[libretiny] Use standard logger tag names

Bump bundled esphome-device-builder to 1.2.0 (#17430 )
[espnow] Add max_payload_size option for ESP-NOW v2 frames (#17360 )
2026-07-06 23:19:36 +00:00 · 2026-07-06 17:28:14 -05:00 · 2026-07-06 17:09:51 -05:00 · 2026-07-06 17:08:56 -04:00 · 2026-07-07 08:20:24 +12:00 · 2026-07-07 07:55:53 +12:00
372 changed files with 1892 additions and 1546 deletions
@@ -32,7 +32,7 @@ runs:
      # detects the activated venv via ``VIRTUAL_ENV`` so the venv layout
      # downstream jobs rely on is preserved.
      if: steps.cache-venv.outputs.cache-hit != 'true'
-      uses: astral-sh/setup-uv@fac544c07dec837d0ccb6301d7b5580bf5edae39 # v8.2.0
+      uses: astral-sh/setup-uv@d31148d669074a8d0a63714ba94f3201e7020bc3 # v8.3.0
      with:
        enable-cache: true
        # Pin uv version so the action does not have to fetch the
@@ -29,7 +29,7 @@ jobs:
      - name: Set up uv
        # ``--system`` (below) installs into the setup-python interpreter;
        # no venv is created or restored by this workflow.
-        uses: astral-sh/setup-uv@fac544c07dec837d0ccb6301d7b5580bf5edae39 # v8.2.0
+        uses: astral-sh/setup-uv@d31148d669074a8d0a63714ba94f3201e7020bc3 # v8.3.0
        with:
          enable-cache: true
          # Pin uv version so the action does not have to fetch the
@@ -49,7 +49,7 @@ jobs:
        # detects the activated venv via ``VIRTUAL_ENV`` so downstream jobs
        # that ``. venv/bin/activate`` see an identical layout.
        if: steps.cache-venv.outputs.cache-hit != 'true'
-        uses: astral-sh/setup-uv@fac544c07dec837d0ccb6301d7b5580bf5edae39 # v8.2.0
+        uses: astral-sh/setup-uv@d31148d669074a8d0a63714ba94f3201e7020bc3 # v8.3.0
        with:
          enable-cache: true
          # Pin uv version so the action does not have to fetch the
@@ -112,7 +112,7 @@ jobs:
          script/build_codeowners.py --check
          script/build_language_schema.py --check
          script/generate-esp32-boards.py --check
-          script/generate-rp2040-boards.py --check
+          script/generate-rp2-boards.py --check
          script/ci_check_duplicate_test_ids.py

  import-time:
@@ -171,7 +171,7 @@ jobs:
        # install step (order-of-magnitude faster on cold boots,
        # with its own wheel cache). actions/setup-python still
        # provides the interpreter.
-        uses: astral-sh/setup-uv@fac544c07dec837d0ccb6301d7b5580bf5edae39 # v8.2.0
+        uses: astral-sh/setup-uv@d31148d669074a8d0a63714ba94f3201e7020bc3 # v8.3.0
        with:
          enable-cache: true
          # Pin uv version so the action does not have to fetch the
@@ -372,7 +372,7 @@ jobs:
      - name: Set up uv
        # Only needed on cache miss to populate the venv.
        if: steps.cache-venv.outputs.cache-hit != 'true'
-        uses: astral-sh/setup-uv@fac544c07dec837d0ccb6301d7b5580bf5edae39 # v8.2.0
+        uses: astral-sh/setup-uv@d31148d669074a8d0a63714ba94f3201e7020bc3 # v8.3.0
        with:
          enable-cache: true
          # Pin uv version so the action does not have to fetch the
@@ -47,7 +47,7 @@ jobs:
        # setup-python interpreter so subsequent ``pre-commit`` /
        # ``script/run-in-env.py`` steps find the deps without a
        # ``uv run`` prefix.
-        uses: astral-sh/setup-uv@fac544c07dec837d0ccb6301d7b5580bf5edae39 # v8.2.0
+        uses: astral-sh/setup-uv@d31148d669074a8d0a63714ba94f3201e7020bc3 # v8.3.0
        with:
          enable-cache: true
          # Pin uv version so the action does not have to fetch the
@@ -427,13 +427,14 @@ This document provides essential context for AI models interacting with this pro

        When a PR's only edits to a component are `validate.*.yaml` files (no source changes, no `test.*.yaml` changes, and the component isn't pulled in as a dependency of another changed component), CI skips the compile stage for that component entirely and only runs config validation. This is decided in `script/determine-jobs.py` via `_component_change_is_validate_only` and surfaced as the `validate_only_components` output that the `test-build-components-split` job consumes.

-    *   **Test Grouping with Packages:** Components that use shared bus packages can be grouped together in CI to reduce build count. **Never define buses (uart, i2c, spi, modbus) directly in test YAML files** — always use packages from `test_build_components/common/`:
+    *   **Test Grouping with Packages:** Components that use shared bus packages can be grouped together in CI to reduce build count. **Never define buses (uart, i2c, spi, modbus) directly in test YAML files** — always use packages from `test_build_components/common/`.
+
+        All includes in test files must go through dict-style `packages:` so that batch grouping works correctly — the grouping scripts only understand dict-style packages. Never use list-style packages (`packages: [- !include ...]`) or top-level merge keys (`<<: !include common.yaml`). Bus packages are keyed by the bus name; the component's `common.yaml` is keyed by the component name (e.g. `cst328: !include common.yaml`):
        ```yaml
-        # test.esp32-idf.yaml — use packages for buses
+        # test.esp32-idf.yaml — everything included via named packages
        packages:
          uart: !include ../../test_build_components/common/uart_115200/esp32-idf.yaml
-
-        <<: !include common.yaml
+          my_component: !include common.yaml
        ```
        ```yaml
        # common.yaml — component config only, NO bus definitions
@@ -426,7 +426,7 @@ esphome/components/rf_bridge/* @jesserockz
 esphome/components/rgbct/* @jesserockz
 esphome/components/ring_buffer/* @kahrendt
 esphome/components/router/speaker/* @kahrendt
-esphome/components/rp2040/* @jesserockz
+esphome/components/rp2/* @jesserockz
 esphome/components/rp2040_ble/* @bdraco
 esphome/components/rp2040_pio_led_strip/* @Papa-DMan
 esphome/components/rp2040_pwm/* @jesserockz
@@ -22,7 +22,7 @@ RUN \
    -r /requirements.txt

 # Install the ESPHome Device Builder dashboard.
-RUN uv pip install --no-cache-dir esphome-device-builder==1.1.0
+RUN uv pip install --no-cache-dir esphome-device-builder==1.2.0

 RUN \
    platformio settings set enable_telemetry No \
@@ -355,7 +355,7 @@ def choose_upload_log_host(
    bootsel_permission_error = False
    if (
        purpose == Purpose.UPLOADING
-        and CORE.is_rp2040
+        and CORE.is_rp2
        and (picotool := _find_picotool()) is not None
    ):
        bootsel = detect_rp2040_bootsel(picotool)
@@ -402,7 +402,7 @@ def choose_upload_log_host(
    # Show helpful BOOTSEL instructions for RP2040 when no BOOTSEL device is found
    if (
        purpose == Purpose.UPLOADING
-        and CORE.is_rp2040
+        and CORE.is_rp2
        and not any(get_port_type(opt[1]) == PortType.BOOTSEL for opt in options)
    ):
        if bootsel_permission_error:
@@ -985,7 +985,7 @@ def upload_using_platformio(config: ConfigType, port: str) -> int:
    # RP2040 platform-raspberrypi build recipe expects firmware.bin.signed for
    # the upload target, but 'nobuild' skips the build phase that creates it.
    # Create it here so the upload doesn't fail.
-    if CORE.is_rp2040:
+    if CORE.is_rp2:
        idedata = toolchain.get_idedata(config)
        build_dir = Path(idedata.firmware_elf_path).parent
        firmware_bin = build_dir / "firmware.bin"
@@ -1173,7 +1173,7 @@ def upload_program(
        if CORE.is_esp32 or CORE.is_esp8266:
            file = getattr(args, "file", None)
            exit_code = upload_using_esptool(config, host, file, args.upload_speed)
-        elif CORE.is_rp2040 or CORE.is_libretiny:
+        elif CORE.is_rp2 or CORE.is_libretiny:
            exit_code = upload_using_platformio(config, host)
        # else: Unknown target platform, exit_code remains 1

@@ -1647,7 +1647,7 @@ def command_run(args: ArgsProtocol, config: ConfigType) -> int | None:

    # After BOOTSEL upload, wait for a new serial port to appear
    # so it shows up in the log chooser
-    if successful_device is None and CORE.is_rp2040:
+    if successful_device is None and CORE.is_rp2:
        _wait_for_serial_port(known_ports=pre_upload_ports)
        # If exactly one new serial port appeared, use it directly
        serial_ports = get_serial_ports()
@@ -0,0 +1,6 @@
+# Importing `esphome.loader` here installs the component-alias
+# ``sys.meta_path`` finder before any submodule lookup runs. Without this,
+# `from esphome.components import <legacy_alias>` from a fresh interpreter
+# can race the finder install and raise ImportError, since the legacy
+# alias dir no longer exists on disk.
+from esphome import loader as _loader  # noqa: F401
@@ -227,12 +227,12 @@ ESP32_VARIANT_ADC2_PIN_TO_CHANNEL = {

 def validate_adc_pin(value):
    if str(value).upper() == "VCC":
-        if CORE.is_rp2040:
+        if CORE.is_rp2:
            return pins.internal_gpio_input_pin_schema(29)
        return cv.only_on([PLATFORM_ESP8266])("VCC")

    if str(value).upper() == "TEMPERATURE":
-        return cv.only_on_rp2040("TEMPERATURE")
+        return cv.only_on_rp2("TEMPERATURE")

    if CORE.is_esp32:
        conf = pins.internal_gpio_input_pin_schema(value)
@@ -261,11 +261,11 @@ def validate_adc_pin(value):
            raise cv.Invalid("ESP8266: Only pin A0 (GPIO17) supports ADC")
        return conf

-    if CORE.is_rp2040:
+    if CORE.is_rp2:
        conf = pins.internal_gpio_input_pin_schema(value)
        number = conf[CONF_NUMBER]
        if number not in (26, 27, 28, 29):
-            raise cv.Invalid("RP2040: Only pins 26, 27, 28 and 29 support ADC")
+            raise cv.Invalid("RP2: Only pins 26, 27, 28 and 29 support ADC")
        return conf

    if CORE.is_libretiny:
@@ -123,9 +123,9 @@ class ADCSensor final : public sensor::Sensor, public PollingComponent, public v
  void set_autorange(bool autorange) { this->autorange_ = autorange; }
 #endif  // USE_ESP32

-#ifdef USE_RP2040
+#ifdef USE_RP2
  void set_is_temperature() { this->is_temperature_ = true; }
-#endif  // USE_RP2040
+#endif  // USE_RP2

 protected:
  uint8_t sample_count_{1};
@@ -152,9 +152,9 @@ class ADCSensor final : public sensor::Sensor, public PollingComponent, public v
  static adc_oneshot_unit_handle_t shared_adc_handles[2];
 #endif  // USE_ESP32

-#ifdef USE_RP2040
+#ifdef USE_RP2
  bool is_temperature_{false};
-#endif  // USE_RP2040
+#endif  // USE_RP2

 #ifdef USE_ZEPHYR
  const struct adc_dt_spec *channel_ = nullptr;
@@ -1,4 +1,4 @@
-#ifdef USE_RP2040
+#ifdef USE_RP2

 #include "adc_sensor.h"
 #include "esphome/core/log.h"
@@ -17,7 +17,7 @@

 namespace esphome::adc {

-static const char *const TAG = "adc.rp2040";
+static const char *const TAG = "adc.rp2";

 void ADCSensor::setup() {
  static bool initialized = false;
@@ -102,4 +102,4 @@ float ADCSensor::sample() {

 }  // namespace esphome::adc

-#endif  // USE_RP2040
+#endif  // USE_RP2
@@ -201,7 +201,7 @@ FILTER_SOURCE_FILES = filter_source_files_from_platform(
            PlatformFramework.ESP32_IDF,
        },
        "adc_sensor_esp8266.cpp": {PlatformFramework.ESP8266_ARDUINO},
-        "adc_sensor_rp2040.cpp": {PlatformFramework.RP2040_ARDUINO},
+        "adc_sensor_rp2.cpp": {PlatformFramework.RP2_ARDUINO},
        "adc_sensor_libretiny.cpp": {
            PlatformFramework.BK72XX_ARDUINO,
            PlatformFramework.RTL87XX_ARDUINO,
@@ -300,7 +300,7 @@ CONFIG_SCHEMA = cv.All(
                CONF_LISTEN_BACKLOG,
                esp8266=1,  # Limited RAM (~40KB free), LWIP raw sockets
                esp32=4,  # More RAM (520KB), BSD sockets
-                rp2040=1,  # Limited RAM (264KB), LWIP raw sockets like ESP8266
+                rp2=1,  # Limited RAM (264KB), LWIP raw sockets like ESP8266
                bk72xx=4,  # Moderate RAM, BSD-style sockets
                rtl87xx=4,  # Moderate RAM, BSD-style sockets
                host=4,  # Abundant resources
@@ -311,7 +311,7 @@ CONFIG_SCHEMA = cv.All(
                CONF_MAX_CONNECTIONS,
                esp8266=4,  # ~40KB free RAM, each connection uses ~500-1000 bytes
                esp32=5,  # 520KB RAM available
-                rp2040=4,  # 264KB RAM but LWIP constraints
+                rp2=4,  # 264KB RAM but LWIP constraints
                bk72xx=5,  # Moderate RAM
                rtl87xx=5,  # Moderate RAM
                host=8,  # Abundant resources
@@ -326,7 +326,7 @@ CONFIG_SCHEMA = cv.All(
                CONF_MAX_SEND_QUEUE,
                esp8266=4,  # Limited RAM, need to fail fast
                esp32=8,  # More RAM, can buffer more
-                rp2040=8,  # Moderate RAM
+                rp2=8,  # Moderate RAM
                bk72xx=8,  # Moderate RAM
                nrf52=8,  # Moderate RAM
                rtl87xx=8,  # Moderate RAM
@@ -1759,7 +1759,7 @@ bool APIConnection::send_device_info_response_() {
  // Manufacturer string - define once, handle ESP8266 PROGMEM separately
 #if defined(USE_ESP8266) || defined(USE_ESP32)
 #define ESPHOME_MANUFACTURER "Espressif"
-#elif defined(USE_RP2040)
+#elif defined(USE_RP2)
 #define ESPHOME_MANUFACTURER "Raspberry Pi"
 #elif defined(USE_BK72XX)
 #define ESPHOME_MANUFACTURER "Beken"
@@ -18,8 +18,8 @@
 #ifdef USE_ESP32_CRASH_HANDLER
 #include "esphome/components/esp32/crash_handler.h"
 #endif
-#ifdef USE_RP2040_CRASH_HANDLER
-#include "esphome/components/rp2040/crash_handler.h"
+#ifdef USE_RP2_CRASH_HANDLER
+#include "esphome/components/rp2/crash_handler.h"
 #endif
 #ifdef USE_ESP8266_CRASH_HANDLER
 #include "esphome/components/esp8266/crash_handler.h"
@@ -279,8 +279,8 @@ class APIConnection final : public APIServerConnectionBase {
    esp32::crash_handler_log();
    esp32::crash_handler_clear();
 #endif
-#ifdef USE_RP2040_CRASH_HANDLER
-    rp2040::crash_handler_log();
+#ifdef USE_RP2_CRASH_HANDLER
+    rp2::crash_handler_log();
 #endif
 #ifdef USE_ESP8266_CRASH_HANDLER
    esp8266::crash_handler_log();
@@ -13,7 +13,7 @@ def AUTO_LOAD() -> list[str]:
    if (
        not CORE.is_esp32
        and not CORE.is_esp8266
-        and not CORE.is_rp2040
+        and not CORE.is_rp2
        and not CORE.is_libretiny
    ):
        return ["socket"]
@@ -37,7 +37,7 @@ async def to_code(config):
    elif CORE.is_esp8266:
        # https://github.com/ESP32Async/ESPAsyncTCP
        cg.add_library("ESP32Async/ESPAsyncTCP", "2.0.0")
-    elif CORE.is_rp2040:
+    elif CORE.is_rp2:
        # https://github.com/ayushsharma82/RPAsyncTCP
        # RPAsyncTCP is a drop-in replacement for AsyncTCP_RP2040W with better
        # ESPAsyncWebServer compatibility
@@ -47,6 +47,6 @@ async def to_code(config):

 def FILTER_SOURCE_FILES() -> list[str]:
    # Exclude socket implementation for platforms that use AsyncTCP libraries
-    if CORE.is_esp32 or CORE.is_esp8266 or CORE.is_rp2040 or CORE.is_libretiny:
+    if CORE.is_esp32 or CORE.is_esp8266 or CORE.is_rp2 or CORE.is_libretiny:
        return ["async_tcp_socket.cpp"]
    return []
@@ -7,7 +7,7 @@
 #elif defined(USE_ESP8266)
 // Use ESPAsyncTCP library for ESP8266 (always Arduino)
 #include <ESPAsyncTCP.h>
-#elif defined(USE_RP2040)
+#elif defined(USE_RP2)
 // Use RPAsyncTCP library for RP2040
 #include <RPAsyncTCP.h>
 #else
@@ -1,6 +1,6 @@
 #include "async_tcp_socket.h"

-#if !defined(USE_ESP32) && !defined(USE_ESP8266) && !defined(USE_RP2040) && !defined(USE_LIBRETINY) && \
+#if !defined(USE_ESP32) && !defined(USE_ESP8266) && !defined(USE_RP2) && !defined(USE_LIBRETINY) && \
    (defined(USE_SOCKET_IMPL_LWIP_SOCKETS) || defined(USE_SOCKET_IMPL_BSD_SOCKETS))

 #include "esphome/components/network/util.h"
@@ -2,7 +2,7 @@

 #include "esphome/core/defines.h"

-#if !defined(USE_ESP32) && !defined(USE_ESP8266) && !defined(USE_RP2040) && !defined(USE_LIBRETINY) && \
+#if !defined(USE_ESP32) && !defined(USE_ESP8266) && !defined(USE_RP2) && !defined(USE_LIBRETINY) && \
    (defined(USE_SOCKET_IMPL_LWIP_SOCKETS) || defined(USE_SOCKET_IMPL_BSD_SOCKETS))

 #include "esphome/components/socket/socket.h"
@@ -379,9 +379,17 @@ void BluetoothProxy::bluetooth_set_connection_params(const api::BluetoothSetConn
 }

 void BluetoothProxy::subscribe_api_connection(api::APIConnection *api_connection, uint32_t flags) {
-  if (this->api_connection_ != nullptr) {
-    ESP_LOGE(TAG, "Only one API subscription is allowed at a time");
-    return;
+  if (this->api_connection_ != nullptr && this->api_connection_ != api_connection) {
+    // A previous subscriber still holds the slot. This is almost always a stale
+    // connection from a client that dropped without a clean disconnect and has
+    // not yet hit the keepalive timeout; rejecting the new subscriber would
+    // silently starve it of advertisements until it reconnects, so the newest
+    // subscriber wins instead.
+    char old_peername[socket::SOCKADDR_STR_LEN];
+    char new_peername[socket::SOCKADDR_STR_LEN];
+    ESP_LOGW(TAG, "Subscription from %s (%s) replaces %s (%s)", api_connection->get_name(),
+             api_connection->get_peername_to(new_peername), this->api_connection_->get_name(),
+             this->api_connection_->get_peername_to(old_peername));
  }
  this->api_connection_ = api_connection;
  this->parent_->recalculate_advertisement_parser_types();
@@ -13,7 +13,7 @@ from esphome.const import (
    PLATFORM_ESP32,
    PLATFORM_ESP8266,
    PLATFORM_LN882X,
-    PLATFORM_RP2040,
+    PLATFORM_RP2,
    PLATFORM_RTL87XX,
    PlatformFramework,
 )
@@ -54,7 +54,7 @@ CONFIG_SCHEMA = cv.All(
            PLATFORM_ESP8266,
            PLATFORM_BK72XX,
            PLATFORM_LN882X,
-            PLATFORM_RP2040,
+            PLATFORM_RP2,
            PLATFORM_RTL87XX,
        ]
    ),
@@ -105,7 +105,7 @@ async def to_code(config):
    if config[CONF_COMPRESSION] == "gzip":
        cg.add_define("USE_CAPTIVE_PORTAL_GZIP")

-    if CORE.using_arduino and (CORE.is_esp8266 or CORE.is_libretiny or CORE.is_rp2040):
+    if CORE.using_arduino and (CORE.is_esp8266 or CORE.is_libretiny or CORE.is_rp2):
        cg.add_library("DNSServer", None)


@@ -70,7 +70,7 @@ FILTER_SOURCE_FILES = filter_source_files_from_platform(
        },
        "debug_esp8266.cpp": {PlatformFramework.ESP8266_ARDUINO},
        "debug_host.cpp": {PlatformFramework.HOST_NATIVE},
-        "debug_rp2040.cpp": {PlatformFramework.RP2040_ARDUINO},
+        "debug_rp2.cpp": {PlatformFramework.RP2_ARDUINO},
        "debug_libretiny.cpp": {
            PlatformFramework.BK72XX_ARDUINO,
            PlatformFramework.RTL87XX_ARDUINO,
@@ -1,5 +1,5 @@
 #include "debug_component.h"
-#ifdef USE_RP2040
+#ifdef USE_RP2
 #include "esphome/core/defines.h"
 #include "esphome/core/log.h"
 #include <Arduino.h>
@@ -9,8 +9,8 @@
 #else
 #include <hardware/structs/vreg_and_chip_reset.h>
 #endif
-#ifdef USE_RP2040_CRASH_HANDLER
-#include "esphome/components/rp2040/crash_handler.h"
+#ifdef USE_RP2_CRASH_HANDLER
+#include "esphome/components/rp2/crash_handler.h"
 #endif
 namespace esphome::debug {

@@ -41,8 +41,8 @@ const char *DebugComponent::get_reset_reason_(std::span<char, RESET_REASON_BUFFE

  if (watchdog_caused_reboot()) {
    bool handled = false;
-#ifdef USE_RP2040_CRASH_HANDLER
-    if (rp2040::crash_handler_has_data()) {
+#ifdef USE_RP2_CRASH_HANDLER
+    if (rp2::crash_handler_has_data()) {
      pos = buf_append_str(buf, size, pos, "Crash (HardFault)|");
      handled = true;
    }
@@ -12,7 +12,7 @@ namespace esphome {
 uint32_t random_uint32() { return os_random(); }
 bool random_bytes(uint8_t *data, size_t len) { return os_get_random(data, len) == 0; }

-// ESP8266 Mutex is defined inline as a no-op in helpers.h when USE_ESP8266 (or USE_RP2040) is set,
+// ESP8266 Mutex is defined inline as a no-op in helpers.h when USE_ESP8266 (or USE_RP2) is set,
 // independent of the ESPHOME_THREAD_SINGLE thread model define.

 IRAM_ATTR InterruptLock::InterruptLock() { state_ = xt_rsil(15); }
@@ -126,7 +126,7 @@ CONFIG_SCHEMA = cv.All(
                CONF_PORT,
                esp8266=8266,
                esp32=3232,
-                rp2040=2040,
+                rp2=2040,
                bk72xx=8892,
                ln882x=8820,
                rtl87xx=8892,
@@ -8,7 +8,7 @@
 #include "esphome/components/ota/ota_backend.h"
 #include "esphome/components/ota/ota_backend_esp8266.h"
 #include "esphome/components/ota/ota_backend_arduino_libretiny.h"
-#include "esphome/components/ota/ota_backend_arduino_rp2040.h"
+#include "esphome/components/ota/ota_backend_arduino_rp2.h"
 #include "esphome/components/ota/ota_backend_esp_idf.h"
 #include "esphome/core/application.h"
 #include "esphome/core/hal.h"
@@ -41,7 +41,7 @@ DeletePeerAction = espnow_ns.class_("DeletePeerAction", automation.Action)
 ESPNowHandlerTrigger = automation.Trigger.template(
    ESPNowRecvInfoConstRef,
    cg.uint8.operator("const").operator("ptr"),
-    cg.uint8,
+    cg.uint16,
 )

 OnUnknownPeerTrigger = espnow_ns.class_(
@@ -56,6 +56,20 @@ OnBroadcastTrigger = espnow_ns.class_(


 CONF_AUTO_ADD_PEER = "auto_add_peer"
+CONF_MAX_PAYLOAD_SIZE = "max_payload_size"
+
+# Payload limits of ESP-NOW v1 and v2 frames. The radio negotiates the
+# protocol version per peer on its own; the option only sizes this device's
+# packet buffers, whose static RAM cost is proportional to it (~8 KB at 250
+# bytes, ~44 KB at 1470).
+ESPNOW_PAYLOAD_V1 = 250
+ESPNOW_PAYLOAD_V2 = 1470
+
+# Config-time cap for action payloads. The per-device limit is the
+# ``max_payload_size`` option, which the action schema cannot see; send()
+# enforces it at runtime.
+MAX_ESPNOW_PACKET_SIZE = ESPNOW_PAYLOAD_V2
+
 CONF_PEERS = "peers"
 CONF_ON_SENT = "on_sent"
 CONF_ON_UNKNOWN_PEER = "on_unknown_peer"
@@ -63,7 +77,15 @@ CONF_ON_BROADCAST = "on_broadcast"
 CONF_CONTINUE_ON_ERROR = "continue_on_error"
 CONF_WAIT_FOR_SENT = "wait_for_sent"

-MAX_ESPNOW_PACKET_SIZE = 250  # Maximum size of the payload in bytes
+
+def _validate_max_payload_size(value: int) -> int:
+    if value > ESPNOW_PAYLOAD_V1:
+        return cv.require_framework_version(
+            esp_idf=cv.Version(5, 4, 0),
+            esp32_arduino=cv.Version(3, 2, 0),
+            extra_message="ESP-NOW v2 frames need an ESP-NOW v2 capable framework",
+        )(value)
+    return value


 def validate_channel(value):
@@ -78,6 +100,9 @@ CONFIG_SCHEMA = cv.All(
            cv.GenerateID(): cv.declare_id(ESPNowComponent),
            cv.OnlyWithout(CONF_CHANNEL, CONF_WIFI): validate_channel,
            cv.Optional(CONF_ENABLE_ON_BOOT, default=True): cv.boolean,
+            cv.Optional(CONF_MAX_PAYLOAD_SIZE, default=ESPNOW_PAYLOAD_V1): cv.All(
+                cv.int_range(min=1, max=ESPNOW_PAYLOAD_V2), _validate_max_payload_size
+            ),
            cv.Optional(CONF_AUTO_ADD_PEER, default=False): cv.boolean,
            cv.Optional(CONF_PEERS): cv.ensure_list(cv.mac_address),
            cv.Optional(CONF_ON_UNKNOWN_PEER): automation.validate_automation(
@@ -113,7 +138,7 @@ async def _trigger_to_code(config):
        [
            (ESPNowRecvInfoConstRef, "info"),
            (cg.uint8.operator("const").operator("ptr"), "data"),
-            (cg.uint8, "size"),
+            (cg.uint16, "size"),
        ],
        config,
    )
@@ -125,6 +150,7 @@ async def to_code(config):
    await cg.register_component(var, config)

    cg.add_define("USE_ESPNOW")
+    cg.add_define("USE_ESPNOW_MAX_PAYLOAD_SIZE", config[CONF_MAX_PAYLOAD_SIZE])
    if wifi_channel := config.get(CONF_CHANNEL):
        cg.add(var.set_wifi_channel(wifi_channel))

@@ -119,7 +119,7 @@ template<typename... Ts> class SetChannelAction final : public Action<Ts...>, pu
  }
 };

-class OnReceiveTrigger final : public Trigger<const ESPNowRecvInfo &, const uint8_t *, uint8_t>,
+class OnReceiveTrigger final : public Trigger<const ESPNowRecvInfo &, const uint8_t *, uint16_t>,
                               public ESPNowReceivedPacketHandler {
 public:
  explicit OnReceiveTrigger(std::array<uint8_t, ESP_NOW_ETH_ALEN> address) : has_address_(true) {
@@ -128,7 +128,7 @@ class OnReceiveTrigger final : public Trigger<const ESPNowRecvInfo &, const uint

  explicit OnReceiveTrigger() {}

-  bool on_receive(const ESPNowRecvInfo &info, const uint8_t *data, uint8_t size) override {
+  bool on_receive(const ESPNowRecvInfo &info, const uint8_t *data, uint16_t size) override {
    bool match = !this->has_address_ || (memcmp(this->address_, info.src_addr, ESP_NOW_ETH_ALEN) == 0);
    if (!match)
      return false;
@@ -141,15 +141,15 @@ class OnReceiveTrigger final : public Trigger<const ESPNowRecvInfo &, const uint
  bool has_address_{false};
  uint8_t address_[ESP_NOW_ETH_ALEN]{};
 };
-class OnUnknownPeerTrigger final : public Trigger<const ESPNowRecvInfo &, const uint8_t *, uint8_t>,
+class OnUnknownPeerTrigger final : public Trigger<const ESPNowRecvInfo &, const uint8_t *, uint16_t>,
                                   public ESPNowUnknownPeerHandler {
 public:
-  bool on_unknown_peer(const ESPNowRecvInfo &info, const uint8_t *data, uint8_t size) override {
+  bool on_unknown_peer(const ESPNowRecvInfo &info, const uint8_t *data, uint16_t size) override {
    this->trigger(info, data, size);
    return false;  // Return false to continue processing other internal handlers
  }
 };
-class OnBroadcastTrigger final : public Trigger<const ESPNowRecvInfo &, const uint8_t *, uint8_t>,
+class OnBroadcastTrigger final : public Trigger<const ESPNowRecvInfo &, const uint8_t *, uint16_t>,
                                 public ESPNowBroadcastHandler {
 public:
  explicit OnBroadcastTrigger(std::array<uint8_t, ESP_NOW_ETH_ALEN> address) : has_address_(true) {
@@ -157,7 +157,7 @@ class OnBroadcastTrigger final : public Trigger<const ESPNowRecvInfo &, const ui
  }
  explicit OnBroadcastTrigger() {}

-  bool on_broadcast(const ESPNowRecvInfo &info, const uint8_t *data, uint8_t size) override {
+  bool on_broadcast(const ESPNowRecvInfo &info, const uint8_t *data, uint16_t size) override {
    bool match = !this->has_address_ || (memcmp(this->address_, info.src_addr, ESP_NOW_ETH_ALEN) == 0);
    if (!match)
      return false;
@@ -4,6 +4,7 @@

 #include "espnow_err.h"

+#include <algorithm>
 #include <cinttypes>

 #include "esphome/core/application.h"
@@ -96,9 +97,9 @@ void on_send_report(const uint8_t *mac_addr, esp_now_send_status_t status)
 void on_data_received(const esp_now_recv_info_t *info, const uint8_t *data, int size) {
  // Drop oversized frames before copying. ESP-NOW v2 peers (IDF >= 5.4 builds a
  // v2 stack with no opt-out) can send up to ESP_NOW_MAX_DATA_LEN_V2 (1470 B),
-  // but our receive buffer is ESP_NOW_MAX_DATA_LEN (250 B); copying a larger
-  // frame would overflow packet_.receive.data.
-  if (size < 0 || size > ESP_NOW_MAX_DATA_LEN) {
+  // but the receive buffer only fits v2 frames with ``max_payload_size``; copying a
+  // larger frame would overflow packet_.receive.data.
+  if (size < 0 || size > ESPNOW_MAX_DATA_LEN) {
    global_esp_now->receive_packet_queue_.increment_dropped_count();
    return;
  }
@@ -285,11 +286,14 @@ void ESPNowComponent::loop() {
 #if ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_VERBOSE
          char src_buf[MAC_ADDRESS_PRETTY_BUFFER_SIZE];
          char dst_buf[MAC_ADDRESS_PRETTY_BUFFER_SIZE];
+          // Cap the hex dump at a v1 frame: a full v2 frame would need a
+          // ~4.4 KB stack buffer.
          char hex_buf[format_hex_pretty_size(ESP_NOW_MAX_DATA_LEN)];
          format_mac_addr_upper(info.src_addr, src_buf);
          format_mac_addr_upper(info.des_addr, dst_buf);
          ESP_LOGV(TAG, "<<< [%s -> %s] %s", src_buf, dst_buf,
-                   format_hex_pretty_to(hex_buf, packet->packet_.receive.data, packet->packet_.receive.size));
+                   format_hex_pretty_to(hex_buf, packet->packet_.receive.data,
+                                        std::min<uint16_t>(packet->packet_.receive.size, ESP_NOW_MAX_DATA_LEN)));
 #endif
          if (memcmp(info.des_addr, ESPNOW_BROADCAST_ADDR, ESP_NOW_ETH_ALEN) == 0) {
            for (auto *handler : this->broadcast_handlers_) {
@@ -362,7 +366,7 @@ esp_err_t ESPNowComponent::send(const uint8_t *peer_address, const uint8_t *payl
    return ESP_ERR_ESPNOW_PEER_NOT_SET;
  } else if (memcmp(peer_address, this->own_address_, ESP_NOW_ETH_ALEN) == 0) {
    return ESP_ERR_ESPNOW_OWN_ADDRESS;
-  } else if (size > ESP_NOW_MAX_DATA_LEN) {
+  } else if (size > ESPNOW_MAX_DATA_LEN) {
    return ESP_ERR_ESPNOW_DATA_SIZE;
  } else if (!esp_now_is_peer_exist(peer_address)) {
    if (memcmp(peer_address, ESPNOW_BROADCAST_ADDR, ESP_NOW_ETH_ALEN) == 0 || this->auto_add_peer_) {
@@ -62,7 +62,7 @@ class ESPNowUnknownPeerHandler {
  /// @param data Pointer to the received data payload
  /// @param size Size of the received data in bytes
  /// @return true if the packet was handled, false otherwise
-  virtual bool on_unknown_peer(const ESPNowRecvInfo &info, const uint8_t *data, uint8_t size) = 0;
+  virtual bool on_unknown_peer(const ESPNowRecvInfo &info, const uint8_t *data, uint16_t size) = 0;
 };

 /// Handler interface for receiving ESPNow packets
@@ -74,7 +74,7 @@ class ESPNowReceivedPacketHandler {
  /// @param data Pointer to the received data payload
  /// @param size Size of the received data in bytes
  /// @return true if the packet was handled, false otherwise
-  virtual bool on_receive(const ESPNowRecvInfo &info, const uint8_t *data, uint8_t size) = 0;
+  virtual bool on_receive(const ESPNowRecvInfo &info, const uint8_t *data, uint16_t size) = 0;
 };
 /// Handler interface for receiving ESPNow broadcast packets
 /// Components should inherit from this class to handle incoming ESPNow data
@@ -85,7 +85,7 @@ class ESPNowBroadcastHandler {
  /// @param data Pointer to the received data payload
  /// @param size Size of the received data in bytes
  /// @return true if the packet was handled, false otherwise
-  virtual bool on_broadcast(const ESPNowRecvInfo &info, const uint8_t *data, uint8_t size) = 0;
+  virtual bool on_broadcast(const ESPNowRecvInfo &info, const uint8_t *data, uint16_t size) = 0;
 };

 class ESPNowComponent final : public Component {
@@ -19,6 +19,23 @@ namespace esphome::espnow {
 static const uint8_t ESPNOW_BROADCAST_ADDR[ESP_NOW_ETH_ALEN] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
 static const uint8_t ESPNOW_MULTICAST_ADDR[ESP_NOW_ETH_ALEN] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE};

+// Maximum payload this component sends and receives, from the
+// ``max_payload_size`` option. The radio stack speaks ESP-NOW v2 regardless
+// (negotiated per peer); payloads beyond the v1 limit (250 bytes) are opt-in
+// because the packet pools are statically sized from this, so their RAM cost
+// is proportional (~8 KB at 250 bytes, ~44 KB at the v2 limit of 1470).
+#ifndef USE_ESPNOW_MAX_PAYLOAD_SIZE
+#define USE_ESPNOW_MAX_PAYLOAD_SIZE ESP_NOW_MAX_DATA_LEN
+#endif
+static constexpr uint16_t ESPNOW_MAX_DATA_LEN = USE_ESPNOW_MAX_PAYLOAD_SIZE;
+#ifdef ESP_NOW_MAX_DATA_LEN_V2
+static_assert(ESPNOW_MAX_DATA_LEN <= ESP_NOW_MAX_DATA_LEN_V2,
+              "espnow max_payload_size cannot exceed the ESP-NOW v2 frame limit");
+#else
+static_assert(ESPNOW_MAX_DATA_LEN <= ESP_NOW_MAX_DATA_LEN,
+              "espnow max_payload_size beyond 250 bytes requires an ESP-IDF with ESP-NOW v2 support (5.4+)");
+#endif
+
 struct WifiPacketRxControl {
  int8_t rssi;         // Received Signal Strength Indicator (RSSI) of packet, unit: dBm
  uint32_t timestamp;  // Timestamp in microseconds when the packet was received, precise only if modem sleep or
@@ -78,10 +95,10 @@ class ESPNowPacket {
  union {
    // NOLINTNEXTLINE(readability-identifier-naming)
    struct received_data {
-      ESPNowRecvInfo info;                 // Information about the received packet
-      uint8_t data[ESP_NOW_MAX_DATA_LEN];  // Data received in the packet
-      uint8_t size;                        // Size of the received data
-      WifiPacketRxControl rx_ctrl;         // Status of the received packet
+      ESPNowRecvInfo info;                // Information about the received packet
+      uint8_t data[ESPNOW_MAX_DATA_LEN];  // Data received in the packet
+      uint16_t size;                      // Size of the received data
+      WifiPacketRxControl rx_ctrl;        // Status of the received packet
    } receive;

    // NOLINTNEXTLINE(readability-identifier-naming)
@@ -144,15 +161,15 @@ class ESPNowSendPacket {
    this->callback_ = nullptr;  // Reset callback
  }

-  uint8_t address_[ESP_NOW_ETH_ALEN]{0};   // MAC address of the peer to send the packet to
-  uint8_t data_[ESP_NOW_MAX_DATA_LEN]{0};  // Data to send
-  uint8_t size_{0};                        // Size of the data to send, must be <= ESP_NOW_MAX_DATA_LEN
-  send_callback_t callback_{nullptr};      // Callback to call when the send operation is complete
+  uint8_t address_[ESP_NOW_ETH_ALEN]{0};  // MAC address of the peer to send the packet to
+  uint8_t data_[ESPNOW_MAX_DATA_LEN]{0};  // Data to send
+  uint16_t size_{0};                      // Size of the data to send, must be <= ESPNOW_MAX_DATA_LEN
+  send_callback_t callback_{nullptr};     // Callback to call when the send operation is complete

 private:
  void init_data_(const uint8_t *peer_address, const uint8_t *payload, size_t size) {
    memcpy(this->address_, peer_address, ESP_NOW_ETH_ALEN);
-    if (size > ESP_NOW_MAX_DATA_LEN) {
+    if (size > ESPNOW_MAX_DATA_LEN) {
      this->size_ = 0;
      return;
    }
@@ -42,8 +42,8 @@ void ESPNowTransport::send_packet(const std::vector<uint8_t> &buf) const {
    return;
  }

-  if (buf.size() > ESP_NOW_MAX_DATA_LEN) {
-    ESP_LOGE(TAG, "Packet too large: %zu bytes (max %d)", buf.size(), ESP_NOW_MAX_DATA_LEN);
+  if (buf.size() > ESPNOW_MAX_DATA_LEN) {
+    ESP_LOGE(TAG, "Packet too large: %zu bytes (max %u)", buf.size(), (unsigned) ESPNOW_MAX_DATA_LEN);
    return;
  }

@@ -55,8 +55,8 @@ void ESPNowTransport::send_packet(const std::vector<uint8_t> &buf) const {
  });
 }

-bool ESPNowTransport::on_receive(const ESPNowRecvInfo &info, const uint8_t *data, uint8_t size) {
-  ESP_LOGV(TAG, "Received packet of size %u from %02X:%02X:%02X:%02X:%02X:%02X", size, info.src_addr[0],
+bool ESPNowTransport::on_receive(const ESPNowRecvInfo &info, const uint8_t *data, uint16_t size) {
+  ESP_LOGV(TAG, "Received packet of size %u from %02X:%02X:%02X:%02X:%02X:%02X", (unsigned) size, info.src_addr[0],
           info.src_addr[1], info.src_addr[2], info.src_addr[3], info.src_addr[4], info.src_addr[5]);

  if (data == nullptr || size == 0) {
@@ -70,9 +70,9 @@ bool ESPNowTransport::on_receive(const ESPNowRecvInfo &info, const uint8_t *data
  return false;  // Allow other handlers to run
 }

-bool ESPNowTransport::on_broadcast(const ESPNowRecvInfo &info, const uint8_t *data, uint8_t size) {
-  ESP_LOGV(TAG, "Received broadcast packet of size %u from %02X:%02X:%02X:%02X:%02X:%02X", size, info.src_addr[0],
-           info.src_addr[1], info.src_addr[2], info.src_addr[3], info.src_addr[4], info.src_addr[5]);
+bool ESPNowTransport::on_broadcast(const ESPNowRecvInfo &info, const uint8_t *data, uint16_t size) {
+  ESP_LOGV(TAG, "Received broadcast packet of size %u from %02X:%02X:%02X:%02X:%02X:%02X", (unsigned) size,
+           info.src_addr[0], info.src_addr[1], info.src_addr[2], info.src_addr[3], info.src_addr[4], info.src_addr[5]);

  if (data == nullptr || size == 0) {
    ESP_LOGW(TAG, "Received empty or null broadcast packet");
@@ -24,12 +24,12 @@ class ESPNowTransport final : public packet_transport::PacketTransport,
  }

  // ESPNow handler interface
-  bool on_receive(const ESPNowRecvInfo &info, const uint8_t *data, uint8_t size) override;
-  bool on_broadcast(const ESPNowRecvInfo &info, const uint8_t *data, uint8_t size) override;
+  bool on_receive(const ESPNowRecvInfo &info, const uint8_t *data, uint16_t size) override;
+  bool on_broadcast(const ESPNowRecvInfo &info, const uint8_t *data, uint16_t size) override;

 protected:
  void send_packet(const std::vector<uint8_t> &buf) const override;
-  size_t get_max_packet_size() override { return ESP_NOW_MAX_DATA_LEN; }
+  size_t get_max_packet_size() override { return ESPNOW_MAX_DATA_LEN; }
  bool should_send() override;

  peer_address_t peer_address_{{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}};
@@ -179,9 +179,11 @@ _ALWAYS_EXTERNAL_IDF_COMPONENTS = {"LAN8670", "ENC28J60"}

 # ESP32-only SPI ethernet types (W5100 is RP2040-only, no ESP-IDF driver)
 SPI_ETHERNET_TYPES = {"W5500", "DM9051", "ENC28J60"}
-# RP2040-supported ethernet types (SPI and PIO QSPI)
-RP2040_ETHERNET_TYPES = {"W5100", "W5500", "W6100", "W6300", "ENC28J60"}
-_RP2040_SPI_LIBRARIES = {
+# RP2-supported ethernet types (SPI and PIO QSPI). Applies to the whole
+# RP2 family (RP2040 and RP2350); the chip-specific W5100 caveat in the
+# comment above is about ESP-IDF driver coverage, not the RP2 platform.
+RP2_ETHERNET_TYPES = {"W5100", "W5500", "W6100", "W6300", "ENC28J60"}
+_RP2_SPI_LIBRARIES = {
    "W5100": "lwIP_w5100",
    "W5500": "lwIP_w5500",
    "ENC28J60": "lwIP_enc28j60",
@@ -361,10 +363,10 @@ def _validate(config):
                    f"{config[CONF_TYPE]} PHY requires RMII interface and is only supported "
                    f"on ESP32 classic and ESP32-P4, not {variant}"
                )
-    elif CORE.is_rp2040 and config[CONF_TYPE] not in RP2040_ETHERNET_TYPES:
+    elif CORE.is_rp2 and config[CONF_TYPE] not in RP2_ETHERNET_TYPES:
        raise cv.Invalid(
-            f"Only {', '.join(sorted(RP2040_ETHERNET_TYPES))} are supported on RP2040, "
-            f"not {config[CONF_TYPE]}"
+            f"Only {', '.join(sorted(RP2_ETHERNET_TYPES))} are supported on the RP2 "
+            f"platform, not {config[CONF_TYPE]}"
        )
    return config

@@ -459,7 +461,7 @@ SPI_SCHEMA = cv.All(
            }
        ),
    ),
-    cv.only_on([Platform.ESP32, Platform.RP2040]),
+    cv.only_on([Platform.ESP32, Platform.RP2]),
    _validate_spi_interface,
 )

@@ -473,13 +475,13 @@ CONFIG_SCHEMA = cv.All(
            "JL1101": RMII_SCHEMA,
            "KSZ8081": RMII_SCHEMA,
            "KSZ8081RNA": RMII_SCHEMA,
-            "W5100": cv.All(SPI_SCHEMA, cv.only_on([Platform.RP2040])),
+            "W5100": cv.All(SPI_SCHEMA, cv.only_on([Platform.RP2])),
            "W5500": SPI_SCHEMA,
            "OPENETH": cv.All(BASE_SCHEMA, cv.only_on([Platform.ESP32])),
            "DM9051": SPI_SCHEMA,
            "ENC28J60": SPI_SCHEMA,
-            "W6100": cv.All(SPI_SCHEMA, cv.only_on([Platform.RP2040])),
-            "W6300": cv.All(SPI_SCHEMA, cv.only_on([Platform.RP2040])),
+            "W6100": cv.All(SPI_SCHEMA, cv.only_on([Platform.RP2])),
+            "W6300": cv.All(SPI_SCHEMA, cv.only_on([Platform.RP2])),
            "LAN8670": RMII_SCHEMA,
            "GENERIC": GENERIC_SCHEMA,
            "YT8531": GENERIC_SCHEMA,
@@ -537,7 +539,7 @@ async def to_code(config):

    if CORE.is_esp32:
        await _to_code_esp32(var, config)
-    elif CORE.is_rp2040:
+    elif CORE.is_rp2:
        await _to_code_rp2040(var, config)

    cg.add(var.set_type(ETHERNET_TYPES[config[CONF_TYPE]]))
@@ -670,7 +672,7 @@ async def _to_code_rp2040(var: cg.Pvariable, config: ConfigType) -> None:
        cg.add(var.set_reset_pin(config[CONF_RESET_PIN]))

    cg.add_define("USE_ETHERNET_SPI")
-    cg.add_library(_RP2040_SPI_LIBRARIES[config[CONF_TYPE]], None)
+    cg.add_library(_RP2_SPI_LIBRARIES[config[CONF_TYPE]], None)


 def _final_validate_rmii_pins(config: ConfigType) -> None:
@@ -752,7 +754,7 @@ _platform_filter = filter_source_files_from_platform(
            PlatformFramework.ESP32_IDF,
            PlatformFramework.ESP32_ARDUINO,
        },
-        "ethernet_component_rp2040.cpp": {PlatformFramework.RP2040_ARDUINO},
+        "ethernet_component_rp2.cpp": {PlatformFramework.RP2_ARDUINO},
        "esp_eth_phy_jl1101.c": {
            PlatformFramework.ESP32_IDF,
            PlatformFramework.ESP32_ARDUINO,
@@ -25,7 +25,7 @@ extern "C" eth_esp32_emac_config_t eth_esp32_emac_default_config(void);
 #endif
 #endif  // USE_ESP32

-#ifdef USE_RP2040
+#ifdef USE_RP2
 #if defined(USE_ETHERNET_W5500)
 #include <W5500lwIP.h>
 #elif defined(USE_ETHERNET_W5100)
@@ -182,14 +182,14 @@ class EthernetComponent final : public Component {
 #endif  // USE_ETHERNET_SPI
 #endif  // USE_ESP32

-#ifdef USE_RP2040
+#ifdef USE_RP2
  void set_clk_pin(uint8_t clk_pin);
  void set_miso_pin(uint8_t miso_pin);
  void set_mosi_pin(uint8_t mosi_pin);
  void set_cs_pin(uint8_t cs_pin);
  void set_interrupt_pin(int8_t interrupt_pin);
  void set_reset_pin(int8_t reset_pin);
-#endif  // USE_RP2040
+#endif  // USE_RP2

 #ifdef USE_ETHERNET_IP_STATE_LISTENERS
  void add_ip_state_listener(EthernetIPStateListener *listener) { this->ip_state_listeners_.push_back(listener); }
@@ -272,7 +272,7 @@ class EthernetComponent final : public Component {
  esp_eth_phy_t *phy_{nullptr};
 #endif  // USE_ESP32

-#ifdef USE_RP2040
+#ifdef USE_RP2
  static constexpr uint32_t LINK_CHECK_INTERVAL = 500;  // ms between link/IP polls
 #if defined(USE_ETHERNET_W5100)
  static constexpr uint32_t RESET_DELAY_MS = 150;  // W5100S PLL lock time
@@ -301,7 +301,7 @@ class EthernetComponent final : public Component {
  uint8_t cs_pin_;
  int8_t interrupt_pin_{-1};
  int8_t reset_pin_{-1};
-#endif  // USE_RP2040
+#endif  // USE_RP2

  // Common members
 #ifdef USE_ETHERNET_MANUAL_IP
@@ -1,12 +1,12 @@
 #include "ethernet_component.h"

-#if defined(USE_ETHERNET) && defined(USE_RP2040)
+#if defined(USE_ETHERNET) && defined(USE_RP2)

 #include "esphome/core/application.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"

-#include "esphome/components/rp2040/gpio.h"
+#include "esphome/components/rp2/gpio.h"

 #include <SPI.h>
 #include <lwip/dns.h>
@@ -29,7 +29,7 @@ void EthernetComponent::setup() {

  // Toggle reset pin if configured
  if (this->reset_pin_ >= 0) {
-    rp2040::RP2040GPIOPin reset_pin;
+    rp2::RP2GPIOPin reset_pin;
    reset_pin.set_pin(this->reset_pin_);
    reset_pin.set_flags(gpio::FLAG_OUTPUT);
    reset_pin.setup();
@@ -380,4 +380,4 @@ void EthernetComponent::disable() {

 }  // namespace esphome::ethernet

-#endif  // USE_ETHERNET && USE_RP2040
+#endif  // USE_ETHERNET && USE_RP2
@@ -7,7 +7,7 @@

 #include <cinttypes>

-#if !defined(USE_RP2040) && !defined(USE_HOST)
+#if !defined(USE_RP2) && !defined(USE_HOST)

 namespace esphome::factory_reset {

@@ -73,4 +73,4 @@ void FactoryResetComponent::setup() {

 }  // namespace esphome::factory_reset

-#endif  // !defined(USE_RP2040) && !defined(USE_HOST)
+#endif  // !defined(USE_RP2) && !defined(USE_HOST)
@@ -3,7 +3,7 @@
 #include "esphome/core/component.h"
 #include "esphome/core/automation.h"
 #include "esphome/core/preferences.h"
-#if !defined(USE_RP2040) && !defined(USE_HOST)
+#if !defined(USE_RP2) && !defined(USE_HOST)

 #ifdef USE_ESP32
 #include <esp_system.h>
@@ -32,4 +32,4 @@ class FactoryResetComponent final : public Component {

 }  // namespace esphome::factory_reset

-#endif  // !defined(USE_RP2040) && !defined(USE_HOST)
+#endif  // !defined(USE_RP2) && !defined(USE_HOST)
@@ -47,7 +47,7 @@ CONFIG_SCHEMA = (
                host=True,
                ln882x=False,
                nrf52=True,
-                rp2040=True,
+                rp2=True,
                rtl87xx=False,
            ): cv.boolean,
            cv.Optional(CONF_INTERRUPT_TYPE, default="ANY"): cv.enum(
@@ -1,6 +1,6 @@
 #include <cstring>
 #include "hmac_sha256.h"
-#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2040) || defined(USE_LIBRETINY) || defined(USE_HOST)
+#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2) || defined(USE_LIBRETINY) || defined(USE_HOST)
 #include "esphome/core/helpers.h"

 namespace esphome::hmac_sha256 {
@@ -1,7 +1,7 @@
 #pragma once

 #include "esphome/core/defines.h"
-#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2040) || defined(USE_LIBRETINY) || defined(USE_HOST)
+#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2) || defined(USE_LIBRETINY) || defined(USE_HOST)

 #include <string>

@@ -73,7 +73,7 @@ def validate_url(value):
 def validate_ssl_verification(config):
    error_message = ""

-    if CORE.is_rp2040 and config[CONF_VERIFY_SSL]:
+    if CORE.is_rp2 and config[CONF_VERIFY_SSL]:
        error_message = "ESPHome does not support certificate verification on RP2040"

    if (
@@ -96,7 +96,7 @@ def _declare_request_class(value):
        return cv.declare_id(HttpRequestHost)(value)
    if CORE.is_esp32:
        return cv.declare_id(HttpRequestIDF)(value)
-    if CORE.is_esp8266 or CORE.is_rp2040:
+    if CORE.is_esp8266 or CORE.is_rp2:
        return cv.declare_id(HttpRequestArduino)(value)
    return NotImplementedError

@@ -118,7 +118,7 @@ CONFIG_SCHEMA = cv.All(
            ),
            cv.Optional(CONF_VERIFY_SSL, default=True): cv.boolean,
            cv.Optional(CONF_WATCHDOG_TIMEOUT): cv.All(
-                cv.Any(cv.only_on_esp32, cv.only_on_rp2040),
+                cv.Any(cv.only_on_esp32, cv.only_on_rp2),
                cv.positive_not_null_time_period,
                cv.positive_time_period_milliseconds,
            ),
@@ -144,7 +144,7 @@ CONFIG_SCHEMA = cv.All(
        esp8266_arduino=cv.Version(2, 5, 1),
        esp32_arduino=cv.Version(0, 0, 0),
        esp_idf=cv.Version(0, 0, 0),
-        rp2040_arduino=cv.Version(0, 0, 0),
+        rp2_arduino=cv.Version(0, 0, 0),
        host=cv.Version(0, 0, 0),
    ),
    validate_ssl_verification,
@@ -204,7 +204,7 @@ async def to_code(config):
        )
    if CORE.is_esp8266:
        cg.add_library("ESP8266HTTPClient", None)
-    if CORE.is_rp2040 and CORE.using_arduino:
+    if CORE.is_rp2 and CORE.using_arduino:
        cg.add_library("HTTPClient", None)
    if CORE.is_host:
        if IS_MACOS:
@@ -368,7 +368,7 @@ FILTER_SOURCE_FILES = filter_source_files_from_platform(
        "http_request_host.cpp": {PlatformFramework.HOST_NATIVE},
        "http_request_arduino.cpp": {
            PlatformFramework.ESP8266_ARDUINO,
-            PlatformFramework.RP2040_ARDUINO,
+            PlatformFramework.RP2_ARDUINO,
            PlatformFramework.BK72XX_ARDUINO,
            PlatformFramework.RTL87XX_ARDUINO,
            PlatformFramework.LN882X_ARDUINO,
@@ -72,7 +72,7 @@ std::shared_ptr<HttpContainer> HttpRequestArduino::perform(const std::string &ur

  bool status = container->client_.begin(*stream_ptr, url.c_str());

-#elif defined(USE_RP2040)
+#elif defined(USE_RP2)
  if (secure) {
    container->client_.setInsecure();
  }
@@ -4,7 +4,7 @@

 #if defined(USE_ARDUINO) && !defined(USE_ESP32)

-#if defined(USE_RP2040)
+#if defined(USE_RP2)
 #include <HTTPClient.h>
 #include <WiFiClient.h>
 #endif
@@ -36,7 +36,7 @@ CONFIG_SCHEMA = cv.All(
        esp8266_arduino=cv.Version(2, 5, 1),
        esp32_arduino=cv.Version(0, 0, 0),
        esp_idf=cv.Version(0, 0, 0),
-        rp2040_arduino=cv.Version(0, 0, 0),
+        rp2_arduino=cv.Version(0, 0, 0),
    ),
 )

@@ -49,7 +49,7 @@ from esphome.const import (
    PLATFORM_ESP8266,
    PLATFORM_HOST,
    PLATFORM_NRF52,
-    PLATFORM_RP2040,
+    PLATFORM_RP2,
    PlatformFramework,
 )
 from esphome.core import CORE, CoroPriority, coroutine_with_priority
@@ -130,7 +130,7 @@ def validate_config(config):
        return cv.require_framework_version(
            esp_idf=cv.Version(5, 4, 2), esp32_arduino=cv.Version(3, 2, 1)
        )(config)
-    if CORE.is_rp2040:
+    if CORE.is_rp2:
        sda_controller = _rp2040_i2c_controller(config[CONF_SDA])
        scl_controller = _rp2040_i2c_controller(config[CONF_SCL])
        if sda_controller != scl_controller:
@@ -171,7 +171,7 @@ CONFIG_SCHEMA = cv.All(
                CONF_SDA,
                esp32="SDA",
                esp8266="SDA",
-                rp2040="SDA",
+                rp2="SDA",
                nrf52="SDA",
            ): pins.internal_gpio_pin_number,
            cv.SplitDefault(CONF_SDA_PULLUP_ENABLED, esp32=True): cv.All(
@@ -181,7 +181,7 @@ CONFIG_SCHEMA = cv.All(
                CONF_SCL,
                esp32="SCL",
                esp8266="SCL",
-                rp2040="SCL",
+                rp2="SCL",
                nrf52="SCL",
            ): pins.internal_gpio_pin_number,
            cv.SplitDefault(CONF_SCL_PULLUP_ENABLED, esp32=True): cv.All(
@@ -191,7 +191,7 @@ CONFIG_SCHEMA = cv.All(
                CONF_FREQUENCY,
                esp32="50kHz",
                esp8266="50kHz",
-                rp2040="50kHz",
+                rp2="50kHz",
                nrf52="100kHz",
                host="50kHz",
            ): cv.All(
@@ -219,7 +219,7 @@ CONFIG_SCHEMA = cv.All(
        [
            PLATFORM_ESP32,
            PLATFORM_ESP8266,
-            PLATFORM_RP2040,
+            PLATFORM_RP2,
            PLATFORM_NRF52,
            PLATFORM_HOST,
        ]
@@ -233,7 +233,7 @@ def _final_validate(config):
    full_config = fv.full_config.get()[CONF_I2C]
    if CORE.using_zephyr and len(full_config) > 1:
        raise cv.Invalid("Second i2c is not implemented on Zephyr yet")
-    if CORE.is_rp2040:
+    if CORE.is_rp2:
        if len(full_config) > 2:
            raise cv.Invalid(
                "The maximum number of I2C interfaces for RP2040/RP2350 is 2"
@@ -443,7 +443,7 @@ FILTER_SOURCE_FILES = filter_source_files_from_platform(
    {
        "i2c_bus_arduino.cpp": {
            PlatformFramework.ESP8266_ARDUINO,
-            PlatformFramework.RP2040_ARDUINO,
+            PlatformFramework.RP2_ARDUINO,
            PlatformFramework.BK72XX_ARDUINO,
            PlatformFramework.RTL87XX_ARDUINO,
            PlatformFramework.LN882X_ARDUINO,
@@ -19,7 +19,7 @@ void ArduinoI2CBus::setup() {

 #if defined(USE_ESP8266)
  wire_ = new TwoWire();  // NOLINT(cppcoreguidelines-owning-memory)
-#elif defined(USE_RP2040)
+#elif defined(USE_RP2)
  // Select Wire instance based on pin assignment, not definition order.
  // I2C controller = (gpio / 2) % 2: even pairs (0-1,4-5,...) → I2C0, odd pairs (2-3,6-7,...) → I2C1
  // RP2040 datasheet Table 2 (section 1.4.3): https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf
@@ -41,7 +41,7 @@ void ArduinoI2CBus::setup() {
 }

 void ArduinoI2CBus::set_pins_and_clock_() {
-#ifdef USE_RP2040
+#ifdef USE_RP2
  wire_->setSDA(this->sda_pin_);
  wire_->setSCL(this->scl_pin_);
  wire_->begin();
@@ -52,7 +52,7 @@ void ArduinoI2CBus::set_pins_and_clock_() {
 #if defined(USE_ESP8266)
    // https://github.com/esp8266/Arduino/blob/master/libraries/Wire/Wire.h
    wire_->setClockStretchLimit(timeout_);  // unit: us
-#elif defined(USE_RP2040)
+#elif defined(USE_RP2)
    // https://github.com/earlephilhower/ArduinoCore-API/blob/e37df85425e0ac020bfad226d927f9b00d2e0fb7/api/Stream.h
    wire_->setTimeout(timeout_ / 1000);  // unit: ms
 #endif
@@ -70,7 +70,7 @@ void ArduinoI2CBus::dump_config() {
  if (timeout_ > 0) {
 #if defined(USE_ESP8266)
    ESP_LOGCONFIG(TAG, "  Timeout: %u us", this->timeout_);
-#elif defined(USE_RP2040)
+#elif defined(USE_RP2)
    ESP_LOGCONFIG(TAG, "  Timeout: %u ms", this->timeout_ / 1000);
 #endif
  }
@@ -1,4 +1,4 @@
-#ifdef USE_RP2040
+#ifdef USE_RP2

 #include "esphome/core/log.h"
 #include "internal_temperature.h"
@@ -7,7 +7,7 @@

 namespace esphome::internal_temperature {

-static const char *const TAG = "internal_temperature.rp2040";
+static const char *const TAG = "internal_temperature.rp2";

 void InternalTemperatureSensor::update() {
  float temperature = NAN;
@@ -28,4 +28,4 @@ void InternalTemperatureSensor::update() {

 }  // namespace esphome::internal_temperature

-#endif  // USE_RP2040
+#endif  // USE_RP2
@@ -10,7 +10,7 @@ from esphome.const import (
    PLATFORM_ESP32,
    PLATFORM_LN882X,
    PLATFORM_NRF52,
-    PLATFORM_RP2040,
+    PLATFORM_RP2,
    STATE_CLASS_MEASUREMENT,
    UNIT_CELSIUS,
    PlatformFramework,
@@ -34,7 +34,7 @@ CONFIG_SCHEMA = cv.All(
    cv.only_on(
        [
            PLATFORM_ESP32,
-            PLATFORM_RP2040,
+            PLATFORM_RP2,
            PLATFORM_BK72XX,
            PLATFORM_NRF52,
            PLATFORM_LN882X,
@@ -58,7 +58,7 @@ FILTER_SOURCE_FILES = filter_source_files_from_platform(
            PlatformFramework.ESP32_ARDUINO,
            PlatformFramework.ESP32_IDF,
        },
-        "internal_temperature_rp2040.cpp": {PlatformFramework.RP2040_ARDUINO},
+        "internal_temperature_rp2.cpp": {PlatformFramework.RP2_ARDUINO},
        "internal_temperature_bk72xx.cpp": {
            PlatformFramework.BK72XX_ARDUINO,
        },
@@ -5,7 +5,7 @@

 namespace esphome::libretiny {

-static const char *const TAG = "lt.gpio";
+static const char *const TAG = "libretiny.gpio";

 static int IRAM_ATTR flags_to_mode(gpio::Flags flags) {
  if (flags == gpio::FLAG_INPUT) {
@@ -6,7 +6,7 @@

 namespace esphome::libretiny {

-static const char *const TAG = "lt.component";
+static const char *const TAG = "libretiny";

 void LTComponent::dump_config() {
  ESP_LOGCONFIG(TAG,
@@ -54,7 +54,7 @@ from esphome.const import (
    PLATFORM_ESP8266,
    PLATFORM_LN882X,
    PLATFORM_NRF52,
-    PLATFORM_RP2040,
+    PLATFORM_RP2,
    PLATFORM_RTL87XX,
    PlatformFramework,
 )
@@ -154,7 +154,7 @@ HARDWARE_UART_TO_SERIAL = {
        UART2: cg.global_ns.Serial2,
        DEFAULT: cg.global_ns.Serial,
    },
-    PLATFORM_RP2040: {
+    PLATFORM_RP2: {
        UART0: cg.global_ns.Serial1,
        UART1: cg.global_ns.Serial2,
        USB_CDC: cg.global_ns.Serial,
@@ -171,7 +171,7 @@ def uart_selection(value):
            return cv.one_of(*UART_SELECTION_ESP32[variant], upper=True)(value)
    if CORE.is_esp8266:
        return cv.one_of(*UART_SELECTION_ESP8266, upper=True)(value)
-    if CORE.is_rp2040:
+    if CORE.is_rp2:
        return cv.one_of(*UART_SELECTION_RP2040, upper=True)(value)
    if CORE.is_libretiny:
        family = get_libretiny_family()
@@ -282,7 +282,7 @@ CONFIG_SCHEMA = cv.All(
                esp32_s2=USB_CDC,
                esp32_s3=USB_SERIAL_JTAG,
                esp32_s31=USB_SERIAL_JTAG,
-                rp2040=USB_CDC,
+                rp2=USB_CDC,
                bk72xx=DEFAULT,
                ln882x=DEFAULT,
                rtl87xx=DEFAULT,
@@ -292,7 +292,7 @@ CONFIG_SCHEMA = cv.All(
                    [
                        PLATFORM_ESP8266,
                        PLATFORM_ESP32,
-                        PLATFORM_RP2040,
+                        PLATFORM_RP2,
                        PLATFORM_BK72XX,
                        PLATFORM_LN882X,
                        PLATFORM_RTL87XX,
@@ -417,11 +417,7 @@ async def _late_logger_init(config: ConfigType) -> None:
            cg.add_define("USE_ESP8266_LOGGER_SERIAL1")
            enable_serial1()

-    if (
-        (CORE.is_esp8266 or CORE.is_rp2040)
-        and has_serial_logging
-        and is_at_least_verbose
-    ):
+    if (CORE.is_esp8266 or CORE.is_rp2) and has_serial_logging and is_at_least_verbose:
        debug_serial_port = HARDWARE_UART_TO_SERIAL[CORE.target_platform][
            config.get(CONF_HARDWARE_UART)
        ]
@@ -605,7 +601,7 @@ FILTER_SOURCE_FILES = filter_source_files_from_platform(
        },
        "logger_esp8266.cpp": {PlatformFramework.ESP8266_ARDUINO},
        "logger_host.cpp": {PlatformFramework.HOST_NATIVE},
-        "logger_rp2040.cpp": {PlatformFramework.RP2040_ARDUINO},
+        "logger_rp2.cpp": {PlatformFramework.RP2_ARDUINO},
        "logger_libretiny.cpp": {
            PlatformFramework.BK72XX_ARDUINO,
            PlatformFramework.RTL87XX_ARDUINO,
@@ -206,7 +206,7 @@ void Logger::set_baud_rate(uint32_t baud_rate) { this->baud_rate_ = baud_rate; }
 void Logger::set_log_level(const char *tag, uint8_t log_level) { this->log_levels_[tag] = log_level; }
 #endif

-#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2040) || defined(USE_LIBRETINY) || defined(USE_ZEPHYR)
+#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2) || defined(USE_LIBRETINY) || defined(USE_ZEPHYR)
 UARTSelection Logger::get_uart() const { return this->uart_; }
 #endif

@@ -23,10 +23,10 @@
 #if defined(USE_ESP8266)
 #include <HardwareSerial.h>
 #endif  // USE_ESP8266
-#ifdef USE_RP2040
+#ifdef USE_RP2
 #include <HardwareSerial.h>
 #include <SerialUSB.h>
-#endif  // USE_RP2040
+#endif  // USE_RP2
 #endif  // USE_ARDUINO

 #ifdef USE_ESP32
@@ -96,7 +96,7 @@ struct CStrCompare {
 // macOS allows up to 64 bytes, Linux up to 16
 static constexpr size_t THREAD_NAME_BUF_SIZE = 64;

-#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2040) || defined(USE_LIBRETINY) || defined(USE_ZEPHYR)
+#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2) || defined(USE_LIBRETINY) || defined(USE_ZEPHYR)
 /** Enum for logging UART selection
 *
 * Advanced configuration (pin selection, etc) is not supported.
@@ -122,7 +122,7 @@ enum UARTSelection : uint8_t {
  UART_SELECTION_UART0_SWAP,
 #endif  // USE_ESP8266
 };
-#endif  // USE_ESP32 || USE_ESP8266 || USE_RP2040 || USE_LIBRETINY || USE_ZEPHYR
+#endif  // USE_ESP32 || USE_ESP8266 || USE_RP2 || USE_LIBRETINY || USE_ZEPHYR

 /**
 * @brief Logger component for all ESPHome logging.
@@ -160,7 +160,7 @@ class Logger final : public Component {
 #ifdef USE_HOST
  void create_pthread_key() { pthread_key_create(&log_recursion_key_, nullptr); }
 #endif
-#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2040) || defined(USE_LIBRETINY) || defined(USE_ZEPHYR)
+#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2) || defined(USE_LIBRETINY) || defined(USE_ZEPHYR)
  void set_uart_selection(UARTSelection uart_selection) { uart_ = uart_selection; }
  /// Get the UART used by the logger.
  UARTSelection get_uart() const;
@@ -351,7 +351,7 @@ class Logger final : public Component {
 #endif
  // Group smaller types together at the end
  uint8_t current_level_{ESPHOME_LOG_LEVEL_VERY_VERBOSE};
-#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2040) || defined(USE_ZEPHYR)
+#if defined(USE_ESP32) || defined(USE_ESP8266) || defined(USE_RP2) || defined(USE_ZEPHYR)
  UARTSelection uart_{UART_SELECTION_UART0};
 #endif
 #ifdef USE_LIBRETINY
@@ -505,8 +505,8 @@ class LoggerMessageTrigger final : public Trigger<uint8_t, const char *, const c
 #include "logger_esp32.h"
 #elif defined(USE_ESP8266)
 #include "logger_esp8266.h"
-#elif defined(USE_RP2040)
-#include "logger_rp2040.h"
+#elif defined(USE_RP2)
+#include "logger_rp2.h"
 #elif defined(USE_LIBRETINY)
 #include "logger_libretiny.h"
 #endif
@@ -1,8 +1,8 @@
-#ifdef USE_RP2040
+#ifdef USE_RP2
 #include "logger.h"
 #include "esphome/core/defines.h"
-#ifdef USE_RP2040_CRASH_HANDLER
-#include "esphome/components/rp2040/crash_handler.h"
+#ifdef USE_RP2_CRASH_HANDLER
+#include "esphome/components/rp2/crash_handler.h"
 #endif
 #include "esphome/core/log.h"

@@ -29,8 +29,8 @@ void Logger::pre_setup() {
  }
  global_logger = this;
  ESP_LOGI(TAG, "Log initialized");
-#ifdef USE_RP2040_CRASH_HANDLER
-  rp2040::crash_handler_log();
+#ifdef USE_RP2_CRASH_HANDLER
+  rp2::crash_handler_log();
 #endif
 }

@@ -50,4 +50,4 @@ const LogString *Logger::get_uart_selection_() {
 }

 }  // namespace esphome::logger
-#endif  // USE_RP2040
+#endif  // USE_RP2
@@ -1,6 +1,6 @@
 #pragma once

-#ifdef USE_RP2040
+#ifdef USE_RP2
 #include "esphome/core/helpers.h"

 namespace esphome::logger {
@@ -929,7 +929,7 @@ void lv_mem_init() {}

 void lv_mem_deinit() {}

-#if defined(USE_HOST) || defined(USE_RP2040) || defined(USE_ESP8266)
+#if defined(USE_HOST) || defined(USE_RP2) || defined(USE_ESP8266)
 void *lv_malloc_core(size_t size) {
  auto *ptr = malloc(size);  // NOLINT
  if (ptr == nullptr) {
@@ -5,7 +5,7 @@

 namespace esphome::md5 {

-#if defined(USE_ARDUINO) && !defined(USE_RP2040) && !defined(USE_ESP32)
+#if defined(USE_ARDUINO) && !defined(USE_RP2) && !defined(USE_ESP32)
 void MD5Digest::init() {
  memset(this->digest_, 0, 16);
  MD5Init(&this->ctx_);
@@ -14,7 +14,7 @@ void MD5Digest::init() {
 void MD5Digest::add(const uint8_t *data, size_t len) { MD5Update(&this->ctx_, data, len); }

 void MD5Digest::calculate() { MD5Final(this->digest_, &this->ctx_); }
-#endif  // USE_ARDUINO && !USE_RP2040
+#endif  // USE_ARDUINO && !USE_RP2

 #ifdef USE_ESP32
 void MD5Digest::init() {
@@ -27,7 +27,7 @@ void MD5Digest::add(const uint8_t *data, size_t len) { esp_rom_md5_update(&this-
 void MD5Digest::calculate() { esp_rom_md5_final(this->digest_, &this->ctx_); }
 #endif  // USE_ESP32

-#ifdef USE_RP2040
+#ifdef USE_RP2
 void MD5Digest::init() {
  memset(this->digest_, 0, 16);
  br_md5_init(&this->ctx_);
@@ -36,7 +36,7 @@ void MD5Digest::init() {
 void MD5Digest::add(const uint8_t *data, size_t len) { br_md5_update(&this->ctx_, data, len); }

 void MD5Digest::calculate() { br_md5_out(&this->ctx_, this->digest_); }
-#endif  // USE_RP2040
+#endif  // USE_RP2

 #ifdef USE_HOST
 MD5Digest::~MD5Digest() {
@@ -19,7 +19,7 @@
 #define MD5_CTX_TYPE md5_context_t
 #endif

-#ifdef USE_RP2040
+#ifdef USE_RP2
 #include <MD5Builder.h>
 #define MD5_CTX_TYPE br_md5_context
 #endif
@@ -70,11 +70,11 @@ def _require_network_interface(config: ConfigType) -> ConfigType:
    window. Reject at config time rather than silently producing a component
    that never initializes.
    """
-    if config.get(CONF_DISABLED) or not (CORE.is_esp8266 or CORE.is_rp2040):
+    if config.get(CONF_DISABLED) or not (CORE.is_esp8266 or CORE.is_rp2):
        return config
    full_config = fv.full_config.get()
    has_wifi = "wifi" in full_config
-    has_ethernet = CORE.is_rp2040 and "ethernet" in full_config
+    has_ethernet = CORE.is_rp2 and "ethernet" in full_config
    if not (has_wifi or has_ethernet):
        options = "'wifi'" if CORE.is_esp8266 else "'wifi' or 'ethernet'"
        raise cv.Invalid(
@@ -192,18 +192,18 @@ async def to_code(config):
    if CORE.using_arduino:
        if CORE.is_esp8266:
            cg.add_library("ESP8266mDNS", None)
-        elif CORE.is_rp2040:
+        elif CORE.is_rp2:
            cg.add_library("LEAmDNS", None)

        # Subscribe to the network IP state listener(s) so MDNS.update() is only
        # scheduled during the probe+announce phase. Same on_ip_state() override
        # serves both WiFi and Ethernet (signatures match).
-        if CORE.is_esp8266 or CORE.is_rp2040:
+        if CORE.is_esp8266 or CORE.is_rp2:
            if "wifi" in CORE.config:
                from esphome.components import wifi

                wifi.request_wifi_ip_state_listener()
-            if CORE.is_rp2040 and "ethernet" in CORE.config:
+            if CORE.is_rp2 and "ethernet" in CORE.config:
                from esphome.components import ethernet

                ethernet.request_ethernet_ip_state_listener()
@@ -274,7 +274,7 @@ FILTER_SOURCE_FILES = filter_source_files_from_platform(
        },
        "mdns_esp8266.cpp": {PlatformFramework.ESP8266_ARDUINO},
        "mdns_host.cpp": {PlatformFramework.HOST_NATIVE},
-        "mdns_rp2040.cpp": {PlatformFramework.RP2040_ARDUINO},
+        "mdns_rp2.cpp": {PlatformFramework.RP2_ARDUINO},
        "mdns_libretiny.cpp": {
            PlatformFramework.BK72XX_ARDUINO,
            PlatformFramework.RTL87XX_ARDUINO,
@@ -100,7 +100,7 @@ void MDNSComponent::compile_records_(StaticVector<MDNSService, MDNS_SERVICE_COUN
    if (!friendly_name_empty) {
      txt_count++;  // friendly_name
    }
-#if defined(USE_ESP8266) || defined(USE_ESP32) || defined(USE_RP2040) || defined(USE_LIBRETINY) || defined(USE_NRF52)
+#if defined(USE_ESP8266) || defined(USE_ESP32) || defined(USE_RP2) || defined(USE_LIBRETINY) || defined(USE_NRF52)
    txt_count++;  // platform
 #endif
 #if defined(USE_WIFI) || defined(USE_ETHERNET) || defined(USE_OPENTHREAD)
@@ -136,9 +136,9 @@ void MDNSComponent::compile_records_(StaticVector<MDNSService, MDNS_SERVICE_COUN
 #elif defined(USE_ESP32)
    MDNS_STATIC_CONST_CHAR(PLATFORM_ESP32, "ESP32");
    txt_records.push_back({MDNS_STR(TXT_PLATFORM), MDNS_STR(PLATFORM_ESP32)});
-#elif defined(USE_RP2040)
-    MDNS_STATIC_CONST_CHAR(PLATFORM_RP2040, "RP2040");
-    txt_records.push_back({MDNS_STR(TXT_PLATFORM), MDNS_STR(PLATFORM_RP2040)});
+#elif defined(USE_RP2)
+    MDNS_STATIC_CONST_CHAR(PLATFORM_RP2, "RP2");
+    txt_records.push_back({MDNS_STR(TXT_PLATFORM), MDNS_STR(PLATFORM_RP2)});
 #elif defined(USE_LIBRETINY)
    txt_records.push_back({MDNS_STR(TXT_PLATFORM), MDNS_STR(lt_cpu_get_model_name())});
 #elif defined(USE_NRF52)
@@ -7,7 +7,7 @@
 #include "esphome/core/helpers.h"
 // On ESP8266 and RP2040 the scheduler-backed MDNS.update() polling window is armed by
 // IP state listener events on whichever network interface is configured.
-#if (defined(USE_ESP8266) || defined(USE_RP2040)) && \
+#if (defined(USE_ESP8266) || defined(USE_RP2)) && \
    ((defined(USE_WIFI) && defined(USE_WIFI_IP_STATE_LISTENERS)) || \
     (defined(USE_ETHERNET) && defined(USE_ETHERNET_IP_STATE_LISTENERS)))
 #include "esphome/components/network/ip_address.h"
@@ -145,7 +145,7 @@ class MDNSComponent final : public Component
 #ifdef USE_MDNS_STORE_SERVICES
  StaticVector<MDNSService, MDNS_SERVICE_COUNT> services_{};
 #endif
-#if defined(USE_RP2040) && defined(USE_MDNS_EVENT_DRIVEN_POLLING)
+#if defined(USE_RP2) && defined(USE_MDNS_EVENT_DRIVEN_POLLING)
  // RP2040 defers MDNS.begin() until the first IP-up event; this tracks that.
  bool initialized_{false};
 #endif
@@ -1,5 +1,5 @@
 #include "esphome/core/defines.h"
-#if defined(USE_RP2040) && defined(USE_MDNS)
+#if defined(USE_RP2) && defined(USE_MDNS)

 #include "esphome/components/network/ip_address.h"
 #include "esphome/components/network/util.h"
@@ -17,7 +17,7 @@

 namespace esphome::mdns {

-static void register_rp2040(MDNSComponent *, StaticVector<MDNSService, MDNS_SERVICE_COUNT> &services) {
+static void register_rp2(MDNSComponent *, StaticVector<MDNSService, MDNS_SERVICE_COUNT> &services) {
  MDNS.begin(App.get_name().c_str());

  for (const auto &service : services) {
@@ -82,7 +82,7 @@ void MDNSComponent::on_ip_state(const network::IPAddresses &ips, const network::
    return;
  }
  if (!this->initialized_) {
-    this->setup_buffers_and_register_(register_rp2040);
+    this->setup_buffers_and_register_(register_rp2);
    this->initialized_ = true;
  } else {
    MDNS.notifyAPChange();
@@ -7,22 +7,22 @@

 namespace esphome::micro_wake_word {

-template<typename... Ts> class StartAction : public Action<Ts...>, public Parented<MicroWakeWord> {
+template<typename... Ts> class StartAction final : public Action<Ts...>, public Parented<MicroWakeWord> {
 public:
  void play(const Ts &...x) override { this->parent_->start(); }
 };

-template<typename... Ts> class StopAction : public Action<Ts...>, public Parented<MicroWakeWord> {
+template<typename... Ts> class StopAction final : public Action<Ts...>, public Parented<MicroWakeWord> {
 public:
  void play(const Ts &...x) override { this->parent_->stop(); }
 };

-template<typename... Ts> class IsRunningCondition : public Condition<Ts...>, public Parented<MicroWakeWord> {
+template<typename... Ts> class IsRunningCondition final : public Condition<Ts...>, public Parented<MicroWakeWord> {
 public:
  bool check(const Ts &...x) override { return this->parent_->is_running(); }
 };

-template<typename... Ts> class EnableModelAction : public Action<Ts...> {
+template<typename... Ts> class EnableModelAction final : public Action<Ts...> {
 public:
  explicit EnableModelAction(WakeWordModel *wake_word_model) : wake_word_model_(wake_word_model) {}
  void play(const Ts &...x) override { this->wake_word_model_->enable(); }
@@ -31,7 +31,7 @@ template<typename... Ts> class EnableModelAction : public Action<Ts...> {
  WakeWordModel *wake_word_model_;
 };

-template<typename... Ts> class DisableModelAction : public Action<Ts...> {
+template<typename... Ts> class DisableModelAction final : public Action<Ts...> {
 public:
  explicit DisableModelAction(WakeWordModel *wake_word_model) : wake_word_model_(wake_word_model) {}
  void play(const Ts &...x) override { this->wake_word_model_->disable(); }
@@ -40,7 +40,7 @@ template<typename... Ts> class DisableModelAction : public Action<Ts...> {
  WakeWordModel *wake_word_model_;
 };

-template<typename... Ts> class ModelIsEnabledCondition : public Condition<Ts...> {
+template<typename... Ts> class ModelIsEnabledCondition final : public Condition<Ts...> {
 public:
  explicit ModelIsEnabledCondition(WakeWordModel *wake_word_model) : wake_word_model_(wake_word_model) {}
  bool check(const Ts &...x) override { return this->wake_word_model_->is_enabled(); }
@@ -31,10 +31,10 @@ enum State {
  STOPPED,
 };

-class MicroWakeWord : public Component
+class MicroWakeWord final : public Component
 #ifdef USE_OTA_STATE_LISTENER
    ,
-                      public ota::OTAGlobalStateListener
+                            public ota::OTAGlobalStateListener
 #endif
 {
 public:
@@ -7,34 +7,34 @@

 namespace esphome::microphone {

-template<typename... Ts> class CaptureAction : public Action<Ts...>, public Parented<Microphone> {
+template<typename... Ts> class CaptureAction final : public Action<Ts...>, public Parented<Microphone> {
  void play(const Ts &...x) override { this->parent_->start(); }
 };

-template<typename... Ts> class StopCaptureAction : public Action<Ts...>, public Parented<Microphone> {
+template<typename... Ts> class StopCaptureAction final : public Action<Ts...>, public Parented<Microphone> {
  void play(const Ts &...x) override { this->parent_->stop(); }
 };

-template<typename... Ts> class MuteAction : public Action<Ts...>, public Parented<Microphone> {
+template<typename... Ts> class MuteAction final : public Action<Ts...>, public Parented<Microphone> {
  void play(const Ts &...x) override { this->parent_->set_mute_state(true); }
 };
-template<typename... Ts> class UnmuteAction : public Action<Ts...>, public Parented<Microphone> {
+template<typename... Ts> class UnmuteAction final : public Action<Ts...>, public Parented<Microphone> {
  void play(const Ts &...x) override { this->parent_->set_mute_state(false); }
 };

-class DataTrigger : public Trigger<const std::vector<uint8_t> &> {
+class DataTrigger final : public Trigger<const std::vector<uint8_t> &> {
 public:
  explicit DataTrigger(Microphone *mic) {
    mic->add_data_callback([this](const std::vector<uint8_t> &data) { this->trigger(data); });
  }
 };

-template<typename... Ts> class IsCapturingCondition : public Condition<Ts...>, public Parented<Microphone> {
+template<typename... Ts> class IsCapturingCondition final : public Condition<Ts...>, public Parented<Microphone> {
 public:
  bool check(const Ts &...x) override { return this->parent_->is_running(); }
 };

-template<typename... Ts> class IsMutedCondition : public Condition<Ts...>, public Parented<Microphone> {
+template<typename... Ts> class IsMutedCondition final : public Condition<Ts...>, public Parented<Microphone> {
 public:
  bool check(const Ts &...x) override { return this->parent_->get_mute_state(); }
 };
@@ -13,7 +13,7 @@ namespace esphome::microphone {

 static const int32_t MAX_GAIN_FACTOR = 64;

-class MicrophoneSource {
+class MicrophoneSource final {
  /*
   * @brief Helper class that handles converting raw microphone data to a requested format.
   * Components requesting microphone audio should register a callback through this class instead of registering a
@@ -7,7 +7,7 @@

 namespace esphome::mics_4514 {

-class MICS4514Component : public PollingComponent, public i2c::I2CDevice {
+class MICS4514Component final : public PollingComponent, public i2c::I2CDevice {
  SUB_SENSOR(carbon_monoxide)
  SUB_SENSOR(nitrogen_dioxide)
  SUB_SENSOR(methane)
@@ -21,7 +21,7 @@ using climate::ClimateModeMask;
 using climate::ClimateSwingModeMask;
 using climate::ClimatePresetMask;

-class AirConditioner : public ApplianceBase<dudanov::midea::ac::AirConditioner>, public climate::Climate {
+class AirConditioner final : public ApplianceBase<dudanov::midea::ac::AirConditioner>, public climate::Climate {
 public:
  void dump_config() override;
  void set_outdoor_temperature_sensor(Sensor *sensor) { this->outdoor_sensor_ = sensor; }
@@ -11,7 +11,7 @@ const uint8_t MIDEA_TEMPC_MAX = 30;  // Celsius
 const uint8_t MIDEA_TEMPF_MIN = 62;  // Fahrenheit
 const uint8_t MIDEA_TEMPF_MAX = 86;  // Fahrenheit

-class MideaIR : public climate_ir::ClimateIR {
+class MideaIR final : public climate_ir::ClimateIR {
 public:
  MideaIR()
      : climate_ir::ClimateIR(
@@ -35,7 +35,7 @@ const uint8_t MADCTL_MV = 0x20;     // row/column swap
 const uint8_t MADCTL_XFLIP = 0x02;  // Mirror the display horizontally
 const uint8_t MADCTL_YFLIP = 0x01;  // Mirror the display vertically

-class MipiDsi : public display::Display {
+class MipiDsi final : public display::Display {
 public:
  MipiDsi(size_t width, size_t height, display::ColorBitness color_depth, uint8_t pixel_mode)
      : width_(width), height_(height), color_depth_(color_depth), pixel_mode_(pixel_mode) {}
@@ -98,9 +98,9 @@ class MipiRgb : public display::Display {
 };

 #ifdef USE_SPI
-class MipiRgbSpi : public MipiRgb,
-                   public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW, spi::CLOCK_PHASE_LEADING,
-                                         spi::DATA_RATE_1MHZ> {
+class MipiRgbSpi final : public MipiRgb,
+                         public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW,
+                                               spi::CLOCK_PHASE_LEADING, spi::DATA_RATE_1MHZ> {
 public:
  MipiRgbSpi(int width, int height) : MipiRgb(width, height) {}

@@ -38,7 +38,7 @@ enum VerticalDirection {
  VERTICAL_DIRECTION_DOWN = 0x28,
 };

-class MitsubishiClimate : public climate_ir::ClimateIR {
+class MitsubishiClimate final : public climate_ir::ClimateIR {
 public:
  MitsubishiClimate()
      : climate_ir::ClimateIR(MITSUBISHI_TEMP_MIN, MITSUBISHI_TEMP_MAX, 1.0f, true, true,
@@ -6,7 +6,7 @@
 #ifdef USE_ESP32

 namespace esphome::mixer_speaker {
-template<typename... Ts> class DuckingApplyAction : public Action<Ts...>, public Parented<SourceSpeaker> {
+template<typename... Ts> class DuckingApplyAction final : public Action<Ts...>, public Parented<SourceSpeaker> {
  TEMPLATABLE_VALUE(uint8_t, decibel_reduction);
  TEMPLATABLE_VALUE(uint32_t, duration);
  void play(const Ts &...x) override {
@@ -44,7 +44,7 @@ namespace esphome::mixer_speaker {

 class MixerSpeaker;

-class SourceSpeaker : public speaker::Speaker, public Component {
+class SourceSpeaker final : public speaker::Speaker, public Component {
 public:
  void dump_config() override;
  void setup() override;
@@ -118,7 +118,7 @@ class SourceSpeaker : public speaker::Speaker, public Component {
  uint32_t stopping_start_ms_{0};
 };

-class MixerSpeaker : public Component {
+class MixerSpeaker final : public Component {
 public:
  void dump_config() override;
  void setup() override;
@@ -20,7 +20,7 @@ enum MLX90393Setting {
  MLX90393_LAST,
 };

-class MLX90393Cls : public PollingComponent, public i2c::I2CDevice, public MLX90393Hal {
+class MLX90393Cls final : public PollingComponent, public i2c::I2CDevice, public MLX90393Hal {
 public:
  void setup() override;
  void dump_config() override;
@@ -6,7 +6,7 @@

 namespace esphome::mlx90614 {

-class MLX90614Component : public PollingComponent, public i2c::I2CDevice {
+class MLX90614Component final : public PollingComponent, public i2c::I2CDevice {
 public:
  void setup() override;
  void dump_config() override;
@@ -12,7 +12,7 @@ enum MMC5603Datarate {
  MMC5603_DATARATE_255_0_HZ,
 };

-class MMC5603Component : public PollingComponent, public i2c::I2CDevice {
+class MMC5603Component final : public PollingComponent, public i2c::I2CDevice {
 public:
  void setup() override;
  void dump_config() override;
@@ -6,7 +6,7 @@

 namespace esphome::mmc5983 {

-class MMC5983Component : public PollingComponent, public i2c::I2CDevice {
+class MMC5983Component final : public PollingComponent, public i2c::I2CDevice {
 public:
  void update() override;
  void setup() override;
@@ -29,7 +29,7 @@ MODBUS_WRITE_REGISTER_TYPE = {
 MODBUS_REGISTER_TYPE = {
    **MODBUS_WRITE_REGISTER_TYPE,
    "discrete_input": ModbusRegisterType.DISCRETE_INPUT,
-    "read": ModbusRegisterType.READ,
+    "read": ModbusRegisterType.INPUT_REGISTER,
 }

 SensorValueType_ns = modbus_helpers_ns.namespace("SensorValueType")
@@ -360,7 +360,7 @@ void ModbusServerHub::process_modbus_client_frame_(uint8_t address, uint8_t func
    return;
  }

-  ServerResponseStatus status;
+  ResponseStatus status;
  uint8_t response_buffer[modbus::MAX_RAW_SIZE];
  const uint8_t *response_data = response_buffer;
  uint16_t response_len = 0;
@@ -381,9 +381,9 @@ void ModbusServerHub::process_modbus_client_frame_(uint8_t address, uint8_t func
      }
      RegisterValues registers;
      if (static_cast<ModbusFunctionCode>(function_code) == ModbusFunctionCode::READ_HOLDING_REGISTERS) {
-        status = device->on_modbus_read_holding_registers(start_address, number_of_registers, registers);
+        status = device->on_read_holding_registers(start_address, number_of_registers, registers);
      } else {
-        status = device->on_modbus_read_input_registers(start_address, number_of_registers, registers);
+        status = device->on_read_input_registers(start_address, number_of_registers, registers);
      }

      // A handler that returns an exception leaves registers partially filled, so check the exception
@@ -436,7 +436,7 @@ void ModbusServerHub::process_modbus_client_frame_(uint8_t address, uint8_t func
      for (uint16_t i = 0; i < number_of_registers; i++) {
        registers.push_back(helpers::get_data<uint16_t>(data, values_offset + i * 2));
      }
-      status = device->on_modbus_write_registers(start_address, registers);
+      status = device->on_write_registers(start_address, registers);
      response_data = data;  // echo the request header per Modbus 6.6, 6.12
      response_len = 4;
      break;
@@ -201,8 +201,9 @@ class ModbusClientDevice {
 using ModbusDevice ESPDEPRECATED("Use ModbusClientDevice instead. Removed in 2026.12.0",
                                 "2026.6.0") = ModbusClientDevice;

-// Result of a server register handler: std::nullopt means success, otherwise the Modbus exception code to return.
-using ServerResponseStatus = std::optional<ModbusExceptionCode>;
+// Transaction status: std::nullopt on success, otherwise the Modbus exception code. Server handlers return it;
+// (future) client response callbacks receive it. Named without a side prefix so both directions share it.
+using ResponseStatus = std::optional<ModbusExceptionCode>;
 // Register values exchanged with server handlers, in host byte order. Sized at the larger of the two protocol
 // maxima (read = 125 / 0x7D, write = 123 / 0x7B); the per-direction count limit is enforced by the hub, not by
 // the capacity of this type.
@@ -219,19 +220,19 @@ class ModbusServerDevice {
  ModbusServerDevice &operator=(ModbusServerDevice &&) = delete;
  void set_address(uint8_t address) { this->address_ = address; }
  uint8_t get_address() const { return this->address_; }
-  virtual ServerResponseStatus on_modbus_read_registers(uint16_t start_address, uint16_t number_of_registers,
-                                                        RegisterValues &registers) {
+  virtual ResponseStatus on_read_registers(uint16_t start_address, uint16_t number_of_registers,
+                                           RegisterValues &registers) {
    return ModbusExceptionCode::ILLEGAL_FUNCTION;
  };
-  virtual ServerResponseStatus on_modbus_read_input_registers(uint16_t start_address, uint16_t number_of_registers,
-                                                              RegisterValues &registers) {
-    return this->on_modbus_read_registers(start_address, number_of_registers, registers);
+  virtual ResponseStatus on_read_input_registers(uint16_t start_address, uint16_t number_of_registers,
+                                                 RegisterValues &registers) {
+    return this->on_read_registers(start_address, number_of_registers, registers);
  };
-  virtual ServerResponseStatus on_modbus_read_holding_registers(uint16_t start_address, uint16_t number_of_registers,
-                                                                RegisterValues &registers) {
-    return this->on_modbus_read_registers(start_address, number_of_registers, registers);
+  virtual ResponseStatus on_read_holding_registers(uint16_t start_address, uint16_t number_of_registers,
+                                                   RegisterValues &registers) {
+    return this->on_read_registers(start_address, number_of_registers, registers);
  };
-  virtual ServerResponseStatus on_modbus_write_registers(uint16_t start_address, const RegisterValues &registers) {
+  virtual ResponseStatus on_write_registers(uint16_t start_address, const RegisterValues &registers) {
    return ModbusExceptionCode::ILLEGAL_FUNCTION;
  };

@@ -1,6 +1,7 @@
 #pragma once

 #include "esphome/core/component.h"
+#include "esphome/core/helpers.h"

 namespace esphome::modbus {

@@ -48,7 +49,11 @@ enum class ModbusRegisterType : uint8_t {
  COIL = 0x01,
  DISCRETE_INPUT = 0x02,
  HOLDING = 0x03,
-  READ = 0x04,
+  // Named INPUT_REGISTER (not INPUT) because Arduino cores define INPUT as a macro.
+  INPUT_REGISTER = 0x04,
+  // Remove before 2027.2.0
+  READ ESPDEPRECATED("Use ModbusRegisterType::INPUT_REGISTER instead. Removed in 2027.2.0", "2026.7.0") =
+      INPUT_REGISTER,
 };

 // 7 MODBUS Exception Responses:
@@ -90,7 +90,7 @@ inline ModbusFunctionCode modbus_register_read_function(ModbusRegisterType reg_t
      return ModbusFunctionCode::READ_DISCRETE_INPUTS;
    case ModbusRegisterType::HOLDING:
      return ModbusFunctionCode::READ_HOLDING_REGISTERS;
-    case ModbusRegisterType::READ:
+    case ModbusRegisterType::INPUT_REGISTER:
      return ModbusFunctionCode::READ_INPUT_REGISTERS;
    default:
      return ModbusFunctionCode::INVALID;
@@ -104,7 +104,7 @@ inline ModbusFunctionCode modbus_register_write_function(ModbusRegisterType reg_
    case ModbusRegisterType::HOLDING:
      return multiple ? ModbusFunctionCode::WRITE_MULTIPLE_REGISTERS : ModbusFunctionCode::WRITE_SINGLE_REGISTER;
    // These register types can't be written (per spec)
-    case ModbusRegisterType::READ:
+    case ModbusRegisterType::INPUT_REGISTER:
    case ModbusRegisterType::DISCRETE_INPUT:
    default:
      return ModbusFunctionCode::INVALID;
@@ -220,7 +220,7 @@ def function_code_to_register(function_code):
        "read_coils": ModbusRegisterType.COIL,
        "read_discrete_inputs": ModbusRegisterType.DISCRETE_INPUT,
        "read_holding_registers": ModbusRegisterType.HOLDING,
-        "read_input_registers": ModbusRegisterType.READ,
+        "read_input_registers": ModbusRegisterType.INPUT_REGISTER,
        "write_single_coil": ModbusRegisterType.COIL,
        "write_single_register": ModbusRegisterType.HOLDING,
        "write_multiple_coils": ModbusRegisterType.COIL,
@@ -8,7 +8,7 @@

 namespace esphome::modbus_controller {

-class ModbusBinarySensor : public Component, public binary_sensor::BinarySensor, public SensorItem {
+class ModbusBinarySensor final : public Component, public binary_sensor::BinarySensor, public SensorItem {
 public:
  ModbusBinarySensor(ModbusRegisterType register_type, uint16_t start_address, uint8_t offset, uint32_t bitmask,
                     uint16_t skip_updates, bool force_new_range) {
@@ -279,7 +279,7 @@ class ModbusCommandItem {
 * Responses for the commands are dispatched to the modbus sensor items.
 */

-class ModbusController : public PollingComponent, public modbus::ModbusClientDevice {
+class ModbusController final : public PollingComponent, public modbus::ModbusClientDevice {
 public:
  void dump_config() override;
  void loop() override;
@@ -10,7 +10,7 @@ namespace esphome::modbus_controller {

 using value_to_data_t = std::function<float>(float);

-class ModbusNumber : public number::Number, public Component, public SensorItem {
+class ModbusNumber final : public number::Number, public Component, public SensorItem {
 public:
  ModbusNumber(ModbusRegisterType register_type, uint16_t start_address, uint8_t offset, uint32_t bitmask,
               SensorValueType value_type, int register_count, uint16_t skip_updates, bool force_new_range) {
@@ -8,7 +8,7 @@

 namespace esphome::modbus_controller {

-class ModbusFloatOutput : public output::FloatOutput, public Component, public SensorItem {
+class ModbusFloatOutput final : public output::FloatOutput, public Component, public SensorItem {
 public:
  ModbusFloatOutput(uint16_t start_address, uint8_t offset, SensorValueType value_type, int register_count) {
    this->register_type = ModbusRegisterType::HOLDING;
@@ -41,7 +41,7 @@ class ModbusFloatOutput : public output::FloatOutput, public Component, public S
  bool use_write_multiple_{false};
 };

-class ModbusBinaryOutput : public output::BinaryOutput, public Component, public SensorItem {
+class ModbusBinaryOutput final : public output::BinaryOutput, public Component, public SensorItem {
 public:
  ModbusBinaryOutput(uint16_t start_address, uint8_t offset) {
    this->register_type = ModbusRegisterType::COIL;
@@ -9,7 +9,7 @@

 namespace esphome::modbus_controller {

-class ModbusSelect : public Component, public select::Select, public SensorItem {
+class ModbusSelect final : public Component, public select::Select, public SensorItem {
 public:
  ModbusSelect(SensorValueType sensor_value_type, uint16_t start_address, uint8_t register_count, uint16_t skip_updates,
               bool force_new_range, std::vector<int64_t> mapping) {
@@ -8,7 +8,7 @@

 namespace esphome::modbus_controller {

-class ModbusSensor : public Component, public sensor::Sensor, public SensorItem {
+class ModbusSensor final : public Component, public sensor::Sensor, public SensorItem {
 public:
  ModbusSensor(ModbusRegisterType register_type, uint16_t start_address, uint8_t offset, uint32_t bitmask,
               SensorValueType value_type, int register_count, uint16_t skip_updates, bool force_new_range) {
@@ -8,7 +8,7 @@

 namespace esphome::modbus_controller {

-class ModbusSwitch : public Component, public switch_::Switch, public SensorItem {
+class ModbusSwitch final : public Component, public switch_::Switch, public SensorItem {
 public:
  ModbusSwitch(ModbusRegisterType register_type, uint16_t start_address, uint8_t offset, uint32_t bitmask,
               uint16_t skip_updates, bool force_new_range) {
@@ -10,7 +10,7 @@ namespace esphome::modbus_controller {

 enum class RawEncoding { NONE = 0, HEXBYTES = 1, COMMA = 2, ANSI = 3 };

-class ModbusTextSensor : public Component, public text_sensor::TextSensor, public SensorItem {
+class ModbusTextSensor final : public Component, public text_sensor::TextSensor, public SensorItem {
 public:
  ModbusTextSensor(ModbusRegisterType register_type, uint16_t start_address, uint8_t offset, uint8_t register_count,
                   uint16_t response_bytes, RawEncoding encode, uint16_t skip_updates, bool force_new_range) {
@@ -27,9 +27,8 @@ ServerRegister *ModbusServer::find_containing_register_(uint32_t address) const
  return nullptr;
 }

-modbus::ServerResponseStatus ModbusServer::on_modbus_read_registers(uint16_t start_address,
-                                                                    uint16_t number_of_registers,
-                                                                    modbus::RegisterValues &registers) {
+modbus::ResponseStatus ModbusServer::on_read_registers(uint16_t start_address, uint16_t number_of_registers,
+                                                       modbus::RegisterValues &registers) {
  ESP_LOGV(TAG,
           "Received read holding/input registers for device 0x%X. Start address: 0x%X. Number of registers: 0x%X.",
           this->address_, start_address, number_of_registers);
@@ -101,8 +100,8 @@ modbus::ServerResponseStatus ModbusServer::on_modbus_read_registers(uint16_t sta
  return {};
 }

-modbus::ServerResponseStatus ModbusServer::on_modbus_write_registers(uint16_t start_address,
-                                                                     const modbus::RegisterValues &registers) {
+modbus::ResponseStatus ModbusServer::on_write_registers(uint16_t start_address,
+                                                        const modbus::RegisterValues &registers) {
  // registers holds the values to write in host byte order; its size is the register count.
  ESP_LOGV(TAG, "Received write registers for device 0x%X. Start address: 0x%X. Number of registers: 0x%zX.",
           this->address_, start_address, registers.size());
@@ -95,18 +95,17 @@ class ServerRegister {
  WriteLambda write_lambda;
 };

-class ModbusServer : public Component, public modbus::ModbusServerDevice {
+class ModbusServer final : public Component, public modbus::ModbusServerDevice {
 public:
  void dump_config() override;

  /// Registers a server register with the controller. Called by esphomes code generator
  void add_server_register(ServerRegister *server_register) { server_registers_.push_back(server_register); }
  /// called when a modbus request (function code 0x03 or 0x04) was parsed without errors
-  modbus::ServerResponseStatus on_modbus_read_registers(uint16_t start_address, uint16_t number_of_registers,
-                                                        modbus::RegisterValues &registers) final;
+  modbus::ResponseStatus on_read_registers(uint16_t start_address, uint16_t number_of_registers,
+                                           modbus::RegisterValues &registers) final;
  /// called when a modbus request (function code 0x06 or 0x10) was parsed without errors
-  modbus::ServerResponseStatus on_modbus_write_registers(uint16_t start_address,
-                                                         const modbus::RegisterValues &registers) final;
+  modbus::ResponseStatus on_write_registers(uint16_t start_address, const modbus::RegisterValues &registers) final;
  /// Called by esphome generated code to set the server courtesy response object
  void set_server_courtesy_response(const ServerCourtesyResponse &server_courtesy_response) {
    this->server_courtesy_response_ = server_courtesy_response;
@@ -6,7 +6,7 @@

 namespace esphome::monochromatic {

-class MonochromaticLightOutput : public light::LightOutput {
+class MonochromaticLightOutput final : public light::LightOutput {
 public:
  void set_output(output::FloatOutput *output) { output_ = output; }
  light::LightTraits get_traits() override {
@@ -9,7 +9,7 @@

 namespace esphome::mopeka_ble {

-class MopekaListener : public esp32_ble_tracker::ESPBTDeviceListener {
+class MopekaListener final : public esp32_ble_tracker::ESPBTDeviceListener {
 public:
  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
  void set_show_sensors_without_sync(bool show_sensors_without_sync) {
@@ -27,7 +27,7 @@ enum SensorType {
 // measurement may be inaccurate.
 enum SensorReadQuality { QUALITY_HIGH = 0x3, QUALITY_MED = 0x2, QUALITY_LOW = 0x1, QUALITY_ZERO = 0x0 };

-class MopekaProCheck : public Component, public esp32_ble_tracker::ESPBTDeviceListener {
+class MopekaProCheck final : public Component, public esp32_ble_tracker::ESPBTDeviceListener {
 public:
  void set_address(uint64_t address) { address_ = address; };

@@ -42,7 +42,7 @@ struct mopeka_std_package {  // NOLINT(readability-identifier-naming,altera-stru
  mopeka_std_values val[3];
 } __attribute__((packed));

-class MopekaStdCheck : public Component, public esp32_ble_tracker::ESPBTDeviceListener {
+class MopekaStdCheck final : public Component, public esp32_ble_tracker::ESPBTDeviceListener {
 public:
  void set_address(uint64_t address) { address_ = address; };

--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
J. Nick Koston	de6a4f793f	[libretiny] Use standard logger tag names	2026-07-06 17:28:14 -05:00
esphome[bot]	0b311962b5	Bump bundled esphome-device-builder to 1.2.0 (#17430 )	2026-07-06 17:09:51 -05:00
Jonathan Swoboda	b22def399f	[espnow] Add max_payload_size option for ESP-NOW v2 frames (#17360 )	2026-07-06 17:08:56 -04:00
Jesse Hills	cdd334284e	[rp2] Rename rp2040 platform to rp2 (#17145 ) Co-authored-by: Jonathan Swoboda <154711427+swoboda1337@users.noreply.github.com>	2026-07-07 08:20:24 +12:00
Jesse Hills	9caf431740	[tests] Document dict-style packages requirement for batch grouping (#17420 )	2026-07-07 07:55:53 +12:00
tomaszduda23	468b32b986	[nrf52] add better error message for OTA error (#17407 )	2026-07-06 15:50:57 -04:00
tomaszduda23	39ad583b39	[nrf52] allow to build for non nrf52840 boards (#17373 ) Co-authored-by: Jonathan Swoboda <154711427+swoboda1337@users.noreply.github.com>	2026-07-06 15:48:24 -04:00
J. Nick Koston	90403576c4	[wifi] Accept boolean-like strings for fast_connect again (#17414 )	2026-07-06 14:42:30 -05:00
J. Nick Koston	51fa25856d	[bluetooth_proxy] Take over stale advertisement subscription instead of rejecting the new subscriber (#17423 )	2026-07-06 14:42:14 -05:00
dependabot[bot]	27d4b63a8a	Bump astral-sh/setup-uv from 8.2.0 to 8.3.0 (#17428 ) Signed-off-by: dependabot[bot] <support@github.com>	2026-07-06 14:41:55 -05:00
dependabot[bot]	104c2f86f6	Bump astral-sh/setup-uv from 8.2.0 to 8.3.0 in /.github/actions/restore-python (#17427 ) Signed-off-by: dependabot[bot] <support@github.com>	2026-07-06 14:41:43 -05:00
dependabot[bot]	e64a79f431	Bump setuptools from 82.0.1 to 83.0.0 (#17426 ) Signed-off-by: dependabot[bot] <support@github.com>	2026-07-06 14:41:29 -05:00
Oliver Kleinecke	b79db76099	[core] helpers.h - Implement pop_back method for vector (#17390 )	2026-07-06 13:54:20 -05:00
Bonne Eggleston	66ab807596	[modbus] API naming (#17378 ) Co-authored-by: Claude Fable 5 <noreply@anthropic.com>	2026-07-06 11:43:31 -05:00
Jesse Hills	2067da4ff5	Mark configurable classes as final (11/21: microphone-ms8607) (#16962 )	2026-07-06 16:33:07 +12:00
Jesse Hills	cfdd6d383f	Mark configurable classes as final (19/21: uart-wl_134) (#16970 )	2026-07-06 16:32:42 +12:00
Jesse Hills	bdd51bd476	Mark configurable classes as final (16/21: sm10bit_base-ssd1331_spi) (#16967 )	2026-07-06 16:32:35 +12:00
Jesse Hills	af7b6e3589	Mark configurable classes as final (17/21: ssd1351_spi-tem3200) (#16968 )	2026-07-06 16:32:26 +12:00
Jesse Hills	fd86417bf5	[cst328] Update test package (#17415 )	2026-07-06 16:29:45 +12:00