to skip the system title length byte
+  memcpy(&iv[0], &mbus_payload[DLMS_SYST_OFFSET + 1], systitle_length);
+  memcpy(&iv[8], &mbus_payload[header_offset + DLMS_FRAMECOUNTER_OFFSET],
+         DLMS_FRAMECOUNTER_LENGTH);  // Copy frame counter to IV
+
+  uint8_t *payload_ptr = &mbus_payload[header_offset + DLMS_PAYLOAD_OFFSET];
+
+#if defined(USE_ESP8266_FRAMEWORK_ARDUINO)
+  br_gcm_context gcm_ctx;
+  br_aes_ct_ctr_keys bc;
+  br_aes_ct_ctr_init(&bc, this->decryption_key_.data(), this->decryption_key_.size());
+  br_gcm_init(&gcm_ctx, &bc.vtable, br_ghash_ctmul32);
+  br_gcm_reset(&gcm_ctx, iv, sizeof(iv));
+  br_gcm_flip(&gcm_ctx);
+  br_gcm_run(&gcm_ctx, 0, payload_ptr, message_length);
+#elif defined(USE_ESP32)
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(6, 0, 0)
+  // PSA Crypto multipart AEAD (no tag verification, matching legacy behavior)
+  psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT;
+  psa_set_key_type(&attributes, PSA_KEY_TYPE_AES);
+  psa_set_key_bits(&attributes, this->decryption_key_.size() * 8);
+  psa_set_key_usage_flags(&attributes, PSA_KEY_USAGE_DECRYPT);
+  psa_set_key_algorithm(&attributes, PSA_ALG_GCM);
+
+  mbedtls_svc_key_id_t key_id;
+  bool decrypt_failed = true;
+  if (psa_import_key(&attributes, this->decryption_key_.data(), this->decryption_key_.size(), &key_id) == PSA_SUCCESS) {
+    psa_aead_operation_t op = PSA_AEAD_OPERATION_INIT;
+    if (psa_aead_decrypt_setup(&op, key_id, PSA_ALG_GCM) == PSA_SUCCESS &&
+        psa_aead_set_nonce(&op, iv, sizeof(iv)) == PSA_SUCCESS) {
+      size_t outlen = 0;
+      if (psa_aead_update(&op, payload_ptr, message_length, payload_ptr, message_length, &outlen) == PSA_SUCCESS &&
+          outlen == message_length) {
+        decrypt_failed = false;
+      }
+    }
+    psa_aead_abort(&op);
+    psa_destroy_key(key_id);
+  }
+  if (decrypt_failed) {
+    ESP_LOGE(TAG, "Decryption failed");
+    this->receive_buffer_.clear();
+    return false;
+  }
+#else
+  size_t outlen = 0;
+  mbedtls_gcm_context gcm_ctx;
+  mbedtls_gcm_init(&gcm_ctx);
+  mbedtls_gcm_setkey(&gcm_ctx, MBEDTLS_CIPHER_ID_AES, this->decryption_key_.data(), this->decryption_key_.size() * 8);
+  mbedtls_gcm_starts(&gcm_ctx, MBEDTLS_GCM_DECRYPT, iv, sizeof(iv));
+  auto ret = mbedtls_gcm_update(&gcm_ctx, payload_ptr, message_length, payload_ptr, message_length, &outlen);
+  mbedtls_gcm_free(&gcm_ctx);
+  if (ret != 0) {
+    ESP_LOGE(TAG, "Decryption failed with error: %d", ret);
+    this->receive_buffer_.clear();
+    return false;
+  }
+#endif
+#else
+#error "Invalid Platform"
 #endif
 
-#ifdef USE_TEXT_SENSOR
-  if (!is_numeric && str_val != nullptr) {
-    for (auto &item : this->text_sensors_) {
-      if (item.obis_code == obis_code) {
-        item.sensor->publish_state(str_val);
-        updated_count++;
+  if (payload_ptr[0] != DATA_NOTIFICATION || payload_ptr[5] != TIMESTAMP_DATETIME) {
+    ESP_LOGE(TAG, "OBIS: Packet was decrypted but data is invalid");
+    this->receive_buffer_.clear();
+    return false;
+  }
+  ESP_LOGV(TAG, "Decrypted payload: %d bytes", message_length);
+  return true;
+}
+
+void DlmsMeterComponent::decode_obis_(uint8_t *plaintext, uint16_t message_length) {
+  ESP_LOGV(TAG, "Decoding payload");
+  MeterData data{};
+  uint16_t current_position = DECODER_START_OFFSET;
+  bool power_factor_found = false;
+
+  while (current_position + OBIS_CODE_OFFSET <= message_length) {
+    if (plaintext[current_position + OBIS_TYPE_OFFSET] != DataType::OCTET_STRING) {
+      ESP_LOGE(TAG, "OBIS: Unsupported OBIS header type: %x", plaintext[current_position + OBIS_TYPE_OFFSET]);
+      this->receive_buffer_.clear();
+      return;
+    }
+
+    uint8_t obis_code_length = plaintext[current_position + OBIS_LENGTH_OFFSET];
+    if (obis_code_length != OBIS_CODE_LENGTH_STANDARD && obis_code_length != OBIS_CODE_LENGTH_EXTENDED) {
+      ESP_LOGE(TAG, "OBIS: Unsupported OBIS header length: %x", obis_code_length);
+      this->receive_buffer_.clear();
+      return;
+    }
+    if (current_position + OBIS_CODE_OFFSET + obis_code_length > message_length) {
+      ESP_LOGE(TAG, "OBIS: Buffer too short for OBIS code");
+      this->receive_buffer_.clear();
+      return;
+    }
+
+    uint8_t *obis_code = &plaintext[current_position + OBIS_CODE_OFFSET];
+    uint8_t obis_medium = obis_code[OBIS_A];
+    uint16_t obis_cd = encode_uint16(obis_code[OBIS_C], obis_code[OBIS_D]);
+
+    bool timestamp_found = false;
+    bool meter_number_found = false;
+    if (this->provider_ == PROVIDER_NETZNOE) {
+      // Do not advance Position when reading the Timestamp at DECODER_START_OFFSET
+      if ((obis_code_length == OBIS_CODE_LENGTH_EXTENDED) && (current_position == DECODER_START_OFFSET)) {
+        timestamp_found = true;
+      } else if (power_factor_found) {
+        meter_number_found = true;
+        power_factor_found = false;
+      } else {
+        current_position += obis_code_length + OBIS_CODE_OFFSET;  // Advance past code and position
+      }
+    } else {
+      current_position += obis_code_length + OBIS_CODE_OFFSET;  // Advance past code, position and type
+    }
+    if (!timestamp_found && !meter_number_found && obis_medium != Medium::ELECTRICITY &&
+        obis_medium != Medium::ABSTRACT) {
+      ESP_LOGE(TAG, "OBIS: Unsupported OBIS medium: %x", obis_medium);
+      this->receive_buffer_.clear();
+      return;
+    }
+
+    if (current_position >= message_length) {
+      ESP_LOGE(TAG, "OBIS: Buffer too short for data type");
+      this->receive_buffer_.clear();
+      return;
+    }
+
+    float value = 0.0f;
+    uint8_t value_size = 0;
+    uint8_t data_type = plaintext[current_position];
+    current_position++;
+
+    switch (data_type) {
+      case DataType::DOUBLE_LONG_UNSIGNED: {
+        value_size = 4;
+        if (current_position + value_size > message_length) {
+          ESP_LOGE(TAG, "OBIS: Buffer too short for DOUBLE_LONG_UNSIGNED");
+          this->receive_buffer_.clear();
+          return;
+        }
+        value = encode_uint32(plaintext[current_position + 0], plaintext[current_position + 1],
+                              plaintext[current_position + 2], plaintext[current_position + 3]);
+        current_position += value_size;
+        break;
+      }
+      case DataType::LONG_UNSIGNED: {
+        value_size = 2;
+        if (current_position + value_size > message_length) {
+          ESP_LOGE(TAG, "OBIS: Buffer too short for LONG_UNSIGNED");
+          this->receive_buffer_.clear();
+          return;
+        }
+        value = encode_uint16(plaintext[current_position + 0], plaintext[current_position + 1]);
+        current_position += value_size;
+        break;
+      }
+      case DataType::OCTET_STRING: {
+        uint8_t data_length = plaintext[current_position];
+        current_position++;  // Advance past string length
+        if (current_position + data_length > message_length) {
+          ESP_LOGE(TAG, "OBIS: Buffer too short for OCTET_STRING");
+          this->receive_buffer_.clear();
+          return;
+        }
+        // Handle timestamp (normal OBIS code or NETZNOE special case)
+        if (obis_cd == OBIS_TIMESTAMP || timestamp_found) {
+          if (data_length < 8) {
+            ESP_LOGE(TAG, "OBIS: Timestamp data too short: %u", data_length);
+            this->receive_buffer_.clear();
+            return;
+          }
+          uint16_t year = encode_uint16(plaintext[current_position + 0], plaintext[current_position + 1]);
+          uint8_t month = plaintext[current_position + 2];
+          uint8_t day = plaintext[current_position + 3];
+          uint8_t hour = plaintext[current_position + 5];
+          uint8_t minute = plaintext[current_position + 6];
+          uint8_t second = plaintext[current_position + 7];
+          if (year > 9999 || month > 12 || day > 31 || hour > 23 || minute > 59 || second > 59) {
+            ESP_LOGE(TAG, "Invalid timestamp values: %04u-%02u-%02uT%02u:%02u:%02uZ", year, month, day, hour, minute,
+                     second);
+            this->receive_buffer_.clear();
+            return;
+          }
+          snprintf(data.timestamp, sizeof(data.timestamp), "%04u-%02u-%02uT%02u:%02u:%02uZ", year, month, day, hour,
+                   minute, second);
+        } else if (meter_number_found) {
+          snprintf(data.meternumber, sizeof(data.meternumber), "%.*s", data_length, &plaintext[current_position]);
+        }
+        current_position += data_length;
+        break;
+      }
+      default:
+        ESP_LOGE(TAG, "OBIS: Unsupported OBIS data type: %x", data_type);
+        this->receive_buffer_.clear();
+        return;
+    }
+
+    // Skip break after data
+    if (this->provider_ == PROVIDER_NETZNOE) {
+      // Don't skip the break on the first timestamp, as there's none
+      if (!timestamp_found) {
+        current_position += 2;
+      }
+    } else {
+      current_position += 2;
+    }
+
+    // Check for additional data (scaler-unit structure)
+    if (current_position < message_length && plaintext[current_position] == DataType::INTEGER) {
+      // Apply scaler: real_value = raw_value × 10^scaler
+      if (current_position + 1 < message_length) {
+        int8_t scaler = static_cast<int8_t>(plaintext[current_position + 1]);
+        if (scaler != 0) {
+          value *= pow10_int(scaler);
+        }
+      }
+
+      // on EVN Meters there is no additional break
+      if (this->provider_ == PROVIDER_NETZNOE) {
+        current_position += 4;
+      } else {
+        current_position += 6;
+      }
+    }
+
+    // Handle numeric values (LONG_UNSIGNED and DOUBLE_LONG_UNSIGNED)
+    if (value_size > 0) {
+      switch (obis_cd) {
+        case OBIS_VOLTAGE_L1:
+          data.voltage_l1 = value;
+          break;
+        case OBIS_VOLTAGE_L2:
+          data.voltage_l2 = value;
+          break;
+        case OBIS_VOLTAGE_L3:
+          data.voltage_l3 = value;
+          break;
+        case OBIS_CURRENT_L1:
+          data.current_l1 = value;
+          break;
+        case OBIS_CURRENT_L2:
+          data.current_l2 = value;
+          break;
+        case OBIS_CURRENT_L3:
+          data.current_l3 = value;
+          break;
+        case OBIS_ACTIVE_POWER_PLUS:
+          data.active_power_plus = value;
+          break;
+        case OBIS_ACTIVE_POWER_MINUS:
+          data.active_power_minus = value;
+          break;
+        case OBIS_ACTIVE_ENERGY_PLUS:
+          data.active_energy_plus = value;
+          break;
+        case OBIS_ACTIVE_ENERGY_MINUS:
+          data.active_energy_minus = value;
+          break;
+        case OBIS_REACTIVE_ENERGY_PLUS:
+          data.reactive_energy_plus = value;
+          break;
+        case OBIS_REACTIVE_ENERGY_MINUS:
+          data.reactive_energy_minus = value;
+          break;
+        case OBIS_POWER_FACTOR:
+          data.power_factor = value;
+          power_factor_found = true;
+          break;
+        default:
+          ESP_LOGW(TAG, "Unsupported OBIS code 0x%04X", obis_cd);
       }
     }
   }
-#endif
 
-#ifdef USE_BINARY_SENSOR
-  if (is_numeric) {
-    bool state = float_val != 0.0f;
-    for (auto &item : this->binary_sensors_) {
-      if (item.obis_code == obis_code) {
-        item.sensor->publish_state(state);
-        updated_count++;
-      }
-    }
-  }
-#endif
+  this->receive_buffer_.clear();
 
-  if (updated_count == 0) {
-    ESP_LOGV(TAG, "Received OBIS %s, but no sensors are registered for it.", obis_code);
-  }
+  ESP_LOGI(TAG, "Received valid data");
+  this->publish_sensors(data);
+  this->status_clear_warning();
 }
 
-#ifdef USE_SENSOR
-void DlmsMeterComponent::register_sensor(const std::string &obis_code, sensor::Sensor *sensor) {
-  this->sensors_.push_back({obis_code, sensor});
-}
-#endif
-#ifdef USE_TEXT_SENSOR
-void DlmsMeterComponent::register_text_sensor(const std::string &obis_code, text_sensor::TextSensor *sensor) {
-  this->text_sensors_.push_back({obis_code, sensor});
-}
-#endif
-#ifdef USE_BINARY_SENSOR
-void DlmsMeterComponent::register_binary_sensor(const std::string &obis_code, binary_sensor::BinarySensor *sensor) {
-  this->binary_sensors_.push_back({obis_code, sensor});
-}
-#endif
-
 }  // namespace esphome::dlms_meter