Compare commits

..
Author SHA1 Message Date
J. Nick Koston 79b3aa8e47 Inline single-use framework version locals, use the property in two test assertions 2026-11-18 12:22:11 -06:00
J. Nick Koston 77cbac2b61 [core] Read the framework version through CORE.framework_version everywhere 2026-11-18 11:48:26 -06:00
J. Nick Koston 4dca82e9c2 [libretiny] Compare the framework version directly 2026-11-18 11:46:02 -06:00
J. Nick Koston a7dffa3f2f [libretiny] Read the framework version through CORE.framework_version 2026-11-18 11:45:00 -06:00
J. Nick Koston c2e364d7bf Test that the property returns the stored version 2026-11-18 11:44:25 -06:00
J. Nick Koston 1ff447f4e6 [core] Add CORE.framework_version 2026-11-18 11:43:09 -06:00
Leandro 791d6e15ee [mqtt] Connect as soon as the network is up, not 5 s after boot (#22871) 2026-11-18 11:11:03 -06:00
J. Nick Koston d2b505e76c [bmi270] Feed the watchdog during the config upload (#22862) 2026-11-18 11:08:24 -06:00
J. Nick Koston 0cca1f8c02 [bmi270] Keep the config file in flash on ESP8266, upload it without the heap and simplify the component (#22778) 2026-11-18 11:08:23 -06:00
Martin Klingensmith 3bcd0da1f4 [uart] Accept alternate hardware UART pins on LibreTiny (#22863) 2026-11-18 10:44:53 -06:00
Martin Klingensmith 3e54c5b46d [pioneer_wt] Add Pioneer WT mini split climate component (#22865) 2026-11-18 10:24:00 -06:00
J. Nick Koston e7f7fc162b [qwiic_pir] Set a warning on read failures instead of logging every loop (#22854) 2026-11-18 07:10:30 -05:00
rwrozelle b3474a1ed5 [ci] Add a silent failure review skill (#22846) 2026-11-17 22:33:16 -06:00
Jesse Hills 69037820fa Merge branch 'beta' into dev 2026-11-18 16:07:40 +13:00
Jesse Hills 6c28ef21d9 Merge pull request #22866 from esphome/bump-2026.11.0b7
2026.11.0b7
2026-11-18 16:07:21 +13:00
Jesse Hills ab6e3d9bf0 Bump version to 2026.11.0b7 2026-11-18 15:35:39 +13:00
J. Nick Koston 10ef6e371b [i2c] Stop bus recovery clock pulses once SDA is released (#22852) 2026-11-18 15:35:35 +13:00
J. Nick Koston c84cd04cf7 [modem] Wait for registration before attaching and recover SIM7670 data mode and CMUX (#22816) 2026-11-18 15:35:35 +13:00
J. Nick Koston fb6d7bf265 [scd30] Stop overriding the I2C bus clock-stretch limit on ESP8266 (#22512) 2026-11-18 15:35:35 +13:00
David WoodhouseandJ. Nick Koston 3ad8e35be8 [mqtt] Don't start the broker lookup before the network is up (#22843)
Co-authored-by: J. Nick Koston <nick@home-assistant.io>
2026-11-18 15:35:35 +13:00
Mattheinrichs 11f9f20b61 [cst816] Ignore idle 0xFF touch frames and invalid coordinates (#22435) 2026-11-18 15:35:28 +13:00
Jacopo Labardi b6d0961f25 [logger] Qualify the host clock function (#22838) 2026-11-18 15:31:22 +13:00
David Woodhouse 6046d067aa [climate] Don't fail on a platform entry that only holds nested climates (#22844) 2026-11-18 15:30:52 +13:00
Jonathan Swoboda 690c5f2fb6 [mlx90393] Enable the Wire library on ESP32 Arduino (#22801) 2026-11-18 15:30:52 +13:00
J. Nick Koston 654954f684 [api] Make the event order backpressure test wait until the pipe is full (#22112) 2026-11-18 15:30:44 +13:00
J. Nick Koston e5728407db [i2c] Stop bus recovery clock pulses once SDA is released (#22852) 2026-11-17 18:06:32 -06:00
J. Nick Koston 0cf5af743e [modem] Wait for registration before attaching and recover SIM7670 data mode and CMUX (#22816) 2026-11-17 18:05:44 -06:00
J. Nick Koston 7ffead44fe [scd30] Stop overriding the I2C bus clock-stretch limit on ESP8266 (#22512) 2026-11-17 18:25:29 -05:00
Andriy Malyshenko f2aadcf0b5 [pcm1863] Add PCM1863 stereo audio ADC component (#22794) 2026-11-17 15:18:48 -06:00
NonaSuomy d4d53aa965 [vl6180x] Add VL6180X I2C sensor component (#22689) 2026-11-17 15:16:22 -06:00
dependabot[bot] 735ba9c98a Bump smp from 4.2.0 to 4.3.0 (#22853) 2026-11-17 14:06:09 -06:00
tomaszduda23andClaude 141789d240 [debug] Fix the debug component on nRF54L boards (#22839)
Co-authored-by: Claude <noreply@anthropic.com>
2026-11-17 17:32:52 +01:00
Bascht74 c4df1b163c [uart] Fix undefined shift in the RP2 hardware UART pin check (#22841) 2026-11-17 09:54:29 -06:00
David WoodhouseandJ. Nick Koston 773afa0bb1 [mqtt] Don't start the broker lookup before the network is up (#22843)
Co-authored-by: J. Nick Koston <nick@home-assistant.io>
2026-11-17 09:53:52 -06:00
tomaszduda23andClaude 9bf2bbc241 [nrf52] Store preferences in ZMS on nRF54L (#22840)
Co-authored-by: Claude <noreply@anthropic.com>
2026-11-17 18:21:54 +03:00
Mattheinrichs 84dea8078b [cst816] Ignore idle 0xFF touch frames and invalid coordinates (#22435) 2026-11-17 08:58:24 -06:00
Jacopo Labardi dbf6af2fd7 [logger] Qualify the host clock function (#22838) 2026-11-17 08:50:19 -06:00
David Woodhouse bc6fb7082f [climate] Don't fail on a platform entry that only holds nested climates (#22844) 2026-11-17 08:49:00 -06:00
tomaszduda23andClaude cfa27cea58 [npm1300] Fix the thermistor resistance error message (#22835)
Co-authored-by: Claude <noreply@anthropic.com>
2026-11-17 17:40:04 +03:00
rwrozelleandClaude Opus 5.5 5c061f9e1e [espidf] Hide the ccache binary in the forced-on, no-binary test (#22842)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 09:29:34 -05:00
Jesse Hills 34b24d0cf5 Merge branch 'beta' into dev 2026-11-17 22:25:16 +13:00
Jesse Hills e27614fda3 Merge pull request #22833 from esphome/bump-2026.11.0b6
2026.11.0b6
2026-11-17 22:24:55 +13:00
J. Nick Koston 8426d04138 [api] Make the event order backpressure test wait until the pipe is full (#22112) 2026-11-17 21:09:01 +13:00
641c8bedc9 [npm1300] Use datasheet defaults, require the thermistor setting for charging, fix charger status (#22769)
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: J. Nick Koston <nick@home-assistant.io>
2026-11-17 09:00:10 +01:00
Jesse Hills 4a39ca1b71 Fix 2026-11-17 20:54:40 +13:00
Jesse Hills 4a218fdbd8 Remove extra test 2026-11-17 20:47:40 +13:00
Jesse Hills d8fc1cd214 Bump version to 2026.11.0b6 2026-11-17 18:54:23 +13:00
J. Nick Koston 1e030b7371 [modem] Set the APN while the SIM is powered down (#22817) 2026-11-17 18:54:20 +13:00
J. Nick Koston 3b113f2c39 [wifi] Join the next network after a failed hidden network probe on ESP32 (#22764) 2026-11-17 18:54:20 +13:00
J. Nick Koston 73468592a9 [remote_base] Fix the Haier and Mirage remote_receiver binary sensors failing to compile 2026-11-17 18:54:06 +13:00
Jonathan Swoboda a1b456150d [esp32][libretiny] Make delay() wait at least the requested time (#22822) 2026-11-17 18:53:11 +13:00
J. Nick Koston 865a883abb [remote_base] Fix the canalsatld binary sensor and trigger build 2026-11-17 18:53:11 +13:00
J. Nick Koston 357a6717c8 [core] Release only the lwIP core lock a LwIPLock took (#22683) 2026-11-17 18:53:11 +13:00
J. Nick Koston bcb434e05e [esp32_ble] Stop Bluedroid re-running a failed queued MTU or execute write request (#22670) 2026-11-17 18:53:11 +13:00
J. Nick Koston fb65fcc5f6 [esp32_power_management] Clamp the tick step after light sleep so it cannot trip vTaskStepTick (#22637) 2026-11-17 18:53:11 +13:00
J. Nick Koston b5e379a9d4 [uart] Stop ESP8266 software serial TX from tripping the Wi-Fi watchdog at 57600 baud (#22641) 2026-11-17 18:53:11 +13:00
J. Nick Kostonandpre-commit-ci-lite[bot] 05286dfd5d [api] Send queued entity states before DisconnectRequest on shutdown (#22625)
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
2026-11-17 18:53:11 +13:00
J. Nick Koston 36184f09aa [zephyr] Count micros() in microseconds and busy-wait in delayMicroseconds() (#22612) 2026-11-17 18:53:11 +13:00
Adam Matthews 449933891e [wifi] Clear the error flag when the adapter restart is skipped (#22797) 2026-11-17 18:53:11 +13:00
Jonathan Swoboda a5bfa6dac3 [esp32_ble] Apply the Bluedroid workarounds to the ESP-IDF 6.1 releases that need them (#22806) 2026-11-17 18:53:11 +13:00
Jonathan Swoboda 5aaa5b0552 [esp32_ble] Replace Bluedroid's sscanf callers on ESP-IDF 6 too (#22805) 2026-11-17 18:53:11 +13:00
J. Nick Koston 9ab090a818 [i2c] Refuse RP2040 writes larger than the Wire buffer instead of leaving the bus stuck (#22791) 2026-11-17 18:53:10 +13:00
J. Nick Koston 02d0bb56a6 [cc1101] Refuse begin_tx in packet mode (#22636) 2026-11-16 22:21:59 -06:00
136 changed files with 5680 additions and 1343 deletions

No files matched your search

+3
View File
@@ -20,6 +20,9 @@ flagging in a review; read the matching skill for the detail behind any item.
Only raise findings that the diff actually introduces or changes. Do not ask for
drive-by cleanup of pre-existing code the PR did not touch.
For error paths that fail without telling the user (early returns, swallowed
errors, ignored results), the `silent-failure-review` skill has its own checklist.
## Scope: shared code does not ride a component PR
Check the file list first. A PR titled for one component (`[ld2450] ...`) must
@@ -0,0 +1,71 @@
---
name: silent-failure-review
description: Find code paths in a branch's diff that fail without telling the user - early returns, swallowed errors, ignored return values, half-done cleanup, and checks that are only safe under an unstated assumption. Use when asked for a silent failure review or before pushing a PR for review.
---
# Silent failure review
Report only. Do not edit files.
## Scope
The diff of the checked-out branch against its base. Fetch the base first (`git fetch upstream dev`, or
`git fetch origin dev` when there is no `upstream` remote); a stale base pulls in commits the branch only merged.
Then run `git merge-base upstream/dev HEAD` (or `origin/dev`) on its own. If it fails or prints nothing (often a
shallow clone; `git fetch --unshallow` fixes that), say the review could not run and stop; never report "no
findings" then. Diff against that commit with `git diff <base>`. The diff includes uncommitted changes but not
untracked files, so also read in full every file `git status --porcelain --untracked-files=all` lists as `??`.
Use another branch only if the user names one. If neither remote exists, say so and stop. Read each changed
function in full, and its callers, not just the hunks. When a failure depends on how a library call behaves,
read that library's code too.
## What to look for
1. **Early returns and skips:** a `return` or `continue` taken before a check or a fetch. Name the assumption
it relies on and the case that breaks it (a later release, a lost file, an older install).
2. **Swallowed errors:** `except` that logs, passes or returns a default; `OSError` tolerated where the next
step needs the file. In C++: an error code mapped to a default, or a status flag that is never set.
3. **Ignored results:** a `False`, `None`, exit code, `bool` or `ErrorCode` that the caller does not check.
4. **Half-done state:** a failure between two writes that leaves a marker, stamp, lock or filter saying
something is done when it is not; cleanup missing on an error path.
5. **Stale stored state:** markers, stamps or saved preferences (NVS, flash) written by an older version that
the new code trusts.
6. **Unclear late failure:** an error that surfaces later (CMake, compile, boot) instead of where it starts,
with a message that does not point back to the cause.
7. **Defaults standing in for errors:** `x or default`, `.get(key, default)` or an empty object takes the
place of a value that is missing or could not be read, and the code carries on as if it were real.
8. **Unwatched work:** a thread, task or subprocess is started and nothing ever looks at how it ended.
9. **Wrong value on an error branch:** the error is detected, but the branch returns success, `None` or the
wrong code instead of passing it on.
10. **State reset or skipped:** for each counter, flag, retry or timeout the diff adds or changes, find every
place that writes it, and check that no path resets or skips it before it can do its job.
11. **Boundaries:** length and buffer comparisons (`>=` against `>`, `len` against `len + 1`), the exact-fit
case and the empty case.
12. **Unjudged results:** a test or script that prints a result but never fails on it.
Moved code counts too: if the original had the same flaw, say so, but still report it. Report only flaws in
changed or moved lines; unchanged callers are context. If the branch has an open PR (`gh pr view --json number`
finds it), read its reviews (`gh pr view <n> --comments` and
`gh api --paginate repos/esphome/esphome/pulls/<n>/comments`) and skip what they already raised.
Before reporting a candidate, follow it to the line that proves it and quote that line. If you cannot
confirm it, drop it or mark it as likely.
## Skip
- Code that ignores a failure and has a comment explaining why.
- Tests that provoke an error and check for it.
- Optional tidy-up steps (removing a temp file, say) that may fail with only a log line.
## Report
One entry per finding, most severe first:
- **HIGH / MEDIUM / LOW** - one-line title, `file:line`. HIGH: wrong result or lost data. MEDIUM: a
misleading or delayed failure. LOW: affects only logs or diagnostics.
- **Confidence:** confirmed, or likely and why it could not be confirmed.
- **Risk:** the concrete input or state, and what the user sees.
- **Fix:** the smallest change.
- **Test:** the test that fails before the fix, or for on-device code, the steps to reproduce it on a board.
No findings: say so in one line. Keep the report short; no summary of what the PR does.
+2
View File
@@ -66,6 +66,8 @@ file does, and it is the authority when they disagree. The most useful starting
* `breaking-changes`: what is public API, deprecation patterns and migration notes.
* `pr-workflow`, `code-review`, `hardware-test`, `display-test`: creating PRs, reviewing them, and testing
on real boards and panels.
* `silent-failure-review`: code paths in a branch's diff that fail without telling the user, checked
before a PR goes up for review.
* **Formatting:**
* **Python:** Uses `ruff` for linting and formatting. Configuration is in `pyproject.toml`.
+3
View File
@@ -489,10 +489,12 @@ esphome/components/pca9505/* @ajfriesen @ssieb
esphome/components/pca9554/* @bdraco @clydebarrow @hwstar
esphome/components/pcf85063/* @brogon
esphome/components/pcf8563/* @KoenBreeman
esphome/components/pcm1863/* @anabolyc
esphome/components/pcm5122/* @remcom
esphome/components/pd_pioneer_ir/* @martinsah
esphome/components/pi4ioe5v6408/* @jesserockz
esphome/components/pid/* @OttoWinter
esphome/components/pioneer_wt/* @martinsah
esphome/components/pipsolar/* @andreashergert1984
esphome/components/pixoo/* @jesserockz
esphome/components/pm1006/* @habbie
@@ -735,6 +737,7 @@ esphome/components/veml7700/* @latonita
esphome/components/version/* @esphome/core
esphome/components/vevor_dtx/* @Bofr5555
esphome/components/vl53l1x/* @will-tm
esphome/components/vl6180x/* @NonaSuomy
esphome/components/vnc/* @MindFreeze
esphome/components/voice_assistant/* @jesserockz @kahrendt
esphome/components/wake_on_lan/* @clydebarrow @willwill2will54
+2 -7
View File
@@ -10,12 +10,7 @@ from typing import TYPE_CHECKING
from esphome.build_helpers.ccache import resolve_absolute_ccache_path
from esphome.build_helpers.native import warn_ignored_platformio_options
from esphome.build_helpers.ninja import refresh_compile_commands
from esphome.const import (
CONF_COMPILE_PROCESS_LIMIT,
CONF_ESPHOME,
KEY_CORE,
KEY_FRAMEWORK_VERSION,
)
from esphome.const import CONF_COMPILE_PROCESS_LIMIT, CONF_ESPHOME
from esphome.core import CORE
from esphome.types import ConfigType
@@ -73,7 +68,7 @@ def run_compile(config: ConfigType, verbose: bool) -> int:
from esphome.core.config import NATIVE_ARDUINO_CONSUMED_PIO_OPTIONS
warn_ignored_platformio_options(NATIVE_ARDUINO_CONSUMED_PIO_OPTIONS)
paths = framework.check_and_install(CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION])
paths = framework.check_and_install(CORE.framework_version)
# Resolved once: the probe is not free and three consumers need it
ccache = resolve_absolute_ccache_path()
ninja_changed = build_gen.write_project(paths, ccache)
+1 -3
View File
@@ -36,8 +36,6 @@ from esphome.const import (
CONF_ESPHOME,
CONF_ID,
CONF_PLATFORMIO_OPTIONS,
KEY_CORE,
KEY_FRAMEWORK_VERSION,
)
from esphome.core import CORE, EsphomeError
import esphome.final_validate as fv
@@ -128,7 +126,7 @@ def _final_validate(config: ConfigType) -> None:
_LOGGER.warning("%s (this configuration cannot compile)", msg)
options = fv.full_config.get()[CONF_ESPHOME].get(CONF_PLATFORMIO_OPTIONS) or {}
check_bdk_version(options.get(BEKEN_BDK_VERSION_OPTION))
check_libretiny_version(CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION])
check_libretiny_version(CORE.framework_version)
FINAL_VALIDATE_SCHEMA = _final_validate
+70 -136
View File
@@ -1,5 +1,6 @@
#include "bmi270.h"
#include "bmi270_config.h"
#include "esphome/core/application.h"
#include "esphome/core/log.h"
#include "esphome/core/hal.h"
#include "esphome/core/progmem.h"
@@ -21,48 +22,40 @@ static constexpr size_t MAX_I2C_BUFFER_SIZE = 32;
static constexpr size_t MAX_I2C_BUFFER_SIZE = 256;
#endif
// Configuration blob upload
// The BMI270 requires a firmware config blob to be written to its internal
// memory after every power-on before sensors can be used.
bool BMI270Component::load_config_file_() {
// 1. Disable advanced power-save so the config port is accessible
// The config port is only reachable with advanced power save off
if (!this->write_byte(BMI270_REG_PWR_CONF, BMI270_PWR_CONF_ADV_POWER_SAVE_OFF))
return false;
delay(1);
// 2. Prepare config load: write 0x00 to INIT_CTRL to start
if (!this->write_byte(BMI270_REG_INIT_CTRL, BMI270_INIT_CTRL_LOAD_START))
return false;
// 3. Burst-write the config in pages
const uint8_t *cfg = BMI270_CONFIG_FILE;
constexpr size_t cfg_len = sizeof(BMI270_CONFIG_FILE);
// The register byte goes first, so each burst is copied once and sent with write()
uint8_t buf[1 + MAX_I2C_BUFFER_SIZE];
buf[0] = BMI270_REG_INIT_DATA;
size_t index = 0;
while (index != cfg_len) {
// Set the page address in INIT_ADDR registers
uint8_t addr_lsb = (uint8_t) ((index / 2) & 0x0F);
uint8_t addr_msb = (uint8_t) ((index / 2) >> 4);
if (!this->write_byte(BMI270_REG_INIT_ADDR_0, addr_lsb))
return false;
if (!this->write_byte(BMI270_REG_INIT_ADDR_0 + 1, addr_msb))
// INIT_ADDR_0 takes the word address bits 0-3 and INIT_ADDR_1 bits 4-11
const uint8_t addr[2] = {static_cast<uint8_t>((index / 2) & 0x0F), static_cast<uint8_t>((index / 2) >> 4)};
if (this->write_register(BMI270_REG_INIT_ADDR_0, addr, sizeof(addr)) != i2c::ERROR_OK)
return false;
// Write a burst of up to the maximum allowed size
size_t burst = clamp_at_most(cfg_len - index, MAX_I2C_BUFFER_SIZE);
if (this->write_register(BMI270_REG_INIT_DATA, cfg + index, burst) != i2c::ERROR_OK)
progmem_memcpy(buf + 1, BMI270_CONFIG_FILE + index, burst);
if (this->write(buf, burst + 1) != i2c::ERROR_OK)
return false;
index += burst;
// 256 bursts at 50 kHz, or through an I2C multiplexer, outlast the ESP8266 soft watchdog
App.feed_wdt();
}
// 4. Signal end of config load
if (!this->write_byte(BMI270_REG_INIT_CTRL, BMI270_INIT_CTRL_LOAD_DONE))
return false;
delay(20); // spec: wait ≥20 ms for init to complete
delay(20); // The datasheet asks for at least 20 ms before INTERNAL_STATUS is valid
// 5. Check INTERNAL_STATUS: bit[0:3] should be 0x01 ("initialisation OK")
uint8_t status = 0;
if (!this->read_byte(BMI270_REG_INTERNAL_STATUS, &status))
return false;
@@ -73,74 +66,52 @@ bool BMI270Component::load_config_file_() {
return true;
}
// setup() ─
void BMI270Component::setup() {
MotionComponent::setup();
// 1. Verify chip ID
if (!this->check_chip_id(this, BMI270_REG_CHIP_ID, BMI270_CHIP_ID_VALUE))
return;
// 2. Soft-reset via CMD register (0x7E = 0xB6)
if (!this->setup_check(this->write_byte(BMI270_REG_CMD, BMI270_CMD_SOFT_RESET)))
return;
delay(20);
// 4. Upload the configuration blob
if (!this->setup_check(load_config_file_(), LOG_STR("Config file upload failed")))
return;
ESP_LOGD(TAG, "Config blob uploaded ✓");
// 5. Configure accelerometer
// ACC_CONF: ODR | BWP(0x2 = normal avg4) | perf_mode(1)
uint8_t acc_conf =
(uint8_t) (accel_odr_) | (BMI270_CONF_BWP_NORMAL << BMI270_CONF_BWP_SHIFT) | BMI270_ACC_CONF_PERF_MODE;
if (!this->setup_check(this->write_byte(BMI270_REG_ACC_CONF, acc_conf)))
return;
if (!this->setup_check(this->write_byte(BMI270_REG_ACC_RANGE, (uint8_t) accel_range_)))
if (!this->setup_check(this->load_config_file_(), LOG_STR("Config file upload failed")))
return;
// 6. Configure gyroscope
// GYR_CONF: ODR | BWP(0x2 = normal) | noise_perf(1) | filter_perf(1)
uint8_t gyr_conf = (uint8_t) (gyro_odr_) | (BMI270_CONF_BWP_NORMAL << BMI270_CONF_BWP_SHIFT) |
BMI270_GYR_CONF_NOISE_PERF | BMI270_GYR_CONF_FILTER_PERF;
if (!this->setup_check(this->write_byte(BMI270_REG_GYR_CONF, gyr_conf)))
return;
if (!this->setup_check(this->write_byte(BMI270_REG_GYR_RANGE, (uint8_t) gyro_range_)))
return;
// 7. Enable accelerometer, gyroscope, and temperature sensor
// PWR_CTRL bits: temp_en[3] | gyr_en[2] | acc_en[1]
if (!this->setup_check(this->write_byte(BMI270_REG_PWR_CTRL, BMI270_PWR_CTRL_IMU)))
// Normal filter bandwidth; performance mode for the accelerometer, noise and filter performance for the gyroscope
const uint8_t acc_conf =
this->accel_odr_ | (BMI270_CONF_BWP_NORMAL << BMI270_CONF_BWP_SHIFT) | BMI270_ACC_CONF_PERF_MODE;
const uint8_t gyr_conf = this->gyro_odr_ | (BMI270_CONF_BWP_NORMAL << BMI270_CONF_BWP_SHIFT) |
BMI270_GYR_CONF_NOISE_PERF | BMI270_GYR_CONF_FILTER_PERF;
if (!this->setup_check(this->write_byte(BMI270_REG_ACC_CONF, acc_conf) &&
this->write_byte(BMI270_REG_ACC_RANGE, this->accel_range_) &&
this->write_byte(BMI270_REG_GYR_CONF, gyr_conf) &&
this->write_byte(BMI270_REG_GYR_RANGE, this->gyro_range_) &&
this->write_byte(BMI270_REG_PWR_CTRL, BMI270_PWR_CTRL_IMU)))
return;
delay(5);
// 8. Re-enable advanced power save (optional; keeps current low between reads)
// Disabled here for simplicity – leave in performance mode
// bit1 = fifo_self_wakeup
// Advanced power save stays off; FIFO self-wakeup on
if (!this->setup_check(this->write_byte(BMI270_REG_PWR_CONF, BMI270_PWR_CONF_FIFO_SELF_WAKEUP)))
return;
// 9. Optionally bring up whatever is wired to the aux interface.
// This is entirely additive: it is off by default, and failure only disables
// magnetometer reporting rather than the whole component.
#ifdef USE_BMI270_BMM150
// A missing magnetometer only disables magnetometer reporting
if (this->aux_device_ == BMI270_AUX_DEVICE_BMM150) {
this->magnetometer_ready_ = this->setup_magnetometer_();
const LogString *failed_step = this->setup_magnetometer_();
this->magnetometer_ready_ = failed_step == nullptr;
if (!this->magnetometer_ready_) {
ESP_LOGW(TAG, "BMM150 magnetometer setup failed; continuing without it");
ESP_LOGW(TAG, "BMM150 magnetometer setup failed at %s; continuing without it", LOG_STR_ARG(failed_step));
}
}
#endif
ESP_LOGCONFIG(TAG, "BMI270 initialised successfully");
}
#ifdef USE_BMI270_BMM150
bool BMI270Component::wait_for_aux_idle_(uint32_t timeout_ms) {
// The STATUS aux-busy bit is set while an aux transaction is in flight. Aux transaction
// duration depends on the attached device's own timing, so poll with a bounded
// timeout instead of guessing a fixed delay.
static_assert(BMM150_TRIM_BLOCK_LEN == BMI270_AUX_DATA_LEN, "each trim block is one aux read");
bool BMI270Component::wait_for_aux_idle_() {
static constexpr uint32_t AUX_IDLE_TIMEOUT_MS = 20;
uint32_t start = millis();
while (true) {
uint8_t status = 0;
@@ -148,98 +119,63 @@ bool BMI270Component::wait_for_aux_idle_(uint32_t timeout_ms) {
return false;
if ((status & BMI270_STATUS_AUX_BUSY) == 0)
return true;
if (millis() - start >= timeout_ms)
if (millis() - start >= AUX_IDLE_TIMEOUT_MS)
return false;
delay(1);
}
}
bool BMI270Component::write_aux_register_(uint8_t reg, uint8_t value) {
if (!this->write_byte(BMI270_REG_AUX_WR_DATA, value))
return false;
if (!this->write_byte(BMI270_REG_AUX_WR_ADDR, reg))
return false;
return this->wait_for_aux_idle_(20);
return this->write_byte(BMI270_REG_AUX_WR_DATA, value) && this->write_byte(BMI270_REG_AUX_WR_ADDR, reg) &&
this->wait_for_aux_idle_();
}
bool BMI270Component::read_aux_block_(uint8_t reg, uint8_t *buf) {
if (!this->write_byte(BMI270_REG_AUX_RD_ADDR, reg))
return false;
if (!this->wait_for_aux_idle_(20))
return false;
return this->read_bytes(BMI270_REG_AUX_X_LSB, buf, BMI270_AUX_DATA_LEN);
return this->write_byte(BMI270_REG_AUX_RD_ADDR, reg) && this->wait_for_aux_idle_() &&
this->read_bytes(BMI270_REG_AUX_X_LSB, buf, BMI270_AUX_DATA_LEN);
}
bool BMI270Component::read_magnetometer_trim_() {
uint8_t regs[BMM150_TRIM_BLOCKS * BMM150_TRIM_BLOCK_LEN];
for (uint8_t i = 0; i < BMM150_TRIM_BLOCKS; i++) {
if (!this->read_aux_block_(BMM150_REG_TRIM_START + i * BMM150_TRIM_BLOCK_LEN, regs + i * BMM150_TRIM_BLOCK_LEN))
return false;
}
this->mag_trim_ = bmm150_parse_trim(regs);
return true;
}
bool BMI270Component::setup_magnetometer_() {
// Sequence adapted from the Bosch BMI270 aux-interface protocol: enable the secondary
// I2C master in manual mode, point it at the BMM150's address, power the BMM150 up
// and soft-reset it, verify its chip ID, read its factory trim values, put it in
// normal/30Hz mode, then switch the aux interface to auto-burst mode so BMI270 keeps
// AUX_X/Y/Z/R refreshed from the BMM150's data registers.
ESP_LOGD(TAG, "Setting up BMM150 magnetometer via BMI270 aux interface...");
if (!this->write_byte(BMI270_REG_IF_CONF, BMI270_IF_CONF_AUX_IF_EN))
return false;
if (!this->write_byte(BMI270_REG_AUX_IF_CONF, BMI270_AUX_IF_CONF_MANUAL_EN | BMI270_AUX_IF_CONF_MAN_RD_BURST_8))
return false;
if (!this->write_byte(BMI270_REG_AUX_DEV_ID, (uint8_t) (this->aux_device_address_ << 1)))
return false;
// Follows the Bosch BMI270 aux-interface sequence; ends in auto-burst mode, where the BMI270 keeps
// AUX_X/Y/Z/R filled from the BMM150's data registers
const LogString *BMI270Component::setup_magnetometer_() {
if (!(this->write_byte(BMI270_REG_IF_CONF, BMI270_IF_CONF_AUX_IF_EN) &&
this->write_byte(BMI270_REG_AUX_IF_CONF, BMI270_AUX_IF_CONF_MANUAL_EN | BMI270_AUX_IF_CONF_MAN_RD_BURST_8) &&
this->write_byte(BMI270_REG_AUX_DEV_ID, this->aux_device_address_ << 1)))
return LOG_STR("aux interface");
// Suspend -> sleep, then a soft reset so the BMM150 starts from a known state even if it
// stayed powered across a restart. The chip ID is only readable once the power bit is set.
if (!this->write_aux_register_(BMM150_REG_POWER_CONTROL, BMM150_CMD_POWER_ON)) {
ESP_LOGW(TAG, "BMM150 power-on write timed out");
return false;
}
if (!this->write_aux_register_(BMM150_REG_POWER_CONTROL, BMM150_CMD_POWER_ON))
return LOG_STR("power-on");
delay(BMM150_START_UP_TIME_MS);
if (!this->write_aux_register_(BMM150_REG_POWER_CONTROL, BMM150_CMD_SOFT_RESET)) {
ESP_LOGW(TAG, "BMM150 soft-reset write timed out");
return false;
}
if (!this->write_aux_register_(BMM150_REG_POWER_CONTROL, BMM150_CMD_SOFT_RESET))
return LOG_STR("soft reset");
delay(BMM150_SOFT_RESET_TIME_MS);
uint8_t chip_id[BMI270_AUX_DATA_LEN];
if (!this->read_aux_block_(BMM150_REG_CHIP_ID, chip_id)) {
ESP_LOGW(TAG, "BMM150 chip-ID read failed");
return false;
}
if (!this->read_aux_block_(BMM150_REG_CHIP_ID, chip_id))
return LOG_STR("chip ID read");
if (chip_id[0] != BMM150_CHIP_ID_VALUE) {
ESP_LOGW(TAG, "BMM150 not detected (chip ID 0x%02X, expected 0x%02X)", chip_id[0], BMM150_CHIP_ID_VALUE);
return false;
ESP_LOGW(TAG, "BMM150 chip ID 0x%02X, expected 0x%02X", chip_id[0], BMM150_CHIP_ID_VALUE);
return LOG_STR("chip ID check");
}
if (!this->read_magnetometer_trim_()) {
ESP_LOGW(TAG, "BMM150 trim data read failed");
return false;
uint8_t trim[BMM150_TRIM_BLOCKS * BMM150_TRIM_BLOCK_LEN];
for (uint8_t i = 0; i < BMM150_TRIM_BLOCKS; i++) {
if (!this->read_aux_block_(BMM150_REG_TRIM_START + i * BMM150_TRIM_BLOCK_LEN, trim + i * BMM150_TRIM_BLOCK_LEN))
return LOG_STR("trim read");
}
this->mag_trim_ = bmm150_parse_trim(trim);
if (!this->write_aux_register_(BMM150_REG_OP_MODE, BMM150_CMD_NORMAL_MODE_ODR_30HZ)) {
ESP_LOGW(TAG, "BMM150 mode write timed out");
return false;
}
if (!this->write_aux_register_(BMM150_REG_OP_MODE, BMM150_CMD_NORMAL_MODE_ODR_30HZ))
return LOG_STR("normal mode");
// Switch to auto-burst mode: BMI270 will keep polling 8 bytes from the BMM150's
// data registers (0x42) into its own AUX_X/Y/Z/R registers automatically.
if (!this->write_byte(BMI270_REG_AUX_IF_CONF, BMI270_AUX_IF_CONF_FCU_WRITE_EN | BMI270_AUX_IF_CONF_MAN_RD_BURST_8 |
BMI270_AUX_IF_CONF_RD_BURST_8))
return false;
if (!this->write_byte(BMI270_REG_AUX_RD_ADDR, BMM150_REG_DATA_X_LSB))
return false;
if (!this->write_byte(BMI270_REG_PWR_CTRL, BMI270_PWR_CTRL_IMU | BMI270_PWR_CTRL_AUX_EN))
return false;
ESP_LOGD(TAG, "BMM150 magnetometer ready");
return true;
if (!(this->write_byte(BMI270_REG_AUX_IF_CONF, BMI270_AUX_IF_CONF_FCU_WRITE_EN | BMI270_AUX_IF_CONF_MAN_RD_BURST_8 |
BMI270_AUX_IF_CONF_RD_BURST_8) &&
this->write_byte(BMI270_REG_AUX_RD_ADDR, BMM150_REG_DATA_X_LSB) &&
this->write_byte(BMI270_REG_PWR_CTRL, BMI270_PWR_CTRL_IMU | BMI270_PWR_CTRL_AUX_EN)))
return LOG_STR("auto-burst mode");
return nullptr;
}
#endif // USE_BMI270_BMM150
@@ -249,9 +185,10 @@ void BMI270Component::dump_config() {
if (this->is_failed())
return;
ESP_LOGCONFIG(TAG, " Accel range : %s",
LOG_STR_ARG(AccelRangeStrings::get_log_str(this->accel_range_, AccelRangeStrings::LAST_INDEX)));
ESP_LOGCONFIG(TAG, " Gyro range : %s",
ESP_LOGCONFIG(TAG,
" Accel range : %s\n"
" Gyro range : %s",
LOG_STR_ARG(AccelRangeStrings::get_log_str(this->accel_range_, AccelRangeStrings::LAST_INDEX)),
LOG_STR_ARG(GyroRangeStrings::get_log_str(this->gyro_range_, GyroRangeStrings::LAST_INDEX)));
#ifdef USE_BMI270_BMM150
if (this->aux_device_ == BMI270_AUX_DEVICE_BMM150) {
@@ -262,9 +199,6 @@ void BMI270Component::dump_config() {
MotionComponent::dump_config();
}
// update() ─
// Reads all 6 axes + temperature in one block
bool BMI270Component::update_data(motion::MotionData &data) {
if (this->is_failed())
return false;
+8 -24
View File
@@ -12,18 +12,15 @@
namespace esphome::bmi270 {
// Register map
static constexpr uint8_t BMI270_REG_CHIP_ID = 0x00;
static constexpr uint8_t BMI270_REG_ERR_REG = 0x02;
static constexpr uint8_t BMI270_REG_STATUS = 0x03;
static constexpr uint8_t BMI270_REG_DATA_8 = 0x0C; // ACC_X LSB
static constexpr uint8_t BMI270_REG_DATA_14 = 0x12; // GYR_X LSB
static constexpr uint8_t BMI270_REG_TEMP_0 = 0x22;
static constexpr uint8_t BMI270_REG_TEMP_MSB = 0x23; // temperature (2 bytes big-endian ish)
static constexpr uint8_t BMI270_REG_TEMP_MSB = 0x23;
static constexpr uint8_t REG_READ_LEN =
BMI270_REG_TEMP_MSB - BMI270_REG_DATA_8 +
1; // 0x23 - 0x0C + 1 = 0x18 bytes total for accel(6) + gyro(6) + temp(2) + padding(4)
// Accel, gyro, 10 unused bytes, then temperature: 0x0C to 0x23
static constexpr uint8_t REG_READ_LEN = BMI270_REG_TEMP_MSB - BMI270_REG_DATA_8 + 1;
static constexpr uint8_t BMI270_REG_PWR_CONF = 0x7C;
static constexpr uint8_t BMI270_REG_PWR_CTRL = 0x7D;
@@ -80,7 +77,6 @@ static constexpr uint8_t BMI270_AUX_IF_CONF_RD_BURST_8 = 0x03; // bits 1:0
static constexpr uint8_t BMI270_AUX_DATA_LEN = 8;
static_assert(BMI270_REG_AUX_X_LSB + BMI270_AUX_DATA_LEN == BMI270_REG_DATA_8, "aux data must precede accel data");
// Accelerometer range options
enum BMI270AccelRange : uint8_t {
BMI270_ACCEL_RANGE_2G = 0x00,
BMI270_ACCEL_RANGE_4G = 0x01,
@@ -88,7 +84,6 @@ enum BMI270AccelRange : uint8_t {
BMI270_ACCEL_RANGE_16G = 0x03,
};
// Accelerometer ODR options
enum BMI270AccelODR : uint8_t {
BMI270_ACCEL_ODR_12_5 = 0x05,
BMI270_ACCEL_ODR_25 = 0x06,
@@ -100,7 +95,6 @@ enum BMI270AccelODR : uint8_t {
BMI270_ACCEL_ODR_1600 = 0x0C,
};
// Gyroscope range options
enum BMI270GyroRange : uint8_t {
BMI270_GYRO_RANGE_2000 = 0x00,
BMI270_GYRO_RANGE_1000 = 0x01,
@@ -109,7 +103,6 @@ enum BMI270GyroRange : uint8_t {
BMI270_GYRO_RANGE_125 = 0x04,
};
// Gyroscope ODR options
enum BMI270GyroODR : uint8_t {
BMI270_GYRO_ODR_25 = 0x06,
BMI270_GYRO_ODR_50 = 0x07,
@@ -130,14 +123,11 @@ enum BMI270AuxDevice : uint8_t {
};
#endif
// Main component class
class BMI270Component final : public motion::MotionComponent, public i2c::I2CDevice {
public:
// Lifecycle
void setup() override;
void dump_config() override;
// Configuration setters
void set_accel_range(BMI270AccelRange r) { this->accel_range_ = r; }
void set_accel_odr(BMI270AccelODR o) { this->accel_odr_ = o; }
void set_gyro_range(BMI270GyroRange r) { this->gyro_range_ = r; }
@@ -153,21 +143,15 @@ class BMI270Component final : public motion::MotionComponent, public i2c::I2CDev
bool update_data(motion::MotionData &data) override;
bool load_config_file_();
#ifdef USE_BMI270_BMM150
// Brings up the BMM150 over the BMI270's aux interface. Optional: on failure this only
// disables magnetometer reporting, it does not fail the whole component (accel/gyro still work).
bool setup_magnetometer_();
// Blocking poll of the aux-transaction-busy bit; aux transaction time depends on the
// attached device, so this is bounded by retries/timeout rather than a fixed delay.
bool wait_for_aux_idle_(uint32_t timeout_ms);
// Manual-mode aux read of 8 bytes starting at `reg` on the aux device.
// Returns the step that failed, or nullptr once the BMM150 is running
const LogString *setup_magnetometer_();
// Polls the aux busy bit, as the aux transaction time depends on the attached device
bool wait_for_aux_idle_();
// Manual-mode aux read of 8 bytes starting at `reg` on the aux device
bool read_aux_block_(uint8_t reg, uint8_t *buf);
// Manual-mode aux write of one byte to `reg` on the aux device.
bool write_aux_register_(uint8_t reg, uint8_t value);
// Reads the BMM150 factory trim values used to compensate its samples.
bool read_magnetometer_trim_();
#endif
// Config
BMI270AccelRange accel_range_{BMI270_ACCEL_RANGE_4G};
BMI270AccelODR accel_odr_{BMI270_ACCEL_ODR_100};
BMI270GyroRange gyro_range_{BMI270_GYRO_RANGE_2000};
+2 -1
View File
@@ -1,5 +1,6 @@
#pragma once
#include <cstdint>
#include "esphome/core/hal.h"
namespace esphome::bmi270 {
@@ -44,7 +45,7 @@ POSSIBILITY OF SUCH DAMAGE.
after every power cycle, before any sensor data can be read.
--------------------------------------------------------------------------- */
static constexpr uint8_t BMI270_CONFIG_FILE[] = {
static constexpr uint8_t BMI270_CONFIG_FILE[] PROGMEM = {
0xc8, 0x2e, 0x00, 0x2e, 0x80, 0x2e, 0x3d, 0xb1, 0xc8, 0x2e, 0x00, 0x2e, 0x80, 0x2e, 0x91, 0x03, 0x80, 0x2e, 0xbc,
0xb0, 0x80, 0x2e, 0xa3, 0x03, 0xc8, 0x2e, 0x00, 0x2e, 0x80, 0x2e, 0x00, 0xb0, 0x50, 0x30, 0x21, 0x2e, 0x59, 0xf5,
0x10, 0x30, 0x21, 0x2e, 0x6a, 0xf5, 0x80, 0x2e, 0x3b, 0x03, 0x00, 0x00, 0x00, 0x00, 0x08, 0x19, 0x01, 0x00, 0x22,
+16 -16
View File
@@ -3,11 +3,8 @@
#include <cstdint>
#include "esphome/core/helpers.h"
// BMM150 magnetometer definitions - the chip that can optionally be wired to the BMI270's
// auxiliary (secondary I2C master) interface. Lives in its own header/namespace because this
// is BMM150-specific driver knowledge, not BMI270 knowledge - it just can't be a standalone
// ESPHome component, since the BMM150 has no address of its own on the main I2C bus and is only
// reachable by having the BMI270 proxy register reads/writes through its aux interface.
// BMM150 magnetometer behind the BMI270's aux interface; it is not on the main I2C bus, so it is not
// its own component
namespace esphome::bmi270::bmm150 {
static constexpr uint8_t BMM150_DEFAULT_I2C_ADDRESS = 0x10;
@@ -64,20 +61,23 @@ inline uint16_t bmm150_trim_word(const uint8_t *regs, uint8_t reg) {
return encode_value_le<uint16_t>(&regs[offset]);
}
// A trim byte, addressed by its register
inline uint8_t bmm150_trim_byte(const uint8_t *regs, uint8_t reg) { return regs[reg - BMM150_REG_TRIM_START]; }
// Decodes the trim registers; `regs` holds the bytes of registers 0x5D onwards (at least 21).
inline BMM150Trim bmm150_parse_trim(const uint8_t *regs) {
BMM150Trim trim;
trim.x1 = static_cast<int8_t>(regs[BMM150_TRIM_X1 - BMM150_REG_TRIM_START]);
trim.y1 = static_cast<int8_t>(regs[BMM150_TRIM_Y1 - BMM150_REG_TRIM_START]);
trim.x1 = static_cast<int8_t>(bmm150_trim_byte(regs, BMM150_TRIM_X1));
trim.y1 = static_cast<int8_t>(bmm150_trim_byte(regs, BMM150_TRIM_Y1));
trim.z4 = static_cast<int16_t>(bmm150_trim_word(regs, BMM150_TRIM_Z4));
trim.x2 = static_cast<int8_t>(regs[BMM150_TRIM_X2 - BMM150_REG_TRIM_START]);
trim.y2 = static_cast<int8_t>(regs[BMM150_TRIM_Y2 - BMM150_REG_TRIM_START]);
trim.x2 = static_cast<int8_t>(bmm150_trim_byte(regs, BMM150_TRIM_X2));
trim.y2 = static_cast<int8_t>(bmm150_trim_byte(regs, BMM150_TRIM_Y2));
trim.z2 = static_cast<int16_t>(bmm150_trim_word(regs, BMM150_TRIM_Z2));
trim.z1 = bmm150_trim_word(regs, BMM150_TRIM_Z1);
trim.xyz1 = bmm150_trim_word(regs, BMM150_TRIM_XYZ1) & BMM150_TRIM_XYZ1_MASK;
trim.z3 = static_cast<int16_t>(bmm150_trim_word(regs, BMM150_TRIM_Z3));
trim.xy2 = static_cast<int8_t>(regs[BMM150_TRIM_XY2 - BMM150_REG_TRIM_START]);
trim.xy1 = regs[BMM150_TRIM_XY1 - BMM150_REG_TRIM_START];
trim.xy2 = static_cast<int8_t>(bmm150_trim_byte(regs, BMM150_TRIM_XY2));
trim.xy1 = bmm150_trim_byte(regs, BMM150_TRIM_XY1);
return trim;
}
@@ -108,11 +108,11 @@ inline float bmm150_compensate_z(const BMM150Trim &trim, int16_t raw, uint16_t r
// Converts 8 raw bytes from the BMM150 data registers (X, Y, Z, RHALL; 0x42-0x49) to compensated µT.
inline BMM150Data bmm150_convert(const BMM150Trim &trim, const uint8_t *raw) {
// X/Y are 13-bit (LSB byte bits 7:3), Z is 15-bit (bits 7:1), RHALL is 14-bit (bits 7:2).
int16_t x = (int16_t) (((int16_t) (int8_t) raw[1] * 32) | (raw[0] >> 3));
int16_t y = (int16_t) (((int16_t) (int8_t) raw[3] * 32) | (raw[2] >> 3));
int16_t z = (int16_t) (((int16_t) (int8_t) raw[5] * 128) | (raw[4] >> 1));
uint16_t rhall = (uint16_t) (((uint16_t) raw[7] << 6) | (raw[6] >> 2));
// Left-aligned in their 16-bit words: X/Y are 13-bit, Z is 15-bit, RHALL is 14-bit
const int16_t x = encode_value_le<int16_t>(&raw[0]) >> 3;
const int16_t y = encode_value_le<int16_t>(&raw[2]) >> 3;
const int16_t z = encode_value_le<int16_t>(&raw[4]) >> 1;
const uint16_t rhall = encode_value_le<uint16_t>(&raw[6]) >> 2;
return BMM150Data{
.x = bmm150_compensate_xy(trim, trim.x1, trim.x2, x, rhall),
.y = bmm150_compensate_xy(trim, trim.y1, trim.y2, y, rhall),
+28 -21
View File
@@ -17,6 +17,14 @@ DEPENDENCIES = ["i2c"]
CONF_AUX_ADDRESS = "aux_address"
CONF_AUX_DEVICE = "aux_device"
# to_code skips the setters at these values, so each must match its member default in bmi270.h
DEFAULT_ACCELEROMETER_RANGE = "4G"
DEFAULT_ACCELEROMETER_ODR = "100HZ"
DEFAULT_GYROSCOPE_RANGE = "2000DPS"
DEFAULT_GYROSCOPE_ODR = "200HZ"
# The BMM150's fixed address
DEFAULT_AUX_ADDRESS = 0x10
# Enum proxies (must match the C++ enum values exactly)
BMI270AuxDevice = bmi270_ns.enum("BMI270AuxDevice")
BMI270AccelRange = bmi270_ns.enum("BMI270AccelRange")
@@ -57,50 +65,49 @@ GYRO_ODR_OPTIONS = {
"3200HZ": BMI270GyroODR.BMI270_GYRO_ODR_3200,
}
# Top-level CONFIG_SCHEMA
CONFIG_SCHEMA = (
motion_schema(BMI270Component, has_accel=True, has_gyro=True)
.extend(
{
cv.Optional(CONF_ACCELEROMETER_RANGE, default="4G"): cv.enum(
ACCEL_RANGE_OPTIONS, upper=True
),
cv.Optional(CONF_ACCELEROMETER_ODR, default="100HZ"): cv.enum(
ACCEL_ODR_OPTIONS, upper=True
),
cv.Optional(CONF_GYROSCOPE_RANGE, default="2000DPS"): cv.enum(
cv.Optional(
CONF_ACCELEROMETER_RANGE, default=DEFAULT_ACCELEROMETER_RANGE
): cv.enum(ACCEL_RANGE_OPTIONS, upper=True),
cv.Optional(
CONF_ACCELEROMETER_ODR, default=DEFAULT_ACCELEROMETER_ODR
): cv.enum(ACCEL_ODR_OPTIONS, upper=True),
cv.Optional(CONF_GYROSCOPE_RANGE, default=DEFAULT_GYROSCOPE_RANGE): cv.enum(
GYRO_RANGE_OPTIONS, upper=True
),
cv.Optional(CONF_GYROSCOPE_ODR, default="200HZ"): cv.enum(
cv.Optional(CONF_GYROSCOPE_ODR, default=DEFAULT_GYROSCOPE_ODR): cv.enum(
GYRO_ODR_OPTIONS, upper=True
),
# Optional device wired to the BMI270's aux interface (not the main I2C bus).
# Defaults to NONE so existing configs/boards are unaffected.
cv.Optional(CONF_AUX_DEVICE, default="NONE"): cv.one_of(
"NONE", "BMM150", upper=True
),
# Default matches the BMM150's fixed I2C address; irrelevant when aux_device is NONE.
cv.Optional(CONF_AUX_ADDRESS, default=0x10): cv.i2c_address,
cv.Optional(CONF_AUX_ADDRESS, default=DEFAULT_AUX_ADDRESS): cv.i2c_address,
}
)
.extend(i2c.i2c_device_schema(0x68))
)
# Code generation
async def to_code(config: ConfigType) -> None:
var = await new_motion_component(config)
await i2c.register_i2c_device(var, config)
# Accelerometer sensors
# Hardware configuration
cg.add(var.set_accel_range(config[CONF_ACCELEROMETER_RANGE]))
cg.add(var.set_accel_odr(config[CONF_ACCELEROMETER_ODR]))
cg.add(var.set_gyro_range(config[CONF_GYROSCOPE_RANGE]))
cg.add(var.set_gyro_odr(config[CONF_GYROSCOPE_ODR]))
# The C++ members already hold the schema defaults
for key, default, setter in (
(CONF_ACCELEROMETER_RANGE, DEFAULT_ACCELEROMETER_RANGE, var.set_accel_range),
(CONF_ACCELEROMETER_ODR, DEFAULT_ACCELEROMETER_ODR, var.set_accel_odr),
(CONF_GYROSCOPE_RANGE, DEFAULT_GYROSCOPE_RANGE, var.set_gyro_range),
(CONF_GYROSCOPE_ODR, DEFAULT_GYROSCOPE_ODR, var.set_gyro_odr),
):
if config[key] != default:
cg.add(setter(config[key]))
# The aux interface code only compiles when some instance has a BMM150; the
# instance still records its own device, as another one may have none
if config[CONF_AUX_DEVICE] == "BMM150":
cg.add_define("USE_BMI270_BMM150")
cg.add(var.set_aux_device(BMI270AuxDevice.BMI270_AUX_DEVICE_BMM150))
cg.add(var.set_aux_device_address(config[CONF_AUX_ADDRESS]))
if (address := config[CONF_AUX_ADDRESS]) != DEFAULT_AUX_ADDRESS:
cg.add(var.set_aux_device_address(address))
+4 -10
View File
@@ -515,18 +515,12 @@ void CC1101Component::dump_config() {
}
void CC1101Component::begin_tx() {
this->wake_up();
// Read the mode before the PKTCTRL0 write below overwrites it in state_
const bool packet_mode = this->state_.PKT_FORMAT == static_cast<uint8_t>(PacketFormat::PACKET_FORMAT_FIFO);
// Ensure Packet Format is 3 (Async Serial)
this->write_(Register::PKTCTRL0, 0x32);
if (this->state_.PKT_FORMAT == static_cast<uint8_t>(PacketFormat::PACKET_FORMAT_FIFO)) {
ESP_LOGW(TAG, "begin_tx is for async serial mode; use send_packet in packet mode");
return;
}
ESP_LOGV(TAG, "Beginning TX sequence");
if (this->gdo0_pin_ != nullptr) {
// setup() only attaches the interrupt in packet mode. In async serial mode the pin may be
// shared with remote_receiver, and detaching here would remove the receiver's interrupt.
if (packet_mode) {
this->gdo0_pin_->detach_interrupt();
}
this->gdo0_pin_->pin_mode(gpio::FLAG_OUTPUT);
}
// Transition through IDLE to bypass CCA (Clear Channel Assessment) which can
@@ -63,13 +63,25 @@ void CST816Touchscreen::update_touches() {
uint8_t data[13];
if (!this->status_comm_result(this->read_bytes(REG_STATUS, data, sizeof data)))
return;
uint8_t num_of_touches = data[REG_TOUCH_NUM] & 3;
// The low nibble is the touch count. CST816/CST820 are single-touch;
// CST826/CST836 can report two points, but this driver only reads the first
// point. Some CST8xx controllers report an all-0xFF frame when idle or after
// disabling auto-sleep: the count lands above two and the coordinates are
// the 0xFFF sentinel, so both guards below reject it.
uint8_t num_of_touches = low_nibble(data[REG_TOUCH_NUM]);
if (num_of_touches == 0) {
return;
}
if (num_of_touches > 2) {
return;
}
uint16_t x = encode_uint16(low_nibble(data[REG_XPOS_HIGH]), data[REG_XPOS_LOW]);
uint16_t y = encode_uint16(low_nibble(data[REG_YPOS_HIGH]), data[REG_YPOS_LOW]);
if (x == 0x0FFF || y == 0x0FFF) {
return;
}
ESP_LOGV(TAG, "Read touch %d/%d", x, y);
this->add_raw_touch_position_(0, x, y);
}
+2
View File
@@ -94,5 +94,7 @@ FILTER_SOURCE_FILES = filter_source_files_from_platform(
PlatformFramework.LN882X_ARDUINO,
},
"debug_zephyr.cpp": {PlatformFramework.NRF52_ZEPHYR},
"debug_nrf52.cpp": {PlatformFramework.NRF52_ZEPHYR},
"debug_nrf54l.cpp": {PlatformFramework.NRF52_ZEPHYR},
}
)
+380
View File
@@ -0,0 +1,380 @@
#include "debug_component.h"
#ifdef USE_ZEPHYR
#include <nrfx.h>
#endif
#if defined(USE_ZEPHYR) && !defined(NRF54L_SERIES)
#include <cinttypes>
#include <cstdint>
#include "esphome/core/helpers.h"
#include "esphome/core/log.h"
#include <hal/nrf_power.h>
#define BOOTLOADER_VERSION_REGISTER NRF_TIMER2->CC[0]
namespace esphome::debug {
ESPHOME_LOG_TAG(TAG, "debug");
// Check if an nRF peripheral's ENABLE register indicates it is enabled.
// periph: peripheral register prefix (e.g. USBD, UARTE, SPI)
// reg: register block pointer (e.g. NRF_USBD, NRF_UARTE0)
#define NRF_PERIPH_ENABLED(periph, reg) \
YESNO(((reg)->ENABLE & periph##_ENABLE_ENABLE_Msk) == (periph##_ENABLE_ENABLE_Enabled << periph##_ENABLE_ENABLE_Pos))
constexpr std::uintptr_t MBR_PARAM_PAGE_ADDR = 0xFFC;
constexpr std::uintptr_t MBR_BOOTLOADER_ADDR = 0xFF8;
static inline uint32_t read_mem_u32(uintptr_t addr) {
// NOLINTNEXTLINE(performance-no-int-to-ptr,clang-analyzer-core.FixedAddressDereference)
return *reinterpret_cast<volatile uint32_t *>(addr);
}
static inline uint8_t read_mem_u8(uintptr_t addr) {
// NOLINTNEXTLINE(performance-no-int-to-ptr,clang-analyzer-core.FixedAddressDereference)
return *reinterpret_cast<volatile uint8_t *>(addr);
}
// defines from https://github.com/adafruit/Adafruit_nRF52_Bootloader which prints those information
constexpr uint32_t SD_MAGIC_NUMBER = 0x51B1E5DB;
constexpr uintptr_t MBR_SIZE = 0x1000;
constexpr uintptr_t SOFTDEVICE_INFO_STRUCT_OFFSET = 0x2000;
constexpr uintptr_t SD_ID_OFFSET = SOFTDEVICE_INFO_STRUCT_OFFSET + 0x10;
constexpr uintptr_t SD_VERSION_OFFSET = SOFTDEVICE_INFO_STRUCT_OFFSET + 0x14;
static inline bool is_sd_present() {
return read_mem_u32(SOFTDEVICE_INFO_STRUCT_OFFSET + MBR_SIZE + 4) == SD_MAGIC_NUMBER;
}
static inline uint32_t sd_id_get() {
if (read_mem_u8(MBR_SIZE + SOFTDEVICE_INFO_STRUCT_OFFSET) > (SD_ID_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) {
return read_mem_u32(MBR_SIZE + SD_ID_OFFSET);
}
return 0;
}
static inline uint32_t sd_version_get() {
if (read_mem_u8(MBR_SIZE + SOFTDEVICE_INFO_STRUCT_OFFSET) > (SD_VERSION_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) {
return read_mem_u32(MBR_SIZE + SD_VERSION_OFFSET);
}
return 0;
}
#ifdef ESPHOME_LOG_HAS_VERBOSE
// NOLINTBEGIN(clang-analyzer-core.FixedAddressDereference) -- nRF peripheral registers are MMIO at fixed addresses
static void log_peripherals_info() {
// most peripherals are enabled only when in use so ESP_LOGV is enough
ESP_LOGV(TAG, "Peripherals status:");
ESP_LOGV(TAG, " USBD: %-3s| UARTE0: %-3s| UARTE1: %-3s| UART0: %-3s", //
NRF_PERIPH_ENABLED(USBD, NRF_USBD), NRF_PERIPH_ENABLED(UARTE, NRF_UARTE0),
NRF_PERIPH_ENABLED(UARTE, NRF_UARTE1), NRF_PERIPH_ENABLED(UART, NRF_UART0));
ESP_LOGV(TAG, " TWIS0: %-3s| TWIS1: %-3s| TWIM0: %-3s| TWIM1: %-3s", //
NRF_PERIPH_ENABLED(TWIS, NRF_TWIS0), NRF_PERIPH_ENABLED(TWIS, NRF_TWIS1),
NRF_PERIPH_ENABLED(TWIM, NRF_TWIM0), NRF_PERIPH_ENABLED(TWIM, NRF_TWIM1));
ESP_LOGV(TAG, " TWI0: %-3s| TWI1: %-3s| COMP: %-3s| CCM: %-3s", //
NRF_PERIPH_ENABLED(TWI, NRF_TWI0), NRF_PERIPH_ENABLED(TWI, NRF_TWI1), NRF_PERIPH_ENABLED(COMP, NRF_COMP),
NRF_PERIPH_ENABLED(CCM, NRF_CCM));
ESP_LOGV(TAG, " PDM: %-3s| SPIS0: %-3s| SPIS1: %-3s| SPIS2: %-3s", //
NRF_PERIPH_ENABLED(PDM, NRF_PDM), NRF_PERIPH_ENABLED(SPIS, NRF_SPIS0), NRF_PERIPH_ENABLED(SPIS, NRF_SPIS1),
NRF_PERIPH_ENABLED(SPIS, NRF_SPIS2));
ESP_LOGV(TAG, " SPIM0: %-3s| SPIM1: %-3s| SPIM2: %-3s| SPIM3: %-3s", //
NRF_PERIPH_ENABLED(SPIM, NRF_SPIM0), NRF_PERIPH_ENABLED(SPIM, NRF_SPIM1),
NRF_PERIPH_ENABLED(SPIM, NRF_SPIM2), NRF_PERIPH_ENABLED(SPIM, NRF_SPIM3));
ESP_LOGV(TAG, " SPI0: %-3s| SPI1: %-3s| SPI2: %-3s| SAADC: %-3s", //
NRF_PERIPH_ENABLED(SPI, NRF_SPI0), NRF_PERIPH_ENABLED(SPI, NRF_SPI1), NRF_PERIPH_ENABLED(SPI, NRF_SPI2),
NRF_PERIPH_ENABLED(SAADC, NRF_SAADC));
ESP_LOGV(TAG, " QSPI: %-3s| QDEC: %-3s| LPCOMP: %-3s| I2S: %-3s", //
NRF_PERIPH_ENABLED(QSPI, NRF_QSPI), NRF_PERIPH_ENABLED(QDEC, NRF_QDEC),
NRF_PERIPH_ENABLED(LPCOMP, NRF_LPCOMP), NRF_PERIPH_ENABLED(I2S, NRF_I2S));
ESP_LOGV(TAG, " PWM0: %-3s| PWM1: %-3s| PWM2: %-3s| PWM3: %-3s", //
NRF_PERIPH_ENABLED(PWM, NRF_PWM0), NRF_PERIPH_ENABLED(PWM, NRF_PWM1), NRF_PERIPH_ENABLED(PWM, NRF_PWM2),
NRF_PERIPH_ENABLED(PWM, NRF_PWM3));
ESP_LOGV(TAG, " AAR: %-3s| QSPI deep power-down:%-3s| CRYPTOCELL: %-3s", NRF_PERIPH_ENABLED(AAR, NRF_AAR),
YESNO((NRF_QSPI->IFCONFIG0 & QSPI_IFCONFIG0_DPMENABLE_Msk) ==
(QSPI_IFCONFIG0_DPMENABLE_Enable << QSPI_IFCONFIG0_DPMENABLE_Pos)),
YESNO((NRF_CRYPTOCELL->ENABLE & CRYPTOCELL_ENABLE_ENABLE_Msk) ==
(CRYPTOCELL_ENABLE_ENABLE_Enabled << CRYPTOCELL_ENABLE_ENABLE_Pos)));
}
// NOLINTEND(clang-analyzer-core.FixedAddressDereference)
#endif
static const char *regout0_to_str(uint32_t value) {
switch (value) {
case (UICR_REGOUT0_VOUT_DEFAULT):
return "1.8V (default)";
case (UICR_REGOUT0_VOUT_1V8):
return "1.8V";
case (UICR_REGOUT0_VOUT_2V1):
return "2.1V";
case (UICR_REGOUT0_VOUT_2V4):
return "2.4V";
case (UICR_REGOUT0_VOUT_2V7):
return "2.7V";
case (UICR_REGOUT0_VOUT_3V0):
return "3.0V";
case (UICR_REGOUT0_VOUT_3V3):
return "3.3V";
default:
break;
}
return "???V";
}
size_t DebugComponent::get_device_info_(std::span<char, DEVICE_INFO_BUFFER_SIZE> buffer, size_t pos) {
constexpr size_t size = DEVICE_INFO_BUFFER_SIZE;
char *buf = buffer.data();
// Main supply status
// NOLINTNEXTLINE(clang-analyzer-core.FixedAddressDereference) -- NRF_POWER is MMIO at a fixed address
auto regstatus = nrf_power_mainregstatus_get(NRF_POWER);
const char *supply_status = (regstatus == NRF_POWER_MAINREGSTATUS_NORMAL) ? "Normal voltage." : "High voltage.";
ESP_LOGD(TAG, "Main supply status: %s", supply_status);
pos = buf_append_str(buf, size, pos, "|Main supply status: ");
pos = buf_append_str(buf, size, pos, supply_status);
// Regulator stage 0
if (nrf_power_mainregstatus_get(NRF_POWER) == NRF_POWER_MAINREGSTATUS_HIGH) {
const char *reg0_type = nrf_power_dcdcen_vddh_get(NRF_POWER) ? "DC/DC" : "LDO";
const char *reg0_voltage = regout0_to_str((NRF_UICR->REGOUT0 & UICR_REGOUT0_VOUT_Msk) >> UICR_REGOUT0_VOUT_Pos);
ESP_LOGD(TAG, "Regulator stage 0: %s, %s", reg0_type, reg0_voltage);
pos = buf_append_str(buf, size, pos, "|Regulator stage 0: ");
pos = buf_append_str(buf, size, pos, reg0_type);
pos = buf_append_str(buf, size, pos, ", ");
pos = buf_append_str(buf, size, pos, reg0_voltage);
#ifdef USE_NRF52_REG0_VOUT
if ((NRF_UICR->REGOUT0 & UICR_REGOUT0_VOUT_Msk) >> UICR_REGOUT0_VOUT_Pos != USE_NRF52_REG0_VOUT) {
ESP_LOGE(TAG, "Regulator stage 0: expected %s", regout0_to_str(USE_NRF52_REG0_VOUT));
}
#endif
} else {
ESP_LOGD(TAG, "Regulator stage 0: disabled");
pos = buf_append_str(buf, size, pos, "|Regulator stage 0: disabled");
}
// Regulator stage 1
const char *reg1_type = nrf_power_dcdcen_get(NRF_POWER) ? "DC/DC" : "LDO";
ESP_LOGD(TAG, "Regulator stage 1: %s", reg1_type);
pos = buf_append_str(buf, size, pos, "|Regulator stage 1: ");
pos = buf_append_str(buf, size, pos, reg1_type);
// USB power state
const char *usb_state;
if (nrf_power_usbregstatus_vbusdet_get(NRF_POWER)) {
usb_state = nrf_power_usbregstatus_outrdy_get(NRF_POWER) ? "ready" : "connected (regulator is not ready)";
} else {
usb_state = "disconnected";
}
ESP_LOGD(TAG, "USB power state: %s", usb_state);
pos = buf_append_str(buf, size, pos, "|USB power state: ");
pos = buf_append_str(buf, size, pos, usb_state);
// Power-fail comparator
bool enabled;
nrf_power_pof_thr_t pof_thr = nrf_power_pofcon_get(NRF_POWER, &enabled);
if (enabled) {
const char *pof_voltage;
switch (pof_thr) {
case POWER_POFCON_THRESHOLD_V17:
pof_voltage = "1.7V";
break;
case POWER_POFCON_THRESHOLD_V18:
pof_voltage = "1.8V";
break;
case POWER_POFCON_THRESHOLD_V19:
pof_voltage = "1.9V";
break;
case POWER_POFCON_THRESHOLD_V20:
pof_voltage = "2.0V";
break;
case POWER_POFCON_THRESHOLD_V21:
pof_voltage = "2.1V";
break;
case POWER_POFCON_THRESHOLD_V22:
pof_voltage = "2.2V";
break;
case POWER_POFCON_THRESHOLD_V23:
pof_voltage = "2.3V";
break;
case POWER_POFCON_THRESHOLD_V24:
pof_voltage = "2.4V";
break;
case POWER_POFCON_THRESHOLD_V25:
pof_voltage = "2.5V";
break;
case POWER_POFCON_THRESHOLD_V26:
pof_voltage = "2.6V";
break;
case POWER_POFCON_THRESHOLD_V27:
pof_voltage = "2.7V";
break;
case POWER_POFCON_THRESHOLD_V28:
pof_voltage = "2.8V";
break;
default:
pof_voltage = "???V";
break;
}
if (nrf_power_mainregstatus_get(NRF_POWER) == NRF_POWER_MAINREGSTATUS_HIGH) {
const char *vddh_voltage;
switch (nrf_power_pofcon_vddh_get(NRF_POWER)) {
case NRF_POWER_POFTHRVDDH_V27:
vddh_voltage = "2.7V";
break;
case NRF_POWER_POFTHRVDDH_V28:
vddh_voltage = "2.8V";
break;
case NRF_POWER_POFTHRVDDH_V29:
vddh_voltage = "2.9V";
break;
case NRF_POWER_POFTHRVDDH_V30:
vddh_voltage = "3.0V";
break;
case NRF_POWER_POFTHRVDDH_V31:
vddh_voltage = "3.1V";
break;
case NRF_POWER_POFTHRVDDH_V32:
vddh_voltage = "3.2V";
break;
case NRF_POWER_POFTHRVDDH_V33:
vddh_voltage = "3.3V";
break;
case NRF_POWER_POFTHRVDDH_V34:
vddh_voltage = "3.4V";
break;
case NRF_POWER_POFTHRVDDH_V35:
vddh_voltage = "3.5V";
break;
case NRF_POWER_POFTHRVDDH_V36:
vddh_voltage = "3.6V";
break;
case NRF_POWER_POFTHRVDDH_V37:
vddh_voltage = "3.7V";
break;
case NRF_POWER_POFTHRVDDH_V38:
vddh_voltage = "3.8V";
break;
case NRF_POWER_POFTHRVDDH_V39:
vddh_voltage = "3.9V";
break;
case NRF_POWER_POFTHRVDDH_V40:
vddh_voltage = "4.0V";
break;
case NRF_POWER_POFTHRVDDH_V41:
vddh_voltage = "4.1V";
break;
case NRF_POWER_POFTHRVDDH_V42:
vddh_voltage = "4.2V";
break;
default:
vddh_voltage = "???V";
break;
}
ESP_LOGD(TAG, "Power-fail comparator: %s, VDDH: %s", pof_voltage, vddh_voltage);
pos = buf_append_str(buf, size, pos, "|Power-fail comparator: ");
pos = buf_append_str(buf, size, pos, pof_voltage);
pos = buf_append_str(buf, size, pos, ", VDDH: ");
pos = buf_append_str(buf, size, pos, vddh_voltage);
} else {
ESP_LOGD(TAG, "Power-fail comparator: %s", pof_voltage);
pos = buf_append_str(buf, size, pos, "|Power-fail comparator: ");
pos = buf_append_str(buf, size, pos, pof_voltage);
}
} else {
ESP_LOGD(TAG, "Power-fail comparator: disabled");
pos = buf_append_str(buf, size, pos, "|Power-fail comparator: disabled");
}
auto package = [](uint32_t value) {
switch (value) {
case 0x2004:
return "QIxx - 7x7 73-pin aQFN";
case 0x2000:
return "QFxx - 6x6 48-pin QFN";
case 0x2005:
return "CKxx - 3.544 x 3.607 WLCSP";
default:
break;
}
return "Unspecified";
};
char mac_pretty[MAC_ADDRESS_PRETTY_BUFFER_SIZE];
get_mac_address_pretty_into_buffer(mac_pretty);
ESP_LOGD(TAG,
"nRF debug info:\n"
" Code page size: %u, code size: %u, device id: 0x%08x%08x\n"
" Encryption root: 0x%08x%08x%08x%08x, Identity Root: 0x%08x%08x%08x%08x\n"
" Device address type: %s, address: %s\n"
" Part code: nRF%x, version: %c%c%c%c, package: %s\n"
" RAM: %ukB, Flash: %ukB, production test: %sdone",
NRF_FICR->CODEPAGESIZE, NRF_FICR->CODESIZE, NRF_FICR->DEVICEID[1], NRF_FICR->DEVICEID[0], NRF_FICR->ER[0],
NRF_FICR->ER[1], NRF_FICR->ER[2], NRF_FICR->ER[3], NRF_FICR->IR[0], NRF_FICR->IR[1], NRF_FICR->IR[2],
NRF_FICR->IR[3], (NRF_FICR->DEVICEADDRTYPE & 0x1 ? LOG_STR_LITERAL("Random") : LOG_STR_LITERAL("Public")),
mac_pretty, NRF_FICR->INFO.PART, NRF_FICR->INFO.VARIANT >> 24 & 0xFF, NRF_FICR->INFO.VARIANT >> 16 & 0xFF,
NRF_FICR->INFO.VARIANT >> 8 & 0xFF, NRF_FICR->INFO.VARIANT & 0xFF, package(NRF_FICR->INFO.PACKAGE),
NRF_FICR->INFO.RAM, NRF_FICR->INFO.FLASH,
(NRF_FICR->PRODTEST[0] == 0xBB42319F ? LOG_STR_LITERAL("") : LOG_STR_LITERAL("not ")));
bool n_reset_enabled = NRF_UICR->PSELRESET[0] == NRF_UICR->PSELRESET[1] &&
(NRF_UICR->PSELRESET[0] & UICR_PSELRESET_CONNECT_Msk) == UICR_PSELRESET_CONNECT_Connected
<< UICR_PSELRESET_CONNECT_Pos;
ESP_LOGD(
TAG, " GPIO as NFC pins: %s, GPIO as nRESET pin: %s",
YESNO((NRF_UICR->NFCPINS & UICR_NFCPINS_PROTECT_Msk) == (UICR_NFCPINS_PROTECT_NFC << UICR_NFCPINS_PROTECT_Pos)),
YESNO(n_reset_enabled));
if (n_reset_enabled) {
uint8_t port = (NRF_UICR->PSELRESET[0] & UICR_PSELRESET_PORT_Msk) >> UICR_PSELRESET_PORT_Pos;
uint8_t pin = (NRF_UICR->PSELRESET[0] & UICR_PSELRESET_PIN_Msk) >> UICR_PSELRESET_PIN_Pos;
ESP_LOGD(TAG, " nRESET port P%u.%02u", port, pin);
}
#ifdef USE_BOOTLOADER_MCUBOOT
ESP_LOGD(TAG, " Bootloader: mcuboot");
#else
ESP_LOGD(TAG, " Bootloader: Adafruit, version %u.%u.%u", (BOOTLOADER_VERSION_REGISTER >> 16) & 0xFF,
(BOOTLOADER_VERSION_REGISTER >> 8) & 0xFF, BOOTLOADER_VERSION_REGISTER & 0xFF);
ESP_LOGD(TAG, " MBR bootloader addr 0x%08x, UICR bootloader addr 0x%08x", read_mem_u32(MBR_BOOTLOADER_ADDR),
NRF_UICR->NRFFW[0]);
ESP_LOGD(TAG, " MBR param page addr 0x%08x, UICR param page addr 0x%08x", read_mem_u32(MBR_PARAM_PAGE_ADDR),
NRF_UICR->NRFFW[1]);
if (is_sd_present()) {
uint32_t const sd_id = sd_id_get();
uint32_t const sd_version = sd_version_get();
uint32_t ver[3];
ver[0] = sd_version / 1000000;
ver[1] = (sd_version - ver[0] * 1000000) / 1000;
ver[2] = (sd_version - ver[0] * 1000000 - ver[1] * 1000);
ESP_LOGD(TAG, " SoftDevice: S%u %u.%u.%u", sd_id, ver[0], ver[1], ver[2]);
#ifdef USE_SOFTDEVICE_ID
#ifdef USE_SOFTDEVICE_VERSION
if (USE_SOFTDEVICE_ID != sd_id || USE_SOFTDEVICE_VERSION != ver[0]) {
ESP_LOGE(TAG, "Built for SoftDevice S%u %u.x.y. It may crash due to mismatch of bootloader version.",
USE_SOFTDEVICE_ID, USE_SOFTDEVICE_VERSION);
}
#else
if (USE_SOFTDEVICE_ID != sd_id) {
ESP_LOGE(TAG, "Built for SoftDevice S%u. It may crash due to mismatch of bootloader version.", USE_SOFTDEVICE_ID);
}
#endif
#endif
}
#endif
// 13 words of 8 hex digits, separated by spaces
char uicr_buf[13 * 9];
auto uicr = [&uicr_buf](volatile uint32_t *data, uint8_t size) {
size_t len = 0;
for (size_t i = 0; i < size; i++) {
len = buf_append_printf(uicr_buf, sizeof(uicr_buf), len, i > 0 ? " %08" PRIX32 : "%08" PRIX32, data[i]);
}
return uicr_buf;
};
ESP_LOGD(TAG, " NRFFW %s", uicr(NRF_UICR->NRFFW, 13));
ESP_LOGD(TAG, " NRFHW %s", uicr(NRF_UICR->NRFHW, 12));
#ifdef ESPHOME_LOG_HAS_VERBOSE
log_peripherals_info();
#endif
return pos;
}
#undef NRF_PERIPH_ENABLED
} // namespace esphome::debug
#endif
+113
View File
@@ -0,0 +1,113 @@
#include "debug_component.h"
#ifdef USE_ZEPHYR
#include <nrfx.h>
#endif
#if defined(USE_ZEPHYR) && defined(NRF54L_SERIES)
#include <cinttypes>
#include "esphome/core/helpers.h"
#include "esphome/core/log.h"
namespace esphome::debug {
ESPHOME_LOG_TAG(TAG, "debug");
// Check if an nRF peripheral's ENABLE register indicates it is enabled.
// periph: peripheral register prefix (e.g. USBD, UARTE, SPI)
// reg: register block pointer (e.g. NRF_USBD, NRF_UARTE0)
#define NRF_PERIPH_ENABLED(periph, reg) \
YESNO(((reg)->ENABLE & periph##_ENABLE_ENABLE_Msk) == (periph##_ENABLE_ENABLE_Enabled << periph##_ENABLE_ENABLE_Pos))
#ifdef ESPHOME_LOG_HAS_VERBOSE
// NOLINTBEGIN(clang-analyzer-core.FixedAddressDereference) -- nRF peripheral registers are MMIO at fixed addresses
static void log_peripherals_info() {
// most peripherals are enabled only when in use so ESP_LOGV is enough
// UARTE, SPIM, SPIS, TWIM and TWIS with the same number share one instance
ESP_LOGV(TAG, "Peripherals status:");
ESP_LOGV(TAG, " UARTE00: %-3s| UARTE20: %-3s| UARTE21: %-3s| UARTE22: %-3s| UARTE30: %-3s", //
NRF_PERIPH_ENABLED(UARTE, NRF_UARTE00), NRF_PERIPH_ENABLED(UARTE, NRF_UARTE20),
NRF_PERIPH_ENABLED(UARTE, NRF_UARTE21), NRF_PERIPH_ENABLED(UARTE, NRF_UARTE22),
NRF_PERIPH_ENABLED(UARTE, NRF_UARTE30));
ESP_LOGV(TAG, " SPIM00: %-3s| SPIM20: %-3s| SPIM21: %-3s| SPIM22: %-3s| SPIM30: %-3s", //
NRF_PERIPH_ENABLED(SPIM, NRF_SPIM00), NRF_PERIPH_ENABLED(SPIM, NRF_SPIM20),
NRF_PERIPH_ENABLED(SPIM, NRF_SPIM21), NRF_PERIPH_ENABLED(SPIM, NRF_SPIM22),
NRF_PERIPH_ENABLED(SPIM, NRF_SPIM30));
ESP_LOGV(TAG, " SPIS00: %-3s| SPIS20: %-3s| SPIS21: %-3s| SPIS22: %-3s| SPIS30: %-3s", //
NRF_PERIPH_ENABLED(SPIS, NRF_SPIS00), NRF_PERIPH_ENABLED(SPIS, NRF_SPIS20),
NRF_PERIPH_ENABLED(SPIS, NRF_SPIS21), NRF_PERIPH_ENABLED(SPIS, NRF_SPIS22),
NRF_PERIPH_ENABLED(SPIS, NRF_SPIS30));
ESP_LOGV(TAG, " TWIM20: %-3s| TWIM21: %-3s| TWIM22: %-3s| TWIM30: %-3s", //
NRF_PERIPH_ENABLED(TWIM, NRF_TWIM20), NRF_PERIPH_ENABLED(TWIM, NRF_TWIM21),
NRF_PERIPH_ENABLED(TWIM, NRF_TWIM22), NRF_PERIPH_ENABLED(TWIM, NRF_TWIM30));
ESP_LOGV(TAG, " TWIS20: %-3s| TWIS21: %-3s| TWIS22: %-3s| TWIS30: %-3s", //
NRF_PERIPH_ENABLED(TWIS, NRF_TWIS20), NRF_PERIPH_ENABLED(TWIS, NRF_TWIS21),
NRF_PERIPH_ENABLED(TWIS, NRF_TWIS22), NRF_PERIPH_ENABLED(TWIS, NRF_TWIS30));
ESP_LOGV(TAG, " PWM20: %-3s| PWM21: %-3s| PWM22: %-3s| SAADC: %-3s", //
NRF_PERIPH_ENABLED(PWM, NRF_PWM20), NRF_PERIPH_ENABLED(PWM, NRF_PWM21), NRF_PERIPH_ENABLED(PWM, NRF_PWM22),
NRF_PERIPH_ENABLED(SAADC, NRF_SAADC));
ESP_LOGV(TAG, " PDM20: %-3s| PDM21: %-3s| QDEC20: %-3s| QDEC21: %-3s", //
NRF_PERIPH_ENABLED(PDM, NRF_PDM20), NRF_PERIPH_ENABLED(PDM, NRF_PDM21), NRF_PERIPH_ENABLED(QDEC, NRF_QDEC20),
NRF_PERIPH_ENABLED(QDEC, NRF_QDEC21));
ESP_LOGV(TAG, " COMP: %-3s| LPCOMP: %-3s| AAR00: %-3s| CCM00: %-3s", //
NRF_PERIPH_ENABLED(COMP, NRF_COMP), NRF_PERIPH_ENABLED(LPCOMP, NRF_LPCOMP),
NRF_PERIPH_ENABLED(AAR, NRF_AAR00), NRF_PERIPH_ENABLED(CCM, NRF_CCM00));
}
// NOLINTEND(clang-analyzer-core.FixedAddressDereference)
#endif
// NOLINTBEGIN(clang-analyzer-core.FixedAddressDereference) -- nRF registers are MMIO at fixed addresses
size_t DebugComponent::get_device_info_(std::span<char, DEVICE_INFO_BUFFER_SIZE> buffer, size_t pos) {
constexpr size_t size = DEVICE_INFO_BUFFER_SIZE;
char *buf = buffer.data();
// Main regulator
const char *reg_type = (NRF_REGULATORS->VREGMAIN.DCDCEN & REGULATORS_VREGMAIN_DCDCEN_VAL_Msk) ==
(REGULATORS_VREGMAIN_DCDCEN_VAL_Enabled << REGULATORS_VREGMAIN_DCDCEN_VAL_Pos)
? "DC/DC"
: "LDO";
ESP_LOGD(TAG, "Main regulator: %s", reg_type);
pos = buf_append_str(buf, size, pos, "|Main regulator: ");
pos = buf_append_str(buf, size, pos, reg_type);
// Power-fail comparator, the threshold goes from 1.7V up in 0.1V steps
const uint32_t pofcon = NRF_REGULATORS->POFCON;
if ((pofcon & REGULATORS_POFCON_POF_Msk) == (REGULATORS_POFCON_POF_Enabled << REGULATORS_POFCON_POF_Pos)) {
const uint32_t decivolts = 17 + ((pofcon & REGULATORS_POFCON_THRESHOLD_Msk) >> REGULATORS_POFCON_THRESHOLD_Pos);
ESP_LOGD(TAG, "Power-fail comparator: %" PRIu32 ".%" PRIu32 "V", decivolts / 10, decivolts % 10);
pos = buf_append_printf(buf, size, pos, "|Power-fail comparator: %" PRIu32 ".%" PRIu32 "V", decivolts / 10,
decivolts % 10);
} else {
ESP_LOGD(TAG, "Power-fail comparator: disabled");
pos = buf_append_str(buf, size, pos, "|Power-fail comparator: disabled");
}
char mac_pretty[MAC_ADDRESS_PRETTY_BUFFER_SIZE];
get_mac_address_pretty_into_buffer(mac_pretty);
const uint32_t variant = NRF_FICR->INFO.VARIANT;
ESP_LOGD(TAG,
"nRF debug info:\n"
" Device id: 0x%08" PRIx32 "%08" PRIx32 "\n"
" Encryption root: 0x%08" PRIx32 "%08" PRIx32 "%08" PRIx32 "%08" PRIx32 ", Identity Root: 0x%08" PRIx32
"%08" PRIx32 "%08" PRIx32 "%08" PRIx32 "\n"
" Device address type: %s, address: %s\n"
" Part code: 0x%" PRIx32 ", version: %c%c%c%c, package: 0x%" PRIx32 "\n"
" RAM: %" PRIu32 "kB, RRAM: %" PRIu32 "kB",
NRF_FICR->INFO.DEVICEID[1], NRF_FICR->INFO.DEVICEID[0], NRF_FICR->ER[0], NRF_FICR->ER[1], NRF_FICR->ER[2],
NRF_FICR->ER[3], NRF_FICR->IR[0], NRF_FICR->IR[1], NRF_FICR->IR[2], NRF_FICR->IR[3],
(NRF_FICR->DEVICEADDRTYPE & 0x1 ? LOG_STR_LITERAL("Random") : LOG_STR_LITERAL("Public")), mac_pretty,
NRF_FICR->INFO.PART, static_cast<char>(variant >> 24 & 0xFF), static_cast<char>(variant >> 16 & 0xFF),
static_cast<char>(variant >> 8 & 0xFF), static_cast<char>(variant & 0xFF), NRF_FICR->INFO.PACKAGE,
NRF_FICR->INFO.RAM, NRF_FICR->INFO.RRAM);
#ifdef USE_BOOTLOADER_MCUBOOT
ESP_LOGD(TAG, " Bootloader: mcuboot");
#endif
#ifdef ESPHOME_LOG_HAS_VERBOSE
log_peripherals_info();
#endif
return pos;
}
// NOLINTEND(clang-analyzer-core.FixedAddressDereference)
#undef NRF_PERIPH_ENABLED
} // namespace esphome::debug
#endif
-364
View File
@@ -2,55 +2,14 @@
#ifdef USE_ZEPHYR
#include <cinttypes>
#include <climits>
#include "esphome/core/alloc_helpers.h"
#include "esphome/core/log.h"
#include <esphome/components/zephyr/reset_reason.h>
#include <zephyr/drivers/hwinfo.h>
#include <zephyr/kernel.h>
#include <hal/nrf_power.h>
#include <cstdint>
#include <zephyr/storage/flash_map.h>
#define BOOTLOADER_VERSION_REGISTER NRF_TIMER2->CC[0]
namespace esphome::debug {
ESPHOME_LOG_TAG(TAG, "debug");
constexpr std::uintptr_t MBR_PARAM_PAGE_ADDR = 0xFFC;
constexpr std::uintptr_t MBR_BOOTLOADER_ADDR = 0xFF8;
static inline uint32_t read_mem_u32(uintptr_t addr) {
// NOLINTNEXTLINE(performance-no-int-to-ptr,clang-analyzer-core.FixedAddressDereference)
return *reinterpret_cast<volatile uint32_t *>(addr);
}
static inline uint8_t read_mem_u8(uintptr_t addr) {
// NOLINTNEXTLINE(performance-no-int-to-ptr,clang-analyzer-core.FixedAddressDereference)
return *reinterpret_cast<volatile uint8_t *>(addr);
}
// defines from https://github.com/adafruit/Adafruit_nRF52_Bootloader which prints those information
constexpr uint32_t SD_MAGIC_NUMBER = 0x51B1E5DB;
constexpr uintptr_t MBR_SIZE = 0x1000;
constexpr uintptr_t SOFTDEVICE_INFO_STRUCT_OFFSET = 0x2000;
constexpr uintptr_t SD_ID_OFFSET = SOFTDEVICE_INFO_STRUCT_OFFSET + 0x10;
constexpr uintptr_t SD_VERSION_OFFSET = SOFTDEVICE_INFO_STRUCT_OFFSET + 0x14;
static inline bool is_sd_present() {
return read_mem_u32(SOFTDEVICE_INFO_STRUCT_OFFSET + MBR_SIZE + 4) == SD_MAGIC_NUMBER;
}
static inline uint32_t sd_id_get() {
if (read_mem_u8(MBR_SIZE + SOFTDEVICE_INFO_STRUCT_OFFSET) > (SD_ID_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) {
return read_mem_u32(MBR_SIZE + SD_ID_OFFSET);
}
return 0;
}
static inline uint32_t sd_version_get() {
if (read_mem_u8(MBR_SIZE + SOFTDEVICE_INFO_STRUCT_OFFSET) > (SD_VERSION_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) {
return read_mem_u32(MBR_SIZE + SD_VERSION_OFFSET);
}
return 0;
}
const char *DebugComponent::get_reset_reason_(std::span<char, RESET_REASON_BUFFER_SIZE> buffer) {
const char *buf = zephyr::get_reset_reason(buffer);
@@ -96,329 +55,6 @@ void DebugComponent::log_partition_info_() {
flash_area_foreach(fa_cb, nullptr);
}
#ifdef ESPHOME_LOG_HAS_VERBOSE
// Check if an nRF peripheral's ENABLE register indicates it is enabled.
// periph: peripheral register prefix (e.g. USBD, UARTE, SPI)
// reg: register block pointer (e.g. NRF_USBD, NRF_UARTE0)
#define NRF_PERIPH_ENABLED(periph, reg) \
YESNO(((reg)->ENABLE & periph##_ENABLE_ENABLE_Msk) == (periph##_ENABLE_ENABLE_Enabled << periph##_ENABLE_ENABLE_Pos))
// NOLINTBEGIN(clang-analyzer-core.FixedAddressDereference) -- nRF peripheral registers are MMIO at fixed addresses
static void log_peripherals_info() {
// most peripherals are enabled only when in use so ESP_LOGV is enough
ESP_LOGV(TAG, "Peripherals status:");
ESP_LOGV(TAG, " USBD: %-3s| UARTE0: %-3s| UARTE1: %-3s| UART0: %-3s", //
NRF_PERIPH_ENABLED(USBD, NRF_USBD), NRF_PERIPH_ENABLED(UARTE, NRF_UARTE0),
NRF_PERIPH_ENABLED(UARTE, NRF_UARTE1), NRF_PERIPH_ENABLED(UART, NRF_UART0));
ESP_LOGV(TAG, " TWIS0: %-3s| TWIS1: %-3s| TWIM0: %-3s| TWIM1: %-3s", //
NRF_PERIPH_ENABLED(TWIS, NRF_TWIS0), NRF_PERIPH_ENABLED(TWIS, NRF_TWIS1),
NRF_PERIPH_ENABLED(TWIM, NRF_TWIM0), NRF_PERIPH_ENABLED(TWIM, NRF_TWIM1));
ESP_LOGV(TAG, " TWI0: %-3s| TWI1: %-3s| COMP: %-3s| CCM: %-3s", //
NRF_PERIPH_ENABLED(TWI, NRF_TWI0), NRF_PERIPH_ENABLED(TWI, NRF_TWI1), NRF_PERIPH_ENABLED(COMP, NRF_COMP),
NRF_PERIPH_ENABLED(CCM, NRF_CCM));
ESP_LOGV(TAG, " PDM: %-3s| SPIS0: %-3s| SPIS1: %-3s| SPIS2: %-3s", //
NRF_PERIPH_ENABLED(PDM, NRF_PDM), NRF_PERIPH_ENABLED(SPIS, NRF_SPIS0), NRF_PERIPH_ENABLED(SPIS, NRF_SPIS1),
NRF_PERIPH_ENABLED(SPIS, NRF_SPIS2));
ESP_LOGV(TAG, " SPIM0: %-3s| SPIM1: %-3s| SPIM2: %-3s| SPIM3: %-3s", //
NRF_PERIPH_ENABLED(SPIM, NRF_SPIM0), NRF_PERIPH_ENABLED(SPIM, NRF_SPIM1),
NRF_PERIPH_ENABLED(SPIM, NRF_SPIM2), NRF_PERIPH_ENABLED(SPIM, NRF_SPIM3));
ESP_LOGV(TAG, " SPI0: %-3s| SPI1: %-3s| SPI2: %-3s| SAADC: %-3s", //
NRF_PERIPH_ENABLED(SPI, NRF_SPI0), NRF_PERIPH_ENABLED(SPI, NRF_SPI1), NRF_PERIPH_ENABLED(SPI, NRF_SPI2),
NRF_PERIPH_ENABLED(SAADC, NRF_SAADC));
ESP_LOGV(TAG, " QSPI: %-3s| QDEC: %-3s| LPCOMP: %-3s| I2S: %-3s", //
NRF_PERIPH_ENABLED(QSPI, NRF_QSPI), NRF_PERIPH_ENABLED(QDEC, NRF_QDEC),
NRF_PERIPH_ENABLED(LPCOMP, NRF_LPCOMP), NRF_PERIPH_ENABLED(I2S, NRF_I2S));
ESP_LOGV(TAG, " PWM0: %-3s| PWM1: %-3s| PWM2: %-3s| PWM3: %-3s", //
NRF_PERIPH_ENABLED(PWM, NRF_PWM0), NRF_PERIPH_ENABLED(PWM, NRF_PWM1), NRF_PERIPH_ENABLED(PWM, NRF_PWM2),
NRF_PERIPH_ENABLED(PWM, NRF_PWM3));
ESP_LOGV(TAG, " AAR: %-3s| QSPI deep power-down:%-3s| CRYPTOCELL: %-3s", NRF_PERIPH_ENABLED(AAR, NRF_AAR),
YESNO((NRF_QSPI->IFCONFIG0 & QSPI_IFCONFIG0_DPMENABLE_Msk) ==
(QSPI_IFCONFIG0_DPMENABLE_Enable << QSPI_IFCONFIG0_DPMENABLE_Pos)),
YESNO((NRF_CRYPTOCELL->ENABLE & CRYPTOCELL_ENABLE_ENABLE_Msk) ==
(CRYPTOCELL_ENABLE_ENABLE_Enabled << CRYPTOCELL_ENABLE_ENABLE_Pos)));
}
// NOLINTEND(clang-analyzer-core.FixedAddressDereference)
#undef NRF_PERIPH_ENABLED
#endif
static const char *regout0_to_str(uint32_t value) {
switch (value) {
case (UICR_REGOUT0_VOUT_DEFAULT):
return "1.8V (default)";
case (UICR_REGOUT0_VOUT_1V8):
return "1.8V";
case (UICR_REGOUT0_VOUT_2V1):
return "2.1V";
case (UICR_REGOUT0_VOUT_2V4):
return "2.4V";
case (UICR_REGOUT0_VOUT_2V7):
return "2.7V";
case (UICR_REGOUT0_VOUT_3V0):
return "3.0V";
case (UICR_REGOUT0_VOUT_3V3):
return "3.3V";
default:
break;
}
return "???V";
}
size_t DebugComponent::get_device_info_(std::span<char, DEVICE_INFO_BUFFER_SIZE> buffer, size_t pos) {
constexpr size_t size = DEVICE_INFO_BUFFER_SIZE;
char *buf = buffer.data();
// Main supply status
// NOLINTNEXTLINE(clang-analyzer-core.FixedAddressDereference) -- NRF_POWER is MMIO at a fixed address
auto regstatus = nrf_power_mainregstatus_get(NRF_POWER);
const char *supply_status = (regstatus == NRF_POWER_MAINREGSTATUS_NORMAL) ? "Normal voltage." : "High voltage.";
ESP_LOGD(TAG, "Main supply status: %s", supply_status);
pos = buf_append_str(buf, size, pos, "|Main supply status: ");
pos = buf_append_str(buf, size, pos, supply_status);
// Regulator stage 0
if (nrf_power_mainregstatus_get(NRF_POWER) == NRF_POWER_MAINREGSTATUS_HIGH) {
const char *reg0_type = nrf_power_dcdcen_vddh_get(NRF_POWER) ? "DC/DC" : "LDO";
const char *reg0_voltage = regout0_to_str((NRF_UICR->REGOUT0 & UICR_REGOUT0_VOUT_Msk) >> UICR_REGOUT0_VOUT_Pos);
ESP_LOGD(TAG, "Regulator stage 0: %s, %s", reg0_type, reg0_voltage);
pos = buf_append_str(buf, size, pos, "|Regulator stage 0: ");
pos = buf_append_str(buf, size, pos, reg0_type);
pos = buf_append_str(buf, size, pos, ", ");
pos = buf_append_str(buf, size, pos, reg0_voltage);
#ifdef USE_NRF52_REG0_VOUT
if ((NRF_UICR->REGOUT0 & UICR_REGOUT0_VOUT_Msk) >> UICR_REGOUT0_VOUT_Pos != USE_NRF52_REG0_VOUT) {
ESP_LOGE(TAG, "Regulator stage 0: expected %s", regout0_to_str(USE_NRF52_REG0_VOUT));
}
#endif
} else {
ESP_LOGD(TAG, "Regulator stage 0: disabled");
pos = buf_append_str(buf, size, pos, "|Regulator stage 0: disabled");
}
// Regulator stage 1
const char *reg1_type = nrf_power_dcdcen_get(NRF_POWER) ? "DC/DC" : "LDO";
ESP_LOGD(TAG, "Regulator stage 1: %s", reg1_type);
pos = buf_append_str(buf, size, pos, "|Regulator stage 1: ");
pos = buf_append_str(buf, size, pos, reg1_type);
// USB power state
const char *usb_state;
if (nrf_power_usbregstatus_vbusdet_get(NRF_POWER)) {
usb_state = nrf_power_usbregstatus_outrdy_get(NRF_POWER) ? "ready" : "connected (regulator is not ready)";
} else {
usb_state = "disconnected";
}
ESP_LOGD(TAG, "USB power state: %s", usb_state);
pos = buf_append_str(buf, size, pos, "|USB power state: ");
pos = buf_append_str(buf, size, pos, usb_state);
// Power-fail comparator
bool enabled;
nrf_power_pof_thr_t pof_thr = nrf_power_pofcon_get(NRF_POWER, &enabled);
if (enabled) {
const char *pof_voltage;
switch (pof_thr) {
case POWER_POFCON_THRESHOLD_V17:
pof_voltage = "1.7V";
break;
case POWER_POFCON_THRESHOLD_V18:
pof_voltage = "1.8V";
break;
case POWER_POFCON_THRESHOLD_V19:
pof_voltage = "1.9V";
break;
case POWER_POFCON_THRESHOLD_V20:
pof_voltage = "2.0V";
break;
case POWER_POFCON_THRESHOLD_V21:
pof_voltage = "2.1V";
break;
case POWER_POFCON_THRESHOLD_V22:
pof_voltage = "2.2V";
break;
case POWER_POFCON_THRESHOLD_V23:
pof_voltage = "2.3V";
break;
case POWER_POFCON_THRESHOLD_V24:
pof_voltage = "2.4V";
break;
case POWER_POFCON_THRESHOLD_V25:
pof_voltage = "2.5V";
break;
case POWER_POFCON_THRESHOLD_V26:
pof_voltage = "2.6V";
break;
case POWER_POFCON_THRESHOLD_V27:
pof_voltage = "2.7V";
break;
case POWER_POFCON_THRESHOLD_V28:
pof_voltage = "2.8V";
break;
default:
pof_voltage = "???V";
break;
}
if (nrf_power_mainregstatus_get(NRF_POWER) == NRF_POWER_MAINREGSTATUS_HIGH) {
const char *vddh_voltage;
switch (nrf_power_pofcon_vddh_get(NRF_POWER)) {
case NRF_POWER_POFTHRVDDH_V27:
vddh_voltage = "2.7V";
break;
case NRF_POWER_POFTHRVDDH_V28:
vddh_voltage = "2.8V";
break;
case NRF_POWER_POFTHRVDDH_V29:
vddh_voltage = "2.9V";
break;
case NRF_POWER_POFTHRVDDH_V30:
vddh_voltage = "3.0V";
break;
case NRF_POWER_POFTHRVDDH_V31:
vddh_voltage = "3.1V";
break;
case NRF_POWER_POFTHRVDDH_V32:
vddh_voltage = "3.2V";
break;
case NRF_POWER_POFTHRVDDH_V33:
vddh_voltage = "3.3V";
break;
case NRF_POWER_POFTHRVDDH_V34:
vddh_voltage = "3.4V";
break;
case NRF_POWER_POFTHRVDDH_V35:
vddh_voltage = "3.5V";
break;
case NRF_POWER_POFTHRVDDH_V36:
vddh_voltage = "3.6V";
break;
case NRF_POWER_POFTHRVDDH_V37:
vddh_voltage = "3.7V";
break;
case NRF_POWER_POFTHRVDDH_V38:
vddh_voltage = "3.8V";
break;
case NRF_POWER_POFTHRVDDH_V39:
vddh_voltage = "3.9V";
break;
case NRF_POWER_POFTHRVDDH_V40:
vddh_voltage = "4.0V";
break;
case NRF_POWER_POFTHRVDDH_V41:
vddh_voltage = "4.1V";
break;
case NRF_POWER_POFTHRVDDH_V42:
vddh_voltage = "4.2V";
break;
default:
vddh_voltage = "???V";
break;
}
ESP_LOGD(TAG, "Power-fail comparator: %s, VDDH: %s", pof_voltage, vddh_voltage);
pos = buf_append_str(buf, size, pos, "|Power-fail comparator: ");
pos = buf_append_str(buf, size, pos, pof_voltage);
pos = buf_append_str(buf, size, pos, ", VDDH: ");
pos = buf_append_str(buf, size, pos, vddh_voltage);
} else {
ESP_LOGD(TAG, "Power-fail comparator: %s", pof_voltage);
pos = buf_append_str(buf, size, pos, "|Power-fail comparator: ");
pos = buf_append_str(buf, size, pos, pof_voltage);
}
} else {
ESP_LOGD(TAG, "Power-fail comparator: disabled");
pos = buf_append_str(buf, size, pos, "|Power-fail comparator: disabled");
}
auto package = [](uint32_t value) {
switch (value) {
case 0x2004:
return "QIxx - 7x7 73-pin aQFN";
case 0x2000:
return "QFxx - 6x6 48-pin QFN";
case 0x2005:
return "CKxx - 3.544 x 3.607 WLCSP";
default:
break;
}
return "Unspecified";
};
char mac_pretty[MAC_ADDRESS_PRETTY_BUFFER_SIZE];
get_mac_address_pretty_into_buffer(mac_pretty);
ESP_LOGD(TAG,
"nRF debug info:\n"
" Code page size: %u, code size: %u, device id: 0x%08x%08x\n"
" Encryption root: 0x%08x%08x%08x%08x, Identity Root: 0x%08x%08x%08x%08x\n"
" Device address type: %s, address: %s\n"
" Part code: nRF%x, version: %c%c%c%c, package: %s\n"
" RAM: %ukB, Flash: %ukB, production test: %sdone",
NRF_FICR->CODEPAGESIZE, NRF_FICR->CODESIZE, NRF_FICR->DEVICEID[1], NRF_FICR->DEVICEID[0], NRF_FICR->ER[0],
NRF_FICR->ER[1], NRF_FICR->ER[2], NRF_FICR->ER[3], NRF_FICR->IR[0], NRF_FICR->IR[1], NRF_FICR->IR[2],
NRF_FICR->IR[3], (NRF_FICR->DEVICEADDRTYPE & 0x1 ? "Random" : "Public"), mac_pretty, NRF_FICR->INFO.PART,
NRF_FICR->INFO.VARIANT >> 24 & 0xFF, NRF_FICR->INFO.VARIANT >> 16 & 0xFF, NRF_FICR->INFO.VARIANT >> 8 & 0xFF,
NRF_FICR->INFO.VARIANT & 0xFF, package(NRF_FICR->INFO.PACKAGE), NRF_FICR->INFO.RAM, NRF_FICR->INFO.FLASH,
(NRF_FICR->PRODTEST[0] == 0xBB42319F ? "" : "not "));
bool n_reset_enabled = NRF_UICR->PSELRESET[0] == NRF_UICR->PSELRESET[1] &&
(NRF_UICR->PSELRESET[0] & UICR_PSELRESET_CONNECT_Msk) == UICR_PSELRESET_CONNECT_Connected
<< UICR_PSELRESET_CONNECT_Pos;
ESP_LOGD(
TAG, " GPIO as NFC pins: %s, GPIO as nRESET pin: %s",
YESNO((NRF_UICR->NFCPINS & UICR_NFCPINS_PROTECT_Msk) == (UICR_NFCPINS_PROTECT_NFC << UICR_NFCPINS_PROTECT_Pos)),
YESNO(n_reset_enabled));
if (n_reset_enabled) {
uint8_t port = (NRF_UICR->PSELRESET[0] & UICR_PSELRESET_PORT_Msk) >> UICR_PSELRESET_PORT_Pos;
uint8_t pin = (NRF_UICR->PSELRESET[0] & UICR_PSELRESET_PIN_Msk) >> UICR_PSELRESET_PIN_Pos;
ESP_LOGD(TAG, " nRESET port P%u.%02u", port, pin);
}
#ifdef USE_BOOTLOADER_MCUBOOT
ESP_LOGD(TAG, " Bootloader: mcuboot");
#else
ESP_LOGD(TAG, " Bootloader: Adafruit, version %u.%u.%u", (BOOTLOADER_VERSION_REGISTER >> 16) & 0xFF,
(BOOTLOADER_VERSION_REGISTER >> 8) & 0xFF, BOOTLOADER_VERSION_REGISTER & 0xFF);
ESP_LOGD(TAG, " MBR bootloader addr 0x%08x, UICR bootloader addr 0x%08x", read_mem_u32(MBR_BOOTLOADER_ADDR),
NRF_UICR->NRFFW[0]);
ESP_LOGD(TAG, " MBR param page addr 0x%08x, UICR param page addr 0x%08x", read_mem_u32(MBR_PARAM_PAGE_ADDR),
NRF_UICR->NRFFW[1]);
if (is_sd_present()) {
uint32_t const sd_id = sd_id_get();
uint32_t const sd_version = sd_version_get();
uint32_t ver[3];
ver[0] = sd_version / 1000000;
ver[1] = (sd_version - ver[0] * 1000000) / 1000;
ver[2] = (sd_version - ver[0] * 1000000 - ver[1] * 1000);
ESP_LOGD(TAG, " SoftDevice: S%u %u.%u.%u", sd_id, ver[0], ver[1], ver[2]);
#ifdef USE_SOFTDEVICE_ID
#ifdef USE_SOFTDEVICE_VERSION
if (USE_SOFTDEVICE_ID != sd_id || USE_SOFTDEVICE_VERSION != ver[0]) {
ESP_LOGE(TAG, "Built for SoftDevice S%u %u.x.y. It may crash due to mismatch of bootloader version.",
USE_SOFTDEVICE_ID, USE_SOFTDEVICE_VERSION);
}
#else
if (USE_SOFTDEVICE_ID != sd_id) {
ESP_LOGE(TAG, "Built for SoftDevice S%u. It may crash due to mismatch of bootloader version.", USE_SOFTDEVICE_ID);
}
#endif
#endif
}
#endif
// 13 words of 8 hex digits, separated by spaces
char uicr_buf[13 * 9];
auto uicr = [&uicr_buf](volatile uint32_t *data, uint8_t size) {
size_t len = 0;
for (size_t i = 0; i < size; i++) {
len = buf_append_printf(uicr_buf, sizeof(uicr_buf), len, i > 0 ? " %08" PRIX32 : "%08" PRIX32, data[i]);
}
return uicr_buf;
};
ESP_LOGD(TAG, " NRFFW %s", uicr(NRF_UICR->NRFFW, 13));
ESP_LOGD(TAG, " NRFHW %s", uicr(NRF_UICR->NRFHW, 12));
#ifdef ESPHOME_LOG_HAS_VERBOSE
log_peripherals_info();
#endif
return pos;
}
// The Python side enables the statistics only for a verbose logger
#ifdef CONFIG_SCHED_THREAD_USAGE_ANALYSIS
static void log_thread_usage(const struct k_thread *thread, void *user_data) {
+3 -4
View File
@@ -3001,7 +3001,7 @@ async def _finalize_arduino_aware_flags():
async def to_code(config):
framework_ver: cv.Version = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
framework_ver = CORE.framework_version
conf = config[CONF_FRAMEWORK]
# Check if using ESP-IDF toolchain
@@ -3838,9 +3838,8 @@ def _write_sdkconfig():
# version switch that happens to leave the option set unchanged still
# bumps this file's content -- which is what has_outdated_files()
# uses to decide whether to reconfigure.
framework_version = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
contents = (
f"# ESPHOME_IDF_VERSION={framework_version}\n"
f"# ESPHOME_IDF_VERSION={CORE.framework_version}\n"
+ "\n".join(
f"{name}={_format_sdkconfig_val(value)}"
for name, value in sorted(want_opts.items())
@@ -3991,7 +3990,7 @@ def _write_idf_component_yml():
if CORE.using_toolchain_esp_idf:
add_idf_component(
name=ARDUINO_ESP32_COMPONENT_NAME,
ref=str(CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]),
ref=str(CORE.framework_version),
)
for component in converted:
+1 -1
View File
@@ -529,7 +529,7 @@ async def to_code(config: ConfigType) -> None:
# keeping one source of truth
cg.add_platformio_option("board_build.flash_mode", config[CONF_BOARD_FLASH_MODE])
ver: cv.Version = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
ver = CORE.framework_version
cg.add_define(
"USE_ARDUINO_VERSION_CODE",
cg.RawExpression(f"VERSION_CODE({ver.major}, {ver.minor}, {ver.patch})"),
+2 -4
View File
@@ -46,8 +46,6 @@ from esphome.const import (
CONF_USE_ADDRESS,
CONF_VALUE,
CONF_WIFI,
KEY_CORE,
KEY_FRAMEWORK_VERSION,
Platform,
PlatformFramework,
)
@@ -347,13 +345,13 @@ def _validate(config: ConfigType) -> ConfigType:
if CONF_POLLING_INTERVAL in config:
raise cv.Invalid(
"In this version of the framework "
f"({CORE.target_framework} {CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]}), "
f"({CORE.target_framework} {CORE.framework_version}), "
f"'{CONF_POLLING_INTERVAL}' is not supported."
)
if CONF_INTERRUPT_PIN not in config:
raise cv.Invalid(
"In this version of the framework "
f"({CORE.target_framework} {CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]}), "
f"({CORE.target_framework} {CORE.framework_version}), "
f"'{CONF_INTERRUPT_PIN}' is a required option for [ethernet]."
)
elif config[CONF_TYPE] in ("GENERIC", "YT8531"):
+15 -29
View File
@@ -180,23 +180,18 @@ void ArduinoI2CBus::recover_() {
return;
}
// From the specification:
// "If the data line (SDA) is stuck LOW, send nine clock pulses. The
// device that held the bus LOW should release it sometime within
// those nine clocks."
// We don't really have to detect if SDA is stuck low. We'll simply send
// nine clock pulses here, just in case SDA is stuck. Actual checks on
// the SDA line status will be done after the clock pulses.
// Make sure that switching to output mode will make SCL low, just in
// case other code has setup the pin for a HIGH signal.
digitalWrite(this->scl_pin_, LOW); // NOLINT
// Activate input and pull up resistor for the SDA pin, so it can be read during the pulses.
pinMode(this->sda_pin_, INPUT_PULLUP); // NOLINT
delayMicroseconds(half_period_usec);
for (auto i = 0; i < 9; i++) {
// Release pull up resistor and switch to output to make the signal LOW.
pinMode(this->scl_pin_, INPUT); // NOLINT
pinMode(this->scl_pin_, OUTPUT); // NOLINT
// Spec: "If the data line (SDA) is stuck LOW, send nine clock pulses."
// Pulse only while SDA is low: a device receiving a write ACKs every ninth pulse.
for (auto i = 0; i < 9 && digitalRead(this->sda_pin_) == LOW; i++) { // NOLINT
// Drive LOW. Set the level while the pin is a plain input: on RP2040 a write to an
// INPUT_PULLUP pin drives it, which would leave SCL low if the loop never runs.
pinMode(this->scl_pin_, INPUT); // NOLINT
digitalWrite(this->scl_pin_, LOW); // NOLINT
pinMode(this->scl_pin_, OUTPUT); // NOLINT
delayMicroseconds(half_period_usec);
// Release output and activate pull up resistor to make the signal HIGH.
@@ -223,14 +218,7 @@ void ArduinoI2CBus::recover_() {
}
}
// Activate input and pull resistor for the SDA pin, so we can verify
// that SDA is pulled HIGH in the following step.
pinMode(this->sda_pin_, INPUT_PULLUP); // NOLINT
digitalWrite(this->sda_pin_, LOW); // NOLINT
// By now, any stuck device ought to have sent all remaining bits of its
// transaction, meaning that it should have freed up the SDA line, resulting
// in SDA being pulled up.
// A device still holding SDA after nine pulses cannot be freed here.
if (digitalRead(this->sda_pin_) == LOW) { // NOLINT
ESP_LOGE(TAG, "Recovery failed: SDA is held LOW after clock pulse cycle");
this->recovery_result_ = RECOVERY_FAILED_SDA_LOW;
@@ -242,15 +230,13 @@ void ArduinoI2CBus::recover_() {
// a START or repeated START condition such that they all anticipate
// the sending of a target address, even if these START conditions are
// not positioned according to the proper format."
// While the 9 clock pulses from above might have drained all bits of a
// single byte within a transaction, a device might have more bytes to
// transmit. So here we'll generate a START condition to snap the device
// out of this state.
// SDA high does not mean the device is idle (it may be mid-byte); the START resets it.
// SCL and SDA are already high at this point, so we can generate a START
// condition by making the SDA signal LOW.
delayMicroseconds(half_period_usec);
pinMode(this->sda_pin_, INPUT); // NOLINT
pinMode(this->sda_pin_, OUTPUT); // NOLINT
pinMode(this->sda_pin_, INPUT); // NOLINT
digitalWrite(this->sda_pin_, LOW); // NOLINT
pinMode(this->sda_pin_, OUTPUT); // NOLINT
// From the specification:
// "A START condition immediately followed by a STOP condition (void
+5 -15
View File
@@ -346,14 +346,9 @@ void IDFI2CBus::recover_() {
return;
}
// From the specification:
// "If the data line (SDA) is stuck LOW, send nine clock pulses. The
// device that held the bus LOW should release it sometime within
// those nine clocks."
// We don't really have to detect if SDA is stuck low. We'll simply send
// nine clock pulses here, just in case SDA is stuck. Actual checks on
// the SDA line status will be done after the clock pulses.
for (auto i = 0; i < 9; i++) {
// Spec: "If the data line (SDA) is stuck LOW, send nine clock pulses."
// Pulse only while SDA is low: a device receiving a write ACKs every ninth pulse.
for (auto i = 0; i < 9 && gpio_get_level(sda_pin) == 0; i++) {
gpio_set_level(scl_pin, 0);
delayMicroseconds(half_period_usec);
gpio_set_level(scl_pin, 1);
@@ -378,9 +373,7 @@ void IDFI2CBus::recover_() {
}
}
// By now, any stuck device ought to have sent all remaining bits of its
// transaction, meaning that it should have freed up the SDA line, resulting
// in SDA being pulled up.
// A device still holding SDA after nine pulses cannot be freed here.
if (gpio_get_level(sda_pin) == 0) {
ESP_LOGE(TAG, "Recovery failed: SDA is held LOW after clock pulse cycle");
this->recovery_result_ = RECOVERY_FAILED_SDA_LOW;
@@ -392,10 +385,7 @@ void IDFI2CBus::recover_() {
// a START or repeated START condition such that they all anticipate
// the sending of a target address, even if these START conditions are
// not positioned according to the proper format."
// While the 9 clock pulses from above might have drained all bits of a
// single byte within a transaction, a device might have more bytes to
// transmit. So here we'll generate a START condition to snap the device
// out of this state.
// SDA high does not mean the device is idle (it may be mid-byte); the START resets it.
// SCL and SDA are already high at this point, so we can generate a START
// condition by making the SDA signal LOW.
delayMicroseconds(half_period_usec);
+57 -2
View File
@@ -1,3 +1,4 @@
from dataclasses import dataclass
import json
import logging
from pathlib import Path
@@ -188,6 +189,61 @@ def get_board_pins() -> dict[str, int]:
return lookup_board_pins(get_libretiny_board())
@dataclass(frozen=True)
class HardwareUart:
"""A hardware UART of the configured board and the pin numbers it can use."""
port: int
tx_pins: tuple[int, ...]
rx_pins: tuple[int, ...]
# The board lists pin choices instead of a default pin for this direction
tx_pin_choices: bool
rx_pin_choices: bool
@property
def pin_choices(self) -> bool:
"""True when the pins must be passed when the UART starts."""
return self.tx_pin_choices or self.rx_pin_choices
def get_hardware_uarts() -> list[HardwareUart]:
"""Hardware UARTs of the configured board; empty for a board without pin data."""
board_pins = get_board_pins()
uarts = []
for port in range(3):
pins: dict[str, list[int]] = {"TX": [], "RX": []}
choices: dict[str, bool] = {"TX": False, "RX": False}
for role, role_pins in pins.items():
name = f"SERIAL{port}_{role}"
for key, pin in board_pins.items():
if key == name:
role_pins.append(pin)
elif key.startswith(f"{name}_"):
role_pins.append(pin)
choices[role] = True
if pins["TX"] or pins["RX"]:
uarts.append(
HardwareUart(
port,
tuple(pins["TX"]),
tuple(pins["RX"]),
choices["TX"],
choices["RX"],
)
)
return uarts
def has_software_serial() -> bool:
"""True when the family's Arduino core has SoftwareSerial (LT_ARD_HAS_SOFTSERIAL)."""
return get_libretiny_family() == FAMILY_RTL8710B
def can_choose_uart_pins() -> bool:
"""True when SerialClass::begin() takes the pins, which LibreTiny added in 1.12.0."""
return CORE.framework_version >= cv.Version(1, 12, 0)
def only_on_family(*, supported=None, unsupported=None):
"""Config validator for features only available on some LibreTiny families."""
if supported is not None and not isinstance(supported, list):
@@ -587,8 +643,7 @@ async def component_to_code(config):
build_src_flags += " -Os"
cg.add_platformio_option("build_src_flags", build_src_flags)
# LibreTiny before 1.14.0 breaks under SCons 4.11 without this script; see the script
version = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
if (version.major, version.minor, version.patch) < (1, 14, 0):
if CORE.framework_version < cv.Version(1, 14, 0):
cg.add_platformio_option("extra_scripts", ["pre:scons_dont_inherit.py"])
cg.add_platformio_option("extra_scripts", ["pre:ccache.py"])
# IRAM_ATTR is a no-op on BK72xx (SDK masks FIQ+IRQ around flash ops).
+15 -26
View File
@@ -94,7 +94,6 @@ UART_SELECTION_RP2040 = [USB_CDC, UART0, UART1]
UART_SELECTION_NRF52 = [USB_CDC, UART0]
# Read by device-builder
HARDWARE_UART_TO_UART_SELECTION = {
UART0: logger_ns.UART_SELECTION_UART0,
UART0_SWAP: logger_ns.UART_SELECTION_UART0_SWAP,
@@ -539,17 +538,17 @@ async def to_code(config: ConfigType) -> None:
cg.add(log.set_boot_log_level(tag, LOG_LEVELS[log_level]))
if CORE.is_esp32 or CORE.is_host:
cg.add(log.create_pthread_key())
if (hardware_uart := config.get(CONF_HARDWARE_UART)) is not None:
cg.add_define(f"USE_LOGGER_UART_SELECTION_{hardware_uart}")
cg.add_define(
"ESPHOME_LOGGER_UART_SELECTION",
cg.RawExpression(f"logger::UART_SELECTION_{hardware_uart}"),
)
# ESP8266 without serial logging never opens a port
cg.add_define(
"ESPHOME_LOGGER_UART_NAME",
"NONE" if CORE.is_esp8266 and baud_rate == 0 else hardware_uart,
)
# set_uart_selection() must be called before pre_setup() because
# pre_setup() switches on uart_ to decide which hardware to initialize
# (e.g. UART0 vs USB_SERIAL_JTAG). Without this, uart_ is still the
# default UART_SELECTION_UART0 and the wrong hardware gets initialized.
# uart_ is UART0 in C++ except on LibreTiny where it is DEFAULT; skip the
# setter when the config matches it.
cpp_default_uart = DEFAULT if CORE.is_libretiny else UART0
if (
hardware_uart := config.get(CONF_HARDWARE_UART)
) is not None and hardware_uart != cpp_default_uart:
cg.add(log.set_uart_selection(HARDWARE_UART_TO_UART_SELECTION[hardware_uart]))
# pre_setup() sets global_logger and must run before any other code
# that may call ESP_LOG* (e.g. setup_preferences contains ESP_LOGVV).
cg.add(log.pre_setup())
@@ -646,6 +645,7 @@ async def _late_logger_init(config: ConfigType) -> None:
add_idf_sdkconfig_option("CONFIG_ESP_CONSOLE_USB_CDC", True)
elif config[CONF_HARDWARE_UART] == USB_SERIAL_JTAG:
add_idf_sdkconfig_option("CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG", True)
cg.add_define("USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG")
# Log V2 formats centrally in esp_log() (~4KB flash, ~180B RAM). 6.1
# adds CONSTRAINED_ENV_SAFE=n, keeping early/DRAM logs on
# esp_rom_printf instead of pulling ~1.2KB esp_rom_vprintf into IRAM.
@@ -663,12 +663,10 @@ async def _late_logger_init(config: ConfigType) -> None:
# --wrap: a strong definition collides; see logger_esp32.cpp
cg.add_build_flag("-Wl,--wrap=esp_log_format")
# Zephyr polls the USB port only when it logs there
if (
CORE.using_zephyr
and has_serial_logging
and config[CONF_HARDWARE_UART] == USB_CDC
if config.get(CONF_HARDWARE_UART) == USB_CDC and (
has_serial_logging or not CORE.is_nrf52
):
cg.add_define("USE_LOGGER_ZEPHYR_CDC_LOOP")
cg.add_define("USE_LOGGER_UART_SELECTION_USB_CDC")
# Define platform support flags for components that need auto-detection
try:
uart_selection(USB_SERIAL_JTAG)
@@ -886,15 +884,6 @@ def request_logger_level_listeners() -> None:
_request_log_listener_slot = cg.slot_counter("ESPHOME_LOG_MAX_LISTENERS")
def request_console() -> None:
"""Compile in Logger::console_read() and console_write(); call from to_code.
On ESP32 a USB_CDC logger only has a console where ESP-IDF sets CONFIG_ESP_CONSOLE_USB_CDC (targets with
USB OTG); elsewhere, such as the C3, C6 or H2, both do nothing. Host and Zephyr have no console API.
"""
cg.add_define("USE_LOGGER_CONSOLE")
def request_log_listener() -> None:
"""Reserve a log listener slot; call once per listener from to_code."""
cg.add_define("USE_LOG_LISTENERS")
+3 -22
View File
@@ -248,10 +248,10 @@ Logger::Logger(uint32_t baud_rate) : baud_rate_(baud_rate) {
#endif
}
#if defined(USE_ESPHOME_TASK_LOG_BUFFER) || defined(USE_LOGGER_ZEPHYR_CDC_LOOP)
#if defined(USE_ESPHOME_TASK_LOG_BUFFER) || (defined(USE_ZEPHYR) && defined(USE_LOGGER_UART_SELECTION_USB_CDC))
void Logger::loop() {
this->process_messages_();
#ifdef USE_LOGGER_ZEPHYR_CDC_LOOP
#if defined(USE_ZEPHYR) && defined(USE_LOGGER_UART_SELECTION_USB_CDC)
this->cdc_loop_();
#endif
}
@@ -278,7 +278,7 @@ void Logger::process_messages_() {
}
}
// Zephyr with USB CDC keeps the loop running for cdc_loop_()
#ifndef USE_LOGGER_ZEPHYR_CDC_LOOP
#if !(defined(USE_ZEPHYR) && defined(USE_LOGGER_UART_SELECTION_USB_CDC))
else {
// A concurrent enable_loop_soon_any_context() still wakes the next iteration
this->disable_loop();
@@ -371,25 +371,6 @@ static const LogString *get_log_level_str(uint8_t level) {
return LogLevelStrings::get_log_str(level, LogLevelStrings::LAST_INDEX);
}
#ifndef USE_HOST
const LogString *Logger::get_uart_selection_() {
#ifdef USE_LOGGER_UART_SELECTION_DEFAULT
// LibreTiny resolves DEFAULT to the board's port only when serial logging is on
if (this->baud_rate_ > 0) {
switch (this->get_uart()) {
case UART_SELECTION_UART0:
return LOG_STR("UART0");
case UART_SELECTION_UART1:
return LOG_STR("UART1");
default:
return LOG_STR("UART2");
}
}
#endif
return LOG_STR(ESPHOME_LOGGER_UART_NAME);
}
#endif
void Logger::dump_config() {
ESP_LOGCONFIG(TAG,
"Logger:\n"
+10 -35
View File
@@ -124,9 +124,6 @@ enum UARTSelection : uint8_t {
UART_SELECTION_UART0_SWAP,
#endif // USE_ESP8266
};
// The port chosen by hardware_uart, fixed at build time
static constexpr UARTSelection CONFIGURED_UART_SELECTION = ESPHOME_LOGGER_UART_SELECTION;
#endif // USE_ESP32 || USE_ESP8266 || USE_RP2 || USE_LIBRETINY || USE_ZEPHYR
/**
@@ -149,7 +146,7 @@ static constexpr UARTSelection CONFIGURED_UART_SELECTION = ESPHOME_LOGGER_UART_S
class Logger final : public Component {
public:
explicit Logger(uint32_t baud_rate);
#if defined(USE_ESPHOME_TASK_LOG_BUFFER) || defined(USE_LOGGER_ZEPHYR_CDC_LOOP)
#if defined(USE_ESPHOME_TASK_LOG_BUFFER) || (defined(USE_ZEPHYR) && defined(USE_LOGGER_UART_SELECTION_USB_CDC))
void loop() override;
#endif
#if defined(USE_RP2_CRASH_HANDLER) && defined(USE_LOGGER_UART_SELECTION_USB_CDC)
@@ -163,11 +160,11 @@ class Logger final : public Component {
#endif
#ifdef USE_ESP32
/// UART_NUM_0 when logging to USB
constexpr uart_port_t get_uart_num() const {
uart_port_t get_uart_num() const {
#if defined(USE_LOGGER_UART_SELECTION_USB_CDC) || defined(USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG)
return UART_NUM_0;
#else
return static_cast<uart_port_t>(CONFIGURED_UART_SELECTION);
return static_cast<uart_port_t>(this->uart_);
#endif
}
#endif
@@ -175,35 +172,9 @@ class Logger final : public Component {
void create_pthread_key() { pthread_key_create(&this->log_recursion_key_, nullptr); }
#endif
#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2) || defined(USE_LIBRETINY) || defined(USE_ZEPHYR)
void set_uart_selection(UARTSelection uart_selection) { this->uart_ = uart_selection; }
/// Get the UART used by the logger.
#ifdef USE_LIBRETINY
// DEFAULT resolves to the board's default port
constexpr UARTSelection get_uart() const {
return CONFIGURED_UART_SELECTION == UART_SELECTION_DEFAULT ? static_cast<UARTSelection>(LT_UART_DEFAULT_SERIAL + 1)
: CONFIGURED_UART_SELECTION;
}
#else
constexpr UARTSelection get_uart() const { return CONFIGURED_UART_SELECTION; }
#endif
#endif
#ifdef USE_LOGGER_CONSOLE
// Raw bytes on the console port, without log framing; request with logger.request_console()
// console_write() returns the bytes written: a UART write blocks until all are queued, but a USB write can stop
// short when the host is not reading (USB Serial/JTAG gives up after 20 ms)
#if defined(USE_ARDUINO) && !defined(USE_ESP32)
size_t console_write(const uint8_t *data, size_t len) { return this->hw_serial_->write(data, len); }
bool console_read(uint8_t &byte) {
int c = this->hw_serial_->read();
if (c < 0)
return false;
byte = c;
return true;
}
#elif defined(USE_ESP32)
size_t console_write(const uint8_t *data, size_t len);
/// Non-blocking read of one byte; false if none is waiting.
bool console_read(uint8_t &byte);
#endif
UARTSelection get_uart() const { return this->uart_; }
#endif
/// Set the default log level for this logger.
@@ -280,7 +251,7 @@ class Logger final : public Component {
void log_vprintf_non_main_thread_(uint8_t level, const char *tag, int line, const char *format, va_list args,
const char *thread_name);
#endif
#ifdef USE_LOGGER_ZEPHYR_CDC_LOOP
#if defined(USE_ZEPHYR) && defined(USE_LOGGER_UART_SELECTION_USB_CDC)
void cdc_loop_();
#endif
void process_messages_();
@@ -440,6 +411,10 @@ class Logger final : public Component {
bool boot_log_done_{false}; // Set on first replay; stops further capture
#endif
uint8_t current_level_{ESPHOME_LOG_LEVEL_VERY_VERBOSE};
#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2) || defined(USE_LIBRETINY) || defined(USE_ZEPHYR)
// 0 is UART0, or DEFAULT on LibreTiny; must match cpp_default_uart in __init__.py
UARTSelection uart_{};
#endif
bool main_task_recursion_guard_{false}; // Guards tx_buffer_ on the main loop
#ifdef USE_LIBRETINY
bool non_main_task_recursion_guard_{false}; // Shared guard for all non-main tasks on LibreTiny
+38 -36
View File
@@ -17,10 +17,6 @@
#include <driver/usb_serial_jtag_vfs.h>
#endif
#endif
// The logger accepts USB_CDC on targets without USB OTG (C3, C6, H2, ...), where IDF has no CDC console
#if defined(USE_LOGGER_CONSOLE) && defined(USE_LOGGER_UART_SELECTION_USB_CDC) && defined(CONFIG_ESP_CONSOLE_USB_CDC)
#include <esp_private/usb_console.h>
#endif
#if defined(CONFIG_PM_ENABLE) && defined(CONFIG_FREERTOS_USE_TICKLESS_IDLE) && \
(ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(6, 0, 0))
#include "esp_sleep.h"
@@ -77,7 +73,6 @@ static void init_usb_serial_jtag() {
}
#endif
#if !defined(USE_LOGGER_UART_SELECTION_USB_CDC) && !defined(USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG)
static void init_uart(uart_port_t uart_num, uint32_t baud_rate, int tx_buffer_size) {
uart_config_t uart_config{};
uart_config.baud_rate = (int) baud_rate;
@@ -102,7 +97,6 @@ static void init_uart(uart_port_t uart_num, uint32_t baud_rate, int tx_buffer_si
esp_sleep_set_console_uart_handling_mode(ESP_SLEEP_ALWAYS_FLUSH_UART);
#endif
}
#endif
// get_uart_num() and pre_setup() cast the selection straight to a port
static_assert(static_cast<int>(UART_SELECTION_UART0) == static_cast<int>(UART_NUM_0) &&
@@ -113,11 +107,26 @@ static_assert(static_cast<int>(UART_SELECTION_UART2) == static_cast<int>(UART_NU
void Logger::pre_setup() {
if (this->baud_rate_ > 0) {
#ifdef USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG
init_usb_serial_jtag();
#elif !defined(USE_LOGGER_UART_SELECTION_USB_CDC)
init_uart(this->get_uart_num(), this->baud_rate_, ESPHOME_LOGGER_TX_BUFFER_SIZE);
switch (this->uart_) {
case UART_SELECTION_UART0:
case UART_SELECTION_UART1:
#ifdef USE_ESP32_VARIANT_ESP32
case UART_SELECTION_UART2:
#endif
init_uart(static_cast<uart_port_t>(this->uart_), this->baud_rate_, ESPHOME_LOGGER_TX_BUFFER_SIZE);
break;
#ifdef USE_LOGGER_USB_CDC
case UART_SELECTION_USB_CDC:
break;
#endif
#ifdef USE_LOGGER_USB_SERIAL_JTAG
case UART_SELECTION_USB_SERIAL_JTAG:
#ifdef USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG
init_usb_serial_jtag();
#endif
break;
#endif
}
}
global_logger = this;
@@ -129,36 +138,29 @@ void Logger::pre_setup() {
#endif
}
#ifdef USE_LOGGER_CONSOLE
size_t Logger::console_write(const uint8_t *data, size_t len) {
int written = 0;
#if defined(USE_LOGGER_UART_SELECTION_USB_CDC)
#ifdef CONFIG_ESP_CONSOLE_USB_CDC // keep: not set without USB OTG, see the include above
written = esp_usb_console_write_buf(reinterpret_cast<const char *>(data), len);
const LogString *Logger::get_uart_selection_() {
switch (this->uart_) {
case UART_SELECTION_UART0:
return LOG_STR("UART0");
case UART_SELECTION_UART1:
return LOG_STR("UART1");
#ifdef USE_ESP32_VARIANT_ESP32
case UART_SELECTION_UART2:
return LOG_STR("UART2");
#endif
#elif defined(USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG)
written = usb_serial_jtag_write_bytes(data, len, pdMS_TO_TICKS(20));
#else
written = uart_write_bytes(this->get_uart_num(), data, len);
#ifdef USE_LOGGER_USB_CDC
case UART_SELECTION_USB_CDC:
return LOG_STR("USB_CDC");
#endif
return written > 0 ? written : 0;
#ifdef USE_LOGGER_USB_SERIAL_JTAG
case UART_SELECTION_USB_SERIAL_JTAG:
return LOG_STR("USB_SERIAL_JTAG");
#endif
default:
return LOG_STR("UNKNOWN");
}
}
bool Logger::console_read(uint8_t &byte) {
#if defined(USE_LOGGER_UART_SELECTION_USB_CDC)
#ifdef CONFIG_ESP_CONSOLE_USB_CDC // keep: not set without USB OTG, see the include above
return esp_usb_console_available_for_read() && esp_usb_console_read_buf(reinterpret_cast<char *>(&byte), 1) == 1;
#else
return false;
#endif
#elif defined(USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG)
return usb_serial_jtag_read_bytes(&byte, 1, 0) > 0;
#else
return uart_read_bytes(this->get_uart_num(), &byte, 1, 0) > 0;
#endif
}
#endif
#ifdef USE_CRASH_HANDLER
bool crash_log_pending() { return esp32::crash_handler_has_data(); }
void log_crash_to_client() {
+16 -3
View File
@@ -14,9 +14,9 @@ void Logger::pre_setup() {
#if defined(USE_ESP8266_LOGGER_SERIAL)
this->hw_serial_ = &Serial;
Serial.begin(this->baud_rate_);
#ifdef USE_LOGGER_UART_SELECTION_UART0_SWAP
Serial.swap();
#endif
if (this->uart_ == UART_SELECTION_UART0_SWAP) {
Serial.swap();
}
Serial.setDebugOutput(ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_VERBOSE);
#elif defined(USE_ESP8266_LOGGER_SERIAL1)
this->hw_serial_ = &Serial1;
@@ -35,6 +35,19 @@ void Logger::pre_setup() {
#endif
}
const LogString *Logger::get_uart_selection_() {
#if defined(USE_ESP8266_LOGGER_SERIAL)
if (this->uart_ == UART_SELECTION_UART0_SWAP) {
return LOG_STR("UART0_SWAP");
}
return LOG_STR("UART0");
#elif defined(USE_ESP8266_LOGGER_SERIAL1)
return LOG_STR("UART1");
#else
return LOG_STR("NONE");
#endif
}
#ifdef USE_CRASH_HANDLER
bool crash_log_pending() { return esp8266::crash_handler_has_data(); }
void log_crash_to_client() { esp8266::crash_handler_log(); }
+1 -1
View File
@@ -9,7 +9,7 @@ void HOT Logger::write_msg_(const char *msg, uint16_t len) {
char buffer[TIMESTAMP_LEN + ESPHOME_LOGGER_TX_BUFFER_SIZE + HEADROOM];
time_t rawtime;
time(&rawtime);
::time(&rawtime);
struct tm timeinfo;
localtime_r(&rawtime, &timeinfo); // Thread-safe version
size_t pos = strftime(buffer, TIMESTAMP_LEN + 1, "[%H:%M:%S]", &timeinfo);
+51 -20
View File
@@ -12,28 +12,45 @@ ESPHOME_LOG_TAG(TAG, "logger");
void Logger::pre_setup() {
if (this->baud_rate_ > 0) {
#if defined(USE_LOGGER_UART_SELECTION_UART0) && LT_HW_UART0
this->hw_serial_ = &Serial0;
libretiny::ensure_serial_handle(0);
Serial0.begin(this->baud_rate_);
#elif defined(USE_LOGGER_UART_SELECTION_UART1) && LT_HW_UART1
this->hw_serial_ = &Serial1;
libretiny::ensure_serial_handle(1);
Serial1.begin(this->baud_rate_);
#elif defined(USE_LOGGER_UART_SELECTION_UART2) && LT_HW_UART2
this->hw_serial_ = &Serial2;
libretiny::ensure_serial_handle(2);
Serial2.begin(this->baud_rate_);
#else
this->hw_serial_ = &Serial;
Serial.begin(this->baud_rate_);
if (CONFIGURED_UART_SELECTION != UART_SELECTION_DEFAULT) {
ESP_LOGW(TAG, " The chosen logger UART port is not available on this board."
"The default port was used instead.");
}
switch (this->uart_) {
#if LT_HW_UART0
case UART_SELECTION_UART0:
this->hw_serial_ = &Serial0;
libretiny::ensure_serial_handle(0);
Serial0.begin(this->baud_rate_);
break;
#endif
#if LT_HW_UART1
case UART_SELECTION_UART1:
this->hw_serial_ = &Serial1;
libretiny::ensure_serial_handle(1);
Serial1.begin(this->baud_rate_);
break;
#endif
#if LT_HW_UART2
case UART_SELECTION_UART2:
this->hw_serial_ = &Serial2;
libretiny::ensure_serial_handle(2);
Serial2.begin(this->baud_rate_);
break;
#endif
default:
this->hw_serial_ = &Serial;
Serial.begin(this->baud_rate_);
if (this->uart_ != UART_SELECTION_DEFAULT) {
ESP_LOGW(TAG, " The chosen logger UART port is not available on this board."
"The default port was used instead.");
}
break;
}
// change lt_log() port to match default Serial
lt_log_set_port(this->get_uart() - 1);
if (this->uart_ == UART_SELECTION_DEFAULT) {
this->uart_ = (UARTSelection) (LT_UART_DEFAULT_SERIAL + 1);
lt_log_set_port(LT_UART_DEFAULT_SERIAL);
} else {
lt_log_set_port(this->uart_ - 1);
}
}
global_logger = this;
@@ -43,6 +60,20 @@ void Logger::pre_setup() {
#endif
}
const LogString *Logger::get_uart_selection_() {
switch (this->uart_) {
case UART_SELECTION_DEFAULT:
return LOG_STR("DEFAULT");
case UART_SELECTION_UART0:
return LOG_STR("UART0");
case UART_SELECTION_UART1:
return LOG_STR("UART1");
case UART_SELECTION_UART2:
default:
return LOG_STR("UART2");
}
}
#ifdef USE_LIBRETINY_CRASH_HANDLER
bool crash_log_pending() { return libretiny::crash_handler_has_data(); }
void log_crash_to_client() { libretiny::crash_handler_log(); }
+27 -10
View File
@@ -26,16 +26,20 @@ void Logger::setup() {
void Logger::pre_setup() {
if (this->baud_rate_ > 0) {
#if defined(USE_LOGGER_UART_SELECTION_USB_CDC)
this->hw_serial_ = &Serial;
Serial.begin(this->baud_rate_);
#elif defined(USE_LOGGER_UART_SELECTION_UART1)
this->hw_serial_ = &Serial2;
Serial2.begin(this->baud_rate_);
#else
this->hw_serial_ = &Serial1;
Serial1.begin(this->baud_rate_);
#endif
switch (this->uart_) {
case UART_SELECTION_UART0:
this->hw_serial_ = &Serial1;
Serial1.begin(this->baud_rate_);
break;
case UART_SELECTION_UART1:
this->hw_serial_ = &Serial2;
Serial2.begin(this->baud_rate_);
break;
case UART_SELECTION_USB_CDC:
this->hw_serial_ = &Serial;
Serial.begin(this->baud_rate_);
break;
}
}
global_logger = this;
ESP_LOGI(TAG, "Log initialized");
@@ -45,6 +49,19 @@ void Logger::pre_setup() {
#endif
}
const LogString *Logger::get_uart_selection_() {
switch (this->uart_) {
case UART_SELECTION_UART0:
return LOG_STR("UART0");
case UART_SELECTION_UART1:
return LOG_STR("UART1");
case UART_SELECTION_USB_CDC:
return LOG_STR("USB_CDC");
default:
return LOG_STR("UNKNOWN");
}
}
#ifdef USE_CRASH_HANDLER
bool crash_log_pending() { return rp2::crash_handler_has_data(); }
void log_crash_to_client() { rp2::crash_handler_log(); }
+34 -13
View File
@@ -42,7 +42,7 @@ __attribute__((section(".noinit"))) struct {
ESPHOME_LOG_TAG(TAG, "logger");
#ifdef USE_LOGGER_ZEPHYR_CDC_LOOP
#ifdef USE_LOGGER_UART_SELECTION_USB_CDC
void Logger::cdc_loop_() {
if (this->uart_dev_ == nullptr) {
return;
@@ -75,19 +75,25 @@ void Logger::pre_setup() {
#ifdef CONFIG_SERIAL
if (this->baud_rate_ > 0) {
const struct device *uart_dev = nullptr;
#if defined(USE_LOGGER_UART_SELECTION_USB_CDC)
switch (this->uart_) {
case UART_SELECTION_UART0: // NOLINT(bugprone-branch-clone)
uart_dev = DEVICE_DT_GET_OR_NULL(DT_NODELABEL(ESPHOME_LOGGER_UART0_NODE));
break;
case UART_SELECTION_UART1:
uart_dev = DEVICE_DT_GET_OR_NULL(DT_NODELABEL(uart1));
break;
#ifdef USE_LOGGER_USB_CDC
case UART_SELECTION_USB_CDC:
#if defined(CONFIG_USB_DEVICE_STACK) || defined(CONFIG_USB_DEVICE_STACK_NEXT)
uart_dev = DEVICE_DT_GET_OR_NULL(DT_NODELABEL(cdc_acm_uart0));
if (device_is_ready(uart_dev)) {
// Nothing can log this early, and the logger has no output without USB anyway
zephyr::usb_device_enable();
uart_dev = DEVICE_DT_GET_OR_NULL(DT_NODELABEL(cdc_acm_uart0));
if (device_is_ready(uart_dev)) {
// Nothing can log this early, and the logger has no output without USB anyway
zephyr::usb_device_enable();
}
#endif
break;
#endif
}
#endif
#elif defined(USE_LOGGER_UART_SELECTION_UART1)
uart_dev = DEVICE_DT_GET_OR_NULL(DT_NODELABEL(uart1));
#else
uart_dev = DEVICE_DT_GET_OR_NULL(DT_NODELABEL(ESPHOME_LOGGER_UART0_NODE));
#endif
if (device_is_ready(uart_dev)) {
this->uart_dev_ = uart_dev;
#if defined(USE_LOGGER_WAIT_FOR_CDC) && defined(USE_LOGGER_UART_SELECTION_USB_CDC)
@@ -111,7 +117,7 @@ void Logger::pre_setup() {
this->dump_crash_();
#endif
// Nobody reads a USB port this early; cdc_loop_() reports the dump once the port is opened
#if defined(USE_CRASH_HANDLER) && !defined(USE_LOGGER_ZEPHYR_CDC_LOOP)
#if defined(USE_CRASH_HANDLER) && !defined(USE_LOGGER_UART_SELECTION_USB_CDC)
// Without a UART (baud_rate: 0, or one that did not come up) nothing reaches the console
if (this->uart_dev_ != nullptr)
log_crash_to_client();
@@ -133,6 +139,21 @@ void HOT Logger::write_msg_(const char *msg, uint16_t len) {
}
}
const LogString *Logger::get_uart_selection_() {
switch (this->uart_) {
case UART_SELECTION_UART0:
return LOG_STR("UART0");
case UART_SELECTION_UART1:
return LOG_STR("UART1");
#ifdef USE_LOGGER_USB_CDC
case UART_SELECTION_USB_CDC:
return LOG_STR("USB_CDC");
#endif
default:
return LOG_STR("UNKNOWN");
}
}
static constexpr uint8_t REASON_BUF_SIZE = 32;
static const char *reason_to_str(unsigned int reason, char *buf) {
+165
View File
@@ -0,0 +1,165 @@
#include "at_reply.h"
#include <cctype>
#include <cstdlib>
#include <cstring>
#include <strings.h>
namespace esphome::modem {
bool collect_reply(char *buf, size_t size, size_t &len, const char *data, size_t data_len, bool whole) {
const size_t capacity = size - 1;
if (whole) {
len = 0;
}
bool dropped = false;
if (data_len > capacity) {
memcpy(buf, data + data_len - capacity, capacity);
len = capacity;
dropped = true;
} else {
if (len + data_len > capacity) {
const size_t drop = len + data_len - capacity;
memmove(buf, buf + drop, len - drop);
len -= drop;
dropped = true;
}
memcpy(buf + len, data, data_len);
len += data_len;
}
buf[len] = '\0';
return dropped;
}
ReplyEnd reply_end(const char *data, size_t len, bool skip_first) {
const char *end = data + len;
const char *line = data;
if (skip_first) {
const auto *newline = static_cast<const char *>(memchr(data, '\n', len));
line = newline != nullptr ? newline + 1 : end;
}
while (line < end) {
const auto *newline = static_cast<const char *>(memchr(line, '\n', end - line));
if (newline == nullptr) {
break; // the line has not ended yet
}
size_t size = newline - line;
if (size != 0 && line[size - 1] == '\r') {
size--;
}
if (size == 2 && memcmp(line, "OK", 2) == 0) {
return ReplyEnd::REPLY_END_OK;
}
// esp_modem drops a CMUX frame without a line end, so the ": <reason>" part may be missing
if ((size == 5 && memcmp(line, "ERROR", 5) == 0) || (size >= 10 && memcmp(line, "+CME ERROR", 10) == 0) ||
(size >= 10 && memcmp(line, "+CMS ERROR", 10) == 0)) {
return ReplyEnd::REPLY_END_ERROR;
}
line = newline + 1;
}
return ReplyEnd::REPLY_END_NONE;
}
size_t flatten_reply(char *reply, size_t len) {
for (size_t i = 0; i < len; i++) {
if (reply[i] == '\r' || reply[i] == '\n') {
reply[i] = ' ';
}
}
while (len != 0 && reply[len - 1] == ' ') {
len--;
}
if (len >= 2 && memcmp(reply + len - 2, "OK", 2) == 0 && (len == 2 || reply[len - 3] == ' ')) {
len -= 2;
while (len != 0 && reply[len - 1] == ' ') {
len--;
}
}
size_t start = 0;
while (start < len && reply[start] == ' ') {
start++;
}
len -= start;
memmove(reply, reply + start, len);
reply[len] = '\0';
return len;
}
int registration_from_reply(const char *reply, const char *prefix) {
const size_t prefix_len = strlen(prefix);
for (const char *line = strstr(reply, prefix); line != nullptr; line = strstr(line + 1, prefix)) {
const char *start = line + prefix_len;
char *end = nullptr;
strtol(start, &end, 10);
if (end == start || *end != ',') {
continue;
}
start = end + 1;
const auto stat = static_cast<int32_t>(strtol(start, &end, 10));
if (end != start) {
return stat;
}
}
return REGISTRATION_UNKNOWN;
}
int merge_registration(int lte, int legacy) {
// A multimode modem can be registered or still searching on one network type while the other refuses it
if (is_registered(lte)) {
return lte;
}
if (is_registered(legacy)) {
return legacy;
}
// A definite answer from one query outweighs a timeout of the other
if (lte == REGISTRATION_SEARCHING || legacy == REGISTRATION_SEARCHING) {
return REGISTRATION_SEARCHING;
}
if (lte == REGISTRATION_DENIED || legacy == REGISTRATION_DENIED) {
return REGISTRATION_DENIED;
}
if (lte >= 0 || legacy >= 0) {
return lte >= 0 ? lte : legacy;
}
if (lte == REGISTRATION_NO_ANSWER || legacy == REGISTRATION_NO_ANSWER) {
return REGISTRATION_NO_ANSWER;
}
if (lte == REGISTRATION_UNSUPPORTED && legacy == REGISTRATION_UNSUPPORTED) {
return REGISTRATION_UNSUPPORTED;
}
return REGISTRATION_UNKNOWN;
}
bool reply_names_unsupported(const char *reply) {
static constexpr char PREFIX[] = "+CME ERROR:";
static constexpr char TEXT[] = "operation not supported";
const char *code = strstr(reply, PREFIX);
if (code == nullptr) {
return false;
}
code += sizeof(PREFIX) - 1;
while (*code == ' ') {
code++;
}
return strncasecmp(code, TEXT, sizeof(TEXT) - 1) == 0 || (code[0] == '4' && !isdigit(code[1]));
}
const char *sim_status(char *reply) {
static constexpr char PREFIX[] = "+CPIN:";
char *status = strstr(reply, PREFIX);
if (status == nullptr) {
return nullptr;
}
status += sizeof(PREFIX) - 1;
while (*status == ' ') {
status++;
}
// A URC in the same reply follows on its own line, which flatten_reply() turned into two spaces
char *end = strstr(status, " ");
if (end != nullptr) {
*end = '\0';
}
return status;
}
} // namespace esphome::modem
+67
View File
@@ -0,0 +1,67 @@
#pragma once
#include <cstddef>
#include <cstdint>
// Parsers for raw AT replies; free of esp_modem so they build and run in host unit tests
namespace esphome::modem {
enum class ReplyEnd : uint8_t {
REPLY_END_NONE, // no complete final result line yet
REPLY_END_OK, // an OK line
REPLY_END_ERROR, // an ERROR, +CME ERROR: or +CMS ERROR: line
};
// AT+CEREG? and AT+CREG? <stat> values (3GPP TS 27.007)
static constexpr int REGISTRATION_NOT_SEARCHING = 0;
static constexpr int REGISTRATION_HOME = 1;
static constexpr int REGISTRATION_SEARCHING = 2;
static constexpr int REGISTRATION_DENIED = 3;
static constexpr int REGISTRATION_REPORTED_UNKNOWN = 4;
static constexpr int REGISTRATION_ROAMING = 5;
static constexpr int REGISTRATION_SMS_ONLY_HOME = 6;
static constexpr int REGISTRATION_SMS_ONLY_ROAMING = 7;
static constexpr int REGISTRATION_EMERGENCY_ONLY = 8;
static constexpr int REGISTRATION_CSFB_NOT_PREFERRED_HOME = 9;
static constexpr int REGISTRATION_CSFB_NOT_PREFERRED_ROAMING = 10;
// Results beyond the 3GPP values
static constexpr int REGISTRATION_UNKNOWN = -1; // no readable answer
static constexpr int REGISTRATION_UNSUPPORTED = -2; // the query is not supported
static constexpr int REGISTRATION_NO_ANSWER = -3; // the query timed out
/// Registered on a network, so the data attach can be requested. SMS only and "CSFB not preferred" limit the
/// circuit switched side, not the packet data attach; emergency only (8) is not a registration.
inline bool is_registered(int registration) {
return registration == REGISTRATION_HOME || registration == REGISTRATION_ROAMING ||
(registration >= REGISTRATION_SMS_ONLY_HOME && registration <= REGISTRATION_SMS_ONLY_ROAMING) ||
(registration >= REGISTRATION_CSFB_NOT_PREFERRED_HOME &&
registration <= REGISTRATION_CSFB_NOT_PREFERRED_ROAMING);
}
/// Add data to the reply in buf (size includes the terminator, len is the current length). With whole, data is
/// everything received so far (UART) and replaces the reply; otherwise it is one new CMUX frame and is appended. A
/// reply longer than the buffer keeps its newest bytes, where the final line is. Returns true when bytes were dropped.
bool collect_reply(char *buf, size_t size, size_t &len, const char *data, size_t data_len, bool whole);
/// How the reply ends. Only a complete final result line counts, so ERROR inside a payload line does not; a +CME ERROR
/// line counts even without its reason, which a dropped CMUX frame can take away. With
/// skip_first, the first line is a cut-off fragment and is ignored.
ReplyEnd reply_end(const char *data, size_t len, bool skip_first);
/// Puts a raw reply on one line for the log and drops the final OK; returns the new length
size_t flatten_reply(char *reply, size_t len);
/// The <stat> after the first comma of the "<n>,<stat>" line starting with prefix (+CREG: and friends), or
/// REGISTRATION_UNKNOWN; a one-field line is an unsolicited notification and is skipped
int registration_from_reply(const char *reply, const char *prefix);
/// The state that tells most from the AT+CEREG? (LTE) and AT+CREG? (2G and 3G) results
int merge_registration(int lte, int legacy);
/// Whether an error reply says the command is not supported (+CME ERROR: 4 or its verbose text)
bool reply_names_unsupported(const char *reply);
/// The SIM status in a flattened AT+CPIN? reply, cut before any following line, or nullptr
const char *sim_status(char *reply);
} // namespace esphome::modem
+296 -47
View File
@@ -1,5 +1,6 @@
#ifdef USE_ESP32
#include "modem_component.h"
#include "at_reply.h"
#include "soc/soc_caps.h"
#include <driver/uart.h>
@@ -42,6 +43,14 @@ static constexpr uint32_t PROBE_TIMEOUT_MS = 100;
// A silent modem is not going to answer the next second, so its probes are spaced out, doubling up to a minute
static constexpr uint32_t PROBE_RETRY_DELAY_MS = 5000;
static constexpr uint32_t PROBE_RETRY_MAX_MS = 60000;
// A modem in command mode answers the ATE0 sent before the mode detection within this time
static constexpr uint32_t ECHO_OFF_TIMEOUT_MS = 100;
// The +++ escape needs a second of silence before it; esp_modem waits for the answer after it
static constexpr uint32_t ESCAPE_GUARD_MS = 1100;
// A SIM7670 left in CMUX by an ESP reset ignores every frame until this many flag bytes overflow its receive buffer;
// it then reinitialises its AT channel within about 2 s
static constexpr size_t CMUX_FLUSH_BYTES = 4096;
static constexpr uint32_t CMUX_FLUSH_SETTLE_MS = 3000;
// How long the task waits for the main loop to run on_sync before attaching
static constexpr uint32_t SYNC_ACK_TIMEOUT_MS = 5000;
// esp_modem's command strings and the log lines are built on this stack
@@ -56,6 +65,12 @@ static constexpr uint8_t PIN_MAX_UNCONFIRMED_SENDS = 2;
// The attachment is polled every 4 s; the signal and operator queries only every 4th poll
static constexpr uint32_t ATTACH_POLL_MS = 4000;
static constexpr uint8_t ATTACH_DIAG_EVERY = 4;
static constexpr uint8_t ATTACH_UNKNOWN_POLLS = 15; // about a minute of polls
// AT+CGATT=1: SIMCom documents up to 75 s, but a SIM7080G that is not registered yet held it for 141 s
static constexpr uint32_t ATTACH_TIMEOUT_MS = 150000;
// SIM status polls that fail before a warning, and between repeats of it
static constexpr uint8_t SIM_WARN_AFTER = 10;
static constexpr uint8_t SIM_WARN_EVERY = 60;
static constexpr int RADIO_STATE_MINIMUM = 0; // CFUN=0: radio off and the SIM powered down
static constexpr int RADIO_STATE_RF_OFF = 4; // CFUN=4: transmit and receive off, SIM still powered
static constexpr uint8_t UART_EVENT_QUEUE_SIZE = 10;
@@ -73,8 +88,22 @@ static const LogString *state_to_str(ModemState state) {
// Indexed by ModemFault
PROGMEM_STRING_TABLE(ModemFaultStrings, "", "Modem not responding", "Configured baud rate failed",
"init_at command failed", "SIM not ready", "SIM locked", "SIM PIN not sent; check pin_code",
"PIN record not saved", "APN or radio setup failed", "No network attachment", "PPP link failed",
"Modem teardown failed");
"PIN record not saved", "APN or radio setup failed", "No network attachment",
"Network registration denied", "PPP link failed", "Modem teardown failed");
// Indexed by the AT+CEREG? <stat> value
PROGMEM_STRING_TABLE(RegistrationStrings, "not searching", "registered", "searching", "denied", "unknown", "roaming",
"registered for SMS only", "roaming for SMS only", "emergency only",
"registered, CSFB not preferred", "roaming, CSFB not preferred", "other");
static const LogString *registration_to_str(int registration) {
if (registration == REGISTRATION_UNSUPPORTED) {
return LOG_STR("not supported");
}
if (registration < 0) {
return LOG_STR("not reported");
}
return RegistrationStrings::get_log_str(static_cast<uint8_t>(registration), RegistrationStrings::LAST_INDEX);
}
// Indexed by esp_modem::command_result
PROGMEM_STRING_TABLE(CommandResultStrings, "OK", "FAIL", "TIMEOUT");
@@ -586,6 +615,9 @@ ModemState ModemComponent::compute_next_state_() {
}
ModemState ModemComponent::handle_state_enabling_() {
// With echo on (SIM7670G after power-up), the modem sends esp_modem's PPP probe back and the detection takes it for
// a PPP reply; in PPP or CMUX these bytes are dropped as a bad frame
this->at_reply_("ATE0", ECHO_OFF_TIMEOUT_MS);
// Find the baud rate the modem answers at and leave it in command mode, synced
if (!this->dce_->set_mode(modem_mode::AUTODETECT)) {
// A failed detection keeps the previous mode, which would skip the baud rate search below
@@ -611,21 +643,18 @@ ModemState ModemComponent::handle_state_enabling_() {
exited = false;
const int bauds[] = {this->restored_baud_, this->baud_rate_, FALLBACK_BAUD_RATE};
bool found = false;
bool probed = false;
bool rejected = false;
for (size_t i = 0; i != std::size(bauds) && !found; i++) {
const int baud = bauds[i];
if (baud == 0 || baud == detected || std::find(bauds, bauds + i, baud) != bauds + i) {
continue;
}
if (uart_set_baudrate(static_cast<uart_port_t>(this->uart_port_), baud) != ESP_OK) {
if (this->set_uart_baud_(baud) != ESP_OK) {
ESP_LOGW(TAG, "UART rejected baud rate %d", baud);
this->set_fault_(ModemFault::MODEM_FAULT_BAUD);
rejected = true;
continue;
}
this->current_baud_rate_ = baud;
probed = true;
std::string output;
found = this->dce_->at("AT", output, PROBE_TIMEOUT_MS) == command_result::OK;
if (!found) {
@@ -633,11 +662,31 @@ ModemState ModemComponent::handle_state_enabling_() {
}
}
if (!found) {
// The detection at the current rate already failed; a UART that refused every other rate set BAUD
if (!probed && !rejected) {
// A modem left in data mode before PPP started, or stuck in CMUX, answers none of the probes; both recoveries
// go out at the rate the detection used
if (this->current_baud_rate_ != detected) {
const esp_err_t err = this->set_uart_baud_(detected);
if (err != ESP_OK) {
ESP_LOGW(TAG, "UART rejected baud rate %d (%s); data mode and CMUX recovery skipped", detected,
esp_err_to_name(err));
this->set_fault_(ModemFault::MODEM_FAULT_BAUD);
rejected = true;
}
}
// The escape before the flush is what a stuck SIM7670G responds to; the order is measured, not arbitrary
if (this->current_baud_rate_ == detected && (this->escape_data_mode_() || this->flush_cmux_())) {
exited = true;
break;
}
// A UART that refused a rate set BAUD
if (!rejected) {
this->not_responding_(detected);
}
return this->retry_(ModemState::MODEM_STATE_ENABLING, this->next_probe_delay_());
const uint32_t delay_ms = this->next_probe_delay_();
if (delay_ms == PROBE_RETRY_MAX_MS) {
this->answered_ = false; // silent for minutes, so the wiring hint applies again
}
return this->retry_(ModemState::MODEM_STATE_ENABLING, delay_ms);
}
ESP_LOGD(TAG, "Modem responded at baud %d", this->current_baud_rate_);
break;
@@ -671,10 +720,19 @@ ModemState ModemComponent::handle_state_enabling_() {
this->set_fault_(ModemFault::MODEM_FAULT_TEARDOWN);
return this->retry_(ModemState::MODEM_STATE_ENABLING, this->next_probe_delay_());
}
// The modem answers AT, so it is in command mode. A failed data mode exit leaves esp_modem's UART side in data mode,
// from where its later switch to CMUX fails at once, so its mode is set to match; this sends nothing to the modem.
if (!this->dce_->set_mode(modem_mode::RESUME_COMMAND_MODE)) {
ESP_LOGW(TAG, "esp_modem refused command mode; the switch to PPP may fail");
}
// esp_modem keeps the last line before OK as the reply, which can be the echoed command
if (this->dce_->set_echo(false) != command_result::OK) {
ESP_LOGW(TAG, "Failed to disable command echo");
}
// Verbose +CME ERROR text, so a failed command or a missing SIM says why; a modem without it keeps plain ERROR
if (this->dce_->config_mobile_termination_error(2) != command_result::OK) {
ESP_LOGW(TAG, "Modem refused verbose errors (AT+CMEE=2)");
}
// The SIM7670G only uses an APN written at CFUN=0 (else the attach fails with an ESM failure); CFUN=0 also drops a
// session left by a warm reboot. A modem that refuses gets the APN after the SIM check instead, as before.
@@ -690,6 +748,7 @@ ModemState ModemComponent::handle_state_enabling_() {
ESP_LOGW(TAG, "Failed to power the SIM up");
this->set_fault_(ModemFault::MODEM_FAULT_SETUP);
this->modem_synced_ = true; // it answers, so a disable() still tears it down
this->answered_ = true;
return this->retry_(ModemState::MODEM_STATE_ENABLING, this->next_probe_delay_());
}
this->probe_backoff_.store(0, std::memory_order_relaxed);
@@ -698,12 +757,11 @@ ModemState ModemComponent::handle_state_enabling_() {
ESP_LOGD(TAG, "Setting baud rate: %d -> %d", this->current_baud_rate_, this->baud_rate_);
if (this->dce_->set_baud(this->baud_rate_) == command_result::OK) {
delay(200); // NOLINT
if (uart_set_baudrate(static_cast<uart_port_t>(this->uart_port_), this->baud_rate_) != ESP_OK) {
if (this->set_uart_baud_(this->baud_rate_) != ESP_OK) {
ESP_LOGE(TAG, "UART rejected baud rate %d", this->baud_rate_);
this->set_fault_(ModemFault::MODEM_FAULT_BAUD);
return ModemState::MODEM_STATE_DISCONNECTING;
}
this->current_baud_rate_ = this->baud_rate_;
if (this->dce_->sync() != command_result::OK) {
ESP_LOGE(TAG, "Failed to sync modem at baud rate %d.", this->baud_rate_);
this->set_fault_(ModemFault::MODEM_FAULT_BAUD);
@@ -731,6 +789,7 @@ ModemState ModemComponent::handle_state_enabling_() {
ESP_LOGW(TAG, "Modem refused hardware flow control; UART overruns are possible");
}
this->modem_synced_ = true;
this->answered_ = true;
return ModemState::MODEM_STATE_SYNCED;
}
@@ -746,12 +805,13 @@ ModemState ModemComponent::handle_state_synced_() {
this->clear_config_fault_(ModemFault::MODEM_FAULT_INIT_AT);
}
this->connect_step_ = ConnectStep::CONNECT_STEP_START;
this->sim_polls_ = 0;
return ModemState::MODEM_STATE_CONNECTING;
}
ModemState ModemComponent::handle_state_connecting_() {
if (this->connect_step_ == ConnectStep::CONNECT_STEP_START) {
// ENABLING just synced; only a failed attachment read comes back here unsure of the modem
// ENABLING just synced; a command that timed out comes back here unsure of the modem
if (this->resync_) {
this->resync_ = false;
if (this->dce_->sync() != command_result::OK) {
@@ -792,35 +852,78 @@ ModemState ModemComponent::handle_state_connecting_() {
}
this->connect_step_ = ConnectStep::CONNECT_STEP_RADIO_ON;
this->attach_polls_ = 0;
}
if (this->connect_step_ == ConnectStep::CONNECT_STEP_RADIO_ON) {
// A modem still searching for a network refuses this; the attachment poll asks again
if (this->dce_->set_network_attachment_state(1) != command_result::OK) {
ESP_LOGD(TAG, "Network attachment request refused");
}
this->connect_step_ = ConnectStep::CONNECT_STEP_ATTACH_REQUESTED;
this->idle_polls_ = 0;
this->unknown_polls_ = 0;
}
int attached = 0;
if (this->dce_->get_network_attachment_state(attached) != command_result::OK) {
ESP_LOGW(TAG, "Failed to read the network attachment state");
this->set_fault_(ModemFault::MODEM_FAULT_NOT_ATTACHED);
this->connect_step_ = ConnectStep::CONNECT_STEP_START; // start over with a sync on the next pass
this->resync_ = true;
this->request_resync_();
return this->retry_(ModemState::MODEM_STATE_CONNECTING);
}
if (!attached) {
const int registration = this->read_registration_();
if (registration == REGISTRATION_NO_ANSWER) {
// The state is open, so the modem is checked with a sync instead
ESP_LOGW(TAG, "No answer to a registration query");
this->request_resync_();
this->set_fault_(ModemFault::MODEM_FAULT_NOT_ATTACHED);
return this->retry_(ModemState::MODEM_STATE_CONNECTING);
}
// "Not searching" for a few polls in a row means the attachment is off; right after CFUN=1 it is only brief
this->idle_polls_ = registration == REGISTRATION_NOT_SEARCHING ? static_cast<uint8_t>(this->idle_polls_ + 1) : 0;
const bool idle = this->idle_polls_ >= ATTACH_DIAG_EVERY;
// A state that cannot be read or means nothing here holds the request back only for a while
const bool unknown = registration == REGISTRATION_UNKNOWN || registration == REGISTRATION_REPORTED_UNKNOWN ||
(registration > REGISTRATION_ROAMING && !is_registered(registration));
this->unknown_polls_ = unknown ? static_cast<uint8_t>(this->unknown_polls_ + 1) : 0;
const bool unknown_too_long = this->unknown_polls_ >= ATTACH_UNKNOWN_POLLS;
if (this->connect_step_ == ConnectStep::CONNECT_STEP_RADIO_ON &&
(is_registered(registration) || registration == REGISTRATION_UNSUPPORTED || idle || unknown_too_long)) {
if (unknown_too_long) {
ESP_LOGI(TAG, "Registration state %d (%s) for %u polls; requesting the network attachment anyway", registration,
LOG_STR_ARG(registration_to_str(registration)), this->unknown_polls_);
this->unknown_polls_ = 0;
}
// Before registration a modem can hold the AT channel on this for minutes and drop every command meanwhile,
// so it waits for one; the fallbacks above send it anyway, and ATTACH_TIMEOUT_MS covers that hold
const command_result attach = this->at_reply_("AT+CGATT=1", ATTACH_TIMEOUT_MS);
if (attach == command_result::TIMEOUT) {
ESP_LOGW(TAG, "No answer to the network attachment request");
this->set_fault_(ModemFault::MODEM_FAULT_NOT_ATTACHED);
this->request_resync_();
return this->retry_(ModemState::MODEM_STATE_CONNECTING);
}
if (attach != command_result::OK) {
ESP_LOGW(TAG, "Network attachment request refused: %s", this->reply_);
}
this->connect_step_ = ConnectStep::CONNECT_STEP_ATTACH_REQUESTED;
return this->retry_(ModemState::MODEM_STATE_CONNECTING);
}
if (this->attach_polls_++ % ATTACH_DIAG_EVERY == 0) {
int rssi = 99, ber = 99, registration = -1, mode = -1; // -1 stays when the query fails
this->dce_->get_network_registration_state(registration);
int rssi = 99, ber = 99, mode = -1; // -1 stays when the query fails
this->dce_->get_signal_quality(rssi, ber);
this->dce_->get_network_system_mode(mode);
ESP_LOGW(TAG, "Modem not attached yet: registration %d, network type %d, CSQ %d, BER %d", registration, mode,
rssi, ber);
ESP_LOGW(TAG, "Modem not attached yet: registration %d (%s), network type %d, CSQ %d, BER %d", registration,
LOG_STR_ARG(registration_to_str(registration)), mode, rssi, ber);
if (unknown) {
ESP_LOGW(TAG, "Network attachment request held back while the registration state is unknown (%u of %u polls)",
this->unknown_polls_, ATTACH_UNKNOWN_POLLS);
}
if (registration == REGISTRATION_DENIED) {
// The modem's reason tells a rejected APN (ESM failure) from a SIM the network does not serve
const command_result reason_read = this->at_reply_("AT+CEER");
ESP_LOGW(TAG,
"The network refused registration (AT+CEER %s: %s); check the APN and that the SIM's plan covers "
"this modem's network types",
LOG_STR_ARG(result_to_str(reason_read)), this->reply_);
}
this->connect_step_ = ConnectStep::CONNECT_STEP_RADIO_ON; // request the attachment again
}
this->set_fault_(ModemFault::MODEM_FAULT_NOT_ATTACHED);
this->set_fault_(registration == REGISTRATION_DENIED ? ModemFault::MODEM_FAULT_REGISTRATION_DENIED
: ModemFault::MODEM_FAULT_NOT_ATTACHED);
return this->retry_(ModemState::MODEM_STATE_CONNECTING, ATTACH_POLL_MS);
}
@@ -923,11 +1026,114 @@ void ModemComponent::transition_to_(ModemState next_state) {
}
}
esp_err_t ModemComponent::set_uart_baud_(int baud) {
const esp_err_t err = uart_set_baudrate(static_cast<uart_port_t>(this->uart_port_), baud);
if (err == ESP_OK) {
this->current_baud_rate_ = baud;
}
return err;
}
bool ModemComponent::escape_data_mode_() {
delay(ESCAPE_GUARD_MS); // NOLINT
if (this->dce_->set_command_mode() != command_result::OK) {
ESP_LOGD(TAG, "No answer after the data mode escape");
return false;
}
ESP_LOGW(TAG, "Modem was left in data mode; escaped to command mode");
return true;
}
bool ModemComponent::flush_cmux_() {
// With RTS/CTS a silent modem can hold CTS off; the flag bytes would then stay queued and block every later write
if (this->rts_pin_ != nullptr) {
ESP_LOGW(TAG, "CMUX recovery is not available with RTS/CTS flow control");
return false;
}
static constexpr uint8_t CMUX_FLAG = 0xF9;
uint8_t flags[64];
memset(flags, CMUX_FLAG, sizeof(flags));
const auto port = static_cast<uart_port_t>(this->uart_port_);
for (size_t sent = 0; sent < CMUX_FLUSH_BYTES; sent += sizeof(flags)) {
if (this->dte_->write(flags, sizeof(flags)) != static_cast<int>(sizeof(flags))) {
ESP_LOGW(TAG, "CMUX flush: short write after %u bytes", static_cast<unsigned>(sent));
return false;
}
}
// 10 bits per byte, plus a margin
const uint32_t send_ms = CMUX_FLUSH_BYTES * 10 * 1000 / this->current_baud_rate_ + 100;
if (uart_wait_tx_done(port, pdMS_TO_TICKS(send_ms)) != ESP_OK) {
ESP_LOGW(TAG, "CMUX flush: transmit not finished after %u ms", static_cast<unsigned>(send_ms));
return false;
}
delay(CMUX_FLUSH_SETTLE_MS); // NOLINT
if (this->dce_->sync() != command_result::OK) {
ESP_LOGD(TAG, "No answer after the CMUX flush");
return false;
}
ESP_LOGW(TAG, "Modem was stuck in CMUX; reset it to command mode");
return true;
}
// A command timed out: the next pass checks with a sync that the modem still answers
void ModemComponent::request_resync_() {
this->connect_step_ = ConnectStep::CONNECT_STEP_START;
this->resync_ = true;
}
// One registration query: the <stat>, REGISTRATION_UNSUPPORTED, REGISTRATION_NO_ANSWER or REGISTRATION_UNKNOWN
int ModemComponent::read_stat_(const char *cmd, const char *prefix) {
const command_result result = this->at_reply_(cmd);
if (result == command_result::TIMEOUT) {
return REGISTRATION_NO_ANSWER;
}
if (result == command_result::FAIL && reply_names_unsupported(this->reply_)) {
return REGISTRATION_UNSUPPORTED;
}
const int stat = result == command_result::OK ? registration_from_reply(this->reply_, prefix) : REGISTRATION_UNKNOWN;
if (stat == REGISTRATION_UNKNOWN) {
// An error such as a SIM failure is a warning on the diagnostic polls, so it shows at the default log level
if (result == command_result::FAIL && this->attach_polls_ % ATTACH_DIAG_EVERY == 0) {
ESP_LOGW(TAG, "%s failed: %s", cmd, this->reply_);
} else {
ESP_LOGD(TAG, "%s gave no state: %s", cmd, this->reply_);
}
}
return stat;
}
// AT+CEREG covers LTE; on 2G and 3G the network registration is in AT+CREG, and AT+CGATT=1 is answered quickly once
// it is set. Returns the <stat> that tells most, or one of the negative REGISTRATION_ values.
int ModemComponent::read_registration_() {
const int lte = this->read_stat_("AT+CEREG?", "+CEREG:");
if (is_registered(lte)) {
return lte;
}
return merge_registration(lte, this->read_stat_("AT+CREG?", "+CREG:"));
}
void ModemComponent::not_responding_(int baud) {
ESP_LOGW(TAG, "Modem not responding at %d baud. Check power, PWRKEY and TX/RX wiring.", baud);
if (this->answered_) {
// It answered before, so the wiring is fine; a long command or a modem restart keeps it silent for minutes
ESP_LOGW(TAG, "Modem not responding at %d baud; it may be busy or restarting", baud);
} else {
ESP_LOGW(TAG, "Modem not responding at %d baud. Check power, PWRKEY and TX/RX wiring.", baud);
}
this->set_fault_(ModemFault::MODEM_FAULT_NO_RESPONSE);
}
void ModemComponent::sim_not_ready_(const char *reason) {
// A missing or broken SIM never gets ready; the status is polled every second, so only some polls warn
if (++this->sim_polls_ == SIM_WARN_AFTER + SIM_WARN_EVERY) {
this->sim_polls_ = SIM_WARN_AFTER;
}
if (this->sim_polls_ == SIM_WARN_AFTER) {
ESP_LOGW(TAG, "SIM not ready: %s. Check that a working SIM is inserted",
reason[0] != '\0' ? reason : LOG_STR_LITERAL("no reply"));
}
this->set_fault_(ModemFault::MODEM_FAULT_SIM_NOT_READY);
}
#ifdef USE_MODEM_SEND_AT
bool ModemComponent::send_at(const std::string &cmd, uint32_t timeout) { return this->send_at(cmd.c_str(), timeout); }
@@ -954,13 +1160,54 @@ bool ModemComponent::send_at(const char *cmd, uint32_t timeout) {
#endif
// at() keeps no text from a failed command, so the raw reply is collected into reply_ to show the +CME ERROR
command_result ModemComponent::at_reply_(const char *cmd, uint32_t timeout) {
std::string line = cmd; // poll commands fit the short string buffer
line += '\r';
this->reply_len_ = 0;
this->reply_[0] = '\0';
#ifdef CONFIG_ESP_MODEM_USE_INFLATABLE_BUFFER_IF_NEEDED
// The inflatable buffer gathers CMUX frames too, so every reply comes over whole each time
const bool whole = true;
#else
// esp_modem hands a UART reply over whole each time, and a CMUX reply one frame at a time
const modem_mode mode = this->dce_->get_mode();
const bool whole = mode != modem_mode::CMUX_MODE && mode != modem_mode::CMUX_MANUAL_MODE &&
mode != modem_mode::CMUX_MANUAL_DATA && mode != modem_mode::CMUX_MANUAL_COMMAND;
#endif
struct {
bool whole;
bool cut;
} state{whole, false};
const command_result result = this->dce_->command(
line,
[this, &state](const uint8_t *data, size_t len) {
// OK, or FAIL once an ERROR line has ended (the +CME ERROR reason may still be on its way), else TIMEOUT
state.cut |= collect_reply(this->reply_, sizeof(this->reply_), this->reply_len_,
reinterpret_cast<const char *>(data), len, state.whole);
switch (reply_end(this->reply_, this->reply_len_, state.cut)) {
case ReplyEnd::REPLY_END_OK:
return command_result::OK;
case ReplyEnd::REPLY_END_ERROR:
return command_result::FAIL;
default:
return command_result::TIMEOUT;
}
},
timeout);
this->reply_len_ = flatten_reply(this->reply_, this->reply_len_);
this->reply_cut_ = state.cut;
return result;
}
command_result ModemComponent::at_(const char *cmd, uint32_t timeout) {
std::string output;
const command_result result = this->dce_->at(cmd, output, timeout);
const command_result result = this->at_reply_(cmd, timeout);
// A reply longer than the buffer kept only its end
const char *cut = this->reply_cut_ ? LOG_STR_LITERAL("...") : "";
if (result == command_result::OK) {
ESP_LOGI(TAG, "AT '%s' -> OK: %s", cmd, output.c_str());
ESP_LOGI(TAG, "AT '%s' -> OK: %s%s", cmd, cut, this->reply_);
} else {
ESP_LOGW(TAG, "AT '%s' -> %s: %s", cmd, LOG_STR_ARG(result_to_str(result)), output.c_str());
ESP_LOGW(TAG, "AT '%s' -> %s: %s%s", cmd, LOG_STR_ARG(result_to_str(result)), cut, this->reply_);
}
return result;
}
@@ -973,25 +1220,27 @@ SimResult ModemComponent::prepare_sim_() {
return SimResult::SIM_RESULT_RETRY; // the save wakes the task
}
#endif
std::string output;
if (this->dce_->at("AT+CPIN?", output, COMMAND_TIMEOUT_MS) != command_result::OK) {
// The raw reply keeps the +CME ERROR text a missing SIM gives; status below points into it
const command_result result = this->at_reply_("AT+CPIN?");
if (result == command_result::TIMEOUT) {
// The next pass checks with a sync whether the modem or only the SIM interface is silent
ESP_LOGD(TAG, "No answer to the SIM status request");
this->sim_not_ready_(LOG_STR_LITERAL("no answer to AT+CPIN?"));
this->request_resync_();
return SimResult::SIM_RESULT_RETRY;
}
if (result != command_result::OK) {
// A SIM that is still starting answers with an error for a second or so
ESP_LOGD(TAG, "SIM status not readable yet: %s", output.c_str());
this->set_fault_(ModemFault::MODEM_FAULT_SIM_NOT_READY);
ESP_LOGD(TAG, "SIM status not readable yet: %s", this->reply_);
this->sim_not_ready_(this->reply_);
return SimResult::SIM_RESULT_RETRY;
}
// Anything else, such as an echoed command, is not a status and must not reach the lock checks below
const char *found = strstr(output.c_str(), "+CPIN:");
if (found != nullptr) {
found += sizeof("+CPIN:") - 1;
while (*found == ' ') {
found++;
}
}
const char *found = sim_status(this->reply_);
const StringRef status = found != nullptr ? StringRef(found) : StringRef();
if (status.empty()) {
ESP_LOGD(TAG, "SIM status not reported yet: %s", output.c_str());
this->set_fault_(ModemFault::MODEM_FAULT_SIM_NOT_READY);
ESP_LOGD(TAG, "SIM status not reported yet: %s", this->reply_);
this->sim_not_ready_(this->reply_);
return SimResult::SIM_RESULT_RETRY;
}
ESP_LOGD(TAG, "SIM: %s", status.c_str());
@@ -1019,8 +1268,8 @@ SimResult ModemComponent::prepare_sim_() {
this->set_fault_(ModemFault::MODEM_FAULT_SIM_LOCKED);
return SimResult::SIM_RESULT_LOCKED;
}
ESP_LOGW(TAG, "SIM not ready: %s", status.c_str()); // e.g. NOT READY or NOT INSERTED
this->set_fault_(ModemFault::MODEM_FAULT_SIM_NOT_READY);
ESP_LOGD(TAG, "SIM not ready: %s", status.c_str()); // e.g. NOT READY or NOT INSERTED
this->sim_not_ready_(status.c_str());
return SimResult::SIM_RESULT_RETRY;
}
#ifdef USE_MODEM_PIN_CODE
+22 -1
View File
@@ -62,6 +62,7 @@ enum class ModemFault : uint8_t {
MODEM_FAULT_PIN_RECORD,
MODEM_FAULT_SETUP,
MODEM_FAULT_NOT_ATTACHED,
MODEM_FAULT_REGISTRATION_DENIED,
MODEM_FAULT_PPP,
MODEM_FAULT_TEARDOWN,
};
@@ -151,6 +152,7 @@ class ModemComponent : public Component {
static constexpr uint32_t RETRY_DELAY_MS = 1000;
static constexpr size_t URC_LINE_SIZE = 128;
static constexpr size_t AT_COMMAND_SIZE = 128;
static constexpr size_t REPLY_SIZE = 256; // a longer reply keeps its newest bytes, so its final line counts
#ifdef USE_MODEM_POLL
static constexpr uint8_t CSQ_UNKNOWN = 99; // AT+CSQ rssi or ber the modem cannot tell
static constexpr uint8_t CSQ_RSSI_MAX = 31;
@@ -200,8 +202,20 @@ class ModemComponent : public Component {
void hand_over_(uint32_t pending);
/// Send an AT command from the task and log the result; blocks for up to the timeout
esp_modem::command_result at_(const char *cmd, uint32_t timeout = COMMAND_TIMEOUT_MS);
/// Send an AT command; reply_ gets the whole reply on one line, including any +CME ERROR text
esp_modem::command_result at_reply_(const char *cmd, uint32_t timeout = COMMAND_TIMEOUT_MS);
void publish_status_();
/// Send the +++ escape with its guard times; true when the modem answered
bool escape_data_mode_();
/// Overflow a stuck CMUX receiver with flag bytes; true when the modem answers AT afterwards
bool flush_cmux_();
void request_resync_();
int read_stat_(const char *cmd, const char *prefix);
int read_registration_();
/// Set the UART rate; current_baud_rate_ follows when the UART takes it
esp_err_t set_uart_baud_(int baud);
void not_responding_(int baud);
void sim_not_ready_(const char *reason);
void dump_connect_params_();
SimResult prepare_sim_();
#ifdef USE_MODEM_PIN_CODE
@@ -221,6 +235,9 @@ class ModemComponent : public Component {
const char *urc_line_{nullptr}; // the line urc_pending_ hands to loop(), inside urc_reader_
#endif
std::unique_ptr<esp_modem::DCE> dce_;
char reply_[REPLY_SIZE + 1]{}; // task only; the last reply, null-terminated
size_t reply_len_{0};
bool reply_cut_{false}; // the last reply was longer than reply_ and kept only its end
std::shared_ptr<esp_modem::DTE> dte_;
esp_netif_t *ppp_netif_{nullptr};
ESPPreferenceObject pref_;
@@ -291,6 +308,9 @@ class ModemComponent : public Component {
uint8_t init_at_count_{0};
uint8_t uart_port_{UART_NUM_MAX};
uint8_t attach_polls_{0};
uint8_t idle_polls_{0}; // polls in a row that reported "not searching"
uint8_t unknown_polls_{0}; // polls in a row with no usable registration state
uint8_t sim_polls_{0}; // failed SIM status reads in this attempt
#ifdef USE_MODEM_POLL
uint8_t poll_rssi_{CSQ_UNKNOWN}; // raw AT+CSQ answers
uint8_t poll_ber_{CSQ_UNKNOWN};
@@ -298,7 +318,8 @@ class ModemComponent : public Component {
#endif
bool connect_timeout_armed_{false};
bool modem_synced_{false}; // a modem that never answered has nothing to tear down
bool resync_{false}; // the attachment read failed, so CONNECTING syncs again first
bool answered_{false}; // the modem synced since boot, so its wiring and power are fine
bool resync_{false}; // a command timed out, so CONNECTING syncs again first
bool apn_pending_{false}; // ENABLING could not set the APN at CFUN=0, so CONNECTING sets it after the SIM check
#ifdef USE_MODEM_SEND_AT
char at_command_[AT_COMMAND_SIZE];
+16 -4
View File
@@ -323,12 +323,18 @@ bool MQTTClientComponent::can_proceed() {
}
void MQTTClientComponent::start_dnslookup_() {
this->status_set_warning();
// No lookup can start before the network is up: there is no DNS server to ask yet.
// Stay disconnected, and loop() calls this again as soon as it is up.
this->waiting_for_network_ = !network::is_connected();
if (this->waiting_for_network_)
return;
for (auto &subscription : this->subscriptions_) {
subscription.subscribed = false;
subscription.resubscribe_timeout = 0;
}
this->status_set_warning();
this->dns_resolve_error_ = false;
this->dns_resolved_ = false;
ip_addr_t addr;
@@ -358,9 +364,13 @@ void MQTTClientComponent::start_dnslookup_() {
}
default:
case ERR_ARG: {
// error
// The lookup never started, so there is no answer to wait for; loop() tries again in 5 seconds
ESP_LOGW(TAG, "Error resolving broker IP address: %d", err);
break;
this->state_ = MQTT_CLIENT_DISCONNECTED;
this->disconnect_reason_ = MQTTClientDisconnectReason::DNS_RESOLVE_ERROR;
this->on_disconnect_.call(MQTTClientDisconnectReason::DNS_RESOLVE_ERROR);
this->connect_begin_ = millis();
return;
}
}
@@ -505,7 +515,9 @@ void MQTTClientComponent::loop() {
case MQTT_CLIENT_DISABLED:
return; // Return to avoid a reboot when disabled
case MQTT_CLIENT_DISCONNECTED:
if (now - this->connect_begin_ > 5000) {
// Back off 5 s after a failed attempt. Without a network no attempt was made, so the
// first one starts as soon as the network is up instead of 5 s after boot.
if (this->waiting_for_network_ || now - this->connect_begin_ > 5000) {
this->start_dnslookup_();
}
break;
+2
View File
@@ -436,6 +436,8 @@ class MQTTClientComponent final : public Component {
network::IPAddress ip_;
bool dns_resolved_{false};
bool dns_resolve_error_{false};
/// The last start_dnslookup_() found no network, so no attempt was made and there is nothing to back off from
bool waiting_for_network_{false};
bool enable_on_boot_{true};
#ifdef USE_MQTT_CRASH_LOG
bool crash_log_offered_{false};
+117 -39
View File
@@ -1,4 +1,5 @@
from collections.abc import Callable
import logging
from esphome import automation
import esphome.codegen as cg
@@ -8,6 +9,8 @@ import esphome.config_validation as cv
from esphome.const import CONF_DURATION, CONF_ID, CONF_MODE, CONF_VOLTAGE
from esphome.types import ConfigType
_LOGGER = logging.getLogger(__name__)
CODEOWNERS = ["@tomaszduda23"]
DEPENDENCIES = ["i2c"]
DOMAIN = "npm1300"
@@ -42,20 +45,18 @@ NPM1300_CHILD_SCHEMA = cv.Schema(
{cv.GenerateID(CONF_NPM1300_ID): cv.use_id(NPM1300Component)}
)
# Status registers read on each update: VBUSINSTATUS, BCHGCHARGESTATUS and BCHGERRREASON
NPM1300Status = npm1300_ns.struct("NPM1300Status")
# The status registers read on each update
STATUS_PUBLISHER = cg.HubFunction(
"status",
cg.void,
[
(cg.uint8, "vbus_status"),
(cg.uint8, "charge_status"),
(cg.uint8, "error_reason"),
],
[(NPM1300Status.operator("const").operator("ref"), "status")],
define="USE_NPM1300_STATUS_PUBLISHER",
)
VBUS_STATUS = STATUS_PUBLISHER.param("vbus_status")
CHARGE_STATUS = STATUS_PUBLISHER.param("charge_status")
ERROR_REASON = STATUS_PUBLISHER.param("error_reason")
STATUS = STATUS_PUBLISHER.param("status")
VBUS_STATUS = STATUS.vbus
CHARGE_STATUS = STATUS.charge
ERROR_REASON = STATUS.error_reason
# The ADC results and the amperes per code of the battery current
DATA_PUBLISHER = cg.HubFunction(
"data",
@@ -77,7 +78,10 @@ OUTPUTS = NPM1300Output.options(
# Written for a field the YAML leaves out
NPM1300_UNSET = 0xFF
# ADCNTCRSEL codes, by kiloohms
THERMISTOR_NONE = "none"
THERMISTOR_RESISTANCES = {10: 1, 47: 2, 100: 3}
# B25/50 of the thermistors the product specification lists for each resistance, by kiloohms
THERMISTOR_BETAS = {10: 3380, 47: 4050, 100: 4250}
LDO_MODES = {"load_switch": 0, "ldo": 1}
TERMINATION_CURRENTS = {"10%": 0, "20%": 1}
# BCHGVTRICKLESEL, by millivolts
@@ -101,14 +105,13 @@ def _one_of_units(
validator: Callable[[object], float],
allowed: list[int],
unit: str,
scale: float = 1000,
) -> Callable[[object], float]:
"""Validate a quantity with `validator` and accept only the listed values, given in units * `scale`."""
"""Validate a quantity with `validator` and accept only the listed values, given in thousandths of `unit`."""
def validate(value: object) -> float:
value = validator(value)
if round(value * scale) not in allowed:
options = ", ".join(f"{v / scale:g}{unit}" for v in allowed)
if _millis(value) not in allowed:
options = ", ".join(f"{v / 1000:g}{unit}" for v in allowed)
raise cv.Invalid(f"Must be one of {options}")
return value
@@ -135,6 +138,23 @@ def _stepped(
return validate
def _thermistor_resistance(value: object) -> float | str:
if isinstance(value, str) and value.lower() == THERMISTOR_NONE:
return THERMISTOR_NONE
value = cv.resistance(value)
if round(value) not in (kilohms * 1000 for kilohms in THERMISTOR_RESISTANCES):
options = ", ".join(f"{kilohms}kOhm" for kilohms in THERMISTOR_RESISTANCES)
raise cv.Invalid(f"Must be one of {options} or {THERMISTOR_NONE}")
return value
def thermistor_beta(config: ConfigType) -> int:
"""The B constant of the hub's thermistor: the configured one, or the one listed for its resistance."""
if (beta := config.get(CONF_THERMISTOR_BETA)) is not None:
return beta
return THERMISTOR_BETAS[round(config[CONF_THERMISTOR_RESISTANCE] / 1000)]
OUTPUT_VOLTAGE = _stepped(cv.voltage, 1000, 3300, 100, "V")
VBUS_CURRENT_LIMIT = _stepped(cv.current, 100, 1500, 100, "A")
@@ -150,15 +170,58 @@ LDO_SCHEMA = BUCK_SCHEMA.extend(
}
)
CHARGER_SCHEMA = cv.Schema(
WARM_TERMINATION_VOLTAGE_DEFAULT = 3.6
def _warm_termination_default(config: ConfigType) -> ConfigType:
"""Keep the default warm termination voltage at or below the termination voltage.
Warn when the default stays below a higher termination voltage.
"""
if (
not isinstance(config, dict)
or CONF_WARM_TERMINATION_VOLTAGE in config
or CONF_TERMINATION_VOLTAGE not in config
):
return config
try:
termination = cv.voltage(config[CONF_TERMINATION_VOLTAGE])
except cv.Invalid:
# The schema reports it
return config
if termination < WARM_TERMINATION_VOLTAGE_DEFAULT - 0.001:
# A warm battery is never charged higher than a cool one
return {
**config,
CONF_WARM_TERMINATION_VOLTAGE: config[CONF_TERMINATION_VOLTAGE],
}
if termination > WARM_TERMINATION_VOLTAGE_DEFAULT + 0.001:
_LOGGER.warning(
"npm1300 '%s' is not set, so a warm battery (45 °C to 60 °C by default) stops "
"charging at %.2fV instead of the %.2fV of '%s'. Set '%s' to the value your "
"battery allows when warm",
CONF_WARM_TERMINATION_VOLTAGE,
WARM_TERMINATION_VOLTAGE_DEFAULT,
termination,
CONF_TERMINATION_VOLTAGE,
CONF_WARM_TERMINATION_VOLTAGE,
)
return config
_CHARGER_SETTINGS_SCHEMA = cv.Schema(
{
cv.Required(CONF_CHARGE_CURRENT): _stepped(cv.current, 32, 800, 2, "A"),
cv.Optional(CONF_TERMINATION_VOLTAGE, default="4.2V"): _one_of_units(
cv.voltage, TERMINATION_VOLTAGES, "V"
# Defaults are the reset values of the product specification
cv.Optional(CONF_CHARGE_CURRENT, default="32mA"): _stepped(
cv.current, 32, 800, 2, "A"
),
cv.Optional(CONF_WARM_TERMINATION_VOLTAGE): _one_of_units(
cv.Optional(CONF_TERMINATION_VOLTAGE, default="3.6V"): _one_of_units(
cv.voltage, TERMINATION_VOLTAGES, "V"
),
cv.Optional(
CONF_WARM_TERMINATION_VOLTAGE,
default=f"{WARM_TERMINATION_VOLTAGE_DEFAULT}V",
): _one_of_units(cv.voltage, TERMINATION_VOLTAGES, "V"),
cv.Optional(CONF_TERMINATION_CURRENT, default="10%"): cv.enum(
TERMINATION_CURRENTS
),
@@ -169,22 +232,37 @@ CHARGER_SCHEMA = cv.Schema(
cv.current, list(DISCHARGE_CURRENT_LIMITS), "A"
),
cv.Optional(CONF_RECHARGE, default=True): cv.boolean,
cv.Optional(CONF_ENABLED, default=True): cv.boolean,
cv.Optional(CONF_ENABLED, default=False): cv.boolean,
}
)
CHARGER_SCHEMA = cv.All(_warm_termination_default, _CHARGER_SETTINGS_SCHEMA)
CONFIG_SCHEMA = (
def _check_thermistor(config: ConfigType) -> ConfigType:
"""A wrong thermistor shifts the battery temperature the charger sees, so charging needs one chosen."""
resistance = config.get(CONF_THERMISTOR_RESISTANCE)
if CONF_CHARGER in config and resistance is None:
raise cv.Invalid(
f"'{CONF_THERMISTOR_RESISTANCE}' is required with '{CONF_CHARGER}': set the nominal "
f"resistance of the battery thermistor, or '{THERMISTOR_NONE}'",
path=[CONF_THERMISTOR_RESISTANCE],
)
if CONF_THERMISTOR_BETA in config and resistance in (None, THERMISTOR_NONE):
raise cv.Invalid(
f"'{CONF_THERMISTOR_BETA}' needs '{CONF_THERMISTOR_RESISTANCE}' set to the "
"resistance of the thermistor",
path=[CONF_THERMISTOR_BETA],
)
return config
CONFIG_SCHEMA = cv.All(
cv.Schema(
{
cv.GenerateID(): cv.declare_id(NPM1300Component),
cv.Optional(CONF_VBUS_CURRENT_LIMIT): VBUS_CURRENT_LIMIT,
cv.Optional(CONF_THERMISTOR_RESISTANCE): _one_of_units(
cv.resistance, list(THERMISTOR_RESISTANCES), "kOhm", scale=0.001
),
cv.Optional(CONF_THERMISTOR_BETA, default=3380): cv.int_range(
min=1, max=65535
),
cv.Optional(CONF_THERMISTOR_RESISTANCE): _thermistor_resistance,
cv.Optional(CONF_THERMISTOR_BETA): cv.int_range(min=1, max=65535),
cv.Optional(CONF_CHARGER): CHARGER_SCHEMA,
cv.Optional(CONF_BUCK1): BUCK_SCHEMA,
cv.Optional(CONF_BUCK2): BUCK_SCHEMA,
@@ -193,7 +271,8 @@ CONFIG_SCHEMA = (
}
)
.extend(cv.polling_component_schema("60s"))
.extend(i2c.i2c_device_schema(0x6B))
.extend(i2c.i2c_device_schema(0x6B)),
_check_thermistor,
)
@@ -208,7 +287,7 @@ def _vbus_current_limit_code(amps: float) -> int:
def _charger_config(config: ConfigType) -> cg.StructInitializer:
termination = _termination_voltage_code(config[CONF_TERMINATION_VOLTAGE])
warm = config.get(CONF_WARM_TERMINATION_VOLTAGE)
warm = _termination_voltage_code(config[CONF_WARM_TERMINATION_VOLTAGE])
return cg.StructInitializer(
NPM1300ChargerConfig,
("current", _millis(config[CONF_CHARGE_CURRENT]) // 2),
@@ -217,10 +296,7 @@ def _charger_config(config: ConfigType) -> cg.StructInitializer:
DISCHARGE_CURRENT_LIMITS[_millis(config[CONF_DISCHARGE_CURRENT_LIMIT])],
),
("termination_voltage", termination),
(
"warm_termination_voltage",
termination if warm is None else _termination_voltage_code(warm),
),
("warm_termination_voltage", warm),
("trickle_voltage", TRICKLE_VOLTAGES[_millis(config[CONF_TRICKLE_VOLTAGE])]),
("termination_current", TERMINATION_CURRENTS[config[CONF_TERMINATION_CURRENT]]),
("recharge", config[CONF_RECHARGE]),
@@ -247,6 +323,13 @@ def _output_config(config: ConfigType | None) -> cg.StructInitializer:
def _config(config: ConfigType) -> cg.StructInitializer:
charger = config.get(CONF_CHARGER)
resistance = config.get(CONF_THERMISTOR_RESISTANCE)
if resistance is None:
thermistor, beta = NPM1300_UNSET, 0
elif resistance == THERMISTOR_NONE:
thermistor, beta = 0, 0
else:
thermistor = THERMISTOR_RESISTANCES[round(resistance / 1000)]
beta = thermistor_beta(config)
return cg.StructInitializer(
NPM1300Config,
(
@@ -254,13 +337,8 @@ def _config(config: ConfigType) -> cg.StructInitializer:
cg.ArrayInitializer(*(_output_config(config.get(key)) for key in OUTPUTS)),
),
("charger", None if charger is None else _charger_config(charger)),
("thermistor_beta", config[CONF_THERMISTOR_BETA]),
(
"thermistor",
NPM1300_UNSET
if resistance is None
else THERMISTOR_RESISTANCES[round(resistance / 1000)],
),
("thermistor_beta", beta),
("thermistor", thermistor),
("charger_configured", charger is not None),
)
+51 -34
View File
@@ -29,6 +29,7 @@ static constexpr uint16_t REG_BCHG_VTERM = 0x030C;
static constexpr uint16_t REG_BCHG_VTERM_R = 0x030D;
static constexpr uint16_t REG_BCHG_VTRICKLE_SEL = 0x030E;
static constexpr uint16_t REG_BCHG_ITERM_SEL = 0x030F;
static constexpr uint16_t REG_BCHG_NTC_STATUS = 0x0332;
static constexpr uint16_t REG_BCHG_CHARGE_STATUS = 0x0334;
static constexpr uint16_t REG_BCHG_ERR_REASON = 0x0336;
static constexpr uint16_t REG_BUCK1_ENA_SET = 0x0400;
@@ -53,6 +54,9 @@ static constexpr uint16_t REG_SHIP_TASK_SHIP_MODE = 0x0B02;
// VBUSINSTATUS
static constexpr uint8_t VBUS_PRESENT = 0x01;
// NTCSTATUS
static constexpr uint8_t NTC_STATUS_COLD = 0x01;
static constexpr uint8_t NTC_STATUS_HOT = 0x08;
// BCHGCHARGESTATUS; bit 0 (battery detected) is reserved since C00 silicon
static constexpr uint8_t CHARGE_STATUS_COMPLETED = 0x02;
static constexpr uint8_t CHARGE_STATUS_TRICKLE = 0x04;
@@ -107,26 +111,36 @@ float ntc_temperature(uint16_t code, float inv_beta) {
#endif
#ifdef USE_TEXT_SENSOR
PROGMEM_STRING_TABLE(ChargerStatusStrings, "Error", "Paused, Die Too Hot", "Charge Complete", "Trickle Charge",
"Constant Current", "Constant Voltage", "Discharging", "Not Charging");
// BCHGCHARGESTATUS bits in order of priority; bit i is reported as string i + 1
PROGMEM_STRING_TABLE(ChargerStatusStrings, "Discharging", "Error", "Disabled", "Paused, PMIC Too Hot",
"Charge Complete", "Trickle Charge", "Constant Current", "Constant Voltage",
"Paused, Battery Too Cold", "Paused, Battery Too Hot", "Not Charging");
static constexpr uint8_t CHARGER_STATUS_FIRST_BIT = 3;
// BCHGCHARGESTATUS bits in order of priority, reported from string CHARGER_STATUS_FIRST_BIT on
static const uint8_t CHARGER_STATUS_BITS[] PROGMEM = {CHARGE_STATUS_DIE_TEMP_HIGH, CHARGE_STATUS_COMPLETED,
CHARGE_STATUS_TRICKLE, CHARGE_STATUS_CONSTANT_CURRENT,
CHARGE_STATUS_CONSTANT_VOLTAGE};
static uint8_t charger_status_index(uint8_t vbus_status, uint8_t charge_status, uint8_t error_reason) {
if (error_reason != 0)
static uint8_t charger_status_index(const NPM1300Status &status) {
if ((status.vbus & VBUS_PRESENT) == 0)
return 0;
if (status.error_reason != 0)
return 1;
if ((status.charger_enable & 1) == 0)
return 2;
for (size_t i = 0; i < sizeof(CHARGER_STATUS_BITS); i++) {
if ((charge_status & progmem_read_byte(&CHARGER_STATUS_BITS[i])) != 0)
return i + 1;
if ((status.charge & progmem_read_byte(&CHARGER_STATUS_BITS[i])) != 0)
return CHARGER_STATUS_FIRST_BIT + i;
}
return (vbus_status & VBUS_PRESENT) == 0 ? 6 : 7;
// The charger stops without an error outside the cold and hot limits of the battery temperature
if ((status.ntc & NTC_STATUS_COLD) != 0)
return 8;
if ((status.ntc & NTC_STATUS_HOT) != 0)
return 9;
return 10;
}
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, uint8_t vbus_status, uint8_t charge_status,
uint8_t error_reason) {
const uint8_t index = charger_status_index(vbus_status, charge_status, error_reason);
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, const NPM1300Status &status) {
const uint8_t index = charger_status_index(status);
if (index == last)
return;
last = index;
@@ -198,7 +212,7 @@ bool NPM1300Component::configure_charger_(const NPM1300Config &config) {
split_9bit(charger.discharge_limit, discharge);
uint8_t disable = charger.recharge ? 0 : CHARGER_DISABLE_RECHARGE;
// Without a thermistor the charger reports an NTC error and does not charge
if (config.thermistor == NPM1300_UNSET)
if (config.thermistor == 0 || config.thermistor == NPM1300_UNSET)
disable |= CHARGER_DISABLE_NTC;
const uint8_t enable = (CHARGER_DISABLE_RECHARGE | CHARGER_DISABLE_NTC) & ~disable;
if (this->write_register16(REG_BCHG_ISET_MSB, current, sizeof(current)) != i2c::ERROR_OK ||
@@ -292,33 +306,40 @@ void NPM1300Component::hibernate(uint32_t duration_ms) {
}
void NPM1300Component::update() {
uint8_t vbus_status;
uint8_t charge_status;
uint8_t error_reason;
if (!this->status_comm_check(this->read_byte_reg16(REG_VBUSIN_STATUS, &vbus_status) &&
this->read_byte_reg16(REG_BCHG_CHARGE_STATUS, &charge_status) &&
this->read_byte_reg16(REG_BCHG_ERR_REASON, &error_reason)))
NPM1300Status status;
// NTCSTATUS, DIETEMPSTATUS and BCHGCHARGESTATUS
uint8_t charger_status[3];
if (!this->status_comm_check(this->read_byte_reg16(REG_VBUSIN_STATUS, &status.vbus) &&
this->read_byte_reg16(REG_BCHG_ENABLE_SET, &status.charger_enable) &&
this->read_register16(REG_BCHG_NTC_STATUS, charger_status, sizeof(charger_status)) ==
i2c::ERROR_OK &&
this->read_byte_reg16(REG_BCHG_ERR_REASON, &status.error_reason)))
return;
status.ntc = charger_status[0];
status.charge = charger_status[2];
// Without a thermistor the NTC pin is grounded and can read as a hot battery
if (progmem_read_byte(&this->config_->thermistor) == 0)
status.ntc = 0;
// The chip goes back to its default VBUS current limit whenever VBUS is removed
const bool vbus_present = (vbus_status & VBUS_PRESENT) != 0;
const bool vbus_present = (status.vbus & VBUS_PRESENT) != 0;
if (vbus_present && !this->vbus_present_ && this->vbus_current_limit_ != NPM1300_UNSET &&
!this->status_comm_check(this->apply_vbus_current_limit_()))
return;
this->vbus_present_ = vbus_present;
if (error_reason != this->last_error_reason_) {
this->last_error_reason_ = error_reason;
if (error_reason != 0) {
ESP_LOGW(TAG, "Charger error, BCHGERRREASON 0x%02X", error_reason);
if (status.error_reason != this->last_error_reason_) {
this->last_error_reason_ = status.error_reason;
if (status.error_reason != 0) {
ESP_LOGW(TAG, "Charger error, BCHGERRREASON 0x%02X", status.error_reason);
}
}
#ifdef USE_NPM1300_STATUS_PUBLISHER
if (this->status_publisher_ != nullptr)
this->status_publisher_(vbus_status, charge_status, error_reason);
this->status_publisher_(status);
#endif
#ifdef USE_SWITCH
if (!this->status_comm_check(this->publish_switches_()))
if (!this->status_comm_check(this->publish_switches_(status)))
return;
#endif
@@ -348,16 +369,10 @@ void NPM1300Component::update() {
}
#ifdef USE_SWITCH
bool NPM1300Component::publish_switches_() {
bool NPM1300Component::publish_switches_(const NPM1300Status &status) {
PUBLISH_STATE(this->charger_switch_, (status.charger_enable & 1) != 0);
uint8_t value;
bool ok = true;
if (this->charger_switch_ != nullptr) {
if (this->read_byte_reg16(REG_BCHG_ENABLE_SET, &value)) {
this->charger_switch_->publish_state((value & 1) != 0);
} else {
ok = false;
}
}
switch_::Switch *const bucks[2] = {this->buck1_switch_, this->buck2_switch_};
if (bucks[0] != nullptr || bucks[1] != nullptr) {
if (this->read_byte_reg16(REG_BUCK_STATUS, &value)) {
@@ -461,7 +476,9 @@ void NPM1300Component::dump_config() {
ESP_LOGCONFIG(TAG, " Enabled at boot: %s", YESNO(output.enabled != 0));
}
}
if (config.thermistor != NPM1300_UNSET) {
if (config.thermistor == 0) {
ESP_LOGCONFIG(TAG, " Thermistor: none");
} else if (config.thermistor != NPM1300_UNSET) {
ESP_LOGCONFIG(TAG, " Thermistor B constant: %u", config.thermistor_beta);
}
#ifdef USE_SENSOR
+13 -5
View File
@@ -54,10 +54,19 @@ struct NPM1300Config {
NPM1300OutputConfig outputs[NPM1300_OUTPUT_COUNT];
NPM1300ChargerConfig charger; // only applied when charger_configured
uint16_t thermistor_beta;
uint8_t thermistor; // ADCNTCRSEL code: 1 for 10 kOhm, 2 for 47 kOhm, 3 for 100 kOhm, or NPM1300_UNSET
uint8_t thermistor; // ADCNTCRSEL code: 0 for none, 1 for 10 kOhm, 2 for 47 kOhm, 3 for 100 kOhm, or NPM1300_UNSET
bool charger_configured;
};
/// The status registers read on every update
struct NPM1300Status {
uint8_t vbus; // VBUSINSTATUS
uint8_t charger_enable; // BCHGENABLESET
uint8_t ntc; // NTCSTATUS
uint8_t charge; // BCHGCHARGESTATUS
uint8_t error_reason; // BCHGERRREASON
};
#ifdef USE_NPM1300_DATA_PUBLISHER
/// The 10-bit ADC result whose high 8 bits are adc[msb] and low 2 bits are at `shift` in adc[lsbs]
inline uint16_t adc_code(const uint8_t *adc, uint8_t msb, uint8_t lsbs, uint8_t shift) {
@@ -68,8 +77,7 @@ float ntc_temperature(uint16_t code, float inv_beta);
#endif
#ifdef USE_TEXT_SENSOR
/// Publish the charger status text, only when it differs from `last`
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, uint8_t vbus_status, uint8_t charge_status,
uint8_t error_reason);
void publish_charger_status(text_sensor::TextSensor *sensor, uint8_t &last, const NPM1300Status &status);
#endif
class NPM1300Component : public PollingComponent, public i2c::I2CDevice {
@@ -95,7 +103,7 @@ class NPM1300Component : public PollingComponent, public i2c::I2CDevice {
float get_setup_priority() const override { return setup_priority::BUS - 1.0f; }
#ifdef USE_NPM1300_STATUS_PUBLISHER
HUB_PUBLISHER(status, uint8_t, uint8_t, uint8_t)
HUB_PUBLISHER(status, const NPM1300Status &)
#endif
#ifdef USE_NPM1300_DATA_PUBLISHER
HUB_PUBLISHER(data, const uint8_t *, float)
@@ -128,7 +136,7 @@ class NPM1300Component : public PollingComponent, public i2c::I2CDevice {
#endif
#ifdef USE_SWITCH
/// Returns false when a status read failed
bool publish_switches_();
bool publish_switches_(const NPM1300Status &status);
#endif
const NPM1300Config *config_;
+6 -5
View File
@@ -21,7 +21,6 @@ from esphome.types import ConfigType
from . import (
ADC,
CONF_NPM1300_ID,
CONF_THERMISTOR_BETA,
CONF_THERMISTOR_RESISTANCE,
CONF_VBUS_CURRENT_LIMIT,
DATA_PUBLISHER,
@@ -30,7 +29,9 @@ from . import (
DUMP_TAG,
IBAT_SCALE,
NPM1300_CHILD_SCHEMA,
THERMISTOR_NONE,
npm1300_ns,
thermistor_beta,
)
DEPENDENCIES = ["npm1300"]
@@ -109,10 +110,10 @@ def _final_validate(config: ConfigType) -> None:
if CONF_BATTERY_TEMPERATURE not in config:
return
hub = fv.get_declaring_config(config[CONF_NPM1300_ID])
if CONF_THERMISTOR_RESISTANCE not in hub:
if hub.get(CONF_THERMISTOR_RESISTANCE, THERMISTOR_NONE) == THERMISTOR_NONE:
raise cv.Invalid(
f"'{CONF_BATTERY_TEMPERATURE}' needs '{CONF_THERMISTOR_RESISTANCE}' "
"set on the npm1300 component",
f"'{CONF_BATTERY_TEMPERATURE}' needs '{CONF_THERMISTOR_RESISTANCE}' set to the "
"nominal resistance of the battery thermistor on the npm1300 component",
path=[CONF_BATTERY_TEMPERATURE],
)
@@ -145,7 +146,7 @@ async def to_code(config: ConfigType) -> None:
if (var := await sensors(CONF_BATTERY_TEMPERATURE, None)) is not None:
hub_config = next(c for c in CORE.config[DOMAIN] if c[CONF_ID] == hub_id)
state = npm1300_ns.ntc_temperature(
_adc(2, 5, 2), 1.0 / hub_config[CONF_THERMISTOR_BETA]
_adc(2, 5, 2), 1.0 / thermistor_beta(hub_config)
)
_add_adc_sensor(hub, var, state, "Battery Temperature")
await sensors(CONF_VBUS_CURRENT_LIMIT, hub.set_vbus_current_limit_sensor)
+12 -4
View File
@@ -15,6 +15,7 @@ from . import (
CONF_THERMISTOR_RESISTANCE,
NPM1300_CHILD_SCHEMA,
OUTPUTS,
THERMISTOR_NONE,
)
DEPENDENCIES = ["npm1300"]
@@ -44,11 +45,18 @@ def _final_validate(config: ConfigType) -> None:
if CONF_CHARGER not in config:
return
hub = fv.get_declaring_config(config[CONF_NPM1300_ID])
# Only the charger block turns off the NTC check, without which the charger never starts
if CONF_CHARGER not in hub and CONF_THERMISTOR_RESISTANCE not in hub:
# A wrong thermistor shifts the battery temperature the charger sees
if CONF_THERMISTOR_RESISTANCE not in hub:
raise cv.Invalid(
f"The '{CONF_CHARGER}' switch needs a '{CONF_CHARGER}' block or "
f"'{CONF_THERMISTOR_RESISTANCE}' on the npm1300 component",
f"The '{CONF_CHARGER}' switch needs '{CONF_THERMISTOR_RESISTANCE}' on the npm1300 "
f"component: the nominal resistance of the battery thermistor, or '{THERMISTOR_NONE}'",
path=[CONF_CHARGER],
)
# Only the charger block turns off the NTC check, without which the charger never starts
if CONF_CHARGER not in hub and hub[CONF_THERMISTOR_RESISTANCE] == THERMISTOR_NONE:
raise cv.Invalid(
f"The '{CONF_CHARGER}' switch needs a '{CONF_CHARGER}' block when "
f"'{CONF_THERMISTOR_RESISTANCE}' is '{THERMISTOR_NONE}'",
path=[CONF_CHARGER],
)
+2 -6
View File
@@ -11,14 +11,12 @@ from esphome.cpp_generator import (
from esphome.types import ConfigType
from . import (
CHARGE_STATUS,
CONF_NPM1300_ID,
DUMP,
DUMP_TAG,
ERROR_REASON,
NPM1300_CHILD_SCHEMA,
STATUS,
STATUS_PUBLISHER,
VBUS_STATUS,
npm1300_ns,
)
@@ -48,9 +46,7 @@ async def to_code(config: ConfigType) -> None:
)
STATUS_PUBLISHER.add(
hub,
npm1300_ns.publish_charger_status(
parent_ref(var), last, VBUS_STATUS, CHARGE_STATUS, ERROR_REASON
),
npm1300_ns.publish_charger_status(parent_ref(var), last, STATUS),
)
DUMP.add(
hub,
+15 -8
View File
@@ -13,6 +13,7 @@ from esphome.build_helpers.ccache import resolve_ccache_path
import esphome.codegen as cg
from esphome.components import network
from esphome.components.zephyr import (
PreferenceStorage,
Section,
add_extra_script,
copy_files as zephyr_copy_files,
@@ -106,6 +107,7 @@ from .const import (
VARIANT_NRF52832,
VARIANT_NRF52840,
VARIANT_REGULATOR,
VARIANTS_NRF54L,
VARIANTS_WITHOUT_USB,
)
from .framework import (
@@ -536,6 +538,11 @@ def _final_validate(config):
FINAL_VALIDATE_SCHEMA = _final_validate
def _preferences_storage(variant: str) -> PreferenceStorage:
"""The storage for preferences: ZMS on the RRAM of the nRF54L, NVS on flash."""
return "ZMS" if variant in VARIANTS_NRF54L else "NVS"
@coroutine_with_priority(CoroPriority.PLATFORM)
async def to_code(config: ConfigType) -> None:
"""Convert the configuration to code."""
@@ -544,7 +551,7 @@ async def to_code(config: ConfigType) -> None:
variant = get_nrf52_variant()
cg.add_define("ESPHOME_VARIANT", variant)
cg.add_build_flag(f"-DUSE_NRF52_VARIANT_{variant}")
if variant in (VARIANT_NRF54L15, VARIANT_NRF54LM20):
if variant in VARIANTS_NRF54L:
# The entropy driver runs on the CRACEN crypto unit, which needs Nordic's PSA crypto
include_west_project("mbedtls")
include_west_project("oberon-psa-crypto")
@@ -581,7 +588,7 @@ async def to_code(config: ConfigType) -> None:
cg.add_platformio_option(
"platform_packages",
[
f"platformio/framework-zephyr@https://github.com/tomaszduda23/framework-sdk-nrf/archive/refs/tags/v{CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]}.zip",
f"platformio/framework-zephyr@https://github.com/tomaszduda23/framework-sdk-nrf/archive/refs/tags/v{CORE.framework_version}.zip",
],
)
if config[KEY_BOOTLOADER] != BOOTLOADER_MCUBOOT:
@@ -612,11 +619,11 @@ async def to_code(config: ConfigType) -> None:
if config[KEY_BOOTLOADER] in ADAFRUIT_BOOTLOADERS:
cg.add_define("USE_BOOTLOADER_ADAFRUIT")
zephyr_setup_preferences()
zephyr_setup_preferences(_preferences_storage(variant))
zephyr_to_code(config)
# The nRF54L has RRAM (cpuapp_rram) and no flash0 node
if CORE.testing_mode and variant not in (VARIANT_NRF54L15, VARIANT_NRF54LM20):
if CORE.testing_mode and variant not in VARIANTS_NRF54L:
zephyr_add_overlay(
f"""
&flash0 {{
@@ -627,7 +634,7 @@ async def to_code(config: ConfigType) -> None:
if dfu_config := config.get(CONF_DFU):
CORE.add_job(_dfu_to_code, dfu_config)
framework_ver: cv.Version = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
framework_ver = CORE.framework_version
if (dcdc := config.get(CONF_DCDC)) is not None:
if framework_ver < cv.Version(2, 9, 2):
zephyr_add_prj_conf("BOARD_ENABLE_DCDC", dcdc)
@@ -1291,13 +1298,13 @@ def _write_pch_checksum(build_dir: Path, source_dir: Path) -> None:
The app image dir follows the SDK version, like get_elf_path;
2.9.2+ always wraps the build in sysbuild."""
app_dir = build_dir
if CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION] >= cv.Version(2, 9, 2):
if CORE.framework_version >= cv.Version(2, 9, 2):
app_dir = build_dir / "zephyr"
checksum = pch.pch_checksum(
CORE.relative_src_path(),
pch.PCH_DEFAULT_HEADERS,
(
str(CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]),
str(CORE.framework_version),
zephyr_data()[KEY_BOARD],
# Kconfig inputs that reach autoconf.h without a .conf line
",".join(sorted(wanted_west_projects())),
@@ -1545,7 +1552,7 @@ def run_compile(args, config: ConfigType) -> bool:
raise EsphomeError("nRF52 native build failed")
zephyr_dir = build_dir / "zephyr"
framework_ver = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
framework_ver = CORE.framework_version
bootloader = zephyr_data()[KEY_BOOTLOADER]
# (dev_type, sd_req) per bootloader — values from Nordic SoftDevice release notes.
+5 -4
View File
@@ -8,7 +8,7 @@ import subprocess
import sys
import esphome.config_validation as cv
from esphome.const import CONF_OTA, CONF_PLATFORM, KEY_CORE, KEY_FRAMEWORK_VERSION
from esphome.const import CONF_OTA, CONF_PLATFORM
from esphome.core import CORE, EsphomeError
from esphome.framework_helpers import run_command_ok
@@ -17,6 +17,7 @@ from .const import (
VARIANT_NRF54LM20,
VARIANT_NRF52832,
VARIANT_NRF52840,
VARIANTS_NRF54L,
)
from .framework import (
check_and_install,
@@ -81,7 +82,7 @@ def can_upload_using_cmsis_dap() -> bool:
if (
CORE.using_toolchain_platformio
or variant not in _PYOCD_TARGETS
or CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION] < cv.Version(2, 9, 2)
or CORE.framework_version < cv.Version(2, 9, 2)
):
return False
if (target_file := _PYOCD_TARGET_FILES.get(variant)) is None:
@@ -112,7 +113,7 @@ def _images(build_dir: Path) -> list[Path]:
Chosen by SDK version and by whether MCUboot is built, so a file left by another build is
never picked and a missing part is an error rather than a partial flash.
"""
framework_ver = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
framework_ver = CORE.framework_version
if framework_ver < cv.Version(2, 9, 2):
raise EsphomeError(
"Flashing with pyOCD needs nRF52 framework version 2.9.2 or newer"
@@ -145,7 +146,7 @@ def upload_using_cmsis_dap(unique_id: str | None = None) -> None:
pyocd = [str(paths["python_executable"]), "-m", "pyocd"]
probe = ["-t", target] + (["-u", unique_id] if unique_id else [])
cmd = [*pyocd, "flash", "--no-wait", *probe, "-e", "sector"]
if variant in (VARIANT_NRF54L15, VARIANT_NRF54LM20):
if variant in VARIANTS_NRF54L:
cmd += ["--script", str(_NRF54L_WATCHDOG_SCRIPT)]
cmd += [str(image) for image in images]
if not run_command_ok(cmd, env=env, stream_output=True):
+2
View File
@@ -41,6 +41,8 @@ VARIANT_I2C = {
VARIANT_NRF54LM20: VariantI2C("i2c21", (1, 3)),
}
VARIANTS_WITHOUT_USB = frozenset({VARIANT_NRF52832, VARIANT_NRF54L15})
# The nRF54L family: RRAM instead of flash, the CRACEN crypto unit and the wdt31 watchdog
VARIANTS_NRF54L = frozenset({VARIANT_NRF54L15, VARIANT_NRF54LM20})
# Devicetree label of the main regulator, reg1 on the others
VARIANT_REGULATOR = {VARIANT_NRF52832: "reg"}
VARIANT_FLASH_SIZE = {VARIANT_NRF52832: 0x80000, VARIANT_NRF52840: 0x100000}
+5 -7
View File
@@ -24,7 +24,6 @@ from esphome.components.zephyr.sdk_install import (
sdk_toolchain_path,
)
import esphome.config_validation as cv
from esphome.const import KEY_CORE, KEY_FRAMEWORK_VERSION
from esphome.core import CORE, EsphomeError
from esphome.framework_helpers import (
create_venv,
@@ -48,7 +47,7 @@ _TOOLCHAIN_VERSIONS = (TOOLCHAIN_VERSION, _TOOLCHAIN_VERSION_NCS_3_4_0)
def _uses_sdk_ng_1_toolchain() -> bool:
"""True when the framework needs Zephyr SDK 1.0+."""
return CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION] >= cv.Version(3, 4, 0)
return CORE.framework_version >= cv.Version(3, 4, 0)
def _get_toolchain_version() -> str:
@@ -97,7 +96,7 @@ def toolchain_tool(name: str) -> Path:
def _get_version_str() -> str:
framework_ver = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
framework_ver = CORE.framework_version
return f"v{framework_ver.major}.{framework_ver.minor}.{framework_ver.patch}"
@@ -390,7 +389,7 @@ def include_west_project(name: str) -> None:
def bluetooth_west_projects() -> tuple[str, ...]:
"""Bluetooth's crypto: TinyCrypt up to SDK 3.1, PSA (mbedtls, Oberon) from 3.2."""
if CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION] >= cv.Version(3, 2, 0):
if CORE.framework_version >= cv.Version(3, 2, 0):
return ("mbedtls", "oberon-psa-crypto")
return ("tinycrypt",)
@@ -398,7 +397,7 @@ def bluetooth_west_projects() -> tuple[str, ...]:
def wanted_west_projects() -> set[str]:
projects = set(_get_data().west_projects)
# Zephyr 4.1 moved the Cortex-M core headers to cmsis_6
if CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION] >= cv.Version(3, 1, 0):
if CORE.framework_version >= cv.Version(3, 1, 0):
projects.add("cmsis_6")
# Sysbuild builds the MCUboot image with any bootloader
if CORE.data.get(KEY_ZEPHYR, {}).get(KEY_SYSBUILD):
@@ -580,8 +579,7 @@ def _check_and_install(version: str) -> None:
projects = wanted_west_projects()
if not sentinel.exists() or not zephyr_reqs.exists():
_install_framework(env_python_path, framework_path, version, projects)
framework_ver = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
if framework_ver < cv.Version(2, 9, 2):
if CORE.framework_version < cv.Version(2, 9, 2):
_patch_uf2conv_escape_sequences(framework_path)
sentinel.touch()
else:
+1 -2
View File
@@ -7,7 +7,6 @@ gives the binutils, the linked image and idedata of that build.
from pathlib import Path
import esphome.config_validation as cv
from esphome.const import KEY_CORE, KEY_FRAMEWORK_VERSION
from esphome.core import CORE
from .framework import toolchain_tool
@@ -27,7 +26,7 @@ def get_elf_path() -> Path:
Chosen by version rather than by probing so a leftover image from another
SDK layout is never analyzed in place of the current build.
"""
if CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION] < cv.Version(2, 9, 2):
if CORE.framework_version < cv.Version(2, 9, 2):
return CORE.relative_pioenvs_path(CORE.name, "zephyr", "zephyr.elf")
return CORE.relative_pioenvs_path(CORE.name, "zephyr", "zephyr", "zephyr.elf")
+1 -3
View File
@@ -56,8 +56,6 @@ from esphome.const import (
CONF_TX_PIN,
CONF_USE_ADDRESS,
CONF_WIFI,
KEY_CORE,
KEY_FRAMEWORK_VERSION,
PLATFORM_ESP32,
PlatformFramework,
)
@@ -584,7 +582,7 @@ async def to_code(config: ConfigType) -> None:
# Crypto through PSA: mbedtls, plus Oberon from SDK 2.7
include_west_project("mbedtls")
include_west_project("openthread")
if CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION] >= cv.Version(2, 7, 0):
if CORE.framework_version >= cv.Version(2, 7, 0):
include_west_project("oberon-psa-crypto")
zephyr_add_prj_conf("NET_L2_OPENTHREAD", True)
zephyr_add_prj_conf(
+3
View File
@@ -0,0 +1,3 @@
"""PCM1863 audio ADC component."""
DOMAIN = "pcm1863"
+62
View File
@@ -0,0 +1,62 @@
import esphome.codegen as cg
from esphome.components import i2c
from esphome.components.audio_adc import AudioAdc
import esphome.config_validation as cv
from esphome.const import CONF_BITS_PER_SAMPLE, CONF_INPUT, CONF_MIC_GAIN
from esphome.types import ConfigType
CODEOWNERS = ["@anabolyc"]
DEPENDENCIES = ["i2c"]
CONF_PCM1863_ID = "pcm1863_id"
# The PGA covers -12 dB to +40 dB in 0.5 dB steps
PCM1863_MIC_GAIN_MIN = -12.0
PCM1863_MIC_GAIN_MAX = 40.0
pcm1863_ns = cg.esphome_ns.namespace("pcm1863")
PCM1863 = pcm1863_ns.class_("PCM1863", AudioAdc, cg.Component, i2c.I2CDevice)
pcm1863_input = pcm1863_ns.enum("PCM1863Input")
# The declaration order is the select option order and the C++ enum value of each input
PCM1863_INPUT_ENUM = pcm1863_input.options(
"NONE", "VIN1", "VIN2", "VIN3", "VIN4", "DIFF_1", "DIFF_2", prefix="PCM1863_INPUT_"
)
pcm1863_bits_per_sample = pcm1863_ns.enum("PCM1863BitsPerSample")
PCM1863_BITS_PER_SAMPLE_ENUM = {
16: pcm1863_bits_per_sample.PCM1863_BITS_PER_SAMPLE_16,
20: pcm1863_bits_per_sample.PCM1863_BITS_PER_SAMPLE_20,
24: pcm1863_bits_per_sample.PCM1863_BITS_PER_SAMPLE_24,
32: pcm1863_bits_per_sample.PCM1863_BITS_PER_SAMPLE_32,
}
_validate_bits = cv.float_with_unit("bits", "bit")
CONFIG_SCHEMA = (
cv.Schema(
{
cv.GenerateID(): cv.declare_id(PCM1863),
cv.Optional(CONF_BITS_PER_SAMPLE, default="24bit"): cv.All(
_validate_bits, cv.enum(PCM1863_BITS_PER_SAMPLE_ENUM)
),
cv.Optional(CONF_INPUT, default="VIN1"): cv.enum(
PCM1863_INPUT_ENUM, upper=True
),
cv.Optional(CONF_MIC_GAIN, default="0db"): cv.All(
cv.decibel,
cv.float_range(min=PCM1863_MIC_GAIN_MIN, max=PCM1863_MIC_GAIN_MAX),
),
}
)
.extend(cv.COMPONENT_SCHEMA)
.extend(i2c.i2c_device_schema(0x4A))
)
async def to_code(config: ConfigType) -> None:
var = await i2c.new_i2c_component(config)
cg.add(var.set_bits_per_sample(config[CONF_BITS_PER_SAMPLE]))
cg.add(var.set_input(config[CONF_INPUT]))
cg.add(var.set_mic_gain(config[CONF_MIC_GAIN]))
+96
View File
@@ -0,0 +1,96 @@
#include "pcm1863.h"
#include "pcm1863_const.h"
#include "esphome/core/hal.h"
#include "esphome/core/log.h"
#include "esphome/core/progmem.h"
#include <cmath>
namespace esphome::pcm1863 {
ESPHOME_LOG_TAG(TAG, "pcm1863");
// Indexed by PCM1863BitsPerSample
PROGMEM_STRING_TABLE(BitsPerSampleStrings, "32", "24", "20", "16");
PROGMEM_STRING_TABLE(InputStrings, "NONE", "VIN1", "VIN2", "VIN3", "VIN4", "DIFF_1", "DIFF_2");
// Page select and power up: bits 2:0 clear is the run state, and the reserved bits 7:3
// must be written as 0b01110 or the analog section stops
static constexpr i2c::I2CRegValue PCM1863_INIT[] PROGMEM = {
{PCM1863_REG_PAGE, PCM1863_PAGE_0},
{PCM1863_REG_POWER_CTRL, PCM1863_PWR_CTRL_RSV},
};
void PCM1863::dump_config() {
ESP_LOGCONFIG(TAG,
"PCM1863 audio ADC:\n"
" Bits Per Sample: %s\n"
" Input: %s\n"
" Mic Gain: %.1f dB",
LOG_STR_ARG(BitsPerSampleStrings::get_log_str(this->bits_per_sample_, 0)),
LOG_STR_ARG(InputStrings::get_log_str(this->input_, 0)), this->mic_gain_);
#ifdef USE_PCM1863_SELECT
LOG_SELECT(" ", "Input", this->input_select_);
#endif
}
void PCM1863::setup() {
// Writing PCM1863_RESET to the page selector restores every register to its default
if (!this->setup_check(this->write_byte(PCM1863_REG_PAGE, PCM1863_RESET)))
return;
delay(2);
// The datasheet does not say which page the reset leaves selected, so select page 0 first
if (!this->setup_check(this->write_registers(PCM1863_INIT)))
return;
if (!this->setup_check(this->configure_i2s_format_() && this->configure_input_() && this->configure_mic_gain_()))
return;
this->setup_complete_ = true;
#ifdef USE_PCM1863_SELECT
// Show the input the ADC booted with, so the select does not start out blank
PUBLISH_STATE(this->input_select_, this->input_);
#endif
}
bool PCM1863::set_mic_gain(float mic_gain) {
// Nothing reaches the chip after a failed setup, so report the change as not applied
if (this->is_failed())
return false;
this->mic_gain_ = clamp<float>(mic_gain, PCM1863_MIC_GAIN_MIN, PCM1863_MIC_GAIN_MAX);
if (!this->setup_complete_)
return true;
return this->status_comm_result(this->configure_mic_gain_());
}
bool PCM1863::configure_mic_gain_() {
// The PGA gain registers take a two's complement value in 0.5 dB steps
const auto reg_val = static_cast<uint8_t>(lroundf(this->mic_gain_ / PCM1863_MIC_GAIN_STEP));
return this->write_byte(PCM1863_REG_PGA_VAL_CH1_L, reg_val) && this->write_byte(PCM1863_REG_PGA_VAL_CH1_R, reg_val);
}
bool PCM1863::set_input(PCM1863Input input) {
if (this->is_failed())
return false;
this->input_ = input;
if (!this->setup_complete_)
return true;
return this->status_comm_result(this->configure_input_());
}
bool PCM1863::configure_input_() {
// Bit 6 of both input select registers is reserved and must always be written as 1
const uint8_t mux = this->input_ == PCM1863_INPUT_NONE ? 0 : 1 << (this->input_ - 1);
const uint8_t reg_val = PCM1863_INPUT_SEL_RSV | mux;
return this->write_byte(PCM1863_REG_ADC1_INPUT_SEL_L, reg_val) &&
this->write_byte(PCM1863_REG_ADC1_INPUT_SEL_R, reg_val);
}
bool PCM1863::configure_i2s_format_() {
const uint8_t wlen = this->bits_per_sample_;
const uint8_t reg_val =
(wlen << PCM1863_PCM_CFG_RX_WLEN_SHIFT) | (wlen << PCM1863_PCM_CFG_TX_WLEN_SHIFT) | PCM1863_PCM_CFG_FMT_I2S;
return this->write_byte(PCM1863_REG_PCM_CFG, reg_val);
}
} // namespace esphome::pcm1863
+64
View File
@@ -0,0 +1,64 @@
#pragma once
#include "esphome/components/audio_adc/audio_adc.h"
#include "esphome/components/i2c/i2c.h"
#include "esphome/core/component.h"
#ifdef USE_PCM1863_SELECT
#include "esphome/components/select/select.h"
#endif
#include "pcm1863_const.h"
namespace esphome::pcm1863 {
// Positions of the select options, in the order audio_adc.py declares them
enum PCM1863Input : uint8_t {
PCM1863_INPUT_NONE,
PCM1863_INPUT_VIN1,
PCM1863_INPUT_VIN2,
PCM1863_INPUT_VIN3,
PCM1863_INPUT_VIN4,
PCM1863_INPUT_DIFF_1,
PCM1863_INPUT_DIFF_2,
};
// The word length code of PCM1863_REG_PCM_CFG
enum PCM1863BitsPerSample : uint8_t {
PCM1863_BITS_PER_SAMPLE_32,
PCM1863_BITS_PER_SAMPLE_24,
PCM1863_BITS_PER_SAMPLE_20,
PCM1863_BITS_PER_SAMPLE_16,
};
/// Texas Instruments PCM1863 stereo audio ADC for line and microphone input.
/// The register map and reset sequence follow the datasheet (SLAS831D) and the Linux
/// kernel driver in sound/soc/codecs/pcm186x.c.
class PCM1863 final : public audio_adc::AudioAdc, public Component, public i2c::I2CDevice {
#ifdef USE_PCM1863_SELECT
SUB_SELECT(input)
#endif
public:
void setup() override;
void dump_config() override;
void set_bits_per_sample(PCM1863BitsPerSample bits_per_sample) { this->bits_per_sample_ = bits_per_sample; }
/// Selects the analog input. Takes effect immediately once setup has run.
bool set_input(PCM1863Input input);
bool set_mic_gain(float mic_gain) override;
float mic_gain() override { return this->mic_gain_; }
protected:
bool configure_i2s_format_();
bool configure_mic_gain_();
bool configure_input_();
float mic_gain_{0};
bool setup_complete_{false};
PCM1863BitsPerSample bits_per_sample_{PCM1863_BITS_PER_SAMPLE_24};
PCM1863Input input_{PCM1863_INPUT_VIN1};
};
} // namespace esphome::pcm1863
@@ -0,0 +1,50 @@
#pragma once
#include <cstdint>
namespace esphome::pcm1863 {
// PCM1863 page 0 register addresses.
// Names and layout follow the Texas Instruments PCM186x family register map (SLAS831D).
static constexpr uint8_t PCM1863_REG_PAGE = 0x00; /* Page selector; writing 0xFE triggers a full reset */
static constexpr uint8_t PCM1863_REG_PGA_VAL_CH1_L = 0x01; /* ADC1 left PGA gain, 0.5 dB/LSB, two's complement */
static constexpr uint8_t PCM1863_REG_PGA_VAL_CH1_R = 0x02; /* ADC1 right PGA gain, 0.5 dB/LSB, two's complement */
static constexpr uint8_t PCM1863_REG_ADC1_INPUT_SEL_L = 0x06;
static constexpr uint8_t PCM1863_REG_ADC1_INPUT_SEL_R = 0x07;
static constexpr uint8_t PCM1863_REG_PCM_CFG = 0x0B; /* Word length and serial audio format */
static constexpr uint8_t PCM1863_REG_POWER_CTRL = 0x70; /* Power down, sleep and standby */
// PCM1863_REG_PAGE: the register holds the page number, and the two documented
// commands are selecting a page and resetting every register
static constexpr uint8_t PCM1863_PAGE_0 = 0x00;
static constexpr uint8_t PCM1863_RESET = 0xFE;
// PCM1863_REG_PCM_CFG: receive word length in bits 7:6, transmit word length in bits 3:2,
// serial audio format in bits 1:0. Bit 5 is reserved and bit 4 only applies to TDM; both
// are zero at reset and are written as zero here.
static constexpr uint8_t PCM1863_PCM_CFG_RX_WLEN_SHIFT = 6;
static constexpr uint8_t PCM1863_PCM_CFG_TX_WLEN_SHIFT = 2;
static constexpr uint8_t PCM1863_PCM_CFG_FMT_I2S = 0x00;
// PCM1863_REG_ADC1_INPUT_SEL_L / _R
// Bit 7 selects signal polarity, bit 6 is reserved and must always be written as 1,
// and bits 5:0 pick the analog input. See the PCM186x datasheet, "MUX, MIX, and
// Polarity Input Selection".
static constexpr uint8_t PCM1863_INPUT_SEL_RSV = 0x40; // bit 6, always write 1
// Bits 5:0 select one input: none, VIN1 to VIN4 single-ended (0x01 to 0x08), then the
// differential pairs VIN1/VIN2 (0x10) and VIN4/VIN3 (0x20)
// PCM1863_REG_POWER_CTRL
// Bits 2:0 are power down, sleep and standby; all three are clear in the run state.
// Bits 7:3 are reserved and the datasheet requires them to always be written as 0b01110,
// which is also their reset value. Writing them as zero stops the analog section.
static constexpr uint8_t PCM1863_PWR_CTRL_RSV = 0x70;
// The PGA gain registers hold a two's complement value in 0.5 dB steps,
// from -24 (-12 dB) to +80 (+40 dB)
static constexpr float PCM1863_MIC_GAIN_MIN = -12.0f;
static constexpr float PCM1863_MIC_GAIN_MAX = 40.0f;
static constexpr float PCM1863_MIC_GAIN_STEP = 0.5f;
} // namespace esphome::pcm1863
+32
View File
@@ -0,0 +1,32 @@
import esphome.codegen as cg
from esphome.components import select
import esphome.config_validation as cv
from esphome.const import ENTITY_CATEGORY_CONFIG, ICON_CHIP
from esphome.types import ConfigType
from .audio_adc import CONF_PCM1863_ID, PCM1863, PCM1863_INPUT_ENUM
PCM1863_INPUT_OPTIONS = list(PCM1863_INPUT_ENUM)
CONFIG_SCHEMA = select.select_schema(
select.ApplySelect,
entity_category=ENTITY_CATEGORY_CONFIG,
icon=ICON_CHIP,
).extend(
{
cv.GenerateID(CONF_PCM1863_ID): cv.use_id(PCM1863),
}
)
async def to_code(config: ConfigType) -> None:
cg.add_define("USE_PCM1863_SELECT")
hub = await cg.get_variable(config[CONF_PCM1863_ID])
# The ADC publishes the new option only once the I2C write went through
await select.sub_selects(config, parent=hub).create(
config,
hub.set_input_select,
options=PCM1863_INPUT_OPTIONS,
apply="set_input(static_cast<pcm1863::PCM1863Input>(index))",
publish="on_success",
)
+10
View File
@@ -0,0 +1,10 @@
"""Pioneer WT series mini splits, controlled through the serial port of the WiFi module."""
import esphome.codegen as cg
CODEOWNERS = ["@martinsah"]
DOMAIN = "pioneer_wt"
pioneer_wt_ns = cg.esphome_ns.namespace("pioneer_wt")
CONF_PIONEER_WT_ID = "pioneer_wt_id"
+33
View File
@@ -0,0 +1,33 @@
import esphome.codegen as cg
from esphome.components import climate, uart
import esphome.config_validation as cv
from esphome.types import ConfigType
from . import DOMAIN, pioneer_wt_ns
DEPENDENCIES = ["uart"]
PioneerWT = pioneer_wt_ns.class_(
"PioneerWT", climate.Climate, uart.UARTDevice, cg.Component
)
CONFIG_SCHEMA = (
climate.climate_schema(PioneerWT)
.extend(uart.UART_DEVICE_SCHEMA)
.extend(cv.COMPONENT_SCHEMA)
)
FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
DOMAIN,
baud_rate=115200,
require_tx=True,
require_rx=True,
data_bits=8,
parity="NONE",
stop_bits=1,
)
async def to_code(config: ConfigType) -> None:
var = await uart.new_uart_component(config)
await climate.register_climate(var, config)
@@ -0,0 +1,348 @@
#include "pioneer_wt.h"
#include <cinttypes>
#include <cmath>
#include <cstring>
#include <iterator>
#include "esphome/core/application.h"
#include "esphome/core/hal.h"
#include "esphome/core/log.h"
namespace esphome::pioneer_wt {
ESPHOME_LOG_TAG(TAG, "pioneer_wt");
static constexpr uint32_t RESEND_INTERVAL_MS = 500;
static constexpr uint8_t MAX_ATTEMPTS = 4;
// Ask for a full status again if the AC has reported nothing for this long.
static constexpr uint32_t STATUS_REFRESH_MS = 5 * 60 * 1000;
// Until the first full status has arrived, ask again this often.
static constexpr uint32_t STATUS_RETRY_MS = 30 * 1000;
// A frame arrives in one burst; after a pause this long a partly received frame is dropped.
static constexpr uint32_t RX_GAP_MS = 100;
static constexpr float MIN_TEMPERATURE_C = 16.0f;
static constexpr float MAX_TEMPERATURE_C = 31.0f;
static constexpr uint8_t FAN_SPEED_COUNT = 7;
static constexpr const char *const FAN_SPEED_NAMES[FAN_SPEED_COUNT] PROGMEM = {
"Speed 1", "Speed 2", "Speed 3", "Speed 4", "Speed 5", "Speed 6", "Speed 7"};
// Reply to the AC's once-a-minute check, as the stock module sends it. The last body byte is the
// WiFi signal in dBm; a fixed -48 is enough for the AC.
static constexpr uint8_t PRESENCE_REPLY_FRAME[] PROGMEM = {0xA5, 0x01, 0x00, 0x23, 0x00, 0x00, 0x00, 0x12, 0x47,
0x09, 0x80, 0x0C, 0x02, 0x64, 0xFF, 0xFF, 0xFF, 0xD0};
// Climate mode for each value of ATTR_MODE
static constexpr uint8_t CLIMATE_MODES[] PROGMEM = {
climate::CLIMATE_MODE_HEAT_COOL, climate::CLIMATE_MODE_COOL, climate::CLIMATE_MODE_DRY,
climate::CLIMATE_MODE_FAN_ONLY, climate::CLIMATE_MODE_HEAT,
};
void PioneerWT::setup() {
this->set_supported_custom_fan_modes_static(FAN_SPEED_NAMES, FAN_SPEED_COUNT);
this->request_status_();
#ifdef USE_SWITCH
if (this->display_switch_ != nullptr)
this->display_switch_->restore();
if (this->beeper_switch_ != nullptr)
this->beeper_switch_->restore();
#endif
}
climate::ClimateTraits PioneerWT::traits() {
auto traits = climate::ClimateTraits();
traits.add_feature_flags(climate::CLIMATE_SUPPORTS_CURRENT_TEMPERATURE);
traits.set_supported_modes({climate::CLIMATE_MODE_OFF, climate::CLIMATE_MODE_HEAT_COOL, climate::CLIMATE_MODE_COOL,
climate::CLIMATE_MODE_HEAT, climate::CLIMATE_MODE_DRY, climate::CLIMATE_MODE_FAN_ONLY});
traits.set_supported_fan_modes({climate::CLIMATE_FAN_AUTO});
traits.set_supported_swing_modes({climate::CLIMATE_SWING_OFF, climate::CLIMATE_SWING_VERTICAL});
traits.set_supported_presets({climate::CLIMATE_PRESET_NONE, climate::CLIMATE_PRESET_ECO});
traits.set_visual_min_temperature(MIN_TEMPERATURE_C);
traits.set_visual_max_temperature(MAX_TEMPERATURE_C);
// The AC keeps its setpoint in whole degrees Fahrenheit, so half degrees Celsius would not all be kept.
traits.set_visual_target_temperature_step(1.0f);
traits.set_visual_current_temperature_step(0.1f);
return traits;
}
void PioneerWT::loop() {
const uint32_t now = App.get_loop_component_start_time();
if (const size_t count = this->available()) {
this->last_rx_ = now;
this->read_available(
[this](uint8_t byte) {
if (const size_t len = this->reader_.feed(byte))
this->handle_frame_(this->reader_.frame(), len);
},
count);
if (this->reader_.take_checksum_error()) {
ESP_LOGD(TAG, "Dropped a frame with a wrong checksum");
}
} else if (this->reader_.partial() && now - this->last_rx_ >= RX_GAP_MS) {
// Only on an idle pass: after a slow loop the rest of the frame may already be buffered.
this->reader_.reset();
}
if (!this->queue_.empty() && now - this->last_send_ >= RESEND_INTERVAL_MS)
this->send_pending_();
// The target temperature only arrives in a full status, so it tells whether one has been received.
const uint32_t status_interval = std::isnan(this->target_temperature) ? STATUS_RETRY_MS : STATUS_REFRESH_MS;
if (now - this->last_status_ >= status_interval)
this->request_status_();
}
void PioneerWT::handle_frame_(const uint8_t *frame, size_t len) {
const uint8_t flags = frame[2];
const uint8_t type = frame[3];
const uint8_t seq = frame[4];
const uint8_t ack = frame[5];
const uint8_t *payload = frame + HEADER_SIZE;
const size_t payload_len = len - HEADER_SIZE;
ESP_LOGVV_HEX(TAG, frame, len, MAX_FRAME_SIZE, "RX %s");
if (type == TYPE_REPLY) {
if (!this->queue_.empty() && this->queue_.front().seq == ack) {
if (this->queue_.front().power != POWER_UNCHANGED)
this->acked_power_ = this->queue_.front().power;
// Pop first: the warning log can run automations that queue another command.
this->pop_command_();
this->status_clear_warning();
this->last_send_ = 0; // send the next one right away
}
return;
}
if (type != TYPE_DATA || payload_len < 2)
return;
const uint8_t msg_class = payload[0];
if (flags & FLAG_WANT_ACK)
this->write_frame_(FLAG_WANT_ACK, TYPE_REPLY, 0, seq, CLASS_REPLY, msg_class, nullptr, 0);
if (msg_class != CLASS_STATUS)
return;
if (payload_len == 2) {
if (!(flags & FLAG_WANT_ACK))
this->write_array_progmem(PRESENCE_REPLY_FRAME, sizeof(PRESENCE_REPLY_FRAME));
return;
}
this->handle_status_(payload + 2, payload_len - 2);
// Reports count only once a full status has arrived, so the boot request is repeated until one does.
if (!std::isnan(this->target_temperature))
this->last_status_ = App.get_loop_component_start_time();
}
void PioneerWT::handle_status_(const uint8_t *body, size_t len) {
AttributeReader attrs(body, len);
bool changed = false;
while (attrs.next()) {
const uint32_t v = attrs.value();
switch (attrs.id()) {
case ATTR_POWER:
this->power_ = v != 0;
this->acked_power_ = POWER_UNCHANGED;
break;
case ATTR_MODE:
if (v < std::size(CLIMATE_MODES)) {
this->ac_mode_ = v;
} else {
ESP_LOGD(TAG, "Unknown mode %" PRIu32, v);
}
break;
case ATTR_SETPOINT_F: {
const float target = fahrenheit_to_celsius(v);
changed |= target != this->target_temperature;
this->target_temperature = target;
break;
}
case ATTR_INDOOR_TEMP_C100: {
const float current = static_cast<float>(v) / 100.0f;
changed |= current != this->current_temperature;
this->current_temperature = current;
break;
}
case ATTR_FAN_SPEED:
if (v == 0) {
changed |= this->set_fan_mode_(climate::CLIMATE_FAN_AUTO);
} else if (v <= FAN_SPEED_COUNT) {
changed |= this->set_custom_fan_mode_(FAN_SPEED_NAMES[v - 1]);
} else {
ESP_LOGD(TAG, "Unknown fan speed %" PRIu32, v);
}
break;
case ATTR_SWING_VERTICAL: {
const auto swing = v == SWING_ON ? climate::CLIMATE_SWING_VERTICAL : climate::CLIMATE_SWING_OFF;
changed |= swing != this->swing_mode;
this->swing_mode = swing;
break;
}
case ATTR_ECO:
changed |= this->set_preset_(v ? climate::CLIMATE_PRESET_ECO : climate::CLIMATE_PRESET_NONE);
break;
#ifdef USE_SWITCH
case ATTR_DISPLAY:
PUBLISH_STATE(this->display_switch_, v != 0);
break;
case ATTR_BEEPER:
PUBLISH_STATE(this->beeper_switch_, v != 0);
break;
#endif
default:
break;
}
}
if (attrs.stopped_on_unknown()) {
ESP_LOGD(TAG, "Status attribute %04X has an unknown size; ignored the rest of the frame", attrs.id());
}
const auto mode = this->power_ ? static_cast<climate::ClimateMode>(progmem_read_byte(&CLIMATE_MODES[this->ac_mode_]))
: climate::CLIMATE_MODE_OFF;
changed |= mode != this->mode;
this->mode = mode;
if (changed)
this->publish_state();
}
void PioneerWT::control(const climate::ClimateCall &call) {
uint8_t body[MAX_BODY_SIZE];
uint8_t *p = body;
int8_t power = POWER_UNCHANGED;
if (call.get_mode().has_value()) {
const auto mode = *call.get_mode();
if (mode == climate::CLIMATE_MODE_OFF) {
power = 0;
p = put_attr(p, ATTR_POWER, 0);
} else {
uint8_t ac_mode = 0;
for (size_t i = 0; i < std::size(CLIMATE_MODES); i++) {
if (progmem_read_byte(&CLIMATE_MODES[i]) == mode) {
ac_mode = i;
break;
}
}
// Queued commands count: an "off" still waiting to be sent is followed by a power on.
if (!this->wanted_power_(this->queue_.size() == TX_QUEUE_SIZE)) {
power = 1;
p = put_attr(p, ATTR_POWER, 1);
}
p = put_attr(p, ATTR_MODE, ac_mode);
}
}
if (call.get_target_temperature().has_value()) {
// Automations can ask for any value; the visual range is not enforced for them.
const float celsius = clamp(*call.get_target_temperature(), MIN_TEMPERATURE_C, MAX_TEMPERATURE_C);
p = put_be32(put_be16(p, ATTR_SETPOINT_F), lroundf(celsius_to_fahrenheit(celsius)));
}
// The app always sends fan speed with these companions; match it exactly.
int fan_speed = -1;
if (call.get_fan_mode().has_value() && *call.get_fan_mode() == climate::CLIMATE_FAN_AUTO) {
fan_speed = 0;
} else if (call.has_custom_fan_mode()) {
// The call holds the pointer from FAN_SPEED_NAMES, so the pointers can be compared.
const char *name = call.get_custom_fan_mode().c_str();
for (uint8_t i = 0; i < FAN_SPEED_COUNT; i++) {
if (name == FAN_SPEED_NAMES[i]) {
fan_speed = i + 1;
break;
}
}
}
if (fan_speed >= 0) {
p = put_attr(p, ATTR_FAN_EXTRA_1, 0);
p = put_attr(p, ATTR_FAN_EXTRA_2, 0);
p = put_attr(p, ATTR_FAN_SPEED, fan_speed);
p = put_attr(p, ATTR_FAN_AUTO, fan_speed == 0);
}
if (call.get_swing_mode().has_value()) {
const bool swing = *call.get_swing_mode() == climate::CLIMATE_SWING_VERTICAL;
p = put_attr(p, ATTR_SWING_VERTICAL, swing ? SWING_ON : SWING_OFF);
}
if (call.get_preset().has_value())
p = put_attr(p, ATTR_ECO, *call.get_preset() == climate::CLIMATE_PRESET_ECO);
if (p != body)
this->queue_command_(CLASS_COMMAND, body, p - body, power);
// State is published when the AC reports the new values back.
}
void PioneerWT::send_setting_(uint16_t attr, bool on) {
uint8_t body[3];
put_attr(body, attr, on);
this->queue_command_(CLASS_COMMAND, body, sizeof(body));
}
void PioneerWT::request_status_() {
// Asks the AC to send every setting, as the stock module does at boot.
static constexpr uint8_t REQUEST_ALL[] = {0xFF, 0xFF};
this->queue_command_(CLASS_NETWORK, REQUEST_ALL, sizeof(REQUEST_ALL));
this->last_status_ = App.get_loop_component_start_time();
}
void PioneerWT::queue_command_(uint8_t msg_class, const uint8_t *body, size_t len, int8_t power) {
if (this->queue_.size() == TX_QUEUE_SIZE) {
ESP_LOGW(TAG, "Command queue full; dropping the oldest command");
this->pop_command_();
}
PendingCommand pending{msg_class, this->next_seq_++, static_cast<uint8_t>(len), power, {}};
std::memcpy(pending.body.data(), body, len);
this->queue_.push(pending);
if (this->next_seq_ == 0)
this->next_seq_ = 1;
}
void PioneerWT::pop_command_() {
this->queue_.pop();
this->attempts_ = 0;
}
bool PioneerWT::wanted_power_(bool skip_head) const {
// An acknowledged power change counts until the AC reports the power
bool power = this->acked_power_ == POWER_UNCHANGED ? this->power_ : this->acked_power_;
for (const PendingCommand &pending : this->queue_) {
if (skip_head) {
skip_head = false;
continue;
}
if (pending.power != POWER_UNCHANGED)
power = pending.power;
}
return power;
}
void PioneerWT::send_pending_() {
const PendingCommand &pending = this->queue_.front();
if (this->attempts_ >= MAX_ATTEMPTS) {
const uint8_t seq = pending.seq;
// Pop first: the warning log can run automations that queue another command.
this->pop_command_();
ESP_LOGD(TAG, "No acknowledgement for command seq %02X; giving up", seq);
this->status_set_warning(LOG_STR("No acknowledgement"));
return;
}
this->attempts_++;
this->write_frame_(FLAG_WANT_ACK, TYPE_DATA, pending.seq, 0, pending.msg_class, pending.msg_class,
pending.body.data(), pending.len);
this->last_send_ = App.get_loop_component_start_time();
}
void PioneerWT::write_frame_(uint8_t flags, uint8_t type, uint8_t seq, uint8_t ack, uint8_t class_1, uint8_t class_2,
const uint8_t *body, size_t len) {
uint8_t frame[HEADER_SIZE + 2 + MAX_BODY_SIZE];
const size_t total = build_frame(frame, flags, type, seq, ack, class_1, class_2, body, len);
ESP_LOGVV_HEX(TAG, frame, total, sizeof(frame), "TX %s");
this->write_array(frame, total);
}
void PioneerWT::dump_config() {
LOG_CLIMATE("", "Pioneer WT", this);
#ifdef USE_SWITCH
LOG_SWITCH(" ", "Display", this->display_switch_);
LOG_SWITCH(" ", "Beeper", this->beeper_switch_);
#endif
}
} // namespace esphome::pioneer_wt
@@ -0,0 +1,85 @@
#pragma once
#include <array>
#include <cstdint>
#include "esphome/components/climate/climate.h"
#include "esphome/components/uart/uart.h"
#include "esphome/core/component.h"
#include "esphome/core/defines.h"
#include "esphome/core/helpers.h"
#ifdef USE_SWITCH
#include "esphome/components/switch/switch.h"
#endif
#include "pioneer_wt_protocol.h"
namespace esphome::pioneer_wt {
// The largest body control() builds is 30 bytes.
static constexpr size_t MAX_BODY_SIZE = 32;
static constexpr size_t TX_QUEUE_SIZE = 4;
class PioneerWT final : public climate::Climate, public uart::UARTDevice, public Component {
public:
void setup() override;
void loop() override;
void dump_config() override;
/// Turns the indoor unit's front display on or off.
void set_display_on(bool on) { this->send_setting_(ATTR_DISPLAY, on); }
/// Turns the beep that confirms each command on or off.
void set_beeper_on(bool on) { this->send_setting_(ATTR_BEEPER, on); }
#ifdef USE_SWITCH
SUB_SWITCH(display)
SUB_SWITCH(beeper)
#endif
protected:
climate::ClimateTraits traits() override;
void control(const climate::ClimateCall &call) override;
void handle_frame_(const uint8_t *frame, size_t len);
void handle_status_(const uint8_t *body, size_t len);
void write_frame_(uint8_t flags, uint8_t type, uint8_t seq, uint8_t ack, uint8_t class_1, uint8_t class_2,
const uint8_t *body, size_t len);
/// Queues a data frame that the AC must acknowledge; it is resent until it is.
void queue_command_(uint8_t msg_class, const uint8_t *body, size_t len, int8_t power = POWER_UNCHANGED);
void send_pending_();
/// Removes the command at the head of the queue.
void pop_command_();
/// Power once the queued commands are applied; skip_head leaves out a head about to be dropped.
bool wanted_power_(bool skip_head) const;
/// Queues a command that sets one on/off attribute.
void send_setting_(uint16_t attr, bool on);
void request_status_();
static constexpr int8_t POWER_UNCHANGED = -1;
struct PendingCommand {
uint8_t msg_class;
uint8_t seq;
uint8_t len;
// Power the command sets: 0, 1 or POWER_UNCHANGED
int8_t power;
std::array<uint8_t, MAX_BODY_SIZE> body;
};
uint32_t last_send_{0};
// Time of the last status report (counted once a full one has arrived), or of the last request for one
uint32_t last_status_{0};
uint32_t last_rx_{0};
PacketReader reader_;
StaticRingBuffer<PendingCommand, TX_QUEUE_SIZE> queue_;
// Send attempts of the command at the head of the queue
uint8_t attempts_{0};
uint8_t next_seq_{1};
// Power the AC last reported
bool power_{false};
// Power set by an acknowledged command, until the next power report: 0, 1 or POWER_UNCHANGED
int8_t acked_power_{POWER_UNCHANGED};
// Value of ATTR_MODE: 0 auto, 1 cool, 2 dry, 3 fan, 4 heat
uint8_t ac_mode_{0};
};
} // namespace esphome::pioneer_wt
@@ -0,0 +1,147 @@
#include "pioneer_wt_protocol.h"
#include <cstring>
#include "esphome/core/hal.h"
namespace esphome::pioneer_wt {
uint16_t frame_crc(const uint8_t *frame, size_t len) {
const uint16_t head = crc16be(frame, 8);
return crc16be(frame + HEADER_SIZE, len - HEADER_SIZE, head);
}
size_t PacketReader::feed(uint8_t byte) {
if (this->pos_ == 0 && byte != 0xA5)
return 0;
if (this->pos_ == 1 && byte != 0x01) {
this->pos_ = byte == 0xA5 ? 1 : 0;
return 0;
}
this->buf_[this->pos_++] = byte;
if (this->pos_ < 8)
return 0;
const uint8_t len = this->buf_[7];
if (len < HEADER_SIZE) {
this->pos_ = 0;
return 0;
}
if (this->pos_ < len)
return 0;
this->pos_ = 0;
if (frame_crc(this->buf_.data(), len) != encode_uint16(this->buf_[8], this->buf_[9])) {
this->checksum_error_ = true;
return 0;
}
return len;
}
enum class AttrKind : uint8_t {
ATTR_KIND_UNKNOWN,
ATTR_KIND_ONE_BYTE,
ATTR_KIND_FOUR_BYTES,
// One count byte, then that many bytes
ATTR_KIND_COUNT_PREFIXED,
// Two length bytes, then that many bytes
ATTR_KIND_LENGTH_PREFIXED,
};
// The reader must know how every attribute is stored to step over the ones it does not use.
// The IDs are grouped by storage.
static constexpr uint16_t ONE_BYTE_IDS[] PROGMEM = {
0x0001, 0x0005, 0x000C, 0x000D, 0x000E, 0x0011, 0x0012, 0x0013, 0x0017, 0x001E, 0x0022, 0x0025, 0x0026, 0x0027,
0x002D, 0x0035, 0x005E, 0x0073, 0x0074, 0x00A4, 0x00C9, 0x00DF, 0x0148, 0x015E, 0x0173, 0x0224, 0x0225,
};
static constexpr uint16_t FOUR_BYTE_IDS[] PROGMEM = {
0x0002, 0x0003, 0x003D, 0x0041, 0x0042, 0x005C, 0x0060, 0x0064, 0x0065,
0x0072, 0x0095, 0x00BD, 0x00BE, 0x00BF, 0x00C0, 0x0221, 0x0222, 0x0227,
};
static constexpr uint16_t COUNT_PREFIXED_IDS[] PROGMEM = {0x0038, 0x0039};
static constexpr uint16_t LENGTH_PREFIXED_IDS[] PROGMEM = {0x00FA, 0x00FB, 0x0147, 0x0223};
template<size_t N> static bool contains(const uint16_t (&ids)[N], uint16_t id) {
for (const uint16_t &entry : ids) {
if (progmem_read_uint16(&entry) == id)
return true;
}
return false;
}
static AttrKind attr_kind(uint16_t id) {
if (contains(ONE_BYTE_IDS, id))
return AttrKind::ATTR_KIND_ONE_BYTE;
if (contains(FOUR_BYTE_IDS, id))
return AttrKind::ATTR_KIND_FOUR_BYTES;
if (contains(COUNT_PREFIXED_IDS, id))
return AttrKind::ATTR_KIND_COUNT_PREFIXED;
if (contains(LENGTH_PREFIXED_IDS, id))
return AttrKind::ATTR_KIND_LENGTH_PREFIXED;
return AttrKind::ATTR_KIND_UNKNOWN;
}
bool AttributeReader::next() {
if (this->pos_ + 2 > this->len_)
return false;
const uint8_t *data = this->data_;
const uint16_t id = encode_uint16(data[this->pos_], data[this->pos_ + 1]);
size_t start = this->pos_ + 2;
size_t value_len;
const AttrKind kind = attr_kind(id);
switch (kind) {
case AttrKind::ATTR_KIND_ONE_BYTE:
value_len = 1;
break;
case AttrKind::ATTR_KIND_FOUR_BYTES:
value_len = 4;
break;
case AttrKind::ATTR_KIND_COUNT_PREFIXED:
if (start + 1 > this->len_)
return false;
value_len = data[start++];
break;
case AttrKind::ATTR_KIND_LENGTH_PREFIXED:
if (start + 2 > this->len_)
return false;
value_len = encode_uint16(data[start], data[start + 1]);
start += 2;
break;
default:
this->id_ = id;
this->unknown_ = true;
return false;
}
if (start + value_len > this->len_)
return false;
this->id_ = id;
const uint8_t *v = data + start;
if (kind == AttrKind::ATTR_KIND_ONE_BYTE) {
this->value_ = v[0];
} else if (kind == AttrKind::ATTR_KIND_FOUR_BYTES) {
this->value_ = encode_uint32(v[0], v[1], v[2], v[3]);
} else {
this->value_ = 0;
}
this->pos_ = start + value_len;
return true;
}
size_t build_frame(uint8_t *out, uint8_t flags, uint8_t type, uint8_t seq, uint8_t ack, uint8_t class_1,
uint8_t class_2, const uint8_t *body, size_t len) {
const size_t total = HEADER_SIZE + 2 + len;
out[0] = 0xA5;
out[1] = 0x01;
out[2] = flags;
out[3] = type;
out[4] = seq;
out[5] = ack;
out[6] = 0x00;
out[7] = total;
out[HEADER_SIZE] = class_1;
out[HEADER_SIZE + 1] = class_2;
if (len)
std::memcpy(out + HEADER_SIZE + 2, body, len);
put_be16(out + 8, frame_crc(out, total));
return total;
}
} // namespace esphome::pioneer_wt
@@ -0,0 +1,102 @@
#pragma once
#include <array>
#include <cstddef>
#include <cstdint>
#include "esphome/core/helpers.h"
namespace esphome::pioneer_wt {
// Frame layout: A5 01 | flags | type | seq | ack | 00 | len | crc_hi crc_lo | class class | body
static constexpr size_t HEADER_SIZE = 10;
// The length byte counts the whole frame.
static constexpr size_t MAX_FRAME_SIZE = 255;
static constexpr uint8_t FLAG_NO_ACK = 0x00;
static constexpr uint8_t FLAG_WANT_ACK = 0x01;
static constexpr uint8_t TYPE_DATA = 0x21;
static constexpr uint8_t TYPE_REPLY = 0x23;
static constexpr uint8_t CLASS_COMMAND = 0x0A;
static constexpr uint8_t CLASS_NETWORK = 0x0B;
static constexpr uint8_t CLASS_STATUS = 0x0C;
// First class byte of a reply
static constexpr uint8_t CLASS_REPLY = 0x80;
// Attribute IDs
static constexpr uint16_t ATTR_POWER = 0x0001;
static constexpr uint16_t ATTR_SETPOINT_C100 = 0x0002;
static constexpr uint16_t ATTR_INDOOR_TEMP_C100 = 0x0003;
static constexpr uint16_t ATTR_FAN_SPEED = 0x0005;
static constexpr uint16_t ATTR_SWING_VERTICAL = 0x0011;
static constexpr uint16_t ATTR_MODE = 0x0012;
static constexpr uint16_t ATTR_ECO = 0x0013;
static constexpr uint16_t ATTR_DISPLAY = 0x001E;
static constexpr uint16_t ATTR_BEEPER = 0x0025;
static constexpr uint16_t ATTR_FAN_AUTO = 0x0073;
static constexpr uint16_t ATTR_FAN_EXTRA_1 = 0x0224;
static constexpr uint16_t ATTR_FAN_EXTRA_2 = 0x0225;
static constexpr uint16_t ATTR_SETPOINT_F = 0x0227;
static constexpr uint8_t SWING_ON = 0x01;
static constexpr uint8_t SWING_OFF = 0x08;
/// CRC-16/XMODEM over a whole frame, skipping the two checksum bytes at offset 8.
uint16_t frame_crc(const uint8_t *frame, size_t len);
/// Collects bytes from the serial line into complete frames with a valid checksum.
class PacketReader final {
public:
/// Feeds one byte. Returns the frame length once a complete, valid frame is in frame().
size_t feed(uint8_t byte);
const uint8_t *frame() const { return this->buf_.data(); }
/// True while part of a frame has been collected.
bool partial() const { return this->pos_ != 0; }
/// Drops a partly collected frame, so the next byte can start a new one.
void reset() { this->pos_ = 0; }
/// True once after a complete frame was dropped for a wrong checksum.
bool take_checksum_error() {
const bool error = this->checksum_error_;
this->checksum_error_ = false;
return error;
}
protected:
std::array<uint8_t, MAX_FRAME_SIZE> buf_{};
uint8_t pos_{0};
bool checksum_error_{false};
};
/// Walks the attribute list in a status body. Stops at the first ID whose size is unknown.
class AttributeReader final {
public:
AttributeReader(const uint8_t *data, size_t len) : data_(data), len_(len) {}
/// Moves to the next attribute. Returns false at the end of the body or at an unknown ID.
bool next();
uint16_t id() const { return this->id_; }
uint32_t value() const { return this->value_; }
/// True when the walk stopped early on an ID of unknown size.
bool stopped_on_unknown() const { return this->unknown_; }
protected:
const uint8_t *data_;
size_t len_;
size_t pos_{0};
uint32_t value_{0};
uint16_t id_{0};
bool unknown_{false};
};
/// Builds a frame into out, which must hold HEADER_SIZE + 2 + len bytes. Returns the frame length.
size_t build_frame(uint8_t *out, uint8_t flags, uint8_t type, uint8_t seq, uint8_t ack, uint8_t class_1,
uint8_t class_2, const uint8_t *body, size_t len);
/// Writes a one-byte attribute (2-byte ID, then the value) at p. Returns the new end.
inline uint8_t *put_attr(uint8_t *p, uint16_t id, uint8_t value) {
p = put_be16(p, id);
*p++ = value;
return p;
}
} // namespace esphome::pioneer_wt
+37
View File
@@ -0,0 +1,37 @@
import esphome.codegen as cg
from esphome.components import switch
import esphome.config_validation as cv
from esphome.const import CONF_BEEPER, CONF_DISPLAY, ENTITY_CATEGORY_CONFIG
from esphome.types import ConfigType
from . import CONF_PIONEER_WT_ID
from .climate import PioneerWT
ICON_LED_ON = "mdi:led-on"
ICON_VOLUME_HIGH = "mdi:volume-high"
def _switch_schema(icon: str) -> cv.Schema:
return switch.switch_schema(
switch.ApplySwitch,
icon=icon,
entity_category=ENTITY_CATEGORY_CONFIG,
default_restore_mode="DISABLED",
)
CONFIG_SCHEMA = cv.Schema(
{
cv.GenerateID(CONF_PIONEER_WT_ID): cv.use_id(PioneerWT),
cv.Optional(CONF_DISPLAY): _switch_schema(ICON_LED_ON),
cv.Optional(CONF_BEEPER): _switch_schema(ICON_VOLUME_HIGH),
}
)
async def to_code(config: ConfigType) -> None:
hub = await cg.get_variable(config[CONF_PIONEER_WT_ID])
switches = switch.sub_switches(config, parent=hub)
# No publish: the switch state follows what the AC reports back.
await switches(CONF_DISPLAY, hub.set_display_switch, apply="set_display_on(state)")
await switches(CONF_BEEPER, hub.set_beeper_switch, apply="set_beeper_on(state)")
+11 -13
View File
@@ -10,12 +10,10 @@ CODEOWNERS = ["@kahrendt"]
qwiic_pir_ns = cg.esphome_ns.namespace("qwiic_pir")
DebounceMode = qwiic_pir_ns.enum("DebounceMode")
DEBOUNCE_MODE_OPTIONS = {
"RAW": DebounceMode.RAW_DEBOUNCE_MODE,
"NATIVE": DebounceMode.NATIVE_DEBOUNCE_MODE,
"HYBRID": DebounceMode.HYBRID_DEBOUNCE_MODE,
}
DebounceMode = qwiic_pir_ns.enum("DebounceMode", is_class=True)
DEBOUNCE_MODE_OPTIONS = DebounceMode.options(
"RAW", "NATIVE", "HYBRID", prefix="DEBOUNCE_MODE_"
)
CONF_DEBOUNCE_MODE = "debounce_mode"
@@ -47,12 +45,12 @@ CONFIG_SCHEMA = cv.All(
async def to_code(config: ConfigType) -> None:
var = await binary_sensor.new_binary_sensor(config)
# Without a debounce time the device is set to 1 ms; NATIVE is the only mode that takes one
debounce = config.get(CONF_DEBOUNCE)
var = await binary_sensor.new_binary_sensor(
config,
config[CONF_DEBOUNCE_MODE],
1 if debounce is None else debounce.total_milliseconds,
)
await cg.register_component(var, config)
await i2c.register_i2c_device(var, config)
if debounce_time_setting := config.get(CONF_DEBOUNCE):
cg.add(var.set_debounce_time(debounce_time_setting.total_milliseconds))
else:
cg.add(var.set_debounce_time(1)) # default to 1 ms if not configured
cg.add(var.set_debounce_mode(config[CONF_DEBOUNCE_MODE]))
+51 -65
View File
@@ -1,99 +1,85 @@
#include "qwiic_pir.h"
#include "esphome/core/log.h"
#include "esphome/core/progmem.h"
namespace esphome::qwiic_pir {
ESPHOME_LOG_TAG(TAG, "qwiic_pir");
static constexpr uint8_t REG_CHIP_ID = 0x00;
static constexpr uint8_t REG_EVENT_STATUS = 0x03;
static constexpr uint8_t REG_DEBOUNCE_TIME = 0x05; // milliseconds, 16 bits little endian
static constexpr uint8_t DEVICE_ID = 0x72;
// REG_EVENT_STATUS bits
static constexpr uint8_t EVENT_RAW_READING = 0x01; // raw state of the PIR sensor
static constexpr uint8_t EVENT_AVAILABLE = 0x02; // a debounced object was detected or removed
static constexpr uint8_t EVENT_OBJECT_REMOVED = 0x04; // a debounced object is no longer detected
static constexpr uint8_t EVENT_OBJECT_DETECTED = 0x08; // a debounced object has been detected
// Indexed by DebounceMode
PROGMEM_STRING_TABLE(DebounceModeStrings, "RAW", "NATIVE", "HYBRID");
void QwiicPIRComponent::setup() {
if (!this->check_chip_id(this, QWIIC_PIR_CHIP_ID, QWIIC_PIR_DEVICE_ID))
if (!this->check_chip_id(this, REG_CHIP_ID, DEVICE_ID))
return;
if (!this->setup_check(this->write_byte_16(QWIIC_PIR_DEBOUNCE_TIME, this->debounce_time_),
if (!this->setup_check(this->write_byte_16_le(REG_DEBOUNCE_TIME, this->debounce_time_),
LOG_STR("Failed to configure debounce time")))
return;
if (this->debounce_mode_ == NATIVE_DEBOUNCE_MODE) {
// Publish the starting raw state of the PIR sensor
// If NATIVE mode, the binary_sensor state would be unknown until a motion event
if (!this->setup_check(this->read_byte(QWIIC_PIR_EVENT_STATUS, &this->event_register_.reg),
LOG_STR("Failed to read initial state")))
if (this->debounce_mode_ == DebounceMode::DEBOUNCE_MODE_NATIVE) {
// NATIVE only publishes on motion events, so start from the raw state
uint8_t event;
if (!this->setup_check(this->read_byte(REG_EVENT_STATUS, &event), LOG_STR("Failed to read initial state")))
return;
this->publish_state(this->event_register_.raw_reading);
this->publish_state((event & EVENT_RAW_READING) != 0);
}
}
void QwiicPIRComponent::loop() {
// Read Event Register
if (!this->read_byte(QWIIC_PIR_EVENT_STATUS, &this->event_register_.reg)) {
ESP_LOGW(TAG, ESP_LOG_MSG_COMM_FAIL);
uint8_t event;
if (!this->status_comm_check(this->read_byte(REG_EVENT_STATUS, &event)))
return;
switch (this->debounce_mode_) {
case DebounceMode::DEBOUNCE_MODE_HYBRID:
// The device debounces for 1 ms and ESPHome filters do the rest; any event means motion since the last loop
this->publish_state((event & (EVENT_RAW_READING | EVENT_AVAILABLE)) != 0);
break;
case DebounceMode::DEBOUNCE_MODE_NATIVE:
// The device's own debounce, as in SparkFun's Example2_PrintPIRStatus; it often misses objects being removed
if (event & EVENT_AVAILABLE) {
if (event & EVENT_OBJECT_DETECTED)
this->publish_state(true);
if (event & EVENT_OBJECT_REMOVED)
this->publish_state(false);
}
break;
case DebounceMode::DEBOUNCE_MODE_RAW:
// Can miss a very short detection when the loop is slow
this->publish_state((event & EVENT_RAW_READING) != 0);
break;
}
if (this->debounce_mode_ == HYBRID_DEBOUNCE_MODE) {
// Use a combination of the raw sensor reading and the device's event detection to determine state
// - The device is hardcoded to use a debounce time of 1 ms in this mode
// - Any event, even if it is object_removed, implies motion was active since the last loop, so publish true
// - Use ESPHome's built-in filters for debouncing
this->publish_state(this->event_register_.raw_reading || this->event_register_.event_available);
if (this->event_register_.event_available) {
this->clear_events_();
}
} else if (this->debounce_mode_ == NATIVE_DEBOUNCE_MODE) {
// Uses the device's firmware to debounce the signal
// - Follows the logic of SparkFun's example implementation:
// https://github.com/sparkfun/SparkFun_Qwiic_PIR_Arduino_Library/blob/master/examples/Example2_PrintPIRStatus/Example2_PrintPIRStatus.ino
// (accessed July 2023)
// - Is unreliable at detecting an object being removed, especially at debounce rates even slightly large
if (this->event_register_.event_available) {
// If an object is detected, publish true
if (this->event_register_.object_detected)
this->publish_state(true);
// If an object has been removed, publish false
if (this->event_register_.object_removed)
this->publish_state(false);
this->clear_events_();
}
} else if (this->debounce_mode_ == RAW_DEBOUNCE_MODE) {
// Publishes the raw PIR sensor reading with no further logic
// - May miss a very short motion detection if the ESP's loop time is slow
this->publish_state(this->event_register_.raw_reading);
}
// HYBRID and NATIVE clear a handled event; the last bus step of the poll decides the warning
bool ok = true;
if (this->debounce_mode_ != DebounceMode::DEBOUNCE_MODE_RAW && (event & EVENT_AVAILABLE))
ok = this->write_byte(REG_EVENT_STATUS, 0x00);
this->status_comm_result(ok);
}
void QwiicPIRComponent::dump_config() {
static const char *const RAW = "RAW";
static const char *const NATIVE = "NATIVE";
static const char *const HYBRID = "HYBRID";
const char *debounce_mode_str = RAW;
if (this->debounce_mode_ == NATIVE_DEBOUNCE_MODE) {
debounce_mode_str = NATIVE;
} else if (this->debounce_mode_ == HYBRID_DEBOUNCE_MODE) {
debounce_mode_str = HYBRID;
}
ESP_LOGCONFIG(TAG,
"Qwiic PIR:\n"
" Debounce Mode: %s",
debounce_mode_str);
if (this->debounce_mode_ == NATIVE_DEBOUNCE_MODE) {
LOG_STR_ARG(DebounceModeStrings::get_log_str(static_cast<uint8_t>(this->debounce_mode_), 0)));
if (this->debounce_mode_ == DebounceMode::DEBOUNCE_MODE_NATIVE) {
ESP_LOGCONFIG(TAG, " Debounce Time: %ums", this->debounce_time_);
}
LOG_I2C_DEVICE(this);
LOG_BINARY_SENSOR(" ", "Binary Sensor", this);
}
void QwiicPIRComponent::clear_events_() {
// Clear event status register
if (!this->write_byte(QWIIC_PIR_EVENT_STATUS, 0x00)) {
ESP_LOGW(TAG, "Failed to clear events");
}
}
} // namespace esphome::qwiic_pir
+11 -35
View File
@@ -2,8 +2,8 @@
* Adds support for Qwiic PIR motion sensors that communicate over an I2C bus.
* These sensors use Sharp PIR motion sensors to detect motion. A firmware running on an ATTiny84 translates the digital
* output to I2C communications.
* ATTiny84 firmware: https://github.com/sparkfun/Qwiic_PIR (accessed July 2023)
* SparkFun's Arduino library: https://github.com/sparkfun/SparkFun_Qwiic_PIR_Arduino_Library (accessed July 2023)
* ATTiny84 firmware: https://github.com/sparkfun/Qwiic_PIR
* SparkFun's Arduino library: https://github.com/sparkfun/SparkFun_Qwiic_PIR_Arduino_Library
*/
#pragma once
@@ -14,48 +14,24 @@
namespace esphome::qwiic_pir {
// Qwiic PIR I2C Register Addresses
enum {
QWIIC_PIR_CHIP_ID = 0x00,
QWIIC_PIR_EVENT_STATUS = 0x03,
QWIIC_PIR_DEBOUNCE_TIME = 0x05, // uint16_t debounce time in milliseconds
enum class DebounceMode : uint8_t {
DEBOUNCE_MODE_RAW,
DEBOUNCE_MODE_NATIVE,
DEBOUNCE_MODE_HYBRID,
};
enum DebounceMode {
RAW_DEBOUNCE_MODE,
NATIVE_DEBOUNCE_MODE,
HYBRID_DEBOUNCE_MODE,
};
static const uint8_t QWIIC_PIR_DEVICE_ID = 0x72;
class QwiicPIRComponent final : public Component, public i2c::I2CDevice, public binary_sensor::BinarySensor {
public:
QwiicPIRComponent(DebounceMode debounce_mode, uint16_t debounce_time)
: debounce_time_(debounce_time), debounce_mode_(debounce_mode) {}
void setup() override;
void loop() override;
void dump_config() override;
void set_debounce_time(uint16_t debounce_time) { this->debounce_time_ = debounce_time; }
void set_debounce_mode(DebounceMode mode) { this->debounce_mode_ = mode; }
protected:
uint16_t debounce_time_{};
DebounceMode debounce_mode_{};
union {
struct {
bool raw_reading : 1; // raw state of PIR sensor
bool event_available : 1; // a debounced object has been detected or removed
bool object_removed : 1; // a debounced object is no longer detected
bool object_detected : 1; // a debounced object has been detected
bool : 4;
};
uint8_t reg;
} event_register_ = {.reg = 0};
void clear_events_();
uint16_t debounce_time_;
DebounceMode debounce_mode_;
};
} // namespace esphome::qwiic_pir
+1 -1
View File
@@ -382,7 +382,7 @@ async def to_code(config: ConfigType) -> None:
"board_build.filesystem_size", "0m" if CORE.testing_mode else "1m"
)
ver: cv.Version = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
ver = CORE.framework_version
cg.add_define(
"USE_ARDUINO_VERSION_CODE",
cg.RawExpression(f"VERSION_CODE({ver.major}, {ver.minor}, {ver.patch})"),
-8
View File
@@ -2,10 +2,6 @@
#include "esphome/core/log.h"
#include "esphome/core/hal.h"
#ifdef USE_ESP8266
#include <Wire.h>
#endif
namespace esphome::scd30 {
ESPHOME_LOG_TAG(TAG, "scd30");
@@ -27,10 +23,6 @@ static const uint16_t SCD30_CMD_TEMPERATURE_OFFSET = 0x5403;
static const uint16_t SCD30_CMD_SOFT_RESET = 0xD304;
void SCD30Component::setup() {
#ifdef USE_ESP8266
Wire.setClockStretchLimit(150000);
#endif
/// Firmware version identification
uint16_t raw_firmware_version[3];
if (!this->setup_check(this->get_register(SCD30_CMD_GET_FIRMWARE_VERSION, raw_firmware_version, 3),
+1 -3
View File
@@ -26,8 +26,6 @@ from esphome.const import (
CONF_SECONDS,
CONF_TIMEZONE,
CONF_TRIGGER_ID,
KEY_CORE,
KEY_FRAMEWORK_VERSION,
PLATFORM_BK72XX,
PLATFORM_ESP32,
PLATFORM_ESP8266,
@@ -473,7 +471,7 @@ async def to_code(config):
# From sdk-nrf 2.8.0 newlib time() gets the clock through gettimeofday(),
# which Zephyr only provides with XSI_SINGLE_PROCESS. Without it time()
# always returns -1.
if CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION] >= cv.Version(2, 8, 0):
if CORE.framework_version >= cv.Version(2, 8, 0):
zephyr_add_prj_conf("POSIX_SINGLE_PROCESS", True)
zephyr_add_prj_conf("XSI_SINGLE_PROCESS", True)
cg.add_define("USE_TIME")
+96 -1
View File
@@ -3,7 +3,7 @@ from dataclasses import dataclass, field
from logging import getLogger
import math
import re
from typing import Any
from typing import TYPE_CHECKING, Any
from esphome import automation, pins
import esphome.codegen as cg
@@ -42,8 +42,12 @@ from esphome.const import (
CONF_FLOW_CONTROL_PIN,
CONF_ID,
CONF_LAMBDA,
CONF_MODE,
CONF_NUMBER,
CONF_OPEN_DRAIN,
CONF_PORT,
CONF_PULLDOWN,
CONF_PULLUP,
CONF_RX_BUFFER_SIZE,
CONF_RX_PIN,
CONF_SEQUENCE,
@@ -60,6 +64,9 @@ import esphome.final_validate as fv
from esphome.types import ConfigType
from esphome.yaml_util import make_data_base
if TYPE_CHECKING:
from esphome.components.libretiny import HardwareUart
_LOGGER = getLogger(__name__)
CODEOWNERS = ["@esphome/core"]
@@ -333,6 +340,89 @@ CONFIG_SCHEMA = cv.All(
)
def _libretiny_hardware_uart(config: ConfigType) -> "HardwareUart | None":
"""Hardware UART the board can route the configured pins to; None if none can or the board is unknown."""
from esphome.components.libretiny import get_hardware_uarts, has_software_serial
# Pin flags make setup() use SoftwareSerial where the family has it
if has_software_serial() and any(
pin[CONF_MODE].get(flag)
for pin in (config.get(CONF_TX_PIN), config.get(CONF_RX_PIN))
if pin is not None
for flag in (CONF_OPEN_DRAIN, CONF_PULLUP, CONF_PULLDOWN)
):
return None
tx = config[CONF_TX_PIN][CONF_NUMBER] if CONF_TX_PIN in config else None
rx = config[CONF_RX_PIN][CONF_NUMBER] if CONF_RX_PIN in config else None
return next(
(
uart
for uart in get_hardware_uarts()
if tx in (None, *uart.tx_pins) and rx in (None, *uart.rx_pins)
),
None,
)
def _final_validate(config: ConfigType) -> None:
if CORE.is_libretiny:
_validate_libretiny_pins(config)
def _validate_libretiny_pins(config: ConfigType) -> None:
from esphome.components.libretiny import (
can_choose_uart_pins,
get_hardware_uarts,
get_libretiny_board,
has_software_serial,
)
# A board without pin data is matched against its default pins at boot
if not (uarts := get_hardware_uarts()):
return
board = get_libretiny_board()
uart = _libretiny_hardware_uart(config)
if uart is None:
if has_software_serial():
return
choices = "; ".join(
f"UART{u.port}: TX={'/'.join(map(str, u.tx_pins)) or 'none'}, "
f"RX={'/'.join(map(str, u.rx_pins)) or 'none'}"
for u in uarts
)
raise cv.Invalid(
f"Board {board} has no hardware UART on these pins. Pin numbers per UART: {choices}"
)
# Two entries on one port would share the Serial object, and the second begin() would move its pins
for other in fv.full_config.get().get(DOMAIN, []):
if other is config or other[CONF_ID] == config[CONF_ID]:
continue
if (
other_uart := _libretiny_hardware_uart(other)
) and other_uart.port == uart.port:
raise cv.Invalid(
f"UART {other[CONF_ID]} already uses hardware UART{uart.port} of board {board}"
)
if not uart.pin_choices:
return
# A left-out direction with no default pin is opened on an invalid pin, which hangs at boot
for key, role, choices in (
(CONF_TX_PIN, "TX", uart.tx_pin_choices),
(CONF_RX_PIN, "RX", uart.rx_pin_choices),
):
if choices and key not in config:
raise cv.Invalid(
f"UART{uart.port} of board {board} has no default {role} pin, so it needs {key}"
)
if not can_choose_uart_pins():
raise cv.Invalid(
f"Choosing the pins of UART{uart.port} on board {board} needs LibreTiny 1.12.0 or later"
)
FINAL_VALIDATE_SCHEMA = _final_validate
async def debug_to_code(config, parent):
trigger = cg.new_Pvariable(config[CONF_TRIGGER_ID], parent)
await cg.register_component(trigger, config)
@@ -426,6 +516,11 @@ async def to_code(config):
enable_serial1()
cg.add_define("USE_ESP8266_UART_SERIAL1")
if CORE.is_libretiny and (uart := _libretiny_hardware_uart(config)) is not None:
cg.add(var.set_hardware_port(uart.port))
if uart.pin_choices:
cg.add_define("USE_UART_LIBRETINY_PIN_ROUTING")
CORE.add_job(final_step)
@@ -25,6 +25,42 @@ static const char *const UART_TYPE[] = {
"software",
};
// Port whose default pins match, for a board codegen has no pin data for; PIN_INVALID means not configured.
static int8_t default_port(pin_size_t tx, pin_size_t rx) {
#if LT_HW_UART0
if ((tx == PIN_INVALID || tx == PIN_SERIAL0_TX) && (rx == PIN_INVALID || rx == PIN_SERIAL0_RX))
return 0;
#endif
#if LT_HW_UART1
if ((tx == PIN_INVALID || tx == PIN_SERIAL1_TX) && (rx == PIN_INVALID || rx == PIN_SERIAL1_RX))
return 1;
#endif
#if LT_HW_UART2
if ((tx == PIN_INVALID || tx == PIN_SERIAL2_TX) && (rx == PIN_INVALID || rx == PIN_SERIAL2_RX))
return 2;
#endif
return -1;
}
static SerialClass *hardware_serial(int8_t port) {
switch (port) {
#if LT_HW_UART0
case 0:
return &Serial0;
#endif
#if LT_HW_UART1
case 1:
return &Serial1;
#endif
#if LT_HW_UART2
case 2:
return &Serial2;
#endif
default:
return nullptr;
}
}
uint16_t LibreTinyUARTComponent::get_config() {
uint16_t config = 0;
@@ -49,8 +85,8 @@ uint16_t LibreTinyUARTComponent::get_config() {
}
void LibreTinyUARTComponent::setup() {
int16_t tx_pin = tx_pin_ == nullptr ? -1 : tx_pin_->get_pin();
int16_t rx_pin = rx_pin_ == nullptr ? -1 : rx_pin_->get_pin();
const pin_size_t tx_pin = this->tx_pin_ == nullptr ? PIN_INVALID : this->tx_pin_->get_pin();
const pin_size_t rx_pin = this->rx_pin_ == nullptr ? PIN_INVALID : this->rx_pin_->get_pin();
auto should_fallback_to_software_serial = [&]() -> bool {
auto has_flags = [](InternalGPIOPin *pin, const gpio::Flags mask) -> bool {
@@ -70,61 +106,49 @@ void LibreTinyUARTComponent::setup() {
return false;
};
if (false) { // NOLINT(readability-simplify-boolean-expr)
return;
}
#if LT_HW_UART0
else if ((tx_pin == -1 || tx_pin == PIN_SERIAL0_TX) && (rx_pin == -1 || rx_pin == PIN_SERIAL0_RX) &&
!should_fallback_to_software_serial()) {
this->serial_ = &Serial0;
this->hardware_idx_ = 0;
}
#endif
#if LT_HW_UART1
else if ((tx_pin == -1 || tx_pin == PIN_SERIAL1_TX) && (rx_pin == -1 || rx_pin == PIN_SERIAL1_RX) &&
!should_fallback_to_software_serial()) {
this->serial_ = &Serial1;
this->hardware_idx_ = 1;
}
#endif
#if LT_HW_UART2
else if ((tx_pin == -1 || tx_pin == PIN_SERIAL2_TX) && (rx_pin == -1 || rx_pin == PIN_SERIAL2_RX) &&
!should_fallback_to_software_serial()) {
this->serial_ = &Serial2;
this->hardware_idx_ = 2;
}
#endif
else {
#if LT_ARD_HAS_SOFTSERIAL
if (this->rx_pin_) {
this->rx_pin_->setup();
}
if (this->tx_pin_ && this->rx_pin_ != this->tx_pin_) {
this->tx_pin_->setup();
}
bool tx_inverted = tx_pin_ != nullptr && tx_pin_->is_inverted();
bool rx_inverted = rx_pin_ != nullptr && rx_pin_->is_inverted();
this->serial_ = new SoftwareSerial(rx_pin, tx_pin, rx_inverted || tx_inverted);
#else
this->serial_ = &Serial;
ESP_LOGE(TAG, " SoftwareSerial is not implemented for this chip. Only hardware pins are supported:");
#if LT_HW_UART0
ESP_LOGE(TAG, " TX=%u, RX=%u", PIN_SERIAL0_TX, PIN_SERIAL0_RX);
#endif
#if LT_HW_UART1
ESP_LOGE(TAG, " TX=%u, RX=%u", PIN_SERIAL1_TX, PIN_SERIAL1_RX);
#endif
#if LT_HW_UART2
ESP_LOGE(TAG, " TX=%u, RX=%u", PIN_SERIAL2_TX, PIN_SERIAL2_RX);
#endif
this->mark_failed(LOG_STR("SoftwareSerial is not implemented for this chip."));
return;
#endif
}
if (this->hardware_idx_ >= 0)
// Codegen picks the port from the board's pin lists; a board it has no pin data for matches the defaults here.
if (this->hardware_idx_ < 0)
this->hardware_idx_ = default_port(tx_pin, rx_pin);
SerialClass *hardware = should_fallback_to_software_serial() ? nullptr : hardware_serial(this->hardware_idx_);
if (hardware != nullptr) {
this->serial_ = hardware;
libretiny::ensure_serial_handle(this->hardware_idx_);
this->serial_->begin(this->baud_rate_, get_config());
#ifdef USE_UART_LIBRETINY_PIN_ROUTING
// Routes a port with pin choices to the configured pins (LibreTiny 1.12+, checked in codegen). setPins()
// replaces a left-out pin (PIN_INVALID) with the port's default, so default-pin ports start as before.
hardware->begin(this->baud_rate_, this->get_config(), rx_pin, tx_pin);
#else
hardware->begin(this->baud_rate_, this->get_config());
#endif
return;
}
this->hardware_idx_ = -1;
#if LT_ARD_HAS_SOFTSERIAL
if (this->rx_pin_) {
this->rx_pin_->setup();
}
if (this->tx_pin_ && this->rx_pin_ != this->tx_pin_) {
this->tx_pin_->setup();
}
bool tx_inverted = tx_pin_ != nullptr && tx_pin_->is_inverted();
bool rx_inverted = rx_pin_ != nullptr && rx_pin_->is_inverted();
this->serial_ = new SoftwareSerial(rx_pin, tx_pin, rx_inverted || tx_inverted);
this->serial_->begin(this->baud_rate_, this->get_config());
#else
this->serial_ = &Serial;
ESP_LOGE(TAG, " SoftwareSerial is not implemented for this chip. Only hardware pins are supported:");
#if LT_HW_UART0
ESP_LOGE(TAG, " TX=%u, RX=%u", PIN_SERIAL0_TX, PIN_SERIAL0_RX);
#endif
#if LT_HW_UART1
ESP_LOGE(TAG, " TX=%u, RX=%u", PIN_SERIAL1_TX, PIN_SERIAL1_RX);
#endif
#if LT_HW_UART2
ESP_LOGE(TAG, " TX=%u, RX=%u", PIN_SERIAL2_TX, PIN_SERIAL2_RX);
#endif
this->mark_failed(LOG_STR("SoftwareSerial is not implemented for this chip."));
#endif
}
void LibreTinyUARTComponent::dump_config() {
@@ -25,6 +25,8 @@ class LibreTinyUARTComponent final : public UARTComponent, public Component {
UARTFlushResult flush() override;
uint16_t get_config();
/// Hardware port codegen picked from the board's pin lists.
void set_hardware_port(int8_t port) { this->hardware_idx_ = port; }
HardwareSerial *get_hw_serial() { return this->serial_; }
int8_t get_hw_serial_number() { return this->hardware_idx_; }
@@ -15,6 +15,9 @@ namespace esphome::uart {
ESPHOME_LOG_TAG(TAG, "uart");
// GPIO32-47 (RP2350B) and GPIO64 (CYW43) are in no mask; a 32-bit shift by them is undefined.
static constexpr bool pin_in_mask(uint8_t pin, uint32_t mask) { return pin < 32 && (mask & (1U << pin)) != 0; }
uint16_t RP2UartComponent::get_config() {
uint16_t config = 0;
@@ -81,9 +84,9 @@ void RP2UartComponent::setup() {
if (this->tx_pin_->is_inverted()) {
ESP_LOGD(TAG, "An inverted TX pin %u can only be used with SerialPIO", this->tx_pin_->get_pin());
} else {
if (((1 << this->tx_pin_->get_pin()) & valid_tx_uart_0) != 0) {
if (pin_in_mask(this->tx_pin_->get_pin(), valid_tx_uart_0)) {
tx_hw = 0;
} else if (((1 << this->tx_pin_->get_pin()) & valid_tx_uart_1) != 0) {
} else if (pin_in_mask(this->tx_pin_->get_pin(), valid_tx_uart_1)) {
tx_hw = 1;
} else {
ESP_LOGD(TAG, "TX pin %u can only be used with SerialPIO", this->tx_pin_->get_pin());
@@ -95,9 +98,9 @@ void RP2UartComponent::setup() {
if (this->rx_pin_->is_inverted()) {
ESP_LOGD(TAG, "An inverted RX pin %u can only be used with SerialPIO", this->rx_pin_->get_pin());
} else {
if (((1 << this->rx_pin_->get_pin()) & valid_rx_uart_0) != 0) {
if (pin_in_mask(this->rx_pin_->get_pin(), valid_rx_uart_0)) {
rx_hw = 0;
} else if (((1 << this->rx_pin_->get_pin()) & valid_rx_uart_1) != 0) {
} else if (pin_in_mask(this->rx_pin_->get_pin(), valid_rx_uart_1)) {
rx_hw = 1;
} else {
ESP_LOGD(TAG, "RX pin %u can only be used with SerialPIO", this->rx_pin_->get_pin());
+88
View File
@@ -0,0 +1,88 @@
from esphome import pins
import esphome.codegen as cg
from esphome.components import i2c
from esphome.components.i2c import CONF_I2C_ID
import esphome.config_validation as cv
from esphome.const import CONF_ADDRESS, CONF_ENABLE_PIN
import esphome.final_validate as fv
from esphome.types import ConfigType
AUTO_LOAD = ["sensor"]
CODEOWNERS = ["@NonaSuomy"]
DEPENDENCIES = ["i2c"]
DOMAIN = "vl6180x"
MULTI_CONF = True
CONF_VL6180X_ID = "vl6180x_id"
vl6180x_ns = cg.esphome_ns.namespace("vl6180x")
VL6180XComponent = vl6180x_ns.class_(
"VL6180XComponent", cg.PollingComponent, i2c.I2CDevice
)
_request_enable_pin_slot = cg.slot_counter("VL6180X_ENABLE_PIN_COUNT")
DEFAULT_ADDRESS = 0x29
def _validate_address(config: ConfigType) -> ConfigType:
# The sensor always boots at 0x29; only an enable pin lets it move elsewhere
if config[CONF_ADDRESS] != DEFAULT_ADDRESS and CONF_ENABLE_PIN not in config:
raise cv.Invalid(
f"An address other than 0x{DEFAULT_ADDRESS:02X} needs an enable_pin"
)
return config
CONFIG_SCHEMA = cv.All(
cv.Schema(
{
cv.GenerateID(): cv.declare_id(VL6180XComponent),
cv.Optional(CONF_ENABLE_PIN): pins.gpio_output_pin_schema,
}
)
.extend(cv.polling_component_schema("60s"))
.extend(i2c.i2c_device_schema(DEFAULT_ADDRESS)),
_validate_address,
)
def _final_validate(config: ConfigType) -> ConfigType:
# With several sensors on one bus each needs its own enable_pin so it can be held in reset
# while the others are re-addressed, and none may stay at 0x29, or a later sibling boots at
# the same address and the re-address write reaches both chips.
addresses = [
conf[CONF_ADDRESS]
for conf in fv.full_config.get()[DOMAIN]
if conf[CONF_I2C_ID] == config[CONF_I2C_ID]
]
if len(addresses) < 2:
return config
if CONF_ENABLE_PIN not in config:
raise cv.Invalid(
"Every VL6180X on a shared I2C bus needs an enable_pin",
path=[CONF_ENABLE_PIN],
)
address = config[CONF_ADDRESS]
if address == DEFAULT_ADDRESS:
raise cv.Invalid(
f"VL6180X sensors sharing an I2C bus must all be re-addressed away "
f"from 0x{DEFAULT_ADDRESS:02X}",
path=[CONF_ADDRESS],
)
if addresses.count(address) > 1:
raise cv.Invalid(
f"Address 0x{address:02X} is used by more than one VL6180X on this bus",
path=[CONF_ADDRESS],
)
return config
FINAL_VALIDATE_SCHEMA = _final_validate
async def to_code(config: ConfigType) -> None:
var = await i2c.new_i2c_component(config)
if pin := await cg.add_pin(var.set_enable_pin, config.get(CONF_ENABLE_PIN)):
_request_enable_pin_slot()
cg.add(var.register_enable_pin(pin))
+80
View File
@@ -0,0 +1,80 @@
import esphome.codegen as cg
from esphome.components import sensor
import esphome.config_validation as cv
from esphome.const import (
CONF_DISTANCE,
CONF_GAIN,
CONF_ILLUMINANCE,
CONF_INTEGRATION_TIME,
DEVICE_CLASS_DISTANCE,
DEVICE_CLASS_ILLUMINANCE,
STATE_CLASS_MEASUREMENT,
UNIT_LUX,
UNIT_MILLIMETER,
)
import esphome.final_validate as fv
from esphome.types import ConfigType
from . import CONF_VL6180X_ID, DOMAIN, VL6180XComponent
DEPENDENCIES = ["vl6180x"]
CONF_SCALER = "scaler"
# Gain factor to the SYSALS_ANALOGUE_GAIN code
ALS_GAINS = {1: 6, 1.25: 5, 1.67: 4, 2.5: 3, 5: 2, 10: 1, 20: 0, 40: 7}
CONFIG_SCHEMA = cv.All(
cv.Schema(
{
cv.GenerateID(CONF_VL6180X_ID): cv.use_id(VL6180XComponent),
cv.Optional(CONF_DISTANCE): sensor.sensor_schema(
unit_of_measurement=UNIT_MILLIMETER,
accuracy_decimals=0,
device_class=DEVICE_CLASS_DISTANCE,
state_class=STATE_CLASS_MEASUREMENT,
).extend(
{cv.Optional(CONF_SCALER, default=1): cv.one_of(1, 2, 3, int=True)}
),
cv.Optional(CONF_ILLUMINANCE): sensor.sensor_schema(
unit_of_measurement=UNIT_LUX,
accuracy_decimals=1,
device_class=DEVICE_CLASS_ILLUMINANCE,
state_class=STATE_CLASS_MEASUREMENT,
).extend(
{
cv.Optional(CONF_GAIN, default=1): cv.enum(ALS_GAINS),
cv.Optional(CONF_INTEGRATION_TIME, default="100ms"): cv.All(
cv.positive_time_period_milliseconds,
cv.Range(
min=cv.TimePeriod(milliseconds=1),
max=cv.TimePeriod(milliseconds=512),
),
),
}
),
}
),
cv.has_at_least_one_key(CONF_DISTANCE, CONF_ILLUMINANCE),
)
FINAL_VALIDATE_SCHEMA = fv.unique_platform_key(
domain=sensor.DOMAIN,
platform=DOMAIN,
keys=(CONF_VL6180X_ID,),
message="Only one VL6180X sensor platform entry is allowed per hub",
)
async def to_code(config: ConfigType) -> None:
hub = await cg.get_variable(config[CONF_VL6180X_ID])
sensors = sensor.sub_sensors(config)
if (distance_config := config.get(CONF_DISTANCE)) is not None:
await sensors(CONF_DISTANCE, hub.set_distance_sensor)
cg.add(hub.set_scaler(distance_config[CONF_SCALER]))
if (illuminance_config := config.get(CONF_ILLUMINANCE)) is not None:
await sensors(CONF_ILLUMINANCE, hub.set_illuminance_sensor)
gain = illuminance_config[CONF_GAIN]
time_ms = illuminance_config[CONF_INTEGRATION_TIME].total_milliseconds
# The datasheet scale is 0.32 lux per count at 1x gain and 100 ms
cg.add(hub.set_als(gain.enum_value, time_ms, 32.0 / (float(gain) * time_ms)))
+267
View File
@@ -0,0 +1,267 @@
#include "vl6180x.h"
#include "esphome/core/hal.h"
#include "esphome/core/log.h"
namespace esphome::vl6180x {
ESPHOME_LOG_TAG(TAG, "vl6180x");
static constexpr uint32_t MEASUREMENT_ID = 0;
static constexpr uint8_t DEFAULT_ADDRESS = 0x29;
static constexpr uint8_t MODEL_ID = 0xB4;
static constexpr uint16_t REG_IDENTIFICATION_MODEL_ID = 0x000;
static constexpr uint16_t REG_SYSTEM_INTERRUPT_CLEAR = 0x015;
static constexpr uint16_t REG_SYSTEM_FRESH_OUT_OF_RESET = 0x016;
static constexpr uint16_t REG_SYSRANGE_START = 0x018;
static constexpr uint16_t REG_SYSRANGE_CROSSTALK_VALID_HEIGHT = 0x021;
static constexpr uint16_t REG_SYSRANGE_PART_TO_PART_OFFSET = 0x024;
static constexpr uint16_t REG_SYSRANGE_RANGE_CHECK_ENABLES = 0x02D;
static constexpr uint16_t REG_SYSALS_START = 0x038;
static constexpr uint16_t REG_SYSALS_ANALOGUE_GAIN = 0x03F;
static constexpr uint16_t REG_SYSALS_INTEGRATION_PERIOD = 0x040;
static constexpr uint16_t REG_RESULT_RANGE_STATUS = 0x04D;
static constexpr uint16_t REG_RESULT_ALS_STATUS = 0x04E;
static constexpr uint16_t REG_RESULT_RANGE_VAL = 0x062;
static constexpr uint16_t REG_RANGE_SCALING = 0x096;
static constexpr uint16_t REG_I2C_DEVICE_ADDRESS = 0x212;
// RESULT_INTERRUPT_STATUS_GPIO: a new range sample in bits 2:0, a new ALS sample in bits 5:3
static constexpr uint8_t RANGE_SAMPLE_READY = 0x04;
static constexpr uint8_t ALS_SAMPLE_READY = 0x04 << 3;
// Range conversion is at most the 50 ms convergence time set below plus readout
static constexpr uint32_t RANGE_TIME_MS = 70;
static constexpr uint32_t ALS_READOUT_MARGIN_MS = 400;
// Indexed by the range scaler, 1x to 3x (AN4545)
static constexpr uint16_t RANGE_SCALING_VALUES[] PROGMEM = {0, 253, 127, 84};
struct RegValue {
uint16_t reg;
uint8_t value;
};
// Private settings written once after a power-on reset (AN4545 table 7)
static constexpr RegValue MANDATORY_SETTINGS[] PROGMEM = {
{0x0207, 0x01},
{0x0208, 0x01},
{0x0096, 0x00},
{0x0097, 0xFD},
{0x00E3, 0x00},
{0x00E4, 0x04},
{0x00E5, 0x02},
{0x00E6, 0x01},
{0x00E7, 0x03},
{0x00F5, 0x02},
{0x00D9, 0x05},
{0x00DB, 0xCE},
{0x00DC, 0x03},
{0x00DD, 0xF8},
{0x009F, 0x00},
{0x00A3, 0x3C},
{0x00B7, 0x00},
{0x00BB, 0x3C},
{0x00B2, 0x09},
{0x00CA, 0x09},
{0x0198, 0x01},
{0x01B0, 0x17},
{0x01AD, 0x00},
{0x00FF, 0x05},
{0x0100, 0x05},
{0x0199, 0x05},
{0x01A6, 0x1B},
{0x01AC, 0x3E},
{0x01A7, 0x1F},
{0x0030, 0x00},
{REG_SYSTEM_FRESH_OUT_OF_RESET, 0x00},
};
// Recommended settings (AN4545 section 9), with GPIO1 left floating and new-sample interrupts flagged
static constexpr RegValue DEFAULT_SETTINGS[] PROGMEM = {
{0x010A, 0x30}, // averaging sample period
{0x0031, 0xFF}, // repeat temperature calibration every 255 range measurements
{0x002E, 0x01}, // run the first temperature calibration now
{0x001C, 0x32}, // 50 ms maximum convergence time
{0x0011, 0x20}, // GPIO1 off
{0x0014, RANGE_SAMPLE_READY | ALS_SAMPLE_READY},
{REG_SYSTEM_INTERRUPT_CLEAR, 0x07},
};
template<size_t N> static bool write_settings(i2c::I2CDevice *device, const RegValue (&table)[N]) {
for (const auto &entry : table) {
RegValue setting;
progmem_memcpy(&setting, &entry, sizeof(setting));
if (!device->write_byte_reg16(setting.reg, setting.value))
return false;
}
return true;
}
#ifdef VL6180X_ENABLE_PIN_COUNT
SlotList<GPIOPin *, VL6180X_ENABLE_PIN_COUNT> VL6180XComponent::enable_pins; // NOLINT
#endif
void VL6180XComponent::setup() {
#ifdef VL6180X_ENABLE_PIN_COUNT
// Every sensor boots at 0x29, so all are held in reset and then released one at a time
for (auto *pin : enable_pins) {
pin->setup();
pin->digital_write(false);
}
enable_pins.clear();
if (this->enable_pin_ != nullptr) {
this->enable_pin_->digital_write(true);
delay(10);
}
#endif
const uint8_t address = this->address_;
this->set_i2c_address(DEFAULT_ADDRESS);
uint8_t model_id = 0;
const bool read_ok = this->read_byte_reg16(REG_IDENTIFICATION_MODEL_ID, &model_id);
const bool ok = read_ok && model_id == MODEL_ID && this->init_() &&
(address == DEFAULT_ADDRESS || this->write_byte_reg16(REG_I2C_DEVICE_ADDRESS, address));
this->set_i2c_address(address);
if (ok)
return;
#ifdef VL6180X_ENABLE_PIN_COUNT
// A sensor left at 0x29 would answer for the next one released
if (this->enable_pin_ != nullptr)
this->enable_pin_->digital_write(false);
#endif
if (read_ok && model_id != MODEL_ID) {
ESP_LOGE(TAG, "Wrong model ID 0x%02X", model_id);
this->mark_failed(LOG_STR("Wrong model ID"));
return;
}
this->mark_failed(LOG_STR(ESP_LOG_MSG_COMM_FAIL));
}
bool VL6180XComponent::init_() {
uint8_t fresh;
uint8_t offset;
if (!this->read_byte_reg16(REG_SYSTEM_FRESH_OUT_OF_RESET, &fresh) ||
!this->read_byte_reg16(REG_SYSRANGE_PART_TO_PART_OFFSET, &offset))
return false;
// The factory offset is for 1x; a sensor that kept power through an MCU reboot already holds it divided by the
// scaler from the last setup
int16_t part_offset = static_cast<int8_t>(offset);
if (fresh & 0x01) {
if (!write_settings(this, MANDATORY_SETTINGS))
return false;
} else {
uint8_t scaling[2];
if (this->read_register16(REG_RANGE_SCALING, scaling, 2) != i2c::ERROR_OK)
return false;
const uint16_t value = encode_uint16(scaling[0], scaling[1]);
for (uint8_t scaler = 2; scaler <= 3; scaler++) {
if (value == progmem_read_uint16(&RANGE_SCALING_VALUES[scaler]))
part_offset *= scaler;
}
}
uint8_t period[2];
put_be16(period, this->als_integration_time_ms_ - 1);
uint8_t scaling[2];
put_be16(scaling, progmem_read_uint16(&RANGE_SCALING_VALUES[this->scaler_]));
return write_settings(this, DEFAULT_SETTINGS) &&
this->write_byte_reg16(REG_SYSALS_ANALOGUE_GAIN, 0x40 | this->als_gain_code_) &&
this->write_register16(REG_SYSALS_INTEGRATION_PERIOD, period, 2) == i2c::ERROR_OK &&
this->write_register16(REG_RANGE_SCALING, scaling, 2) == i2c::ERROR_OK &&
this->write_byte_reg16(REG_SYSRANGE_PART_TO_PART_OFFSET, static_cast<uint8_t>(part_offset / this->scaler_)) &&
this->write_byte_reg16(REG_SYSRANGE_CROSSTALK_VALID_HEIGHT, 20 / this->scaler_) &&
// SNR check, plus the early convergence estimate only at 1x, as in ST's API
this->write_byte_reg16(REG_SYSRANGE_RANGE_CHECK_ENABLES, 0x10 | (this->scaler_ == 1 ? 0x01 : 0x00));
}
void VL6180XComponent::update() {
// A measurement still running means the update interval is shorter than one cycle
if (this->measuring_)
return;
this->measuring_ = true;
if (this->distance_sensor_ != nullptr) {
this->start_range_();
} else {
this->start_als_();
}
}
void VL6180XComponent::start_range_() {
if (!this->status_comm_check(this->write_byte_reg16(REG_SYSRANGE_START, 0x01))) {
this->measuring_ = false;
return;
}
this->set_timeout(MEASUREMENT_ID, RANGE_TIME_MS, [this]() { this->read_range_(); });
}
void VL6180XComponent::read_range_() {
uint8_t status[3]; // range status, ALS status, interrupt status
uint8_t raw;
if (!this->status_comm_check(this->read_register16(REG_RESULT_RANGE_STATUS, status, 3) == i2c::ERROR_OK) ||
!this->status_comm_check((status[2] & 0x07) == RANGE_SAMPLE_READY) ||
!this->status_comm_check(this->read_byte_reg16(REG_RESULT_RANGE_VAL, &raw) &&
this->write_byte_reg16(REG_SYSTEM_INTERRUPT_CLEAR, 0x07))) {
this->measuring_ = false;
return;
}
const uint8_t error = status[0] >> 4;
// Codes 1 to 5 are self-test faults (VCSEL or PLL); a fault keeps the warning until a whole cycle works
if (error >= 1 && error <= 5) {
ESP_LOGW(TAG, "Range self-test fault %u", error);
PUBLISH_STATE(this->distance_sensor_, NAN);
this->status_set_warning();
this->measuring_ = false;
return;
}
// Other codes mean no target or out of range
if (error != 0) {
ESP_LOGV(TAG, "Range error code %u", error);
PUBLISH_STATE(this->distance_sensor_, NAN);
} else {
PUBLISH_STATE(this->distance_sensor_, static_cast<float>(raw * this->scaler_));
}
// With illuminance configured, read_als_() clears the warning once the whole cycle has worked
if (this->illuminance_sensor_ != nullptr) {
this->start_als_();
} else {
this->measuring_ = false;
this->status_clear_warning();
}
}
void VL6180XComponent::start_als_() {
if (!this->status_comm_check(this->write_byte_reg16(REG_SYSALS_START, 0x01))) {
this->measuring_ = false;
return;
}
this->set_timeout(MEASUREMENT_ID, this->als_integration_time_ms_ + ALS_READOUT_MARGIN_MS,
[this]() { this->read_als_(); });
}
void VL6180XComponent::read_als_() {
this->measuring_ = false;
uint8_t result[4]; // ALS status, interrupt status, ALS value
if (!this->status_comm_check(this->read_register16(REG_RESULT_ALS_STATUS, result, 4) == i2c::ERROR_OK) ||
!this->status_comm_check((result[1] & 0x38) == ALS_SAMPLE_READY) ||
!this->status_comm_result(this->write_byte_reg16(REG_SYSTEM_INTERRUPT_CLEAR, 0x07)))
return;
// An overflow in bright light is a reading, not a fault
if (result[0] >> 4) {
ESP_LOGV(TAG, "ALS error code %u", result[0] >> 4);
PUBLISH_STATE(this->illuminance_sensor_, NAN);
return;
}
PUBLISH_STATE(this->illuminance_sensor_, encode_uint16(result[2], result[3]) * this->lux_per_count_);
}
void VL6180XComponent::dump_config() {
ESP_LOGCONFIG(TAG, "VL6180X:");
LOG_I2C_DEVICE(this);
LOG_PIN(" Enable Pin: ", this->enable_pin_);
LOG_UPDATE_INTERVAL(this);
LOG_SENSOR(" ", "Distance", this->distance_sensor_);
LOG_SENSOR(" ", "Illuminance", this->illuminance_sensor_);
}
} // namespace esphome::vl6180x
+55
View File
@@ -0,0 +1,55 @@
#pragma once
#include "esphome/components/i2c/i2c.h"
#include "esphome/components/sensor/sensor.h"
#include "esphome/core/component.h"
#include "esphome/core/gpio.h"
#include "esphome/core/helpers.h"
namespace esphome::vl6180x {
class VL6180XComponent final : public PollingComponent, public i2c::I2CDevice {
SUB_SENSOR(distance)
SUB_SENSOR(illuminance)
public:
void setup() override;
void update() override;
void dump_config() override;
void set_enable_pin(GPIOPin *pin) { this->enable_pin_ = pin; }
void set_scaler(uint8_t scaler) { this->scaler_ = scaler; }
/// @param gain_code SYSALS_ANALOGUE_GAIN code of the gain
/// @param integration_time_ms 1 to 512 ms
/// @param lux_per_count lux of one ALS count at this gain and integration time
void set_als(uint8_t gain_code, uint16_t integration_time_ms, float lux_per_count) {
this->als_gain_code_ = gain_code;
this->als_integration_time_ms_ = integration_time_ms;
this->lux_per_count_ = lux_per_count;
}
#ifdef VL6180X_ENABLE_PIN_COUNT
/// The first setup() holds every registered sensor in reset, so each can be moved off 0x29 alone.
static void register_enable_pin(GPIOPin *pin) { enable_pins.push_back(pin); }
#endif
protected:
bool init_();
void start_range_();
void read_range_();
void start_als_();
void read_als_();
#ifdef VL6180X_ENABLE_PIN_COUNT
static SlotList<GPIOPin *, VL6180X_ENABLE_PIN_COUNT> enable_pins; // NOLINT
#endif
GPIOPin *enable_pin_{nullptr};
float lux_per_count_{0.0f};
uint16_t als_integration_time_ms_{100};
uint8_t als_gain_code_{6};
uint8_t scaler_{1};
bool measuring_{false};
};
} // namespace esphome::vl6180x
+13 -6
View File
@@ -1,11 +1,11 @@
from collections.abc import Callable
from pathlib import Path
import textwrap
from typing import NamedTuple, TypedDict
from typing import Literal, NamedTuple, TypedDict
import esphome.codegen as cg
import esphome.config_validation as cv
from esphome.const import CONF_BOARD, KEY_CORE, KEY_FRAMEWORK_VERSION
from esphome.const import CONF_BOARD
from esphome.core import CORE, CoroPriority, coroutine_with_priority
from esphome.helpers import copy_file_if_changed, write_file_if_changed
from esphome.types import ConfigType
@@ -212,10 +212,18 @@ async def _cdc_acm_to_code() -> None:
_cdc_acm_add_ports()
def zephyr_setup_preferences() -> None:
PreferenceStorage = Literal["NVS", "ZMS"]
def zephyr_setup_preferences(storage: PreferenceStorage = "NVS") -> None:
"""Store preferences through the settings subsystem.
`storage` picks the Zephyr storage backend: NVS for flash, ZMS for RRAM and MRAM.
"""
cg.add(zephyr_ns.setup_preferences())
zephyr_add_prj_conf("SETTINGS", True)
zephyr_add_prj_conf("NVS", True)
zephyr_add_prj_conf(storage, True)
zephyr_add_prj_conf(f"SETTINGS_{storage}", True)
zephyr_add_prj_conf("FLASH_MAP", True)
zephyr_add_prj_conf("FLASH", True)
@@ -273,8 +281,7 @@ def zephyr_use_usb_device_next() -> bool:
The new stack (device_next) is used from nRF Connect SDK 3.4.1, where the
legacy stack is deprecated. Older SDKs keep the legacy stack.
"""
framework_ver: cv.Version = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
return CORE.is_nrf52 and framework_ver >= cv.Version(3, 4, 1)
return CORE.is_nrf52 and CORE.framework_version >= cv.Version(3, 4, 1)
def _disable_board_cdc_acm_overlay() -> str:
@@ -17,7 +17,7 @@ from esphome.components.zephyr.const import (
KEY_PM_STATIC,
)
import esphome.config_validation as cv
from esphome.const import CONF_ID, KEY_CORE, KEY_FRAMEWORK_VERSION
from esphome.const import CONF_ID
from esphome.core import CORE, CoroPriority, coroutine_with_priority
from esphome.types import ConfigType
@@ -40,10 +40,6 @@ CONFIG_SCHEMA = cv.All(
)
def _framework_version() -> cv.Version:
return CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
def _partition_address() -> int:
"""Place the partition below the lowest section reserved above the SoftDevice
(the bootloader), or at the end of flash with MCUboot, on an erase page boundary."""
@@ -91,7 +87,7 @@ async def to_code(config: ConfigType) -> None:
cg.add_define("USE_CRASH_HANDLER")
zephyr_add_prj_conf("DEBUG_COREDUMP", True)
zephyr_add_prj_conf("DEBUG_COREDUMP_BACKEND_FLASH_PARTITION", True)
framework_ver = _framework_version()
framework_ver = CORE.framework_version
if framework_ver >= DUMP_THREADS_MIN_VERSION:
zephyr_add_prj_conf("DEBUG_COREDUMP_MEMORY_DUMP_THREADS", True)
else:
@@ -36,8 +36,6 @@ from esphome.const import (
CONF_NUMBER,
CONF_PIN,
CONF_STATUS,
KEY_CORE,
KEY_FRAMEWORK_VERSION,
Framework,
)
from esphome.core import CORE, coroutine_with_priority
@@ -133,8 +131,7 @@ def _validate_bootloader(config: ConfigType) -> None:
return
if bootloader not in MCUMGR_OTA_BOOTLOADERS:
raise cv.Invalid(f"{bootloader} does not support OTA")
framework_ver: cv.Version = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
if framework_ver < cv.Version(2, 9, 2):
if CORE.framework_version < cv.Version(2, 9, 2):
raise cv.Invalid(
"OTA with Adafruit_nRF52_Bootloader requires at least SDK 2.9.2"
)
@@ -252,8 +249,7 @@ async def to_code(config: ConfigType) -> None:
""",
image="mcuboot",
)
framework_ver = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
if framework_ver >= cv.Version(2, 9, 2):
if CORE.framework_version >= cv.Version(2, 9, 2):
zephyr_data()[KEY_SYSBUILD] = True
bootloader = zephyr_data()[KEY_BOOTLOADER]
+3 -7
View File
@@ -68,9 +68,6 @@ from esphome.const import (
ENTITY_CATEGORY_CONFIG,
ENTITY_CATEGORY_DIAGNOSTIC,
ENTITY_CATEGORY_NONE,
KEY_CORE,
KEY_FRAMEWORK_VERSION,
KEY_TARGET_FRAMEWORK,
PLATFORM_ESP32,
PLATFORM_ESP8266,
PLATFORM_NRF52,
@@ -2937,8 +2934,7 @@ def require_framework_version(
"""
def validator(value):
core_data = CORE.data[KEY_CORE]
framework = core_data[KEY_TARGET_FRAMEWORK]
framework = CORE.target_framework
keys_to_try: list[str] = []
if CORE.is_host and framework == "host":
@@ -2984,14 +2980,14 @@ def require_framework_version(
required = kwargs[key]
if max_version:
if core_data[KEY_FRAMEWORK_VERSION] > required:
if CORE.framework_version > required:
msg = f"This feature requires framework version {required} or lower"
if extra_message:
msg += f". {extra_message}"
raise Invalid(msg)
return value
if core_data[KEY_FRAMEWORK_VERSION] < required:
if CORE.framework_version < required:
msg = f"This feature requires at least framework version {required}"
if extra_message:
msg += f". {extra_message}"
+6
View File
@@ -20,6 +20,7 @@ from esphome.const import (
CONF_WEB_SERVER,
CONF_WIFI,
KEY_CORE,
KEY_FRAMEWORK_VERSION,
KEY_TARGET_FRAMEWORK,
KEY_TARGET_PLATFORM,
NATIVE_TOOLCHAINS,
@@ -1035,6 +1036,11 @@ class EsphomeCore:
def target_framework(self):
return self.data[KEY_CORE][KEY_TARGET_FRAMEWORK]
@property
def framework_version(self) -> Version:
"""The version of the target platform's framework, set by the platform component."""
return self.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
@property
def using_arduino(self):
return self.target_framework == "arduino"
+6 -25
View File
@@ -153,7 +153,6 @@
#define USE_LINE_READER
#define USE_LOCK
#define USE_LOGGER
#define USE_LOGGER_CONSOLE
#define USE_LOGGER_LEVEL_LISTENERS
#define USE_LOGGER_RUNTIME_TAG_LEVELS
#define USE_LVGL
@@ -242,6 +241,7 @@
#define REMOTE_BASE_DUMPER_COUNT 1
#define REMOTE_BASE_LISTENER_COUNT 1
#define SX1509_ON_KEY_COUNT 1
#define VL6180X_ENABLE_PIN_COUNT 2
#define WIEGAND_ON_KEY_COUNT 1
#define WIEGAND_ON_RAW_COUNT 1
#define WIEGAND_ON_TAG_COUNT 1
@@ -335,6 +335,7 @@
#define USE_PACKET_INTERFACE_HDLC
#define USE_PACKET_INTERFACE_XXTEA
#define USE_PCA9554_PCAL
#define USE_PCM1863_SELECT
#define USE_POWER_SUPPLY
// Only defined by key-lookup preference backends; the slot-based platforms
// (esp8266, rp2040) never set it in generated builds, and their preferences
@@ -768,26 +769,16 @@
#if defined(USE_ESP32_VARIANT_ESP32S2)
#define USE_LOGGER_USB_CDC
#define USE_LOGGER_UART_SELECTION_USB_CDC
#define ESPHOME_LOGGER_UART_NAME "USB_CDC"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_USB_CDC
#elif defined(USE_ESP32_VARIANT_ESP32H21)
#define USE_LOGGER_USB_SERIAL_JTAG
#define USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG
#define ESPHOME_LOGGER_UART_NAME "USB_SERIAL_JTAG"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_USB_SERIAL_JTAG
#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32C5) || \
defined(USE_ESP32_VARIANT_ESP32C6) || defined(USE_ESP32_VARIANT_ESP32C61) || defined(USE_ESP32_VARIANT_ESP32H2) || \
defined(USE_ESP32_VARIANT_ESP32H4) || defined(USE_ESP32_VARIANT_ESP32P4) || defined(USE_ESP32_VARIANT_ESP32S3) || \
defined(USE_ESP32_VARIANT_ESP32S31)
defined(USE_ESP32_VARIANT_ESP32H21) || defined(USE_ESP32_VARIANT_ESP32H4) || defined(USE_ESP32_VARIANT_ESP32P4) || \
defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32S31)
#define USE_LOGGER_USB_CDC
#define USE_LOGGER_UART_SELECTION_USB_CDC
#define USE_LOGGER_USB_SERIAL_JTAG
#define USE_LOGGER_UART_SELECTION_USB_SERIAL_JTAG
#define ESPHOME_LOGGER_UART_NAME "USB_SERIAL_JTAG"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_USB_SERIAL_JTAG
#else
#define USE_LOGGER_UART_SELECTION_UART0
#define ESPHOME_LOGGER_UART_NAME "UART0"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_UART0
#endif
#endif
@@ -801,9 +792,6 @@
#define USE_WIFI_SCAN_RESULTS_LOCK
#define USE_ESP8266_LOGGER_SERIAL
#define USE_ESP8266_LOGGER_SERIAL1
#define USE_LOGGER_UART_SELECTION_UART0
#define ESPHOME_LOGGER_UART_NAME "UART0"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_UART0
#define USE_ESP8266_PREFERENCES_FLASH
#define ESP8266_PREFERENCES_FLASH_WORDS 128
#define ESP8266_PREFERENCES_RTC_EBOOT_WORDS 32
@@ -849,8 +837,6 @@
#define USE_I2C
#define USE_LOGGER_USB_CDC
#define USE_LOGGER_UART_SELECTION_USB_CDC
#define ESPHOME_LOGGER_UART_NAME "USB_CDC"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_USB_CDC
#define USE_SOCKET_IMPL_LWIP_TCP
#define USE_RP2040_BLE
#define USE_RP2_BLE_TRACKER
@@ -881,9 +867,6 @@
#if defined(USE_BK72XX) || defined(USE_RTL87XX) || defined(USE_LN882X)
#define USE_LIBRETINY_CRASH_HANDLER
#endif
#define USE_LOGGER_UART_SELECTION_DEFAULT
#define ESPHOME_LOGGER_UART_NAME "DEFAULT"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_DEFAULT
#ifdef USE_BK72XX
#define USE_REMOTE_RECEIVER_TIMER_SAMPLING
#endif
@@ -901,6 +884,7 @@
#define USE_BK72XX_BLE_TRACKER
#endif
#define USE_LIBRETINY_RTC_PREFERENCES
#define USE_UART_LIBRETINY_PIN_ROUTING
#define LT_GPIO_RECOVER 1
#define ESPHOME_BLE_DEVICE_BASE_LISTENER_COUNT 1
#define ESPHOME_SUSPEND_LOOP
@@ -938,11 +922,8 @@
#define ESPHOME_TASK_LOG_BUFFER_SIZE 768
#define USE_LOGGER_EARLY_MESSAGE
#define USE_LOGGER_UART_SELECTION_USB_CDC
#define ESPHOME_LOGGER_UART_NAME "USB_CDC"
#define ESPHOME_LOGGER_UART_SELECTION logger::UART_SELECTION_USB_CDC
#define USE_LOGGER_USB_CDC
#define USE_LOGGER_WAIT_FOR_CDC
#define USE_LOGGER_ZEPHYR_CDC_LOOP
#define USE_NRF52_DFU
#define USE_NRF52_REG0_VOUT 5
#define USE_NRF52_UICR_ERASE
+3 -1
View File
@@ -846,7 +846,9 @@ def convert_visual_temperatures(
that needs ``full_config`` is left for final validation, which runs this again with it."""
if (unit := entity_temperature_unit(config, full_config)) is None:
return config
visual = config[CONF_VISUAL]
# A platform entry that only holds nested entities has no visual section of its own
if (visual := config.get(CONF_VISUAL)) is None:
return config
convert_temperature_keys(visual, (CONF_MIN_TEMPERATURE, CONF_MAX_TEMPERATURE), unit)
section = visual if delta_section is None else visual.get(delta_section)
if section is not None:
+1 -1
View File
@@ -214,7 +214,7 @@ class StorageJSON:
hardware = esp32.get_esp32_variant(esph)
framework_version = str(esp32.idf_version())
elif esph.is_nrf52:
framework_version = str(esph.data[KEY_CORE][KEY_FRAMEWORK_VERSION])
framework_version = str(esph.framework_version)
return StorageJSON(
storage_version=1,
name=esph.name,
+1 -1
View File
@@ -28,7 +28,7 @@ bleak==3.1.0
smpclient==7.4.0
# smp 4.2+ needs cbor2 6+, which ships no Intel macOS wheels (arm64 only).
smp==4.3.0; platform_system != "Darwin" or platform_machine != "x86_64"
smp==4.2.0; platform_system == "Darwin" and platform_machine == "x86_64"
smp==4.3.0; platform_system == "Darwin" and platform_machine == "x86_64"
requests==2.34.2
py7zr==1.1.4
platformdirs==4.14.5 # native esp-idf toolchain global cache dir
@@ -222,6 +222,20 @@ def test_a_resolved_unit_waits_for_the_full_config() -> None:
assert config[CONF_VISUAL][CONF_MIN_TEMPERATURE] == pytest.approx(59.0)
def test_final_validate_skips_a_platform_that_only_holds_nested_climates() -> None:
"""A hub platform may put each of its climates under a key of one platform entry."""
nested = climate_schema(climate_ns.class_("NestedClimate", Climate))
platform_schema = cv.Schema({cv.Optional("zone_1"): nested})
config = platform_schema(
{"zone_1": {CONF_NAME: "Zone 1", CONF_VISUAL: {CONF_MIN_TEMPERATURE: "50°F"}}}
)
# The platform entry itself is not a climate and has no visual section
assert CONF_VISUAL not in config
_final_validate([config])
# The nested climate was converted by its own schema
assert config["zone_1"][CONF_VISUAL][CONF_MIN_TEMPERATURE] == pytest.approx(10.0)
@pytest.mark.parametrize(
("use_fahrenheit", "cn105_lines"),
[
+44 -53
View File
@@ -68,6 +68,38 @@ def test_logger_pre_setup_before_other_components(generate_main):
)
def test_default_uart_selection_is_not_emitted(generate_main):
"""UART0 is the C++ initializer on ESP8266, so the setter is skipped."""
main_cpp = generate_main("tests/component_tests/logger/test_logger.yaml")
assert "set_uart_selection(" not in main_cpp
def test_custom_uart_selection_is_emitted(generate_main):
"""A non default UART still reaches the setter before pre_setup()."""
main_cpp = generate_main("tests/component_tests/logger/test_logger_uart1.yaml")
assert "set_uart_selection(logger::UART_SELECTION_UART1);" in main_cpp
def test_libretiny_default_uart_selection_is_not_emitted(generate_main):
"""DEFAULT is the C++ initializer on LibreTiny, so the setter is skipped."""
main_cpp = generate_main(
"tests/component_tests/logger/test_logger_libretiny_default.yaml"
)
assert "set_uart_selection(" not in main_cpp
def test_libretiny_uart0_is_emitted(generate_main):
"""UART0 is not the LibreTiny initializer, so it must still be set."""
main_cpp = generate_main(
"tests/component_tests/logger/test_logger_libretiny_uart0.yaml"
)
assert "set_uart_selection(logger::UART_SELECTION_UART0);" in main_cpp
def test_ram_log_strings_is_deprecated(
generate_main: Callable[[str | Path], str],
caplog: pytest.LogCaptureFixture,
@@ -136,76 +168,35 @@ def test_log_v2_only_on_native_toolchain(
@pytest.mark.parametrize(
("config", "port", "zephyr_cdc_loop"),
("config", "expected"),
[
pytest.param("test_logger.yaml", "UART0", False, id="esp8266_default"),
pytest.param("test_logger_uart1.yaml", "UART1", False, id="esp8266_uart1"),
pytest.param(
"test_logger_uart0_swap.yaml", "UART0_SWAP", False, id="esp8266_uart0_swap"
),
pytest.param(
"test_logger_libretiny_default.yaml",
"DEFAULT",
False,
id="libretiny_default",
),
pytest.param(
"test_logger_libretiny_uart0.yaml", "UART0", False, id="libretiny_uart0"
),
pytest.param(
"test_logger_rp2_usb_cdc.yaml", "USB_CDC", False, id="rp2_usb_cdc"
),
pytest.param("test_logger_rp2_uart0.yaml", "UART0", False, id="rp2_uart0"),
pytest.param(
"test_logger_esp32_usb_cdc.yaml", "USB_CDC", False, id="esp32_usb_cdc"
),
pytest.param("test_logger_rp2_usb_cdc.yaml", {"USB_CDC"}, id="rp2_usb_cdc"),
pytest.param("test_logger_rp2_uart0.yaml", set(), id="rp2_uart0"),
pytest.param("test_logger_esp32_usb_cdc.yaml", {"USB_CDC"}, id="esp32_usb_cdc"),
pytest.param(
"test_logger_esp32_usb_serial_jtag.yaml",
"USB_SERIAL_JTAG",
False,
{"USB_SERIAL_JTAG"},
id="esp32_usb_serial_jtag",
),
pytest.param(
"test_logger_nrf52_usb_cdc.yaml", "USB_CDC", True, id="nrf52_usb_cdc"
),
pytest.param("test_logger_nrf52_usb_cdc.yaml", {"USB_CDC"}, id="nrf52_usb_cdc"),
# Zephyr polls the USB port only when it logs there
pytest.param(
"test_logger_nrf52_usb_cdc_no_serial.yaml",
"USB_CDC",
False,
id="nrf52_no_serial",
"test_logger_nrf52_usb_cdc_no_serial.yaml", set(), id="nrf52_no_serial"
),
],
)
def test_uart_selection_defines(
generate_main: Callable[[str | Path], str],
config: str,
port: str,
zephyr_cdc_loop: bool,
expected: set[str],
) -> None:
"""The chosen port is fixed at build time: one flag, its enum value and its dump_config name."""
"""USB ports get a selection define, which gates their port code and crash replay."""
generate_main(f"tests/component_tests/logger/{config}")
defines = {d.name: d.value for d in CORE.defines}
prefix = "USE_LOGGER_UART_SELECTION_"
assert {d.removeprefix(prefix) for d in defines if d.startswith(prefix)} == {port}
assert (
str(defines["ESPHOME_LOGGER_UART_SELECTION"])
== f"logger::UART_SELECTION_{port}"
)
assert str(defines["ESPHOME_LOGGER_UART_NAME"]) == f'"{port}"'
assert ("USE_LOGGER_ZEPHYR_CDC_LOOP" in defines) is zephyr_cdc_loop
def test_esp8266_without_serial_dumps_no_port(
generate_main: Callable[[str | Path], str],
) -> None:
"""ESP8266 without serial logging keeps UART0 selected but never opens it."""
generate_main("tests/component_tests/logger/test_logger_no_serial.yaml")
defines = {d.name: d.value for d in CORE.defines}
assert "USE_LOGGER_UART_SELECTION_UART0" in defines
assert str(defines["ESPHOME_LOGGER_UART_NAME"]) == '"NONE"'
assert {
d.name.removeprefix(prefix) for d in CORE.defines if d.name.startswith(prefix)
} == expected
def test_log_listener_slots_count_every_listener(
@@ -1,9 +0,0 @@
---
esphome:
name: test
esp8266:
board: d1_mini_lite
logger:
baud_rate: 0
@@ -1,9 +0,0 @@
---
esphome:
name: test
esp8266:
board: d1_mini_lite
logger:
hardware_uart: UART0_SWAP
+95 -2
View File
@@ -8,11 +8,16 @@ from esphome.components.npm1300 import (
CHARGER_SCHEMA,
NPM1300_UNSET,
OUTPUT_VOLTAGE,
THERMISTOR_NONE,
VBUS_CURRENT_LIMIT,
_charger_config,
_check_thermistor,
_config,
_output_config,
_termination_voltage_code,
_thermistor_resistance,
_vbus_current_limit_code,
thermistor_beta,
)
from esphome.const import CONF_MODE, CONF_VOLTAGE
from esphome.cpp_generator import StructInitializer
@@ -54,10 +59,35 @@ def test_termination_voltage_gap_rejected(voltage: str) -> None:
CHARGER_SCHEMA({"charge_current": "100mA", "termination_voltage": voltage})
def test_warm_termination_defaults_to_termination() -> None:
def test_warm_termination_defaults_to_reset_value() -> None:
fields = _charger({"charge_current": "100mA", "termination_voltage": "4.1V"})
assert fields["termination_voltage"] == "6"
assert fields["warm_termination_voltage"] == "6"
assert fields["warm_termination_voltage"] == "2"
@pytest.mark.parametrize(
("config", "warns"),
[
({"termination_voltage": "4.2V"}, True),
({"termination_voltage": "3.5V"}, False),
({"termination_voltage": "3.6V"}, False),
({}, False),
({"termination_voltage": "4.2V", "warm_termination_voltage": "4.0V"}, False),
],
)
def test_warm_termination_default_warning(
config: ConfigType, warns: bool, caplog: pytest.LogCaptureFixture
) -> None:
CHARGER_SCHEMA(config)
assert ("warm_termination_voltage" in caplog.text) is warns
@pytest.mark.parametrize(("termination", "code"), [("3.5V", "0"), ("3.55V", "1")])
def test_warm_termination_default_not_above_termination(
termination: str, code: str
) -> None:
fields = _charger({"termination_voltage": termination})
assert fields["warm_termination_voltage"] == code
def test_warm_termination_code() -> None:
@@ -112,3 +142,66 @@ def test_vbus_current_limit_code(limit: str, code: int) -> None:
def test_vbus_current_limit_rejected(limit: str) -> None:
with pytest.raises(cv.Invalid):
VBUS_CURRENT_LIMIT(limit)
def test_charger_needs_thermistor() -> None:
with pytest.raises(cv.Invalid, match="thermistor_resistance"):
_check_thermistor({"charger": {}})
config = {"charger": {}, "thermistor_resistance": THERMISTOR_NONE}
assert _check_thermistor(config) is config
@pytest.mark.parametrize("resistance", [None, THERMISTOR_NONE])
def test_thermistor_beta_needs_resistance(resistance: str | None) -> None:
config = {"thermistor_beta": 3380}
if resistance is not None:
config["thermistor_resistance"] = resistance
with pytest.raises(cv.Invalid, match="thermistor_beta"):
_check_thermistor(config)
@pytest.mark.parametrize(
("resistance", "beta"), [(10000.0, 3380), (47000.0, 4050), (100000.0, 4250)]
)
def test_thermistor_beta_default(resistance: float, beta: int) -> None:
assert thermistor_beta({"thermistor_resistance": resistance}) == beta
def test_thermistor_beta_configured() -> None:
config = {"thermistor_resistance": 47000.0, "thermistor_beta": 3950}
assert thermistor_beta(config) == 3950
@pytest.mark.parametrize(
("resistance", "code", "beta"),
[
(None, str(NPM1300_UNSET), "0"),
(THERMISTOR_NONE, "0", "0"),
(100000.0, "3", "4250"),
],
)
def test_config_thermistor(
resistance: str | float | None, code: str, beta: str
) -> None:
config = {} if resistance is None else {"thermistor_resistance": resistance}
fields = _fields(_config(config))
assert fields["thermistor"] == code
assert fields["thermistor_beta"] == beta
@pytest.mark.parametrize(
("value", "result"),
[
("10kOhm", 10000.0),
("0.047MOhm", 47000.0),
("100000", 100000.0),
("None", "none"),
],
)
def test_thermistor_resistance(value: str, result: float | str) -> None:
assert _thermistor_resistance(value) == result
def test_thermistor_resistance_rejected() -> None:
with pytest.raises(cv.Invalid, match="10kOhm, 47kOhm, 100kOhm or none"):
_thermistor_resistance("22kOhm")
@@ -0,0 +1,15 @@
esphome:
name: libretiny-pin-choices
rtl87xx:
board: bw15
uart:
- id: routed_uart
tx_pin: PA03
rx_pin: PA02
baud_rate: 9600
- id: default_uart
tx_pin: PA14
rx_pin: PA13
baud_rate: 9600
@@ -0,0 +1,139 @@
"""Tests for picking a LibreTiny hardware UART from the board's pin lists."""
from collections.abc import Callable
from pathlib import Path
import pytest
from esphome import config, yaml_util
from esphome.core import CORE
CONFIG = """
esphome:
name: libretiny-uart-pins
rtl87xx:
board: {board}
{framework}
uart:
{uart}
"""
def _write_config(path: Path, board: str, framework: str, pins: str) -> None:
"""One UART with these pins, or the pins text as is when it already lists entries."""
uart = pins if pins.startswith(" - ") else f" baud_rate: 9600\n{pins}"
path.write_text(
CONFIG.format(board=board, framework=framework, uart=uart), encoding="utf-8"
)
def test_port_with_pin_choices_is_routed(
generate_main: Callable[[str | Path], str],
component_config_path: Callable[[str], Path],
) -> None:
"""The port is picked in codegen, and only a port with pin choices gets its pins passed."""
main_cpp = generate_main(component_config_path("libretiny_pin_choices.yaml"))
assert "routed_uart->set_hardware_port(1);" in main_cpp
assert "default_uart->set_hardware_port(0);" in main_cpp
assert any(
define.name == "USE_UART_LIBRETINY_PIN_ROUTING" for define in CORE.defines
)
@pytest.mark.parametrize(
("board", "framework", "pins", "error"),
[
pytest.param(
"bw15", "", " tx_pin: PA03\n rx_pin: PA02", None, id="second_pair"
),
pytest.param(
"bw15", "", " tx_pin: PA01\n rx_pin: PA02", None, id="mixed_pair"
),
pytest.param("bw15", "", " tx_pin: PA14", None, id="default_pins_tx_only"),
pytest.param(
"bw15",
"",
" tx_pin: PA03",
"UART1 of board bw15 has no default RX pin, so it needs rx_pin",
id="pin_choices_tx_only",
),
pytest.param(
"bw15",
"",
" tx_pin: PA17\n rx_pin: PA18",
"UART1: TX=1/3, RX=0/2",
id="no_uart_on_pins",
),
pytest.param(
"bw15",
" framework:\n version: 1.11.0",
" tx_pin: PA03\n rx_pin: PA02",
"needs LibreTiny 1.12.0 or later",
id="old_libretiny",
),
pytest.param(
"bw15",
"",
" - id: uart_a\n baud_rate: 9600\n tx_pin: PA01\n rx_pin: PA00\n"
" - id: uart_b\n baud_rate: 9600\n tx_pin: PA03\n rx_pin: PA02",
"already uses hardware UART1 of board bw15",
id="two_entries_one_port",
),
# Pin flags force SoftwareSerial on RTL8710B, so these do not share hardware UART0
pytest.param(
"generic-rtl8710bn-2mb-788k",
"",
" - id: uart_a\n baud_rate: 9600\n tx_pin:\n number: PA23\n"
" mode:\n output: true\n open_drain: true\n"
" - id: uart_b\n baud_rate: 9600\n rx_pin:\n number: PA18\n"
" mode:\n input: true\n pullup: true",
None,
id="software_serial_flags",
),
# UART1 TX has a default pin on this board; only RX has choices
pytest.param("wbru", "", " rx_pin: PA02", None, id="default_tx_rx_only"),
pytest.param(
"wbru",
"",
" tx_pin: PA03",
"UART1 of board wbru has no default RX pin, so it needs rx_pin",
id="default_tx_tx_only",
),
# RTL8710B falls back to SoftwareSerial
pytest.param(
"generic-rtl8710bn-2mb-788k",
"",
" tx_pin: PA05\n rx_pin: PA12",
None,
id="software_serial",
),
],
)
def test_pins_are_checked_against_the_board(
board: str, framework: str, pins: str, error: str | None, tmp_path: Path
) -> None:
path = tmp_path / "uart.yaml"
_write_config(path, board, framework, pins)
CORE.config_path = path
result = config.validate_config(yaml_util.load_yaml(path), {})
errors = [str(err) for err in result.errors]
if error is None:
assert errors == []
else:
assert any(error in err for err in errors), errors
def test_hardware_uarts_of_a_board_with_pin_choices(tmp_path: Path) -> None:
"""The libretiny component reports each UART's pins and whether they are choices."""
from esphome.components.libretiny import HardwareUart, get_hardware_uarts
path = tmp_path / "uart.yaml"
_write_config(path, "bw15", "", " tx_pin: PA14")
CORE.config_path = path
config.validate_config(yaml_util.load_yaml(path), {})
assert get_hardware_uarts() == [
HardwareUart(0, (14,), (13,), False, False),
HardwareUart(1, (1, 3), (0, 2), True, True),
HardwareUart(2, (16,), (15,), False, False),
]
+6
View File
@@ -0,0 +1,6 @@
from tests.testing_helpers import ComponentManifestOverride
def override_manifest(manifest: ComponentManifestOverride) -> None:
# bmi270 declares i2c on its motion platform, which the harness does not walk
manifest.dependencies = manifest.dependencies + ["i2c", "motion"]
+4 -15
View File
@@ -36,7 +36,6 @@ sensor:
name: "BMI270 Accel Z"
accuracy_decimals: 4
# Gyroscope axes (unit: °/s)
- platform: motion
motion_id: bmi270_motion
type: gyroscope_x
@@ -76,21 +75,11 @@ motion:
- platform: bmi270
id: bmi270_motion
i2c_id: i2c_bus
# Accelerometer full-scale range: 2G | 4G | 8G | 16G
accelerometer_range: 4G
# Accelerometer output data rate: 12_5HZ | 25HZ | 50HZ | 100HZ |
# 200HZ | 400HZ | 800HZ | 1600HZ
accelerometer_odr: 100HZ
# Gyroscope full-scale range: 125DPS | 250DPS | 500DPS | 1000DPS | 2000DPS
gyroscope_range: 2000DPS
# Gyroscope output data rate: 25HZ | 50HZ | 100HZ | 200HZ |
# 400HZ | 800HZ | 1600HZ | 3200HZ
gyroscope_odr: 200HZ
accelerometer_range: 8G
accelerometer_odr: 200HZ
gyroscope_range: 1000DPS
gyroscope_odr: 400HZ
aux_device: BMM150
aux_address: 0x10
axis_map:
x: y
y: x
+48
View File
@@ -0,0 +1,48 @@
#include <gmock/gmock.h>
#include <gtest/gtest.h>
#include "esphome/components/bmi270/bmm150_aux.h"
namespace esphome::bmi270::bmm150::testing {
// The axis decode before it used encode_value_le, kept as the reference
static BMM150Data reference_convert(const BMM150Trim &trim, const uint8_t *raw) {
int16_t x = (int16_t) (((int16_t) (int8_t) raw[1] * 32) | (raw[0] >> 3));
int16_t y = (int16_t) (((int16_t) (int8_t) raw[3] * 32) | (raw[2] >> 3));
int16_t z = (int16_t) (((int16_t) (int8_t) raw[5] * 128) | (raw[4] >> 1));
uint16_t rhall = (uint16_t) (((uint16_t) raw[7] << 6) | (raw[6] >> 2));
return BMM150Data{
.x = bmm150_compensate_xy(trim, trim.x1, trim.x2, x, rhall),
.y = bmm150_compensate_xy(trim, trim.y1, trim.y2, y, rhall),
.z = bmm150_compensate_z(trim, z, rhall),
};
}
TEST(BMM150Convert, MatchesTheReferenceForEveryWordOfEachField) {
const BMM150Trim trim{.x1 = 0,
.y1 = 0,
.x2 = 26,
.y2 = 26,
.xy2 = -3,
.xy1 = 29,
.z2 = 760,
.z3 = 0,
.z4 = 0,
.z1 = 24786,
.xyz1 = 7101};
// Sweep one field through every 16-bit value while the others hold mid-range readings
for (int field = 0; field < 4; field++) {
for (uint32_t word = 0; word <= 0xFFFF; word++) {
uint8_t raw[8] = {0x10, 0x12, 0x20, 0xF0, 0x30, 0x08, 0x40, 0x1A};
raw[2 * field] = word & 0xFF;
raw[2 * field + 1] = word >> 8;
const BMM150Data got = bmm150_convert(trim, raw);
const BMM150Data want = reference_convert(trim, raw);
ASSERT_THAT(got.x, ::testing::NanSensitiveFloatEq(want.x)) << "field " << field << " word 0x" << std::hex << word;
ASSERT_THAT(got.y, ::testing::NanSensitiveFloatEq(want.y)) << "field " << field << " word 0x" << std::hex << word;
ASSERT_THAT(got.z, ::testing::NanSensitiveFloatEq(want.z)) << "field " << field << " word 0x" << std::hex << word;
}
}
}
} // namespace esphome::bmi270::bmm150::testing
@@ -0,0 +1,69 @@
#ifdef USE_HOST
#include <gtest/gtest.h>
#include <array>
#include <cstring>
#include "esphome/components/bmi270/bmi270.h"
#include "esphome/components/bmi270/bmi270_config.h"
namespace esphome::bmi270::testing {
// Host builds upload in 256-byte bursts
static constexpr size_t MAX_BURST = 256;
// A BMI270 register file: writes go to consecutive registers, except INIT_DATA, which streams into
// the config memory at the word address set in INIT_ADDR_0/1
class Bmi270Bus final : public i2c::I2CBus {
public:
std::array<uint8_t, 128> regs{};
std::array<uint8_t, sizeof(BMI270_CONFIG_FILE)> config_memory{};
unsigned upload_writes{0};
Bmi270Bus() {
this->regs[BMI270_REG_CHIP_ID] = BMI270_CHIP_ID_VALUE;
this->regs[BMI270_REG_INTERNAL_STATUS] = BMI270_INTERNAL_STATUS_INIT_OK;
}
i2c::ErrorCode write_readv(uint8_t address, const uint8_t *data, size_t size, uint8_t *out,
size_t out_size) override {
if (size == 0)
return i2c::ERROR_INVALID_ARGUMENT;
uint8_t reg = data[0];
if (size > 1) {
if (reg == BMI270_REG_INIT_ADDR_0 || reg == BMI270_REG_INIT_ADDR_0 + 1 || reg == BMI270_REG_INIT_DATA)
++this->upload_writes;
if (reg == BMI270_REG_INIT_DATA) {
size_t offset =
2 * ((this->regs[BMI270_REG_INIT_ADDR_0] & 0x0F) | (this->regs[BMI270_REG_INIT_ADDR_0 + 1] << 4));
if (offset + size - 1 > this->config_memory.size())
return i2c::ERROR_INVALID_ARGUMENT;
std::memcpy(this->config_memory.data() + offset, data + 1, size - 1);
} else {
for (size_t i = 1; i < size; i++)
this->regs[(reg + i - 1) & 0x7F] = data[i];
}
}
for (size_t i = 0; i < out_size; i++)
out[i] = this->regs[(reg + i) & 0x7F];
return i2c::ERROR_OK;
}
};
TEST(BMI270ConfigUpload, UploadsTheWholeConfigFileInOrder) {
Bmi270Bus bus;
BMI270Component imu;
imu.set_i2c_bus(&bus);
imu.set_i2c_address(0x68);
imu.setup();
EXPECT_FALSE(imu.is_failed());
EXPECT_EQ(0, std::memcmp(bus.config_memory.data(), BMI270_CONFIG_FILE, sizeof(BMI270_CONFIG_FILE)));
EXPECT_EQ(bus.regs[BMI270_REG_INIT_CTRL], BMI270_INIT_CTRL_LOAD_DONE);
// One INIT_ADDR write and one INIT_DATA write per burst
EXPECT_EQ(bus.upload_writes, 2 * ((sizeof(BMI270_CONFIG_FILE) + MAX_BURST - 1) / MAX_BURST));
}
} // namespace esphome::bmi270::testing
#endif
+6
View File
@@ -0,0 +1,6 @@
from tests.testing_helpers import ComponentManifestOverride
def override_manifest(manifest: ComponentManifestOverride) -> None:
# touchscreen.h includes display.h
manifest.dependencies = manifest.dependencies + ["display"]
+42
View File
@@ -0,0 +1,42 @@
#pragma once
#include <array>
#include <gtest/gtest.h>
#include "esphome/components/cst816/touchscreen/cst816_touchscreen.h"
namespace esphome::cst816::testing {
static constexpr uint8_t ADDRESS = 0x15;
// The driver reads REG_STATUS onwards in one transfer: status, gesture, touch count, then two points.
static constexpr size_t FRAME_SIZE = 13;
/// Serves one fixed status frame.
class FrameBus final : public i2c::I2CBus {
public:
explicit FrameBus(std::array<uint8_t, FRAME_SIZE> frame) : frame_(frame) {}
i2c::ErrorCode write_readv(uint8_t address, const uint8_t *write_buffer, size_t write_count, uint8_t *read_buffer,
size_t read_count) override {
EXPECT_EQ(address, ADDRESS);
for (size_t i = 0; i < read_count; i++)
read_buffer[i] = i < FRAME_SIZE ? this->frame_[i] : 0;
return i2c::ERROR_OK;
}
protected:
std::array<uint8_t, FRAME_SIZE> frame_;
};
inline std::array<uint8_t, FRAME_SIZE> make_frame(uint8_t touch_num, uint16_t x = 0, uint16_t y = 0) {
std::array<uint8_t, FRAME_SIZE> frame{};
frame[REG_TOUCH_NUM] = touch_num;
frame[REG_XPOS_HIGH] = (x >> 8) & 0x0F;
frame[REG_XPOS_LOW] = x & 0xFF;
frame[REG_YPOS_HIGH] = (y >> 8) & 0x0F;
frame[REG_YPOS_LOW] = y & 0xFF;
return frame;
}
} // namespace esphome::cst816::testing
@@ -0,0 +1,88 @@
#include <gtest/gtest.h>
#include <memory>
#include "../common.h"
namespace esphome::cst816::testing {
class CST816TouchscreenTest : public ::testing::Test {
protected:
void feed_(const std::array<uint8_t, FRAME_SIZE> &frame) {
this->bus_ = std::make_unique<FrameBus>(frame);
this->touchscreen_.set_i2c_bus(this->bus_.get());
this->touchscreen_.set_i2c_address(ADDRESS);
this->touchscreen_.update_touches();
}
std::unique_ptr<FrameBus> bus_;
CST816Touchscreen touchscreen_;
};
// An idle frame reports 0xFF in the touch count byte and 0xFFF coordinates. Masking 0xFF to the
// low two bits turns that into three touches at the maximum position, a phantom tap.
TEST_F(CST816TouchscreenTest, IdleAllOnesFrameIsIgnored) {
this->feed_(make_frame(0xFF, 0x0FFF, 0x0FFF));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
TEST_F(CST816TouchscreenTest, ZeroTouchCountIsIgnored) {
this->feed_(make_frame(0));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// Three is the boundary the guard rejects: the old mask turned a count of three into three
// touches, so this is the value whose behaviour changes.
TEST_F(CST816TouchscreenTest, TouchCountThreeIsIgnored) {
this->feed_(make_frame(3, 100, 200));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// The count is the whole low nibble, so 0x05 must not be masked down to one touch by a 0x03 mask.
TEST_F(CST816TouchscreenTest, TouchCountFiveIsIgnored) {
this->feed_(make_frame(0x05, 100, 200));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
TEST_F(CST816TouchscreenTest, SingleTouchIsReported) {
this->feed_(make_frame(1, 300, 100));
auto touches = this->touchscreen_.get_touches();
ASSERT_EQ(touches.size(), 1u);
EXPECT_EQ(touches[0].x_raw, 300);
EXPECT_EQ(touches[0].y_raw, 100);
}
// CST826/CST836 can report two points; the driver only consumes the first one.
TEST_F(CST816TouchscreenTest, TwoPointFrameReportsFirstPoint) {
this->feed_(make_frame(2, 300, 100));
auto touches = this->touchscreen_.get_touches();
ASSERT_EQ(touches.size(), 1u);
EXPECT_EQ(touches[0].x_raw, 300);
EXPECT_EQ(touches[0].y_raw, 100);
}
TEST_F(CST816TouchscreenTest, SentinelPositionIsIgnored) {
this->feed_(make_frame(1, 0x0FFF, 100));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// The sentinel is checked on both axes; a valid X with Y=0xFFF is still an idle reading.
TEST_F(CST816TouchscreenTest, SentinelYPositionIsIgnored) {
this->feed_(make_frame(1, 100, 0x0FFF));
EXPECT_TRUE(this->touchscreen_.get_touches().empty());
}
// x_raw_max_/y_raw_max_ are calibration endpoints, not validity limits: the base class applies them
// after swapping axes and clamps readings outside them. A touch beyond the calibrated maximum is
// still a real touch and must reach the base class.
TEST_F(CST816TouchscreenTest, CalibrationBoundsDoNotDropTouches) {
this->touchscreen_.set_calibration(0, 240, 0, 320);
this->touchscreen_.set_swap_xy(true);
this->feed_(make_frame(1, 300, 100));
auto touches = this->touchscreen_.get_touches();
ASSERT_EQ(touches.size(), 1u);
EXPECT_EQ(touches[0].x_raw, 100);
EXPECT_EQ(touches[0].y_raw, 300);
}
} // namespace esphome::cst816::testing
Loaded 100 of 136 files, more files were not shown because too many files have changed in this diff. Show more