Merge remote-tracking branch 'origin/dev' into HEAD

CODEOWNERS

@@ -741,7 +741,7 @@ esphome/components/web_server_idf/* @dentra
 esphome/components/weikai/* @DrCoolZic
 esphome/components/weikai_i2c/* @DrCoolZic
 esphome/components/weikai_spi/* @DrCoolZic
-esphome/components/whirlpool/* @arpena @glmnet @Rodrigoah
+esphome/components/whirlpool/* @arpena @glmnet
 esphome/components/whynter/* @aeonsablaze
 esphome/components/wiegand/* @ssieb
 esphome/components/wireguard/* @droscy @lhoracek @thomas0bernard

esphome/automation.py

@@ -1,6 +1,7 @@
 from collections.abc import Awaitable, Callable, Sequence
 from contextvars import ContextVar
 from dataclasses import dataclass, field
+from functools import partial
 import logging
 import math
 import re
@@ -1151,9 +1152,6 @@ IfAction = cg.esphome_ns.class_("IfAction", Action)
 WhileAction = cg.esphome_ns.class_("WhileAction", Action)
 RepeatAction = cg.esphome_ns.class_("RepeatAction", Action)
 WaitUntilAction = cg.esphome_ns.class_("WaitUntilAction", Action, cg.Component)
-UpdateComponentAction = cg.esphome_ns.class_("UpdateComponentAction", Action)
-SuspendComponentAction = cg.esphome_ns.class_("SuspendComponentAction", Action)
-ResumeComponentAction = cg.esphome_ns.class_("ResumeComponentAction", Action)
 Automation = cg.esphome_ns.class_("Automation")
 TriggerForwarder = cg.esphome_ns.class_("TriggerForwarder")
 TriggerOnTrueForwarder = cg.esphome_ns.class_("TriggerOnTrueForwarder")
@@ -1771,25 +1769,44 @@ async def lambda_action_to_code(
     return new_lambda_pvariable(action_id, lambda_, StatelessLambdaAction, template_arg)
 
 
-register_simple_action(
-    "component.update",
-    UpdateComponentAction,
-    maybe_simple_id({cv.Required(CONF_ID): cv.use_id(cg.PollingComponent)}),
-    synchronous=True,
+_POLLING_COMPONENT_SCHEMA = maybe_simple_id(
+    {cv.Required(CONF_ID): cv.use_id(cg.PollingComponent)}
 )
 
 
-register_simple_action(
-    "component.suspend",
-    SuspendComponentAction,
-    maybe_simple_id({cv.Required(CONF_ID): cv.use_id(cg.PollingComponent)}),
-    synchronous=True,
-)
+async def _polling_component_action(
+    config: ConfigType,
+    action_id: ID,
+    template_arg: cg.TemplateArguments,
+    args: TemplateArgsType,
+    calls: list[str],
+) -> MockObj:
+    """Run ``calls`` on the component once it is ready, through ``PollingComponent``.
+
+    An if block, not an early return, so actions merged after this one still run.
+    """
+    parent = await _apply_parent(config)
+    statements = [
+        f"{cg.PollingComponent} &esphome__component = *{parent};",
+        "if (esphome__component.is_ready()) {",
+        *(f"  esphome__component.{call};" for call in calls),
+        "}",
+    ]
+    return apply_statements_action(action_id, template_arg, args, statements)
+
+
+for _name, _call in (
+    ("component.update", "update()"),
+    ("component.suspend", "stop_poller()"),
+):
+    register_action(_name, ApplyAction, _POLLING_COMPONENT_SCHEMA, synchronous=True)(
+        partial(_polling_component_action, calls=[_call])
+    )
 
 
 @register_action(
     "component.resume",
-    ResumeComponentAction,
+    ApplyAction,
     maybe_simple_id(
         {
             cv.Required(CONF_ID): cv.use_id(cg.PollingComponent),
@@ -1806,12 +1823,16 @@ async def component_resume_action_to_code(
     template_arg: cg.TemplateArguments,
     args: TemplateArgsType,
 ) -> MockObj:
-    comp = await cg.get_variable(config[CONF_ID])
-    var = cg.new_Pvariable(action_id, template_arg, comp)
-    if CONF_UPDATE_INTERVAL in config:
-        template_ = await cg.templatable(config[CONF_UPDATE_INTERVAL], args, cg.uint32)
-        cg.add(var.set_update_interval(template_))
-    return var
+    calls: list[str] = []
+    if (interval := config.get(CONF_UPDATE_INTERVAL)) is not None:
+        if isinstance(interval, Lambda):
+            # Built with the trigger's own argument types and always called, so the body
+            # may modify its by-value arguments
+            lamb = await cg.process_lambda(interval, args, return_type=cg.uint32)
+            interval = CallExpression(lamb, *(MockObj(name) for _, name in args))
+        calls.append(f"set_update_interval({cg.safe_exp(interval)})")
+    calls.append("start_poller()")
+    return await _polling_component_action(config, action_id, template_arg, args, calls)
 
 
 async def build_action(

esphome/components/climate_ir/climate_ir.cpp

@@ -95,19 +95,4 @@ void ClimateIR::dump_config() {
                 YESNO(this->modes_.count(climate::CLIMATE_MODE_HEAT_COOL)));
 }
 
-int find_ir_code_index(const IRCode *table, size_t count, uint8_t key, bool match_code) {
-  for (size_t i = 0; i < count; i++) {
-    if (progmem_read_byte(match_code ? &table[i].code : &table[i].value) == key)
-      return static_cast<int>(i);
-  }
-  return -1;
-}
-
-uint8_t lookup_ir_code(const IRCode *table, size_t count, uint8_t key, bool match_code, uint8_t fallback) {
-  const int index = find_ir_code_index(table, count, key, match_code);
-  if (index < 0)
-    return fallback;
-  return progmem_read_byte(match_code ? &table[index].value : &table[index].code);
-}
-
 }  // namespace esphome::climate_ir

esphome/components/climate_ir/climate_ir.h

@@ -6,42 +6,9 @@
 #include "esphome/components/remote_base/remote_base.h"
 #include "esphome/components/remote_transmitter/remote_transmitter.h"
 #include "esphome/components/sensor/sensor.h"
-#include "esphome/core/hal.h"
-#include "esphome/core/optional.h"
 
 namespace esphome::climate_ir {
 
-/// One entry of a PROGMEM table that maps a climate enum value to the unit's code.
-struct IRCode {
-  uint8_t value;  // a climate enum; they are all uint8_t
-  uint8_t code;
-};
-
-/// Index of the entry whose value (or, with match_code, code) is key, or -1. Reads the table from PROGMEM.
-int find_ir_code_index(const IRCode *table, size_t count, uint8_t key, bool match_code);
-
-/// The entry whose value (or, with match_code, code) is key, read from PROGMEM.
-template<size_t N>
-ESPHOME_ALWAYS_INLINE optional<IRCode> find_ir_code(const IRCode (&table)[N], uint8_t key, bool match_code) {
-  const int index = find_ir_code_index(table, N, key, match_code);
-  if (index < 0)
-    return {};
-  return IRCode{progmem_read_byte(&table[index].value), progmem_read_byte(&table[index].code)};
-}
-
-/// The code for value (or, with match_code, the value for code), or fallback when the table has no such entry.
-uint8_t lookup_ir_code(const IRCode *table, size_t count, uint8_t key, bool match_code, uint8_t fallback);
-
-/// The code for value, or fallback when the table has no such value.
-template<size_t N> uint8_t to_ir_code(const IRCode (&table)[N], uint8_t value, uint8_t fallback) {
-  return lookup_ir_code(table, N, value, false, fallback);
-}
-/// The value for code, or fallback when the table has no such code; pass the current state to keep it.
-template<typename T, size_t N> T from_ir_code(const IRCode (&table)[N], uint8_t code, T fallback) {
-  static_assert(sizeof(T) == sizeof(uint8_t), "IRCode values are one byte");
-  return static_cast<T>(lookup_ir_code(table, N, code, true, static_cast<uint8_t>(fallback)));
-}
-
 /* A base for climate which works by sending (and receiving) IR codes
 
     To send IR codes implement

esphome/components/ethernet/ethernet_component.h

@@ -7,8 +7,6 @@
 #include "esphome/core/automation.h"
 #include "esphome/components/network/ip_address.h"
 
-#include <atomic>
-
 #ifdef USE_ETHERNET
 
 #ifdef USE_ESP32
@@ -368,9 +366,6 @@ class EthernetComponent final : public Component {
 
 #ifdef USE_ETHERNET_IP_STATE_LISTENERS
   StaticVector<EthernetIPStateListener *, ESPHOME_ETHERNET_IP_STATE_LISTENERS> ip_state_listeners_;
-#ifdef USE_ESP32
-  std::atomic<uint8_t> ip_state_pending_{0};
-#endif
 #endif
 
 #ifdef USE_ETHERNET_CONNECT_TRIGGER

esphome/components/ethernet/ethernet_component_esp32.cpp

@@ -129,14 +129,6 @@ void EthernetComponent::log_error_and_mark_failed_(esp_err_t err, const char *me
 void EthernetComponent::loop() {
   const uint32_t now = App.get_loop_component_start_time();
 
-#ifdef USE_ETHERNET_IP_STATE_LISTENERS
-  // The IP events arrive on the event task; the listeners publish states, so notify them here
-  if (this->ip_state_pending_.load(std::memory_order_acquire) != 0) {
-    this->ip_state_pending_.store(0, std::memory_order_relaxed);
-    this->notify_ip_state_listeners_();
-  }
-#endif
-
   switch (this->state_) {
     case EthernetComponentState::STOPPED:
       if (this->started_) {
@@ -778,8 +770,7 @@ void EthernetComponent::eth_event_handler(void *arg, esp_event_base_t event_base
       event_name = "ETH connected";
       // For static IP configurations, GOT_IP event may not fire, so notify IP listeners here
 #if defined(USE_ETHERNET_IP_STATE_LISTENERS) && defined(USE_ETHERNET_MANUAL_IP)
-      global_eth_component->ip_state_pending_.store(1, std::memory_order_release);
-      global_eth_component->enable_loop_soon_any_context();
+      global_eth_component->notify_ip_state_listeners_();
 #endif
 #if USE_NETWORK_IPV6
       // Start SLAAC on link-up, not after the DHCPv4 lease. This also restores the
@@ -807,9 +798,6 @@ void EthernetComponent::got_ip_event_handler(void *arg, esp_event_base_t event_b
   const esp_netif_ip_info_t *ip_info = &event->ip_info;
   ESP_LOGV(TAG, "[Ethernet event] ETH Got IP " IPSTR, IP2STR(&ip_info->ip));
   global_eth_component->got_ipv4_address_ = true;
-#ifdef USE_ETHERNET_IP_STATE_LISTENERS
-  global_eth_component->ip_state_pending_.store(1, std::memory_order_release);
-#endif
 #if USE_NETWORK_IPV6 && (USE_NETWORK_MIN_IPV6_ADDR_COUNT > 0)
   global_eth_component->connected_ = global_eth_component->ipv6_count_ >= USE_NETWORK_MIN_IPV6_ADDR_COUNT;
   global_eth_component->enable_loop_soon_any_context();  // Enable loop when connection state changes
@@ -817,6 +805,9 @@ void EthernetComponent::got_ip_event_handler(void *arg, esp_event_base_t event_b
   global_eth_component->connected_ = true;
   global_eth_component->enable_loop_soon_any_context();  // Enable loop when connection state changes
 #endif /* USE_NETWORK_IPV6 */
+#ifdef USE_ETHERNET_IP_STATE_LISTENERS
+  global_eth_component->notify_ip_state_listeners_();
+#endif
 }
 
 #if USE_NETWORK_IPV6
@@ -828,9 +819,6 @@ void EthernetComponent::got_ip6_event_handler(void *arg, esp_event_base_t event_
   // after a link flap fires another event for the same address.
   struct esp_ip6_addr if_ip6s[CONFIG_LWIP_IPV6_NUM_ADDRESSES];
   global_eth_component->ipv6_count_ = esp_netif_get_all_ip6(global_eth_component->eth_netif_, if_ip6s);
-#ifdef USE_ETHERNET_IP_STATE_LISTENERS
-  global_eth_component->ip_state_pending_.store(1, std::memory_order_release);
-#endif
 #if (USE_NETWORK_MIN_IPV6_ADDR_COUNT > 0)
   global_eth_component->connected_ =
       global_eth_component->got_ipv4_address_ && (global_eth_component->ipv6_count_ >= USE_NETWORK_MIN_IPV6_ADDR_COUNT);
@@ -839,6 +827,9 @@ void EthernetComponent::got_ip6_event_handler(void *arg, esp_event_base_t event_
   global_eth_component->connected_ = global_eth_component->got_ipv4_address_;
   global_eth_component->enable_loop_soon_any_context();  // Enable loop when connection state changes
 #endif
+#ifdef USE_ETHERNET_IP_STATE_LISTENERS
+  global_eth_component->notify_ip_state_listeners_();
+#endif
 }
 #endif /* USE_NETWORK_IPV6 */
 

esphome/components/friedrich/friedrich.cpp

@@ -50,25 +50,34 @@ static constexpr uint8_t STATE_TEMPLATE[STATE_MESSAGE_LENGTH] PROGMEM = {
 static constexpr uint8_t OFF_FRAME[STATE_MESSAGE_LENGTH_UTIL] PROGMEM = {0x00, 0x08, 0x08, BYTE3_POWER_OFF,
                                                                          255 - BYTE3_POWER_OFF};
 
-using climate_ir::find_ir_code;
-using climate_ir::from_ir_code;
-using climate_ir::IRCode;
-using climate_ir::to_ir_code;
-
-// A received mode that is not listed is ignored
-static constexpr IRCode MODES[] PROGMEM = {
+struct Code {
+  uint8_t value;  // a climate enum, all of which are uint8_t
+  uint8_t code;
+};
+static constexpr Code MODES[] PROGMEM = {
     {climate::CLIMATE_MODE_HEAT_COOL, BYTE7_MODE_AUTO},
     {climate::CLIMATE_MODE_COOL, 0x80},
     {climate::CLIMATE_MODE_DRY, 0x40},
     {climate::CLIMATE_MODE_FAN_ONLY, 0xC0},
     {climate::CLIMATE_MODE_HEAT, 0x20},
 };
-static constexpr IRCode FANS[] PROGMEM = {
+static constexpr Code FANS[] PROGMEM = {
     {climate::CLIMATE_FAN_AUTO, BYTE8_FAN_AUTO}, {climate::CLIMATE_FAN_HIGH, 0x80},
     {climate::CLIMATE_FAN_MEDIUM, 0x40},         {climate::CLIMATE_FAN_LOW, 0xC0},
     {climate::CLIMATE_FAN_QUIET, 0x20},
 };
 
+// The entry whose value (or code) matches key. Entries are copied out of PROGMEM.
+template<size_t N> static optional<Code> find_entry(const Code (&table)[N], uint8_t key, bool match_code) {
+  for (const Code &slot : table) {
+    Code entry;
+    progmem_memcpy(&entry, &slot, sizeof(entry));
+    if ((match_code ? entry.code : entry.value) == key)
+      return entry;
+  }
+  return {};
+}
+
 // The temperature code is the 4-bit reversal of (F - TEMP_MIN) / TEMP_STEP; the mapping is its own inverse.
 static uint8_t reverse_nibble(uint8_t value) { return reverse_bits(value) >> 4; }
 
@@ -142,11 +151,14 @@ void FriedrichClimate::transmit_state() {
   temperature += temperature % 2;
   this->target_temperature = temperature;
 
+  const auto mode = find_entry(MODES, this->mode, false);
+  const auto fan = find_entry(FANS, this->fan_mode.value_or(climate::CLIMATE_FAN_AUTO), false);
+
   uint8_t frame[STATE_MESSAGE_LENGTH];
   progmem_memcpy(frame, STATE_TEMPLATE, sizeof(frame));
   frame[6] |= reverse_nibble((temperature - TEMP_MIN) / TEMP_STEP);
-  frame[7] = to_ir_code(MODES, this->mode, BYTE7_MODE_AUTO);
-  frame[8] = to_ir_code(FANS, this->fan_mode.value_or(climate::CLIMATE_FAN_AUTO), BYTE8_FAN_AUTO);
+  frame[7] = mode.has_value() ? mode->code : BYTE7_MODE_AUTO;
+  frame[8] = fan.has_value() ? fan->code : BYTE8_FAN_AUTO;
   if (this->swing_mode != climate::CLIMATE_SWING_OFF)
     frame[8] |= BYTE8_FAN_SWING;
   frame[STATE_MESSAGE_LENGTH - 1] = checksum_state(frame);
@@ -197,7 +209,7 @@ bool FriedrichClimate::on_receive(remote_base::RemoteReceiveData src) {
     return false;
 
   // Ignore frames with a mode this component does not expose (e.g. MIN_HEAT, COIL_DRY)
-  const auto mode = find_ir_code(MODES, d[7], true);
+  const auto mode = find_entry(MODES, d[7], true);
   if (!mode.has_value()) {
     ESP_LOGV(TAG, "Ignoring unknown mode 0x%02X", d[7]);
     return false;
@@ -212,7 +224,8 @@ bool FriedrichClimate::on_receive(remote_base::RemoteReceiveData src) {
     this->target_temperature = TEMP_MIN + temp_index * TEMP_STEP;
 
   this->swing_mode = (d[8] & BYTE8_FAN_SWING) ? climate::CLIMATE_SWING_VERTICAL : climate::CLIMATE_SWING_OFF;
-  this->fan_mode = from_ir_code(FANS, d[8] & ~BYTE8_FAN_SWING, climate::CLIMATE_FAN_AUTO);
+  const auto fan = find_entry(FANS, d[8] & ~BYTE8_FAN_SWING, true);
+  this->fan_mode = fan.has_value() ? static_cast<climate::ClimateFanMode>(fan->value) : climate::CLIMATE_FAN_AUTO;
 
   this->publish_state();
   return true;

esphome/components/mistral_ir/mistral_ir.cpp

@@ -21,16 +21,19 @@ constexpr uint8_t MISTRAL_POWER_ON = 0x20;
 constexpr uint8_t MISTRAL_TEMP_OFFSET = 0x9F;
 constexpr uint8_t MISTRAL_MODE_AUTO = 0x10;
 
-// OFF sends the auto mode code and only clears the power byte
-static constexpr climate_ir::IRCode MODES[] PROGMEM = {
-    {climate::CLIMATE_MODE_HEAT_COOL, MISTRAL_MODE_AUTO},
+// The tables live in flash, so entries are copied out before use
+struct ModeCode {
+  climate::ClimateMode mode;
+  uint8_t code;
+};
+static const ModeCode MODES[] PROGMEM = {
     {climate::CLIMATE_MODE_COOL, 0xC0},
     {climate::CLIMATE_MODE_DRY, 0x40},
     {climate::CLIMATE_MODE_FAN_ONLY, 0x80},
     {climate::CLIMATE_MODE_HEAT, 0x60},
+    {climate::CLIMATE_MODE_HEAT_COOL, MISTRAL_MODE_AUTO},
 };
 
-// Each fan speed sets two bytes; the table lives in flash, so entries are copied out before use
 struct FanCode {
   climate::ClimateFanMode fan;
   uint8_t byte1;
@@ -75,6 +78,7 @@ static bool is_valid_frame(const uint8_t *frame) {
 }
 
 void MistralIR::transmit_state() {
+  const auto mode = find_entry(MODES, [this](const ModeCode &m) { return m.mode == this->mode; });
   const climate::ClimateFanMode fan_mode = this->fan_mode.value_or(climate::CLIMATE_FAN_AUTO);
   const FanCode fan =
       find_entry(FANS, [fan_mode](const FanCode &f) { return f.fan == fan_mode; }).value_or(load_entry(FANS[0]));
@@ -84,7 +88,7 @@ void MistralIR::transmit_state() {
   progmem_memcpy(frame, FRAME_TEMPLATE, sizeof(frame));
   frame[1] = fan.byte1;
   frame[3] = this->mode == climate::CLIMATE_MODE_OFF ? MISTRAL_POWER_OFF : MISTRAL_POWER_ON;
-  frame[4] = climate_ir::to_ir_code(MODES, this->mode, MISTRAL_MODE_AUTO);
+  frame[4] = mode.has_value() ? mode->code : MISTRAL_MODE_AUTO;
   frame[5] = reverse_bits(static_cast<uint8_t>(MISTRAL_TEMP_OFFSET - temp));
   frame[6] = fan.byte6;
   frame[11] = compute_checksum(frame);
@@ -112,12 +116,12 @@ bool MistralIR::on_receive(remote_base::RemoteReceiveData data) {
     return false;
 
   // Decode everything before touching the state so an unknown code leaves it untouched
-  const auto mode = climate_ir::find_ir_code(MODES, frame[4], true);
+  const auto mode = find_entry(MODES, [frame](const ModeCode &m) { return m.code == frame[4]; });
   const auto fan = find_entry(FANS, [frame](const FanCode &f) { return f.byte1 == frame[1] && f.byte6 == frame[6]; });
   if (!mode.has_value() || !fan.has_value())
     return false;
 
-  this->mode = static_cast<climate::ClimateMode>(mode->value);
+  this->mode = mode->mode;
   this->target_temperature =
       clamp<float>(MISTRAL_TEMP_OFFSET - reverse_bits(frame[5]), MISTRAL_TEMP_MIN, MISTRAL_TEMP_MAX);
   this->fan_mode = fan->fan;

esphome/components/samsung/samsung.cpp

@@ -47,28 +47,46 @@ static bool is_powered_on(const uint8_t *state) {
   return get_field(state, POWER_1) == POWER_ON && get_field(state, POWER_2) == POWER_ON;
 }
 
-using climate_ir::from_ir_code;
-using climate_ir::IRCode;
-using climate_ir::to_ir_code;
-
-// Codes not listed fall back to auto (mode and fan) and to swing off
-static constexpr IRCode MODES[] PROGMEM = {
+struct Code {
+  uint8_t value;  // a climate enum, all of which are uint8_t
+  uint8_t code;
+};
+// The first entry of each table is the fallback in both directions
+static constexpr Code MODES[] PROGMEM = {
     {climate::CLIMATE_MODE_HEAT_COOL, 0}, {climate::CLIMATE_MODE_COOL, 1}, {climate::CLIMATE_MODE_DRY, 2},
     {climate::CLIMATE_MODE_FAN_ONLY, 3},  {climate::CLIMATE_MODE_HEAT, 4},
 };
-static constexpr IRCode FANS[] PROGMEM = {
+static constexpr Code FANS[] PROGMEM = {
     {climate::CLIMATE_FAN_AUTO, 0},
     {climate::CLIMATE_FAN_LOW, 2},
     {climate::CLIMATE_FAN_MEDIUM, 4},
     {climate::CLIMATE_FAN_HIGH, 5},
 };
-static constexpr IRCode SWINGS[] PROGMEM = {
+static constexpr Code SWINGS[] PROGMEM = {
     {climate::CLIMATE_SWING_OFF, 0b111},
     {climate::CLIMATE_SWING_VERTICAL, 0b010},
     {climate::CLIMATE_SWING_HORIZONTAL, 0b011},
     {climate::CLIMATE_SWING_BOTH, 0b100},
 };
 
+// Returns the entry whose value (or code) matches key, else the first entry. Entries are copied out of PROGMEM.
+static Code find_entry(const Code *table, size_t count, uint8_t key, bool match_code) {
+  Code entry{};
+  for (size_t i = 0; i < count; i++) {
+    progmem_memcpy(&entry, &table[i], sizeof(entry));
+    if ((match_code ? entry.code : entry.value) == key)
+      return entry;
+  }
+  progmem_memcpy(&entry, table, sizeof(entry));
+  return entry;
+}
+template<size_t N> static uint8_t to_code(const Code (&table)[N], uint8_t value) {
+  return find_entry(table, N, value, false).code;
+}
+template<typename T, size_t N> static T from_code(const Code (&table)[N], uint8_t code) {
+  return static_cast<T>(find_entry(table, N, code, true).value);
+}
+
 // Inverted count of the one bits in a section, skipping the two nibbles that hold the checksum itself.
 // See https://github.com/crankyoldgit/IRremoteESP8266/issues/1538#issuecomment-894645947
 static uint8_t section_checksum(const uint8_t *section) {
@@ -105,13 +123,13 @@ void SamsungClimate::transmit_state() {
 
   if (on) {
     progmem_memcpy(state, RESET_STATE, SAMSUNG_AC_STATE_LENGTH);
-    set_field(state, MODE, to_ir_code(MODES, this->mode, 0));
+    set_field(state, MODE, to_code(MODES, this->mode));
   }  // else keep the last mode so the power off frame still carries a valid state
 
   const uint8_t temp = clamp<uint8_t>(this->target_temperature, SAMSUNG_AC_TEMP_MIN, SAMSUNG_AC_TEMP_MAX);
   set_field(state, TEMP, temp - SAMSUNG_AC_TEMP_MIN);
-  set_field(state, SWING, to_ir_code(SWINGS, this->swing_mode, 0b111));
-  set_field(state, FAN, to_ir_code(FANS, this->fan_mode.value_or(climate::CLIMATE_FAN_AUTO), 0));
+  set_field(state, SWING, to_code(SWINGS, this->swing_mode));
+  set_field(state, FAN, to_code(FANS, this->fan_mode.value_or(climate::CLIMATE_FAN_AUTO)));
   set_field(state, POWER_1, on ? POWER_ON : 0);
   set_field(state, POWER_2, on ? POWER_ON : 0);
 
@@ -194,11 +212,11 @@ bool SamsungClimate::on_receive(remote_base::RemoteReceiveData data) {
   memcpy(state, frame, SAMSUNG_AC_SECTION_LENGTH);
   memcpy(state + SAMSUNG_AC_SECTION_LENGTH, frame + length - SAMSUNG_AC_SECTION_LENGTH, SAMSUNG_AC_SECTION_LENGTH);
 
-  this->swing_mode = from_ir_code(SWINGS, get_field(state, SWING), climate::CLIMATE_SWING_OFF);
+  this->swing_mode = from_code<climate::ClimateSwingMode>(SWINGS, get_field(state, SWING));
   this->target_temperature = get_field(state, TEMP) + SAMSUNG_AC_TEMP_MIN;
-  this->fan_mode = from_ir_code(FANS, get_field(state, FAN), climate::CLIMATE_FAN_AUTO);
-  this->mode = is_powered_on(state) ? from_ir_code(MODES, get_field(state, MODE), climate::CLIMATE_MODE_HEAT_COOL)
-                                    : climate::CLIMATE_MODE_OFF;
+  this->fan_mode = from_code<climate::ClimateFanMode>(FANS, get_field(state, FAN));
+  this->mode =
+      is_powered_on(state) ? from_code<climate::ClimateMode>(MODES, get_field(state, MODE)) : climate::CLIMATE_MODE_OFF;
 
   ESP_LOGD(TAG, "Received %u byte frame, power %s", length, ONOFF(is_powered_on(state)));
   this->publish_state();

esphome/components/siemens_ira211/siemens_ira211.cpp

@@ -6,32 +6,70 @@ namespace esphome::siemens_ira211 {
 
 using namespace remote_base;
 
-// Presets map to IRA211Mode and fan modes to IRA211Fan. Values the other side does not know fall back to comfort
-// and auto.
-static constexpr climate_ir::IRCode PRESETS[] PROGMEM = {
-    {climate::CLIMATE_PRESET_COMFORT, static_cast<uint8_t>(IRA211Mode::IRA211_MODE_COMFORT)},
-    {climate::CLIMATE_PRESET_ECO, static_cast<uint8_t>(IRA211Mode::IRA211_MODE_TIMER)},
-};
-static constexpr climate_ir::IRCode FANS[] PROGMEM = {
-    {climate::CLIMATE_FAN_AUTO, static_cast<uint8_t>(IRA211Fan::IRA211_FAN_AUTO)},
-    {climate::CLIMATE_FAN_LOW, static_cast<uint8_t>(IRA211Fan::IRA211_FAN_LOW)},
-    {climate::CLIMATE_FAN_MEDIUM, static_cast<uint8_t>(IRA211Fan::IRA211_FAN_MEDIUM)},
-    {climate::CLIMATE_FAN_HIGH, static_cast<uint8_t>(IRA211Fan::IRA211_FAN_HIGH)},
+struct PresetMapping {
+  climate::ClimatePreset preset;
+  IRA211Mode mode;
 };
 
+static const PresetMapping PRESETS[] PROGMEM = {
+    {climate::CLIMATE_PRESET_COMFORT, IRA211Mode::IRA211_MODE_COMFORT},
+    {climate::CLIMATE_PRESET_ECO, IRA211Mode::IRA211_MODE_TIMER},
+};
+
+struct FanMapping {
+  climate::ClimateFanMode fan_mode;
+  IRA211Fan fan;
+};
+
+static const FanMapping FANS[] PROGMEM = {
+    {climate::CLIMATE_FAN_AUTO, IRA211Fan::IRA211_FAN_AUTO},
+    {climate::CLIMATE_FAN_LOW, IRA211Fan::IRA211_FAN_LOW},
+    {climate::CLIMATE_FAN_MEDIUM, IRA211Fan::IRA211_FAN_MEDIUM},
+    {climate::CLIMATE_FAN_HIGH, IRA211Fan::IRA211_FAN_HIGH},
+};
+
+// The tables live in flash, so entries are copied out before use
+template<typename T> static T load_entry(const T &slot) {
+  T entry;
+  progmem_memcpy(&entry, &slot, sizeof(T));
+  return entry;
+}
+
+// The first entry of each table is the fallback for values the other side does not know
 static IRA211Mode to_ira211_mode(climate::ClimatePreset preset) {
-  return static_cast<IRA211Mode>(
-      climate_ir::to_ir_code(PRESETS, preset, static_cast<uint8_t>(IRA211Mode::IRA211_MODE_COMFORT)));
+  for (const auto &slot : PRESETS) {
+    const auto entry = load_entry(slot);
+    if (entry.preset == preset)
+      return entry.mode;
+  }
+  return load_entry(PRESETS[0]).mode;
 }
+
 static climate::ClimatePreset to_climate_preset(IRA211Mode mode) {
-  return climate_ir::from_ir_code(PRESETS, static_cast<uint8_t>(mode), climate::CLIMATE_PRESET_COMFORT);
+  for (const auto &slot : PRESETS) {
+    const auto entry = load_entry(slot);
+    if (entry.mode == mode)
+      return entry.preset;
+  }
+  return load_entry(PRESETS[0]).preset;
 }
+
 static IRA211Fan to_ira211_fan(climate::ClimateFanMode fan_mode) {
-  return static_cast<IRA211Fan>(
-      climate_ir::to_ir_code(FANS, fan_mode, static_cast<uint8_t>(IRA211Fan::IRA211_FAN_AUTO)));
+  for (const auto &slot : FANS) {
+    const auto entry = load_entry(slot);
+    if (entry.fan_mode == fan_mode)
+      return entry.fan;
+  }
+  return load_entry(FANS[0]).fan;
 }
+
 static climate::ClimateFanMode to_climate_fan_mode(IRA211Fan fan) {
-  return climate_ir::from_ir_code(FANS, static_cast<uint8_t>(fan), climate::CLIMATE_FAN_AUTO);
+  for (const auto &slot : FANS) {
+    const auto entry = load_entry(slot);
+    if (entry.fan == fan)
+      return entry.fan_mode;
+  }
+  return load_entry(FANS[0]).fan_mode;
 }
 
 void SiemensIRA211Climate::setup() {

esphome/components/whirlpool/climate.py

@@ -5,15 +5,13 @@ from esphome.const import CONF_MODEL
 from esphome.types import ConfigType
 
 AUTO_LOAD = ["climate_ir"]
-CODEOWNERS = ["@glmnet", "@arpena", "@Rodrigoah"]
+CODEOWNERS = ["@glmnet", "@arpena"]
 
 whirlpool_ns = cg.esphome_ns.namespace("whirlpool")
 WhirlpoolClimate = whirlpool_ns.class_("WhirlpoolClimate", climate_ir.ClimateIR)
 
 Model = whirlpool_ns.enum("Model")
-MODELS = Model.options(
-    "DG11J1-3A", "DG11J1-91", "HISENSE_ARG", "HITACHI_HCRA31NEWH", prefix="MODEL_"
-)
+MODELS = Model.options("DG11J1-3A", "DG11J1-91", "HISENSE_ARG", prefix="MODEL_")
 
 CONFIG_SCHEMA = climate_ir.climate_ir_with_receiver_schema(WhirlpoolClimate).extend(
     {
@@ -28,5 +26,3 @@ async def to_code(config: ConfigType) -> None:
     # cv.enum keeps the YAML key as a str subclass; the MockObj value cannot be compared
     if config[CONF_MODEL] == "HISENSE_ARG":
         cg.add_define("USE_WHIRLPOOL_HISENSE_ARG")
-    elif config[CONF_MODEL] == "HITACHI_HCRA31NEWH":
-        cg.add_define("USE_WHIRLPOOL_HITACHI_HCRA31NEWH")

esphome/components/whirlpool/whirlpool.cpp

@@ -2,8 +2,6 @@
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
-#include <algorithm>
-
 namespace esphome::whirlpool {
 
 ESPHOME_LOG_TAG(TAG, "whirlpool.climate");
@@ -46,17 +44,6 @@ static constexpr uint8_t HISENSE_ARG_POWER_TOGGLE = 0x01;   // byte 15
 static constexpr uint8_t HISENSE_ARG_SETTINGS_ONLY = 0x02;  // byte 15
 static constexpr uint8_t HISENSE_ARG_FIXED_TEMP_STEP = 7;   // auto and fan-only send 23 C
 
-// Hitachi HCRA31NEWH model: power is a state in every frame
-static constexpr uint8_t HITACHI_BYTE10 = 0x20;      // byte 10
-static constexpr uint8_t HITACHI_COOL = 0x02;        // byte 15
-static constexpr uint8_t HITACHI_OFF = 0x01;         // byte 15
-static constexpr uint8_t HITACHI_BYTE18_ON = 0x38;   // byte 18
-static constexpr uint8_t HITACHI_BYTE18_OFF = 0x28;  // byte 18
-static constexpr uint8_t HITACHI_BYTE19 = 0x08;      // byte 19
-
-// Header, 21 bytes of 8 bits, two dividers and the footer mark
-static constexpr uint32_t WHIRLPOOL_FRAME_TIMINGS = 2 + WHIRLPOOL_STATE_LENGTH * 16 + 2 * 2 + 1;
-
 WhirlpoolClimate::WhirlpoolClimate()
     : climate_ir::ClimateIR(
           WHIRLPOOL_DG11J1_3A_TEMP_MIN, WHIRLPOOL_DG11J1_3A_TEMP_MAX, 1.0f, true, true,
@@ -68,19 +55,19 @@ void WhirlpoolClimate::transmit_state() {
   this->last_transmit_time_ = millis();  // setting the time of the last transmission.
   uint8_t remote_state[WHIRLPOOL_STATE_LENGTH];
   memset(remote_state, 0, sizeof(remote_state));
-  put_be16(remote_state, this->remote_id_());
+  remote_state[0] = 0x83;
+  remote_state[1] = 0x06;
   remote_state[6] = 0x80;
-  remote_state[18] = 0x08;
+  remote_state[18] = 0x08;  // the same on every supported model
 
-  const bool powered_on = this->mode != climate::CLIMATE_MODE_OFF;
-  // Hitachi sends power as a state instead of a toggle
-  const bool power_toggle = !this->is_hitachi_hcra31newh_() && powered_on != this->powered_on_assumed;
+  auto powered_on = this->mode != climate::CLIMATE_MODE_OFF;
+  const bool power_toggle = powered_on != this->powered_on_assumed;
   if (power_toggle) {
     // Set power toggle command
     remote_state[2] = 4;
     remote_state[15] = 1;
+    this->powered_on_assumed = powered_on;
   }
-  this->powered_on_assumed = powered_on;
   switch (this->mode) {
     case climate::CLIMATE_MODE_HEAT_COOL:
       // set fan auto
@@ -106,10 +93,6 @@ void WhirlpoolClimate::transmit_state() {
       remote_state[15] = 6;
       break;
     case climate::CLIMATE_MODE_OFF:
-      // These remotes keep the cool code in the power-off frame
-      if (this->is_hisense_arg_() || this->is_hitachi_hcra31newh_())
-        remote_state[3] = WHIRLPOOL_COOL;
-      break;
     default:
       break;
   }
@@ -119,7 +102,6 @@ void WhirlpoolClimate::transmit_state() {
   // Temperature
   auto temp = (uint8_t) roundf(clamp(this->target_temperature, this->temperature_min_(), this->temperature_max_()));
   const auto temp_step = (uint8_t) (temp - this->temperature_min_());
-  this->target_temperature = temp;  // publish what the unit was sent
   if (hisense_arg && this->fixed_temp_mode_()) {
     remote_state[3] |= HISENSE_ARG_FIXED_TEMP_STEP << 4;
   } else {
@@ -149,6 +131,7 @@ void WhirlpoolClimate::transmit_state() {
       remote_state[2] |= WHIRLPOOL_SWING_MASK;
       remote_state[8] = WHIRLPOOL_SWING_BYTE8;
     }
+    this->encode_hisense_arg_(remote_state, power_toggle, temp_step);
   } else if (this->send_swing_cmd_) {
     if (this->swing_mode == climate::CLIMATE_SWING_VERTICAL || this->swing_mode == climate::CLIMATE_SWING_OFF) {
       remote_state[2] |= WHIRLPOOL_SWING_MASK;
@@ -156,11 +139,6 @@ void WhirlpoolClimate::transmit_state() {
     }
   }
 
-  if (hisense_arg)
-    this->encode_hisense_arg_(remote_state, power_toggle, temp_step);
-  if (this->is_hitachi_hcra31newh_())
-    this->encode_hitachi_hcra31newh_(remote_state);
-
   // Checksum
   remote_state[13] = xor_bytes(&remote_state[2], 11, remote_state[13]);
   remote_state[20] = xor_bytes(&remote_state[14], 6, remote_state[20]);
@@ -170,7 +148,6 @@ void WhirlpoolClimate::transmit_state() {
   // Send code
   auto transmit = this->transmitter_->transmit();
   auto *data = transmit.get_data();
-  data->reserve(WHIRLPOOL_FRAME_TIMINGS);
 
   data->set_carrier_frequency(38000);
 
@@ -203,6 +180,10 @@ void WhirlpoolClimate::encode_hisense_arg_(uint8_t *remote_state, bool power_tog
   remote_state[15] = power_toggle ? HISENSE_ARG_POWER_TOGGLE : HISENSE_ARG_SETTINGS_ONLY;
 
   switch (this->mode) {
+    case climate::CLIMATE_MODE_OFF:
+      // The remote keeps the cool code in the power-off frame
+      remote_state[3] = (remote_state[3] & 0xF0) | WHIRLPOOL_COOL;
+      break;
     case climate::CLIMATE_MODE_DRY:
       // The unit runs these fan speeds itself; the user's choice is kept for the next mode change
       remote_state[2] &= ~WHIRLPOOL_FAN_MASK;
@@ -231,27 +212,6 @@ void WhirlpoolClimate::encode_hisense_arg_(uint8_t *remote_state, bool power_tog
 #endif
 }
 
-void WhirlpoolClimate::encode_hitachi_hcra31newh_(uint8_t *remote_state) const {
-#ifdef USE_WHIRLPOOL_HITACHI_HCRA31NEWH
-  remote_state[10] = HITACHI_BYTE10;
-  remote_state[18] = HITACHI_BYTE18_ON;
-  remote_state[19] = HITACHI_BYTE19;
-  // The unit takes the whole state from every frame: only the off frame carries the power bit
-  switch (this->mode) {
-    case climate::CLIMATE_MODE_COOL:
-      remote_state[15] = HITACHI_COOL;
-      break;
-    case climate::CLIMATE_MODE_OFF:
-      remote_state[2] |= WHIRLPOOL_POWER;
-      remote_state[15] = HITACHI_OFF;
-      remote_state[18] = HITACHI_BYTE18_OFF;
-      break;
-    default:
-      break;
-  }
-#endif
-}
-
 bool WhirlpoolClimate::on_receive(remote_base::RemoteReceiveData data) {
   // Check if the esp isn't currently transmitting.
   if (millis() - this->last_transmit_time_ < 500) {
@@ -274,8 +234,7 @@ bool WhirlpoolClimate::on_receive(remote_base::RemoteReceiveData data) {
       if (!data.expect_item(WHIRLPOOL_BIT_MARK, WHIRLPOOL_GAP))
         return false;
     }
-    // The Hitachi remote always sends all 21 bytes; byte 18 holds its power state
-    if (i == WHIRLPOOL_SECOND_DIVIDER && !data.is_valid() && !this->is_hitachi_hcra31newh_()) {
+    if (i == WHIRLPOOL_SECOND_DIVIDER && !data.is_valid()) {
       // Remote control only sent 14 bytes, nothing more to read, not even the footer
       ESP_LOGV(TAG, "Remote control only sent %d bytes", i);
       skip_footer = true;
@@ -302,18 +261,13 @@ bool WhirlpoolClimate::on_receive(remote_base::RemoteReceiveData data) {
   ESP_LOGV_HEX(TAG, remote_state, WHIRLPOOL_STATE_LENGTH, WHIRLPOOL_STATE_LENGTH, "Received: %s");
 
   // verify header remote code
-  if (encode_uint16(remote_state[0], remote_state[1]) != this->remote_id_())
+  if (remote_state[0] != 0x83 || remote_state[1] != 0x06)
     return false;
 
   // powr on/off button
   ESP_LOGV(TAG, "Power: %02X", (remote_state[2] & WHIRLPOOL_POWER));
 
-  if (this->is_hitachi_hcra31newh_()) {
-    // Power is a state: byte 18 says whether the unit is off
-    this->powered_on_assumed = remote_state[18] != HITACHI_BYTE18_OFF;
-    if (!this->powered_on_assumed)
-      this->mode = climate::CLIMATE_MODE_OFF;
-  } else if ((remote_state[2] & WHIRLPOOL_POWER) == WHIRLPOOL_POWER) {
+  if ((remote_state[2] & WHIRLPOOL_POWER) == WHIRLPOOL_POWER) {
     auto powered_on = this->mode != climate::CLIMATE_MODE_OFF;
 
     if (powered_on) {
@@ -355,7 +309,7 @@ bool WhirlpoolClimate::on_receive(remote_base::RemoteReceiveData data) {
     int temp = remote_state[3] & 0xF0;
     ESP_LOGVV(TAG, "Temperature Raw: %02X", temp);
     temp = (uint8_t) temp >> 4;
-    temp = std::min(temp + static_cast<int>(this->temperature_min_()), static_cast<int>(this->temperature_max_()));
+    temp += static_cast<int>(this->temperature_min_());
     ESP_LOGVV(TAG, "Temperature Climate: %u", temp);
     this->target_temperature = temp;
   }

esphome/components/whirlpool/whirlpool.h

@@ -6,10 +6,9 @@ namespace esphome::whirlpool {
 
 /// Simple enum to represent models.
 enum Model {
-  MODEL_DG11J1_3A = 0,           /// Temperature range is from 18 to 32
-  MODEL_DG11J1_91 = 1,           /// Temperature range is from 16 to 30
-  MODEL_HISENSE_ARG = 2,         /// Hisense/BGH (Argentina), 16 to 30
-  MODEL_HITACHI_HCRA31NEWH = 3,  /// Hitachi with the HCRA31NEWH remote, 16 to 30
+  MODEL_DG11J1_3A = 0,    /// Temperature range is from 18 to 32
+  MODEL_DG11J1_91 = 1,    /// Temperature range is from 16 to 30
+  MODEL_HISENSE_ARG = 2,  /// Hisense/BGH (Argentina), 16 to 30
 };
 
 // Temperature
@@ -30,9 +29,7 @@ class WhirlpoolClimate final : public climate_ir::ClimateIR {
 
   /// Override control to change settings of the climate device.
   void control(const climate::ClimateCall &call) override {
-    // The toggle remotes flip swing on every press, so only send one when the mode really changes
-    auto swing = call.get_swing_mode();
-    this->send_swing_cmd_ = swing.has_value() && *swing != this->swing_mode;
+    send_swing_cmd_ = call.get_swing_mode().has_value();
     climate_ir::ClimateIR::control(call);
   }
 
@@ -58,22 +55,10 @@ class WhirlpoolClimate final : public climate_ir::ClimateIR {
     return false;
 #endif
   }
-  /// False when the model is compiled out, so the compiler drops the Hitachi branches.
-  bool is_hitachi_hcra31newh_() const {
-#ifdef USE_WHIRLPOOL_HITACHI_HCRA31NEWH
-    return this->model_ == MODEL_HITACHI_HCRA31NEWH;
-#else
-    return false;
-#endif
-  }
-  /// The remote ID sent in bytes 0 and 1.
-  uint16_t remote_id_() const { return this->is_hitachi_hcra31newh_() ? 0xA959 : 0x8306; }
   /// Modes in which the Hisense ARG model sends a fixed temperature.
   bool fixed_temp_mode_() const;
   /// Add the Hisense ARG bytes on top of the common whirlpool frame.
   void encode_hisense_arg_(uint8_t *remote_state, bool power_toggle, uint8_t temp_step) const;
-  /// Add the Hitachi HCRA31NEWH bytes on top of the common whirlpool frame.
-  void encode_hitachi_hcra31newh_(uint8_t *remote_state) const;
   /// Set the time of the last transmission.
   uint32_t last_transmit_time_{};
 

esphome/components/wifi/wifi_component.h

@@ -563,7 +563,7 @@ class WiFiComponent final : public Component {
   // (In most use cases you won't need these)
   /// Setup WiFi interface.
   void setup() override;
-#if defined(USE_ESP32) || defined(USE_LN882X) || defined(USE_BK72XX)
+#if defined(USE_LN882X) || defined(USE_BK72XX)
   void on_powerdown() override;
 #endif
   void start();

esphome/components/wifi/wifi_component_esp_idf.cpp

@@ -1635,21 +1635,6 @@ bool WiFiComponent::wifi_dpp_start_listen_() {
 void WiFiComponent::wifi_dpp_stop_listen_() { esp_supp_dpp_stop_listen(); }
 #endif
 
-void WiFiComponent::on_powerdown() {
-  // Leave the AP before esp_restart() or deep sleep stops Wi-Fi. esp_wifi_stop() while associated
-  // makes the ESP32 retransmit its Disassociation up to the retry limit although the AP ACKs it
-  // (32 copies with protected management frames), which some APs handle badly.
-  // Upstream bug: https://github.com/espressif/esp-idf/issues/19443 - remove this once it is fixed
-  // in the ESP-IDF versions we support.
-  // Ask the driver: s_sta_connected lags until the main loop has handled the connect event.
-  wifi_ap_record_t ap_info;
-  if (esp_wifi_sta_get_ap_info(&ap_info) != ESP_OK)
-    return;
-  ESP_LOGD(TAG, "Disconnecting before powerdown");
-  esp_wifi_disconnect();
-  delay(100);  // NOLINT: once per reboot or deep sleep, lets the disassociation go out
-}
-
 bool WiFiComponent::wifi_disconnect_() { return esp_wifi_disconnect(); }
 
 bssid_t WiFiComponent::wifi_bssid() {

esphome/core/application.cpp

@@ -294,8 +294,6 @@ void Application::reboot() {
   for (auto &component : std::ranges::reverse_view(this->components_)) {
     component->on_shutdown();
   }
-  // No teardown on a forced reboot, but still power hardware down (Wi-Fi leaves the AP)
-  this->run_powerdown_hooks();
   arch_restart();
 }
 void Application::safe_reboot() {

esphome/core/base_automation.h

@@ -595,52 +595,4 @@ template<typename... Ts> class WaitUntilAction : public Action<Ts...>, public Co
   uint8_t stop_generation_{0};
 };
 
-template<typename... Ts> class UpdateComponentAction : public Action<Ts...> {
- public:
-  UpdateComponentAction(PollingComponent *component) : component_(component) {}
-
-  void play(const Ts &...x) override {
-    if (!this->component_->is_ready())
-      return;
-    this->component_->update();
-  }
-
- protected:
-  PollingComponent *component_;
-};
-
-template<typename... Ts> class SuspendComponentAction : public Action<Ts...> {
- public:
-  SuspendComponentAction(PollingComponent *component) : component_(component) {}
-
-  void play(const Ts &...x) override {
-    if (!this->component_->is_ready())
-      return;
-    this->component_->stop_poller();
-  }
-
- protected:
-  PollingComponent *component_;
-};
-
-template<typename... Ts> class ResumeComponentAction : public Action<Ts...> {
- public:
-  ResumeComponentAction(PollingComponent *component) : component_(component) {}
-  TEMPLATABLE_VALUE(uint32_t, update_interval)
-
-  void play(const Ts &...x) override {
-    if (!this->component_->is_ready()) {
-      return;
-    }
-    optional<uint32_t> update_interval = this->update_interval_.optional_value(x...);
-    if (update_interval.has_value()) {
-      this->component_->set_update_interval(update_interval.value());
-    }
-    this->component_->start_poller();
-  }
-
- protected:
-  PollingComponent *component_;
-};
-
 }  // namespace esphome

esphome/core/component.h

@@ -185,12 +185,10 @@ class Component {
    */
   virtual bool teardown() { return true; }
 
-  /** Called last before a reboot or deep sleep to power down hardware.
+  /** Called after teardown is complete to power down hardware.
    *
-   * On a safe shutdown this is called after all components have finished their teardown process,
+   * This is called after all components have finished their teardown process,
    * making it safe to power down hardware like ethernet PHY.
-   * On a forced reboot (Application::reboot()) it is called right after on_shutdown() with no
-   * teardown, so implementations must not assume teardown() has run.
    */
   virtual void on_powerdown() {}
 

esphome/core/defines.h

@@ -387,7 +387,6 @@
 #define USE_WATER_HEATER
 #define USE_WATER_HEATER_VISUAL_OVERRIDES
 #define USE_WHIRLPOOL_HISENSE_ARG
-#define USE_WHIRLPOOL_HITACHI_HCRA31NEWH
 #define USE_ZWAVE_PROXY
 
 // Feature flags which do not work for zephyr

tests/components/climate_ir/climate_ir_code_test.cpp

@@ -1,43 +0,0 @@
-#include <gtest/gtest.h>
-#include "esphome/components/climate_ir/climate_ir.h"
-
-namespace esphome::climate_ir::testing {
-
-static constexpr IRCode FANS[] PROGMEM = {
-    {climate::CLIMATE_FAN_AUTO, 0x10},
-    {climate::CLIMATE_FAN_LOW, 0x20},
-    {climate::CLIMATE_FAN_HIGH, 0x30},
-};
-
-TEST(ClimateIRCodeTest, FindByValue) {
-  const auto entry = find_ir_code(FANS, climate::CLIMATE_FAN_LOW, false);
-  ASSERT_TRUE(entry.has_value());
-  EXPECT_EQ(entry->value, climate::CLIMATE_FAN_LOW);
-  EXPECT_EQ(entry->code, 0x20);
-}
-
-TEST(ClimateIRCodeTest, FindByCode) {
-  const auto entry = find_ir_code(FANS, 0x30, true);
-  ASSERT_TRUE(entry.has_value());
-  EXPECT_EQ(entry->value, climate::CLIMATE_FAN_HIGH);
-}
-
-TEST(ClimateIRCodeTest, FindMissing) {
-  EXPECT_FALSE(find_ir_code(FANS, climate::CLIMATE_FAN_MEDIUM, false).has_value());
-  // A code that is also a listed value must not match when looking up codes
-  EXPECT_FALSE(find_ir_code(FANS, climate::CLIMATE_FAN_LOW, true).has_value());
-}
-
-TEST(ClimateIRCodeTest, ToCode) {
-  EXPECT_EQ(to_ir_code(FANS, climate::CLIMATE_FAN_HIGH, 0x00), 0x30);
-  EXPECT_EQ(to_ir_code(FANS, climate::CLIMATE_FAN_MEDIUM, 0x00), 0x00);
-}
-
-TEST(ClimateIRCodeTest, FromCode) {
-  EXPECT_EQ(from_ir_code(FANS, 0x20, climate::CLIMATE_FAN_AUTO), climate::CLIMATE_FAN_LOW);
-  EXPECT_EQ(from_ir_code(FANS, 0x99, climate::CLIMATE_FAN_AUTO), climate::CLIMATE_FAN_AUTO);
-  // The current state as the fallback leaves it unchanged on an unknown code
-  EXPECT_EQ(from_ir_code(FANS, 0x99, climate::CLIMATE_FAN_MEDIUM), climate::CLIMATE_FAN_MEDIUM);
-}
-
-}  // namespace esphome::climate_ir::testing

tests/components/ethernet_info/test.esp32-idf.yaml

@@ -2,7 +2,3 @@ packages:
   i2c: !include ../../test_build_components/common/i2c/esp32-idf.yaml
 
 <<: !include common.yaml
-
-# IPv6 with an IP sensor: compiles the IPv6 event handler's listener notification
-network:
-  enable_ipv6: true

tests/components/whirlpool/__init__.py

@@ -10,8 +10,7 @@ def override_manifest(manifest: ComponentManifestOverride) -> None:
     manifest.auto_load = ["climate_ir", "climate"]
 
     async def to_code_testing(config: ConfigType) -> None:
-        # Compiles in the Hisense ARG and Hitachi models, which climate.py adds only when configured
+        # Compiles in the Hisense ARG model, which climate.py adds only when it is configured
         cg.add_define("USE_WHIRLPOOL_HISENSE_ARG")
-        cg.add_define("USE_WHIRLPOOL_HITACHI_HCRA31NEWH")
 
     manifest.to_code = to_code_testing

tests/components/whirlpool/common.yaml

@@ -8,8 +8,3 @@ climate:
     model: HISENSE_ARG
     transmitter_id: xmitr
     receiver_id: rcvr
-  - platform: whirlpool
-    name: Whirlpool Hitachi HCRA31NEWH Climate
-    model: HITACHI_HCRA31NEWH
-    transmitter_id: xmitr
-    receiver_id: rcvr

tests/components/whirlpool/whirlpool_tests.cpp

@@ -252,9 +252,6 @@ TEST(WhirlpoolHisenseArg, SwingIsSentOnEveryTransmit) {
 
 TEST(WhirlpoolDG11J13A, SwingIsSentOnlyWhenItChanges) {
   Fixture f(MODEL_DG11J1_3A);
-  f.command(climate::CLIMATE_MODE_COOL, 24, climate::CLIMATE_FAN_LOW, climate::CLIMATE_SWING_OFF);
-  EXPECT_EQ(f.last_frame()[2] & 0x80, 0) << "swing is already off";
-
   f.command(climate::CLIMATE_MODE_COOL, 24, climate::CLIMATE_FAN_LOW, climate::CLIMATE_SWING_VERTICAL);
   Frame frame = f.last_frame();
   EXPECT_EQ(frame[2] & 0x80, 0x80);
@@ -264,9 +261,6 @@ TEST(WhirlpoolDG11J13A, SwingIsSentOnlyWhenItChanges) {
   frame = f.last_frame();
   EXPECT_EQ(frame[2] & 0x80, 0);
   EXPECT_EQ(frame[8], 0x00);
-
-  f.command(climate::CLIMATE_MODE_COOL, 25, climate::CLIMATE_FAN_LOW, climate::CLIMATE_SWING_VERTICAL);
-  EXPECT_EQ(f.last_frame()[2] & 0x80, 0) << "swing is already vertical";
 }
 
 // Cool 24 C (step 8), fan low, powered on assumed
@@ -391,90 +385,4 @@ TEST(WhirlpoolHisenseArg, EveryTransmitHasValidChecksums) {
   }
 }
 
-// Cool 24 C (step 8), fan low, unit on
-static Frame hitachi_cool_frame() {
-  return with_checksums({0xA9, 0x59, 0x03, 0x82, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x20,
-                         0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x38, 0x08, 0x00});
-}
-
-// The off frame: power bit, cool code, byte 15 0x01 and byte 18 0x28
-static Frame hitachi_off_frame() {
-  return with_checksums({0xA9, 0x59, 0x07, 0x82, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x20,
-                         0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x28, 0x08, 0x00});
-}
-
-TEST(WhirlpoolHitachiHCRA31NEWH, CoolAndOffMatchKnownFrames) {
-  Fixture f(MODEL_HITACHI_HCRA31NEWH);
-  f.command(climate::CLIMATE_MODE_COOL, 24, climate::CLIMATE_FAN_LOW);
-  // Turning on sends the full state with no power bit
-  expect_frame(f.last_frame(), hitachi_cool_frame());
-
-  f.command(climate::CLIMATE_MODE_OFF, 24, climate::CLIMATE_FAN_LOW);
-  expect_frame(f.last_frame(), hitachi_off_frame());
-
-  // A second off command still sends the power bit
-  f.command(climate::CLIMATE_MODE_OFF, 24, climate::CLIMATE_FAN_LOW);
-  EXPECT_EQ(f.last_frame()[2] & 0x04, 0x04);
-
-  f.command(climate::CLIMATE_MODE_HEAT, 24, climate::CLIMATE_FAN_LOW);
-  const Frame frame = f.last_frame();
-  EXPECT_EQ(frame[2] & 0x04, 0);
-  EXPECT_EQ(frame[3], 0x80);
-  EXPECT_EQ(frame[15], 0x06);
-  EXPECT_EQ(frame[18], 0x38);
-}
-
-TEST(WhirlpoolHitachiHCRA31NEWH, ReceivePowerIsAState) {
-  Fixture f(MODEL_HITACHI_HCRA31NEWH);
-  ASSERT_EQ(f.climate.mode, climate::CLIMATE_MODE_OFF);
-
-  // An on frame restores the mode even though it has no power bit
-  EXPECT_TRUE(receive(f.climate, hitachi_cool_frame()));
-  EXPECT_EQ(f.climate.mode, climate::CLIMATE_MODE_COOL);
-  EXPECT_FLOAT_EQ(f.climate.target_temperature, 24);
-  EXPECT_EQ(f.climate.fan_mode, climate::CLIMATE_FAN_LOW);
-  // The same frame again keeps it on
-  EXPECT_TRUE(receive(f.climate, hitachi_cool_frame()));
-  EXPECT_EQ(f.climate.mode, climate::CLIMATE_MODE_COOL);
-
-  EXPECT_TRUE(receive(f.climate, hitachi_off_frame()));
-  EXPECT_EQ(f.climate.mode, climate::CLIMATE_MODE_OFF);
-  // A repeated off frame does not toggle
-  EXPECT_TRUE(receive(f.climate, hitachi_off_frame()));
-  EXPECT_EQ(f.climate.mode, climate::CLIMATE_MODE_OFF);
-}
-
-TEST(WhirlpoolHitachiHCRA31NEWH, ReceiveChecksRemoteId) {
-  Fixture hitachi(MODEL_HITACHI_HCRA31NEWH);
-  EXPECT_FALSE(receive(hitachi.climate, hisense_cool_frame()));
-  Fixture whirlpool(MODEL_DG11J1_91);
-  EXPECT_FALSE(receive(whirlpool.climate, hitachi_cool_frame()));
-}
-
-TEST(WhirlpoolHitachiHCRA31NEWH, ReceivedTemperatureIsClamped) {
-  Fixture f(MODEL_HITACHI_HCRA31NEWH);
-  Frame frame = hitachi_cool_frame();
-  frame[3] = 0xF2;  // step 15 would be 31 C
-  EXPECT_TRUE(receive(f.climate, with_checksums(frame)));
-  EXPECT_FLOAT_EQ(f.climate.target_temperature, 30);
-}
-
-TEST(WhirlpoolDG11J13A, TargetIsClampedAndRoundedToWhatWasSent) {
-  Fixture f(MODEL_DG11J1_3A);
-  f.command(climate::CLIMATE_MODE_COOL, 35, climate::CLIMATE_FAN_LOW);
-  EXPECT_FLOAT_EQ(f.climate.target_temperature, 32);
-  f.command(climate::CLIMATE_MODE_COOL, 24.4f, climate::CLIMATE_FAN_LOW);
-  EXPECT_FLOAT_EQ(f.climate.target_temperature, 24);
-}
-
-TEST(WhirlpoolHitachiHCRA31NEWH, ReceiveRejectsShortFrame) {
-  Fixture f(MODEL_HITACHI_HCRA31NEWH);
-  remote_base::RawTimings raw = waveform(hitachi_cool_frame());
-  // Cut after the second divider: 14 bytes, no footer
-  raw.resize(2 + 14 * 16 + 2 * 2);
-  remote_base::RemoteReceiveData data(raw, 25, remote_base::TOLERANCE_MODE_PERCENTAGE);
-  EXPECT_FALSE(static_cast<remote_base::RemoteReceiverListener &>(f.climate).on_receive(data));
-  EXPECT_EQ(f.climate.mode, climate::CLIMATE_MODE_OFF);
-}
-
 }  // namespace esphome::whirlpool::testing

tests/integration/fixtures/external_components/reboot_hook_recorder/__init__.py

@@ -1,23 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_NAME
-from esphome.types import ConfigType
-
-CODEOWNERS = ["@esphome/tests"]
-MULTI_CONF = True
-
-reboot_hook_recorder_ns = cg.esphome_ns.namespace("reboot_hook_recorder")
-RebootHookRecorder = reboot_hook_recorder_ns.class_("RebootHookRecorder", cg.Component)
-
-CONFIG_SCHEMA = cv.Schema(
-    {
-        cv.GenerateID(): cv.declare_id(RebootHookRecorder),
-        cv.Required(CONF_NAME): cv.string,
-    }
-).extend(cv.COMPONENT_SCHEMA)
-
-
-async def to_code(config: ConfigType) -> None:
-    var = cg.new_Pvariable(config[CONF_ID])
-    await cg.register_component(var, config)
-    cg.add(var.set_name(config[CONF_NAME]))

tests/integration/fixtures/external_components/reboot_hook_recorder/reboot_hook_recorder.cpp

@@ -1,10 +0,0 @@
-#include "reboot_hook_recorder.h"
-#include "esphome/core/log.h"
-
-namespace esphome::reboot_hook_recorder {
-
-ESPHOME_LOG_TAG(TAG, "reboot_hook_recorder");
-
-void RebootHookRecorder::record_(const char *hook) { ESP_LOGI(TAG, "HOOK %s %s", this->name_, hook); }
-
-}  // namespace esphome::reboot_hook_recorder

tests/integration/fixtures/external_components/reboot_hook_recorder/reboot_hook_recorder.h

@@ -1,33 +0,0 @@
-#pragma once
-
-#include "esphome/core/component.h"
-
-namespace esphome::reboot_hook_recorder {
-
-/// Logs every shutdown lifecycle hook it receives, so a test can check their order.
-class RebootHookRecorder : public Component {
- public:
-  void set_name(const char *name) { this->name_ = name; }
-
-  void on_safe_shutdown() override { this->record_("on_safe_shutdown"); }
-  void on_shutdown() override { this->record_("on_shutdown"); }
-  // Needs a second call to finish, like a component waiting for a connection to close
-  bool teardown() override {
-    if (++this->teardown_calls_ < 2) {
-      this->record_("teardown_pending");
-      return false;
-    }
-    if (this->teardown_calls_ == 2)
-      this->record_("teardown_done");
-    return true;
-  }
-  void on_powerdown() override { this->record_("on_powerdown"); }
-
- protected:
-  void record_(const char *hook);
-
-  const char *name_{""};
-  uint8_t teardown_calls_{0};
-};
-
-}  // namespace esphome::reboot_hook_recorder

tests/integration/fixtures/reboot_hook_order_forced.yaml

@@ -1,19 +0,0 @@
-esphome:
-  name: reboot-hooks-forced
-host:
-logger:
-  level: DEBUG
-api:
-  # Reboot once the test has connected, so that it sees every hook
-  on_client_connected:
-    - delay: 100ms
-    - lambda: App.reboot();
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-reboot_hook_recorder:
-  - name: first
-  - name: second

tests/integration/fixtures/reboot_hook_order_safe.yaml

@@ -1,19 +0,0 @@
-esphome:
-  name: reboot-hooks-safe
-host:
-logger:
-  level: DEBUG
-api:
-  # Reboot once the test has connected, so that it sees every hook
-  on_client_connected:
-    - delay: 100ms
-    - lambda: App.safe_reboot();
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-reboot_hook_recorder:
-  - name: first
-  - name: second

tests/integration/test_reboot_hook_order.py

@@ -1,80 +0,0 @@
-"""Test the order of the shutdown lifecycle hooks on a forced and on a safe reboot."""
-
-import re
-
-import pytest
-
-from .log_utils import LineWaiter
-from .types import APIClientConnectedFactory, RunCompiledFunction
-from .wait_utils import wait_or_fail
-
-HOOK_PATTERN = re.compile(r"HOOK (\w+) (\w+)")
-# Hooks run in reverse component order, so "first" gets each hook last.
-LAST_HOOK = "HOOK first on_powerdown"
-
-
-async def _record_reboot_hooks(
-    yaml_config: str,
-    run_compiled: RunCompiledFunction,
-    api_client_connected: APIClientConnectedFactory,
-) -> list[tuple[str, str]]:
-    """Connect, which makes the device reboot, and return its (component, hook) calls in order."""
-    waiter = LineWaiter()
-    hooks: list[tuple[str, str]] = []
-
-    def on_line(line: str) -> None:
-        if match := HOOK_PATTERN.search(line):
-            hooks.append((match[1], match[2]))
-        waiter.callback(line)
-
-    async with (
-        run_compiled(yaml_config, line_callback=on_line),
-        api_client_connected(),
-    ):
-        await wait_or_fail(
-            waiter.wait_for(LAST_HOOK),
-            5.0,
-            "Device did not run the powerdown hooks",
-            hooks=hooks,
-        )
-    return hooks
-
-
-@pytest.mark.asyncio
-async def test_reboot_hook_order_forced(
-    yaml_config: str,
-    run_compiled: RunCompiledFunction,
-    api_client_connected: APIClientConnectedFactory,
-) -> None:
-    """A forced reboot runs on_shutdown then on_powerdown, with no safe shutdown or teardown."""
-    hooks = await _record_reboot_hooks(yaml_config, run_compiled, api_client_connected)
-
-    assert hooks == [
-        ("second", "on_shutdown"),
-        ("first", "on_shutdown"),
-        ("second", "on_powerdown"),
-        ("first", "on_powerdown"),
-    ]
-
-
-@pytest.mark.asyncio
-async def test_reboot_hook_order_safe(
-    yaml_config: str,
-    run_compiled: RunCompiledFunction,
-    api_client_connected: APIClientConnectedFactory,
-) -> None:
-    """A safe reboot powers down only after every component has finished its teardown."""
-    hooks = await _record_reboot_hooks(yaml_config, run_compiled, api_client_connected)
-
-    assert hooks == [
-        ("second", "on_safe_shutdown"),
-        ("first", "on_safe_shutdown"),
-        ("second", "on_shutdown"),
-        ("first", "on_shutdown"),
-        ("second", "teardown_pending"),
-        ("first", "teardown_pending"),
-        ("second", "teardown_done"),
-        ("first", "teardown_done"),
-        ("second", "on_powerdown"),
-        ("first", "on_powerdown"),
-    ]

tests/unit_tests/test_automation.py

@@ -2441,16 +2441,25 @@ def polling_component() -> None:
 @pytest.mark.asyncio
 @pytest.mark.usefixtures("polling_component")
 @pytest.mark.parametrize(
-    "name",
-    ["component.update", "component.suspend", "component.resume"],
+    ("name", "call"),
+    [
+        ("component.update", "update()"),
+        ("component.suspend", "stop_poller()"),
+        ("component.resume", "start_poller()"),
+    ],
 )
-async def test_component_action_codegen(name: str) -> None:
-    """Each action is an object constructed with the component, with no interval set."""
+async def test_component_action_codegen(name: str, call: str) -> None:
+    """The call goes through ``PollingComponent`` and only once the component is ready."""
     await build_action(_component_action(name), TEMPLATE_ARG, [])
 
-    class_name = str(ACTION_REGISTRY[name].type_id)
-    assert f"new(act) {class_name}<>(comp);" in CORE.cpp_main_section
-    assert "set_update_interval" not in CORE.cpp_main_section
+    assert "new(act) ApplyAction<esphome__act__fn>();" in CORE.cpp_main_section
+    assert (
+        "  PollingComponent &esphome__component = *::comp;\n"
+        "  if (esphome__component.is_ready()) {\n"
+        f"    esphome__component.{call};\n"
+        "  }\n"
+    ) in CORE.cpp_global_section
+    assert "set_update_interval" not in CORE.cpp_global_section
 
 
 @pytest.mark.asyncio
@@ -2466,14 +2475,17 @@ async def test_component_resume_constant_interval_codegen() -> None:
     )
 
     assert (
-        "act->set_update_interval([]() -> uint32_t {\n    return 250;\n});"
-    ) in CORE.cpp_main_section
+        "  if (esphome__component.is_ready()) {\n"
+        "    esphome__component.set_update_interval(250);\n"
+        "    esphome__component.start_poller();\n"
+        "  }\n"
+    ) in CORE.cpp_global_section
 
 
 @pytest.mark.asyncio
 @pytest.mark.usefixtures("polling_component")
 async def test_component_resume_interval_lambda_codegen() -> None:
-    """A templated interval is a lambda over the trigger args."""
+    """A templated interval is computed from the trigger args, only once ready."""
     await build_action(
         _component_action(
             "component.resume", {CONF_UPDATE_INTERVAL: Lambda("return x * 1000;")}
@@ -2482,27 +2494,91 @@ async def test_component_resume_interval_lambda_codegen() -> None:
         [(cg.uint32, "x")],
     )
 
-    main = CORE.cpp_main_section
-    assert "new(act) ResumeComponentAction<uint32_t>(comp);" in main
     assert (
-        "act->set_update_interval([](uint32_t x) -> uint32_t {\n"
+        "static void esphome__act__fn(const std::remove_cvref_t<uint32_t> & x) {\n"
+        "  PollingComponent &esphome__component = *::comp;\n"
+        "  if (esphome__component.is_ready()) {\n"
+        "    esphome__component.set_update_interval([](uint32_t x) -> uint32_t {\n"
         "    return x * 1000;\n"
-        "});"
-    ) in main
+        "  }(x));\n"
+        "    esphome__component.start_poller();\n"
+        "  }\n"
+    ) in CORE.cpp_global_section
+
+
+@pytest.mark.asyncio
+@pytest.mark.usefixtures("apply_actions")
+async def test_component_update_not_ready_still_runs_merged_actions() -> None:
+    """The ready check skips only the update, never the actions merged after it."""
+    cg.new_Pvariable(ID("pcomp", is_declaration=True, type=cg.PollingComponent))
+    update = _component_action("component.update")
+    update["component.update"][CONF_ID] = ID("pcomp", type=cg.PollingComponent)
+
+    result = await build_action_list(
+        [update, _action("my.a", "act_a")], TEMPLATE_ARG, []
+    )
+
+    assert [str(action) for action in result] == ["act"]
+    text = CORE.cpp_global_section
+    assert text.index("esphome__component.update();") < text.index("::comp->do_a();")
+    # The only return is the stop check between the two actions
+    assert text.count("return;") == 1
+
+
+@pytest.mark.asyncio
+@pytest.mark.usefixtures("apply_actions")
+async def test_callback_automation_if_with_component_update_is_direct() -> None:
+    """An ``if`` whose branches update components becomes plain C++ in the callback."""
+    cg.new_Pvariable(ID("pcomp", is_declaration=True, type=cg.PollingComponent))
+
+    def update(id_: str) -> ConfigType:
+        return {
+            "component.update": {CONF_ID: ID("pcomp", type=cg.PollingComponent)},
+            CONF_TYPE_ID: ID(
+                id_, is_declaration=True, type=ApplyAction, is_manual=False
+            ),
+        }
+
+    conf = _automation_conf(
+        {
+            "if": {
+                CONF_CONDITION: _inline_condition(),
+                CONF_THEN: [update("upd_then")],
+                CONF_ELSE: [update("upd_else")],
+            },
+            CONF_TYPE_ID: ID(
+                "act_if", is_declaration=True, type=IfAction, is_manual=False
+            ),
+        }
+    )
+
+    await build_callback_automation(CALLBACK_PARENT, "add_cb", [], conf)
+
+    assert "Action" not in CORE.cpp_main_section
+    assert "Condition" not in CORE.cpp_main_section
+    text = CORE.cpp_global_section
+    assert "if (esphome__condition) {" in text
+    assert text.count("esphome__component.update();") == 2
 
 
 @pytest.mark.asyncio
 @pytest.mark.usefixtures("polling_component")
 @pytest.mark.parametrize("body", ["x *= 1000; return x;", "return x *= 1000;"])
 async def test_component_resume_interval_lambda_takes_args_by_value(body: str) -> None:
-    """The user's interval lambda gets the trigger args by value, so it may modify them."""
+    """The user's interval lambda gets the trigger args by value, so it may modify them.
+
+    It is called rather than reduced, so even a single return modifies only its own copy.
+    """
     await build_action(
         _component_action("component.resume", {CONF_UPDATE_INTERVAL: Lambda(body)}),
         cg.TemplateArguments(cg.uint32),
         [(cg.uint32, "x")],
     )
 
-    assert f"[](uint32_t x) -> uint32_t {{\n    {body}\n}}" in CORE.cpp_main_section
+    assert (
+        f"set_update_interval([](uint32_t x) -> uint32_t {{\n    {body}\n  }}(x));"
+        in CORE.cpp_global_section
+    )
 
 
 COMPONENT_ID = ID("comp", type=cg.Component)