Compare commits

..
Author SHA1 Message Date
J. Nick Koston c29ca6323e [qwiic_pir] Use write_byte_16_le for the debounce time 2026-11-17 14:36:10 -06:00
J. Nick Koston 95ca52e270 [qwiic_pir] Send the debounce time little endian
The PIR firmware stores the debounce time little endian, but write_byte_16 sent it big
endian, so the 1 ms default landed as 256 ms and 10 ms as 2560 ms.
2026-11-17 14:26:04 -06:00
J. Nick Koston be9ddd3243 [qwiic_pir] Let the last bus step of each poll set or clear the warning 2026-11-17 13:55:01 -06:00
J. Nick Koston 7256cb5bb0 [qwiic_pir] Set a warning on read failures and tidy the component
A failed event read now sets the component warning instead of logging on every loop
pass. The event register becomes a local read with named bit masks, the mode is a
uint8_t enum class passed to the constructor, and the mode names come from a PROGMEM
string table. The tests use dict-style packages and build every debounce mode.
2026-11-17 13:48:43 -06:00
tomaszduda23andClaude 141789d240 [debug] Fix the debug component on nRF54L boards (#22839)
Co-authored-by: Claude <noreply@anthropic.com>
2026-11-17 17:32:52 +01:00
Bascht74 c4df1b163c [uart] Fix undefined shift in the RP2 hardware UART pin check (#22841) 2026-11-17 09:54:29 -06:00
David WoodhouseandJ. Nick Koston 773afa0bb1 [mqtt] Don't start the broker lookup before the network is up (#22843)
Co-authored-by: J. Nick Koston <nick@home-assistant.io>
2026-11-17 09:53:52 -06:00
tomaszduda23andClaude 9bf2bbc241 [nrf52] Store preferences in ZMS on nRF54L (#22840)
Co-authored-by: Claude <noreply@anthropic.com>
2026-11-17 18:21:54 +03:00
Mattheinrichs 84dea8078b [cst816] Ignore idle 0xFF touch frames and invalid coordinates (#22435) 2026-11-17 08:58:24 -06:00
Jacopo Labardi dbf6af2fd7 [logger] Qualify the host clock function (#22838) 2026-11-17 08:50:19 -06:00
David Woodhouse bc6fb7082f [climate] Don't fail on a platform entry that only holds nested climates (#22844) 2026-11-17 08:49:00 -06:00
tomaszduda23andClaude cfa27cea58 [npm1300] Fix the thermistor resistance error message (#22835)
Co-authored-by: Claude <noreply@anthropic.com>
2026-11-17 17:40:04 +03:00
rwrozelleandClaude Opus 5.5 5c061f9e1e [espidf] Hide the ccache binary in the forced-on, no-binary test (#22842)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 09:29:34 -05:00
Jesse Hills 34b24d0cf5 Merge branch 'beta' into dev 2026-11-17 22:25:16 +13:00
Jesse Hills e27614fda3 Merge pull request #22833 from esphome/bump-2026.11.0b6
2026.11.0b6
2026-11-17 22:24:55 +13:00
J. Nick Koston 8426d04138 [api] Make the event order backpressure test wait until the pipe is full (#22112) 2026-11-17 21:09:01 +13:00
641c8bedc9 [npm1300] Use datasheet defaults, require the thermistor setting for charging, fix charger status (#22769)
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: J. Nick Koston <nick@home-assistant.io>
2026-11-17 09:00:10 +01:00
Jesse Hills 4a39ca1b71 Fix 2026-11-17 20:54:40 +13:00
Jesse Hills 4a218fdbd8 Remove extra test 2026-11-17 20:47:40 +13:00
Jesse Hills d8fc1cd214 Bump version to 2026.11.0b6 2026-11-17 18:54:23 +13:00
J. Nick Koston 1e030b7371 [modem] Set the APN while the SIM is powered down (#22817) 2026-11-17 18:54:20 +13:00
J. Nick Koston 3b113f2c39 [wifi] Join the next network after a failed hidden network probe on ESP32 (#22764) 2026-11-17 18:54:20 +13:00
J. Nick Koston 73468592a9 [remote_base] Fix the Haier and Mirage remote_receiver binary sensors failing to compile 2026-11-17 18:54:06 +13:00
Jonathan Swoboda a1b456150d [esp32][libretiny] Make delay() wait at least the requested time (#22822) 2026-11-17 18:53:11 +13:00
J. Nick Koston 865a883abb [remote_base] Fix the canalsatld binary sensor and trigger build 2026-11-17 18:53:11 +13:00
J. Nick Koston 357a6717c8 [core] Release only the lwIP core lock a LwIPLock took (#22683) 2026-11-17 18:53:11 +13:00
J. Nick Koston bcb434e05e [esp32_ble] Stop Bluedroid re-running a failed queued MTU or execute write request (#22670) 2026-11-17 18:53:11 +13:00
J. Nick Koston fb65fcc5f6 [esp32_power_management] Clamp the tick step after light sleep so it cannot trip vTaskStepTick (#22637) 2026-11-17 18:53:11 +13:00
J. Nick Koston b5e379a9d4 [uart] Stop ESP8266 software serial TX from tripping the Wi-Fi watchdog at 57600 baud (#22641) 2026-11-17 18:53:11 +13:00
J. Nick Kostonandpre-commit-ci-lite[bot] 05286dfd5d [api] Send queued entity states before DisconnectRequest on shutdown (#22625)
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
2026-11-17 18:53:11 +13:00
J. Nick Koston 36184f09aa [zephyr] Count micros() in microseconds and busy-wait in delayMicroseconds() (#22612) 2026-11-17 18:53:11 +13:00
Adam Matthews 449933891e [wifi] Clear the error flag when the adapter restart is skipped (#22797) 2026-11-17 18:53:11 +13:00
Jonathan Swoboda a5bfa6dac3 [esp32_ble] Apply the Bluedroid workarounds to the ESP-IDF 6.1 releases that need them (#22806) 2026-11-17 18:53:11 +13:00
Jonathan Swoboda 5aaa5b0552 [esp32_ble] Replace Bluedroid's sscanf callers on ESP-IDF 6 too (#22805) 2026-11-17 18:53:11 +13:00
J. Nick Koston 9ab090a818 [i2c] Refuse RP2040 writes larger than the Wire buffer instead of leaving the bus stuck (#22791) 2026-11-17 18:53:10 +13:00
J. Nick Koston 02d0bb56a6 [cc1101] Refuse begin_tx in packet mode (#22636) 2026-11-16 22:21:59 -06:00
52 changed files with 1453 additions and 890 deletions

No files matched your search

+4 -10
View File
@@ -515,18 +515,12 @@ void CC1101Component::dump_config() {
}
void CC1101Component::begin_tx() {
this->wake_up();
// Read the mode before the PKTCTRL0 write below overwrites it in state_
const bool packet_mode = this->state_.PKT_FORMAT == static_cast<uint8_t>(PacketFormat::PACKET_FORMAT_FIFO);
// Ensure Packet Format is 3 (Async Serial)
this->write_(Register::PKTCTRL0, 0x32);
if (this->state_.PKT_FORMAT == static_cast<uint8_t>(PacketFormat::PACKET_FORMAT_FIFO)) {
ESP_LOGW(TAG, "begin_tx is for async serial mode; use send_packet in packet mode");
return;
}
ESP_LOGV(TAG, "Beginning TX sequence");
if (this->gdo0_pin_ != nullptr) {
// setup() only attaches the interrupt in packet mode. In async serial mode the pin may be
// shared with remote_receiver, and detaching here would remove the receiver's interrupt.
if (packet_mode) {
this->gdo0_pin_->detach_interrupt();
}
this->gdo0_pin_->pin_mode(gpio::FLAG_OUTPUT);
}
// Transition through IDLE to bypass CCA (Clear Channel Assessment) which can
@@ -63,13 +63,25 @@ void CST816Touchscreen::update_touches() {
uint8_t data[13];
if (!this->status_comm_result(this->read_bytes(REG_STATUS, data, sizeof data)))
return;
uint8_t num_of_touches = data[REG_TOUCH_NUM] & 3;
// The low nibble is the touch count. CST816/CST820 are single-touch;
// CST826/CST836 can report two points, but this driver only reads the first
// point. Some CST8xx controllers report an all-0xFF frame when idle or after
// disabling auto-sleep: the count lands above two and the coordinates are
// the 0xFFF sentinel, so both guards below reject it.
uint8_t num_of_touches = low_nibble(data[REG_TOUCH_NUM]);
if (num_of_touches == 0) {
return;
}
if (num_of_touches > 2) {
return;
}
uint16_t x = encode_uint16(low_nibble(data[REG_XPOS_HIGH]), data[REG_XPOS_LOW]);
uint16_t y = encode_uint16(low_nibble(data[REG_YPOS_HIGH]), data[REG_YPOS_LOW]);
if (x == 0x0FFF || y == 0x0FFF) {
return;
}
ESP_LOGV(TAG, "Read touch %d/%d", x, y);
this->add_raw_touch_position_(0, x, y);
}
+2
View File
@@ -94,5 +94,7 @@ FILTER_SOURCE_FILES = filter_source_files_from_platform(
PlatformFramework.LN882X_ARDUINO,
},
"debug_zephyr.cpp": {PlatformFramework.NRF52_ZEPHYR},
"debug_nrf52.cpp": {PlatformFramework.NRF52_ZEPHYR},
"debug_nrf54l.cpp": {PlatformFramework.NRF52_ZEPHYR},
}
)
+380
View File
@@ -0,0 +1,380 @@
#include "debug_component.h"
#ifdef USE_ZEPHYR
#include <nrfx.h>
#endif
#if defined(USE_ZEPHYR) && !defined(NRF54L_SERIES)
#include <cinttypes>
#include <cstdint>
#include "esphome/core/helpers.h"
#include "esphome/core/log.h"
#include <hal/nrf_power.h>
#define BOOTLOADER_VERSION_REGISTER NRF_TIMER2->CC[0]
namespace esphome::debug {
ESPHOME_LOG_TAG(TAG, "debug");
// Check if an nRF peripheral's ENABLE register indicates it is enabled.
// periph: peripheral register prefix (e.g. USBD, UARTE, SPI)
// reg: register block pointer (e.g. NRF_USBD, NRF_UARTE0)
#define NRF_PERIPH_ENABLED(periph, reg) \
YESNO(((reg)->ENABLE & periph##_ENABLE_ENABLE_Msk) == (periph##_ENABLE_ENABLE_Enabled << periph##_ENABLE_ENABLE_Pos))
constexpr std::uintptr_t MBR_PARAM_PAGE_ADDR = 0xFFC;
constexpr std::uintptr_t MBR_BOOTLOADER_ADDR = 0xFF8;
static inline uint32_t read_mem_u32(uintptr_t addr) {
// NOLINTNEXTLINE(performance-no-int-to-ptr,clang-analyzer-core.FixedAddressDereference)
return *reinterpret_cast<volatile uint32_t *>(addr);
}
static inline uint8_t read_mem_u8(uintptr_t addr) {
// NOLINTNEXTLINE(performance-no-int-to-ptr,clang-analyzer-core.FixedAddressDereference)
return *reinterpret_cast<volatile uint8_t *>(addr);
}
// defines from https://github.com/adafruit/Adafruit_nRF52_Bootloader which prints those information
constexpr uint32_t SD_MAGIC_NUMBER = 0x51B1E5DB;
constexpr uintptr_t MBR_SIZE = 0x1000;
constexpr uintptr_t SOFTDEVICE_INFO_STRUCT_OFFSET = 0x2000;
constexpr uintptr_t SD_ID_OFFSET = SOFTDEVICE_INFO_STRUCT_OFFSET + 0x10;
constexpr uintptr_t SD_VERSION_OFFSET = SOFTDEVICE_INFO_STRUCT_OFFSET + 0x14;
static inline bool is_sd_present() {
return read_mem_u32(SOFTDEVICE_INFO_STRUCT_OFFSET + MBR_SIZE + 4) == SD_MAGIC_NUMBER;
}
static inline uint32_t sd_id_get() {
if (read_mem_u8(MBR_SIZE + SOFTDEVICE_INFO_STRUCT_OFFSET) > (SD_ID_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) {
return read_mem_u32(MBR_SIZE + SD_ID_OFFSET);
}
return 0;
}
static inline uint32_t sd_version_get() {
if (read_mem_u8(MBR_SIZE + SOFTDEVICE_INFO_STRUCT_OFFSET) > (SD_VERSION_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) {
return read_mem_u32(MBR_SIZE + SD_VERSION_OFFSET);
}
return 0;
}
#ifdef ESPHOME_LOG_HAS_VERBOSE
// NOLINTBEGIN(clang-analyzer-core.FixedAddressDereference) -- nRF peripheral registers are MMIO at fixed addresses
static void log_peripherals_info() {
// most peripherals are enabled only when in use so ESP_LOGV is enough
ESP_LOGV(TAG, "Peripherals status:");
ESP_LOGV(TAG, " USBD: %-3s| UARTE0: %-3s| UARTE1: %-3s| UART0: %-3s", //
NRF_PERIPH_ENABLED(USBD, NRF_USBD), NRF_PERIPH_ENABLED(UARTE, NRF_UARTE0),
NRF_PERIPH_ENABLED(UARTE, NRF_UARTE1), NRF_PERIPH_ENABLED(UART, NRF_UART0));
ESP_LOGV(TAG, " TWIS0: %-3s| TWIS1: %-3s| TWIM0: %-3s| TWIM1: %-3s", //
NRF_PERIPH_ENABLED(TWIS, NRF_TWIS0), NRF_PERIPH_ENABLED(TWIS, NRF_TWIS1),
NRF_PERIPH_ENABLED(TWIM, NRF_TWIM0), NRF_PERIPH_ENABLED(TWIM, NRF_TWIM1));
ESP_LOGV(TAG, " TWI0: %-3s| TWI1: %-3s| COMP: %-3s| CCM: %-3s", //
NRF_PERIPH_ENABLED(TWI, NRF_TWI0), NRF_PERIPH_ENABLED(TWI, NRF_TWI1), NRF_PERIPH_ENABLED(COMP, NRF_COMP),
NRF_PERIPH_ENABLED(CCM, NRF_CCM));
ESP_LOGV(TAG, " PDM: %-3s| SPIS0: %-3s| SPIS1: %-3s| SPIS2: %-3s", //
NRF_PERIPH_ENABLED(PDM, NRF_PDM), NRF_PERIPH_ENABLED(SPIS, NRF_SPIS0), NRF_PERIPH_ENABLED(SPIS, NRF_SPIS1),
NRF_PERIPH_ENABLED(SPIS, NRF_SPIS2));
ESP_LOGV(TAG, " SPIM0: %-3s| SPIM1: %-3s| SPIM2: %-3s| SPIM3: %-3s", //
NRF_PERIPH_ENABLED(SPIM, NRF_SPIM0), NRF_PERIPH_ENABLED(SPIM, NRF_SPIM1),
NRF_PERIPH_ENABLED(SPIM, NRF_SPIM2), NRF_PERIPH_ENABLED(SPIM, NRF_SPIM3));
ESP_LOGV(TAG, " SPI0: %-3s| SPI1: %-3s| SPI2: %-3s| SAADC: %-3s", //
NRF_PERIPH_ENABLED(SPI, NRF_SPI0), NRF_PERIPH_ENABLED(SPI, NRF_SPI1), NRF_PERIPH_ENABLED(SPI, NRF_SPI2),
NRF_PERIPH_ENABLED(SAADC, NRF_SAADC));
ESP_LOGV(TAG, " QSPI: %-3s| QDEC: %-3s| LPCOMP: %-3s| I2S: %-3s", //
NRF_PERIPH_ENABLED(QSPI, NRF_QSPI), NRF_PERIPH_ENABLED(QDEC, NRF_QDEC),
NRF_PERIPH_ENABLED(LPCOMP, NRF_LPCOMP), NRF_PERIPH_ENABLED(I2S, NRF_I2S));
ESP_LOGV(TAG, " PWM0: %-3s| PWM1: %-3s| PWM2: %-3s| PWM3: %-3s", //
NRF_PERIPH_ENABLED(PWM, NRF_PWM0), NRF_PERIPH_ENABLED(PWM, NRF_PWM1), NRF_PERIPH_ENABLED(PWM, NRF_PWM2),
NRF_PERIPH_ENABLED(PWM, NRF_PWM3));
ESP_LOGV(TAG, " AAR: %-3s| QSPI deep power-down:%-3s| CRYPTOCELL: %-3s", NRF_PERIPH_ENABLED(AAR, NRF_AAR),
YESNO((NRF_QSPI->IFCONFIG0 & QSPI_IFCONFIG0_DPMENABLE_Msk) ==
(QSPI_IFCONFIG0_DPMENABLE_Enable << QSPI_IFCONFIG0_DPMENABLE_Pos)),
YESNO((NRF_CRYPTOCELL->ENABLE & CRYPTOCELL_ENABLE_ENABLE_Msk) ==
(CRYPTOCELL_ENABLE_ENABLE_Enabled << CRYPTOCELL_ENABLE_ENABLE_Pos)));
}
// NOLINTEND(clang-analyzer-core.FixedAddressDereference)
#endif
static const char *regout0_to_str(uint32_t value) {
switch (value) {
case (UICR_REGOUT0_VOUT_DEFAULT):
return "1.8V (default)";
case (UICR_REGOUT0_VOUT_1V8):
return "1.8V";
case (UICR_REGOUT0_VOUT_2V1):
return "2.1V";
case (UICR_REGOUT0_VOUT_2V4):
return "2.4V";
case (UICR_REGOUT0_VOUT_2V7):
return "2.7V";
case (UICR_REGOUT0_VOUT_3V0):
return "3.0V";
case (UICR_REGOUT0_VOUT_3V3):
return "3.3V";
default:
break;
}
return "???V";
}
size_t DebugComponent::get_device_info_(std::span<char, DEVICE_INFO_BUFFER_SIZE> buffer, size_t pos) {
constexpr size_t size = DEVICE_INFO_BUFFER_SIZE;
char *buf = buffer.data();
// Main supply status
// NOLINTNEXTLINE(clang-analyzer-core.FixedAddressDereference) -- NRF_POWER is MMIO at a fixed address
auto regstatus = nrf_power_mainregstatus_get(NRF_POWER);
const char *supply_status = (regstatus == NRF_POWER_MAINREGSTATUS_NORMAL) ? "Normal voltage." : "High voltage.";
ESP_LOGD(TAG, "Main supply status: %s", supply_status);
pos = buf_append_str(buf, size, pos, "|Main supply status: ");
pos = buf_append_str(buf, size, pos, supply_status);
// Regulator stage 0
if (nrf_power_mainregstatus_get(NRF_POWER) == NRF_POWER_MAINREGSTATUS_HIGH) {
const char *reg0_type = nrf_power_dcdcen_vddh_get(NRF_POWER) ? "DC/DC" : "LDO";
const char *reg0_voltage = regout0_to_str((NRF_UICR->REGOUT0 & UICR_REGOUT0_VOUT_Msk) >> UICR_REGOUT0_VOUT_Pos);
ESP_LOGD(TAG, "Regulator stage 0: %s, %s", reg0_type, reg0_voltage);
pos = buf_append_str(buf, size, pos, "|Regulator stage 0: ");
pos = buf_append_str(buf, size, pos, reg0_type);
pos = buf_append_str(buf, size, pos, ", ");
pos = buf_append_str(buf, size, pos, reg0_voltage);
#ifdef USE_NRF52_REG0_VOUT
if ((NRF_UICR->REGOUT0 & UICR_REGOUT0_VOUT_Msk) >> UICR_REGOUT0_VOUT_Pos != USE_NRF52_REG0_VOUT) {
ESP_LOGE(TAG, "Regulator stage 0: expected %s", regout0_to_str(USE_NRF52_REG0_VOUT));
}
#endif
} else {
ESP_LOGD(TAG, "Regulator stage 0: disabled");
pos = buf_append_str(buf, size, pos, "|Regulator stage 0: disabled");
}
// Regulator stage 1
const char *reg1_type = nrf_power_dcdcen_get(NRF_POWER) ? "DC/DC" : "LDO";
ESP_LOGD(TAG, "Regulator stage 1: %s", reg1_type);
pos = buf_append_str(buf, size, pos, "|Regulator stage 1: ");
pos = buf_append_str(buf, size, pos, reg1_type);
// USB power state
const char *usb_state;
if (nrf_power_usbregstatus_vbusdet_get(NRF_POWER)) {
usb_state = nrf_power_usbregstatus_outrdy_get(NRF_POWER) ? "ready" : "connected (regulator is not ready)";
} else {
usb_state = "disconnected";
}
ESP_LOGD(TAG, "USB power state: %s", usb_state);
pos = buf_append_str(buf, size, pos, "|USB power state: ");
pos = buf_append_str(buf, size, pos, usb_state);
// Power-fail comparator
bool enabled;
nrf_power_pof_thr_t pof_thr = nrf_power_pofcon_get(NRF_POWER, &enabled);
if (enabled) {
const char *pof_voltage;
switch (pof_thr) {
case POWER_POFCON_THRESHOLD_V17:
pof_voltage = "1.7V";
break;
case POWER_POFCON_THRESHOLD_V18:
pof_voltage = "1.8V";
break;
case POWER_POFCON_THRESHOLD_V19:
pof_voltage = "1.9V";
break;
case POWER_POFCON_THRESHOLD_V20:
pof_voltage = "2.0V";
break;
case POWER_POFCON_THRESHOLD_V21:
pof_voltage = "2.1V";
break;
case POWER_POFCON_THRESHOLD_V22:
pof_voltage = "2.2V";
break;
case POWER_POFCON_THRESHOLD_V23:
pof_voltage = "2.3V";
break;
case POWER_POFCON_THRESHOLD_V24:
pof_voltage = "2.4V";
break;
case POWER_POFCON_THRESHOLD_V25:
pof_voltage = "2.5V";
break;
case POWER_POFCON_THRESHOLD_V26:
pof_voltage = "2.6V";
break;
case POWER_POFCON_THRESHOLD_V27:
pof_voltage = "2.7V";
break;
case POWER_POFCON_THRESHOLD_V28:
pof_voltage = "2.8V";
break;
default:
pof_voltage = "???V";
break;
}
if (nrf_power_mainregstatus_get(NRF_POWER) == NRF_POWER_MAINREGSTATUS_HIGH) {
const char *vddh_voltage;
switch (nrf_power_pofcon_vddh_get(NRF_POWER)) {
case NRF_POWER_POFTHRVDDH_V27:
vddh_voltage = "2.7V";
break;
case NRF_POWER_POFTHRVDDH_V28:
vddh_voltage = "2.8V";
break;
case NRF_POWER_POFTHRVDDH_V29:
vddh_voltage = "2.9V";
break;
case NRF_POWER_POFTHRVDDH_V30:
vddh_voltage = "3.0V";
break;
case NRF_POWER_POFTHRVDDH_V31:
vddh_voltage = "3.1V";
break;
case NRF_POWER_POFTHRVDDH_V32:
vddh_voltage = "3.2V";
break;
case NRF_POWER_POFTHRVDDH_V33:
vddh_voltage = "3.3V";
break;
case NRF_POWER_POFTHRVDDH_V34:
vddh_voltage = "3.4V";
break;
case NRF_POWER_POFTHRVDDH_V35:
vddh_voltage = "3.5V";
break;
case NRF_POWER_POFTHRVDDH_V36:
vddh_voltage = "3.6V";
break;
case NRF_POWER_POFTHRVDDH_V37:
vddh_voltage = "3.7V";
break;
case NRF_POWER_POFTHRVDDH_V38:
vddh_voltage = "3.8V";
break;
case NRF_POWER_POFTHRVDDH_V39:
vddh_voltage = "3.9V";
break;
case NRF_POWER_POFTHRVDDH_V40:
vddh_voltage = "4.0V";
break;
case NRF_POWER_POFTHRVDDH_V41:
vddh_voltage = "4.1V";
break;
case NRF_POWER_POFTHRVDDH_V42:
vddh_voltage = "4.2V";
break;
default:
vddh_voltage = "???V";
break;
}
ESP_LOGD(TAG, "Power-fail comparator: %s, VDDH: %s", pof_voltage, vddh_voltage);
pos = buf_append_str(buf, size, pos, "|Power-fail comparator: ");
pos = buf_append_str(buf, size, pos, pof_voltage);
pos = buf_append_str(buf, size, pos, ", VDDH: ");
pos = buf_append_str(buf, size, pos, vddh_voltage);
} else {
ESP_LOGD(TAG, "Power-fail comparator: %s", pof_voltage);
pos = buf_append_str(buf, size, pos, "|Power-fail comparator: ");
pos = buf_append_str(buf, size, pos, pof_voltage);
}
} else {
ESP_LOGD(TAG, "Power-fail comparator: disabled");
pos = buf_append_str(buf, size, pos, "|Power-fail comparator: disabled");
}
auto package = [](uint32_t value) {
switch (value) {
case 0x2004:
return "QIxx - 7x7 73-pin aQFN";
case 0x2000:
return "QFxx - 6x6 48-pin QFN";
case 0x2005:
return "CKxx - 3.544 x 3.607 WLCSP";
default:
break;
}
return "Unspecified";
};
char mac_pretty[MAC_ADDRESS_PRETTY_BUFFER_SIZE];
get_mac_address_pretty_into_buffer(mac_pretty);
ESP_LOGD(TAG,
"nRF debug info:\n"
" Code page size: %u, code size: %u, device id: 0x%08x%08x\n"
" Encryption root: 0x%08x%08x%08x%08x, Identity Root: 0x%08x%08x%08x%08x\n"
" Device address type: %s, address: %s\n"
" Part code: nRF%x, version: %c%c%c%c, package: %s\n"
" RAM: %ukB, Flash: %ukB, production test: %sdone",
NRF_FICR->CODEPAGESIZE, NRF_FICR->CODESIZE, NRF_FICR->DEVICEID[1], NRF_FICR->DEVICEID[0], NRF_FICR->ER[0],
NRF_FICR->ER[1], NRF_FICR->ER[2], NRF_FICR->ER[3], NRF_FICR->IR[0], NRF_FICR->IR[1], NRF_FICR->IR[2],
NRF_FICR->IR[3], (NRF_FICR->DEVICEADDRTYPE & 0x1 ? LOG_STR_LITERAL("Random") : LOG_STR_LITERAL("Public")),
mac_pretty, NRF_FICR->INFO.PART, NRF_FICR->INFO.VARIANT >> 24 & 0xFF, NRF_FICR->INFO.VARIANT >> 16 & 0xFF,
NRF_FICR->INFO.VARIANT >> 8 & 0xFF, NRF_FICR->INFO.VARIANT & 0xFF, package(NRF_FICR->INFO.PACKAGE),
NRF_FICR->INFO.RAM, NRF_FICR->INFO.FLASH,
(NRF_FICR->PRODTEST[0] == 0xBB42319F ? LOG_STR_LITERAL("") : LOG_STR_LITERAL("not ")));
bool n_reset_enabled = NRF_UICR->PSELRESET[0] == NRF_UICR->PSELRESET[1] &&
(NRF_UICR->PSELRESET[0] & UICR_PSELRESET_CONNECT_Msk) == UICR_PSELRESET_CONNECT_Connected
<< UICR_PSELRESET_CONNECT_Pos;
ESP_LOGD(
TAG, " GPIO as NFC pins: %s, GPIO as nRESET pin: %s",
YESNO((NRF_UICR->NFCPINS & UICR_NFCPINS_PROTECT_Msk) == (UICR_NFCPINS_PROTECT_NFC << UICR_NFCPINS_PROTECT_Pos)),
YESNO(n_reset_enabled));
if (n_reset_enabled) {
uint8_t port = (NRF_UICR->PSELRESET[0] & UICR_PSELRESET_PORT_Msk) >> UICR_PSELRESET_PORT_Pos;
uint8_t pin = (NRF_UICR->PSELRESET[0] & UICR_PSELRESET_PIN_Msk) >> UICR_PSELRESET_PIN_Pos;
ESP_LOGD(TAG, " nRESET port P%u.%02u", port, pin);
}
#ifdef USE_BOOTLOADER_MCUBOOT
ESP_LOGD(TAG, " Bootloader: mcuboot");
#else
ESP_LOGD(TAG, " Bootloader: Adafruit, version %u.%u.%u", (BOOTLOADER_VERSION_REGISTER >> 16) & 0xFF,
(BOOTLOADER_VERSION_REGISTER >> 8) & 0xFF, BOOTLOADER_VERSION_REGISTER & 0xFF);
ESP_LOGD(TAG, " MBR bootloader addr 0x%08x, UICR bootloader addr 0x%08x", read_mem_u32(MBR_BOOTLOADER_ADDR),
NRF_UICR->NRFFW[0]);
ESP_LOGD(TAG, " MBR param page addr 0x%08x, UICR param page addr 0x%08x", read_mem_u32(MBR_PARAM_PAGE_ADDR),
NRF_UICR->NRFFW[1]);
if (is_sd_present()) {
uint32_t const sd_id = sd_id_get();
uint32_t const sd_version = sd_version_get();
uint32_t ver[3];
ver[0] = sd_version / 1000000;
ver[1] = (sd_version - ver[0] * 1000000) / 1000;
ver[2] = (sd_version - ver[0] * 1000000 - ver[1] * 1000);
ESP_LOGD(TAG, " SoftDevice: S%u %u.%u.%u", sd_id, ver[0], ver[1], ver[2]);
#ifdef USE_SOFTDEVICE_ID
#ifdef USE_SOFTDEVICE_VERSION
if (USE_SOFTDEVICE_ID != sd_id || USE_SOFTDEVICE_VERSION != ver[0]) {
ESP_LOGE(TAG, "Built for SoftDevice S%u %u.x.y. It may crash due to mismatch of bootloader version.",
USE_SOFTDEVICE_ID, USE_SOFTDEVICE_VERSION);
}
#else
if (USE_SOFTDEVICE_ID != sd_id) {
ESP_LOGE(TAG, "Built for SoftDevice S%u. It may crash due to mismatch of bootloader version.", USE_SOFTDEVICE_ID);
}
#endif
#endif
}
#endif
// 13 words of 8 hex digits, separated by spaces
char uicr_buf[13 * 9];
auto uicr = [&uicr_buf](volatile uint32_t *data, uint8_t size) {
size_t len = 0;
for (size_t i = 0; i < size; i++) {
len = buf_append_printf(uicr_buf, sizeof(uicr_buf), len, i > 0 ? " %08" PRIX32 : "%08" PRIX32, data[i]);
}
return uicr_buf;
};
ESP_LOGD(TAG, " NRFFW %s", uicr(NRF_UICR->NRFFW, 13));
ESP_LOGD(TAG, " NRFHW %s", uicr(NRF_UICR->NRFHW, 12));
#ifdef ESPHOME_LOG_HAS_VERBOSE
log_peripherals_info();
#endif
return pos;
}
#undef NRF_PERIPH_ENABLED
} // namespace esphome::debug
#endif
+113
View File
@@ -0,0 +1,113 @@
#include "debug_component.h"
#ifdef USE_ZEPHYR
#include <nrfx.h>
#endif
#if defined(USE_ZEPHYR) && defined(NRF54L_SERIES)
#include <cinttypes>
#include "esphome/core/helpers.h"
#include "esphome/core/log.h"
namespace esphome::debug {
ESPHOME_LOG_TAG(TAG, "debug");
// Check if an nRF peripheral's ENABLE register indicates it is enabled.
// periph: peripheral register prefix (e.g. USBD, UARTE, SPI)
// reg: register block pointer (e.g. NRF_USBD, NRF_UARTE0)
#define NRF_PERIPH_ENABLED(periph, reg) \
YESNO(((reg)->ENABLE & periph##_ENABLE_ENABLE_Msk) == (periph##_ENABLE_ENABLE_Enabled << periph##_ENABLE_ENABLE_Pos))
#ifdef ESPHOME_LOG_HAS_VERBOSE
// NOLINTBEGIN(clang-analyzer-core.FixedAddressDereference) -- nRF peripheral registers are MMIO at fixed addresses
static void log_peripherals_info() {
// most peripherals are enabled only when in use so ESP_LOGV is enough
// UARTE, SPIM, SPIS, TWIM and TWIS with the same number share one instance
ESP_LOGV(TAG, "Peripherals status:");
ESP_LOGV(TAG, " UARTE00: %-3s| UARTE20: %-3s| UARTE21: %-3s| UARTE22: %-3s| UARTE30: %-3s", //
NRF_PERIPH_ENABLED(UARTE, NRF_UARTE00), NRF_PERIPH_ENABLED(UARTE, NRF_UARTE20),
NRF_PERIPH_ENABLED(UARTE, NRF_UARTE21), NRF_PERIPH_ENABLED(UARTE, NRF_UARTE22),
NRF_PERIPH_ENABLED(UARTE, NRF_UARTE30));
ESP_LOGV(TAG, " SPIM00: %-3s| SPIM20: %-3s| SPIM21: %-3s| SPIM22: %-3s| SPIM30: %-3s", //
NRF_PERIPH_ENABLED(SPIM, NRF_SPIM00), NRF_PERIPH_ENABLED(SPIM, NRF_SPIM20),
NRF_PERIPH_ENABLED(SPIM, NRF_SPIM21), NRF_PERIPH_ENABLED(SPIM, NRF_SPIM22),
NRF_PERIPH_ENABLED(SPIM, NRF_SPIM30));
ESP_LOGV(TAG, " SPIS00: %-3s| SPIS20: %-3s| SPIS21: %-3s| SPIS22: %-3s| SPIS30: %-3s", //
NRF_PERIPH_ENABLED(SPIS, NRF_SPIS00), NRF_PERIPH_ENABLED(SPIS, NRF_SPIS20),
NRF_PERIPH_ENABLED(SPIS, NRF_SPIS21), NRF_PERIPH_ENABLED(SPIS, NRF_SPIS22),
NRF_PERIPH_ENABLED(SPIS, NRF_SPIS30));
ESP_LOGV(TAG, " TWIM20: %-3s| TWIM21: %-3s| TWIM22: %-3s| TWIM30: %-3s", //
NRF_PERIPH_ENABLED(TWIM, NRF_TWIM20), NRF_PERIPH_ENABLED(TWIM, NRF_TWIM21),
NRF_PERIPH_ENABLED(TWIM, NRF_TWIM22), NRF_PERIPH_ENABLED(TWIM, NRF_TWIM30));
ESP_LOGV(TAG, " TWIS20: %-3s| TWIS21: %-3s| TWIS22: %-3s| TWIS30: %-3s", //
NRF_PERIPH_ENABLED(TWIS, NRF_TWIS20), NRF_PERIPH_ENABLED(TWIS, NRF_TWIS21),
NRF_PERIPH_ENABLED(TWIS, NRF_TWIS22), NRF_PERIPH_ENABLED(TWIS, NRF_TWIS30));
ESP_LOGV(TAG, " PWM20: %-3s| PWM21: %-3s| PWM22: %-3s| SAADC: %-3s", //
NRF_PERIPH_ENABLED(PWM, NRF_PWM20), NRF_PERIPH_ENABLED(PWM, NRF_PWM21), NRF_PERIPH_ENABLED(PWM, NRF_PWM22),
NRF_PERIPH_ENABLED(SAADC, NRF_SAADC));
ESP_LOGV(TAG, " PDM20: %-3s| PDM21: %-3s| QDEC20: %-3s| QDEC21: %-3s", //
NRF_PERIPH_ENABLED(PDM, NRF_PDM20), NRF_PERIPH_ENABLED(PDM, NRF_PDM21), NRF_PERIPH_ENABLED(QDEC, NRF_QDEC20),
NRF_PERIPH_ENABLED(QDEC, NRF_QDEC21));
ESP_LOGV(TAG, " COMP: %-3s| LPCOMP: %-3s| AAR00: %-3s| CCM00: %-3s", //
NRF_PERIPH_ENABLED(COMP, NRF_COMP), NRF_PERIPH_ENABLED(LPCOMP, NRF_LPCOMP),
NRF_PERIPH_ENABLED(AAR, NRF_AAR00), NRF_PERIPH_ENABLED(CCM, NRF_CCM00));
}
// NOLINTEND(clang-analyzer-core.FixedAddressDereference)
#endif
// NOLINTBEGIN(clang-analyzer-core.FixedAddressDereference) -- nRF registers are MMIO at fixed addresses
size_t DebugComponent::get_device_info_(std::span<char, DEVICE_INFO_BUFFER_SIZE> buffer, size_t pos) {
constexpr size_t size = DEVICE_INFO_BUFFER_SIZE;
char *buf = buffer.data();
// Main regulator
const char *reg_type = (NRF_REGULATORS->VREGMAIN.DCDCEN & REGULATORS_VREGMAIN_DCDCEN_VAL_Msk) ==
(REGULATORS_VREGMAIN_DCDCEN_VAL_Enabled << REGULATORS_VREGMAIN_DCDCEN_VAL_Pos)
? "DC/DC"
: "LDO";
ESP_LOGD(TAG, "Main regulator: %s", reg_type);
pos = buf_append_str(buf, size, pos, "|Main regulator: ");
pos = buf_append_str(buf, size, pos, reg_type);
// Power-fail comparator, the threshold goes from 1.7V up in 0.1V steps
const uint32_t pofcon = NRF_REGULATORS->POFCON;
if ((pofcon & REGULATORS_POFCON_POF_Msk) == (REGULATORS_POFCON_POF_Enabled << REGULATORS_POFCON_POF_Pos)) {
const uint32_t decivolts = 17 + ((pofcon & REGULATORS_POFCON_THRESHOLD_Msk) >> REGULATORS_POFCON_THRESHOLD_Pos);
ESP_LOGD(TAG, "Power-fail comparator: %" PRIu32 ".%" PRIu32 "V", decivolts / 10, decivolts % 10);
pos = buf_append_printf(buf, size, pos, "|Power-fail comparator: %" PRIu32 ".%" PRIu32 "V", decivolts / 10,
decivolts % 10);
} else {
ESP_LOGD(TAG, "Power-fail comparator: disabled");
pos = buf_append_str(buf, size, pos, "|Power-fail comparator: disabled");
}
char mac_pretty[MAC_ADDRESS_PRETTY_BUFFER_SIZE];
get_mac_address_pretty_into_buffer(mac_pretty);
const uint32_t variant = NRF_FICR->INFO.VARIANT;
ESP_LOGD(TAG,
"nRF debug info:\n"
" Device id: 0x%08" PRIx32 "%08" PRIx32 "\n"
" Encryption root: 0x%08" PRIx32 "%08" PRIx32 "%08" PRIx32 "%08" PRIx32 ", Identity Root: 0x%08" PRIx32
"%08" PRIx32 "%08" PRIx32 "%08" PRIx32 "\n"
" Device address type: %s, address: %s\n"
" Part code: 0x%" PRIx32 ", version: %c%c%c%c, package: 0x%" PRIx32 "\n"
" RAM: %" PRIu32 "kB, RRAM: %" PRIu32 "kB",
NRF_FICR->INFO.DEVICEID[1], NRF_FICR->INFO.DEVICEID[0], NRF_FICR->ER[0], NRF_FICR->ER[1], NRF_FICR->ER[2],
NRF_FICR->ER[3], NRF_FICR->IR[0], NRF_FICR->IR[1], NRF_FICR->IR[2], NRF_FICR->IR[3],
(NRF_FICR->DEVICEADDRTYPE & 0x1 ? LOG_STR_LITERAL("Random") : LOG_STR_LITERAL("Public")), mac_pretty,
NRF_FICR->INFO.PART, static_cast<char>(variant >> 24 & 0xFF), static_cast<char>(variant >> 16 & 0xFF),
static_cast<char>(variant >> 8 & 0xFF), static_cast<char>(variant & 0xFF), NRF_FICR->INFO.PACKAGE,
NRF_FICR->INFO.RAM, NRF_FICR->INFO.RRAM);
#ifdef USE_BOOTLOADER_MCUBOOT
ESP_LOGD(TAG, " Bootloader: mcuboot");
#endif
#ifdef ESPHOME_LOG_HAS_VERBOSE
log_peripherals_info();
#endif
return pos;
}
// NOLINTEND(clang-analyzer-core.FixedAddressDereference)
#undef NRF_PERIPH_ENABLED
} // namespace esphome::debug
#endif
-364
View File
@@ -2,55 +2,14 @@
#ifdef USE_ZEPHYR
#include <cinttypes>
#include <climits>
#include "esphome/core/alloc_helpers.h"
#include "esphome/core/log.h"
#include <esphome/components/zephyr/reset_reason.h>
#include <zephyr/drivers/hwinfo.h>
#include <zephyr/kernel.h>
#include <hal/nrf_power.h>
#include <cstdint>
#include <zephyr/storage/flash_map.h>
#define BOOTLOADER_VERSION_REGISTER NRF_TIMER2->CC[0]
namespace esphome::debug {
ESPHOME_LOG_TAG(TAG, "debug");
constexpr std::uintptr_t MBR_PARAM_PAGE_ADDR = 0xFFC;
constexpr std::uintptr_t MBR_BOOTLOADER_ADDR = 0xFF8;
static inline uint32_t read_mem_u32(uintptr_t addr) {
// NOLINTNEXTLINE(performance-no-int-to-ptr,clang-analyzer-core.FixedAddressDereference)
return *reinterpret_cast<volatile uint32_t *>(addr);
}
static inline uint8_t read_mem_u8(uintptr_t addr) {
// NOLINTNEXTLINE(performance-no-int-to-ptr,clang-analyzer-core.FixedAddressDereference)
return *reinterpret_cast<volatile uint8_t *>(addr);
}
// defines from https://github.com/adafruit/Adafruit_nRF52_Bootloader which prints those information
constexpr uint32_t SD_MAGIC_NUMBER = 0x51B1E5DB;
constexpr uintptr_t MBR_SIZE = 0x1000;
constexpr uintptr_t SOFTDEVICE_INFO_STRUCT_OFFSET = 0x2000;
constexpr uintptr_t SD_ID_OFFSET = SOFTDEVICE_INFO_STRUCT_OFFSET + 0x10;
constexpr uintptr_t SD_VERSION_OFFSET = SOFTDEVICE_INFO_STRUCT_OFFSET + 0x14;
static inline bool is_sd_present() {
return read_mem_u32(SOFTDEVICE_INFO_STRUCT_OFFSET + MBR_SIZE + 4) == SD_MAGIC_NUMBER;
}
static inline uint32_t sd_id_get() {
if (read_mem_u8(MBR_SIZE + SOFTDEVICE_INFO_STRUCT_OFFSET) > (SD_ID_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) {
return read_mem_u32(MBR_SIZE + SD_ID_OFFSET);
}
return 0;
}
static inline uint32_t sd_version_get() {
if (read_mem_u8(MBR_SIZE + SOFTDEVICE_INFO_STRUCT_OFFSET) > (SD_VERSION_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) {
return read_mem_u32(MBR_SIZE + SD_VERSION_OFFSET);
}
return 0;
}
const char *DebugComponent::get_reset_reason_(std::span<char, RESET_REASON_BUFFER_SIZE> buffer) {
const char *buf = zephyr::get_reset_reason(buffer);
@@ -96,329 +55,6 @@ void DebugComponent::log_partition_info_() {
flash_area_foreach(fa_cb, nullptr);
}
#ifdef ESPHOME_LOG_HAS_VERBOSE
// Check if an nRF peripheral's ENABLE register indicates it is enabled.
// periph: peripheral register prefix (e.g. USBD, UARTE, SPI)
// reg: register block pointer (e.g. NRF_USBD, NRF_UARTE0)
#define NRF_PERIPH_ENABLED(periph, reg) \
YESNO(((reg)->ENABLE & periph##_ENABLE_ENABLE_Msk) == (periph##_ENABLE_ENABLE_Enabled << periph##_ENABLE_ENABLE_Pos))
// NOLINTBEGIN(clang-analyzer-core.FixedAddressDereference) -- nRF peripheral registers are MMIO at fixed addresses
static void log_peripherals_info() {
// most peripherals are enabled only when in use so ESP_LOGV is enough
ESP_LOGV(TAG, "Peripherals status:");
ESP_LOGV(TAG, " USBD: %-3s| UARTE0: %-3s| UARTE1: %-3s| UART0: %-3s", //
NRF_PERIPH_ENABLED(USBD, NRF_USBD), NRF_PERIPH_ENABLED(UARTE, NRF_UARTE0),
NRF_PERIPH_ENABLED(UARTE, NRF_UARTE1), NRF_PERIPH_ENABLED(UART, NRF_UART0));
ESP_LOGV(TAG, " TWIS0: %-3s| TWIS1: %-3s| TWIM0: %-3s| TWIM1: %-3s", //
NRF_PERIPH_ENABLED(TWIS, NRF_TWIS0), NRF_PERIPH_ENABLED(TWIS, NRF_TWIS1),
NRF_PERIPH_ENABLED(TWIM, NRF_TWIM0), NRF_PERIPH_ENABLED(TWIM, NRF_TWIM1));
ESP_LOGV(TAG, " TWI0: %-3s| TWI1: %-3s| COMP: %-3s| CCM: %-3s", //
NRF_PERIPH_ENABLED(TWI, NRF_TWI0), NRF_PERIPH_ENABLED(TWI, NRF_TWI1), NRF_PERIPH_ENABLED(COMP, NRF_COMP),
NRF_PERIPH_ENABLED(CCM, NRF_CCM));
ESP_LOGV(TAG, " PDM: %-3s| SPIS0: %-3s| SPIS1: %-3s| SPIS2: %-3s", //
NRF_PERIPH_ENABLED(PDM, NRF_PDM), NRF_PERIPH_ENABLED(SPIS, NRF_SPIS0), NRF_PERIPH_ENABLED(SPIS, NRF_SPIS1),
NRF_PERIPH_ENABLED(SPIS, NRF_SPIS2));
ESP_LOGV(TAG, " SPIM0: %-3s| SPIM1: %-3s| SPIM2: %-3s| SPIM3: %-3s", //
NRF_PERIPH_ENABLED(SPIM, NRF_SPIM0), NRF_PERIPH_ENABLED(SPIM, NRF_SPIM1),
NRF_PERIPH_ENABLED(SPIM, NRF_SPIM2), NRF_PERIPH_ENABLED(SPIM, NRF_SPIM3));
ESP_LOGV(TAG, " SPI0: %-3s| SPI1: %-3s| SPI2: %-3s| SAADC: %-3s", //
NRF_PERIPH_ENABLED(SPI, NRF_SPI0), NRF_PERIPH_ENABLED(SPI, NRF_SPI1), NRF_PERIPH_ENABLED(SPI, NRF_SPI2),
NRF_PERIPH_ENABLED(SAADC, NRF_SAADC));
ESP_LOGV(TAG, " QSPI: %-3s| QDEC: %-3s| LPCOMP: %-3s| I2S: %-3s", //
NRF_PERIPH_ENABLED(QSPI, NRF_QSPI), NRF_PERIPH_ENABLED(QDEC, NRF_QDEC),
NRF_PERIPH_ENABLED(LPCOMP, NRF_LPCOMP), NRF_PERIPH_ENABLED(I2S, NRF_I2S));
ESP_LOGV(TAG, " PWM0: %-3s| PWM1: %-3s| PWM2: %-3s| PWM3: %-3s", //
NRF_PERIPH_ENABLED(PWM, NRF_PWM0), NRF_PERIPH_ENABLED(PWM, NRF_PWM1), NRF_PERIPH_ENABLED(PWM, NRF_PWM2),
NRF_PERIPH_ENABLED(PWM, NRF_PWM3));
ESP_LOGV(TAG, " AAR: %-3s| QSPI deep power-down:%-3s| CRYPTOCELL: %-3s", NRF_PERIPH_ENABLED(AAR, NRF_AAR),
YESNO((NRF_QSPI->IFCONFIG0 & QSPI_IFCONFIG0_DPMENABLE_Msk) ==
(QSPI_IFCONFIG0_DPMENABLE_Enable << QSPI_IFCONFIG0_DPMENABLE_Pos)),
YESNO((NRF_CRYPTOCELL->ENABLE & CRYPTOCELL_ENABLE_ENABLE_Msk) ==
(CRYPTOCELL_ENABLE_ENABLE_Enabled << CRYPTOCELL_ENABLE_ENABLE_Pos)));
}
// NOLINTEND(clang-analyzer-core.FixedAddressDereference)
#undef NRF_PERIPH_ENABLED
#endif
static const char *regout0_to_str(uint32_t value) {
switch (value) {
case (UICR_REGOUT0_VOUT_DEFAULT):
return "1.8V (default)";
case (UICR_REGOUT0_VOUT_1V8):
return "1.8V";
case (UICR_REGOUT0_VOUT_2V1):
return "2.1V";
case (UICR_REGOUT0_VOUT_2V4):
return "2.4V";
case (UICR_REGOUT0_VOUT_2V7):
return "2.7V";
case (UICR_REGOUT0_VOUT_3V0):
return "3.0V";
case (UICR_REGOUT0_VOUT_3V3):
return "3.3V";
default:
break;
}
return "???V";
}
size_t DebugComponent::get_device_info_(std::span<char, DEVICE_INFO_BUFFER_SIZE> buffer, size_t pos) {
constexpr size_t size = DEVICE_INFO_BUFFER_SIZE;
char *buf = buffer.data();
// Main supply status
// NOLINTNEXTLINE(clang-analyzer-core.FixedAddressDereference) -- NRF_POWER is MMIO at a fixed address
auto regstatus = nrf_power_mainregstatus_get(NRF_POWER);
const char *supply_status = (regstatus == NRF_POWER_MAINREGSTATUS_NORMAL) ? "Normal voltage." : "High voltage.";
ESP_LOGD(TAG, "Main supply status: %s", supply_status);
pos = buf_append_str(buf, size, pos, "|Main supply status: ");
pos = buf_append_str(buf, size, pos, supply_status);
// Regulator stage 0
if (nrf_power_mainregstatus_get(NRF_POWER) == NRF_POWER_MAINREGSTATUS_HIGH) {
const char *reg0_type = nrf_power_dcdcen_vddh_get(NRF_POWER) ? "DC/DC" : "LDO";
const char *reg0_voltage = regout0_to_str((NRF_UICR->REGOUT0 & UICR_REGOUT0_VOUT_Msk) >> UICR_REGOUT0_VOUT_Pos);
ESP_LOGD(TAG, "Regulator stage 0: %s, %s", reg0_type, reg0_voltage);
pos = buf_append_str(buf, size, pos, "|Regulator stage 0: ");
pos = buf_append_str(buf, size, pos, reg0_type);
pos = buf_append_str(buf, size, pos, ", ");
pos = buf_append_str(buf, size, pos, reg0_voltage);
#ifdef USE_NRF52_REG0_VOUT
if ((NRF_UICR->REGOUT0 & UICR_REGOUT0_VOUT_Msk) >> UICR_REGOUT0_VOUT_Pos != USE_NRF52_REG0_VOUT) {
ESP_LOGE(TAG, "Regulator stage 0: expected %s", regout0_to_str(USE_NRF52_REG0_VOUT));
}
#endif
} else {
ESP_LOGD(TAG, "Regulator stage 0: disabled");
pos = buf_append_str(buf, size, pos, "|Regulator stage 0: disabled");
}
// Regulator stage 1
const char *reg1_type = nrf_power_dcdcen_get(NRF_POWER) ? "DC/DC" : "LDO";
ESP_LOGD(TAG, "Regulator stage 1: %s", reg1_type);
pos = buf_append_str(buf, size, pos, "|Regulator stage 1: ");
pos = buf_append_str(buf, size, pos, reg1_type);
// USB power state
const char *usb_state;
if (nrf_power_usbregstatus_vbusdet_get(NRF_POWER)) {
usb_state = nrf_power_usbregstatus_outrdy_get(NRF_POWER) ? "ready" : "connected (regulator is not ready)";
} else {
usb_state = "disconnected";
}
ESP_LOGD(TAG, "USB power state: %s", usb_state);
pos = buf_append_str(buf, size, pos, "|USB power state: ");
pos = buf_append_str(buf, size, pos, usb_state);
// Power-fail comparator
bool enabled;
nrf_power_pof_thr_t pof_thr = nrf_power_pofcon_get(NRF_POWER, &enabled);
if (enabled) {
const char *pof_voltage;
switch (pof_thr) {
case POWER_POFCON_THRESHOLD_V17:
pof_voltage = "1.7V";
break;
case POWER_POFCON_THRESHOLD_V18:
pof_voltage = "1.8V";
break;
case POWER_POFCON_THRESHOLD_V19:
pof_voltage = "1.9V";
break;
case POWER_POFCON_THRESHOLD_V20:
pof_voltage = "2.0V";
break;
case POWER_POFCON_THRESHOLD_V21:
pof_voltage = "2.1V";
break;
case POWER_POFCON_THRESHOLD_V22:
pof_voltage = "2.2V";
break;
case POWER_POFCON_THRESHOLD_V23:
pof_voltage = "2.3V";
break;
case POWER_POFCON_THRESHOLD_V24:
pof_voltage = "2.4V";
break;
case POWER_POFCON_THRESHOLD_V25:
pof_voltage = "2.5V";
break;
case POWER_POFCON_THRESHOLD_V26:
pof_voltage = "2.6V";
break;
case POWER_POFCON_THRESHOLD_V27:
pof_voltage = "2.7V";
break;
case POWER_POFCON_THRESHOLD_V28:
pof_voltage = "2.8V";
break;
default:
pof_voltage = "???V";
break;
}
if (nrf_power_mainregstatus_get(NRF_POWER) == NRF_POWER_MAINREGSTATUS_HIGH) {
const char *vddh_voltage;
switch (nrf_power_pofcon_vddh_get(NRF_POWER)) {
case NRF_POWER_POFTHRVDDH_V27:
vddh_voltage = "2.7V";
break;
case NRF_POWER_POFTHRVDDH_V28:
vddh_voltage = "2.8V";
break;
case NRF_POWER_POFTHRVDDH_V29:
vddh_voltage = "2.9V";
break;
case NRF_POWER_POFTHRVDDH_V30:
vddh_voltage = "3.0V";
break;
case NRF_POWER_POFTHRVDDH_V31:
vddh_voltage = "3.1V";
break;
case NRF_POWER_POFTHRVDDH_V32:
vddh_voltage = "3.2V";
break;
case NRF_POWER_POFTHRVDDH_V33:
vddh_voltage = "3.3V";
break;
case NRF_POWER_POFTHRVDDH_V34:
vddh_voltage = "3.4V";
break;
case NRF_POWER_POFTHRVDDH_V35:
vddh_voltage = "3.5V";
break;
case NRF_POWER_POFTHRVDDH_V36:
vddh_voltage = "3.6V";
break;
case NRF_POWER_POFTHRVDDH_V37:
vddh_voltage = "3.7V";
break;
case NRF_POWER_POFTHRVDDH_V38:
vddh_voltage = "3.8V";
break;
case NRF_POWER_POFTHRVDDH_V39:
vddh_voltage = "3.9V";
break;
case NRF_POWER_POFTHRVDDH_V40:
vddh_voltage = "4.0V";
break;
case NRF_POWER_POFTHRVDDH_V41:
vddh_voltage = "4.1V";
break;
case NRF_POWER_POFTHRVDDH_V42:
vddh_voltage = "4.2V";
break;
default:
vddh_voltage = "???V";
break;
}
ESP_LOGD(TAG, "Power-fail comparator: %s, VDDH: %s", pof_voltage, vddh_voltage);
pos = buf_append_str(buf, size, pos, "|Power-fail comparator: ");
pos = buf_append_str(buf, size, pos, pof_voltage);
pos = buf_append_str(buf, size, pos, ", VDDH: ");
pos = buf_append_str(buf, size, pos, vddh_voltage);
} else {
ESP_LOGD(TAG, "Power-fail comparator: %s", pof_voltage);
pos = buf_append_str(buf, size, pos, "|Power-fail comparator: ");
pos = buf_append_str(buf, size, pos, pof_voltage);
}
} else {
ESP_LOGD(TAG, "Power-fail comparator: disabled");
pos = buf_append_str(buf, size, pos, "|Power-fail comparator: disabled");
}
auto package = [](uint32_t value) {
switch (value) {
case 0x2004:
return "QIxx - 7x7 73-pin aQFN";
case 0x2000:
return "QFxx - 6x6 48-pin QFN";
case 0x2005:
return "CKxx - 3.544 x 3.607 WLCSP";
default:
break;
}
return "Unspecified";
};
char mac_pretty[MAC_ADDRESS_PRETTY_BUFFER_SIZE];
get_mac_address_pretty_into_buffer(mac_pretty);
ESP_LOGD(TAG,
"nRF debug info:\n"
" Code page size: %u, code size: %u, device id: 0x%08x%08x\n"
" Encryption root: 0x%08x%08x%08x%08x, Identity Root: 0x%08x%08x%08x%08x\n"
" Device address type: %s, address: %s\n"
" Part code: nRF%x, version: %c%c%c%c, package: %s\n"
" RAM: %ukB, Flash: %ukB, production test: %sdone",
NRF_FICR->CODEPAGESIZE, NRF_FICR->CODESIZE, NRF_FICR->DEVICEID[1], NRF_FICR->DEVICEID[0], NRF_FICR->ER[0],
NRF_FICR->ER[1], NRF_FICR->ER[2], NRF_FICR->ER[3], NRF_FICR->IR[0], NRF_FICR->IR[1], NRF_FICR->IR[2],
NRF_FICR->IR[3], (NRF_FICR->DEVICEADDRTYPE & 0x1 ? "Random" : "Public"), mac_pretty, NRF_FICR->INFO.PART,
NRF_FICR->INFO.VARIANT >> 24 & 0xFF, NRF_FICR->INFO.VARIANT >> 16 & 0xFF, NRF_FICR->INFO.VARIANT >> 8 & 0xFF,
NRF_FICR->INFO.VARIANT & 0xFF, package(NRF_FICR->INFO.PACKAGE), NRF_FICR->INFO.RAM, NRF_FICR->INFO.FLASH,
(NRF_FICR->PRODTEST[0] == 0xBB42319F ? "" : "not "));
bool n_reset_enabled = NRF_UICR->PSELRESET[0] == NRF_UICR->PSELRESET[1] &&
(NRF_UICR->PSELRESET[0] & UICR_PSELRESET_CONNECT_Msk) == UICR_PSELRESET_CONNECT_Connected
<< UICR_PSELRESET_CONNECT_Pos;
ESP_LOGD(
TAG, " GPIO as NFC pins: %s, GPIO as nRESET pin: %s",
YESNO((NRF_UICR->NFCPINS & UICR_NFCPINS_PROTECT_Msk) == (UICR_NFCPINS_PROTECT_NFC << UICR_NFCPINS_PROTECT_Pos)),
YESNO(n_reset_enabled));
if (n_reset_enabled) {
uint8_t port = (NRF_UICR->PSELRESET[0] & UICR_PSELRESET_PORT_Msk) >> UICR_PSELRESET_PORT_Pos;
uint8_t pin = (NRF_UICR->PSELRESET[0] & UICR_PSELRESET_PIN_Msk) >> UICR_PSELRESET_PIN_Pos;
ESP_LOGD(TAG, " nRESET port P%u.%02u", port, pin);
}
#ifdef USE_BOOTLOADER_MCUBOOT
ESP_LOGD(TAG, " Bootloader: mcuboot");
#else
ESP_LOGD(TAG, " Bootloader: Adafruit, version %u.%u.%u", (BOOTLOADER_VERSION_REGISTER >> 16) & 0xFF,
(BOOTLOADER_VERSION_REGISTER >> 8) & 0xFF, BOOTLOADER_VERSION_REGISTER & 0xFF);
ESP_LOGD(TAG, " MBR bootloader addr 0x%08x, UICR bootloader addr 0x%08x", read_mem_u32(MBR_BOOTLOADER_ADDR),
NRF_UICR->NRFFW[0]);
ESP_LOGD(TAG, " MBR param page addr 0x%08x, UICR param page addr 0x%08x", read_mem_u32(MBR_PARAM_PAGE_ADDR),
NRF_UICR->NRFFW[1]);
if (is_sd_present()) {
uint32_t const sd_id = sd_id_get();
uint32_t const sd_version = sd_version_get();
uint32_t ver[3];
ver[0] = sd_version / 1000000;
ver[1] = (sd_version - ver[0] * 1000000) / 1000;
ver[2] = (sd_version - ver[0] * 1000000 - ver[1] * 1000);
ESP_LOGD(TAG, " SoftDevice: S%u %u.%u.%u", sd_id, ver[0], ver[1], ver[2]);
#ifdef USE_SOFTDEVICE_ID
#ifdef USE_SOFTDEVICE_VERSION
if (USE_SOFTDEVICE_ID != sd_id || USE_SOFTDEVICE_VERSION != ver[0]) {
ESP_LOGE(TAG, "Built for SoftDevice S%u %u.x.y. It may crash due to mismatch of bootloader version.",
USE_SOFTDEVICE_ID, USE_SOFTDEVICE_VERSION);
}
#else
if (USE_SOFTDEVICE_ID != sd_id) {
ESP_LOGE(TAG, "Built for SoftDevice S%u. It may crash due to mismatch of bootloader version.", USE_SOFTDEVICE_ID);
}
#endif
#endif
}
#endif
// 13 words of 8 hex digits, separated by spaces
char uicr_buf[13 * 9];
auto uicr = [&uicr_buf](volatile uint32_t *data, uint8_t size) {
size_t len = 0;
for (size_t i = 0; i < size; i++) {
len = buf_append_printf(uicr_buf, sizeof(uicr_buf), len, i > 0 ? " %08" PRIX32 : "%08" PRIX32, data[i]);
}
return uicr_buf;
};
ESP_LOGD(TAG, " NRFFW %s", uicr(NRF_UICR->NRFFW, 13));
ESP_LOGD(TAG, " NRFHW %s", uicr(NRF_UICR->NRFHW, 12));
#ifdef ESPHOME_LOG_HAS_VERBOSE
log_peripherals_info();
#endif
return pos;
}
// The Python side enables the statistics only for a verbose logger
#ifdef CONFIG_SCHED_THREAD_USAGE_ANALYSIS
static void log_thread_usage(const struct k_thread *thread, void *user_data) {
+15 -26
View File
@@ -94,7 +94,6 @@ UART_SELECTION_RP2040 = [USB_CDC, UART0, UART1]
UART_SELECTION_NRF52 = [USB_CDC, UART0]
# Read by device-builder
HARDWARE_UART_TO_UART_SELECTION = {
UART0: logger_ns.UART_SELECTION_UART0,
UART0_SWAP: logger_ns.UART_SELECTION_UART0_SWAP,
@@ -539,17 +538,17 @@ async def to_code(config: ConfigType) -> None:
cg.add(log.set_boot_log_level(tag, LOG_LEVELS[log_level]))
if CORE.is_esp32 or CORE.is_host:
cg.add(log.create_pthread_key())
if (hardware_uart := config.get(CONF_HARDWARE_UART)) is not None:
cg.add_define(f"USE_LOGGER_UART_SELECTION_{hardware_uart}")
cg.add_define(
"ESPHOME_LOGGER_UART_SELECTION",
cg.RawExpression(f"logger::UART_SELECTION_{hardware_uart}"),
)
# ESP8266 without serial logging never opens a port
cg.add_define(
"ESPHOME_LOGGER_UART_NAME",
"NONE" if CORE.is_esp8266 and baud_rate == 0 else hardware_uart,
)
# set_uart_selection() must be called before pre_setup() because
# pre_setup() switches on uart_ to decide which hardware to initialize
# (e.g. UART0 vs USB_SERIAL_JTAG). Without this, uart_ is still the
# default UART_SELECTION_UART0 and the wrong hardware gets initialized.
# uart_ is UART0 in C++ except on LibreTiny where it is DEFAULT; skip the
# setter when the config matches it.
cpp_default_uart = DEFAULT if CORE.is_libretiny else UART0
if (
hardware_uart := config.get(CONF_HARDWARE_UART)
) is not None and hardware_uart != cpp_default_uart:
cg.add(log.set_uart_selection(HARDWARE_UART_TO_UART_SELECTION[hardware_uart]))
# pre_setup() sets global_logger and must run before any other code
# that may call ESP_LOG* (e.g. setup_preferences contains ESP_LOGVV).
cg.add(log.pre_setup())
@@ -646,6 +645,7 @@ async def _late_logger_init(config: ConfigType) -> None:
add_idf_sdkconfig_option("CONFIG_ESP_CONSOLE_USB_CDC", True)
elif config[CONF_HARDWARE_UART] == USB_SERIAL_JTAG:
add_idf_sdkconfig_option("CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG", True)
cg.add_define("USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG")
# Log V2 formats centrally in esp_log() (~4KB flash, ~180B RAM). 6.1
# adds CONSTRAINED_ENV_SAFE=n, keeping early/DRAM logs on
# esp_rom_printf instead of pulling ~1.2KB esp_rom_vprintf into IRAM.
@@ -663,12 +663,10 @@ async def _late_logger_init(config: ConfigType) -> None:
# --wrap: a strong definition collides; see logger_esp32.cpp
cg.add_build_flag("-Wl,--wrap=esp_log_format")
# Zephyr polls the USB port only when it logs there
if (
CORE.using_zephyr
and has_serial_logging
and config[CONF_HARDWARE_UART] == USB_CDC
if config.get(CONF_HARDWARE_UART) == USB_CDC and (
has_serial_logging or not CORE.is_nrf52
):
cg.add_define("USE_LOGGER_ZEPHYR_CDC_LOOP")
cg.add_define("USE_LOGGER_UART_SELECTION_USB_CDC")
# Define platform support flags for components that need auto-detection
try:
uart_selection(USB_SERIAL_JTAG)
@@ -886,15 +884,6 @@ def request_logger_level_listeners() -> None:
_request_log_listener_slot = cg.slot_counter("ESPHOME_LOG_MAX_LISTENERS")
def request_console() -> None:
"""Compile in Logger::console_read() and console_write(); call from to_code.
On ESP32 a USB_CDC logger only has a console where ESP-IDF sets CONFIG_ESP_CONSOLE_USB_CDC (targets with
USB OTG); elsewhere, such as the C3, C6 or H2, both do nothing. Host and Zephyr have no console API.
"""
cg.add_define("USE_LOGGER_CONSOLE")
def request_log_listener() -> None:
"""Reserve a log listener slot; call once per listener from to_code."""
cg.add_define("USE_LOG_LISTENERS")
+3 -22
View File
@@ -248,10 +248,10 @@ Logger::Logger(uint32_t baud_rate) : baud_rate_(baud_rate) {
#endif
}
#if defined(USE_ESPHOME_TASK_LOG_BUFFER) || defined(USE_LOGGER_ZEPHYR_CDC_LOOP)
#if defined(USE_ESPHOME_TASK_LOG_BUFFER) || (defined(USE_ZEPHYR) && defined(USE_LOGGER_UART_SELECTION_USB_CDC))
void Logger::loop() {
this->process_messages_();
#ifdef USE_LOGGER_ZEPHYR_CDC_LOOP
#if defined(USE_ZEPHYR) && defined(USE_LOGGER_UART_SELECTION_USB_CDC)
this->cdc_loop_();
#endif
}
@@ -278,7 +278,7 @@ void Logger::process_messages_() {
}
}
// Zephyr with USB CDC keeps the loop running for cdc_loop_()
#ifndef USE_LOGGER_ZEPHYR_CDC_LOOP
#if !(defined(USE_ZEPHYR) && defined(USE_LOGGER_UART_SELECTION_USB_CDC))
else {
// A concurrent enable_loop_soon_any_context() still wakes the next iteration
this->disable_loop();
@@ -371,25 +371,6 @@ static const LogString *get_log_level_str(uint8_t level) {
return LogLevelStrings::get_log_str(level, LogLevelStrings::LAST_INDEX);
}
#ifndef USE_HOST
const LogString *Logger::get_uart_selection_() {
#ifdef USE_LOGGER_UART_SELECTION_DEFAULT
// LibreTiny resolves DEFAULT to the board's port only when serial logging is on
if (this->baud_rate_ > 0) {
switch (this->get_uart()) {
case UART_SELECTION_UART0:
return LOG_STR("UART0");
case UART_SELECTION_UART1:
return LOG_STR("UART1");
default:
return LOG_STR("UART2");
}
}
#endif
return LOG_STR(ESPHOME_LOGGER_UART_NAME);
}
#endif
void Logger::dump_config() {
ESP_LOGCONFIG(TAG,
"Logger:\n"
+10 -35
View File
@@ -124,9 +124,6 @@ enum UARTSelection : uint8_t {
UART_SELECTION_UART0_SWAP,
#endif // USE_ESP8266
};
// The port chosen by hardware_uart, fixed at build time
static constexpr UARTSelection CONFIGURED_UART_SELECTION = ESPHOME_LOGGER_UART_SELECTION;
#endif // USE_ESP32 || USE_ESP8266 || USE_RP2 || USE_LIBRETINY || USE_ZEPHYR
/**
@@ -149,7 +146,7 @@ static constexpr UARTSelection CONFIGURED_UART_SELECTION = ESPHOME_LOGGER_UART_S
class Logger final : public Component {
public:
explicit Logger(uint32_t baud_rate);
#if defined(USE_ESPHOME_TASK_LOG_BUFFER) || defined(USE_LOGGER_ZEPHYR_CDC_LOOP)
#if defined(USE_ESPHOME_TASK_LOG_BUFFER) || (defined(USE_ZEPHYR) && defined(USE_LOGGER_UART_SELECTION_USB_CDC))
void loop() override;
#endif
#if defined(USE_RP2_CRASH_HANDLER) && defined(USE_LOGGER_UART_SELECTION_USB_CDC)
@@ -163,11 +160,11 @@ class Logger final : public Component {
#endif
#ifdef USE_ESP32
/// UART_NUM_0 when logging to USB
constexpr uart_port_t get_uart_num() const {
uart_port_t get_uart_num() const {
#if defined(USE_LOGGER_UART_SELECTION_USB_CDC) || defined(USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG)
return UART_NUM_0;
#else
return static_cast<uart_port_t>(CONFIGURED_UART_SELECTION);
return static_cast<uart_port_t>(this->uart_);
#endif
}
#endif
@@ -175,35 +172,9 @@ class Logger final : public Component {
void create_pthread_key() { pthread_key_create(&this->log_recursion_key_, nullptr); }
#endif
#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2) || defined(USE_LIBRETINY) || defined(USE_ZEPHYR)
void set_uart_selection(UARTSelection uart_selection) { this->uart_ = uart_selection; }
/// Get the UART used by the logger.
#ifdef USE_LIBRETINY
// DEFAULT resolves to the board's default port
constexpr UARTSelection get_uart() const {
return CONFIGURED_UART_SELECTION == UART_SELECTION_DEFAULT ? static_cast<UARTSelection>(LT_UART_DEFAULT_SERIAL + 1)
: CONFIGURED_UART_SELECTION;
}
#else
constexpr UARTSelection get_uart() const { return CONFIGURED_UART_SELECTION; }
#endif
#endif
#ifdef USE_LOGGER_CONSOLE
// Raw bytes on the console port, without log framing; request with logger.request_console()
// console_write() returns the bytes written: a UART write blocks until all are queued, but a USB write can stop
// short when the host is not reading (USB Serial/JTAG gives up after 20 ms)
#if defined(USE_ARDUINO) && !defined(USE_ESP32)
size_t console_write(const uint8_t *data, size_t len) { return this->hw_serial_->write(data, len); }
bool console_read(uint8_t &byte) {
int c = this->hw_serial_->read();
if (c < 0)
return false;
byte = c;
return true;
}
#elif defined(USE_ESP32)
size_t console_write(const uint8_t *data, size_t len);
/// Non-blocking read of one byte; false if none is waiting.
bool console_read(uint8_t &byte);
#endif
UARTSelection get_uart() const { return this->uart_; }
#endif
/// Set the default log level for this logger.
@@ -280,7 +251,7 @@ class Logger final : public Component {
void log_vprintf_non_main_thread_(uint8_t level, const char *tag, int line, const char *format, va_list args,
const char *thread_name);
#endif
#ifdef USE_LOGGER_ZEPHYR_CDC_LOOP
#if defined(USE_ZEPHYR) && defined(USE_LOGGER_UART_SELECTION_USB_CDC)
void cdc_loop_();
#endif
void process_messages_();
@@ -440,6 +411,10 @@ class Logger final : public Component {
bool boot_log_done_{false}; // Set on first replay; stops further capture
#endif
uint8_t current_level_{ESPHOME_LOG_LEVEL_VERY_VERBOSE};
#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2) || defined(USE_LIBRETINY) || defined(USE_ZEPHYR)
// 0 is UART0, or DEFAULT on LibreTiny; must match cpp_default_uart in __init__.py
UARTSelection uart_{};
#endif
bool main_task_recursion_guard_{false}; // Guards tx_buffer_ on the main loop
#ifdef USE_LIBRETINY
bool non_main_task_recursion_guard_{false}; // Shared guard for all non-main tasks on LibreTiny
+38 -36
View File
@@ -17,10 +17,6 @@
#include <driver/usb_serial_jtag_vfs.h>
#endif
#endif
// The logger accepts USB_CDC on targets without USB OTG (C3, C6, H2, ...), where IDF has no CDC console
#if defined(USE_LOGGER_CONSOLE) && defined(USE_LOGGER_UART_SELECTION_USB_CDC) && defined(CONFIG_ESP_CONSOLE_USB_CDC)
#include <esp_private/usb_console.h>
#endif
#if defined(CONFIG_PM_ENABLE) && defined(CONFIG_FREERTOS_USE_TICKLESS_IDLE) && \
(ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(6, 0, 0))
#include "esp_sleep.h"
@@ -77,7 +73,6 @@ static void init_usb_serial_jtag() {
}
#endif
#if !defined(USE_LOGGER_UART_SELECTION_USB_CDC) && !defined(USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG)
static void init_uart(uart_port_t uart_num, uint32_t baud_rate, int tx_buffer_size) {
uart_config_t uart_config{};
uart_config.baud_rate = (int) baud_rate;
@@ -102,7 +97,6 @@ static void init_uart(uart_port_t uart_num, uint32_t baud_rate, int tx_buffer_si
esp_sleep_set_console_uart_handling_mode(ESP_SLEEP_ALWAYS_FLUSH_UART);
#endif
}
#endif
// get_uart_num() and pre_setup() cast the selection straight to a port
static_assert(static_cast<int>(UART_SELECTION_UART0) == static_cast<int>(UART_NUM_0) &&
@@ -113,11 +107,26 @@ static_assert(static_cast<int>(UART_SELECTION_UART2) == static_cast<int>(UART_NU
void Logger::pre_setup() {
if (this->baud_rate_ > 0) {
#ifdef USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG
init_usb_serial_jtag();
#elif !defined(USE_LOGGER_UART_SELECTION_USB_CDC)
init_uart(this->get_uart_num(), this->baud_rate_, ESPHOME_LOGGER_TX_BUFFER_SIZE);
switch (this->uart_) {
case UART_SELECTION_UART0:
case UART_SELECTION_UART1:
#ifdef USE_ESP32_VARIANT_ESP32
case UART_SELECTION_UART2:
#endif
init_uart(static_cast<uart_port_t>(this->uart_), this->baud_rate_, ESPHOME_LOGGER_TX_BUFFER_SIZE);
break;
#ifdef USE_LOGGER_USB_CDC
case UART_SELECTION_USB_CDC:
break;
#endif
#ifdef USE_LOGGER_USB_SERIAL_JTAG
case UART_SELECTION_USB_SERIAL_JTAG:
#ifdef USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG
init_usb_serial_jtag();
#endif
break;
#endif
}
}
global_logger = this;
@@ -129,36 +138,29 @@ void Logger::pre_setup() {
#endif
}
#ifdef USE_LOGGER_CONSOLE
size_t Logger::console_write(const uint8_t *data, size_t len) {
int written = 0;
#if defined(USE_LOGGER_UART_SELECTION_USB_CDC)
#ifdef CONFIG_ESP_CONSOLE_USB_CDC // keep: not set without USB OTG, see the include above
written = esp_usb_console_write_buf(reinterpret_cast<const char *>(data), len);
const LogString *Logger::get_uart_selection_() {
switch (this->uart_) {
case UART_SELECTION_UART0:
return LOG_STR("UART0");
case UART_SELECTION_UART1:
return LOG_STR("UART1");
#ifdef USE_ESP32_VARIANT_ESP32
case UART_SELECTION_UART2:
return LOG_STR("UART2");
#endif
#elif defined(USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG)
written = usb_serial_jtag_write_bytes(data, len, pdMS_TO_TICKS(20));
#else
written = uart_write_bytes(this->get_uart_num(), data, len);
#ifdef USE_LOGGER_USB_CDC
case UART_SELECTION_USB_CDC:
return LOG_STR("USB_CDC");
#endif
return written > 0 ? written : 0;
#ifdef USE_LOGGER_USB_SERIAL_JTAG
case UART_SELECTION_USB_SERIAL_JTAG:
return LOG_STR("USB_SERIAL_JTAG");
#endif
default:
return LOG_STR("UNKNOWN");
}
}
bool Logger::console_read(uint8_t &byte) {
#if defined(USE_LOGGER_UART_SELECTION_USB_CDC)
#ifdef CONFIG_ESP_CONSOLE_USB_CDC // keep: not set without USB OTG, see the include above
return esp_usb_console_available_for_read() && esp_usb_console_read_buf(reinterpret_cast<char *>(&byte), 1) == 1;
#else
return false;
#endif
#elif defined(USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG)
return usb_serial_jtag_read_bytes(&byte, 1, 0) > 0;
#else
return uart_read_bytes(this->get_uart_num(), &byte, 1, 0) > 0;
#endif
}
#endif
#ifdef USE_CRASH_HANDLER
bool crash_log_pending() { return esp32::crash_handler_has_data(); }
void log_crash_to_client() {
+16 -3
View File
@@ -14,9 +14,9 @@ void Logger::pre_setup() {
#if defined(USE_ESP8266_LOGGER_SERIAL)
this->hw_serial_ = &Serial;
Serial.begin(this->baud_rate_);
#ifdef USE_LOGGER_UART_SELECTION_UART0_SWAP
Serial.swap();
#endif
if (this->uart_ == UART_SELECTION_UART0_SWAP) {
Serial.swap();
}
Serial.setDebugOutput(ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_VERBOSE);
#elif defined(USE_ESP8266_LOGGER_SERIAL1)
this->hw_serial_ = &Serial1;
@@ -35,6 +35,19 @@ void Logger::pre_setup() {
#endif
}
const LogString *Logger::get_uart_selection_() {
#if defined(USE_ESP8266_LOGGER_SERIAL)
if (this->uart_ == UART_SELECTION_UART0_SWAP) {
return LOG_STR("UART0_SWAP");
}
return LOG_STR("UART0");
#elif defined(USE_ESP8266_LOGGER_SERIAL1)
return LOG_STR("UART1");
#else
return LOG_STR("NONE");
#endif
}
#ifdef USE_CRASH_HANDLER
bool crash_log_pending() { return esp8266::crash_handler_has_data(); }
void log_crash_to_client() { esp8266::crash_handler_log(); }
+1 -1
View File
@@ -9,7 +9,7 @@ void HOT Logger::write_msg_(const char *msg, uint16_t len) {
char buffer[TIMESTAMP_LEN + ESPHOME_LOGGER_TX_BUFFER_SIZE + HEADROOM];
time_t rawtime;
time(&rawtime);
::time(&rawtime);
struct tm timeinfo;
localtime_r(&rawtime, &timeinfo); // Thread-safe version
size_t pos = strftime(buffer, TIMESTAMP_LEN + 1, "[%H:%M:%S]", &timeinfo);
+51 -20
View File
@@ -12,28 +12,45 @@ ESPHOME_LOG_TAG(TAG, "logger");
void Logger::pre_setup() {
if (this->baud_rate_ > 0) {
#if defined(USE_LOGGER_UART_SELECTION_UART0) && LT_HW_UART0
this->hw_serial_ = &Serial0;
libretiny::ensure_serial_handle(0);
Serial0.begin(this->baud_rate_);
#elif defined(USE_LOGGER_UART_SELECTION_UART1) && LT_HW_UART1
this->hw_serial_ = &Serial1;
libretiny::ensure_serial_handle(1);
Serial1.begin(this->baud_rate_);
#elif defined(USE_LOGGER_UART_SELECTION_UART2) && LT_HW_UART2
this->hw_serial_ = &Serial2;
libretiny::ensure_serial_handle(2);
Serial2.begin(this->baud_rate_);
#else
this->hw_serial_ = &Serial;
Serial.begin(this->baud_rate_);
if (CONFIGURED_UART_SELECTION != UART_SELECTION_DEFAULT) {
ESP_LOGW(TAG, " The chosen logger UART port is not available on this board."
"The default port was used instead.");
}
switch (this->uart_) {
#if LT_HW_UART0
case UART_SELECTION_UART0:
this->hw_serial_ = &Serial0;
libretiny::ensure_serial_handle(0);
Serial0.begin(this->baud_rate_);
break;
#endif
#if LT_HW_UART1
case UART_SELECTION_UART1:
this->hw_serial_ = &Serial1;
libretiny::ensure_serial_handle(1);
Serial1.begin(this->baud_rate_);
break;
#endif
#if LT_HW_UART2
case UART_SELECTION_UART2:
this->hw_serial_ = &Serial2;
libretiny::ensure_serial_handle(2);
Serial2.begin(this->baud_rate_);
break;
#endif
default:
this->hw_serial_ = &Serial;
Serial.begin(this->baud_rate_);
if (this->uart_ != UART_SELECTION_DEFAULT) {
ESP_LOGW(TAG, " The chosen logger UART port is not available on this board."
"The default port was used instead.");
}
break;
}
// change lt_log() port to match default Serial
lt_log_set_port(this->get_uart() - 1);
if (this->uart_ == UART_SELECTION_DEFAULT) {
this->uart_ = (UARTSelection) (LT_UART_DEFAULT_SERIAL + 1);
lt_log_set_port(LT_UART_DEFAULT_SERIAL);
} else {
lt_log_set_port(this->uart_ - 1);
}
}
global_logger = this;
@@ -43,6 +60,20 @@ void Logger::pre_setup() {
#endif
}
const LogString *Logger::get_uart_selection_() {
switch (this->uart_) {
case UART_SELECTION_DEFAULT:
return LOG_STR("DEFAULT");
case UART_SELECTION_UART0:
return LOG_STR("UART0");
case UART_SELECTION_UART1:
return LOG_STR("UART1");
case UART_SELECTION_UART2:
default:
return LOG_STR("UART2");
}
}
#ifdef USE_LIBRETINY_CRASH_HANDLER
bool crash_log_pending() { return libretiny::crash_handler_has_data(); }
void log_crash_to_client() { libretiny::crash_handler_log(); }
+27 -10
View File
@@ -26,16 +26,20 @@ void Logger::setup() {
void Logger::pre_setup() {
if (this->baud_rate_ > 0) {
#if defined(USE_LOGGER_UART_SELECTION_USB_CDC)
this->hw_serial_ = &Serial;
Serial.begin(this->baud_rate_);
#elif defined(USE_LOGGER_UART_SELECTION_UART1)
this->hw_serial_ = &Serial2;
Serial2.begin(this->baud_rate_);
#else
this->hw_serial_ = &Serial1;
Serial1.begin(this->baud_rate_);
#endif
switch (this->uart_) {
case UART_SELECTION_UART0:
this->hw_serial_ = &Serial1;
Serial1.begin(this->baud_rate_);
break;
case UART_SELECTION_UART1:
this->hw_serial_ = &Serial2;
Serial2.begin(this->baud_rate_);
break;
case UART_SELECTION_USB_CDC:
this->hw_serial_ = &Serial;
Serial.begin(this->baud_rate_);
break;
}
}
global_logger = this;
ESP_LOGI(TAG, "Log initialized");
@@ -45,6 +49,19 @@ void Logger::pre_setup() {
#endif
}
const LogString *Logger::get_uart_selection_() {
switch (this->uart_) {
case UART_SELECTION_UART0:
return LOG_STR("UART0");
case UART_SELECTION_UART1:
return LOG_STR("UART1");
case UART_SELECTION_USB_CDC:
return LOG_STR("USB_CDC");
default:
return LOG_STR("UNKNOWN");
}
}
#ifdef USE_CRASH_HANDLER
bool crash_log_pending() { return rp2::crash_handler_has_data(); }
void log_crash_to_client() { rp2::crash_handler_log(); }
+34 -13
View File
@@ -42,7 +42,7 @@ __attribute__((section(".noinit"))) struct {
ESPHOME_LOG_TAG(TAG, "logger");
#ifdef USE_LOGGER_ZEPHYR_CDC_LOOP
#ifdef USE_LOGGER_UART_SELECTION_USB_CDC
void Logger::cdc_loop_() {
if (this->uart_dev_ == nullptr) {
return;
@@ -75,19 +75,25 @@ void Logger::pre_setup() {
#ifdef CONFIG_SERIAL
if (this->baud_rate_ > 0) {
const struct device *uart_dev = nullptr;
#if defined(USE_LOGGER_UART_SELECTION_USB_CDC)
switch (this->uart_) {
case UART_SELECTION_UART0: // NOLINT(bugprone-branch-clone)
uart_dev = DEVICE_DT_GET_OR_NULL(DT_NODELABEL(ESPHOME_LOGGER_UART0_NODE));
break;
case UART_SELECTION_UART1:
uart_dev = DEVICE_DT_GET_OR_NULL(DT_NODELABEL(uart1));
break;
#ifdef USE_LOGGER_USB_CDC
case UART_SELECTION_USB_CDC:
#if defined(CONFIG_USB_DEVICE_STACK) || defined(CONFIG_USB_DEVICE_STACK_NEXT)
uart_dev = DEVICE_DT_GET_OR_NULL(DT_NODELABEL(cdc_acm_uart0));
if (device_is_ready(uart_dev)) {
// Nothing can log this early, and the logger has no output without USB anyway
zephyr::usb_device_enable();
uart_dev = DEVICE_DT_GET_OR_NULL(DT_NODELABEL(cdc_acm_uart0));
if (device_is_ready(uart_dev)) {
// Nothing can log this early, and the logger has no output without USB anyway
zephyr::usb_device_enable();
}
#endif
break;
#endif
}
#endif
#elif defined(USE_LOGGER_UART_SELECTION_UART1)
uart_dev = DEVICE_DT_GET_OR_NULL(DT_NODELABEL(uart1));
#else
uart_dev = DEVICE_DT_GET_OR_NULL(DT_NODELABEL(ESPHOME_LOGGER_UART0_NODE));
#endif
if (device_is_ready(uart_dev)) {
this->uart_dev_ = uart_dev;
#if defined(USE_LOGGER_WAIT_FOR_CDC) && defined(USE_LOGGER_UART_SELECTION_USB_CDC)
@@ -111,7 +117,7 @@ void Logger::pre_setup() {
this->dump_crash_();
#endif
// Nobody reads a USB port this early; cdc_loop_() reports the dump once the port is opened
#if defined(USE_CRASH_HANDLER) && !defined(USE_LOGGER_ZEPHYR_CDC_LOOP)
#if defined(USE_CRASH_HANDLER) && !defined(USE_LOGGER_UART_SELECTION_USB_CDC)
// Without a UART (baud_rate: 0, or one that did not come up) nothing reaches the console
if (this->uart_dev_ != nullptr)
log_crash_to_client();
@@ -133,6 +139,21 @@ void HOT Logger::write_msg_(const char *msg, uint16_t len) {
}
}
const LogString *Logger::get_uart_selection_() {
switch (this->uart_) {
case UART_SELECTION_UART0:
return LOG_STR("UART0");
case UART_SELECTION_UART1:
return LOG_STR("UART1");
#ifdef USE_LOGGER_USB_CDC
case UART_SELECTION_USB_CDC:
return LOG_STR("USB_CDC");
#endif
default:
return LOG_STR("UNKNOWN");
}
}
static constexpr uint8_t REASON_BUF_SIZE = 32;
static const char *reason_to_str(unsigned int reason, char *buf) {
+12 -3
View File
@@ -323,12 +323,17 @@ bool MQTTClientComponent::can_proceed() {
}
void MQTTClientComponent::start_dnslookup_() {
this->status_set_warning();
// No lookup can start before the network is up: there is no DNS server to ask yet.
// Stay disconnected, and loop() calls this again.
if (!network::is_connected())
return;
for (auto &subscription : this->subscriptions_) {
subscription.subscribed = false;
subscription.resubscribe_timeout = 0;
}
this->status_set_warning();
this->dns_resolve_error_ = false;
this->dns_resolved_ = false;
ip_addr_t addr;
@@ -358,9 +363,13 @@ void MQTTClientComponent::start_dnslookup_() {
}
default:
case ERR_ARG: {
// error
// The lookup never started, so there is no answer to wait for; loop() tries again in 5 seconds
ESP_LOGW(TAG, "Error resolving broker IP address: %d", err);
break;
this->state_ = MQTT_CLIENT_DISCONNECTED;
this->disconnect_reason_ = MQTTClientDisconnectReason::DNS_RESOLVE_ERROR;
this->on_disconnect_.call(MQTTClientDisconnectReason::DNS_RESOLVE_ERROR);
this->connect_begin_ = millis();
return;
}
}
+117 -39
View File
@@ -1,4 +1,5 @@
from collections.abc import Callable
import logging
from esphome import automation
import esphome.codegen as cg
@@ -8,6 +9,8 @@ import esphome.config_validation as cv
from esphome.const import CONF_DURATION, CONF_ID, CONF_MODE, CONF_VOLTAGE
from esphome.types import ConfigType
_LOGGER = logging.getLogger(__name__)
CODEOWNERS = ["@tomaszduda23"]
DEPENDENCIES = ["i2c"]
DOMAIN = "npm1300"
@@ -42,20 +45,18 @@ NPM1300_CHILD_SCHEMA = cv.Schema(
{cv.GenerateID(CONF_NPM1300_ID): cv.use_id(NPM1300Component)}
)
# Status registers read on each update: VBUSINSTATUS, BCHGCHARGESTATUS and BCHGERRREASON
NPM1300Status = npm1300_ns.struct("NPM1300Status")
# The status registers read on each update
STATUS_PUBLISHER = cg.HubFunction(
"status",
cg.void,
[
(cg.uint8, "vbus_status"),
(cg.uint8, "charge_status"),
(cg.uint8, "error_reason"),
],
[(NPM1300Status.operator("const").operator("ref"), "status")],
define="USE_NPM1300_STATUS_PUBLISHER",
)
VBUS_STATUS = STATUS_PUBLISHER.param("vbus_status")
CHARGE_STATUS = STATUS_PUBLISHER.param("charge_status")
ERROR_REASON = STATUS_PUBLISHER.param("error_reason")
STATUS = STATUS_PUBLISHER.param("status")
VBUS_STATUS = STATUS.vbus
CHARGE_STATUS = STATUS.charge
ERROR_REASON = STATUS.error_reason
# The ADC results and the amperes per code of the battery current
DATA_PUBLISHER = cg.HubFunction(
"data",
@@ -77,7 +78,10 @@ OUTPUTS = NPM1300Output.options(
# Written for a field the YAML leaves out
NPM1300_UNSET = 0xFF
# ADCNTCRSEL codes, by kiloohms
THERMISTOR_NONE = "none"
THERMISTOR_RESISTANCES = {10: 1, 47: 2, 100: 3}
# B25/50 of the thermistors the product specification lists for each resistance, by kiloohms
THERMISTOR_BETAS = {10: 3380, 47: 4050, 100: 4250}
LDO_MODES = {"load_switch": 0, "ldo": 1}
TERMINATION_CURRENTS = {"10%": 0, "20%": 1}
# BCHGVTRICKLESEL, by millivolts
@@ -101,14 +105,13 @@ def _one_of_units(
validator: Callable[[object], float],
allowed: list[int],
unit: str,
scale: float = 1000,
) -> Callable[[object], float]:
"""Validate a quantity with `validator` and accept only the listed values, given in units * `scale`."""
"""Validate a quantity with `validator` and accept only the listed values, given in thousandths of `unit`."""
def validate(value: object) -> float:
value = validator(value)
if round(value * scale) not in allowed:
options = ", ".join(f"{v / scale:g}{unit}" for v in allowed)
if _millis(value) not in allowed:
options = ", ".join(f"{v / 1000:g}{unit}" for v in allowed)
raise cv.Invalid(f"Must be one of {options}")
return value
@@ -135,6 +138,23 @@ def _stepped(
return validate
def _thermistor_resistance(value: object) -> float | str:
if isinstance(value, str) and value.lower() == THERMISTOR_NONE:
return THERMISTOR_NONE
value = cv.resistance(value)
if round(value) not in (kilohms * 1000 for kilohms in THERMISTOR_RESISTANCES):
options = ", ".join(f"{kilohms}kOhm" for kilohms in THERMISTOR_RESISTANCES)
raise cv.Invalid(f"Must be one of {options} or {THERMISTOR_NONE}")
return value
def thermistor_beta(config: ConfigType) -> int:
"""The B constant of the hub's thermistor: the configured one, or the one listed for its resistance."""
if (beta := config.get(CONF_THERMISTOR_BETA)) is not None:
return beta
return THERMISTOR_BETAS[round(config[CONF_THERMISTOR_RESISTANCE] / 1000)]
OUTPUT_VOLTAGE = _stepped(cv.voltage, 1000, 3300, 100, "V")
VBUS_CURRENT_LIMIT = _stepped(cv.current, 100, 1500, 100, "A")
@@ -150,15 +170,58 @@ LDO_SCHEMA = BUCK_SCHEMA.extend(
}
)
CHARGER_SCHEMA = cv.Schema(
WARM_TERMINATION_VOLTAGE_DEFAULT = 3.6
def _warm_termination_default(config: ConfigType) -> ConfigType:
"""Keep the default warm termination voltage at or below the termination voltage.
Warn when the default stays below a higher termination voltage.
"""
if (
not isinstance(config, dict)
or CONF_WARM_TERMINATION_VOLTAGE in config
or CONF_TERMINATION_VOLTAGE not in config
):
return config
try:
termination = cv.voltage(config[CONF_TERMINATION_VOLTAGE])
except cv.Invalid:
# The schema reports it
return config
if termination < WARM_TERMINATION_VOLTAGE_DEFAULT - 0.001:
# A warm battery is never charged higher than a cool one
return {
**config,
CONF_WARM_TERMINATION_VOLTAGE: config[CONF_TERMINATION_VOLTAGE],
}
if termination > WARM_TERMINATION_VOLTAGE_DEFAULT + 0.001:
_LOGGER.warning(
"npm1300 '%s' is not set, so a warm battery (45 °C to 60 °C by default) stops "
"charging at %.2fV instead of the %.2fV of '%s'. Set '%s' to the value your "
"battery allows when warm",
CONF_WARM_TERMINATION_VOLTAGE,
WARM_TERMINATION_VOLTAGE_DEFAULT,
termination,
CONF_TERMINATION_VOLTAGE,
CONF_WARM_TERMINATION_VOLTAGE,
)
return config
_CHARGER_SETTINGS_SCHEMA = cv.Schema(
{
cv.Required(CONF_CHARGE_CURRENT): _stepped(cv.current, 32, 800, 2, "A"),
cv.Optional(CONF_TERMINATION_VOLTAGE, default="4.2V"): _one_of_units(
cv.voltage, TERMINATION_VOLTAGES, "V"
# Defaults are the reset values of the product specification
cv.Optional(CONF_CHARGE_CURRENT, default="32mA"): _stepped(
cv.current, 32, 800, 2, "A"
),
cv.Optional(CONF_WARM_TERMINATION_VOLTAGE): _one_of_units(
cv.Optional(CONF_TERMINATION_VOLTAGE, default="3.6V"): _one_of_units(
cv.voltage, TERMINATION_VOLTAGES, "V"
),
cv.Optional(
CONF_WARM_TERMINATION_VOLTAGE,
default=f"{WARM_TERMINATION_VOLTAGE_DEFAULT}V",
): _one_of_units(cv.voltage, TERMINATION_VOLTAGES, "V"),
cv.Optional(CONF_TERMINATION_CURRENT, default="10%"): cv.enum(
TERMINATION_CURRENTS
),
@@ -169,22 +232,37 @@ CHARGER_SCHEMA = cv.Schema(
cv.current, list(DISCHARGE_CURRENT_LIMITS), "A"
),
cv.Optional(CONF_RECHARGE, default=True): cv.boolean,
cv.Optional(CONF_ENABLED, default=True): cv.boolean,
cv.Optional(CONF_ENABLED, default=False): cv.boolean,
}
)
CHARGER_SCHEMA = cv.All(_warm_termination_default, _CHARGER_SETTINGS_SCHEMA)
CONFIG_SCHEMA = (
def _check_thermistor(config: ConfigType) -> ConfigType:
"""A wrong thermistor shifts the battery temperature the charger sees, so charging needs one chosen."""
resistance = config.get(CONF_THERMISTOR_RESISTANCE)
if CONF_CHARGER in config and resistance is None:
raise cv.Invalid(
f"'{CONF_THERMISTOR_RESISTANCE}' is required with '{CONF_CHARGER}': set the nominal "
f"resistance of the battery thermistor, or '{THERMISTOR_NONE}'",
path=[CONF_THERMISTOR_RESISTANCE],
)
if CONF_THERMISTOR_BETA in config and resistance in (None, THERMISTOR_NONE):
raise cv.Invalid(
f"'{CONF_THERMISTOR_BETA}' needs '{CONF_THERMISTOR_RESISTANCE}' set to the "
"resistance of the thermistor",
path=[CONF_THERMISTOR_BETA],
)
return config
CONFIG_SCHEMA = cv.All(
cv.Schema(
{
cv.GenerateID(): cv.declare_id(NPM1300Component),
cv.Optional(CONF_VBUS_CURRENT_LIMIT): VBUS_CURRENT_LIMIT,
cv.Optional(CONF_THERMISTOR_RESISTANCE): _one_of_units(
cv.resistance, list(THERMISTOR_RESISTANCES), "kOhm", scale=0.001
),
cv.Optional(CONF_THERMISTOR_BETA, default=3380): cv.int_range(
min=1, max=65535
),
cv.Optional(CONF_THERMISTOR_RESISTANCE): _thermistor_resistance,
cv.Optional(CONF_THERMISTOR_BETA): cv.int_range(min=1, max=65535),
cv.Optional(CONF_CHARGER): CHARGER_SCHEMA,
cv.Optional(CONF_BUCK1): BUCK_SCHEMA,
cv.Optional(CONF_BUCK2): BUCK_SCHEMA,
@@ -193,7 +271,8 @@ CONFIG_SCHEMA = (
}
)
.extend(cv.polling_component_schema("60s"))
.extend(i2c.i2c_device_schema(0x6B))
.extend(i2c.i2c_device_schema(0x6B)),
_check_thermistor,
)
@@ -208,7 +287,7 @@ def _vbus_current_limit_code(amps: float) -> int:
def _charger_config(config: ConfigType) -> cg.StructInitializer:
termination = _termination_voltage_code(config[CONF_TERMINATION_VOLTAGE])
warm = config.get(CONF_WARM_TERMINATION_VOLTAGE)
warm = _termination_voltage_code(config[CONF_WARM_TERMINATION_VOLTAGE])
return cg.StructInitializer(
NPM1300ChargerConfig,
("current", _millis(config[CONF_CHARGE_CURRENT]) // 2),
@@ -217,10 +296,7 @@ def _charger_config(config: ConfigType) -> cg.StructInitializer:
DISCHARGE_CURRENT_LIMITS[_millis(config[CONF_DISCHARGE_CURRENT_LIMIT])],
),
("termination_voltage", termination),
(
"warm_termination_voltage",
termination if warm is None else _termination_voltage_code(warm),
),
("warm_termination_voltage", warm),
("trickle_voltage", TRICKLE_VOLTAGES[_millis(config[CONF_TRICKLE_VOLTAGE])]),
("termination_current", TERMINATION_CURRENTS[config[CONF_TERMINATION_CURRENT]]),
("recharge", config[CONF_RECHARGE]),
@@ -247,6 +323,13 @@ def _output_config(config: ConfigType | None) -> cg.StructInitializer:
def _config(config: ConfigType) -> cg.StructInitializer:
charger = config.get(CONF_CHARGER)
resistance = config.get(CONF_THERMISTOR_RESISTANCE)
if resistance is None:
thermistor, beta = NPM1300_UNSET, 0
elif resistance == THERMISTOR_NONE:
thermistor, beta = 0, 0
else:
thermistor = THERMISTOR_RESISTANCES[round(resistance / 1000)]
beta = thermistor_beta(config)
return cg.StructInitializer(
NPM1300Config,
(
@@ -254,13 +337,8 @@ def _config(config: ConfigType) -> cg.StructInitializer:
cg.ArrayInitializer(*(_output_config(config.get(key)) for key in OUTPUTS)),
),
("charger", None if charger is None else _charger_config(charger)),
("thermistor_beta", config[CONF_THERMISTOR_BETA]),
(
"thermistor",
NPM1300_UNSET
if resistance is None
else THERMISTOR_RESISTANCES[round(resistance / 1000)],
),
("thermistor_beta", beta),
("thermistor", thermistor),
("charger_configured", charger is not None),
)
+51 -34
View File
@@ -29,6 +29,7 @@ static constexpr uint16_t REG_BCHG_VTERM = 0x030C;
static constexpr uint16_t REG_BCHG_VTERM_R = 0x030D;
static constexpr uint16_t REG_BCHG_VTRICKLE_SEL = 0x030E;
static constexpr uint16_t REG_BCHG_ITERM_SEL = 0x030F;
static constexpr uint16_t REG_BCHG_NTC_STATUS = 0x0332;
static constexpr uint16_t REG_BCHG_CHARGE_STATUS = 0x0334;
static constexpr uint16_t REG_BCHG_ERR_REASON = 0x0336;
static constexpr uint16_t REG_BUCK1_ENA_SET = 0x0400;
@@ -53,6 +54,9 @@ static constexpr uint16_t REG_SHIP_TASK_SHIP_MODE = 0x0B02;
// VBUSINSTATUS
static constexpr uint8_t VBUS_PRESENT = 0x01;
// NTCSTATUS
static constexpr uint8_t NTC_STATUS_COLD = 0x01;
static constexpr uint8_t NTC_STATUS_HOT = 0x08;
// BCHGCHARGESTATUS; bit 0 (battery detected) is reserved since C00 silicon
static constexpr uint8_t CHARGE_STATUS_COMPLETED = 0x02;
static constexpr uint8_t CHARGE_STATUS_TRICKLE = 0x04;
@@ -107,26 +111,36 @@ float ntc_temperature(uint16_t code, float inv_beta) {
#endif
#ifdef USE_TEXT_SENSOR
PROGMEM_STRING_TABLE(ChargerStatusStrings, "Error", "Paused, Die Too Hot", "Charge Complete", "Trickle Charge",
"Constant Current", "Constant Voltage", "Discharging", "Not Charging");
// BCHGCHARGESTATUS bits in order of priority; bit i is reported as string i + 1
PROGMEM_STRING_TABLE(ChargerStatusStrings, "Discharging", "Error", "Disabled", "Paused, PMIC Too Hot",
"Charge Complete", "Trickle Charge", "Constant Current", "Constant Voltage",
"Paused, Battery Too Cold", "Paused, Battery Too Hot", "Not Charging");
static constexpr uint8_t CHARGER_STATUS_FIRST_BIT = 3;
// BCHGCHARGESTATUS bits in order of priority, reported from string CHARGER_STATUS_FIRST_BIT on
static const uint8_t CHARGER_STATUS_BITS[] PROGMEM = {CHARGE_STATUS_DIE_TEMP_HIGH, CHARGE_STATUS_COMPLETED,
CHARGE_STATUS_TRICKLE, CHARGE_STATUS_CONSTANT_CURRENT,
CHARGE_STATUS_CONSTANT_VOLTAGE};
static uint8_t charger_status_index(uint8_t vbus_status, uint8_t charge_status, uint8_t error_reason) {
if (error_reason != 0)
static uint8_t charger_status_index(const NPM1300Status &status) {
if ((status.vbus & VBUS_PRESENT) == 0)
return 0;
if (status.error_reason != 0)
return 1;
if ((status.charger_enable & 1) == 0)
return 2;
for (size_t i = 0; i < sizeof(CHARGER_STATUS_BITS); i++) {
if ((charge_status & progmem_read_byte(&CHARGER_STATUS_BITS[i])) != 0)
return i + 1;
if ((status.charge & progmem_read_byte(&CHARGER_STATUS_BITS[i])) != 0)
return CHARGER_STATUS_FIRST_BIT + i;
}
return (vbus_status & VBUS_PRESENT) == 0 ? 6 : 7;
// The charger stops without an error outside the cold and hot limits of the battery temperature
if ((status.ntc & NTC_STATUS_COLD) != 0)
return 8;
if ((status.ntc & NTC_STATUS_HOT) != 0)
return 9;
return 10;
}
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, uint8_t vbus_status, uint8_t charge_status,
uint8_t error_reason) {
const uint8_t index = charger_status_index(vbus_status, charge_status, error_reason);
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, const NPM1300Status &status) {
const uint8_t index = charger_status_index(status);
if (index == last)
return;
last = index;
@@ -198,7 +212,7 @@ bool NPM1300Component::configure_charger_(const NPM1300Config &config) {
split_9bit(charger.discharge_limit, discharge);
uint8_t disable = charger.recharge ? 0 : CHARGER_DISABLE_RECHARGE;
// Without a thermistor the charger reports an NTC error and does not charge
if (config.thermistor == NPM1300_UNSET)
if (config.thermistor == 0 || config.thermistor == NPM1300_UNSET)
disable |= CHARGER_DISABLE_NTC;
const uint8_t enable = (CHARGER_DISABLE_RECHARGE | CHARGER_DISABLE_NTC) & ~disable;
if (this->write_register16(REG_BCHG_ISET_MSB, current, sizeof(current)) != i2c::ERROR_OK ||
@@ -292,33 +306,40 @@ void NPM1300Component::hibernate(uint32_t duration_ms) {
}
void NPM1300Component::update() {
uint8_t vbus_status;
uint8_t charge_status;
uint8_t error_reason;
if (!this->status_comm_check(this->read_byte_reg16(REG_VBUSIN_STATUS, &vbus_status) &&
this->read_byte_reg16(REG_BCHG_CHARGE_STATUS, &charge_status) &&
this->read_byte_reg16(REG_BCHG_ERR_REASON, &error_reason)))
NPM1300Status status;
// NTCSTATUS, DIETEMPSTATUS and BCHGCHARGESTATUS
uint8_t charger_status[3];
if (!this->status_comm_check(this->read_byte_reg16(REG_VBUSIN_STATUS, &status.vbus) &&
this->read_byte_reg16(REG_BCHG_ENABLE_SET, &status.charger_enable) &&
this->read_register16(REG_BCHG_NTC_STATUS, charger_status, sizeof(charger_status)) ==
i2c::ERROR_OK &&
this->read_byte_reg16(REG_BCHG_ERR_REASON, &status.error_reason)))
return;
status.ntc = charger_status[0];
status.charge = charger_status[2];
// Without a thermistor the NTC pin is grounded and can read as a hot battery
if (progmem_read_byte(&this->config_->thermistor) == 0)
status.ntc = 0;
// The chip goes back to its default VBUS current limit whenever VBUS is removed
const bool vbus_present = (vbus_status & VBUS_PRESENT) != 0;
const bool vbus_present = (status.vbus & VBUS_PRESENT) != 0;
if (vbus_present && !this->vbus_present_ && this->vbus_current_limit_ != NPM1300_UNSET &&
!this->status_comm_check(this->apply_vbus_current_limit_()))
return;
this->vbus_present_ = vbus_present;
if (error_reason != this->last_error_reason_) {
this->last_error_reason_ = error_reason;
if (error_reason != 0) {
ESP_LOGW(TAG, "Charger error, BCHGERRREASON 0x%02X", error_reason);
if (status.error_reason != this->last_error_reason_) {
this->last_error_reason_ = status.error_reason;
if (status.error_reason != 0) {
ESP_LOGW(TAG, "Charger error, BCHGERRREASON 0x%02X", status.error_reason);
}
}
#ifdef USE_NPM1300_STATUS_PUBLISHER
if (this->status_publisher_ != nullptr)
this->status_publisher_(vbus_status, charge_status, error_reason);
this->status_publisher_(status);
#endif
#ifdef USE_SWITCH
if (!this->status_comm_check(this->publish_switches_()))
if (!this->status_comm_check(this->publish_switches_(status)))
return;
#endif
@@ -348,16 +369,10 @@ void NPM1300Component::update() {
}
#ifdef USE_SWITCH
bool NPM1300Component::publish_switches_() {
bool NPM1300Component::publish_switches_(const NPM1300Status &status) {
PUBLISH_STATE(this->charger_switch_, (status.charger_enable & 1) != 0);
uint8_t value;
bool ok = true;
if (this->charger_switch_ != nullptr) {
if (this->read_byte_reg16(REG_BCHG_ENABLE_SET, &value)) {
this->charger_switch_->publish_state((value & 1) != 0);
} else {
ok = false;
}
}
switch_::Switch *const bucks[2] = {this->buck1_switch_, this->buck2_switch_};
if (bucks[0] != nullptr || bucks[1] != nullptr) {
if (this->read_byte_reg16(REG_BUCK_STATUS, &value)) {
@@ -461,7 +476,9 @@ void NPM1300Component::dump_config() {
ESP_LOGCONFIG(TAG, " Enabled at boot: %s", YESNO(output.enabled != 0));
}
}
if (config.thermistor != NPM1300_UNSET) {
if (config.thermistor == 0) {
ESP_LOGCONFIG(TAG, " Thermistor: none");
} else if (config.thermistor != NPM1300_UNSET) {
ESP_LOGCONFIG(TAG, " Thermistor B constant: %u", config.thermistor_beta);
}
#ifdef USE_SENSOR
+13 -5
View File
@@ -54,10 +54,19 @@ struct NPM1300Config {
NPM1300OutputConfig outputs[NPM1300_OUTPUT_COUNT];
NPM1300ChargerConfig charger; // only applied when charger_configured
uint16_t thermistor_beta;
uint8_t thermistor; // ADCNTCRSEL code: 1 for 10 kOhm, 2 for 47 kOhm, 3 for 100 kOhm, or NPM1300_UNSET
uint8_t thermistor; // ADCNTCRSEL code: 0 for none, 1 for 10 kOhm, 2 for 47 kOhm, 3 for 100 kOhm, or NPM1300_UNSET
bool charger_configured;
};
/// The status registers read on every update
struct NPM1300Status {
uint8_t vbus; // VBUSINSTATUS
uint8_t charger_enable; // BCHGENABLESET
uint8_t ntc; // NTCSTATUS
uint8_t charge; // BCHGCHARGESTATUS
uint8_t error_reason; // BCHGERRREASON
};
#ifdef USE_NPM1300_DATA_PUBLISHER
/// The 10-bit ADC result whose high 8 bits are adc[msb] and low 2 bits are at `shift` in adc[lsbs]
inline uint16_t adc_code(const uint8_t *adc, uint8_t msb, uint8_t lsbs, uint8_t shift) {
@@ -68,8 +77,7 @@ float ntc_temperature(uint16_t code, float inv_beta);
#endif
#ifdef USE_TEXT_SENSOR
/// Publish the charger status text, only when it differs from `last`
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, uint8_t vbus_status, uint8_t charge_status,
uint8_t error_reason);
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, const NPM1300Status &status);
#endif
class NPM1300Component : public PollingComponent, public i2c::I2CDevice {
@@ -95,7 +103,7 @@ class NPM1300Component : public PollingComponent, public i2c::I2CDevice {
float get_setup_priority() const override { return setup_priority::BUS - 1.0f; }
#ifdef USE_NPM1300_STATUS_PUBLISHER
HUB_PUBLISHER(status, uint8_t, uint8_t, uint8_t)
HUB_PUBLISHER(status, const NPM1300Status &)
#endif
#ifdef USE_NPM1300_DATA_PUBLISHER
HUB_PUBLISHER(data, const uint8_t *, float)
@@ -128,7 +136,7 @@ class NPM1300Component : public PollingComponent, public i2c::I2CDevice {
#endif
#ifdef USE_SWITCH
/// Returns false when a status read failed
bool publish_switches_();
bool publish_switches_(const NPM1300Status &status);
#endif
const NPM1300Config *config_;
+6 -5
View File
@@ -21,7 +21,6 @@ from esphome.types import ConfigType
from . import (
ADC,
CONF_NPM1300_ID,
CONF_THERMISTOR_BETA,
CONF_THERMISTOR_RESISTANCE,
CONF_VBUS_CURRENT_LIMIT,
DATA_PUBLISHER,
@@ -30,7 +29,9 @@ from . import (
DUMP_TAG,
IBAT_SCALE,
NPM1300_CHILD_SCHEMA,
THERMISTOR_NONE,
npm1300_ns,
thermistor_beta,
)
DEPENDENCIES = ["npm1300"]
@@ -109,10 +110,10 @@ def _final_validate(config: ConfigType) -> None:
if CONF_BATTERY_TEMPERATURE not in config:
return
hub = fv.get_declaring_config(config[CONF_NPM1300_ID])
if CONF_THERMISTOR_RESISTANCE not in hub:
if hub.get(CONF_THERMISTOR_RESISTANCE, THERMISTOR_NONE) == THERMISTOR_NONE:
raise cv.Invalid(
f"'{CONF_BATTERY_TEMPERATURE}' needs '{CONF_THERMISTOR_RESISTANCE}' "
"set on the npm1300 component",
f"'{CONF_BATTERY_TEMPERATURE}' needs '{CONF_THERMISTOR_RESISTANCE}' set to the "
"nominal resistance of the battery thermistor on the npm1300 component",
path=[CONF_BATTERY_TEMPERATURE],
)
@@ -145,7 +146,7 @@ async def to_code(config: ConfigType) -> None:
if (var := await sensors(CONF_BATTERY_TEMPERATURE, None)) is not None:
hub_config = next(c for c in CORE.config[DOMAIN] if c[CONF_ID] == hub_id)
state = npm1300_ns.ntc_temperature(
_adc(2, 5, 2), 1.0 / hub_config[CONF_THERMISTOR_BETA]
_adc(2, 5, 2), 1.0 / thermistor_beta(hub_config)
)
_add_adc_sensor(hub, var, state, "Battery Temperature")
await sensors(CONF_VBUS_CURRENT_LIMIT, hub.set_vbus_current_limit_sensor)
+12 -4
View File
@@ -15,6 +15,7 @@ from . import (
CONF_THERMISTOR_RESISTANCE,
NPM1300_CHILD_SCHEMA,
OUTPUTS,
THERMISTOR_NONE,
)
DEPENDENCIES = ["npm1300"]
@@ -44,11 +45,18 @@ def _final_validate(config: ConfigType) -> None:
if CONF_CHARGER not in config:
return
hub = fv.get_declaring_config(config[CONF_NPM1300_ID])
# Only the charger block turns off the NTC check, without which the charger never starts
if CONF_CHARGER not in hub and CONF_THERMISTOR_RESISTANCE not in hub:
# A wrong thermistor shifts the battery temperature the charger sees
if CONF_THERMISTOR_RESISTANCE not in hub:
raise cv.Invalid(
f"The '{CONF_CHARGER}' switch needs a '{CONF_CHARGER}' block or "
f"'{CONF_THERMISTOR_RESISTANCE}' on the npm1300 component",
f"The '{CONF_CHARGER}' switch needs '{CONF_THERMISTOR_RESISTANCE}' on the npm1300 "
f"component: the nominal resistance of the battery thermistor, or '{THERMISTOR_NONE}'",
path=[CONF_CHARGER],
)
# Only the charger block turns off the NTC check, without which the charger never starts
if CONF_CHARGER not in hub and hub[CONF_THERMISTOR_RESISTANCE] == THERMISTOR_NONE:
raise cv.Invalid(
f"The '{CONF_CHARGER}' switch needs a '{CONF_CHARGER}' block when "
f"'{CONF_THERMISTOR_RESISTANCE}' is '{THERMISTOR_NONE}'",
path=[CONF_CHARGER],
)
+2 -6
View File
@@ -11,14 +11,12 @@ from esphome.cpp_generator import (
from esphome.types import ConfigType
from . import (
CHARGE_STATUS,
CONF_NPM1300_ID,
DUMP,
DUMP_TAG,
ERROR_REASON,
NPM1300_CHILD_SCHEMA,
STATUS,
STATUS_PUBLISHER,
VBUS_STATUS,
npm1300_ns,
)
@@ -48,9 +46,7 @@ async def to_code(config: ConfigType) -> None:
)
STATUS_PUBLISHER.add(
hub,
npm1300_ns.publish_charger_status(
parent_ref(var), last, VBUS_STATUS, CHARGE_STATUS, ERROR_REASON
),
npm1300_ns.publish_charger_status(parent_ref(var), last, STATUS),
)
DUMP.add(
hub,
+10 -3
View File
@@ -13,6 +13,7 @@ from esphome.build_helpers.ccache import resolve_ccache_path
import esphome.codegen as cg
from esphome.components import network
from esphome.components.zephyr import (
PreferenceStorage,
Section,
add_extra_script,
copy_files as zephyr_copy_files,
@@ -106,6 +107,7 @@ from .const import (
VARIANT_NRF52832,
VARIANT_NRF52840,
VARIANT_REGULATOR,
VARIANTS_NRF54L,
VARIANTS_WITHOUT_USB,
)
from .framework import (
@@ -536,6 +538,11 @@ def _final_validate(config):
FINAL_VALIDATE_SCHEMA = _final_validate
def _preferences_storage(variant: str) -> PreferenceStorage:
"""The storage for preferences: ZMS on the RRAM of the nRF54L, NVS on flash."""
return "ZMS" if variant in VARIANTS_NRF54L else "NVS"
@coroutine_with_priority(CoroPriority.PLATFORM)
async def to_code(config: ConfigType) -> None:
"""Convert the configuration to code."""
@@ -544,7 +551,7 @@ async def to_code(config: ConfigType) -> None:
variant = get_nrf52_variant()
cg.add_define("ESPHOME_VARIANT", variant)
cg.add_build_flag(f"-DUSE_NRF52_VARIANT_{variant}")
if variant in (VARIANT_NRF54L15, VARIANT_NRF54LM20):
if variant in VARIANTS_NRF54L:
# The entropy driver runs on the CRACEN crypto unit, which needs Nordic's PSA crypto
include_west_project("mbedtls")
include_west_project("oberon-psa-crypto")
@@ -612,11 +619,11 @@ async def to_code(config: ConfigType) -> None:
if config[KEY_BOOTLOADER] in ADAFRUIT_BOOTLOADERS:
cg.add_define("USE_BOOTLOADER_ADAFRUIT")
zephyr_setup_preferences()
zephyr_setup_preferences(_preferences_storage(variant))
zephyr_to_code(config)
# The nRF54L has RRAM (cpuapp_rram) and no flash0 node
if CORE.testing_mode and variant not in (VARIANT_NRF54L15, VARIANT_NRF54LM20):
if CORE.testing_mode and variant not in VARIANTS_NRF54L:
zephyr_add_overlay(
f"""
&flash0 {{
+2 -1
View File
@@ -17,6 +17,7 @@ from .const import (
VARIANT_NRF54LM20,
VARIANT_NRF52832,
VARIANT_NRF52840,
VARIANTS_NRF54L,
)
from .framework import (
check_and_install,
@@ -145,7 +146,7 @@ def upload_using_cmsis_dap(unique_id: str | None = None) -> None:
pyocd = [str(paths["python_executable"]), "-m", "pyocd"]
probe = ["-t", target] + (["-u", unique_id] if unique_id else [])
cmd = [*pyocd, "flash", "--no-wait", *probe, "-e", "sector"]
if variant in (VARIANT_NRF54L15, VARIANT_NRF54LM20):
if variant in VARIANTS_NRF54L:
cmd += ["--script", str(_NRF54L_WATCHDOG_SCRIPT)]
cmd += [str(image) for image in images]
if not run_command_ok(cmd, env=env, stream_output=True):
+2
View File
@@ -41,6 +41,8 @@ VARIANT_I2C = {
VARIANT_NRF54LM20: VariantI2C("i2c21", (1, 3)),
}
VARIANTS_WITHOUT_USB = frozenset({VARIANT_NRF52832, VARIANT_NRF54L15})
# The nRF54L family: RRAM instead of flash, the CRACEN crypto unit and the wdt31 watchdog
VARIANTS_NRF54L = frozenset({VARIANT_NRF54L15, VARIANT_NRF54LM20})
# Devicetree label of the main regulator, reg1 on the others
VARIANT_REGULATOR = {VARIANT_NRF52832: "reg"}
VARIANT_FLASH_SIZE = {VARIANT_NRF52832: 0x80000, VARIANT_NRF52840: 0x100000}
+11 -13
View File
@@ -10,12 +10,10 @@ CODEOWNERS = ["@kahrendt"]
qwiic_pir_ns = cg.esphome_ns.namespace("qwiic_pir")
DebounceMode = qwiic_pir_ns.enum("DebounceMode")
DEBOUNCE_MODE_OPTIONS = {
"RAW": DebounceMode.RAW_DEBOUNCE_MODE,
"NATIVE": DebounceMode.NATIVE_DEBOUNCE_MODE,
"HYBRID": DebounceMode.HYBRID_DEBOUNCE_MODE,
}
DebounceMode = qwiic_pir_ns.enum("DebounceMode", is_class=True)
DEBOUNCE_MODE_OPTIONS = DebounceMode.options(
"RAW", "NATIVE", "HYBRID", prefix="DEBOUNCE_MODE_"
)
CONF_DEBOUNCE_MODE = "debounce_mode"
@@ -47,12 +45,12 @@ CONFIG_SCHEMA = cv.All(
async def to_code(config: ConfigType) -> None:
var = await binary_sensor.new_binary_sensor(config)
# Without a debounce time the device is set to 1 ms; NATIVE is the only mode that takes one
debounce = config.get(CONF_DEBOUNCE)
var = await binary_sensor.new_binary_sensor(
config,
config[CONF_DEBOUNCE_MODE],
1 if debounce is None else debounce.total_milliseconds,
)
await cg.register_component(var, config)
await i2c.register_i2c_device(var, config)
if debounce_time_setting := config.get(CONF_DEBOUNCE):
cg.add(var.set_debounce_time(debounce_time_setting.total_milliseconds))
else:
cg.add(var.set_debounce_time(1)) # default to 1 ms if not configured
cg.add(var.set_debounce_mode(config[CONF_DEBOUNCE_MODE]))
+51 -65
View File
@@ -1,99 +1,85 @@
#include "qwiic_pir.h"
#include "esphome/core/log.h"
#include "esphome/core/progmem.h"
namespace esphome::qwiic_pir {
ESPHOME_LOG_TAG(TAG, "qwiic_pir");
static constexpr uint8_t REG_CHIP_ID = 0x00;
static constexpr uint8_t REG_EVENT_STATUS = 0x03;
static constexpr uint8_t REG_DEBOUNCE_TIME = 0x05; // milliseconds, 16 bits little endian
static constexpr uint8_t DEVICE_ID = 0x72;
// REG_EVENT_STATUS bits
static constexpr uint8_t EVENT_RAW_READING = 0x01; // raw state of the PIR sensor
static constexpr uint8_t EVENT_AVAILABLE = 0x02; // a debounced object was detected or removed
static constexpr uint8_t EVENT_OBJECT_REMOVED = 0x04; // a debounced object is no longer detected
static constexpr uint8_t EVENT_OBJECT_DETECTED = 0x08; // a debounced object has been detected
// Indexed by DebounceMode
PROGMEM_STRING_TABLE(DebounceModeStrings, "RAW", "NATIVE", "HYBRID");
void QwiicPIRComponent::setup() {
if (!this->check_chip_id(this, QWIIC_PIR_CHIP_ID, QWIIC_PIR_DEVICE_ID))
if (!this->check_chip_id(this, REG_CHIP_ID, DEVICE_ID))
return;
if (!this->setup_check(this->write_byte_16(QWIIC_PIR_DEBOUNCE_TIME, this->debounce_time_),
if (!this->setup_check(this->write_byte_16_le(REG_DEBOUNCE_TIME, this->debounce_time_),
LOG_STR("Failed to configure debounce time")))
return;
if (this->debounce_mode_ == NATIVE_DEBOUNCE_MODE) {
// Publish the starting raw state of the PIR sensor
// If NATIVE mode, the binary_sensor state would be unknown until a motion event
if (!this->setup_check(this->read_byte(QWIIC_PIR_EVENT_STATUS, &this->event_register_.reg),
LOG_STR("Failed to read initial state")))
if (this->debounce_mode_ == DebounceMode::DEBOUNCE_MODE_NATIVE) {
// NATIVE only publishes on motion events, so start from the raw state
uint8_t event;
if (!this->setup_check(this->read_byte(REG_EVENT_STATUS, &event), LOG_STR("Failed to read initial state")))
return;
this->publish_state(this->event_register_.raw_reading);
this->publish_state((event & EVENT_RAW_READING) != 0);
}
}
void QwiicPIRComponent::loop() {
// Read Event Register
if (!this->read_byte(QWIIC_PIR_EVENT_STATUS, &this->event_register_.reg)) {
ESP_LOGW(TAG, ESP_LOG_MSG_COMM_FAIL);
uint8_t event;
if (!this->status_comm_check(this->read_byte(REG_EVENT_STATUS, &event)))
return;
switch (this->debounce_mode_) {
case DebounceMode::DEBOUNCE_MODE_HYBRID:
// The device debounces for 1 ms and ESPHome filters do the rest; any event means motion since the last loop
this->publish_state((event & (EVENT_RAW_READING | EVENT_AVAILABLE)) != 0);
break;
case DebounceMode::DEBOUNCE_MODE_NATIVE:
// The device's own debounce, as in SparkFun's Example2_PrintPIRStatus; it often misses objects being removed
if (event & EVENT_AVAILABLE) {
if (event & EVENT_OBJECT_DETECTED)
this->publish_state(true);
if (event & EVENT_OBJECT_REMOVED)
this->publish_state(false);
}
break;
case DebounceMode::DEBOUNCE_MODE_RAW:
// Can miss a very short detection when the loop is slow
this->publish_state((event & EVENT_RAW_READING) != 0);
break;
}
if (this->debounce_mode_ == HYBRID_DEBOUNCE_MODE) {
// Use a combination of the raw sensor reading and the device's event detection to determine state
// - The device is hardcoded to use a debounce time of 1 ms in this mode
// - Any event, even if it is object_removed, implies motion was active since the last loop, so publish true
// - Use ESPHome's built-in filters for debouncing
this->publish_state(this->event_register_.raw_reading || this->event_register_.event_available);
if (this->event_register_.event_available) {
this->clear_events_();
}
} else if (this->debounce_mode_ == NATIVE_DEBOUNCE_MODE) {
// Uses the device's firmware to debounce the signal
// - Follows the logic of SparkFun's example implementation:
// https://github.com/sparkfun/SparkFun_Qwiic_PIR_Arduino_Library/blob/master/examples/Example2_PrintPIRStatus/Example2_PrintPIRStatus.ino
// (accessed July 2023)
// - Is unreliable at detecting an object being removed, especially at debounce rates even slightly large
if (this->event_register_.event_available) {
// If an object is detected, publish true
if (this->event_register_.object_detected)
this->publish_state(true);
// If an object has been removed, publish false
if (this->event_register_.object_removed)
this->publish_state(false);
this->clear_events_();
}
} else if (this->debounce_mode_ == RAW_DEBOUNCE_MODE) {
// Publishes the raw PIR sensor reading with no further logic
// - May miss a very short motion detection if the ESP's loop time is slow
this->publish_state(this->event_register_.raw_reading);
}
// HYBRID and NATIVE clear a handled event; the last bus step of the poll decides the warning
bool ok = true;
if (this->debounce_mode_ != DebounceMode::DEBOUNCE_MODE_RAW && (event & EVENT_AVAILABLE))
ok = this->write_byte(REG_EVENT_STATUS, 0x00);
this->status_comm_result(ok);
}
void QwiicPIRComponent::dump_config() {
static const char *const RAW = "RAW";
static const char *const NATIVE = "NATIVE";
static const char *const HYBRID = "HYBRID";
const char *debounce_mode_str = RAW;
if (this->debounce_mode_ == NATIVE_DEBOUNCE_MODE) {
debounce_mode_str = NATIVE;
} else if (this->debounce_mode_ == HYBRID_DEBOUNCE_MODE) {
debounce_mode_str = HYBRID;
}
ESP_LOGCONFIG(TAG,
"Qwiic PIR:\n"
" Debounce Mode: %s",
debounce_mode_str);
if (this->debounce_mode_ == NATIVE_DEBOUNCE_MODE) {
LOG_STR_ARG(DebounceModeStrings::get_log_str(static_cast<uint8_t>(this->debounce_mode_), 0)));
if (this->debounce_mode_ == DebounceMode::DEBOUNCE_MODE_NATIVE) {
ESP_LOGCONFIG(TAG, " Debounce Time: %ums", this->debounce_time_);
}
LOG_I2C_DEVICE(this);
LOG_BINARY_SENSOR(" ", "Binary Sensor", this);
}
void QwiicPIRComponent::clear_events_() {
// Clear event status register
if (!this->write_byte(QWIIC_PIR_EVENT_STATUS, 0x00)) {
ESP_LOGW(TAG, "Failed to clear events");
}
}
} // namespace esphome::qwiic_pir
+11 -35
View File
@@ -2,8 +2,8 @@
* Adds support for Qwiic PIR motion sensors that communicate over an I2C bus.
* These sensors use Sharp PIR motion sensors to detect motion. A firmware running on an ATTiny84 translates the digital
* output to I2C communications.
* ATTiny84 firmware: https://github.com/sparkfun/Qwiic_PIR (accessed July 2023)
* SparkFun's Arduino library: https://github.com/sparkfun/SparkFun_Qwiic_PIR_Arduino_Library (accessed July 2023)
* ATTiny84 firmware: https://github.com/sparkfun/Qwiic_PIR
* SparkFun's Arduino library: https://github.com/sparkfun/SparkFun_Qwiic_PIR_Arduino_Library
*/
#pragma once
@@ -14,48 +14,24 @@
namespace esphome::qwiic_pir {
// Qwiic PIR I2C Register Addresses
enum {
QWIIC_PIR_CHIP_ID = 0x00,
QWIIC_PIR_EVENT_STATUS = 0x03,
QWIIC_PIR_DEBOUNCE_TIME = 0x05, // uint16_t debounce time in milliseconds
enum class DebounceMode : uint8_t {
DEBOUNCE_MODE_RAW,
DEBOUNCE_MODE_NATIVE,
DEBOUNCE_MODE_HYBRID,
};
enum DebounceMode {
RAW_DEBOUNCE_MODE,
NATIVE_DEBOUNCE_MODE,
HYBRID_DEBOUNCE_MODE,
};
static const uint8_t QWIIC_PIR_DEVICE_ID = 0x72;
class QwiicPIRComponent final : public Component, public i2c::I2CDevice, public binary_sensor::BinarySensor {
public:
QwiicPIRComponent(DebounceMode debounce_mode, uint16_t debounce_time)
: debounce_time_(debounce_time), debounce_mode_(debounce_mode) {}
void setup() override;
void loop() override;
void dump_config() override;
void set_debounce_time(uint16_t debounce_time) { this->debounce_time_ = debounce_time; }
void set_debounce_mode(DebounceMode mode) { this->debounce_mode_ = mode; }
protected:
uint16_t debounce_time_{};
DebounceMode debounce_mode_{};
union {
struct {
bool raw_reading : 1; // raw state of PIR sensor
bool event_available : 1; // a debounced object has been detected or removed
bool object_removed : 1; // a debounced object is no longer detected
bool object_detected : 1; // a debounced object has been detected
bool : 4;
};
uint8_t reg;
} event_register_ = {.reg = 0};
void clear_events_();
uint16_t debounce_time_;
DebounceMode debounce_mode_;
};
} // namespace esphome::qwiic_pir
@@ -15,6 +15,9 @@ namespace esphome::uart {
ESPHOME_LOG_TAG(TAG, "uart");
// GPIO32-47 (RP2350B) and GPIO64 (CYW43) are in no mask; a 32-bit shift by them is undefined.
static constexpr bool pin_in_mask(uint8_t pin, uint32_t mask) { return pin < 32 && (mask & (1U << pin)) != 0; }
uint16_t RP2UartComponent::get_config() {
uint16_t config = 0;
@@ -81,9 +84,9 @@ void RP2UartComponent::setup() {
if (this->tx_pin_->is_inverted()) {
ESP_LOGD(TAG, "An inverted TX pin %u can only be used with SerialPIO", this->tx_pin_->get_pin());
} else {
if (((1 << this->tx_pin_->get_pin()) & valid_tx_uart_0) != 0) {
if (pin_in_mask(this->tx_pin_->get_pin(), valid_tx_uart_0)) {
tx_hw = 0;
} else if (((1 << this->tx_pin_->get_pin()) & valid_tx_uart_1) != 0) {
} else if (pin_in_mask(this->tx_pin_->get_pin(), valid_tx_uart_1)) {
tx_hw = 1;
} else {
ESP_LOGD(TAG, "TX pin %u can only be used with SerialPIO", this->tx_pin_->get_pin());
@@ -95,9 +98,9 @@ void RP2UartComponent::setup() {
if (this->rx_pin_->is_inverted()) {
ESP_LOGD(TAG, "An inverted RX pin %u can only be used with SerialPIO", this->rx_pin_->get_pin());
} else {
if (((1 << this->rx_pin_->get_pin()) & valid_rx_uart_0) != 0) {
if (pin_in_mask(this->rx_pin_->get_pin(), valid_rx_uart_0)) {
rx_hw = 0;
} else if (((1 << this->rx_pin_->get_pin()) & valid_rx_uart_1) != 0) {
} else if (pin_in_mask(this->rx_pin_->get_pin(), valid_rx_uart_1)) {
rx_hw = 1;
} else {
ESP_LOGD(TAG, "RX pin %u can only be used with SerialPIO", this->rx_pin_->get_pin());
+11 -3
View File
@@ -1,7 +1,7 @@
from collections.abc import Callable
from pathlib import Path
import textwrap
from typing import NamedTuple, TypedDict
from typing import Literal, NamedTuple, TypedDict
import esphome.codegen as cg
import esphome.config_validation as cv
@@ -212,10 +212,18 @@ async def _cdc_acm_to_code() -> None:
_cdc_acm_add_ports()
def zephyr_setup_preferences() -> None:
PreferenceStorage = Literal["NVS", "ZMS"]
def zephyr_setup_preferences(storage: PreferenceStorage = "NVS") -> None:
"""Store preferences through the settings subsystem.
`storage` picks the Zephyr storage backend: NVS for flash, ZMS for RRAM and MRAM.
"""
cg.add(zephyr_ns.setup_preferences())
zephyr_add_prj_conf("SETTINGS", True)
zephyr_add_prj_conf("NVS", True)
zephyr_add_prj_conf(storage, True)
zephyr_add_prj_conf(f"SETTINGS_{storage}", True)
zephyr_add_prj_conf("FLASH_MAP", True)
zephyr_add_prj_conf("FLASH", True)
+3 -25
View File
@@ -153,7 +153,6 @@
#define USE_LINE_READER
#define USE_LOCK
#define USE_LOGGER
#define USE_LOGGER_CONSOLE
#define USE_LOGGER_LEVEL_LISTENERS
#define USE_LOGGER_RUNTIME_TAG_LEVELS
#define USE_LVGL
@@ -768,26 +767,16 @@
#if defined(USE_ESP32_VARIANT_ESP32S2)
#define USE_LOGGER_USB_CDC
#define USE_LOGGER_UART_SELECTION_USB_CDC
#define ESPHOME_LOGGER_UART_NAME "USB_CDC"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_USB_CDC
#elif defined(USE_ESP32_VARIANT_ESP32H21)
#define USE_LOGGER_USB_SERIAL_JTAG
#define USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG
#define ESPHOME_LOGGER_UART_NAME "USB_SERIAL_JTAG"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_USB_SERIAL_JTAG
#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32C5) || \
defined(USE_ESP32_VARIANT_ESP32C6) || defined(USE_ESP32_VARIANT_ESP32C61) || defined(USE_ESP32_VARIANT_ESP32H2) || \
defined(USE_ESP32_VARIANT_ESP32H4) || defined(USE_ESP32_VARIANT_ESP32P4) || defined(USE_ESP32_VARIANT_ESP32S3) || \
defined(USE_ESP32_VARIANT_ESP32S31)
defined(USE_ESP32_VARIANT_ESP32H21) || defined(USE_ESP32_VARIANT_ESP32H4) || defined(USE_ESP32_VARIANT_ESP32P4) || \
defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32S31)
#define USE_LOGGER_USB_CDC
#define USE_LOGGER_UART_SELECTION_USB_CDC
#define USE_LOGGER_USB_SERIAL_JTAG
#define USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG
#define ESPHOME_LOGGER_UART_NAME "USB_SERIAL_JTAG"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_USB_SERIAL_JTAG
#else
#define USE_LOGGER_UART_SELECTION_UART0
#define ESPHOME_LOGGER_UART_NAME "UART0"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_UART0
#endif
#endif
@@ -801,9 +790,6 @@
#define USE_WIFI_SCAN_RESULTS_LOCK
#define USE_ESP8266_LOGGER_SERIAL
#define USE_ESP8266_LOGGER_SERIAL1
#define USE_LOGGER_UART_SELECTION_UART0
#define ESPHOME_LOGGER_UART_NAME "UART0"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_UART0
#define USE_ESP8266_PREFERENCES_FLASH
#define ESP8266_PREFERENCES_FLASH_WORDS 128
#define ESP8266_PREFERENCES_RTC_EBOOT_WORDS 32
@@ -849,8 +835,6 @@
#define USE_I2C
#define USE_LOGGER_USB_CDC
#define USE_LOGGER_UART_SELECTION_USB_CDC
#define ESPHOME_LOGGER_UART_NAME "USB_CDC"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_USB_CDC
#define USE_SOCKET_IMPL_LWIP_TCP
#define USE_RP2040_BLE
#define USE_RP2_BLE_TRACKER
@@ -881,9 +865,6 @@
#if defined(USE_BK72XX) || defined(USE_RTL87XX) || defined(USE_LN882X)
#define USE_LIBRETINY_CRASH_HANDLER
#endif
#define USE_LOGGER_UART_SELECTION_DEFAULT
#define ESPHOME_LOGGER_UART_NAME "DEFAULT"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_DEFAULT
#ifdef USE_BK72XX
#define USE_REMOTE_RECEIVER_TIMER_SAMPLING
#endif
@@ -938,11 +919,8 @@
#define ESPHOME_TASK_LOG_BUFFER_SIZE 768
#define USE_LOGGER_EARLY_MESSAGE
#define USE_LOGGER_UART_SELECTION_USB_CDC
#define ESPHOME_LOGGER_UART_NAME "USB_CDC"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_USB_CDC
#define USE_LOGGER_USB_CDC
#define USE_LOGGER_WAIT_FOR_CDC
#define USE_LOGGER_ZEPHYR_CDC_LOOP
#define USE_NRF52_DFU
#define USE_NRF52_REG0_VOUT 5
#define USE_NRF52_UICR_ERASE
+3 -1
View File
@@ -846,7 +846,9 @@ def convert_visual_temperatures(
that needs ``full_config`` is left for final validation, which runs this again with it."""
if (unit := entity_temperature_unit(config, full_config)) is None:
return config
visual = config[CONF_VISUAL]
# A platform entry that only holds nested entities has no visual section of its own
if (visual := config.get(CONF_VISUAL)) is None:
return config
convert_temperature_keys(visual, (CONF_MIN_TEMPERATURE, CONF_MAX_TEMPERATURE), unit)
section = visual if delta_section is None else visual.get(delta_section)
if section is not None:
@@ -222,6 +222,20 @@ def test_a_resolved_unit_waits_for_the_full_config() -> None:
assert config[CONF_VISUAL][CONF_MIN_TEMPERATURE] == pytest.approx(59.0)
def test_final_validate_skips_a_platform_that_only_holds_nested_climates() -> None:
"""A hub platform may put each of its climates under a key of one platform entry."""
nested = climate_schema(climate_ns.class_("NestedClimate", Climate))
platform_schema = cv.Schema({cv.Optional("zone_1"): nested})
config = platform_schema(
{"zone_1": {CONF_NAME: "Zone 1", CONF_VISUAL: {CONF_MIN_TEMPERATURE: "50°F"}}}
)
# The platform entry itself is not a climate and has no visual section
assert CONF_VISUAL not in config
_final_validate([config])
# The nested climate was converted by its own schema
assert config["zone_1"][CONF_VISUAL][CONF_MIN_TEMPERATURE] == pytest.approx(10.0)
@pytest.mark.parametrize(
("use_fahrenheit", "cn105_lines"),
[
+44 -53
View File
@@ -68,6 +68,38 @@ def test_logger_pre_setup_before_other_components(generate_main):
)
def test_default_uart_selection_is_not_emitted(generate_main):
"""UART0 is the C++ initializer on ESP8266, so the setter is skipped."""
main_cpp = generate_main("tests/component_tests/logger/test_logger.yaml")
assert "set_uart_selection(" not in main_cpp
def test_custom_uart_selection_is_emitted(generate_main):
"""A non default UART still reaches the setter before pre_setup()."""
main_cpp = generate_main("tests/component_tests/logger/test_logger_uart1.yaml")
assert "set_uart_selection(logger::UART_SELECTION_UART1);" in main_cpp
def test_libretiny_default_uart_selection_is_not_emitted(generate_main):
"""DEFAULT is the C++ initializer on LibreTiny, so the setter is skipped."""
main_cpp = generate_main(
"tests/component_tests/logger/test_logger_libretiny_default.yaml"
)
assert "set_uart_selection(" not in main_cpp
def test_libretiny_uart0_is_emitted(generate_main):
"""UART0 is not the LibreTiny initializer, so it must still be set."""
main_cpp = generate_main(
"tests/component_tests/logger/test_logger_libretiny_uart0.yaml"
)
assert "set_uart_selection(logger::UART_SELECTION_UART0);" in main_cpp
def test_ram_log_strings_is_deprecated(
generate_main: Callable[[str | Path], str],
caplog: pytest.LogCaptureFixture,
@@ -136,76 +168,35 @@ def test_log_v2_only_on_native_toolchain(
@pytest.mark.parametrize(
("config", "port", "zephyr_cdc_loop"),
("config", "expected"),
[
pytest.param("test_logger.yaml", "UART0", False, id="esp8266_default"),
pytest.param("test_logger_uart1.yaml", "UART1", False, id="esp8266_uart1"),
pytest.param(
"test_logger_uart0_swap.yaml", "UART0_SWAP", False, id="esp8266_uart0_swap"
),
pytest.param(
"test_logger_libretiny_default.yaml",
"DEFAULT",
False,
id="libretiny_default",
),
pytest.param(
"test_logger_libretiny_uart0.yaml", "UART0", False, id="libretiny_uart0"
),
pytest.param(
"test_logger_rp2_usb_cdc.yaml", "USB_CDC", False, id="rp2_usb_cdc"
),
pytest.param("test_logger_rp2_uart0.yaml", "UART0", False, id="rp2_uart0"),
pytest.param(
"test_logger_esp32_usb_cdc.yaml", "USB_CDC", False, id="esp32_usb_cdc"
),
pytest.param("test_logger_rp2_usb_cdc.yaml", {"USB_CDC"}, id="rp2_usb_cdc"),
pytest.param("test_logger_rp2_uart0.yaml", set(), id="rp2_uart0"),
pytest.param("test_logger_esp32_usb_cdc.yaml", {"USB_CDC"}, id="esp32_usb_cdc"),
pytest.param(
"test_logger_esp32_usb_serial_jtag.yaml",
"USB_SERIAL_JTAG",
False,
{"USB_SERIAL_JTAG"},
id="esp32_usb_serial_jtag",
),
pytest.param(
"test_logger_nrf52_usb_cdc.yaml", "USB_CDC", True, id="nrf52_usb_cdc"
),
pytest.param("test_logger_nrf52_usb_cdc.yaml", {"USB_CDC"}, id="nrf52_usb_cdc"),
# Zephyr polls the USB port only when it logs there
pytest.param(
"test_logger_nrf52_usb_cdc_no_serial.yaml",
"USB_CDC",
False,
id="nrf52_no_serial",
"test_logger_nrf52_usb_cdc_no_serial.yaml", set(), id="nrf52_no_serial"
),
],
)
def test_uart_selection_defines(
generate_main: Callable[[str | Path], str],
config: str,
port: str,
zephyr_cdc_loop: bool,
expected: set[str],
) -> None:
"""The chosen port is fixed at build time: one flag, its enum value and its dump_config name."""
"""USB ports get a selection define, which gates their port code and crash replay."""
generate_main(f"tests/component_tests/logger/{config}")
defines = {d.name: d.value for d in CORE.defines}
prefix = "USE_LOGGER_UART_SELECTION_"
assert {d.removeprefix(prefix) for d in defines if d.startswith(prefix)} == {port}
assert (
str(defines["ESPHOME_LOGGER_UART_SELECTION"])
== f"logger::UART_SELECTION_{port}"
)
assert str(defines["ESPHOME_LOGGER_UART_NAME"]) == f'"{port}"'
assert ("USE_LOGGER_ZEPHYR_CDC_LOOP" in defines) is zephyr_cdc_loop
def test_esp8266_without_serial_dumps_no_port(
generate_main: Callable[[str | Path], str],
) -> None:
"""ESP8266 without serial logging keeps UART0 selected but never opens it."""
generate_main("tests/component_tests/logger/test_logger_no_serial.yaml")
defines = {d.name: d.value for d in CORE.defines}
assert "USE_LOGGER_UART_SELECTION_UART0" in defines
assert str(defines["ESPHOME_LOGGER_UART_NAME"]) == '"NONE"'
assert {
d.name.removeprefix(prefix) for d in CORE.defines if d.name.startswith(prefix)
} == expected
def test_log_listener_slots_count_every_listener(
@@ -1,9 +0,0 @@
---
esphome:
name: test
esp8266:
board: d1_mini_lite
logger:
baud_rate: 0
@@ -1,9 +0,0 @@
---
esphome:
name: test
esp8266:
board: d1_mini_lite
logger:
hardware_uart: UART0_SWAP
+95 -2
View File
@@ -8,11 +8,16 @@ from esphome.components.npm1300 import (
CHARGER_SCHEMA,
NPM1300_UNSET,
OUTPUT_VOLTAGE,
THERMISTOR_NONE,
VBUS_CURRENT_LIMIT,
_charger_config,
_check_thermistor,
_config,
_output_config,
_termination_voltage_code,
_thermistor_resistance,
_vbus_current_limit_code,
thermistor_beta,
)
from esphome.const import CONF_MODE, CONF_VOLTAGE
from esphome.cpp_generator import StructInitializer
@@ -54,10 +59,35 @@ def test_termination_voltage_gap_rejected(voltage: str) -> None:
CHARGER_SCHEMA({"charge_current": "100mA", "termination_voltage": voltage})
def test_warm_termination_defaults_to_termination() -> None:
def test_warm_termination_defaults_to_reset_value() -> None:
fields = _charger({"charge_current": "100mA", "termination_voltage": "4.1V"})
assert fields["termination_voltage"] == "6"
assert fields["warm_termination_voltage"] == "6"
assert fields["warm_termination_voltage"] == "2"
@pytest.mark.parametrize(
("config", "warns"),
[
({"termination_voltage": "4.2V"}, True),
({"termination_voltage": "3.5V"}, False),
({"termination_voltage": "3.6V"}, False),
({}, False),
({"termination_voltage": "4.2V", "warm_termination_voltage": "4.0V"}, False),
],
)
def test_warm_termination_default_warning(
config: ConfigType, warns: bool, caplog: pytest.LogCaptureFixture
) -> None:
CHARGER_SCHEMA(config)
assert ("warm_termination_voltage" in caplog.text) is warns
@pytest.mark.parametrize(("termination", "code"), [("3.5V", "0"), ("3.55V", "1")])
def test_warm_termination_default_not_above_termination(
termination: str, code: str
) -> None:
fields = _charger({"termination_voltage": termination})
assert fields["warm_termination_voltage"] == code
def test_warm_termination_code() -> None:
@@ -112,3 +142,66 @@ def test_vbus_current_limit_code(limit: str, code: int) -> None:
def test_vbus_current_limit_rejected(limit: str) -> None:
with pytest.raises(cv.Invalid):
VBUS_CURRENT_LIMIT(limit)
def test_charger_needs_thermistor() -> None:
with pytest.raises(cv.Invalid, match="thermistor_resistance"):
_check_thermistor({"charger": {}})
config = {"charger": {}, "thermistor_resistance": THERMISTOR_NONE}
assert _check_thermistor(config) is config
@pytest.mark.parametrize("resistance", [None, THERMISTOR_NONE])
def test_thermistor_beta_needs_resistance(resistance: str | None) -> None:
config = {"thermistor_beta": 3380}
if resistance is not None:
config["thermistor_resistance"] = resistance
with pytest.raises(cv.Invalid, match="thermistor_beta"):
_check_thermistor(config)
@pytest.mark.parametrize(
("resistance", "beta"), [(10000.0, 3380), (47000.0, 4050), (100000.0, 4250)]
)
def test_thermistor_beta_default(resistance: float, beta: int) -> None:
assert thermistor_beta({"thermistor_resistance": resistance}) == beta
def test_thermistor_beta_configured() -> None:
config = {"thermistor_resistance": 47000.0, "thermistor_beta": 3950}
assert thermistor_beta(config) == 3950
@pytest.mark.parametrize(
("resistance", "code", "beta"),
[
(None, str(NPM1300_UNSET), "0"),
(THERMISTOR_NONE, "0", "0"),
(100000.0, "3", "4250"),
],
)
def test_config_thermistor(
resistance: str | float | None, code: str, beta: str
) -> None:
config = {} if resistance is None else {"thermistor_resistance": resistance}
fields = _fields(_config(config))
assert fields["thermistor"] == code
assert fields["thermistor_beta"] == beta
@pytest.mark.parametrize(
("value", "result"),
[
("10kOhm", 10000.0),
("0.047MOhm", 47000.0),
("100000", 100000.0),
("None", "none"),
],
)
def test_thermistor_resistance(value: str, result: float | str) -> None:
assert _thermistor_resistance(value) == result
def test_thermistor_resistance_rejected() -> None:
with pytest.raises(cv.Invalid, match="10kOhm, 47kOhm, 100kOhm or none"):
_thermistor_resistance("22kOhm")
+6
View File
@@ -0,0 +1,6 @@
from tests.testing_helpers import ComponentManifestOverride
def override_manifest(manifest: ComponentManifestOverride) -> None:
# touchscreen.h includes display.h
manifest.dependencies = manifest.dependencies + ["display"]
+42
View File
@@ -0,0 +1,42 @@
#pragma once
#include <array>
#include <gtest/gtest.h>
#include "esphome/components/cst816/touchscreen/cst816_touchscreen.h"
namespace esphome::cst816::testing {
static constexpr uint8_t ADDRESS = 0x15;
// The driver reads REG_STATUS onwards in one transfer: status, gesture, touch count, then two points.
static constexpr size_t FRAME_SIZE = 13;
/// Serves one fixed status frame.
class FrameBus final : public i2c::I2CBus {
public:
explicit FrameBus(std::array<uint8_t, FRAME_SIZE> frame) : frame_(frame) {}
i2c::ErrorCode write_readv(uint8_t address, const uint8_t *write_buffer, size_t write_count, uint8_t *read_buffer,
size_t read_count) override {
EXPECT_EQ(address, ADDRESS);
for (size_t i = 0; i < read_count; i++)
read_buffer[i] = i < FRAME_SIZE ? this->frame_[i] : 0;
return i2c::ERROR_OK;
}
protected:
std::array<uint8_t, FRAME_SIZE> frame_;
};
inline std::array<uint8_t, FRAME_SIZE> make_frame(uint8_t touch_num, uint16_t x = 0, uint16_t y = 0) {
std::array<uint8_t, FRAME_SIZE> frame{};
frame[REG_TOUCH_NUM] = touch_num;
frame[REG_XPOS_HIGH] = (x >> 8) & 0x0F;
frame[REG_XPOS_LOW] = x & 0xFF;
frame[REG_YPOS_HIGH] = (y >> 8) & 0x0F;
frame[REG_YPOS_LOW] = y & 0xFF;
return frame;
}
} // namespace esphome::cst816::testing
@@ -0,0 +1,88 @@
#include <gtest/gtest.h>
#include <memory>
#include "../common.h"
namespace esphome::cst816::testing {
class CST816TouchscreenTest : public ::testing::Test {
protected:
void feed_(const std::array<uint8_t, FRAME_SIZE> &frame) {
this->bus_ = std::make_unique<FrameBus>(frame);
this->touchscreen_.set_i2c_bus(this->bus_.get());
this->touchscreen_.set_i2c_address(ADDRESS);
this->touchscreen_.update_touches();
}
std::unique_ptr<FrameBus> bus_;
CST816Touchscreen touchscreen_;
};
// An idle frame reports 0xFF in the touch count byte and 0xFFF coordinates. Masking 0xFF to the
// low two bits turns that into three touches at the maximum position, a phantom tap.
TEST_F(CST816TouchscreenTest, IdleAllOnesFrameIsIgnored) {
this->feed_(make_frame(0xFF, 0x0FFF, 0x0FFF));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
TEST_F(CST816TouchscreenTest, ZeroTouchCountIsIgnored) {
this->feed_(make_frame(0));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// Three is the boundary the guard rejects: the old mask turned a count of three into three
// touches, so this is the value whose behaviour changes.
TEST_F(CST816TouchscreenTest, TouchCountThreeIsIgnored) {
this->feed_(make_frame(3, 100, 200));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// The count is the whole low nibble, so 0x05 must not be masked down to one touch by a 0x03 mask.
TEST_F(CST816TouchscreenTest, TouchCountFiveIsIgnored) {
this->feed_(make_frame(0x05, 100, 200));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
TEST_F(CST816TouchscreenTest, SingleTouchIsReported) {
this->feed_(make_frame(1, 300, 100));
auto touches = this->touchscreen_.get_touches();
ASSERT_EQ(touches.size(), 1u);
EXPECT_EQ(touches[0].x_raw, 300);
EXPECT_EQ(touches[0].y_raw, 100);
}
// CST826/CST836 can report two points; the driver only consumes the first one.
TEST_F(CST816TouchscreenTest, TwoPointFrameReportsFirstPoint) {
this->feed_(make_frame(2, 300, 100));
auto touches = this->touchscreen_.get_touches();
ASSERT_EQ(touches.size(), 1u);
EXPECT_EQ(touches[0].x_raw, 300);
EXPECT_EQ(touches[0].y_raw, 100);
}
TEST_F(CST816TouchscreenTest, SentinelPositionIsIgnored) {
this->feed_(make_frame(1, 0x0FFF, 100));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// The sentinel is checked on both axes; a valid X with Y=0xFFF is still an idle reading.
TEST_F(CST816TouchscreenTest, SentinelYPositionIsIgnored) {
this->feed_(make_frame(1, 100, 0x0FFF));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// x_raw_max_/y_raw_max_ are calibration endpoints, not validity limits: the base class applies them
// after swapping axes and clamps readings outside them. A touch beyond the calibrated maximum is
// still a real touch and must reach the base class.
TEST_F(CST816TouchscreenTest, CalibrationBoundsDoNotDropTouches) {
this->touchscreen_.set_calibration(0, 240, 0, 320);
this->touchscreen_.set_swap_xy(true);
this->feed_(make_frame(1, 300, 100));
auto touches = this->touchscreen_.get_touches();
ASSERT_EQ(touches.size(), 1u);
EXPECT_EQ(touches[0].x_raw, 100);
EXPECT_EQ(touches[0].y_raw, 300);
}
} // namespace esphome::cst816::testing
@@ -0,0 +1,2 @@
packages:
debug: !include common.yaml
@@ -0,0 +1,2 @@
packages:
debug: !include common.yaml
+38 -22
View File
@@ -1,29 +1,38 @@
npm1300:
id: pmic
i2c_id: i2c_bus
vbus_current_limit: 500mA
thermistor_resistance: 10kOhm
thermistor_beta: 3380
charger:
charge_current: 150mA
termination_voltage: 4.2V
warm_termination_voltage: 4.0V
termination_current: 20%
trickle_voltage: 2.5V
discharge_current_limit: 1000mA
recharge: true
buck2:
voltage: 3.3V
ldo1:
voltage: 3.3V
mode: ldo
enabled: true
ldo2:
mode: load_switch
enabled: false
- id: pmic
i2c_id: i2c_bus
vbus_current_limit: 500mA
thermistor_resistance: 10kOhm
thermistor_beta: 3380
charger:
charge_current: 150mA
termination_voltage: 4.2V
warm_termination_voltage: 4.0V
termination_current: 20%
trickle_voltage: 2.5V
discharge_current_limit: 1000mA
recharge: true
buck2:
voltage: 3.3V
ldo1:
voltage: 3.3V
mode: ldo
enabled: true
ldo2:
mode: load_switch
enabled: false
# A battery without a thermistor
- id: pmic_no_ntc
i2c_id: i2c_bus
address: 0x6C
thermistor_resistance: none
charger:
termination_voltage: 3.5V
enabled: true
sensor:
- platform: npm1300
npm1300_id: pmic
battery_voltage:
name: Battery Voltage
battery_current:
@@ -41,6 +50,7 @@ sensor:
binary_sensor:
- platform: npm1300
npm1300_id: pmic
vbus_present:
name: VBUS Present
vbus_current_limit_active:
@@ -54,11 +64,13 @@ binary_sensor:
text_sensor:
- platform: npm1300
npm1300_id: pmic
charger_status:
name: Charger Status
switch:
- platform: npm1300
npm1300_id: pmic
charger:
name: Charger
buck1:
@@ -67,6 +79,10 @@ switch:
name: LDO1
ldo2:
name: LDO2
- platform: npm1300
npm1300_id: pmic_no_ntc
charger:
name: Charger Without Thermistor
button:
- platform: template
+11
View File
@@ -2,3 +2,14 @@ binary_sensor:
- platform: qwiic_pir
i2c_id: i2c_bus
name: Qwiic PIR Motion Sensor
- platform: qwiic_pir
i2c_id: i2c_bus
address: 0x13
name: Qwiic PIR Native
debounce_mode: NATIVE
debounce: 10ms
- platform: qwiic_pir
i2c_id: i2c_bus
address: 0x14
name: Qwiic PIR Raw
debounce_mode: RAW
@@ -1,4 +1,3 @@
packages:
i2c: !include ../../test_build_components/common/i2c/esp32-idf.yaml
<<: !include common.yaml
qwiic_pir: !include common.yaml
@@ -1,4 +1,3 @@
packages:
i2c: !include ../../test_build_components/common/i2c/esp8266-ard.yaml
<<: !include common.yaml
qwiic_pir: !include common.yaml
@@ -1,4 +1,3 @@
packages:
i2c: !include ../../test_build_components/common/i2c/rp2040-ard.yaml
<<: !include common.yaml
qwiic_pir: !include common.yaml
+1
View File
@@ -17,6 +17,7 @@ void setup() {
App.pre_setup(name, sizeof(name) - 1, friendly_name, sizeof(friendly_name) - 1);
auto *log = new logger::Logger(115200); // NOLINT
log->pre_setup();
log->set_uart_selection(logger::UART_SELECTION_UART0);
App.register_component_(log);
auto *wifi = new wifi::WiFiComponent(); // NOLINT
@@ -0,0 +1,39 @@
"""Each SoC variant stores preferences in the storage made for its memory."""
import pytest
from esphome.components import nrf52
from esphome.components.nrf52.const import (
VARIANT_NRF54L15,
VARIANT_NRF54LM20,
VARIANT_NRF51822,
VARIANT_NRF52832,
VARIANT_NRF52840,
)
from esphome.components.zephyr import zephyr_setup_preferences
from esphome.components.zephyr.const import KEY_PRJ_CONF, KEY_ZEPHYR
from esphome.core import CORE
@pytest.mark.parametrize(
("variant", "storage", "other"),
[
(VARIANT_NRF54L15, "ZMS", "NVS"),
(VARIANT_NRF54LM20, "ZMS", "NVS"),
(VARIANT_NRF52840, "NVS", "ZMS"),
(VARIANT_NRF52832, "NVS", "ZMS"),
(VARIANT_NRF51822, "NVS", "ZMS"),
],
)
def test_variant_picks_the_settings_backend(
variant: str, storage: str, other: str
) -> None:
CORE.data[KEY_ZEPHYR] = {KEY_PRJ_CONF: {}}
zephyr_setup_preferences(nrf52._preferences_storage(variant))
prj_conf = CORE.data[KEY_ZEPHYR][KEY_PRJ_CONF][""]
assert prj_conf[f"CONFIG_{storage}"] == (True, True)
assert prj_conf[f"CONFIG_SETTINGS_{storage}"] == (True, True)
assert f"CONFIG_{other}" not in prj_conf
assert f"CONFIG_SETTINGS_{other}" not in prj_conf
@@ -1550,6 +1550,15 @@ def test_convert_visual_temperatures(
convert_visual_temperatures({"visual": {}}, delta_keys, delta_section)
def test_convert_visual_temperatures_without_a_visual_section() -> None:
"""A platform entry that only holds nested entities has no visual section and is left alone."""
nested = {"visual": {"min_temperature": (50.0, "°F")}}
config = {"zone_1": nested}
assert convert_visual_temperatures(config, ("step",)) is config
assert nested["visual"]["min_temperature"] == (50.0, "°F")
@pytest.mark.asyncio
async def test_setup_entity_integrations_registers_mqtt_and_web_server(
monkeypatch: pytest.MonkeyPatch, setup_test_environment: list[str]
+7 -1
View File
@@ -1792,7 +1792,13 @@ def test_ccache_env_opt_in_without_binary(
# Explicit IDF_CCACHE_ENABLE=1 forces it on; without a usable binary
# IDF's CMake silently skips ccache, so this branch must say so out loud.
p1, p2, p3 = _ccache_patches(tmp_path, None, tmp_path / "build")
with patch.dict("os.environ", {"IDF_CCACHE_ENABLE": "1"}, clear=True), p1, p2, p3:
with (
patch.dict("os.environ", {"IDF_CCACHE_ENABLE": "1"}, clear=True),
patch("esphome.espidf.framework.shutil.which", return_value=None),
p1,
p2,
p3,
):
env = _ccache_env()
assert env["IDF_CCACHE_ENABLE"] == "1"
assert env["CCACHE_DIR"] == str(tmp_path / "tools" / "ccache")
+21 -1
View File
@@ -2,7 +2,11 @@
import pytest
from esphome.components.zephyr import zephyr_add_prj_conf, zephyr_add_prj_conf_min
from esphome.components.zephyr import (
zephyr_add_prj_conf,
zephyr_add_prj_conf_min,
zephyr_setup_preferences,
)
from esphome.components.zephyr.const import KEY_PRJ_CONF, KEY_ZEPHYR
from esphome.core import CORE
@@ -28,3 +32,19 @@ def test_largest_min_wins_in_any_order() -> None:
zephyr_add_prj_conf_min("MAIN_STACK_SIZE", 4096)
assert _prj_conf()["CONFIG_MAIN_STACK_SIZE"] == (8192, True)
def test_preferences_use_nvs_by_default() -> None:
zephyr_setup_preferences()
assert _prj_conf()["CONFIG_NVS"] == (True, True)
assert _prj_conf()["CONFIG_SETTINGS_NVS"] == (True, True)
assert "CONFIG_ZMS" not in _prj_conf()
def test_preferences_can_use_zms() -> None:
zephyr_setup_preferences("ZMS")
assert _prj_conf()["CONFIG_ZMS"] == (True, True)
assert _prj_conf()["CONFIG_SETTINGS_ZMS"] == (True, True)
assert "CONFIG_NVS" not in _prj_conf()