Merge remote-tracking branch 'origin/dev' into climate-ir-code-table

CODEOWNERS

@@ -741,7 +741,7 @@ esphome/components/web_server_idf/* @dentra
 esphome/components/weikai/* @DrCoolZic
 esphome/components/weikai_i2c/* @DrCoolZic
 esphome/components/weikai_spi/* @DrCoolZic
-esphome/components/whirlpool/* @arpena @glmnet
+esphome/components/whirlpool/* @arpena @glmnet @Rodrigoah
 esphome/components/whynter/* @aeonsablaze
 esphome/components/wiegand/* @ssieb
 esphome/components/wireguard/* @droscy @lhoracek @thomas0bernard

esphome/components/climate_ir/climate_ir.cpp

@@ -95,4 +95,19 @@ void ClimateIR::dump_config() {
                 YESNO(this->modes_.count(climate::CLIMATE_MODE_HEAT_COOL)));
 }
 
+int find_ir_code_index(const IRCode *table, size_t count, uint8_t key, bool match_code) {
+  for (size_t i = 0; i < count; i++) {
+    if (progmem_read_byte(match_code ? &table[i].code : &table[i].value) == key)
+      return static_cast<int>(i);
+  }
+  return -1;
+}
+
+uint8_t lookup_ir_code(const IRCode *table, size_t count, uint8_t key, bool match_code, uint8_t fallback) {
+  const int index = find_ir_code_index(table, count, key, match_code);
+  if (index < 0)
+    return fallback;
+  return progmem_read_byte(match_code ? &table[index].value : &table[index].code);
+}
+
 }  // namespace esphome::climate_ir

esphome/components/climate_ir/climate_ir.h

@@ -6,9 +6,42 @@
 #include "esphome/components/remote_base/remote_base.h"
 #include "esphome/components/remote_transmitter/remote_transmitter.h"
 #include "esphome/components/sensor/sensor.h"
+#include "esphome/core/hal.h"
+#include "esphome/core/optional.h"
 
 namespace esphome::climate_ir {
 
+/// One entry of a PROGMEM table that maps a climate enum value to the unit's code.
+struct IRCode {
+  uint8_t value;  // a climate enum; they are all uint8_t
+  uint8_t code;
+};
+
+/// Index of the entry whose value (or, with match_code, code) is key, or -1. Reads the table from PROGMEM.
+int find_ir_code_index(const IRCode *table, size_t count, uint8_t key, bool match_code);
+
+/// The entry whose value (or, with match_code, code) is key, read from PROGMEM.
+template<size_t N>
+ESPHOME_ALWAYS_INLINE optional<IRCode> find_ir_code(const IRCode (&table)[N], uint8_t key, bool match_code) {
+  const int index = find_ir_code_index(table, N, key, match_code);
+  if (index < 0)
+    return {};
+  return IRCode{progmem_read_byte(&table[index].value), progmem_read_byte(&table[index].code)};
+}
+
+/// The code for value (or, with match_code, the value for code), or fallback when the table has no such entry.
+uint8_t lookup_ir_code(const IRCode *table, size_t count, uint8_t key, bool match_code, uint8_t fallback);
+
+/// The code for value, or fallback when the table has no such value.
+template<size_t N> uint8_t to_ir_code(const IRCode (&table)[N], uint8_t value, uint8_t fallback) {
+  return lookup_ir_code(table, N, value, false, fallback);
+}
+/// The value for code, or fallback when the table has no such code; pass the current state to keep it.
+template<typename T, size_t N> T from_ir_code(const IRCode (&table)[N], uint8_t code, T fallback) {
+  static_assert(sizeof(T) == sizeof(uint8_t), "IRCode values are one byte");
+  return static_cast<T>(lookup_ir_code(table, N, code, true, static_cast<uint8_t>(fallback)));
+}
+
 /* A base for climate which works by sending (and receiving) IR codes
 
     To send IR codes implement

esphome/components/ethernet/ethernet_component.h

@@ -7,6 +7,8 @@
 #include "esphome/core/automation.h"
 #include "esphome/components/network/ip_address.h"
 
+#include <atomic>
+
 #ifdef USE_ETHERNET
 
 #ifdef USE_ESP32
@@ -366,6 +368,9 @@ class EthernetComponent final : public Component {
 
 #ifdef USE_ETHERNET_IP_STATE_LISTENERS
   StaticVector<EthernetIPStateListener *, ESPHOME_ETHERNET_IP_STATE_LISTENERS> ip_state_listeners_;
+#ifdef USE_ESP32
+  std::atomic<uint8_t> ip_state_pending_{0};
+#endif
 #endif
 
 #ifdef USE_ETHERNET_CONNECT_TRIGGER

esphome/components/ethernet/ethernet_component_esp32.cpp

@@ -129,6 +129,14 @@ void EthernetComponent::log_error_and_mark_failed_(esp_err_t err, const char *me
 void EthernetComponent::loop() {
   const uint32_t now = App.get_loop_component_start_time();
 
+#ifdef USE_ETHERNET_IP_STATE_LISTENERS
+  // The IP events arrive on the event task; the listeners publish states, so notify them here
+  if (this->ip_state_pending_.load(std::memory_order_acquire) != 0) {
+    this->ip_state_pending_.store(0, std::memory_order_relaxed);
+    this->notify_ip_state_listeners_();
+  }
+#endif
+
   switch (this->state_) {
     case EthernetComponentState::STOPPED:
       if (this->started_) {
@@ -770,7 +778,8 @@ void EthernetComponent::eth_event_handler(void *arg, esp_event_base_t event_base
       event_name = "ETH connected";
       // For static IP configurations, GOT_IP event may not fire, so notify IP listeners here
 #if defined(USE_ETHERNET_IP_STATE_LISTENERS) && defined(USE_ETHERNET_MANUAL_IP)
-      global_eth_component->notify_ip_state_listeners_();
+      global_eth_component->ip_state_pending_.store(1, std::memory_order_release);
+      global_eth_component->enable_loop_soon_any_context();
 #endif
 #if USE_NETWORK_IPV6
       // Start SLAAC on link-up, not after the DHCPv4 lease. This also restores the
@@ -798,6 +807,9 @@ void EthernetComponent::got_ip_event_handler(void *arg, esp_event_base_t event_b
   const esp_netif_ip_info_t *ip_info = &event->ip_info;
   ESP_LOGV(TAG, "[Ethernet event] ETH Got IP " IPSTR, IP2STR(&ip_info->ip));
   global_eth_component->got_ipv4_address_ = true;
+#ifdef USE_ETHERNET_IP_STATE_LISTENERS
+  global_eth_component->ip_state_pending_.store(1, std::memory_order_release);
+#endif
 #if USE_NETWORK_IPV6 && (USE_NETWORK_MIN_IPV6_ADDR_COUNT > 0)
   global_eth_component->connected_ = global_eth_component->ipv6_count_ >= USE_NETWORK_MIN_IPV6_ADDR_COUNT;
   global_eth_component->enable_loop_soon_any_context();  // Enable loop when connection state changes
@@ -805,9 +817,6 @@ void EthernetComponent::got_ip_event_handler(void *arg, esp_event_base_t event_b
   global_eth_component->connected_ = true;
   global_eth_component->enable_loop_soon_any_context();  // Enable loop when connection state changes
 #endif /* USE_NETWORK_IPV6 */
-#ifdef USE_ETHERNET_IP_STATE_LISTENERS
-  global_eth_component->notify_ip_state_listeners_();
-#endif
 }
 
 #if USE_NETWORK_IPV6
@@ -819,6 +828,9 @@ void EthernetComponent::got_ip6_event_handler(void *arg, esp_event_base_t event_
   // after a link flap fires another event for the same address.
   struct esp_ip6_addr if_ip6s[CONFIG_LWIP_IPV6_NUM_ADDRESSES];
   global_eth_component->ipv6_count_ = esp_netif_get_all_ip6(global_eth_component->eth_netif_, if_ip6s);
+#ifdef USE_ETHERNET_IP_STATE_LISTENERS
+  global_eth_component->ip_state_pending_.store(1, std::memory_order_release);
+#endif
 #if (USE_NETWORK_MIN_IPV6_ADDR_COUNT > 0)
   global_eth_component->connected_ =
       global_eth_component->got_ipv4_address_ && (global_eth_component->ipv6_count_ >= USE_NETWORK_MIN_IPV6_ADDR_COUNT);
@@ -827,9 +839,6 @@ void EthernetComponent::got_ip6_event_handler(void *arg, esp_event_base_t event_
   global_eth_component->connected_ = global_eth_component->got_ipv4_address_;
   global_eth_component->enable_loop_soon_any_context();  // Enable loop when connection state changes
 #endif
-#ifdef USE_ETHERNET_IP_STATE_LISTENERS
-  global_eth_component->notify_ip_state_listeners_();
-#endif
 }
 #endif /* USE_NETWORK_IPV6 */
 

esphome/components/friedrich/friedrich.cpp

@@ -50,34 +50,25 @@ static constexpr uint8_t STATE_TEMPLATE[STATE_MESSAGE_LENGTH] PROGMEM = {
 static constexpr uint8_t OFF_FRAME[STATE_MESSAGE_LENGTH_UTIL] PROGMEM = {0x00, 0x08, 0x08, BYTE3_POWER_OFF,
                                                                          255 - BYTE3_POWER_OFF};
 
-struct Code {
-  uint8_t value;  // a climate enum, all of which are uint8_t
-  uint8_t code;
-};
-static constexpr Code MODES[] PROGMEM = {
+using climate_ir::find_ir_code;
+using climate_ir::from_ir_code;
+using climate_ir::IRCode;
+using climate_ir::to_ir_code;
+
+// A received mode that is not listed is ignored
+static constexpr IRCode MODES[] PROGMEM = {
     {climate::CLIMATE_MODE_HEAT_COOL, BYTE7_MODE_AUTO},
     {climate::CLIMATE_MODE_COOL, 0x80},
     {climate::CLIMATE_MODE_DRY, 0x40},
     {climate::CLIMATE_MODE_FAN_ONLY, 0xC0},
     {climate::CLIMATE_MODE_HEAT, 0x20},
 };
-static constexpr Code FANS[] PROGMEM = {
+static constexpr IRCode FANS[] PROGMEM = {
     {climate::CLIMATE_FAN_AUTO, BYTE8_FAN_AUTO}, {climate::CLIMATE_FAN_HIGH, 0x80},
     {climate::CLIMATE_FAN_MEDIUM, 0x40},         {climate::CLIMATE_FAN_LOW, 0xC0},
     {climate::CLIMATE_FAN_QUIET, 0x20},
 };
 
-// The entry whose value (or code) matches key. Entries are copied out of PROGMEM.
-template<size_t N> static optional<Code> find_entry(const Code (&table)[N], uint8_t key, bool match_code) {
-  for (const Code &slot : table) {
-    Code entry;
-    progmem_memcpy(&entry, &slot, sizeof(entry));
-    if ((match_code ? entry.code : entry.value) == key)
-      return entry;
-  }
-  return {};
-}
-
 // The temperature code is the 4-bit reversal of (F - TEMP_MIN) / TEMP_STEP; the mapping is its own inverse.
 static uint8_t reverse_nibble(uint8_t value) { return reverse_bits(value) >> 4; }
 
@@ -151,14 +142,11 @@ void FriedrichClimate::transmit_state() {
   temperature += temperature % 2;
   this->target_temperature = temperature;
 
-  const auto mode = find_entry(MODES, this->mode, false);
-  const auto fan = find_entry(FANS, this->fan_mode.value_or(climate::CLIMATE_FAN_AUTO), false);
-
   uint8_t frame[STATE_MESSAGE_LENGTH];
   progmem_memcpy(frame, STATE_TEMPLATE, sizeof(frame));
   frame[6] |= reverse_nibble((temperature - TEMP_MIN) / TEMP_STEP);
-  frame[7] = mode.has_value() ? mode->code : BYTE7_MODE_AUTO;
-  frame[8] = fan.has_value() ? fan->code : BYTE8_FAN_AUTO;
+  frame[7] = to_ir_code(MODES, this->mode, BYTE7_MODE_AUTO);
+  frame[8] = to_ir_code(FANS, this->fan_mode.value_or(climate::CLIMATE_FAN_AUTO), BYTE8_FAN_AUTO);
   if (this->swing_mode != climate::CLIMATE_SWING_OFF)
     frame[8] |= BYTE8_FAN_SWING;
   frame[STATE_MESSAGE_LENGTH - 1] = checksum_state(frame);
@@ -209,7 +197,7 @@ bool FriedrichClimate::on_receive(remote_base::RemoteReceiveData src) {
     return false;
 
   // Ignore frames with a mode this component does not expose (e.g. MIN_HEAT, COIL_DRY)
-  const auto mode = find_entry(MODES, d[7], true);
+  const auto mode = find_ir_code(MODES, d[7], true);
   if (!mode.has_value()) {
     ESP_LOGV(TAG, "Ignoring unknown mode 0x%02X", d[7]);
     return false;
@@ -224,8 +212,7 @@ bool FriedrichClimate::on_receive(remote_base::RemoteReceiveData src) {
     this->target_temperature = TEMP_MIN + temp_index * TEMP_STEP;
 
   this->swing_mode = (d[8] & BYTE8_FAN_SWING) ? climate::CLIMATE_SWING_VERTICAL : climate::CLIMATE_SWING_OFF;
-  const auto fan = find_entry(FANS, d[8] & ~BYTE8_FAN_SWING, true);
-  this->fan_mode = fan.has_value() ? static_cast<climate::ClimateFanMode>(fan->value) : climate::CLIMATE_FAN_AUTO;
+  this->fan_mode = from_ir_code(FANS, d[8] & ~BYTE8_FAN_SWING, climate::CLIMATE_FAN_AUTO);
 
   this->publish_state();
   return true;

esphome/components/mistral_ir/mistral_ir.cpp

@@ -21,19 +21,16 @@ constexpr uint8_t MISTRAL_POWER_ON = 0x20;
 constexpr uint8_t MISTRAL_TEMP_OFFSET = 0x9F;
 constexpr uint8_t MISTRAL_MODE_AUTO = 0x10;
 
-// The tables live in flash, so entries are copied out before use
-struct ModeCode {
-  climate::ClimateMode mode;
-  uint8_t code;
-};
-static const ModeCode MODES[] PROGMEM = {
+// OFF sends the auto mode code and only clears the power byte
+static constexpr climate_ir::IRCode MODES[] PROGMEM = {
+    {climate::CLIMATE_MODE_HEAT_COOL, MISTRAL_MODE_AUTO},
     {climate::CLIMATE_MODE_COOL, 0xC0},
     {climate::CLIMATE_MODE_DRY, 0x40},
     {climate::CLIMATE_MODE_FAN_ONLY, 0x80},
     {climate::CLIMATE_MODE_HEAT, 0x60},
-    {climate::CLIMATE_MODE_HEAT_COOL, MISTRAL_MODE_AUTO},
 };
 
+// Each fan speed sets two bytes; the table lives in flash, so entries are copied out before use
 struct FanCode {
   climate::ClimateFanMode fan;
   uint8_t byte1;
@@ -78,7 +75,6 @@ static bool is_valid_frame(const uint8_t *frame) {
 }
 
 void MistralIR::transmit_state() {
-  const auto mode = find_entry(MODES, [this](const ModeCode &m) { return m.mode == this->mode; });
   const climate::ClimateFanMode fan_mode = this->fan_mode.value_or(climate::CLIMATE_FAN_AUTO);
   const FanCode fan =
       find_entry(FANS, [fan_mode](const FanCode &f) { return f.fan == fan_mode; }).value_or(load_entry(FANS[0]));
@@ -88,7 +84,7 @@ void MistralIR::transmit_state() {
   progmem_memcpy(frame, FRAME_TEMPLATE, sizeof(frame));
   frame[1] = fan.byte1;
   frame[3] = this->mode == climate::CLIMATE_MODE_OFF ? MISTRAL_POWER_OFF : MISTRAL_POWER_ON;
-  frame[4] = mode.has_value() ? mode->code : MISTRAL_MODE_AUTO;
+  frame[4] = climate_ir::to_ir_code(MODES, this->mode, MISTRAL_MODE_AUTO);
   frame[5] = reverse_bits(static_cast<uint8_t>(MISTRAL_TEMP_OFFSET - temp));
   frame[6] = fan.byte6;
   frame[11] = compute_checksum(frame);
@@ -116,12 +112,12 @@ bool MistralIR::on_receive(remote_base::RemoteReceiveData data) {
     return false;
 
   // Decode everything before touching the state so an unknown code leaves it untouched
-  const auto mode = find_entry(MODES, [frame](const ModeCode &m) { return m.code == frame[4]; });
+  const auto mode = climate_ir::find_ir_code(MODES, frame[4], true);
   const auto fan = find_entry(FANS, [frame](const FanCode &f) { return f.byte1 == frame[1] && f.byte6 == frame[6]; });
   if (!mode.has_value() || !fan.has_value())
     return false;
 
-  this->mode = mode->mode;
+  this->mode = static_cast<climate::ClimateMode>(mode->value);
   this->target_temperature =
       clamp<float>(MISTRAL_TEMP_OFFSET - reverse_bits(frame[5]), MISTRAL_TEMP_MIN, MISTRAL_TEMP_MAX);
   this->fan_mode = fan->fan;

esphome/components/samsung/samsung.cpp

@@ -47,46 +47,28 @@ static bool is_powered_on(const uint8_t *state) {
   return get_field(state, POWER_1) == POWER_ON && get_field(state, POWER_2) == POWER_ON;
 }
 
-struct Code {
-  uint8_t value;  // a climate enum, all of which are uint8_t
-  uint8_t code;
-};
-// The first entry of each table is the fallback in both directions
-static constexpr Code MODES[] PROGMEM = {
+using climate_ir::from_ir_code;
+using climate_ir::IRCode;
+using climate_ir::to_ir_code;
+
+// Codes not listed fall back to auto (mode and fan) and to swing off
+static constexpr IRCode MODES[] PROGMEM = {
     {climate::CLIMATE_MODE_HEAT_COOL, 0}, {climate::CLIMATE_MODE_COOL, 1}, {climate::CLIMATE_MODE_DRY, 2},
     {climate::CLIMATE_MODE_FAN_ONLY, 3},  {climate::CLIMATE_MODE_HEAT, 4},
 };
-static constexpr Code FANS[] PROGMEM = {
+static constexpr IRCode FANS[] PROGMEM = {
     {climate::CLIMATE_FAN_AUTO, 0},
     {climate::CLIMATE_FAN_LOW, 2},
     {climate::CLIMATE_FAN_MEDIUM, 4},
     {climate::CLIMATE_FAN_HIGH, 5},
 };
-static constexpr Code SWINGS[] PROGMEM = {
+static constexpr IRCode SWINGS[] PROGMEM = {
     {climate::CLIMATE_SWING_OFF, 0b111},
     {climate::CLIMATE_SWING_VERTICAL, 0b010},
     {climate::CLIMATE_SWING_HORIZONTAL, 0b011},
     {climate::CLIMATE_SWING_BOTH, 0b100},
 };
 
-// Returns the entry whose value (or code) matches key, else the first entry. Entries are copied out of PROGMEM.
-static Code find_entry(const Code *table, size_t count, uint8_t key, bool match_code) {
-  Code entry{};
-  for (size_t i = 0; i < count; i++) {
-    progmem_memcpy(&entry, &table[i], sizeof(entry));
-    if ((match_code ? entry.code : entry.value) == key)
-      return entry;
-  }
-  progmem_memcpy(&entry, table, sizeof(entry));
-  return entry;
-}
-template<size_t N> static uint8_t to_code(const Code (&table)[N], uint8_t value) {
-  return find_entry(table, N, value, false).code;
-}
-template<typename T, size_t N> static T from_code(const Code (&table)[N], uint8_t code) {
-  return static_cast<T>(find_entry(table, N, code, true).value);
-}
-
 // Inverted count of the one bits in a section, skipping the two nibbles that hold the checksum itself.
 // See https://github.com/crankyoldgit/IRremoteESP8266/issues/1538#issuecomment-894645947
 static uint8_t section_checksum(const uint8_t *section) {
@@ -123,13 +105,13 @@ void SamsungClimate::transmit_state() {
 
   if (on) {
     progmem_memcpy(state, RESET_STATE, SAMSUNG_AC_STATE_LENGTH);
-    set_field(state, MODE, to_code(MODES, this->mode));
+    set_field(state, MODE, to_ir_code(MODES, this->mode, 0));
   }  // else keep the last mode so the power off frame still carries a valid state
 
   const uint8_t temp = clamp<uint8_t>(this->target_temperature, SAMSUNG_AC_TEMP_MIN, SAMSUNG_AC_TEMP_MAX);
   set_field(state, TEMP, temp - SAMSUNG_AC_TEMP_MIN);
-  set_field(state, SWING, to_code(SWINGS, this->swing_mode));
-  set_field(state, FAN, to_code(FANS, this->fan_mode.value_or(climate::CLIMATE_FAN_AUTO)));
+  set_field(state, SWING, to_ir_code(SWINGS, this->swing_mode, 0b111));
+  set_field(state, FAN, to_ir_code(FANS, this->fan_mode.value_or(climate::CLIMATE_FAN_AUTO), 0));
   set_field(state, POWER_1, on ? POWER_ON : 0);
   set_field(state, POWER_2, on ? POWER_ON : 0);
 
@@ -212,11 +194,11 @@ bool SamsungClimate::on_receive(remote_base::RemoteReceiveData data) {
   memcpy(state, frame, SAMSUNG_AC_SECTION_LENGTH);
   memcpy(state + SAMSUNG_AC_SECTION_LENGTH, frame + length - SAMSUNG_AC_SECTION_LENGTH, SAMSUNG_AC_SECTION_LENGTH);
 
-  this->swing_mode = from_code<climate::ClimateSwingMode>(SWINGS, get_field(state, SWING));
+  this->swing_mode = from_ir_code(SWINGS, get_field(state, SWING), climate::CLIMATE_SWING_OFF);
   this->target_temperature = get_field(state, TEMP) + SAMSUNG_AC_TEMP_MIN;
-  this->fan_mode = from_code<climate::ClimateFanMode>(FANS, get_field(state, FAN));
-  this->mode =
-      is_powered_on(state) ? from_code<climate::ClimateMode>(MODES, get_field(state, MODE)) : climate::CLIMATE_MODE_OFF;
+  this->fan_mode = from_ir_code(FANS, get_field(state, FAN), climate::CLIMATE_FAN_AUTO);
+  this->mode = is_powered_on(state) ? from_ir_code(MODES, get_field(state, MODE), climate::CLIMATE_MODE_HEAT_COOL)
+                                    : climate::CLIMATE_MODE_OFF;
 
   ESP_LOGD(TAG, "Received %u byte frame, power %s", length, ONOFF(is_powered_on(state)));
   this->publish_state();

esphome/components/siemens_ira211/siemens_ira211.cpp

@@ -6,70 +6,32 @@ namespace esphome::siemens_ira211 {
 
 using namespace remote_base;
 
-struct PresetMapping {
-  climate::ClimatePreset preset;
-  IRA211Mode mode;
+// Presets map to IRA211Mode and fan modes to IRA211Fan. Values the other side does not know fall back to comfort
+// and auto.
+static constexpr climate_ir::IRCode PRESETS[] PROGMEM = {
+    {climate::CLIMATE_PRESET_COMFORT, static_cast<uint8_t>(IRA211Mode::IRA211_MODE_COMFORT)},
+    {climate::CLIMATE_PRESET_ECO, static_cast<uint8_t>(IRA211Mode::IRA211_MODE_TIMER)},
+};
+static constexpr climate_ir::IRCode FANS[] PROGMEM = {
+    {climate::CLIMATE_FAN_AUTO, static_cast<uint8_t>(IRA211Fan::IRA211_FAN_AUTO)},
+    {climate::CLIMATE_FAN_LOW, static_cast<uint8_t>(IRA211Fan::IRA211_FAN_LOW)},
+    {climate::CLIMATE_FAN_MEDIUM, static_cast<uint8_t>(IRA211Fan::IRA211_FAN_MEDIUM)},
+    {climate::CLIMATE_FAN_HIGH, static_cast<uint8_t>(IRA211Fan::IRA211_FAN_HIGH)},
 };
 
-static const PresetMapping PRESETS[] PROGMEM = {
-    {climate::CLIMATE_PRESET_COMFORT, IRA211Mode::IRA211_MODE_COMFORT},
-    {climate::CLIMATE_PRESET_ECO, IRA211Mode::IRA211_MODE_TIMER},
-};
-
-struct FanMapping {
-  climate::ClimateFanMode fan_mode;
-  IRA211Fan fan;
-};
-
-static const FanMapping FANS[] PROGMEM = {
-    {climate::CLIMATE_FAN_AUTO, IRA211Fan::IRA211_FAN_AUTO},
-    {climate::CLIMATE_FAN_LOW, IRA211Fan::IRA211_FAN_LOW},
-    {climate::CLIMATE_FAN_MEDIUM, IRA211Fan::IRA211_FAN_MEDIUM},
-    {climate::CLIMATE_FAN_HIGH, IRA211Fan::IRA211_FAN_HIGH},
-};
-
-// The tables live in flash, so entries are copied out before use
-template<typename T> static T load_entry(const T &slot) {
-  T entry;
-  progmem_memcpy(&entry, &slot, sizeof(T));
-  return entry;
-}
-
-// The first entry of each table is the fallback for values the other side does not know
 static IRA211Mode to_ira211_mode(climate::ClimatePreset preset) {
-  for (const auto &slot : PRESETS) {
-    const auto entry = load_entry(slot);
-    if (entry.preset == preset)
-      return entry.mode;
-  }
-  return load_entry(PRESETS[0]).mode;
+  return static_cast<IRA211Mode>(
+      climate_ir::to_ir_code(PRESETS, preset, static_cast<uint8_t>(IRA211Mode::IRA211_MODE_COMFORT)));
 }
-
 static climate::ClimatePreset to_climate_preset(IRA211Mode mode) {
-  for (const auto &slot : PRESETS) {
-    const auto entry = load_entry(slot);
-    if (entry.mode == mode)
-      return entry.preset;
-  }
-  return load_entry(PRESETS[0]).preset;
+  return climate_ir::from_ir_code(PRESETS, static_cast<uint8_t>(mode), climate::CLIMATE_PRESET_COMFORT);
 }
-
 static IRA211Fan to_ira211_fan(climate::ClimateFanMode fan_mode) {
-  for (const auto &slot : FANS) {
-    const auto entry = load_entry(slot);
-    if (entry.fan_mode == fan_mode)
-      return entry.fan;
-  }
-  return load_entry(FANS[0]).fan;
+  return static_cast<IRA211Fan>(
+      climate_ir::to_ir_code(FANS, fan_mode, static_cast<uint8_t>(IRA211Fan::IRA211_FAN_AUTO)));
 }
-
 static climate::ClimateFanMode to_climate_fan_mode(IRA211Fan fan) {
-  for (const auto &slot : FANS) {
-    const auto entry = load_entry(slot);
-    if (entry.fan == fan)
-      return entry.fan_mode;
-  }
-  return load_entry(FANS[0]).fan_mode;
+  return climate_ir::from_ir_code(FANS, static_cast<uint8_t>(fan), climate::CLIMATE_FAN_AUTO);
 }
 
 void SiemensIRA211Climate::setup() {

esphome/components/whirlpool/climate.py

@@ -5,13 +5,15 @@ from esphome.const import CONF_MODEL
 from esphome.types import ConfigType
 
 AUTO_LOAD = ["climate_ir"]
-CODEOWNERS = ["@glmnet", "@arpena"]
+CODEOWNERS = ["@glmnet", "@arpena", "@Rodrigoah"]
 
 whirlpool_ns = cg.esphome_ns.namespace("whirlpool")
 WhirlpoolClimate = whirlpool_ns.class_("WhirlpoolClimate", climate_ir.ClimateIR)
 
 Model = whirlpool_ns.enum("Model")
-MODELS = Model.options("DG11J1-3A", "DG11J1-91", "HISENSE_ARG", prefix="MODEL_")
+MODELS = Model.options(
+    "DG11J1-3A", "DG11J1-91", "HISENSE_ARG", "HITACHI_HCRA31NEWH", prefix="MODEL_"
+)
 
 CONFIG_SCHEMA = climate_ir.climate_ir_with_receiver_schema(WhirlpoolClimate).extend(
     {
@@ -26,3 +28,5 @@ async def to_code(config: ConfigType) -> None:
     # cv.enum keeps the YAML key as a str subclass; the MockObj value cannot be compared
     if config[CONF_MODEL] == "HISENSE_ARG":
         cg.add_define("USE_WHIRLPOOL_HISENSE_ARG")
+    elif config[CONF_MODEL] == "HITACHI_HCRA31NEWH":
+        cg.add_define("USE_WHIRLPOOL_HITACHI_HCRA31NEWH")

esphome/components/whirlpool/whirlpool.cpp

@@ -2,6 +2,8 @@
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
+#include <algorithm>
+
 namespace esphome::whirlpool {
 
 ESPHOME_LOG_TAG(TAG, "whirlpool.climate");
@@ -44,6 +46,17 @@ static constexpr uint8_t HISENSE_ARG_POWER_TOGGLE = 0x01;   // byte 15
 static constexpr uint8_t HISENSE_ARG_SETTINGS_ONLY = 0x02;  // byte 15
 static constexpr uint8_t HISENSE_ARG_FIXED_TEMP_STEP = 7;   // auto and fan-only send 23 C
 
+// Hitachi HCRA31NEWH model: power is a state in every frame
+static constexpr uint8_t HITACHI_BYTE10 = 0x20;      // byte 10
+static constexpr uint8_t HITACHI_COOL = 0x02;        // byte 15
+static constexpr uint8_t HITACHI_OFF = 0x01;         // byte 15
+static constexpr uint8_t HITACHI_BYTE18_ON = 0x38;   // byte 18
+static constexpr uint8_t HITACHI_BYTE18_OFF = 0x28;  // byte 18
+static constexpr uint8_t HITACHI_BYTE19 = 0x08;      // byte 19
+
+// Header, 21 bytes of 8 bits, two dividers and the footer mark
+static constexpr uint32_t WHIRLPOOL_FRAME_TIMINGS = 2 + WHIRLPOOL_STATE_LENGTH * 16 + 2 * 2 + 1;
+
 WhirlpoolClimate::WhirlpoolClimate()
     : climate_ir::ClimateIR(
           WHIRLPOOL_DG11J1_3A_TEMP_MIN, WHIRLPOOL_DG11J1_3A_TEMP_MAX, 1.0f, true, true,
@@ -55,19 +68,19 @@ void WhirlpoolClimate::transmit_state() {
   this->last_transmit_time_ = millis();  // setting the time of the last transmission.
   uint8_t remote_state[WHIRLPOOL_STATE_LENGTH];
   memset(remote_state, 0, sizeof(remote_state));
-  remote_state[0] = 0x83;
-  remote_state[1] = 0x06;
+  put_be16(remote_state, this->remote_id_());
   remote_state[6] = 0x80;
-  remote_state[18] = 0x08;  // the same on every supported model
+  remote_state[18] = 0x08;
 
-  auto powered_on = this->mode != climate::CLIMATE_MODE_OFF;
-  const bool power_toggle = powered_on != this->powered_on_assumed;
+  const bool powered_on = this->mode != climate::CLIMATE_MODE_OFF;
+  // Hitachi sends power as a state instead of a toggle
+  const bool power_toggle = !this->is_hitachi_hcra31newh_() && powered_on != this->powered_on_assumed;
   if (power_toggle) {
     // Set power toggle command
     remote_state[2] = 4;
     remote_state[15] = 1;
-    this->powered_on_assumed = powered_on;
   }
+  this->powered_on_assumed = powered_on;
   switch (this->mode) {
     case climate::CLIMATE_MODE_HEAT_COOL:
       // set fan auto
@@ -93,6 +106,10 @@ void WhirlpoolClimate::transmit_state() {
       remote_state[15] = 6;
       break;
     case climate::CLIMATE_MODE_OFF:
+      // These remotes keep the cool code in the power-off frame
+      if (this->is_hisense_arg_() || this->is_hitachi_hcra31newh_())
+        remote_state[3] = WHIRLPOOL_COOL;
+      break;
     default:
       break;
   }
@@ -102,6 +119,7 @@ void WhirlpoolClimate::transmit_state() {
   // Temperature
   auto temp = (uint8_t) roundf(clamp(this->target_temperature, this->temperature_min_(), this->temperature_max_()));
   const auto temp_step = (uint8_t) (temp - this->temperature_min_());
+  this->target_temperature = temp;  // publish what the unit was sent
   if (hisense_arg && this->fixed_temp_mode_()) {
     remote_state[3] |= HISENSE_ARG_FIXED_TEMP_STEP << 4;
   } else {
@@ -131,7 +149,6 @@ void WhirlpoolClimate::transmit_state() {
       remote_state[2] |= WHIRLPOOL_SWING_MASK;
       remote_state[8] = WHIRLPOOL_SWING_BYTE8;
     }
-    this->encode_hisense_arg_(remote_state, power_toggle, temp_step);
   } else if (this->send_swing_cmd_) {
     if (this->swing_mode == climate::CLIMATE_SWING_VERTICAL || this->swing_mode == climate::CLIMATE_SWING_OFF) {
       remote_state[2] |= WHIRLPOOL_SWING_MASK;
@@ -139,6 +156,11 @@ void WhirlpoolClimate::transmit_state() {
     }
   }
 
+  if (hisense_arg)
+    this->encode_hisense_arg_(remote_state, power_toggle, temp_step);
+  if (this->is_hitachi_hcra31newh_())
+    this->encode_hitachi_hcra31newh_(remote_state);
+
   // Checksum
   remote_state[13] = xor_bytes(&remote_state[2], 11, remote_state[13]);
   remote_state[20] = xor_bytes(&remote_state[14], 6, remote_state[20]);
@@ -148,6 +170,7 @@ void WhirlpoolClimate::transmit_state() {
   // Send code
   auto transmit = this->transmitter_->transmit();
   auto *data = transmit.get_data();
+  data->reserve(WHIRLPOOL_FRAME_TIMINGS);
 
   data->set_carrier_frequency(38000);
 
@@ -180,10 +203,6 @@ void WhirlpoolClimate::encode_hisense_arg_(uint8_t *remote_state, bool power_tog
   remote_state[15] = power_toggle ? HISENSE_ARG_POWER_TOGGLE : HISENSE_ARG_SETTINGS_ONLY;
 
   switch (this->mode) {
-    case climate::CLIMATE_MODE_OFF:
-      // The remote keeps the cool code in the power-off frame
-      remote_state[3] = (remote_state[3] & 0xF0) | WHIRLPOOL_COOL;
-      break;
     case climate::CLIMATE_MODE_DRY:
       // The unit runs these fan speeds itself; the user's choice is kept for the next mode change
       remote_state[2] &= ~WHIRLPOOL_FAN_MASK;
@@ -212,6 +231,27 @@ void WhirlpoolClimate::encode_hisense_arg_(uint8_t *remote_state, bool power_tog
 #endif
 }
 
+void WhirlpoolClimate::encode_hitachi_hcra31newh_(uint8_t *remote_state) const {
+#ifdef USE_WHIRLPOOL_HITACHI_HCRA31NEWH
+  remote_state[10] = HITACHI_BYTE10;
+  remote_state[18] = HITACHI_BYTE18_ON;
+  remote_state[19] = HITACHI_BYTE19;
+  // The unit takes the whole state from every frame: only the off frame carries the power bit
+  switch (this->mode) {
+    case climate::CLIMATE_MODE_COOL:
+      remote_state[15] = HITACHI_COOL;
+      break;
+    case climate::CLIMATE_MODE_OFF:
+      remote_state[2] |= WHIRLPOOL_POWER;
+      remote_state[15] = HITACHI_OFF;
+      remote_state[18] = HITACHI_BYTE18_OFF;
+      break;
+    default:
+      break;
+  }
+#endif
+}
+
 bool WhirlpoolClimate::on_receive(remote_base::RemoteReceiveData data) {
   // Check if the esp isn't currently transmitting.
   if (millis() - this->last_transmit_time_ < 500) {
@@ -234,7 +274,8 @@ bool WhirlpoolClimate::on_receive(remote_base::RemoteReceiveData data) {
       if (!data.expect_item(WHIRLPOOL_BIT_MARK, WHIRLPOOL_GAP))
         return false;
     }
-    if (i == WHIRLPOOL_SECOND_DIVIDER && !data.is_valid()) {
+    // The Hitachi remote always sends all 21 bytes; byte 18 holds its power state
+    if (i == WHIRLPOOL_SECOND_DIVIDER && !data.is_valid() && !this->is_hitachi_hcra31newh_()) {
       // Remote control only sent 14 bytes, nothing more to read, not even the footer
       ESP_LOGV(TAG, "Remote control only sent %d bytes", i);
       skip_footer = true;
@@ -261,13 +302,18 @@ bool WhirlpoolClimate::on_receive(remote_base::RemoteReceiveData data) {
   ESP_LOGV_HEX(TAG, remote_state, WHIRLPOOL_STATE_LENGTH, WHIRLPOOL_STATE_LENGTH, "Received: %s");
 
   // verify header remote code
-  if (remote_state[0] != 0x83 || remote_state[1] != 0x06)
+  if (encode_uint16(remote_state[0], remote_state[1]) != this->remote_id_())
     return false;
 
   // powr on/off button
   ESP_LOGV(TAG, "Power: %02X", (remote_state[2] & WHIRLPOOL_POWER));
 
-  if ((remote_state[2] & WHIRLPOOL_POWER) == WHIRLPOOL_POWER) {
+  if (this->is_hitachi_hcra31newh_()) {
+    // Power is a state: byte 18 says whether the unit is off
+    this->powered_on_assumed = remote_state[18] != HITACHI_BYTE18_OFF;
+    if (!this->powered_on_assumed)
+      this->mode = climate::CLIMATE_MODE_OFF;
+  } else if ((remote_state[2] & WHIRLPOOL_POWER) == WHIRLPOOL_POWER) {
     auto powered_on = this->mode != climate::CLIMATE_MODE_OFF;
 
     if (powered_on) {
@@ -309,7 +355,7 @@ bool WhirlpoolClimate::on_receive(remote_base::RemoteReceiveData data) {
     int temp = remote_state[3] & 0xF0;
     ESP_LOGVV(TAG, "Temperature Raw: %02X", temp);
     temp = (uint8_t) temp >> 4;
-    temp += static_cast<int>(this->temperature_min_());
+    temp = std::min(temp + static_cast<int>(this->temperature_min_()), static_cast<int>(this->temperature_max_()));
     ESP_LOGVV(TAG, "Temperature Climate: %u", temp);
     this->target_temperature = temp;
   }

esphome/components/whirlpool/whirlpool.h

@@ -6,9 +6,10 @@ namespace esphome::whirlpool {
 
 /// Simple enum to represent models.
 enum Model {
-  MODEL_DG11J1_3A = 0,    /// Temperature range is from 18 to 32
-  MODEL_DG11J1_91 = 1,    /// Temperature range is from 16 to 30
-  MODEL_HISENSE_ARG = 2,  /// Hisense/BGH (Argentina), 16 to 30
+  MODEL_DG11J1_3A = 0,           /// Temperature range is from 18 to 32
+  MODEL_DG11J1_91 = 1,           /// Temperature range is from 16 to 30
+  MODEL_HISENSE_ARG = 2,         /// Hisense/BGH (Argentina), 16 to 30
+  MODEL_HITACHI_HCRA31NEWH = 3,  /// Hitachi with the HCRA31NEWH remote, 16 to 30
 };
 
 // Temperature
@@ -29,7 +30,9 @@ class WhirlpoolClimate final : public climate_ir::ClimateIR {
 
   /// Override control to change settings of the climate device.
   void control(const climate::ClimateCall &call) override {
-    send_swing_cmd_ = call.get_swing_mode().has_value();
+    // The toggle remotes flip swing on every press, so only send one when the mode really changes
+    auto swing = call.get_swing_mode();
+    this->send_swing_cmd_ = swing.has_value() && *swing != this->swing_mode;
     climate_ir::ClimateIR::control(call);
   }
 
@@ -55,10 +58,22 @@ class WhirlpoolClimate final : public climate_ir::ClimateIR {
     return false;
 #endif
   }
+  /// False when the model is compiled out, so the compiler drops the Hitachi branches.
+  bool is_hitachi_hcra31newh_() const {
+#ifdef USE_WHIRLPOOL_HITACHI_HCRA31NEWH
+    return this->model_ == MODEL_HITACHI_HCRA31NEWH;
+#else
+    return false;
+#endif
+  }
+  /// The remote ID sent in bytes 0 and 1.
+  uint16_t remote_id_() const { return this->is_hitachi_hcra31newh_() ? 0xA959 : 0x8306; }
   /// Modes in which the Hisense ARG model sends a fixed temperature.
   bool fixed_temp_mode_() const;
   /// Add the Hisense ARG bytes on top of the common whirlpool frame.
   void encode_hisense_arg_(uint8_t *remote_state, bool power_toggle, uint8_t temp_step) const;
+  /// Add the Hitachi HCRA31NEWH bytes on top of the common whirlpool frame.
+  void encode_hitachi_hcra31newh_(uint8_t *remote_state) const;
   /// Set the time of the last transmission.
   uint32_t last_transmit_time_{};
 

esphome/components/wifi/wifi_component.h

@@ -563,7 +563,7 @@ class WiFiComponent final : public Component {
   // (In most use cases you won't need these)
   /// Setup WiFi interface.
   void setup() override;
-#if defined(USE_LN882X) || defined(USE_BK72XX)
+#if defined(USE_ESP32) || defined(USE_LN882X) || defined(USE_BK72XX)
   void on_powerdown() override;
 #endif
   void start();

esphome/components/wifi/wifi_component_esp_idf.cpp

@@ -1635,6 +1635,21 @@ bool WiFiComponent::wifi_dpp_start_listen_() {
 void WiFiComponent::wifi_dpp_stop_listen_() { esp_supp_dpp_stop_listen(); }
 #endif
 
+void WiFiComponent::on_powerdown() {
+  // Leave the AP before esp_restart() or deep sleep stops Wi-Fi. esp_wifi_stop() while associated
+  // makes the ESP32 retransmit its Disassociation up to the retry limit although the AP ACKs it
+  // (32 copies with protected management frames), which some APs handle badly.
+  // Upstream bug: https://github.com/espressif/esp-idf/issues/19443 - remove this once it is fixed
+  // in the ESP-IDF versions we support.
+  // Ask the driver: s_sta_connected lags until the main loop has handled the connect event.
+  wifi_ap_record_t ap_info;
+  if (esp_wifi_sta_get_ap_info(&ap_info) != ESP_OK)
+    return;
+  ESP_LOGD(TAG, "Disconnecting before powerdown");
+  esp_wifi_disconnect();
+  delay(100);  // NOLINT: once per reboot or deep sleep, lets the disassociation go out
+}
+
 bool WiFiComponent::wifi_disconnect_() { return esp_wifi_disconnect(); }
 
 bssid_t WiFiComponent::wifi_bssid() {

esphome/core/application.cpp

@@ -294,6 +294,8 @@ void Application::reboot() {
   for (auto &component : std::ranges::reverse_view(this->components_)) {
     component->on_shutdown();
   }
+  // No teardown on a forced reboot, but still power hardware down (Wi-Fi leaves the AP)
+  this->run_powerdown_hooks();
   arch_restart();
 }
 void Application::safe_reboot() {

esphome/core/component.h

@@ -185,10 +185,12 @@ class Component {
    */
   virtual bool teardown() { return true; }
 
-  /** Called after teardown is complete to power down hardware.
+  /** Called last before a reboot or deep sleep to power down hardware.
    *
-   * This is called after all components have finished their teardown process,
+   * On a safe shutdown this is called after all components have finished their teardown process,
    * making it safe to power down hardware like ethernet PHY.
+   * On a forced reboot (Application::reboot()) it is called right after on_shutdown() with no
+   * teardown, so implementations must not assume teardown() has run.
    */
   virtual void on_powerdown() {}
 

esphome/core/defines.h

@@ -387,6 +387,7 @@
 #define USE_WATER_HEATER
 #define USE_WATER_HEATER_VISUAL_OVERRIDES
 #define USE_WHIRLPOOL_HISENSE_ARG
+#define USE_WHIRLPOOL_HITACHI_HCRA31NEWH
 #define USE_ZWAVE_PROXY
 
 // Feature flags which do not work for zephyr

esphome/core/helpers.cpp

@@ -337,6 +337,57 @@ size_t truncate_name_to(char *buffer, size_t buffer_size, const char *name, size
 
 // Parsing & formatting
 
+// A plain decimal converts exactly with one division: the digits accumulate
+// into an integer that stays below 2^24 and the fraction's scale is a power of
+// ten up to 1e9 (2^9 * 5^9), so both convert to float exactly and IEEE division
+// rounds the quotient correctly, the same result strtof produces.
+static constexpr uint32_t PARSE_FLOAT_MANTISSA_LIMIT = 1000000;  // one more digit stays below 2^24
+static constexpr uint32_t PARSE_FLOAT_MAX_FRACTION_DIGITS = 9;
+
+optional<float> parse_float(const char *str) {
+  const char *p = str;
+  const bool negative = *p == '-';
+  if (negative || *p == '+')
+    p++;
+  const char *digits = p;
+  const char *dot = nullptr;
+  uint32_t mantissa = 0;
+  for (;; p++) {
+    const uint32_t d = static_cast<unsigned char>(*p) - '0';
+    if (d > 9) {
+      if (*p == '.' && dot == nullptr) {
+        dot = p;
+        continue;
+      }
+      break;
+    }
+    if (mantissa >= PARSE_FLOAT_MANTISSA_LIMIT)
+      break;
+    mantissa = mantissa * 10 + d;
+  }
+  const uint32_t fraction_digits = dot != nullptr ? p - dot - 1 : 0;
+  const bool any_digit = p - digits > (dot != nullptr ? 1 : 0);
+  if (*p == '\0' && any_digit && fraction_digits <= PARSE_FLOAT_MAX_FRACTION_DIGITS) {
+    // The mantissa is exact in a float, so the sign goes on before the one rounding step
+    float value = static_cast<float>(mantissa);
+    if (negative)
+      value = -value;
+    if (fraction_digits != 0) {
+      uint32_t scale = 10;
+      for (uint32_t i = 1; i < fraction_digits; i++)
+        scale *= 10;
+      value /= static_cast<float>(scale);
+    }
+    return value;
+  }
+  // Exponents, hex, inf, nan, leading whitespace and longer inputs take the libc path.
+  char *end = nullptr;
+  const float value = ::strtof(str, &end);
+  if (end == str || *end != '\0' || value == HUGE_VALF)
+    return {};
+  return value;
+}
+
 size_t parse_hex(const char *str, size_t length, uint8_t *data, size_t count) {
   size_t chars = std::min(length, 2 * count);
   for (size_t i = 2 * count - chars; i < 2 * count; i++, str++) {

esphome/core/helpers.h

@@ -25,7 +25,6 @@
 #include <strings.h>
 
 #include "esphome/core/optional.h"
-#include "esphome/core/parse_float.h"
 #include "esphome/core/time_conversion.h"
 
 #ifdef USE_ESP8266
@@ -1034,26 +1033,6 @@ inline float pow10_int(int8_t exp) {
   return result;
 }
 
-/// 10^n, exact while it fits in T.
-template<typename T> constexpr T pow10_exact(uint32_t n) {
-  T result = 1;
-  T base = 10;
-  for (;;) {
-    if ((n & 1) != 0)
-      result *= base;
-    n >>= 1;
-    if (n == 0)
-      return result;
-    base *= base;
-  }
-}
-
-/// Whether c is '0' to '9'.
-constexpr bool is_digit(char c) { return static_cast<uint8_t>(c - '0') <= 9; }
-
-/// Whether c is C-locale white space, without isspace's ctype table.
-constexpr bool is_space_c(char c) { return c == ' ' || (c >= '\t' && c <= '\r'); }
-
 /// Remap \p value from the range (\p min, \p max) to (\p min_out, \p max_out).
 template<typename T, typename U> T remap(U value, U min, U max, T min_out, T max_out) {
   return (value - min) * (max_out - min_out) / (max - min) + min_out;
@@ -1594,6 +1573,8 @@ template<typename T, enable_if_t<(std::is_integral<T>::value && std::is_signed<T
 optional<T> parse_number(const std::string &str) {
   return parse_number<T>(str.c_str());
 }
+/// Parse a decimal floating-point number; plain decimals skip the libc parser.
+optional<float> parse_float(const char *str);
 /// Parse a decimal floating-point number from a null-terminated string.
 template<typename T, enable_if_t<(std::is_same<T, float>::value), int> = 0> optional<T> parse_number(const char *str) {
   return parse_float(str);

esphome/core/parse_float.cpp

@@ -1,372 +0,0 @@
-// picolibc 1.8.10's strtof, bit for bit, without libc's strtod: decimals round to 9 digits, then to the nearest float.
-// Float bits are built from integers, so chips that flush denormals give the same result.
-
-#include "esphome/core/parse_float.h"
-#include "esphome/core/hal.h"
-#include "esphome/core/helpers.h"
-
-#include <algorithm>
-#include <bit>
-
-namespace esphome {
-
-namespace {
-
-constexpr uint32_t FLOAT_SIGN_BIT = 0x80000000, FLOAT_INF_BITS = 0x7F800000;
-constexpr uint32_t FLOAT_NAN_BITS = 0x7FC00000;  // nanf(""), which strtof returns for every NaN
-
-constexpr uint32_t DECIMAL_DIGITS = 9, HEX_DIGITS = 8;  // digits kept before the rest only round
-constexpr int32_t EXPONENT_CAP = 224;  // picolibc stops adding exponent digits once the exponent reaches this
-// 0.<digits> * 10^exp10 is zero at or below MIN_EXP10 and infinity at or above MAX_EXP10, as in picolibc
-constexpr int32_t MIN_EXP10 = -46, MAX_EXP10 = 40;
-// Past this, one more digit could pass 2^24
-constexpr uint32_t PLAIN_MANTISSA_LIMIT = 1677720;
-
-// Bits of the float nearest to (m + sticky fraction) * 2^e, ties to even; m > 0
-uint32_t round_to_float_bits(uint64_t m, int32_t e, bool sticky) {
-  const int32_t msb = e + static_cast<int32_t>(std::bit_width(m)) - 1;  // the value is in [2^msb, 2^(msb + 1))
-  if (msb >= 128)
-    return FLOAT_INF_BITS;
-  if (msb < -150)  // below half the smallest float
-    return 0;
-  // The unit of the float's last bit: 2^(msb - 23), or 2^-149 for a denormal
-  const int32_t shift = std::max<int32_t>(msb - 23, -149) - e;  // at most 64
-  uint64_t q;
-  if (shift <= 0) {
-    q = m << -shift;
-  } else {
-    q = shift < 64 ? m >> shift : 0;
-    const uint64_t rem = shift < 64 ? m & ((uint64_t{1} << shift) - 1) : m;
-    const uint64_t half = uint64_t{1} << (shift - 1);
-    if (rem > half || (rem == half && (sticky || (q & 1) != 0)))
-      q++;
-  }
-  if (msb < -126)
-    return static_cast<uint32_t>(q);  // 2^23 here is the smallest normal float, as it should be
-  // Rounding up past the largest float gives exactly FLOAT_INF_BITS
-  return (static_cast<uint32_t>(msb + 127) << 23) + static_cast<uint32_t>(q - (uint64_t{1} << 23));
-}
-
-// The decimal exponents that reach decimal_to_float_bits: 1 to 9 digits and MIN_EXP10 < digits + e10 < MAX_EXP10
-constexpr int32_t MIN_E10 = MIN_EXP10 + 1 - static_cast<int32_t>(DECIMAL_DIGITS), MAX_E10 = MAX_EXP10 - 2;
-// Top 64 bits of 10^(8k), rounded down: 10^(8k) = entry * 2^(floor_log2_pow10(8k) - 63), exact for k = 0..3
-constexpr int32_t POW10_BY_8_FIRST = MIN_E10 >> 3, POW10_BY_8_LAST = MAX_E10 >> 3;
-constexpr uint64_t POW10_BY_8[] PROGMEM = {
-    0xFB158592BE068D2E, 0xBB127C53B17EC159, 0x8B61313BBABCE2C6, 0xCFB11EAD453994BA,
-    0x9ABE14CD44753B52, 0xE69594BEC44DE15B, 0xABCC77118461CEFC, 0x8000000000000000,
-    0xBEBC200000000000, 0x8E1BC9BF04000000, 0xD3C21BCECCEDA100, 0x9DC5ADA82B70B59D,
-};
-static_assert(POW10_BY_8_FIRST == -7 && POW10_BY_8_LAST == 4 &&
-                  sizeof(POW10_BY_8) / sizeof(POW10_BY_8[0]) == POW10_BY_8_LAST - POW10_BY_8_FIRST + 1,
-              "POW10_BY_8 must cover MIN_E10..MAX_E10");
-
-// floor(q * log2(10)), for |q| < 100
-constexpr int32_t floor_log2_pow10(int32_t q) { return (q * 217706) >> 16; }
-
-// The top 64 bits of a * b, rounded down
-uint64_t mul_high(uint64_t a, uint64_t b) {
-  const uint64_t a_lo = static_cast<uint32_t>(a), a_hi = a >> 32;
-  const uint64_t b_lo = static_cast<uint32_t>(b), b_hi = b >> 32;
-  const uint64_t hi_lo = a_hi * b_lo, lo_hi = a_lo * b_hi;
-  const uint64_t middle = ((a_lo * b_lo) >> 32) + static_cast<uint32_t>(hi_lo) + static_cast<uint32_t>(lo_hi);
-  return a_hi * b_hi + (hi_lo >> 32) + (lo_hi >> 32) + (middle >> 32);
-}
-
-// Cold: a decimal within 16 units of a midpoint is an exact tie when m10 * 5^e10 is an integer
-__attribute__((noinline, cold)) uint32_t tie_float_bits(uint32_t m10, int32_t e10, uint32_t bits) {
-  if (e10 >= 0) {
-    if (e10 <= 14)  // m10 * 5^14 stays below 2^64
-      return round_to_float_bits(m10 * (pow10_exact<uint64_t>(e10) >> e10), e10, false);
-  } else if (e10 >= -13) {
-    const auto pow5 = static_cast<uint32_t>(pow10_exact<uint64_t>(-e10) >> -e10);
-    if (m10 % pow5 == 0)
-      return round_to_float_bits(m10 / pow5, e10, false);
-  }
-  return bits;
-}
-
-// The float nearest to m10 * 10^e10 (0 < m10 <= 10^9). The product is under 4 units low; checked for all 85 billion
-// (m10, e10), only exact ties and one non-tie (6 units off, keeps its float) come within 34 units of a midpoint.
-uint32_t decimal_to_float_bits(uint32_t m10, int32_t e10) {
-  // Both operands are exact floats, so the one float operation gives the nearest float
-  const uint32_t power = e10 < 0 ? -e10 : e10;
-  if (m10 < (1u << 24) && power <= 10) {
-    const auto value = static_cast<float>(m10);
-    // 10^10 overflows uint32_t
-    const float factor = power == 10 ? 1e10f : static_cast<float>(pow10_exact<uint32_t>(power));
-    return bit_cast<uint32_t>(e10 < 0 ? value / factor : value * factor);
-  }
-  const int32_t k8 = e10 >> 3;  // rounds down
-  const uint64_t x = uint64_t{m10} * pow10_exact<uint32_t>(e10 & 7);
-  const auto zeros = static_cast<int32_t>(std::countl_zero(x));
-  uint64_t m = x << zeros;
-  int32_t e = -zeros;
-  if (k8 == 0)
-    return round_to_float_bits(m, e, false);  // exact
-  m = mul_high(m, POW10_BY_8[k8 - POW10_BY_8_FIRST]);
-  e += floor_log2_pow10(8 * k8) + 1;
-  if ((m >> 63) == 0) {
-    m <<= 1;
-    e--;
-  }
-  const uint32_t bits = round_to_float_bits(m, e, false);
-  // The bits below the float's last one, and the midpoint among them
-  const int32_t shift = std::max<int32_t>(40, -149 - e);
-  if (shift <= 64) {
-    const uint64_t low = shift < 64 ? m & ((uint64_t{1} << shift) - 1) : m;
-    const uint64_t half = uint64_t{1} << (shift - 1);
-    if (low - half + 16 > 32)  // |low - half| > 16
-      return bits;
-  }
-  return tie_float_bits(m10, e10, bits);
-}
-
-uint32_t no_number(const char *str, const char **end, bool *negative) {
-  *end = str;
-  *negative = false;
-  return 0;
-}
-
-// The rest of an "nan" or "inf" after its first letter at p; returns the end, or nullptr for no number
-const char *read_inf_nan(const char *p) {
-  const auto lower = [](char c) { return static_cast<char>(c | 0x20); };
-  if (lower(*p) == 'n') {
-    if (lower(p[1]) != 'a' || lower(p[2]) != 'n')
-      return nullptr;
-    p += 3;
-    if (*p != '(')
-      return p;
-    // "nan(" must be closed after letters, digits and '_'
-    do {
-      p++;
-    } while (static_cast<uint8_t>(lower(*p) - 'a') < 26 || is_digit(*p) || *p == '_');
-    return *p == ')' ? p + 1 : nullptr;
-  }
-  if (lower(p[1]) != 'n' || lower(p[2]) != 'f')
-    return nullptr;
-  p += 3;
-  if (lower(*p) != 'i')
-    return p;
-  // Past "infi", only "infinity" is a number
-  return lower(p[1]) == 'n' && lower(p[2]) == 'i' && lower(p[3]) == 't' && lower(p[4]) == 'y' ? p + 5 : nullptr;
-}
-
-// Reads a binary exponent "p" or decimal exponent "e" at p into *exp; returns the end of the number
-const char *read_exponent(const char *p, char letter, int32_t *exp) {
-  if ((*p | 0x20) != letter)
-    return p;
-  const char *q = p + 1;
-  const bool negative = *q == '-';
-  if (negative || *q == '+')
-    q++;
-  if (!is_digit(*q))
-    return p;
-  int32_t value = 0;
-  for (; is_digit(*q); q++) {
-    if (value < EXPONENT_CAP)
-      value = value * 10 + (*q - '0');
-  }
-  *exp += negative ? -value : value;
-  return q;
-}
-
-// Hex digits after the "x" at p, with the point and decimal exponent read so far (no non-zero digit yet)
-__attribute__((noinline, cold)) uint32_t read_hex(const char *p, bool dot, int32_t exp, const char **end) {
-  uint32_t m = 0, kept = 0;  // kept: digits in m from its first non-zero one
-  bool sticky = false;
-  for (;; p++) {
-    const char lower = static_cast<char>(*p | 0x20);
-    uint32_t digit = static_cast<uint8_t>(*p - '0');
-    if (static_cast<uint8_t>(lower - 'a') <= 5) {
-      digit = static_cast<uint8_t>(lower - 'a') + 10;
-    } else if (digit > 9) {
-      digit = 16;  // picolibc takes ':' to '?' as 10 to 15; we stop there like newlib
-    }
-    if (digit < 16) {
-      if (kept < HEX_DIGITS) {
-        if (dot)
-          exp--;
-        m = m * 16 + digit;
-        kept += m != 0 ? 1 : 0;
-      } else {
-        if (!dot)
-          exp++;
-        sticky |= digit != 0;
-      }
-    } else if (*p == '.' && !dot) {
-      dot = true;
-    } else if (lower != 'x' || m != 0) {  // picolibc takes another "x" while the value is still zero
-      break;
-    }
-  }
-  exp *= 4;
-  *end = read_exponent(p, 'p', &exp);
-  return m == 0 ? 0 : round_to_float_bits(m, exp, sticky);
-}
-
-// picolibc's conv_flt for a float from the first digit or point at p: returns the bits; *end is str for no number
-__attribute__((noinline)) uint32_t read_decimal(const char *str, const char *p, const char **end) {
-  uint32_t m = 0, kept = 0;  // the first (up to 9) significant digits, and how many from the first non-zero one
-  int32_t exp = 0;           // the value is m * 10^exp
-  bool dot = false, any = false;
-  uint32_t overflow = 0;  // digits past the kept ones: 0 none, 1 below half, 2 half, 3 above half
-  bool full = false;      // a digit past the kept ones was read
-  for (;; p++) {
-    const uint32_t digit = static_cast<uint8_t>(*p - '0');
-    if (digit <= 9) {
-      any = true;
-      if (kept < DECIMAL_DIGITS) {
-        if (dot)
-          exp--;
-        m = m * 10 + digit;
-        kept += m != 0 ? 1 : 0;
-      } else {
-        if (!dot)
-          exp++;
-        if (!full) {
-          full = true;
-          overflow = digit > 5 ? 3 : digit == 5 ? 2 : digit != 0 ? 1 : 0;  // the first one decides the half
-        } else {
-          overflow |= digit != 0 ? 1 : 0;
-        }
-      }
-    } else if (*p == '.' && !dot) {
-      dot = true;
-    } else {
-      break;
-    }
-  }
-  if ((*p | 0x20) == 'x' && any && m == 0)
-    return read_hex(p + 1, dot, exp, end);
-  if (!any) {
-    *end = str;
-    return 0;
-  }
-  *end = read_exponent(p, 'e', &exp);
-  if (m == 0)
-    return 0;
-  // Ties to even on the decimal digits
-  overflow |= m & 1;
-  m += (overflow + 1) >> 2;
-  const int32_t exp10 = static_cast<int32_t>(kept) + exp;
-  if (exp10 <= MIN_EXP10)
-    return 0;
-  if (exp10 >= MAX_EXP10)
-    return FLOAT_INF_BITS;
-  return decimal_to_float_bits(m, exp);
-}
-
-// picolibc's strtof from the start: returns the bits without the sign, which goes in *negative
-__attribute__((noinline)) uint32_t parse_float_full(const char *str, const char **end, bool *negative) {
-  // No number starts with a letter but i (inf) or n (nan): "unavailable", "on" and "unknown" stop here
-  const char first = static_cast<char>(*str | 0x20);
-  if (first >= 'a' && first <= 'z' && first != 'i' && first != 'n')
-    return no_number(str, end, negative);
-  const char *p = str;
-  while (is_space_c(*p))
-    p++;
-  *negative = *p == '-';
-  if (*negative || *p == '+')
-    p++;
-  const char lower = static_cast<char>(*p | 0x20);
-  if (lower == 'i' || lower == 'n') {
-    const char *stop = read_inf_nan(p);
-    if (stop == nullptr)
-      return no_number(str, end, negative);
-    *end = stop;
-    return lower == 'i' ? FLOAT_INF_BITS : FLOAT_NAN_BITS;
-  }
-  const uint32_t bits = read_decimal(str, p, end);
-  if (*end == str)
-    *negative = false;
-  return bits;
-}
-
-// A plain decimal below 2^24 with up to 9 digits after the point, in one float operation; nullptr otherwise
-ESPHOME_ALWAYS_INLINE inline const char *parse_plain_decimal(const char *str, uint32_t *bits, bool *negative) {
-  const char *p = str;
-  *negative = *p == '-';
-  if (*negative || *p == '+')
-    p++;
-  const char *digits = p;
-  const char *point = nullptr;
-  uint32_t mantissa = 0;
-  for (;; p++) {
-    const uint32_t d = static_cast<uint8_t>(*p) - '0';
-    if (d > 9) {
-      if (*p == '.' && point == nullptr) {
-        point = p;
-        continue;
-      }
-      break;
-    }
-    if (mantissa > PLAIN_MANTISSA_LIMIT)
-      return nullptr;
-    mantissa = mantissa * 10 + d;
-  }
-  const uint32_t fraction = point != nullptr ? p - point - 1 : 0;
-  const char c = static_cast<char>(*p | 0x20);
-  if (p - digits == (point != nullptr ? 1 : 0) || fraction > 9 || c == 'e' || c == 'x')
-    return nullptr;
-  float value = static_cast<float>(mantissa);
-  if (fraction != 0)
-    value /= static_cast<float>(pow10_exact<uint32_t>(fraction));  // 10^9 is an exact float
-  *bits = bit_cast<uint32_t>(value);
-  return p;
-}
-
-}  // namespace
-
-optional<float> parse_float(const char *str) {
-  // Own copy of the plain-decimal loop: sharing parse_plain_decimal costs 12 to 18% more instructions
-  const char *p = str;
-  const bool negative = *p == '-';
-  if (negative || *p == '+')
-    p++;
-  const char *digits = p;
-  const char *point = nullptr;
-  uint32_t mantissa = 0;
-  for (;; p++) {
-    const uint32_t d = static_cast<uint8_t>(*p) - '0';
-    if (d > 9) {
-      if (*p == '.' && point == nullptr) {
-        point = p;
-        continue;
-      }
-      break;
-    }
-    if (mantissa > PLAIN_MANTISSA_LIMIT)
-      break;
-    mantissa = mantissa * 10 + d;
-  }
-  const uint32_t fraction = point != nullptr ? p - point - 1 : 0;
-  if (*p == '\0' && p - digits > (point != nullptr ? 1 : 0) && fraction <= 9) {
-    float value = negative ? -static_cast<float>(mantissa) : static_cast<float>(mantissa);
-    if (fraction != 0)
-      value /= static_cast<float>(pow10_exact<uint32_t>(fraction));
-    return value;
-  }
-  const char *end;
-  bool full_negative;
-  const uint32_t bits = parse_float_full(str, &end, &full_negative);
-  // HUGE_VALF, positive overflow or "inf", is rejected like before
-  if (end == str || *end != '\0' || (!full_negative && bits == FLOAT_INF_BITS))
-    return {};
-  return bit_cast<float>(full_negative ? bits | FLOAT_SIGN_BIT : bits);
-}
-
-float str_to_float(const char *str, char **end) {
-  const char *stop;
-  bool negative;
-  uint32_t bits;
-  if (const char *plain_end = parse_plain_decimal(str, &bits, &negative)) {
-    stop = plain_end;
-  } else {
-    bits = parse_float_full(str, &stop, &negative);
-  }
-  if (end != nullptr)
-    *end = const_cast<char *>(stop);  // strtof's signature
-  return bit_cast<float>(negative ? bits | FLOAT_SIGN_BIT : bits);
-}
-
-}  // namespace esphome

esphome/core/parse_float.h

@@ -1,17 +0,0 @@
-#pragma once
-
-#include <cstdint>
-
-#include "esphome/core/optional.h"
-
-namespace esphome {
-
-/// The whole string as str_to_float's syntax (leading space, hex, inf, nan); trailing characters, "inf" and positive
-/// overflow are rejected, while -inf, negative overflow and NaN are accepted.
-optional<float> parse_float(const char *str);
-
-/// strtof with picolibc's results on every platform, but it never sets errno (overflow gives +-HUGE_VALF, underflow 0);
-/// use it instead of strtof, or strtod/atof for a float result.
-float str_to_float(const char *str, char **end);
-
-}  // namespace esphome

esphome/core/string_ref.h

@@ -7,7 +7,6 @@
 #include <memory>
 #include <string>
 #include "esphome/core/defines.h"
-#include "esphome/core/parse_float.h"
 
 #ifdef USE_JSON
 #include "esphome/components/json/json_util.h"
@@ -294,7 +293,7 @@ inline bool operator!=(const std::string &lhs, const ProgmemStringRef &rhs) { re
 #endif
 
 // String conversion functions for ADL compatibility (allows stoi(x) where x is StringRef)
-// Must be in esphome namespace for ADL to find them. Uses strtol, strtod and str_to_float to avoid heap allocation.
+// Must be in esphome namespace for ADL to find them. Uses strtol/strtod directly to avoid heap allocation.
 namespace internal {
 // NOLINTBEGIN(google-runtime-int)
 template<typename R, typename F> inline R parse_number(const StringRef &str, size_t *pos, F conv) {
@@ -335,7 +334,7 @@ inline long stol(const StringRef &str, size_t *pos = nullptr, int base = 10) {
   return internal::parse_number<long>(str, pos, base, std::strtol);
 }
 inline float stof(const StringRef &str, size_t *pos = nullptr) {
-  return internal::parse_number<float>(str, pos, str_to_float);
+  return internal::parse_number<float>(str, pos, std::strtof);
 }
 inline double stod(const StringRef &str, size_t *pos = nullptr) {
   return internal::parse_number<double>(str, pos, std::strtod);

tests/benchmarks/core/bench_parse_float.cpp

@@ -1,40 +0,0 @@
-#include <benchmark/benchmark.h>
-
-#include "esphome/core/helpers.h"
-
-namespace esphome::benchmarks {
-
-// Inner iteration count to amortize CodSpeed instrumentation overhead.
-static constexpr int kInnerIterations = 2000;
-
-static const char *const PLAIN[] = {"0.5", "255", "-12.75", "21.3"};
-static const char *const EXPONENT[] = {"1e3", "2.5e-2", "-6.02E5", "1.5e+1"};
-static const char *const PRECISE[] = {"3.14159265358979", "0.000123456789", "123456789.125", "-0.1000000000000000055"};
-// Home Assistant states that are not numbers
-static const char *const REJECT[] = {"unavailable", "unknown", "on", "off"};
-
-template<size_t N, typename F> static void run(benchmark::State &state, const char *const (&inputs)[N], F parse) {
-  for (auto _ : state) {
-    float sum = 0.0f;
-    for (int i = 0; i < kInnerIterations; i++)
-      sum += parse(inputs[i % N]);
-    benchmark::DoNotOptimize(sum);
-  }
-  state.SetItemsProcessed(state.iterations() * kInnerIterations);
-}
-
-static float parse_number_float(const char *str) { return parse_number<float>(str).value_or(0.0f); }
-
-static void ParseNumberFloat_Plain(benchmark::State &state) { run(state, PLAIN, parse_number_float); }
-BENCHMARK(ParseNumberFloat_Plain);
-
-static void ParseNumberFloat_Exponent(benchmark::State &state) { run(state, EXPONENT, parse_number_float); }
-BENCHMARK(ParseNumberFloat_Exponent);
-
-static void ParseNumberFloat_Precise(benchmark::State &state) { run(state, PRECISE, parse_number_float); }
-BENCHMARK(ParseNumberFloat_Precise);
-
-static void ParseNumberFloat_Reject(benchmark::State &state) { run(state, REJECT, parse_number_float); }
-BENCHMARK(ParseNumberFloat_Reject);
-
-}  // namespace esphome::benchmarks

tests/components/climate_ir/climate_ir_code_test.cpp

@@ -0,0 +1,43 @@
+#include <gtest/gtest.h>
+#include "esphome/components/climate_ir/climate_ir.h"
+
+namespace esphome::climate_ir::testing {
+
+static constexpr IRCode FANS[] PROGMEM = {
+    {climate::CLIMATE_FAN_AUTO, 0x10},
+    {climate::CLIMATE_FAN_LOW, 0x20},
+    {climate::CLIMATE_FAN_HIGH, 0x30},
+};
+
+TEST(ClimateIRCodeTest, FindByValue) {
+  const auto entry = find_ir_code(FANS, climate::CLIMATE_FAN_LOW, false);
+  ASSERT_TRUE(entry.has_value());
+  EXPECT_EQ(entry->value, climate::CLIMATE_FAN_LOW);
+  EXPECT_EQ(entry->code, 0x20);
+}
+
+TEST(ClimateIRCodeTest, FindByCode) {
+  const auto entry = find_ir_code(FANS, 0x30, true);
+  ASSERT_TRUE(entry.has_value());
+  EXPECT_EQ(entry->value, climate::CLIMATE_FAN_HIGH);
+}
+
+TEST(ClimateIRCodeTest, FindMissing) {
+  EXPECT_FALSE(find_ir_code(FANS, climate::CLIMATE_FAN_MEDIUM, false).has_value());
+  // A code that is also a listed value must not match when looking up codes
+  EXPECT_FALSE(find_ir_code(FANS, climate::CLIMATE_FAN_LOW, true).has_value());
+}
+
+TEST(ClimateIRCodeTest, ToCode) {
+  EXPECT_EQ(to_ir_code(FANS, climate::CLIMATE_FAN_HIGH, 0x00), 0x30);
+  EXPECT_EQ(to_ir_code(FANS, climate::CLIMATE_FAN_MEDIUM, 0x00), 0x00);
+}
+
+TEST(ClimateIRCodeTest, FromCode) {
+  EXPECT_EQ(from_ir_code(FANS, 0x20, climate::CLIMATE_FAN_AUTO), climate::CLIMATE_FAN_LOW);
+  EXPECT_EQ(from_ir_code(FANS, 0x99, climate::CLIMATE_FAN_AUTO), climate::CLIMATE_FAN_AUTO);
+  // The current state as the fallback leaves it unchanged on an unknown code
+  EXPECT_EQ(from_ir_code(FANS, 0x99, climate::CLIMATE_FAN_MEDIUM), climate::CLIMATE_FAN_MEDIUM);
+}
+
+}  // namespace esphome::climate_ir::testing

tests/components/core/test_parse_float.cpp

@@ -1,74 +1,34 @@
 #include <gtest/gtest.h>
 
-#include <cmath>
 #include <cstdint>
 #include <cstdio>
 #include <cstdlib>
 #include <cstring>
-#include <random>
 #include <string>
 
 #include "esphome/core/helpers.h"
-#include "esphome/core/parse_float.h"
 
-#ifdef USE_HOST
 namespace esphome::core::testing {
 
-static uint32_t bits(float value) { return bit_cast<uint32_t>(value); }
-
-// picolibc rounds a decimal to 9 significant digits and converts those to the nearest float, so up to 9
-// significant digits its result is the correctly rounded float the host's strtof (glibc, macOS) gives. Longer
-// input and the syntax where libcs differ are checked against values taken from picolibc 1.8.10's own strtof.
-static float reference_strtof(const char *str, char **end) {
-  const float value = ::strtof(str, end);
-  if (std::isnan(value))
-    return std::signbit(value) ? -NAN : NAN;
-  return value;
+static uint32_t bits(float value) {
+  uint32_t out;
+  memcpy(&out, &value, sizeof(out));
+  return out;
 }
 
-// Every accepted input must give the reference's bits.
+// strtof is the reference: every accepted input must give the same bits.
 static void expect_matches_strtof(const char *str) {
-  const float expected = reference_strtof(str, nullptr);
+  char *end = nullptr;
+  const float expected = ::strtof(str, &end);
   const auto parsed = parse_number<float>(str);
   if (!parsed.has_value()) {
     ADD_FAILURE() << str << " was rejected";
     return;
   }
-  EXPECT_EQ(bits(parsed.value()), bits(expected)) << str;
+  const float actual = parsed.value();
+  EXPECT_EQ(bits(actual), bits(expected)) << str << " parsed " << actual << " expected " << expected;
 }
 
-// The same bits and end as the host's strtof; for decimals of up to 9 significant digits
-static void expect_str_to_float_matches(const char *str) {
-  char *expected_end = nullptr;
-  const float expected = reference_strtof(str, &expected_end);
-  char *end = nullptr;
-  const float actual = str_to_float(str, &end);
-  EXPECT_EQ(bits(actual), bits(expected)) << '"' << str << '"';
-  EXPECT_EQ(end - str, expected_end - str) << '"' << str << '"';
-}
-
-struct PicolibcCase {
-  const char *str;
-  uint32_t bits;
-  int32_t end;
-};
-
-// Bits and end from picolibc 1.8.10's strtof
-static void expect_picolibc(const PicolibcCase &c) {
-  char *end = nullptr;
-  const float value = str_to_float(c.str, &end);
-  EXPECT_EQ(bits(value), c.bits) << '"' << c.str << '"';
-  EXPECT_EQ(end - c.str, c.end) << '"' << c.str << '"';
-}
-
-static void expect_picolibc(const std::string &str, uint32_t expected) {
-  char *end = nullptr;
-  EXPECT_EQ(bits(str_to_float(str.c_str(), &end)), expected) << str.substr(0, 40);
-  EXPECT_EQ(static_cast<size_t>(end - str.c_str()), str.size()) << str.substr(0, 40);
-}
-
-static float float_from(uint32_t value) { return bit_cast<float>(value); }
-
 TEST(ParseFloat, PlainDecimalsMatchStrtof) {
   for (const char *str :
        {"0",     "-0",      "+0",        "1",        "-1",          "100.50",      "99.75",       "0.1", "0.3",
@@ -86,14 +46,6 @@ TEST(ParseFloat, SweepOfTwoDecimalValuesMatchesStrtof) {
   }
 }
 
-// Eight-digit mantissas below 2^24 stay on the one-division path; the next digit past the limit falls back
-TEST(ParseFloat, EightDigitPlainDecimalsMatchStrtof) {
-  for (const char *str : {"12345678", "-12345678", "1234.5678", "0.12345678", "16777209", "1677720.9", "0.16777209",
-                          "16777210", "16777215", "1677721.5", "99999999", "9999999.9", "16777209."}) {
-    expect_matches_strtof(str);
-  }
-}
-
 // A fraction longer than the fast path accepts must fall back, however long it is.
 TEST(ParseFloat, LongFractionsMatchStrtof) {
   std::string str = "0.";
@@ -116,293 +68,10 @@ TEST(ParseFloat, LibcPathInputsMatchStrtof) {
 // Positive overflow and a positive literal infinity both come back as HUGE_VALF from strtof, and the parser
 // rejects both; the negative forms pass through, as they did before the fast path.
 TEST(ParseFloat, RejectsInvalidInput) {
-  for (const char *str : {"", "-", "+", ".", "abc", "12abc", "1.2.3", "1,5", "12 ", "--1", "1e", "1e400", "inf",
-                          "infinity", "infi", "nan(12 ab)", "nan(12"}) {
+  for (const char *str :
+       {"", "-", "+", ".", "abc", "12abc", "1.2.3", "1,5", "12 ", "--1", "1e", "1e400", "inf", "infinity"}) {
     EXPECT_FALSE(parse_number<float>(str).has_value()) << str;
   }
 }
 
-// Above the midpoint 1 + 2^-24 by less than half a double: newlib's strtof rounds to the midpoint and then to
-// 1.0f; picolibc's 9 digits, 1.00000006, give the next float.
-TEST(ParseFloat, FullPathRoundsLikePicolibc) {
-  EXPECT_EQ(bits(parse_number<float>("1.0000000596046448").value()), 0x3F800001u);
-  EXPECT_EQ(bits(parse_number<float>("-1.0000000596046448").value()), 0xBF800001u);
-}
-
-// picolibc takes "nan(" with letters, digits and '_' up to a ")", and nothing at all otherwise
-TEST(ParseFloat, NanForms) {
-  EXPECT_TRUE(std::isnan(parse_number<float>("nan(12)").value()));
-  EXPECT_TRUE(std::isnan(parse_number<float>("nan(xyz_1)").value()));
-  EXPECT_FALSE(parse_number<float>("nan(x y)").has_value());
-}
-
-// The callers' overflow check: a positive overflow is HUGE_VALF and rejected, a negative one is -inf and accepted
-TEST(ParseFloat, OverflowIsHugeValf) {
-  EXPECT_FALSE(parse_number<float>("1e39").has_value());
-  EXPECT_FALSE(parse_number<float>("3.40282357e38").has_value());
-  EXPECT_FALSE(parse_number<float>("1e99999").has_value());
-  EXPECT_EQ(bits(parse_number<float>("-1e39").value()), 0xFF800000u);
-  EXPECT_EQ(bits(parse_number<float>("3.4028235e38").value()), 0x7F7FFFFFu);
-}
-
-// Up to 9 significant digits, with leading and trailing zeros, a point anywhere and an exponent
-TEST(StrToFloat, RandomDecimalsMatchStrtof) {
-  std::mt19937_64 rng(1);  // NOLINT(cert-msc32-c,cert-msc51-cpp,bugprone-random-generator-seed) reproducible
-  for (int i = 0; i < 50000; i++) {
-    std::string str;
-    if (rng() % 3 == 0)
-      str += (rng() & 1) ? "-" : "+";
-    const int zeros = static_cast<int>(rng() % 4);
-    const int significant = 1 + static_cast<int>(rng() % 9);
-    const int trailing = static_cast<int>(rng() % 4);
-    std::string digits(zeros, '0');
-    digits += static_cast<char>('1' + rng() % 9);
-    for (int j = 1; j < significant; j++)
-      digits += static_cast<char>('0' + rng() % 10);
-    digits.append(trailing, '0');
-    const int point = static_cast<int>(rng() % (digits.size() + 2)) - 1;
-    for (int j = 0; j < static_cast<int>(digits.size()); j++) {
-      if (j == point)
-        str += '.';
-      str += digits[j];
-    }
-    if (rng() & 1) {
-      str += (rng() & 1) ? 'e' : 'E';
-      char exp[8];
-      snprintf(exp, sizeof(exp), "%d", static_cast<int>(rng() % 110) - 60);
-      str += exp;
-    }
-    expect_str_to_float_matches(str.c_str());
-  }
-}
-
-// Every 16411th float, printed with 6 and 9 digits
-TEST(StrToFloat, FloatsMatchStrtof) {
-  char buf[64];
-  for (uint32_t u = 0; u < 0x7F800000; u += 16411) {
-    for (int precision : {6, 9}) {
-      snprintf(buf, sizeof(buf), "%.*e", precision - 1, static_cast<double>(float_from(u)));
-      expect_str_to_float_matches(buf);
-    }
-  }
-}
-
-TEST(StrToFloat, SyntaxMatchesStrtof) {
-  // Tokens whose combinations the libcs read alike: no "x", "nan(" or "infi"
-  static const char *const TOKENS[] = {"0", "1", "9", ".", "e", "E", "+", "-", "a", "N", " ", "\t", "y", "00", "#", ""};
-  for (const char *a : TOKENS) {
-    for (const char *b : TOKENS) {
-      for (const char *c : TOKENS) {
-        for (const char *d : TOKENS) {
-          const std::string str = std::string(a) + b + c + d;
-          expect_str_to_float_matches(str.c_str());
-        }
-      }
-    }
-  }
-}
-
-// Where newlib and glibc read the text differently from picolibc
-TEST(StrToFloat, SyntaxMatchesPicolibc) {
-  static const PicolibcCase CASES[] = {
-      // "x" after any zero digits starts hex, even after a point or a second "0x"
-      {"000x", 0x00000000, 4},
-      {"0x", 0x00000000, 2},
-      {"-0x", 0x80000000, 3},
-      {"00x1", 0x3F800000, 4},
-      {"0x0x1", 0x3F800000, 5},
-      {"0.0x1", 0x3B800000, 5},
-      {".x1", 0x00000000, 0},
-      {"0x.p1", 0x00000000, 5},
-      {"0x.8", 0x3F000000, 4},
-      {"0X1.8", 0x3FC00000, 5},
-      {"0x1P-1", 0x3F000000, 6},
-      {"0x1p+", 0x3F800000, 3},
-      {"1x5", 0x3F800000, 1},
-      // "inf" stops before anything but "i"; past "infi" only "infinity" is a number
-      {"inf", 0x7F800000, 3},
-      {"-inf", 0xFF800000, 4},
-      {"INFINITY", 0x7F800000, 8},
-      {"+infi0", 0x00000000, 0},
-      {"infi", 0x00000000, 0},
-      {"infinit", 0x00000000, 0},
-      // "nan(" takes letters, digits and '_' up to ")", and is no number without the ")"
-      {"NaN", 0x7FC00000, 3},
-      {"nan()", 0x7FC00000, 5},
-      {"nan(xyz)", 0x7FC00000, 8},
-      {"nan(_a1)", 0x7FC00000, 8},
-      {"-nan(1)", 0xFFC00000, 7},
-      {"nan( )", 0x00000000, 0},
-      {"nan(12 ab)", 0x00000000, 0},
-      {"nan(12", 0x00000000, 0},
-      // An exponent needs a digit
-      {"1e", 0x3F800000, 1},
-      {"1e+", 0x3F800000, 1},
-      {"1e-x", 0x3F800000, 1},
-      {"\t 12", 0x41400000, 4},
-      {"- 1", 0x00000000, 0},
-      {"1.2.3", 0x3F99999A, 3},
-  };
-  for (const PicolibcCase &c : CASES)
-    expect_picolibc(c);
-}
-
-// The inputs where newlib's strtof (decimal to double to float) and picolibc's were found to differ; every platform
-// now gives picolibc's result, which is also the correctly rounded float for these
-TEST(StrToFloat, RoundsLikePicolibcWhereNewlibDoubleRounds) {
-  expect_picolibc({"1.0000000596046448", 0x3F800001, 18});
-  expect_picolibc({"0x1.100b0d0000000c", 0x3F880587, 18});
-  expect_picolibc("1.000000059604644775390625" + std::string(800, '0') + "1", 0x3F800001);
-}
-
-// picolibc rounds a decimal to 9 significant digits, ties to even, before converting it: past 9 digits its float can
-// be one away from the nearest, and an exact tie between two floats can round up. Values from picolibc.
-TEST(StrToFloat, NineDigitRoundingLikePicolibc) {
-  static const PicolibcCase CASES[] = {
-      {"1.0856183295439e10", 0x5021C50E, 18},          // nearest 0x5021C50D
-      {"3.97496754550e-4", 0x39D0671D, 16},            // nearest 0x39D0671C
-      {"9.76178673657108930e23", 0x674EB6C1, 22},      // nearest 0x674EB6C0
-      {"156.6562236e-26", 0x17F269ED, 15},             // nearest 0x17F269EC
-      {"1.000000059604644775390625", 0x3F800001, 26},  // the tie 1 + 2^-24: nearest-even 0x3F800000
-      {"1.000000059", 0x3F800001, 11},                 // 1.00000006 after rounding
-      {"7.0064923216240854e-46", 0x00000000, 22},      // 7.00649232e-46, below half the smallest float
-      {"21.299999999999997", 0x41AA6666, 18},
-      {"0.30000000000000004", 0x3E99999A, 19},
-      {"0.1000000000000000055511151231257827", 0x3DCCCCCD, 36},
-  };
-  for (const PicolibcCase &c : CASES)
-    expect_picolibc(c);
-}
-
-// Nine digits converted exactly: ties to even between floats, where the 64-bit product cannot decide alone
-TEST(StrToFloat, NineDigitTiesGoToEven) {
-  static const PicolibcCase CASES[] = {
-      {"16777217", 0x4B800000, 8},  {"16777219", 0x4B800002, 8},    {"16777217.0", 0x4B800000, 10},
-      {"8388608.5", 0x4B000000, 9}, {"8388609.5", 0x4B000002, 9},   {"3e10", 0x50DF8476, 4},
-      {"5e10", 0x513A43B7, 4},      {"1.00000006", 0x3F800001, 10},
-  };
-  for (const PicolibcCase &c : CASES)
-    expect_picolibc(c);
-}
-
-// RP2350 flushes float denormals in its double to float conversion; #22677 bench. The parser builds the bits
-// with integer operations, so every denormal parses to its own value.
-TEST(StrToFloat, DenormalsParseWithoutFlushing) {
-  char buf[64];
-  const auto check = [&buf](uint32_t k) {
-    snprintf(buf, sizeof(buf), "%.8e", std::ldexp(static_cast<double>(k), -149));
-    EXPECT_EQ(bits(str_to_float(buf, nullptr)), k) << buf;
-  };
-  for (uint32_t k = 0; k <= 0x800000; k += 4099)
-    check(k);
-  // The largest denormal and FLT_MIN, where rounding carries into the exponent
-  for (uint32_t k : {1u, 2u, 0x7FFFFEu, 0x7FFFFFu, 0x800000u})
-    check(k);
-}
-
-// Pico W and Pico 2 W bench, #22677: the RP2040 and RP2350 libcs flush float denormals to 0 in their double to
-// float conversion, and the RP2040 one turns a NaN into +infinity
-TEST(StrToFloat, Rp2040LibcFlushesAndNanToInfinity) {
-  static const PicolibcCase CASES[] = {
-      {"1e-40", 0x000116C2, 5},          {"1.4e-45", 0x00000001, 7},  {"1e-38", 0x006CE3EE, 5},
-      {"1.1754942e-38", 0x007FFFFF, 13}, {"0x1p-149", 0x00000001, 8}, {"1.17549435e-38", 0x00800000, 14},
-      {"nan(12)", 0x7FC00000, 7},        {"nan", 0x7FC00000, 3},
-  };
-  for (const PicolibcCase &c : CASES)
-    expect_picolibc(c);
-}
-
-// RP2350 bench: libc returned 0 and the first parser stalled stepping up from a flushed guess; #22677 bench
-TEST(StrToFloat, DenormalsAndFltMinMatchStrtof) {
-  for (const char *str : {"1.4e-45", "-1.4e-45", "1e-40", "1e-38", "1.17549435e-38", "1.1754942e-38", "1.17549421e-38",
-                          "1.1754945e-38", "7.0064923e-46", "7.0064924e-46"}) {
-    expect_str_to_float_matches(str);
-  }
-}
-
-// Home Assistant's non-numeric states; CodSpeed HomeassistantSensor_StateResponse_Unavailable on #22677
-TEST(StrToFloat, NonNumericStatesAreRejected) {
-  for (const char *str : {"unavailable", "unknown", "on", "off", "", "-", ".", "none", "inactive"}) {
-    expect_str_to_float_matches(str);
-    EXPECT_FALSE(parse_number<float>(str).has_value()) << str;
-  }
-}
-
-// The one float operation path takes up to 2^24 - 1 and 10^10; #22677 review
-TEST(StrToFloat, PlainPathBoundaries) {
-  for (const char *top : {"16777215", "16777216", "16777217"}) {
-    for (const char *exp : {"e10", "e-10", "e11", "e-11", "e9", "e-9", ".5", ".25"}) {
-      const std::string str = std::string(top) + exp;
-      expect_str_to_float_matches(str.c_str());
-    }
-  }
-}
-
-// The midpoint between FLT_MAX and 2^128 rounds to infinity; review
-TEST(StrToFloat, OverflowMidpoint) {
-  expect_picolibc({"340282356779733661637539395458142568448", 0x7F800000, 39});
-  expect_picolibc({"3.40282356e38", 0x7F7FFFFF, 13});
-  expect_picolibc({"3.40282357e38", 0x7F800000, 13});
-  EXPECT_EQ(bits(str_to_float("0x1.ffffffp127", nullptr)), 0x7F800000u);
-}
-
-// picolibc stops adding exponent digits at 224, so the digits of the mantissa can move it no further
-TEST(StrToFloat, HugeExponents) {
-  for (const char *str : {"1e-99999", "1e99999", "-1e99999", "0e99999", "1e9999999999999999999",
-                          "1e-9999999999999999999", "1e-999999999999", "0.000e99999", "1e224", "1e2240", "1e-2240"}) {
-    expect_str_to_float_matches(str);
-  }
-  // 10^-3000 * 10^3000 is 1, but the exponent counts only as 300
-  expect_picolibc("0." + std::string(2999, '0') + "1e3000", 0x00000000);
-  expect_picolibc("1" + std::string(300, '0') + "e-300", 0x3F800000);
-}
-
-TEST(StrToFloat, LongMantissas) {
-  expect_picolibc("1" + std::string(799, '0') + "e-799", 0x3F800000);
-  expect_picolibc("1." + std::string(3000, '0') + "1e-3001", 0x00000000);
-  expect_picolibc("0." + std::string(400, '0') + "34028235" + std::string(500, '7') + "e440", 0x7F800000);
-  expect_picolibc(std::string(300, '9') + "e-261", 0x7F800000);
-  expect_picolibc("3" + std::string(799, '7') + "e-761", 0x7F800000);
-}
-
-// picolibc takes ':' to '?' as hex digits 10 to 15 ("0x1:" is 26); these stop at them, as newlib does. #22677 review
-TEST(StrToFloat, HexStopsAtPunctuationAfterNine) {
-  struct Case {
-    const char *str;
-    uint32_t bits;
-    int32_t end;
-  };
-  const Case cases[] = {
-      {"0x1:", 0x3F800000, 3}, {"0x1;", 0x3F800000, 3}, {"0x1<", 0x3F800000, 3},  {"0x1=", 0x3F800000, 3},
-      {"0x1>", 0x3F800000, 3}, {"0x1?", 0x3F800000, 3}, {"0x1.:", 0x3F800000, 4}, {"0x:", 0x00000000, 2},
-      {"0x9?", 0x41100000, 3}, {"0xA:", 0x41200000, 3},
-  };
-  for (const auto &c : cases) {
-    char *end = nullptr;
-    const float value = str_to_float(c.str, &end);
-    EXPECT_EQ(bits(value), c.bits) << '"' << c.str << '"';
-    EXPECT_EQ(end - c.str, c.end) << '"' << c.str << '"';
-    EXPECT_FALSE(parse_number<float>(c.str).has_value()) << c.str;
-  }
-}
-
-TEST(StrToFloat, HexDenormalsAndOverflow) {
-  struct Case {
-    const char *str;
-    uint32_t bits;
-  };
-  static const Case CASES[] = {
-      {"0x1p-149", 0x00000001},         {"0x1p-150", 0x00000000},
-      {"0x1.8p-149", 0x00000002},       {"0x1.fffffcp-127", 0x007FFFFF},
-      {"0x1.fffffep-127", 0x00800000},  {"-0x1p-149", 0x80000001},
-      {"0x1p128", 0x7F800000},          {"0x1.fffffep127", 0x7F7FFFFF},
-      {"0x1.fffffefp127", 0x7F7FFFFF},  {"0x1.0000000000001p-150", 0x00000001},
-      {"0x1.000001p0", 0x3F800000},     {"0x1.000003p0", 0x3F800002},
-      {"0x1p-99999999999", 0x00000000}, {"0x1p99999999999", 0x7F800000},
-  };
-  for (const Case &c : CASES)
-    EXPECT_EQ(bits(str_to_float(c.str, nullptr)), c.bits) << c.str;
-}
-
 }  // namespace esphome::core::testing
-#endif  // USE_HOST

tests/components/ethernet_info/test.esp32-idf.yaml

@@ -2,3 +2,7 @@ packages:
   i2c: !include ../../test_build_components/common/i2c/esp32-idf.yaml
 
 <<: !include common.yaml
+
+# IPv6 with an IP sensor: compiles the IPv6 event handler's listener notification
+network:
+  enable_ipv6: true

tests/components/whirlpool/__init__.py

@@ -10,7 +10,8 @@ def override_manifest(manifest: ComponentManifestOverride) -> None:
     manifest.auto_load = ["climate_ir", "climate"]
 
     async def to_code_testing(config: ConfigType) -> None:
-        # Compiles in the Hisense ARG model, which climate.py adds only when it is configured
+        # Compiles in the Hisense ARG and Hitachi models, which climate.py adds only when configured
         cg.add_define("USE_WHIRLPOOL_HISENSE_ARG")
+        cg.add_define("USE_WHIRLPOOL_HITACHI_HCRA31NEWH")
 
     manifest.to_code = to_code_testing

tests/components/whirlpool/common.yaml

@@ -8,3 +8,8 @@ climate:
     model: HISENSE_ARG
     transmitter_id: xmitr
     receiver_id: rcvr
+  - platform: whirlpool
+    name: Whirlpool Hitachi HCRA31NEWH Climate
+    model: HITACHI_HCRA31NEWH
+    transmitter_id: xmitr
+    receiver_id: rcvr

tests/components/whirlpool/whirlpool_tests.cpp

@@ -252,6 +252,9 @@ TEST(WhirlpoolHisenseArg, SwingIsSentOnEveryTransmit) {
 
 TEST(WhirlpoolDG11J13A, SwingIsSentOnlyWhenItChanges) {
   Fixture f(MODEL_DG11J1_3A);
+  f.command(climate::CLIMATE_MODE_COOL, 24, climate::CLIMATE_FAN_LOW, climate::CLIMATE_SWING_OFF);
+  EXPECT_EQ(f.last_frame()[2] & 0x80, 0) << "swing is already off";
+
   f.command(climate::CLIMATE_MODE_COOL, 24, climate::CLIMATE_FAN_LOW, climate::CLIMATE_SWING_VERTICAL);
   Frame frame = f.last_frame();
   EXPECT_EQ(frame[2] & 0x80, 0x80);
@@ -261,6 +264,9 @@ TEST(WhirlpoolDG11J13A, SwingIsSentOnlyWhenItChanges) {
   frame = f.last_frame();
   EXPECT_EQ(frame[2] & 0x80, 0);
   EXPECT_EQ(frame[8], 0x00);
+
+  f.command(climate::CLIMATE_MODE_COOL, 25, climate::CLIMATE_FAN_LOW, climate::CLIMATE_SWING_VERTICAL);
+  EXPECT_EQ(f.last_frame()[2] & 0x80, 0) << "swing is already vertical";
 }
 
 // Cool 24 C (step 8), fan low, powered on assumed
@@ -385,4 +391,90 @@ TEST(WhirlpoolHisenseArg, EveryTransmitHasValidChecksums) {
   }
 }
 
+// Cool 24 C (step 8), fan low, unit on
+static Frame hitachi_cool_frame() {
+  return with_checksums({0xA9, 0x59, 0x03, 0x82, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x20,
+                         0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x38, 0x08, 0x00});
+}
+
+// The off frame: power bit, cool code, byte 15 0x01 and byte 18 0x28
+static Frame hitachi_off_frame() {
+  return with_checksums({0xA9, 0x59, 0x07, 0x82, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x20,
+                         0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x28, 0x08, 0x00});
+}
+
+TEST(WhirlpoolHitachiHCRA31NEWH, CoolAndOffMatchKnownFrames) {
+  Fixture f(MODEL_HITACHI_HCRA31NEWH);
+  f.command(climate::CLIMATE_MODE_COOL, 24, climate::CLIMATE_FAN_LOW);
+  // Turning on sends the full state with no power bit
+  expect_frame(f.last_frame(), hitachi_cool_frame());
+
+  f.command(climate::CLIMATE_MODE_OFF, 24, climate::CLIMATE_FAN_LOW);
+  expect_frame(f.last_frame(), hitachi_off_frame());
+
+  // A second off command still sends the power bit
+  f.command(climate::CLIMATE_MODE_OFF, 24, climate::CLIMATE_FAN_LOW);
+  EXPECT_EQ(f.last_frame()[2] & 0x04, 0x04);
+
+  f.command(climate::CLIMATE_MODE_HEAT, 24, climate::CLIMATE_FAN_LOW);
+  const Frame frame = f.last_frame();
+  EXPECT_EQ(frame[2] & 0x04, 0);
+  EXPECT_EQ(frame[3], 0x80);
+  EXPECT_EQ(frame[15], 0x06);
+  EXPECT_EQ(frame[18], 0x38);
+}
+
+TEST(WhirlpoolHitachiHCRA31NEWH, ReceivePowerIsAState) {
+  Fixture f(MODEL_HITACHI_HCRA31NEWH);
+  ASSERT_EQ(f.climate.mode, climate::CLIMATE_MODE_OFF);
+
+  // An on frame restores the mode even though it has no power bit
+  EXPECT_TRUE(receive(f.climate, hitachi_cool_frame()));
+  EXPECT_EQ(f.climate.mode, climate::CLIMATE_MODE_COOL);
+  EXPECT_FLOAT_EQ(f.climate.target_temperature, 24);
+  EXPECT_EQ(f.climate.fan_mode, climate::CLIMATE_FAN_LOW);
+  // The same frame again keeps it on
+  EXPECT_TRUE(receive(f.climate, hitachi_cool_frame()));
+  EXPECT_EQ(f.climate.mode, climate::CLIMATE_MODE_COOL);
+
+  EXPECT_TRUE(receive(f.climate, hitachi_off_frame()));
+  EXPECT_EQ(f.climate.mode, climate::CLIMATE_MODE_OFF);
+  // A repeated off frame does not toggle
+  EXPECT_TRUE(receive(f.climate, hitachi_off_frame()));
+  EXPECT_EQ(f.climate.mode, climate::CLIMATE_MODE_OFF);
+}
+
+TEST(WhirlpoolHitachiHCRA31NEWH, ReceiveChecksRemoteId) {
+  Fixture hitachi(MODEL_HITACHI_HCRA31NEWH);
+  EXPECT_FALSE(receive(hitachi.climate, hisense_cool_frame()));
+  Fixture whirlpool(MODEL_DG11J1_91);
+  EXPECT_FALSE(receive(whirlpool.climate, hitachi_cool_frame()));
+}
+
+TEST(WhirlpoolHitachiHCRA31NEWH, ReceivedTemperatureIsClamped) {
+  Fixture f(MODEL_HITACHI_HCRA31NEWH);
+  Frame frame = hitachi_cool_frame();
+  frame[3] = 0xF2;  // step 15 would be 31 C
+  EXPECT_TRUE(receive(f.climate, with_checksums(frame)));
+  EXPECT_FLOAT_EQ(f.climate.target_temperature, 30);
+}
+
+TEST(WhirlpoolDG11J13A, TargetIsClampedAndRoundedToWhatWasSent) {
+  Fixture f(MODEL_DG11J1_3A);
+  f.command(climate::CLIMATE_MODE_COOL, 35, climate::CLIMATE_FAN_LOW);
+  EXPECT_FLOAT_EQ(f.climate.target_temperature, 32);
+  f.command(climate::CLIMATE_MODE_COOL, 24.4f, climate::CLIMATE_FAN_LOW);
+  EXPECT_FLOAT_EQ(f.climate.target_temperature, 24);
+}
+
+TEST(WhirlpoolHitachiHCRA31NEWH, ReceiveRejectsShortFrame) {
+  Fixture f(MODEL_HITACHI_HCRA31NEWH);
+  remote_base::RawTimings raw = waveform(hitachi_cool_frame());
+  // Cut after the second divider: 14 bytes, no footer
+  raw.resize(2 + 14 * 16 + 2 * 2);
+  remote_base::RemoteReceiveData data(raw, 25, remote_base::TOLERANCE_MODE_PERCENTAGE);
+  EXPECT_FALSE(static_cast<remote_base::RemoteReceiverListener &>(f.climate).on_receive(data));
+  EXPECT_EQ(f.climate.mode, climate::CLIMATE_MODE_OFF);
+}
+
 }  // namespace esphome::whirlpool::testing

tests/integration/fixtures/external_components/reboot_hook_recorder/__init__.py

@@ -0,0 +1,23 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_NAME
+from esphome.types import ConfigType
+
+CODEOWNERS = ["@esphome/tests"]
+MULTI_CONF = True
+
+reboot_hook_recorder_ns = cg.esphome_ns.namespace("reboot_hook_recorder")
+RebootHookRecorder = reboot_hook_recorder_ns.class_("RebootHookRecorder", cg.Component)
+
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(): cv.declare_id(RebootHookRecorder),
+        cv.Required(CONF_NAME): cv.string,
+    }
+).extend(cv.COMPONENT_SCHEMA)
+
+
+async def to_code(config: ConfigType) -> None:
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    cg.add(var.set_name(config[CONF_NAME]))

tests/integration/fixtures/external_components/reboot_hook_recorder/reboot_hook_recorder.cpp

@@ -0,0 +1,10 @@
+#include "reboot_hook_recorder.h"
+#include "esphome/core/log.h"
+
+namespace esphome::reboot_hook_recorder {
+
+ESPHOME_LOG_TAG(TAG, "reboot_hook_recorder");
+
+void RebootHookRecorder::record_(const char *hook) { ESP_LOGI(TAG, "HOOK %s %s", this->name_, hook); }
+
+}  // namespace esphome::reboot_hook_recorder

tests/integration/fixtures/external_components/reboot_hook_recorder/reboot_hook_recorder.h

@@ -0,0 +1,33 @@
+#pragma once
+
+#include "esphome/core/component.h"
+
+namespace esphome::reboot_hook_recorder {
+
+/// Logs every shutdown lifecycle hook it receives, so a test can check their order.
+class RebootHookRecorder : public Component {
+ public:
+  void set_name(const char *name) { this->name_ = name; }
+
+  void on_safe_shutdown() override { this->record_("on_safe_shutdown"); }
+  void on_shutdown() override { this->record_("on_shutdown"); }
+  // Needs a second call to finish, like a component waiting for a connection to close
+  bool teardown() override {
+    if (++this->teardown_calls_ < 2) {
+      this->record_("teardown_pending");
+      return false;
+    }
+    if (this->teardown_calls_ == 2)
+      this->record_("teardown_done");
+    return true;
+  }
+  void on_powerdown() override { this->record_("on_powerdown"); }
+
+ protected:
+  void record_(const char *hook);
+
+  const char *name_{""};
+  uint8_t teardown_calls_{0};
+};
+
+}  // namespace esphome::reboot_hook_recorder

tests/integration/fixtures/reboot_hook_order_forced.yaml

@@ -0,0 +1,19 @@
+esphome:
+  name: reboot-hooks-forced
+host:
+logger:
+  level: DEBUG
+api:
+  # Reboot once the test has connected, so that it sees every hook
+  on_client_connected:
+    - delay: 100ms
+    - lambda: App.reboot();
+
+external_components:
+  - source:
+      type: local
+      path: EXTERNAL_COMPONENT_PATH
+
+reboot_hook_recorder:
+  - name: first
+  - name: second

tests/integration/fixtures/reboot_hook_order_safe.yaml

@@ -0,0 +1,19 @@
+esphome:
+  name: reboot-hooks-safe
+host:
+logger:
+  level: DEBUG
+api:
+  # Reboot once the test has connected, so that it sees every hook
+  on_client_connected:
+    - delay: 100ms
+    - lambda: App.safe_reboot();
+
+external_components:
+  - source:
+      type: local
+      path: EXTERNAL_COMPONENT_PATH
+
+reboot_hook_recorder:
+  - name: first
+  - name: second

tests/integration/test_reboot_hook_order.py

@@ -0,0 +1,80 @@
+"""Test the order of the shutdown lifecycle hooks on a forced and on a safe reboot."""
+
+import re
+
+import pytest
+
+from .log_utils import LineWaiter
+from .types import APIClientConnectedFactory, RunCompiledFunction
+from .wait_utils import wait_or_fail
+
+HOOK_PATTERN = re.compile(r"HOOK (\w+) (\w+)")
+# Hooks run in reverse component order, so "first" gets each hook last.
+LAST_HOOK = "HOOK first on_powerdown"
+
+
+async def _record_reboot_hooks(
+    yaml_config: str,
+    run_compiled: RunCompiledFunction,
+    api_client_connected: APIClientConnectedFactory,
+) -> list[tuple[str, str]]:
+    """Connect, which makes the device reboot, and return its (component, hook) calls in order."""
+    waiter = LineWaiter()
+    hooks: list[tuple[str, str]] = []
+
+    def on_line(line: str) -> None:
+        if match := HOOK_PATTERN.search(line):
+            hooks.append((match[1], match[2]))
+        waiter.callback(line)
+
+    async with (
+        run_compiled(yaml_config, line_callback=on_line),
+        api_client_connected(),
+    ):
+        await wait_or_fail(
+            waiter.wait_for(LAST_HOOK),
+            5.0,
+            "Device did not run the powerdown hooks",
+            hooks=hooks,
+        )
+    return hooks
+
+
+@pytest.mark.asyncio
+async def test_reboot_hook_order_forced(
+    yaml_config: str,
+    run_compiled: RunCompiledFunction,
+    api_client_connected: APIClientConnectedFactory,
+) -> None:
+    """A forced reboot runs on_shutdown then on_powerdown, with no safe shutdown or teardown."""
+    hooks = await _record_reboot_hooks(yaml_config, run_compiled, api_client_connected)
+
+    assert hooks == [
+        ("second", "on_shutdown"),
+        ("first", "on_shutdown"),
+        ("second", "on_powerdown"),
+        ("first", "on_powerdown"),
+    ]
+
+
+@pytest.mark.asyncio
+async def test_reboot_hook_order_safe(
+    yaml_config: str,
+    run_compiled: RunCompiledFunction,
+    api_client_connected: APIClientConnectedFactory,
+) -> None:
+    """A safe reboot powers down only after every component has finished its teardown."""
+    hooks = await _record_reboot_hooks(yaml_config, run_compiled, api_client_connected)
+
+    assert hooks == [
+        ("second", "on_safe_shutdown"),
+        ("first", "on_safe_shutdown"),
+        ("second", "on_shutdown"),
+        ("first", "on_shutdown"),
+        ("second", "teardown_pending"),
+        ("first", "teardown_pending"),
+        ("second", "teardown_done"),
+        ("first", "teardown_done"),
+        ("second", "on_powerdown"),
+        ("first", "on_powerdown"),
+    ]