mirror of
https://github.com/esphome/esphome.git
synced 2026-10-22 13:56:10 +00:00
Compare commits
92
Commits
@@ -1,156 +0,0 @@
|
||||
---
|
||||
name: display-test
|
||||
description: Test an ESPHome display driver on a real panel with a camera. Use when a task asks to verify a display (LCD, e-paper, OLED, RLCD) on hardware, check orientation/rotation, partial updates, colours, contrast, or that text and shapes render correctly. Covers finding the USB port, flashing a test pattern, capturing the panel with any camera, and reading the photo.
|
||||
allowed-tools: Read, Write, Edit, Bash, Glob, Grep
|
||||
---
|
||||
|
||||
# Display testing with a camera
|
||||
|
||||
Point a camera at the panel to get visual evidence that a driver renders correctly. Any camera
|
||||
and capture tool works; this skill covers the common ones. `$SKILL` below is this directory
|
||||
(`.agents/skills/display-test`).
|
||||
|
||||
## Ask before using a camera
|
||||
|
||||
A camera can show people and rooms, not only the panel. Before the first capture, ask the user
|
||||
for permission and for which camera to use. List the cameras the host has (the commands below
|
||||
show how), name the one you intend to use, and wait for the user to confirm it. Do not pick a
|
||||
camera yourself, and do not fall back to another camera if the chosen one fails; ask again.
|
||||
|
||||
The permission covers this session and the camera the user named. Ask again for a different
|
||||
camera or in a new session. If the user declines, stop and report that the display was not
|
||||
checked visually.
|
||||
|
||||
## Capturing a frame
|
||||
|
||||
Grab a still image, skipping the first few frames so auto-exposure and white balance settle.
|
||||
Read the JPEG with the Read tool; the image is shown visually.
|
||||
|
||||
### macOS
|
||||
|
||||
The bundled Swift tool uses AVFoundation and avoids the frame-grabbing problems some USB
|
||||
cameras have with other tools:
|
||||
|
||||
```bash
|
||||
mkdir -p /tmp/camsnap /tmp/display-test
|
||||
swiftc -O "$SKILL/scripts/camsnap.swift" -o /tmp/camsnap/camsnap
|
||||
/tmp/camsnap/camsnap <camera-name-substring> /tmp/display-test/after.jpg 30
|
||||
```
|
||||
|
||||
The camera argument is a case-insensitive substring of the name AVFoundation reports. If it does
|
||||
not match, the tool lists the cameras it found, so a run with a name that matches nothing lists
|
||||
the cameras without capturing. Use a substring that matches only the camera the user approved.
|
||||
It creates the output directory if needed and reports encoding or write errors on stderr. Other
|
||||
options include `ffmpeg` with `avfoundation` input, `imagesnap`, or Photo Booth's still capture.
|
||||
|
||||
### Linux
|
||||
|
||||
Use `ffmpeg` with the v4l2 input, `fswebcam`, or `v4l2-ctl`. With `ffmpeg`, `-ss 2` after the
|
||||
input discards the first two seconds of frames while exposure settles:
|
||||
|
||||
```bash
|
||||
mkdir -p /tmp/display-test
|
||||
ffmpeg -f v4l2 -i /dev/video0 -ss 2 -frames:v 1 -y /tmp/display-test/after.jpg
|
||||
# or
|
||||
fswebcam -d /dev/video0 --skip 10 /tmp/display-test/after.jpg
|
||||
```
|
||||
|
||||
List devices with `v4l2-ctl --list-devices`.
|
||||
|
||||
### Windows
|
||||
|
||||
Use `ffmpeg` with the DirectShow input (`-ss 2` skips the first frames, as on Linux), or any
|
||||
camera application that can save a still image:
|
||||
|
||||
```powershell
|
||||
mkdir C:\temp -Force | Out-Null
|
||||
ffmpeg -f dshow -list_devices true -i dummy # find the device name
|
||||
ffmpeg -f dshow -i video="<device name>" -ss 2 -frames:v 1 -y C:\temp\after.jpg
|
||||
```
|
||||
|
||||
### Camera caveats
|
||||
|
||||
- The board may sit at an angle. Do not trust absolute pixel positions or aspect ratios from the
|
||||
photo; judge orientation, ordering and approximate spacing, using the corner markers as
|
||||
references.
|
||||
- Reflections or a glossy cover can brighten one side. Capture again if a region is unclear.
|
||||
- A moving pattern is caught at an arbitrary phase. Take several captures, or use a static marker
|
||||
per position.
|
||||
|
||||
## Board and port
|
||||
|
||||
Find the port; names change on every replug:
|
||||
|
||||
```bash
|
||||
python3 "$SKILL/../hardware-test/scripts/ports.py"
|
||||
```
|
||||
|
||||
Native-USB ESP32-S3/C3/C6/H2 boards show up as `USB JTAG/serial debug unit` and need
|
||||
`logger: hardware_uart: USB_SERIAL_JTAG`.
|
||||
|
||||
## Test pattern
|
||||
|
||||
Write a scratch config outside the checkout. Use one `name:` per board and include:
|
||||
|
||||
- a white background, a black border and a filled square at the centre, drawn in the first
|
||||
update (full-window check and scale);
|
||||
- a 60x20 bar near each corner, one bar per later update with `auto_clear_enabled: false`, so
|
||||
each bar is written by its own partial window. The bars are wider than tall, which shows a
|
||||
90 or 270 degree rotation; the corners exercise the window alignment;
|
||||
- a 20x20 square under the left end of the top-left bar, drawn in the same update, which marks
|
||||
the top-left corner and shows a 180 degree rotation or a mirrored image.
|
||||
|
||||
Use `Color::BLACK` and `Color::WHITE` in lambdas. Do not use the old `COLOR_OFF`/`COLOR_ON`
|
||||
constants; black must mean black.
|
||||
|
||||
A ready template is in `$SKILL/templates/display-pattern.yaml`. Substitute the display platform,
|
||||
pins and (for a driver with fonts) a font. The marker pattern needs no font.
|
||||
|
||||
## Build, flash, capture
|
||||
|
||||
Run from the worktree under test so `python -m esphome` imports the checkout, not an installed
|
||||
copy:
|
||||
|
||||
```bash
|
||||
cd <worktree>
|
||||
python3 -c "import esphome; print(esphome.__file__)" # must print the worktree path
|
||||
PYTHONUNBUFFERED=1 python3 -m esphome compile /tmp/display-test/display-pattern.yaml
|
||||
PYTHONUNBUFFERED=1 python3 -m esphome upload /tmp/display-test/display-pattern.yaml \
|
||||
--device /dev/cu.usbmodemXXXX
|
||||
sleep 6 # boot plus a few update intervals
|
||||
<capture command> /tmp/display-test/after.jpg
|
||||
```
|
||||
|
||||
The device path differs by OS and host; use the path printed by `ports.py`. If the USB console
|
||||
wedges during flashing (esptool `No serial data received`), replug the board and retry. A board
|
||||
powered only by a battery may need the USB cable for flashing; the panel keeps its image when
|
||||
power is removed, which is useful for checking that an image is bistable.
|
||||
|
||||
## What to check
|
||||
|
||||
1. **Orientation**: the extra square sits under the bar in the expected top-left corner. If it is
|
||||
in another corner, the image is rotated or mirrored. Test `rotation:` values with the same
|
||||
pattern. The logical width and height swap at 90 and
|
||||
270 degrees, so the 60x20 corner bars should then appear taller than wide on the physical
|
||||
panel.
|
||||
2. **Coverage**: the border touches all four edges, with no dead rows or columns at the edges.
|
||||
3. **Partial updates**: with `auto_clear_enabled: false`, draw one marker per update. Each should
|
||||
appear exactly at its requested position with no smearing, offset or mirrored placement.
|
||||
Include all four corners.
|
||||
4. **Text and contrast**: sharp glyphs, correct polarity (black text on white, not inverted), no
|
||||
ghosting from the previous frame.
|
||||
5. **Speed**: if the driver logs transfer sizes, check that a full refresh and a partial window
|
||||
take the expected times.
|
||||
|
||||
Record the build commit, board, config, and the captured image path when reporting results.
|
||||
|
||||
## When a partial update looks wrong
|
||||
|
||||
Take a marker-only capture before assuming the mapping is wrong: the camera's perspective makes
|
||||
absolute positions deceptive. If markers land in mirrored positions, the controller's address
|
||||
order (`MADCTL` MX/MY/MV) or the RAM block mapping is inverted for the window; verify the
|
||||
full-frame path separately, then fix the window computation.
|
||||
|
||||
## Add findings
|
||||
|
||||
Add new capture tools, panel quirks, or recovery steps here so the next session starts ahead.
|
||||
@@ -1,71 +0,0 @@
|
||||
// camsnap <camera name substring> <output.jpg> [frames to skip]
|
||||
// macOS only: grabs one frame from an AVFoundation camera after letting exposure settle.
|
||||
// See SKILL.md for capture tools on other systems.
|
||||
import AVFoundation
|
||||
import AppKit
|
||||
import CoreImage
|
||||
|
||||
let args = CommandLine.arguments
|
||||
guard args.count >= 3 else {
|
||||
FileHandle.standardError.write("usage: camsnap <camera name> <out.jpg> [skip]\n".data(using: .utf8)!)
|
||||
exit(2)
|
||||
}
|
||||
let wanted = args[1].lowercased()
|
||||
let outPath = args[2]
|
||||
let skip = args.count > 3 ? Int(args[3]) ?? 30 : 30
|
||||
|
||||
let discovery = AVCaptureDevice.DiscoverySession(
|
||||
deviceTypes: [.external, .builtInWideAngleCamera], mediaType: .video, position: .unspecified)
|
||||
guard let device = discovery.devices.first(where: { $0.localizedName.lowercased().contains(wanted) }) else {
|
||||
let names = discovery.devices.map { $0.localizedName }.joined(separator: ", ")
|
||||
FileHandle.standardError.write("no camera matching '\(wanted)'; found: \(names)\n".data(using: .utf8)!)
|
||||
exit(1)
|
||||
}
|
||||
|
||||
final class Grabber: NSObject, AVCaptureVideoDataOutputSampleBufferDelegate {
|
||||
var seen = 0
|
||||
let skip: Int
|
||||
let out: String
|
||||
init(skip: Int, out: String) { self.skip = skip; self.out = out }
|
||||
func captureOutput(_ output: AVCaptureOutput, didOutput sampleBuffer: CMSampleBuffer,
|
||||
from connection: AVCaptureConnection) {
|
||||
seen += 1
|
||||
guard seen > skip, let pixels = CMSampleBufferGetImageBuffer(sampleBuffer) else { return }
|
||||
let image = CIImage(cvPixelBuffer: pixels)
|
||||
let rep = NSBitmapImageRep(ciImage: image)
|
||||
guard let jpeg = rep.representation(using: .jpeg, properties: [.compressionFactor: 0.9]) else {
|
||||
FileHandle.standardError.write("failed to encode \(out) as JPEG\n".data(using: .utf8)!)
|
||||
exit(1)
|
||||
}
|
||||
let url = URL(fileURLWithPath: out)
|
||||
try? FileManager.default.createDirectory(
|
||||
at: url.deletingLastPathComponent(), withIntermediateDirectories: true)
|
||||
do {
|
||||
try jpeg.write(to: url)
|
||||
} catch {
|
||||
FileHandle.standardError.write("failed to write \(out): \(error)\n".data(using: .utf8)!)
|
||||
exit(1)
|
||||
}
|
||||
print("saved \(out) after \(seen) frames")
|
||||
exit(0)
|
||||
}
|
||||
}
|
||||
|
||||
let session = AVCaptureSession()
|
||||
session.sessionPreset = .high
|
||||
guard let input = try? AVCaptureDeviceInput(device: device), session.canAddInput(input) else {
|
||||
FileHandle.standardError.write("cannot open \(device.localizedName)\n".data(using: .utf8)!)
|
||||
exit(1)
|
||||
}
|
||||
session.addInput(input)
|
||||
let output = AVCaptureVideoDataOutput()
|
||||
output.videoSettings = [kCVPixelBufferPixelFormatTypeKey as String: kCVPixelFormatType_32BGRA]
|
||||
let grabber = Grabber(skip: skip, out: outPath)
|
||||
output.setSampleBufferDelegate(grabber, queue: DispatchQueue(label: "camsnap"))
|
||||
session.addOutput(output)
|
||||
session.startRunning()
|
||||
DispatchQueue.main.asyncAfter(deadline: .now() + 15) {
|
||||
FileHandle.standardError.write("timed out waiting for frames\n".data(using: .utf8)!)
|
||||
exit(1)
|
||||
}
|
||||
RunLoop.main.run()
|
||||
@@ -1,43 +0,0 @@
|
||||
# Display test pattern: corner markers, centre reference and partial-update markers.
|
||||
# Replace the display platform and pins with the driver under test.
|
||||
esphome:
|
||||
name: display-pattern
|
||||
|
||||
esp32:
|
||||
board: esp32-s3-devkitc-1
|
||||
framework:
|
||||
type: esp-idf
|
||||
|
||||
logger:
|
||||
hardware_uart: USB_SERIAL_JTAG
|
||||
level: DEBUG
|
||||
|
||||
spi:
|
||||
clk_pin: GPIO11
|
||||
mosi_pin: GPIO12
|
||||
|
||||
display:
|
||||
- platform: st7305
|
||||
id: test_display
|
||||
cs_pin: GPIO40
|
||||
dc_pin: GPIO5
|
||||
reset_pin: GPIO41
|
||||
update_interval: 1s
|
||||
auto_clear_enabled: false
|
||||
lambda: |-
|
||||
static int frame = 0;
|
||||
if (frame == 0) {
|
||||
it.fill(Color::WHITE);
|
||||
it.rectangle(0, 0, it.get_width(), it.get_height(), Color::BLACK);
|
||||
it.filled_rectangle(it.get_width() / 2 - 10, it.get_height() / 2 - 10, 20, 20, Color::BLACK);
|
||||
} else if (frame == 1) {
|
||||
it.filled_rectangle(20, 20, 60, 20, Color::BLACK);
|
||||
it.filled_rectangle(20, 50, 20, 20, Color::BLACK);
|
||||
} else if (frame == 2) {
|
||||
it.filled_rectangle(20, it.get_height() - 40, 60, 20, Color::BLACK);
|
||||
} else if (frame == 3) {
|
||||
it.filled_rectangle(it.get_width() - 80, 20, 60, 20, Color::BLACK);
|
||||
} else if (frame == 4) {
|
||||
it.filled_rectangle(it.get_width() - 80, it.get_height() - 40, 60, 20, Color::BLACK);
|
||||
}
|
||||
frame++;
|
||||
@@ -93,15 +93,13 @@ ESP-IDF OTA image: `.esphome/build/<name>/build/firmware.ota.bin`. LibreTiny OTA
|
||||
- `ports.py`: list ports with VID:PID, product, serial and a board guess; `--wait VID[:PID]`,
|
||||
`--product NAME`, `--serial SN` (one specific board, whatever path it comes back under) and
|
||||
`--serial-of PORT` (the serial number behind a path).
|
||||
- `serial_capture.py PORT SECONDS OUT [--baud] [--released] [--reset] [--append] [--ms]`: bounded timestamped
|
||||
capture (`--ms` adds milliseconds for timing work), ANSI stripped, `LOG_SECRET` text written as `<secret>`, reopens a vanished port, exits at the
|
||||
- `serial_capture.py PORT SECONDS OUT [--baud] [--released] [--reset] [--append]`: bounded timestamped
|
||||
capture, ANSI stripped, `LOG_SECRET` text written as `<secret>`, reopens a vanished port, exits at the
|
||||
deadline. OUT is truncated unless `--append` is given, so counts over it cover one run.
|
||||
- `flash_rtl87xx_kit.py`: ltchiptool wrapper for the BW15 kit whose CH340 drives CEN (RTS) and the boot
|
||||
strap (DTR). `flash read` needs the family `realtek-ambz2`; `flash write` does not.
|
||||
- `flash_bk72xx.py`: ltchiptool wrapper for BK72xx boards whose RTS drives CEN. It misses the link now
|
||||
and then; retry up to three times.
|
||||
- `api_button.py HOST KEY list|press NAME [...]`: list a device's template buttons or press them over the API; the
|
||||
recipes drive their test configs with it.
|
||||
- `wifisave_hammer.sh KIND DUT_PORT DUT_YAML DUT_TREE CLIENT_PORT CLIENT_YAML CLIENT_TREE [SETTLE]`:
|
||||
the fallback AP plus captive portal hammer end to end (compile, flash, capture, counts) with the
|
||||
templates below. KIND is `esp`, `pico`, `bw15` or `bk`. It ends with `RESULT PASS` (exit 0),
|
||||
@@ -115,7 +113,7 @@ Per-topic scripts, each described in the matching `reference/recipes/<component>
|
||||
(host driver, Zephyr driver probe), `rtsp_server/` (protocol client, raw rate reader, measurement set,
|
||||
API image grab), `cse7766/` (API observer with ping), `zephyr_coredump/` (reader flow, decode with the
|
||||
Zephyr tools), `libretiny_prefs/` (rtc preference harness header), `libretiny_crash/` (BK72xx crash probe header and
|
||||
capture decoder), `api_outgoing/` (wake cycle and Wi-Fi drop timing readers), `ld2450/` (zone number driver), `dfrobot_sen0395/` (API driver and case runner), `homeassistant_light/` (direct bulb driver, held-report case driver), `usb_audio/` (URL player), `speaker_media_player/` (API player driver, pipeline task case runner), `web_server/` (SSE client, request mix, SSE and HTTPD case runners), `mqtt/` (broker config with TLS, client-certificate and WebSocket listeners, test CA with server and client certificates, transport case runner, flash-and-drive runner, CLI TLS check without a board), `udp/` (datagram recorder, `udp.write` payload checker and case driver), `entity_icons/` (icon and device class readback over the API, MQTT discovery, web_server and dump_config, with a comparer).
|
||||
capture decoder).
|
||||
|
||||
## Templates in `$SKILL/templates`
|
||||
|
||||
@@ -127,19 +125,11 @@ capture decoder), `api_outgoing/` (wake cycle and Wi-Fi drop timing readers), `l
|
||||
- Per-topic device configs, each described in `reference/recipes/<component>.md`: `online-image-dut.yaml`,
|
||||
`usb-cdc-acm-dongle-dut.yaml`, `nrf52-preferences-dut.yaml`, `rtsp-waveshare-s3-eth-dut.yaml`,
|
||||
`waveshare-s3-eth-camdiag.yaml`, `s31-cse7766-dut.yaml`, `nrf52-coredump-crash-dut.yaml`,
|
||||
`bk72xx-rtc-prefs-dut.yaml`, `bk72xx-crash-probe-dut.yaml`, `dut-ap-only-wipe-once-bk72xx.yaml`,
|
||||
`homeassistant-light-dut.yaml`, `deep-sleep-outgoing-dut.yaml`, `outgoing-wifi-drop-dut.yaml`,
|
||||
`globals-storage-dut.yaml`, `usb-audio-waveshare-s3-eth-dut.yaml`, `usb-audio-sendspin-s3-eth-dut.yaml`,
|
||||
`cast-pro-1-sendspin-control.yaml`, `aux-2-preprod-stock-dut.yaml`, `aux-2-preprod-usb-audio-dut.yaml`,
|
||||
`dfrobot-sen0395-dut.yaml`, `aux-2-preprod-speaker-player-dut.yaml`, `web-server-sse-dut.yaml`,
|
||||
`mqtt-transport-dut.yaml`, `mqtt-tls-dut.yaml`, `udp-write-dut.yaml`, `entity-icon-dut.yaml`.
|
||||
`bk72xx-rtc-prefs-dut.yaml`, `bk72xx-crash-probe-dut.yaml`, `dut-ap-only-wipe-once-bk72xx.yaml`.
|
||||
|
||||
## When something looks wrong
|
||||
|
||||
- A capture stopped early or a line is missing: check the timestamps before trusting it.
|
||||
- A script that pipes into `tee` never ends although its work is done: a background command written as
|
||||
`(cd dir && server & echo $!)` backgrounds the whole `cd && server` list, so a shell stays behind holding the
|
||||
pipe open and `$!` is that shell, not the server. Write `(cd dir && exec server > out 2>&1 < /dev/null) &`.
|
||||
- The client never joins the AP: another board may still run an AP with the same SSID, or the device
|
||||
booted with saved credentials because the name was reused. One AP device at a time on the bench.
|
||||
- Builds come out byte-identical between branches: the wrong tree was imported (rule 3). The reverse
|
||||
@@ -149,10 +139,6 @@ capture decoder), `api_outgoing/` (wake cycle and Wi-Fi drop timing readers), `l
|
||||
preference and repeat it in a periodic alive line, as `scripts/libretiny_prefs/ltprefs.hpp` does.
|
||||
- Multicast from the host never arrives on some access points: test it device to device. Broadcast
|
||||
is lossy under Wi-Fi power save, unicast is not. Throttle UDP floods to a fixed packet rate.
|
||||
- The merge base comes from a freshly fetched `origin/dev`; a stale local `dev` puts dependency bumps into the
|
||||
PR diff and builds the control from the wrong commit.
|
||||
- A `.local` name can stop resolving in the middle of a run; keep the address from the boot log and drive by it.
|
||||
- `wc -l` pads its count on macOS, so `tail -n +$n0` needs `$((n0+0))` or an arithmetic expansion.
|
||||
- `api:` reboots a board after 15 min without a client: `reboot_timeout: 0s` on `api:` and `mqtt:` for
|
||||
soak tests.
|
||||
|
||||
|
||||
@@ -4,29 +4,23 @@ Each flow names the pull requests it was used on, so their result tables show wh
|
||||
|
||||
One file per component, named after it:
|
||||
|
||||
- [`api.md`](api.md): noise handshake and OTA encryption on the ESP8266, outgoing connection wake timing on deep sleep and after a Wi-Fi drop
|
||||
- [`api.md`](api.md): noise handshake and OTA encryption on the ESP8266
|
||||
- [`captive_portal.md`](captive_portal.md): fallback AP and /wifisave hammer
|
||||
- [`cse7766.md`](cse7766.md): Sonoff S31 parser check over the API
|
||||
- [`espnow.md`](espnow.md): ESP8266 broadcast receive
|
||||
- [`hdmi_cec.md`](hdmi_cec.md): two-board wire
|
||||
- [`ld2450.md`](ld2450.md): polygon zones, zone number round trip through the radar's readback
|
||||
- [`ld2450.md`](ld2450.md): polygon zones
|
||||
- [`libretiny.md`](libretiny.md): rtc preference emulation, BK72xx crash report on the next boot
|
||||
- [`mqtt.md`](mqtt.md): broker bench, QoS, reconnect, crash log over MQTT, WebSocket transports with a local and a public broker, TLS trust sources (own CA, client certificate, certificate bundle, no verification) with the CLI check
|
||||
- [`mqtt.md`](mqtt.md): broker bench, QoS, reconnect, crash log over MQTT
|
||||
- [`nrf52.md`](nrf52.md): dongle board support
|
||||
- [`online_image.md`](online_image.md): stalled and malformed downloads
|
||||
- [`openthread.md`](openthread.md): border router on the S3 host plus H2 RCP
|
||||
- [`ota.md`](ota.md): overlap and lock, timeouts, deflate
|
||||
- [`rtsp_server.md`](rtsp_server.md): camera streaming on the Waveshare ESP32-S3-ETH
|
||||
- [`scheduler.md`](scheduler.md): loop wake A/B
|
||||
- [`udp.md`](udp.md): datagrams, multicast, sockets, `udp.write` payload shapes
|
||||
- [`udp.md`](udp.md): datagrams, multicast, sockets
|
||||
- [`usb_cdc_acm.md`](usb_cdc_acm.md): nRF52840 dongle host driver
|
||||
- [`wifi.md`](wifi.md): reboot_timeout with a fallback AP, DHCP lease cache, Easy Connect (DPP)
|
||||
- [`zephyr.md`](zephyr.md): preferences on the nRF52840 dongle
|
||||
- [`zephyr_coredump.md`](zephyr_coredump.md): crash and decode on nRF52 boards
|
||||
- [`zwave_proxy.md`](zwave_proxy.md): frame checksums on a live proxy
|
||||
- [`globals.md`](globals.md): restoring globals with storage rtc and flash across every reset kind
|
||||
- [`homeassistant.md`](homeassistant.md): light platform mirrored from a local Home Assistant, held reports versus later calls
|
||||
- [`usb_audio.md`](usb_audio.md): USB audio speaker and microphone, the usb_host FIFO split, and Music Assistant playback through sendspin
|
||||
- [`dfrobot_sen0395.md`](dfrobot_sen0395.md): SEN0395 mmWave command flow, module quirks and overlong lines through its error reply
|
||||
- [`speaker.md`](speaker.md): media player pipeline tasks on the Connect AUX-2 with the `speaker` platform player
|
||||
- [`web_server.md`](web_server.md): state SSE stress and the HTTPD task stack on web_server_idf, entity icon and device class readback
|
||||
|
||||
@@ -5,26 +5,3 @@
|
||||
Host side timing is useless on a weak link; use an on-device bench with the minimum of five runs over
|
||||
two boots. Provision a key with `noise_encryption_set_key` through aioesphomeapi and upload with
|
||||
`espota2.run_ota(host, 8266, None, bin, noise_psk=key)` when the key is not in the yaml.
|
||||
|
||||
## Outgoing connection wake timing on a deep sleep build (#21077)
|
||||
|
||||
`templates/deep-sleep-outgoing-dut.yaml`: classic ESP32 ESP-IDF, `wifi: fast_connect`, `api: encryption` with a bare
|
||||
`outgoing_connection:`, `deep_sleep` 15 s run and 15 s sleep, a `homeassistant` text sensor, and `millis()` logged
|
||||
from `wifi: on_connect`, `api: on_client_connected` and the sensor's first `on_value`. Home Assistant's dial-in
|
||||
listener is on 6054; reuse a device name it already has. Flash by USB, `serial_capture.py PORT 360 OUT --reset` for
|
||||
12 cycles, then `scripts/api_outgoing/cycles.py OUT LABEL` prints per cycle the wifi, client and state millis with
|
||||
the client-wifi and state-client gaps. Wi-Fi takes 4 to 8 s after a wake, so compare the client-wifi gap, and run
|
||||
the PR twice around one base run because the spread is a few hundred ms.
|
||||
Results: https://github.com/esphome/esphome/pull/21077#issuecomment-6254098014
|
||||
|
||||
## Outgoing connection on a mains build after a Wi-Fi drop (#21085)
|
||||
|
||||
`templates/outgoing-wifi-drop-dut.yaml`: classic ESP32, `outgoing_connection: delay: 2s`, a "Wifi cycle" button doing
|
||||
`wifi.disable`, 4 s, `wifi.enable`, a `debug` loop-time sensor, millis from the wifi and api triggers. Flash by USB,
|
||||
`serial_capture.py PORT SECONDS OUT --ms`, press the button N times 40 s apart with `api_button.py DEV_IP KEY press
|
||||
"Wifi cycle"`, then `wificycles.py CAPTURE LABEL` prints per drop the Wi-Fi-to-dial gap, dials and dials closed, who
|
||||
connected first, and the loop-time maxima. For the loop cost of polling, repeat with an unreachable
|
||||
`host: 192.0.2.1`. Home Assistant refuses a dial-in while its own session is READY (`Refusing dial-in adoption`),
|
||||
so after a drop every dial is closed and HA's incoming reconnect wins 11 to 33 s later; the measurable effect is the
|
||||
first dial landing in the loop the network flag flips.
|
||||
Results: https://github.com/esphome/esphome/pull/21085#issuecomment-6254742791
|
||||
|
||||
@@ -1,21 +0,0 @@
|
||||
# dfrobot_sen0395
|
||||
|
||||
## DFRobot SEN0395 mmWave on an ESP32 DevKit V1 (#20906, #20979)
|
||||
|
||||
Wiring: V to VIN (5 V, the module wants 3.6 to 5 V), G to GND, sensor TX to GPIO16 (RX2), sensor RX to GPIO17
|
||||
(TX2), IO2 to GPIO18 (presence output, a gpio binary sensor), I1 unconnected. `templates/dfrobot-sen0395-dut.yaml`
|
||||
has the hub, both detection binary sensors, the four switches, settings buttons and junk-line buttons.
|
||||
`scripts/dfrobot_sen0395/ctl.py HOST KEY press:NAME sw:NAME=on|off wait:S` drives it and prints binary sensor and
|
||||
switch updates; `cases.sh DEV_IP KEY CAPTURE LABEL` runs the whole flow against a running serial capture. Flash by
|
||||
USB, `serial_capture.py PORT 540 CAPTURE --reset`, then the cases; compare the `Sending command` and `Message:` lines
|
||||
and the counts of `Done`, `Error`, prompts and frames between builds. The module echoes every command, so the echoed
|
||||
lines are the bytes the component sent and can be compared between builds as a set.
|
||||
|
||||
Module facts: it answers `Done` or `Error` and then the `leapMMW:/>` prompt without a line end; a junk line gets
|
||||
`<line> is not recognized as a CLI command` (36 chars longer than the line, so 220 and 240 byte junk gives 256 and
|
||||
276 char replies); input lines of 256 bytes or more make the module assert (`..\User_code\main.c line:232`) and
|
||||
restart, after which the sensor is stopped; a factory reset restarts the module about 7 s later; `sensorStop` on a
|
||||
stopped sensor answers `sensor stopped already` then `Error`; a settings press takes 5 to 6 s (stop, change, save,
|
||||
start). Free heap on the ESP32 is Wi-Fi noise (192 to 198 kB) and says nothing about the component.
|
||||
Results: https://github.com/esphome/esphome/pull/20979#issuecomment-6279129146 and
|
||||
https://github.com/esphome/esphome/pull/20906#issuecomment-6279129604
|
||||
@@ -1,15 +0,0 @@
|
||||
# globals
|
||||
|
||||
## Restoring globals with storage: rtc and flash (#13954)
|
||||
|
||||
`templates/globals-storage-dut.yaml` is the shared package: five restoring globals (rtc int, flash int, default int,
|
||||
rtc `std::string`, rtc `uint8_t[2]`), bumped and logged with the reset reason on every boot, saved and synced after
|
||||
2 s, odd boots `App.safe_reboot()`. Platform files add the board (`packages: dut: !include globals-storage-dut.yaml`), the `debug` reset-reason text sensor and, on the
|
||||
ESP32, `deep_sleep: run_duration: 12s, sleep_duration: 8s` (even boots sleep). No network needed: flash by USB,
|
||||
`serial_capture.py PORT 110 OUT --reset` gives the reset pulse plus a run of soft restarts and sleeps; the ESP32's
|
||||
EN pulse is a `POWERON_RESET` that empties RTC memory, the D1 mini's RST pulse (`rst cause:2`) keeps it, so the
|
||||
ESP8266 needs a real power cut by hand; arm long `--released` captures on both ports first (the capture
|
||||
reopens the port when it comes back, the very first boot lines are still lost, read the next boot's restored
|
||||
values). Unchanged-build check: the config with every `storage:` removed, built on the PR and on the dev merge
|
||||
commit under the PR's own commits (not the merge base, which is older dev), `cmp -l` plus an `nm -S` symbol diff;
|
||||
only the template names differ. Results: https://github.com/esphome/esphome/pull/13954#issuecomment-6254794712
|
||||
@@ -1,47 +0,0 @@
|
||||
# homeassistant
|
||||
|
||||
## homeassistant light platform against a local Home Assistant (#11354)
|
||||
|
||||
A local Home Assistant dev install (`hass -c config`, https://127.0.0.1:8123 with a self-signed cert); its ESPHome
|
||||
entries and entity ids are in `config/.storage/`. Two ESPHome RGBCW bulbs with a plaintext API are the lights, so an
|
||||
"HA side" change is made directly on a bulb with `scripts/homeassistant_light/bulb.py BULB_IP - on|off|state|restart`.
|
||||
Add the test devices to HA by hand with the shared `api_key` and "Allow the device to perform Home Assistant actions".
|
||||
|
||||
`templates/homeassistant-light-dut.yaml` is a package: two mirrors, buttons for each change, a "Log state" button, a
|
||||
30 s alive line, an `on_boot` `light.turn_on` for the change-before-first-write path, and VERBOSE logging with the
|
||||
noisy tags at DEBUG (a tag cannot exceed the global level). A platform file sets the board and includes it:
|
||||
|
||||
```yaml
|
||||
esphome:
|
||||
name: ha-light-dut
|
||||
esp32:
|
||||
board: esp32dev
|
||||
framework:
|
||||
type: esp-idf
|
||||
packages:
|
||||
dut: !include homeassistant-light-dut.yaml
|
||||
```
|
||||
|
||||
Flash by USB, start a bounded `esphome logs` capture per device, then press buttons with
|
||||
`scripts/api_button.py DEV_IP KEY press "Button"` and read the bulb with `bulb.py`. Cases: each
|
||||
button against the bulb and the device log; a direct bulb change that both mirrors follow; restart the bulb, send a
|
||||
change, expect the 5 s `did not report the change back` and the fallback (with an off and with an on last report);
|
||||
OTA reboot with a serial capture running to see the boot-time change (the API log client reconnects too late).
|
||||
|
||||
Lessons: the light core clamps mireds to the range HA reported; a flash sends nothing; a change sent while HA is
|
||||
connected but not yet subscribed is dropped by the api server (`client has not subscribed to actions (yet)`); after a
|
||||
fallback to an off report the mirror keeps the unsent brightness; a mirror that never saw its light on since boot has
|
||||
no levels to restore. Results: https://github.com/esphome/esphome/pull/11354#issuecomment-6253630336 and
|
||||
https://github.com/esphome/esphome/pull/11354#issuecomment-6254161409
|
||||
|
||||
## Held report versus a later call (#21144)
|
||||
|
||||
A report that arrives during a transition is held and applied when the transition ends, unless a call came after
|
||||
it. `scripts/homeassistant_light/heldcase.py DEV_IP KEY BULB_IP same|many [BULB_KEY]` (a key of `-` is plaintext) keeps one API connection to the mirror
|
||||
device and one to the bulb so the steps land inside a 3 s fade: press "A 50 fade 3s", 0.7 s later set the bulb to
|
||||
90% directly (the report is held), 1.4 s in press the same fade again (or "A many calls", 16 calls in one loop
|
||||
pass). Pass: the mirror and the bulb end at the second call's target. Only `same` reproduces the bug: a build
|
||||
without the fix logs `Applying the report that arrived during the transition` and the bulb stays at 90%. `many`
|
||||
ends at 100% on both builds because the last call's target differs from the held report, so it is a regression
|
||||
check only, not a reproduction. Separate button presses are too slow (about 1.5 s each) to land inside the fade.
|
||||
The mirrors are not API entities, so read their state from the "Log state" button's line. Results: https://github.com/esphome/esphome/pull/21144#issuecomment-6278257695
|
||||
@@ -5,11 +5,3 @@
|
||||
To make a target "leave" without anyone moving, set the radar's Zone-1 numbers over the target and
|
||||
switch the zone type to `Filter` (the count drops to 0 within 0.5 s); set it back to `Disabled` after.
|
||||
Writing those numbers blocks the ld2450 loop about 50 ms.
|
||||
|
||||
## Zone numbers round trip (#21146)
|
||||
|
||||
`scripts/ld2450/zonedrive.py HOST KEY(- for plaintext) set:NAME=VALUE sel:NAME=OPTION wait:S list` sets numbers and
|
||||
selects over the API and prints every LD2450 state update. After each set the hub sends the set zone command, queries
|
||||
the radar and republishes all twelve coordinates from the answer, so set each coordinate of each zone to a distinct
|
||||
value and check the readbacks; no target is needed. Readbacks can arrive late over Wi-Fi, so match them by content.
|
||||
Results: https://github.com/esphome/esphome/pull/21146#issuecomment-6278026922
|
||||
|
||||
@@ -10,44 +10,3 @@ after bulk subscribe and unsubscribe; read the heap seconds later over several r
|
||||
leak. Spawned subscriptions need about 2.5 s to reach the broker before the next publish.
|
||||
`esphome logs --device MQTT` only uses the MQTT transport when the config has no `api:`. Driver pattern: a
|
||||
paho script publishes and polls the serial capture file.
|
||||
|
||||
## WebSocket transports on ESP-IDF (#16056)
|
||||
|
||||
One build per transport from `templates/mqtt-transport-dut.yaml`, with `scripts/mqtt/mosquitto-ws.conf` as the
|
||||
local broker (mosquitto 2.x from brew has `websockets` support; `log_type all` prints `New connection from <ip>:<port>
|
||||
on port <listener>`, which proves which listener each client used) and `scripts/mqtt/make_test_ca.sh BROKER_IP` for
|
||||
the TLS listener's certificate, both run in the scratch directory so keys, logs and outputs stay out of the checkout. `scripts/mqtt/cases.sh NAME KEY BROKER_HOST SUB_PORT CAPTURE [DEV_HOST] [restart]` subscribes
|
||||
to `NAME/#`, sends a switch command and an `on_message` topic, presses the 3000 byte publish button over the API,
|
||||
restarts the local broker when the last argument is `restart` (the PID in `mosquitto.pid`, written when the broker
|
||||
was started with `mosquitto -c mosquitto-ws.conf & echo $! > mosquitto.pid` in the working directory next to the
|
||||
certificates), checks every listener in the broker config answers again, and prints the broker's message counts with the device log. `mosquitto_sub` cannot speak
|
||||
WebSocket, so it subscribes on the plain listener of the same broker. Cases: `tcp` on 1883, `ws` on 9001, `wss` on
|
||||
9002 with `certificate_authority` (the certificate names an address, so `skip_cert_cn_check: true`), `wss` to
|
||||
test.mosquitto.org on 8081 with no CA for the certificate bundle, and two negatives that must never connect: a
|
||||
different CA (`mbedtls_ssl_handshake returned -0x2700`) and the self-signed server through the bundle
|
||||
(`esp-x509-crt-bundle: Failed to verify certificate`, `-0x3000`). `CONFIG_MQTT_TRANSPORT_WEBSOCKET` is on by
|
||||
default in the generated sdkconfig. The TLS session costs about 29 kB of internal heap while connected; the public
|
||||
broker carries other devices' `esphome/discover` traffic, which is noise. Results:
|
||||
https://github.com/esphome/esphome/pull/16056#issuecomment-6301034019
|
||||
|
||||
## TLS trust sources on ESP-IDF (#14318)
|
||||
|
||||
One build per trust source from `templates/mqtt-tls-dut.yaml`: broker only (port must resolve to 1883),
|
||||
`certificate_authority` with no port (must resolve to 8883), `verify_ssl: false` with no CA, the CA plus
|
||||
`client_certificate` and `client_certificate_key` on the 8884 listener that requires one, `transport: wss` with the CA,
|
||||
`tls: true` to test.mosquitto.org on 8886 for the certificate bundle, and `tls: true` to the local self-signed broker as
|
||||
the negative. `scripts/mqtt/mosquitto-ws.conf` now has the 8883 and 8884 listeners and `scripts/mqtt/make_test_ca.sh`
|
||||
also writes `client.crt`/`client.key`. Before flashing, check each build's `src/esphome/core/defines.h` for
|
||||
`USE_MQTT_TLS`, `USE_MQTT_CERT_BUNDLE` and `USE_MQTT_TLS_INSECURE` and its `sdkconfig.<name>` for
|
||||
`CONFIG_MBEDTLS_CERTIFICATE_BUNDLE` and `CONFIG_ESP_TLS_INSECURE`: only the bundle builds may carry the bundle and only
|
||||
the unverified build the insecure flags. `scripts/mqtt/flash_and_drive.sh TREE YAML PORT KEY BROKER_HOST
|
||||
local|public|neg` runs one build end to end (flash, bounded capture, `cases.sh` with a restart for the local broker,
|
||||
counts and the broker's per-listener connection lines) and prints the config dump's `TLS:` line (`CA certificate`,
|
||||
`certificate bundle` or `no verification`). The CLI side (`esphome/mqtt.py`) is covered without a board by
|
||||
`scripts/mqtt/cli_tls_check.sh TREE [neg] YAML...`, which runs `esphome clean-mqtt` under a timeout: status 124
|
||||
after `Connected to MQTT broker!` is a pass, and with `neg` each config must instead fail with
|
||||
`CERTIFICATE_VERIFY_FAILED` and never connect. Python's default SSL
|
||||
context rejects a CA that lacks a `keyUsage` extension (`CA cert does not include key usage extension`) while mbedTLS
|
||||
on the device accepts it, which is why the test CA carries `basicConstraints` and `keyUsage`. A broker kill shows as one
|
||||
`Last esp-tls error: 0x8008` on every build, TLS or not. Results:
|
||||
https://github.com/esphome/esphome/pull/14318#issuecomment-6311863827
|
||||
|
||||
@@ -1,19 +0,0 @@
|
||||
# speaker
|
||||
|
||||
## Media player pipeline tasks (#21203)
|
||||
|
||||
The `speaker` media player platform (`speaker/media_player/`) creates `ann_read`, `ann_decode`, `med_read` and
|
||||
`med_decode` FreeRTOS tasks on every play and deletes them after a stop. The AUX-2 and sendspin packages use the
|
||||
`speaker_source` player instead, which has its own pipeline and never runs that code, so a test of
|
||||
`speaker/media_player/*` has to swap the player: `templates/aux-2-preprod-speaker-player-dut.yaml` removes the
|
||||
package's `external_media_player` with `id: !remove` and adds a `speaker` platform player on the package's resampler
|
||||
speakers, plus a "Task names" button whose lambda calls `xTaskGetHandle()` on the four names and logs internal free
|
||||
heap. Serve FLAC files from the host (`ffmpeg -f lavfi -i "sine=frequency=440:duration=90" -ac 2 -ar 48000 -c:a flac
|
||||
media90.flac`, a 3 s mono one for announcements, `python3 -m http.server 8765 --directory www`); `audio_http`
|
||||
refuses WAV and MP3. `scripts/speaker_media_player/cases.sh HOST KEY MEDIA_URL ANN_URL CAPTURE LABEL` runs three
|
||||
cycles through `drive.py` (`play:URL | ann:URL | stop | press:NAME | wait:S` on one API connection) with the probe
|
||||
pressed idle, during media, during the announcement, after it and after the stop. Pass: idle none, media `med_*`
|
||||
only, announcement all four, after stop none, every cycle. API commands land a second or two late over Wi-Fi, so read
|
||||
the probe against the `State changed to` lines rather than the driver's timestamps. Internal free heap after a stop
|
||||
moved by 2.5 kB between two boots of the same build, so a heap delta needs more than one boot per build. Results:
|
||||
https://github.com/esphome/esphome/pull/21203#issuecomment-6299581943
|
||||
@@ -9,18 +9,3 @@ listener. Broadcast to boards is lossy under power save, unicast is not. Flood a
|
||||
reconnect on the Pico keeps IGMP membership. Set a long loop interval from `wifi.on_connect`
|
||||
(`App.set_loop_interval(20000)`), not `on_boot`, or Wi-Fi connect crawls. The `logger.log` action
|
||||
rejects `%.*s`; use a lambda.
|
||||
|
||||
## udp.write payload shapes (#21263, ApplyBytes)
|
||||
|
||||
`templates/udp-write-dut.yaml` puts every payload shape behind a template button (constant 4 bytes twice, 3, 9, 0,
|
||||
128, 129 and 600 bytes, a 300 byte lambda, a simple value, a string) plus an `on_receive` that replies with the
|
||||
received bytes reversed. `scripts/udp/write_cases.sh DEVICE_IP KEY` records the device's datagrams with
|
||||
`udp_listen.py` on the test host, presses the buttons two seconds apart, sends one unicast datagram for the echo and
|
||||
compares everything byte for byte with `check.py`; a missing datagram shifts every later one, so read the first
|
||||
mismatch. Before flashing, check the generated `main.cpp`: on ESP8266 a constant payload is copied out of its
|
||||
`PROGMEM` table into `uint8_t esphome__bytes[N]` up to the stack limit and into `std::make_unique<uint8_t[]>` beyond,
|
||||
identical payloads share one table, a lambda is sent from its vector. An empty constant payload is generated as
|
||||
`send_packet(nullptr, 0)`, and the raw lwIP UDP `sendto` used on ESP8266 rejected a null buffer with `EINVAL`
|
||||
(`sendto() error 22` in the log, no datagram) until it accepted `nullptr` with a zero length; the old
|
||||
`TemplatableBytes::visit` had passed a zero length stack buffer instead. Compare sizes against the stacked PR's own
|
||||
head when the PR is stacked, not against dev. Results: https://github.com/esphome/esphome/pull/21263
|
||||
|
||||
@@ -1,52 +0,0 @@
|
||||
# usb_audio
|
||||
|
||||
## USB audio on the Waveshare ESP32-S3-ETH (#21081, #11728)
|
||||
|
||||
`templates/usb-audio-waveshare-s3-eth-dut.yaml`: ESP-IDF, PoE, logs over the API on Ethernet (the native USB port is
|
||||
the host port, so there is no console), `usb_audio` hub, a 48 kHz 16-bit microphone, a 48 kHz 24-bit speaker (many
|
||||
speakerphones offer only 24-bit; a wrong format logs the device's alternates), buttons for capture start and stop,
|
||||
a non-blocking beep fed from an 8 ms interval with `play(buf, len, 0)` (a blocking `play()` on the main loop trips
|
||||
the task watchdog), and a status interval with mic bytes, speaker state and heap. Drive the buttons with
|
||||
`scripts/api_button.py IP KEY press "Beep"`. Expect 192 kB/s microphone bytes and the FIFO split
|
||||
RX 80 / NPTX 16 / PTX 104 in the build's `defines.h`; with the balanced split the 294-byte OUT pipe is refused
|
||||
(`EP MPS (294) exceeds supported limit (128)`). A device whose OUT endpoint is larger than 600 bytes cannot be
|
||||
claimed on an S3 at all.
|
||||
|
||||
## Music Assistant through sendspin
|
||||
|
||||
`templates/usb-audio-sendspin-s3-eth-dut.yaml` overlays the template above with the Apollo CAST-1 wiring: resampler
|
||||
speakers into a mixer whose inputs never time out, `speaker_source` media player with the sendspin source, and
|
||||
`sendspin: unpaired_access: true`. A `media_player: platform: speaker` is not a media-source consumer and gives
|
||||
"Player over its buffer", no audio. Music Assistant finds the device by mDNS within 15 s of boot.
|
||||
|
||||
Read the result from the device, not only by ear: sendspin's sync task logs `Lost sync (N us off)` (DEBUG, tag
|
||||
`SsSync`) for every correction over 5 ms, a positive N inserts that much silence, and each one is an audible click.
|
||||
For the chunk lead histogram, edit the managed library in the build directory,
|
||||
`.esphome/build/<name>/managed_components/sendspin__sendspin-cpp/src/sync_task.cpp` (an `SS_LOGD` before the
|
||||
late-chunk skip in `decode_chunk()` printing the chunk's lead against `new_audio_client_playtime`), update only that
|
||||
file's `size` and sha256 `hash` in the component's `CHECKSUMS.json`, and compile again; deleting `.component_hash` or
|
||||
recomputing it makes the manager refuse or refetch. Check the edit is in the image with `strings firmware.ota.bin`.
|
||||
A lead below -5 ms makes the library skip the whole chunk; an I2S speaker keeps it within 0.1 ms of zero, which is
|
||||
the figure a USB speaker has to match.
|
||||
|
||||
Gotchas: wait two minutes after a reboot before the measured stream (safe mode's boot counter write stalls the cores
|
||||
for about 140 ms once, 60 to 75 s after boot); with the serial console on, a DEBUG log line per report saturates
|
||||
UART0 and trips the task watchdog, so use `logger: baud_rate: 0` and the API log; two overlapping `esphome logs`
|
||||
captures double every count; and every audio test must include a pause and resume cycle, since a stream end that
|
||||
leaves less than one transfer parked in the driver was what hung the speaker after #11728 merged.
|
||||
|
||||
## Controls
|
||||
|
||||
Apollo CAST PRO-1 (`templates/cast-pro-1-sendspin-control.yaml`): `Core.yaml` next to it is
|
||||
`Integrations/ESPHome/Core.yaml` from ApolloAutomation/CAST_PRO-1, which also defines the `version` substitution.
|
||||
Keep its framework log level at ERROR (DEBUG floods driver output and trips the watchdog); the package reboots itself
|
||||
into Ethernet-only once it sees a link and appends the MAC suffix to the name. `wifi: enable_on_boot: false` keeps
|
||||
sendspin off Wi-Fi.
|
||||
|
||||
Nabu Casa Connect AUX-2 (a pre-production unit): build from `packages/aux-2-pre-prod.yaml` at NabuCasa/aux-2 commit
|
||||
283f2e64 (dropped in bde41e01), not the public `aux-2.yaml`, whose W5500, codec and I2S pins differ (the public one
|
||||
reads W5500 chip ID 0x00 and fails the codec's I2C writes). Point its local `external_components` source at
|
||||
`github://NabuCasa/aux-2@main`. Templates `aux-2-preprod-stock-dut.yaml` (I2S codec) and
|
||||
`aux-2-preprod-usb-audio-dut.yaml` (the USB speaker as the mixer output via `!extend mixing_speaker`). The console is
|
||||
the CH343 (1a86:55d3); first flash over it, OTA after. Forcing the Wi-Fi flag off with `restore_value: no` boot-loops
|
||||
when Ethernet fails, so let the package switch itself.
|
||||
@@ -1,60 +0,0 @@
|
||||
# web_server
|
||||
|
||||
## State SSE on web_server_idf (#21109) and the HTTPD task stack (#21038)
|
||||
|
||||
`templates/web-server-sse-dut.yaml` (ESP32 classic, ESP-IDF, `web_server` version 3) publishes eight sensors every
|
||||
200 ms (small state events on the 1024 byte stack buffer) and three text sensors whose JSON carries the string twice
|
||||
(`value` and `state`): 600 chars for about 1.3 kB (the 2048 byte tail), 1800 chars for about 3.7 kB (tail grown to
|
||||
4096) and 2800 chars for about 5.7 kB, over the 5120 byte JSON room, which must log `State event does not fit`
|
||||
and never put a truncated frame on the wire. An `interval` lambda logs `uxTaskGetStackHighWaterMark()` of the loop
|
||||
task (`nullptr`) and of the HTTPD task (`xTaskGetHandle("httpd")`) every 5 s; the ESPHome loop task is `loopTask`
|
||||
on ESP32. Keep `power_save_mode: none`, and drive the device by address: mDNS names dropped out mid-run once.
|
||||
|
||||
`scripts/web_server/sse.py HOST SECONDS [--clients N] [--stall] [--churn CYCLES]` opens raw TCP connections to
|
||||
`/events`, decodes the chunked body and parses every `state` event as JSON; `--stall` adds a connection with a 2 kB
|
||||
receive buffer that never reads (the device must log `Closing stuck EventSource connection` after the 20 s stall
|
||||
timeout), `--churn` opens and resets a connection CYCLES times. `sse_cases.sh HOST KEY LABEL CAPTURE` runs the
|
||||
set: 1 client 60 s, 4 clients 60 s, a reader plus a stalled client 45 s, a reader plus 10 abrupt closes, then two
|
||||
clients with the "Burst" button (50 sensor and 50 text publishes in one loop pass). Pass: 0 invalid JSON on every
|
||||
client, the oversize sensor dropped with its warning on every publish, the stalled session closed after about
|
||||
20 s, no reset. The loop task watermark is a minimum since boot, so compare the value after the first client, after
|
||||
four clients and after the burst between the builds (the SSE split in #21109 left 1280 B more on the ESP32 classic).
|
||||
|
||||
For the HTTPD task, `web_server: auth: type: digest` (the default `auth` is Basic) and
|
||||
`scripts/web_server/httpd_cases.sh HOST USER PASS LABEL CAPTURE`: `httpmix.sh` sends a `curl --anyauth` request
|
||||
mix per round (page, `/sensor/<Name>`, `/text_sensor/<Name>`, `/switch/<Name>`, a `POST` with `Content-Length: 0`
|
||||
to `/switch/<Name>/toggle`, an unknown path, which the IDF server closes without a response, an unauthenticated
|
||||
request answered 401, and a 2 s `/events` stream), 20 rounds alone and 12 rounds next to two `ssecurl.sh` SSE
|
||||
clients. Entity URLs use the entity name, URL encoded, not an object id. The HTTPD watermark follows the deepest
|
||||
request of the boot; compare after the mix and after the SSE round, with two boots when the numbers are close.
|
||||
Results: https://github.com/esphome/esphome/pull/21109#issuecomment-6300582328 and
|
||||
https://github.com/esphome/esphome/pull/21038#issuecomment-6301310182
|
||||
|
||||
## Entity icon and device class readback (#21111)
|
||||
|
||||
Covers every path that reads an entity's icon or device class: the native API listing, MQTT discovery, the web_server
|
||||
`/events` listing and REST endpoints, and `dump_config`. `templates/entity-icon-dut.yaml` (ESP8266 board with wifi,
|
||||
encrypted api, ota, web_server and mqtt against a local broker) carries a sensor with a 63 character icon, one with no
|
||||
icon or device class, an internal sensor, and binary_sensor, switch, button, text_sensor, number, select, event, cover
|
||||
and text entities with icons and device classes. The per-run file supplies `name` and `broker_ip` through
|
||||
substitutions. Flash the PR and base builds under different names, then from the scratch directory:
|
||||
|
||||
```sh
|
||||
scripts/entity_icons/readback.sh DEVICE_IP KEY NAME BROKER_HOST cap-NAME.txt # once per build
|
||||
scripts/entity_icons/compare.sh ic-base ic-pr # api, web, mqttn, dump all identical
|
||||
```
|
||||
|
||||
`readback.sh` takes about 25 s once the device is on the network: 12 s of `mosquitto_sub` on `homeassistant/#` and
|
||||
`NAME/#`, the API listing (`api_list.py`, one JSON line per entity with icon, device class, unit, options and event
|
||||
types) and `web_dump.py` (6 s on `/events`, keeping only the listing rows that carry `domain`, then a GET of each
|
||||
listed id with `?detail=all` and one retry, because the ESP8266 async server occasionally leaves a request unanswered
|
||||
within 5 s). The web ids are `domain/Name`, not object ids, and `/event/<name>` has no GET handler (404 on every
|
||||
build). `mqtt_norm.py` drops the `dev` block (compile time) and the `NAME/debug` topic (heap probe), so a clean run
|
||||
differs in nothing. `dump_config` prints icons and device classes only for some domains; button, event and
|
||||
binary_sensor icons never appear there.
|
||||
|
||||
Found with this flow on 2026-10-21: since #19577 every ESP8266 `web_server` build that lists a cover, climate, lock,
|
||||
valve, update, alarm_control_panel or water_heater entity reboots with `Exception (3) LoadStoreErr` in
|
||||
`json::linked(const char *)` (the ROM `strlen` on a flash address), fixed by #21316. The cover in the template keeps
|
||||
that path covered; before #21316 is merged, apply its one line change to both trees or the web_server comparison
|
||||
cannot run.
|
||||
@@ -1,33 +0,0 @@
|
||||
"""Press a template button on the test device over the API, or list its buttons.
|
||||
|
||||
usage: api_button.py HOST KEY list | press "Button name" [...] (KEY of - means a plaintext API)
|
||||
"""
|
||||
|
||||
import asyncio
|
||||
import sys
|
||||
|
||||
from aioesphomeapi import APIClient, ButtonInfo
|
||||
|
||||
HOST, KEY = sys.argv[1], sys.argv[2]
|
||||
CMD, ARGS = sys.argv[3], sys.argv[4:]
|
||||
|
||||
|
||||
async def main() -> None:
|
||||
c = APIClient(HOST, 6053, None, noise_psk=None if KEY == "-" else KEY)
|
||||
await c.connect(login=True)
|
||||
ents, _ = await c.list_entities_services()
|
||||
buttons = {e.name: e for e in ents if isinstance(e, ButtonInfo)}
|
||||
if CMD == "list":
|
||||
print("\n".join(sorted(buttons)))
|
||||
else:
|
||||
for name in ARGS:
|
||||
if name not in buttons:
|
||||
sys.exit(f"no button named {name!r}; have {sorted(buttons)}")
|
||||
c.button_command(buttons[name].key)
|
||||
print("pressed", name)
|
||||
await asyncio.sleep(0.3)
|
||||
await asyncio.sleep(0.5)
|
||||
await c.disconnect()
|
||||
|
||||
|
||||
asyncio.run(main())
|
||||
@@ -1,73 +0,0 @@
|
||||
"""Per wake cycle timings from a serial capture of the deep sleep timing config.
|
||||
|
||||
usage: cycles.py CAPTURE [LABEL]
|
||||
A cycle starts at the boot banner; the numbers are the device's millis() from the timing lines, and the
|
||||
capture clock gap from the first line of the cycle to the "Dialing" line.
|
||||
"""
|
||||
|
||||
import pathlib
|
||||
import re
|
||||
import statistics
|
||||
import sys
|
||||
|
||||
cap = (
|
||||
pathlib.Path(sys.argv[1]).read_text(encoding="utf-8", errors="replace").splitlines()
|
||||
)
|
||||
label = sys.argv[2] if len(sys.argv) > 2 else ""
|
||||
TS = re.compile(r"^\[(\d\d):(\d\d):(\d\d)(?:\.(\d+))?\]")
|
||||
|
||||
|
||||
def secs(line):
|
||||
m = TS.match(line)
|
||||
if not m:
|
||||
return None
|
||||
h, mi, s, f = m.groups()
|
||||
return int(h) * 3600 + int(mi) * 60 + int(s) + (int(f) / 10 ** len(f) if f else 0)
|
||||
|
||||
|
||||
cycles = []
|
||||
cur = None
|
||||
for line in cap:
|
||||
if "rst:0x" in line or (cur is None and "Log initialized" in line):
|
||||
cur = {"start": secs(line), "reset": line.split("]", 1)[-1].strip()[:60]}
|
||||
cycles.append(cur)
|
||||
continue
|
||||
if cur is None:
|
||||
continue
|
||||
if "Dialing" in line:
|
||||
cur.setdefault("dial_cap", secs(line))
|
||||
m = re.search(r"wifi connected at (\d+) ms", line)
|
||||
if m:
|
||||
cur.setdefault("wifi", int(m.group(1)))
|
||||
m = re.search(r"client connected at (\d+) ms \((.*?)\)", line)
|
||||
if m and "client" not in cur:
|
||||
cur["client"] = int(m.group(1))
|
||||
cur["who"] = m.group(2)
|
||||
m = re.search(r"first HA state '(.*?)' at (\d+) ms", line)
|
||||
if m and "state" not in cur:
|
||||
cur["state"] = int(m.group(2))
|
||||
|
||||
print(f"{label} cycles: {len(cycles)}")
|
||||
print(
|
||||
f"{'n':>2} {'wifi ms':>8} {'dial +ms':>9} {'client ms':>10} {'state ms':>9} {'client-wifi':>11} {'state-client':>12} client reset"
|
||||
)
|
||||
for i, c in enumerate(cycles, 1):
|
||||
dial = ""
|
||||
if c.get("dial_cap") is not None and c.get("start") is not None:
|
||||
dial = f"{(c['dial_cap'] - c['start']) * 1000:.0f}"
|
||||
cw = c["client"] - c["wifi"] if "client" in c and "wifi" in c else ""
|
||||
sc = c["state"] - c["client"] if "state" in c and "client" in c else ""
|
||||
print(
|
||||
f"{i:>2} {c.get('wifi', ''):>8} {dial:>9} {c.get('client', ''):>10} {c.get('state', ''):>9} {cw:>11} {sc:>12} {c.get('who', '')} {c.get('reset', '')[:28]}"
|
||||
)
|
||||
for c in cycles:
|
||||
if "client" in c and "wifi" in c:
|
||||
c["client-wifi"] = c["client"] - c["wifi"]
|
||||
if "state" in c and "client" in c:
|
||||
c["state-client"] = c["state"] - c["client"]
|
||||
for key in ("wifi", "client", "state", "client-wifi", "state-client"):
|
||||
vals = [c[key] for c in cycles if key in c]
|
||||
if vals:
|
||||
print(
|
||||
f"{key}: n={len(vals)} min={min(vals)} median={statistics.median(vals):.0f} max={max(vals)}"
|
||||
)
|
||||
@@ -1,107 +0,0 @@
|
||||
"""Per Wi-Fi drop timings from a serial capture of the outgoing connection timing config.
|
||||
|
||||
usage: wificycles.py CAPTURE [LABEL]
|
||||
A cycle starts at "wifi cycle disabling"; the numbers are the device's millis() from the timing lines.
|
||||
"dial" says whether the client that connected first came from the device's own dial ("Dialing" seen after the
|
||||
reconnect and before the hello) or from an incoming connection ("Accept" seen first).
|
||||
"""
|
||||
|
||||
import pathlib
|
||||
import re
|
||||
import statistics
|
||||
import sys
|
||||
|
||||
cap = (
|
||||
pathlib.Path(sys.argv[1]).read_text(encoding="utf-8", errors="replace").splitlines()
|
||||
)
|
||||
label = sys.argv[2] if len(sys.argv) > 2 else ""
|
||||
TS = re.compile(r"^\[(\d\d):(\d\d):(\d\d)(?:\.(\d+))?\]")
|
||||
|
||||
|
||||
def secs(line):
|
||||
m = TS.match(line)
|
||||
if not m:
|
||||
return None
|
||||
h, mi, se, f = m.groups()
|
||||
return int(h) * 3600 + int(mi) * 60 + int(se) + (int(f) / 10 ** len(f) if f else 0)
|
||||
|
||||
|
||||
cycles = []
|
||||
cur = None
|
||||
loop_max = []
|
||||
for line in cap:
|
||||
m = re.search(r"loop time max (\d+) ms", line)
|
||||
if m:
|
||||
loop_max.append(int(m.group(1)))
|
||||
if "wifi cycle disabling" in line:
|
||||
cur = {"order": []}
|
||||
cycles.append(cur)
|
||||
continue
|
||||
if cur is None:
|
||||
continue
|
||||
m = re.search(r"wifi connected at (\d+) ms", line)
|
||||
if m and "wifi" not in cur:
|
||||
cur["wifi"] = int(m.group(1))
|
||||
cur["wifi_cap"] = secs(line)
|
||||
if "Dialing" in line:
|
||||
cur["order"].append("dial")
|
||||
cur["dials"] = cur.get("dials", 0) + 1
|
||||
if "dial_cap" not in cur and "wifi_cap" in cur:
|
||||
cur["dial_cap"] = secs(line)
|
||||
elif "dial_cap" not in cur and "dial_before_wifi_cap" not in cur:
|
||||
cur["dial_before_wifi_cap"] = secs(line)
|
||||
if (
|
||||
re.search(r"client disconnected at \d+ ms \(\d+\.\d+\.\d+\.\d+\)", line)
|
||||
and "wifi" in cur
|
||||
and "client" not in cur
|
||||
):
|
||||
cur["dial_closed"] = cur.get("dial_closed", 0) + 1
|
||||
if "Accept " in line and "wifi" in cur:
|
||||
cur["order"].append("accept")
|
||||
m = re.search(r"client connected at (\d+) ms \((.*?)\)", line)
|
||||
if m and "wifi" in cur and "client" not in cur:
|
||||
cur["client"] = int(m.group(1))
|
||||
cur["who"] = m.group(2).split(" ")[0]
|
||||
cur["via"] = cur["order"][0] if cur["order"] else "?"
|
||||
m = re.search(r"Connect (failed|timeout)", line)
|
||||
if m:
|
||||
cur.setdefault("connect_errors", 0)
|
||||
cur["connect_errors"] += 1
|
||||
|
||||
print(f"{label} cycles: {len(cycles)}")
|
||||
print(
|
||||
f"{'n':>2} {'wifi ms':>8} {'dial-wifi cap ms':>16} {'client ms':>10} {'client-wifi':>11} via dials closed client"
|
||||
)
|
||||
for i, c in enumerate(cycles, 1):
|
||||
cw = c["client"] - c["wifi"] if "client" in c and "wifi" in c else ""
|
||||
c["client-wifi"] = cw
|
||||
dw = ""
|
||||
if "wifi_cap" in c and c.get("wifi_cap") is not None:
|
||||
# the first dial of the cycle, whether it was logged before or after the Wi-Fi line
|
||||
if c.get("dial_before_wifi_cap") is not None:
|
||||
dw = f"{(c['dial_before_wifi_cap'] - c['wifi_cap']) * 1000:.0f}"
|
||||
elif "dial_cap" in c and c["dial_cap"] is not None:
|
||||
dw = f"{(c['dial_cap'] - c['wifi_cap']) * 1000:.0f}"
|
||||
c["dial-wifi"] = dw
|
||||
print(
|
||||
f"{i:>2} {c.get('wifi', ''):>8} {dw:>16} {c.get('client', ''):>10} {cw:>11} {c.get('via', ''):7s} {c.get('dials', 0):>5} {c.get('dial_closed', 0):>6} {c.get('who', '')}"
|
||||
)
|
||||
for via in ("dial", "accept"):
|
||||
vals = [
|
||||
c["client-wifi"]
|
||||
for c in cycles
|
||||
if c.get("via") == via and c["client-wifi"] != ""
|
||||
]
|
||||
if vals:
|
||||
print(
|
||||
f"client-wifi via {via}: n={len(vals)} min={min(vals)} median={statistics.median(vals):.0f} max={max(vals)}"
|
||||
)
|
||||
dws = [float(c["dial-wifi"]) for c in cycles if c.get("dial-wifi") not in ("", None)]
|
||||
if dws:
|
||||
print(
|
||||
f"dial after wifi connected (capture clock): n={len(dws)} min={min(dws):.0f} median={statistics.median(dws):.0f} max={max(dws):.0f}"
|
||||
)
|
||||
if loop_max:
|
||||
print(
|
||||
f"loop time max per 5 s: n={len(loop_max)} min={min(loop_max)} median={statistics.median(loop_max):.0f} max={max(loop_max)}"
|
||||
)
|
||||
@@ -1,22 +0,0 @@
|
||||
#!/bin/sh
|
||||
# cases.sh DEV_IP KEY CAPTURE LABEL : the SEN0395 flow (settings, switches, junk lines, factory reset, reset) against
|
||||
# templates/dfrobot-sen0395-dut.yaml, with a serial capture of the device running into CAPTURE
|
||||
D=$1; K=$2; LOG=$3; LABEL=$4; PY=${PYTHON:-python3}; CTL="$(dirname "$0")/ctl.py"
|
||||
show() { tail -n +$(($1+1)) "$LOG" | sed 's/\x1b\[[0-9;]*m//g' | grep -a 'dfrobot\|Detected\|\[W\]\|\[E\]\|sen\]' | grep -a -v 'JYBSS\|took a long time' | cut -c1-200; }
|
||||
step() { n0=$(wc -l < "$LOG"); echo "=== $LABEL: $1 ($(date +%T))"; shift; $PY "$CTL" "$D" "$K" "$@" || { rc=$?; echo "driver failed ($rc), aborting"; exit $rc; }; echo "--- device log:"; show "$n0"; }
|
||||
frames() { echo "frames: $(tail -n +$(($1+1)) "$LOG" | grep -a -c 'JYBSS,1') present, $(tail -n +$(($1+1)) "$LOG" | grep -a -c 'JYBSS,0') absent"; }
|
||||
n0=$(wc -l < "$LOG"); echo "=== $LABEL: 20 s of frames ($(date +%T))"; sleep 20; frames "$n0"
|
||||
step "range 0 to 3 m" "press:Range 0 to 3m" wait:12
|
||||
step "range 0 to 9 m" "press:Range 0 to 9m" wait:12
|
||||
step "latency 1 s / 2 s" "press:Latency 1s 2s" wait:12
|
||||
step "latency 0 / 0" "press:Latency 0 0" wait:12
|
||||
step "sensitivity 7" "press:Sensitivity 7" wait:12
|
||||
step "LED off then on" "sw:LED=off" wait:10 "sw:LED=on" wait:10
|
||||
step "sensor active off then on" "sw:Sensor active=off" wait:10 "sw:Sensor active=on" wait:10
|
||||
step "presence via UART off then on" "sw:Presence via UART=off" wait:10 "sw:Presence via UART=on" wait:10
|
||||
step "start after boot off then on" "sw:Start after boot=off" wait:10 "sw:Start after boot=on" wait:10
|
||||
for n in 100 160 200 220 240 256; do step "junk line of $n bytes" "press:Junk $n" wait:7; done
|
||||
step "junk 220 then a command" "press:Junk 220" wait:6 "press:Range 0 to 9m" wait:12
|
||||
step "factory reset" "press:Factory reset" wait:15
|
||||
step "reset" "press:Reset" wait:15
|
||||
n0=$(wc -l < "$LOG"); echo "=== $LABEL: 20 s of frames after ($(date +%T))"; sleep 20; frames "$n0"
|
||||
@@ -1,63 +0,0 @@
|
||||
"""Drive the SEN0395 test device over the API and print its binary sensor and switch updates.
|
||||
usage: ctl.py HOST KEY(- for plaintext) OP [OP ...] OP: press:NAME | sw:NAME=on|off | wait:SECONDS
|
||||
"""
|
||||
|
||||
import asyncio
|
||||
import sys
|
||||
import time
|
||||
|
||||
from aioesphomeapi import (
|
||||
APIClient,
|
||||
BinarySensorState,
|
||||
ButtonInfo,
|
||||
SwitchInfo,
|
||||
SwitchState,
|
||||
)
|
||||
|
||||
HOST, KEY = sys.argv[1], sys.argv[2]
|
||||
OPS = sys.argv[3:]
|
||||
T0 = time.time()
|
||||
|
||||
|
||||
async def main() -> None:
|
||||
c = APIClient(HOST, 6053, None, noise_psk=None if KEY == "-" else KEY)
|
||||
await c.connect(login=True)
|
||||
ents, _ = await c.list_entities_services()
|
||||
by_key = {e.key: e for e in ents}
|
||||
buttons = {e.name: e for e in ents if isinstance(e, ButtonInfo)}
|
||||
switches = {e.name: e for e in ents if isinstance(e, SwitchInfo)}
|
||||
|
||||
def on_state(s) -> None:
|
||||
e = by_key.get(s.key)
|
||||
if isinstance(s, BinarySensorState):
|
||||
print(
|
||||
f"{time.time() - T0:7.3f} BIN {e.name} = {'ON' if s.state else 'off'}"
|
||||
)
|
||||
elif isinstance(s, SwitchState):
|
||||
print(
|
||||
f"{time.time() - T0:7.3f} SW {e.name} = {'on' if s.state else 'off'}"
|
||||
)
|
||||
|
||||
c.subscribe_states(on_state)
|
||||
await asyncio.sleep(1.0)
|
||||
for op in OPS:
|
||||
kind, _, rest = op.partition(":")
|
||||
if kind == "wait":
|
||||
await asyncio.sleep(float(rest))
|
||||
elif kind == "press":
|
||||
if rest not in buttons:
|
||||
sys.exit(f"no button {rest!r}; have {sorted(buttons)}")
|
||||
print(f"{time.time() - T0:7.3f} >>> press {rest}")
|
||||
c.button_command(buttons[rest].key)
|
||||
elif kind == "sw":
|
||||
name, _, val = rest.partition("=")
|
||||
if name not in switches:
|
||||
sys.exit(f"no switch {name!r}; have {sorted(switches)}")
|
||||
print(f"{time.time() - T0:7.3f} >>> switch {name} {val}")
|
||||
c.switch_command(switches[name].key, val == "on")
|
||||
else:
|
||||
sys.exit(f"unknown op {op!r}")
|
||||
await c.disconnect()
|
||||
|
||||
|
||||
asyncio.run(main())
|
||||
@@ -1,56 +0,0 @@
|
||||
"""List every entity over the native API with its icon, device class and unit: one sorted JSON line each.
|
||||
|
||||
usage: api_list.py HOST KEY OUT
|
||||
"""
|
||||
|
||||
import asyncio
|
||||
import json
|
||||
import pathlib
|
||||
import sys
|
||||
|
||||
from aioesphomeapi import APIClient
|
||||
|
||||
HOST, KEY, OUT = sys.argv[1], sys.argv[2], sys.argv[3]
|
||||
|
||||
|
||||
async def main() -> None:
|
||||
c = APIClient(HOST, 6053, None, noise_psk=KEY)
|
||||
await c.connect(login=True)
|
||||
ents, _ = await c.list_entities_services()
|
||||
rows = []
|
||||
for e in ents:
|
||||
row = {
|
||||
"type": type(e).__name__,
|
||||
"name": e.name,
|
||||
"object_id": e.object_id,
|
||||
"icon": e.icon,
|
||||
}
|
||||
for k in (
|
||||
"device_class",
|
||||
"unit_of_measurement",
|
||||
"event_types",
|
||||
"options",
|
||||
"mode",
|
||||
):
|
||||
if hasattr(e, k):
|
||||
v = getattr(e, k)
|
||||
row[k] = (
|
||||
list(v)
|
||||
if isinstance(v, (list, tuple))
|
||||
else (v.name if hasattr(v, "name") else v)
|
||||
)
|
||||
row["entity_category"] = (
|
||||
e.entity_category.name
|
||||
if hasattr(e.entity_category, "name")
|
||||
else e.entity_category
|
||||
)
|
||||
row["disabled_by_default"] = e.disabled_by_default
|
||||
rows.append(row)
|
||||
rows.sort(key=lambda r: (r["type"], r["name"]))
|
||||
with pathlib.Path(OUT).open("w", encoding="utf-8") as f:
|
||||
f.writelines(json.dumps(r, sort_keys=True) + "\n" for r in rows)
|
||||
print(f"{len(rows)} entities listed")
|
||||
await c.disconnect()
|
||||
|
||||
|
||||
asyncio.run(main())
|
||||
@@ -1,13 +0,0 @@
|
||||
#!/bin/sh
|
||||
# compare.sh NAME_A NAME_B : diff the readback.sh outputs of two device names (api, web, mqttn and, when present, dump)
|
||||
# after replacing each name with DEV. Exit 1 when any pair differs; the diffs stay in cmp-KIND.diff.
|
||||
A=$1; B=$2; rc=0
|
||||
[ -n "$A" ] && [ -n "$B" ] || { echo "usage: compare.sh NAME_A NAME_B"; exit 2; }
|
||||
for k in api web mqttn dump; do
|
||||
ext=jsonl; [ $k = dump ] && ext=txt
|
||||
[ -f "$PWD/$k-$A.$ext" ] && [ -f "$PWD/$k-$B.$ext" ] || { echo "$k: missing"; [ $k = dump ] || rc=1; continue; }
|
||||
sed "s/$A/DEV/g; s/$(echo "$A" | tr - _)/DEV/g" "$PWD/$k-$A.$ext" > "$PWD/cmp-$k-a.txt"
|
||||
sed "s/$B/DEV/g; s/$(echo "$B" | tr - _)/DEV/g" "$PWD/$k-$B.$ext" > "$PWD/cmp-$k-b.txt"
|
||||
if diff -u "$PWD/cmp-$k-a.txt" "$PWD/cmp-$k-b.txt" > "$PWD/cmp-$k.diff"; then echo "$k: identical ($(wc -l < "$PWD/cmp-$k-b.txt" | tr -d ' ') lines)"; else echo "$k: DIFFERS"; head -20 "$PWD/cmp-$k.diff"; rc=1; fi
|
||||
done
|
||||
exit $rc
|
||||
@@ -1,37 +0,0 @@
|
||||
"""Normalise mosquitto_sub output (topic TAB payload) for one device: drop other devices, replace the name, drop dev block.
|
||||
|
||||
usage: mqtt_norm.py IN NAME OUT
|
||||
"""
|
||||
|
||||
import json
|
||||
import pathlib
|
||||
import sys
|
||||
|
||||
IN, NAME, OUT = sys.argv[1], sys.argv[2], sys.argv[3]
|
||||
rows = {}
|
||||
with pathlib.Path(IN).open(encoding="utf-8") as f:
|
||||
for line in f:
|
||||
topic, _, payload = line.rstrip("\n").partition("\t")
|
||||
if (
|
||||
f"/{NAME}/" not in topic and not topic.startswith(f"{NAME}/")
|
||||
) or topic == f"{NAME}/debug":
|
||||
continue
|
||||
topic = topic.replace(NAME, "DEV")
|
||||
try:
|
||||
obj = json.loads(payload)
|
||||
except ValueError:
|
||||
rows[topic] = payload.replace(NAME, "DEV")
|
||||
continue
|
||||
if isinstance(obj, dict):
|
||||
obj.pop("dev", None)
|
||||
obj = {
|
||||
k: (v.replace(NAME, "DEV") if isinstance(v, str) else v)
|
||||
for k, v in obj.items()
|
||||
}
|
||||
rows[topic] = obj
|
||||
with pathlib.Path(OUT).open("w", encoding="utf-8") as f:
|
||||
f.writelines(
|
||||
json.dumps({"topic": t, "payload": rows[t]}, sort_keys=True) + "\n"
|
||||
for t in sorted(rows)
|
||||
)
|
||||
print(f"{len(rows)} topics for {NAME}")
|
||||
@@ -1,18 +0,0 @@
|
||||
#!/bin/sh
|
||||
# readback.sh DEVICE_IP KEY NAME BROKER_HOST [CAPTURE] : record how a device built from templates/entity-icon-dut.yaml
|
||||
# reports its entity icons and device classes: the native API listing (api-NAME.jsonl), the retained MQTT discovery
|
||||
# payloads and states (mqtt-NAME.txt, normalised to mqttn-NAME.jsonl with the device name replaced and the debug topic
|
||||
# dropped), the web_server /events listing plus every REST endpoint with ?detail=all (web-NAME.jsonl) and, when a
|
||||
# serial CAPTURE is given, the dump_config Icon and Device Class lines (dump-NAME.txt, timestamps and line numbers
|
||||
# removed). KEY as for api_button.py. Outputs go to the working directory; compare two names with compare.sh.
|
||||
HERE=$(cd "$(dirname "$0")" && pwd); PY=${PYTHON:-python3}; DEV=$1; KEY=$2; N=$3; B=$4; CAP=$5; rc=0; TAB=$(printf '\t')
|
||||
[ -n "$DEV" ] && [ -n "$KEY" ] && [ -n "$N" ] && [ -n "$B" ] || { echo "usage: readback.sh DEVICE_IP KEY NAME BROKER_HOST [CAPTURE]"; exit 2; }
|
||||
timeout 12 mosquitto_sub -h "$B" -v -t 'homeassistant/#' -t "$N/#" -F "%t$TAB%p" > "$PWD/mqtt-$N.txt" 2> "$PWD/mqtt-$N.err"
|
||||
$PY "$HERE/mqtt_norm.py" "$PWD/mqtt-$N.txt" "$N" "$PWD/mqttn-$N.jsonl" || rc=1
|
||||
$PY "$HERE/api_list.py" "$DEV" "$KEY" "$PWD/api-$N.jsonl" || { echo "API listing failed"; rc=1; }
|
||||
$PY "$HERE/web_dump.py" "$DEV" "$PWD/web-$N.jsonl" || { echo "web_server dump failed"; rc=1; }
|
||||
if [ -n "$CAP" ]; then
|
||||
LC_ALL=C grep -a '\]: Icon: \|\]: Device Class: ' "$CAP" | LC_ALL=C sed 's/\x1b\[[0-9;]*m//g; s/^\[[^]]*\]//; s/:[0-9]*\]:/]:/' | sort > "$PWD/dump-$N.txt"
|
||||
echo "dump_config icon lines $(grep -c 'Icon:' "$PWD/dump-$N.txt"), device class lines $(grep -c 'Device Class:' "$PWD/dump-$N.txt")"
|
||||
fi
|
||||
exit $rc
|
||||
@@ -1,99 +0,0 @@
|
||||
"""Dump the web_server view of every entity: the /events listing (detail all) and each REST endpoint with ?detail=all.
|
||||
|
||||
usage: web_dump.py HOST OUT
|
||||
"""
|
||||
|
||||
import json
|
||||
import pathlib
|
||||
import socket
|
||||
import sys
|
||||
import time
|
||||
import urllib.parse
|
||||
import urllib.request
|
||||
|
||||
HOST, OUT = sys.argv[1], sys.argv[2]
|
||||
|
||||
|
||||
def sse_listing(seconds: float) -> list[dict]:
|
||||
s = socket.create_connection((HOST, 80), timeout=5)
|
||||
s.sendall(
|
||||
b"GET /events HTTP/1.1\r\nHost: %s\r\nAccept: text/event-stream\r\n\r\n"
|
||||
% HOST.encode()
|
||||
)
|
||||
buf = b""
|
||||
deadline = time.monotonic() + seconds
|
||||
s.settimeout(1.0)
|
||||
while time.monotonic() < deadline:
|
||||
try:
|
||||
data = s.recv(65536)
|
||||
except TimeoutError:
|
||||
continue
|
||||
if not data:
|
||||
break
|
||||
buf += data
|
||||
s.close()
|
||||
head, _, body = buf.partition(b"\r\n\r\n")
|
||||
if b"chunked" in head.lower():
|
||||
out = b""
|
||||
while True:
|
||||
i = body.find(b"\r\n")
|
||||
if i < 0:
|
||||
break
|
||||
size = int(body[:i].split(b";")[0], 16)
|
||||
out += body[i + 2 : i + 2 + size]
|
||||
body = body[i + 2 + size + 2 :]
|
||||
if size == 0:
|
||||
break
|
||||
body = out
|
||||
rows = []
|
||||
for block in body.decode(errors="replace").split("\n\n"):
|
||||
ev, data = None, None
|
||||
for line in block.split("\n"):
|
||||
line = line.rstrip("\r")
|
||||
if line.startswith("event:"):
|
||||
ev = line[6:].strip()
|
||||
elif line.startswith("data:"):
|
||||
data = line[5:].strip()
|
||||
if ev in ("state", "state_detail_all") and data:
|
||||
try:
|
||||
obj = json.loads(data)
|
||||
except ValueError:
|
||||
rows.append({"event": ev, "invalid": data})
|
||||
continue
|
||||
# bare state updates that land inside the window carry no domain; only the listing rows are kept
|
||||
if "domain" in obj:
|
||||
rows.append({"event": ev, **obj})
|
||||
return rows
|
||||
|
||||
|
||||
def get_json(url: str) -> dict:
|
||||
"""One retry: the ESP8266 async server occasionally leaves a request unanswered."""
|
||||
for attempt in (1, 2):
|
||||
try:
|
||||
with urllib.request.urlopen(url, timeout=5) as resp:
|
||||
return json.loads(resp.read())
|
||||
except TimeoutError:
|
||||
if attempt == 2:
|
||||
raise
|
||||
print(f"retrying {url}", flush=True)
|
||||
return {}
|
||||
|
||||
|
||||
rows = sse_listing(6)
|
||||
ids = sorted({r["id"] for r in rows if "id" in r})
|
||||
rest = []
|
||||
for ident in ids:
|
||||
domain, _, obj = ident.partition("/")
|
||||
url = f"http://{HOST}/{domain}/{urllib.parse.quote(obj)}?detail=all"
|
||||
try:
|
||||
rest.append({"url": url.replace(HOST, "HOST"), **get_json(url)})
|
||||
except Exception as e: # noqa: BLE001
|
||||
rest.append({"url": url.replace(HOST, "HOST"), "error": str(e)})
|
||||
time.sleep(0.3)
|
||||
with pathlib.Path(OUT).open("w", encoding="utf-8") as f:
|
||||
f.writelines(
|
||||
json.dumps(r, sort_keys=True) + "\n"
|
||||
for r in sorted(rows, key=lambda r: (r.get("id", ""), r["event"]))
|
||||
)
|
||||
f.writelines(json.dumps(r, sort_keys=True) + "\n" for r in rest)
|
||||
print(f"{len(rows)} sse rows, {len(ids)} ids, {len(rest)} rest rows")
|
||||
@@ -1,78 +0,0 @@
|
||||
"""Read or drive a bulb directly over its own ESPHome API (an HA-side change, independent of the mirror).
|
||||
|
||||
usage: bulb.py HOST KEY state | on [brightness 0-1] [ct_mireds|rgb r,g,b] | off | restart
|
||||
"""
|
||||
|
||||
import asyncio
|
||||
import sys
|
||||
|
||||
from aioesphomeapi import APIClient, ButtonInfo, LightColorCapability, LightInfo
|
||||
|
||||
HOST, KEY, CMD = sys.argv[1], sys.argv[2], sys.argv[3]
|
||||
ARGS = sys.argv[4:]
|
||||
|
||||
|
||||
async def main() -> None:
|
||||
c = APIClient(HOST, 6053, None, noise_psk=None if KEY == "-" else KEY)
|
||||
await c.connect(login=True)
|
||||
ents, _ = await c.list_entities_services()
|
||||
light = next((e for e in ents if isinstance(e, LightInfo)), None)
|
||||
if light is None:
|
||||
sys.exit("no light entity on this device; is HOST a bulb?")
|
||||
if CMD == "state":
|
||||
fut = asyncio.get_running_loop().create_future()
|
||||
|
||||
def on_state(st):
|
||||
if getattr(st, "key", None) == light.key and not fut.done():
|
||||
fut.set_result(st)
|
||||
|
||||
c.subscribe_states(on_state)
|
||||
st = await asyncio.wait_for(fut, 5)
|
||||
print(
|
||||
f"{light.name}: on={st.state} mode={st.color_mode} bri={st.brightness:.2f} "
|
||||
f"ct={st.color_temperature:.1f} rgb={st.red:.2f}/{st.green:.2f}/{st.blue:.2f} "
|
||||
f"white={st.white:.2f} cold={st.cold_white:.2f} warm={st.warm_white:.2f}"
|
||||
)
|
||||
elif CMD == "on":
|
||||
kw = {"state": True}
|
||||
if ARGS:
|
||||
kw["brightness"] = float(ARGS[0])
|
||||
if len(ARGS) > 1:
|
||||
if "," in ARGS[1]:
|
||||
r, g, b = (float(x) for x in ARGS[1].split(","))
|
||||
kw["rgb"] = (r, g, b)
|
||||
kw["color_mode"] = (
|
||||
LightColorCapability.RGB
|
||||
| LightColorCapability.ON_OFF
|
||||
| LightColorCapability.BRIGHTNESS
|
||||
)
|
||||
else:
|
||||
kw["color_temperature"] = float(ARGS[1])
|
||||
kw["color_mode"] = (
|
||||
LightColorCapability.COLOR_TEMPERATURE
|
||||
| LightColorCapability.ON_OFF
|
||||
| LightColorCapability.BRIGHTNESS
|
||||
)
|
||||
c.light_command(light.key, **kw)
|
||||
print("bulb on", kw)
|
||||
elif CMD == "off":
|
||||
c.light_command(light.key, state=False)
|
||||
print("bulb off")
|
||||
elif CMD == "restart":
|
||||
btn = next(
|
||||
(
|
||||
e
|
||||
for e in ents
|
||||
if isinstance(e, ButtonInfo) and "restart" in e.name.lower()
|
||||
),
|
||||
None,
|
||||
)
|
||||
if btn is None:
|
||||
sys.exit("no restart button on this device")
|
||||
c.button_command(btn.key)
|
||||
print("bulb restart pressed")
|
||||
await asyncio.sleep(0.5)
|
||||
await c.disconnect()
|
||||
|
||||
|
||||
asyncio.run(main())
|
||||
@@ -1,71 +0,0 @@
|
||||
"""Held-report cases for esphome#21144 with persistent API connections, so the steps land inside the 3 s fade.
|
||||
usage: heldcase.py DEV_IP KEY BULB_IP same|many [BULB_KEY] (KEY or BULB_KEY of - means plaintext)
|
||||
t0 press "A 50 fade 3s" on the mirror device (3 s fade to 50%)
|
||||
t0+0.7 set the bulb directly to 90% (Home Assistant reports it to the mirror during the fade: held)
|
||||
t0+1.4 same: press "A 50 fade 3s" again (same target as the running fade)
|
||||
many: press "A many calls" (16 calls in one loop pass, the last one 100% with a 1 s fade)
|
||||
t0+6.5 read the bulb, press Log state so the mirror prints its state
|
||||
"""
|
||||
|
||||
import asyncio
|
||||
import sys
|
||||
import time
|
||||
|
||||
from aioesphomeapi import APIClient, ButtonInfo, LightInfo, LightState
|
||||
|
||||
DEV, KEY, BULB, CASE = sys.argv[1:5]
|
||||
BULB_KEY = sys.argv[5] if len(sys.argv) > 5 else "-"
|
||||
if CASE not in ("same", "many"):
|
||||
sys.exit(f"case must be same or many, got {CASE!r}")
|
||||
T0 = time.time()
|
||||
|
||||
|
||||
def stamp() -> str:
|
||||
return f"{time.time() - T0:6.3f}"
|
||||
|
||||
|
||||
async def main() -> None:
|
||||
dev = APIClient(DEV, 6053, None, noise_psk=None if KEY == "-" else KEY)
|
||||
bulb = APIClient(BULB, 6053, None, noise_psk=None if BULB_KEY == "-" else BULB_KEY)
|
||||
await dev.connect(login=True)
|
||||
await bulb.connect(login=True)
|
||||
dents, _ = await dev.list_entities_services()
|
||||
bents, _ = await bulb.list_entities_services()
|
||||
buttons = {e.name: e for e in dents if isinstance(e, ButtonInfo)}
|
||||
blight = next(e for e in bents if isinstance(e, LightInfo))
|
||||
states = {}
|
||||
|
||||
def on_bulb(s) -> None:
|
||||
if isinstance(s, LightState) and s.key == blight.key:
|
||||
states["bulb"] = s
|
||||
print(f"{stamp()} bulb state: on={s.state} bri={s.brightness:.2f}")
|
||||
|
||||
bulb.subscribe_states(on_bulb)
|
||||
await asyncio.sleep(1.0)
|
||||
print(f"{stamp()} >>> bulb to 100% (precondition)")
|
||||
bulb.light_command(blight.key, state=True, brightness=1.0)
|
||||
await asyncio.sleep(4.0)
|
||||
t = time.time()
|
||||
print(f"{stamp()} >>> t0 press A 50 fade 3s")
|
||||
dev.button_command(buttons["A 50 fade 3s"].key)
|
||||
await asyncio.sleep(0.7 - (time.time() - t))
|
||||
print(f"{stamp()} >>> bulb direct to 90%")
|
||||
bulb.light_command(blight.key, state=True, brightness=0.9)
|
||||
await asyncio.sleep(1.4 - (time.time() - t))
|
||||
name = "A 50 fade 3s" if CASE == "same" else "A many calls"
|
||||
print(f"{stamp()} >>> press {name}")
|
||||
dev.button_command(buttons[name].key)
|
||||
await asyncio.sleep(6.5 - (time.time() - t))
|
||||
print(f"{stamp()} >>> press Log state (the mirror's state is in the device log)")
|
||||
dev.button_command(buttons["Log state"].key)
|
||||
await asyncio.sleep(1.0)
|
||||
b = states.get("bulb")
|
||||
print(
|
||||
f"{stamp()} RESULT bulb "
|
||||
+ (f"bri={b.brightness:.2f}" if b is not None else "no state")
|
||||
)
|
||||
await dev.disconnect()
|
||||
await bulb.disconnect()
|
||||
|
||||
|
||||
asyncio.run(main())
|
||||
@@ -1,85 +0,0 @@
|
||||
"""Drive LD2450 numbers and selects over the API while printing every LD2450 state update.
|
||||
usage: zonedrive.py HOST KEY(- for plaintext) OP [OP ...]
|
||||
OP: set:NAME=VALUE | sel:NAME=OPTION | wait:SECONDS | list
|
||||
Every state update of an entity whose name contains "LD2450" is printed with a timestamp.
|
||||
"""
|
||||
|
||||
import asyncio
|
||||
import sys
|
||||
import time
|
||||
|
||||
from aioesphomeapi import (
|
||||
APIClient,
|
||||
NumberInfo,
|
||||
NumberState,
|
||||
SelectInfo,
|
||||
SelectState,
|
||||
SensorInfo,
|
||||
SensorState,
|
||||
)
|
||||
|
||||
HOST, KEY = sys.argv[1], sys.argv[2]
|
||||
OPS = sys.argv[3:]
|
||||
T0 = time.time()
|
||||
|
||||
|
||||
def stamp() -> str:
|
||||
return f"{time.time() - T0:7.3f}"
|
||||
|
||||
|
||||
async def main() -> None:
|
||||
c = APIClient(HOST, 6053, None, noise_psk=None if KEY == "-" else KEY)
|
||||
await c.connect(login=True)
|
||||
ents, _ = await c.list_entities_services()
|
||||
by_key = {e.key: e for e in ents}
|
||||
numbers = {e.name: e for e in ents if isinstance(e, NumberInfo)}
|
||||
selects = {e.name: e for e in ents if isinstance(e, SelectInfo)}
|
||||
sensors = {e.name: e for e in ents if isinstance(e, SensorInfo)}
|
||||
|
||||
def on_state(s) -> None:
|
||||
e = by_key.get(s.key)
|
||||
if e is None or "LD2450" not in e.name:
|
||||
return
|
||||
if isinstance(s, NumberState):
|
||||
print(
|
||||
f"{stamp()} NUM {e.name} = {s.state:.0f}{' (missing)' if s.missing_state else ''}"
|
||||
)
|
||||
elif isinstance(s, SelectState):
|
||||
print(f"{stamp()} SEL {e.name} = {s.state}")
|
||||
elif isinstance(s, SensorState) and "Count" in e.name:
|
||||
print(f"{stamp()} CNT {e.name} = {s.state:.0f}")
|
||||
|
||||
c.subscribe_states(on_state)
|
||||
await asyncio.sleep(1.5)
|
||||
for op in OPS:
|
||||
if op == "list":
|
||||
for n in sorted(numbers):
|
||||
print("number:", n)
|
||||
for n in sorted(selects):
|
||||
print("select:", n, selects[n].options)
|
||||
for n in sorted(sensors):
|
||||
if "Count" in n:
|
||||
print("sensor:", n)
|
||||
continue
|
||||
kind, _, rest = op.partition(":")
|
||||
if kind == "wait":
|
||||
await asyncio.sleep(float(rest))
|
||||
continue
|
||||
name, _, value = rest.partition("=")
|
||||
if kind == "set":
|
||||
if name not in numbers:
|
||||
sys.exit(f"no number named {name!r}; have {sorted(numbers)}")
|
||||
print(f"{stamp()} >>> set {name} = {value}")
|
||||
c.number_command(numbers[name].key, float(value))
|
||||
elif kind == "sel":
|
||||
if name not in selects:
|
||||
sys.exit(f"no select named {name!r}; have {sorted(selects)}")
|
||||
print(f"{stamp()} >>> select {name} = {value}")
|
||||
c.select_command(selects[name].key, value)
|
||||
else:
|
||||
sys.exit(f"unknown op {op!r}")
|
||||
await asyncio.sleep(0.3)
|
||||
await c.disconnect()
|
||||
|
||||
|
||||
asyncio.run(main())
|
||||
@@ -1,44 +0,0 @@
|
||||
#!/bin/sh
|
||||
# cases.sh NAME KEY BROKER_HOST SUB_PORT CAPTURE [DEV_HOST] [restart] : subscribe to NAME/# on the broker, send a
|
||||
# switch command and an on_message topic, press the 3000 byte publish button over the API (KEY, - for plaintext),
|
||||
# optionally restart the local broker (its PID from mosquitto.pid in the working directory, written when it was started
|
||||
# with `mosquitto -c mosquitto-ws.conf & echo $! > mosquitto.pid`), and show the device log. Outputs (sub-NAME.txt, mosquitto.out) go to the working directory, which should be the scratch directory.
|
||||
N=$1; KEY=$2; B=$3; SP=$4; LOG=$5; DEV=${6:-$1.local}; RESTART=$7; HERE=$(cd "$(dirname "$0")" && pwd); PY=${PYTHON:-python3}; WORK=$PWD
|
||||
BTN=$HERE/../api_button.py
|
||||
[ -n "$KEY" ] && [ -r "$LOG" ] || { echo "usage: cases.sh NAME KEY BROKER_HOST SUB_PORT CAPTURE [DEV_HOST] [restart] (CAPTURE must be a readable file)"; exit 2; }
|
||||
show() { tail -n +$(($1+1)) "$LOG" | sed 's/\x1b\[[0-9;]*m//g' | grep -a 'mqtt\|\[probe:\|cmd payload\|Relay\|\[W\]\|\[E\]\|Guru\|abort\|Backtrace\|ESPHome version' | grep -a -v 'took a long time\|Publish.*Counter\|sensor/counter' | cut -c1-170; }
|
||||
pub() { mosquitto_pub -h "$B" -p "$SP" -t "$1" -m "$2" || { echo "mosquitto_pub to $1 failed"; exit 1; }; }
|
||||
n0=$(($(wc -l < "$LOG")+0))
|
||||
timeout 75 mosquitto_sub -h "$B" -p "$SP" -v -t "$N/#" > "$WORK/sub-$N.txt" 2> "$WORK/sub-$N.err" &
|
||||
sub_pid=$!
|
||||
sleep 20
|
||||
echo "=== $N: command to the switch and the 3000 byte publish ($(date +%T))"
|
||||
pub "$N/switch/relay/command" ON; sleep 2
|
||||
pub "$N/cmd" "hello-over-$N"; sleep 2
|
||||
$PY "$BTN" "$DEV" "$KEY" press "Publish big" || { echo "button press failed"; exit 1; }; sleep 3
|
||||
pub "$N/switch/relay/command" OFF; sleep 2
|
||||
if [ "$RESTART" = restart ]; then
|
||||
[ -f "$WORK/mosquitto-ws.conf" ] || { echo "no mosquitto-ws.conf in $WORK, cannot restart the broker"; exit 1; }
|
||||
echo "=== $N: broker restart ($(date +%T))"; n1=$(($(wc -l < "$LOG")+0))
|
||||
# Only this run's broker is signalled: its PID comes from mosquitto.pid, written when it was started
|
||||
pid=$(cat "$WORK/mosquitto.pid" 2>/dev/null); [ -n "$pid" ] || { echo "no mosquitto.pid in $WORK, cannot restart the broker"; exit 1; }
|
||||
kill "$pid" || { echo "broker PID $pid is not running, nothing to restart"; exit 1; }; sleep 8
|
||||
nc -z -w 3 "$B" 1883 && { echo "the old broker still answers on 1883 after the kill"; exit 1; }
|
||||
# exec so the PID is the broker's own and no shell stays behind holding the caller's output pipe open
|
||||
(cd "$WORK" && exec mosquitto -c mosquitto-ws.conf > mosquitto.out 2>&1 < /dev/null) &
|
||||
echo $! > "$WORK/mosquitto.pid"; sleep 25
|
||||
for port in $(awk '/^listener/ {print $2}' "$WORK/mosquitto-ws.conf"); do nc -z -w 3 "$B" "$port" || { echo "broker port $port not listening after the restart"; exit 1; }; done
|
||||
tail -n +$((n1+1)) "$LOG" | grep -a -q "MQTT_EVENT_CONNECTED\|\[mqtt:[0-9]*\]: Connected" || { echo "the device did not reconnect after the broker restart"; exit 1; }
|
||||
else
|
||||
echo "=== $N: no broker restart (pass 'restart' as the 7th argument for a local broker)"
|
||||
fi
|
||||
wait $sub_pid; sub_rc=$?
|
||||
[ "$sub_rc" = 124 ] || { echo "subscriber ended with status $sub_rc: $(cat "$WORK/sub-$N.err")"; exit 1; }
|
||||
echo "--- broker saw ($(grep -c . "$WORK/sub-$N.txt") messages): $(cut -c1-60 "$WORK/sub-$N.txt" | awk '{print $1}' | sort | uniq -c | tr '\n' ';')"
|
||||
big=$(grep "^$N/big " "$WORK/sub-$N.txt" | awk '{print length($2)}' | tr '\n' ' ')
|
||||
echo "--- big payload bytes seen: $big"
|
||||
echo "--- device log:"; show "$n0"
|
||||
case " $big " in *" 3000 "*) ;; *) echo "the 3000 byte payload did not reach the broker"; exit 1;; esac
|
||||
for want in "Relay ON" "cmd payload: hello-over-$N" "Relay OFF"; do
|
||||
tail -n +$((n0+1)) "$LOG" | grep -a -q "$want" || { echo "the device never logged '$want': the broker to device path failed"; exit 1; }
|
||||
done
|
||||
@@ -1,24 +0,0 @@
|
||||
#!/bin/sh
|
||||
# cli_tls_check.sh TREE [neg] YAML... : run `esphome clean-mqtt` from the checkout TREE for each config, which goes
|
||||
# through the same TLS setup in esphome/mqtt.py as `esphome logs` over MQTT, without needing a board. clean-mqtt never
|
||||
# exits on its own, so it runs under a 25 s timeout: status 124 after "Connected to MQTT broker!" means the CLI
|
||||
# connected. With neg every config must instead fail with CERTIFICATE_VERIFY_FAILED and never connect, so a negative
|
||||
# that fails for another reason (bad YAML, broker down) is reported as a failure too. A relative YAML path is taken
|
||||
# from the working directory, where the cleanmqtt-NAME.log outputs also go. Exit 1 when any config missed its result.
|
||||
TREE=$1; shift; PY=${PYTHON:-python3}; NEG=0
|
||||
[ "$1" = neg ] && { NEG=1; shift; }
|
||||
[ -d "$TREE/esphome" ] && [ -n "$1" ] || { echo "usage: cli_tls_check.sh TREE [neg] YAML..."; exit 2; }
|
||||
bad=0
|
||||
for y in "$@"; do
|
||||
case $y in /*) ;; *) y=$PWD/$y;; esac
|
||||
n=$(basename "$y" .yaml); log=$PWD/cleanmqtt-$n.log
|
||||
(cd "$TREE" && PYTHONUNBUFFERED=1 timeout 25 $PY -m esphome clean-mqtt "$y" > "$log" 2>&1); rc=$?
|
||||
if [ "$NEG" = 0 ] && [ "$rc" = 124 ] && grep -q "Connected to MQTT broker" "$log"; then
|
||||
echo "$n: connected"
|
||||
elif [ "$NEG" = 1 ] && grep -q "CERTIFICATE_VERIFY_FAILED" "$log" && ! grep -q "Connected to MQTT broker" "$log"; then
|
||||
echo "$n: rejected (CERTIFICATE_VERIFY_FAILED)"
|
||||
else
|
||||
echo "$n: FAILED (status $rc): $(grep -a -m1 -i 'cannot connect\|error' "$log" | cut -c1-160)"; bad=$((bad+1))
|
||||
fi
|
||||
done
|
||||
[ "$bad" = 0 ]
|
||||
@@ -1,53 +0,0 @@
|
||||
#!/bin/sh
|
||||
# flash_and_drive.sh TREE YAML PORT KEY BROKER_HOST MODE [SUB_PORT] : flash YAML from the checkout TREE over the serial
|
||||
# PORT, capture the serial log (cap-NAME.txt in the working directory), wait for the first MQTT connect or TLS error,
|
||||
# then drive the device with cases.sh (KEY as for cases.sh, - for a plaintext API). MODE local runs cases.sh with a
|
||||
# broker restart (the working directory must hold mosquitto-ws.conf and mosquitto.pid), public runs it without a
|
||||
# restart, neg only watches for 100 s (a build that must never connect). SUB_PORT is the plain listener cases.sh
|
||||
# subscribes on (default 1883). Ends with connect, disconnect, handshake error and crash counts, the config dump's
|
||||
# TLS line, the probe heap lines and the broker listener each connection used. Exit 1 when the capture did not start,
|
||||
# the device reached no MQTT event within 90 s (local and public), it crashed, or the mode's own check failed.
|
||||
TREE=$1; YAML=$2; PORT=$3; KEY=$4; B=$5; MODE=$6; SP=${7:-1883}
|
||||
case $YAML in /*) ;; *) YAML=$PWD/$YAML;; esac
|
||||
HERE=$(cd "$(dirname "$0")" && pwd); PY=${PYTHON:-python3}; N=$(basename "$YAML" .yaml); CAP=$PWD/cap-$N.txt; ULOG=$PWD/upload-$N.log
|
||||
[ -d "$TREE/esphome" ] && [ -e "$PORT" ] && [ -n "$KEY" ] && [ -n "$B" ] || { echo "usage: flash_and_drive.sh TREE YAML PORT KEY BROKER_HOST local|public|neg [SUB_PORT]"; exit 2; }
|
||||
case $MODE in local|public|neg) ;; *) echo "MODE must be local, public or neg"; exit 2;; esac
|
||||
pkill -f "[s]erial_capture.py $PORT "; sleep 1
|
||||
echo "=== $N: flash ($(date +%T))"
|
||||
(cd "$TREE" && PYTHONUNBUFFERED=1 timeout 300 $PY -m esphome upload "$YAML" --device "$PORT" > "$ULOG" 2>&1) || { echo "upload failed"; tail -5 "$ULOG"; exit 1; }
|
||||
SECS=200; [ "$MODE" = neg ] && SECS=100
|
||||
# a stale capture from an earlier run must not satisfy the wait below
|
||||
rm -f "$CAP"
|
||||
$PY "$HERE/../serial_capture.py" "$PORT" $SECS "$CAP" > "$PWD/cap-$N.stderr" 2>&1 &
|
||||
cap_pid=$!
|
||||
i=0; until grep -a -q "MQTT_EVENT_CONNECTED\|\[mqtt:[0-9]*\]: Connected\|mbedtls_ssl_handshake returned\|Failed to verify" "$CAP" 2>/dev/null || [ $i -ge 45 ]; do sleep 2; i=$((i+1)); done
|
||||
kill -0 $cap_pid 2>/dev/null && [ -f "$CAP" ] || { echo "serial capture is not running on $PORT"; tail -3 "$PWD/cap-$N.stderr"; exit 1; }
|
||||
DEV=$(grep -a -o 'IP Address: [0-9.]*' "$CAP" | head -1 | awk '{print $3}')
|
||||
if [ $i -ge 45 ] || [ -z "$DEV" ]; then
|
||||
echo "=== $N: no MQTT event or no IP within 90 s ($(date +%T))"
|
||||
[ "$MODE" = neg ] || { pkill -f "[s]erial_capture.py $PORT "; exit 1; }
|
||||
else
|
||||
echo "=== $N: first MQTT event after $((i*2)) s, device $DEV ($(date +%T))"
|
||||
fi
|
||||
grep -a 'ESPHome version\|\]: Transport\|\]: TLS:' "$CAP" | sed 's/\x1b\[[0-9;]*m//g' | cut -c1-120
|
||||
rc=0
|
||||
case $MODE in
|
||||
local) PYTHON=$PY sh "$HERE/cases.sh" "$N" "$KEY" "$B" "$SP" "$CAP" "$DEV" restart; rc=$?;;
|
||||
public) PYTHON=$PY sh "$HERE/cases.sh" "$N" "$KEY" "$B" "$SP" "$CAP" "$DEV"; rc=$?;;
|
||||
neg) sleep 70;;
|
||||
esac
|
||||
wait $cap_pid
|
||||
strip() { sed 's/\x1b\[[0-9;]*m//g'; }
|
||||
# count the backend's own events so the result does not depend on on_connect/on_disconnect log lines in the config
|
||||
connects=$(grep -a -c 'MQTT_EVENT_CONNECTED' "$CAP"); errors=$(grep -a -c 'mbedtls_ssl_handshake returned\|Failed to verify certificate' "$CAP")
|
||||
crashes=$(grep -a -c 'Guru\|abort()\|Backtrace' "$CAP")
|
||||
echo "=== $N: connects $connects, disconnects $(grep -a -c 'MQTT_EVENT_DISCONNECTED' "$CAP"), handshake errors $errors, crashes $crashes"
|
||||
grep -a 'mbedtls_ssl_handshake returned\|Failed to verify\|esp-tls' "$CAP" | strip | sed 's/^\[[^]]*\]//' | sort | uniq -c | sort -rn | head -4 | cut -c1-150
|
||||
grep -a '\[probe:' "$CAP" | strip | sed 's/.*\[probe:[0-9]*\]: //' | sed -n '1p;$p'
|
||||
[ -f "$PWD/mosquitto.log" ] && [ -n "$DEV" ] && echo "broker listeners used by $DEV: $(grep "New connection from $DEV" "$PWD/mosquitto.log" | sed 's/.*on port //' | sort | uniq -c | tr '\n' ';')"
|
||||
[ "$crashes" = 0 ] || { echo "device crashed $crashes time(s)"; exit 1; }
|
||||
if [ "$MODE" = neg ]; then
|
||||
[ "$connects" = 0 ] && [ "$errors" -gt 0 ] || { echo "negative case: expected no connect and a handshake error"; exit 1; }
|
||||
else
|
||||
[ "$rc" = 0 ] || { echo "cases.sh failed with status $rc"; exit 1; }
|
||||
fi
|
||||
@@ -1,21 +0,0 @@
|
||||
#!/bin/sh
|
||||
# make_test_ca.sh BROKER_IP : a throwaway CA, a server certificate for the broker address and a client certificate
|
||||
# (30 days), written into the working directory; run it in the scratch directory where a copy of mosquitto-ws.conf
|
||||
# lives. The device config takes ca.crt as certificate_authority (skip_cert_cn_check: true, the name check does not
|
||||
# match an address) and client.crt/client.key as client_certificate/client_certificate_key for the listener that
|
||||
# requires one; other-ca.crt is a second CA for the negative case. The CA carries basicConstraints and keyUsage
|
||||
# because Python's default SSL context (esphome logs, esphome clean-mqtt) rejects a CA without them.
|
||||
set -e
|
||||
IP=$1
|
||||
[ -n "$IP" ] || { echo "usage: make_test_ca.sh BROKER_IP"; exit 2; }
|
||||
openssl req -x509 -newkey rsa:2048 -nodes -keyout ca.key -out ca.crt -days 30 -subj "/CN=hwtest-ca" \
|
||||
-addext "basicConstraints=critical,CA:TRUE" -addext "keyUsage=critical,keyCertSign,cRLSign"
|
||||
openssl req -newkey rsa:2048 -nodes -keyout server.key -out server.csr -subj "/CN=hwtest-broker"
|
||||
printf "subjectAltName=IP:%s\nextendedKeyUsage=serverAuth\n" "$IP" > san.ext
|
||||
openssl x509 -req -in server.csr -CA ca.crt -CAkey ca.key -CAcreateserial -out server.crt -days 30 -extfile san.ext
|
||||
openssl req -newkey rsa:2048 -nodes -keyout client.key -out client.csr -subj "/CN=hwtest-client"
|
||||
printf "extendedKeyUsage=clientAuth\n" > client.ext
|
||||
openssl x509 -req -in client.csr -CA ca.crt -CAkey ca.key -CAcreateserial -out client.crt -days 30 -extfile client.ext
|
||||
openssl req -x509 -newkey rsa:2048 -nodes -keyout other-ca.key -out other-ca.crt -days 30 -subj "/CN=other-ca" \
|
||||
-addext "basicConstraints=critical,CA:TRUE" -addext "keyUsage=critical,keyCertSign,cRLSign"
|
||||
openssl verify -CAfile ca.crt server.crt client.crt
|
||||
@@ -1,26 +0,0 @@
|
||||
# Copy next to the certificates in the scratch directory and start it there with
|
||||
# `mosquitto -c mosquitto-ws.conf & echo $! > mosquitto.pid` (cases.sh restarts that PID): plain MQTT, MQTT over TLS,
|
||||
# MQTT over TLS that requires a client certificate, MQTT over WebSocket, and MQTT over WebSocket with TLS
|
||||
# (server.crt, server.key, ca.crt from make_test_ca.sh in the same directory). log_type all gives the listener port
|
||||
# per connection.
|
||||
listener 1883
|
||||
protocol mqtt
|
||||
listener 8883
|
||||
protocol mqtt
|
||||
certfile server.crt
|
||||
keyfile server.key
|
||||
listener 8884
|
||||
protocol mqtt
|
||||
certfile server.crt
|
||||
keyfile server.key
|
||||
cafile ca.crt
|
||||
require_certificate true
|
||||
listener 9001
|
||||
protocol websockets
|
||||
listener 9002
|
||||
protocol websockets
|
||||
certfile server.crt
|
||||
keyfile server.key
|
||||
allow_anonymous true
|
||||
log_type all
|
||||
log_dest file mosquitto.log
|
||||
@@ -1,6 +1,6 @@
|
||||
"""Bounded, timestamped serial capture that always exits and closes the port.
|
||||
|
||||
serial_capture.py PORT SECONDS OUTFILE [--baud 115200] [--released] [--reset] [--append] [--ms]
|
||||
serial_capture.py PORT SECONDS OUTFILE [--baud 115200] [--released] [--reset] [--append]
|
||||
|
||||
default open with DTR/RTS as pyserial leaves them (asserted); fine for ESP devkits and the Pico.
|
||||
--released drive DTR and RTS low before opening: the BW15 and BK7238 CH340 kits strap the boot pin
|
||||
@@ -76,21 +76,14 @@ def open_port(args: argparse.Namespace, path: str) -> serial.Serial:
|
||||
return s
|
||||
|
||||
|
||||
def write_line(out, tag: bytes, data: bytes, ms: bool = False) -> None:
|
||||
if ms:
|
||||
now = time.time()
|
||||
stamp = (
|
||||
time.strftime("[%H:%M:%S", time.localtime(now))
|
||||
+ f".{int(now * 1000) % 1000:03d}]"
|
||||
).encode()
|
||||
else:
|
||||
stamp = time.strftime("[%H:%M:%S]").encode()
|
||||
def write_line(out, tag: bytes, data: bytes) -> None:
|
||||
stamp = time.strftime("[%H:%M:%S]").encode()
|
||||
out.write(stamp + tag + ANSI.sub(b"", SECRET.sub(b"<secret>", data)) + b"\n")
|
||||
out.flush()
|
||||
|
||||
|
||||
def note(out, text: str, ms: bool = False) -> None:
|
||||
write_line(out, b"[capture] ", text.encode(), ms)
|
||||
def note(out, text: str) -> None:
|
||||
write_line(out, b"[capture] ", text.encode())
|
||||
|
||||
|
||||
def capture(args: argparse.Namespace, out) -> int:
|
||||
@@ -109,18 +102,18 @@ def capture(args: argparse.Namespace, out) -> int:
|
||||
if serial_number is None:
|
||||
serial_number, index = identify(path)
|
||||
if path != args.port:
|
||||
note(out, f"reopened as {path}", args.ms)
|
||||
note(out, f"reopened as {path}")
|
||||
except PORT_ERRORS as err:
|
||||
note(out, f"open failed: {err}", args.ms)
|
||||
note(out, f"open failed: {err}")
|
||||
time.sleep(1)
|
||||
continue
|
||||
try:
|
||||
data = s.read(4096)
|
||||
except PORT_ERRORS as err:
|
||||
if buf: # keep the cut-off line apart from the next boot's first line
|
||||
write_line(out, b"[partial]", buf, args.ms)
|
||||
write_line(out, b"[partial]", buf)
|
||||
buf = b""
|
||||
note(out, f"port lost: {err}", args.ms)
|
||||
note(out, f"port lost: {err}")
|
||||
with contextlib.suppress(*PORT_ERRORS):
|
||||
s.close()
|
||||
s = None
|
||||
@@ -132,9 +125,9 @@ def capture(args: argparse.Namespace, out) -> int:
|
||||
buf += data
|
||||
while b"\n" in buf:
|
||||
line, buf = buf.split(b"\n", 1)
|
||||
write_line(out, b"", line.rstrip(b"\r"), args.ms)
|
||||
write_line(out, b"", line.rstrip(b"\r"))
|
||||
if buf:
|
||||
write_line(out, b"[partial]", buf, args.ms)
|
||||
write_line(out, b"[partial]", buf)
|
||||
if s is not None:
|
||||
s.close()
|
||||
return received
|
||||
@@ -151,7 +144,6 @@ def main() -> int:
|
||||
ap.add_argument("--released", action="store_true")
|
||||
ap.add_argument("--reset", action="store_true")
|
||||
ap.add_argument("--append", action="store_true")
|
||||
ap.add_argument("--ms", action="store_true", help="millisecond timestamps")
|
||||
args = ap.parse_args()
|
||||
with pathlib.Path(args.outfile).open("ab" if args.append else "wb") as out:
|
||||
received = capture(args, out)
|
||||
|
||||
@@ -1,12 +0,0 @@
|
||||
#!/bin/sh
|
||||
# cases.sh HOST KEY MEDIA_URL ANN_URL CAPTURE LABEL : three play, announce, stop cycles on a speaker media player with the
|
||||
# "Task names" probe button pressed idle, during media, during the announcement, after it and after the stop.
|
||||
# KEY of - is plaintext. Serve FLAC files with `python3 -m http.server 8765 --directory www` (audio_http refuses WAV and MP3).
|
||||
H=$1; K=$2; MEDIA=$3; ANN=$4; LOG=$5; LABEL=$6; PY=${PYTHON:-python3}; HERE=$(dirname "$0")
|
||||
[ -r "$LOG" ] || { echo "usage: cases.sh HOST KEY MEDIA_URL ANN_URL CAPTURE LABEL (CAPTURE must be a readable file)"; exit 2; }
|
||||
show() { tail -n +$(($1+1)) "$LOG" | sed 's/\x1b\[[0-9;]*m//g' | grep -a '\[tasks:\|speaker_media_player\|speaker_mixer\|\[W\]\|\[E\]\|Guru\|abort\|Backtrace' | grep -a -v 'took a long time' | cut -c1-180; }
|
||||
for cycle in 1 2 3; do
|
||||
n0=$(wc -l < "$LOG"); echo "=== $LABEL cycle $cycle ($(date +%T))"
|
||||
$PY "$HERE/drive.py" "$H" "$K" "press:Task names" wait:1 "play:$MEDIA" wait:5 "press:Task names" wait:1 "ann:$ANN" wait:1.5 "press:Task names" wait:5 "press:Task names" wait:1 stop wait:3 "press:Task names" || { rc=$?; echo "driver failed ($rc), aborting"; exit $rc; }
|
||||
sleep 1; echo "--- device log:"; show "$n0"
|
||||
done
|
||||
@@ -1,50 +0,0 @@
|
||||
"""Drive the speaker platform media player (the first media player found) over one API connection.
|
||||
|
||||
usage: drive.py HOST KEY op [op ...]
|
||||
ops: play:URL | ann:URL | stop | press:BUTTON | wait:S
|
||||
"""
|
||||
|
||||
import asyncio
|
||||
import sys
|
||||
|
||||
from aioesphomeapi import APIClient, ButtonInfo, MediaPlayerCommand, MediaPlayerInfo
|
||||
|
||||
HOST, KEY, OPS = sys.argv[1], sys.argv[2], sys.argv[3:]
|
||||
|
||||
|
||||
async def main() -> None:
|
||||
c = APIClient(HOST, 6053, None, noise_psk=None if KEY == "-" else KEY)
|
||||
await c.connect(login=True)
|
||||
try:
|
||||
await run_ops(c)
|
||||
finally:
|
||||
await c.disconnect()
|
||||
|
||||
|
||||
async def run_ops(c: APIClient) -> None:
|
||||
ents, _ = await c.list_entities_services()
|
||||
player = next((e for e in ents if isinstance(e, MediaPlayerInfo)), None)
|
||||
if player is None:
|
||||
sys.exit("no media player on this device")
|
||||
buttons = {e.name: e for e in ents if isinstance(e, ButtonInfo)}
|
||||
for op in OPS:
|
||||
kind, _, rest = op.partition(":")
|
||||
print(f"{asyncio.get_running_loop().time():.1f} {op}", flush=True)
|
||||
if kind == "play":
|
||||
c.media_player_command(player.key, media_url=rest)
|
||||
elif kind == "ann":
|
||||
c.media_player_command(player.key, media_url=rest, announcement=True)
|
||||
elif kind == "stop":
|
||||
c.media_player_command(player.key, command=MediaPlayerCommand.STOP)
|
||||
elif kind == "press":
|
||||
if rest not in buttons:
|
||||
sys.exit(f"no button {rest!r}; have {sorted(buttons)}")
|
||||
c.button_command(buttons[rest].key)
|
||||
elif kind == "wait":
|
||||
await asyncio.sleep(float(rest))
|
||||
else:
|
||||
sys.exit(f"unknown op {op!r}")
|
||||
await asyncio.sleep(0.5)
|
||||
|
||||
|
||||
asyncio.run(main())
|
||||
@@ -1,40 +0,0 @@
|
||||
"""Compare the listener log (JSON lines from udp_listen.py) against the udp-write-dut.yaml payload sequence.
|
||||
|
||||
usage: check.py LISTEN_JSONL ECHO_HEX (ECHO_HEX is the datagram sent to the device for the echo case)
|
||||
"""
|
||||
|
||||
import json
|
||||
import pathlib
|
||||
import sys
|
||||
|
||||
with pathlib.Path(sys.argv[1]).open(encoding="utf-8") as f:
|
||||
log = [json.loads(line) for line in f if line.strip()]
|
||||
echo_in = bytes.fromhex(sys.argv[2])
|
||||
small = bytes([0xAA, 0x55, 0x01, 0x02])
|
||||
expected = [
|
||||
("small 1/2", small),
|
||||
("small 2/2", small),
|
||||
("simple", bytes([1, 2, 3])),
|
||||
("text", b"hello udp"),
|
||||
("empty", b""),
|
||||
("stack128", bytes((0x10 + i) & 0xFF for i in range(128))),
|
||||
("heap129", bytes((0x20 + i) & 0xFF for i in range(129))),
|
||||
("heap600", bytes((0x30 + i) & 0xFF for i in range(600))),
|
||||
("lambda300", bytes((i * 7) & 0xFF for i in range(300))),
|
||||
("echo", echo_in[::-1]),
|
||||
]
|
||||
got = [bytes.fromhex(e["hex"]) for e in log]
|
||||
ok = 0
|
||||
for i, (name, want) in enumerate(expected):
|
||||
have = got[i] if i < len(got) else None
|
||||
res = (
|
||||
"OK"
|
||||
if have == want
|
||||
else f"MISMATCH got {None if have is None else have[:16].hex() + '... len ' + str(len(have))}"
|
||||
)
|
||||
ok += res == "OK"
|
||||
print(f"{name:10s} {len(want):4d} B {res}")
|
||||
print(
|
||||
f"{ok}/{len(expected)} payloads byte-exact, {len(got)} datagrams received, sources {sorted({e['src'] for e in log})}"
|
||||
)
|
||||
sys.exit(0 if ok == len(expected) and len(got) == len(expected) else 1)
|
||||
@@ -1,32 +0,0 @@
|
||||
"""Log every datagram on PORT for SECONDS as one JSON line: time, source, length, hex payload."""
|
||||
|
||||
import json
|
||||
import pathlib
|
||||
import socket
|
||||
import sys
|
||||
import time
|
||||
|
||||
port, secs, out = int(sys.argv[1]), float(sys.argv[2]), sys.argv[3]
|
||||
s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
|
||||
s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
|
||||
s.bind(("", port))
|
||||
s.settimeout(1.0)
|
||||
end = time.monotonic() + secs
|
||||
with pathlib.Path(out).open("w", encoding="utf-8") as f:
|
||||
while time.monotonic() < end:
|
||||
try:
|
||||
data, (ip, sport) = s.recvfrom(65535)
|
||||
except TimeoutError:
|
||||
continue
|
||||
f.write(
|
||||
json.dumps(
|
||||
{
|
||||
"t": time.strftime("%H:%M:%S"),
|
||||
"src": ip,
|
||||
"len": len(data),
|
||||
"hex": data.hex(),
|
||||
}
|
||||
)
|
||||
+ "\n"
|
||||
)
|
||||
f.flush()
|
||||
@@ -1,22 +0,0 @@
|
||||
#!/bin/sh
|
||||
# write_cases.sh DEVICE_IP KEY [PORT] : drive a device built from templates/udp-write-dut.yaml. Records every datagram
|
||||
# the device sends to PORT (the udp component's port, default 18511) with udp_listen.py in the working directory,
|
||||
# presses the eight payload buttons over the API two seconds apart (KEY as for api_button.py, - for a plaintext API),
|
||||
# sends one 16 byte unicast datagram to the device for the echo case, then compares the recorded datagrams with
|
||||
# check.py. The recorder runs until the driver stops it. Exit 1 when the recorder did not start or a payload is
|
||||
# missing or differs; listen.jsonl stays in the working directory.
|
||||
HERE=$(cd "$(dirname "$0")" && pwd); PY=${PYTHON:-python3}; DEV=$1; KEY=$2; PORT=${3:-18511}
|
||||
[ -n "$DEV" ] && [ -n "$KEY" ] || { echo "usage: write_cases.sh DEVICE_IP KEY [PORT]"; exit 2; }
|
||||
ECHO=0102030405060708090a0b0c0d0e0f10
|
||||
rm -f "$PWD/listen.jsonl"
|
||||
$PY "$HERE/udp_listen.py" "$PORT" 600 "$PWD/listen.jsonl" &
|
||||
lst=$!
|
||||
sleep 2
|
||||
kill -0 $lst 2>/dev/null || { echo "udp_listen.py is not running on port $PORT"; exit 1; }
|
||||
for b in Small Simple Text Empty Stack128 Heap129 Heap600 Lambda300; do
|
||||
$PY "$HERE/../api_button.py" "$DEV" "$KEY" press "$b" > /dev/null || echo "press $b failed"; sleep 2
|
||||
done
|
||||
$PY -c "import socket; socket.socket(socket.AF_INET, socket.SOCK_DGRAM).sendto(bytes.fromhex('$ECHO'), ('$DEV', $PORT))"
|
||||
sleep 5
|
||||
kill $lst 2>/dev/null; wait $lst 2>/dev/null
|
||||
$PY "$HERE/check.py" "$PWD/listen.jsonl" "$ECHO"
|
||||
@@ -1,30 +0,0 @@
|
||||
"""Play a URL on the speaker_source media player over the API (no sync task involved).
|
||||
|
||||
usage: playurl.py HOST KEY URL [PLAYER_NAME]
|
||||
"""
|
||||
|
||||
import asyncio
|
||||
import sys
|
||||
|
||||
from aioesphomeapi import APIClient, MediaPlayerInfo
|
||||
|
||||
HOST, KEY, URL = sys.argv[1], sys.argv[2], sys.argv[3]
|
||||
PLAYER = sys.argv[4] if len(sys.argv) > 4 else "Player"
|
||||
|
||||
|
||||
async def main() -> None:
|
||||
c = APIClient(HOST, 6053, None, noise_psk=KEY)
|
||||
await c.connect(login=True)
|
||||
ents, _ = await c.list_entities_services()
|
||||
players = {e.name: e for e in ents if isinstance(e, MediaPlayerInfo)}
|
||||
print("media players:", sorted(players))
|
||||
if PLAYER not in players:
|
||||
sys.exit(f"no media player named {PLAYER!r}; have {sorted(players)}")
|
||||
p = players[PLAYER]
|
||||
c.media_player_command(p.key, media_url=URL)
|
||||
print("sent play_media to", PLAYER)
|
||||
await asyncio.sleep(1)
|
||||
await c.disconnect()
|
||||
|
||||
|
||||
asyncio.run(main())
|
||||
@@ -1,17 +0,0 @@
|
||||
#!/bin/sh
|
||||
# httpd_cases.sh HOST USER PASS LABEL CAPTURE : HTTPD task stack load for the web_server_idf task size; probe lines from
|
||||
# CAPTURE, SSE client output into the working directory. A failed step ends the run with its status.
|
||||
H=$1; U=$2; P=$3; LABEL=$4; LOG=$5; HERE=$(dirname "$0")
|
||||
[ -r "$LOG" ] || { echo "usage: httpd_cases.sh HOST USER PASS LABEL CAPTURE (CAPTURE must be a readable file)"; exit 2; }
|
||||
probes() { tail -n +$(($1+1)) "$LOG" | sed 's/\x1b\[[0-9;]*m//g' | grep -a -o "\[[0-9:]*\]\[I\]\[probe:[0-9]*\]: .*httpd min free stack [0-9]*\|\[[0-9:]*\]\[[WE]\]\[[a-z_.]*:[0-9]*\].*\|Guru.*" | grep -a -v "took a long time\|does not fit\|\]\[httpd\]: /" | sed 's/\[I\]\[probe:[0-9]*\]: loopTask min free stack \([0-9]*\), httpd min free stack \([0-9]*\)/ loop \1 httpd \2/' | uniq -f1 | cut -c1-140; }
|
||||
step() { n0=$(wc -l < "$LOG"); echo "=== $LABEL: $1 ($(date +%T))"; shift; "$@" || { rc=$?; echo "step failed ($rc)"; exit $rc; }; echo "--- device log:"; probes "$n0"; }
|
||||
step "idle 15 s" sleep 15
|
||||
step "request mix, 20 rounds" sh "$HERE/httpmix.sh" "$H" "$U" "$P" 20
|
||||
# Two SSE clients next to the request mix; arguments stay quoted, nothing is reparsed as shell code
|
||||
concurrent() {
|
||||
sh "$HERE/ssecurl.sh" "$H" "$U" "$P" 40 "$PWD/sse1-$LABEL.txt" & p1=$!
|
||||
sh "$HERE/ssecurl.sh" "$H" "$U" "$P" 40 "$PWD/sse2-$LABEL.txt" & p2=$!
|
||||
sh "$HERE/httpmix.sh" "$H" "$U" "$P" 12 && wait $p1 && wait $p2
|
||||
}
|
||||
step "2 SSE clients 40 s with the request mix alongside" concurrent
|
||||
step "idle 15 s after" sleep 15
|
||||
@@ -1,26 +0,0 @@
|
||||
#!/bin/sh
|
||||
# httpmix.sh HOST USER PASS ROUNDS : authenticated request mix (curl --anyauth follows the server's Basic or Digest
|
||||
# challenge): page, two json endpoints, a switch POST, a 404, an unauthenticated 401 and a 2 s SSE stream per round
|
||||
H=$1; U=$2; P=$3; N=$4; ok=0; bad=0
|
||||
# chk EXPECTED LABEL curl-args... : only LABEL is printed on a miss, never the argument list with the credentials
|
||||
chk() { exp=$1; label=$2; shift 2; c=$(curl -s -m 6 -o /dev/null -w "%{http_code}" "$@"); if [ "$c" = "$exp" ]; then ok=$((ok+1)); else bad=$((bad+1)); echo "expected $exp got $c: $label"; fi; }
|
||||
sse_tmp=$(mktemp)
|
||||
for i in $(seq 1 $N); do
|
||||
page=$(curl -s -m 6 -o /dev/null -w "%{http_code}" -u "$U:$P" --anyauth "http://$H/")
|
||||
if [ "$page" = 200 ]; then ok=$((ok+1)); else bad=$((bad+1)); echo "expected 200 got $page: /"; fi
|
||||
chk 200 "GET /sensor/Fast%201" -u "$U:$P" --anyauth "http://$H/sensor/Fast%201"
|
||||
chk 200 "GET /text_sensor/Big" -u "$U:$P" --anyauth "http://$H/text_sensor/Big"
|
||||
chk 200 "GET /switch/Toggle" -u "$U:$P" --anyauth "http://$H/switch/Toggle"
|
||||
chk 200 "POST /switch/Toggle/toggle" -u "$U:$P" --anyauth -X POST -H "Content-Length: 0" "http://$H/switch/Toggle/toggle"
|
||||
# The IDF server closes an unknown path without a response: curl ends with 52 (empty reply) or 56 (reset), never a
|
||||
# timeout (28) or a refused connection (7); only trust the close when the page just answered
|
||||
c=$(curl -s -m 6 -o /dev/null -w "%{http_code}" -u "$U:$P" --anyauth "http://$H/nonexistent"); rc=$?
|
||||
if [ "$c" = 000 ] && [ "$page" = 200 ] && { [ "$rc" = 52 ] || [ "$rc" = 56 ]; }; then ok=$((ok+1)); else bad=$((bad+1)); echo "unknown path: got $c, curl status $rc, with the page at $page"; fi
|
||||
chk 401 "GET / without credentials" "http://$H/"
|
||||
timeout 2 curl -s -N -u "$U:$P" --anyauth -o "$sse_tmp" "http://$H/events" 2>/dev/null; rc=$?
|
||||
if [ "$rc" = 124 ] && grep -q "^event: state" "$sse_tmp"; then ok=$((ok+1)); else bad=$((bad+1)); echo "SSE stream: curl status $rc, $(grep -c '^event: state' "$sse_tmp") state events"; fi
|
||||
sleep 1
|
||||
done
|
||||
rm -f "$sse_tmp"
|
||||
echo "httpmix: $ok ok, $bad unexpected"
|
||||
[ "$bad" = 0 ]
|
||||
@@ -1,187 +0,0 @@
|
||||
"""SSE client(s) for a web_server /events stream: counts state events and checks each is valid JSON.
|
||||
|
||||
usage: sse.py HOST SECONDS [--clients N] [--stall] [--churn CYCLES]
|
||||
--stall opens one extra connection that never reads (the device's socket buffer fills); --churn opens
|
||||
and abruptly closes a connection CYCLES times, 2 s apart, next to the reading clients.
|
||||
"""
|
||||
|
||||
import argparse
|
||||
from collections import Counter
|
||||
import contextlib
|
||||
import json
|
||||
import socket
|
||||
import sys
|
||||
import threading
|
||||
import time
|
||||
|
||||
ap = argparse.ArgumentParser()
|
||||
ap.add_argument("host")
|
||||
ap.add_argument("seconds", type=float)
|
||||
ap.add_argument("--clients", type=int, default=1)
|
||||
ap.add_argument("--stall", action="store_true")
|
||||
ap.add_argument("--churn", type=int, default=0)
|
||||
args = ap.parse_args()
|
||||
|
||||
REQ = b"GET /events HTTP/1.1\r\nHost: %s\r\nAccept: text/event-stream\r\nConnection: keep-alive\r\n\r\n"
|
||||
|
||||
|
||||
def read_chunked(sock, deadline, on_line):
|
||||
"""Decode HTTP chunked transfer encoding and feed complete event-stream lines to on_line."""
|
||||
buf = b""
|
||||
body = b""
|
||||
headers_done = False
|
||||
sock.settimeout(1.0)
|
||||
while time.monotonic() < deadline:
|
||||
try:
|
||||
data = sock.recv(65536)
|
||||
except TimeoutError:
|
||||
continue
|
||||
if not data:
|
||||
return "closed"
|
||||
buf += data
|
||||
if not headers_done:
|
||||
i = buf.find(b"\r\n\r\n")
|
||||
if i < 0:
|
||||
continue
|
||||
headers_done = True
|
||||
buf = buf[i + 4 :]
|
||||
while True:
|
||||
i = buf.find(b"\r\n")
|
||||
if i < 0:
|
||||
break
|
||||
size = int(buf[:i].split(b";")[0], 16)
|
||||
if len(buf) < i + 2 + size + 2:
|
||||
break
|
||||
body += buf[i + 2 : i + 2 + size]
|
||||
buf = buf[i + 2 + size + 2 :]
|
||||
if size == 0:
|
||||
return "closed"
|
||||
while b"\n" in body:
|
||||
line, body = body.split(b"\n", 1)
|
||||
on_line(line.rstrip(b"\r"))
|
||||
return "deadline"
|
||||
|
||||
|
||||
class Client(threading.Thread):
|
||||
def __init__(self, idx, seconds):
|
||||
super().__init__(daemon=True)
|
||||
self.idx = idx
|
||||
self.seconds = seconds
|
||||
self.events = Counter()
|
||||
self.ids = Counter()
|
||||
self.invalid = 0
|
||||
self.max_data = 0
|
||||
self.bytes = 0
|
||||
self.end = "?"
|
||||
self.cur_event = None
|
||||
|
||||
def on_line(self, line):
|
||||
self.bytes += len(line) + 1
|
||||
if line.startswith(b"event:"):
|
||||
self.cur_event = line[6:].strip().decode()
|
||||
elif line.startswith(b"data:"):
|
||||
ev = self.cur_event or "message"
|
||||
self.events[ev] += 1
|
||||
data = line[5:].strip()
|
||||
self.max_data = max(self.max_data, len(data))
|
||||
if ev in ("state", "state_detail_all"):
|
||||
try:
|
||||
obj = json.loads(data)
|
||||
self.ids[obj.get("id", "?")] += 1
|
||||
except ValueError:
|
||||
self.invalid += 1
|
||||
elif line == b"":
|
||||
self.cur_event = None
|
||||
|
||||
def run(self):
|
||||
try:
|
||||
s = socket.create_connection((args.host, 80), timeout=5)
|
||||
s.sendall(REQ % args.host.encode())
|
||||
self.end = read_chunked(s, time.monotonic() + self.seconds, self.on_line)
|
||||
s.close()
|
||||
except (OSError, ValueError) as e:
|
||||
self.end = f"error: {e}"
|
||||
|
||||
|
||||
clients = [Client(i, args.seconds) for i in range(args.clients)]
|
||||
for c in clients:
|
||||
c.start()
|
||||
time.sleep(0.3)
|
||||
|
||||
stall_sock = None
|
||||
if args.stall:
|
||||
# The window scale is negotiated in the SYN, so the small buffer must be set before connect()
|
||||
stall_sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
|
||||
stall_sock.setsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF, 2048)
|
||||
stall_sock.settimeout(5)
|
||||
stall_sock.connect((args.host, 80))
|
||||
stall_sock.sendall(REQ % args.host.encode())
|
||||
print("stalled client opened (never reads)", flush=True)
|
||||
|
||||
churn_done = 0
|
||||
for _ in range(args.churn):
|
||||
try:
|
||||
cs = socket.create_connection((args.host, 80), timeout=5)
|
||||
cs.sendall(REQ % args.host.encode())
|
||||
cs.settimeout(1.0)
|
||||
with contextlib.suppress(TimeoutError):
|
||||
cs.recv(4096)
|
||||
cs.setsockopt(
|
||||
socket.SOL_SOCKET, socket.SO_LINGER, b"\x01\x00\x00\x00\x00\x00\x00\x00"
|
||||
) # RST on close
|
||||
cs.close()
|
||||
churn_done += 1
|
||||
except OSError as e:
|
||||
print("churn error", e, flush=True)
|
||||
time.sleep(2)
|
||||
if args.churn:
|
||||
print(f"churn: {churn_done}/{args.churn} abrupt closes", flush=True)
|
||||
|
||||
for c in clients:
|
||||
c.join()
|
||||
stall_closed = None
|
||||
if stall_sock is not None:
|
||||
# Drain what the small buffer holds: a close shows as b"" or a reset after it. A session the device left
|
||||
# open keeps feeding events, so the drain has its own deadline and data past it means "still open".
|
||||
stall_sock.settimeout(2.0)
|
||||
drain_deadline = time.monotonic() + 5.0
|
||||
try:
|
||||
while stall_sock.recv(65536):
|
||||
if time.monotonic() > drain_deadline:
|
||||
break
|
||||
else:
|
||||
stall_closed = True
|
||||
except TimeoutError:
|
||||
pass
|
||||
except OSError:
|
||||
stall_closed = True
|
||||
if stall_closed is None:
|
||||
stall_closed = False
|
||||
print(
|
||||
"stalled client: closed by device"
|
||||
if stall_closed
|
||||
else "stalled client: still open",
|
||||
flush=True,
|
||||
)
|
||||
stall_sock.close()
|
||||
|
||||
for c in clients:
|
||||
states = c.events["state"]
|
||||
print(
|
||||
f"client {c.idx}: {c.end}, {states} state events, {c.invalid} invalid JSON, max data {c.max_data} B, "
|
||||
f"{c.bytes} B, other events { {k: v for k, v in c.events.items() if k != 'state'} }",
|
||||
flush=True,
|
||||
)
|
||||
print(" per id:", dict(sorted(c.ids.items())), flush=True)
|
||||
|
||||
failed = [
|
||||
c for c in clients if c.end != "deadline" or c.invalid or not c.events["state"]
|
||||
]
|
||||
if failed:
|
||||
sys.exit(
|
||||
f"{len(failed)} client(s) did not run clean to the deadline with valid state events"
|
||||
)
|
||||
if stall_closed is False:
|
||||
sys.exit("stalled session was not closed by the device")
|
||||
if churn_done < args.churn:
|
||||
sys.exit(f"only {churn_done} of {args.churn} churn connections were made")
|
||||
@@ -1,19 +0,0 @@
|
||||
#!/bin/sh
|
||||
# sse_cases.sh HOST KEY LABEL CAPTURE : the SSE cases against templates/web-server-sse-dut.yaml with a console capture
|
||||
# running into CAPTURE; KEY is the API key (- for plaintext). The burst client output goes to the working directory.
|
||||
H=$1; K=$2; LABEL=$3; LOG=$4; PY=${PYTHON:-python3}; HERE=$(dirname "$0"); BTN=$HERE/../api_button.py
|
||||
[ -r "$LOG" ] || { echo "usage: sse_cases.sh HOST KEY LABEL CAPTURE (CAPTURE must be a readable file)"; exit 2; }
|
||||
show() { tail -n +$(($1+1)) "$LOG" | sed 's/\x1b\[[0-9;]*m//g' | grep -a '\[probe:\|\[W\]\|\[E\]\|web_server\|Guru\|abort\|Backtrace\|ESPHome version' | grep -a -v 'took a long time' | cut -c1-200; }
|
||||
step() { n0=$(wc -l < "$LOG"); echo "=== $LABEL: $1 ($(date +%T))"; shift; "$@" || { rc=$?; echo "client failed ($rc), aborting"; exit $rc; }; echo "--- device log:"; show "$n0"; }
|
||||
step "idle 15 s, no client" sleep 15
|
||||
step "1 client 60 s" $PY "$HERE/sse.py" "$H" 60 --clients 1
|
||||
step "4 clients 60 s" $PY "$HERE/sse.py" "$H" 60 --clients 4
|
||||
step "1 reader plus a stalled client 45 s" $PY "$HERE/sse.py" "$H" 45 --clients 1 --stall
|
||||
step "1 reader plus 10 abrupt closes 30 s" $PY "$HERE/sse.py" "$H" 30 --clients 1 --churn 10
|
||||
n0=$(wc -l < "$LOG"); echo "=== $LABEL: 2 clients 25 s with the Burst button at 5 s ($(date +%T))"
|
||||
$PY "$HERE/sse.py" "$H" 25 --clients 2 > "$PWD/burst-$LABEL.txt" 2>&1 &
|
||||
pid=$!
|
||||
sleep 5; $PY "$BTN" "$H" "$K" press "Burst" || { echo "button press failed"; exit 1; }
|
||||
wait $pid || { cat "$PWD/burst-$LABEL.txt"; echo "SSE clients failed during the burst"; exit 1; }
|
||||
cat "$PWD/burst-$LABEL.txt"; echo "--- device log:"; show "$n0"
|
||||
step "idle 15 s after" sleep 15
|
||||
@@ -1,25 +0,0 @@
|
||||
#!/bin/sh
|
||||
# ssecurl.sh HOST USER PASS SECONDS OUT : one authenticated SSE client through curl; counts state events and checks JSON
|
||||
H=$1; U=$2; P=$3; T=$4; OUT=$5
|
||||
timeout "$T" curl -sS -f -N -u "$U:$P" --anyauth "http://$H/events" > "$OUT"; rc=$?
|
||||
[ "$rc" = 124 ] || { echo "sse: curl ended with status $rc before the $T s deadline"; exit 1; }
|
||||
python3 - "$OUT" <<'PY'
|
||||
import json, sys
|
||||
states = invalid = 0; biggest = 0; ev = None
|
||||
data = open(sys.argv[1], "rb").read()
|
||||
lines = data.split(b"\n")
|
||||
if not data.endswith(b"\n"):
|
||||
lines = lines[:-1] # the deadline can cut the last line in half; only complete lines are checked
|
||||
for line in lines:
|
||||
line = line.rstrip(b"\r")
|
||||
if line.startswith(b"event:"):
|
||||
ev = line[6:].strip()
|
||||
elif line.startswith(b"data:") and ev == b"state":
|
||||
states += 1; d = line[5:].strip(); biggest = max(biggest, len(d))
|
||||
try: json.loads(d)
|
||||
except ValueError: invalid += 1
|
||||
elif line == b"":
|
||||
ev = None
|
||||
print(f"sse: {states} state events, {invalid} invalid JSON, largest {biggest} B")
|
||||
sys.exit(1 if invalid or not states else 0)
|
||||
PY
|
||||
@@ -1,66 +0,0 @@
|
||||
# Needs packages/aux-2-pre-prod.yaml from NabuCasa/aux-2 at commit 283f2e64 next to this file (see
|
||||
# reference/recipes/usb_audio.md). The AUX-2 package with the package's speaker_source player swapped for the speaker
|
||||
# platform player, which is the one built on speaker/media_player/audio_pipeline.cpp, plus the task name probe.
|
||||
|
||||
packages:
|
||||
core: !include aux-2-pre-prod.yaml
|
||||
|
||||
esphome:
|
||||
name: aux-2-dut
|
||||
name_add_mac_suffix: false
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
|
||||
logger:
|
||||
level: DEBUG
|
||||
|
||||
sendspin:
|
||||
unpaired_access: true
|
||||
|
||||
media_player:
|
||||
- id: !remove external_media_player
|
||||
- platform: speaker
|
||||
id: speaker_media_player
|
||||
name: Media Player
|
||||
volume_increment: 0.05
|
||||
volume_min: 0.4
|
||||
volume_max: 0.85
|
||||
announcement_pipeline:
|
||||
speaker: announcement_resampling_speaker
|
||||
format: FLAC
|
||||
num_channels: 1
|
||||
sample_rate: 48000
|
||||
media_pipeline:
|
||||
speaker: media_resampling_speaker
|
||||
format: FLAC
|
||||
num_channels: 2
|
||||
sample_rate: 48000
|
||||
on_announcement:
|
||||
- mixer_speaker.apply_ducking:
|
||||
id: media_mixing_input
|
||||
decibel_reduction: 20
|
||||
duration: 0.0s
|
||||
|
||||
button:
|
||||
- platform: template
|
||||
name: Task names
|
||||
on_press:
|
||||
- lambda: |-
|
||||
static const char *const NAMES[] = {"ann_read", "ann_decode", "med_read", "med_decode"};
|
||||
for (const char *n : NAMES) {
|
||||
TaskHandle_t h = xTaskGetHandle(n);
|
||||
if (h == nullptr) {
|
||||
ESP_LOGI("tasks", "%s: missing", n);
|
||||
} else {
|
||||
ESP_LOGI("tasks", "%s: found as '%s', stack high water %u", n, pcTaskGetName(h),
|
||||
(unsigned) uxTaskGetStackHighWaterMark(h));
|
||||
}
|
||||
}
|
||||
ESP_LOGI("tasks", "internal free %u, largest block %u", (unsigned) heap_caps_get_free_size(MALLOC_CAP_INTERNAL),
|
||||
(unsigned) heap_caps_get_largest_free_block(MALLOC_CAP_INTERNAL));
|
||||
@@ -1,23 +0,0 @@
|
||||
# Needs packages/aux-2-pre-prod.yaml from NabuCasa/aux-2 at commit 283f2e64 next to this file, with its local
|
||||
# external_components source pointed at github://NabuCasa/aux-2@main (see reference/recipes/usb_audio.md).
|
||||
# Nabu Casa Connect AUX-2 on the usb_audio PR tree: stock package (I2S PCM5122 output) as a control.
|
||||
packages:
|
||||
core: !include aux-2-pre-prod.yaml
|
||||
|
||||
esphome:
|
||||
name: aux-2-dut
|
||||
name_add_mac_suffix: false
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
|
||||
logger:
|
||||
level: DEBUG
|
||||
|
||||
sendspin:
|
||||
unpaired_access: true
|
||||
@@ -1,39 +0,0 @@
|
||||
# Needs packages/aux-2-pre-prod.yaml from NabuCasa/aux-2 at commit 283f2e64 next to this file, with its local
|
||||
# external_components source pointed at github://NabuCasa/aux-2@main (see reference/recipes/usb_audio.md).
|
||||
# Nabu Casa Connect AUX-2 on the usb_audio PR tree: the Anker S330 on the USB host port as the mixer output.
|
||||
packages:
|
||||
core: !include aux-2-pre-prod.yaml
|
||||
|
||||
esphome:
|
||||
name: aux-2-usb-dut
|
||||
name_add_mac_suffix: false
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
|
||||
logger:
|
||||
level: DEBUG
|
||||
baud_rate: 0
|
||||
|
||||
sendspin:
|
||||
unpaired_access: true
|
||||
|
||||
usb_audio:
|
||||
id: usb_audio_id
|
||||
|
||||
speaker:
|
||||
- platform: usb_audio
|
||||
id: usb_speaker
|
||||
usb_audio_id: usb_audio_id
|
||||
sample_rate: 48000
|
||||
bits_per_sample: 24bit
|
||||
num_channels: 2
|
||||
buffer_size: 28800
|
||||
write_timeout: 50ms
|
||||
- id: !extend mixing_speaker
|
||||
output_speaker: usb_speaker
|
||||
@@ -1,27 +0,0 @@
|
||||
# CAST PRO-1 control for the sendspin sync comparison: Apollo's current package, DEBUG logging as on the S3.
|
||||
esphome:
|
||||
name: "cast-pro-1-dut"
|
||||
friendly_name: CAST PRO-1 test
|
||||
project:
|
||||
name: "ApolloAutomation.CAST_PRO-1"
|
||||
version: ${version}
|
||||
|
||||
packages:
|
||||
core: !include Core.yaml
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
enable_on_boot: false
|
||||
|
||||
logger:
|
||||
level: DEBUG
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
|
||||
sendspin:
|
||||
manufacturer: Apollo
|
||||
model: CAST PRO-1 control
|
||||
unpaired_access: true
|
||||
@@ -1,46 +0,0 @@
|
||||
# Deep sleep wake timing for the outgoing API connection: boot -> dial -> client hello -> first HA state.
|
||||
esphome:
|
||||
name: deep-sleep-dut
|
||||
on_boot:
|
||||
priority: -100
|
||||
then:
|
||||
- lambda: ESP_LOGI("timing", "setup done at %u ms", (unsigned) millis());
|
||||
|
||||
esp32:
|
||||
board: esp32dev
|
||||
framework:
|
||||
type: esp-idf
|
||||
|
||||
logger:
|
||||
level: DEBUG
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
fast_connect: true
|
||||
on_connect:
|
||||
- lambda: ESP_LOGI("timing", "wifi connected at %u ms", (unsigned) millis());
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
outgoing_connection:
|
||||
on_client_connected:
|
||||
- lambda: ESP_LOGI("timing", "client connected at %u ms (%s %s)", (unsigned) millis(), client_info.c_str(), client_address.c_str());
|
||||
on_client_disconnected:
|
||||
- lambda: ESP_LOGI("timing", "client disconnected at %u ms", (unsigned) millis());
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
text_sensor:
|
||||
- platform: homeassistant
|
||||
id: ha_state
|
||||
entity_id: light.ENTITY
|
||||
on_value:
|
||||
- lambda: ESP_LOGI("timing", "first HA state '%s' at %u ms", x.c_str(), (unsigned) millis());
|
||||
|
||||
deep_sleep:
|
||||
id: ds
|
||||
run_duration: 15s
|
||||
sleep_duration: 15s
|
||||
@@ -1,186 +0,0 @@
|
||||
# DFRobot SEN0395 on an ESP32 DevKit V1: V to VIN (5 V), G to GND, sensor TX to GPIO16 (RX2), sensor RX to GPIO17 (TX2),
|
||||
# IO2 to GPIO18, I1 unconnected. Settings buttons, the four switches and junk-line buttons whose echo and
|
||||
# "is not recognized" reply come back as lines of known length (220 and 240 bytes give replies over 252 chars).
|
||||
esp32:
|
||||
board: esp32dev
|
||||
framework:
|
||||
type: esp-idf
|
||||
|
||||
logger:
|
||||
level: VERBOSE
|
||||
logs:
|
||||
api: DEBUG
|
||||
api.connection: DEBUG
|
||||
api.service: DEBUG
|
||||
wifi: DEBUG
|
||||
mdns: DEBUG
|
||||
scheduler: DEBUG
|
||||
component: DEBUG
|
||||
esp32: DEBUG
|
||||
uart: DEBUG
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
reboot_timeout: 0s
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
uart:
|
||||
id: mmwave_uart
|
||||
tx_pin: GPIO17
|
||||
rx_pin: GPIO16
|
||||
baud_rate: 115200
|
||||
|
||||
dfrobot_sen0395:
|
||||
id: mmwave
|
||||
uart_id: mmwave_uart
|
||||
|
||||
binary_sensor:
|
||||
- platform: dfrobot_sen0395
|
||||
dfrobot_sen0395_id: mmwave
|
||||
name: Detected via UART
|
||||
id: uart_detected
|
||||
- platform: gpio
|
||||
name: Detected via GPIO
|
||||
device_class: motion
|
||||
pin:
|
||||
number: GPIO18
|
||||
mode: INPUT_PULLDOWN
|
||||
|
||||
switch:
|
||||
- platform: dfrobot_sen0395
|
||||
dfrobot_sen0395_id: mmwave
|
||||
type: sensor_active
|
||||
name: Sensor active
|
||||
- platform: dfrobot_sen0395
|
||||
dfrobot_sen0395_id: mmwave
|
||||
type: presence_via_uart
|
||||
name: Presence via UART
|
||||
- platform: dfrobot_sen0395
|
||||
dfrobot_sen0395_id: mmwave
|
||||
type: turn_on_led
|
||||
name: LED
|
||||
- platform: dfrobot_sen0395
|
||||
dfrobot_sen0395_id: mmwave
|
||||
type: start_after_boot
|
||||
name: Start after boot
|
||||
|
||||
button:
|
||||
- platform: template
|
||||
name: Range 0 to 3m
|
||||
on_press:
|
||||
- dfrobot_sen0395.settings:
|
||||
id: mmwave
|
||||
detection_segments:
|
||||
- [0cm, 3m]
|
||||
- platform: template
|
||||
name: Range 0 to 9m
|
||||
on_press:
|
||||
- dfrobot_sen0395.settings:
|
||||
id: mmwave
|
||||
detection_segments:
|
||||
- [0cm, 9m]
|
||||
- platform: template
|
||||
name: Latency 1s 2s
|
||||
on_press:
|
||||
- dfrobot_sen0395.settings:
|
||||
id: mmwave
|
||||
output_latency:
|
||||
delay_after_detect: 1s
|
||||
delay_after_disappear: 2s
|
||||
- platform: template
|
||||
name: Latency 0 0
|
||||
on_press:
|
||||
- dfrobot_sen0395.settings:
|
||||
id: mmwave
|
||||
output_latency:
|
||||
delay_after_detect: 0s
|
||||
delay_after_disappear: 0s
|
||||
- platform: template
|
||||
name: Sensitivity 7
|
||||
on_press:
|
||||
- dfrobot_sen0395.settings:
|
||||
id: mmwave
|
||||
sensitivity: 7
|
||||
- platform: template
|
||||
name: Factory reset
|
||||
on_press:
|
||||
- dfrobot_sen0395.settings:
|
||||
id: mmwave
|
||||
factory_reset: true
|
||||
- platform: template
|
||||
name: Reset
|
||||
on_press:
|
||||
- dfrobot_sen0395.reset:
|
||||
id: mmwave
|
||||
- platform: template
|
||||
name: Junk 100
|
||||
on_press:
|
||||
- uart.write:
|
||||
id: mmwave_uart
|
||||
data: !lambda |-
|
||||
std::vector<uint8_t> v(100, 'x');
|
||||
v.push_back('\r');
|
||||
v.push_back('\n');
|
||||
return v;
|
||||
- platform: template
|
||||
name: Junk 160
|
||||
on_press:
|
||||
- uart.write:
|
||||
id: mmwave_uart
|
||||
data: !lambda |-
|
||||
std::vector<uint8_t> v(160, 'x');
|
||||
v.push_back('\r');
|
||||
v.push_back('\n');
|
||||
return v;
|
||||
- platform: template
|
||||
name: Junk 200
|
||||
on_press:
|
||||
- uart.write:
|
||||
id: mmwave_uart
|
||||
data: !lambda |-
|
||||
std::vector<uint8_t> v(200, 'x');
|
||||
v.push_back('\r');
|
||||
v.push_back('\n');
|
||||
return v;
|
||||
- platform: template
|
||||
name: Junk 220
|
||||
on_press:
|
||||
- uart.write:
|
||||
id: mmwave_uart
|
||||
data: !lambda |-
|
||||
std::vector<uint8_t> v(220, 'x');
|
||||
v.push_back('\r');
|
||||
v.push_back('\n');
|
||||
return v;
|
||||
- platform: template
|
||||
name: Junk 240
|
||||
on_press:
|
||||
- uart.write:
|
||||
id: mmwave_uart
|
||||
data: !lambda |-
|
||||
std::vector<uint8_t> v(240, 'x');
|
||||
v.push_back('\r');
|
||||
v.push_back('\n');
|
||||
return v;
|
||||
- platform: template
|
||||
name: Junk 256
|
||||
on_press:
|
||||
- uart.write:
|
||||
id: mmwave_uart
|
||||
data: !lambda |-
|
||||
std::vector<uint8_t> v(256, 'x');
|
||||
v.push_back('\r');
|
||||
v.push_back('\n');
|
||||
return v;
|
||||
|
||||
interval:
|
||||
- interval: 30s
|
||||
then:
|
||||
- lambda: 'ESP_LOGI("sen", "alive uart_detected=%d heap=%u", id(uart_detected).state, (unsigned) esp_get_free_heap_size());'
|
||||
@@ -1,148 +0,0 @@
|
||||
# Entity icon and device class readback (esphome#21111): the per-run file supplies name and broker_ip through substitutions and includes this file as a package. Every readback path is covered: API listing, MQTT discovery, web_server JSON and dump_config. See reference/recipes/web_server.md.
|
||||
esp8266:
|
||||
board: d1_mini
|
||||
|
||||
logger:
|
||||
level: DEBUG
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
power_save_mode: none
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
reboot_timeout: 0s
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
web_server:
|
||||
port: 80
|
||||
|
||||
mqtt:
|
||||
broker: ${broker_ip}
|
||||
reboot_timeout: 0s
|
||||
|
||||
interval:
|
||||
- interval: 10s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGI("probe", "free heap %u, max block %u", (unsigned) ESP.getFreeHeap(), (unsigned) ESP.getMaxFreeBlockSize());
|
||||
|
||||
esphome:
|
||||
name: ${name}
|
||||
|
||||
sensor:
|
||||
- platform: template
|
||||
name: Temp
|
||||
id: temp
|
||||
device_class: temperature
|
||||
unit_of_measurement: "°C"
|
||||
icon: mdi:thermometer
|
||||
accuracy_decimals: 1
|
||||
lambda: return 21.5;
|
||||
update_interval: 30s
|
||||
- platform: template
|
||||
name: Long Icon
|
||||
id: long_icon
|
||||
icon: mdi:this-icon-name-is-exactly-sixty-three-characters-long-abcde
|
||||
device_class: humidity
|
||||
unit_of_measurement: "%"
|
||||
lambda: return 40.0;
|
||||
update_interval: 30s
|
||||
- platform: template
|
||||
name: Plain
|
||||
id: plain
|
||||
lambda: return 1.0;
|
||||
update_interval: 30s
|
||||
- platform: template
|
||||
name: Hidden
|
||||
id: hidden
|
||||
internal: true
|
||||
icon: mdi:eye-off
|
||||
device_class: power
|
||||
lambda: return 2.0;
|
||||
update_interval: 30s
|
||||
|
||||
binary_sensor:
|
||||
- platform: template
|
||||
name: Motion
|
||||
id: motion
|
||||
device_class: motion
|
||||
icon: mdi:motion-sensor
|
||||
lambda: return false;
|
||||
|
||||
switch:
|
||||
- platform: template
|
||||
name: Relay
|
||||
id: relay
|
||||
device_class: outlet
|
||||
icon: mdi:power-plug
|
||||
optimistic: true
|
||||
|
||||
button:
|
||||
- platform: template
|
||||
name: Reboot
|
||||
id: reboot_btn
|
||||
device_class: restart
|
||||
icon: mdi:restart
|
||||
on_press:
|
||||
- logger.log: "Reboot pressed"
|
||||
|
||||
text_sensor:
|
||||
- platform: template
|
||||
name: Version
|
||||
id: version
|
||||
device_class: timestamp
|
||||
icon: mdi:tag
|
||||
lambda: return {"2026-10-21T00:00:00+00:00"};
|
||||
update_interval: 30s
|
||||
|
||||
number:
|
||||
- platform: template
|
||||
name: Level
|
||||
id: level
|
||||
device_class: battery
|
||||
icon: mdi:knob
|
||||
unit_of_measurement: "%"
|
||||
min_value: 0
|
||||
max_value: 100
|
||||
step: 1
|
||||
optimistic: true
|
||||
initial_value: 50
|
||||
|
||||
select:
|
||||
- platform: template
|
||||
name: Mode
|
||||
id: mode
|
||||
icon: mdi:format-list-bulleted
|
||||
options: [a, b, c]
|
||||
optimistic: true
|
||||
initial_option: a
|
||||
|
||||
event:
|
||||
- platform: template
|
||||
name: Doorbell
|
||||
id: doorbell
|
||||
device_class: doorbell
|
||||
icon: mdi:doorbell
|
||||
event_types: [ring, knock]
|
||||
|
||||
cover:
|
||||
- platform: template
|
||||
name: Garage
|
||||
id: garage
|
||||
device_class: garage
|
||||
icon: mdi:garage
|
||||
optimistic: true
|
||||
|
||||
text:
|
||||
- platform: template
|
||||
name: Secret Note
|
||||
id: note
|
||||
mode: password
|
||||
icon: mdi:form-textbox-password
|
||||
optimistic: true
|
||||
initial_value: "x"
|
||||
@@ -1,66 +0,0 @@
|
||||
# Restoring globals with every storage choice; each boot bumps the counters, logs them with the reset reason, saves
|
||||
# and syncs; odd boots soft restart, even boots deep sleep (ESP32) or idle (D1 mini). The host's reset pulse and a
|
||||
# power cut give the other reset kinds.
|
||||
logger:
|
||||
level: DEBUG
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 1s
|
||||
|
||||
globals:
|
||||
- id: cnt_rtc
|
||||
type: int
|
||||
restore_value: true
|
||||
storage: rtc
|
||||
initial_value: "0"
|
||||
- id: cnt_flash
|
||||
type: int
|
||||
restore_value: true
|
||||
storage: flash
|
||||
initial_value: "0"
|
||||
- id: cnt_default
|
||||
type: int
|
||||
restore_value: true
|
||||
initial_value: "0"
|
||||
- id: str_rtc
|
||||
type: std::string
|
||||
restore_value: true
|
||||
storage: rtc
|
||||
max_restore_data_length: 24
|
||||
initial_value: '"fresh"'
|
||||
- id: arr_rtc
|
||||
type: uint8_t[2]
|
||||
restore_value: true
|
||||
storage: rtc
|
||||
initial_value: "{0, 0}"
|
||||
|
||||
esphome:
|
||||
on_boot:
|
||||
priority: -100
|
||||
then:
|
||||
- lambda: |-
|
||||
id(cnt_rtc) += 1;
|
||||
id(cnt_flash) += 1;
|
||||
id(cnt_default) += 1;
|
||||
id(arr_rtc)[0] += 1;
|
||||
id(arr_rtc)[1] += 2;
|
||||
char buf[24];
|
||||
snprintf(buf, sizeof(buf), "boot%d", id(cnt_rtc));
|
||||
ESP_LOGI("gl", "restored rtc=%d flash=%d default=%d str='%s' arr=%u/%u (values before this boot's bump: one less)",
|
||||
id(cnt_rtc) - 1, id(cnt_flash) - 1, id(cnt_default) - 1, id(str_rtc).c_str(), id(arr_rtc)[0] - 1, id(arr_rtc)[1] - 2);
|
||||
id(str_rtc) = buf;
|
||||
- delay: 2s
|
||||
- lambda: |-
|
||||
global_preferences->sync();
|
||||
ESP_LOGI("gl", "saved rtc=%d flash=%d default=%d str='%s' arr=%u/%u", id(cnt_rtc), id(cnt_flash), id(cnt_default),
|
||||
id(str_rtc).c_str(), id(arr_rtc)[0], id(arr_rtc)[1]);
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(cnt_rtc) % 2 == 1;'
|
||||
then:
|
||||
- delay: 3s
|
||||
- lambda: 'ESP_LOGI("gl", "odd boot, soft restart now"); App.safe_reboot();'
|
||||
|
||||
button:
|
||||
- platform: restart
|
||||
name: Restart
|
||||
@@ -1,159 +0,0 @@
|
||||
# shared part: two Home Assistant lights mirrored on the device plus buttons that drive them
|
||||
esphome:
|
||||
# A local change made before the light core's first write (b19a776 sends it instead of merging it).
|
||||
on_boot:
|
||||
priority: -100
|
||||
then:
|
||||
- lambda: 'ESP_LOGI("halight", "on_boot turning B on at 35 percent before the first write");'
|
||||
- light.turn_on:
|
||||
id: bulb_b
|
||||
brightness: 35%
|
||||
logger:
|
||||
level: VERBOSE
|
||||
logs:
|
||||
api: DEBUG
|
||||
api.connection: DEBUG
|
||||
api.service: DEBUG
|
||||
wifi: DEBUG
|
||||
scheduler: DEBUG
|
||||
component: DEBUG
|
||||
sensor: DEBUG
|
||||
mdns: DEBUG
|
||||
ota: DEBUG
|
||||
socket: DEBUG
|
||||
esp-idf: DEBUG
|
||||
preferences: DEBUG
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
reboot_timeout: 0s
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
light:
|
||||
- platform: homeassistant
|
||||
id: bulb_a
|
||||
name: Mirror A
|
||||
entity_id: light.ENTITY_A
|
||||
report_timeout: 5s
|
||||
on_turn_on:
|
||||
- logger.log: "bulb_a on_turn_on"
|
||||
on_turn_off:
|
||||
- logger.log: "bulb_a on_turn_off"
|
||||
- platform: homeassistant
|
||||
id: bulb_b
|
||||
name: Mirror B
|
||||
entity_id: light.ENTITY_B
|
||||
report_timeout: 5s
|
||||
|
||||
button:
|
||||
- platform: template
|
||||
name: A warm 40
|
||||
id: a_warm_40
|
||||
on_press:
|
||||
- light.turn_on:
|
||||
id: bulb_a
|
||||
brightness: 40%
|
||||
color_temperature: 370 mireds
|
||||
- platform: template
|
||||
name: A cool 100
|
||||
on_press:
|
||||
- light.turn_on:
|
||||
id: bulb_a
|
||||
brightness: 100%
|
||||
color_temperature: 153 mireds
|
||||
- platform: template
|
||||
name: A red
|
||||
on_press:
|
||||
- light.turn_on:
|
||||
id: bulb_a
|
||||
brightness: 80%
|
||||
red: 100%
|
||||
green: 0%
|
||||
blue: 0%
|
||||
- platform: template
|
||||
name: A green dim
|
||||
on_press:
|
||||
- light.turn_on:
|
||||
id: bulb_a
|
||||
brightness: 20%
|
||||
red: 0%
|
||||
green: 100%
|
||||
blue: 0%
|
||||
- platform: template
|
||||
name: A brightness only 60
|
||||
on_press:
|
||||
- light.turn_on:
|
||||
id: bulb_a
|
||||
brightness: 60%
|
||||
- platform: template
|
||||
name: A transition 100
|
||||
on_press:
|
||||
- light.turn_on:
|
||||
id: bulb_a
|
||||
brightness: 100%
|
||||
transition_length: 3s
|
||||
- platform: template
|
||||
name: A flash
|
||||
on_press:
|
||||
- light.turn_on:
|
||||
id: bulb_a
|
||||
flash_length: 1s
|
||||
- platform: template
|
||||
name: A off
|
||||
on_press:
|
||||
- light.turn_off: bulb_a
|
||||
- platform: template
|
||||
name: A toggle
|
||||
on_press:
|
||||
- light.toggle: bulb_a
|
||||
- platform: template
|
||||
name: B warm 50
|
||||
on_press:
|
||||
- light.turn_on:
|
||||
id: bulb_b
|
||||
brightness: 50%
|
||||
color_temperature: 300 mireds
|
||||
- platform: template
|
||||
name: B off
|
||||
on_press:
|
||||
- light.turn_off: bulb_b
|
||||
- platform: template
|
||||
name: A 50 fade 3s
|
||||
on_press:
|
||||
- light.turn_on:
|
||||
id: bulb_a
|
||||
brightness: 50%
|
||||
transition_length: 3s
|
||||
- platform: template
|
||||
name: A many calls
|
||||
on_press:
|
||||
- lambda: |-
|
||||
for (int i = 0; i < 16; i++) {
|
||||
id(bulb_a).make_call().set_brightness(i == 15 ? 1.0f : 0.6f).set_transition_length(1000).perform();
|
||||
}
|
||||
- platform: template
|
||||
name: Log state
|
||||
on_press:
|
||||
- lambda: |-
|
||||
auto v = id(bulb_a).current_values;
|
||||
ESP_LOGI("halight", "A: on=%d mode=%d bri=%.2f ct=%.1f rgb=%.2f/%.2f/%.2f B: on=%d bri=%.2f",
|
||||
v.is_on(), (int) v.get_color_mode(), v.get_brightness(), v.get_color_temperature(),
|
||||
v.get_red(), v.get_green(), v.get_blue(), id(bulb_b).current_values.is_on(),
|
||||
id(bulb_b).current_values.get_brightness());
|
||||
|
||||
interval:
|
||||
- interval: 30s
|
||||
then:
|
||||
- lambda: |-
|
||||
auto v = id(bulb_a).current_values;
|
||||
ESP_LOGI("halight", "alive A: on=%d mode=%d bri=%.2f ct=%.1f rgb=%.2f/%.2f/%.2f B: on=%d bri=%.2f",
|
||||
v.is_on(), (int) v.get_color_mode(), v.get_brightness(), v.get_color_temperature(),
|
||||
v.get_red(), v.get_green(), v.get_blue(), id(bulb_b).current_values.is_on(),
|
||||
id(bulb_b).current_values.get_brightness());
|
||||
@@ -1,99 +0,0 @@
|
||||
# MQTT TLS trust-source test (#14318, needs that PR's tree for tls and verify_ssl): one build per trust source, with
|
||||
# the name and the mqtt block edited per file (see reference/recipes/mqtt.md). Secrets: broker_ip (the local broker
|
||||
# from make_test_ca.sh), mqtt_ca, mqtt_client_cert and mqtt_client_key as block scalars from the same run.
|
||||
esp32:
|
||||
board: esp32dev
|
||||
framework:
|
||||
type: esp-idf
|
||||
|
||||
logger:
|
||||
level: VERBOSE
|
||||
logs:
|
||||
wifi: DEBUG
|
||||
api: DEBUG
|
||||
api.connection: DEBUG
|
||||
scheduler: DEBUG
|
||||
component: DEBUG
|
||||
sensor: DEBUG
|
||||
esp32: DEBUG
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
power_save_mode: none
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
reboot_timeout: 0s
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
interval:
|
||||
- interval: 10s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGI("probe", "mqtt connected %d, internal free %u, largest block %u", id(mq).is_connected(),
|
||||
(unsigned) heap_caps_get_free_size(MALLOC_CAP_INTERNAL),
|
||||
(unsigned) heap_caps_get_largest_free_block(MALLOC_CAP_INTERNAL));
|
||||
|
||||
sensor:
|
||||
- platform: template
|
||||
name: Counter
|
||||
update_interval: 2s
|
||||
accuracy_decimals: 0
|
||||
lambda: |-
|
||||
static uint32_t n = 0;
|
||||
return n++;
|
||||
|
||||
switch:
|
||||
- platform: template
|
||||
name: Relay
|
||||
id: relay
|
||||
optimistic: true
|
||||
on_turn_on:
|
||||
- logger.log: "Relay ON"
|
||||
on_turn_off:
|
||||
- logger.log: "Relay OFF"
|
||||
|
||||
button:
|
||||
- platform: template
|
||||
name: Publish big
|
||||
on_press:
|
||||
- mqtt.publish:
|
||||
topic: ${name}/big
|
||||
payload: !lambda |-
|
||||
return std::string(3000, 'q');
|
||||
|
||||
substitutions:
|
||||
name: mqtt-dut
|
||||
|
||||
esphome:
|
||||
name: ${name}
|
||||
|
||||
mqtt:
|
||||
id: mq
|
||||
broker: !secret broker_ip # test.mosquitto.org for the bundle run
|
||||
# No port: it must resolve to 1883 without TLS options and to 8883 with them. Spell it out only for the
|
||||
# client-certificate listener (8884), wss (9002) and the public bundle broker (8886).
|
||||
# The next two lines are the own-CA build. Remove both for the broker-only build (skip_cert_cn_check alone turns
|
||||
# TLS on), replace both with verify_ssl: false for the unverified build (the flag is rejected next to it), or with
|
||||
# tls: true for the bundle builds (public broker, and the local one as the negative).
|
||||
skip_cert_cn_check: true # with the local CA: the certificate names an address
|
||||
certificate_authority: !secret mqtt_ca
|
||||
# client_certificate: !secret mqtt_client_cert # with the CA, port 8884
|
||||
# client_certificate_key: !secret mqtt_client_key
|
||||
# transport: wss # with the CA, port 9002
|
||||
reboot_timeout: 0s
|
||||
discovery: false
|
||||
on_message:
|
||||
- topic: ${name}/cmd
|
||||
then:
|
||||
- logger.log:
|
||||
format: "cmd payload: %s"
|
||||
args: ["x.c_str()"]
|
||||
on_connect:
|
||||
- logger.log: "MQTT on_connect"
|
||||
on_disconnect:
|
||||
- logger.log: "MQTT on_disconnect"
|
||||
@@ -1,88 +0,0 @@
|
||||
# MQTT transport test (#16056, needs that PR's tree for the transport option): one build per transport, name and mqtt block per file (see reference/recipes/mqtt.md).
|
||||
esp32:
|
||||
board: esp32dev
|
||||
framework:
|
||||
type: esp-idf
|
||||
|
||||
logger:
|
||||
level: VERBOSE
|
||||
logs:
|
||||
wifi: DEBUG
|
||||
api: DEBUG
|
||||
api.connection: DEBUG
|
||||
scheduler: DEBUG
|
||||
component: DEBUG
|
||||
sensor: DEBUG
|
||||
esp32: DEBUG
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
power_save_mode: none
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
reboot_timeout: 0s
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
interval:
|
||||
- interval: 10s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGI("probe", "mqtt connected %d, internal free %u, largest block %u", id(mq).is_connected(),
|
||||
(unsigned) heap_caps_get_free_size(MALLOC_CAP_INTERNAL),
|
||||
(unsigned) heap_caps_get_largest_free_block(MALLOC_CAP_INTERNAL));
|
||||
|
||||
sensor:
|
||||
- platform: template
|
||||
name: Counter
|
||||
update_interval: 2s
|
||||
accuracy_decimals: 0
|
||||
lambda: |-
|
||||
static uint32_t n = 0;
|
||||
return n++;
|
||||
|
||||
switch:
|
||||
- platform: template
|
||||
name: Relay
|
||||
id: relay
|
||||
optimistic: true
|
||||
on_turn_on:
|
||||
- logger.log: "Relay ON"
|
||||
on_turn_off:
|
||||
- logger.log: "Relay OFF"
|
||||
|
||||
button:
|
||||
- platform: template
|
||||
name: Publish big
|
||||
on_press:
|
||||
- mqtt.publish:
|
||||
topic: ${name}/big
|
||||
payload: !lambda |-
|
||||
return std::string(3000, 'q');
|
||||
|
||||
substitutions:
|
||||
name: mqtt-dut
|
||||
|
||||
esphome:
|
||||
name: ${name}
|
||||
|
||||
mqtt:
|
||||
id: mq
|
||||
broker: !secret broker_ip # test.mosquitto.org for the public bundle run
|
||||
port: 9002 # 1883 tcp, 9001 ws, 9002 wss, 8081 public wss
|
||||
transport: wss # drop for tcp
|
||||
ws_path: /mqtt # ws and wss only
|
||||
certificate_authority: !secret mqtt_ca # drop for the bundle runs
|
||||
skip_cert_cn_check: true # with the local CA only: the certificate names an address
|
||||
reboot_timeout: 0s
|
||||
discovery: false
|
||||
on_message:
|
||||
- topic: ${name}/cmd
|
||||
then:
|
||||
- logger.log:
|
||||
format: "cmd payload: %s"
|
||||
args: ["x.c_str()"]
|
||||
@@ -1,55 +0,0 @@
|
||||
# Mains build (no deep sleep): outgoing API connection timing after a Wi-Fi drop, and the loop cost while a
|
||||
# connect is pending or the network is down.
|
||||
esphome:
|
||||
name: wifi-drop-dut
|
||||
|
||||
esp32:
|
||||
board: esp32dev
|
||||
framework:
|
||||
type: esp-idf
|
||||
|
||||
logger:
|
||||
level: DEBUG
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
fast_connect: true
|
||||
on_connect:
|
||||
- lambda: ESP_LOGI("timing", "wifi connected at %u ms", (unsigned) millis());
|
||||
on_disconnect:
|
||||
- lambda: ESP_LOGI("timing", "wifi disconnected at %u ms", (unsigned) millis());
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
reboot_timeout: 0s
|
||||
outgoing_connection:
|
||||
delay: 2s
|
||||
on_client_connected:
|
||||
- lambda: ESP_LOGI("timing", "client connected at %u ms (%s %s)", (unsigned) millis(), client_info.c_str(), client_address.c_str());
|
||||
on_client_disconnected:
|
||||
- lambda: ESP_LOGI("timing", "client disconnected at %u ms (%s)", (unsigned) millis(), client_info.c_str());
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
debug:
|
||||
update_interval: 5s
|
||||
|
||||
sensor:
|
||||
- platform: debug
|
||||
loop_time:
|
||||
name: Loop Time
|
||||
on_value:
|
||||
- lambda: ESP_LOGI("timing", "loop time max %.0f ms over the last 5 s at %u ms", x, (unsigned) millis());
|
||||
|
||||
button:
|
||||
- platform: template
|
||||
name: Wifi cycle
|
||||
on_press:
|
||||
- lambda: ESP_LOGI("timing", "wifi cycle disabling at %u ms", (unsigned) millis());
|
||||
- wifi.disable:
|
||||
- delay: 4s
|
||||
- lambda: ESP_LOGI("timing", "wifi cycle enabling at %u ms", (unsigned) millis());
|
||||
- wifi.enable:
|
||||
@@ -1,93 +0,0 @@
|
||||
# udp.write payload shapes (#21263): every shape the action takes behind a template button, plus an on_receive that
|
||||
# replies with the received bytes reversed through a lambda. Per run file: substitutions name and listener_ip (the test
|
||||
# host that runs scripts/udp/udp_listen.py), then packages: common: !include this file. Drive it with
|
||||
# scripts/udp/write_cases.sh DEVICE_IP KEY, which presses the buttons, sends the echo datagram and checks every payload.
|
||||
esp8266:
|
||||
board: d1_mini
|
||||
|
||||
logger:
|
||||
level: VERBOSE
|
||||
logs:
|
||||
wifi: DEBUG
|
||||
api: DEBUG
|
||||
api.connection: DEBUG
|
||||
scheduler: DEBUG
|
||||
component: DEBUG
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
power_save_mode: none
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
reboot_timeout: 0s
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
interval:
|
||||
- interval: 10s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGI("probe", "free heap %u, max block %u", (unsigned) ESP.getFreeHeap(), (unsigned) ESP.getMaxFreeBlockSize());
|
||||
|
||||
esphome:
|
||||
name: ${name}
|
||||
|
||||
udp:
|
||||
id: u
|
||||
addresses:
|
||||
- ${listener_ip}
|
||||
on_receive:
|
||||
- lambda: ESP_LOGI("echo", "received %u bytes", (unsigned) data.size());
|
||||
- udp.write: !lambda |-
|
||||
std::vector<uint8_t> v(data.rbegin(), data.rend());
|
||||
return v;
|
||||
|
||||
button:
|
||||
- platform: template
|
||||
name: Small
|
||||
on_press:
|
||||
- logger.log: "case small"
|
||||
- udp.write: [0xAA, 0x55, 0x01, 0x02]
|
||||
- udp.write: [0xAA, 0x55, 0x01, 0x02]
|
||||
- platform: template
|
||||
name: Simple
|
||||
on_press:
|
||||
- logger.log: "case simple"
|
||||
- udp.write: [1, 2, 3]
|
||||
- platform: template
|
||||
name: Text
|
||||
on_press:
|
||||
- logger.log: "case text"
|
||||
- udp.write: "hello udp"
|
||||
- platform: template
|
||||
name: Empty
|
||||
on_press:
|
||||
- logger.log: "case empty"
|
||||
- udp.write: []
|
||||
- platform: template
|
||||
name: Stack128
|
||||
on_press:
|
||||
- logger.log: "case stack128"
|
||||
- udp.write: [0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E, 0x2F, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x3B, 0x3C, 0x3D, 0x3E, 0x3F, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5A, 0x5B, 0x5C, 0x5D, 0x5E, 0x5F, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7A, 0x7B, 0x7C, 0x7D, 0x7E, 0x7F, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F]
|
||||
- platform: template
|
||||
name: Heap129
|
||||
on_press:
|
||||
- logger.log: "case heap129"
|
||||
- udp.write: [0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E, 0x2F, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x3B, 0x3C, 0x3D, 0x3E, 0x3F, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5A, 0x5B, 0x5C, 0x5D, 0x5E, 0x5F, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7A, 0x7B, 0x7C, 0x7D, 0x7E, 0x7F, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, 0x9A, 0x9B, 0x9C, 0x9D, 0x9E, 0x9F, 0xA0]
|
||||
- platform: template
|
||||
name: Heap600
|
||||
on_press:
|
||||
- logger.log: "case heap600"
|
||||
- udp.write: [0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x3B, 0x3C, 0x3D, 0x3E, 0x3F, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5A, 0x5B, 0x5C, 0x5D, 0x5E, 0x5F, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7A, 0x7B, 0x7C, 0x7D, 0x7E, 0x7F, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, 0x9A, 0x9B, 0x9C, 0x9D, 0x9E, 0x9F, 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9, 0xBA, 0xBB, 0xBC, 0xBD, 0xBE, 0xBF, 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9, 0xDA, 0xDB, 0xDC, 0xDD, 0xDE, 0xDF, 0xE0, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, 0xE8, 0xE9, 0xEA, 0xEB, 0xEC, 0xED, 0xEE, 0xEF, 0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8, 0xF9, 0xFA, 0xFB, 0xFC, 0xFD, 0xFE, 0xFF, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E, 0x2F, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x3B, 0x3C, 0x3D, 0x3E, 0x3F, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5A, 0x5B, 0x5C, 0x5D, 0x5E, 0x5F, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7A, 0x7B, 0x7C, 0x7D, 0x7E, 0x7F, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, 0x9A, 0x9B, 0x9C, 0x9D, 0x9E, 0x9F, 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9, 0xBA, 0xBB, 0xBC, 0xBD, 0xBE, 0xBF, 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9, 0xDA, 0xDB, 0xDC, 0xDD, 0xDE, 0xDF, 0xE0, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, 0xE8, 0xE9, 0xEA, 0xEB, 0xEC, 0xED, 0xEE, 0xEF, 0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8, 0xF9, 0xFA, 0xFB, 0xFC, 0xFD, 0xFE, 0xFF, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E, 0x2F, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x3B, 0x3C, 0x3D, 0x3E, 0x3F, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5A, 0x5B, 0x5C, 0x5D, 0x5E, 0x5F, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7A, 0x7B, 0x7C, 0x7D, 0x7E, 0x7F, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87]
|
||||
- platform: template
|
||||
name: Lambda300
|
||||
on_press:
|
||||
- logger.log: "case lambda300"
|
||||
- udp.write: !lambda |-
|
||||
std::vector<uint8_t> v(300);
|
||||
for (size_t i = 0; i < v.size(); i++) v[i] = (uint8_t) (i * 7);
|
||||
return v;
|
||||
@@ -1,76 +0,0 @@
|
||||
# Music Assistant target: the plain USB audio template plus the CAST-1 style sendspin wiring (resampler speakers
|
||||
# into a mixer whose inputs never time out, speaker_source media player, sendspin hub and sources).
|
||||
packages:
|
||||
base: !include usb-audio-waveshare-s3-eth-dut.yaml
|
||||
|
||||
# Logs over the API only: a DEBUG line per report would saturate UART0 and trip the task watchdog.
|
||||
logger:
|
||||
baud_rate: 0
|
||||
|
||||
speaker:
|
||||
- id: !extend usb_speaker
|
||||
buffer_size: 28800
|
||||
write_timeout: 50ms
|
||||
- platform: mixer
|
||||
id: mixer_speaker_id
|
||||
output_speaker: usb_speaker
|
||||
num_channels: 2
|
||||
task_stack_in_psram: true
|
||||
source_speakers:
|
||||
- id: announcement_mixer_input
|
||||
timeout: never
|
||||
- id: media_mixer_input
|
||||
timeout: never
|
||||
- platform: resampler
|
||||
id: announcement_resampling_speaker
|
||||
output_speaker: announcement_mixer_input
|
||||
sample_rate: 48000
|
||||
bits_per_sample: 16
|
||||
- platform: resampler
|
||||
id: media_resampling_speaker
|
||||
output_speaker: media_mixer_input
|
||||
sample_rate: 48000
|
||||
bits_per_sample: 16
|
||||
|
||||
sendspin:
|
||||
id: sendspin_hub
|
||||
# PSRAM stack skews time sync; keep internal
|
||||
task_stack_in_psram: false
|
||||
manufacturer: Waveshare
|
||||
model: ESP32-S3-ETH USB audio
|
||||
firmware_version: "0.1"
|
||||
unpaired_access: true
|
||||
|
||||
media_source:
|
||||
- platform: sendspin
|
||||
id: sendspin_source
|
||||
- platform: audio_http
|
||||
id: http_media_source
|
||||
buffer_size: 500000
|
||||
- platform: audio_http
|
||||
id: http_announcement_source
|
||||
buffer_size: 250000
|
||||
|
||||
media_player:
|
||||
- platform: sendspin
|
||||
id: sendspin_group_media_player
|
||||
name: Sendspin Player
|
||||
- platform: speaker_source
|
||||
id: external_media_player
|
||||
name: Player
|
||||
volume_increment: 0.05
|
||||
announcement_pipeline:
|
||||
format: FLAC
|
||||
num_channels: 1
|
||||
sample_rate: 48000
|
||||
speaker: announcement_resampling_speaker
|
||||
sources:
|
||||
- http_announcement_source
|
||||
media_pipeline:
|
||||
speaker: media_resampling_speaker
|
||||
format: FLAC
|
||||
num_channels: 2
|
||||
sample_rate: 48000
|
||||
sources:
|
||||
- sendspin_source
|
||||
- http_media_source
|
||||
@@ -1,142 +0,0 @@
|
||||
# Waveshare ESP32-S3-ETH: USB host for a speakerphone (usb_audio), logs over Ethernet, the USB port is the host port
|
||||
esphome:
|
||||
name: usb-audio-dut
|
||||
|
||||
esp32:
|
||||
board: esp32-s3-devkitc-1
|
||||
variant: esp32s3
|
||||
flash_size: 16MB
|
||||
framework:
|
||||
type: esp-idf
|
||||
|
||||
psram:
|
||||
mode: octal
|
||||
speed: 80MHz
|
||||
|
||||
logger:
|
||||
level: DEBUG
|
||||
hardware_uart: UART0
|
||||
logs:
|
||||
usb_host: DEBUG
|
||||
|
||||
ethernet:
|
||||
type: W5500
|
||||
clk_pin: GPIO13
|
||||
mosi_pin: GPIO11
|
||||
miso_pin: GPIO12
|
||||
cs_pin: GPIO14
|
||||
interrupt_pin: GPIO10
|
||||
reset_pin: GPIO9
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
reboot_timeout: 0s
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
usb_audio:
|
||||
id: usb_audio_id
|
||||
|
||||
microphone:
|
||||
- platform: usb_audio
|
||||
id: usb_mic
|
||||
usb_audio_id: usb_audio_id
|
||||
sample_rate: 48000
|
||||
bits_per_sample: 16bit
|
||||
num_channels: 2
|
||||
buffer_size: 9600
|
||||
on_data:
|
||||
- lambda: |-
|
||||
id(mic_bytes) += x.size();
|
||||
id(mic_chunks) += 1;
|
||||
|
||||
speaker:
|
||||
- platform: usb_audio
|
||||
id: usb_speaker
|
||||
usb_audio_id: usb_audio_id
|
||||
sample_rate: 48000
|
||||
bits_per_sample: 24bit
|
||||
num_channels: 2
|
||||
buffer_size: 9600
|
||||
write_timeout: 20ms
|
||||
|
||||
globals:
|
||||
- id: beep_left
|
||||
type: int
|
||||
initial_value: "0"
|
||||
- id: beep_written
|
||||
type: uint32_t
|
||||
initial_value: "0"
|
||||
- id: beep_short
|
||||
type: uint32_t
|
||||
initial_value: "0"
|
||||
- id: beep_phase
|
||||
type: float
|
||||
initial_value: "0"
|
||||
- id: mic_bytes
|
||||
type: uint32_t
|
||||
initial_value: "0"
|
||||
- id: mic_chunks
|
||||
type: uint32_t
|
||||
initial_value: "0"
|
||||
|
||||
button:
|
||||
- platform: template
|
||||
name: Mic start
|
||||
on_press:
|
||||
- microphone.capture: usb_mic
|
||||
- platform: template
|
||||
name: Mic stop
|
||||
on_press:
|
||||
- microphone.stop_capture: usb_mic
|
||||
- platform: template
|
||||
name: Beep
|
||||
on_press:
|
||||
- lambda: |-
|
||||
// 2 s of a 1 kHz tone at 48 kHz 24-bit stereo, fed 10 ms at a time from the interval below
|
||||
id(beep_left) = 200;
|
||||
id(beep_written) = 0;
|
||||
id(beep_short) = 0;
|
||||
id(beep_phase) = 0.0f;
|
||||
id(usb_speaker).start();
|
||||
ESP_LOGI("uatest", "beep started");
|
||||
- platform: template
|
||||
name: Speaker stop
|
||||
on_press:
|
||||
- speaker.stop: usb_speaker
|
||||
- platform: template
|
||||
name: Restart
|
||||
on_press:
|
||||
- lambda: App.safe_reboot();
|
||||
|
||||
interval:
|
||||
- interval: 8ms
|
||||
then:
|
||||
- lambda: |-
|
||||
if (id(beep_left) <= 0) return;
|
||||
// 10 ms of 48 kHz stereo 24-bit samples, 3 bytes little-endian per sample
|
||||
static uint8_t buf[480 * 2 * 3];
|
||||
float phase = id(beep_phase);
|
||||
for (int i = 0; i < 480; i++) {
|
||||
int32_t s = (int32_t) (1500000.0f * sinf(phase));
|
||||
phase += 2.0f * 3.14159265f * 1000.0f / 48000.0f;
|
||||
if (phase > 6.2831853f) phase -= 6.2831853f;
|
||||
for (int c = 0; c < 2; c++) {
|
||||
uint8_t *o = buf + (i * 2 + c) * 3;
|
||||
o[0] = s & 0xFF; o[1] = (s >> 8) & 0xFF; o[2] = (s >> 16) & 0xFF;
|
||||
}
|
||||
}
|
||||
size_t n = id(usb_speaker).play(buf, sizeof(buf), 0);
|
||||
if (n == 0) { id(beep_short) += 1; return; } // not accepted yet, try the same chunk next time
|
||||
id(beep_phase) = phase;
|
||||
id(beep_written) += n;
|
||||
id(beep_left) -= 1;
|
||||
if (id(beep_left) == 0) ESP_LOGI("uatest", "beep done: %u bytes queued, %u retries", (unsigned) id(beep_written), (unsigned) id(beep_short));
|
||||
- interval: 5s
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGI("uatest", "mic capturing=%d bytes=%u chunks=%u | speaker running=%d | heap free %u",
|
||||
id(usb_mic).is_running(), (unsigned) id(mic_bytes), (unsigned) id(mic_chunks),
|
||||
id(usb_speaker).is_running(), (unsigned) heap_caps_get_free_size(MALLOC_CAP_INTERNAL));
|
||||
@@ -1,136 +0,0 @@
|
||||
# web_server_idf state SSE and HTTPD task stress (#21109, #21038). Add `auth:` with `type: digest` for the HTTPD
|
||||
# stack case; the entity endpoints are named after the entities (/sensor/Fast%201, /switch/Toggle/toggle).
|
||||
esphome:
|
||||
name: web-server-dut
|
||||
|
||||
esp32:
|
||||
board: esp32dev
|
||||
framework:
|
||||
type: esp-idf
|
||||
|
||||
logger:
|
||||
level: DEBUG
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
power_save_mode: none
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
reboot_timeout: 0s
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
web_server:
|
||||
port: 80
|
||||
version: 3
|
||||
|
||||
# Stack and heap probe from the main loop task (loopTask) and the HTTPD task.
|
||||
interval:
|
||||
- interval: 5s
|
||||
then:
|
||||
- lambda: |-
|
||||
TaskHandle_t httpd = xTaskGetHandle("httpd");
|
||||
if (httpd == nullptr) {
|
||||
ESP_LOGW("probe", "httpd task not found, loopTask min free stack %u",
|
||||
(unsigned) uxTaskGetStackHighWaterMark(nullptr));
|
||||
return;
|
||||
}
|
||||
ESP_LOGI("probe", "loopTask min free stack %u, httpd min free stack %u, internal free %u, largest block %u",
|
||||
(unsigned) uxTaskGetStackHighWaterMark(nullptr), (unsigned) uxTaskGetStackHighWaterMark(httpd),
|
||||
(unsigned) heap_caps_get_free_size(MALLOC_CAP_INTERNAL),
|
||||
(unsigned) heap_caps_get_largest_free_block(MALLOC_CAP_INTERNAL));
|
||||
|
||||
# Small state events: eight sensors at 200 ms, well under the 1024 byte stack buffer.
|
||||
sensor:
|
||||
- platform: template
|
||||
name: Fast 1
|
||||
id: fast1
|
||||
update_interval: 200ms
|
||||
accuracy_decimals: 3
|
||||
lambda: return random_float() * 100.0f;
|
||||
- platform: template
|
||||
name: Fast 2
|
||||
update_interval: 200ms
|
||||
accuracy_decimals: 3
|
||||
lambda: return random_float() * 100.0f;
|
||||
- platform: template
|
||||
name: Fast 3
|
||||
update_interval: 200ms
|
||||
accuracy_decimals: 3
|
||||
lambda: return random_float() * 100.0f;
|
||||
- platform: template
|
||||
name: Fast 4
|
||||
update_interval: 200ms
|
||||
accuracy_decimals: 3
|
||||
lambda: return random_float() * 100.0f;
|
||||
- platform: template
|
||||
name: Fast 5
|
||||
update_interval: 200ms
|
||||
accuracy_decimals: 3
|
||||
lambda: return random_float() * 100.0f;
|
||||
- platform: template
|
||||
name: Fast 6
|
||||
update_interval: 200ms
|
||||
accuracy_decimals: 3
|
||||
lambda: return random_float() * 100.0f;
|
||||
- platform: template
|
||||
name: Fast 7
|
||||
update_interval: 200ms
|
||||
accuracy_decimals: 3
|
||||
lambda: return random_float() * 100.0f;
|
||||
- platform: template
|
||||
name: Fast 8
|
||||
update_interval: 200ms
|
||||
accuracy_decimals: 3
|
||||
lambda: return random_float() * 100.0f;
|
||||
|
||||
# Large state events: the text sensor JSON carries the string twice (value and state).
|
||||
# mid ~1.3 kB goes to the 2048 byte tail, big ~3.7 kB grows the tail to 4096, huge ~5.7 kB exceeds the
|
||||
# 5120 byte JSON room and must be dropped with "State event does not fit".
|
||||
text_sensor:
|
||||
- platform: template
|
||||
name: Mid
|
||||
id: mid
|
||||
update_interval: 1s
|
||||
lambda: |-
|
||||
static uint32_t n = 0;
|
||||
std::string s = std::to_string(n++) + ":";
|
||||
s.append(600 - s.size(), 'm');
|
||||
return s;
|
||||
- platform: template
|
||||
name: Big
|
||||
id: big
|
||||
update_interval: 2s
|
||||
lambda: |-
|
||||
static uint32_t n = 0;
|
||||
std::string s = std::to_string(n++) + ":";
|
||||
s.append(1800 - s.size(), 'b');
|
||||
return s;
|
||||
- platform: template
|
||||
name: Huge
|
||||
id: huge
|
||||
update_interval: 7s
|
||||
lambda: |-
|
||||
static uint32_t n = 0;
|
||||
std::string s = std::to_string(n++) + ":";
|
||||
s.append(2800 - s.size(), 'h');
|
||||
return s;
|
||||
|
||||
switch:
|
||||
- platform: template
|
||||
name: Toggle
|
||||
optimistic: true
|
||||
|
||||
button:
|
||||
- platform: template
|
||||
name: Burst
|
||||
on_press:
|
||||
- lambda: |-
|
||||
for (int i = 0; i < 50; i++) {
|
||||
id(fast1).publish_state(i);
|
||||
id(mid).publish_state(std::string(600, 'x'));
|
||||
}
|
||||
@@ -12,7 +12,6 @@ Checks: >-
|
||||
-bugprone-multi-level-implicit-pointer-conversion,
|
||||
-bugprone-narrowing-conversions,
|
||||
-bugprone-tagged-union-member-count,
|
||||
-bugprone-signed-bitwise,
|
||||
-bugprone-signed-char-misuse,
|
||||
-bugprone-switch-missing-default-case,
|
||||
-cert-dcl50-cpp,
|
||||
@@ -40,7 +39,6 @@ Checks: >-
|
||||
-cppcoreguidelines-avoid-const-or-ref-data-members,
|
||||
-cppcoreguidelines-avoid-do-while,
|
||||
-cppcoreguidelines-avoid-magic-numbers,
|
||||
-cppcoreguidelines-explicit-constructor,
|
||||
-cppcoreguidelines-init-variables,
|
||||
-cppcoreguidelines-macro-to-enum,
|
||||
-cppcoreguidelines-macro-usage,
|
||||
@@ -86,7 +84,6 @@ Checks: >-
|
||||
-llvm-use-ranges,
|
||||
-llvmlibc-*,
|
||||
-misc-const-correctness,
|
||||
-misc-explicit-constructor,
|
||||
-misc-include-cleaner,
|
||||
-misc-multiple-inheritance,
|
||||
-misc-no-recursion,
|
||||
@@ -116,7 +113,6 @@ Checks: >-
|
||||
-objc-*,
|
||||
-performance-enum-size,
|
||||
-portability-avoid-pragma-once,
|
||||
-portability-no-assembler,
|
||||
-portability-template-virtual-member-function,
|
||||
-readability-ambiguous-smartptr-reset-call,
|
||||
-readability-avoid-nested-conditional-operator,
|
||||
@@ -133,13 +129,9 @@ Checks: >-
|
||||
-readability-named-parameter,
|
||||
-readability-redundant-casting,
|
||||
-readability-redundant-inline-specifier,
|
||||
-readability-redundant-lambda-parameter-list,
|
||||
-readability-redundant-member-init,
|
||||
-readability-redundant-nested-if,
|
||||
-readability-redundant-parentheses,
|
||||
-readability-redundant-typename,
|
||||
-readability-trailing-comma,
|
||||
-readability-trivial-switch,
|
||||
-readability-uppercase-literal-suffix,
|
||||
-readability-use-anyofallof,
|
||||
-readability-use-std-min-max,
|
||||
|
||||
@@ -2,6 +2,4 @@
|
||||
omit =
|
||||
esphome/components/*
|
||||
esphome/analyze_memory/*
|
||||
esphome/espidf/get_idf_tool_paths.py
|
||||
esphome/espidf/get_idf_version.py
|
||||
tests/integration/*
|
||||
|
||||
@@ -28,6 +28,7 @@
|
||||
// python
|
||||
"ms-python.python",
|
||||
"ms-python.pylint",
|
||||
"ms-python.flake8",
|
||||
"charliermarsh.ruff",
|
||||
"visualstudioexptteam.vscodeintellicode",
|
||||
// yaml
|
||||
@@ -47,6 +48,9 @@
|
||||
"pylint.args": [
|
||||
"--rcfile=${workspaceFolder}/pyproject.toml"
|
||||
],
|
||||
"flake8.args": [
|
||||
"--config=${workspaceFolder}/.flake8"
|
||||
],
|
||||
"ruff.configuration": "${workspaceFolder}/pyproject.toml",
|
||||
"[python]": {
|
||||
// VS will say "Value is not accepted" before building the devcontainer, but the warning
|
||||
|
||||
@@ -0,0 +1,42 @@
|
||||
[flake8]
|
||||
max-line-length = 120
|
||||
# Following 4 for black compatibility
|
||||
# E501: line too long
|
||||
# W503: Line break occurred before a binary operator
|
||||
# E203: Whitespace before ':'
|
||||
# D202 No blank lines allowed after function docstring
|
||||
|
||||
# TODO fix flake8
|
||||
# D100 Missing docstring in public module
|
||||
# D101 Missing docstring in public class
|
||||
# D102 Missing docstring in public method
|
||||
# D103 Missing docstring in public function
|
||||
# D104 Missing docstring in public package
|
||||
# D105 Missing docstring in magic method
|
||||
# D107 Missing docstring in __init__
|
||||
# D200 One-line docstring should fit on one line with quotes
|
||||
# D205 1 blank line required between summary line and description
|
||||
# D209 Multi-line docstring closing quotes should be on a separate line
|
||||
# D400 First line should end with a period
|
||||
# D401 First line should be in imperative mood
|
||||
|
||||
ignore =
|
||||
E501,
|
||||
W503,
|
||||
E203,
|
||||
D202,
|
||||
|
||||
D100,
|
||||
D101,
|
||||
D102,
|
||||
D103,
|
||||
D104,
|
||||
D105,
|
||||
D107,
|
||||
D200,
|
||||
D205,
|
||||
D209,
|
||||
D400,
|
||||
D401,
|
||||
|
||||
exclude = api_pb2.py
|
||||
@@ -21,7 +21,6 @@ module.exports = {
|
||||
'github-actions',
|
||||
'by-code-owner',
|
||||
'has-tests',
|
||||
'api.proto',
|
||||
'needs-tests',
|
||||
'needs-docs',
|
||||
'needs-developer-docs',
|
||||
|
||||
@@ -272,18 +272,6 @@ async function detectTests(changedFiles) {
|
||||
return labels;
|
||||
}
|
||||
|
||||
// Strategy: API protocol change detection
|
||||
// aioesphomeapi carries copies of both files, so every change here needs a sync there
|
||||
const API_PROTO_FILES = ['esphome/components/api/api.proto', 'esphome/components/api/api_options.proto'];
|
||||
|
||||
async function detectApiProto(changedFiles) {
|
||||
const labels = new Set();
|
||||
if (changedFiles.some(file => API_PROTO_FILES.includes(file))) {
|
||||
labels.add('api.proto');
|
||||
}
|
||||
return labels;
|
||||
}
|
||||
|
||||
// Strategy: PR Template Checkbox detection
|
||||
async function detectPRTemplateCheckboxes(context) {
|
||||
const labels = new Set();
|
||||
@@ -472,7 +460,6 @@ module.exports = {
|
||||
detectGitHubActionsChanges,
|
||||
detectCodeOwner,
|
||||
detectTests,
|
||||
detectApiProto,
|
||||
detectPRTemplateCheckboxes,
|
||||
detectDeprecatedComponents,
|
||||
detectMaintainerAccess,
|
||||
|
||||
@@ -10,7 +10,6 @@ const {
|
||||
detectGitHubActionsChanges,
|
||||
detectCodeOwner,
|
||||
detectTests,
|
||||
detectApiProto,
|
||||
detectPRTemplateCheckboxes,
|
||||
detectDeprecatedComponents,
|
||||
detectMaintainerAccess,
|
||||
@@ -115,7 +114,6 @@ module.exports = async ({ github, context }) => {
|
||||
actionsLabels,
|
||||
codeOwnerLabels,
|
||||
testLabels,
|
||||
apiProtoLabels,
|
||||
checkboxLabels,
|
||||
deprecatedResult,
|
||||
maintainerAccess
|
||||
@@ -130,7 +128,6 @@ module.exports = async ({ github, context }) => {
|
||||
detectGitHubActionsChanges(changedFiles),
|
||||
detectCodeOwner(github, context, changedFiles),
|
||||
detectTests(changedFiles),
|
||||
detectApiProto(changedFiles),
|
||||
detectPRTemplateCheckboxes(context),
|
||||
detectDeprecatedComponents(github, context, changedFiles),
|
||||
detectMaintainerAccess(context)
|
||||
@@ -159,7 +156,6 @@ module.exports = async ({ github, context }) => {
|
||||
...actionsLabels,
|
||||
...codeOwnerLabels,
|
||||
...testLabels,
|
||||
...apiProtoLabels,
|
||||
...checkboxLabels,
|
||||
...deprecatedLabels
|
||||
]);
|
||||
|
||||
@@ -1,7 +1,6 @@
|
||||
const { describe, it } = require('node:test');
|
||||
const assert = require('node:assert/strict');
|
||||
const {
|
||||
detectApiProto,
|
||||
detectMergeBranch,
|
||||
detectNewPlatforms,
|
||||
detectNewComponents,
|
||||
@@ -376,27 +375,6 @@ describe('detectRequirements', () => {
|
||||
});
|
||||
});
|
||||
|
||||
// ---------------------------------------------------------------------------
|
||||
// detectApiProto
|
||||
// ---------------------------------------------------------------------------
|
||||
|
||||
describe('detectApiProto', () => {
|
||||
it('labels a PR that changes api.proto', async () => {
|
||||
const labels = await detectApiProto(['esphome/components/api/api.proto', 'esphome/components/api/api_pb2.cpp']);
|
||||
assert.deepEqual(Array.from(labels), ['api.proto']);
|
||||
});
|
||||
|
||||
it('labels a PR that changes only api_options.proto', async () => {
|
||||
const labels = await detectApiProto(['esphome/components/api/api_options.proto']);
|
||||
assert.deepEqual(Array.from(labels), ['api.proto']);
|
||||
});
|
||||
|
||||
it('ignores the generated protocol files and other components', async () => {
|
||||
const labels = await detectApiProto(['esphome/components/api/api_pb2.cpp', 'esphome/components/uart/api.proto']);
|
||||
assert.equal(labels.size, 0);
|
||||
});
|
||||
});
|
||||
|
||||
// ---------------------------------------------------------------------------
|
||||
// MANAGED_LABELS
|
||||
// ---------------------------------------------------------------------------
|
||||
@@ -409,10 +387,6 @@ describe('MANAGED_LABELS', () => {
|
||||
it('includes needs-developer-docs so the workflow syncs it', () => {
|
||||
assert.ok(MANAGED_LABELS.includes('needs-developer-docs'));
|
||||
});
|
||||
|
||||
it('includes api.proto so the workflow removes it when the file drops out of the diff', () => {
|
||||
assert.ok(MANAGED_LABELS.includes('api.proto'));
|
||||
});
|
||||
});
|
||||
|
||||
// ---------------------------------------------------------------------------
|
||||
|
||||
@@ -313,7 +313,6 @@ jobs:
|
||||
- "3.12"
|
||||
- "3.13"
|
||||
- "3.14"
|
||||
- "3.15"
|
||||
os:
|
||||
- ubuntu-latest
|
||||
- macOS-latest
|
||||
@@ -630,7 +629,7 @@ jobs:
|
||||
apt-get install -y libc6-dbg
|
||||
|
||||
- name: Run CodSpeed benchmarks
|
||||
uses: CodSpeedHQ/action@821a40cd6c80e3cfe387caf55668287addd808da # v5.5.0
|
||||
uses: CodSpeedHQ/action@f842b9a3ffe213dbb81768fd7f7eeb4dfcf1c369 # v5.4.2
|
||||
with:
|
||||
run: |
|
||||
. venv/bin/activate
|
||||
@@ -1007,19 +1006,19 @@ jobs:
|
||||
- id: clang-tidy
|
||||
name: Run script/clang-tidy for ESP32 S3
|
||||
# yamllint disable-line rule:line-length
|
||||
options: --environment esp32s3-idf-tidy --grep SOC_TEMP_SENSOR_SUPPORTED --grep SOC_RISCV_COPROC_SUPPORTED --grep USE_ESP32_VARIANT_ESP32S3 --grep USE_LOGGER_USB_CDC --grep SOC_I2S_SUPPORTS_TDM --grep USE_OPENTHREAD
|
||||
options: --environment esp32s3-idf-tidy --grep SOC_TEMP_SENSOR_SUPPORTED --grep USE_ESP32_VARIANT_ESP32S3 --grep USE_LOGGER_USB_CDC --grep SOC_I2S_SUPPORTS_TDM --grep USE_OPENTHREAD
|
||||
tidy_environment: esp32s3-idf-tidy
|
||||
- id: clang-tidy
|
||||
name: Run script/clang-tidy for ESP32 P4
|
||||
# P4 has no native Wi-Fi/BLE; those run over the hosted co-processor,
|
||||
# so their code paths differ -- lint them under the P4 build too.
|
||||
# yamllint disable-line rule:line-length
|
||||
options: --environment esp32p4-idf-tidy --grep USE_ESP32_VARIANT_ESP32P4 --grep SOC_LP_CORE_SUPPORTED --grep CONFIG_IDF_TARGET_ESP32P4 --grep USE_ESP32_HOSTED --grep USE_WIFI --grep USE_BLE
|
||||
options: --environment esp32p4-idf-tidy --grep USE_ESP32_VARIANT_ESP32P4 --grep CONFIG_IDF_TARGET_ESP32P4 --grep USE_ESP32_HOSTED --grep USE_WIFI --grep USE_BLE
|
||||
tidy_environment: esp32p4-idf-tidy
|
||||
- id: clang-tidy
|
||||
name: Run script/clang-tidy for ESP32 C6
|
||||
# yamllint disable-line rule:line-length
|
||||
options: --environment esp32c6-idf-tidy --grep SOC_LP_I2C_SUPPORTED --grep SOC_LP_CORE_SUPPORTED --grep USE_ESP32_VARIANT_ESP32C6 --grep USE_OPENTHREAD --grep USE_ZIGBEE
|
||||
options: --environment esp32c6-idf-tidy --grep SOC_LP_I2C_SUPPORTED --grep USE_ESP32_VARIANT_ESP32C6 --grep USE_OPENTHREAD --grep USE_ZIGBEE
|
||||
tidy_environment: esp32c6-idf-tidy
|
||||
|
||||
steps:
|
||||
|
||||
@@ -56,7 +56,7 @@ jobs:
|
||||
|
||||
# Initializes the CodeQL tools for scanning.
|
||||
- name: Initialize CodeQL
|
||||
uses: github/codeql-action/init@6f2ac81f5cd81fe351a197ba0b00d91d03cd2aee # v4.39.0
|
||||
uses: github/codeql-action/init@24c54180a607b1449ed407dd24f251e4e9147c8d # v4.38.3
|
||||
with:
|
||||
languages: ${{ matrix.language }}
|
||||
build-mode: ${{ matrix.build-mode }}
|
||||
@@ -84,6 +84,6 @@ jobs:
|
||||
exit 1
|
||||
|
||||
- name: Perform CodeQL Analysis
|
||||
uses: github/codeql-action/analyze@6f2ac81f5cd81fe351a197ba0b00d91d03cd2aee # v4.39.0
|
||||
uses: github/codeql-action/analyze@24c54180a607b1449ed407dd24f251e4e9147c8d # v4.38.3
|
||||
with:
|
||||
category: "/language:${{matrix.language}}"
|
||||
|
||||
@@ -14,4 +14,4 @@ jobs:
|
||||
permissions:
|
||||
issues: write # issues.lock on closed issues
|
||||
pull-requests: write # issues.lock on closed pull requests
|
||||
uses: esphome/workflows/.github/workflows/lock.yml@31d160e5f0ffa0ee65d5b27cb55c153d415f2abe # 2026.10.2
|
||||
uses: esphome/workflows/.github/workflows/lock.yml@cc3e76de337dc59bc1cba8da58d963cd23b873f1 # 2026.9.0
|
||||
|
||||
@@ -0,0 +1,39 @@
|
||||
{
|
||||
"problemMatcher": [
|
||||
{
|
||||
"owner": "ruff",
|
||||
"severity": "error",
|
||||
"pattern": [
|
||||
{
|
||||
"regexp": "^(.*): (Please format this file with the ruff formatter)",
|
||||
"file": 1,
|
||||
"message": 2
|
||||
}
|
||||
]
|
||||
},
|
||||
{
|
||||
"owner": "flake8",
|
||||
"severity": "error",
|
||||
"pattern": [
|
||||
{
|
||||
"regexp": "^(.*):(\\d+): ([EFCDNW]\\d{3}.*)$",
|
||||
"file": 1,
|
||||
"line": 2,
|
||||
"message": 3
|
||||
}
|
||||
]
|
||||
},
|
||||
{
|
||||
"owner": "pylint",
|
||||
"severity": "error",
|
||||
"pattern": [
|
||||
{
|
||||
"regexp": "^(.*):(\\d+): (\\[[EFCRW]\\d{4}\\(.*\\),.*\\].*)$",
|
||||
"file": 1,
|
||||
"line": 2,
|
||||
"message": 3
|
||||
}
|
||||
]
|
||||
}
|
||||
]
|
||||
}
|
||||
@@ -16,7 +16,7 @@ jobs:
|
||||
# No GITHUB_TOKEN permissions: the reusable workflow mints an ESPHome
|
||||
# GitHub App token so the labels, comments and closures come from
|
||||
# esphome[bot] instead of github-actions[bot].
|
||||
uses: esphome/workflows/.github/workflows/stale.yml@31d160e5f0ffa0ee65d5b27cb55c153d415f2abe # main
|
||||
uses: esphome/workflows/.github/workflows/stale.yml@4fbce13026c393d6eb6b247e394dcd9ef1af76c2 # main
|
||||
secrets:
|
||||
ESPHOME_GITHUB_APP_PRIVATE_KEY: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
|
||||
with:
|
||||
|
||||
@@ -85,7 +85,7 @@ jobs:
|
||||
- name: Verify prek clean
|
||||
# Second pass: re-run all hooks against the now-fixed tree.
|
||||
# Auto-fixers exit 0 (nothing to change); any remaining failure
|
||||
# from a check-only hook (yamllint / ci-custom) is a
|
||||
# from a check-only hook (flake8 / yamllint / ci-custom) is a
|
||||
# real issue and fails the workflow loudly. Same PREK_SKIP list as
|
||||
# above for the same reasons.
|
||||
env:
|
||||
|
||||
+10
-2
@@ -10,13 +10,21 @@ ci:
|
||||
repos:
|
||||
- repo: https://github.com/astral-sh/ruff-pre-commit
|
||||
# Ruff version.
|
||||
rev: v0.17.1
|
||||
rev: v0.17.0
|
||||
hooks:
|
||||
# Run the linter.
|
||||
- id: ruff
|
||||
args: [--fix]
|
||||
# Run the formatter.
|
||||
- id: ruff-format
|
||||
- repo: https://github.com/PyCQA/flake8
|
||||
rev: 7.4.1
|
||||
hooks:
|
||||
- id: flake8
|
||||
additional_dependencies:
|
||||
- flake8-docstrings==1.7.0
|
||||
- pydocstyle==5.1.1
|
||||
files: ^(esphome|tests)/.+\.py$
|
||||
- repo: https://github.com/pre-commit/pre-commit-hooks
|
||||
rev: v5.0.0
|
||||
hooks:
|
||||
@@ -38,7 +46,7 @@ repos:
|
||||
- id: yamllint
|
||||
exclude: ^(\.clang-format|\.clang-tidy)$
|
||||
- repo: https://github.com/pre-commit/mirrors-clang-format
|
||||
rev: v23.1.3
|
||||
rev: v13.0.1
|
||||
hooks:
|
||||
- id: clang-format
|
||||
types_or: [c, c++]
|
||||
|
||||
@@ -55,7 +55,7 @@ file does, and it is the authority when they disagree. The most useful starting
|
||||
* https://developers.esphome.io/contributing/code/ - contribution rules, public API and breaking changes.
|
||||
|
||||
* **Formatting:**
|
||||
* **Python:** Uses `ruff` for linting and formatting. Configuration is in `pyproject.toml`.
|
||||
* **Python:** Uses `ruff` and `flake8` for linting and formatting. Configuration is in `pyproject.toml`.
|
||||
* **C++:** Uses `clang-format` for formatting. Configuration is in `.clang-format`.
|
||||
|
||||
* **Naming Conventions:**
|
||||
@@ -80,15 +80,13 @@ file does, and it is the authority when they disagree. The most useful starting
|
||||
```python
|
||||
# Bad - looks up CONF_BLAH twice
|
||||
if CONF_BLAH in config:
|
||||
cg.add(var.set_blah_ms(config[CONF_BLAH].total_milliseconds))
|
||||
cg.add(var.set_blah(config[CONF_BLAH]))
|
||||
|
||||
# Good - single lookup, value bound inline
|
||||
if (blah := config.get(CONF_BLAH)) is not None:
|
||||
cg.add(var.set_blah_ms(blah.total_milliseconds))
|
||||
cg.add(var.set_blah(blah))
|
||||
```
|
||||
The same applies to `while` loops and comprehensions where it avoids recomputing a value. Don't contort code to use it — reach for `:=` only when it genuinely cuts repetition or an extra assignment line.
|
||||
When the setter takes the value unchanged, use `cg.add_optional(var.set_blah, config.get(CONF_BLAH))`
|
||||
instead; it is not awaited, and it skips only `None`, so `0` and `False` are still set.
|
||||
|
||||
* **C++ Field Visibility:**
|
||||
* **Prefer `protected`:** Use `protected` for most class fields to enable extensibility and testing. Fields should be `lower_snake_case_with_trailing_underscore_`.
|
||||
@@ -210,14 +208,8 @@ file does, and it is the authority when they disagree. The most useful starting
|
||||
* **Fixed sets of names** (status words, model names): a `PROGMEM_STRING_TABLE` (`esphome/core/progmem.h`),
|
||||
logged with `get_log_str` and `LOG_STR_ARG`, copied out with `ESPHOME_strncpy_P` before `publish_state`.
|
||||
A `dump_config` helper that picks a name returns `const LogString *` from `LOG_STR(...)`.
|
||||
* **CRCs and bit tricks** come from `esphome/core/helpers.h` (`crc8`, `crc16`, `xor_bytes`, `sum16_bytes`,
|
||||
`reverse_bits`, `encode_uint16`, `encode_value_le`, `sign_extend<BITS>`, `bcd_to_uint8`); pick the helper's
|
||||
arguments instead of writing a loop. Epson style 7-byte RTC calendars (one-hot weekday) use
|
||||
`time::decode_bcd_calendar`.
|
||||
* **Bus helpers:** UART drains with `read_available(on_byte)` and `discard_available()`, text lines with
|
||||
`LineReader<N>`; I2C has `update_register`, `write_registers` (PROGMEM `I2CRegValue` table), `check_chip_id`
|
||||
and `read_bytes_16_le`. `if (!this->status_comm_result(ok)) return;` sets or clears the warning.
|
||||
A child sensor that skips repeated values is `SUB_SENSOR_WITH_DEDUP(name, type)`.
|
||||
* **CRCs and bit tricks** come from `esphome/core/helpers.h` (`crc8`, `crc16`, `reverse_bits`, `encode_uint16`);
|
||||
pick the helper's polynomial and bit-order arguments instead of writing a CRC loop.
|
||||
* **An unset float is `NAN`**, not `optional<float>`; the optional costs 4 to 8 bytes of padding per member.
|
||||
* **`PollingComponent` first runs `update()`** after a random share of the interval; call `this->update()` at the
|
||||
end of `setup()` when the entities need a state at boot.
|
||||
@@ -437,22 +429,6 @@ file does, and it is the authority when they disagree. The most useful starting
|
||||
and `await cg.add_variable(var.set_bus, config[CONF_BUS_ID])`; both skip a `None` value, so pass
|
||||
`config.get(KEY)` for an optional key, and return what they created. Use `cg.register_parented` for `set_parent`.
|
||||
|
||||
- **Hub forwarding entities need no C++ class:** a button, switch, number or select that only calls its hub
|
||||
uses `button.ApplyButton` (`switch.ApplySwitch`, `number.ApplyNumber`, `select.ApplySelect`) in its schema
|
||||
and `apply=` on the `sub_*` call. The body is a call on the hub with `entity` and `state`, `value` or
|
||||
`index`/`option` in scope; on a switch, number or select `publish="before"` or `"after"` publishes the state.
|
||||
```python
|
||||
switches = switch.sub_switches(config, parent=hub)
|
||||
await switches(CONF_BLUETOOTH, None, apply="set_bluetooth(state)", publish="after")
|
||||
```
|
||||
|
||||
- **Other codegen helpers:** `uart.new_uart_component(config, *ctor_args)` (and `i2c.new_i2c_component`,
|
||||
`spi.new_spi_component`, `modbus.new_modbus_client_component`, `ble_client.new_ble_node_component`)
|
||||
constructs, registers and attaches in one call; `display.add_writer(var, config)` sets the lambda;
|
||||
`MyEnum.options("on", prefix="MY_ENUM_")` builds an enum dict; `button.restart_button_schema(cls)` (and
|
||||
`factory_reset_`, `query_`) are button presets; `fv.get_declaring_config(id)` finds a hub's config in
|
||||
final validation.
|
||||
|
||||
* **Automations (Triggers, Actions, Conditions):**
|
||||
|
||||
Automations have three building blocks: **Triggers** (fire when something happens), **Actions** (do something), and **Conditions** (check if something is true).
|
||||
|
||||
+10
-9
@@ -133,7 +133,7 @@ esphome/components/climate/* @esphome/core
|
||||
esphome/components/climate_ir/* @glmnet
|
||||
esphome/components/cm1106/* @andrewjswan
|
||||
esphome/components/color_temperature/* @jesserockz
|
||||
esphome/components/combination/* @kahrendt
|
||||
esphome/components/combination/* @Cat-Ion @kahrendt
|
||||
esphome/components/const/* @esphome/core
|
||||
esphome/components/coolix/* @glmnet
|
||||
esphome/components/copy/* @OttoWinter
|
||||
@@ -186,6 +186,7 @@ esphome/components/ens160_base/* @latonita @vincentscode
|
||||
esphome/components/ens160_i2c/* @latonita
|
||||
esphome/components/ens160_spi/* @latonita
|
||||
esphome/components/ens210/* @itn3rd77
|
||||
esphome/components/entity_transport/* @clydebarrow
|
||||
esphome/components/epaper_spi/* @esphome/core
|
||||
esphome/components/es7210/* @kahrendt
|
||||
esphome/components/es7243e/* @kbx81
|
||||
@@ -205,7 +206,6 @@ esphome/components/esp32_hosted/update/* @swoboda1337
|
||||
esphome/components/esp32_power_management/* @rwrozelle
|
||||
esphome/components/esp32_rmt/* @jesserockz
|
||||
esphome/components/esp32_rmt_led_strip/* @jesserockz
|
||||
esphome/components/esp32_ulp/* @swoboda1337
|
||||
esphome/components/esp8266/* @esphome/core
|
||||
esphome/components/esp_ldo/* @clydebarrow
|
||||
esphome/components/espectre/* @francescopace
|
||||
@@ -458,6 +458,8 @@ esphome/components/openthread/* @mrene
|
||||
esphome/components/opt3001/* @ccutrer
|
||||
esphome/components/ota/* @esphome/core
|
||||
esphome/components/output/* @esphome/core
|
||||
esphome/components/packet_interface/* @clydebarrow
|
||||
esphome/components/packet_interface/packet_transport/* @clydebarrow
|
||||
esphome/components/packet_transport/* @clydebarrow
|
||||
esphome/components/pca6416a/* @Mat931
|
||||
esphome/components/pca9505/* @ajfriesen @ssieb
|
||||
@@ -602,10 +604,7 @@ esphome/components/ssd1331_base/* @kbx81
|
||||
esphome/components/ssd1331_spi/* @kbx81
|
||||
esphome/components/ssd1351_base/* @kbx81
|
||||
esphome/components/ssd1351_spi/* @kbx81
|
||||
esphome/components/st25r/* @JohnMcLear
|
||||
esphome/components/st25r_spi/* @JohnMcLear
|
||||
esphome/components/st7123/* @miniskipper
|
||||
esphome/components/st7305/* @clydebarrow
|
||||
esphome/components/st7567_base/* @latonita
|
||||
esphome/components/st7567_i2c/* @latonita
|
||||
esphome/components/st7567_spi/* @latonita
|
||||
@@ -622,7 +621,9 @@ esphome/components/sun_gtil2/* @Mat931
|
||||
esphome/components/switch/* @esphome/core
|
||||
esphome/components/switch/binary_sensor/* @ssieb
|
||||
esphome/components/sx126x/* @swoboda1337
|
||||
esphome/components/sx126x/packet_interface/* @clydebarrow
|
||||
esphome/components/sx127x/* @swoboda1337
|
||||
esphome/components/sx127x/packet_interface/* @clydebarrow
|
||||
esphome/components/sy6970/* @linkedupbits
|
||||
esphome/components/syslog/* @clydebarrow
|
||||
esphome/components/systa_bus/* @Mat931
|
||||
@@ -634,6 +635,8 @@ esphome/components/tca8418/* @zebble
|
||||
esphome/components/tca9548a/* @andreashergert1984
|
||||
esphome/components/tca9555/* @mobrembski
|
||||
esphome/components/tcl112/* @glmnet
|
||||
esphome/components/tcp/* @clydebarrow
|
||||
esphome/components/tcp/packet_interface/* @clydebarrow
|
||||
esphome/components/tcp_uart/* @Bascht74
|
||||
esphome/components/tee501/* @Stock-M
|
||||
esphome/components/teleinfo/* @0hax @FredM67
|
||||
@@ -677,10 +680,12 @@ esphome/components/tuya/water_heater/* @iago-veiga
|
||||
esphome/components/uart/* @esphome/core
|
||||
esphome/components/uart/button/* @ssieb
|
||||
esphome/components/uart/event/* @eoasmxd
|
||||
esphome/components/uart/packet_interface/* @clydebarrow
|
||||
esphome/components/uart/packet_transport/* @clydebarrow
|
||||
esphome/components/uart_mux/* @kbx81
|
||||
esphome/components/uart_tcp/* @Bascht74
|
||||
esphome/components/udp/* @clydebarrow
|
||||
esphome/components/udp/packet_interface/* @clydebarrow
|
||||
esphome/components/ufire_ec/* @pvizeli
|
||||
esphome/components/ufire_ise/* @pvizeli
|
||||
esphome/components/ufm01/* @ljungqvist
|
||||
@@ -688,19 +693,15 @@ esphome/components/ultrasonic/* @ssieb @swoboda1337
|
||||
esphome/components/unicode/* @esphome/core
|
||||
esphome/components/update/* @jesserockz
|
||||
esphome/components/uponor_smatrix/* @kroimon
|
||||
esphome/components/usb_audio/* @ab-tools
|
||||
esphome/components/usb_cdc_acm/* @kbx81
|
||||
esphome/components/usb_host/* @clydebarrow
|
||||
esphome/components/usb_uart/* @clydebarrow
|
||||
esphome/components/valve/* @esphome/core
|
||||
esphome/components/vbus/* @ssieb
|
||||
esphome/components/veml3235/* @kbx81
|
||||
esphome/components/veml6040/* @aalaei
|
||||
esphome/components/veml7700/* @latonita
|
||||
esphome/components/version/* @esphome/core
|
||||
esphome/components/vevor_dtx/* @Bofr5555
|
||||
esphome/components/vl53l1x/* @will-tm
|
||||
esphome/components/vnc/* @MindFreeze
|
||||
esphome/components/voice_assistant/* @jesserockz @kahrendt
|
||||
esphome/components/wake_on_lan/* @clydebarrow @willwill2will54
|
||||
esphome/components/watchdog/* @oarcher
|
||||
|
||||
@@ -11,9 +11,6 @@ coverage:
|
||||
ignore:
|
||||
- "esphome/components/**/*"
|
||||
- "esphome/analyze_memory/**/*"
|
||||
# Run as standalone scripts under the ESP-IDF Python, never imported by pytest
|
||||
- "esphome/espidf/get_idf_tool_paths.py"
|
||||
- "esphome/espidf/get_idf_version.py"
|
||||
- "tests/integration/**/*"
|
||||
|
||||
comment:
|
||||
|
||||
+1
-1
@@ -22,7 +22,7 @@ RUN \
|
||||
-r /requirements.txt
|
||||
|
||||
# Install the ESPHome Device Builder dashboard.
|
||||
RUN uv pip install --no-cache-dir esphome-device-builder==1.26.0
|
||||
RUN uv pip install --no-cache-dir esphome-device-builder==1.24.0
|
||||
|
||||
RUN \
|
||||
platformio settings set enable_telemetry No \
|
||||
|
||||
@@ -791,7 +791,6 @@ def write_cpp(config: ConfigType) -> int:
|
||||
|
||||
if not get_bool_env(ENV_NOGITIGNORE):
|
||||
writer.write_gitignore()
|
||||
writer.check_build_tree_not_tracked()
|
||||
|
||||
generate_cpp_contents(config)
|
||||
return write_cpp_file()
|
||||
|
||||
+3
-11
@@ -430,20 +430,12 @@ def _apply_function(
|
||||
) -> MockObj:
|
||||
"""Emit the generated function and declare ``id_`` as the ``ApplyAction`` or
|
||||
``ApplyCondition`` templated on it, so ``play()`` calls it directly."""
|
||||
fn = apply_static_function(id_, return_type, lambda_args, statements)
|
||||
fn = cg.static_function(
|
||||
f"esphome__{id_.id}__fn", return_type, lambda_args, statements
|
||||
)
|
||||
return cg.new_Pvariable(id_, cg.TemplateArguments(fn, *template_arg))
|
||||
|
||||
|
||||
def apply_static_function(
|
||||
id_: ID,
|
||||
return_type: SafeExpType,
|
||||
params: TemplateArgsType,
|
||||
statements: list[str],
|
||||
) -> MockObj:
|
||||
"""Emit the static function generated for ``id_`` and return an expression naming it."""
|
||||
return cg.static_function(f"esphome__{id_.id}__fn", return_type, params, statements)
|
||||
|
||||
|
||||
async def _render_values(
|
||||
name: str,
|
||||
target: str,
|
||||
|
||||
@@ -8,14 +8,12 @@ import textwrap
|
||||
|
||||
from esphome.build_helpers import pch
|
||||
from esphome.components.esp32 import (
|
||||
KEY_SRC_CMAKE,
|
||||
get_esp32_variant,
|
||||
get_excluded_builtin_components,
|
||||
get_managed_component_require_names,
|
||||
idf_version,
|
||||
)
|
||||
import esphome.config_validation as cv
|
||||
from esphome.const import KEY_ESP32
|
||||
from esphome.core import CORE
|
||||
from esphome.espidf import variant_to_idf_target
|
||||
from esphome.framework_helpers import (
|
||||
@@ -462,7 +460,6 @@ def get_component_cmakelists() -> str:
|
||||
# get_project_cmakelists so they reach every component, not just src/.
|
||||
link_opts = get_project_link_flags()
|
||||
link_opts_str = "\n ".join(link_opts) if link_opts else ""
|
||||
src_cmake = "\n".join(CORE.data[KEY_ESP32].get(KEY_SRC_CMAKE, []))
|
||||
|
||||
return f"""\
|
||||
# Auto-generated by ESPHome
|
||||
@@ -508,7 +505,6 @@ idf_component_register(
|
||||
target_link_options(${{COMPONENT_LIB}} PUBLIC
|
||||
{link_opts_str}
|
||||
)
|
||||
{src_cmake}
|
||||
{_pch_cmake_block()}"""
|
||||
|
||||
|
||||
|
||||
@@ -53,7 +53,6 @@ from esphome.cpp_generator import ( # noqa: F401
|
||||
with_local_variable,
|
||||
)
|
||||
from esphome.cpp_helpers import ( # noqa: F401
|
||||
add_optional,
|
||||
add_pin,
|
||||
add_variable,
|
||||
build_registry_entry,
|
||||
|
||||
@@ -10,7 +10,7 @@ void AbsoluteHumidityComponent::setup() {
|
||||
this->temperature_ = state;
|
||||
this->enable_loop();
|
||||
});
|
||||
ESP_LOGD(TAG, " Added callback for temperature '%s'", LOG_STR_ARG(this->temperature_sensor_->get_log_name()));
|
||||
ESP_LOGD(TAG, " Added callback for temperature '%s'", this->temperature_sensor_->get_name().c_str());
|
||||
// Get initial value
|
||||
if (this->temperature_sensor_->has_state()) {
|
||||
this->temperature_ = this->temperature_sensor_->get_state();
|
||||
@@ -20,7 +20,7 @@ void AbsoluteHumidityComponent::setup() {
|
||||
this->humidity_ = state;
|
||||
this->enable_loop();
|
||||
});
|
||||
ESP_LOGD(TAG, " Added callback for relative humidity '%s'", LOG_STR_ARG(this->humidity_sensor_->get_log_name()));
|
||||
ESP_LOGD(TAG, " Added callback for relative humidity '%s'", this->humidity_sensor_->get_name().c_str());
|
||||
// Get initial value
|
||||
if (this->humidity_sensor_->has_state()) {
|
||||
this->humidity_ = this->humidity_sensor_->get_state();
|
||||
@@ -49,8 +49,7 @@ void AbsoluteHumidityComponent::dump_config() {
|
||||
"Sources\n"
|
||||
" Temperature: '%s'\n"
|
||||
" Relative Humidity: '%s'",
|
||||
LOG_STR_ARG(this->temperature_sensor_->get_log_name()),
|
||||
LOG_STR_ARG(this->humidity_sensor_->get_log_name()));
|
||||
this->temperature_sensor_->get_name().c_str(), this->humidity_sensor_->get_name().c_str());
|
||||
}
|
||||
|
||||
void AbsoluteHumidityComponent::loop() {
|
||||
|
||||
@@ -184,9 +184,11 @@ void AcDimmer::setup() {
|
||||
this->store_.zero_cross_pin_number = this->zero_cross_pin_->get_pin();
|
||||
this->store_.min_power = static_cast<uint16_t>(this->min_power_ * 1000);
|
||||
this->min_power_ = 0;
|
||||
this->store_.method = this->method_;
|
||||
|
||||
if (setup_zero_cross_pin) {
|
||||
this->zero_cross_pin_->setup();
|
||||
this->store_.zero_cross_pin = this->zero_cross_pin_->to_isr();
|
||||
this->zero_cross_pin_->attach_interrupt(&AcDimmerDataStore::s_gpio_intr, &this->store_,
|
||||
this->zero_cross_interrupt_type_);
|
||||
}
|
||||
@@ -225,18 +227,24 @@ void AcDimmer::dump_config() {
|
||||
ESP_LOGCONFIG(TAG,
|
||||
"AcDimmer:\n"
|
||||
" Min Power: %.1f%%\n"
|
||||
" Init with half cycle: %s\n"
|
||||
" Interrupt Type: %s\n"
|
||||
" Method: %s",
|
||||
this->store_.min_power / 10.0f, YESNO(this->init_with_half_cycle_),
|
||||
this->zero_cross_interrupt_type_ == gpio::INTERRUPT_RISING_EDGE ? LOG_STR_LITERAL("rising")
|
||||
: this->zero_cross_interrupt_type_ == gpio::INTERRUPT_FALLING_EDGE ? LOG_STR_LITERAL("falling")
|
||||
: LOG_STR_LITERAL("any"),
|
||||
this->store_.method == DIM_METHOD_LEADING_PULSE ? LOG_STR_LITERAL("leading pulse")
|
||||
: this->store_.method == DIM_METHOD_LEADING ? LOG_STR_LITERAL("leading")
|
||||
: LOG_STR_LITERAL("trailing"));
|
||||
" Init with half cycle: %s",
|
||||
this->store_.min_power / 10.0f, YESNO(this->init_with_half_cycle_));
|
||||
LOG_PIN(" Output Pin: ", this->gate_pin_);
|
||||
LOG_PIN(" Zero-Cross Pin: ", this->zero_cross_pin_);
|
||||
if (this->zero_cross_interrupt_type_ == gpio::INTERRUPT_RISING_EDGE) {
|
||||
ESP_LOGCONFIG(TAG, " Interrupt Type: rising");
|
||||
} else if (this->zero_cross_interrupt_type_ == gpio::INTERRUPT_FALLING_EDGE) {
|
||||
ESP_LOGCONFIG(TAG, " Interrupt Type: falling");
|
||||
} else {
|
||||
ESP_LOGCONFIG(TAG, " Interrupt Type: any");
|
||||
}
|
||||
if (method_ == DIM_METHOD_LEADING_PULSE) {
|
||||
ESP_LOGCONFIG(TAG, " Method: leading pulse");
|
||||
} else if (method_ == DIM_METHOD_LEADING) {
|
||||
ESP_LOGCONFIG(TAG, " Method: leading");
|
||||
} else {
|
||||
ESP_LOGCONFIG(TAG, " Method: trailing");
|
||||
}
|
||||
LOG_FLOAT_OUTPUT(this);
|
||||
ESP_LOGV(TAG, " Estimated Frequency: %.3fHz", 1e6f / this->store_.cycle_time_us / 2);
|
||||
}
|
||||
|
||||
@@ -6,11 +6,19 @@
|
||||
|
||||
namespace esphome::ac_dimmer {
|
||||
|
||||
enum DimMethod : uint8_t { DIM_METHOD_LEADING_PULSE = 0, DIM_METHOD_LEADING, DIM_METHOD_TRAILING };
|
||||
enum DimMethod { DIM_METHOD_LEADING_PULSE = 0, DIM_METHOD_LEADING, DIM_METHOD_TRAILING };
|
||||
|
||||
struct AcDimmerDataStore {
|
||||
/// Zero-cross pin
|
||||
ISRInternalGPIOPin zero_cross_pin;
|
||||
/// Zero-cross pin number - used to share ZC pin across multiple dimmers
|
||||
uint8_t zero_cross_pin_number;
|
||||
/// Output pin to write to
|
||||
ISRInternalGPIOPin gate_pin;
|
||||
/// Value of the dimmer - 0 to 65535.
|
||||
uint16_t value;
|
||||
/// Minimum power for activation
|
||||
uint16_t min_power;
|
||||
/// Time between the last two ZC pulses
|
||||
uint32_t cycle_time_us;
|
||||
/// Time (in micros()) of last ZC signal
|
||||
@@ -19,12 +27,6 @@ struct AcDimmerDataStore {
|
||||
uint32_t enable_time_us;
|
||||
/// Time since last ZC pulse to disable gate pin. 0 means no disable.
|
||||
uint32_t disable_time_us;
|
||||
/// Value of the dimmer - 0 to 65535.
|
||||
uint16_t value;
|
||||
/// Minimum power for activation
|
||||
uint16_t min_power;
|
||||
/// Zero-cross pin number - used to share ZC pin across multiple dimmers
|
||||
uint8_t zero_cross_pin_number;
|
||||
/// Set to send the first half ac cycle complete
|
||||
bool init_cycle;
|
||||
/// Dimmer method
|
||||
@@ -48,16 +50,17 @@ class AcDimmer final : public output::FloatOutput, public Component {
|
||||
void set_zero_cross_pin(InternalGPIOPin *zero_cross_pin) { zero_cross_pin_ = zero_cross_pin; }
|
||||
void set_zero_cross_interrupt_type(gpio::InterruptType type) { zero_cross_interrupt_type_ = type; }
|
||||
void set_init_with_half_cycle(bool init_with_half_cycle) { init_with_half_cycle_ = init_with_half_cycle; }
|
||||
void set_method(DimMethod method) { this->store_.method = method; }
|
||||
void set_method(DimMethod method) { method_ = method; }
|
||||
|
||||
protected:
|
||||
void write_state(float state) override;
|
||||
|
||||
InternalGPIOPin *gate_pin_;
|
||||
InternalGPIOPin *zero_cross_pin_;
|
||||
AcDimmerDataStore store_;
|
||||
gpio::InterruptType zero_cross_interrupt_type_;
|
||||
AcDimmerDataStore store_;
|
||||
bool init_with_half_cycle_;
|
||||
DimMethod method_;
|
||||
};
|
||||
|
||||
} // namespace esphome::ac_dimmer
|
||||
|
||||
@@ -66,7 +66,7 @@ template class Aggregator<uint32_t>;
|
||||
|
||||
void ADCSensor::update() {
|
||||
float value_v = this->sample();
|
||||
ESP_LOGV(TAG, "'%s': Voltage=%.4fV", LOG_STR_ARG(this->get_log_name()), value_v);
|
||||
ESP_LOGV(TAG, "'%s': Voltage=%.4fV", this->get_name().c_str(), value_v);
|
||||
this->publish_state(value_v);
|
||||
}
|
||||
|
||||
|
||||
@@ -94,11 +94,11 @@ void ADCSensor::setup() {
|
||||
}
|
||||
#elif defined(ADC_CALI_SCHEME_LINE_FITTING_SUPPORTED)
|
||||
adc_cali_line_fitting_config_t cali_config = {
|
||||
.unit_id = this->adc_unit_,
|
||||
.atten = this->attenuation_,
|
||||
.bitwidth = ADC_BITWIDTH_DEFAULT,
|
||||
.unit_id = this->adc_unit_,
|
||||
.atten = this->attenuation_,
|
||||
.bitwidth = ADC_BITWIDTH_DEFAULT,
|
||||
#if !defined(USE_ESP32_VARIANT_ESP32S2) && !defined(USE_ESP32_VARIANT_ESP32C2)
|
||||
.default_vref = 1100, // Default reference voltage in mV
|
||||
.default_vref = 1100, // Default reference voltage in mV
|
||||
#endif // !defined(USE_ESP32_VARIANT_ESP32S2) && !defined(USE_ESP32_VARIANT_ESP32C2)
|
||||
};
|
||||
err = adc_cali_create_scheme_line_fitting(&cali_config, &handle);
|
||||
@@ -248,11 +248,11 @@ float ADCSensor::sample_autorange_() {
|
||||
(err == ESP_OK) ? "SUCCESS" : "FAILED", err);
|
||||
#elif defined(ADC_CALI_SCHEME_LINE_FITTING_SUPPORTED)
|
||||
adc_cali_line_fitting_config_t cali_config = {
|
||||
.unit_id = this->adc_unit_,
|
||||
.atten = atten,
|
||||
.bitwidth = ADC_BITWIDTH_DEFAULT,
|
||||
.unit_id = this->adc_unit_,
|
||||
.atten = atten,
|
||||
.bitwidth = ADC_BITWIDTH_DEFAULT,
|
||||
#if !defined(USE_ESP32_VARIANT_ESP32S2) && !defined(USE_ESP32_VARIANT_ESP32C2)
|
||||
.default_vref = 1100,
|
||||
.default_vref = 1100,
|
||||
#endif
|
||||
};
|
||||
err = adc_cali_create_scheme_line_fitting(&cali_config, &handle);
|
||||
|
||||
@@ -111,8 +111,6 @@ static const LogString *input_to_str(uint8_t input) {
|
||||
return LOG_STR("VDD");
|
||||
case NRF_SAADC_INPUT_VDDHDIV5:
|
||||
return LOG_STR("VDDHDIV5");
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return LOG_STR("undefined input");
|
||||
}
|
||||
|
||||
@@ -13,7 +13,7 @@ float ADS1115Sensor::sample() {
|
||||
void ADS1115Sensor::update() {
|
||||
float v = this->sample();
|
||||
if (!std::isnan(v)) {
|
||||
ESP_LOGD(TAG, "'%s': Got Voltage=%fV", LOG_STR_ARG(this->get_log_name()), v);
|
||||
ESP_LOGD(TAG, "'%s': Got Voltage=%fV", this->get_name().c_str(), v);
|
||||
this->publish_state(v);
|
||||
}
|
||||
}
|
||||
|
||||
@@ -21,7 +21,7 @@ float ADS1118Sensor::sample() {
|
||||
void ADS1118Sensor::update() {
|
||||
float v = this->sample();
|
||||
if (!std::isnan(v)) {
|
||||
ESP_LOGD(TAG, "'%s': Got Voltage=%fV", LOG_STR_ARG(this->get_log_name()), v);
|
||||
ESP_LOGD(TAG, "'%s': Got Voltage=%fV", this->get_name().c_str(), v);
|
||||
this->publish_state(v);
|
||||
}
|
||||
}
|
||||
|
||||
@@ -136,7 +136,13 @@ void AirtonClimate::transmit_state() {
|
||||
data->set_carrier_frequency(AIRTON_IR_FREQUENCY);
|
||||
data->mark(AIRTON_HEADER_MARK);
|
||||
data->space(AIRTON_HEADER_SPACE);
|
||||
data->item_bytes<AIRTON_BIT_TIMINGS>(remote_state, AIRTON_STATE_FRAME_SIZE);
|
||||
for (uint8_t payload_byte : remote_state) {
|
||||
for (uint8_t payload_bit_cursor = 0; payload_bit_cursor < 8; payload_bit_cursor++) {
|
||||
data->mark(AIRTON_BIT_MARK);
|
||||
bool bit = payload_byte & (1 << payload_bit_cursor);
|
||||
data->space(bit ? AIRTON_ONE_SPACE : AIRTON_ZERO_SPACE);
|
||||
}
|
||||
}
|
||||
|
||||
data->mark(AIRTON_BIT_MARK);
|
||||
data->space(AIRTON_MESSAGE_SPACE);
|
||||
@@ -261,8 +267,6 @@ void AirtonClimate::parse_state_frame_(const uint8_t *frame) {
|
||||
case AIRTON_FAN_AUTO:
|
||||
this->fan_mode = climate::CLIMATE_FAN_AUTO;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
this->target_temperature = (frame[3] & 0b00001111) + AIRTON_TEMP_MIN;
|
||||
@@ -280,14 +284,20 @@ void AirtonClimate::parse_state_frame_(const uint8_t *frame) {
|
||||
}
|
||||
|
||||
bool AirtonClimate::on_receive(remote_base::RemoteReceiveData data) {
|
||||
uint8_t remote_state[AIRTON_STATE_FRAME_SIZE];
|
||||
uint8_t remote_state[AIRTON_STATE_FRAME_SIZE] = {};
|
||||
if (!data.expect_item(AIRTON_HEADER_MARK, AIRTON_HEADER_SPACE)) {
|
||||
ESP_LOGV(TAG, "Wrong header encoding detected!");
|
||||
return false;
|
||||
}
|
||||
if (!data.expect_bytes<AIRTON_BIT_TIMINGS>(remote_state, AIRTON_STATE_FRAME_SIZE)) {
|
||||
ESP_LOGV(TAG, "Wrong modulation encoding");
|
||||
return false;
|
||||
for (int i = 0; i < AIRTON_STATE_FRAME_SIZE; i++) {
|
||||
for (int j = 0; j < 8; j++) {
|
||||
if (data.expect_item(AIRTON_BIT_MARK, AIRTON_ONE_SPACE)) {
|
||||
remote_state[i] |= 1 << j;
|
||||
} else if (!data.expect_item(AIRTON_BIT_MARK, AIRTON_ZERO_SPACE)) {
|
||||
ESP_LOGV(TAG, "Wrong modulation encoding for: Byte %d, bit %d", i, j);
|
||||
return false;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
if (remote_state[0] != AIRTON_HEADER_BYTE0 || remote_state[1] != AIRTON_HEADER_BYTE1) {
|
||||
|
||||
@@ -36,8 +36,8 @@ static constexpr uint32_t AIRTON_IR_FREQUENCY = 38000;
|
||||
static constexpr uint32_t AIRTON_HEADER_MARK = 6630;
|
||||
static constexpr uint32_t AIRTON_HEADER_SPACE = 3350;
|
||||
static constexpr uint32_t AIRTON_BIT_MARK = 400;
|
||||
static constexpr remote_base::BitTimings AIRTON_BIT_TIMINGS{
|
||||
.bit_mark = AIRTON_BIT_MARK, .one_space = 1260, .zero_space = 430};
|
||||
static constexpr uint32_t AIRTON_ONE_SPACE = 1260;
|
||||
static constexpr uint32_t AIRTON_ZERO_SPACE = 430;
|
||||
static constexpr uint32_t AIRTON_MESSAGE_SPACE = 100000;
|
||||
|
||||
static constexpr uint8_t AIRTON_STATE_FRAME_SIZE = 7;
|
||||
|
||||
@@ -8,18 +8,19 @@ from ..climate import CONF_AIRTON_ID, CONF_SLEEP_MODE, AirtonClimate, airton_ns
|
||||
|
||||
CODEOWNERS = ["@Procsiab"]
|
||||
|
||||
AirtonSwitch = airton_ns.class_("AirtonSwitch", switch.Switch)
|
||||
AirtonSetting = airton_ns.enum("AirtonSetting", is_class=True)
|
||||
|
||||
CONFIG_SCHEMA = cv.Schema(
|
||||
{
|
||||
cv.GenerateID(CONF_AIRTON_ID): cv.use_id(AirtonClimate),
|
||||
cv.Optional(CONF_DISPLAY): switch.switch_schema(
|
||||
switch.ApplySwitch,
|
||||
AirtonSwitch,
|
||||
entity_category=ENTITY_CATEGORY_CONFIG,
|
||||
default_restore_mode="DISABLED",
|
||||
),
|
||||
cv.Optional(CONF_SLEEP_MODE): switch.switch_schema(
|
||||
switch.ApplySwitch,
|
||||
AirtonSwitch,
|
||||
entity_category=ENTITY_CATEGORY_CONFIG,
|
||||
default_restore_mode="DISABLED",
|
||||
),
|
||||
@@ -31,12 +32,10 @@ async def to_code(config: ConfigType) -> None:
|
||||
hub = await cg.get_variable(config[CONF_AIRTON_ID])
|
||||
switches = switch.sub_switches(config, parent=hub)
|
||||
await switches(
|
||||
CONF_DISPLAY,
|
||||
hub.set_display_switch,
|
||||
apply=f"set_setting({AirtonSetting.AIRTON_SETTING_DISPLAY}, state)",
|
||||
CONF_DISPLAY, hub.set_display_switch, AirtonSetting.AIRTON_SETTING_DISPLAY
|
||||
)
|
||||
await switches(
|
||||
CONF_SLEEP_MODE,
|
||||
hub.set_sleep_mode_switch,
|
||||
apply=f"set_setting({AirtonSetting.AIRTON_SETTING_SLEEP_MODE}, state)",
|
||||
AirtonSetting.AIRTON_SETTING_SLEEP_MODE,
|
||||
)
|
||||
|
||||
@@ -0,0 +1,19 @@
|
||||
#pragma once
|
||||
|
||||
#include "esphome/components/switch/switch.h"
|
||||
#include "../airton.h"
|
||||
|
||||
namespace esphome::airton {
|
||||
|
||||
// One of the unit's on/off settings; the parent sends the state and publishes it back
|
||||
class AirtonSwitch : public switch_::Switch, public Parented<AirtonClimate> {
|
||||
public:
|
||||
explicit AirtonSwitch(AirtonSetting setting) : setting_(setting) {}
|
||||
|
||||
protected:
|
||||
void write_state(bool state) override { this->parent_->set_setting(this->setting_, state); }
|
||||
|
||||
AirtonSetting setting_;
|
||||
};
|
||||
|
||||
} // namespace esphome::airton
|
||||
@@ -31,7 +31,7 @@ void AlarmControlPanel::publish_state(AlarmControlPanelState state) {
|
||||
this->last_update_ = millis();
|
||||
if (state != this->current_state_) {
|
||||
auto prev_state = this->current_state_;
|
||||
ESP_LOGV(TAG, "'%s' >> %s (was %s)", LOG_STR_ARG(this->get_log_name()),
|
||||
ESP_LOGV(TAG, "'%s' >> %s (was %s)", this->get_name().c_str(),
|
||||
LOG_STR_ARG(alarm_control_panel_state_to_string(state)),
|
||||
LOG_STR_ARG(alarm_control_panel_state_to_string(prev_state)));
|
||||
this->current_state_ = state;
|
||||
|
||||
@@ -30,9 +30,9 @@ void Am43Component::loop() {
|
||||
auto status =
|
||||
esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
|
||||
packet->length, packet->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
|
||||
ESP_LOGI(TAG, "[%s] Logging into AM43", LOG_STR_ARG(this->get_log_name()));
|
||||
ESP_LOGI(TAG, "[%s] Logging into AM43", this->get_name().c_str());
|
||||
if (status) {
|
||||
ESP_LOGW(TAG, "[%s] Error writing set_pin to device, error = %d", LOG_STR_ARG(this->get_log_name()), status);
|
||||
ESP_LOGW(TAG, "[%s] Error writing set_pin to device, error = %d", this->get_name().c_str(), status);
|
||||
} else {
|
||||
this->logged_in_ = true;
|
||||
}
|
||||
@@ -50,7 +50,7 @@ CoverTraits Am43Component::get_traits() {
|
||||
|
||||
void Am43Component::control(const CoverCall &call) {
|
||||
if (this->node_state != espbt::ClientState::ESTABLISHED) {
|
||||
ESP_LOGW(TAG, "[%s] Cannot send cover control, not connected", LOG_STR_ARG(this->get_log_name()));
|
||||
ESP_LOGW(TAG, "[%s] Cannot send cover control, not connected", this->get_name().c_str());
|
||||
return;
|
||||
}
|
||||
if (call.get_stop()) {
|
||||
@@ -59,7 +59,7 @@ void Am43Component::control(const CoverCall &call) {
|
||||
esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
|
||||
packet->length, packet->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
|
||||
if (status) {
|
||||
ESP_LOGW(TAG, "[%s] Error writing stop command to device, error = %d", LOG_STR_ARG(this->get_log_name()), status);
|
||||
ESP_LOGW(TAG, "[%s] Error writing stop command to device, error = %d", this->get_name().c_str(), status);
|
||||
}
|
||||
}
|
||||
auto opt_pos = call.get_position();
|
||||
@@ -73,8 +73,7 @@ void Am43Component::control(const CoverCall &call) {
|
||||
esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
|
||||
packet->length, packet->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
|
||||
if (status) {
|
||||
ESP_LOGW(TAG, "[%s] Error writing set_position command to device, error = %d", LOG_STR_ARG(this->get_log_name()),
|
||||
status);
|
||||
ESP_LOGW(TAG, "[%s] Error writing set_position command to device, error = %d", this->get_name().c_str(), status);
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -90,9 +89,9 @@ void Am43Component::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
|
||||
auto *chr = this->parent_->get_characteristic(AM43_SERVICE_UUID, AM43_CHARACTERISTIC_UUID);
|
||||
if (chr == nullptr) {
|
||||
if (this->parent_->get_characteristic(AM43_TUYA_SERVICE_UUID, AM43_TUYA_CHARACTERISTIC_UUID) != nullptr) {
|
||||
ESP_LOGE(TAG, "[%s] Detected a Tuya AM43 which is not supported, sorry.", LOG_STR_ARG(this->get_log_name()));
|
||||
ESP_LOGE(TAG, "[%s] Detected a Tuya AM43 which is not supported, sorry.", this->get_name().c_str());
|
||||
} else {
|
||||
ESP_LOGE(TAG, "[%s] No control service found at device, not an AM43..?", LOG_STR_ARG(this->get_log_name()));
|
||||
ESP_LOGE(TAG, "[%s] No control service found at device, not an AM43..?", this->get_name().c_str());
|
||||
}
|
||||
break;
|
||||
}
|
||||
@@ -101,8 +100,7 @@ void Am43Component::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
|
||||
auto status = esp_ble_gattc_register_for_notify(this->parent_->get_gattc_if(), this->parent_->get_remote_bda(),
|
||||
chr->handle);
|
||||
if (status) {
|
||||
ESP_LOGW(TAG, "[%s] esp_ble_gattc_register_for_notify failed, status=%d", LOG_STR_ARG(this->get_log_name()),
|
||||
status);
|
||||
ESP_LOGW(TAG, "[%s] esp_ble_gattc_register_for_notify failed, status=%d", this->get_name().c_str(), status);
|
||||
}
|
||||
break;
|
||||
}
|
||||
@@ -128,26 +126,25 @@ void Am43Component::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
|
||||
|
||||
if (this->decoder_->has_pin_response()) {
|
||||
if (this->decoder_->pin_ok_) {
|
||||
ESP_LOGI(TAG, "[%s] AM43 pin accepted.", LOG_STR_ARG(this->get_log_name()));
|
||||
ESP_LOGI(TAG, "[%s] AM43 pin accepted.", this->get_name().c_str());
|
||||
auto *packet = this->encoder_->get_position_request();
|
||||
auto status = esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(),
|
||||
this->char_handle_, packet->length, packet->data,
|
||||
ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
|
||||
if (status) {
|
||||
ESP_LOGW(TAG, "[%s] Error writing set_position to device, error = %d", LOG_STR_ARG(this->get_log_name()),
|
||||
status);
|
||||
ESP_LOGW(TAG, "[%s] Error writing set_position to device, error = %d", this->get_name().c_str(), status);
|
||||
}
|
||||
} else {
|
||||
ESP_LOGW(TAG, "[%s] AM43 pin rejected!", LOG_STR_ARG(this->get_log_name()));
|
||||
ESP_LOGW(TAG, "[%s] AM43 pin rejected!", this->get_name().c_str());
|
||||
}
|
||||
}
|
||||
|
||||
if (this->decoder_->has_set_position_response() && !this->decoder_->set_position_ok_) {
|
||||
ESP_LOGW(TAG, "[%s] Got nack after sending set_position. Bad pin?", LOG_STR_ARG(this->get_log_name()));
|
||||
ESP_LOGW(TAG, "[%s] Got nack after sending set_position. Bad pin?", this->get_name().c_str());
|
||||
}
|
||||
|
||||
if (this->decoder_->has_set_state_response() && !this->decoder_->set_state_ok_) {
|
||||
ESP_LOGW(TAG, "[%s] Got nack after sending set_state. Bad pin?", LOG_STR_ARG(this->get_log_name()));
|
||||
ESP_LOGW(TAG, "[%s] Got nack after sending set_state. Bad pin?", this->get_name().c_str());
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
@@ -67,9 +67,8 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
|
||||
case ESP_GATTC_SEARCH_CMPL_EVT: {
|
||||
auto *chr = this->parent_->get_characteristic(ANOVA_SERVICE_UUID, ANOVA_CHARACTERISTIC_UUID);
|
||||
if (chr == nullptr) {
|
||||
ESP_LOGW(TAG, "[%s] No control service found at device, not an Anova..?", LOG_STR_ARG(this->get_log_name()));
|
||||
ESP_LOGW(TAG, "[%s] Note, this component does not currently support Anova Nano.",
|
||||
LOG_STR_ARG(this->get_log_name()));
|
||||
ESP_LOGW(TAG, "[%s] No control service found at device, not an Anova..?", this->get_name().c_str());
|
||||
ESP_LOGW(TAG, "[%s] Note, this component does not currently support Anova Nano.", this->get_name().c_str());
|
||||
break;
|
||||
}
|
||||
this->char_handle_ = chr->handle;
|
||||
@@ -77,8 +76,7 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
|
||||
auto status = esp_ble_gattc_register_for_notify(this->parent_->get_gattc_if(), this->parent_->get_remote_bda(),
|
||||
chr->handle);
|
||||
if (status) {
|
||||
ESP_LOGW(TAG, "[%s] esp_ble_gattc_register_for_notify failed, status=%d", LOG_STR_ARG(this->get_log_name()),
|
||||
status);
|
||||
ESP_LOGW(TAG, "[%s] esp_ble_gattc_register_for_notify failed, status=%d", this->get_name().c_str(), status);
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
@@ -2,7 +2,7 @@ from esphome import automation, pins
|
||||
from esphome.automation import maybe_simple_id
|
||||
import esphome.codegen as cg
|
||||
from esphome.components import sensor, uart
|
||||
from esphome.components.const import CONF_AQI, CONF_ERROR_CODE
|
||||
from esphome.components.const import CONF_AQI
|
||||
import esphome.config_validation as cv
|
||||
from esphome.const import (
|
||||
CONF_ECO2,
|
||||
@@ -55,6 +55,7 @@ CONF_RAW_HUMIDITY = "raw_humidity"
|
||||
CONF_RS0 = "rs0"
|
||||
CONF_RS2 = "rs2"
|
||||
CONF_RS3 = "rs3"
|
||||
CONF_ERROR_CODE = "error_code"
|
||||
|
||||
apc1_ns = cg.esphome_ns.namespace("apc1")
|
||||
APC1Component = apc1_ns.class_("APC1Component", uart.UARTDevice, cg.Component)
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user