DNM: probe integration-test bucketing for cover

Touches cover/cover.h with a comment so determine-jobs.py routes the
cover component's integration tests into the bucketed split job. Used
to validate the matrix expansion in #16152.

Do not merge.

.ai/instructions.md

@@ -398,23 +398,13 @@ This document provides essential context for AI models interacting with this pro
         │       ├── i2c/         # I2C bus
         │       └── spi/         # SPI bus
         └── components/[component]/
-            ├── common.yaml          # Component-only config (no bus definitions)
-            ├── test.esp32-idf.yaml      # config + compile
-            ├── test.esp8266-ard.yaml    # config + compile
-            ├── test-variant.esp32-idf.yaml  # variant test, config + compile
-            ├── validate.esp32-idf.yaml      # config-only (never compiled)
-            └── validate-legacy.esp32-idf.yaml  # config-only variant
+            ├── common.yaml      # Component-only config (no bus definitions)
+            ├── test.esp32-idf.yaml
+            ├── test.esp8266-ard.yaml
+            └── test.rp2040-ard.yaml
         ```
         Run them using `script/test_build_components`. Use `-c <component>` to test specific components and `-t <target>` for specific platforms.
 
-    *   **Config-only test files (`validate.*.yaml`):** Use this prefix when a YAML file only needs to exercise schema/validation paths and does not need to be compiled. CI runs `validate.*.yaml` files with `esphome config` only and skips them during compile. The grammar mirrors `test.*.yaml`:
-        - `validate.<platform>.yaml` — base config-only test
-        - `validate-<variant>.<platform>.yaml` — config-only variant
-
-        Use this for things like deprecated-syntax migration tests, schema edge cases, or platform-specific validation branches where building firmware adds no signal. A component may have any mix of `test.*.yaml` and `validate.*.yaml` files. Validate files never participate in bus-grouping; each one runs as its own `esphome config` invocation.
-
-        When a PR's only edits to a component are `validate.*.yaml` files (no source changes, no `test.*.yaml` changes, and the component isn't pulled in as a dependency of another changed component), CI skips the compile stage for that component entirely and only runs config validation. This is decided in `script/determine-jobs.py` via `_component_change_is_validate_only` and surfaced as the `validate_only_components` output that the `test-build-components-split` job consumes.
-
     *   **Test Grouping with Packages:** Components that use shared bus packages can be grouped together in CI to reduce build count. **Never define buses (uart, i2c, spi, modbus) directly in test YAML files** — always use packages from `test_build_components/common/`:
         ```yaml
         # test.esp32-idf.yaml — use packages for buses

.clang-tidy

@@ -96,6 +96,7 @@ Checks: >-
   -modernize-avoid-variadic-functions,
   -modernize-avoid-c-arrays,
   -modernize-avoid-c-style-cast,
+  -modernize-concat-nested-namespaces,
   -modernize-macro-to-enum,
   -modernize-return-braced-init-list,
   -modernize-type-traits,
@@ -116,6 +117,7 @@ Checks: >-
   -portability-template-virtual-member-function,
   -readability-ambiguous-smartptr-reset-call,
   -readability-avoid-nested-conditional-operator,
+  -readability-container-contains,
   -readability-container-data-pointer,
   -readability-convert-member-functions-to-static,
   -readability-else-after-return,
@@ -131,6 +133,7 @@ Checks: >-
   -readability-redundant-inline-specifier,
   -readability-redundant-member-init,
   -readability-redundant-parentheses,
+  -readability-redundant-string-init,
   -readability-redundant-typename,
   -readability-uppercase-literal-suffix,
   -readability-use-anyofallof,

.clang-tidy.hash

@@ -1 +1 @@
-27aaab4e0ebfc10491720345aa746fc2dffa6a3985f73ec111b12dd99078d46f
+0c7f309d70eca8e3efd510092ddb23c530f3934c49371717efa124b788d761f8

.dockerignore

@@ -115,4 +115,4 @@ examples/
 Dockerfile
 .git/
 tests/
-.?*
+.*

.github/actions/build-image/action.yaml

@@ -47,7 +47,7 @@ runs:
 
     - name: Build and push to ghcr by digest
       id: build-ghcr
-      uses: docker/build-push-action@f9f3042f7e2789586610d6e8b85c8f03e5195baf # v7.2.0
+      uses: docker/build-push-action@bcafcacb16a39f128d818304e6c9c0c18556b85f # v7.1.0
       env:
         DOCKER_BUILD_SUMMARY: false
         DOCKER_BUILD_RECORD_UPLOAD: false
@@ -73,7 +73,7 @@ runs:
 
     - name: Build and push to dockerhub by digest
       id: build-dockerhub
-      uses: docker/build-push-action@f9f3042f7e2789586610d6e8b85c8f03e5195baf # v7.2.0
+      uses: docker/build-push-action@bcafcacb16a39f128d818304e6c9c0c18556b85f # v7.1.0
       env:
         DOCKER_BUILD_SUMMARY: false
         DOCKER_BUILD_RECORD_UPLOAD: false

.github/actions/restore-python/action.yml

@@ -27,18 +27,6 @@ runs:
         path: venv
         # yamllint disable-line rule:line-length
         key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-venv-${{ inputs.cache-key }}
-    - name: Set up uv
-      # Only needed on cache miss to populate the venv. ``uv pip install``
-      # detects the activated venv via ``VIRTUAL_ENV`` so the venv layout
-      # downstream jobs rely on is preserved.
-      if: steps.cache-venv.outputs.cache-hit != 'true'
-      uses: astral-sh/setup-uv@08807647e7069bb48b6ef5acd8ec9567f424441b # v8.1.0
-      with:
-        enable-cache: true
-        # Pin uv version so the action does not have to fetch the
-        # manifest from raw.githubusercontent.com on every cache
-        # miss; that fetch flakes on Windows runners.
-        version: "0.11.15"
     - name: Create Python virtual environment
       if: steps.cache-venv.outputs.cache-hit != 'true' && runner.os != 'Windows'
       shell: bash
@@ -46,8 +34,8 @@ runs:
         python -m venv venv
         source venv/bin/activate
         python --version
-        uv pip install -r requirements.txt -r requirements_test.txt
-        uv pip install -e .
+        pip install -r requirements.txt -r requirements_test.txt
+        pip install -e .
     - name: Create Python virtual environment
       if: steps.cache-venv.outputs.cache-hit != 'true' && runner.os == 'Windows'
       shell: bash
@@ -55,5 +43,5 @@ runs:
         python -m venv venv
         source ./venv/Scripts/activate
         python --version
-        uv pip install -r requirements.txt -r requirements_test.txt
-        uv pip install -e .
+        pip install -r requirements.txt -r requirements_test.txt
+        pip install -e .

.github/copilot-instructions.md

@@ -1 +1 @@
-../AGENTS.md
+../.ai/instructions.md

.github/scripts/auto-label-pr/detectors.js

@@ -1,3 +1,4 @@
+const fs = require('fs');
 const { DOCS_PR_PATTERNS } = require('./constants');
 const {
   COMPONENT_REGEX,
@@ -8,31 +9,6 @@ const {
 } = require('../detect-tags');
 const { loadCodeowners, getEffectiveOwners } = require('../codeowners');
 
-// Top-level `CONFIG_SCHEMA = ...` (assignment) or `CONFIG_SCHEMA: ConfigType = ...` (annotation).
-// Ruff/Black enforce exactly one space around `=` and no space before `:`,
-// so we can match strictly: `CONFIG_SCHEMA ` or `CONFIG_SCHEMA:`.
-const CONFIG_SCHEMA_REGEX = /^CONFIG_SCHEMA[ :]/m;
-
-// Fetch a file's contents from the PR head SHA via the GitHub API.
-// The auto-label workflow runs on `pull_request_target`, which checks out the
-// base branch — files added by the PR don't exist in the workspace, so we have
-// to fetch them from the head SHA. Returns null if the file can't be fetched.
-async function fetchPrFileContent(github, context, path) {
-  try {
-    const { owner, repo } = context.repo;
-    const { data } = await github.rest.repos.getContent({
-      owner,
-      repo,
-      path,
-      ref: context.payload.pull_request.head.sha,
-    });
-    return Buffer.from(data.content, 'base64').toString('utf8');
-  } catch (error) {
-    console.log(`Failed to fetch ${path} from PR head:`, error.message);
-    return null;
-  }
-}
-
 // Strategy: Merge branch detection
 async function detectMergeBranch(context) {
   const labels = new Set();
@@ -69,64 +45,52 @@ async function detectComponentPlatforms(changedFiles, apiData) {
 }
 
 // Strategy: New component detection
-async function detectNewComponents(github, context, prFiles) {
+async function detectNewComponents(prFiles) {
   const labels = new Set();
-  let hasYamlLoadable = false;
   const addedFiles = prFiles.filter(file => file.status === 'added').map(file => file.filename);
 
   for (const file of addedFiles) {
     const componentMatch = file.match(/^esphome\/components\/([^\/]+)\/__init__\.py$/);
-    if (!componentMatch) continue;
-
-    labels.add('new-component');
-    const content = await fetchPrFileContent(github, context, file);
-    if (content === null) {
-      // Safe default: assume YAML-loadable so needs-docs behaviour is unchanged on fetch failure
-      hasYamlLoadable = true;
-      continue;
-    }
-    if (content.includes('IS_TARGET_PLATFORM = True')) {
-      labels.add('new-target-platform');
-    }
-    if (CONFIG_SCHEMA_REGEX.test(content)) {
-      hasYamlLoadable = true;
+    if (componentMatch) {
+      try {
+        const content = fs.readFileSync(file, 'utf8');
+        if (content.includes('IS_TARGET_PLATFORM = True')) {
+          labels.add('new-target-platform');
+        }
+      } catch (error) {
+        console.log(`Failed to read content of ${file}:`, error.message);
+      }
+      labels.add('new-component');
     }
   }
 
-  return { labels, hasYamlLoadable };
+  return labels;
 }
 
 // Strategy: New platform detection
-async function detectNewPlatforms(github, context, prFiles, apiData) {
+async function detectNewPlatforms(prFiles, apiData) {
   const labels = new Set();
-  let hasYamlLoadable = false;
   const addedFiles = prFiles.filter(file => file.status === 'added').map(file => file.filename);
 
-  const platformPathPatterns = [
-    /^esphome\/components\/([^\/]+)\/([^\/]+)\.py$/,
-    /^esphome\/components\/([^\/]+)\/([^\/]+)\/__init__\.py$/,
-  ];
-
   for (const file of addedFiles) {
-    for (const re of platformPathPatterns) {
-      const match = file.match(re);
-      if (!match) continue;
-      const platform = match[2];
-      if (!apiData.platformComponents.includes(platform)) break;
-
-      labels.add('new-platform');
-      const content = await fetchPrFileContent(github, context, file);
-      if (content === null) {
-        // Safe default: assume YAML-loadable so needs-docs behaviour is unchanged on fetch failure
-        hasYamlLoadable = true;
-      } else if (CONFIG_SCHEMA_REGEX.test(content)) {
-        hasYamlLoadable = true;
+    const platformFileMatch = file.match(/^esphome\/components\/([^\/]+)\/([^\/]+)\.py$/);
+    if (platformFileMatch) {
+      const [, component, platform] = platformFileMatch;
+      if (apiData.platformComponents.includes(platform)) {
+        labels.add('new-platform');
+      }
+    }
+
+    const platformDirMatch = file.match(/^esphome\/components\/([^\/]+)\/([^\/]+)\/__init__\.py$/);
+    if (platformDirMatch) {
+      const [, component, platform] = platformDirMatch;
+      if (apiData.platformComponents.includes(platform)) {
+        labels.add('new-platform');
       }
-      break;
     }
   }
 
-  return { labels, hasYamlLoadable };
+  return labels;
 }
 
 // Strategy: Core files detection
@@ -336,7 +300,7 @@ function detectMaintainerAccess(context) {
 }
 
 // Strategy: Requirements detection
-async function detectRequirements(allLabels, prFiles, context, hasYamlLoadable) {
+async function detectRequirements(allLabels, prFiles, context) {
   const labels = new Set();
 
   // Check for missing tests
@@ -344,15 +308,8 @@ async function detectRequirements(allLabels, prFiles, context, hasYamlLoadable)
     labels.add('needs-tests');
   }
 
-  // Check for missing docs.
-  // `new-feature` (PR-body checkbox) always counts. `new-component` / `new-platform`
-  // only count when at least one newly added file defines a top-level CONFIG_SCHEMA,
-  // i.e. the new component/platform is actually loadable from YAML.
-  const docsEligible =
-    allLabels.has('new-feature') ||
-    ((allLabels.has('new-component') || allLabels.has('new-platform')) && hasYamlLoadable);
-
-  if (docsEligible) {
+  // Check for missing docs
+  if (allLabels.has('new-component') || allLabels.has('new-platform') || allLabels.has('new-feature')) {
     const prBody = context.payload.pull_request.body || '';
     const hasDocsLink = DOCS_PR_PATTERNS.some(pattern => pattern.test(prBody));
 

.github/scripts/auto-label-pr/index.js

@@ -106,8 +106,8 @@ module.exports = async ({ github, context }) => {
   const [
     branchLabels,
     componentLabels,
-    newComponentResult,
-    newPlatformResult,
+    newComponentLabels,
+    newPlatformLabels,
     coreLabels,
     sizeLabels,
     dashboardLabels,
@@ -120,8 +120,8 @@ module.exports = async ({ github, context }) => {
   ] = await Promise.all([
     detectMergeBranch(context),
     detectComponentPlatforms(changedFiles, apiData),
-    detectNewComponents(github, context, prFiles),
-    detectNewPlatforms(github, context, prFiles, apiData),
+    detectNewComponents(prFiles),
+    detectNewPlatforms(prFiles, apiData),
     detectCoreChanges(changedFiles),
     detectPRSize(prFiles, totalAdditions, totalDeletions, totalChanges, isMegaPR, SMALL_PR_THRESHOLD, MEDIUM_PR_THRESHOLD, TOO_BIG_THRESHOLD),
     detectDashboardChanges(changedFiles),
@@ -133,13 +133,6 @@ module.exports = async ({ github, context }) => {
     detectMaintainerAccess(context)
   ]);
 
-  // Extract new-component / new-platform results
-  const newComponentLabels = newComponentResult.labels;
-  const newPlatformLabels = newPlatformResult.labels;
-  // Eligible for needs-docs only if any newly added component or platform file
-  // defines a top-level CONFIG_SCHEMA (i.e. is actually loadable from YAML).
-  const hasYamlLoadable = newComponentResult.hasYamlLoadable || newPlatformResult.hasYamlLoadable;
-
   // Extract deprecated component info
   const deprecatedLabels = deprecatedResult.labels;
   const deprecatedInfo = deprecatedResult.deprecatedInfo;
@@ -161,7 +154,7 @@ module.exports = async ({ github, context }) => {
   ]);
 
   // Detect requirements based on all other labels
-  const requirementLabels = await detectRequirements(allLabels, prFiles, context, hasYamlLoadable);
+  const requirementLabels = await detectRequirements(allLabels, prFiles, context);
   for (const label of requirementLabels) {
     allLabels.add(label);
   }

.github/workflows/auto-label-pr.yml

@@ -6,10 +6,9 @@ on:
   pull_request_target:
     types: [labeled, opened, reopened, synchronize, edited]
 
-# All PR/label/review writes are performed with the App token minted below,
-# so the workflow's GITHUB_TOKEN only needs read access for checkout.
 permissions:
-  contents: read  # actions/checkout reads the workflow source
+  pull-requests: write
+  contents: read
 
 env:
   SMALL_PR_THRESHOLD: 30
@@ -28,14 +27,10 @@ jobs:
 
       - name: Generate a token
         id: generate-token
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
+        uses: actions/create-github-app-token@1b10c78c7865c340bc4f6099eb2f838309f1e8c3 # v2
         with:
-          client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
+          app-id: ${{ secrets.ESPHOME_GITHUB_APP_ID }}
           private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
-          # Scope the minted App token to the minimum needed by auto-label-pr/*.js.
-          permission-contents: read       # repos.getContent for CODEOWNERS and file lookups in detectors.js
-          permission-issues: write        # listLabelsOnIssue, addLabels, removeLabel, list/createComment
-          permission-pull-requests: write  # pulls.listFiles, list/create/update/dismissReview
 
       - name: Auto Label PR
         uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0

.github/workflows/ci-api-proto.yml

@@ -12,8 +12,8 @@ on:
       - ".github/workflows/ci-api-proto.yml"
 
 permissions:
-  contents: read        # actions/checkout for the PR head
-  pull-requests: write  # pulls.createReview / listReviews / dismissReview when generated proto files are stale
+  contents: read
+  pull-requests: write
 
 jobs:
   check:
@@ -26,16 +26,6 @@ jobs:
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
           python-version: "3.11"
-      - name: Set up uv
-        # ``--system`` (below) installs into the setup-python interpreter;
-        # no venv is created or restored by this workflow.
-        uses: astral-sh/setup-uv@08807647e7069bb48b6ef5acd8ec9567f424441b # v8.1.0
-        with:
-          enable-cache: true
-          # Pin uv version so the action does not have to fetch the
-          # manifest from raw.githubusercontent.com on every cache
-          # miss; that fetch flakes on Windows runners.
-          version: "0.11.15"
 
       - name: Install apt dependencies
         run: |
@@ -44,7 +34,7 @@ jobs:
           sudo apt install -y protobuf-compiler
           protoc --version
       - name: Install python dependencies
-        run: uv pip install --system aioesphomeapi -c requirements.txt -r requirements_dev.txt
+        run: pip install aioesphomeapi -c requirements.txt -r requirements_dev.txt
       - name: Generate files
         run: script/api_protobuf/api_protobuf.py
       - name: Check for changes

.github/workflows/ci-clang-tidy-hash.yml

@@ -12,8 +12,8 @@ on:
       - ".github/workflows/ci-clang-tidy-hash.yml"
 
 permissions:
-  contents: read        # actions/checkout for the PR head
-  pull-requests: write  # pulls.createReview / listReviews / dismissReview when the clang-tidy hash is out of date
+  contents: read
+  pull-requests: write
 
 jobs:
   verify-hash:

.github/workflows/ci-docker.yml

@@ -22,7 +22,8 @@ on:
       - "script/platformio_install_deps.py"
 
 permissions:
-  contents: read  # actions/checkout only; the build does not push images
+  contents: read
+  packages: read
 
 concurrency:
   # yamllint disable-line rule:line-length
@@ -48,7 +49,7 @@ jobs:
         with:
           python-version: "3.11"
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@d7f5e7f509e45cec5c76c4d5afdd7de93d0b3df5 # v4.1.0
+        uses: docker/setup-buildx-action@4d04d5d9486b7bd6fa91e7baf45bbb4f8b9deedd # v4.0.0
 
       - name: Set TAG
         run: |

.github/workflows/ci-memory-impact-comment.yml

@@ -7,9 +7,9 @@ on:
     types: [completed]
 
 permissions:
-  contents: read        # actions/checkout of the base repo at the PR's target branch
-  pull-requests: write  # gh api to look up the PR by head SHA and post/update the memory-impact comment
-  actions: read         # gh run download for the memory-analysis artifacts produced by the CI workflow run
+  contents: read
+  pull-requests: write
+  actions: read
 
 jobs:
   memory-impact-comment:

.github/workflows/ci.yml

@@ -6,10 +6,18 @@ on:
     branches: [dev, beta, release]
 
   pull_request:
+    paths:
+      - "**"
+      - "!.github/workflows/*.yml"
+      - "!.github/actions/build-image/*"
+      - ".github/workflows/ci.yml"
+      - "!.yamllint"
+      - "!.github/dependabot.yml"
+      - "!docker/**"
   merge_group:
 
 permissions:
-  contents: read  # actions/checkout for all jobs; individual jobs add their own scopes when they need to write
+  contents: read
 
 env:
   DEFAULT_PYTHON: "3.11"
@@ -44,26 +52,14 @@ jobs:
           path: venv
           # yamllint disable-line rule:line-length
           key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-venv-${{ steps.cache-key.outputs.key }}
-      - name: Set up uv
-        # Only needed on cache miss to populate the venv. ``uv pip install``
-        # detects the activated venv via ``VIRTUAL_ENV`` so downstream jobs
-        # that ``. venv/bin/activate`` see an identical layout.
-        if: steps.cache-venv.outputs.cache-hit != 'true'
-        uses: astral-sh/setup-uv@08807647e7069bb48b6ef5acd8ec9567f424441b # v8.1.0
-        with:
-          enable-cache: true
-          # Pin uv version so the action does not have to fetch the
-          # manifest from raw.githubusercontent.com on every cache
-          # miss; that fetch flakes on Windows runners.
-          version: "0.11.15"
       - name: Create Python virtual environment
         if: steps.cache-venv.outputs.cache-hit != 'true'
         run: |
           python -m venv venv
           . venv/bin/activate
           python --version
-          uv pip install -r requirements.txt -r requirements_dev.txt -r requirements_test.txt pre-commit
-          uv pip install -e .
+          pip install -r requirements.txt -r requirements_dev.txt -r requirements_test.txt pre-commit
+          pip install -e .
 
   pylint:
     name: Check pylint
@@ -93,8 +89,6 @@ jobs:
     runs-on: ubuntu-24.04
     needs:
       - common
-      - determine-jobs
-    if: needs.determine-jobs.outputs.core-ci == 'true'
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
@@ -142,57 +136,6 @@ jobs:
           if-no-files-found: ignore
           retention-days: 14
 
-  device-builder:
-    name: Test downstream esphome/device-builder
-    runs-on: ubuntu-24.04
-    needs:
-      - common
-      - determine-jobs
-    if: needs.determine-jobs.outputs.device-builder == 'true'
-    steps:
-      - name: Check out esphome (this PR)
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
-        with:
-          path: esphome
-      - name: Check out esphome/device-builder
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
-        with:
-          repository: esphome/device-builder
-          ref: main
-          path: device-builder
-      - name: Set up Python
-        uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
-        with:
-          python-version: "3.13"
-      - name: Set up uv
-        # Mirrors the install shape device-builder's own CI uses
-        # (esphome/device-builder#192): uv replaces pip for the
-        # install step (order-of-magnitude faster on cold boots,
-        # with its own wheel cache). actions/setup-python still
-        # provides the interpreter.
-        uses: astral-sh/setup-uv@08807647e7069bb48b6ef5acd8ec9567f424441b # v8.1.0
-        with:
-          enable-cache: true
-          # Pin uv version so the action does not have to fetch the
-          # manifest from raw.githubusercontent.com on every cache
-          # miss; that fetch flakes on Windows runners.
-          version: "0.11.15"
-      - name: Install device-builder + esphome from PR
-        # Install device-builder with its esphome + test extras
-        # first so its pinned versions of pytest/etc. land, then
-        # overlay the PR's esphome so the downstream tests run
-        # against this PR's Python code. ``--system`` installs into
-        # the runner's Python instead of a venv.
-        run: |
-          uv pip install --system -e './device-builder[esphome,test]'
-          uv pip install --system -e ./esphome
-      - name: Run device-builder pytest
-        # ``-n auto`` runs under pytest-xdist (matches device-builder's
-        # own CI). No ``--cov`` here -- this is purely a downstream
-        # smoke check against this PR's esphome code.
-        working-directory: device-builder
-        run: pytest -q -n auto --maxfail=5 --durations=30 --no-cov --ignore=tests/benchmarks
-
   pytest:
     name: Run pytest
     strategy:
@@ -217,8 +160,6 @@ jobs:
     runs-on: ${{ matrix.os }}
     needs:
       - common
-      - determine-jobs
-    if: needs.determine-jobs.outputs.core-ci == 'true'
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
@@ -234,14 +175,14 @@ jobs:
         if: matrix.os == 'windows-latest'
         run: |
           . ./venv/Scripts/activate.ps1
-          pytest -vv --cov-report=xml --tb=native --durations=30 -n auto tests --ignore=tests/integration/
+          pytest -vv --cov-report=xml --tb=native -n auto tests --ignore=tests/integration/
       - name: Run pytest
         if: matrix.os == 'ubuntu-latest' || matrix.os == 'macOS-latest'
         run: |
           . venv/bin/activate
-          pytest -vv --cov-report=xml --tb=native --durations=30 -n auto tests --ignore=tests/integration/
+          pytest -vv --cov-report=xml --tb=native -n auto tests --ignore=tests/integration/
       - name: Upload coverage to Codecov
-        uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354 # v6.0.1
+        uses: codecov/codecov-action@57e3a136b779b570ffcdbf80b3bdc90e7fab3de2 # v6.0.0
         with:
           token: ${{ secrets.CODECOV_TOKEN }}
       - name: Save Python virtual environment cache
@@ -257,17 +198,12 @@ jobs:
     needs:
       - common
     outputs:
-      core-ci: ${{ steps.determine.outputs.core-ci }}
       integration-tests: ${{ steps.determine.outputs.integration-tests }}
       integration-test-buckets: ${{ steps.determine.outputs.integration-test-buckets }}
       clang-tidy: ${{ steps.determine.outputs.clang-tidy }}
       clang-tidy-mode: ${{ steps.determine.outputs.clang-tidy-mode }}
-      clang-tidy-full-scan: ${{ steps.determine.outputs.clang-tidy-full-scan }}
       python-linters: ${{ steps.determine.outputs.python-linters }}
       import-time: ${{ steps.determine.outputs.import-time }}
-      device-builder: ${{ steps.determine.outputs.device-builder }}
-      native-idf: ${{ steps.determine.outputs.native-idf }}
-      native-idf-components: ${{ steps.determine.outputs.native-idf-components }}
       changed-components: ${{ steps.determine.outputs.changed-components }}
       changed-components-with-tests: ${{ steps.determine.outputs.changed-components-with-tests }}
       directly-changed-components-with-tests: ${{ steps.determine.outputs.directly-changed-components-with-tests }}
@@ -277,7 +213,6 @@ jobs:
       cpp-unit-tests-run-all: ${{ steps.determine.outputs.cpp-unit-tests-run-all }}
       cpp-unit-tests-components: ${{ steps.determine.outputs.cpp-unit-tests-components }}
       component-test-batches: ${{ steps.determine.outputs.component-test-batches }}
-      validate-only-components: ${{ steps.determine.outputs.validate-only-components }}
       benchmarks: ${{ steps.determine.outputs.benchmarks }}
     steps:
       - name: Check out code from GitHub
@@ -301,27 +236,17 @@ jobs:
           GH_TOKEN: ${{ github.token }}
         run: |
           . venv/bin/activate
-          EXTRA_ARGS=""
-          if [[ "${{ contains(github.event.pull_request.labels.*.name, 'ci-run-all') }}" == "true" ]]; then
-            EXTRA_ARGS="--force-all"
-            echo "::notice::ci-run-all label detected -- forcing every CI job to run"
-          fi
-          output=$(python script/determine-jobs.py $EXTRA_ARGS)
+          output=$(python script/determine-jobs.py)
           echo "Test determination output:"
           echo "$output" | jq
 
           # Extract individual fields
-          echo "core-ci=$(echo "$output" | jq -r '.core_ci')" >> $GITHUB_OUTPUT
           echo "integration-tests=$(echo "$output" | jq -r '.integration_tests')" >> $GITHUB_OUTPUT
           echo "integration-test-buckets=$(echo "$output" | jq -c '.integration_test_buckets')" >> $GITHUB_OUTPUT
           echo "clang-tidy=$(echo "$output" | jq -r '.clang_tidy')" >> $GITHUB_OUTPUT
           echo "clang-tidy-mode=$(echo "$output" | jq -r '.clang_tidy_mode')" >> $GITHUB_OUTPUT
-          echo "clang-tidy-full-scan=$(echo "$output" | jq -r '.clang_tidy_full_scan')" >> $GITHUB_OUTPUT
           echo "python-linters=$(echo "$output" | jq -r '.python_linters')" >> $GITHUB_OUTPUT
           echo "import-time=$(echo "$output" | jq -r '.import_time')" >> $GITHUB_OUTPUT
-          echo "device-builder=$(echo "$output" | jq -r '.device_builder')" >> $GITHUB_OUTPUT
-          echo "native-idf=$(echo "$output" | jq -r '.native_idf')" >> $GITHUB_OUTPUT
-          echo "native-idf-components=$(echo "$output" | jq -r '.native_idf_components')" >> $GITHUB_OUTPUT
           echo "changed-components=$(echo "$output" | jq -c '.changed_components')" >> $GITHUB_OUTPUT
           echo "changed-components-with-tests=$(echo "$output" | jq -c '.changed_components_with_tests')" >> $GITHUB_OUTPUT
           echo "directly-changed-components-with-tests=$(echo "$output" | jq -c '.directly_changed_components_with_tests')" >> $GITHUB_OUTPUT
@@ -331,7 +256,6 @@ jobs:
           echo "cpp-unit-tests-run-all=$(echo "$output" | jq -r '.cpp_unit_tests_run_all')" >> $GITHUB_OUTPUT
           echo "cpp-unit-tests-components=$(echo "$output" | jq -c '.cpp_unit_tests_components')" >> $GITHUB_OUTPUT
           echo "component-test-batches=$(echo "$output" | jq -c '.component_test_batches')" >> $GITHUB_OUTPUT
-          echo "validate-only-components=$(echo "$output" | jq -c '.validate_only_components')" >> $GITHUB_OUTPUT
           echo "benchmarks=$(echo "$output" | jq -r '.benchmarks')" >> $GITHUB_OUTPUT
       - name: Save components graph cache
         if: github.ref == 'refs/heads/dev'
@@ -365,24 +289,14 @@ jobs:
         with:
           path: venv
           key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-venv-${{ needs.common.outputs.cache-key }}
-      - name: Set up uv
-        # Only needed on cache miss to populate the venv.
-        if: steps.cache-venv.outputs.cache-hit != 'true'
-        uses: astral-sh/setup-uv@08807647e7069bb48b6ef5acd8ec9567f424441b # v8.1.0
-        with:
-          enable-cache: true
-          # Pin uv version so the action does not have to fetch the
-          # manifest from raw.githubusercontent.com on every cache
-          # miss; that fetch flakes on Windows runners.
-          version: "0.11.15"
       - name: Create Python virtual environment
         if: steps.cache-venv.outputs.cache-hit != 'true'
         run: |
           python -m venv venv
           . venv/bin/activate
           python --version
-          uv pip install -r requirements.txt -r requirements_test.txt
-          uv pip install -e .
+          pip install -r requirements.txt -r requirements_test.txt
+          pip install -e .
       - name: Register matcher
         run: echo "::add-matcher::.github/workflows/matchers/pytest.json"
       - name: Run integration tests
@@ -394,7 +308,7 @@ jobs:
           . venv/bin/activate
           mapfile -t test_files < <(echo "$BUCKET_TESTS" | jq -r '.[]')
           echo "Bucket ${{ matrix.bucket.name }}: running ${#test_files[@]} integration tests"
-          pytest -vv --no-cov --tb=native --durations=30 -n auto "${test_files[@]}"
+          pytest -vv --no-cov --tb=native -n auto "${test_files[@]}"
 
   cpp-unit-tests:
     name: Run C++ unit tests
@@ -452,12 +366,9 @@ jobs:
           echo "binary=$BINARY" >> $GITHUB_OUTPUT
 
       - name: Run CodSpeed benchmarks
-        uses: CodSpeedHQ/action@3194d9a39c4d46684cb44bf7207fc56626aad8fd # v4.15.1
+        uses: CodSpeedHQ/action@c381be0bfd20e844fb45594f6aa182ffcd94545c # v4.15.0
         with:
-          run: |
-            . venv/bin/activate
-            ${{ steps.build.outputs.binary }}
-            pytest tests/benchmarks/python/ --codspeed --no-cov
+          run: ${{ steps.build.outputs.binary }}
           mode: simulation
 
   clang-tidy-single:
@@ -531,13 +442,7 @@ jobs:
         id: check_full_scan
         run: |
           . venv/bin/activate
-          # determine-jobs.clang-tidy-full-scan is true when core C++ changed
-          # OR the ci-run-all label forced --force-all. Independent of the
-          # hash check, both must produce a full scan in the job itself.
-          if [ "${{ needs.determine-jobs.outputs.clang-tidy-full-scan }}" = "true" ]; then
-            echo "full_scan=true" >> $GITHUB_OUTPUT
-            echo "reason=determine_jobs" >> $GITHUB_OUTPUT
-          elif python script/clang_tidy_hash.py --check; then
+          if python script/clang_tidy_hash.py --check; then
             echo "full_scan=true" >> $GITHUB_OUTPUT
             echo "reason=hash_changed" >> $GITHUB_OUTPUT
           else
@@ -549,7 +454,7 @@ jobs:
         run: |
           . venv/bin/activate
           if [ "${{ steps.check_full_scan.outputs.full_scan }}" = "true" ]; then
-            echo "Running FULL clang-tidy scan (reason: ${{ steps.check_full_scan.outputs.reason }})"
+            echo "Running FULL clang-tidy scan (hash changed)"
             script/clang-tidy --all-headers --fix ${{ matrix.options }} ${{ matrix.ignore_errors && '|| true' || '' }}
           else
             echo "Running clang-tidy on changed files only"
@@ -609,13 +514,7 @@ jobs:
         id: check_full_scan
         run: |
           . venv/bin/activate
-          # determine-jobs.clang-tidy-full-scan is true when core C++ changed
-          # OR the ci-run-all label forced --force-all. Independent of the
-          # hash check, both must produce a full scan in the job itself.
-          if [ "${{ needs.determine-jobs.outputs.clang-tidy-full-scan }}" = "true" ]; then
-            echo "full_scan=true" >> $GITHUB_OUTPUT
-            echo "reason=determine_jobs" >> $GITHUB_OUTPUT
-          elif python script/clang_tidy_hash.py --check; then
+          if python script/clang_tidy_hash.py --check; then
             echo "full_scan=true" >> $GITHUB_OUTPUT
             echo "reason=hash_changed" >> $GITHUB_OUTPUT
           else
@@ -627,7 +526,7 @@ jobs:
         run: |
           . venv/bin/activate
           if [ "${{ steps.check_full_scan.outputs.full_scan }}" = "true" ]; then
-            echo "Running FULL clang-tidy scan (reason: ${{ steps.check_full_scan.outputs.reason }})"
+            echo "Running FULL clang-tidy scan (hash changed)"
             script/clang-tidy --all-headers --fix --environment esp32-arduino-tidy
           else
             echo "Running clang-tidy on changed files only"
@@ -704,13 +603,7 @@ jobs:
         id: check_full_scan
         run: |
           . venv/bin/activate
-          # determine-jobs.clang-tidy-full-scan is true when core C++ changed
-          # OR the ci-run-all label forced --force-all. Independent of the
-          # hash check, both must produce a full scan in the job itself.
-          if [ "${{ needs.determine-jobs.outputs.clang-tidy-full-scan }}" = "true" ]; then
-            echo "full_scan=true" >> $GITHUB_OUTPUT
-            echo "reason=determine_jobs" >> $GITHUB_OUTPUT
-          elif python script/clang_tidy_hash.py --check; then
+          if python script/clang_tidy_hash.py --check; then
             echo "full_scan=true" >> $GITHUB_OUTPUT
             echo "reason=hash_changed" >> $GITHUB_OUTPUT
           else
@@ -722,7 +615,7 @@ jobs:
         run: |
           . venv/bin/activate
           if [ "${{ steps.check_full_scan.outputs.full_scan }}" = "true" ]; then
-            echo "Running FULL clang-tidy scan (reason: ${{ steps.check_full_scan.outputs.reason }})"
+            echo "Running FULL clang-tidy scan (hash changed)"
             script/clang-tidy --all-headers --fix ${{ matrix.options }}
           else
             echo "Running clang-tidy on changed files only"
@@ -833,142 +726,20 @@ jobs:
           echo "Config validation passed! Starting compilation..."
           echo ""
 
-          # Compute the compile-stage component list. Components whose only
-          # changes are validate.*.yaml files are config-only -- their source
-          # and test fixtures didn't move, so rebuilding firmware adds no
-          # signal. Subtract them from this batch before invoking compile.
-          validate_only_json='${{ needs.determine-jobs.outputs.validate-only-components }}'
-          if [ -z "$validate_only_json" ]; then
-            validate_only_json='[]'
-          fi
-          if ! validate_only_csv=$(echo "$validate_only_json" | jq -r 'join(",")'); then
-            echo "::error::Failed to render validate-only-components as CSV from: $validate_only_json"
-            exit 1
-          fi
-          if [ -z "$validate_only_csv" ]; then
-            compile_csv="$components_csv"
-          else
-            components_sorted=$(echo "$components_csv" | tr ',' '\n' | sort -u)
-            validate_sorted=$(echo "$validate_only_csv" | tr ',' '\n' | sort -u)
-            if ! diff_out=$(comm -23 <(echo "$components_sorted") <(echo "$validate_sorted")); then
-              echo "::error::Failed to compute compile component subset."
-              exit 1
-            fi
-            compile_csv=$(echo "$diff_out" | paste -sd ',' -)
-            skipped=$(comm -12 <(echo "$components_sorted") <(echo "$validate_sorted") | paste -sd ',' -)
-            if [ -n "$skipped" ]; then
-              echo "Validate-only components in this batch (skipping compile): $skipped"
-            fi
-          fi
-
           # Show disk space before compilation
           echo "Disk space before compilation:"
           df -h
           echo ""
 
-          if [ -n "$compile_csv" ]; then
-            # Run compilation with grouping and isolation
-            python3 script/test_build_components.py -e compile -c "$compile_csv" -f --isolate "$directly_changed_csv"
-          else
-            echo "All components in this batch are validate-only -- skipping compile stage."
-          fi
-
-  test-native-idf:
-    name: Test components with native ESP-IDF
-    runs-on: ubuntu-24.04
-    needs:
-      - common
-      - determine-jobs
-    if: github.event_name == 'pull_request' && needs.determine-jobs.outputs.native-idf == 'true'
-    env:
-      ESPHOME_ESP_IDF_PREFIX: ~/.esphome-idf
-      # Comma-joined subset of the native-IDF representative component list,
-      # computed by script/determine-jobs.py (native_idf_components_to_test).
-      # Single source of truth -- the full list lives in
-      # script/determine-jobs.py::NATIVE_IDF_TEST_COMPONENTS.
-      TEST_COMPONENTS: ${{ needs.determine-jobs.outputs.native-idf-components }}
-    steps:
-      - name: Check out code from GitHub
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
-
-      - name: Restore Python
-        uses: ./.github/actions/restore-python
-        with:
-          python-version: ${{ env.DEFAULT_PYTHON }}
-          cache-key: ${{ needs.common.outputs.cache-key }}
-
-      - name: Cache ESPHome
-        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
-        with:
-          path: ~/.esphome-idf
-          key: ${{ runner.os }}-esphome-${{ needs.common.outputs.cache-key }}
-
-      - name: Run native ESP-IDF compile test
-        run: |
-          . venv/bin/activate
-
-          # Check if /mnt has more free space than / before bind mounting
-          # Extract available space in KB for comparison
-          root_avail=$(df -k / | awk 'NR==2 {print $4}')
-          mnt_avail=$(df -k /mnt 2>/dev/null | awk 'NR==2 {print $4}')
-
-          echo "Available space: / has ${root_avail}KB, /mnt has ${mnt_avail}KB"
-
-          # Only use /mnt if it has more space than /
-          if [ -n "$mnt_avail" ] && [ "$mnt_avail" -gt "$root_avail" ]; then
-            echo "Using /mnt for build files (more space available)"
-            # Bind mount PlatformIO directory to /mnt (tools, packages, build cache all go there)
-            sudo mkdir -p /mnt/esphome-idf
-            sudo chown $USER:$USER /mnt/esphome-idf
-            mkdir -p ~/.esphome-idf
-            sudo mount --bind /mnt/esphome-idf ~/.esphome-idf
-
-            # Bind mount test build directory to /mnt
-            sudo mkdir -p /mnt/test_build_components_build
-            sudo chown $USER:$USER /mnt/test_build_components_build
-            mkdir -p tests/test_build_components/build
-            sudo mount --bind /mnt/test_build_components_build tests/test_build_components/build
-          else
-            echo "Using / for build files (more space available than /mnt or /mnt unavailable)"
-          fi
-
-          echo "Testing components: $TEST_COMPONENTS"
-          echo ""
-
-          # Show disk space before validation (after bind mounts setup)
-          echo "Disk space before config validation:"
-          df -h
-          echo ""
-
-          # Run config validation (auto-grouped by test_build_components.py)
-          python3 script/test_build_components.py -e config -t esp32-idf -c "$TEST_COMPONENTS" -f --toolchain esp-idf
-
-          echo ""
-          echo "Config validation passed! Starting compilation..."
-          echo ""
-
-          # Show disk space before compilation
-          echo "Disk space before compilation:"
-          df -h
-          echo ""
-
-          # Run compilation (auto-grouped by test_build_components.py)
-          python3 script/test_build_components.py -e compile -t esp32-idf -c "$TEST_COMPONENTS" -f --toolchain esp-idf
-
-      - name: Save ESPHome cache
-        if: github.ref == 'refs/heads/dev'
-        uses: actions/cache/save@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
-        with:
-          path: ~/.esphome-idf
-          key: ${{ runner.os }}-esphome-${{ needs.common.outputs.cache-key }}
+          # Run compilation with grouping and isolation
+          python3 script/test_build_components.py -e compile -c "$components_csv" -f --isolate "$directly_changed_csv"
 
   pre-commit-ci-lite:
     name: pre-commit.ci lite
     runs-on: ubuntu-latest
     needs:
       - common
-      - determine-jobs
-    if: github.event_name == 'pull_request' && !startsWith(github.base_ref, 'beta') && !startsWith(github.base_ref, 'release') && needs.determine-jobs.outputs.core-ci == 'true'
+    if: github.event_name == 'pull_request' && !startsWith(github.base_ref, 'beta') && !startsWith(github.base_ref, 'release')
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
@@ -1242,8 +1013,8 @@ jobs:
       - memory-impact-pr-branch
     if: github.event_name == 'pull_request' && github.event.pull_request.head.repo.full_name == github.repository && fromJSON(needs.determine-jobs.outputs.memory_impact).should_run == 'true' && needs.memory-impact-target-branch.outputs.skip != 'true'
     permissions:
-      contents: read        # actions/checkout to load the comment-posting script
-      pull-requests: write  # ci_memory_impact_comment.py posts/updates the memory-impact comment on the PR
+      contents: read
+      pull-requests: write
     env:
       GH_TOKEN: ${{ github.token }}
     steps:
@@ -1292,9 +1063,7 @@ jobs:
       - clang-tidy-nosplit
       - clang-tidy-split
       - determine-jobs
-      - device-builder
       - test-build-components-split
-      - test-native-idf
       - pre-commit-ci-lite
       - memory-impact-target-branch
       - memory-impact-pr-branch

.github/workflows/close-pr-from-fork-default-branch.yml

@@ -6,8 +6,8 @@ on:
     types: [opened, reopened]
 
 permissions:
-  pull-requests: write  # pulls.update to close the PR opened from a fork's default branch
-  issues: write         # issues.createComment to explain to the contributor why the PR was closed
+  pull-requests: write
+  issues: write
 
 jobs:
   close:

.github/workflows/codeowner-approved-label-update.yml

@@ -15,9 +15,9 @@ on:
       - beta
 
 permissions:
-  issues: write       # issues.addLabels / removeLabel to manage the 'code-owner-approved' label on the PR
-  pull-requests: read  # listReviews to determine whether a codeowner has approved
-  contents: read       # actions/checkout to read CODEOWNERS and the shared codeowners.js helper
+  issues: write
+  pull-requests: read
+  contents: read
 
 jobs:
   codeowner-approved:

.github/workflows/codeowner-review-request.yml

@@ -17,10 +17,9 @@ on:
       - release
       - beta
 
-# PR/review writes (requestReviewers, issues.createComment) are performed with the App token minted below,
-# so the workflow's GITHUB_TOKEN only needs read access for checkout.
 permissions:
-  contents: read  # actions/checkout to read CODEOWNERS and the shared codeowners.js helper
+  pull-requests: write
+  contents: read
 
 jobs:
   request-codeowner-reviews:
@@ -33,20 +32,9 @@ jobs:
         with:
           ref: ${{ github.event.pull_request.base.sha }}
 
-      - name: Generate a token
-        id: generate-token
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
-        with:
-          client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
-          private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
-          # Scope the minted App token to the minimum needed by the github-script step below.
-          permission-pull-requests: write  # pulls.listFiles, pulls.get, pulls.listReviews, pulls.requestReviewers
-          permission-issues: write         # issues.listComments and issues.createComment (PR comments use the issues API)
-
       - name: Request reviews from component codeowners
         uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
         with:
-          github-token: ${{ steps.generate-token.outputs.token }}
           script: |
             const { loadCodeowners, getEffectiveOwners } = require('./.github/scripts/codeowners.js');
 

.github/workflows/codeql.yml

@@ -16,9 +16,6 @@ on:
   schedule:
     - cron: "30 18 * * 4"
 
-# Deny by default; the analyze job opts in to exactly what it needs.
-permissions: {}
-
 jobs:
   analyze:
     name: Analyze (${{ matrix.language }})
@@ -29,10 +26,15 @@ jobs:
     # Consider using larger runners or machines with greater resources for possible analysis time improvements.
     runs-on: ${{ (matrix.language == 'swift' && 'macos-latest') || 'ubuntu-latest' }}
     permissions:
-      security-events: write  # upload CodeQL SARIF results to the Code Scanning API
-      packages: read          # fetch internal or private CodeQL query packs
-      actions: read           # required by codeql-action when run from a private repo
-      contents: read          # actions/checkout to scan the repository
+      # required for all workflows
+      security-events: write
+
+      # required to fetch internal or private CodeQL packs
+      packages: read
+
+      # only required for workflows in private repositories
+      actions: read
+      contents: read
 
     strategy:
       fail-fast: false
@@ -56,7 +58,7 @@ jobs:
 
       # Initializes the CodeQL tools for scanning.
       - name: Initialize CodeQL
-        uses: github/codeql-action/init@7211b7c8077ea37d8641b6271f6a365a22a5fbfa # v4.36.0
+        uses: github/codeql-action/init@95e58e9a2cdfd71adc6e0353d5c52f41a045d225 # v4.35.2
         with:
           languages: ${{ matrix.language }}
           build-mode: ${{ matrix.build-mode }}
@@ -84,6 +86,6 @@ jobs:
           exit 1
 
       - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@7211b7c8077ea37d8641b6271f6a365a22a5fbfa # v4.36.0
+        uses: github/codeql-action/analyze@95e58e9a2cdfd71adc6e0353d5c52f41a045d225 # v4.35.2
         with:
           category: "/language:${{matrix.language}}"

.github/workflows/dashboard-deprecation-comment.yml

@@ -1,119 +0,0 @@
-name: Add Dashboard Deprecation Comment
-
-on:
-  pull_request_target:
-    types: [opened, synchronize]
-
-# All API calls (pulls.listFiles + issues.{list,create,update}Comment) are performed with
-# the App token minted below, so the workflow's GITHUB_TOKEN does not need any scopes.
-permissions: {}
-
-jobs:
-  dashboard-deprecation-comment:
-    name: Dashboard deprecation comment
-    runs-on: ubuntu-latest
-    # Release-bump PRs (bump-X.Y.Z -> beta, beta -> release) inevitably
-    # roll up everything merged into dev since the last cut, which can
-    # include dashboard changes that have already been reviewed once.
-    # The bot's purpose is to warn new contributors before they invest
-    # time -- that only applies to PRs entering dev.
-    if: github.event.pull_request.base.ref == 'dev'
-    steps:
-      - name: Generate a token
-        id: generate-token
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
-        with:
-          client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
-          private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
-          # pulls.listFiles + issues.{list,create,update}Comment on PRs. For PR resources
-          # the issues.*Comment APIs require the pull-requests scope, not issues.
-          permission-pull-requests: write
-
-      - name: Add dashboard deprecation comment
-        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
-        with:
-          github-token: ${{ steps.generate-token.outputs.token }}
-          script: |
-            const commentMarker = "<!-- This comment was generated automatically by the dashboard-deprecation-comment workflow. -->";
-
-            const commentBody = `Thanks for opening this PR!
-
-            Heads up: the legacy ESPHome dashboard (\`esphome/dashboard/\` and \`tests/dashboard/\`) is **deprecated** and is being replaced by [ESPHome Device Builder](https://github.com/esphome/device-builder). We are not adding new features to the legacy dashboard and it will eventually be removed from this repository.
-
-            What this means for your PR:
-
-            - **New features / enhancements**: please port the change to [esphome/device-builder](https://github.com/esphome/device-builder) instead. We are unlikely to review or merge new dashboard features here.
-            - **Bug fixes**: small fixes may still be considered, but please check first whether the same issue exists in Device Builder, where the fix will have a longer life.
-            - **Security issues**: please do not file a public PR. Report privately via [GitHub security advisories](https://github.com/esphome/esphome/security/advisories/new) so we can coordinate a fix.
-
-            We appreciate the contribution and apologize for the friction; flagging this early so your time isn't spent on a change that may not land.
-
-            ---
-            (Added by the PR bot)
-
-            ${commentMarker}`;
-
-            async function getDashboardChanges(github, owner, repo, prNumber) {
-                const changedFiles = await github.paginate(
-                    github.rest.pulls.listFiles,
-                    {
-                        owner: owner,
-                        repo: repo,
-                        pull_number: prNumber,
-                        per_page: 100,
-                    }
-                );
-
-                return changedFiles.filter(file =>
-                    file.filename.startsWith('esphome/dashboard/') ||
-                    file.filename.startsWith('tests/dashboard/')
-                );
-            }
-
-            async function findBotComment(github, owner, repo, prNumber) {
-                const comments = await github.paginate(
-                    github.rest.issues.listComments,
-                    {
-                        owner: owner,
-                        repo: repo,
-                        issue_number: prNumber,
-                        per_page: 100,
-                    }
-                );
-
-                return comments.find(comment =>
-                    comment.body.includes(commentMarker) && comment.user.type === "Bot"
-                );
-            }
-
-            const prNumber = context.payload.pull_request.number;
-            const { owner, repo } = context.repo;
-
-            const dashboardChanges = await getDashboardChanges(github, owner, repo, prNumber);
-            const existingComment = await findBotComment(github, owner, repo, prNumber);
-
-            if (dashboardChanges.length === 0) {
-                // PR doesn't (or no longer) touches the legacy dashboard. If we previously
-                // commented (e.g. files were removed in a later push), leave the comment in
-                // place for history rather than thrash on edit/delete.
-                return;
-            }
-
-            if (existingComment) {
-                if (existingComment.body === commentBody) {
-                    return;
-                }
-                await github.rest.issues.updateComment({
-                    owner: owner,
-                    repo: repo,
-                    comment_id: existingComment.id,
-                    body: commentBody,
-                });
-            } else {
-                await github.rest.issues.createComment({
-                    owner: owner,
-                    repo: repo,
-                    issue_number: prNumber,
-                    body: commentBody,
-                });
-            }

.github/workflows/external-component-bot.yml

@@ -4,29 +4,20 @@ on:
   pull_request_target:
     types: [opened, synchronize]
 
-# All API calls (pulls.listFiles + issues.{list,create,update}Comment) are performed with
-# the App token minted below, so the workflow's GITHUB_TOKEN does not need any scopes.
-permissions: {}
+permissions:
+  contents: read       #  Needed to fetch PR details
+  issues: write        #  Needed to create and update comments (PR comments are managed via the issues REST API)
+  pull-requests: write  # also needed?
 
 jobs:
   external-comment:
     name: External component comment
     runs-on: ubuntu-latest
     steps:
-      - name: Generate a token
-        id: generate-token
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
-        with:
-          client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
-          private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
-          # pulls.listFiles + issues.{list,create,update}Comment on PRs. For PR resources
-          # the issues.*Comment APIs require the pull-requests scope, not issues.
-          permission-pull-requests: write
-
       - name: Add external component comment
         uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
         with:
-          github-token: ${{ steps.generate-token.outputs.token }}
+          github-token: ${{ secrets.GITHUB_TOKEN }}
           script: |
             // Generate external component usage instructions
             function generateExternalComponentInstructions(prNumber, componentNames, owner, repo) {

.github/workflows/issue-codeowner-notify.yml

@@ -9,8 +9,8 @@ on:
     types: [labeled]
 
 permissions:
-  issues: write   # issues.createComment to mention component codeowners on the newly labelled issue
-  contents: read  # repos.getContent to fetch CODEOWNERS from the default branch
+  issues: write
+  contents: read
 
 jobs:
   notify-codeowners:

.github/workflows/lock.yml

@@ -6,12 +6,6 @@ on:
     - cron: "30 0 * * *"  # Run daily at 00:30 UTC
   workflow_dispatch:
 
-# Deny by default; the lock job opts in to exactly what the reusable workflow needs.
-permissions: {}
-
 jobs:
   lock:
-    permissions:
-      issues: write         # issues.lock on closed issues
-      pull-requests: write  # issues.lock on closed pull requests
-    uses: esphome/workflows/.github/workflows/lock.yml@025a1e6255610c498ed590403b7e510b69e474df  # 2026.4.1
+    uses: esphome/workflows/.github/workflows/lock.yml@3c4e8446aa1029f1c346a482034b3ee1489077ca  # 2026.4.0

.github/workflows/pr-title-check.yml

@@ -8,8 +8,8 @@ on:
       - beta
 
 permissions:
-  contents: read       # actions/checkout to load detect-tags.js
-  pull-requests: read  # pulls.listFiles to map changed files to component/core/dashboard/ci tags
+  contents: read
+  pull-requests: read
 
 jobs:
   check:
@@ -29,11 +29,10 @@ jobs:
             } = require('./.github/scripts/detect-tags.js');
 
             const title = context.payload.pull_request.title;
-            const user = context.payload.pull_request.user;
+            const author = context.payload.pull_request.user.login;
 
-            // Skip bot PRs (e.g. dependabot, esphome[bot] device-class sync) -
-            // they have their own title formats.
-            if (user.type === 'Bot') {
+            // Skip bot PRs (e.g. dependabot) - they have their own title format
+            if (author === 'dependabot[bot]') {
               return;
             }
 
@@ -69,15 +68,14 @@ jobs:
               return;
             }
 
-            // Check for MDX syntax characters not wrapped in backticks.
-            // Astro docs MDX treats bare `<` as JSX component opening tags and
-            // bare `{` as JS expressions, so both must be escaped in changelog entries.
+            // Check for angle brackets not wrapped in backticks.
+            // Astro docs MDX treats bare < as JSX component opening tags.
             const stripped = title.replace(/`[^`]*`/g, '');
-            if (/[<>{}]/.test(stripped)) {
+            if (/[<>]/.test(stripped)) {
               core.setFailed(
-                'PR title contains `<`, `>`, `{`, or `}` not wrapped in backticks.\n' +
-                'Astro docs MDX interprets bare `<` as JSX components and bare `{` as JS expressions.\n' +
-                'Please wrap these characters with backticks, e.g.: [component] Add `<feature>` support'
+                'PR title contains `<` or `>` not wrapped in backticks.\n' +
+                'Astro docs MDX interprets bare `<` as JSX components.\n' +
+                'Please wrap angle brackets with backticks, e.g.: [component] Add `<feature>` support'
               );
               return;
             }

.github/workflows/release.yml

@@ -9,7 +9,7 @@ on:
     - cron: "0 2 * * *"
 
 permissions:
-  contents: read  # actions/checkout for all jobs; deploy jobs add their own scopes when they need to write
+  contents: read
 
 jobs:
   init:
@@ -57,8 +57,8 @@ jobs:
     if: github.repository == 'esphome/esphome' && github.event_name == 'release'
     runs-on: ubuntu-latest
     permissions:
-      contents: read   # actions/checkout to build the sdist/wheel
-      id-token: write  # OIDC token for PyPI Trusted Publishing (pypa/gh-action-pypi-publish)
+      contents: read
+      id-token: write
     steps:
       - uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
       - name: Set up Python
@@ -78,8 +78,8 @@ jobs:
     name: Build ESPHome ${{ matrix.platform.arch }}
     if: github.repository == 'esphome/esphome'
     permissions:
-      contents: read   # actions/checkout to load Dockerfile and build context
-      packages: write  # docker/login-action + build-push-action push image digests to ghcr.io
+      contents: read
+      packages: write
     runs-on: ${{ matrix.platform.os }}
     needs: [init]
     strategy:
@@ -99,15 +99,15 @@ jobs:
           python-version: "3.11"
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@d7f5e7f509e45cec5c76c4d5afdd7de93d0b3df5 # v4.1.0
+        uses: docker/setup-buildx-action@4d04d5d9486b7bd6fa91e7baf45bbb4f8b9deedd # v4.0.0
 
       - name: Log in to docker hub
-        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
+        uses: docker/login-action@4907a6ddec9925e35a0a9e82d7399ccc52663121 # v4.1.0
         with:
           username: ${{ secrets.DOCKER_USER }}
           password: ${{ secrets.DOCKER_PASSWORD }}
       - name: Log in to the GitHub container registry
-        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
+        uses: docker/login-action@4907a6ddec9925e35a0a9e82d7399ccc52663121 # v4.1.0
         with:
           registry: ghcr.io
           username: ${{ github.actor }}
@@ -152,8 +152,8 @@ jobs:
       - deploy-docker
     if: github.repository == 'esphome/esphome'
     permissions:
-      contents: read   # actions/checkout to load Dockerfile and build context
-      packages: write  # docker/login-action + build-push-action push image digests to ghcr.io
+      contents: read
+      packages: write
     strategy:
       fail-fast: false
       matrix:
@@ -178,17 +178,17 @@ jobs:
           merge-multiple: true
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@d7f5e7f509e45cec5c76c4d5afdd7de93d0b3df5 # v4.1.0
+        uses: docker/setup-buildx-action@4d04d5d9486b7bd6fa91e7baf45bbb4f8b9deedd # v4.0.0
 
       - name: Log in to docker hub
         if: matrix.registry == 'dockerhub'
-        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
+        uses: docker/login-action@4907a6ddec9925e35a0a9e82d7399ccc52663121 # v4.1.0
         with:
           username: ${{ secrets.DOCKER_USER }}
           password: ${{ secrets.DOCKER_PASSWORD }}
       - name: Log in to the GitHub container registry
         if: matrix.registry == 'ghcr'
-        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
+        uses: docker/login-action@4907a6ddec9925e35a0a9e82d7399ccc52663121 # v4.1.0
         with:
           registry: ghcr.io
           username: ${{ github.actor }}
@@ -212,6 +212,72 @@ jobs:
           docker buildx imagetools create $(jq -Rcnr 'inputs | . / "," | map("-t " + .) | join(" ")' <<< "${{ steps.tags.outputs.tags}}") \
             $(printf '${{ steps.tags.outputs.image }}@sha256:%s ' *)
 
+  deploy-ha-addon-repo:
+    if: github.repository == 'esphome/esphome' && needs.init.outputs.branch_build == 'false'
+    runs-on: ubuntu-latest
+    needs:
+      - init
+      - deploy-manifest
+    steps:
+      - name: Generate a token
+        id: generate-token
+        uses: actions/create-github-app-token@1b10c78c7865c340bc4f6099eb2f838309f1e8c3 # v3.1.1
+        with:
+          app-id: ${{ secrets.ESPHOME_GITHUB_APP_ID }}
+          private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
+          owner: esphome
+          repositories: home-assistant-addon
+
+      - name: Trigger Workflow
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
+        with:
+          github-token: ${{ steps.generate-token.outputs.token }}
+          script: |
+            let description = "ESPHome";
+            if (context.eventName == "release") {
+              description = ${{ toJSON(github.event.release.body) }};
+            }
+            github.rest.actions.createWorkflowDispatch({
+              owner: "esphome",
+              repo: "home-assistant-addon",
+              workflow_id: "bump-version.yml",
+              ref: "main",
+              inputs: {
+                version: "${{ needs.init.outputs.tag }}",
+                content: description
+              }
+            })
+
+  deploy-esphome-schema:
+    if: github.repository == 'esphome/esphome' && needs.init.outputs.branch_build == 'false'
+    runs-on: ubuntu-latest
+    needs: [init]
+    environment: ${{ needs.init.outputs.deploy_env }}
+    steps:
+      - name: Generate a token
+        id: generate-token
+        uses: actions/create-github-app-token@1b10c78c7865c340bc4f6099eb2f838309f1e8c3 # v3.1.1
+        with:
+          app-id: ${{ secrets.ESPHOME_GITHUB_APP_ID }}
+          private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
+          owner: esphome
+          repositories: esphome-schema
+
+      - name: Trigger Workflow
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
+        with:
+          github-token: ${{ steps.generate-token.outputs.token }}
+          script: |
+            github.rest.actions.createWorkflowDispatch({
+              owner: "esphome",
+              repo: "esphome-schema",
+              workflow_id: "generate-schemas.yml",
+              ref: "main",
+              inputs: {
+                version: "${{ needs.init.outputs.tag }}",
+              }
+            })
+
   version-notifier:
     if: github.repository == 'esphome/esphome' && needs.init.outputs.branch_build == 'false'
     runs-on: ubuntu-latest
@@ -221,20 +287,19 @@ jobs:
     steps:
       - name: Generate a token
         id: generate-token
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
+        uses: actions/create-github-app-token@1b10c78c7865c340bc4f6099eb2f838309f1e8c3 # v3.1.1
         with:
-          client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
+          app-id: ${{ secrets.ESPHOME_GITHUB_APP_ID }}
           private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
           owner: esphome
           repositories: version-notifier
-          permission-actions: write  # actions.createWorkflowDispatch on the target repo (only API call made with this token)
 
       - name: Trigger Workflow
         uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
         with:
           github-token: ${{ steps.generate-token.outputs.token }}
           script: |
-            await github.rest.actions.createWorkflowDispatch({
+            github.rest.actions.createWorkflowDispatch({
               owner: "esphome",
               repo: "version-notifier",
               workflow_id: "notify.yml",

.github/workflows/stale.yml

@@ -7,8 +7,8 @@ on:
   workflow_dispatch:
 
 permissions:
-  issues: write         # actions/stale labels, comments on, and closes stale issues
-  pull-requests: write  # actions/stale labels, comments on, and closes stale pull requests
+  issues: write
+  pull-requests: write
 
 concurrency:
   group: lock
@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Stale
-        uses: actions/stale@eb5cf3af3ac0a1aa4c9c45633dd1ae542a27a899 # v10.3.0
+        uses: actions/stale@b5d41d4e1d5dceea10e7104786b73624c18a190f # v10.2.0
         with:
           debug-only: ${{ github.ref != 'refs/heads/dev' }} # Dry-run when not run on dev branch
           remove-stale-when-updated: true

.github/workflows/status-check-labels.yml

@@ -4,9 +4,6 @@ on:
   pull_request:
     types: [opened, reopened, labeled, unlabeled, synchronize]
 
-permissions:
-  pull-requests: read  # issues.listLabelsOnIssue to detect blocking labels (needs-docs, merge-after-release, chained-pr)
-
 concurrency:
   group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
   cancel-in-progress: true

.github/workflows/sync-device-classes.yml

@@ -6,27 +6,12 @@ on:
   schedule:
     - cron: "45 6 * * *"
 
-# Repo writes (branch push, PR open) happen via the App token minted below,
-# so the workflow's GITHUB_TOKEN does not need any write scopes.
-permissions:
-  contents: read  # actions/checkout for this repo and home-assistant/core
-
 jobs:
   sync:
     name: Sync Device Classes
     runs-on: ubuntu-latest
     if: github.repository == 'esphome/esphome'
     steps:
-      - name: Generate a token
-        id: generate-token
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
-        with:
-          client-id: ${{ vars.ESPHOME_GITHUB_APP_CLIENT_ID }}
-          private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
-          # Scope the minted App token to the minimum needed by peter-evans/create-pull-request.
-          permission-contents: write       # git.createCommit + refs.create/update to push the sync/device-classes branch
-          permission-pull-requests: write  # pulls.create / pulls.update to open or refresh the sync PR
-
       - name: Checkout
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
 
@@ -41,56 +26,19 @@ jobs:
         with:
           python-version: "3.14"
 
-      - name: Set up uv
-        # An order of magnitude faster than pip on cold boots, with its
-        # own wheel cache. ``--system`` (below) installs into the
-        # setup-python interpreter so subsequent ``pre-commit`` /
-        # ``script/run-in-env.py`` steps find the deps without a
-        # ``uv run`` prefix.
-        uses: astral-sh/setup-uv@08807647e7069bb48b6ef5acd8ec9567f424441b # v8.1.0
-        with:
-          enable-cache: true
-          # Pin uv version so the action does not have to fetch the
-          # manifest from raw.githubusercontent.com on every cache
-          # miss; that fetch flakes on Windows runners.
-          version: "0.11.15"
-
       - name: Install Home Assistant
         run: |
-          uv pip install --system -e lib/home-assistant
-          uv pip install --system -r requirements.txt -r requirements_test.txt pre-commit
+          python -m pip install --upgrade pip
+          pip install -e lib/home-assistant
+          pip install -r requirements_test.txt pre-commit
 
       - name: Sync
         run: |
           python ./script/sync-device_class.py
 
-      - name: Apply pre-commit auto-fixes
-        # First pass: let formatters (ruff, end-of-file-fixer, etc.) modify
-        # files. pre-commit exits non-zero whenever a hook touches anything,
-        # which would otherwise abort the workflow before the auto-fixes
-        # can flow into the sync PR.
-        #
-        # SKIP:
-        #   - no-commit-to-branch is a local guard against committing on
-        #     dev/release/beta; CI runs on dev by definition, and
-        #     peter-evans/create-pull-request creates the branch itself.
-        #   - pylint surfaces import-error / relative-beyond-top-level
-        #     noise here because this workflow installs only a subset of
-        #     the runtime deps (HA + requirements*.txt); main CI already
-        #     gates pylint on real PRs.
-        env:
-          SKIP: pylint,no-commit-to-branch
-        run: python script/run-in-env.py pre-commit run --all-files || true
-
-      - name: Verify pre-commit clean
-        # Second pass: re-run all hooks against the now-fixed tree.
-        # Auto-fixers exit 0 (nothing to change); any remaining failure
-        # from a check-only hook (flake8 / yamllint / ci-custom) is a
-        # real issue and fails the workflow loudly. Same SKIP list as
-        # above for the same reasons.
-        env:
-          SKIP: pylint,no-commit-to-branch
-        run: python script/run-in-env.py pre-commit run --all-files
+      - name: Run pre-commit hooks
+        run: |
+          python script/run-in-env.py pre-commit run --all-files
 
       - name: Commit changes
         uses: peter-evans/create-pull-request@5f6978faf089d4d20b00c7766989d076bb2fc7f1 # v8.1.1
@@ -102,4 +50,4 @@ jobs:
           delete-branch: true
           title: "Synchronise Device Classes from Home Assistant"
           body-path: .github/PULL_REQUEST_TEMPLATE.md
-          token: ${{ steps.generate-token.outputs.token }}
+          token: ${{ secrets.DEVICE_CLASS_SYNC_TOKEN }}

.pre-commit-config.yaml

@@ -11,7 +11,7 @@ ci:
 repos:
   - repo: https://github.com/astral-sh/ruff-pre-commit
     # Ruff version.
-    rev: v0.15.14
+    rev: v0.15.12
     hooks:
       # Run the linter.
       - id: ruff
@@ -55,7 +55,7 @@ repos:
     hooks:
       - id: pylint
         name: pylint
-        entry: python script/run-in-env.py pylint
+        entry: python3 script/run-in-env.py pylint
         language: system
         types: [python]
         files: ^esphome/.+\.py$
@@ -68,5 +68,5 @@ repos:
         additional_dependencies: []
       - id: ci-custom
         name: ci-custom
-        entry: python script/run-in-env.py script/ci-custom.py
+        entry: python3 script/run-in-env.py script/ci-custom.py
         language: system

CLAUDE.md

@@ -1 +1 @@
-AGENTS.md
+.ai/instructions.md

CODEOWNERS

@@ -416,7 +416,6 @@ esphome/components/resampler/speaker/* @kahrendt
 esphome/components/restart/* @esphome/core
 esphome/components/rf_bridge/* @jesserockz
 esphome/components/rgbct/* @jesserockz
-esphome/components/ring_buffer/* @kahrendt
 esphome/components/rp2040/* @jesserockz
 esphome/components/rp2040_ble/* @bdraco
 esphome/components/rp2040_pio_led_strip/* @Papa-DMan

Doxyfile

@@ -48,7 +48,7 @@ PROJECT_NAME           = ESPHome
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 2026.6.0-dev
+PROJECT_NUMBER         = 2026.5.0-dev
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a

GEMINI.md

@@ -1 +1 @@
-AGENTS.md
+.ai/instructions.md

docker/Dockerfile

@@ -13,16 +13,12 @@ RUN git config --system --add safe.directory "*" \
     && git config --system advice.detachedHead false
 
 # Install build tools for Python packages that require compilation
-# (e.g., ruamel.yaml.clib used by ESP-IDF's idf-component-manager).
-# Also install libusb-1.0 at runtime so the ESP-IDF tools installer can
-# validate openocd-esp32 (it dynamically links libusb-1.0.so.0); without
-# it idf_tools.py rejects the openocd install with exit 127 and aborts
-# the whole framework setup.
+# (e.g., ruamel.yaml.clibz used by ESP-IDF's idf-component-manager)
 RUN if command -v apk > /dev/null; then \
-        apk add --no-cache build-base libusb; \
+        apk add --no-cache build-base; \
     else \
         apt-get update \
-        && apt-get install -y --no-install-recommends build-essential libusb-1.0-0 \
+        && apt-get install -y --no-install-recommends build-essential \
         && rm -rf /var/lib/apt/lists/*; \
     fi
 

docker/ha-addon-rootfs/etc/cont-init.d/40-device-builder.sh

@@ -1,22 +0,0 @@
-#!/usr/bin/with-contenv bashio
-# ==============================================================================
-# Installs the latest prerelease of esphome-device-builder when the
-# `use_new_device_builder` config option is enabled.
-# This is a temporary install-on-boot step until esphome-device-builder
-# becomes a direct dependency of esphome.
-# ==============================================================================
-
-if ! bashio::config.true 'use_new_device_builder'; then
-  exit 0
-fi
-
-bashio::log.info "Installing latest prerelease of esphome-device-builder..."
-if command -v uv > /dev/null; then
-  uv pip install --system --no-cache-dir --prerelease=allow --upgrade \
-    esphome-device-builder ||
-    bashio::exit.nok "Failed installing esphome-device-builder."
-else
-  pip install --no-cache-dir --pre --upgrade esphome-device-builder ||
-    bashio::exit.nok "Failed installing esphome-device-builder."
-fi
-bashio::log.info "Installed esphome-device-builder."

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/esphome/run

@@ -49,12 +49,5 @@ if bashio::fs.directory_exists '/config/esphome/.esphome'; then
     rm -rf /config/esphome/.esphome
 fi
 
-if bashio::config.true 'use_new_device_builder'; then
-    bashio::log.info "Starting ESPHome Device Builder..."
-    exec esphome-device-builder /config/esphome \
-        --ha-addon \
-        --ingress-port "$(bashio::addon.ingress_port)"
-fi
-
 bashio::log.info "Starting ESPHome dashboard..."
 exec esphome dashboard /config/esphome --socket /var/run/esphome.sock --ha-addon

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/init-nginx/run

@@ -4,14 +4,6 @@
 # Community Hass.io Add-ons: ESPHome
 # Configures NGINX for use with ESPHome
 # ==============================================================================
-
-# When the new device builder is enabled it serves HA ingress directly,
-# so nginx is not used at all -- skip configuration.
-if bashio::config.true 'use_new_device_builder'; then
-    bashio::log.info "Skipping NGINX setup: new device builder serves ingress directly."
-    bashio::exit.ok
-fi
-
 mkdir -p /var/log/nginx
 
 # Generate Ingress configuration

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/nginx/run

@@ -5,14 +5,6 @@
 # Runs the NGINX proxy
 # ==============================================================================
 
-# The new device builder handles HA ingress itself, so nginx is bypassed.
-# Block the longrun forever so s6 keeps the dependency satisfied and does
-# not respawn it.
-if bashio::config.true 'use_new_device_builder'; then
-    bashio::log.info "NGINX bypassed: new device builder serves ingress directly."
-    exec sleep infinity
-fi
-
 bashio::log.info "Waiting for ESPHome dashboard to come up..."
 
 while [[ ! -S /var/run/esphome.sock ]]; do

esphome/__main__.py

@@ -28,7 +28,6 @@ from esphome.const import (
     ALLOWED_NAME_CHARS,
     ARGUMENT_HELP_DEVICE,
     CONF_API,
-    CONF_AUTH,
     CONF_BAUD_RATE,
     CONF_BROKER,
     CONF_DEASSERT_RTS_DTR,
@@ -48,27 +47,22 @@ from esphome.const import (
     CONF_PORT,
     CONF_SUBSTITUTIONS,
     CONF_TOPIC,
-    CONF_USERNAME,
-    CONF_WEB_SERVER,
-    CONF_WIFI,
     ENV_NOGITIGNORE,
     KEY_CORE,
+    KEY_NATIVE_IDF,
     KEY_TARGET_PLATFORM,
     PLATFORM_ESP32,
     PLATFORM_ESP8266,
     PLATFORM_RP2040,
     SECRETS_FILES,
-    Toolchain,
 )
 from esphome.core import CORE, EsphomeError, coroutine
 from esphome.enum import StrEnum
 from esphome.helpers import get_bool_env, indent, is_ip_address
 from esphome.log import AnsiFore, color, setup_log
 from esphome.types import ConfigType
-from esphome.upload_targets import PortType, get_port_type
 from esphome.util import (
     PICOTOOL_PACKAGE,
-    FlashImage,
     detect_rp2040_bootsel,
     get_picotool_path,
     get_serial_ports,
@@ -157,6 +151,7 @@ class ArgsProtocol(Protocol):
     configuration: str
     name: str
     upload_speed: str | None
+    native_idf: bool
 
 
 def choose_prompt(options, purpose: str = None):
@@ -196,6 +191,14 @@ class Purpose(StrEnum):
     LOGGING = "logging"
 
 
+class PortType(StrEnum):
+    SERIAL = "SERIAL"
+    NETWORK = "NETWORK"
+    MQTT = "MQTT"
+    MQTTIP = "MQTTIP"
+    BOOTSEL = "BOOTSEL"
+
+
 # Magic MQTT port types that require special handling
 _MQTT_PORT_TYPES = frozenset({PortType.MQTT, PortType.MQTTIP})
 
@@ -345,17 +348,6 @@ def choose_upload_log_host(
         elif bootsel.permission_error:
             bootsel_permission_error = True
 
-    # Annotate the OTA chooser entry only in the non-default case: when the
-    # config has web_server OTA but no native API OTA, the upload will fall
-    # through to the HTTP path and the user benefits from seeing that
-    # explicitly. The native-API path is the default and gets a plain label
-    # to avoid noise on the most common scenario. For LOGGING the OTA
-    # transport doesn't apply, so always leave the label plain.
-    if purpose == Purpose.UPLOADING and not has_native_ota() and has_web_server_ota():
-        ota_suffix = " via web_server"
-    else:
-        ota_suffix = ""
-
     def add_ota_options() -> None:
         """Add OTA options, using mDNS discovery if name_add_mac_suffix is enabled."""
         if (discovered := _discover_mac_suffix_devices()) is not None:
@@ -363,11 +355,11 @@ def choose_upload_log_host(
             # intentionally skip the base-name fallback since with
             # name_add_mac_suffix on, the base name doesn't exist on the net.
             for host in discovered:
-                options.append((f"Over The Air{ota_suffix} ({host})", host))
+                options.append((f"Over The Air ({host})", host))
         elif has_resolvable_address():
-            options.append((f"Over The Air{ota_suffix} ({CORE.address})", CORE.address))
+            options.append((f"Over The Air ({CORE.address})", CORE.address))
         if has_mqtt_ip_lookup():
-            options.append((f"Over The Air{ota_suffix} (MQTT IP lookup)", "MQTTIP"))
+            options.append(("Over The Air (MQTT IP lookup)", "MQTTIP"))
 
     if purpose == Purpose.LOGGING:
         if has_mqtt_logging():
@@ -436,19 +428,7 @@ def has_api() -> bool:
 
 
 def has_ota() -> bool:
-    """Check if any network OTA upload is available.
-
-    True if the config exposes either ``platform: esphome`` (native API
-    OTA) or ``platform: web_server`` (HTTP OTA). Both reach the device
-    over the same network stack, so the OTA discovery path treats them
-    interchangeably; ``upload_program`` picks the actual transport based
-    on ``--ota-platform`` and what's configured.
-    """
-    return has_native_ota() or has_web_server_ota()
-
-
-def has_native_ota() -> bool:
-    """Check if native API OTA upload is available (``platform: esphome``)."""
+    """Check if OTA upload is available (requires platform: esphome)."""
     if CONF_OTA not in CORE.config:
         return False
     return any(
@@ -457,16 +437,6 @@ def has_native_ota() -> bool:
     )
 
 
-def has_web_server_ota() -> bool:
-    """Check if web_server OTA upload is available (``platform: web_server``)."""
-    if CONF_OTA not in CORE.config:
-        return False
-    return any(
-        ota_item.get(CONF_PLATFORM) == CONF_WEB_SERVER
-        for ota_item in CORE.config[CONF_OTA]
-    )
-
-
 def has_mqtt_ip_lookup() -> bool:
     """Check if MQTT is available and IP lookup is supported."""
     from esphome.components.mqtt import CONF_DISCOVER_IP
@@ -591,10 +561,33 @@ def _resolve_network_devices(
     return network_devices
 
 
+def get_port_type(port: str) -> PortType:
+    """Determine the type of port/device identifier.
+
+    Returns:
+        PortType.SERIAL for serial ports (/dev/ttyUSB0, COM1, etc.)
+        PortType.BOOTSEL for RP2040 BOOTSEL upload via picotool
+        PortType.MQTT for MQTT logging
+        PortType.MQTTIP for MQTT IP lookup
+        PortType.NETWORK for IP addresses, hostnames, or mDNS names
+    """
+    if port == "BOOTSEL":
+        return PortType.BOOTSEL
+    if port.startswith("/") or port.startswith("COM"):
+        return PortType.SERIAL
+    if port == "MQTT":
+        return PortType.MQTT
+    if port == "MQTTIP":
+        return PortType.MQTTIP
+    return PortType.NETWORK
+
+
 def run_miniterm(config: ConfigType, port: str, args) -> int:
     from aioesphomeapi import LogParser
     import serial
 
+    from esphome import platformio_api
+
     if CONF_LOGGER not in config:
         _LOGGER.info("Logger is not enabled. Not starting UART logs.")
         return 1
@@ -609,11 +602,8 @@ def run_miniterm(config: ConfigType, port: str, args) -> int:
     try:
         module = importlib.import_module("esphome.components." + CORE.target_platform)
         process_stacktrace = getattr(module, "process_stacktrace")
-    except (AttributeError, ImportError):
-        _LOGGER.info(
-            'Stacktrace analysis is unavailable: no compatible analyzer found for target platform "%s".',
-            CORE.target_platform,
-        )
+    except AttributeError:
+        pass
 
     backtrace_state = False
     ser = serial.Serial()
@@ -656,10 +646,14 @@ def run_miniterm(config: ConfigType, port: str, args) -> int:
                             )
                             safe_print(parser.parse_line(line, time_str))
 
-                            if process_stacktrace is not None:
+                            if process_stacktrace:
                                 backtrace_state = process_stacktrace(
                                     config, line, backtrace_state
                                 )
+                            else:
+                                backtrace_state = platformio_api.process_stacktrace(
+                                    config, line, backtrace_state=backtrace_state
+                                )
                     except serial.SerialException:
                         _LOGGER.error("Serial port closed!")
                         return 0
@@ -692,14 +686,17 @@ def _wrap_to_code(name, comp, yaml_util):
     return wrapped
 
 
-def write_cpp(config: ConfigType) -> int:
+def write_cpp(config: ConfigType, native_idf: bool = False) -> int:
     from esphome import writer
 
     if not get_bool_env(ENV_NOGITIGNORE):
         writer.write_gitignore()
 
+    # Store native_idf flag so esp32 component can check it
+    CORE.data[KEY_NATIVE_IDF] = native_idf
+
     generate_cpp_contents(config)
-    return write_cpp_file()
+    return write_cpp_file(native_idf=native_idf)
 
 
 def generate_cpp_contents(config: ConfigType) -> None:
@@ -715,13 +712,13 @@ def generate_cpp_contents(config: ConfigType) -> None:
     CORE.flush_tasks()
 
 
-def write_cpp_file() -> int:
+def write_cpp_file(native_idf: bool = False) -> int:
     from esphome import writer
 
     code_s = indent(CORE.cpp_main_section)
     writer.write_cpp(code_s)
 
-    if CORE.using_toolchain_esp_idf:
+    if native_idf and CORE.is_esp32 and CORE.target_framework == "esp-idf":
         from esphome.build_gen import espidf
 
         espidf.write_project()
@@ -734,40 +731,30 @@ def write_cpp_file() -> int:
 
 
 def compile_program(args: ArgsProtocol, config: ConfigType) -> int:
-    # Keep this gate here, NOT in config validation: device-builder needs
-    # `esphome config` to keep succeeding with placeholders so onboarding can run.
-    if CONF_WIFI in config:
-        from esphome.components.wifi import check_placeholder_credentials
-
-        check_placeholder_credentials(config)
+    native_idf = getattr(args, "native_idf", False)
 
     # NOTE: "Build path:" format is parsed by script/ci_memory_impact_extract.py
     # If you change this format, update the regex in that script as well
     _LOGGER.info("Compiling app... Build path: %s", CORE.build_path)
 
-    module = importlib.import_module("esphome.components." + CORE.target_platform)
-    platform_run_compile = getattr(module, "run_compile", None)
-    if platform_run_compile is not None and platform_run_compile(args, config):
-        pass
-    elif CORE.using_toolchain_esp_idf:
-        from esphome.espidf import toolchain
+    if native_idf and CORE.is_esp32 and CORE.target_framework == "esp-idf":
+        from esphome import espidf_api
 
-        rc = toolchain.run_compile(config, CORE.verbose)
+        rc = espidf_api.run_compile(config, CORE.verbose)
         if rc != 0:
             return rc
 
-        # Create factory.bin, ota.bin, and firmware.elf copy
-        toolchain.create_factory_bin()
-        toolchain.create_ota_bin()
-        toolchain.create_elf_copy()
+        # Create factory.bin and ota.bin
+        espidf_api.create_factory_bin()
+        espidf_api.create_ota_bin()
     else:
-        from esphome.platformio import toolchain
+        from esphome import platformio_api
 
-        rc = toolchain.run_compile(config, CORE.verbose)
+        rc = platformio_api.run_compile(config, CORE.verbose)
         if rc != 0:
             return rc
 
-        idedata = toolchain.get_idedata(config)
+        idedata = platformio_api.get_idedata(config)
         if idedata is None:
             return 1
 
@@ -856,26 +843,22 @@ def _make_crystal_freq_callback(
 def upload_using_esptool(
     config: ConfigType, port: str, file: str, speed: int
 ) -> str | int:
+    from esphome import platformio_api
+
     first_baudrate = speed or config[CONF_ESPHOME][CONF_PLATFORMIO_OPTIONS].get(
         "upload_speed", os.getenv("ESPHOME_UPLOAD_SPEED", "460800")
     )
 
     if file is not None:
-        flash_images = [FlashImage(path=file, offset="0x0")]
-    elif CORE.using_toolchain_esp_idf:
-        from esphome.espidf import toolchain
-
-        flash_images = [
-            FlashImage(path=toolchain.get_factory_firmware_path(), offset="0x0")
-        ]
+        flash_images = [platformio_api.FlashImage(path=file, offset="0x0")]
     else:
-        from esphome.platformio import toolchain
-
-        idedata = toolchain.get_idedata(config)
+        idedata = platformio_api.get_idedata(config)
 
         firmware_offset = "0x10000" if CORE.is_esp32 else "0x0"
         flash_images = [
-            FlashImage(path=idedata.firmware_bin_path, offset=firmware_offset),
+            platformio_api.FlashImage(
+                path=idedata.firmware_bin_path, offset=firmware_offset
+            ),
         ]
         for image in idedata.extra_flash_images:
             if not image.path.is_file():
@@ -944,13 +927,13 @@ def upload_using_esptool(
 
 
 def upload_using_platformio(config: ConfigType, port: str) -> int:
-    from esphome.platformio import toolchain
+    from esphome import platformio_api
 
     # RP2040 platform-raspberrypi build recipe expects firmware.bin.signed for
     # the upload target, but 'nobuild' skips the build phase that creates it.
     # Create it here so the upload doesn't fail.
     if CORE.data.get(KEY_CORE, {}).get(KEY_TARGET_PLATFORM) == PLATFORM_RP2040:
-        idedata = toolchain.get_idedata(config)
+        idedata = platformio_api.get_idedata(config)
         build_dir = Path(idedata.firmware_elf_path).parent
         firmware_bin = build_dir / "firmware.bin"
         signed_bin = build_dir / "firmware.bin.signed"
@@ -960,15 +943,15 @@ def upload_using_platformio(config: ConfigType, port: str) -> int:
     upload_args = ["-t", "upload", "-t", "nobuild"]
     if port is not None:
         upload_args += ["--upload-port", port]
-    return toolchain.run_platformio_cli_run(config, CORE.verbose, *upload_args)
+    return platformio_api.run_platformio_cli_run(config, CORE.verbose, *upload_args)
 
 
 def _find_picotool() -> Path | None:
     """Find the picotool binary from PlatformIO packages."""
-    from esphome.platformio import toolchain
+    from esphome import platformio_api
 
     try:
-        idedata = toolchain.get_idedata(CORE.config)
+        idedata = platformio_api.get_idedata(CORE.config)
     except Exception:  # noqa: BLE001  # pylint: disable=broad-except
         return None
     return get_picotool_path(idedata.cc_path)
@@ -981,9 +964,9 @@ def upload_using_picotool(config: ConfigType) -> int:
     the mass storage copy approach that causes "disk not ejected properly"
     warnings on macOS.
     """
-    from esphome.platformio import toolchain
+    from esphome import platformio_api
 
-    idedata = toolchain.get_idedata(config)
+    idedata = platformio_api.get_idedata(config)
     firmware_elf = Path(idedata.firmware_elf_path)
 
     if not firmware_elf.is_file():
@@ -1108,22 +1091,6 @@ def upload_program(
 
     port_type = get_port_type(host)
 
-    # MQTT and MQTTIP are also OTA paths; MQTTIP gets resolved to a real IP later by
-    # _resolve_network_devices(). Only SERIAL and BOOTSEL are non-OTA upload paths.
-    is_partition_table = getattr(args, "partition_table", False)
-    is_bootloader = getattr(args, "bootloader", False)
-    if is_partition_table and is_bootloader:
-        raise EsphomeError(
-            "The options --partition-table and --bootloader can't be used together."
-        )
-    option_string = "--partition-table" if is_partition_table else "--bootloader"
-    if port_type in (PortType.SERIAL, PortType.BOOTSEL) and (
-        is_partition_table or is_bootloader
-    ):
-        raise EsphomeError(
-            f"The option {option_string} can only be used for Over The Air updates."
-        )
-
     if port_type == PortType.BOOTSEL:
         exit_code = upload_using_picotool(config)
         # Return None for device - BOOTSEL can't be used for logging,
@@ -1143,211 +1110,30 @@ def upload_program(
 
         return exit_code, host if exit_code == 0 else None
 
-    requested_platform = getattr(args, "ota_platform", None)
-    chosen_platform = _choose_ota_platform(config, requested_platform)
-
-    # Resolve MQTT magic strings to actual IP addresses
-    network_devices = _resolve_network_devices(devices, config, args)
-
-    if chosen_platform == CONF_WEB_SERVER:
-        if is_partition_table or is_bootloader:
-            raise EsphomeError(
-                f"{option_string} is only supported with the esphome OTA platform; "
-                "the web_server OTA path can only update the firmware image."
-            )
-        binary = CORE.firmware_bin
-        if getattr(args, "file", None) is not None:
-            binary = Path(args.file)
-        return _upload_via_web_server(config, network_devices, binary)
-
-    return _upload_via_native_api(config, network_devices, args)
-
-
-def _choose_ota_platform(config: ConfigType, requested: str | None) -> str:
-    """Pick the OTA platform to use, optionally honoring ``--ota-platform``.
-
-    Default behavior prefers ``esphome`` (native API) when it is configured.
-    The native API uses challenge-response auth with MD5/SHA256 hashing of a
-    server-issued nonce, so the password is never sent over the wire; the
-    ``web_server`` path uses HTTP Basic auth which transmits credentials in
-    cleartext over the LAN. (The native path also supports gzip compression
-    on ESP8266, where flash space is tight; on ESP32/RP2040/LibreTiny the
-    backend reports ``supports_compression() == false`` and the firmware is
-    sent uncompressed regardless of which platform is used.) Falls back to
-    ``web_server`` only when that is the only available platform.
-    """
-    # Use a dict (insertion-ordered) instead of a list so error messages and
-    # membership checks see one entry per platform even if the user has
-    # multiple ``ota:`` items of the same platform; the web_server OTA
-    # platform's final-validate hook merges duplicates anyway.
-    available: dict[str, None] = {}
+    ota_conf = {}
     for ota_item in config.get(CONF_OTA, []):
-        platform = ota_item.get(CONF_PLATFORM)
-        if platform in (CONF_ESPHOME, CONF_WEB_SERVER):
-            available[platform] = None
-
-    if not available:
-        raise EsphomeError(
-            f"Cannot upload Over the Air as the {CONF_OTA} configuration is not "
-            f"present or does not include {CONF_PLATFORM}: {CONF_ESPHOME} or "
-            f"{CONF_PLATFORM}: {CONF_WEB_SERVER}"
-        )
-
-    if requested is not None:
-        if requested not in available:
-            raise EsphomeError(
-                f"--ota-platform {requested} was requested but the configuration "
-                f"only provides: {', '.join(available)}"
-            )
-        return requested
-
-    if CONF_ESPHOME in available:
-        return CONF_ESPHOME
-    return CONF_WEB_SERVER
-
-
-def _upload_via_native_api(
-    config: ConfigType, network_devices: list[str], args: ArgsProtocol
-) -> tuple[int, str | None]:
-    ota_conf: ConfigType = {}
-    for ota_item in config.get(CONF_OTA, []):
-        if ota_item.get(CONF_PLATFORM) == CONF_ESPHOME:
+        if ota_item[CONF_PLATFORM] == CONF_ESPHOME:
             ota_conf = ota_item
             break
 
+    if not ota_conf:
+        raise EsphomeError(
+            f"Cannot upload Over the Air as the {CONF_OTA} configuration is not present or does not include {CONF_PLATFORM}: {CONF_ESPHOME}"
+        )
+
     from esphome import espota2
 
     remote_port = int(ota_conf[CONF_PORT])
     password = ota_conf.get(CONF_PASSWORD)
-
-    def check_partition_access(option_string: str) -> None:
-        if not ota_conf.get("allow_partition_access"):
-            raise EsphomeError(
-                f"The option {option_string} requires 'allow_partition_access: true' on the "
-                "esphome OTA platform in the device's YAML configuration. Add it, recompile, "
-                f"flash a build with the option enabled, and then retry {option_string}."
-            )
-
-    binary = CORE.firmware_bin
-    ota_type = espota2.OTA_TYPE_UPDATE_APP
-    if getattr(args, "partition_table", False):
-        # Fail fast if the resolved ESPHome OTA config does not enable allow_partition_access.
-        # The device-side handshake also rejects this with "Device only supports app updates",
-        # but checking here surfaces the misconfiguration before opening a network connection.
-        check_partition_access("--partition-table")
-        binary = CORE.partition_table_bin
-        ota_type = espota2.OTA_TYPE_UPDATE_PARTITION_TABLE
-    elif getattr(args, "bootloader", False):
-        check_partition_access("--bootloader")
-        binary = CORE.bootloader_bin
-        ota_type = espota2.OTA_TYPE_UPDATE_BOOTLOADER
     if getattr(args, "file", None) is not None:
         binary = Path(args.file)
+    else:
+        binary = CORE.firmware_bin
 
-    if ota_type == espota2.OTA_TYPE_UPDATE_PARTITION_TABLE:
-        _validate_partition_table_binary(binary)
-    if ota_type == espota2.OTA_TYPE_UPDATE_BOOTLOADER:
-        _validate_bootloader_binary(binary)
+    # Resolve MQTT magic strings to actual IP addresses
+    network_devices = _resolve_network_devices(devices, config, args)
 
-    return espota2.run_ota(network_devices, remote_port, password, binary, ota_type)
-
-
-def _upload_via_web_server(
-    config: ConfigType, network_devices: list[str], binary: Path
-) -> tuple[int, str | None]:
-    web_conf = config.get(CONF_WEB_SERVER)
-    if not web_conf:
-        raise EsphomeError(
-            f"Cannot upload via web_server OTA: the {CONF_WEB_SERVER} component "
-            f"is not configured."
-        )
-
-    remote_port = int(web_conf[CONF_PORT])
-    auth = web_conf.get(CONF_AUTH) or {}
-    username = auth.get(CONF_USERNAME)
-    password = auth.get(CONF_PASSWORD)
-
-    from esphome import web_server_ota
-
-    return web_server_ota.run_ota(
-        network_devices, remote_port, username, password, binary
-    )
-
-
-# Layout of esp_partition_info_t on flash. Each entry is 32 bytes, leading with a
-# 16-bit little-endian magic. ESP-IDF defines ESP_PARTITION_MAGIC = 0x50AA (stored as
-# bytes 0xAA, 0x50) for partition entries and ESP_PARTITION_MAGIC_MD5 = 0xEBEB for the
-# trailing checksum entry. Padding past the last entry is 0xFF. The full table is
-# exactly ESP_PARTITION_TABLE_MAX_LEN bytes.
-_PARTITION_TABLE_MAX_LEN = 0xC00
-_ESP_PARTITION_MAGIC = 0x50AA
-_ESP_PARTITION_MAGIC_MD5 = 0xEBEB
-_ESP_IMAGE_HEADER_MAGIC = 0xE9
-
-
-def _validate_partition_table_binary(binary: Path) -> None:
-    """Validate that ``binary`` looks like an ESP32 partition table image.
-
-    Catches common mistakes (wrong file, truncated build output, swapped --file path)
-    before opening a network connection so the failure mode is a clear local error
-    instead of a post-handshake device rejection.
-    """
-    try:
-        data = binary.read_bytes()
-    except OSError as err:
-        raise EsphomeError(
-            f"Cannot read partition table file '{binary}': {err}"
-        ) from err
-
-    if len(data) != _PARTITION_TABLE_MAX_LEN:
-        raise EsphomeError(
-            f"Partition table file '{binary}' has wrong size: expected "
-            f"{_PARTITION_TABLE_MAX_LEN} bytes, got {len(data)}. "
-            "Pass the partition table image (e.g. partitions.bin / partition-table.bin), "
-            "not the firmware image."
-        )
-
-    first_magic = data[0] | (data[1] << 8)
-    if first_magic != _ESP_PARTITION_MAGIC:
-        raise EsphomeError(
-            f"Partition table file '{binary}' does not start with the expected "
-            f"partition magic 0x{_ESP_PARTITION_MAGIC:04X} (got 0x{first_magic:04X}). "
-            "This file does not look like an ESP32 partition table."
-        )
-
-    # The MD5 checksum entry is required: without it the device-side
-    # esp_partition_table_verify will accept the table but the bootloader will
-    # refuse to boot from it. Scan the 32-byte entries for the MD5 magic.
-    if not any(
-        (data[off] | (data[off + 1] << 8)) == _ESP_PARTITION_MAGIC_MD5
-        for off in range(0, _PARTITION_TABLE_MAX_LEN, 32)
-    ):
-        raise EsphomeError(
-            f"Partition table file '{binary}' is missing the MD5 checksum entry. "
-            "Regenerate the partition table with gen_esp32part.py or rebuild the project."
-        )
-
-
-def _validate_bootloader_binary(binary: Path) -> None:
-    """Validate that ``binary`` looks like an ESP32 bootloader image."""
-    try:
-        data = binary.read_bytes()
-    except OSError as err:
-        raise EsphomeError(f"Cannot read bootloader file '{binary}': {err}") from err
-
-    if not data:
-        raise EsphomeError(
-            f"Bootloader file '{binary}' is empty. "
-            "This file does not look like an ESP32 bootloader."
-        )
-
-    first_magic = data[0]
-    if first_magic != _ESP_IMAGE_HEADER_MAGIC:
-        raise EsphomeError(
-            f"Bootloader file '{binary}' does not start with the expected "
-            f"image header magic 0x{_ESP_IMAGE_HEADER_MAGIC:02X} (got 0x{first_magic:02X}). "
-            "This file does not look like an ESP32 bootloader."
-        )
+    return espota2.run_ota(network_devices, remote_port, password, binary)
 
 
 def show_logs(config: ConfigType, args: ArgsProtocol, devices: list[str]) -> int | None:
@@ -1423,15 +1209,6 @@ def command_config(args: ArgsProtocol, config: ConfigType) -> int | None:
     return 0
 
 
-def command_config_hash(args: ArgsProtocol, config: ConfigType) -> int | None:
-    # generating code might modify config, so it must be done in order to generate
-    # a hash that will match what was generated when compiling and then running
-    # on the device
-    generate_cpp_contents(config)
-    safe_print(f"0x{CORE.config_hash:08x}")
-    return 0
-
-
 def command_vscode(args: ArgsProtocol) -> int | None:
     from esphome import vscode
 
@@ -1441,7 +1218,8 @@ def command_vscode(args: ArgsProtocol) -> int | None:
 
 
 def command_compile(args: ArgsProtocol, config: ConfigType) -> int | None:
-    exit_code = write_cpp(config)
+    native_idf = getattr(args, "native_idf", False)
+    exit_code = write_cpp(config, native_idf=native_idf)
     if exit_code != 0:
         return exit_code
     if args.only_generate:
@@ -1451,14 +1229,9 @@ def command_compile(args: ArgsProtocol, config: ConfigType) -> int | None:
     if exit_code != 0:
         return exit_code
     if CORE.is_host:
-        if CORE.using_toolchain_esp_idf:
-            from esphome.espidf import toolchain
+        from esphome.platformio_api import get_idedata
 
-            program_path = str(toolchain.get_elf_path())
-        else:
-            from esphome.platformio.toolchain import get_idedata
-
-            program_path = str(get_idedata(config).firmware_elf_path)
+        program_path = str(get_idedata(config).firmware_elf_path)
         _LOGGER.info("Successfully compiled program to path '%s'", program_path)
     else:
         _LOGGER.info("Successfully compiled program.")
@@ -1501,7 +1274,8 @@ def command_logs(args: ArgsProtocol, config: ConfigType) -> int | None:
 
 
 def command_run(args: ArgsProtocol, config: ConfigType) -> int | None:
-    exit_code = write_cpp(config)
+    native_idf = getattr(args, "native_idf", False)
+    exit_code = write_cpp(config, native_idf=native_idf)
     if exit_code != 0:
         return exit_code
     exit_code = compile_program(args, config)
@@ -1509,14 +1283,9 @@ def command_run(args: ArgsProtocol, config: ConfigType) -> int | None:
         return exit_code
     _LOGGER.info("Successfully compiled program.")
     if CORE.is_host:
-        if CORE.using_toolchain_esp_idf:
-            from esphome.espidf import toolchain
+        from esphome.platformio_api import get_idedata
 
-            program_path = str(toolchain.get_elf_path())
-        else:
-            from esphome.platformio.toolchain import get_idedata
-
-            program_path = str(get_idedata(config).firmware_elf_path)
+        program_path = str(get_idedata(config).firmware_elf_path)
         _LOGGER.info("Running program from path '%s'", program_path)
         return run_external_process(program_path)
 
@@ -1707,19 +1476,12 @@ def command_update_all(args: ArgsProtocol) -> int | None:
 def command_idedata(args: ArgsProtocol, config: ConfigType) -> int:
     import json
 
-    if not CORE.using_toolchain_platformio:
-        _LOGGER.error(
-            "The idedata command is not compatible with %s toolchain",
-            CORE.toolchain.value,
-        )
-        return 1
-
-    from esphome.platformio import toolchain
+    from esphome import platformio_api
 
     logging.disable(logging.INFO)
     logging.disable(logging.WARNING)
 
-    idedata = toolchain.get_idedata(config)
+    idedata = platformio_api.get_idedata(config)
     if idedata is None:
         return 1
 
@@ -1733,6 +1495,7 @@ def command_analyze_memory(args: ArgsProtocol, config: ConfigType) -> int:
     This command compiles the configuration and performs memory analysis.
     Compilation is fast if sources haven't changed (just relinking).
     """
+    from esphome import platformio_api
     from esphome.analyze_memory.cli import MemoryAnalyzerCLI
     from esphome.analyze_memory.ram_strings import RamStringsAnalyzer
 
@@ -1746,25 +1509,12 @@ def command_analyze_memory(args: ArgsProtocol, config: ConfigType) -> int:
     _LOGGER.info("Successfully compiled program.")
 
     # Get idedata for analysis
-    idedata = None
-    if CORE.using_toolchain_esp_idf:
-        from esphome.espidf import toolchain
+    idedata = platformio_api.get_idedata(config)
+    if idedata is None:
+        _LOGGER.error("Failed to get IDE data for memory analysis")
+        return 1
 
-        objdump_path = str(toolchain.get_objdump_path())
-        readelf_path = str(toolchain.get_readelf_path())
-
-        firmware_elf = toolchain.get_elf_path()
-    else:
-        from esphome.platformio import toolchain
-
-        idedata = toolchain.get_idedata(config)
-        if idedata is None:
-            _LOGGER.error("Failed to get IDE data for memory analysis")
-            return 1
-        objdump_path = idedata.objdump_path
-        readelf_path = idedata.readelf_path
-
-        firmware_elf = Path(idedata.firmware_elf_path)
+    firmware_elf = Path(idedata.firmware_elf_path)
 
     # Extract external components from config
     external_components = detect_external_components(config)
@@ -1774,8 +1524,8 @@ def command_analyze_memory(args: ArgsProtocol, config: ConfigType) -> int:
     _LOGGER.info("Analyzing memory usage...")
     analyzer = MemoryAnalyzerCLI(
         str(firmware_elf),
-        objdump_path,
-        readelf_path,
+        idedata.objdump_path,
+        idedata.readelf_path,
         external_components,
         idedata=idedata,
     )
@@ -1791,7 +1541,7 @@ def command_analyze_memory(args: ArgsProtocol, config: ConfigType) -> int:
     try:
         ram_analyzer = RamStringsAnalyzer(
             str(firmware_elf),
-            objdump_path=objdump_path,
+            objdump_path=idedata.objdump_path,
             platform=CORE.target_platform,
         )
         ram_analyzer.analyze()
@@ -1834,32 +1584,11 @@ def command_rename(args: ArgsProtocol, config: ConfigType) -> int | None:
     old_name = yaml[CONF_ESPHOME][CONF_NAME]
     match = re.match(r"^\$\{?([a-zA-Z0-9_]+)\}?$", old_name)
     if match is None:
-        # Only swap the ``name:`` line that sits directly under the
-        # top-level ``esphome:`` block. A naked ``re.sub`` would
-        # also clobber any other ``name:`` line whose value happens
-        # to match (e.g. a sensor / output / wifi entry sharing the
-        # device's hostname), silently rewriting unrelated user
-        # configuration. The pattern anchors:
-        # - at the start of the line so ``friendly_name:``,
-        #   ``device_name:`` etc. don't match the trailing ``name:``
-        #   substring; and
-        # - at the end of the value (lookahead for whitespace +
-        #   comment + EOL) so ``old_name`` doesn't match as a
-        #   prefix of a longer value (``kitchen`` vs ``kitchen2``).
-        name_pattern = re.compile(
-            rf"^(\s*)name:\s+[\"']?{re.escape(old_name)}[\"']?(?=\s*(?:#|$))"
+        new_raw = re.sub(
+            rf"name:\s+[\"']?{old_name}[\"']?",
+            f'name: "{new_name}"',
+            raw_contents,
         )
-        out_lines: list[str] = []
-        in_esphome_block = False
-        for line in raw_contents.splitlines(keepends=True):
-            if line and not line[0].isspace() and line.strip():
-                in_esphome_block = line.lstrip().startswith("esphome:")
-                out_lines.append(line)
-                continue
-            if in_esphome_block:
-                line = name_pattern.sub(rf'\1name: "{new_name}"', line, count=1)
-            out_lines.append(line)
-        new_raw = "".join(out_lines)
     else:
         old_name = yaml[CONF_SUBSTITUTIONS][match.group(1)]
         if (
@@ -1882,40 +1611,7 @@ def command_rename(args: ArgsProtocol, config: ConfigType) -> int | None:
             flags=re.MULTILINE,
         )
 
-    # ``new_name == old_name`` (after substitution resolution) is
-    # a no-op rewrite that would still queue a pointless re-flash.
-    # Catch it before the path-equality check below — covers the
-    # case where the config filename doesn't match the device name
-    # (e.g. ``weird-file.yaml`` whose ``esphome.name`` is
-    # ``kitchen``; running ``esphome rename weird-file.yaml kitchen``
-    # would otherwise just re-flash the same hostname).
-    if new_name == old_name:
-        print(
-            color(
-                AnsiFore.BOLD_RED,
-                f"'{new_name}' is already the device's name.",
-            )
-        )
-        return 1
-
     new_path: Path = CORE.config_dir / (new_name + ".yaml")
-    if new_path.resolve() == CORE.config_path.resolve():
-        print(
-            color(
-                AnsiFore.BOLD_RED,
-                f"'{new_name}' is already the device's name.",
-            )
-        )
-        return 1
-    if new_path.exists():
-        print(
-            color(
-                AnsiFore.BOLD_RED,
-                f"Cannot rename: {new_path} already exists. "
-                "Refusing to overwrite an existing configuration.",
-            )
-        )
-        return 1
     print(
         f"Updating {color(AnsiFore.CYAN, str(CORE.config_path))} to {color(AnsiFore.CYAN, str(new_path))}"
     )
@@ -1967,7 +1663,6 @@ PRE_CONFIG_ACTIONS = {
 
 POST_CONFIG_ACTIONS = {
     "config": command_config,
-    "config-hash": command_config_hash,
     "compile": command_compile,
     "upload": command_upload,
     "logs": command_logs,
@@ -2037,17 +1732,6 @@ def parse_args(argv):
         action="store_true",
         default=False,
     )
-    options_parser.add_argument(
-        "--toolchain",
-        type=Toolchain,
-        default=None,
-        choices=list(Toolchain),
-        metavar="{" + ",".join(t.value for t in Toolchain) + "}",
-        help=(
-            "Select toolchain for compiling. Overrides '<platform>.toolchain' in YAML. "
-            f"Default: {Toolchain.PLATFORMIO.value}."
-        ),
-    )
 
     parser = argparse.ArgumentParser(
         description=f"ESPHome {const.__version__}", parents=[options_parser]
@@ -2081,13 +1765,6 @@ def parse_args(argv):
         "--show-secrets", help="Show secrets in output.", action="store_true"
     )
 
-    parser_config_hash = subparsers.add_parser(
-        "config-hash", help="Calculate the hash of the configuration."
-    )
-    parser_config_hash.add_argument(
-        "configuration", help="Your YAML configuration file(s).", nargs="+"
-    )
-
     parser_compile = subparsers.add_parser(
         "compile", help="Read the configuration and compile a program."
     )
@@ -2099,6 +1776,11 @@ def parse_args(argv):
         help="Only generate source code, do not compile.",
         action="store_true",
     )
+    parser_compile.add_argument(
+        "--native-idf",
+        help="Build with native ESP-IDF instead of PlatformIO (ESP32 esp-idf framework only).",
+        action="store_true",
+    )
 
     parser_upload = subparsers.add_parser(
         "upload",
@@ -2121,27 +1803,6 @@ def parse_args(argv):
         "--file",
         help="Manually specify the binary file to upload.",
     )
-    parser_upload.add_argument(
-        "--ota-platform",
-        choices=[CONF_ESPHOME, CONF_WEB_SERVER],
-        help=(
-            "OTA platform to use for network uploads. Defaults to "
-            f"'{CONF_ESPHOME}' (native API) when configured because it uses "
-            "challenge-response auth so the password is never sent in "
-            f"cleartext on the wire. Falls back to '{CONF_WEB_SERVER}' "
-            "(HTTP Basic auth) when that is the only configured platform."
-        ),
-    )
-    parser_upload.add_argument(
-        "--partition-table",
-        help="Upload as partition table (OTA).",
-        action="store_true",
-    )
-    parser_upload.add_argument(
-        "--bootloader",
-        help="Upload as bootloader (OTA).",
-        action="store_true",
-    )
 
     parser_logs = subparsers.add_parser(
         "logs",
@@ -2199,13 +1860,6 @@ def parse_args(argv):
     parser_run.add_argument(
         "--no-logs", help="Disable starting logs.", action="store_true"
     )
-
-    parser_run.add_argument(
-        "--no-states",
-        action="store_true",
-        help="Do not show entity state changes in log output.",
-    )
-
     parser_run.add_argument(
         "--reset",
         "-r",
@@ -2214,15 +1868,9 @@ def parse_args(argv):
         default=os.getenv("ESPHOME_SERIAL_LOGGING_RESET"),
     )
     parser_run.add_argument(
-        "--ota-platform",
-        choices=[CONF_ESPHOME, CONF_WEB_SERVER],
-        help=(
-            "OTA platform to use for network uploads. Defaults to "
-            f"'{CONF_ESPHOME}' (native API) when configured because it uses "
-            "challenge-response auth so the password is never sent in "
-            f"cleartext on the wire. Falls back to '{CONF_WEB_SERVER}' "
-            "(HTTP Basic auth) when that is the only configured platform."
-        ),
+        "--native-idf",
+        help="Build with native ESP-IDF instead of PlatformIO (ESP32 esp-idf framework only).",
+        action="store_true",
     )
 
     parser_clean = subparsers.add_parser(
@@ -2435,58 +2083,17 @@ def run_esphome(argv):
 
     CORE.config_path = conf_path
     CORE.dashboard = args.dashboard
-    if args.toolchain is not None:
-        # CLI toolchain wins over esp32.toolchain in YAML.
-        CORE.toolchain = args.toolchain
 
-    # Commands that don't need fresh external components: logs just connects
-    # to the device, and clean is about to delete the build directory.
-    skip_external = args.command in ("logs", "clean")
-    command_line_substitutions = dict(args.substitution) if args.substitution else {}
-
-    # Fast path for upload/logs: reuse the validated-config cache the
-    # last compile wrote. Falls back to read_config when missing/stale.
-    # Skipped when -s overrides are passed, since the cache was written
-    # against the previous substitution set.
-    config: ConfigType | None = None
-    cache_eligible = (
-        args.command in ("upload", "logs") and not command_line_substitutions
+    # For logs command, skip updating external components
+    skip_external = args.command == "logs"
+    config = read_config(
+        dict(args.substitution) if args.substitution else {},
+        skip_external_update=skip_external,
     )
-    if cache_eligible:
-        from esphome.compiled_config import load_compiled_config
-
-        config = load_compiled_config(conf_path)
-        if config is not None:
-            _LOGGER.info(
-                "Loaded validated config cache for %s, skipping validation.",
-                conf_path.name,
-            )
-
-    if config is None:
-        config = read_config(
-            command_line_substitutions,
-            skip_external_update=skip_external,
-        )
-        # Refresh the cache so the next upload/logs hits the fast path
-        # instead of re-running read_config. Skip when the storage
-        # sidecar is absent (no compile has run): the cache would
-        # never be loaded back, so writing secrets to disk is wasted.
-        if cache_eligible and config is not None:
-            from esphome.compiled_config import save_compiled_config
-            from esphome.storage_json import ext_storage_path
-
-            if ext_storage_path(conf_path.name).exists():
-                save_compiled_config(config)
     if config is None:
         return 2
     CORE.config = config
 
-    # Fallback for platforms whose validators didn't set the toolchain
-    # (only the esp32 component reads esp32.framework.toolchain). All
-    # other platforms only support PlatformIO today.
-    if CORE.toolchain is None:
-        CORE.toolchain = Toolchain.PLATFORMIO
-
     if args.command not in POST_CONFIG_ACTIONS:
         safe_print(f"Unknown command {args.command}")
         return 1

esphome/analyze_memory/__init__.py

@@ -24,7 +24,7 @@ from .helpers import (
 from .toolchain import find_tool, resolve_tool_path, run_tool
 
 if TYPE_CHECKING:
-    from esphome.platformio.toolchain import IDEData
+    from esphome.platformio_api import IDEData
 
 _LOGGER = logging.getLogger(__name__)
 

esphome/analyze_memory/cli.py

@@ -739,7 +739,7 @@ def main():
     import json
     from pathlib import Path
 
-    from esphome.platformio.toolchain import IDEData
+    from esphome.platformio_api import IDEData
 
     build_path = Path(build_dir)
 

esphome/build_gen/espidf.py

@@ -3,22 +3,17 @@
 import json
 from pathlib import Path
 
-from esphome.components.esp32 import get_esp32_variant, idf_version
-import esphome.config_validation as cv
+from esphome.components.esp32 import get_esp32_variant
 from esphome.core import CORE
 from esphome.helpers import mkdir_p, write_file_if_changed
-from esphome.writer import update_storage_json
 
 
 def get_available_components() -> list[str] | None:
-    """Get list of built-in ESP-IDF components from project_description.json.
+    """Get list of available ESP-IDF components from project_description.json.
 
-    Excludes ``src``, IDF-managed components (``managed_components/``), and
-    converted PIO libs (``pio_components/``). Returns ``None`` if the build
-    dir or ``project_description.json`` isn't ready yet.
+    Returns only internal ESP-IDF components, excluding external/managed
+    components (from idf_component.yml).
     """
-    if CORE.build_path is None:
-        return None
     project_desc = Path(CORE.build_path) / "build" / "project_description.json"
     if not project_desc.exists():
         return None
@@ -35,9 +30,9 @@ def get_available_components() -> list[str] | None:
             if name == "src":
                 continue
 
-            # Exclude IDF-managed and converted-PIO components (external).
+            # Exclude managed/external components
             comp_dir = info.get("dir", "")
-            if "managed_components" in comp_dir or "pio_components" in comp_dir:
+            if "managed_components" in comp_dir:
                 continue
 
             result.append(name)
@@ -52,90 +47,23 @@ def has_discovered_components() -> bool:
     return get_available_components() is not None
 
 
-def get_project_cmakelists(minimal: bool = False) -> str:
-    """Generate the top-level CMakeLists.txt for ESP-IDF project.
-
-    When ``minimal`` is true, omit ``ESPHOME_PROJECT_BUILTIN_COMPONENTS``
-    since ``project_description.json`` may be stale on the first write.
-    """
+def get_project_cmakelists() -> str:
+    """Generate the top-level CMakeLists.txt for ESP-IDF project."""
     # Get IDF target from ESP32 variant (e.g., ESP32S3 -> esp32s3)
     variant = get_esp32_variant()
     idf_target = variant.lower().replace("-", "")
 
-    # esp_idf_size 2.x (bundled with IDF >=6.0) made NG the default and
-    # removed the --ng flag; on 1.x (IDF 5.5) --ng is required to get
-    # --format=raw because the legacy mode doesn't support it.
-    size_ng_flag = "--ng" if idf_version() < cv.Version(6, 0, 0) else ""
-
-    # Project-wide compile options: -D defines and -W warning flags (skip
-    # -Wl, linker flags — those go on the src component via
-    # target_link_options below). Emitted via idf_build_set_property so the
-    # flags propagate to every IDF component (including managed ones like
-    # esphome__micro-mp3) rather than just src/. Required so suppressions
-    # like ``-Wno-error=maybe-uninitialized`` actually silence warnings in
-    # third-party components we don't author.
-    project_compile_opts = [
-        flag
-        for flag in sorted(CORE.build_flags)
-        if flag.startswith("-D")
-        or (flag.startswith("-W") and not flag.startswith("-Wl,"))
-    ]
+    # Extract compile definitions from build flags (-DXXX -> XXX)
+    compile_defs = [flag for flag in CORE.build_flags if flag.startswith("-D")]
     extra_compile_options = "\n".join(
-        f'idf_build_set_property(COMPILE_OPTIONS "{flag}" APPEND)'
-        for flag in project_compile_opts
-    )
-
-    # Per-project list exposed as a CMake variable so converted PIO libs
-    # can reference ${ESPHOME_PROJECT_MANAGED_COMPONENTS} without baking
-    # project-specific names into their cached CMakeLists.
-    #
-    # Emit via idf_build_set_property (not plain set()) so the value is
-    # serialised into build_properties.temp.cmake and visible to IDF's
-    # early requirements-expansion pass (component_get_requirements.cmake
-    # runs as a separate CMake script invocation that doesn't load the
-    # project's top-level CMakeLists; without this, ${ESPHOME_PROJECT_
-    # MANAGED_COMPONENTS} in a converted-lib REQUIRES expands to empty).
-    from esphome.components.esp32 import get_managed_component_require_names
-
-    managed_components_property = "\n".join(
-        f"idf_build_set_property(ESPHOME_PROJECT_MANAGED_COMPONENTS {name} APPEND)"
-        for name in get_managed_component_require_names()
-    )
-
-    # Built-in IDF components exposed via our own property (not IDF's
-    # __COMPONENT_REQUIRES_COMMON, which would append them to every
-    # component's REQUIRES including real IDF components). Referenced by
-    # src/CMakeLists and by each converted PIO lib's CMakeLists. Skipped
-    # on minimal writes because project_description.json may be stale.
-    builtin_components_property = (
-        ""
-        if minimal
-        else "\n".join(
-            f"idf_build_set_property(ESPHOME_PROJECT_BUILTIN_COMPONENTS {name} APPEND)"
-            for name in sorted(get_available_components() or [])
-        )
+        f'idf_build_set_property(COMPILE_OPTIONS "{compile_def}" APPEND)'
+        for compile_def in compile_defs
     )
 
     return f"""\
 # Auto-generated by ESPHome
 cmake_minimum_required(VERSION 3.16)
 
-# On Windows, Ninja can fail with:
-#   "CreateProcess: The parameter is incorrect (is the command line too long?)"
-# when compiler/linker command lines exceed the OS length limit.
-#
-# The following settings force CMake/Ninja to use *response files* (@file.rsp)
-# to pass long lists of includes, objects, and other arguments indirectly,
-# avoiding command-line length limits and fixing the build failure.
-#
-# This is especially useful for large ESP-IDF / ESPHome projects with many
-# source files or include directories.
-set(CMAKE_C_USE_RESPONSE_FILE_FOR_INCLUDES 1)
-set(CMAKE_CXX_USE_RESPONSE_FILE_FOR_INCLUDES 1)
-set(CMAKE_C_USE_RESPONSE_FILE_FOR_OBJECTS 1)
-set(CMAKE_CXX_USE_RESPONSE_FILE_FOR_OBJECTS 1)
-set(CMAKE_NINJA_FORCE_RESPONSE_FILE 1)
-
 set(IDF_TARGET {idf_target})
 set(EXTRA_COMPONENT_DIRS ${{CMAKE_SOURCE_DIR}}/src)
 
@@ -143,67 +71,50 @@ include($ENV{{IDF_PATH}}/tools/cmake/project.cmake)
 
 {extra_compile_options}
 
-{managed_components_property}
-
-{builtin_components_property}
-
 project({CORE.name})
-
-# Emit raw JSON size data for ESPHome to read post-build.
-add_custom_command(
-    TARGET ${{CMAKE_PROJECT_NAME}}.elf POST_BUILD
-    COMMAND ${{PYTHON}} -m esp_idf_size {size_ng_flag} --format=raw
-            -o ${{CMAKE_BINARY_DIR}}/esp_idf_size.json
-            ${{CMAKE_PROJECT_NAME}}.map
-    WORKING_DIRECTORY ${{CMAKE_BINARY_DIR}}
-    VERBATIM
-)
 """
 
 
-def get_component_cmakelists() -> str:
-    """Generate the main component CMakeLists.txt.
+def get_component_cmakelists(minimal: bool = False) -> str:
+    """Generate the main component CMakeLists.txt."""
+    idf_requires = [] if minimal else (get_available_components() or [])
+    requires_str = " ".join(idf_requires)
 
-    REQUIRES pulls in the discovered built-in IDF components via the
-    project-level variables set in the top-level CMakeLists.
-    """
-    # Extract linker options (-Wl, flags). Compile flags (-D, -W) are
-    # emitted project-wide via idf_build_set_property in
-    # get_project_cmakelists so they reach every component, not just src/.
+    # Extract compile options (-W flags, excluding linker flags)
+    compile_opts = [
+        flag
+        for flag in CORE.build_flags
+        if flag.startswith("-W") and not flag.startswith("-Wl,")
+    ]
+    compile_opts_str = "\n    ".join(sorted(compile_opts)) if compile_opts else ""
+
+    # Extract linker options (-Wl, flags)
     link_opts = [flag for flag in CORE.build_flags if flag.startswith("-Wl,")]
     link_opts_str = "\n    ".join(sorted(link_opts)) if link_opts else ""
 
     return f"""\
 # Auto-generated by ESPHome
-# CONFIGURE_DEPENDS asks CMake to re-check the glob each build so test
-# runs that reuse the build dir don't compile stale source paths. It's
-# invalid in script mode (cmake -P), which is how IDF's
-# component_get_requirements.cmake includes us, so skip it there.
-if(CMAKE_SCRIPT_MODE_FILE)
-    file(GLOB_RECURSE app_sources
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/*.cpp"
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/*.c"
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/esphome/*.cpp"
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/esphome/*.c"
-    )
-else()
-    file(GLOB_RECURSE app_sources CONFIGURE_DEPENDS
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/*.cpp"
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/*.c"
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/esphome/*.cpp"
-        "${{CMAKE_CURRENT_SOURCE_DIR}}/esphome/*.c"
-    )
-endif()
+file(GLOB_RECURSE app_sources
+    "${{CMAKE_CURRENT_SOURCE_DIR}}/*.cpp"
+    "${{CMAKE_CURRENT_SOURCE_DIR}}/*.c"
+    "${{CMAKE_CURRENT_SOURCE_DIR}}/esphome/*.cpp"
+    "${{CMAKE_CURRENT_SOURCE_DIR}}/esphome/*.c"
+)
 
 idf_component_register(
     SRCS ${{app_sources}}
     INCLUDE_DIRS "." "esphome"
-    REQUIRES ${{ESPHOME_PROJECT_BUILTIN_COMPONENTS}}
+    REQUIRES {requires_str}
 )
 
 # Apply C++ standard
 target_compile_features(${{COMPONENT_LIB}} PUBLIC cxx_std_20)
 
+# ESPHome compile options
+target_compile_options(${{COMPONENT_LIB}} PUBLIC
+    {compile_opts_str}
+)
+
 # ESPHome linker options
 target_link_options(${{COMPONENT_LIB}} PUBLIC
     {link_opts_str}
@@ -213,22 +124,17 @@ target_link_options(${{COMPONENT_LIB}} PUBLIC
 
 def write_project(minimal: bool = False) -> None:
     """Write ESP-IDF project files."""
-    # Refresh <data_dir>/storage/<name>.yaml.json so the dashboard's
-    # /info and /downloads endpoints can locate the build (they 404
-    # otherwise). This mirrors the PlatformIO build-gen path's call
-    # in build_gen/platformio.py:write_ini().
-    update_storage_json()
     mkdir_p(CORE.build_path)
     mkdir_p(CORE.relative_src_path())
 
     # Write top-level CMakeLists.txt
     write_file_if_changed(
         CORE.relative_build_path("CMakeLists.txt"),
-        get_project_cmakelists(minimal=minimal),
+        get_project_cmakelists(),
     )
 
     # Write component CMakeLists.txt in src/
     write_file_if_changed(
         CORE.relative_src_path("CMakeLists.txt"),
-        get_component_cmakelists(),
+        get_component_cmakelists(minimal=minimal),
     )

esphome/bundle.py

@@ -98,13 +98,11 @@ _KNOWN_FILE_EXTENSIONS = frozenset(
 )
 
 
-# Matches !secret references in YAML text.  An optional surrounding
-# quote pair around the key is allowed and ignored: YAML treats
-# ``!secret 'foo'`` and ``!secret foo`` as the same key.  This is
-# intentionally a simple regex scan rather than a YAML parse — it may
-# match inside comments or multi-line strings, which is the conservative
-# direction (include more secrets rather than fewer).
-_SECRET_RE = re.compile(r"""!secret\s+['"]?([^\s'"]+)""")
+# Matches !secret references in YAML text.  This is intentionally a simple
+# regex scan rather than a YAML parse — it may match inside comments or
+# multi-line strings, which is the conservative direction (include more
+# secrets rather than fewer).
+_SECRET_RE = re.compile(r"!secret\s+(\S+)")
 
 
 def _find_used_secret_keys(yaml_files: list[Path]) -> set[str]:
@@ -260,20 +258,42 @@ class ConfigBundleCreator:
     def _discover_yaml_includes(self) -> None:
         """Discover YAML files loaded during config parsing.
 
-        Delegates to :func:`yaml_util.discover_user_yaml_files`, which does a
-        fresh re-parse and force-loads every deferred ``IncludeFile`` so that
-        *all* potentially-reachable includes are captured (even branches not
-        selected by local substitutions). Bundles are meant to be compiled on
-        another system where command-line substitution overrides may choose a
-        different branch — e.g. ``!include network/${eth_model}/config.yaml``
-        must ship every candidate so the remote build can pick any one.
+        Deliberately uses a fresh re-parse and force-loads every deferred
+        ``IncludeFile`` to include *all* potentially-reachable includes,
+        even branches not selected by the local substitutions. Bundles are
+        meant to be compiled on another system where command-line
+        substitution overrides may choose a different branch — e.g.
+        ``!include network/${eth_model}/config.yaml`` must ship every
+        candidate so the remote build can pick any one.
+
+        Entries with unresolved substitution variables in the filename
+        path are skipped with a warning (they cannot be resolved without
+        the substitution pass).
+
+        Secrets files are tracked separately so we can filter them to
+        only include the keys this config actually references.
         """
-        discovered = yaml_util.discover_user_yaml_files(self._config_path)
-        self._secrets_paths.update(discovered.secrets)
-        config_resolved = self._config_path.resolve()
-        for fpath in discovered.files:
-            if fpath == config_resolved:
+        # Must be a fresh parse: IncludeFile.load() caches its result in
+        # _content, and we discover files by listening for loader calls. On
+        # an already-parsed tree the cache is populated, .load() returns
+        # without calling the loader, the listener never fires, and the
+        # referenced files would be silently dropped from the bundle.
+        with yaml_util.track_yaml_loads() as loaded_files:
+            try:
+                data = yaml_util.load_yaml(self._config_path)
+            except EsphomeError:
+                _LOGGER.debug(
+                    "Bundle: re-loading YAML for include discovery failed, "
+                    "proceeding with partial file list"
+                )
+            else:
+                _force_load_include_files(data)
+
+        for fpath in loaded_files:
+            if fpath == self._config_path.resolve():
                 continue  # Already added as config
+            if fpath.name in const.SECRETS_FILES:
+                self._secrets_paths.add(fpath)
             self._add_file(fpath)
 
     def _discover_component_files(self) -> None:
@@ -603,6 +623,57 @@ def _add_bytes_to_tar(tar: tarfile.TarFile, name: str, data: bytes) -> None:
     tar.addfile(info, io.BytesIO(data))
 
 
+def _force_load_include_files(obj: Any, _seen: set[int] | None = None) -> None:
+    """Recursively resolve any ``IncludeFile`` instances in a YAML tree.
+
+    Nested ``!include`` returns a deferred ``IncludeFile`` that is only
+    resolved during the substitution pass. During bundle discovery we need
+    the referenced files to actually load so the ``track_yaml_loads``
+    listener fires for them.
+
+    ``IncludeFile`` instances with unresolved substitution variables in the
+    filename cannot be loaded — we skip and warn about those.
+    """
+    if _seen is None:
+        _seen = set()
+
+    if isinstance(obj, yaml_util.IncludeFile):
+        if id(obj) in _seen:
+            return
+        _seen.add(id(obj))
+        if obj.has_unresolved_expressions():
+            _LOGGER.warning(
+                "Bundle: cannot resolve !include %s (referenced from %s) "
+                "with substitutions in path",
+                obj.file,
+                obj.parent_file,
+            )
+            return
+        try:
+            loaded = obj.load()
+        except EsphomeError as err:
+            _LOGGER.warning(
+                "Bundle: failed to load !include %s (referenced from %s): %s",
+                obj.file,
+                obj.parent_file,
+                err,
+            )
+            return
+        _force_load_include_files(loaded, _seen)
+    elif isinstance(obj, dict):
+        if id(obj) in _seen:
+            return
+        _seen.add(id(obj))
+        for value in obj.values():
+            _force_load_include_files(value, _seen)
+    elif isinstance(obj, (list, tuple)):
+        if id(obj) in _seen:
+            return
+        _seen.add(id(obj))
+        for item in obj:
+            _force_load_include_files(item, _seen)
+
+
 def _resolve_include_path(include_path: Any) -> Path | None:
     """Resolve an include path to absolute, skipping system includes."""
     if isinstance(include_path, str) and include_path.startswith("<"):

esphome/compiled_config.py

@@ -1,76 +0,0 @@
-"""Validated-config cache for the upload/logs fast path.
-
-compile dumps the validated config to <data_dir>/storage/<file>.validated.yaml;
-the next upload/logs for that YAML reuses it instead of running the full
-read_config pipeline. YAML round-trip (yaml_util.dump/load_yaml) keeps
-!lambda/!include/IDs/paths intact; mtime gates staleness.
-"""
-
-from __future__ import annotations
-
-import logging
-from pathlib import Path
-
-from esphome.core import CORE
-from esphome.helpers import write_file
-from esphome.storage_json import StorageJSON, ext_storage_path
-from esphome.types import ConfigType
-
-_LOGGER = logging.getLogger(__name__)
-
-
-def compiled_config_path(config_filename: str) -> Path:
-    """Path to the cached validated config alongside the storage sidecar."""
-    return CORE.data_dir / "storage" / f"{config_filename}.validated.yaml"
-
-
-def _cache_is_fresh(cache_path: Path, source_path: Path) -> bool:
-    """True iff the cache file exists and isn't older than the source."""
-    try:
-        return cache_path.stat().st_mtime >= source_path.stat().st_mtime
-    except OSError:
-        return False
-
-
-def save_compiled_config(config: ConfigType) -> None:
-    """Write the validated-config cache. Always-write so mtime stays fresh.
-
-    Mode 0600 because show_secrets=True resolves !secret inline.
-    Failures are non-fatal: the fast path falls back to read_config.
-    """
-    from esphome import yaml_util
-
-    try:
-        rendered = yaml_util.dump(config, show_secrets=True)
-        write_file(compiled_config_path(CORE.config_filename), rendered, private=True)
-    except Exception as err:  # pylint: disable=broad-except
-        _LOGGER.debug("Skipping compiled config cache write: %s", err)
-
-
-def load_compiled_config(conf_path: Path) -> ConfigType | None:
-    """Load the cached validated config and apply storage metadata to CORE.
-
-    Returns None (caller falls back to read_config) when the cache is
-    missing, older than the source YAML, unparseable, or the sidecar
-    is incomplete.
-    """
-    cache_path = compiled_config_path(conf_path.name)
-    if not _cache_is_fresh(cache_path, conf_path):
-        return None
-
-    from esphome import yaml_util
-
-    try:
-        config = yaml_util.load_yaml(cache_path, clear_secrets=False)
-    except Exception:  # pylint: disable=broad-except
-        return None
-
-    storage = StorageJSON.load(ext_storage_path(conf_path.name))
-    if storage is None:
-        return None
-    # apply_to_core assumes a real compile wrote the sidecar; wizard-only
-    # sidecars leave both of these unset and can't drive upload/logs.
-    if not storage.core_platform and not storage.target_platform:
-        return None
-    storage.apply_to_core()
-    return config

esphome/components/a01nyub/a01nyub.cpp

@@ -4,7 +4,8 @@
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
-namespace esphome::a01nyub {
+namespace esphome {
+namespace a01nyub {
 
 static const char *const TAG = "a01nyub.sensor";
 
@@ -41,4 +42,5 @@ void A01nyubComponent::check_buffer_() {
 
 void A01nyubComponent::dump_config() { LOG_SENSOR("", "A01nyub Sensor", this); }
 
-}  // namespace esphome::a01nyub
+}  // namespace a01nyub
+}  // namespace esphome

esphome/components/a01nyub/a01nyub.h

@@ -6,7 +6,8 @@
 #include "esphome/components/sensor/sensor.h"
 #include "esphome/components/uart/uart.h"
 
-namespace esphome::a01nyub {
+namespace esphome {
+namespace a01nyub {
 
 class A01nyubComponent : public sensor::Sensor, public Component, public uart::UARTDevice {
  public:
@@ -22,4 +23,5 @@ class A01nyubComponent : public sensor::Sensor, public Component, public uart::U
   std::vector<uint8_t> buffer_;
 };
 
-}  // namespace esphome::a01nyub
+}  // namespace a01nyub
+}  // namespace esphome

esphome/components/a02yyuw/a02yyuw.cpp

@@ -4,7 +4,8 @@
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
-namespace esphome::a02yyuw {
+namespace esphome {
+namespace a02yyuw {
 
 static const char *const TAG = "a02yyuw.sensor";
 
@@ -40,4 +41,5 @@ void A02yyuwComponent::check_buffer_() {
 
 void A02yyuwComponent::dump_config() { LOG_SENSOR("", "A02yyuw Sensor", this); }
 
-}  // namespace esphome::a02yyuw
+}  // namespace a02yyuw
+}  // namespace esphome

esphome/components/a02yyuw/a02yyuw.h

@@ -6,7 +6,8 @@
 #include "esphome/components/sensor/sensor.h"
 #include "esphome/components/uart/uart.h"
 
-namespace esphome::a02yyuw {
+namespace esphome {
+namespace a02yyuw {
 
 class A02yyuwComponent : public sensor::Sensor, public Component, public uart::UARTDevice {
  public:
@@ -22,4 +23,5 @@ class A02yyuwComponent : public sensor::Sensor, public Component, public uart::U
   std::vector<uint8_t> buffer_;
 };
 
-}  // namespace esphome::a02yyuw
+}  // namespace a02yyuw
+}  // namespace esphome

esphome/components/a4988/a4988.cpp

@@ -1,7 +1,8 @@
 #include "a4988.h"
 #include "esphome/core/log.h"
 
-namespace esphome::a4988 {
+namespace esphome {
+namespace a4988 {
 
 static const char *const TAG = "a4988.stepper";
 
@@ -50,4 +51,5 @@ void A4988::loop() {
   this->step_pin_->digital_write(false);
 }
 
-}  // namespace esphome::a4988
+}  // namespace a4988
+}  // namespace esphome

esphome/components/a4988/a4988.h

@@ -4,7 +4,8 @@
 #include "esphome/core/hal.h"
 #include "esphome/components/stepper/stepper.h"
 
-namespace esphome::a4988 {
+namespace esphome {
+namespace a4988 {
 
 class A4988 : public stepper::Stepper, public Component {
  public:
@@ -24,4 +25,5 @@ class A4988 : public stepper::Stepper, public Component {
   HighFrequencyLoopRequester high_freq_;
 };
 
-}  // namespace esphome::a4988
+}  // namespace a4988
+}  // namespace esphome

esphome/components/adalight/adalight_light_effect.cpp

@@ -1,7 +1,8 @@
 #include "adalight_light_effect.h"
 #include "esphome/core/log.h"
 
-namespace esphome::adalight {
+namespace esphome {
+namespace adalight {
 
 static const char *const TAG = "adalight_light_effect";
 
@@ -137,4 +138,5 @@ AdalightLightEffect::Frame AdalightLightEffect::parse_frame_(light::AddressableL
   return CONSUMED;
 }
 
-}  // namespace esphome::adalight
+}  // namespace adalight
+}  // namespace esphome

esphome/components/adalight/adalight_light_effect.h

@@ -6,7 +6,8 @@
 
 #include <vector>
 
-namespace esphome::adalight {
+namespace esphome {
+namespace adalight {
 
 class AdalightLightEffect : public light::AddressableLightEffect, public uart::UARTDevice {
  public:
@@ -34,4 +35,5 @@ class AdalightLightEffect : public light::AddressableLightEffect, public uart::U
   std::vector<uint8_t> frame_;
 };
 
-}  // namespace esphome::adalight
+}  // namespace adalight
+}  // namespace esphome

esphome/components/adc/adc_sensor.h

@@ -17,7 +17,8 @@
 #include <zephyr/drivers/adc.h>
 #endif
 
-namespace esphome::adc {
+namespace esphome {
+namespace adc {
 
 #ifdef USE_ESP32
 // clang-format off
@@ -161,4 +162,5 @@ class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage
 #endif
 };
 
-}  // namespace esphome::adc
+}  // namespace adc
+}  // namespace esphome

esphome/components/adc/adc_sensor_common.cpp

@@ -1,7 +1,8 @@
 #include "adc_sensor.h"
 #include "esphome/core/log.h"
 
-namespace esphome::adc {
+namespace esphome {
+namespace adc {
 
 static const char *const TAG = "adc.common";
 
@@ -78,4 +79,5 @@ void ADCSensor::set_sample_count(uint8_t sample_count) {
 
 void ADCSensor::set_sampling_mode(SamplingMode sampling_mode) { this->sampling_mode_ = sampling_mode; }
 
-}  // namespace esphome::adc
+}  // namespace adc
+}  // namespace esphome

esphome/components/adc/adc_sensor_esp32.cpp

@@ -4,7 +4,8 @@
 #include "esphome/core/log.h"
 #include <cinttypes>
 
-namespace esphome::adc {
+namespace esphome {
+namespace adc {
 
 static const char *const TAG = "adc.esp32";
 
@@ -363,6 +364,7 @@ float ADCSensor::sample_autorange_() {
   return final_result;
 }
 
-}  // namespace esphome::adc
+}  // namespace adc
+}  // namespace esphome
 
 #endif  // USE_ESP32

esphome/components/adc/adc_sensor_esp8266.cpp

@@ -11,7 +11,8 @@ ADC_MODE(ADC_VCC)
 #include <Arduino.h>
 #endif  // USE_ADC_SENSOR_VCC
 
-namespace esphome::adc {
+namespace esphome {
+namespace adc {
 
 static const char *const TAG = "adc.esp8266";
 
@@ -54,6 +55,7 @@ float ADCSensor::sample() {
   return aggr.aggregate() / 1024.0f;
 }
 
-}  // namespace esphome::adc
+}  // namespace adc
+}  // namespace esphome
 
 #endif  // USE_ESP8266

esphome/components/adc/adc_sensor_libretiny.cpp

@@ -3,7 +3,8 @@
 #include "adc_sensor.h"
 #include "esphome/core/log.h"
 
-namespace esphome::adc {
+namespace esphome {
+namespace adc {
 
 static const char *const TAG = "adc.libretiny";
 
@@ -47,6 +48,7 @@ float ADCSensor::sample() {
   return aggr.aggregate() / 1000.0f;
 }
 
-}  // namespace esphome::adc
+}  // namespace adc
+}  // namespace esphome
 
 #endif  // USE_LIBRETINY

esphome/components/adc/adc_sensor_rp2040.cpp

@@ -15,7 +15,8 @@
 #define PICO_VSYS_PIN 29  // NOLINT(cppcoreguidelines-macro-usage)
 #endif
 
-namespace esphome::adc {
+namespace esphome {
+namespace adc {
 
 static const char *const TAG = "adc.rp2040";
 
@@ -97,6 +98,7 @@ float ADCSensor::sample() {
   return aggr.aggregate() * 3.3f / 4096.0f * coeff;
 }
 
-}  // namespace esphome::adc
+}  // namespace adc
+}  // namespace esphome
 
 #endif  // USE_RP2040

esphome/components/adc/adc_sensor_zephyr.cpp

@@ -5,7 +5,8 @@
 
 #include "hal/nrf_saadc.h"
 
-namespace esphome::adc {
+namespace esphome {
+namespace adc {
 
 static const char *const TAG = "adc.zephyr";
 
@@ -201,5 +202,6 @@ float ADCSensor::sample() {
   return val_mv / 1000.0f;
 }
 
-}  // namespace esphome::adc
+}  // namespace adc
+}  // namespace esphome
 #endif

esphome/components/adc128s102/adc128s102.cpp

@@ -1,7 +1,8 @@
 #include "adc128s102.h"
 #include "esphome/core/log.h"
 
-namespace esphome::adc128s102 {
+namespace esphome {
+namespace adc128s102 {
 
 static const char *const TAG = "adc128s102";
 
@@ -27,4 +28,5 @@ uint16_t ADC128S102::read_data(uint8_t channel) {
   return digital_value;
 }
 
-}  // namespace esphome::adc128s102
+}  // namespace adc128s102
+}  // namespace esphome

esphome/components/adc128s102/adc128s102.h

@@ -4,7 +4,8 @@
 #include "esphome/core/hal.h"
 #include "esphome/components/spi/spi.h"
 
-namespace esphome::adc128s102 {
+namespace esphome {
+namespace adc128s102 {
 
 class ADC128S102 : public Component,
                    public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW, spi::CLOCK_PHASE_LEADING,
@@ -18,4 +19,5 @@ class ADC128S102 : public Component,
   uint16_t read_data(uint8_t channel);
 };
 
-}  // namespace esphome::adc128s102
+}  // namespace adc128s102
+}  // namespace esphome

esphome/components/adc128s102/sensor/adc128s102_sensor.cpp

@@ -2,7 +2,8 @@
 
 #include "esphome/core/log.h"
 
-namespace esphome::adc128s102 {
+namespace esphome {
+namespace adc128s102 {
 
 static const char *const TAG = "adc128s102.sensor";
 
@@ -17,4 +18,5 @@ void ADC128S102Sensor::dump_config() {
 float ADC128S102Sensor::sample() { return this->parent_->read_data(this->channel_); }
 void ADC128S102Sensor::update() { this->publish_state(this->sample()); }
 
-}  // namespace esphome::adc128s102
+}  // namespace adc128s102
+}  // namespace esphome

esphome/components/adc128s102/sensor/adc128s102_sensor.h

@@ -7,7 +7,8 @@
 
 #include "../adc128s102.h"
 
-namespace esphome::adc128s102 {
+namespace esphome {
+namespace adc128s102 {
 
 class ADC128S102Sensor : public PollingComponent,
                          public Parented<ADC128S102>,
@@ -23,4 +24,5 @@ class ADC128S102Sensor : public PollingComponent,
  protected:
   uint8_t channel_;
 };
-}  // namespace esphome::adc128s102
+}  // namespace adc128s102
+}  // namespace esphome

esphome/components/addressable_light/addressable_light_display.cpp

@@ -1,7 +1,8 @@
 #include "addressable_light_display.h"
 #include "esphome/core/log.h"
 
-namespace esphome::addressable_light {
+namespace esphome {
+namespace addressable_light {
 
 static const char *const TAG = "addressable_light.display";
 
@@ -65,4 +66,5 @@ void HOT AddressableLightDisplay::draw_absolute_pixel_internal(int x, int y, Col
     this->addressable_light_buffer_[y * this->get_width_internal() + x] = color;
   }
 }
-}  // namespace esphome::addressable_light
+}  // namespace addressable_light
+}  // namespace esphome

esphome/components/addressable_light/addressable_light_display.h

@@ -7,7 +7,8 @@
 
 #include <vector>
 
-namespace esphome::addressable_light {
+namespace esphome {
+namespace addressable_light {
 
 class AddressableLightDisplay : public display::DisplayBuffer {
  public:
@@ -60,4 +61,5 @@ class AddressableLightDisplay : public display::DisplayBuffer {
   optional<uint32_t> last_effect_index_;
   optional<std::function<int(int, int)>> pixel_mapper_f_;
 };
-}  // namespace esphome::addressable_light
+}  // namespace addressable_light
+}  // namespace esphome

esphome/components/ade7880/ade7880.cpp

@@ -13,7 +13,8 @@
 
 #include <cinttypes>
 
-namespace esphome::ade7880 {
+namespace esphome {
+namespace ade7880 {
 
 static const char *const TAG = "ade7880";
 
@@ -312,4 +313,5 @@ void ADE7880::reset_device_() {
   this->store_.reset_pending = true;
 }
 
-}  // namespace esphome::ade7880
+}  // namespace ade7880
+}  // namespace esphome

esphome/components/ade7880/ade7880.h

@@ -16,7 +16,8 @@
 
 #include "ade7880_registers.h"
 
-namespace esphome::ade7880 {
+namespace esphome {
+namespace ade7880 {
 
 struct NeutralChannel {
   void set_current(sensor::Sensor *sens) { this->current = sens; }
@@ -124,4 +125,5 @@ class ADE7880 : public i2c::I2CDevice, public PollingComponent {
   void write_u32_register16_(uint16_t a_register, uint32_t value);
 };
 
-}  // namespace esphome::ade7880
+}  // namespace ade7880
+}  // namespace esphome

esphome/components/ade7880/ade7880_i2c.cpp

@@ -9,7 +9,8 @@
 
 #include "ade7880.h"
 
-namespace esphome::ade7880 {
+namespace esphome {
+namespace ade7880 {
 
 // adapted from https://stackoverflow.com/a/55912127/1886371
 template<size_t Bits, typename T> inline T sign_extend(const T &v) noexcept {
@@ -96,4 +97,5 @@ void ADE7880::write_u32_register16_(uint16_t a_register, uint32_t value) {
   this->write_register16(a_register, reinterpret_cast<uint8_t *>(&out), sizeof(out));
 }
 
-}  // namespace esphome::ade7880
+}  // namespace ade7880
+}  // namespace esphome

esphome/components/ade7880/ade7880_registers.h

@@ -4,7 +4,8 @@
 
 // Source: https://www.analog.com/media/en/technical-documentation/application-notes/AN-1127.pdf
 
-namespace esphome::ade7880 {
+namespace esphome {
+namespace ade7880 {
 
 // DSP Data Memory RAM registers
 constexpr uint16_t AIGAIN = 0x4380;
@@ -241,4 +242,5 @@ constexpr uint8_t DSPWP_SET_RO = (1 << 7);
 // DSPWP_SEL Register Bits
 constexpr uint8_t DSPWP_SEL_SET = 0xAD;
 
-}  // namespace esphome::ade7880
+}  // namespace ade7880
+}  // namespace esphome

esphome/components/ade7953_base/ade7953_base.cpp

@@ -3,7 +3,8 @@
 
 #include <cinttypes>
 
-namespace esphome::ade7953_base {
+namespace esphome {
+namespace ade7953_base {
 
 static const char *const TAG = "ade7953";
 
@@ -159,4 +160,5 @@ void ADE7953::update() {
   ADE_PUBLISH(frequency, 223750.0f, 1 + val_16);
 }
 
-}  // namespace esphome::ade7953_base
+}  // namespace ade7953_base
+}  // namespace esphome

esphome/components/ade7953_base/ade7953_base.h

@@ -6,7 +6,8 @@
 
 #include <vector>
 
-namespace esphome::ade7953_base {
+namespace esphome {
+namespace ade7953_base {
 
 static constexpr uint8_t PGA_V_8 =
     0x007;  // PGA_V,  (R/W) Default: 0x00, Unsigned, Voltage channel gain configuration (Bits[2:0])
@@ -130,4 +131,5 @@ class ADE7953 : public PollingComponent, public sensor::Sensor {
   virtual bool ade_read_32(uint16_t reg, uint32_t *value) = 0;
 };
 
-}  // namespace esphome::ade7953_base
+}  // namespace ade7953_base
+}  // namespace esphome

esphome/components/ade7953_i2c/ade7953_i2c.cpp

@@ -2,7 +2,8 @@
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
-namespace esphome::ade7953_i2c {
+namespace esphome {
+namespace ade7953_i2c {
 
 static const char *const TAG = "ade7953";
 
@@ -75,4 +76,5 @@ bool AdE7953I2c::ade_read_32(uint16_t reg, uint32_t *value) {
   return false;
 }
 
-}  // namespace esphome::ade7953_i2c
+}  // namespace ade7953_i2c
+}  // namespace esphome

esphome/components/ade7953_i2c/ade7953_i2c.h

@@ -8,7 +8,8 @@
 
 #include <vector>
 
-namespace esphome::ade7953_i2c {
+namespace esphome {
+namespace ade7953_i2c {
 
 class AdE7953I2c : public ade7953_base::ADE7953, public i2c::I2CDevice {
  public:
@@ -23,4 +24,5 @@ class AdE7953I2c : public ade7953_base::ADE7953, public i2c::I2CDevice {
   bool ade_read_32(uint16_t reg, uint32_t *value) override;
 };
 
-}  // namespace esphome::ade7953_i2c
+}  // namespace ade7953_i2c
+}  // namespace esphome

esphome/components/ade7953_spi/ade7953_spi.cpp

@@ -2,7 +2,8 @@
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
-namespace esphome::ade7953_spi {
+namespace esphome {
+namespace ade7953_spi {
 
 static const char *const TAG = "ade7953";
 
@@ -82,4 +83,5 @@ bool AdE7953Spi::ade_read_32(uint16_t reg, uint32_t *value) {
   return false;
 }
 
-}  // namespace esphome::ade7953_spi
+}  // namespace ade7953_spi
+}  // namespace esphome

esphome/components/ade7953_spi/ade7953_spi.h

@@ -8,7 +8,8 @@
 
 #include <vector>
 
-namespace esphome::ade7953_spi {
+namespace esphome {
+namespace ade7953_spi {
 
 class AdE7953Spi : public ade7953_base::ADE7953,
                    public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_HIGH, spi::CLOCK_PHASE_TRAILING,
@@ -27,4 +28,5 @@ class AdE7953Spi : public ade7953_base::ADE7953,
   bool ade_read_32(uint16_t reg, uint32_t *value) override;
 };
 
-}  // namespace esphome::ade7953_spi
+}  // namespace ade7953_spi
+}  // namespace esphome

esphome/components/ads1115/ads1115.cpp

@@ -2,7 +2,8 @@
 #include "esphome/core/hal.h"
 #include "esphome/core/log.h"
 
-namespace esphome::ads1115 {
+namespace esphome {
+namespace ads1115 {
 
 static const char *const TAG = "ads1115";
 static const uint8_t ADS1115_REGISTER_CONVERSION = 0x00;
@@ -207,4 +208,5 @@ float ADS1115Component::request_measurement(ADS1115Multiplexer multiplexer, ADS1
   return millivolts / 1e3f;
 }
 
-}  // namespace esphome::ads1115
+}  // namespace ads1115
+}  // namespace esphome

esphome/components/ads1115/ads1115.h

@@ -5,7 +5,8 @@
 
 #include <vector>
 
-namespace esphome::ads1115 {
+namespace esphome {
+namespace ads1115 {
 
 enum ADS1115Multiplexer {
   ADS1115_MULTIPLEXER_P0_N1 = 0b000,
@@ -59,4 +60,5 @@ class ADS1115Component : public Component, public i2c::I2CDevice {
   bool continuous_mode_;
 };
 
-}  // namespace esphome::ads1115
+}  // namespace ads1115
+}  // namespace esphome

esphome/components/ads1115/sensor/ads1115_sensor.cpp

@@ -2,7 +2,8 @@
 
 #include "esphome/core/log.h"
 
-namespace esphome::ads1115 {
+namespace esphome {
+namespace ads1115 {
 
 static const char *const TAG = "ads1115.sensor";
 
@@ -28,4 +29,5 @@ void ADS1115Sensor::dump_config() {
                 this->multiplexer_, this->gain_, this->resolution_, this->samplerate_);
 }
 
-}  // namespace esphome::ads1115
+}  // namespace ads1115
+}  // namespace esphome

esphome/components/ads1115/sensor/ads1115_sensor.h

@@ -8,7 +8,8 @@
 
 #include "../ads1115.h"
 
-namespace esphome::ads1115 {
+namespace esphome {
+namespace ads1115 {
 
 /// Internal holder class that is in instance of Sensor so that the hub can create individual sensors.
 class ADS1115Sensor : public sensor::Sensor,
@@ -32,4 +33,5 @@ class ADS1115Sensor : public sensor::Sensor,
   ADS1115Samplerate samplerate_;
 };
 
-}  // namespace esphome::ads1115
+}  // namespace ads1115
+}  // namespace esphome

esphome/components/ads1118/ads1118.cpp

@@ -2,7 +2,8 @@
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
-namespace esphome::ads1118 {
+namespace esphome {
+namespace ads1118 {
 
 static const char *const TAG = "ads1118";
 static const uint8_t ADS1118_DATA_RATE_860_SPS = 0b111;
@@ -121,4 +122,5 @@ float ADS1118::request_measurement(ADS1118Multiplexer multiplexer, ADS1118Gain g
   }
 }
 
-}  // namespace esphome::ads1118
+}  // namespace ads1118
+}  // namespace esphome

esphome/components/ads1118/ads1118.h

@@ -4,7 +4,8 @@
 #include "esphome/core/component.h"
 #include "esphome/core/hal.h"
 
-namespace esphome::ads1118 {
+namespace esphome {
+namespace ads1118 {
 
 enum ADS1118Multiplexer {
   ADS1118_MULTIPLEXER_P0_N1 = 0b000,
@@ -40,4 +41,5 @@ class ADS1118 : public Component,
   uint16_t config_{0};
 };
 
-}  // namespace esphome::ads1118
+}  // namespace ads1118
+}  // namespace esphome

esphome/components/ads1118/sensor/ads1118_sensor.cpp

@@ -2,7 +2,8 @@
 
 #include "esphome/core/log.h"
 
-namespace esphome::ads1118 {
+namespace esphome {
+namespace ads1118 {
 
 static const char *const TAG = "ads1118.sensor";
 
@@ -26,4 +27,5 @@ void ADS1118Sensor::update() {
   }
 }
 
-}  // namespace esphome::ads1118
+}  // namespace ads1118
+}  // namespace esphome

esphome/components/ads1118/sensor/ads1118_sensor.h

@@ -8,7 +8,8 @@
 
 #include "../ads1118.h"
 
-namespace esphome::ads1118 {
+namespace esphome {
+namespace ads1118 {
 
 class ADS1118Sensor : public PollingComponent,
                       public sensor::Sensor,
@@ -31,4 +32,5 @@ class ADS1118Sensor : public PollingComponent,
   bool temperature_mode_;
 };
 
-}  // namespace esphome::ads1118
+}  // namespace ads1118
+}  // namespace esphome

esphome/components/ags10/ags10.cpp

@@ -3,7 +3,8 @@
 
 #include <cinttypes>
 
-namespace esphome::ags10 {
+namespace esphome {
+namespace ags10 {
 static const char *const TAG = "ags10";
 
 // Data acquisition.
@@ -191,4 +192,5 @@ template<size_t N> optional<std::array<uint8_t, N>> AGS10Component::read_and_che
 
   return data;
 }
-}  // namespace esphome::ags10
+}  // namespace ags10
+}  // namespace esphome

esphome/components/ags10/ags10.h

@@ -5,7 +5,8 @@
 #include "esphome/core/automation.h"
 #include "esphome/core/component.h"
 
-namespace esphome::ags10 {
+namespace esphome {
+namespace ags10 {
 
 class AGS10Component : public PollingComponent, public i2c::I2CDevice {
  public:
@@ -135,4 +136,5 @@ template<typename... Ts> class AGS10SetZeroPointAction : public Action<Ts...>, p
     }
   }
 };
-}  // namespace esphome::ags10
+}  // namespace ags10
+}  // namespace esphome

esphome/components/aht10/aht10.cpp

@@ -17,7 +17,8 @@
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
-namespace esphome::aht10 {
+namespace esphome {
+namespace aht10 {
 
 static const char *const TAG = "aht10";
 static const uint8_t AHT10_INITIALIZE_CMD[] = {0xE1, 0x08, 0x00};
@@ -159,4 +160,5 @@ void AHT10Component::dump_config() {
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
 }
 
-}  // namespace esphome::aht10
+}  // namespace aht10
+}  // namespace esphome

esphome/components/aht10/aht10.h

@@ -6,7 +6,8 @@
 #include "esphome/components/sensor/sensor.h"
 #include "esphome/components/i2c/i2c.h"
 
-namespace esphome::aht10 {
+namespace esphome {
+namespace aht10 {
 
 enum AHT10Variant { AHT10, AHT20 };
 
@@ -30,4 +31,5 @@ class AHT10Component : public PollingComponent, public i2c::I2CDevice {
   uint32_t start_time_{};
 };
 
-}  // namespace esphome::aht10
+}  // namespace aht10
+}  // namespace esphome

esphome/components/aic3204/aic3204.cpp

@@ -4,7 +4,8 @@
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
-namespace esphome::aic3204 {
+namespace esphome {
+namespace aic3204 {
 
 static const char *const TAG = "aic3204";
 
@@ -166,4 +167,5 @@ bool AIC3204::write_volume_() {
   return true;
 }
 
-}  // namespace esphome::aic3204
+}  // namespace aic3204
+}  // namespace esphome

esphome/components/aic3204/aic3204.h

@@ -6,7 +6,8 @@
 #include "esphome/core/defines.h"
 #include "esphome/core/hal.h"
 
-namespace esphome::aic3204 {
+namespace esphome {
+namespace aic3204 {
 
 // TLV320AIC3204 Register Addresses
 // Page 0
@@ -82,4 +83,5 @@ class AIC3204 : public audio_dac::AudioDac, public Component, public i2c::I2CDev
   float volume_{0};
 };
 
-}  // namespace esphome::aic3204
+}  // namespace aic3204
+}  // namespace esphome

esphome/components/aic3204/automation.h

@@ -4,7 +4,8 @@
 #include "esphome/core/component.h"
 #include "aic3204.h"
 
-namespace esphome::aic3204 {
+namespace esphome {
+namespace aic3204 {
 
 template<typename... Ts> class SetAutoMuteAction : public Action<Ts...> {
  public:
@@ -18,4 +19,5 @@ template<typename... Ts> class SetAutoMuteAction : public Action<Ts...> {
   AIC3204 *aic3204_;
 };
 
-}  // namespace esphome::aic3204
+}  // namespace aic3204
+}  // namespace esphome

esphome/components/airthings_ble/airthings_listener.cpp

@@ -4,7 +4,8 @@
 
 #ifdef USE_ESP32
 
-namespace esphome::airthings_ble {
+namespace esphome {
+namespace airthings_ble {
 
 static const char *const TAG = "airthings_ble";
 
@@ -28,6 +29,7 @@ bool AirthingsListener::parse_device(const esp32_ble_tracker::ESPBTDevice &devic
   return false;
 }
 
-}  // namespace esphome::airthings_ble
+}  // namespace airthings_ble
+}  // namespace esphome
 
 #endif

esphome/components/airthings_ble/airthings_listener.h

@@ -5,13 +5,15 @@
 #include "esphome/core/component.h"
 #include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
 
-namespace esphome::airthings_ble {
+namespace esphome {
+namespace airthings_ble {
 
 class AirthingsListener : public esp32_ble_tracker::ESPBTDeviceListener {
  public:
   bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
 };
 
-}  // namespace esphome::airthings_ble
+}  // namespace airthings_ble
+}  // namespace esphome
 
 #endif

esphome/components/airthings_wave_base/airthings_wave_base.cpp

@@ -6,7 +6,8 @@
 
 #ifdef USE_ESP32
 
-namespace esphome::airthings_wave_base {
+namespace esphome {
+namespace airthings_wave_base {
 
 static const char *const TAG = "airthings_wave_base";
 
@@ -210,6 +211,7 @@ void AirthingsWaveBase::set_response_timeout_() {
   });
 }
 
-}  // namespace esphome::airthings_wave_base
+}  // namespace airthings_wave_base
+}  // namespace esphome
 
 #endif  // USE_ESP32

esphome/components/airthings_wave_base/airthings_wave_base.h

@@ -14,7 +14,8 @@
 #include "esphome/core/component.h"
 #include "esphome/core/log.h"
 
-namespace esphome::airthings_wave_base {
+namespace esphome {
+namespace airthings_wave_base {
 
 namespace espbt = esphome::esp32_ble_tracker;
 
@@ -83,6 +84,7 @@ class AirthingsWaveBase : public PollingComponent, public ble_client::BLEClientN
   };
 };
 
-}  // namespace esphome::airthings_wave_base
+}  // namespace airthings_wave_base
+}  // namespace esphome
 
 #endif  // USE_ESP32

esphome/components/airthings_wave_mini/airthings_wave_mini.cpp

@@ -2,7 +2,8 @@
 
 #ifdef USE_ESP32
 
-namespace esphome::airthings_wave_mini {
+namespace esphome {
+namespace airthings_wave_mini {
 
 static const char *const TAG = "airthings_wave_mini";
 
@@ -48,6 +49,7 @@ AirthingsWaveMini::AirthingsWaveMini() {
       espbt::ESPBTUUID::from_raw(ACCESS_CONTROL_POINT_CHARACTERISTIC_UUID);
 }
 
-}  // namespace esphome::airthings_wave_mini
+}  // namespace airthings_wave_mini
+}  // namespace esphome
 
 #endif  // USE_ESP32

esphome/components/airthings_wave_mini/airthings_wave_mini.h

@@ -4,7 +4,8 @@
 
 #include "esphome/components/airthings_wave_base/airthings_wave_base.h"
 
-namespace esphome::airthings_wave_mini {
+namespace esphome {
+namespace airthings_wave_mini {
 
 namespace espbt = esphome::esp32_ble_tracker;
 
@@ -33,6 +34,7 @@ class AirthingsWaveMini : public airthings_wave_base::AirthingsWaveBase {
   };
 };
 
-}  // namespace esphome::airthings_wave_mini
+}  // namespace airthings_wave_mini
+}  // namespace esphome
 
 #endif  // USE_ESP32

esphome/components/airthings_wave_plus/airthings_wave_plus.cpp

@@ -2,7 +2,8 @@
 
 #ifdef USE_ESP32
 
-namespace esphome::airthings_wave_plus {
+namespace esphome {
+namespace airthings_wave_plus {
 
 static const char *const TAG = "airthings_wave_plus";
 
@@ -97,6 +98,7 @@ void AirthingsWavePlus::setup() {
       espbt::ESPBTUUID::from_raw(access_control_point_characteristic_uuid);
 }
 
-}  // namespace esphome::airthings_wave_plus
+}  // namespace airthings_wave_plus
+}  // namespace esphome
 
 #endif  // USE_ESP32

esphome/components/airthings_wave_plus/airthings_wave_plus.h

@@ -4,7 +4,8 @@
 
 #include "esphome/components/airthings_wave_base/airthings_wave_base.h"
 
-namespace esphome::airthings_wave_plus {
+namespace esphome {
+namespace airthings_wave_plus {
 
 namespace espbt = esphome::esp32_ble_tracker;
 
@@ -57,6 +58,7 @@ class AirthingsWavePlus : public airthings_wave_base::AirthingsWaveBase {
   };
 };
 
-}  // namespace esphome::airthings_wave_plus
+}  // namespace airthings_wave_plus
+}  // namespace esphome
 
 #endif  // USE_ESP32

esphome/components/alpha3/alpha3.cpp

@@ -5,7 +5,8 @@
 
 #ifdef USE_ESP32
 
-namespace esphome::alpha3 {
+namespace esphome {
+namespace alpha3 {
 
 static const char *const TAG = "alpha3";
 
@@ -184,6 +185,7 @@ void Alpha3::update() {
     delay(25);  // need to wait between requests
   }
 }
-}  // namespace esphome::alpha3
+}  // namespace alpha3
+}  // namespace esphome
 
 #endif

esphome/components/alpha3/alpha3.h

@@ -9,7 +9,8 @@
 
 #include <esp_gattc_api.h>
 
-namespace esphome::alpha3 {
+namespace esphome {
+namespace alpha3 {
 
 namespace espbt = esphome::esp32_ble_tracker;
 
@@ -63,6 +64,7 @@ class Alpha3 : public esphome::ble_client::BLEClientNode, public PollingComponen
   void send_request_(uint8_t *request, size_t len);
   bool is_current_response_type_(const uint8_t *response_type);
 };
-}  // namespace esphome::alpha3
+}  // namespace alpha3
+}  // namespace esphome
 
 #endif