Hint at flash storage without naming an option that may not apply; move a test comment

Count a reservation against the store its own in_flash selects
Reserve through esphome.preferences, share the RTC layout with the crash handler, fold the redundant checks
2026-10-14 18:22:48 +00:00 · 2026-10-13 15:53:50 -10:00 · 2026-10-13 15:44:47 -10:00 · 2026-10-13 15:14:40 -10:00 · 2026-10-13 15:02:23 -10:00 · 2026-10-13 14:14:41 -10:00
267 changed files with 11921 additions and 647 deletions
@@ -144,6 +144,9 @@ file does, and it is the authority when they disagree. The most useful starting

 *   **C++ Preprocessor Directives:**
    *   **Avoid `#define` for constants:** Using `#define` for constants is discouraged and should be replaced with `const` variables or enums.
+    *   **A constant with a compile-time initializer is `static constexpr`,** not `static const`, at namespace scope
+        and inside functions; `static const` is only for a value computed at run time. A function-local
+        `static constexpr` table is a static constant to clang-tidy, so it is `UPPER_SNAKE_CASE` too.
    *   **Use `#define` only for:**
        - Conditional compilation (`#ifdef`, `#ifndef`)
        - Compile-time sizes calculated during Python code generation (e.g., configuring `std::array` or `StaticVector` dimensions via `cg.add_define()`)
@@ -217,6 +220,9 @@ file does, and it is the authority when they disagree. The most useful starting
        listener base (a second vptr per entity).
    *   **A global feature define** says the code is compiled in, not that this instance uses it: keep the
        per-instance check (`if (this->aux_device_ == ...)`) inside the `#ifdef`.
+    *   **Model-specific code** sits behind a define the Python side emits only for configs that use that model
+        (`cg.add_define("USE_SELEC_METER_EM4M")`), so the other models' builds leave it out; the runtime model check
+        stays inside the `#ifdef`.
    *   **Failures after `setup()`:** `mark_failed()` is for `setup()` only. A runtime read or write failure
        sets `status_set_warning()` and the next success clears it; writes skip work when `is_failed()`.
    *   **Fixed platform facts compile to nothing:** gate on `#ifdef USE_ESP8266` and friends, not on a
@@ -567,6 +573,9 @@ file does, and it is the authority when they disagree. The most useful starting
    An intentionally empty body (an unused `register_dumper` builder, for example) gets a one-line docstring, not `pass`.

 *   **Configuration Validation:**
+    *   **One schema per model:** when a component's options depend on a `model` key, use `cv.typed_schema({...},
+        key=CONF_MODEL, default_type=...)` with each model's own keys and defaults, not one schema plus a validator
+        that rejects keys and fills defaults afterwards.
    *   **Reuse existing validators:** Before writing a custom validator, check for an existing one in `config_validation.py` and compose it in `cv.All(...)` rather than duplicating logic across components. For example, rename a config key with `cv.rename_key(CONF_OLD, CONF_NEW, removed_in="2026.6.0")`, and reject mutually-exclusive keys with `cv.has_at_most_one_key(...)` / `cv.has_exactly_one_key(...)`. See how `api` composes `cv.has_exactly_one_key` + `cv.rename_key`.
    *   **Common Validators:** `cv.int_`, `cv.float_`, `cv.string`, `cv.boolean`, `cv.int_range(min=0, max=100)`, `cv.positive_int`, `cv.percentage`.
    *   **Complex Validation:** `cv.All(cv.string, cv.Length(min=1, max=50))`, `cv.Any(cv.int_, cv.string)`.
@@ -609,6 +618,9 @@ file does, and it is the authority when they disagree. The most useful starting
        `on_tx` lambda with a static counter and `inject_to_rx_buffer` (see `uart_mock_ld2412_requery_after_giveup.yaml`).
    *   **Keep build-test variants few:** one `test.<platform>.yaml` per platform the code actually differs
        on. A variant per board for platform-identical code only adds CI time.
+    *   **A test that needs a shared component in a particular state** (`esp32_ble` security settings, an option
+        that PSRAM rejects) cannot be grouped: the merged block wins and the whole batch fails. Add the component to
+        `ISOLATED_COMPONENTS` in `script/analyze_component_buses.py`, or move the option to a `test-<variant>` file.
    *   **Component Tests:** YAML-based compilation tests are located in `tests/`. The structure is as follows:
        ```
        tests/
@@ -106,6 +106,7 @@ esphome/components/bp1658cj/* @Cossid
 esphome/components/bp5758d/* @Cossid
 esphome/components/bq25186/* @Rapsssito
 esphome/components/bq27220/* @rggammon
+esphome/components/bq76972/* @limpkin
 esphome/components/bridge/* @kbx81
 esphome/components/bthome_mithermometer/* @nagyrobi
 esphome/components/button/* @esphome/core
@@ -211,8 +212,10 @@ esphome/components/factory_reset/* @anatoly-savchenkov
 esphome/components/fastled_base/* @OttoWinter
 esphome/components/feedback/* @ianchi
 esphome/components/file/* @esphome/core
+esphome/components/filter_lifetime/* @tuct
 esphome/components/fingerprint_grow/* @alexborro @loongyh @OnFreund
 esphome/components/font/* @clydebarrow @esphome/core
+esphome/components/friedrich/* @rwrozelle
 esphome/components/fs3000/* @kahrendt
 esphome/components/ft5x06/* @clydebarrow
 esphome/components/ft63x6/* @gpambrozio
@@ -240,6 +243,9 @@ esphome/components/haier/button/* @paveldn
 esphome/components/haier/sensor/* @paveldn
 esphome/components/haier/switch/* @paveldn
 esphome/components/haier/text_sensor/* @paveldn
+esphome/components/haier_tundra/* @fauxpark
+esphome/components/haier_tundra/button/* @fauxpark
+esphome/components/haier_tundra/switch/* @fauxpark
 esphome/components/havells_solar/* @sourabhjaiswal
 esphome/components/hbridge/fan/* @WeekendWarrior
 esphome/components/hbridge/light/* @DotNetDann
@@ -284,6 +290,7 @@ esphome/components/i2s_audio/microphone/* @jesserockz
 esphome/components/i2s_audio/speaker/* @jesserockz @kahrendt
 esphome/components/i2s_clockless_led_strip/* @j9brown
 esphome/components/iaqcore/* @yozik04
+esphome/components/icm20689/* @lboue
 esphome/components/icnt86/* @danepowell
 esphome/components/ili9xxx/* @clydebarrow @nielsnl68
 esphome/components/improv_base/* @esphome/core
@@ -432,6 +439,7 @@ esphome/components/ota/* @esphome/core
 esphome/components/output/* @esphome/core
 esphome/components/packet_transport/* @clydebarrow
 esphome/components/pca6416a/* @Mat931
+esphome/components/pca9505/* @ajfriesen @ssieb
 esphome/components/pca9554/* @bdraco @clydebarrow @hwstar
 esphome/components/pcf85063/* @brogon
 esphome/components/pcf8563/* @KoenBreeman
@@ -483,12 +483,9 @@ def has_ota() -> bool:

 def has_native_ota() -> bool:
    """Check if native API OTA upload is available (``platform: esphome``)."""
-    if CONF_OTA not in CORE.config:
-        return False
-    return any(
-        ota_item.get(CONF_PLATFORM) == CONF_ESPHOME
-        for ota_item in CORE.config[CONF_OTA]
-    )
+    from esphome.espota2 import esphome_ota_items
+
+    return bool(esphome_ota_items(CORE.config))


 def has_web_server_ota() -> bool:
@@ -1359,14 +1356,17 @@ def _choose_ota_platform(config: ConfigType, requested: str | None) -> str:
    return CONF_WEB_SERVER


+def _esphome_ota_conf(config: ConfigType) -> ConfigType | None:
+    """The validated esphome OTA platform block, if configured."""
+    from esphome.espota2 import esphome_ota_items
+
+    return next(iter(esphome_ota_items(config)), None)
+
+
 def _upload_via_native_api(
    config: ConfigType, network_devices: list[str], args: ArgsProtocol
 ) -> tuple[int, str | None]:
-    ota_conf: ConfigType = {}
-    for ota_item in config.get(CONF_OTA, []):
-        if ota_item.get(CONF_PLATFORM) == CONF_ESPHOME:
-            ota_conf = ota_item
-            break
+    ota_conf = _esphome_ota_conf(config) or {}

    from esphome import espota2
    from esphome.components.noise import static_encryption_key
@@ -1457,10 +1457,8 @@ def _old_key_notice(config: ConfigType) -> None:
    `upload` may send a stale image that still carries the previous key."""
    from esphome import espota2

-    for item in config.get(CONF_OTA, []):
-        if item.get(CONF_PLATFORM) == CONF_ESPHOME and (
-            item.get(CONF_ENCRYPTION) or {}
-        ).get(espota2.CONF_OLD_KEY):
+    for item in espota2.esphome_ota_items(config):
+        if (item.get(CONF_ENCRYPTION) or {}).get(espota2.CONF_OLD_KEY):
            _LOGGER.warning(espota2.OLD_KEY_REMOVE_NOTICE)


@@ -1468,12 +1466,12 @@ def _upload_via_web_server(
    config: ConfigType, network_devices: list[str], binary: Path
 ) -> tuple[int, str | None]:
    from esphome import web_server_ota
+    from esphome.espota2 import esphome_ota_items
    from esphome.web_server_helpers import get_web_server_connection

    if any(
-        ota_item.get(CONF_PLATFORM) == CONF_ESPHOME
-        and ota_item.get(CONF_ENCRYPTION) is not None
-        for ota_item in config.get(CONF_OTA, [])
+        ota_item.get(CONF_ENCRYPTION) is not None
+        for ota_item in esphome_ota_items(config)
    ):
        _LOGGER.warning(
            "This config has OTA encryption, but the web_server OTA path sends "
@@ -906,6 +906,21 @@ async def while_action_to_code(
    return var


+def _shadow_iteration(args: TemplateArgsType) -> TemplateArgsType:
+    """Rename an inherited `iteration` so the inner repeat's own counter can shadow it."""
+    names = {name for _, name in args}
+    renamed: TemplateArgsType = []
+    for type_, name in args:
+        if name == "iteration":
+            depth = 1
+            while f"iteration_{depth}" in names:
+                depth += 1
+            name = f"iteration_{depth}"
+            names.add(name)
+        renamed.append((type_, name))
+    return renamed
+
+
@register_action(
    "repeat",
    RepeatAction,
@@ -929,7 +944,7 @@ async def repeat_action_to_code(
    actions = await build_action_list(
        config[CONF_THEN],
        cg.TemplateArguments(cg.uint32, *template_arg.args),
-        [(cg.uint32, "iteration"), *args],
+        [(cg.uint32, "iteration"), *_shadow_iteration(args)],
    )
    for action in actions:
        cg.add(var.add_then_action(action))
@@ -1,10 +1,11 @@
 #pragma once

 #include <set>
+#include "esphome/core/log.h"

 namespace esphome::bedjet {

-static const char *const TAG = "bedjet";
+ESPHOME_LOG_TAG(TAG, "bedjet");

 /// Converts a BedJet fan step to a speed percentage, in the range of 5% to 100%.
 inline static uint8_t bedjet_fan_step_to_speed(const uint8_t fan) {
@@ -4,7 +4,7 @@

 namespace esphome::ble_client {

-const char *const Automation::TAG = "ble_client.automation";
+const char *const Automation::TAG = "ble_client.automation";  // NOLINT: ble_client never builds for ESP8266

 }  // namespace esphome::ble_client

@@ -2,10 +2,11 @@

 #include "esphome/components/bme280_base/bme280_base.h"
 #include "esphome/components/i2c/i2c.h"
+#include "esphome/core/log.h"

 namespace esphome::bme280_i2c {

-static const char *const TAG = "bme280_i2c.sensor";
+ESPHOME_LOG_TAG(TAG, "bme280_i2c.sensor");

 class BME280I2CComponent final : public esphome::bme280_base::BME280Component, public i2c::I2CDevice {
  bool read_byte(uint8_t a_register, uint8_t *data) override;
@@ -2,10 +2,11 @@

 #include "esphome/components/bmp280_base/bmp280_base.h"
 #include "esphome/components/i2c/i2c.h"
+#include "esphome/core/log.h"

 namespace esphome::bmp280_i2c {

-static const char *const TAG = "bmp280_i2c.sensor";
+ESPHOME_LOG_TAG(TAG, "bmp280_i2c.sensor");

 /// This class implements support for the BMP280 Temperature+Pressure i2c sensor.
 class BMP280I2CComponent final : public esphome::bmp280_base::BMP280Component, public i2c::I2CDevice {
@@ -2,10 +2,11 @@

 #include "esphome/components/bmp581_base/bmp581_base.h"
 #include "esphome/components/i2c/i2c.h"
+#include "esphome/core/log.h"

 namespace esphome::bmp581_i2c {

-static const char *const TAG = "bmp581_i2c.sensor";
+ESPHOME_LOG_TAG(TAG, "bmp581_i2c.sensor");

 /// This class implements support for the BMP581 Temperature+Pressure i2c sensor.
 class BMP581I2CComponent final : public esphome::bmp581_base::BMP581Component, public i2c::I2CDevice {
@@ -0,0 +1,111 @@
+from esphome import automation
+import esphome.codegen as cg
+from esphome.components import i2c, sensor
+import esphome.config_validation as cv
+from esphome.const import (
+    CONF_ADDRESS,
+    CONF_ID,
+    DEVICE_CLASS_TEMPERATURE,
+    DEVICE_CLASS_VOLTAGE,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_CELSIUS,
+    UNIT_VOLT,
+)
+from esphome.types import ConfigType
+
+AUTO_LOAD = ["sensor"]
+CODEOWNERS = ["@limpkin"]
+DEPENDENCIES = ["i2c"]
+DOMAIN = "bq76972"
+MULTI_CONF = True
+
+bq76972_ns = cg.esphome_ns.namespace("bq76972")
+BQ76972Component = bq76972_ns.class_(
+    "BQ76972Component", cg.PollingComponent, i2c.I2CDevice
+)
+
+CONF_REG_DISABLED = "reg_disabled"
+CONF_CRC_ENABLED = "crc_enabled"
+CONF_STACK_VOLTAGE = "stack_voltage"
+
+# Ordered as the chip reports them, starting at command 0x68
+CONF_TEMPERATURES = [
+    "internal_temperature",
+    "cfetoff_temperature",
+    "dfetoff_temperature",
+    "alert_temperature",
+    "ts1_temperature",
+    "ts2_temperature",
+    "ts3_temperature",
+    "hdq_temperature",
+    "dchg_temperature",
+    "ddsg_temperature",
+]
+
+CONF_CELL_VOLTAGES = [f"cell_{i}_voltage" for i in range(1, 17)]
+
+voltage_sensor_schema = sensor.sensor_schema(
+    unit_of_measurement=UNIT_VOLT,
+    accuracy_decimals=3,
+    device_class=DEVICE_CLASS_VOLTAGE,
+    state_class=STATE_CLASS_MEASUREMENT,
+)
+
+temp_sensor_schema = sensor.sensor_schema(
+    unit_of_measurement=UNIT_CELSIUS,
+    accuracy_decimals=1,
+    device_class=DEVICE_CLASS_TEMPERATURE,
+    state_class=STATE_CLASS_MEASUREMENT,
+)
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(BQ76972Component),
+            cv.Optional(CONF_CRC_ENABLED, default=False): cv.boolean,
+            cv.Optional(CONF_REG_DISABLED, default=False): cv.boolean,
+            cv.Optional(CONF_STACK_VOLTAGE): voltage_sensor_schema,
+            **{cv.Optional(key): voltage_sensor_schema for key in CONF_CELL_VOLTAGES},
+            **{cv.Optional(key): temp_sensor_schema for key in CONF_TEMPERATURES},
+        }
+    )
+    .extend(i2c.i2c_device_schema(0x08))
+    .extend(cv.polling_component_schema("10s"))
+)
+
+
+async def to_code(config: ConfigType) -> None:
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await i2c.register_i2c_device(var, config)
+
+    cg.add(var.set_crc_mode(config[CONF_CRC_ENABLED]))
+    cg.add(var.set_reg_disable(config[CONF_REG_DISABLED]))
+
+    sensors = sensor.sub_sensors(config)
+    await sensors(CONF_STACK_VOLTAGE, var.set_stack_voltage_sensor)
+
+    for idx, key in enumerate(CONF_TEMPERATURES):
+        if (conf := config.get(key)) is not None:
+            sens = await sensor.new_sensor(conf)
+            cg.add(var.set_temperature_sensor(sens, idx))
+
+    for idx, key in enumerate(CONF_CELL_VOLTAGES):
+        if (conf := config.get(key)) is not None:
+            sens = await sensor.new_sensor(conf)
+            cg.add(var.set_cell_sensor(sens, idx))
+
+
+BQ76972_PROGRAM_I2C_ADDRESS_SCHEMA = cv.maybe_simple_value(
+    {
+        cv.GenerateID(): cv.use_id(BQ76972Component),
+        cv.Required(CONF_ADDRESS): cv.templatable(cv.i2c_address),
+    },
+    key=CONF_ADDRESS,
+)
+
+automation.register_apply_action(
+    "bq76972.program_i2c_address",
+    BQ76972_PROGRAM_I2C_ADDRESS_SCHEMA,
+    automation.ApplyField(CONF_ADDRESS, "program_i2c_address", cg.uint8),
+)
@@ -0,0 +1,298 @@
+#include "bq76972.h"
+#include "esphome/core/hal.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
+
+namespace esphome::bq76972 {
+
+ESPHOME_LOG_TAG(TAG, "bq76972");
+
+static constexpr uint8_t BQ76972_REG_SUBCOMMAND = 0x3E;  // 0x3E low byte, 0x3F high byte
+static constexpr uint8_t BQ76972_REG_TRANSFER_BUFFER = 0x40;
+static constexpr uint8_t BQ76972_REG_CHECKSUM = 0x60;  // 0x60 checksum, 0x61 length
+static constexpr uint8_t BQ76972_CMD_BAT_STATUS = 0x12;
+static constexpr uint8_t BQ76972_CMD_CELL_START = 0x14;
+static constexpr uint8_t BQ76972_CMD_STACK_VOLTAGE = 0x34;
+static constexpr uint8_t BQ76972_CMD_TEMP_START = 0x68;
+static constexpr uint16_t BQ76972_SUBCMD_ENTER_CFG_UPDATE = 0x0090;
+static constexpr uint16_t BQ76972_SUBCMD_EXIT_CFG_UPDATE = 0x0092;
+static constexpr uint16_t BQ76972_MEM_REG12_CONFIG = 0x9236;
+static constexpr uint16_t BQ76972_MEM_REG0_CONFIG = 0x9237;
+static constexpr uint16_t BQ76972_MEM_I2C_ADDRESS = 0x923A;
+static constexpr uint16_t BQ76972_MEM_SWAP_COMM_MODE = 0x29BC;
+// Pin config of temperature reading N (1 = CFETOFF ... 9 = DDSG) is at this base + N
+static constexpr uint16_t BQ76972_MEM_TEMP_PIN_CONFIG_BASE = 0x92F9;
+static constexpr size_t BQ76972_TS1_INDEX = 4;  // a thermistor input by default
+static constexpr uint8_t BQ76972_PIN_CONFIG_THERMISTOR = 0x07;
+
+// 16 words with a CRC byte after every data byte
+static constexpr size_t BQ76972_MAX_TRANSFER = 64;
+static constexpr uint8_t BQ76972_MAX_POLLS = 50;
+
+static float raw_to_celsius(uint16_t raw) { return static_cast<int16_t>(raw) * 0.1f - 273.15f; }
+
+bool BQ76972Component::read_block_(uint8_t start_register, uint8_t *data, size_t len) {
+  if (!this->crc_mode_)
+    return this->read_bytes(start_register, data, len);
+
+  // With CRC enabled, every data byte is followed by a CRC byte
+  std::array<uint8_t, BQ76972_MAX_TRANSFER> buffer;
+  if (len == 0 || len * 2 > buffer.size())
+    return false;
+  if (!this->read_bytes(start_register, buffer.data(), len * 2))
+    return false;
+
+  // The first CRC also covers the write address, register and read address
+  const uint8_t crc0_input[4] = {static_cast<uint8_t>(this->address_ << 1), start_register,
+                                 static_cast<uint8_t>((this->address_ << 1) | 1), buffer[0]};
+  if (crc8(crc0_input, 4, 0x00, 0x07, true) != buffer[1]) {
+    ESP_LOGD(TAG, "CRC mismatch at register 0x%02X byte 0", start_register);
+    return false;
+  }
+  data[0] = buffer[0];
+  for (size_t i = 1; i < len; ++i) {
+    if (crc8(&buffer[i * 2], 1, 0x00, 0x07, true) != buffer[i * 2 + 1]) {
+      ESP_LOGD(TAG, "CRC mismatch at register 0x%02X byte %u", start_register, static_cast<unsigned>(i));
+      return false;
+    }
+    data[i] = buffer[i * 2];
+  }
+  return true;
+}
+
+bool BQ76972Component::write_block_(uint8_t start_register, const uint8_t *data, size_t len) {
+  if (!this->crc_mode_)
+    return this->write_bytes(start_register, data, len);
+
+  std::array<uint8_t, BQ76972_MAX_TRANSFER> buffer;
+  if (len == 0 || len * 2 > buffer.size())
+    return false;
+
+  // The first CRC also covers the write address and register
+  const uint8_t crc0_input[3] = {static_cast<uint8_t>(this->address_ << 1), start_register, data[0]};
+  buffer[0] = data[0];
+  buffer[1] = crc8(crc0_input, 3, 0x00, 0x07, true);
+  for (size_t i = 1; i < len; ++i) {
+    buffer[i * 2] = data[i];
+    buffer[i * 2 + 1] = crc8(&data[i], 1, 0x00, 0x07, true);
+  }
+  return this->write_bytes(start_register, buffer.data(), len * 2);
+}
+
+bool BQ76972Component::read_words_(uint8_t start_register, uint16_t *data, size_t num_words) {
+  std::array<uint8_t, BQ76972_MAX_TRANSFER / 2> bytes;
+  if (num_words * 2 > bytes.size() || !this->read_block_(start_register, bytes.data(), num_words * 2))
+    return false;
+  for (size_t i = 0; i < num_words; i++)
+    data[i] = encode_uint16(bytes[2 * i + 1], bytes[2 * i]);
+  return true;
+}
+
+bool BQ76972Component::send_subcommand_(uint16_t subcommand) {
+  const uint8_t bytes[2] = {static_cast<uint8_t>(subcommand & 0xFF), static_cast<uint8_t>(subcommand >> 8)};
+  return this->write_block_(BQ76972_REG_SUBCOMMAND, bytes, 2);
+}
+
+bool BQ76972Component::wait_for_subcommand_() {
+  uint8_t bytes[2];
+  for (uint8_t i = 0; i < BQ76972_MAX_POLLS; i++) {
+    if (!this->read_block_(BQ76972_REG_SUBCOMMAND, bytes, 2))
+      return false;
+    if (bytes[0] != 0xFF && bytes[1] != 0xFF)
+      return true;
+    delay(1);
+  }
+  return false;
+}
+
+bool BQ76972Component::wait_for_cfgupdate_() {
+  uint16_t status;
+  for (uint8_t i = 0; i < BQ76972_MAX_POLLS; i++) {
+    if (!this->read_words_(BQ76972_CMD_BAT_STATUS, &status, 1))
+      return false;
+    if (status & 0x0001)
+      return true;
+    delay(1);
+  }
+  return false;
+}
+
+bool BQ76972Component::read_subcommand_(uint16_t subcommand, uint8_t *data, size_t len) {
+  return this->send_subcommand_(subcommand) && this->wait_for_subcommand_() &&
+         this->read_block_(BQ76972_REG_TRANSFER_BUFFER, data, len);
+}
+
+bool BQ76972Component::write_subcommand_(uint16_t subcommand, const uint8_t *data, size_t len) {
+  if (!this->send_subcommand_(subcommand))
+    return false;
+  if (len == 0)
+    return true;
+  if (!this->write_block_(BQ76972_REG_TRANSFER_BUFFER, data, len))
+    return false;
+
+  // Inverted 8-bit sum of 0x3E, 0x3F and the data; length counts 0x3E, 0x3F, 0x60, 0x61 and the data
+  uint8_t sum = static_cast<uint8_t>(subcommand & 0xFF) + static_cast<uint8_t>(subcommand >> 8);
+  for (size_t i = 0; i < len; ++i)
+    sum += data[i];
+  const uint8_t tail[2] = {static_cast<uint8_t>(~sum), static_cast<uint8_t>(4 + len)};
+  return this->write_block_(BQ76972_REG_CHECKSUM, tail, 2);
+}
+
+bool BQ76972Component::enter_cfg_update_() {
+  if (!this->write_subcommand_(BQ76972_SUBCMD_ENTER_CFG_UPDATE, nullptr, 0))
+    return false;
+  delay(10);
+  return this->wait_for_cfgupdate_();
+}
+
+bool BQ76972Component::exit_cfg_update_() {
+  return this->write_subcommand_(BQ76972_SUBCMD_EXIT_CFG_UPDATE, nullptr, 0);
+}
+
+bool BQ76972Component::regs_disabled_(bool &out) {
+  uint8_t reg12;
+  uint8_t reg0;
+  if (!this->read_subcommand_(BQ76972_MEM_REG12_CONFIG, &reg12, 1) ||
+      !this->read_subcommand_(BQ76972_MEM_REG0_CONFIG, &reg0, 1))
+    return false;
+  out = reg12 == 0 && (reg0 & 0x01) == 0;
+  return true;
+}
+
+const LogString *BQ76972Component::configure_() {
+  uint16_t internal_temp;
+  if (!this->read_words_(BQ76972_CMD_TEMP_START, &internal_temp, 1))
+    return LOG_STR(ESP_LOG_MSG_COMM_FAIL);
+
+  // Only write the regulator config when it differs, see
+  // https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1583718/bq76972-undocumented-4-minute-config_update-auto-exit-timeout
+  bool regs_disabled = true;
+  if (this->reg_disable_ && !this->regs_disabled_(regs_disabled))
+    return LOG_STR("Reading regulator config failed");
+  const bool write_regs = !regs_disabled;
+
+  bool write_thermistors = false;
+  for (size_t i = 1; i < BQ76972_NUM_TEMPERATURES; i++) {
+    if (i != BQ76972_TS1_INDEX && this->temperature_sensors_[i] != nullptr)
+      write_thermistors = true;
+  }
+
+  if (write_regs || write_thermistors) {
+    if (!this->enter_cfg_update_())
+      return LOG_STR("Entering config update mode failed");
+    const LogString *error = this->write_config_(write_regs);
+    // The chip stops measuring in config update mode, so leave it even after a failed write
+    if (!this->exit_cfg_update_() && error == nullptr)
+      error = LOG_STR("Exiting config update mode failed");
+    if (error != nullptr)
+      return error;
+    if (write_regs && (!this->regs_disabled_(regs_disabled) || !regs_disabled))
+      return LOG_STR("Disabling regulators failed");
+  }
+
+  ESP_LOGD(TAG, "Internal temperature: %.1f°C", raw_to_celsius(internal_temp));
+  return nullptr;
+}
+
+const LogString *BQ76972Component::write_config_(bool write_regs) {
+  if (write_regs) {
+    const uint8_t zero = 0;
+    if (!this->write_subcommand_(BQ76972_MEM_REG12_CONFIG, &zero, 1) ||
+        !this->write_subcommand_(BQ76972_MEM_REG0_CONFIG, &zero, 1))
+      return LOG_STR("Writing regulator config failed");
+  }
+  for (size_t i = 1; i < BQ76972_NUM_TEMPERATURES; i++) {
+    if (i == BQ76972_TS1_INDEX || this->temperature_sensors_[i] == nullptr)
+      continue;
+    if (!this->write_subcommand_(BQ76972_MEM_TEMP_PIN_CONFIG_BASE + i, &BQ76972_PIN_CONFIG_THERMISTOR, 1))
+      return LOG_STR("Writing thermistor pin config failed");
+  }
+  return nullptr;
+}
+
+void BQ76972Component::setup() {
+  if (const LogString *error = this->configure_(); error != nullptr)
+    this->mark_failed(error);
+}
+
+void BQ76972Component::dump_config() {
+  ESP_LOGCONFIG(TAG, "BQ76972:");
+  LOG_I2C_DEVICE(this);
+  LOG_UPDATE_INTERVAL(this);
+  ESP_LOGCONFIG(TAG,
+                "  CRC Mode: %s\n"
+                "  Regulators disabled: %s",
+                this->crc_mode_ ? LOG_STR_LITERAL("Enabled") : LOG_STR_LITERAL("Disabled"), YESNO(this->reg_disable_));
+}
+
+void BQ76972Component::program_i2c_address(uint8_t address) {
+  if (this->is_failed())
+    return;
+  const uint8_t shifted = address << 1;
+  if (!this->enter_cfg_update_()) {
+    this->status_set_warning(LOG_STR("Programming I2C address failed"));
+    return;
+  }
+  // The new address only takes effect with the swap, so after a failed write the chip still answers at the
+  // old one and must still be taken out of config update mode
+  const bool written = this->write_subcommand_(BQ76972_MEM_I2C_ADDRESS, &shifted, 1) &&
+                       this->write_subcommand_(BQ76972_MEM_SWAP_COMM_MODE, nullptr, 0);
+  if (written) {
+    delay(10);
+    this->set_i2c_address(address);
+  }
+  if (!this->exit_cfg_update_() || !written) {
+    this->status_set_warning(LOG_STR("Programming I2C address failed"));
+    return;
+  }
+  ESP_LOGI(TAG, "I2C address set to 0x%02X", address);
+}
+
+template<size_t N> static bool any_set(const std::array<sensor::Sensor *, N> &sensors) {
+  for (auto *sensor : sensors) {
+    if (sensor != nullptr)
+      return true;
+  }
+  return false;
+}
+
+void BQ76972Component::update() {
+  // Each group publishes as soon as its read succeeds, so one failed read does not hold back the others
+  bool ok = true;
+  uint16_t words[BQ76972_NUM_CELLS];
+  if (this->stack_voltage_sensor_ != nullptr) {
+    if (this->read_words_(BQ76972_CMD_STACK_VOLTAGE, words, 1)) {
+      if (words[0] != 0)
+        this->stack_voltage_sensor_->publish_state(words[0] * 0.01f);  // 10 mV units
+    } else {
+      ok = false;
+    }
+  }
+  if (any_set(this->cell_sensors_)) {
+    if (this->read_words_(BQ76972_CMD_CELL_START, words, BQ76972_NUM_CELLS)) {
+      for (size_t i = 0; i < BQ76972_NUM_CELLS; i++) {
+        if (this->cell_sensors_[i] != nullptr && words[i] != 0)
+          this->cell_sensors_[i]->publish_state(words[i] * 0.001f);  // mV
+      }
+    } else {
+      ok = false;
+    }
+  }
+  if (any_set(this->temperature_sensors_)) {
+    if (this->read_words_(BQ76972_CMD_TEMP_START, words, BQ76972_NUM_TEMPERATURES)) {
+      for (size_t i = 0; i < BQ76972_NUM_TEMPERATURES; i++) {
+        if (this->temperature_sensors_[i] != nullptr)
+          this->temperature_sensors_[i]->publish_state(raw_to_celsius(words[i]));
+      }
+    } else {
+      ok = false;
+    }
+  }
+  if (ok) {
+    this->status_clear_warning();
+  } else {
+    this->status_set_warning(LOG_STR(ESP_LOG_MSG_COMM_FAIL));
+  }
+}
+
+}  // namespace esphome::bq76972
@@ -0,0 +1,51 @@
+#pragma once
+
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/i2c/i2c.h"
+#include "esphome/core/component.h"
+
+#include <array>
+
+namespace esphome::bq76972 {
+
+static constexpr size_t BQ76972_NUM_CELLS = 16;
+static constexpr size_t BQ76972_NUM_TEMPERATURES = 10;
+
+class BQ76972Component final : public PollingComponent, public i2c::I2CDevice {
+ public:
+  void setup() override;
+  void update() override;
+  void dump_config() override;
+
+  void set_crc_mode(bool crc_mode) { this->crc_mode_ = crc_mode; }
+  void set_reg_disable(bool reg_disable) { this->reg_disable_ = reg_disable; }
+  void set_stack_voltage_sensor(sensor::Sensor *s) { this->stack_voltage_sensor_ = s; }
+  void set_cell_sensor(sensor::Sensor *s, size_t index) { this->cell_sensors_[index] = s; }
+  void set_temperature_sensor(sensor::Sensor *s, size_t index) { this->temperature_sensors_[index] = s; }
+
+  void program_i2c_address(uint8_t address);
+
+ protected:
+  bool read_block_(uint8_t start_register, uint8_t *data, size_t len);
+  bool write_block_(uint8_t start_register, const uint8_t *data, size_t len);
+  bool read_words_(uint8_t start_register, uint16_t *data, size_t num_words);
+  bool send_subcommand_(uint16_t subcommand);
+  bool read_subcommand_(uint16_t subcommand, uint8_t *data, size_t len);
+  bool write_subcommand_(uint16_t subcommand, const uint8_t *data, size_t len);
+  bool wait_for_subcommand_();
+  bool wait_for_cfgupdate_();
+  bool enter_cfg_update_();
+  bool exit_cfg_update_();
+  bool regs_disabled_(bool &out);
+  const LogString *configure_();
+  const LogString *write_config_(bool write_regs);
+
+  bool reg_disable_{false};
+  bool crc_mode_{false};
+
+  sensor::Sensor *stack_voltage_sensor_{nullptr};
+  std::array<sensor::Sensor *, BQ76972_NUM_CELLS> cell_sensors_{};
+  std::array<sensor::Sensor *, BQ76972_NUM_TEMPERATURES> temperature_sensors_{};
+};
+
+}  // namespace esphome::bq76972
@@ -8,7 +8,7 @@

 namespace esphome::chsc6x {

-static const char *const TAG = "chsc6x.touchscreen";
+ESPHOME_LOG_TAG(TAG, "chsc6x.touchscreen");

 static const uint8_t CHSC6X_REG_STATUS = 0x00;
 static const uint8_t CHSC6X_REG_STATUS_TOUCH = 0x00;
@@ -8,7 +8,7 @@

 namespace esphome::cst816 {

-static const char *const TAG = "cst816.touchscreen";
+ESPHOME_LOG_TAG(TAG, "cst816.touchscreen");

 static const uint8_t REG_STATUS = 0x00;
 static const uint8_t REG_TOUCH_NUM = 0x02;
@@ -8,7 +8,7 @@

 namespace esphome::cst9220 {

-static const char *const TAG = "cst9220.touchscreen";
+ESPHOME_LOG_TAG(TAG, "cst9220.touchscreen");

 // The CST92xx family uses 16-bit (big-endian) register addresses.
 static const uint16_t REG_TOUCH_DATA = 0xD000;  // touch report
@@ -143,6 +143,8 @@ def validate_wakeup_pin(
        processed_pins: list[ConfigType] = [{CONF_PIN: value}]
    else:
        processed_pins = list(value)
+        if not processed_pins:
+            raise cv.Invalid("'wakeup_pin' needs at least one entry")

    for i, pin_config in enumerate(processed_pins):
        # now validate each item
@@ -154,29 +156,34 @@ def validate_wakeup_pin(


 def validate_config(config: ConfigType) -> ConfigType:
-    # right now only BK72XX supports the list format for wakeup pins
-    if CORE.is_bk72xx:
-        if CONF_WAKEUP_PIN_MODE in config:
-            wakeup_pins = config.get(CONF_WAKEUP_PIN, [])
-            if len(wakeup_pins) > 1:
-                raise cv.Invalid(
-                    "You need to remove the global wakeup_pin_mode and define it per pin"
-                )
-            if wakeup_pins:
-                if CONF_WAKEUP_PIN_MODE in wakeup_pins[0]:
-                    raise cv.Invalid(
-                        "Specify wakeup_pin_mode either at the top level under deep_sleep "
-                        "or under the pin entry, not both"
-                    )
-                wakeup_pins[0][CONF_WAKEUP_PIN_MODE] = config.pop(CONF_WAKEUP_PIN_MODE)
-    elif (
-        isinstance(config.get(CONF_WAKEUP_PIN), list)
-        and len(config[CONF_WAKEUP_PIN]) > 1
-    ):
+    wakeup_pins = config.get(CONF_WAKEUP_PIN)
+    has_pin_mode = CONF_WAKEUP_PIN_MODE in config
+    if has_pin_mode and wakeup_pins is None:
        raise cv.Invalid(
-            "Your platform does not support providing multiple entries in wakeup_pin"
+            "'wakeup_pin_mode' requires 'wakeup_pin'", path=[CONF_WAKEUP_PIN_MODE]
        )
-
+    multiple_pins = wakeup_pins is not None and len(wakeup_pins) > 1
+    # wakeup_pin is limited to ESP32 and BK72XX, and only BK72XX accepts a list
+    if not CORE.is_bk72xx:
+        if multiple_pins:
+            raise cv.Invalid(
+                "ESP32 does not support multiple entries for 'wakeup_pin'",
+                path=[CONF_WAKEUP_PIN],
+            )
+    elif has_pin_mode:
+        if multiple_pins:
+            raise cv.Invalid(
+                "Remove the global 'wakeup_pin_mode' and define it per pin",
+                path=[CONF_WAKEUP_PIN_MODE],
+            )
+        if CONF_WAKEUP_PIN_MODE in (pin := wakeup_pins[0]):
+            raise cv.Invalid(
+                "Specify 'wakeup_pin_mode' either at the top level under 'deep_sleep' "
+                "or under the pin entry, not both",
+                path=[CONF_WAKEUP_PIN, 0, CONF_WAKEUP_PIN_MODE],
+            )
+        # Move the global mode into the single pin entry, which to_code() reads
+        pin[CONF_WAKEUP_PIN_MODE] = config.pop(CONF_WAKEUP_PIN_MODE)
    return config


@@ -203,11 +210,11 @@ def _validate_sleep_duration(value: core.TimePeriod) -> core.TimePeriod:
    if CORE.is_bk72xx:
        max_duration = core.TimePeriod(hours=36)
        if value > max_duration:
-            raise cv.Invalid("sleep duration cannot be more than 36 hours on BK72XX")
+            raise cv.Invalid("'sleep_duration' cannot be more than 36 hours on BK72XX")
    elif CORE.using_zephyr:
        max_duration = core.TimePeriod(days=49)
        if value > max_duration:
-            raise cv.Invalid("sleep duration cannot be more than 49 days on Zephyr")
+            raise cv.Invalid("'sleep_duration' cannot be more than 49 days on Zephyr")
    return value


@@ -290,7 +297,10 @@ CONFIG_SCHEMA = cv.All(
                cv.positive_time_period_milliseconds,
                _validate_sleep_duration,
            ),
-            cv.Optional(CONF_WAKEUP_PIN): validate_wakeup_pin,
+            cv.Optional(CONF_WAKEUP_PIN): cv.All(
+                cv.only_on([PLATFORM_ESP32, PLATFORM_BK72XX]),
+                validate_wakeup_pin,
+            ),
            cv.Optional(CONF_WAKEUP_PIN_MODE): cv.All(
                cv.only_on([PLATFORM_ESP32, PLATFORM_BK72XX]),
                cv.enum(WAKEUP_PIN_MODES, upper=True),
@@ -347,11 +357,10 @@ async def to_code(config: ConfigType) -> None:

    if CONF_SLEEP_DURATION in config:
        cg.add(var.set_sleep_duration(config[CONF_SLEEP_DURATION]))
-    if CONF_WAKEUP_PIN in config:
-        pins_as_list = config.get(CONF_WAKEUP_PIN, [])
+    if (wakeup_pins := config.get(CONF_WAKEUP_PIN)) is not None:
        if CORE.is_bk72xx:
-            cg.add(var.init_wakeup_pins(len(pins_as_list)))
-            for item in pins_as_list:
+            cg.add(var.init_wakeup_pins(len(wakeup_pins)))
+            for item in wakeup_pins:
                cg.add(
                    var.add_wakeup_pin(
                        await cg.gpio_pin_expression(item[CONF_PIN]),
@@ -361,7 +370,7 @@ async def to_code(config: ConfigType) -> None:
                    )
                )
        else:
-            pin = await cg.gpio_pin_expression(pins_as_list[0][CONF_PIN])
+            pin = await cg.gpio_pin_expression(wakeup_pins[0][CONF_PIN])
            cg.add(var.set_wakeup_pin(pin))
    if CONF_WAKEUP_PIN_MODE in config:
        cg.add(var.set_wakeup_pin_mode(config[CONF_WAKEUP_PIN_MODE]))
@@ -1,4 +1,6 @@
 #pragma once
+#include <array>
+#include <cstdint>
 #include "esphome/core/color.h"

 namespace esphome::display {
@@ -154,4 +156,54 @@ class ColorUtil {
    return color;
  }
 };
+
+/** Rec.601 luma weights (0.299/0.587/0.114), scaled by 256 */
+static constexpr uint16_t REC601_LUMA_R = 77;
+static constexpr uint16_t REC601_LUMA_G = 150;
+static constexpr uint16_t REC601_LUMA_B = 29;
+
+/** Rec.601 luma of an RGB color, for optimum perceptual brightness */
+constexpr uint8_t rec601_luma(Color color) {
+  return (uint8_t) ((REC601_LUMA_R * color.r + REC601_LUMA_G * color.g + REC601_LUMA_B * color.b + 128u) >> 8);
+}
+
+/** Map an RGB color to a single monochrome bit: 1 = white, 0 = black */
+constexpr uint8_t color_to_mono(Color color) { return rec601_luma(color) >= 128 ? 1 : 0; }
+
+/** color_to_mono() of an RGB565 value as ColorUtil::to_color() reads it, from table lookups instead of a division
+ * per channel.
+ */
+class Rgb565ToMono {
+ public:
+  explicit Rgb565ToMono(ColorOrder order) {
+    // Rec.601 weight of the 5-bit, 6-bit and 5-bit fields, by the channel each one holds in this order
+    uint16_t high = REC601_LUMA_R, middle = REC601_LUMA_G, low = REC601_LUMA_B;
+    if (order == COLOR_ORDER_BGR) {
+      high = REC601_LUMA_B;
+      low = REC601_LUMA_R;
+    } else if (order == COLOR_ORDER_GRB) {
+      high = REC601_LUMA_G;
+      middle = REC601_LUMA_R;
+    }
+    // Each field value scaled to 0..255, then weighted
+    for (unsigned i = 0; i != 32; i++) {
+      this->high_[i] = high * esp_scale(i, 31);
+      this->low_[i] = low * esp_scale(i, 31);
+    }
+    for (unsigned i = 0; i != 64; i++)
+      this->middle_[i] = middle * esp_scale(i, 63);
+  }
+
+  uint8_t operator()(uint16_t value) const {
+    const uint32_t weighted = this->high_[value >> 11] + this->middle_[(value >> 5) & 0x3F] + this->low_[value & 0x1F];
+    return ((weighted + 128u) >> 8) >= 128 ? 1 : 0;
+  }
+
+ protected:
+  // Weighted contribution of each value of each field
+  std::array<uint16_t, 32> high_{};
+  std::array<uint16_t, 64> middle_{};
+  std::array<uint16_t, 32> low_{};
+};
+
 }  // namespace esphome::display
@@ -23,11 +23,18 @@ DEPENDENCIES = ["uart"]

 emontx_ns = cg.esphome_ns.namespace("emontx")
 EmonTx = emontx_ns.class_("EmonTx", cg.Component, uart.UARTDevice)
+LockOnReboot = emontx_ns.enum("LockOnReboot", is_class=True)

 CONF_EMONTX_ID = "emontx_id"
 CONF_TAG_NAME = "tag_name"
 CONF_ON_JSON = "on_json"
 CONF_LOCK_ON_REBOOT = "lock_on_reboot"
+LOCK_ON_REBOOT_AUTO = "auto"
+LOCK_ON_REBOOT_MODES = {
+    LOCK_ON_REBOOT_AUTO: LockOnReboot.LOCK_ON_REBOOT_AUTO,
+    True: LockOnReboot.LOCK_ON_REBOOT_ALWAYS,
+    False: LockOnReboot.LOCK_ON_REBOOT_NEVER,
+}

 DOMAIN = "emontx"

@@ -59,7 +66,9 @@ CONFIG_SCHEMA = (
            cv.GenerateID(): cv.declare_id(EmonTx),
            cv.Optional(CONF_ON_JSON): _synchronous_automation_schema(),
            cv.Optional(CONF_ON_DATA): _synchronous_automation_schema(),
-            cv.Optional(CONF_LOCK_ON_REBOOT, default=False): cv.boolean,
+            cv.Optional(CONF_LOCK_ON_REBOOT, default=LOCK_ON_REBOOT_AUTO): cv.Any(
+                cv.boolean, cv.one_of(LOCK_ON_REBOOT_AUTO, lower=True)
+            ),
        }
    )
    .extend(cv.COMPONENT_SCHEMA)
@@ -135,8 +144,11 @@ async def to_code(config: ConfigType) -> None:
    await uart.register_uart_device(var, config)
    await automation.build_callback_automations(var, config, _CALLBACK_AUTOMATIONS)

-    if config[CONF_LOCK_ON_REBOOT]:
-        cg.add(var.set_lock_on_reboot(True))
+    lock = config[CONF_LOCK_ON_REBOOT]
+    cg.add(var.set_lock_on_reboot(LOCK_ON_REBOOT_MODES[lock]))
+    if lock == LOCK_ON_REBOOT_AUTO:
+        # Locking depends on the firmware version the emonTx reports
+        cg.add_define("USE_EMONTX_VERSION")


 # Action: emontx.send_command
@@ -1,23 +1,91 @@
 #include "emontx.h"
 #include "esphome/core/log.h"
+#include "esphome/core/progmem.h"
 #include "esphome/components/json/json_util.h"

 namespace esphome::emontx {

 ESPHOME_LOG_TAG(TAG, "emontx");

+static constexpr uint32_t UNLOCK_ID = 0;
+// The emonTx joins bytes received while a command is pending into that command, so the next one waits
+static constexpr uint32_t COMMAND_GAP_MS = 250;
+
+#ifdef USE_EMONTX_VERSION
+static constexpr uint32_t VERSION_REQUEST_ID = 1;
+// Without a reply, 'v' is sent again every VERSION_RETRY_FRAMES data lines, VERSION_MAX_ATTEMPTS times in all
+static constexpr uint8_t VERSION_RETRY_FRAMES = 2;
+static constexpr uint8_t VERSION_MAX_ATTEMPTS = 3;
+// Line of the 'v' reply (and of the boot banner) carrying the release, e.g. "  - Version:    v1.1.1"
+static const char VERSION_PREFIX[] PROGMEM = "  - Version:";
+// Every data line starts with the message counter, in JSON or text format
+static const char MSG_JSON_PREFIX[] PROGMEM = "{\"MSG\":";
+static const char MSG_TEXT_PREFIX[] PROGMEM = "MSG:";
+// First firmware with 'emonlock' and 'emonunlock'; older firmware takes them for the bootloader command
+static constexpr uint32_t LOCK_MIN_MAJOR = 1;
+static constexpr uint32_t LOCK_MIN_MINOR = 2;
+
+// True if line starts with the PROGMEM prefix and has more after it
+static bool starts_with(const char *line, size_t len, const char *prefix, size_t prefix_len) {
+  return len > prefix_len && ESPHOME_strncmp_P(line, prefix, prefix_len) == 0;
+}
+
+// Reads the decimal number (up to 9 digits) at pos and moves pos past it; false if there is none
+static bool read_number(const char *&pos, const char *end, uint32_t &value) {
+  const char *start = pos;
+  value = 0;
+  while (pos < end && pos - start < 9 && *pos >= '0' && *pos <= '9')
+    value = value * 10 + (*pos++ - '0');
+  return pos != start;
+}
+
+// True for a release such as "v1.2.0" or "v1.3.0-rc1" from LOCK_MIN_MAJOR.LOCK_MIN_MINOR on
+static bool supports_lock(const char *version, const char *end) {
+  if (version < end && (*version == 'v' || *version == 'V'))
+    version++;
+  uint32_t major;
+  if (!read_number(version, end, major) || version == end || *version != '.')
+    return false;
+  version++;
+  uint32_t minor;
+  if (!read_number(version, end, minor))
+    return false;
+  return major > LOCK_MIN_MAJOR || (major == LOCK_MIN_MAJOR && minor >= LOCK_MIN_MINOR);
+}
+#endif
+
 void EmonTx::setup() {
  this->buffer_pos_ = 0;
-  if (!this->lock_on_reboot_)
+  if (this->lock_on_reboot_ == LockOnReboot::LOCK_ON_REBOOT_ALWAYS) {
+    // The line feed ends any boot noise
+    this->write_byte('\n');
+    this->set_timeout(UNLOCK_ID, COMMAND_GAP_MS, [this]() {
+      this->unlock_();
+#ifdef USE_EMONTX_VERSION
+      if (this->wants_version_())
+        this->request_version_();
+#endif
+    });
    return;
-  // The line feed ends any boot noise first
-  ESP_LOGI(TAG, "Unlocking emonTx after boot");
-  this->write_byte('\n');
+  }
+#ifdef USE_EMONTX_VERSION
+  // With AUTO, the reply decides whether to unlock
+  if (this->wants_version_())
+    this->request_version_();
+#endif
+}
+
+void EmonTx::unlock_() {
+  ESP_LOGI(TAG, "Unlocking emonTx");
  this->send_command("emonunlock");
 }

 void EmonTx::on_shutdown() {
-  if (!this->lock_on_reboot_)
+  bool lock = this->lock_on_reboot_ == LockOnReboot::LOCK_ON_REBOOT_ALWAYS;
+#ifdef USE_EMONTX_VERSION
+  lock |= this->lock_on_reboot_ == LockOnReboot::LOCK_ON_REBOOT_AUTO && this->lock_supported_;
+#endif
+  if (!lock)
    return;
  if (this->is_paused()) {
    ESP_LOGW(TAG, "Not locking emonTx before shutdown, UART is paused");
@@ -48,6 +116,11 @@ void EmonTx::loop() {
    uint8_t dropped;
    while (this->available() > 0 && this->read_byte(&dropped))
      this->discarding_line_ = dropped != '\n';
+#ifdef USE_EMONTX_VERSION
+    // The emonTx may have been flashed, or a request dropped, during the pause
+    if (this->wants_version_())
+      this->request_version_();
+#endif
  }

  // Read all available data to prevent UART buffer overflow
@@ -77,6 +150,12 @@ void EmonTx::loop() {
          ESP_LOGV(TAG, "Line is JSON, parsing...");
          this->parse_json_(this->buffer_.data(), len);
        }
+#ifdef USE_EMONTX_VERSION
+        if (this->wants_version_()) {
+          this->parse_msg_number_(this->buffer_.data(), len);
+          this->parse_version_line_(this->buffer_.data(), len);
+        }
+#endif
      }
    } else if (received == '\r' || this->discarding_line_) {
      // Ignore CR, and the rest of a line that overflowed or was interrupted by a pause
@@ -112,12 +191,91 @@ void EmonTx::parse_json_(const char *data, size_t len) {
  }
 }

+#ifdef USE_EMONTX_VERSION
+void EmonTx::request_version_() {
+  // The firmware may have changed; until the reply, an unknown version gets no lock commands
+  this->lock_supported_ = false;
+  this->version_frames_left_ = VERSION_RETRY_FRAMES * VERSION_MAX_ATTEMPTS;
+  this->send_version_request_();
+}
+
+// The line feed ends any pending input; the reply is picked up in loop() by parse_version_line_()
+void EmonTx::send_version_request_() {
+  if (this->is_paused())
+    return;
+  this->write_byte('\n');
+  this->set_timeout(VERSION_REQUEST_ID, COMMAND_GAP_MS, [this]() { this->send_command("v"); });
+}
+
+void EmonTx::parse_msg_number_(const char *line, size_t len) {
+  const char *pos;
+  if (starts_with(line, len, MSG_JSON_PREFIX, sizeof(MSG_JSON_PREFIX) - 1)) {
+    pos = line + sizeof(MSG_JSON_PREFIX) - 1;
+  } else if (starts_with(line, len, MSG_TEXT_PREFIX, sizeof(MSG_TEXT_PREFIX) - 1)) {
+    pos = line + sizeof(MSG_TEXT_PREFIX) - 1;
+  } else {
+    return;
+  }
+  uint32_t msg_number;
+  if (!read_number(pos, line + len, msg_number))
+    return;
+
+  // MSG restarts at 1 when the emonTx reboots, as it does after a firmware update
+  if (msg_number <= this->last_msg_number_) {
+    this->request_version_();
+  } else if (this->version_frames_left_ > 0) {
+    if (--this->version_frames_left_ == 0) {
+      ESP_LOGW(TAG, "No firmware version from the emonTx, it may still be locked");
+    } else if (this->version_frames_left_ % VERSION_RETRY_FRAMES == 0) {
+      this->send_version_request_();
+    }
+  }
+  this->last_msg_number_ = msg_number;
+}
+
+void EmonTx::parse_version_line_(const char *line, size_t len) {
+  constexpr size_t prefix_len = sizeof(VERSION_PREFIX) - 1;
+  if (!starts_with(line, len, VERSION_PREFIX, prefix_len))
+    return;
+  const char *version = line + prefix_len;
+  const char *end = line + len;
+  while (version < end && *version == ' ')
+    version++;
+  if (version == end)
+    return;
+  ESP_LOGI(TAG, "emonTx firmware version: %.*s", static_cast<int>(end - version), version);
+  this->version_frames_left_ = 0;
+#ifdef USE_EMONTX_VERSION_TEXT_SENSOR
+  if (this->version_text_sensor_ != nullptr)
+    this->version_text_sensor_->publish_state(version, end - version);
+#endif
+
+  bool supported = supports_lock(version, end);
+  if (this->lock_on_reboot_ == LockOnReboot::LOCK_ON_REBOOT_AUTO && supported && !this->unlock_sent_) {
+    // Once the rest of the reply has gone out; a pause drops it, and the version request on resume retries
+    this->set_timeout(UNLOCK_ID, COMMAND_GAP_MS, [this]() {
+      if (this->is_paused())
+        return;
+      this->unlock_();
+      this->unlock_sent_ = true;
+    });
+  }
+  this->lock_supported_ = supported;
+}
+#endif
+
 /**
 * @brief Logs the EmonTx component configuration details.
 */
 void EmonTx::dump_config() {
  ESP_LOGCONFIG(TAG, "EmonTx:");
-  ESP_LOGCONFIG(TAG, "  Lock on reboot: %s", YESNO(this->lock_on_reboot_));
+  const char *lock = LOG_STR_LITERAL("no");
+  if (this->lock_on_reboot_ == LockOnReboot::LOCK_ON_REBOOT_ALWAYS) {
+    lock = LOG_STR_LITERAL("yes");
+  } else if (this->lock_on_reboot_ == LockOnReboot::LOCK_ON_REBOOT_AUTO) {
+    lock = LOG_STR_LITERAL("auto");
+  }
+  ESP_LOGCONFIG(TAG, "  Lock on reboot: %s", lock);

 #ifdef USE_SENSOR
  ESP_LOGCONFIG(TAG, "  Registered sensors: %zu", this->sensors_.size());
@@ -127,6 +285,9 @@ void EmonTx::dump_config() {
 #else
  ESP_LOGCONFIG(TAG, "  Sensor support: DISABLED");
 #endif
+#ifdef USE_EMONTX_VERSION_TEXT_SENSOR
+  LOG_TEXT_SENSOR("  ", "Firmware version", this->version_text_sensor_);
+#endif
 }

 /**
@@ -13,12 +13,21 @@
 #ifdef USE_SENSOR
 #include "esphome/components/sensor/sensor.h"
 #endif
+#ifdef USE_EMONTX_VERSION_TEXT_SENSOR
+#include "esphome/components/text_sensor/text_sensor.h"
+#endif

 namespace esphome::emontx {

 /// Maximum line length in bytes (plus one byte reserved for null terminator)
 static constexpr size_t MAX_LINE_LENGTH = 1024;

+enum class LockOnReboot : uint8_t {
+  LOCK_ON_REBOOT_NEVER,
+  LOCK_ON_REBOOT_ALWAYS,
+  LOCK_ON_REBOOT_AUTO,  // Only when the emonTx reports firmware v1.2.0 or later
+};
+
 /**
 * @class EmonTx
 * @brief Main class for the EmonTx component.
@@ -27,6 +36,9 @@ static constexpr size_t MAX_LINE_LENGTH = 1024;
 * extracts tags and values, and publishes them to registered sensors.
 */
 class EmonTx final : public Component, public uart::UARTDevice {
+#ifdef USE_EMONTX_VERSION_TEXT_SENSOR
+  SUB_TEXT_SENSOR(version)
+#endif
 public:
  EmonTx() = default;

@@ -50,8 +62,8 @@ class EmonTx final : public Component, public uart::UARTDevice {
  bool is_paused() const { return this->paused_.load(std::memory_order_relaxed); }

  /// Lock the emonTx ('emonlock') before a reboot, so serial garbage during the reboot is not taken
-  /// as a command, and unlock it in setup(). Needs emonTx firmware v1.2.0 or later.
-  void set_lock_on_reboot(bool lock_on_reboot) { this->lock_on_reboot_ = lock_on_reboot; }
+  /// as a command, and unlock it after boot. Needs emonTx firmware v1.2.0 or later, which AUTO checks.
+  void set_lock_on_reboot(LockOnReboot lock_on_reboot) { this->lock_on_reboot_ = lock_on_reboot; }

 #ifdef USE_SENSOR
  void init_sensors(size_t count) { this->sensors_.init(count); }
@@ -60,6 +72,20 @@ class EmonTx final : public Component, public uart::UARTDevice {

 protected:
  void parse_json_(const char *data, size_t len);
+  void unlock_();
+#ifdef USE_EMONTX_VERSION
+  bool wants_version_() const {
+#ifdef USE_EMONTX_VERSION_TEXT_SENSOR
+    if (this->version_text_sensor_ != nullptr)
+      return true;
+#endif
+    return this->lock_on_reboot_ == LockOnReboot::LOCK_ON_REBOOT_AUTO;
+  }
+  void request_version_();
+  void send_version_request_();
+  void parse_msg_number_(const char *line, size_t len);
+  void parse_version_line_(const char *line, size_t len);
+#endif

 #ifdef USE_SENSOR
  FixedVector<std::pair<const char *, sensor::Sensor *>> sensors_{};
@@ -69,8 +95,14 @@ class EmonTx final : public Component, public uart::UARTDevice {
  uint16_t buffer_pos_{0};
  std::atomic<bool> paused_{false};
  bool was_paused_{false};
-  bool lock_on_reboot_{false};
+  LockOnReboot lock_on_reboot_{LockOnReboot::LOCK_ON_REBOOT_NEVER};
  bool discarding_line_{false};  // Set after an overflow or a pause until the end of that line
+#ifdef USE_EMONTX_VERSION
+  bool lock_supported_{false};      // The last version reported is v1.2.0 or later
+  bool unlock_sent_{false};         // AUTO has sent 'emonunlock' since boot
+  uint8_t version_frames_left_{0};  // Data lines still to wait for a version reply; 0 when none is owed
+  uint32_t last_msg_number_{0};
+#endif
  std::array<char, MAX_LINE_LENGTH + 1> buffer_{};
 };

@@ -0,0 +1,24 @@
+import esphome.codegen as cg
+from esphome.components import text_sensor
+import esphome.config_validation as cv
+from esphome.const import CONF_VERSION, ENTITY_CATEGORY_DIAGNOSTIC, ICON_CHIP
+from esphome.types import ConfigType
+
+from .. import CONF_EMONTX_ID, EmonTx
+
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(CONF_EMONTX_ID): cv.use_id(EmonTx),
+        cv.Optional(CONF_VERSION): text_sensor.text_sensor_schema(
+            entity_category=ENTITY_CATEGORY_DIAGNOSTIC, icon=ICON_CHIP
+        ),
+    }
+)
+
+
+async def to_code(config: ConfigType) -> None:
+    hub = await cg.get_variable(config[CONF_EMONTX_ID])
+    text_sensors = text_sensor.sub_text_sensors(config)
+    if await text_sensors(CONF_VERSION, hub.set_version_text_sensor) is not None:
+        cg.add_define("USE_EMONTX_VERSION")
+        cg.add_define("USE_EMONTX_VERSION_TEXT_SENSOR")
@@ -2,6 +2,7 @@

 #include <cstdint>
 #include <algorithm>
+#include "esphome/components/display/display_color_utils.h"
 #include "esphome/core/color.h"

 /* Utility for converting internal \a Color RGB representation to supported IC hardware color keys
@@ -13,21 +14,15 @@

 namespace esphome::epaper_spi {

+// The Rec.601 luma helpers and the RGB565 mono lookup live in the shared display utilities, so other
+// drivers (e.g. it8951 in its 1 bit per pixel mode) can use them too.
+using display::color_to_mono;
+using display::rec601_luma;
+using display::Rgb565ToMono;
+
 /** Delta for when to regard as gray */
 static constexpr uint8_t COLORCONV_GRAY_THRESHOLD = 50;

-/** Rec.601 luma (0.299/0.587/0.114 weights, scaled by 256) for optimum perceptual brightness */
-constexpr uint8_t rec601_luma(Color color) {
-  return (uint8_t) ((77u * color.r + 150u * color.g + 29u * color.b + 128u) >> 8);
-}
-
-/** Map RGB color to a single monochrome bit
- *
- * @param color RGB color to convert from
- * @return      1 = white, 0 = black
- */
-constexpr uint8_t color_to_mono(Color color) { return rec601_luma(color) >= 128 ? 1 : 0; }
-
 /** Map RGB color to one of 4 discrete gray levels (2 bits per pixel)
 *
 * @param color RGB color to convert from
@@ -131,9 +131,7 @@ void EPaperBase::update() {
 }

 void EPaperBase::wait_for_idle_(bool should_wait) {
-#if ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_VERBOSE
  this->waiting_for_idle_start_ = millis();
-#endif
  this->waiting_for_idle_ = should_wait;
 }

@@ -156,6 +154,10 @@ void EPaperBase::loop() {
      ESP_LOGV(TAG, "Screen was busy for %u ms", (unsigned) (millis() - this->waiting_for_idle_start_));
 #endif
    } else {
+      if (now - this->waiting_for_idle_start_ > this->busy_timeout_seconds_ * 1000u) {
+        this->abandon_update_();
+        return;
+      }
 #if ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_VERBOSE
      if (now - this->waiting_for_idle_last_print_ >= 1000) {
        ESP_LOGV(TAG, "Waiting for idle in state %s", this->epaper_state_to_string_());
@@ -168,6 +170,20 @@ void EPaperBase::loop() {
  this->process_state_();
 }

+// The busy pin never cleared: give up on this update so later ones are not refused, and make the next one full
+void EPaperBase::abandon_update_() {
+  ESP_LOGE(TAG, "Display stayed busy for %u s in state %s; check the busy pin", (unsigned) this->busy_timeout_seconds_,
+           this->epaper_state_to_string_());
+  this->status_set_warning(LOG_STR("Busy pin timeout"));
+  if (this->state_ == EPaperState::TRANSFER_DATA)
+    this->abort_transfer();
+  // Leave the panel powered down rather than with its high-voltage drivers enabled
+  this->power_off();
+  this->full_update_requested_ = true;
+  this->current_data_index_ = 0;
+  this->set_state_(EPaperState::IDLE);
+}
+
 /**
 * Process the state machine.
 * Typical state sequence:
@@ -242,6 +258,7 @@ void EPaperBase::process_state_() {
      break;
    case EPaperState::DEEP_SLEEP:
      this->deep_sleep();
+      this->status_clear_warning();
      this->set_state_(EPaperState::IDLE);
      ESP_LOGD(TAG, "Display update took %" PRIu32 " ms", millis() - this->update_start_time_);
      break;
@@ -345,6 +362,120 @@ void HOT EPaperBase::draw_pixel_at(int x, int y, Color color) {
  }
 }

+namespace {
+// One source row of an RGB565 block, written into a contiguous 1 bit per pixel buffer. Without SwapAxes the row lies
+// along a buffer row and the bit moves by step; with it the row lies along a bit column and the byte moves by step
+// rows.
+template<bool SwapAxes, bool BigEndianSource>
+void HOT write_rgb565_row(uint8_t *byte, uint8_t mask, int step, size_t row_width, const uint8_t *source, int count,
+                          const Rgb565ToMono &to_mono) {
+  const ptrdiff_t byte_step = SwapAxes ? step * static_cast<ptrdiff_t>(row_width) : 0;
+  for (; count != 0; count--, source += 2) {
+    const uint16_t value = BigEndianSource ? (source[0] << 8) | source[1] : source[0] | (source[1] << 8);
+    if (to_mono(value)) {
+      *byte |= mask;
+    } else {
+      *byte &= ~mask;
+    }
+    if constexpr (SwapAxes) {
+      byte += byte_step;
+    } else if (step > 0) {
+      mask >>= 1;
+      if (mask == 0) {
+        mask = 0x80;
+        byte++;
+      }
+    } else {
+      mask <<= 1;
+      if (mask == 0) {
+        mask = 0x01;
+        byte--;
+      }
+    }
+  }
+}
+}  // namespace
+
+// Each source column maps to one buffer coordinate and each source row to the other, each moving by 1 per pixel, so
+// the visible part of a block and its dirty area are worked out once for the whole block.
+void HOT EPaperBase::draw_rgb565_block_(uint8_t *buffer, int x_start, int y_start, int w, int h, const uint8_t *ptr,
+                                        ColorOrder order, bool big_endian, int x_offset, int y_offset, int x_pad) {
+  const bool swap = this->effective_transform_ & SWAP_XY;
+  const bool mirror_x = this->effective_transform_ & MIRROR_X;
+  const bool mirror_y = this->effective_transform_ & MIRROR_Y;
+  // The buffer axis a source column moves along, and the one a source row moves along
+  const int column_limit = swap ? this->height_ : this->width_;
+  const int row_limit = swap ? this->width_ : this->height_;
+  const bool column_mirrored = swap ? mirror_y : mirror_x;
+  const bool row_mirrored = swap ? mirror_x : mirror_y;
+  const int first_column = std::max(0, -x_start);
+  const int end_column = std::min(w, column_limit - x_start);
+  const int first_row = std::max(0, -y_start);
+  const int end_row = std::min(h, row_limit - y_start);
+  if (first_column >= end_column || first_row >= end_row)
+    return;
+  auto column_to_buffer = [&](int column) {
+    const int u = x_start + column;
+    return column_mirrored ? column_limit - 1 - u : u;
+  };
+  auto row_to_buffer = [&](int row) {
+    const int v = y_start + row;
+    return row_mirrored ? row_limit - 1 - v : v;
+  };
+
+  const int column_low = std::min(column_to_buffer(first_column), column_to_buffer(end_column - 1));
+  const int row_low = std::min(row_to_buffer(first_row), row_to_buffer(end_row - 1));
+  const int columns = end_column - first_column;
+  const int rows = end_row - first_row;
+  const int x_low = swap ? row_low : column_low;
+  const int y_low = swap ? column_low : row_low;
+  const int x_high = x_low + (swap ? rows : columns);
+  const int y_high = y_low + (swap ? columns : rows);
+
+  const Rgb565ToMono to_mono(order);
+  const size_t line_stride = x_offset + w + x_pad;
+  const size_t row_width = this->row_width_;
+  const int step = column_mirrored ? -1 : 1;
+  for (int row = first_row; row != end_row; row++) {
+    const uint8_t *source = ptr + ((y_offset + row) * line_stride + x_offset + first_column) * 2;
+    const int along = column_to_buffer(first_column);
+    const int across = row_to_buffer(row);
+    const int x = swap ? across : along;
+    const int y = swap ? along : across;
+    uint8_t *byte = buffer + y * row_width + x / 8;
+    const uint8_t mask = 0x80u >> (x % 8);
+    if (swap) {
+      if (big_endian) {
+        write_rgb565_row<true, true>(byte, mask, step, row_width, source, columns, to_mono);
+      } else {
+        write_rgb565_row<true, false>(byte, mask, step, row_width, source, columns, to_mono);
+      }
+    } else if (big_endian) {
+      write_rgb565_row<false, true>(byte, mask, step, row_width, source, columns, to_mono);
+    } else {
+      write_rgb565_row<false, false>(byte, mask, step, row_width, source, columns, to_mono);
+    }
+  }
+  this->x_low_ = clamp_at_most(this->x_low_, x_low);
+  this->x_high_ = clamp_at_least(this->x_high_, x_high);
+  this->y_low_ = clamp_at_most(this->y_low_, y_low);
+  this->y_high_ = clamp_at_least(this->y_high_, y_high);
+}
+
+// Writes an RGB565 block of pixels, as LVGL sends them, straight into a 1 bit per pixel buffer that is one block (the
+// usual case): the same result as draw_pixel_at() for each pixel. Anything else goes through draw_pixel_at().
+void HOT EPaperBase::draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, ColorOrder order,
+                                    ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) {
+  size_t contiguous_length;
+  uint8_t *contiguous = this->buffer_.get_span(0, contiguous_length);
+  if (!this->buffer_is_mono() || this->get_clipping().is_set() || bitness != COLOR_BITNESS_565 ||
+      contiguous_length != this->buffer_length_) {
+    Display::draw_pixels_at(x_start, y_start, w, h, ptr, order, bitness, big_endian, x_offset, y_offset, x_pad);
+    return;
+  }
+  this->draw_rgb565_block_(contiguous, x_start, y_start, w, h, ptr, order, big_endian, x_offset, y_offset, x_pad);
+}
+
 void EPaperBase::dump_config() {
  LOG_DISPLAY("", "E-Paper SPI", this);
  ESP_LOGCONFIG(TAG,
@@ -107,6 +107,8 @@ class EPaperBase : public Display,
  int get_width() override { return this->effective_transform_ & SWAP_XY ? this->height_ : this->width_; }
  int get_height() override { return this->effective_transform_ & SWAP_XY ? this->width_ : this->height_; }
  void draw_pixel_at(int x, int y, Color color) override;
+  void draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, ColorOrder order,
+                      ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) override;
  // Make the next update a full one. Applied when that update starts, so one in progress is not affected.
  void request_full_update() { this->full_update_requested_ = true; }
  // True from the start of an update until the display has refreshed and gone back to sleep.
@@ -125,9 +127,14 @@ class EPaperBase : public Display,
  virtual bool initialise(bool partial);
  void send_init_sequence_(const uint8_t *sequence, size_t length);
  void wait_for_idle_(bool should_wait);
+  void abandon_update_();
  bool init_buffer_(size_t buffer_length);
  void update_effective_transform_();
  bool rotate_coordinates_(int &x, int &y);
+  void draw_rgb565_block_(uint8_t *buffer, int x_start, int y_start, int w, int h, const uint8_t *ptr, ColorOrder order,
+                          bool big_endian, int x_offset, int y_offset, int x_pad);
+  // Whether the buffer holds 1 bit per pixel as draw_pixel_at() writes it, so draw_pixels_at() can write it directly
+  virtual bool buffer_is_mono() const { return false; }

  /**
   * Methods that must be implemented by concrete classes to control the display
@@ -137,6 +144,8 @@ class EPaperBase : public Display,
   * @return true if done, false if it should be called next loop
   */
  virtual bool transfer_data() = 0;
+  // Called when an update is abandoned in the middle of transfer_data(), to release anything it left open
+  virtual void abort_transfer() {}
  /**
   * Refresh the screen after data transfer
   */
@@ -187,18 +196,20 @@ class EPaperBase : public Display,
  // point to the pixel past the last one updated, i.e. may range up to width/height.
  uint16_t x_low_{}, y_low_{}, x_high_{}, y_high_{};

+  uint32_t waiting_for_idle_start_{};
 #if ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_VERBOSE
  uint32_t waiting_for_idle_last_print_{};
-  uint32_t waiting_for_idle_start_{};
 #endif
 #if ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_DEBUG
  uint32_t update_start_time_{};
 #endif

  // properties with specific initialisers go last
-  EPaperState state_{EPaperState::IDLE};
  uint32_t reset_duration_{10};
+  // Longer than any panel takes to refresh; past it the busy pin is assumed stuck
+  uint16_t busy_timeout_seconds_{120};
  uint8_t full_update_every_{1};
+  EPaperState state_{EPaperState::IDLE};
 };

 }  // namespace esphome::epaper_spi
@@ -15,6 +15,7 @@ class EPaperMono : public EPaperBase {
  }

 protected:
+  bool buffer_is_mono() const override { return true; }
  void refresh_screen(bool partial) override;
  void power_on() override {}
  void power_off() override{};
@@ -58,7 +58,9 @@ bool HOT EPaperSSD1677::transfer_data() {
  // A full update ignores 0x26, and the copy may not hold a real frame yet (first update after
  // boot): send the new frame to both planes.
  const bool send_copy = this->plane_ == 0 && this->update_count_ != 0;
-  const bool direct = send_copy || this->buffer_is_plane();
+  // A mono buffer already holds the frame as a RAM plane does, so it can be sent as it is; a deeper
+  // buffer (the four-level model) returns false and packs the plane in plane_row().
+  const bool direct = send_copy || this->buffer_is_mono();
  const auto &source = send_copy ? this->sent_ : this->buffer_;
  const size_t row_length = this->plane_row_length_();
  const size_t plane_length = row_length * this->height_;
@@ -34,9 +34,6 @@ class EPaperSSD1677 : public EPaperMono {
  void init_comparison_frame_();
  // Bytes in one row of a RAM plane: 8 pixels per byte, whatever the buffer holds.
  size_t plane_row_length_() const { return (this->width_ + 7) / 8; }
-  // Whether the buffer already holds the frame as a RAM plane does, so it can be sent as it is.
-  // A subclass with a deeper buffer returns false and overrides plane_row().
-  virtual bool buffer_is_plane() const { return true; }
  // Row y of the frame as a RAM plane holds it, 1 bit per pixel with 1 = white.
  virtual void plane_row(size_t y, uint8_t *out);
  bool reset() override;
@@ -38,9 +38,9 @@ class EPaperSSD1677Gray4 : public EPaperSSD1677 {
  void draw_pixel_at(int x, int y, Color color) override;

 protected:
+  bool buffer_is_mono() const override { return false; }
  // A partial update if partial updates are enabled and this is not a full one.
  bool is_partial_push_() const { return this->update_count_ != 0 && this->sent_.is_valid(); }
-  bool buffer_is_plane() const override { return false; }
  void plane_row(size_t y, uint8_t *out) override;
  void refresh_screen(bool partial) override;
  bool transfer_data() override;
@@ -364,6 +364,15 @@ bool HOT EPaperT133A01::transfer_data() {
  return true;
 }

+void EPaperT133A01::abort_transfer() {
+  // A data stream is open, with one of the chip selects held low, whenever transfer_data() has started sending rows
+  if (this->current_data_index_ == 0)
+    return;
+  this->disable();
+  this->cs_pin_->digital_write(true);
+  this->cs1_pin_->digital_write(true);
+}
+
 void EPaperT133A01::dump_config() {
  EPaperBase::dump_config();
  LOG_PIN("  CS Pin: ", this->cs_pin_);
@@ -46,6 +46,7 @@ class EPaperT133A01 : public EPaperBase {
  void deep_sleep() override;

  bool transfer_data() override;
+  void abort_transfer() override;

  /**
   * Send a command (and optional data) selecting one or both controllers.
@@ -37,6 +37,7 @@ class EPaperUC8179 final : public EPaperBase {
  }

 protected:
+  bool buffer_is_mono() const override { return true; }
  bool initialise(bool partial) override;
  bool transfer_data() override;
  void refresh_screen(bool partial) override;
@@ -111,24 +111,36 @@ void ES8388::setup() {
  // Power on ADC, Enable LIN&RIN, Power off MICBIAS, set int1lp to low power mode
  ES8388_ERROR_FAILED(this->write_byte(ES8388_ADCPOWER, 0x09));

-#ifdef USE_SELECT
+#ifdef USE_ES8388_SELECT
  if (this->dac_output_select_ != nullptr) {
-    auto dac_power = this->get_dac_power();
-    if (dac_power.has_value()) {
-      if (this->dac_output_select_->has_index(dac_power.value())) {
-        this->dac_output_select_->publish_state(dac_power.value());
-      } else {
-        ESP_LOGW(TAG, "Unknown DAC output power value: %d", dac_power.value());
+    if (this->dac_output_initial_.has_value()) {
+      const DacOutputLine line = this->dac_output_initial_.value();
+      ES8388_ERROR_FAILED(this->set_dac_output(line));
+      this->dac_output_select_->publish_state(static_cast<size_t>(line));
+    } else {
+      auto dac_power = this->get_dac_power();
+      if (dac_power.has_value()) {
+        if (this->dac_output_select_->has_index(dac_power.value())) {
+          this->dac_output_select_->publish_state(dac_power.value());
+        } else {
+          ESP_LOGW(TAG, "Unknown DAC output power value: %d", dac_power.value());
+        }
      }
    }
  }
  if (this->adc_input_mic_select_ != nullptr) {
-    auto mic_input = this->get_mic_input();
-    if (mic_input.has_value()) {
-      if (this->adc_input_mic_select_->has_index(mic_input.value())) {
-        this->adc_input_mic_select_->publish_state(mic_input.value());
-      } else {
-        ESP_LOGW(TAG, "Unknown ADC input mic value: %d", mic_input.value());
+    if (this->adc_input_mic_initial_.has_value()) {
+      const AdcInputMicLine line = this->adc_input_mic_initial_.value();
+      ES8388_ERROR_FAILED(this->set_adc_input_mic(line));
+      this->adc_input_mic_select_->publish_state(static_cast<size_t>(line));
+    } else {
+      auto mic_input = this->get_mic_input();
+      if (mic_input.has_value()) {
+        if (this->adc_input_mic_select_->has_index(mic_input.value())) {
+          this->adc_input_mic_select_->publish_state(mic_input.value());
+        } else {
+          ESP_LOGW(TAG, "Unknown ADC input mic value: %d", mic_input.value());
+        }
      }
    }
  }
@@ -138,7 +150,7 @@ void ES8388::setup() {
 void ES8388::dump_config() {
  ESP_LOGCONFIG(TAG, "ES8388 Audio Codec:");
  LOG_I2C_DEVICE(this);
-#ifdef USE_SELECT
+#ifdef USE_ES8388_SELECT
  LOG_SELECT("  ", "DacOutputSelect", this->dac_output_select_);
  LOG_SELECT("  ", "ADCInputMicSelect", this->adc_input_mic_select_);
 #endif
@@ -5,7 +5,7 @@
 #include "esphome/components/audio_dac/audio_dac.h"
 #include "esphome/components/i2c/i2c.h"
 #include "esphome/core/component.h"
-#ifdef USE_SELECT
+#ifdef USE_ES8388_SELECT
 #include "esphome/components/select/select.h"
 #endif

@@ -26,7 +26,7 @@ enum AdcInputMicLine : uint8_t {
 };

 class ES8388 final : public audio_dac::AudioDac, public Component, public i2c::I2CDevice {
-#ifdef USE_SELECT
+#ifdef USE_ES8388_SELECT
  SUB_SELECT(dac_output)
  SUB_SELECT(adc_input_mic)
 #endif
@@ -68,11 +68,22 @@ class ES8388 final : public audio_dac::AudioDac, public Component, public i2c::I
  bool set_dac_output(DacOutputLine line);
  bool set_adc_input_mic(AdcInputMicLine line);

+#ifdef USE_ES8388_SELECT
+  /// Line to apply in setup() instead of keeping what the codec reports.
+  void set_dac_output_initial(DacOutputLine line) { this->dac_output_initial_ = line; }
+  void set_adc_input_mic_initial(AdcInputMicLine line) { this->adc_input_mic_initial_ = line; }
+#endif
+
 protected:
  /// @brief Mutes or unmutes the DAC audio out
  /// @param mute_state True to mute, false to unmute
  /// @return True if successful and false otherwise
  bool set_mute_state_(bool mute_state);
+
+#ifdef USE_ES8388_SELECT
+  optional<DacOutputLine> dac_output_initial_{};
+  optional<AdcInputMicLine> adc_input_mic_initial_{};
+#endif
 };

 }  // namespace esphome::es8388
@@ -1,7 +1,11 @@
 import esphome.codegen as cg
 from esphome.components import select
 import esphome.config_validation as cv
-from esphome.const import ENTITY_CATEGORY_CONFIG, ICON_CHIP  # noqa: F401
+from esphome.const import (
+    CONF_INITIAL_OPTION,
+    ENTITY_CATEGORY_CONFIG,
+    ICON_CHIP,  # noqa: F401
+)
 from esphome.types import ConfigType

 from ..audio_dac import CONF_ES8388_ID, ES8388, es8388_ns
@@ -9,6 +13,21 @@ from ..audio_dac import CONF_ES8388_ID, ES8388, es8388_ns
 CONF_DAC_OUTPUT = "dac_output"
 CONF_ADC_INPUT_MIC = "adc_input_mic"

+DacOutputLine = es8388_ns.enum("DacOutputLine")
+DAC_OUTPUT_OPTIONS = {
+    "LINE1": DacOutputLine.DAC_OUTPUT_LINE1,
+    "LINE2": DacOutputLine.DAC_OUTPUT_LINE2,
+    "BOTH": DacOutputLine.DAC_OUTPUT_BOTH,
+}
+DAC_OUTPUT_OPTION_NAMES = list(DAC_OUTPUT_OPTIONS)
+AdcInputMicLine = es8388_ns.enum("AdcInputMicLine")
+ADC_INPUT_MIC_OPTIONS = {
+    "LINE1": AdcInputMicLine.ADC_INPUT_MIC_LINE1,
+    "LINE2": AdcInputMicLine.ADC_INPUT_MIC_LINE2,
+    "DIFFERENCE": AdcInputMicLine.ADC_INPUT_MIC_DIFFERENCE,
+}
+ADC_INPUT_MIC_OPTION_NAMES = list(ADC_INPUT_MIC_OPTIONS)
+
 DacOutputSelect = es8388_ns.class_("DacOutputSelect", select.Select)
 ADCInputMicSelect = es8388_ns.class_("ADCInputMicSelect", select.Select)

@@ -19,24 +38,45 @@ CONFIG_SCHEMA = cv.All(
            DacOutputSelect,
            entity_category=ENTITY_CATEGORY_CONFIG,
            icon=ICON_CHIP,
+        ).extend(
+            {
+                cv.Optional(CONF_INITIAL_OPTION): cv.enum(
+                    DAC_OUTPUT_OPTIONS, upper=True
+                ),
+            }
        ),
        cv.Optional(CONF_ADC_INPUT_MIC): select.select_schema(
            ADCInputMicSelect,
            entity_category=ENTITY_CATEGORY_CONFIG,
            icon=ICON_CHIP,
+        ).extend(
+            {
+                cv.Optional(CONF_INITIAL_OPTION): cv.enum(
+                    ADC_INPUT_MIC_OPTIONS, upper=True
+                ),
+            }
        ),
    }
 )


 async def to_code(config: ConfigType) -> None:
+    cg.add_define("USE_ES8388_SELECT")
    hub = await cg.get_variable(config[CONF_ES8388_ID])
    selects = select.sub_selects(config, parent=hub)
    await selects(
-        CONF_DAC_OUTPUT, hub.set_dac_output_select, options=["LINE1", "LINE2", "BOTH"]
+        CONF_DAC_OUTPUT, hub.set_dac_output_select, options=DAC_OUTPUT_OPTION_NAMES
    )
    await selects(
        CONF_ADC_INPUT_MIC,
        hub.set_adc_input_mic_select,
-        options=["LINE1", "LINE2", "DIFFERENCE"],
+        options=ADC_INPUT_MIC_OPTION_NAMES,
    )
+    if (
+        initial := config.get(CONF_DAC_OUTPUT, {}).get(CONF_INITIAL_OPTION)
+    ) is not None:
+        cg.add(hub.set_dac_output_initial(initial))
+    if (
+        initial := config.get(CONF_ADC_INPUT_MIC, {}).get(CONF_INITIAL_OPTION)
+    ) is not None:
+        cg.add(hub.set_adc_input_mic_initial(initial))
@@ -282,7 +282,7 @@ void ESP32Camera::loop() {
  }
  this->frame_count_++;
  if (now - this->last_log_time_ >= FRAME_LOG_INTERVAL_MS) {
-    ESP_LOGD(TAG, "Received %u images in last %us", this->frame_count_, FRAME_LOG_INTERVAL_MS / 1000);
+    ESP_LOGD(TAG, "Received %u images in last %" PRIu32 "s", this->frame_count_, FRAME_LOG_INTERVAL_MS / 1000);
    this->last_log_time_ = now;
    this->frame_count_ = 0;
  }
@@ -53,10 +53,14 @@ from .const import (
    KEY_SERIAL1_REQUIRED,
    KEY_SERIAL_REQUIRED,
    KEY_WAVEFORM_REQUIRED,
+    PREFERENCES_RTC_EBOOT_WORDS,
+    PREFERENCES_RTC_NORMAL_WORDS,
    THROW_STUBS_HEADER,
+    check_preferences_fit,
    enable_serial,
    enable_serial1,
    esp8266_ns,
+    preferences_flash_words,
 )
 from .gpio import PinInitialState, add_pin_initial_states_array

@@ -467,6 +471,12 @@ async def to_code(config: ConfigType) -> None:
    # Other projects like Tasmota & ESPEasy also use this
    cg.add_build_flag("-DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH")

+    cg.add_define("ESP8266_PREFERENCES_RTC_NORMAL_WORDS", PREFERENCES_RTC_NORMAL_WORDS)
+    cg.add_define("ESP8266_PREFERENCES_RTC_EBOOT_WORDS", PREFERENCES_RTC_EBOOT_WORDS)
+    cg.add_define(
+        "ESP8266_PREFERENCES_FLASH_WORDS",
+        preferences_flash_words(config[CONF_RESTORE_FROM_FLASH]),
+    )
    if config[CONF_RESTORE_FROM_FLASH]:
        cg.add_define("USE_ESP8266_PREFERENCES_FLASH")

@@ -528,6 +538,7 @@ async def to_code(config: ConfigType) -> None:
    CORE.add_job(add_pin_initial_states_array)
    CORE.add_job(finalize_waveform_config)
    CORE.add_job(finalize_serial_config)
+    CORE.add_job(check_preferences_fit)


@coroutine_with_priority(CoroPriority.WORKAROUNDS)
@@ -1,9 +1,13 @@
+import logging
+
 import esphome.codegen as cg

 # Re-exported from the shared definition; here it indexes the BOARDS
 # metadata dicts, whose entries in boards.py spell the literal.
 from esphome.const import KEY_FLASH_SIZE  # noqa: F401  # pylint: disable=unused-import
-from esphome.core import CORE
+from esphome.core import CORE, CoroPriority, EsphomeError, coroutine_with_priority
+
+_LOGGER = logging.getLogger(__name__)

 KEY_ESP8266 = "esp8266"
 KEY_BOARD = "board"
@@ -24,6 +28,87 @@ KEY_LDSCRIPT = "ldscript"
 # Crash-decode tools, resolved once per run by __init__
 KEY_DECODE_TOOLS = "decode_tools"

+# Saved-settings space in 4-byte words; preferences.cpp gets these as defines. A value cannot span the two
+# RTC regions, and the flash store is smaller when only explicit flash preferences use it.
+PREFERENCES_RTC_NORMAL_WORDS = 78
+PREFERENCES_RTC_EBOOT_WORDS = 32
+PREFERENCES_RTC_WORDS = PREFERENCES_RTC_NORMAL_WORDS + PREFERENCES_RTC_EBOOT_WORDS
+PREFERENCES_FLASH_WORDS = 128
+PREFERENCES_FLASH_WORDS_WITHOUT_RESTORE = 64
+KEY_PREFERENCES = "preferences"
+
+
+def preferences_flash_words(restore_from_flash: bool) -> int:
+    """Size of the flash store for this configuration."""
+    return (
+        PREFERENCES_FLASH_WORDS
+        if restore_from_flash
+        else PREFERENCES_FLASH_WORDS_WITHOUT_RESTORE
+    )
+
+
+def preference_words(value_bytes: int) -> int:
+    """Words a saved value takes, checksum word included (rtc_pref_bytes_to_words plus one)."""
+    return (value_bytes + 3) // 4 + 1
+
+
+def reserve_preferences(
+    count: int, value_bytes: int, in_flash: bool | None = None
+) -> None:
+    """Record saved values a component creates; check_preferences_fit() adds them all up.
+
+    in_flash is the value's own storage, as passed to make_preference(); None is the two-argument
+    form, which follows restore_from_flash.
+    """
+    if in_flash is None:
+        in_flash = CORE.config[KEY_ESP8266][CONF_RESTORE_FROM_FLASH]
+    reservations = CORE.data.setdefault(KEY_ESP8266, {}).setdefault(KEY_PREFERENCES, [])
+    reservations.extend([(preference_words(value_bytes), in_flash)] * count)
+
+
+def _rtc_values_can_split(values: list[int]) -> bool:
+    """Whether some order fills the two RTC regions without a value spanning them."""
+    total = sum(values)
+    if total <= PREFERENCES_RTC_NORMAL_WORDS:
+        return True
+    # Bit i of reachable is set when some subset of the values sums to i
+    reachable = 1
+    for words in values:
+        reachable |= reachable << words
+    lowest = max(0, total - PREFERENCES_RTC_EBOOT_WORDS)
+    highest = min(total, PREFERENCES_RTC_NORMAL_WORDS)
+    return any(reachable >> normal & 1 for normal in range(lowest, highest + 1))
+
+
+@coroutine_with_priority(CoroPriority.FINAL)
+async def check_preferences_fit() -> None:
+    """Fail the build when the reserved saved values cannot fit the space preferences.cpp has."""
+    flash_store = preferences_flash_words(
+        CORE.config[KEY_ESP8266][CONF_RESTORE_FROM_FLASH]
+    )
+    reservations = CORE.data[KEY_ESP8266].get(KEY_PREFERENCES, [])
+    flash_words = sum(w for w, in_flash in reservations if in_flash)
+    rtc_values = [w for w, in_flash in reservations if not in_flash]
+    if flash_words > flash_store:
+        raise EsphomeError(
+            f"Saved values need {flash_words} words but the ESP8266 flash store has {flash_store}; "
+            "use fewer or smaller saved values"
+        )
+    if not _rtc_values_can_split(rtc_values):
+        raise EsphomeError(
+            f"Saved values need {sum(rtc_values)} words but ESP8266 RTC memory has {PREFERENCES_RTC_WORDS} in "
+            f"regions of {PREFERENCES_RTC_NORMAL_WORDS} and {PREFERENCES_RTC_EBOOT_WORDS} that a value cannot "
+            "span; use fewer or smaller saved values, or store them in flash"
+        )
+    if sum(rtc_values) > PREFERENCES_RTC_NORMAL_WORDS:
+        _LOGGER.warning(
+            "Saved values reserve %d of %d words of ESP8266 RTC memory; the fit depends on setup order, and "
+            "saved settings that do not reserve are not counted",
+            sum(rtc_values),
+            PREFERENCES_RTC_WORDS,
+        )
+
+
 # esp8266 namespace is already defined by arduino, manually prefix esphome
 esp8266_ns = cg.global_ns.namespace("esphome").namespace("esp8266")

@@ -4,6 +4,7 @@
 #ifdef USE_ESP8266_CRASH_HANDLER

 #include "crash_handler.h"
+#include "rtc_layout.h"
 #include "esphome/core/log.h"

 #include <cinttypes>
@@ -46,11 +47,8 @@ static inline bool IRAM_ATTR is_code_addr(uint32_t val) {
 // Recover the actual code address from a windowed-ABI return address on the stack.
 static inline uint32_t IRAM_ATTR recover_code_addr(uint32_t val) { return (val & XTENSA_ADDR_MASK) | XTENSA_CODE_BASE; }

-// RTC user memory layout for crash backtrace data.
-// User-accessible RTC memory: blocks 64-191 (each block = 4 bytes).
-// We use blocks 174-191 (last 18 blocks, 72 bytes) to minimize conflicts.
+// Crash data lives in the last esphome::esp8266::RTC_CRASH_WORDS of user RTC memory (rtc_layout.h).
 // Store 16 raw candidates, filter to real return addresses at log time.
-static constexpr uint8_t RTC_CRASH_BASE = 174;
 static constexpr size_t MAX_BACKTRACE = 16;

 // Magic word packs sentinel, version, and count into one uint32_t:
@@ -78,7 +76,7 @@ struct RtcCrashData {
  uint32_t backtrace[MAX_BACKTRACE];
  uint32_t epc1;  // Fault PC, used to filter duplicates
 };
-static_assert(sizeof(RtcCrashData) == 72, "RtcCrashData must fit in 18 RTC blocks");
+static_assert(sizeof(RtcCrashData) == esphome::esp8266::RTC_CRASH_WORDS * 4, "RtcCrashData must fill its RTC words");

 namespace esphome::esp8266 {

@@ -129,7 +127,7 @@ static const LogString *get_reset_reason(uint32_t reason) {
 // Returns the number of valid backtrace entries (0 if no data found).
 static uint8_t read_rtc_backtrace(uint32_t *backtrace, size_t max_entries) {
  RtcCrashData rtc_data;
-  if (!system_rtc_mem_read(RTC_CRASH_BASE, &rtc_data, sizeof(rtc_data)))
+  if (!system_rtc_mem_read(esphome::esp8266::RTC_CRASH_BASE, &rtc_data, sizeof(rtc_data)))
    return 0;
  uint32_t magic = rtc_data.magic;
  if ((magic & CRASH_SENTINEL_MASK) != CRASH_SENTINEL || (magic & CRASH_VERSION_MASK) != CRASH_VERSION)
@@ -233,7 +231,7 @@ extern "C" void IRAM_ATTR custom_crash_callback(struct rst_info *rst_info, uint3
  data.epc1 = epc1;
  data.magic = CRASH_SENTINEL | CRASH_VERSION | count;

-  system_rtc_mem_write(RTC_CRASH_BASE, &data, sizeof(data));
+  system_rtc_mem_write(esphome::esp8266::RTC_CRASH_BASE, &data, sizeof(data));
 }

 #endif  // USE_ESP8266_CRASH_HANDLER
@@ -6,6 +6,7 @@ extern "C" {
 }

 #include "preferences.h"
+#include "rtc_layout.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 #include "esphome/core/preferences_rtc.h"
@@ -17,31 +18,26 @@ namespace esphome::esp8266 {
 ESPHOME_LOG_TAG(TAG, "preferences");

 static constexpr uint32_t ESP_RTC_USER_MEM_START = 0x60001200;
-static constexpr uint32_t ESP_RTC_USER_MEM_SIZE_WORDS = 128;
+static constexpr uint32_t ESP_RTC_USER_MEM_SIZE_WORDS = RTC_USER_MEM_WORDS;
 static constexpr uint32_t ESP_RTC_USER_MEM_SIZE_BYTES = ESP_RTC_USER_MEM_SIZE_WORDS * 4;

-// RTC memory layout:
+// RTC memory layout (sizes come from const.py through codegen):
 // - Eboot region:  RTC words 0-31   (reserved, mapped from preference offset 78-109)
 // - Normal region: RTC words 32-109 (mapped from preference offset 0-77)
 // - Crash handler: RTC words 110-127 (reserved for crash_handler.cpp backtrace data)
-static constexpr uint32_t RTC_EBOOT_REGION_WORDS = 32;   // Words 0-31 reserved for eboot
-static constexpr uint32_t RTC_NORMAL_REGION_WORDS = 78;  // Words 32-109 for normal prefs
+static constexpr uint32_t RTC_EBOOT_REGION_WORDS = ESP8266_PREFERENCES_RTC_EBOOT_WORDS;
+static constexpr uint32_t RTC_NORMAL_REGION_WORDS = ESP8266_PREFERENCES_RTC_NORMAL_WORDS;
 static constexpr uint32_t PREF_TOTAL_WORDS = RTC_EBOOT_REGION_WORDS + RTC_NORMAL_REGION_WORDS;  // 110
+static_assert(PREF_TOTAL_WORDS <= RTC_CRASH_BASE - RTC_SYSTEM_USER_BASE,
+              "preference regions overlap the crash handler's RTC words");

 // Maximum preference size in words (limited by uint8_t length_words field)
 static constexpr uint32_t MAX_PREFERENCE_WORDS = 255;

 #define ESP_RTC_USER_MEM ((uint32_t *) ESP_RTC_USER_MEM_START)

-// Flash storage size depends on esp8266 -> restore_from_flash YAML option (default: false).
-// When enabled (USE_ESP8266_PREFERENCES_FLASH), all preferences default to flash and need
-// 128 words (512 bytes). When disabled, only explicit flash prefs use this storage so
-// 64 words (256 bytes) suffices since most preferences go to RTC memory instead.
-#ifdef USE_ESP8266_PREFERENCES_FLASH
-static constexpr uint32_t ESP8266_FLASH_STORAGE_SIZE = 128;
-#else
-static constexpr uint32_t ESP8266_FLASH_STORAGE_SIZE = 64;
-#endif
+// Smaller without restore_from_flash, when only explicit flash preferences live here
+static constexpr uint32_t ESP8266_FLASH_STORAGE_SIZE = ESP8266_PREFERENCES_FLASH_WORDS;

 static uint32_t
    s_flash_storage[ESP8266_FLASH_STORAGE_SIZE];  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
@@ -60,7 +56,7 @@ static inline bool esp_rtc_user_mem_write(uint32_t index, uint32_t value) {
  if (index >= ESP_RTC_USER_MEM_SIZE_WORDS) {
    return false;
  }
-  if (index < 32 && s_prevent_write) {
+  if (index < RTC_EBOOT_REGION_WORDS && s_prevent_write) {
    return false;
  }

@@ -123,7 +119,7 @@ static bool load_from_rtc(size_t offset, uint32_t *data, size_t len) {

 // Maximum buffer for any single preference - bounded by storage sizes.
 // Flash prefs: bounded by ESP8266_FLASH_STORAGE_SIZE (128 or 64 words).
-// RTC prefs: bounded by RTC_NORMAL_REGION_WORDS (96) - a single pref can't span both RTC regions.
+// RTC prefs: bounded by RTC_NORMAL_REGION_WORDS (78) - a single pref can't span both RTC regions.
 static constexpr size_t PREF_MAX_BUFFER_WORDS =
    ESP8266_FLASH_STORAGE_SIZE > RTC_NORMAL_REGION_WORDS ? ESP8266_FLASH_STORAGE_SIZE : RTC_NORMAL_REGION_WORDS;

@@ -180,8 +176,8 @@ ESPPreferenceObject ESP8266Preferences::make_preference(size_t length, uint32_t
  } else {
    uint32_t start = this->current_offset;
    bool in_normal = start < RTC_NORMAL_REGION_WORDS;
-    // Normal: offset 0-95 maps to RTC offset 32-127
-    // Eboot: offset 96-127 maps to RTC offset 0-31
+    // Normal: offset 0-77 maps to RTC offset 32-109
+    // Eboot: offset 78-109 maps to RTC offset 0-31
    if (in_normal && start + total_words > RTC_NORMAL_REGION_WORDS) {
      // start is in normal but end is not -> switch to Eboot
      this->current_offset = start = RTC_NORMAL_REGION_WORDS;
@@ -0,0 +1,18 @@
+#pragma once
+
+#ifdef USE_ESP8266
+
+#include <cstdint>
+
+namespace esphome::esp8266 {
+
+// User RTC memory is system blocks 64-191, one 4-byte word each. preferences.cpp owns the first
+// words, crash_handler.cpp the last; const.py hands preferences.cpp its region sizes.
+static constexpr uint32_t RTC_SYSTEM_USER_BASE = 64;
+static constexpr uint32_t RTC_USER_MEM_WORDS = 128;
+static constexpr uint32_t RTC_CRASH_WORDS = 18;
+static constexpr uint32_t RTC_CRASH_BASE = RTC_SYSTEM_USER_BASE + RTC_USER_MEM_WORDS - RTC_CRASH_WORDS;
+
+}  // namespace esphome::esp8266
+
+#endif  // USE_ESP8266
@@ -3,11 +3,12 @@
 #include "esphome/core/component.h"
 #include "esphome/components/sensor/sensor.h"
 #include "esphome/components/i2c/i2c.h"
+#include "esphome/core/log.h"
 #include <deque>

 namespace esphome::ezo {

-static const char *const TAG = "ezo.sensor";
+ESPHOME_LOG_TAG(TAG, "ezo.sensor");

 enum EzoCommandType : uint8_t {
  EZO_READ = 0,
@@ -330,7 +330,9 @@ async def write_image(
        if byte_order is not None:
            # Check for valid type has already been done in validate_settings
            encoder.set_big_endian(byte_order == "BIG_ENDIAN")
-        pixels = encoder.convert(image.resize((width, height)), path).getdata()
+        pixels = encoder.convert(
+            image.resize((width, height)), path
+        ).get_flattened_data()
        for row in range(height):
            for col in range(width):
                encoder.encode(pixels[row * width + col])
@@ -0,0 +1,2 @@
+CODEOWNERS = ["@tuct"]
+DOMAIN = "filter_lifetime"
@@ -0,0 +1,112 @@
+#include "filter_lifetime.h"
+#include "esphome/core/application.h"
+#include "esphome/core/hal.h"
+#include "esphome/core/log.h"
+
+#include <algorithm>
+#include <cmath>
+
+namespace esphome::filter_lifetime {
+
+ESPHOME_LOG_TAG(TAG, "filter_lifetime");
+
+static constexpr uint32_t SECONDS_PER_HOUR = 3600;
+static constexpr float MINUTES_PER_DAY = 24.0f * 60.0f;
+
+void FilterLifetime::setup() {
+  this->pref_ = this->make_entity_preference<uint32_t>();
+  this->pref_.load(&this->runtime_seconds_);
+  this->last_update_ = millis();
+  this->publish_values_();
+}
+
+void FilterLifetime::update() {
+  const uint32_t now = App.get_loop_component_start_time();
+  const uint32_t elapsed_ms = now - this->last_update_;
+  this->last_update_ = now;
+
+  if (this->get_is_on_()) {
+    float speed = this->get_current_speed_();
+    if (std::isnan(speed))
+      speed = 0.0f;
+    speed = std::clamp(speed, 0.0f, 100.0f);
+    const uint32_t prev_hours = this->runtime_seconds_ / SECONDS_PER_HOUR;
+    this->carry_ms_ += static_cast<uint32_t>(elapsed_ms * (speed / 100.0f));
+    this->runtime_seconds_ += this->carry_ms_ / 1000;
+    this->carry_ms_ %= 1000;
+    // Save once per hour of runtime (and in on_shutdown): every save erases a flash sector on ESP8266.
+    if (this->runtime_seconds_ / SECONDS_PER_HOUR != prev_hours)
+      this->pref_.save(&this->runtime_seconds_);
+    ESP_LOGV(TAG, "Elapsed %" PRIu32 " ms at %.0f%%, runtime %" PRIu32 " s", elapsed_ms, speed, this->runtime_seconds_);
+  }
+  this->publish_values_();
+}
+
+void FilterLifetime::publish_values_() {
+  const float runtime_minutes = this->runtime_seconds_ / 60.0f;
+  const float max_minutes = this->max_lifetime_minutes_;
+  const float remaining_minutes = std::max(0.0f, max_minutes - runtime_minutes);
+  this->publish_state(100.0f * remaining_minutes / max_minutes);
+  if (this->runtime_hours_sensor_ != nullptr)
+    this->runtime_hours_sensor_->publish_state(runtime_minutes / 60.0f);
+  if (this->remaining_days_sensor_ != nullptr)
+    this->remaining_days_sensor_->publish_state(remaining_minutes / MINUTES_PER_DAY);
+}
+
+void FilterLifetime::on_shutdown() { this->pref_.save(&this->runtime_seconds_); }
+
+void FilterLifetime::reset_filter() {
+  this->runtime_seconds_ = 0;
+  this->carry_ms_ = 0;
+  this->pref_.save(&this->runtime_seconds_);
+  this->publish_values_();
+  ESP_LOGI(TAG, "Filter lifetime reset");
+}
+
+bool FilterLifetime::get_is_on_() {
+#ifdef USE_BINARY_SENSOR
+  // Reads false until the sensor first publishes, so nothing accumulates before then.
+  if (this->is_on_sensor_ != nullptr)
+    return this->is_on_sensor_->state;
+#endif
+  if (this->is_on_lambda_ != nullptr)
+    return this->is_on_lambda_();
+  return true;
+}
+
+float FilterLifetime::get_current_speed_() {
+  if (this->current_speed_sensor_ != nullptr)
+    return this->current_speed_sensor_->state;  // NaN before the first publish, treated as 0
+  if (this->current_speed_lambda_ != nullptr)
+    return this->current_speed_lambda_();
+  return 100.0f;
+}
+
+void FilterLifetime::dump_config() {
+  LOG_SENSOR("", "Filter Lifetime", this);
+  ESP_LOGCONFIG(TAG,
+                "  Max lifetime: %" PRIu32 " min (%.1f days)\n"
+                "  Runtime: %.1f h",
+                this->max_lifetime_minutes_, this->max_lifetime_minutes_ / MINUTES_PER_DAY,
+                this->runtime_seconds_ / 3600.0f);
+#ifdef USE_BINARY_SENSOR
+  if (this->is_on_sensor_ != nullptr) {
+    LOG_BINARY_SENSOR("  ", "Is-on sensor", this->is_on_sensor_);
+  } else
+#endif
+  {
+    ESP_LOGCONFIG(TAG, "  Is-on: %s",
+                  this->is_on_lambda_ != nullptr ? LOG_STR_LITERAL("lambda") : LOG_STR_LITERAL("always"));
+  }
+  if (this->current_speed_sensor_ != nullptr) {
+    LOG_SENSOR("  ", "Speed sensor", this->current_speed_sensor_);
+  } else {
+    ESP_LOGCONFIG(TAG, "  Speed: %s",
+                  this->current_speed_lambda_ != nullptr ? LOG_STR_LITERAL("lambda") : LOG_STR_LITERAL("100%"));
+  }
+  LOG_SENSOR("  ", "Runtime hours", this->runtime_hours_sensor_);
+  LOG_SENSOR("  ", "Remaining days", this->remaining_days_sensor_);
+  LOG_UPDATE_INTERVAL(this);
+}
+
+}  // namespace esphome::filter_lifetime
@@ -0,0 +1,50 @@
+#pragma once
+
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/core/component.h"
+#include "esphome/core/defines.h"
+#ifdef USE_BINARY_SENSOR
+#include "esphome/components/binary_sensor/binary_sensor.h"
+#endif
+
+namespace esphome::filter_lifetime {
+
+class FilterLifetime : public sensor::Sensor, public PollingComponent {
+ public:
+  void setup() override;
+  void update() override;
+  void dump_config() override;
+  void on_shutdown() override;
+  void reset_filter();
+
+  void set_max_lifetime(uint32_t minutes) { this->max_lifetime_minutes_ = minutes; }
+  void set_is_on_lambda(bool (*is_on)()) { this->is_on_lambda_ = is_on; }
+#ifdef USE_BINARY_SENSOR
+  void set_is_on_sensor(binary_sensor::BinarySensor *sensor) { this->is_on_sensor_ = sensor; }
+#endif
+  void set_current_speed_lambda(float (*speed)()) { this->current_speed_lambda_ = speed; }
+  void set_current_speed_sensor(sensor::Sensor *sensor) { this->current_speed_sensor_ = sensor; }
+  void set_runtime_hours_sensor(sensor::Sensor *sensor) { this->runtime_hours_sensor_ = sensor; }
+  void set_remaining_days_sensor(sensor::Sensor *sensor) { this->remaining_days_sensor_ = sensor; }
+
+ protected:
+  bool get_is_on_();
+  float get_current_speed_();
+  void publish_values_();
+
+  bool (*is_on_lambda_)(){nullptr};
+  float (*current_speed_lambda_)(){nullptr};
+#ifdef USE_BINARY_SENSOR
+  binary_sensor::BinarySensor *is_on_sensor_{nullptr};
+#endif
+  sensor::Sensor *current_speed_sensor_{nullptr};
+  sensor::Sensor *runtime_hours_sensor_{nullptr};
+  sensor::Sensor *remaining_days_sensor_{nullptr};
+  ESPPreferenceObject pref_;
+  uint32_t max_lifetime_minutes_{0};
+  uint32_t last_update_{0};
+  uint32_t runtime_seconds_{0};  // Speed-weighted running time, persisted
+  uint32_t carry_ms_{0};         // Weighted milliseconds not yet counted as a second
+};
+
+}  // namespace esphome::filter_lifetime
@@ -0,0 +1,94 @@
+from esphome import automation
+import esphome.codegen as cg
+from esphome.components import binary_sensor, sensor
+import esphome.config_validation as cv
+from esphome.const import (
+    DEVICE_CLASS_DURATION,
+    STATE_CLASS_MEASUREMENT,
+    STATE_CLASS_TOTAL_INCREASING,
+    UNIT_HOUR,
+    UNIT_PERCENT,
+)
+from esphome.types import ConfigType
+
+CONF_MAX_LIFETIME = "max_lifetime"
+CONF_IS_ON = "is_on"
+CONF_IS_ON_SENSOR = "is_on_sensor"
+CONF_CURRENT_SPEED = "current_speed"
+CONF_CURRENT_SPEED_SENSOR = "current_speed_sensor"
+CONF_RUNTIME_HOURS = "runtime_hours"
+CONF_REMAINING_DAYS = "remaining_days"
+UNIT_DAY = "d"
+
+filter_lifetime_ns = cg.esphome_ns.namespace("filter_lifetime")
+FilterLifetime = filter_lifetime_ns.class_(
+    "FilterLifetime", sensor.Sensor, cg.PollingComponent
+)
+
+CONFIG_SCHEMA = cv.All(
+    sensor.sensor_schema(
+        FilterLifetime,
+        unit_of_measurement=UNIT_PERCENT,
+        accuracy_decimals=2,
+        icon="mdi:air-filter",
+        state_class=STATE_CLASS_MEASUREMENT,
+    )
+    .extend(
+        {
+            cv.Required(CONF_MAX_LIFETIME): cv.All(
+                cv.positive_time_period_minutes,
+                cv.Range(min=cv.TimePeriod(minutes=1)),
+            ),
+            cv.Optional(CONF_IS_ON): cv.returning_lambda,
+            cv.Optional(CONF_IS_ON_SENSOR): cv.use_id(binary_sensor.BinarySensor),
+            cv.Optional(CONF_CURRENT_SPEED): cv.returning_lambda,
+            cv.Optional(CONF_CURRENT_SPEED_SENSOR): cv.use_id(sensor.Sensor),
+            cv.Optional(CONF_RUNTIME_HOURS): sensor.sensor_schema(
+                unit_of_measurement=UNIT_HOUR,
+                accuracy_decimals=1,
+                device_class=DEVICE_CLASS_DURATION,
+                state_class=STATE_CLASS_TOTAL_INCREASING,
+                icon="mdi:timer-outline",
+            ),
+            cv.Optional(CONF_REMAINING_DAYS): sensor.sensor_schema(
+                unit_of_measurement=UNIT_DAY,
+                accuracy_decimals=0,
+                device_class=DEVICE_CLASS_DURATION,
+                icon="mdi:calendar-clock",
+            ),
+        }
+    )
+    .extend(cv.polling_component_schema("60s")),
+    cv.has_at_most_one_key(CONF_IS_ON, CONF_IS_ON_SENSOR),
+    cv.has_at_most_one_key(CONF_CURRENT_SPEED, CONF_CURRENT_SPEED_SENSOR),
+)
+
+
+async def to_code(config: ConfigType) -> None:
+    var = await sensor.new_sensor(config)
+    await cg.register_component(var, config)
+
+    cg.add(var.set_max_lifetime(config[CONF_MAX_LIFETIME]))
+
+    if (is_on := config.get(CONF_IS_ON)) is not None:
+        cg.add(var.set_is_on_lambda(await cg.templatable(is_on, [], bool)))
+    elif (is_on_sensor := config.get(CONF_IS_ON_SENSOR)) is not None:
+        cg.add(var.set_is_on_sensor(await cg.get_variable(is_on_sensor)))
+
+    if (current_speed := config.get(CONF_CURRENT_SPEED)) is not None:
+        cg.add(
+            var.set_current_speed_lambda(await cg.templatable(current_speed, [], float))
+        )
+    elif (speed_sensor := config.get(CONF_CURRENT_SPEED_SENSOR)) is not None:
+        cg.add(var.set_current_speed_sensor(await cg.get_variable(speed_sensor)))
+
+    sensors = sensor.sub_sensors(config)
+    await sensors(CONF_RUNTIME_HOURS, var.set_runtime_hours_sensor)
+    await sensors(CONF_REMAINING_DAYS, var.set_remaining_days_sensor)
+
+
+automation.register_apply_action(
+    "filter_lifetime.reset_filter",
+    cv.Schema({cv.GenerateID(): cv.use_id(FilterLifetime)}),
+    automation.ApplyCall("reset_filter()"),
+)
@@ -0,0 +1 @@
+DOMAIN = "friedrich"
@@ -0,0 +1,32 @@
+import esphome.codegen as cg
+from esphome.components import climate_ir, remote_base
+import esphome.config_validation as cv
+from esphome.const import CONF_MODEL, CONF_SENSOR
+from esphome.types import ConfigType
+
+AUTO_LOAD = ["climate_ir"]
+CODEOWNERS = ["@rwrozelle"]
+
+friedrich_ns = cg.esphome_ns.namespace("friedrich")
+FriedrichClimate = friedrich_ns.class_("FriedrichClimate", climate_ir.ClimateIR)
+
+Model = friedrich_ns.enum("Model", is_class=True)
+MODELS = {
+    "MW12Y3H": Model.MODEL_MW12Y3H,
+}
+
+CONFIG_SCHEMA = climate_ir.climate_ir_with_receiver_schema(FriedrichClimate).extend(
+    {
+        cv.Optional(CONF_MODEL, default="MW12Y3H"): cv.enum(MODELS, upper=True),
+        # The unit works in Fahrenheit, so a Celsius temperature sensor cannot feed it
+        cv.Optional(CONF_SENSOR): cv.invalid(
+            "'sensor' is not supported by the Friedrich climate component"
+        ),
+    }
+)
+
+
+async def to_code(config: ConfigType) -> None:
+    remote_base.request_protocol("aeha")  # used from C++
+    var = await climate_ir.new_climate_ir(config)
+    cg.add(var.set_model(config[CONF_MODEL]))
@@ -0,0 +1,234 @@
+#include "friedrich.h"
+
+#include <cmath>
+
+#include "esphome/components/remote_base/aeha_protocol.h"
+#include "esphome/core/hal.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
+
+namespace esphome::friedrich {
+// clang-format off
+/*
+* MW12Y3H - Currently the only supported model. Model field is retained to allow future per-model code differentiation.
+* AEHA
+* Byte0  Fixed = 0x00
+* Byte1  Fixed = 0x08
+* Byte2  Fixed = 0x08
+* Byte3  Command: Move Louver = 0x36 Off = 0x40, else Fixed = 0x7F
+* Byte4  Checksum when command, else Fixed = 0x90
+* Byte5  N/A when command, else Fixed = 0x0C
+* Byte6  N/A when command, else Temp(F), add 0x80 for On
+* Byte7  N/A when command, else Mode (Min Heat = 0xD0 and Coil Dry = 0x10 are not exposed)
+* Byte8  N/A when command, else Fan, add 0x08 for Vertical Swing
+* Byte9 N/A when command, else Fixed = 0x00 // not interested
+* Byte10 N/A when command, else Fixed = 0x00 // not interested
+* Byte11 N/A when command, else Fixed = 0x00 // not interested
+* Byte12 N/A when command, else Economy (On = 0x00, Off = 0x04)
+* Byte13 N/A when command, else CheckSum
+*/
+// clang-format on
+ESPHOME_LOG_TAG(TAG, "friedrich");
+
+static constexpr uint8_t TEMP_MIN_NOT_HEAT = 64;
+static constexpr uint8_t TEMP_DEFAULT = 72;
+static constexpr uint8_t STATE_MESSAGE_LENGTH = FriedrichClimate::STATE_MESSAGE_LENGTH;
+static constexpr uint8_t STATE_MESSAGE_LENGTH_UTIL = 5;
+static constexpr uint16_t CARRIER_ADDRESS = 0x28C6;
+static constexpr uint32_t CARRIER_FREQUENCY = 38000;
+
+static constexpr uint8_t BYTE3_POWER_OFF = 0x40;
+static constexpr uint8_t BYTE6_POWER_ON = 0x80;
+static constexpr uint8_t BYTE7_MODE_AUTO = 0x00;
+static constexpr uint8_t BYTE8_FAN_AUTO = 0x00;
+static constexpr uint8_t BYTE8_FAN_SWING = 0x08;
+
+// Every state frame: power on, economy off; bytes 6, 7, 8 and 13 are patched per state
+static constexpr uint8_t STATE_TEMPLATE[STATE_MESSAGE_LENGTH] PROGMEM = {
+    0x00, 0x08, 0x08, 0x7F, 0x90, 0x0C, BYTE6_POWER_ON, BYTE7_MODE_AUTO, BYTE8_FAN_AUTO, 0x00, 0x00, 0x00, 0x04, 0x00};
+// The off command, including its checksum (255 - byte 3)
+static constexpr uint8_t OFF_FRAME[STATE_MESSAGE_LENGTH_UTIL] PROGMEM = {0x00, 0x08, 0x08, BYTE3_POWER_OFF,
+                                                                         255 - BYTE3_POWER_OFF};
+
+struct Code {
+  uint8_t value;  // a climate enum, all of which are uint8_t
+  uint8_t code;
+};
+static constexpr Code MODES[] PROGMEM = {
+    {climate::CLIMATE_MODE_HEAT_COOL, BYTE7_MODE_AUTO},
+    {climate::CLIMATE_MODE_COOL, 0x80},
+    {climate::CLIMATE_MODE_DRY, 0x40},
+    {climate::CLIMATE_MODE_FAN_ONLY, 0xC0},
+    {climate::CLIMATE_MODE_HEAT, 0x20},
+};
+static constexpr Code FANS[] PROGMEM = {
+    {climate::CLIMATE_FAN_AUTO, BYTE8_FAN_AUTO}, {climate::CLIMATE_FAN_HIGH, 0x80},
+    {climate::CLIMATE_FAN_MEDIUM, 0x40},         {climate::CLIMATE_FAN_LOW, 0xC0},
+    {climate::CLIMATE_FAN_QUIET, 0x20},
+};
+
+// The entry whose value (or code) matches key. Entries are copied out of PROGMEM.
+template<size_t N> static optional<Code> find_entry(const Code (&table)[N], uint8_t key, bool match_code) {
+  for (const Code &slot : table) {
+    Code entry;
+    progmem_memcpy(&entry, &slot, sizeof(entry));
+    if ((match_code ? entry.code : entry.value) == key)
+      return entry;
+  }
+  return {};
+}
+
+// The temperature code is the 4-bit reversal of (F - TEMP_MIN) / TEMP_STEP; the mapping is its own inverse.
+static uint8_t reverse_nibble(uint8_t value) { return reverse_bits(value) >> 4; }
+
+static bool matches_template(const uint8_t *data, uint8_t from, uint8_t to) {
+  for (uint8_t i = from; i <= to; i++) {
+    if (data[i] != progmem_read_byte(&STATE_TEMPLATE[i]))
+      return false;
+  }
+  return true;
+}
+
+/*
+ * https://gist.github.com/GeorgeDewar/11171561
+ * 1. Reverse (flip) bytes 6 - 13)
+ * 2. Sum those bytes
+ * 3. (208 - sum) % 256
+ * 4. Reverse (flip) bytes of result
+ */
+static uint8_t checksum_state(const uint8_t *data) {
+  uint8_t sum = 0;
+  for (uint8_t i = 6; i < STATE_MESSAGE_LENGTH - 1; ++i) {
+    sum += reverse_bits(data[i]);
+  }
+  return reverse_bits(static_cast<uint8_t>(208 - sum));
+}
+
+static const LogString *model_to_string(Model model) {
+  switch (model) {
+    case Model::MODEL_MW12Y3H:
+    default:
+      return LOG_STR("MW12Y3H");
+  }
+}
+
+climate::ClimateTraits FriedrichClimate::traits() {
+  auto traits = ClimateIR::traits();
+  traits.set_temperature_unit(TemperatureUnit::FAHRENHEIT);
+  return traits;
+}
+
+void FriedrichClimate::setup() {
+  ClimateIR::setup();
+  // The base class defaults assume Celsius. This also discards a value saved in Celsius by an earlier version.
+  if (std::isnan(this->target_temperature) || this->target_temperature < TEMP_MIN) {
+    this->target_temperature = TEMP_DEFAULT;
+  }
+  this->target_temperature = std::min<float>(this->target_temperature, TEMP_MAX);
+}
+
+void FriedrichClimate::dump_config() {
+  // ClimateIR::dump_config() is not called: it prints the temperature range in Celsius
+  LOG_CLIMATE("", "Friedrich Climate", this);
+  ESP_LOGCONFIG(TAG,
+                "  Temperature range: %u to %u °F\n"
+                "  Model: %s",
+                TEMP_MIN, TEMP_MAX, LOG_STR_ARG(model_to_string(this->model_)));
+}
+
+void FriedrichClimate::transmit_state() {
+  if (this->mode == climate::CLIMATE_MODE_OFF) {
+    this->transmit_off_();
+    return;
+  }
+
+  ESP_LOGV(TAG, "Transmit state");
+
+  // Snap to what the unit accepts (even values, 64°F minimum unless heating) and store it,
+  // so the state published after this call matches the frame sent.
+  const uint8_t effective_min = this->mode == climate::CLIMATE_MODE_HEAT ? TEMP_MIN : TEMP_MIN_NOT_HEAT;
+  uint8_t temperature = (uint8_t) roundf(clamp<float>(this->target_temperature, effective_min, TEMP_MAX));
+  temperature += temperature % 2;
+  this->target_temperature = temperature;
+
+  const auto mode = find_entry(MODES, this->mode, false);
+  const auto fan = find_entry(FANS, this->fan_mode.value_or(climate::CLIMATE_FAN_AUTO), false);
+
+  uint8_t frame[STATE_MESSAGE_LENGTH];
+  progmem_memcpy(frame, STATE_TEMPLATE, sizeof(frame));
+  frame[6] |= reverse_nibble((temperature - TEMP_MIN) / TEMP_STEP);
+  frame[7] = mode.has_value() ? mode->code : BYTE7_MODE_AUTO;
+  frame[8] = fan.has_value() ? fan->code : BYTE8_FAN_AUTO;
+  if (this->swing_mode != climate::CLIMATE_SWING_OFF)
+    frame[8] |= BYTE8_FAN_SWING;
+  frame[STATE_MESSAGE_LENGTH - 1] = checksum_state(frame);
+
+  this->transmit_(frame, sizeof(frame));
+}
+
+void FriedrichClimate::transmit_off_() {
+  ESP_LOGV(TAG, "Transmit off");
+
+  uint8_t frame[STATE_MESSAGE_LENGTH_UTIL];
+  progmem_memcpy(frame, OFF_FRAME, sizeof(frame));
+  this->transmit_(frame, sizeof(frame));
+}
+
+void FriedrichClimate::transmit_(const uint8_t *data, uint8_t len) {
+  ESP_LOGV(TAG, "Transmit message");
+
+  auto transmit = this->transmitter_->transmit();
+  auto *dst = transmit.get_data();
+  dst->set_carrier_frequency(CARRIER_FREQUENCY);
+  remote_base::AEHAProtocol().encode(dst, CARRIER_ADDRESS, data, len);
+  transmit.perform();
+}
+
+bool FriedrichClimate::on_receive(remote_base::RemoteReceiveData src) {
+  ESP_LOGV(TAG, "Received message");
+  const auto odata = remote_base::AEHAProtocol().decode(src);
+  if (!odata.has_value())
+    return false;
+  const auto &d = odata->data;
+  // Other vendors also use AEHA; only accept frames with our address and fixed header bytes.
+  if (odata->address != CARRIER_ADDRESS || d.size() < STATE_MESSAGE_LENGTH_UTIL || !matches_template(d.data(), 0, 2))
+    return false;
+
+  if (d.size() == STATE_MESSAGE_LENGTH_UTIL) {
+    // Not looking for other types of messages
+    if (d[3] != BYTE3_POWER_OFF || d[4] != 255 - d[3])
+      return false;
+    ESP_LOGV(TAG, "Received off message");
+    this->mode = climate::CLIMATE_MODE_OFF;
+    this->publish_state();
+    return true;
+  }
+
+  if (d.size() != STATE_MESSAGE_LENGTH || d[STATE_MESSAGE_LENGTH - 1] != checksum_state(d.data()) ||
+      !matches_template(d.data(), 3, 5))
+    return false;
+
+  // Ignore frames with a mode this component does not expose (e.g. MIN_HEAT, COIL_DRY)
+  const auto mode = find_entry(MODES, d[7], true);
+  if (!mode.has_value()) {
+    ESP_LOGV(TAG, "Ignoring unknown mode 0x%02X", d[7]);
+    return false;
+  }
+  this->mode = static_cast<climate::ClimateMode>(mode->value);
+
+  // State frames always carry the power-on flag in bit 7 (power off is the separate 5-byte frame), so it is
+  // stripped rather than acted on
+  const uint8_t temp_code = d[6] & ~BYTE6_POWER_ON;
+  const uint8_t temp_index = reverse_nibble(temp_code);
+  if (temp_code <= 0x0F && temp_index <= (TEMP_MAX - TEMP_MIN) / TEMP_STEP)
+    this->target_temperature = TEMP_MIN + temp_index * TEMP_STEP;
+
+  this->swing_mode = (d[8] & BYTE8_FAN_SWING) ? climate::CLIMATE_SWING_VERTICAL : climate::CLIMATE_SWING_OFF;
+  const auto fan = find_entry(FANS, d[8] & ~BYTE8_FAN_SWING, true);
+  this->fan_mode = fan.has_value() ? static_cast<climate::ClimateFanMode>(fan->value) : climate::CLIMATE_FAN_AUTO;
+
+  this->publish_state();
+  return true;
+}
+
+}  // namespace esphome::friedrich
@@ -0,0 +1,47 @@
+#pragma once
+
+#include "esphome/components/climate_ir/climate_ir.h"
+
+namespace esphome::friedrich {
+
+// Extension point for other units: add new models here and branch on model_ where they differ.
+// The default must stay MW12Y3H so existing configurations do not change.
+enum class Model : uint8_t {
+  MODEL_MW12Y3H,  // MW12Y3H built from a remote that only provided Fahrenheit
+};
+
+class FriedrichClimate : public climate_ir::ClimateIR {
+ public:
+  // The unit reports temperatures in Fahrenheit (see traits()); the unit only accepts even values.
+  static constexpr uint8_t TEMP_MIN = 60;  // actually 64 for anything but heating
+  static constexpr uint8_t TEMP_MAX = 88;
+  static constexpr uint8_t TEMP_STEP = 2;
+  static constexpr uint8_t STATE_MESSAGE_LENGTH = 14;
+
+  FriedrichClimate()
+      : ClimateIR(TEMP_MIN, TEMP_MAX, TEMP_STEP, true, true,
+                  {climate::CLIMATE_FAN_AUTO, climate::CLIMATE_FAN_HIGH, climate::CLIMATE_FAN_MEDIUM,
+                   climate::CLIMATE_FAN_LOW, climate::CLIMATE_FAN_QUIET},
+                  {climate::CLIMATE_SWING_OFF, climate::CLIMATE_SWING_VERTICAL}) {}
+
+  void set_model(Model model) { this->model_ = model; }
+
+ protected:
+  void setup() override;
+  void dump_config() override;
+  climate::ClimateTraits traits() override;
+  /// Transmit via IR the state of this climate controller.
+  void transmit_state() override;
+  /// Transmit via IR power off command.
+  void transmit_off_();
+
+  /// Parse incoming message
+  bool on_receive(remote_base::RemoteReceiveData src) override;
+
+  /// Transmit message as IR pulses
+  void transmit_(const uint8_t *data, uint8_t len);
+
+  Model model_{Model::MODEL_MW12Y3H};
+};
+
+}  // namespace esphome::friedrich
@@ -0,0 +1,2 @@
+DOMAIN = "haier_tundra"
+CODEOWNERS = ["@fauxpark"]
@@ -0,0 +1,43 @@
+import esphome.codegen as cg
+from esphome.components import button
+import esphome.config_validation as cv
+from esphome.const import CONF_LIGHT
+from esphome.types import ConfigType
+
+from ..climate import HaierTundra, haier_tundra_ns
+
+CODEOWNERS = ["@fauxpark"]
+
+HaierTundraButton = haier_tundra_ns.class_(
+    "HaierTundraButton", button.Button, cg.Component
+)
+ButtonKind = haier_tundra_ns.enum("ButtonKind", is_class=True)
+
+ICON_LED_OUTLINE = "mdi:led-outline"
+ICON_SPRAY_BOTTLE = "mdi:spray-bottle"
+
+CONF_HAIER_TUNDRA_ID = "haier_tundra_id"
+CONF_SELF_CLEAN = "self_clean"
+
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.Required(CONF_HAIER_TUNDRA_ID): cv.use_id(HaierTundra),
+        cv.Optional(CONF_LIGHT): button.button_schema(
+            HaierTundraButton, icon=ICON_LED_OUTLINE
+        ),
+        cv.Optional(CONF_SELF_CLEAN): button.button_schema(
+            HaierTundraButton, icon=ICON_SPRAY_BOTTLE
+        ),
+    }
+)
+
+
+async def to_code(config: ConfigType) -> None:
+    hub = await cg.get_variable(config[CONF_HAIER_TUNDRA_ID])
+    for key, kind in (
+        (CONF_LIGHT, ButtonKind.BUTTON_KIND_LIGHT),
+        (CONF_SELF_CLEAN, ButtonKind.BUTTON_KIND_SELF_CLEAN),
+    ):
+        if (conf := config.get(key)) is not None:
+            var = await button.new_button(conf, hub, kind)
+            await cg.register_component(var, conf)
@@ -0,0 +1,18 @@
+#include "haier_tundra_button.h"
+#include "esphome/core/log.h"
+
+namespace esphome::haier_tundra {
+
+ESPHOME_LOG_TAG(TAG, "haier_tundra.button");
+
+void HaierTundraButton::dump_config() { LOG_BUTTON("", "Haier Tundra Button", this); }
+
+void HaierTundraButton::press_action() {
+  if (this->kind_ == ButtonKind::BUTTON_KIND_LIGHT) {
+    this->parent_->toggle_light();
+  } else {
+    this->parent_->start_self_clean();
+  }
+}
+
+}  // namespace esphome::haier_tundra
@@ -0,0 +1,25 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/button/button.h"
+#include "esphome/components/haier_tundra/haier_tundra.h"
+
+namespace esphome::haier_tundra {
+
+enum class ButtonKind : uint8_t {
+  BUTTON_KIND_LIGHT,
+  BUTTON_KIND_SELF_CLEAN,
+};
+
+class HaierTundraButton final : public button::Button, public Component, public Parented<HaierTundra> {
+ public:
+  HaierTundraButton(HaierTundra *parent, ButtonKind kind) : Parented(parent), kind_(kind) {}
+  void dump_config() override;
+
+ protected:
+  void press_action() override;
+
+  ButtonKind kind_;
+};
+
+}  // namespace esphome::haier_tundra
@@ -0,0 +1,51 @@
+import esphome.codegen as cg
+from esphome.components import climate_ir, remote_base
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_PLATFORM
+import esphome.final_validate as fv
+from esphome.types import ConfigType
+
+AUTO_LOAD = ["climate_ir"]
+
+haier_tundra_ns = cg.esphome_ns.namespace("haier_tundra")
+HaierTundra = haier_tundra_ns.class_("HaierTundra", climate_ir.ClimateIR)
+
+CONF_UNIT = "unit"
+Unit = haier_tundra_ns.enum("Unit")
+UNITS = {
+    "a": Unit.HAIER_HEADER_UNIT_A,
+    "b": Unit.HAIER_HEADER_UNIT_B,
+}
+
+CONFIG_SCHEMA = climate_ir.climate_ir_with_receiver_schema(HaierTundra).extend(
+    {
+        cv.Optional(CONF_UNIT, default="a"): cv.enum(UNITS, lower=True),
+    }
+)
+
+
+def _final_validate_unit(config: ConfigType) -> None:
+    # Each transmitter may drive at most one unit A and one unit B
+    climates = fv.full_config.get()["climate"]
+    seen = set()
+
+    for climate in climates:
+        if CONF_PLATFORM in climate and climate[CONF_PLATFORM] == "haier_tundra":
+            unit_tx_pair = (
+                climate[CONF_UNIT],
+                climate[remote_base.CONF_TRANSMITTER_ID],
+            )
+
+            if unit_tx_pair in seen and climate[CONF_ID] == config[CONF_ID]:
+                raise cv.Invalid(
+                    "Only one of each unit is allowed per transmitter", path=[CONF_UNIT]
+                )
+            seen.add(unit_tx_pair)
+
+
+FINAL_VALIDATE_SCHEMA = _final_validate_unit
+
+
+async def to_code(config: ConfigType) -> None:
+    remote_base.request_protocol("haier")
+    await climate_ir.new_climate_ir(config, config[CONF_UNIT])
@@ -0,0 +1,260 @@
+#include "haier_tundra.h"
+
+namespace esphome::haier_tundra {
+
+// Number of bytes in decoded packet sans checksum
+static constexpr uint8_t HAIER_TUNDRA_FRAME_SIZE = 13;
+
+void HaierTundra::transmit_state() {
+  // Button value does not seem to matter too much except
+  // when toggling light, as it has no bit flag of its own
+  // So in the default case we can simply set it to POWER
+  this->transmit_(HAIER_BUTTON_POWER);
+}
+
+void HaierTundra::transmit_(uint8_t button) {
+  // Force Quiet and Turbo off if we're not in Cool or Heat mode
+  if (this->mode != climate::CLIMATE_MODE_COOL && this->mode != climate::CLIMATE_MODE_HEAT) {
+#ifdef USE_SWITCH
+    if (this->quiet_mode_switch_ != nullptr) {
+      this->quiet_mode_switch_->publish_state(false);
+    }
+    if (this->turbo_mode_switch_ != nullptr) {
+      this->turbo_mode_switch_->publish_state(false);
+    }
+#endif
+
+    this->quiet_mode_ = false;
+    this->turbo_mode_ = false;
+  }
+
+  const uint8_t frame[HAIER_TUNDRA_FRAME_SIZE] = {
+      this->unit_,
+      static_cast<uint8_t>(this->temperature_() << 4 | this->vertical_swing_()),
+      static_cast<uint8_t>(this->horizontal_swing_() << 5),
+      static_cast<uint8_t>(this->health_() << 1),
+      static_cast<uint8_t>(this->power_() << 6),
+      static_cast<uint8_t>(this->fan_speed_() << 5),
+      static_cast<uint8_t>(this->quiet_() << 7 | this->turbo_() << 6),
+      static_cast<uint8_t>(this->operation_mode_() << 5),
+      0x00,
+      0x00,
+      static_cast<uint8_t>((button == HAIER_BUTTON_SELF_CLEAN ? 1 : 0) << 4),
+      0x00,
+      button,
+  };
+
+  auto transmit = this->transmitter_->transmit();
+  remote_base::HaierProtocol().encode(transmit.get_data(), frame, sizeof(frame));
+  transmit.perform();
+}
+
+uint8_t HaierTundra::temperature_() {
+  return (uint8_t) roundf(clamp<float>(this->target_temperature, HAIER_TEMP_MIN, HAIER_TEMP_MAX)) - HAIER_TEMP_MIN;
+}
+
+uint8_t HaierTundra::vertical_swing_() {
+  if (this->mode == climate::CLIMATE_MODE_OFF) {
+    return HAIER_SWING_V_OFF;
+  }
+  switch (this->swing_mode) {
+    case climate::CLIMATE_SWING_VERTICAL:
+    case climate::CLIMATE_SWING_BOTH:
+      return HAIER_SWING_V_AUTO;
+    default:
+      if (this->mode == climate::CLIMATE_MODE_HEAT) {
+        return HAIER_SWING_V_1BOT;
+      }
+      return HAIER_SWING_V_1TOP;  // Cool/Dry/Auto
+  }
+}
+
+uint8_t HaierTundra::horizontal_swing_() {
+  switch (this->swing_mode) {
+    case climate::CLIMATE_SWING_HORIZONTAL:
+    case climate::CLIMATE_SWING_BOTH:
+      return HAIER_SWING_H_AUTO;
+    default:
+      return HAIER_SWING_H_MIDDLE;
+  }
+}
+
+uint8_t HaierTundra::health_() { return this->health_mode_ ? 1 : 0; }
+
+uint8_t HaierTundra::power_() { return this->mode == climate::CLIMATE_MODE_OFF ? 0 : 1; }
+
+uint8_t HaierTundra::fan_speed_() {
+  switch (this->fan_mode.value_or(climate::CLIMATE_FAN_ON)) {
+    case climate::CLIMATE_FAN_LOW:
+      return HAIER_FAN_LOW;
+    case climate::CLIMATE_FAN_MEDIUM:
+      return HAIER_FAN_MED;
+    case climate::CLIMATE_FAN_HIGH:
+      return HAIER_FAN_HIGH;
+    case climate::CLIMATE_FAN_AUTO:
+    default:
+      return HAIER_FAN_AUTO;
+  }
+}
+
+uint8_t HaierTundra::quiet_() { return this->quiet_mode_ ? 1 : 0; }
+
+uint8_t HaierTundra::turbo_() { return this->turbo_mode_ ? 1 : 0; }
+
+uint8_t HaierTundra::operation_mode_() {
+  switch (this->mode) {
+    case climate::CLIMATE_MODE_COOL:
+      return HAIER_MODE_COOL;
+    case climate::CLIMATE_MODE_DRY:
+      return HAIER_MODE_DRY;
+    case climate::CLIMATE_MODE_HEAT:
+      return HAIER_MODE_HEAT;
+    case climate::CLIMATE_MODE_FAN_ONLY:
+      return HAIER_MODE_FAN;
+    case climate::CLIMATE_MODE_HEAT_COOL:
+    default:
+      return HAIER_MODE_AUTO;
+  }
+}
+
+bool HaierTundra::on_receive(remote_base::RemoteReceiveData data) {
+  auto haier = remote_base::HaierProtocol().decode(data);
+  if (haier.has_value()) {
+    return this->on_haier_(*haier);
+  }
+  return false;
+}
+
+bool HaierTundra::on_haier_(const remote_base::HaierData &haier) {
+  // Verify frame length and header
+  if (haier.data.size() != HAIER_TUNDRA_FRAME_SIZE || haier.data[0] != this->unit_) {
+    return false;
+  }
+
+  this->target_temperature = this->get_temperature_(haier.data[1] >> 4);
+  this->swing_mode = this->get_swing_mode_(haier.data[1] & 0xF, haier.data[2] >> 5);
+  this->health_mode_ = haier.data[3] & 0x2;
+  this->mode = this->get_operation_mode_(haier.data[4] & 0x40, haier.data[7] >> 5);
+  this->fan_mode = this->get_fan_speed_(haier.data[5] >> 5);
+  this->quiet_mode_ = haier.data[6] & 0x80;
+  this->turbo_mode_ = haier.data[6] & 0x40;
+
+#ifdef USE_SWITCH
+  if (this->health_mode_switch_ != nullptr) {
+    this->health_mode_switch_->publish_state(this->health_mode_);
+  }
+  if (this->quiet_mode_switch_ != nullptr) {
+    this->quiet_mode_switch_->publish_state(this->quiet_mode_);
+  }
+  if (this->turbo_mode_switch_ != nullptr) {
+    this->turbo_mode_switch_->publish_state(this->turbo_mode_);
+  }
+#endif
+
+  this->publish_state();
+
+  return true;
+}
+
+float HaierTundra::get_temperature_(uint8_t temp) { return temp + HAIER_TEMP_MIN; }
+
+climate::ClimateSwingMode HaierTundra::get_swing_mode_(uint8_t swing_v, uint8_t swing_h) {
+  if (swing_v == HAIER_SWING_V_AUTO) {
+    if (swing_h == HAIER_SWING_H_AUTO) {
+      return climate::CLIMATE_SWING_BOTH;
+    }
+
+    return climate::CLIMATE_SWING_VERTICAL;
+  } else if (swing_h == HAIER_SWING_H_AUTO) {
+    return climate::CLIMATE_SWING_HORIZONTAL;
+  }
+
+  return climate::CLIMATE_SWING_OFF;
+}
+
+climate::ClimateMode HaierTundra::get_operation_mode_(uint8_t power, uint8_t mode) {
+  if (!power) {
+    return climate::CLIMATE_MODE_OFF;
+  }
+
+  switch (mode) {
+    case HAIER_MODE_COOL:
+      return climate::CLIMATE_MODE_COOL;
+    case HAIER_MODE_DRY:
+      return climate::CLIMATE_MODE_DRY;
+    case HAIER_MODE_HEAT:
+      return climate::CLIMATE_MODE_HEAT;
+    case HAIER_MODE_FAN:
+      return climate::CLIMATE_MODE_FAN_ONLY;
+    case HAIER_MODE_AUTO:
+    default:
+      return climate::CLIMATE_MODE_HEAT_COOL;
+  }
+}
+
+climate::ClimateFanMode HaierTundra::get_fan_speed_(uint8_t fan) {
+  switch (fan) {
+    case HAIER_FAN_LOW:
+      return climate::CLIMATE_FAN_LOW;
+    case HAIER_FAN_MED:
+      return climate::CLIMATE_FAN_MEDIUM;
+    case HAIER_FAN_HIGH:
+      return climate::CLIMATE_FAN_HIGH;
+    case HAIER_FAN_AUTO:
+    default:
+      return climate::CLIMATE_FAN_AUTO;
+  }
+}
+
+void HaierTundra::set_health_mode(bool health, bool transmit) {
+  this->health_mode_ = health;
+
+  if (transmit && this->mode != climate::CLIMATE_MODE_OFF) {
+    this->transmit_(HAIER_BUTTON_HEALTH);
+  }
+}
+
+void HaierTundra::set_quiet_mode(bool quiet, bool transmit) {
+  // Quiet & Turbo cannot be enabled at the same time
+  if (quiet) {
+#ifdef USE_SWITCH
+    if (this->turbo_mode_switch_ != nullptr) {
+      this->turbo_mode_switch_->publish_state(false);
+    }
+#endif
+    this->turbo_mode_ = false;
+  }
+
+  this->quiet_mode_ = quiet;
+  if (transmit)
+    this->transmit_(HAIER_BUTTON_TURBO_QUIET);
+}
+
+void HaierTundra::set_turbo_mode(bool turbo, bool transmit) {
+  // Quiet & Turbo cannot be enabled at the same time
+  if (turbo) {
+#ifdef USE_SWITCH
+    if (this->quiet_mode_switch_ != nullptr) {
+      this->quiet_mode_switch_->publish_state(false);
+    }
+#endif
+    this->quiet_mode_ = false;
+  }
+
+  this->turbo_mode_ = turbo;
+  if (transmit)
+    this->transmit_(HAIER_BUTTON_TURBO_QUIET);
+}
+
+void HaierTundra::toggle_light() {
+  if (this->mode != climate::CLIMATE_MODE_OFF) {
+    this->transmit_(HAIER_BUTTON_LIGHT);
+  }
+}
+
+void HaierTundra::start_self_clean() {
+  // Can be started when off
+  this->transmit_(HAIER_BUTTON_SELF_CLEAN);
+}
+
+}  // namespace esphome::haier_tundra
@@ -0,0 +1,139 @@
+#pragma once
+
+#include "esphome/components/climate_ir/climate_ir.h"
+#include "esphome/components/remote_base/haier_protocol.h"
+
+#ifdef USE_SWITCH
+#include "esphome/components/switch/switch.h"
+#endif
+
+namespace esphome::haier_tundra {
+
+// Byte 0 - Header value (Unit ID)
+enum Unit : uint8_t {
+  HAIER_HEADER_UNIT_B = 0x59,
+  HAIER_HEADER_UNIT_A = 0xA6,
+};
+
+// Byte 1[7:4] - Temperature (˚C) 0x0..0xE
+static constexpr uint8_t HAIER_TEMP_MIN = 16;
+static constexpr uint8_t HAIER_TEMP_MAX = 30;
+
+// Byte 1[3:0] - Vertical Swing
+static constexpr uint8_t HAIER_SWING_V_OFF = 0x0;   // Power off value; from Auto, stops at current position
+static constexpr uint8_t HAIER_SWING_V_2TOP = 0x1;  // [|/   ]
+static constexpr uint8_t HAIER_SWING_V_1TOP = 0x2;  // [|    ] (Not available in Heat mode)
+static constexpr uint8_t HAIER_SWING_V_2BOT = 0x3;  // [   //]
+static constexpr uint8_t HAIER_SWING_V_1BOT = 0xA;  // [    /] (Heat mode only)
+static constexpr uint8_t HAIER_SWING_V_AUTO = 0xC;
+
+// Byte 2[7:5] - Horizontal Swing
+static constexpr uint8_t HAIER_SWING_H_MIDDLE = 0x0;        // [ || ]
+static constexpr uint8_t HAIER_SWING_H_LEFT = 0x3;          // [/   ]
+static constexpr uint8_t HAIER_SWING_H_MIDDLE_LEFT = 0x4;   // [ |  ]
+static constexpr uint8_t HAIER_SWING_H_MIDDLE_RIGHT = 0x5;  // [  | ]
+static constexpr uint8_t HAIER_SWING_H_RIGHT = 0x6;         // [   \]
+static constexpr uint8_t HAIER_SWING_H_AUTO = 0x7;          // [/||\]
+
+// Byte 3[7:5] - Timer Mode
+static constexpr uint8_t HAIER_TIMER_MODE_DISABLED = 0x0;
+static constexpr uint8_t HAIER_TIMER_MODE_OFF = 0x1;     // OFF
+static constexpr uint8_t HAIER_TIMER_MODE_ON = 0x2;      // ON
+static constexpr uint8_t HAIER_TIMER_MODE_ON_OFF = 0x4;  // ON → OFF
+static constexpr uint8_t HAIER_TIMER_MODE_OFF_ON = 0x5;  // ON ← OFF
+
+// Byte 3[1] - Health
+// Byte 4[6] - Power
+
+// Byte 5[7:5] - Fan Speed
+static constexpr uint8_t HAIER_FAN_HIGH = 0x1;
+static constexpr uint8_t HAIER_FAN_MED = 0x2;
+static constexpr uint8_t HAIER_FAN_LOW = 0x3;
+static constexpr uint8_t HAIER_FAN_AUTO = 0x5;
+
+// Byte 5[4:0] - Timer Off Hours (0-23) 0x00..0x17
+// Byte 6[7] - Quiet Mode
+// Byte 6[6] - Turbo Mode
+// Byte 6[5:0] - Timer Off Minutes (0-59) 0x00..0x3B
+
+// Byte 7[7:5] - Mode
+static constexpr uint8_t HAIER_MODE_AUTO = 0x0;
+static constexpr uint8_t HAIER_MODE_COOL = 0x1;
+static constexpr uint8_t HAIER_MODE_DRY = 0x2;
+static constexpr uint8_t HAIER_MODE_HEAT = 0x4;
+static constexpr uint8_t HAIER_MODE_FAN = 0x6;
+
+// Byte 7[4:0] - Timer On Hours (0-23) 0x00..0x17
+// Byte 8[7] - Sleep Mode
+// Byte 8[5:0] - Timer On Minutes (0-59) 0x00..0x3B
+// Byte 10[4] - Self Clean
+
+// Byte 12 - Button
+static constexpr uint8_t HAIER_BUTTON_TEMP_UP = 0x00;
+static constexpr uint8_t HAIER_BUTTON_TEMP_DOWN = 0x01;
+static constexpr uint8_t HAIER_BUTTON_SWING_V = 0x02;
+static constexpr uint8_t HAIER_BUTTON_SWING_H = 0x03;
+static constexpr uint8_t HAIER_BUTTON_FAN_SPEED = 0x04;
+static constexpr uint8_t HAIER_BUTTON_POWER = 0x05;
+static constexpr uint8_t HAIER_BUTTON_MODE = 0x06;
+static constexpr uint8_t HAIER_BUTTON_HEALTH = 0x07;
+static constexpr uint8_t HAIER_BUTTON_TURBO_QUIET = 0x08;
+static constexpr uint8_t HAIER_BUTTON_SLEEP = 0x0B;
+static constexpr uint8_t HAIER_BUTTON_TIMER = 0x10;
+static constexpr uint8_t HAIER_BUTTON_LIGHT = 0x15;
+static constexpr uint8_t HAIER_BUTTON_SELF_CLEAN = 0x19;
+
+class HaierTundra final : public climate_ir::ClimateIR {
+ public:
+  explicit HaierTundra(Unit unit)
+      : climate_ir::ClimateIR(HAIER_TEMP_MIN, HAIER_TEMP_MAX, 1.0f, true, true,
+                              {climate::CLIMATE_FAN_AUTO, climate::CLIMATE_FAN_LOW, climate::CLIMATE_FAN_MEDIUM,
+                               climate::CLIMATE_FAN_HIGH},
+                              {climate::CLIMATE_SWING_OFF, climate::CLIMATE_SWING_VERTICAL,
+                               climate::CLIMATE_SWING_HORIZONTAL, climate::CLIMATE_SWING_BOTH}),
+        unit_(unit) {}
+
+#ifdef USE_SWITCH
+  SUB_SWITCH(health_mode);
+  SUB_SWITCH(quiet_mode);
+  SUB_SWITCH(turbo_mode);
+#endif
+
+  void set_health_mode(bool health, bool transmit = true);
+  void set_quiet_mode(bool quiet, bool transmit = true);
+  void set_turbo_mode(bool turbo, bool transmit = true);
+
+  void toggle_light();
+  void start_self_clean();
+
+ protected:
+  // Transmit via IR the state of this climate controller.
+  void transmit_state() override;
+
+  void transmit_(uint8_t button);
+  uint8_t temperature_();
+  uint8_t vertical_swing_();
+  uint8_t horizontal_swing_();
+  uint8_t health_();
+  uint8_t power_();
+  uint8_t fan_speed_();
+  uint8_t quiet_();
+  uint8_t turbo_();
+  uint8_t operation_mode_();
+
+  // Handle received IR Buffer
+  bool on_receive(remote_base::RemoteReceiveData data) override;
+  bool on_haier_(const remote_base::HaierData &haier);
+
+  float get_temperature_(uint8_t temp);
+  climate::ClimateSwingMode get_swing_mode_(uint8_t swing_v, uint8_t swing_h);
+  climate::ClimateMode get_operation_mode_(uint8_t power, uint8_t mode);
+  climate::ClimateFanMode get_fan_speed_(uint8_t fan);
+
+  Unit unit_;
+  bool health_mode_{false};
+  bool quiet_mode_{false};
+  bool turbo_mode_{false};
+};
+
+}  // namespace esphome::haier_tundra
@@ -0,0 +1,60 @@
+import esphome.codegen as cg
+from esphome.components import switch
+import esphome.config_validation as cv
+from esphome.const import DEVICE_CLASS_SWITCH, ENTITY_CATEGORY_CONFIG
+from esphome.types import ConfigType
+
+from ..climate import HaierTundra, haier_tundra_ns
+
+CODEOWNERS = ["@fauxpark"]
+
+HaierTundraSwitch = haier_tundra_ns.class_(
+    "HaierTundraSwitch", switch.Switch, cg.Component
+)
+SwitchKind = haier_tundra_ns.enum("SwitchKind", is_class=True)
+
+ICON_LEAF = "mdi:leaf"
+ICON_ARROW_DOWN_RIGHT = "mdi:arrow-down-right"
+ICON_ARROW_UP_RIGHT_BOLD = "mdi:arrow-up-right-bold"
+
+CONF_HAIER_TUNDRA_ID = "haier_tundra_id"
+CONF_HEALTH_MODE = "health_mode"
+CONF_QUIET_MODE = "quiet_mode"
+CONF_TURBO_MODE = "turbo_mode"
+
+
+def _switch_schema(icon: str) -> cv.Schema:
+    return switch.switch_schema(
+        HaierTundraSwitch,
+        icon=icon,
+        default_restore_mode="RESTORE_DEFAULT_OFF",
+        device_class=DEVICE_CLASS_SWITCH,
+        entity_category=ENTITY_CATEGORY_CONFIG,
+    )
+
+
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.Required(CONF_HAIER_TUNDRA_ID): cv.use_id(HaierTundra),
+        cv.Optional(CONF_HEALTH_MODE): _switch_schema(ICON_LEAF),
+        cv.Optional(CONF_QUIET_MODE): _switch_schema(ICON_ARROW_DOWN_RIGHT),
+        cv.Optional(CONF_TURBO_MODE): _switch_schema(ICON_ARROW_UP_RIGHT_BOLD),
+    }
+)
+
+
+async def to_code(config: ConfigType) -> None:
+    hub = await cg.get_variable(config[CONF_HAIER_TUNDRA_ID])
+    switches = switch.sub_switches(config)
+    if sw := await switches(
+        CONF_HEALTH_MODE, hub.set_health_mode_switch, hub, SwitchKind.SWITCH_KIND_HEALTH
+    ):
+        await cg.register_component(sw, config[CONF_HEALTH_MODE])
+    if sw := await switches(
+        CONF_QUIET_MODE, hub.set_quiet_mode_switch, hub, SwitchKind.SWITCH_KIND_QUIET
+    ):
+        await cg.register_component(sw, config[CONF_QUIET_MODE])
+    if sw := await switches(
+        CONF_TURBO_MODE, hub.set_turbo_mode_switch, hub, SwitchKind.SWITCH_KIND_TURBO
+    ):
+        await cg.register_component(sw, config[CONF_TURBO_MODE])
@@ -0,0 +1,43 @@
+#include "haier_tundra_switch.h"
+#include "esphome/core/log.h"
+
+namespace esphome::haier_tundra {
+
+ESPHOME_LOG_TAG(TAG, "haier_tundra.switch");
+
+void HaierTundraSwitch::setup() {
+  auto initial = this->get_initial_state_with_restore_mode();
+  if (initial.has_value()) {
+    const bool state = initial.value();
+    this->apply_(state, false);
+    this->publish_state(state);
+  }
+}
+
+void HaierTundraSwitch::dump_config() { LOG_SWITCH("", "Haier Tundra Switch", this); }
+
+void HaierTundraSwitch::write_state(bool state) {
+  // Quiet and Turbo can only be turned on in Cool or Heat mode
+  if (state && this->kind_ != SwitchKind::SWITCH_KIND_HEALTH && this->parent_->mode != climate::CLIMATE_MODE_COOL &&
+      this->parent_->mode != climate::CLIMATE_MODE_HEAT) {
+    return;
+  }
+  this->apply_(state, true);
+  this->publish_state(state);
+}
+
+void HaierTundraSwitch::apply_(bool state, bool transmit) {
+  switch (this->kind_) {
+    case SwitchKind::SWITCH_KIND_HEALTH:
+      this->parent_->set_health_mode(state, transmit);
+      break;
+    case SwitchKind::SWITCH_KIND_QUIET:
+      this->parent_->set_quiet_mode(state, transmit);
+      break;
+    case SwitchKind::SWITCH_KIND_TURBO:
+      this->parent_->set_turbo_mode(state, transmit);
+      break;
+  }
+}
+
+}  // namespace esphome::haier_tundra
@@ -0,0 +1,28 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/switch/switch.h"
+#include "esphome/components/haier_tundra/haier_tundra.h"
+
+namespace esphome::haier_tundra {
+
+enum class SwitchKind : uint8_t {
+  SWITCH_KIND_HEALTH,
+  SWITCH_KIND_QUIET,
+  SWITCH_KIND_TURBO,
+};
+
+class HaierTundraSwitch final : public switch_::Switch, public Component, public Parented<HaierTundra> {
+ public:
+  HaierTundraSwitch(HaierTundra *parent, SwitchKind kind) : Parented(parent), kind_(kind) {}
+  void setup() override;
+  void dump_config() override;
+
+ protected:
+  void write_state(bool state) override;
+  void apply_(bool state, bool transmit);
+
+  SwitchKind kind_;
+};
+
+}  // namespace esphome::haier_tundra
@@ -0,0 +1,13 @@
+import esphome.codegen as cg
+from esphome.components import spi
+from esphome.components.motion import MotionComponent
+
+CODEOWNERS = ["@lboue"]
+DOMAIN = "icm20689"
+
+CONF_ICM20689_ID = "icm20689_id"
+#  C++ namespace / class
+icm20689_ns = cg.esphome_ns.namespace("icm20689")
+ICM20689Component = icm20689_ns.class_(
+    "ICM20689Component", MotionComponent, spi.SPIDevice
+)
@@ -0,0 +1,126 @@
+#include "icm20689.h"
+#include "esphome/core/hal.h"
+#include "esphome/core/log.h"
+
+#include <cstddef>
+#include <cstdint>
+
+namespace esphome::icm20689 {
+
+ESPHOME_LOG_TAG(TAG, "icm20689");
+
+namespace {
+
+// Range enum values 0..3 map to full-scale settings of 2x/4x/8x/16x the base range.
+constexpr float accel_scale(uint8_t range) { return (2.0f * (1U << range)) / 32768.0f; }
+
+constexpr float gyro_scale(uint8_t range) { return (250.0f * (1U << range)) / 32768.0f; }
+
+}  // namespace
+
+void ICM20689Component::write_register_(uint8_t reg, uint8_t value) {
+  this->enable();
+  this->write_byte(reg & 0x7F);
+  this->write_byte(value);
+  this->disable();
+}
+
+void ICM20689Component::read_registers_(uint8_t reg, uint8_t *data, size_t len) {
+  this->enable();
+  this->write_byte(reg | ICM20689_READ_BIT);
+  this->read_array(data, len);
+  this->disable();
+}
+
+void ICM20689Component::setup() {
+  MotionComponent::setup();
+
+  this->spi_setup();
+
+  if (!this->spi_is_ready()) {
+    ESP_LOGE(TAG, "SPI device is not ready");
+    this->mark_failed(LOG_STR(ESP_LOG_MSG_COMM_FAIL));
+    return;
+  }
+
+  // Datasheet 4.20: a soft reset must be the first operation after power-up,
+  // before any register initialization. WHO_AM_I is only valid afterwards.
+  this->write_register_(ICM20689_REG_PWR_MGMT_1, ICM20689_SOFT_RESET);
+  delay(100);  // NOLINT
+
+  // The chip comes out of reset in sleep mode: wake it and select the
+  // auto-selected best clock source (required for full gyro performance).
+  this->write_register_(ICM20689_REG_PWR_MGMT_1, ICM20689_CLKSEL_AUTO);
+
+  // USER_CTRL is not writable in sleep mode, so I2C_IF_DIS is set once awake.
+  // Datasheet 6.1: disable the I2C interface when using SPI.
+  this->write_register_(ICM20689_REG_USER_CTRL, ICM20689_I2C_IF_DIS);
+
+  uint8_t who_am_i = 0;
+  this->read_registers_(ICM20689_REG_WHO_AM_I, &who_am_i, 1);
+
+  if (who_am_i != ICM20689_WHO_AM_I_VALUE) {
+    ESP_LOGE(TAG, "Unexpected WHO_AM_I 0x%02X (expected 0x%02X) -- check wiring/CS", who_am_i, ICM20689_WHO_AM_I_VALUE);
+    this->mark_failed(LOG_STR(ESP_LOG_MSG_COMM_FAIL));
+    return;
+  }
+
+  // Allow the sensor to settle after waking from sleep.
+  delay(50);  // NOLINT
+
+  // Configure the accelerometer and gyroscope full-scale ranges.
+  this->write_register_(ICM20689_REG_ACCEL_CONFIG, static_cast<uint8_t>(this->accel_range_) << 3);
+  this->write_register_(ICM20689_REG_GYRO_CONFIG, static_cast<uint8_t>(this->gyro_range_) << 3);
+}
+
+void ICM20689Component::dump_config() {
+  ESP_LOGCONFIG(TAG, "ICM20689 IMU:");
+  LOG_PIN("  CS Pin: ", this->cs_);
+
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "  " ESP_LOG_MSG_COMM_FAIL);
+    return;
+  }
+
+  ESP_LOGCONFIG(TAG, "  Accel range: ±%dg", 2 << static_cast<uint8_t>(this->accel_range_));
+  ESP_LOGCONFIG(TAG, "  Gyro range: ±%d°/s", 250 << static_cast<uint8_t>(this->gyro_range_));
+
+  MotionComponent::dump_config();
+}
+
+bool ICM20689Component::update_data(motion::MotionData &data) {
+  if (this->is_failed())
+    return false;
+
+  const uint8_t accel_range = static_cast<uint8_t>(this->accel_range_);
+  const uint8_t gyro_range = static_cast<uint8_t>(this->gyro_range_);
+
+  // Read one contiguous sample:
+  // 0..5   accelerometer X/Y/Z
+  // 6..7   temperature
+  // 8..13  gyroscope X/Y/Z
+  uint8_t raw_data[14] = {};
+  this->read_registers_(ICM20689_REG_ACCEL_XOUT_H, raw_data, sizeof(raw_data));
+
+  const float accel_factor = accel_scale(accel_range);
+
+  data.acceleration[motion::X_AXIS] = static_cast<int16_t>(encode_uint16(raw_data[0], raw_data[1])) * accel_factor;
+  data.acceleration[motion::Y_AXIS] = static_cast<int16_t>(encode_uint16(raw_data[2], raw_data[3])) * accel_factor;
+  data.acceleration[motion::Z_AXIS] = static_cast<int16_t>(encode_uint16(raw_data[4], raw_data[5])) * accel_factor;
+
+  const float gyro_factor = gyro_scale(gyro_range);
+
+  data.angular_rate[motion::X_AXIS] = static_cast<int16_t>(encode_uint16(raw_data[8], raw_data[9])) * gyro_factor;
+  data.angular_rate[motion::Y_AXIS] = static_cast<int16_t>(encode_uint16(raw_data[10], raw_data[11])) * gyro_factor;
+  data.angular_rate[motion::Z_AXIS] = static_cast<int16_t>(encode_uint16(raw_data[12], raw_data[13])) * gyro_factor;
+
+  if (!this->temperature_callback_.empty()) {
+    // Datasheet formula: temperature (°C) = raw / 326.8 + 25.
+    const float temperature = static_cast<int16_t>(encode_uint16(raw_data[6], raw_data[7])) / 326.8f + 25.0f;
+    this->temperature_callback_.call(temperature);
+  }
+
+  return true;
+}
+
+}  // namespace esphome::icm20689
@@ -0,0 +1,66 @@
+#pragma once
+
+#include "esphome/components/motion/motion_component.h"
+#include "esphome/components/spi/spi.h"
+#include "esphome/core/component.h"
+#include "esphome/core/helpers.h"
+
+namespace esphome::icm20689 {
+
+// Register map
+static constexpr uint8_t ICM20689_REG_WHO_AM_I = 0x75;
+static constexpr uint8_t ICM20689_REG_PWR_MGMT_1 = 0x6B;
+static constexpr uint8_t ICM20689_REG_USER_CTRL = 0x6A;
+static constexpr uint8_t ICM20689_REG_GYRO_CONFIG = 0x1B;
+static constexpr uint8_t ICM20689_REG_ACCEL_CONFIG = 0x1C;
+static constexpr uint8_t ICM20689_REG_ACCEL_XOUT_H = 0x3B;
+static constexpr uint8_t ICM20689_READ_BIT = 0x80;
+static constexpr uint8_t ICM20689_WHO_AM_I_VALUE = 0x98;
+static constexpr uint8_t ICM20689_SOFT_RESET = 0x81;   // PWR_MGMT_1: DEVICE_RESET | CLKSEL=1 (datasheet 4.20)
+static constexpr uint8_t ICM20689_CLKSEL_AUTO = 0x01;  // PWR_MGMT_1: SLEEP=0, CLKSEL=1 (auto-select best clock)
+static constexpr uint8_t ICM20689_I2C_IF_DIS = 0x10;   // USER_CTRL bit 4
+
+// Accelerometer range options: FS_SEL bits [4:3] of ACCEL_CONFIG
+enum ICM20689AccelRange : uint8_t {
+  ICM20689_ACCEL_RANGE_2G = 0x00,
+  ICM20689_ACCEL_RANGE_4G = 0x01,
+  ICM20689_ACCEL_RANGE_8G = 0x02,
+  ICM20689_ACCEL_RANGE_16G = 0x03,
+};
+
+// Gyroscope range options: FS_SEL bits [4:3] of GYRO_CONFIG
+enum ICM20689GyroRange : uint8_t {
+  ICM20689_GYRO_RANGE_250 = 0x00,
+  ICM20689_GYRO_RANGE_500 = 0x01,
+  ICM20689_GYRO_RANGE_1000 = 0x02,
+  ICM20689_GYRO_RANGE_2000 = 0x03,
+};
+
+class ICM20689Component final : public motion::MotionComponent,
+                                public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW,
+                                                      spi::CLOCK_PHASE_LEADING, spi::DATA_RATE_1MHZ> {
+ public:
+  void setup() override;
+  void dump_config() override;
+
+  void set_accel_range(ICM20689AccelRange range) { this->accel_range_ = range; }
+  void set_gyro_range(ICM20689GyroRange range) { this->gyro_range_ = range; }
+
+  template<typename F> void add_temperature_listener(F &&callback) {
+    this->temperature_callback_.add(std::forward<F>(callback));
+  }
+
+ protected:
+  bool update_data(motion::MotionData &data) override;
+
+  void write_register_(uint8_t reg, uint8_t value);
+  // Reads len bytes starting at reg in one CS-low transaction.
+  void read_registers_(uint8_t reg, uint8_t *data, size_t len);
+
+  ICM20689AccelRange accel_range_{ICM20689_ACCEL_RANGE_2G};
+  ICM20689GyroRange gyro_range_{ICM20689_GYRO_RANGE_250};
+
+  LazyCallbackManager<void(float)> temperature_callback_{};
+};
+
+}  // namespace esphome::icm20689
@@ -0,0 +1,56 @@
+import esphome.codegen as cg
+from esphome.components import spi
+from esphome.components.const import CONF_ACCELEROMETER_RANGE, CONF_GYROSCOPE_RANGE
+from esphome.components.motion import motion_schema, new_motion_component
+import esphome.config_validation as cv
+from esphome.types import ConfigType
+
+from . import ICM20689Component, icm20689_ns
+
+DEPENDENCIES = ["spi"]
+
+#  Enum proxies (must match the C++ enum values exactly)
+ICM20689AccelRange = icm20689_ns.enum("ICM20689AccelRange")
+ACCEL_RANGE_OPTIONS = {
+    "2G": ICM20689AccelRange.ICM20689_ACCEL_RANGE_2G,
+    "4G": ICM20689AccelRange.ICM20689_ACCEL_RANGE_4G,
+    "8G": ICM20689AccelRange.ICM20689_ACCEL_RANGE_8G,
+    "16G": ICM20689AccelRange.ICM20689_ACCEL_RANGE_16G,
+}
+
+ICM20689GyroRange = icm20689_ns.enum("ICM20689GyroRange")
+GYRO_RANGE_OPTIONS = {
+    "250DPS": ICM20689GyroRange.ICM20689_GYRO_RANGE_250,
+    "500DPS": ICM20689GyroRange.ICM20689_GYRO_RANGE_500,
+    "1000DPS": ICM20689GyroRange.ICM20689_GYRO_RANGE_1000,
+    "2000DPS": ICM20689GyroRange.ICM20689_GYRO_RANGE_2000,
+}
+
+#  Top-level CONFIG_SCHEMA
+CONFIG_SCHEMA = (
+    motion_schema(ICM20689Component, has_accel=True, has_gyro=True)
+    .extend(
+        {
+            cv.Optional(CONF_ACCELEROMETER_RANGE, default="2G"): cv.enum(
+                ACCEL_RANGE_OPTIONS, upper=True
+            ),
+            cv.Optional(CONF_GYROSCOPE_RANGE, default="250DPS"): cv.enum(
+                GYRO_RANGE_OPTIONS, upper=True
+            ),
+        }
+    )
+    .extend(
+        spi.spi_device_schema(
+            cs_pin_required=True, default_mode="MODE0", default_data_rate="1MHz"
+        )
+    )
+)
+
+
+#  Code generation
+async def to_code(config: ConfigType) -> None:
+    var = await new_motion_component(config)
+    await spi.register_spi_device(var, config)
+
+    cg.add(var.set_accel_range(config[CONF_ACCELEROMETER_RANGE]))
+    cg.add(var.set_gyro_range(config[CONF_GYROSCOPE_RANGE]))
@@ -0,0 +1,42 @@
+#  YAML config keys
+import esphome.codegen as cg
+from esphome.components import sensor
+import esphome.config_validation as cv
+from esphome.const import (
+    CONF_TEMPERATURE,
+    CONF_TYPE,
+    DEVICE_CLASS_TEMPERATURE,
+    ICON_THERMOMETER,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_CELSIUS,
+)
+from esphome.cpp_generator import MockObj
+from esphome.types import ConfigType
+
+from . import CONF_ICM20689_ID, ICM20689Component
+
+AUTO_LOAD = ["icm20689"]
+
+CONFIG_SCHEMA = sensor.sensor_schema(
+    unit_of_measurement=UNIT_CELSIUS,
+    icon=ICON_THERMOMETER,
+    accuracy_decimals=2,
+    state_class=STATE_CLASS_MEASUREMENT,
+    device_class=DEVICE_CLASS_TEMPERATURE,
+).extend(
+    {
+        cv.Optional(CONF_TYPE): cv.one_of(CONF_TEMPERATURE),
+        cv.GenerateID(CONF_ICM20689_ID): cv.use_id(ICM20689Component),
+    }
+)
+
+
+async def to_code(config: ConfigType) -> None:
+    var = await sensor.new_sensor(config)
+    parent = await cg.get_variable(config[CONF_ICM20689_ID])
+    data = MockObj("data")
+    value_lambda = await cg.process_lambda(
+        var.publish_state(data),
+        [(cg.float_, str(data))],
+    )
+    cg.add(parent.add_temperature_listener(value_lambda))
@@ -2,12 +2,13 @@
 #include "esphome/components/spi/spi.h"
 #include "esphome/components/display/display_buffer.h"
 #include "esphome/components/display/display_color_utils.h"
+#include "esphome/core/log.h"
 #include "ili9xxx_defines.h"
 #include "ili9xxx_init.h"

 namespace esphome::ili9xxx {

-static const char *const TAG = "ili9xxx";
+ESPHOME_LOG_TAG(TAG, "ili9xxx");
 const size_t ILI9XXX_TRANSFER_BUFFER_SIZE = 126;  // ensure this is divisible by 6

 enum ILI9XXXColorMode {
@@ -145,13 +145,42 @@ def is_alpha_only(image: Image):
    return all(b.getextrema()[1] == 0 for b in image.split()[:-1])


-class ImageBinary(ImageEncoder):
+class BitPackedEncoder(ImageEncoder):
+    """Packs pixels MSB first, with every row padded to a whole byte."""
+
+    def __init__(
+        self,
+        bpp: int,
+        width: int,
+        height: int,
+        transparency: str,
+        dither: Image.Dither,
+        invert_alpha: bool,
+    ):
+        self.bpp = bpp
+        super().__init__(
+            (width * bpp + 7) // 8, height, transparency, dither, invert_alpha
+        )
+        self.bitno = 0
+
+    def add_bit(self, bit: bool) -> None:
+        if bit:
+            self.data[self.index] |= 0x80 >> self.bitno
+        self.bitno += 1
+        if self.bitno == 8:
+            self.end_row()
+
+    def end_row(self) -> None:
+        if self.bitno != 0:
+            self.bitno = 0
+            self.index += 1
+
+
+class ImageBinary(BitPackedEncoder):
    allow_config = {CONF_OPAQUE, CONF_INVERT_ALPHA, CONF_CHROMA_KEY}

    def __init__(self, width, height, transparency, dither, invert_alpha):
-        self.width8 = (width + 7) // 8
-        super().__init__(self.width8, height, transparency, dither, invert_alpha)
-        self.bitno = 0
+        super().__init__(1, width, height, transparency, dither, invert_alpha)

    def convert(self, image, path):
        if is_alpha_only(image):
@@ -159,22 +188,46 @@ class ImageBinary(ImageEncoder):
        return image.convert("1", dither=self.dither)

    def encode(self, pixel):
-        if self.invert_alpha:
-            pixel = not pixel
-        if pixel:
-            self.data[self.index] |= 0x80 >> (self.bitno % 8)
-        self.bitno += 1
-        if self.bitno == 8:
-            self.bitno = 0
-            self.index += 1
+        self.add_bit(bool(pixel) != self.invert_alpha)

-    def end_row(self):
-        """
-        Pad rows to a byte boundary
-        """
-        if self.bitno != 0:
-            self.bitno = 0
-            self.index += 1
+
+# The eight colours one bit per channel can express, for dithering.
+_RGB111_PALETTE = Image.new("P", (1, 1))
+_RGB111_PALETTE.putpalette([255 * int(x) for i in range(8) for x in f"{i:03b}"])
+
+
+class ImageRGB111(BitPackedEncoder):
+    allow_config = {CONF_OPAQUE, CONF_ALPHA_CHANNEL}
+
+    def __init__(
+        self,
+        width: int,
+        height: int,
+        transparency: str,
+        dither: Image.Dither,
+        invert_alpha: bool,
+    ):
+        bpp = 4 if transparency == CONF_ALPHA_CHANNEL else 3
+        super().__init__(bpp, width, height, transparency, dither, invert_alpha)
+
+    def convert(self, image: Image, path: str):
+        image = image.convert("RGBA")
+        if self.dither != Image.Dither.FLOYDSTEINBERG:
+            return image
+        alpha = image.getchannel("A")
+        image = image.convert("RGB").quantize(
+            palette=_RGB111_PALETTE, dither=Image.Dither.FLOYDSTEINBERG
+        )
+        image = image.convert("RGB")
+        image.putalpha(alpha)
+        return image
+
+    def encode(self, pixel: tuple[int, int, int, int]):
+        r, g, b, a = pixel
+        if self.invert_alpha:
+            a ^= 0xFF
+        for channel in (r, g, b, a)[: self.bpp]:
+            self.add_bit(channel > 127)


 class ImageGrayscale(ImageEncoder):
@@ -315,6 +368,7 @@ class ReplaceWith:
 IMAGE_TYPE = {
    "BINARY": ImageBinary,
    "GRAYSCALE": ImageGrayscale,
+    "RGB111": ImageRGB111,
    "RGB565": ImageRGB565,
    "RGB": ImageRGB,
    "TRANSPARENT_BINARY": ReplaceWith("'type: BINARY' and 'transparency: chroma_key'"),
@@ -3,6 +3,8 @@
 #include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"

+ESPHOME_LOG_TAG(TAG, "image");
+
 namespace esphome::image {

 void Image::draw(int x, int y, display::Display *display, Color color_on, Color color_off) {
@@ -36,6 +38,17 @@ void Image::draw(int x, int y, display::Display *display, Color color_on, Color
      }
      break;
    }
+    case IMAGE_TYPE_RGB111: {
+      for (int img_x = img_x0; img_x < w; img_x++) {
+        for (int img_y = img_y0; img_y < h; img_y++) {
+          auto color = this->get_rgb111_pixel_(img_x, img_y);
+          if (color.w >= 0x80) {
+            display->draw_pixel_at(x + img_x, y + img_y, color);
+          }
+        }
+      }
+      break;
+    }
    case IMAGE_TYPE_GRAYSCALE:
      for (int img_x = img_x0; img_x < w; img_x++) {
        for (int img_y = img_y0; img_y < h; img_y++) {
@@ -91,6 +104,8 @@ Color Image::get_pixel(int x, int y, const Color color_on, const Color color_off
      if (this->get_binary_pixel_(x, y))
        return color_on;
      return color_off;
+    case IMAGE_TYPE_RGB111:
+      return this->get_rgb111_pixel_(x, y);
    case IMAGE_TYPE_GRAYSCALE:
      return this->get_grayscale_pixel_(x, y);
    case IMAGE_TYPE_RGB565:
@@ -120,6 +135,10 @@ lv_image_dsc_t *Image::get_lv_image_dsc() {
        this->dsc_.header.cf = LV_COLOR_FORMAT_A8;
        break;

+      case IMAGE_TYPE_RGB111:
+        // Rejected by the lvgl config validation
+        ESP_LOGE(TAG, "RGB111 images are not supported in LVGL.");
+        break;
      case IMAGE_TYPE_RGB:
        switch (this->transparency_) {
          case TRANSPARENCY_ALPHA_CHANNEL:
@@ -152,6 +171,19 @@ bool Image::get_binary_pixel_(int x, int y) const {
  const uint32_t pos = x + y * width_8;
  return progmem_read_byte(this->data_start_ + (pos / 8u)) & (0x80 >> (pos % 8u));
 }
+Color Image::get_rgb111_pixel_(int x, int y) const {
+  const uint32_t bitpos = y * this->get_width_stride() * 8 + x * this->bpp_;
+  const uint8_t *byte = this->data_start_ + bitpos / 8;
+  const uint8_t shift = bitpos % 8;
+  // A pixel can straddle two bytes; read the second one only when it does.
+  uint16_t window = progmem_read_byte(byte) << 8;
+  if (shift + this->bpp_ > 8)
+    window |= progmem_read_byte(byte + 1);
+  const uint8_t bits = (window >> (16 - this->bpp_ - shift)) & ((1u << this->bpp_) - 1);
+  const uint8_t rgb = this->bpp_ == 4 ? bits >> 1 : bits;
+  const bool opaque = this->bpp_ == 3 || (bits & 1);
+  return Color(rgb & 4 ? 0xFF : 0x00, rgb & 2 ? 0xFF : 0x00, rgb & 1 ? 0xFF : 0x00, opaque ? 0xFF : 0x00);
+}
 Color Image::get_rgb_pixel_(int x, int y) const {
  const uint32_t pos = (x + y * this->width_) * this->bpp_ / 8;
  Color color = Color(progmem_read_byte(this->data_start_ + pos + 2), progmem_read_byte(this->data_start_ + pos + 1),
@@ -216,6 +248,9 @@ Image::Image(const uint8_t *data_start, int width, int height, ImageType type, T
    case IMAGE_TYPE_BINARY:
      this->bpp_ = 1;
      break;
+    case IMAGE_TYPE_RGB111:
+      this->bpp_ = this->transparency_ == TRANSPARENCY_ALPHA_CHANNEL ? 4 : 3;
+      break;
    case IMAGE_TYPE_GRAYSCALE:
      this->bpp_ = 8;
      break;
@@ -13,6 +13,7 @@ enum ImageType {
  IMAGE_TYPE_GRAYSCALE = 1,
  IMAGE_TYPE_RGB = 2,
  IMAGE_TYPE_RGB565 = 3,
+  IMAGE_TYPE_RGB111 = 4,  // one bit per channel plus an optional alpha bit, for colour e-paper
 };

 enum Transparency {
@@ -44,6 +45,7 @@ class Image : public display::BaseImage {
 #endif
 protected:
  bool get_binary_pixel_(int x, int y) const;
+  Color get_rgb111_pixel_(int x, int y) const;
  Color get_rgb_pixel_(int x, int y) const;
  Color get_rgb565_pixel_(int x, int y) const;
  Color get_grayscale_pixel_(int x, int y) const;
@@ -13,6 +13,24 @@ static const uint8_t INA3221_REGISTER_CHANNEL2_SHUNT_VOLTAGE = 0x03;
 static const uint8_t INA3221_REGISTER_CHANNEL2_BUS_VOLTAGE = 0x04;
 static const uint8_t INA3221_REGISTER_CHANNEL3_SHUNT_VOLTAGE = 0x05;
 static const uint8_t INA3221_REGISTER_CHANNEL3_BUS_VOLTAGE = 0x06;
+#ifdef USE_INA3221_ALERT_LIMITS
+static constexpr uint8_t INA3221_REGISTER_CHANNEL1_CRITICAL_ALERT = 0x07;
+static constexpr uint8_t INA3221_REGISTER_CHANNEL1_WARNING_ALERT = 0x0A;
+#endif
+#ifdef USE_INA3221_SUMMATION
+static constexpr uint8_t INA3221_REGISTER_SHUNT_VOLTAGE_SUM = 0x0D;
+static constexpr uint8_t INA3221_REGISTER_MASK_ENABLE = 0x0F;
+#endif
+
+// Configuration register: bit 15 resets the chip, bits 14..12 enable channels 1..3 (the same bit
+// positions select channels for summation in the mask/enable register) and bits 2..0 set the mode.
+// Code generation fills in the averaging and conversion time fields.
+static constexpr uint16_t INA3221_CONFIG_RESET = 0x8000;
+static constexpr uint16_t INA3221_CONFIG_CHANNEL1_ENABLE = 0x4000;
+static constexpr uint16_t INA3221_CONFIG_CHANNEL_MASK = 0x7000;
+static constexpr uint16_t INA3221_CONFIG_MODE_MASK = 0x0007;
+
+static constexpr uint32_t READ_TIMEOUT_ID = 0;

 // Addresses:
 // A0 = GND -> 0x40
@@ -21,37 +39,38 @@ static const uint8_t INA3221_REGISTER_CHANNEL3_BUS_VOLTAGE = 0x06;
 // A0 = SCL -> 0x43

 void INA3221Component::setup() {
-  // Config Register
-  // 0bx000000000000000 << 15 RESET Bit (1 -> trigger reset)
-  if (!this->write_byte_16(INA3221_REGISTER_CONFIG, 0x8000)) {
+  if (!this->write_byte_16(INA3221_REGISTER_CONFIG, INA3221_CONFIG_RESET)) {
    this->mark_failed();
    return;
  }
  delay(1);

-  uint16_t config = 0;
-  // 0b0xxx000000000000 << 12 Channel Enables (1 -> ON)
-  if (this->channels_[0].exists()) {
-    config |= 0b0100000000000000;
-  }
-  if (this->channels_[1].exists()) {
-    config |= 0b0010000000000000;
-  }
-  if (this->channels_[2].exists()) {
-    config |= 0b0001000000000000;
-  }
-  // 0b0000xxx000000000 << 9 Averaging Mode (0 -> 1 sample, 111 -> 1024 samples)
-  config |= 0b0000000000000000;
-  // 0b0000000xxx000000 << 6 Bus Voltage Conversion time (100 -> 1.1ms, 111 -> 8.244 ms)
-  config |= 0b0000000111000000;
-  // 0b0000000000xxx000 << 3 Shunt Voltage Conversion time (same as above)
-  config |= 0b0000000000111000;
-  // 0b0000000000000xxx << 0 Operating mode (111 -> Shunt and bus, continuous)
-  config |= 0b0000000000000111;
-  if (!this->write_byte_16(INA3221_REGISTER_CONFIG, config)) {
+  if (!this->write_byte_16(INA3221_REGISTER_CONFIG, this->config_)) {
    this->mark_failed();
    return;
  }
+
+#ifdef USE_INA3221_ALERT_LIMITS
+  for (uint8_t i = 0; i < 3; i++) {
+    const INA3221Channel &channel = this->channels_[i];
+    if ((channel.critical_limit_ != 0 &&
+         !this->write_byte_16(INA3221_REGISTER_CHANNEL1_CRITICAL_ALERT + i, channel.critical_limit_)) ||
+        (channel.warning_limit_ != 0 &&
+         !this->write_byte_16(INA3221_REGISTER_CHANNEL1_WARNING_ALERT + i, channel.warning_limit_))) {
+      this->mark_failed();
+      return;
+    }
+  }
+#endif
+
+#ifdef USE_INA3221_SUMMATION
+  // Sum the shunt voltages of every enabled channel
+  if (this->sum_shunt_voltage_sensor_ != nullptr &&
+      !this->write_byte_16(INA3221_REGISTER_MASK_ENABLE, this->config_ & INA3221_CONFIG_CHANNEL_MASK)) {
+    this->mark_failed();
+    return;
+  }
+#endif
 }

 void INA3221Component::dump_config() {
@@ -61,6 +80,10 @@ void INA3221Component::dump_config() {
    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
  }
  LOG_UPDATE_INTERVAL(this);
+  ESP_LOGCONFIG(TAG, "  Config register: 0x%04X", this->config_);
+  if (this->single_shot_wait_ms_ != 0) {
+    ESP_LOGCONFIG(TAG, "  Single-shot conversion: %u ms", this->single_shot_wait_ms_);
+  }

  LOG_SENSOR("  ", "Bus Voltage #1", this->channels_[0].bus_voltage_sensor_);
  LOG_SENSOR("  ", "Shunt Voltage #1", this->channels_[0].shunt_voltage_sensor_);
@@ -74,6 +97,11 @@ void INA3221Component::dump_config() {
  LOG_SENSOR("  ", "Shunt Voltage #3", this->channels_[2].shunt_voltage_sensor_);
  LOG_SENSOR("  ", "Current #3", this->channels_[2].current_sensor_);
  LOG_SENSOR("  ", "Power #3", this->channels_[2].power_sensor_);
+#ifdef USE_INA3221_SUMMATION
+  LOG_SENSOR("  ", "Sum Shunt Voltage", this->sum_shunt_voltage_sensor_);
+  LOG_SENSOR("  ", "Sum Current", this->sum_current_sensor_);
+  LOG_SENSOR("  ", "Sum Power", this->sum_power_sensor_);
+#endif
 }

 inline uint8_t ina3221_bus_voltage_register(int channel) { return 0x02 + channel * 2; }
@@ -81,11 +109,36 @@ inline uint8_t ina3221_bus_voltage_register(int channel) { return 0x02 + channel
 inline uint8_t ina3221_shunt_voltage_register(int channel) { return 0x01 + channel * 2; }

 void INA3221Component::update() {
+  if (this->single_shot_wait_ms_ == 0) {
+    this->read_data_();
+    return;
+  }
+  // In single-shot mode, writing the configuration register starts one conversion of every channel
+  if (!this->write_byte_16(INA3221_REGISTER_CONFIG, this->config_)) {
+    this->status_set_warning();
+    return;
+  }
+  this->set_timeout(READ_TIMEOUT_ID, this->single_shot_wait_ms_, [this]() { this->read_data_(); });
+}
+
+void INA3221Component::read_data_() {
+#ifdef USE_INA3221_SUMMATION
+  // The software sums need every enabled channel's readings, not only the ones with their own sensors
+  const bool sum_all = this->sum_current_sensor_ != nullptr || this->sum_power_sensor_ != nullptr;
+  float total_current_a = 0.0f;
+  float total_power_w = 0.0f;
+#else
+  constexpr bool sum_all = false;
+#endif
+
  for (int i = 0; i < 3; i++) {
+    if ((this->config_ & (INA3221_CONFIG_CHANNEL1_ENABLE >> i)) == 0) {
+      continue;
+    }
    INA3221Channel &channel = this->channels_[i];
    float bus_voltage_v = NAN, current_a = NAN;
    uint16_t raw;
-    if (channel.should_measure_bus_voltage()) {
+    if (sum_all || channel.should_measure_bus_voltage()) {
      if (!this->read_byte_16(ina3221_bus_voltage_register(i), &raw)) {
        this->status_set_warning();
        return;
@@ -94,7 +147,7 @@ void INA3221Component::update() {
      if (channel.bus_voltage_sensor_ != nullptr)
        channel.bus_voltage_sensor_->publish_state(bus_voltage_v);
    }
-    if (channel.should_measure_shunt_voltage()) {
+    if (sum_all || channel.should_measure_shunt_voltage()) {
      if (!this->read_byte_16(ina3221_shunt_voltage_register(i), &raw)) {
        this->status_set_warning();
        return;
@@ -109,17 +162,42 @@ void INA3221Component::update() {
    if (channel.power_sensor_ != nullptr) {
      channel.power_sensor_->publish_state(bus_voltage_v * current_a);
    }
+#ifdef USE_INA3221_SUMMATION
+    if (sum_all) {
+      total_current_a += current_a;
+      total_power_w += bus_voltage_v * current_a;
+    }
+#endif
  }
+
+#ifdef USE_INA3221_SUMMATION
+  if (this->sum_shunt_voltage_sensor_ != nullptr) {
+    uint16_t raw;
+    if (!this->read_byte_16(INA3221_REGISTER_SHUNT_VOLTAGE_SUM, &raw)) {
+      this->status_set_warning();
+      return;
+    }
+    // 40 uV per step, held in bits 15..1
+    this->sum_shunt_voltage_sensor_->publish_state(int16_t(raw) * 40.0f / 2.0f / 1000000.0f);
+  }
+  if (this->sum_current_sensor_ != nullptr) {
+    this->sum_current_sensor_->publish_state(total_current_a);
+  }
+  if (this->sum_power_sensor_ != nullptr) {
+    this->sum_power_sensor_->publish_state(total_power_w);
+  }
+#endif
+}
+
+void INA3221Component::on_powerdown() {
+  // Mode 0 powers the chip down; setup() resets it on the next boot
+  this->write_byte_16(INA3221_REGISTER_CONFIG, static_cast<uint16_t>(this->config_ & ~INA3221_CONFIG_MODE_MASK));
 }

 void INA3221Component::set_shunt_resistance(int channel, float resistance_ohm) {
  this->channels_[channel].shunt_resistance_ = resistance_ohm;
 }

-bool INA3221Component::INA3221Channel::exists() {
-  return this->bus_voltage_sensor_ != nullptr || this->shunt_voltage_sensor_ != nullptr ||
-         this->current_sensor_ != nullptr || this->power_sensor_ != nullptr;
-}
 bool INA3221Component::INA3221Channel::should_measure_shunt_voltage() {
  return this->shunt_voltage_sensor_ != nullptr || this->current_sensor_ != nullptr || this->power_sensor_ != nullptr;
 }
@@ -7,10 +7,17 @@
 namespace esphome::ina3221 {

 class INA3221Component final : public PollingComponent, public i2c::I2CDevice {
+#ifdef USE_INA3221_SUMMATION
+  SUB_SENSOR(sum_shunt_voltage)
+  SUB_SENSOR(sum_current)
+  SUB_SENSOR(sum_power)
+#endif
+
 public:
  void setup() override;
  void dump_config() override;
  void update() override;
+  void on_powerdown() override;

  void set_bus_voltage_sensor(int channel, sensor::Sensor *obj) { this->channels_[channel].bus_voltage_sensor_ = obj; }
  void set_shunt_voltage_sensor(int channel, sensor::Sensor *obj) {
@@ -19,19 +26,35 @@ class INA3221Component final : public PollingComponent, public i2c::I2CDevice {
  void set_current_sensor(int channel, sensor::Sensor *obj) { this->channels_[channel].current_sensor_ = obj; }
  void set_power_sensor(int channel, sensor::Sensor *obj) { this->channels_[channel].power_sensor_ = obj; }
  void set_shunt_resistance(int channel, float resistance_ohm);
+  /// Configuration register value built by code generation: channel enables, averaging, conversion times, mode
+  void set_config_register(uint16_t config) { this->config_ = config; }
+  /// Time one single-shot conversion of every enabled channel takes; zero means continuous mode
+  void set_single_shot_wait_ms(uint16_t wait_ms) { this->single_shot_wait_ms_ = wait_ms; }
+#ifdef USE_INA3221_ALERT_LIMITS
+  void set_warning_limit(int channel, uint16_t reg) { this->channels_[channel].warning_limit_ = reg; }
+  void set_critical_limit(int channel, uint16_t reg) { this->channels_[channel].critical_limit_ = reg; }
+#endif

 protected:
+  void read_data_();
+
  struct INA3221Channel {
    float shunt_resistance_{0.1f};
    sensor::Sensor *bus_voltage_sensor_{nullptr};
    sensor::Sensor *shunt_voltage_sensor_{nullptr};
    sensor::Sensor *current_sensor_{nullptr};
    sensor::Sensor *power_sensor_{nullptr};
+#ifdef USE_INA3221_ALERT_LIMITS
+    // Alert limit register values; zero keeps the chip default, which never trips
+    uint16_t warning_limit_{0};
+    uint16_t critical_limit_{0};
+#endif

-    bool exists();
    bool should_measure_shunt_voltage();
    bool should_measure_bus_voltage();
  } channels_[3];
+  uint16_t config_{0};
+  uint16_t single_shot_wait_ms_{0};
 };

 }  // namespace esphome::ina3221
@@ -1,5 +1,8 @@
+from typing import Any
+
 import esphome.codegen as cg
 from esphome.components import i2c, sensor
+from esphome.components.const import CONF_ADC_AVERAGING, CONF_ADC_TIME
 import esphome.config_validation as cv
 from esphome.const import (
    CONF_BUS_VOLTAGE,
@@ -8,6 +11,7 @@ from esphome.const import (
    CONF_POWER,
    CONF_SHUNT_RESISTANCE,
    CONF_SHUNT_VOLTAGE,
+    CONF_UPDATE_INTERVAL,
    DEVICE_CLASS_CURRENT,
    DEVICE_CLASS_POWER,
    DEVICE_CLASS_VOLTAGE,
@@ -23,69 +27,195 @@ DEPENDENCIES = ["i2c"]
 CONF_CHANNEL_1 = "channel_1"
 CONF_CHANNEL_2 = "channel_2"
 CONF_CHANNEL_3 = "channel_3"
+CONF_CONTINUOUS_MODE = "continuous_mode"
+CONF_WARNING_CURRENT_LIMIT = "warning_current_limit"
+CONF_CRITICAL_CURRENT_LIMIT = "critical_current_limit"
+CONF_SUM_SHUNT_VOLTAGE = "sum_shunt_voltage"
+CONF_SUM_CURRENT = "sum_current"
+CONF_SUM_POWER = "sum_power"
+
+CHANNELS = (CONF_CHANNEL_1, CONF_CHANNEL_2, CONF_CHANNEL_3)
+
+# Configuration register layout: channel enables in bits 14..12, averaging in 11..9,
+# bus conversion time in 8..6, shunt conversion time in 5..3, operating mode in 2..0
+CHANNEL_ENABLE_BITS = (1 << 14, 1 << 13, 1 << 12)
+ADC_AVERAGING_SHIFT = 9
+ADC_TIME_BUS_SHIFT = 6
+ADC_TIME_SHUNT_SHIFT = 3
+MODE_SINGLE_SHOT = 0b011
+MODE_CONTINUOUS = 0b111
+
+# Register field value by sample count and by conversion time in microseconds
+ADC_AVERAGING = {1: 0, 4: 1, 16: 2, 64: 3, 128: 4, 256: 5, 512: 6, 1024: 7}
+ADC_TIMES_US = {140: 0, 204: 1, 332: 2, 588: 3, 1100: 4, 2116: 5, 4156: 6, 8244: 7}
+
+# Alert limits are shunt voltages in 40 uV steps, held in bits 15..3
+ALERT_LIMIT_LSB_V = 40e-6
+ALERT_LIMIT_MAX_V = 0x0FFF * ALERT_LIMIT_LSB_V
+# Headroom on top of the computed conversion time before the results are read
+SINGLE_SHOT_MARGIN_MS = 5

 ina3221_ns = cg.esphome_ns.namespace("ina3221")
 INA3221Component = ina3221_ns.class_(
    "INA3221Component", cg.PollingComponent, i2c.I2CDevice
 )

-INA3221_CHANNEL_SCHEMA = cv.Schema(
-    {
-        cv.Optional(CONF_BUS_VOLTAGE): sensor.sensor_schema(
-            unit_of_measurement=UNIT_VOLT,
-            accuracy_decimals=2,
-            device_class=DEVICE_CLASS_VOLTAGE,
-            state_class=STATE_CLASS_MEASUREMENT,
-        ),
-        cv.Optional(CONF_SHUNT_VOLTAGE): sensor.sensor_schema(
-            unit_of_measurement=UNIT_VOLT,
-            accuracy_decimals=2,
-            device_class=DEVICE_CLASS_VOLTAGE,
-            state_class=STATE_CLASS_MEASUREMENT,
-        ),
-        cv.Optional(CONF_CURRENT): sensor.sensor_schema(
-            unit_of_measurement=UNIT_AMPERE,
-            accuracy_decimals=2,
-            device_class=DEVICE_CLASS_CURRENT,
-            state_class=STATE_CLASS_MEASUREMENT,
-        ),
-        cv.Optional(CONF_POWER): sensor.sensor_schema(
-            unit_of_measurement=UNIT_WATT,
-            accuracy_decimals=2,
-            device_class=DEVICE_CLASS_POWER,
-            state_class=STATE_CLASS_MEASUREMENT,
-        ),
-        cv.Optional(CONF_SHUNT_RESISTANCE, default=0.1): cv.All(
-            cv.resistance, cv.Range(min=0.0, max=32.0)
-        ),
-    }
+VOLTAGE_SCHEMA = sensor.sensor_schema(
+    unit_of_measurement=UNIT_VOLT,
+    accuracy_decimals=2,
+    device_class=DEVICE_CLASS_VOLTAGE,
+    state_class=STATE_CLASS_MEASUREMENT,
+)
+CURRENT_SCHEMA = sensor.sensor_schema(
+    unit_of_measurement=UNIT_AMPERE,
+    accuracy_decimals=2,
+    device_class=DEVICE_CLASS_CURRENT,
+    state_class=STATE_CLASS_MEASUREMENT,
+)
+POWER_SCHEMA = sensor.sensor_schema(
+    unit_of_measurement=UNIT_WATT,
+    accuracy_decimals=2,
+    device_class=DEVICE_CLASS_POWER,
+    state_class=STATE_CLASS_MEASUREMENT,
+)
+CURRENT_LIMIT_SCHEMA = cv.All(cv.current, cv.Range(min=0.0, min_included=False))
+
+
+def validate_adc_time(value: Any) -> int:
+    value = cv.positive_time_period_microseconds(value).total_microseconds
+    return cv.one_of(*ADC_TIMES_US, int=True)(value)
+
+
+def validate_alert_limits(config: ConfigType) -> ConfigType:
+    shunt = config[CONF_SHUNT_RESISTANCE]
+    for key in (CONF_WARNING_CURRENT_LIMIT, CONF_CRITICAL_CURRENT_LIMIT):
+        if (limit := config.get(key)) is None:
+            continue
+        if limit * shunt > ALERT_LIMIT_MAX_V:
+            raise cv.Invalid(
+                f"{key} times shunt_resistance exceeds the "
+                f"{ALERT_LIMIT_MAX_V * 1000:.1f} mV alert range",
+                path=[key],
+            )
+        if alert_limit_register(limit, shunt) == 0:
+            raise cv.Invalid(
+                f"{key} times shunt_resistance is below the "
+                f"{ALERT_LIMIT_LSB_V * 1e6:.0f} µV alert resolution",
+                path=[key],
+            )
+    return config
+
+
+INA3221_CHANNEL_SCHEMA = cv.All(
+    cv.Schema(
+        {
+            cv.Optional(CONF_BUS_VOLTAGE): VOLTAGE_SCHEMA,
+            cv.Optional(CONF_SHUNT_VOLTAGE): VOLTAGE_SCHEMA,
+            cv.Optional(CONF_CURRENT): CURRENT_SCHEMA,
+            cv.Optional(CONF_POWER): POWER_SCHEMA,
+            cv.Optional(CONF_SHUNT_RESISTANCE, default=0.1): cv.All(
+                cv.resistance, cv.Range(min=0.0, max=32.0)
+            ),
+            cv.Optional(CONF_WARNING_CURRENT_LIMIT): CURRENT_LIMIT_SCHEMA,
+            cv.Optional(CONF_CRITICAL_CURRENT_LIMIT): CURRENT_LIMIT_SCHEMA,
+        }
+    ),
+    cv.has_at_least_one_key(
+        CONF_BUS_VOLTAGE,
+        CONF_SHUNT_VOLTAGE,
+        CONF_CURRENT,
+        CONF_POWER,
+        CONF_WARNING_CURRENT_LIMIT,
+        CONF_CRITICAL_CURRENT_LIMIT,
+    ),
+    validate_alert_limits,
 )

-CONFIG_SCHEMA = (
+
+def adc_times_us(config: ConfigType) -> tuple[int, int]:
+    """Return the bus and shunt conversion times in microseconds."""
+    adc_time = config[CONF_ADC_TIME]
+    if isinstance(adc_time, dict):
+        return adc_time[CONF_BUS_VOLTAGE], adc_time[CONF_SHUNT_VOLTAGE]
+    return adc_time, adc_time
+
+
+def single_shot_wait_ms(config: ConfigType) -> int:
+    """Time one conversion of every enabled channel takes, plus headroom."""
+    bus_us, shunt_us = adc_times_us(config)
+    channels = sum(1 for channel in CHANNELS if channel in config)
+    total_us = (bus_us + shunt_us) * config[CONF_ADC_AVERAGING] * channels
+    return -(-total_us // 1000) + SINGLE_SHOT_MARGIN_MS
+
+
+def validate_single_shot_interval(config: ConfigType) -> ConfigType:
+    if config[CONF_CONTINUOUS_MODE]:
+        return config
+    wait_ms = single_shot_wait_ms(config)
+    if config[CONF_UPDATE_INTERVAL].total_milliseconds <= wait_ms:
+        raise cv.Invalid(
+            f"A single-shot conversion of all channels takes {wait_ms} ms, which does "
+            f"not fit in the update_interval; lower {CONF_ADC_AVERAGING} or "
+            f"{CONF_ADC_TIME}, or raise the interval",
+            path=[CONF_UPDATE_INTERVAL],
+        )
+    return config
+
+
+CONFIG_SCHEMA = cv.All(
    cv.Schema(
        {
            cv.GenerateID(): cv.declare_id(INA3221Component),
            cv.Optional(CONF_CHANNEL_1): INA3221_CHANNEL_SCHEMA,
            cv.Optional(CONF_CHANNEL_2): INA3221_CHANNEL_SCHEMA,
            cv.Optional(CONF_CHANNEL_3): INA3221_CHANNEL_SCHEMA,
+            cv.Optional(CONF_CONTINUOUS_MODE, default=True): cv.boolean,
+            cv.Optional(CONF_ADC_AVERAGING, default=1): cv.one_of(
+                *ADC_AVERAGING, int=True
+            ),
+            cv.Optional(CONF_ADC_TIME, default="8244us"): cv.Any(
+                validate_adc_time,
+                cv.Schema(
+                    {
+                        cv.Required(CONF_BUS_VOLTAGE): validate_adc_time,
+                        cv.Required(CONF_SHUNT_VOLTAGE): validate_adc_time,
+                    }
+                ),
+            ),
+            cv.Optional(CONF_SUM_SHUNT_VOLTAGE): VOLTAGE_SCHEMA,
+            cv.Optional(CONF_SUM_CURRENT): CURRENT_SCHEMA,
+            cv.Optional(CONF_SUM_POWER): POWER_SCHEMA,
        }
    )
    .extend(cv.polling_component_schema("60s"))
-    .extend(i2c.i2c_device_schema(0x40))
+    .extend(i2c.i2c_device_schema(0x40)),
+    cv.has_at_least_one_key(*CHANNELS),
+    validate_single_shot_interval,
 )


+def alert_limit_register(current_a: float, shunt_ohm: float) -> int:
+    return round(current_a * shunt_ohm / ALERT_LIMIT_LSB_V) << 3
+
+
 async def to_code(config: ConfigType) -> None:
    var = cg.new_Pvariable(config[CONF_ID])
    await cg.register_component(var, config)
    await i2c.register_i2c_device(var, config)

-    for i, channel in enumerate([CONF_CHANNEL_1, CONF_CHANNEL_2, CONF_CHANNEL_3]):
-        if channel not in config:
+    bus_us, shunt_us = adc_times_us(config)
+    register = (
+        ADC_AVERAGING[config[CONF_ADC_AVERAGING]] << ADC_AVERAGING_SHIFT
+        | ADC_TIMES_US[bus_us] << ADC_TIME_BUS_SHIFT
+        | ADC_TIMES_US[shunt_us] << ADC_TIME_SHUNT_SHIFT
+        | (MODE_CONTINUOUS if config[CONF_CONTINUOUS_MODE] else MODE_SINGLE_SHOT)
+    )
+    for i, channel in enumerate(CHANNELS):
+        if (conf := config.get(channel)) is None:
            continue
-        conf = config[channel]
-        if CONF_SHUNT_RESISTANCE in conf:
-            cg.add(var.set_shunt_resistance(i, conf[CONF_SHUNT_RESISTANCE]))
+        register |= CHANNEL_ENABLE_BITS[i]
+        shunt = conf[CONF_SHUNT_RESISTANCE]
+        cg.add(var.set_shunt_resistance(i, shunt))
        if CONF_BUS_VOLTAGE in conf:
            sens = await sensor.new_sensor(conf[CONF_BUS_VOLTAGE])
            cg.add(var.set_bus_voltage_sensor(i, sens))
@@ -98,3 +228,23 @@ async def to_code(config: ConfigType) -> None:
        if CONF_POWER in conf:
            sens = await sensor.new_sensor(conf[CONF_POWER])
            cg.add(var.set_power_sensor(i, sens))
+        for key, setter in (
+            (CONF_WARNING_CURRENT_LIMIT, var.set_warning_limit),
+            (CONF_CRITICAL_CURRENT_LIMIT, var.set_critical_limit),
+        ):
+            if (limit := conf.get(key)) is not None:
+                cg.add_define("USE_INA3221_ALERT_LIMITS")
+                cg.add(setter(i, alert_limit_register(limit, shunt)))
+    cg.add(var.set_config_register(register))
+    if not config[CONF_CONTINUOUS_MODE]:
+        cg.add(var.set_single_shot_wait_ms(single_shot_wait_ms(config)))
+
+    if any(
+        key in config
+        for key in (CONF_SUM_SHUNT_VOLTAGE, CONF_SUM_CURRENT, CONF_SUM_POWER)
+    ):
+        cg.add_define("USE_INA3221_SUMMATION")
+        sensors = sensor.sub_sensors(config)
+        await sensors(CONF_SUM_SHUNT_VOLTAGE, var.set_sum_shunt_voltage_sensor)
+        await sensors(CONF_SUM_CURRENT, var.set_sum_current_sensor)
+        await sensors(CONF_SUM_POWER, var.set_sum_power_sensor)
@@ -891,12 +891,10 @@ static uint8_t color_to_nibble(const Color &color) {
  if (color.raw_32 == 0xFFFFFFFF)
    return 0x0F;  // white

-  // Derive luma from RGB using Rec.601 weights (0.299/0.587/0.114, scaled by
-  // 256). Rec.601 is the standard for converting SDR images to grayscale and
-  // spreads saturated colours across the mid-range; Rec.709 instead crams them
-  // against white/black where the 16 panel levels are hard to tell apart.
-  auto luma = static_cast<uint8_t>((77u * color.r + 150u * color.g + 29u * color.b + 128u) >> 8);
-  return quantize_8bit_to_nibble(luma);
+  // Rec.601 luma is the standard for converting SDR images to grayscale and spreads saturated colours
+  // across the mid-range; Rec.709 instead crams them against white/black where the 16 panel levels are
+  // hard to tell apart.
+  return quantize_8bit_to_nibble(display::rec601_luma(color));
 }

 // 4x4 ordered (Bayer) dither threshold over the weighted-luma range (0..65535).
@@ -4,6 +4,7 @@ import esphome.config_validation as cv
 from esphome.const import CONF_ID
 from esphome.types import ConfigType

+AUTO_LOAD = ["ld24xx"]
 CODEOWNERS = ["@NovakIrs"]
 DEPENDENCIES = ["uart"]
 DOMAIN = "ld2410s"
@@ -13,6 +14,7 @@ CONF_LD2410S_ID = "ld2410s_id"

 ld2410s_ns = cg.esphome_ns.namespace(DOMAIN)
 LD2410SComponent = ld2410s_ns.class_("LD2410SComponent", cg.Component, uart.UARTDevice)
+Parameter = ld2410s_ns.enum("Parameter", is_class=True)

 CONFIG_SCHEMA = (
    cv.Schema(
@@ -1,4 +1,5 @@
 #include "ld2410s.h"
+#include "ld2410s_number.h"
 #include <algorithm>
 #include <cstring>
 #include "esphome/core/application.h"
@@ -25,18 +26,46 @@ static constexpr uint16_t CMD_CONFIRMATION = 0x0100;  // set in the command word
 static constexpr uint16_t CONFIG_MODE_START_CMD = 0x00FF;
 static constexpr uint16_t CONFIG_MODE_START_VALUE = 0x0001;
 static constexpr uint16_t CONFIG_MODE_END_CMD = 0x00FE;
+static constexpr uint16_t VERSION_READ_CMD = 0x0000;
+static constexpr uint16_t PARAMETERS_WRITE_CMD = 0x0070;
+static constexpr uint16_t PARAMETERS_READ_CMD = 0x0071;
 static constexpr uint16_t OUTPUT_MODE_SWITCH_CMD = 0x007A;
 // Minimal output mode (short frames carrying presence and distance only) is selected by six zero bytes
 static constexpr uint8_t OUTPUT_MODE_MINIMAL_SIZE = 6;
-static constexpr uint8_t CMD_FRAME_MAX_SIZE =
-    LONG_PAYLOAD_POS + 2 + OUTPUT_MODE_MINIMAL_SIZE + sizeof(CMD_FRAME_FOOTER);
+// The parameter write carries a 16-bit key and a 32-bit value per parameter, the read only the keys
+static constexpr uint8_t PARAMETER_KEY_SIZE = 2;
+static constexpr uint8_t PARAMETER_VALUE_SIZE = 4;
+static constexpr uint8_t PARAMETERS_WRITE_SIZE = PARAMETER_COUNT * (PARAMETER_KEY_SIZE + PARAMETER_VALUE_SIZE);
+static constexpr uint8_t CMD_FRAME_MAX_SIZE = LONG_PAYLOAD_POS + 2 + PARAMETERS_WRITE_SIZE + sizeof(CMD_FRAME_FOOTER);
+// Keys of the parameters, in Parameter order
+#ifdef USE_LD2410S_PARAMETERS
+static constexpr uint16_t PARAMETER_KEYS[] PROGMEM = {0x0005, 0x000A, 0x0006, 0x0002, 0x000C, 0x000B};
+static_assert(sizeof(PARAMETER_KEYS) / sizeof(PARAMETER_KEYS[0]) == PARAMETER_COUNT, "one key per parameter");
+#endif
+// The version answer: 4 bytes device type, then major, minor and patch as 16-bit words
+static constexpr uint8_t VERSION_TYPE_SIZE = 4;
+static constexpr uint8_t VERSION_SIZE = VERSION_TYPE_SIZE + 3 * 2;

-// Everything the module needs at start: enter configuration mode, pick the output mode, leave it
-static constexpr uint16_t INIT_SEQUENCE[] PROGMEM = {CONFIG_MODE_START_CMD, OUTPUT_MODE_SWITCH_CMD,
-                                                     CONFIG_MODE_END_CMD};
+// Everything the module needs at start: configuration mode on, read the version and parameters when
+// an entity shows them, pick the output mode, configuration mode off
+static constexpr uint16_t INIT_SEQUENCE[] PROGMEM = {
+    CONFIG_MODE_START_CMD,
+#ifdef USE_LD2410S_VERSION
+    VERSION_READ_CMD,
+#endif
+#ifdef USE_LD2410S_PARAMETERS
+    PARAMETERS_READ_CMD,
+#endif
+    OUTPUT_MODE_SWITCH_CMD, CONFIG_MODE_END_CMD,
+};
+#ifdef USE_LD2410S_PARAMETERS
+static constexpr uint16_t WRITE_SEQUENCE[] PROGMEM = {CONFIG_MODE_START_CMD, PARAMETERS_WRITE_CMD, CONFIG_MODE_END_CMD};
+#endif
 static constexpr uint8_t INIT_SEQUENCE_LENGTH = sizeof(INIT_SEQUENCE) / sizeof(INIT_SEQUENCE[0]);
-static uint16_t init_command(uint8_t step) { return progmem_read_uint16(&INIT_SEQUENCE[step]); }
-static constexpr uint8_t INIT_MAX_TIMEOUTS = 2;
+#ifdef USE_LD2410S_PARAMETERS
+static constexpr uint8_t WRITE_SEQUENCE_LENGTH = sizeof(WRITE_SEQUENCE) / sizeof(WRITE_SEQUENCE[0]);
+#endif
+static constexpr uint8_t STEP_MAX_TIMEOUTS = 2;
 static constexpr uint32_t ACK_TIMEOUT_MS = 300;
 static constexpr uint32_t COMMAND_GAP_MS = 300;     // pause after an acknowledgement before the next command
 static constexpr uint32_t REINIT_PAUSE_MS = 15000;  // pause before starting over after the module stopped answering
@@ -49,6 +78,20 @@ void LD2410SComponent::dump_config() {
 #ifdef USE_BINARY_SENSOR
  LOG_BINARY_SENSOR("  ", "Has Target", this->target_binary_sensor_);
 #endif
+#ifdef USE_SENSOR
+  LOG_SENSOR_WITH_DEDUP_SAFE("  ", "Distance", this->distance_sensor_);
+#endif
+#ifdef USE_LD2410S_VERSION
+  LOG_TEXT_SENSOR("  ", "Version", this->version_text_sensor_);
+#endif
+#if defined(USE_NUMBER) && defined(USE_LD2410S_PARAMETERS)
+  for (auto *number : this->numbers_) {
+    LOG_NUMBER("  ", "Setting", number);
+  }
+#endif
+#if defined(USE_SELECT) && defined(USE_LD2410S_PARAMETERS)
+  LOG_SELECT("  ", "Response Speed", this->response_speed_select_);
+#endif
 }

 void LD2410SComponent::loop() {
@@ -67,35 +110,80 @@ void LD2410SComponent::loop() {
    avail -= len;
  }
  const uint32_t now = App.get_loop_component_start_time();
-  this->run_init_sequence_(now);
-  if (this->init_step_ >= INIT_SEQUENCE_LENGTH && now - this->last_frame_at_ > LINK_TIMEOUT_MS) {
+  if (this->sequence_ == nullptr) {
+    if (!this->init_done_) {
+      this->start_sequence_(INIT_SEQUENCE, INIT_SEQUENCE_LENGTH, now);
+#ifdef USE_LD2410S_PARAMETERS
+    } else if (this->parameters_dirty_) {
+      this->parameters_dirty_ = false;
+      this->start_sequence_(WRITE_SEQUENCE, WRITE_SEQUENCE_LENGTH, this->next_send_at_);
+#endif
+    }
+  }
+  this->run_sequence_(now);
+  if (this->init_done_ && now - this->last_frame_at_ > LINK_TIMEOUT_MS) {
    // The count tells real silence apart from frames that never parse (wrong baud rate or firmware)
    ESP_LOGW(TAG, "No data for %" PRIu32 " s (%u frames dropped), starting over", LINK_TIMEOUT_MS / 1000,
             this->dropped_frames_);
    this->dropped_frames_ = 0;
-    this->status_set_warning();
-    this->init_step_ = 0;
-    this->init_timeouts_ = 0;
-    this->awaiting_ack_ = false;
-    this->next_send_at_ = now;
+    this->restart_init_(now);
  }
 }

-void LD2410SComponent::run_init_sequence_(uint32_t now) {
-  if (this->init_step_ >= INIT_SEQUENCE_LENGTH || static_cast<int32_t>(now - this->next_send_at_) < 0) {
+#ifdef USE_LD2410S_PARAMETERS
+bool LD2410SComponent::set_parameter(Parameter parameter, uint8_t value) {
+  // All six are written together, so the other five must be the module's own values
+  if (!this->init_done_) {
+    ESP_LOGW(TAG, "Parameters not read yet, change ignored");
+    return false;
+  }
+  if (!this->parameters_known_) {
+    ESP_LOGW(TAG, "The module reported a parameter out of range, changes are disabled");
+    return false;
+  }
+  this->parameters_[static_cast<uint8_t>(parameter)] = value;
+  this->parameters_dirty_ = true;  // written by loop() once no sequence is running
+  return true;
+}
+#endif
+
+void LD2410SComponent::restart_init_(uint32_t at) {
+  this->init_done_ = false;
+  this->status_set_warning();  // cleared again when the new init sequence is acknowledged
+#ifdef USE_LD2410S_PARAMETERS
+  // The module's own values count again once it is set up anew
+  if (this->parameters_dirty_) {
+    ESP_LOGW(TAG, "Dropping the pending parameter change, the module's values are read back");
+  }
+  this->parameters_dirty_ = false;
+  this->parameters_known_ = false;  // a refused value may sit in parameters_ until the read replaces it
+#endif
+  this->start_sequence_(INIT_SEQUENCE, INIT_SEQUENCE_LENGTH, at);
+}
+
+void LD2410SComponent::start_sequence_(const uint16_t *sequence, uint8_t length, uint32_t now) {
+  this->sequence_ = sequence;
+  this->sequence_len_ = length;
+  this->step_ = 0;
+  this->step_timeouts_ = 0;
+  this->awaiting_ack_ = false;
+  this->next_send_at_ = now;
+}
+
+uint16_t LD2410SComponent::current_command_() const { return progmem_read_uint16(&this->sequence_[this->step_]); }
+
+void LD2410SComponent::run_sequence_(uint32_t now) {
+  if (this->sequence_ == nullptr || static_cast<int32_t>(now - this->next_send_at_) < 0) {
    return;
  }
-  const uint16_t command = init_command(this->init_step_);
+  const uint16_t command = this->current_command_();
  if (this->awaiting_ack_) {
-    if (++this->init_timeouts_ > INIT_MAX_TIMEOUTS) {
+    if (++this->step_timeouts_ > STEP_MAX_TIMEOUTS) {
      ESP_LOGW(TAG, "No acknowledgement for command %04X, starting over in %" PRIu32 " s", command,
               REINIT_PAUSE_MS / 1000);
      // Leave configuration mode whatever state the module is in, then begin again
      this->send_command_(CONFIG_MODE_END_CMD);
-      this->init_step_ = 0;
-      this->init_timeouts_ = 0;
-      this->awaiting_ack_ = false;
-      this->next_send_at_ = now + REINIT_PAUSE_MS;
+      this->restart_init_(now + REINIT_PAUSE_MS);
      return;
    }
    ESP_LOGD(TAG, "No acknowledgement for command %04X, resending", command);
@@ -120,6 +208,22 @@ void LD2410SComponent::send_command_(uint16_t command) {
      frame[pos++] = CONFIG_MODE_START_VALUE & 0xFF;
      frame[pos++] = CONFIG_MODE_START_VALUE >> 8;
      break;
+#ifdef USE_LD2410S_PARAMETERS
+    case PARAMETERS_READ_CMD:
+    case PARAMETERS_WRITE_CMD:
+      for (uint8_t i = 0; i < PARAMETER_COUNT; i++) {
+        const uint16_t key = progmem_read_uint16(&PARAMETER_KEYS[i]);
+        frame[pos++] = key & 0xFF;
+        frame[pos++] = key >> 8;
+        if (command == PARAMETERS_WRITE_CMD) {
+          const uint32_t value = this->parameters_[i];  // a 32-bit field on the wire
+          for (uint8_t shift = 0; shift < 32; shift += 8) {
+            frame[pos++] = (value >> shift) & 0xFF;
+          }
+        }
+      }
+      break;
+#endif
    default:
      break;
  }
@@ -252,27 +356,27 @@ bool LD2410SComponent::handle_frame_() {
 }

 bool LD2410SComponent::handle_data_frame_(const uint8_t *payload, uint16_t len) {
-  uint8_t state;
-  if (this->frame_type_ == FrameType::SHORT_DATA) {
-    // [state][distance low][distance high]
-    state = payload[0];
-  } else if (len >= 4 && payload[0] == DATA_TYPE_STANDARD) {
-    // [type][state][distance low][distance high]...; the module only sends these before the init
-    // sequence switches it to minimal output
-    state = payload[1];
-  } else {
-    if (len >= 1) {
-      ESP_LOGV(TAG, "Ignoring data frame type %02X", payload[0]);
+  // Short frames carry [state][distance low][distance high]; standard frames put a type byte first, and the
+  // module only sends them before the init sequence switches it to minimal output
+  const uint8_t *data = payload;
+  if (this->frame_type_ == FrameType::STD_DATA) {
+    if (len < 4 || payload[0] != DATA_TYPE_STANDARD) {
+      if (len >= 1) {
+        ESP_LOGV(TAG, "Ignoring data frame type %02X", payload[0]);
+      }
+      return true;
    }
-    return true;
+    data = payload + 1;
  }
+  const uint8_t state = data[0];
+  const uint16_t distance = encode_uint16(data[2], data[1]);
  // States 0 and 1 mean no target, 2 and 3 a target; anything else is line noise that happened to
  // carry the header and footer bytes
  if (state > 3) {
    ESP_LOGV(TAG, "Dropping frame with impossible state %u", state);
    return false;
  }
-  this->publish_target_(state > 1);
+  this->publish_target_(state > 1, distance);
  return true;
 }

@@ -283,32 +387,147 @@ void LD2410SComponent::handle_command_ack_(const uint8_t *payload, uint16_t len)
  }
  const uint16_t command_word = encode_uint16(payload[1], payload[0]);
  const uint16_t ack = encode_uint16(payload[3], payload[2]);
-  if (!this->awaiting_ack_ || command_word != (init_command(this->init_step_) | CMD_CONFIRMATION)) {
+  if (!this->awaiting_ack_) {
    ESP_LOGV(TAG, "Unexpected acknowledgement %04X", command_word);
    return;
  }
-  if (ack != 0) {
-    // Leave the command pending so the timeout resends it
-    ESP_LOGW(TAG, "Module rejected command %04X, ack %04X", init_command(this->init_step_), ack);
+  const uint16_t command = this->current_command_();
+  if (command_word != (command | CMD_CONFIRMATION)) {
+    ESP_LOGV(TAG, "Unexpected acknowledgement %04X", command_word);
    return;
  }
+#ifdef USE_LD2410S_PARAMETERS
+  if (ack != 0 && command == PARAMETERS_WRITE_CMD) {
+    // Resending the same values would be rejected again; leave configuration mode and read the
+    // module's own values back, which republishes them
+    ESP_LOGW(TAG, "Module rejected the parameters, ack %04X", ack);
+    this->send_command_(CONFIG_MODE_END_CMD);
+    this->restart_init_(App.get_loop_component_start_time() + COMMAND_GAP_MS);
+    return;
+  }
+#endif
+  if (ack != 0) {
+    // Leave the command pending so the timeout resends it
+    ESP_LOGW(TAG, "Module rejected command %04X, ack %04X", command, ack);
+    return;
+  }
+  // A short answer leaves the read pending the same way, so init cannot finish without the values
+#ifdef USE_LD2410S_PARAMETERS
+  if (command == PARAMETERS_READ_CMD && !this->handle_parameters_(&payload[4], len - 4))
+    return;
+#endif
+#ifdef USE_LD2410S_VERSION
+  if (command == VERSION_READ_CMD && !this->handle_version_(&payload[4], len - 4))
+    return;
+#endif
  this->awaiting_ack_ = false;
-  this->init_timeouts_ = 0;
-  this->init_step_++;
-  this->next_send_at_ = App.get_loop_component_start_time() + COMMAND_GAP_MS;
-  if (this->init_step_ >= INIT_SEQUENCE_LENGTH) {
+  this->step_timeouts_ = 0;
+  const uint32_t now = App.get_loop_component_start_time();
+  this->next_send_at_ = now + COMMAND_GAP_MS;
+  if (++this->step_ < this->sequence_len_) {
+    return;
+  }
+  const bool was_init = this->sequence_ == INIT_SEQUENCE;
+  this->sequence_ = nullptr;
+  if (was_init) {
    ESP_LOGD(TAG, "Setup done");
-    this->last_frame_at_ = App.get_loop_component_start_time();
+    this->init_done_ = true;
+    this->last_frame_at_ = now;
    this->status_clear_warning();
  }
 }

-void LD2410SComponent::publish_target_(bool target) {
+#ifdef USE_LD2410S_PARAMETERS
+// The answer lists the parameter values in key order, 32 bits each; returns false when it is cut short
+bool LD2410SComponent::handle_parameters_(const uint8_t *values, uint16_t len) {
+  if (len < PARAMETER_COUNT * PARAMETER_VALUE_SIZE) {
+    ESP_LOGW(TAG, "Parameter answer too short (%u bytes)", len);
+    return false;
+  }
+  // Every parameter must fit the low byte of its little-endian value; otherwise nothing is stored or
+  // published and writes stay refused, so a cut-down value is never shown or sent back
+  for (uint8_t i = 0; i < PARAMETER_COUNT; i++) {
+    const uint8_t *v = &values[i * PARAMETER_VALUE_SIZE];
+    if ((v[1] | v[2] | v[3]) != 0) {
+      ESP_LOGW(TAG, "Parameter %u out of range: %" PRIu32 ", changes stay disabled", i,
+               encode_uint32(v[3], v[2], v[1], v[0]));
+      this->parameters_known_ = false;
+#ifdef USE_NUMBER
+      // A value a number showed before the module answered is not confirmed
+      for (auto *number : this->numbers_) {
+        if (number != nullptr) {
+          number->publish_state(NAN);
+        }
+      }
+#endif
+      return true;
+    }
+  }
+  for (uint8_t i = 0; i < PARAMETER_COUNT; i++) {
+    this->parameters_[i] = values[i * PARAMETER_VALUE_SIZE];
+  }
+  this->parameters_known_ = true;
+  this->publish_parameters_();
+  ESP_LOGD(TAG, "Parameters: gates %u to %u, no delay %u s, frequencies %u/%u dHz, response speed %u",
+           this->parameters_[1], this->parameters_[0], this->parameters_[2], this->parameters_[3], this->parameters_[4],
+           this->parameters_[5]);
+  return true;
+}
+#endif
+
+#ifdef USE_LD2410S_VERSION
+// Returns false when the answer is cut short
+bool LD2410SComponent::handle_version_(const uint8_t *values, uint16_t len) {
+  if (len < VERSION_SIZE) {
+    ESP_LOGW(TAG, "Version answer too short (%u bytes)", len);
+    return false;
+  }
+  const uint8_t *v = &values[VERSION_TYPE_SIZE];
+  char version[18];
+  snprintf(version, sizeof(version), "%u.%u.%u", encode_uint16(v[1], v[0]), encode_uint16(v[3], v[2]),
+           encode_uint16(v[5], v[4]));
+  ESP_LOGD(TAG, "Firmware %s", version);
+  if (this->version_text_sensor_ != nullptr) {
+    this->version_text_sensor_->publish_state(version);
+  }
+  return true;
+}
+#endif
+
+void LD2410SComponent::publish_target_(bool target, uint16_t distance) {
 #ifdef USE_BINARY_SENSOR
  if (this->target_binary_sensor_ != nullptr) {
    this->target_binary_sensor_->publish_state(target);
  }
 #endif
+#ifdef USE_SENSOR
+  // The module keeps reporting the last distance after the target left
+  SAFE_PUBLISH_SENSOR(this->distance_sensor_, target ? distance : 0);
+#endif
 }

+#ifdef USE_LD2410S_PARAMETERS
+void LD2410SComponent::publish_parameters_() {
+#ifdef USE_NUMBER
+  for (uint8_t i = 0; i < PARAMETER_COUNT; i++) {
+    if (this->numbers_[i] != nullptr) {
+      this->numbers_[i]->publish_raw(this->parameters_[i]);
+    }
+  }
+#endif
+#ifdef USE_SELECT
+  if (this->response_speed_select_ != nullptr) {
+    const uint8_t speed = this->parameters_[static_cast<uint8_t>(Parameter::PARAMETER_RESPONSE_SPEED)];
+    for (uint8_t i = 0; i < RESPONSE_SPEED_COUNT; i++) {
+      if (progmem_read_byte(&RESPONSE_SPEEDS[i]) == speed) {
+        this->response_speed_select_->publish_state(i);
+        return;
+      }
+    }
+    ESP_LOGV(TAG, "Unknown response speed %u", speed);
+  }
+#endif
+}
+#endif
+
 }  // namespace esphome::ld2410s
@@ -2,10 +2,21 @@

 #include "esphome/core/component.h"
 #include "esphome/core/defines.h"
+#include "esphome/core/helpers.h"
 #include "esphome/components/uart/uart.h"
 #ifdef USE_BINARY_SENSOR
 #include "esphome/components/binary_sensor/binary_sensor.h"
 #endif
+#ifdef USE_SENSOR
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/ld24xx/ld24xx.h"
+#endif
+#ifdef USE_LD2410S_VERSION
+#include "esphome/components/text_sensor/text_sensor.h"
+#endif
+#if defined(USE_SELECT) && defined(USE_LD2410S_PARAMETERS)
+#include "esphome/components/select/select.h"
+#endif

 namespace esphome::ld2410s {

@@ -13,16 +24,55 @@ namespace esphome::ld2410s {
 static constexpr size_t RX_BUFFER_SIZE = 96;
 static_assert(RX_BUFFER_SIZE <= 255, "frame lengths are kept in a byte");

+/// The module's common parameters, in the order the parameter read answers them
+enum class Parameter : uint8_t {
+  PARAMETER_MAX_DISTANCE,
+  PARAMETER_MIN_DISTANCE,
+  PARAMETER_NO_DELAY,
+  PARAMETER_STATUS_FREQUENCY,
+  PARAMETER_DISTANCE_FREQUENCY,
+  PARAMETER_RESPONSE_SPEED,
+  PARAMETER_COUNT,
+};
+static constexpr uint8_t PARAMETER_COUNT = static_cast<uint8_t>(Parameter::PARAMETER_COUNT);
+// Response speed values, in the order of the select's options (Normal, Fast)
+static constexpr uint8_t RESPONSE_SPEEDS[] PROGMEM = {5, 10};
+static constexpr uint8_t RESPONSE_SPEED_COUNT = sizeof(RESPONSE_SPEEDS);
+
+#if defined(USE_NUMBER) && defined(USE_LD2410S_PARAMETERS)
+class LD2410SNumber;
+#endif
+
 class LD2410SComponent final : public Component, public uart::UARTDevice {
 #ifdef USE_BINARY_SENSOR
  SUB_BINARY_SENSOR(target)
 #endif
+#ifdef USE_SENSOR
+  SUB_SENSOR_WITH_DEDUP(distance, uint16_t)
+#endif
+#ifdef USE_LD2410S_VERSION
+  SUB_TEXT_SENSOR(version)
+#endif
+#if defined(USE_SELECT) && defined(USE_LD2410S_PARAMETERS)
+  SUB_SELECT(response_speed)
+#endif

 public:
  void setup() override { this->status_set_warning(); }  // cleared once the module acknowledged the init sequence
  void loop() override;
  void dump_config() override;

+  /// Store a parameter in the module's units; loop() then writes all of them to the module.
+  /// Returns false, and changes nothing, until the module's own values have been read.
+#ifdef USE_LD2410S_PARAMETERS
+  bool set_parameter(Parameter parameter, uint8_t value);
+#ifdef USE_NUMBER
+  void set_number(Parameter parameter, LD2410SNumber *number) {
+    this->numbers_[static_cast<uint8_t>(parameter)] = number;
+  }
+#endif
+#endif
+
 protected:
  enum class FrameType : uint8_t { NONE, SHORT_DATA, STD_DATA, COMMAND };

@@ -32,6 +82,12 @@ class LD2410SComponent final : public Component, public uart::UARTDevice {
  /// Returns false for a data frame whose state byte is impossible, so it counts as dropped.
  bool handle_data_frame_(const uint8_t *payload, uint16_t len);
  void handle_command_ack_(const uint8_t *payload, uint16_t len);
+#ifdef USE_LD2410S_PARAMETERS
+  bool handle_parameters_(const uint8_t *values, uint16_t len);
+#endif
+#ifdef USE_LD2410S_VERSION
+  bool handle_version_(const uint8_t *values, uint16_t len);
+#endif
  void count_dropped_frame_() {
    if (this->dropped_frames_ < UINT8_MAX) {
      this->dropped_frames_++;
@@ -42,21 +98,41 @@ class LD2410SComponent final : public Component, public uart::UARTDevice {
    this->expected_len_ = 0;
    this->frame_type_ = FrameType::NONE;
  }
-  void run_init_sequence_(uint32_t now);
+  void start_sequence_(const uint16_t *sequence, uint8_t length, uint32_t now);
+  void restart_init_(uint32_t at);
+  void run_sequence_(uint32_t now);
+  uint16_t current_command_() const;
  void send_command_(uint16_t command);
-  void publish_target_(bool target);
+  void publish_target_(bool target, uint16_t distance);
+#ifdef USE_LD2410S_PARAMETERS
+  void publish_parameters_();
+#endif

+#if defined(USE_NUMBER) && defined(USE_LD2410S_PARAMETERS)
+  LD2410SNumber *numbers_[PARAMETER_COUNT]{};  // null for parameters without a number
+#endif
+
+  const uint16_t *sequence_{nullptr};  // PROGMEM; null while nothing is being sent
  uint32_t next_send_at_{0};
  uint32_t last_frame_at_{0};
+#ifdef USE_LD2410S_PARAMETERS
+  uint8_t parameters_[PARAMETER_COUNT]{};  // all fit a byte: gates, seconds, tenths of a hertz, speed
+#endif
  uint8_t rx_buffer_[RX_BUFFER_SIZE];
  uint8_t rx_len_{0};
  uint8_t expected_len_{0};
-  uint8_t init_step_{0};
-  uint8_t init_timeouts_{0};
+  uint8_t sequence_len_{0};
+  uint8_t step_{0};
+  uint8_t step_timeouts_{0};
  uint8_t dropped_frames_{0};  // since the last accepted data frame, saturates at 255
  FrameType frame_type_{FrameType::NONE};
  bool awaiting_ack_{false};
  bool rescanning_{false};
+  bool init_done_{false};
+#ifdef USE_LD2410S_PARAMETERS
+  bool parameters_known_{false};  // the module answered the parameter read at least once
+  bool parameters_dirty_{false};
+#endif
 };

 }  // namespace esphome::ld2410s
@@ -0,0 +1,32 @@
+#pragma once
+
+#include "esphome/core/defines.h"
+#if defined(USE_NUMBER) && defined(USE_LD2410S_PARAMETERS)
+
+#include "ld2410s.h"
+#include "esphome/components/number/number.h"
+
+namespace esphome::ld2410s {
+
+/// Edits one common parameter; scale converts the module's units to the number's.
+class LD2410SNumber final : public number::Number, public Parented<LD2410SComponent> {
+ public:
+  LD2410SNumber(Parameter parameter, float scale) : parameter_(parameter), scale_(scale) {}
+
+  void publish_raw(uint8_t raw) { this->publish_state(raw * this->scale_); }
+
+ protected:
+  void control(float value) override {
+    // Show the step the module got, not a value between two steps
+    const uint8_t raw = lroundf(value / this->scale_);  // the schema keeps every parameter within a byte
+    if (this->parent_->set_parameter(this->parameter_, raw))
+      this->publish_raw(raw);
+  }
+
+  const Parameter parameter_;
+  const float scale_;
+};
+
+}  // namespace esphome::ld2410s
+
+#endif  // USE_NUMBER && USE_LD2410S_PARAMETERS
@@ -0,0 +1,21 @@
+#pragma once
+
+#include "esphome/core/defines.h"
+#if defined(USE_SELECT) && defined(USE_LD2410S_PARAMETERS)
+
+#include "ld2410s.h"
+#include "esphome/components/select/select.h"
+
+namespace esphome::ld2410s {
+
+class LD2410SSelect final : public select::Select, public Parented<LD2410SComponent> {
+ protected:
+  void control(size_t index) override {
+    if (this->parent_->set_parameter(Parameter::PARAMETER_RESPONSE_SPEED, progmem_read_byte(&RESPONSE_SPEEDS[index])))
+      this->publish_state(index);
+  }
+};
+
+}  // namespace esphome::ld2410s
+
+#endif  // USE_SELECT && USE_LD2410S_PARAMETERS
@@ -0,0 +1,108 @@
+from functools import partial
+
+import esphome.codegen as cg
+from esphome.components import number
+import esphome.config_validation as cv
+from esphome.const import (
+    DEVICE_CLASS_DISTANCE,
+    DEVICE_CLASS_DURATION,
+    DEVICE_CLASS_FREQUENCY,
+    ENTITY_CATEGORY_CONFIG,
+    ICON_PULSE,
+    ICON_TIMELAPSE,
+    UNIT_HERTZ,
+    UNIT_METER,
+    UNIT_SECOND,
+)
+from esphome.types import ConfigType
+
+from . import CONF_LD2410S_ID, LD2410SComponent, Parameter, ld2410s_ns
+
+DEPENDENCIES = ["ld2410s"]
+
+CONF_DISTANCE_REPORTING_FREQUENCY = "distance_reporting_frequency"
+CONF_MAX_DISTANCE = "max_distance"
+CONF_MIN_DISTANCE = "min_distance"
+CONF_NO_DELAY = "no_delay"
+CONF_STATUS_REPORTING_FREQUENCY = "status_reporting_frequency"
+
+LD2410SNumber = ld2410s_ns.class_("LD2410SNumber", number.Number)
+
+# The module counts distances in 0.7 m gates and frequencies in tenths of a hertz
+GATE_WIDTH_M = 0.7
+FREQUENCY_SCALE = 0.1
+_DISTANCE_RANGE = {"min_value": 0, "max_value": 16 * GATE_WIDTH_M, "step": GATE_WIDTH_M}
+_FREQUENCY_RANGE = {"min_value": 0.5, "max_value": 8, "step": 0.5}
+
+
+def _number_schema(device_class: str, unit: str, icon: str) -> cv.Schema:
+    return number.number_schema(
+        LD2410SNumber,
+        device_class=device_class,
+        entity_category=ENTITY_CATEGORY_CONFIG,
+        unit_of_measurement=unit,
+        icon=icon,
+    )
+
+
+CONFIG_SCHEMA = {
+    cv.GenerateID(CONF_LD2410S_ID): cv.use_id(LD2410SComponent),
+    cv.Optional(CONF_MAX_DISTANCE): _number_schema(
+        DEVICE_CLASS_DISTANCE, UNIT_METER, "mdi:arrow-collapse-right"
+    ),
+    cv.Optional(CONF_MIN_DISTANCE): _number_schema(
+        DEVICE_CLASS_DISTANCE, UNIT_METER, "mdi:arrow-collapse-left"
+    ),
+    cv.Optional(CONF_NO_DELAY): _number_schema(
+        DEVICE_CLASS_DURATION, UNIT_SECOND, ICON_TIMELAPSE
+    ),
+    cv.Optional(CONF_STATUS_REPORTING_FREQUENCY): _number_schema(
+        DEVICE_CLASS_FREQUENCY, UNIT_HERTZ, ICON_PULSE
+    ),
+    cv.Optional(CONF_DISTANCE_REPORTING_FREQUENCY): _number_schema(
+        DEVICE_CLASS_FREQUENCY, UNIT_HERTZ, ICON_PULSE
+    ),
+}
+
+
+async def to_code(config: ConfigType) -> None:
+    cg.add_define("USE_LD2410S_PARAMETERS")
+    hub = await cg.get_variable(config[CONF_LD2410S_ID])
+    numbers = number.sub_numbers(config, parent=hub)
+    await numbers(
+        CONF_MAX_DISTANCE,
+        partial(hub.set_number, Parameter.PARAMETER_MAX_DISTANCE),
+        Parameter.PARAMETER_MAX_DISTANCE,
+        GATE_WIDTH_M,
+        **_DISTANCE_RANGE,
+    )
+    await numbers(
+        CONF_MIN_DISTANCE,
+        partial(hub.set_number, Parameter.PARAMETER_MIN_DISTANCE),
+        Parameter.PARAMETER_MIN_DISTANCE,
+        GATE_WIDTH_M,
+        **_DISTANCE_RANGE,
+    )
+    await numbers(
+        CONF_NO_DELAY,
+        partial(hub.set_number, Parameter.PARAMETER_NO_DELAY),
+        Parameter.PARAMETER_NO_DELAY,
+        1,
+        min_value=1,
+        max_value=120,
+        step=1,
+    )
+    await numbers(
+        CONF_STATUS_REPORTING_FREQUENCY,
+        partial(hub.set_number, Parameter.PARAMETER_STATUS_FREQUENCY),
+        Parameter.PARAMETER_STATUS_FREQUENCY,
+        FREQUENCY_SCALE,
+        **_FREQUENCY_RANGE,
+    )
+    await numbers(
+        CONF_DISTANCE_REPORTING_FREQUENCY,
+        partial(hub.set_number, Parameter.PARAMETER_DISTANCE_FREQUENCY),
+        Parameter.PARAMETER_DISTANCE_FREQUENCY,
+        FREQUENCY_SCALE,
+        **_FREQUENCY_RANGE,
+    )
@@ -0,0 +1,31 @@
+import esphome.codegen as cg
+from esphome.components import select
+import esphome.config_validation as cv
+from esphome.const import ENTITY_CATEGORY_CONFIG
+from esphome.types import ConfigType
+
+from . import CONF_LD2410S_ID, LD2410SComponent, ld2410s_ns
+
+DEPENDENCIES = ["ld2410s"]
+
+CONF_RESPONSE_SPEED = "response_speed"
+
+LD2410SSelect = ld2410s_ns.class_("LD2410SSelect", select.Select)
+
+CONFIG_SCHEMA = {
+    cv.GenerateID(CONF_LD2410S_ID): cv.use_id(LD2410SComponent),
+    cv.Required(CONF_RESPONSE_SPEED): select.select_schema(
+        LD2410SSelect,
+        entity_category=ENTITY_CATEGORY_CONFIG,
+        icon="mdi:speedometer",
+    ),
+}
+
+
+async def to_code(config: ConfigType) -> None:
+    cg.add_define("USE_LD2410S_PARAMETERS")
+    hub = await cg.get_variable(config[CONF_LD2410S_ID])
+    selects = select.sub_selects(config, parent=hub)
+    await selects(
+        CONF_RESPONSE_SPEED, hub.set_response_speed_select, options=["Normal", "Fast"]
+    )
@@ -0,0 +1,32 @@
+import esphome.codegen as cg
+from esphome.components import sensor
+import esphome.config_validation as cv
+from esphome.const import (
+    CONF_DISTANCE,
+    DEVICE_CLASS_DISTANCE,
+    ICON_SIGNAL_DISTANCE_VARIANT,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_CENTIMETER,
+)
+from esphome.types import ConfigType
+
+from . import CONF_LD2410S_ID, LD2410SComponent
+
+DEPENDENCIES = ["ld2410s"]
+
+CONFIG_SCHEMA = {
+    cv.GenerateID(CONF_LD2410S_ID): cv.use_id(LD2410SComponent),
+    cv.Required(CONF_DISTANCE): sensor.sensor_schema(
+        unit_of_measurement=UNIT_CENTIMETER,
+        icon=ICON_SIGNAL_DISTANCE_VARIANT,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_DISTANCE,
+        state_class=STATE_CLASS_MEASUREMENT,
+    ),
+}
+
+
+async def to_code(config: ConfigType) -> None:
+    hub = await cg.get_variable(config[CONF_LD2410S_ID])
+    sensors = sensor.sub_sensors(config)
+    await sensors(CONF_DISTANCE, hub.set_distance_sensor)
@@ -0,0 +1,23 @@
+import esphome.codegen as cg
+from esphome.components import text_sensor
+import esphome.config_validation as cv
+from esphome.const import CONF_VERSION, ENTITY_CATEGORY_DIAGNOSTIC, ICON_CHIP
+from esphome.types import ConfigType
+
+from . import CONF_LD2410S_ID, LD2410SComponent
+
+DEPENDENCIES = ["ld2410s"]
+
+CONFIG_SCHEMA = {
+    cv.GenerateID(CONF_LD2410S_ID): cv.use_id(LD2410SComponent),
+    cv.Required(CONF_VERSION): text_sensor.text_sensor_schema(
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC, icon=ICON_CHIP
+    ),
+}
+
+
+async def to_code(config: ConfigType) -> None:
+    cg.add_define("USE_LD2410S_VERSION")
+    hub = await cg.get_variable(config[CONF_LD2410S_ID])
+    text_sensors = text_sensor.sub_text_sensors(config)
+    await text_sensors(CONF_VERSION, hub.set_version_text_sensor)
@@ -25,6 +25,7 @@ from esphome.components.image import (
    ImageBinary,
    ImageGrayscale,
    ImageRGB,
+    ImageRGB111,
    ImageRGB565,
    get_image_metadata,
 )
@@ -43,6 +44,7 @@ from esphome.const import (
    CONF_ROTATION,
    CONF_TIMEOUT,
    CONF_TRIGGER_ID,
+    CONF_TYPE,
 )
 from esphome.core import CORE, ID, Lambda
 from esphome.cpp_generator import MockObj
@@ -293,6 +295,21 @@ def final_validation(config_list):
    if len(config_list) != 1:
        multi_conf_validate(config_list)

+    for img in get_lv_images_used():
+        path = global_config.get_path_for_id(img.id)[:-1]
+        # An image nested in another platform (sendspin's current_image) takes its type from the parent
+        while path:
+            image_conf = global_config.get_config_for_path(path)
+            if isinstance(image_conf, dict) and CONF_TYPE in image_conf:
+                break
+            path = path[:-1]
+        else:
+            continue
+        if IMAGE_TYPE.get(image_conf[CONF_TYPE]) is ImageRGB111:
+            raise cv.FinalExternalInvalid(
+                f"Image '{img}': LVGL does not support RGB111 images, use RGB565 or RGB instead",
+                path + [CONF_TYPE],
+            )
    for w in get_focused_widgets():
        path = global_config.get_path_for_id(w)
        widget_conf = global_config.get_config_for_path(path[:-1])
@@ -85,7 +85,7 @@ class LvColorPickerType : public LvCompound {
    if (left != nullptr) {
      lv_obj_set_style_align(left, LV_ALIGN_LEFT_MID, LV_PART_MAIN);
      // A narrow hue column may be slimmer than its label.
-      lv_obj_add_flag(left, LV_OBJ_FLAG_OVERFLOW_VISIBLE);
+      lv_obj_set_flag(left, LV_OBJ_FLAG_OVERFLOW_VISIBLE, true);
    }

    // The text rows keep their natural height and the bars between them take what is left,
@@ -233,7 +233,7 @@ class LvColorPickerType : public LvCompound {
  static lv_obj_t *create_box(lv_obj_t *parent) {
    auto *obj = lv_obj_create(parent);
    lv_obj_add_style(obj, &plain_box, LV_PART_MAIN);
-    lv_obj_remove_flag(obj, LV_OBJ_FLAG_SCROLLABLE);
+    lv_obj_set_flag(obj, LV_OBJ_FLAG_SCROLLABLE, false);
    return obj;
  }

@@ -326,7 +326,7 @@ class LvColorPickerType : public LvCompound {
    lv_obj_set_style_radius(disc, LV_RADIUS_CIRCLE, LV_PART_MAIN);
    lv_obj_set_style_bg_opa(disc, LV_OPA_COVER, LV_PART_MAIN);
    lv_obj_set_style_bg_grad(disc, grad, LV_PART_MAIN);
-    lv_obj_remove_flag(disc, LV_OBJ_FLAG_SCROLLABLE);
+    lv_obj_set_flag(disc, LV_OBJ_FLAG_SCROLLABLE, false);
    return disc;
  }

@@ -336,7 +336,7 @@ class LvColorPickerType : public LvCompound {
    this->wheel_ = create_disc(container, &wheel_hue_grad);
    // Not clickable, so touches fall through to the wheel underneath.
    auto *overlay = create_disc(this->wheel_, &wheel_white_grad);
-    lv_obj_remove_flag(overlay, LV_OBJ_FLAG_CLICKABLE);
+    lv_obj_set_flag(overlay, LV_OBJ_FLAG_CLICKABLE, false);

    this->wheel_handle_ = lv_obj_create(this->wheel_);
    lv_obj_set_size(this->wheel_handle_, WHEEL_HANDLE_SIZE, WHEEL_HANDLE_SIZE);
@@ -345,8 +345,8 @@ class LvColorPickerType : public LvCompound {
    lv_obj_set_style_bg_opa(this->wheel_handle_, LV_OPA_TRANSP, LV_PART_MAIN);
    lv_obj_set_style_border_width(this->wheel_handle_, 2, LV_PART_MAIN);
    lv_obj_set_style_border_color(this->wheel_handle_, lv_color_white(), LV_PART_MAIN);
-    lv_obj_remove_flag(this->wheel_handle_, LV_OBJ_FLAG_CLICKABLE);
-    lv_obj_remove_flag(this->wheel_handle_, LV_OBJ_FLAG_SCROLLABLE);
+    lv_obj_set_flag(this->wheel_handle_, LV_OBJ_FLAG_CLICKABLE, false);
+    lv_obj_set_flag(this->wheel_handle_, LV_OBJ_FLAG_SCROLLABLE, false);

    // PRESSED as well, so a tap takes effect without the finger moving.
    lv_obj_add_event_cb(this->wheel_, wheel_touch_cb, LV_EVENT_PRESSED, this);
@@ -359,7 +359,7 @@ class LvColorPickerType : public LvCompound {

  void add_value_label_(SliderIndex index, lv_color_t color) {
    auto *slider = this->sliders_[index];
-    lv_obj_add_flag(slider, LV_OBJ_FLAG_OVERFLOW_VISIBLE);
+    lv_obj_set_flag(slider, LV_OBJ_FLAG_OVERFLOW_VISIBLE, true);
    auto *label = lv_label_create(slider);
    this->values_[index] = label;
    lv_obj_set_style_align(label, LV_ALIGN_CENTER, LV_PART_MAIN);
@@ -509,7 +509,7 @@ class LvColorPickerType : public LvCompound {
  static void bubble_events(lv_obj_t *obj) {
    for (uint32_t i = 0; i < lv_obj_get_child_count(obj); i++) {
      auto *child = lv_obj_get_child(obj, i);
-      lv_obj_add_flag(child, LV_OBJ_FLAG_EVENT_BUBBLE);
+      lv_obj_set_flag(child, LV_OBJ_FLAG_EVENT_BUBBLE, true);
      bubble_events(child);
    }
  }
@@ -214,7 +214,7 @@ enum class Orientation : uint8_t {
 };

 class LvglComponent final : public PollingComponent {
-  constexpr static const char *const TAG = "lvgl";
+  constexpr static const char *const TAG = "lvgl";  // NOLINT: lvgl does not build for ESP8266

 public:
  LvglComponent(std::vector<display::Display *> displays, float buffer_frac, bool full_refresh, int draw_rounding,
@@ -19,7 +19,7 @@ using alloc_string_t = std::basic_string<char, std::char_traits<char>, RAMAlloca
 * @tparam V The type of the value in the mapping. Should be a basic type or pointer.
 */

-static const char *const TAG = "mapping";
+ESPHOME_LOG_TAG(TAG, "mapping");

 template<typename K, typename V> class Mapping {
 public:
@@ -20,6 +20,10 @@
 #ifdef USE_DASHBOARD_IMPORT
 #include "esphome/components/dashboard_import/dashboard_import.h"
 #endif
+#ifdef USE_MDNS_DYNAMIC_NETWORK_TXT
+#include "esphome/components/ethernet/ethernet_component.h"
+#include "esphome/components/wifi/wifi_component.h"
+#endif

 namespace esphome::mdns {

@@ -39,6 +43,45 @@ MDNS_STATIC_CONST_CHAR(SERVICE_TCP, "_tcp");
 // Wrap build-time defines into flash storage
 MDNS_STATIC_CONST_CHAR(VALUE_VERSION, ESPHOME_VERSION);

+#ifdef USE_MDNS_DYNAMIC_NETWORK_TXT
+MDNS_STATIC_CONST_CHAR(NETWORK_WIFI, "wifi");
+MDNS_STATIC_CONST_CHAR(NETWORK_ETHERNET, "ethernet");
+
+// Same order as the default route in NetworkComponent::loop()
+const char *MDNSComponent::connected_network_() const {
+  const bool ethernet = ethernet::global_eth_component->is_connected();
+  const bool wifi = wifi::global_wifi_component->is_connected();
+#ifdef USE_NETWORK_PRIMARY_INTERFACE_WIFI
+  if (wifi)
+    return NETWORK_WIFI;
+#endif
+  if (ethernet)
+    return NETWORK_ETHERNET;
+  if (wifi)
+    return NETWORK_WIFI;
+  return nullptr;
+}
+
+void MDNSComponent::update_network_txt_() {
+  if (this->network_txt_ == nullptr)
+    return;
+  // With no interface connected, keep the last value instead of flapping to wifi
+  const char *network = this->connected_network_();
+  if (network == nullptr || network == this->network_txt_)
+    return;
+  if (!this->publish_network_txt_(network)) {
+    // The _esphomelib service is missing, so a retry would fail too
+    this->network_txt_ = nullptr;
+    return;
+  }
+  ESP_LOGD(TAG, "Network TXT: %s", network);
+  this->network_txt_ = network;
+#ifdef USE_MDNS_STORE_SERVICES
+  this->network_record_->value = MDNS_STR(network);
+#endif
+}
+#endif
+
 void MDNSComponent::setup_buffers_and_register_(PlatformRegisterFn platform_register) {
 #ifdef USE_MDNS_STORE_SERVICES
  auto &services = this->services_;
@@ -160,7 +203,15 @@ void MDNSComponent::compile_records_(StaticVector<MDNSService, MDNS_SERVICE_COUN

    txt_records.push_back({MDNS_STR(TXT_BOARD), MDNS_STR(VALUE_BOARD)});

-#if defined(USE_WIFI)
+#ifdef USE_MDNS_DYNAMIC_NETWORK_TXT
+    const char *network = this->connected_network_();
+    this->network_txt_ = network != nullptr ? network : NETWORK_WIFI;
+    txt_records.push_back({MDNS_STR(TXT_NETWORK), MDNS_STR(this->network_txt_)});
+#ifdef USE_MDNS_STORE_SERVICES
+    // services is services_ here, which never reallocates
+    this->network_record_ = &txt_records.back();
+#endif
+#elif defined(USE_WIFI)
    MDNS_STATIC_CONST_CHAR(NETWORK_WIFI, "wifi");
    txt_records.push_back({MDNS_STR(TXT_NETWORK), MDNS_STR(NETWORK_WIFI)});
 #elif defined(USE_ETHERNET)
@@ -32,6 +32,12 @@
 #define USE_MDNS_DEVICE_INFO_TXT
 #endif

+// With both wifi and ethernet, the _esphomelib "network" TXT value follows the connected interface.
+// OpenThread hands its services to the SRP client once, so it keeps the fixed value.
+#if defined(USE_API) && defined(USE_WIFI) && defined(USE_ETHERNET) && !defined(USE_OPENTHREAD)
+#define USE_MDNS_DYNAMIC_NETWORK_TXT
+#endif
+
 namespace esphome::mdns {

 // Helper struct that identifies strings that may be stored in flash storage (similar to LogString)
@@ -150,6 +156,22 @@ class MDNSComponent final : public Component

  void setup_buffers_and_register_(PlatformRegisterFn platform_register);

+#ifdef USE_MDNS_DYNAMIC_NETWORK_TXT
+  static constexpr uint32_t NETWORK_TXT_CHECK_INTERVAL_MS = 1000;
+  /// The first connected interface in network: priority order ("ethernet" or "wifi"), else nullptr.
+  const char *connected_network_() const;
+  /// Check the connected interface and publish a changed "network" TXT value.
+  void update_network_txt_();
+  /// Platform-specific: replace the "network" TXT value of the registered _esphomelib service.
+  bool publish_network_txt_(const char *network);
+  /// Advertised value; nullptr until the _esphomelib service is registered, and after a failed publish.
+  const char *network_txt_{nullptr};
+#ifdef USE_MDNS_STORE_SERVICES
+  /// The "network" record in services_, kept in step with network_txt_.
+  MDNSTXTRecord *network_record_{nullptr};
+#endif
+#endif
+
 #ifdef USE_MDNS_DYNAMIC_TXT
  /// Storage for runtime-generated TXT values from user lambdas
  /// Pre-sized at compile time via MDNS_DYNAMIC_TXT_COUNT to avoid heap allocations.
@@ -89,7 +89,24 @@ bool MDNSComponent::set_service_enabled(const char *service_type, const char *pr
 }
 #endif  // USE_MDNS_SUPPORTS_ENABLE_DISABLE && !USE_OPENTHREAD

-void MDNSComponent::setup() { this->setup_buffers_and_register_(register_esp32); }
+#ifdef USE_MDNS_DYNAMIC_NETWORK_TXT
+bool MDNSComponent::publish_network_txt_(const char *network) {
+  // ESP-IDF copies the value and announces the changed record
+  esp_err_t err = mdns_service_txt_item_set("_esphomelib", "_tcp", "network", network);
+  if (err != ESP_OK) {
+    ESP_LOGW(TAG, "Failed to update network TXT: %s", esp_err_to_name(err));
+    return false;
+  }
+  return true;
+}
+#endif
+
+void MDNSComponent::setup() {
+  this->setup_buffers_and_register_(register_esp32);
+#ifdef USE_MDNS_DYNAMIC_NETWORK_TXT
+  this->set_interval(NETWORK_TXT_CHECK_INTERVAL_MS, [this]() { this->update_network_txt_(); });
+#endif
+}

 void MDNSComponent::on_shutdown() {
 #ifndef USE_OPENTHREAD
@@ -46,7 +46,26 @@ void MDNSComponent::start_polling_window_() {
 }
 #endif

+#ifdef USE_MDNS_DYNAMIC_NETWORK_TXT
+ESPHOME_LOG_TAG(TAG, "mdns");
+
+bool MDNSComponent::publish_network_txt_(const char *network) {
+  // LEAmDNS replaces the value of an existing key; announce() sends the change
+  if (!MDNS.addServiceTxt("esphomelib", "tcp", "network", network)) {
+    ESP_LOGW(TAG, "Failed to update network TXT");
+    return false;
+  }
+  MDNS.announce();
+  this->start_polling_window_();
+  return true;
+}
+#endif
+
 void MDNSComponent::setup() {
+#ifdef USE_MDNS_DYNAMIC_NETWORK_TXT
+  // No-op until the first IP-up event registers the services
+  this->set_interval(NETWORK_TXT_CHECK_INTERVAL_MS, [this]() { this->update_network_txt_(); });
+#endif
  // arduino-pico stubs out LwipIntf::stateUpCB (the netif status callback LEAmDNS uses
  // on ESP8266 for auto-restart), so we must drive begin()/notifyAPChange() from our
  // own IP state listener. Both WiFi and Ethernet have the same listener signature —
@@ -5,7 +5,7 @@

 namespace esphome::midea::ac {

-const char *const Constants::TAG = "midea";
+const char Constants::TAG[] PROGMEM = "midea";
 const char *const Constants::FREEZE_PROTECTION = "Freeze Protection";
 const char *const Constants::SILENT = "Silent";
 const char *const Constants::TURBO = "Turbo";
@@ -17,7 +17,7 @@ using MideaPreset = dudanov::midea::ac::Preset;

 class Constants {
 public:
-  static const char *const TAG;
+  static const char TAG[];  // PROGMEM, like ESPHOME_LOG_TAG
  static const char *const FREEZE_PROTECTION;
  static const char *const SILENT;
  static const char *const TURBO;
@@ -18,7 +18,7 @@

 namespace esphome::mipi_dsi {

-constexpr static const char *const TAG = "display.mipi_dsi";
+ESPHOME_LOG_TAG(TAG, "display.mipi_dsi");
 const uint8_t SW_RESET_CMD = 0x01;
 const uint8_t SLEEP_OUT = 0x11;
 const uint8_t SDIR_CMD = 0xC7;
@@ -2,6 +2,7 @@

 #if defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32P4) || defined(USE_ESP32_VARIANT_ESP32S31)
 #include "esphome/core/gpio.h"
+#include "esphome/core/log.h"
 #include "esphome/components/display/display.h"
 #include <esp_lcd_panel_rgb.h>
 #ifdef USE_SPI
@@ -10,7 +11,7 @@

 namespace esphome::mipi_rgb {

-constexpr static const char *const TAG = "display.mipi_rgb";
+ESPHOME_LOG_TAG(TAG, "display.mipi_rgb");
 const uint8_t SW_RESET_CMD = 0x01;
 const uint8_t SLEEP_OUT = 0x11;
 const uint8_t SDIR_CMD = 0xC7;
@@ -7,10 +7,11 @@
 #include "esphome/components/display/display_color_utils.h"
 #include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/log.h"

 namespace esphome::mipi_spi {

-constexpr static const char *const TAG = "display.mipi_spi";
+ESPHOME_LOG_TAG(TAG, "display.mipi_spi");

 // Maximum bytes to log for commands (truncated if larger)
 static constexpr size_t MIPI_SPI_MAX_CMD_LOG_BYTES = 64;
@@ -1040,11 +1040,13 @@ def run_compile(args, config: ConfigType) -> bool:
    framework_ver = CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION]
    bootloader = zephyr_data()[KEY_BOOTLOADER]

-    # (dev_type, sd_req) per bootloader — values from Nordic SoftDevice release notes
+    # (dev_type, sd_req) per bootloader — values from Nordic SoftDevice release notes.
+    # The bootloader resets on a package whose sd_req does not list its SoftDevice,
+    # so v7 accepts S140 7.0.1, 7.2.0 and 7.3.0 (e.g. Seeed XIAO nRF52840).
    _GENPKG_PARAMS = {
        BOOTLOADER_ADAFRUIT_NRF52_SD132: ("0x0051", "0x009D"),
        BOOTLOADER_ADAFRUIT_NRF52_SD140_V6: ("0x0052", "0x00B6"),
-        BOOTLOADER_ADAFRUIT_NRF52_SD140_V7: ("0x0052", "0x00CA"),
+        BOOTLOADER_ADAFRUIT_NRF52_SD140_V7: ("0x0052", "0x00CA,0x0100,0x0123"),
    }
    # UF2 family IDs — nRF52832 vs nRF52840 per SoftDevice variant
    _UF2_FAMILY_IDS = {
@@ -1,3 +1,4 @@
+import re
 from typing import Any

 from esphome import automation
@@ -44,9 +45,12 @@ from esphome.core import (
    coroutine_with_priority,
 )
 import esphome.final_validate as fv
+from esphome.helpers import write_file_if_changed
 from esphome.types import ConfigType
+from esphome.writer import clean_build

 from .const import (
+    CONF_CORE_OPTIONS,
    CONF_DEVICE_TYPE,
    CONF_EXT_PAN_ID,
    CONF_FORCE_DATASET,
@@ -59,6 +63,7 @@ from .const import (
    CONF_PSKC,
    CONF_SRP_ID,
    CONF_TLV,
+    OPENTHREAD_CONFIG_PREFIX,
 )

 CODEOWNERS = ["@mrene"]
@@ -84,6 +89,10 @@ CONF_DEVICE_TYPES = [
    "MTD",
 ]

+OT_HEADER_DIR = "openthread"
+OT_HEADER_FILE = "esphome_ot_config.h"
+OT_CORE_OPTION_NAME = re.compile(r"[A-Z0-9_]+")
+

 def _validate_txpower(value: Any) -> int | float:
    if CORE.is_esp32:
@@ -158,6 +167,31 @@ def set_sdkconfig_options(config: ConfigType) -> None:
    add_idf_sdkconfig_option(f"CONFIG_OPENTHREAD_{config.get(CONF_DEVICE_TYPE)}", True)


+def _write_custom_header(config: ConfigType) -> None:
+    """Write core_options to the OpenThread custom header."""
+    if not (options := config.get(CONF_CORE_OPTIONS)):
+        return
+
+    add_idf_sdkconfig_option("CONFIG_OPENTHREAD_HEADER_CUSTOM", True)
+    # IDF resolves the path relative to the project (build) directory.
+    add_idf_sdkconfig_option("CONFIG_OPENTHREAD_CUSTOM_HEADER_PATH", OT_HEADER_DIR)
+    add_idf_sdkconfig_option(
+        "CONFIG_OPENTHREAD_CUSTOM_HEADER_FILE_NAME", OT_HEADER_FILE
+    )
+    content = (
+        "// Auto-generated by ESPHome from openthread core_options - do not edit\n"
+        "#pragma once\n\n"
+        + "".join(
+            f"#define {name} {value}\n" for name, value in sorted(options.items())
+        )
+    )
+    # PlatformIO does not track this header as an OpenThread input; the esp-idf
+    # toolchain does.
+    header_path = CORE.relative_build_path(OT_HEADER_DIR, OT_HEADER_FILE)
+    if write_file_if_changed(header_path, content) and not CORE.using_toolchain_esp_idf:
+        clean_build(clear_pio_cache=False)
+
+
 openthread_ns = cg.esphome_ns.namespace("openthread")
 OpenThreadComponent = openthread_ns.class_("OpenThreadComponent", cg.Component)
 OpenThreadSrpComponent = openthread_ns.class_("OpenThreadSrpComponent", cg.Component)
@@ -220,6 +254,34 @@ def _validate_platform(config: ConfigType) -> ConfigType:
    )(config)


+def _validate_core_option_names(options: dict[str, str]) -> dict[str, str]:
+    for name in options:
+        if (
+            not name.startswith(OPENTHREAD_CONFIG_PREFIX)
+            or name == OPENTHREAD_CONFIG_PREFIX
+        ):
+            raise cv.Invalid(
+                f"'{name}' is not an OpenThread core option; names must be "
+                f"{OPENTHREAD_CONFIG_PREFIX} followed by the option name",
+                path=[name],
+            )
+        if not OT_CORE_OPTION_NAME.fullmatch(name):
+            raise cv.Invalid(f"'{name}' may only contain A-Z, 0-9 and _", path=[name])
+    return options
+
+
+def _validate_core_option_value(value: Any) -> str:
+    value = cv.string_strict(value)
+    if not value.strip():
+        raise cv.Invalid("OpenThread core option value must not be empty")
+    if "\n" in value or "\r" in value:
+        raise cv.Invalid("OpenThread core option value must be a single line")
+    # GCC treats a backslash followed by spaces as a line continuation too.
+    if value.rstrip().endswith("\\"):
+        raise cv.Invalid("OpenThread core option value must not end with \\")
+    return value
+
+
 def _validate_tlv_hex(value: Any) -> str:
    s = cv.string_strict(value)
    if len(s) % 2 != 0:
@@ -252,6 +314,11 @@ CONFIG_SCHEMA = cv.All(
                _validate_txpower,
            ),
            cv.Optional(CONF_POLL_PERIOD): cv.positive_time_period_milliseconds,
+            cv.Optional(CONF_CORE_OPTIONS): cv.All(
+                cv.only_on_esp32,
+                {cv.string_strict: _validate_core_option_value},
+                _validate_core_option_names,
+            ),
        }
    ).extend(_CONNECTION_SCHEMA),
    cv.has_exactly_one_key(CONF_NETWORK_KEY, CONF_TLV),
@@ -325,6 +392,7 @@ async def to_code(config: ConfigType) -> None:

    if CORE.is_esp32:
        set_sdkconfig_options(config)
+        _write_custom_header(config)
    elif CORE.using_zephyr:
        # Crypto through PSA: mbedtls, plus Oberon from SDK 2.7
        include_west_project("mbedtls")
@@ -1,3 +1,4 @@
+CONF_CORE_OPTIONS = "core_options"
 CONF_DEVICE_TYPE = "device_type"
 CONF_EXT_PAN_ID = "ext_pan_id"
 CONF_FORCE_DATASET = "force_dataset"
@@ -10,3 +11,5 @@ CONF_POLL_PERIOD = "poll_period"
 CONF_PSKC = "pskc"
 CONF_SRP_ID = "srp_id"
 CONF_TLV = "tlv"
+
+OPENTHREAD_CONFIG_PREFIX = "OPENTHREAD_CONFIG_"
@@ -0,0 +1,79 @@
+from esphome import pins
+import esphome.codegen as cg
+from esphome.components import i2c
+import esphome.config_validation as cv
+from esphome.const import (
+    CONF_ID,
+    CONF_INPUT,
+    CONF_INTERRUPT_PIN,
+    CONF_INVERTED,
+    CONF_MODE,
+    CONF_NUMBER,
+    CONF_OUTPUT,
+)
+from esphome.cpp_generator import MockObj
+from esphome.types import ConfigType
+
+AUTO_LOAD = ["gpio_expander"]
+CODEOWNERS = ["@ssieb", "@ajfriesen"]
+DEPENDENCIES = ["i2c"]
+DOMAIN = "pca9505"
+MULTI_CONF = True
+
+pca9505_ns = cg.esphome_ns.namespace("pca9505")
+
+PCA9505Component = pca9505_ns.class_("PCA9505Component", cg.Component, i2c.I2CDevice)
+PCA9505GPIOPin = pca9505_ns.class_(
+    "PCA9505GPIOPin", cg.GPIOPin, cg.Parented.template(PCA9505Component)
+)
+
+CONF_PCA9505 = "pca9505"
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.Required(CONF_ID): cv.declare_id(PCA9505Component),
+            cv.Optional(CONF_INTERRUPT_PIN): pins.internal_gpio_input_pin_schema,
+        }
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+    .extend(i2c.i2c_device_schema(0x20))
+)
+
+
+async def to_code(config: ConfigType) -> None:
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await i2c.register_i2c_device(var, config)
+    if interrupt_pin := config.get(CONF_INTERRUPT_PIN):
+        cg.add(var.set_interrupt_pin(await cg.gpio_pin_expression(interrupt_pin)))
+
+
+def validate_mode(value: ConfigType) -> ConfigType:
+    if not (value[CONF_INPUT] or value[CONF_OUTPUT]):
+        raise cv.Invalid("Mode must be either input or output")
+    if value[CONF_INPUT] and value[CONF_OUTPUT]:
+        raise cv.Invalid("Mode must be either input or output")
+    return value
+
+
+PCA9505_PIN_SCHEMA = pins.gpio_base_schema(
+    PCA9505GPIOPin,
+    cv.int_range(min=0, max=39),
+    modes=[CONF_INPUT, CONF_OUTPUT],
+    mode_validator=validate_mode,
+).extend(
+    {
+        cv.Required(CONF_PCA9505): cv.use_id(PCA9505Component),
+    }
+)
+
+
+@pins.PIN_SCHEMA_REGISTRY.register(CONF_PCA9505, PCA9505_PIN_SCHEMA)
+async def pca9505_pin_to_code(config: ConfigType) -> MockObj:
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_parented(var, config[CONF_PCA9505])
+
+    cg.add(var.set_pin(config[CONF_NUMBER]))
+    cg.add(var.set_inverted(config[CONF_INVERTED]))
+    cg.add(var.set_flags(pins.gpio_flags_expr(config[CONF_MODE])))
+    return var
@@ -0,0 +1,165 @@
+#include "pca9505.h"
+#include "esphome/core/log.h"
+
+namespace esphome::pca9505 {
+
+// Each register block holds one byte per port. Add the port number to reach a single
+// port, or set the auto-increment bit to transfer the whole block in one go.
+static constexpr uint8_t INPUT_REG = 0x00;
+static constexpr uint8_t OUTPUT_REG = 0x08;
+static constexpr uint8_t INVERT_REG = 0x10;
+static constexpr uint8_t CONFIG_REG = 0x18;
+static constexpr uint8_t MASK_REG = 0x20;
+static constexpr uint8_t AUTO_INCREMENT = 0x80;
+
+ESPHOME_LOG_TAG(TAG, "pca9505");
+
+void PCA9505Component::setup() {
+  // Test to see if device exists
+  if (!this->read_bank_(0)) {
+    ESP_LOGE(TAG, "PCA9505 not detected at 0x%02X", this->address_);
+    this->mark_failed();
+    return;
+  }
+
+  // No polarity inversion
+  this->write_all_banks_(INVERT_REG, 0x00);
+  // All outputs low, before anything is switched to being an output
+  this->write_all_banks_(OUTPUT_REG, 0x00);
+  // All inputs at initialization. The part sees a 1 as an input, so this is the
+  // inverse of config_, which is all zeroes here.
+  this->write_all_banks_(CONFIG_REG, 0xFF);
+
+  // Mask every interrupt. This must be written, not assumed: the chip keeps its
+  // registers through an MCU reboot, so a previous run may have left pins unmasked.
+  for (uint8_t &bank : this->mask_) {
+    bank = 0xFF;
+  }
+  this->write_all_banks_(MASK_REG, 0xFF);
+
+  if (this->interrupt_pin_ != nullptr) {
+    this->interrupt_pin_->setup();
+    this->interrupt_pin_->attach_interrupt(&PCA9505Component::gpio_intr, this, gpio::INTERRUPT_FALLING_EDGE);
+    // Don't invalidate cache on read - only invalidate when interrupt fires
+    this->set_invalidate_on_read_(false);
+  }
+
+  // Nothing to poll until pin_mode() registers an input pin.
+  this->disable_loop();
+}
+
+void IRAM_ATTR PCA9505Component::gpio_intr(PCA9505Component *arg) { arg->enable_loop_soon_any_context(); }
+
+void PCA9505Component::loop() {
+  // Invalidate the cache so the next digital_read() triggers a fresh I2C read
+  this->reset_pin_cache_();
+  // Only disable the loop once INT has actually gone HIGH. Input transitions that straddle the
+  // I2C read leave INT asserted without re-firing a falling edge, which would strand us with
+  // stale state forever; keep looping until the line is released so we self-heal.
+  if (this->interrupt_pin_ != nullptr && this->interrupt_pin_->digital_read()) {
+    this->disable_loop();
+  }
+}
+
+void PCA9505Component::dump_config() {
+  ESP_LOGCONFIG(TAG, "PCA9505:");
+  LOG_PIN("  Interrupt Pin: ", this->interrupt_pin_);
+  LOG_I2C_DEVICE(this)
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
+  }
+}
+
+bool PCA9505Component::digital_read_hw(uint8_t pin) { return this->read_bank_(pin / 8); }
+
+bool PCA9505Component::digital_read_cache(uint8_t pin) { return this->input_[pin / 8] & (1 << (pin % 8)); }
+
+void PCA9505Component::digital_write_hw(uint8_t pin, bool value) {
+  const uint8_t bank = pin / 8;
+  const uint8_t mask = 1 << (pin % 8);
+  if (value) {
+    this->output_[bank] |= mask;
+  } else {
+    this->output_[bank] &= ~mask;
+  }
+  this->write_bank_(OUTPUT_REG, bank, this->output_[bank]);
+}
+
+void PCA9505Component::pin_mode(uint8_t pin, gpio::Flags flags) {
+  const uint8_t bank = pin / 8;
+  const uint8_t mask = 1 << (pin % 8);
+  if (flags & gpio::FLAG_INPUT) {
+    this->config_[bank] &= ~mask;
+    // An input may raise INT; the polling loop is only needed when there is no interrupt pin.
+    this->mask_[bank] &= ~mask;
+    if (this->interrupt_pin_ == nullptr) {
+      this->enable_loop();
+    }
+  } else if (flags & gpio::FLAG_OUTPUT) {
+    this->config_[bank] |= mask;
+    // An output must never raise INT.
+    this->mask_[bank] |= mask;
+  }
+  // Invert as the part sees a 1 as an input
+  this->write_bank_(CONFIG_REG, bank, ~this->config_[bank]);
+  // Without an interrupt pin INT is unconnected, so the masks written at setup can stay
+  if (this->interrupt_pin_ != nullptr) {
+    this->write_bank_(MASK_REG, bank, this->mask_[bank]);
+  }
+}
+
+bool PCA9505Component::read_bank_(uint8_t bank) {
+  if (this->is_failed())
+    return false;
+
+  if (this->read_register(INPUT_REG + bank, &this->input_[bank], 1) != i2c::ERROR_OK) {
+    this->status_set_warning(LOG_STR("Failed to read input register"));
+    return false;
+  }
+  this->status_clear_warning();
+  return true;
+}
+
+bool PCA9505Component::write_bank_(uint8_t reg, uint8_t bank, uint8_t value) {
+  if (this->is_failed())
+    return false;
+
+  if (this->write_register(reg + bank, &value, 1) != i2c::ERROR_OK) {
+    this->status_set_warning(LOG_STR("Failed to write register"));
+    return false;
+  }
+  this->status_clear_warning();
+  return true;
+}
+
+bool PCA9505Component::write_all_banks_(uint8_t reg, uint8_t value) {
+  if (this->is_failed())
+    return false;
+
+  uint8_t values[BANK_COUNT];
+  for (uint8_t &bank : values) {
+    bank = value;
+  }
+  if (this->write_register(reg | AUTO_INCREMENT, values, sizeof(values)) != i2c::ERROR_OK) {
+    this->status_set_warning(LOG_STR("Failed to write register"));
+    return false;
+  }
+  this->status_clear_warning();
+  return true;
+}
+
+float PCA9505Component::get_setup_priority() const { return setup_priority::IO; }
+
+void PCA9505GPIOPin::setup() { this->pin_mode(this->flags_); }
+
+void PCA9505GPIOPin::pin_mode(gpio::Flags flags) { this->parent_->pin_mode(this->pin_, flags); }
+
+bool PCA9505GPIOPin::digital_read() { return this->parent_->digital_read(this->pin_) != this->inverted_; }
+
+void PCA9505GPIOPin::digital_write(bool value) { this->parent_->digital_write(this->pin_, value != this->inverted_); }
+
+size_t PCA9505GPIOPin::dump_summary(char *buffer, size_t len) const {
+  return buf_append_printf(buffer, len, 0, "%u via PCA9505", this->pin_);
+}
+
+}  // namespace esphome::pca9505
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
J. Nick Koston	70fa11d846	Hint at flash storage without naming an option that may not apply; move a test comment	2026-10-13 15:53:50 -10:00
J. Nick Koston	f60c662a5b	Count a reservation against the store its own in_flash selects	2026-10-13 15:44:47 -10:00
J. Nick Koston	5893f4565d	Reserve through esphome.preferences, share the RTC layout with the crash handler, fold the redundant checks	2026-10-13 15:14:40 -10:00
J. Nick Koston	0987f14f70	Require a split of the RTC values across the two regions, test the scheduled path	2026-10-13 15:02:23 -10:00
J. Nick Koston	66dfaa6d2a	Reserve saved values per component and check the shared total after codegen	2026-10-13 14:14:41 -10:00
J. Nick Koston	44e962ab96	Let the fit helper pick the store from both flash facts, guard the crash handler words, add tests	2026-10-13 14:07:54 -10:00
J. Nick Koston	eb7a741c24	Terser comments	2026-10-13 14:04:48 -10:00
J. Nick Koston	4767efcc29	Hand the sizes to preferences.cpp as defines and add a fit helper	2026-10-13 13:55:20 -10:00
J. Nick Koston	34d251fe7e	[esp8266] Expose the saved-settings space to config-time checks	2026-10-13 13:42:45 -10:00
Panoplian	3cdcf0417a	[lvgl] Make the list_outside_block tests work offline (#20676 )	2026-10-13 13:31:08 -10:00
J. Nick Koston	c6e90de262	[ci] Catch out-of-class member log tags and keep midea's in flash (#20674 )	2026-10-14 12:21:24 +13:00
J. Nick Koston	92f6ab8367	[ci] Lint log tags in headers and core (#20668 )	2026-10-14 12:21:24 +13:00
J. Nick Koston	f61955baa2	[core] Declare the remaining log tags with ESPHOME_LOG_TAG (#20666 )	2026-10-14 12:21:23 +13:00
J. Nick Koston	36e1d831d3	[core] Add a decimal fast path to `parse_number<float>` (#20639 )	2026-10-14 12:18:35 +13:00
J. Nick Koston	63616bf642	[rtttl] Play a configured song from static storage without copying it (#19569 )	2026-10-14 12:06:27 +13:00
Keith Burzinski Claude Opus 5.5 J. Nick Koston	d275926f65	[mdns] Advertise the connected interface in the network TXT record (#20673 ) Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: J. Nick Koston <nick@koston.org>	2026-10-13 17:55:22 -05:00
Andrej Friesen	f265c46c21	[PCA9505] Add PCA9505/PCA9506 40-channel GPIO expander (#20667 )	2026-10-13 12:50:43 -10:00
Frédéric MetrichandClaude Opus 5.5	7d735f0677	[emontx] Lock the emonTx on reboot when its firmware supports it (#20621 ) Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-13 12:37:09 -10:00
Remco van Essen	5c23a827b6	[tmc2209] Add current and diagnostic sensors (#20638 )	2026-10-13 12:35:55 -10:00
Jonathan Swoboda	e265c0c0fc	[core] Sync the static analysis dependency pins with the code (#20681 )	2026-10-13 12:30:42 -10:00
J. Nick Koston	a0c7d754cb	[syslog] Keep the log level to severity table in flash (#20662 )	2026-10-13 12:22:35 -10:00
Jesse Hills	a6dbd72c53	Merge branch 'beta' into dev	2026-10-14 11:15:09 +13:00
Jesse Hills	9d530f5c56	Merge pull request #20680 from esphome/bump-2026.10.0b4 2026.10.0b4	2026-10-14 11:14:49 +13:00
Panoplian	6562c49686	[thermostat] Allow a dry-only thermostat without cool_action (#20682 )	2026-10-13 12:08:13 -10:00
guillempages	a97ce3a201	[image] Fix pillow deprecation warning (#20679 )	2026-10-13 11:58:21 -10:00
Jesse Hills	5a78f636b9	Bump version to 2026.10.0b4	2026-10-14 10:43:50 +13:00
tomaszduda23andClaude	53d504137b	[nrf52] Accept S140 7.2.0 and 7.3.0 in the sd140_v7 DFU package (#20661 ) Co-authored-by: Claude <noreply@anthropic.com>	2026-10-14 10:43:49 +13:00
Frédéric Metrich Claude Opus 5.5 J. Nick Koston	bb0546fc0b	[script] Keep the running script.wait item out of the queue while its chain runs (#20570 ) Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: J. Nick Koston <nick@koston.org>	2026-10-14 10:43:49 +13:00
emes30andJ. Nick Koston	b43630cf8e	[rp2_pio] Use pioasm 4.1.0 so PIO programs run on RP2350 (#19260 ) Co-authored-by: J. Nick Koston <nick@home-assistant.io>	2026-10-14 10:43:49 +13:00
Firat HajiyevandFirat17aze	c9664d4e42	[wifi] Reject unsupported WPA3 on ESP8266 (#20592 ) Co-authored-by: Firat17aze <187820330+Firat17aze@users.noreply.github.com>	2026-10-14 10:43:49 +13:00
Kevin Ahrendt	39ea6a3220	[audio] Bump microFLAC to v0.3.0 (#20591 )	2026-10-14 10:43:49 +13:00
J. Nick Koston	f4a6d6f18b	[core] Create the PlatformIO HTTP cache dir before the prefetch resolve threads run (#20579 )	2026-10-14 10:43:49 +13:00
esphome[bot]	6c24d4aa43	Bump aioesphomeapi from 46.9.0 to 46.10.0 (#20563 )	2026-10-14 10:43:49 +13:00
J. Nick Koston	0dc1d3b5a1	[toshiba] Move the lookup tables to PROGMEM (#20636 )	2026-10-13 11:25:18 -10:00
tomaszduda23andClaude	42341d05f9	[nrf52] Accept S140 7.2.0 and 7.3.0 in the sd140_v7 DFU package (#20661 ) Co-authored-by: Claude <noreply@anthropic.com>	2026-10-13 11:12:08 -10:00
J. Nick Koston	f941fee5ed	[homeassistant] Add sensor platform benchmarks (#20637 )	2026-10-13 11:10:14 -10:00
Bonne Eggleston	8721976066	[epaper_spi] Abandon an update when the busy pin never clears (#20555 )	2026-10-14 07:47:09 +11:00
Bonne Eggleston	05bf7d3440	[epaper_spi] Write pixel blocks straight into mono buffers (#20552 )	2026-10-14 07:40:56 +11:00
Frédéric Metrich Claude Opus 5.5 J. Nick Koston	918b7d2553	[script] Keep the running script.wait item out of the queue while its chain runs (#20570 ) Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: J. Nick Koston <nick@koston.org>	2026-10-13 09:31:19 -10:00
rwrozelleandClaude Opus 5.5	417ab4d2e9	[openthread] Add core_options for OpenThread compile-time options (#20595 ) Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-13 15:00:45 -04:00
Jonathan Swoboda	0821c84b7a	[core] Let a nested repeat shadow the outer iteration variable (#20634 )	2026-10-13 14:35:24 -04:00
Clyde Stubbs	a827058928	[lvgl] Change deprecated calls to current version (#20620 )	2026-10-13 14:27:50 -04:00
J. Nick Koston	3063b76210	[haier_tundra] Build the IR frame on the stack (#20635 )	2026-10-13 14:25:36 -04:00
Remco van EssenandClaude Opus 5.5	55261ae7e5	[tmc2209] Add driver diagnostics and stall detection (#20618 ) Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-13 08:17:25 -10:00
cociwebandJ. Nick Koston	1d8423edd8	[es8388] Add initial option configuration for DAC output and ADC input mic (#16342 ) Co-authored-by: J. Nick Koston <nick@home-assistant.io>	2026-10-13 08:14:43 -10:00
n-IA-haneandn-IA-hane	d27ec8ec49	[voice_assistant] Make TTS playback start timeout configurable (#18707 ) Co-authored-by: n-IA-hane <n-IA-hane@users.noreply.github.com>	2026-10-13 08:13:26 -10:00
Ivan KruglovandJ. Nick Koston	5acbd44067	[pcf8574] Add reset option to preserve outputs across MCU reboots (#20589 ) Co-authored-by: J. Nick Koston <nick@home-assistant.io>	2026-10-13 08:12:28 -10:00
Ryan pre-commit-ci-lite[bot]J. Nick Koston J. Nick Koston	40271fb597	[haier_tundra] New Climate IR component (#20469 ) Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com> Co-authored-by: J. Nick Koston <nick@koston.org> Co-authored-by: J. Nick Koston <nick@home-assistant.io>	2026-10-13 08:10:36 -10:00
Ludovic BOUÉ Ludovic BOUÉ Claude Sonnet 5 pre-commit-ci-lite[bot]J. Nick Koston	95766ed3ad	[icm20689] Add ICM-20689 6-axis accelerometer/gyroscope (SPI) (#19234 ) Co-authored-by: Ludovic BOUÉ <938089+lboue@users.noreply.github.com> Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com> Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com> Co-authored-by: J. Nick Koston <nick@home-assistant.io>	2026-10-13 08:07:32 -10:00
Tobias Stanzel J. Nick Koston J. Nick Koston	4a80d785a8	[filter_lifetime] Add component with sensor/lambda support for is_on … (#13914 ) Co-authored-by: J. Nick Koston <nick@home-assistant.io> Co-authored-by: J. Nick Koston <nick@koston.org>	2026-10-13 07:52:46 -10:00
J. Nick Koston	c1c1d2b2ae	[core] Add probe_ota_key, a Noise handshake with the device that sends no image (#20601 )	2026-10-13 07:28:32 -10:00
Mat931andJonathan Swoboda	29a668af04	[esp32_camera] Fix compile warning (#20628 ) Co-authored-by: Jonathan Swoboda <154711427+swoboda1337@users.noreply.github.com>	2026-10-13 14:01:17 +00:00
J. Nick Koston	fd541bca2c	[core] Document constexpr constants, per-model schemas and isolated build tests in AGENTS.md (#20617 )	2026-10-13 08:20:32 -04:00
J. Nick Koston	192ae31e45	[tests] Turn off the Hypothesis deadline for the MAC address tests (#20614 )	2026-10-13 08:19:10 -04:00
Frédéric MetrichandClaude Opus 5.5	77c9fa2fa4	[emontx] Read the emonTx firmware version (#20619 ) Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-12 22:43:02 -10:00
guillempagesandJ. Nick Koston	25843c5242	[image] Implement RGB111 format (#20114 ) Co-authored-by: J. Nick Koston <nick@home-assistant.io>	2026-10-12 22:16:44 -10:00
Brandon Harvey clydebarrow Claude Opus 5.5	7881dfc5d8	[deep_sleep] Reject wakeup_pin configs that fail after validation (#18616 ) Co-authored-by: clydebarrow <2366188+clydebarrow@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-13 15:29:42 +11:00
rwrozelle Claude Sonnet 4.6 J. Nick Koston J. Nick Koston	e289a94451	[friedrich] New Climate IR component (#9178 ) Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> Co-authored-by: J. Nick Koston <nick@koston.org> Co-authored-by: J. Nick Koston <nick@home-assistant.io>	2026-10-12 17:11:21 -10:00
Sourabh Jaiswal Claude Sonnet 5 pre-commit-ci-lite[bot]J. Nick Koston J. Nick Koston	5017165800	[selec_meter] Add EM4M (3-phase) support via model option (#17782 ) Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com> Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com> Co-authored-by: J. Nick Koston <nick@home-assistant.io> Co-authored-by: J. Nick Koston <nick@koston.org>	2026-10-13 02:58:25 +00:00
Mathieu pre-commit-ci-lite[bot]J. Nick Koston J. Nick Koston	8acf885241	[bq76972] Add BQ76972 BMS chip monitoring component (#17720 ) Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com> Co-authored-by: J. Nick Koston <nick@koston.org> Co-authored-by: J. Nick Koston <nick@home-assistant.io>	2026-10-12 16:43:51 -10:00
techdregs pre-commit-ci-lite[bot]J. Nick Koston	f829447b2e	[tmp102] Add number entities for runtime thermostat thresholds (#20596 ) Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com> Co-authored-by: J. Nick Koston <nick@home-assistant.io>	2026-10-12 16:25:49 -10:00
rwalker777 pre-commit-ci-lite[bot]J. Nick Koston J. Nick Koston	74e96b7da6	[INA3221] Add optional flags to expose all functionality (#16309 ) Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com> Co-authored-by: J. Nick Koston <nick@home-assistant.io> Co-authored-by: J. Nick Koston <nick@koston.org>	2026-10-12 16:21:00 -10:00
Ivan Novak Claude Sonnet 4.6 J. Nick Koston	753c10e5ea	[ld2410s] Add the distance sensor, firmware version and common parameters (Part 2) (#8486 ) Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> Co-authored-by: J. Nick Koston <nick@home-assistant.io>	2026-10-12 16:06:45 -10:00