[uart] Migrate check_uart_settings to final validation (#18940)

esphome/components/cm1106/cm1106.cpp

@@ -100,7 +100,6 @@ bool CM1106Component::cm1106_write_command_(const uint8_t *command, size_t comma
 void CM1106Component::dump_config() {
   ESP_LOGCONFIG(TAG, "CM1106:");
   LOG_SENSOR("  ", "CO2", this->co2_sensor_);
-  this->check_uart_settings(9600);
   if (this->is_failed()) {
     ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }

esphome/components/cm1106/sensor.py

@@ -46,6 +46,14 @@ CONFIG_SCHEMA = (
     .extend(uart.UART_DEVICE_SCHEMA)
 )
 
+FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
+    "cm1106",
+    baud_rate=9600,
+    data_bits=8,
+    parity="NONE",
+    stop_bits=1,
+)
+
 
 async def to_code(config: ConfigType) -> None:
     """Code generation entry point."""

esphome/components/cse7761/cse7761.cpp

@@ -58,7 +58,6 @@ void CSE7761Component::dump_config() {
     ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
-  this->check_uart_settings(38400, 1, uart::UART_CONFIG_PARITY_EVEN, 8);
 }
 
 void CSE7761Component::update() {

esphome/components/cse7761/sensor.py

@@ -68,7 +68,13 @@ CONFIG_SCHEMA = (
 )
 
 FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
-    "cse7761", baud_rate=38400, require_rx=True, require_tx=True
+    "cse7761",
+    baud_rate=38400,
+    require_rx=True,
+    require_tx=True,
+    data_bits=8,
+    parity="EVEN",
+    stop_bits=1,
 )
 
 

esphome/components/cse7766/cse7766.cpp

@@ -255,7 +255,6 @@ void CSE7766Component::dump_config() {
   LOG_SENSOR("  ", "Apparent Power", this->apparent_power_sensor_);
   LOG_SENSOR("  ", "Reactive Power", this->reactive_power_sensor_);
   LOG_SENSOR("  ", "Power Factor", this->power_factor_sensor_);
-  this->check_uart_settings(4800, 1, uart::UART_CONFIG_PARITY_EVEN);
 }
 
 }  // namespace esphome::cse7766

esphome/components/cse7766/sensor.py

@@ -84,7 +84,12 @@ CONFIG_SCHEMA = (
     .extend(cv.COMPONENT_SCHEMA)
 )
 FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
-    "cse7766", baud_rate=4800, parity="EVEN", require_rx=True
+    "cse7766",
+    baud_rate=4800,
+    require_rx=True,
+    data_bits=8,
+    parity="EVEN",
+    stop_bits=1,
 )
 
 

esphome/components/daly_bms/__init__.py

@@ -26,6 +26,14 @@ CONFIG_SCHEMA = (
     .extend(cv.polling_component_schema("30s"))
 )
 
+FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
+    "daly_bms",
+    baud_rate=9600,
+    data_bits=8,
+    parity="NONE",
+    stop_bits=1,
+)
+
 
 async def to_code(config: ConfigType) -> None:
     var = cg.new_Pvariable(config[CONF_ID])

esphome/components/daly_bms/daly_bms.cpp

@@ -22,10 +22,7 @@ static const uint8_t DALY_REQUEST_TEMPERATURE = 0x96;
 
 void DalyBmsComponent::setup() { this->next_request_ = 1; }
 
-void DalyBmsComponent::dump_config() {
-  ESP_LOGCONFIG(TAG, "Daly BMS:");
-  this->check_uart_settings(9600);
-}
+void DalyBmsComponent::dump_config() { ESP_LOGCONFIG(TAG, "Daly BMS:"); }
 
 void DalyBmsComponent::update() {
   this->trigger_next_ = true;

esphome/components/dfplayer/__init__.py

@@ -60,7 +60,12 @@ CONFIG_SCHEMA = cv.All(
     ).extend(uart.UART_DEVICE_SCHEMA)
 )
 FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
-    "dfplayer", baud_rate=9600, require_tx=True
+    "dfplayer",
+    baud_rate=9600,
+    require_tx=True,
+    data_bits=8,
+    parity="NONE",
+    stop_bits=1,
 )
 
 

esphome/components/dfplayer/dfplayer.cpp

@@ -277,9 +277,6 @@ void DFPlayer::loop() {
     }
   }
 }
-void DFPlayer::dump_config() {
-  ESP_LOGCONFIG(TAG, "DFPlayer:");
-  this->check_uart_settings(9600);
-}
+void DFPlayer::dump_config() { ESP_LOGCONFIG(TAG, "DFPlayer:"); }
 
 }  // namespace esphome::dfplayer

esphome/components/hc8/hc8.cpp

@@ -96,7 +96,6 @@ void HC8Component::dump_config() {
                 "  Warmup time: %" PRIu32 " s",
                 this->warmup_seconds_);
   LOG_SENSOR("  ", "CO2", this->co2_sensor_);
-  this->check_uart_settings(9600);
 }
 
 }  // namespace esphome::hc8

esphome/components/hc8/sensor.py

@@ -47,6 +47,9 @@ FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
     baud_rate=9600,
     require_rx=True,
     require_tx=True,
+    data_bits=8,
+    parity="NONE",
+    stop_bits=1,
 )
 
 

esphome/components/he60r/he60r.cpp

@@ -38,7 +38,6 @@ CoverTraits HE60rCover::get_traits() {
 
 void HE60rCover::dump_config() {
   LOG_COVER("", "HE60R Cover", this);
-  this->check_uart_settings(1200, 1, uart::UART_CONFIG_PARITY_EVEN, 8);
   ESP_LOGCONFIG(TAG,
                 "  Open Duration: %.1fs\n"
                 "  Close Duration: %.1fs",

esphome/components/hrxl_maxsonar_wr/hrxl_maxsonar_wr.cpp

@@ -68,8 +68,6 @@ void HrxlMaxsonarWrComponent::check_buffer_() {
 void HrxlMaxsonarWrComponent::dump_config() {
   ESP_LOGCONFIG(TAG, "HRXL MaxSonar WR Sensor:");
   LOG_SENSOR("  ", "Distance", this);
-  // As specified in the sensor's data sheet
-  this->check_uart_settings(9600, 1, esphome::uart::UART_CONFIG_PARITY_NONE, 8);
 }
 
 }  // namespace esphome::hrxl_maxsonar_wr

esphome/components/hrxl_maxsonar_wr/sensor.py

@@ -23,6 +23,14 @@ CONFIG_SCHEMA = sensor.sensor_schema(
     state_class=STATE_CLASS_MEASUREMENT,
 ).extend(uart.UART_DEVICE_SCHEMA)
 
+FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
+    "hrxl_maxsonar_wr",
+    baud_rate=9600,
+    data_bits=8,
+    parity="NONE",
+    stop_bits=1,
+)
+
 
 async def to_code(config: ConfigType) -> None:
     var = await sensor.new_sensor(config)

esphome/components/hydreon_rgxx/hydreon_rgxx.cpp

@@ -11,7 +11,6 @@ static const char *const PROTOCOL_NAMES[] = {HYDREON_RGXX_PROTOCOL_LIST(, HYDREO
 static const char *const IGNORE_STRINGS[] = {HYDREON_RGXX_IGNORE_LIST(, HYDREON_RGXX_COMMA)};
 
 void HydreonRGxxComponent::dump_config() {
-  this->check_uart_settings(9600, 1, esphome::uart::UART_CONFIG_PARITY_NONE, 8);
   ESP_LOGCONFIG(TAG, "hydreon_rgxx:");
   if (this->is_failed()) {
     ESP_LOGE(TAG, "Connection with hydreon_rgxx failed!");

esphome/components/hydreon_rgxx/sensor.py

@@ -130,6 +130,14 @@ CONFIG_SCHEMA = cv.All(
     _validate,
 )
 
+FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
+    "hydreon_rgxx",
+    baud_rate=9600,
+    data_bits=8,
+    parity="NONE",
+    stop_bits=1,
+)
+
 
 async def to_code(config: ConfigType) -> None:
     var = cg.new_Pvariable(config[CONF_ID])

esphome/components/kamstrup_kmp/kamstrup_kmp.cpp

@@ -26,8 +26,6 @@ void KamstrupKMPComponent::dump_config() {
     LOG_SENSOR("  ", "Custom Sensor", this->custom_sensors_[i]);
     ESP_LOGCONFIG(TAG, "    Command: 0x%04X", this->custom_commands_[i]);
   }
-
-  this->check_uart_settings(1200, 2, uart::UART_CONFIG_PARITY_NONE, 8);
 }
 
 void KamstrupKMPComponent::update() {

esphome/components/kamstrup_kmp/sensor.py

@@ -102,7 +102,13 @@ CONFIG_SCHEMA = (
 )
 
 FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
-    "kamstrup_kmp", baud_rate=1200, require_rx=True, require_tx=True
+    "kamstrup_kmp",
+    baud_rate=1200,
+    require_rx=True,
+    require_tx=True,
+    data_bits=8,
+    parity="NONE",
+    stop_bits=2,
 )
 
 

esphome/components/mhz19/mhz19.cpp

@@ -143,8 +143,6 @@ void MHZ19Component::dump_config() {
   ESP_LOGCONFIG(TAG, "MH-Z19:");
   LOG_SENSOR("  ", "CO2", this->co2_sensor_);
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
-  this->check_uart_settings(9600);
-
   if (this->abc_boot_logic_ == MHZ19_ABC_ENABLED) {
     ESP_LOGCONFIG(TAG, "  Automatic baseline calibration enabled on boot");
   } else if (this->abc_boot_logic_ == MHZ19_ABC_DISABLED) {

esphome/components/mhz19/sensor.py

@@ -80,6 +80,14 @@ CONFIG_SCHEMA = (
     .extend(uart.UART_DEVICE_SCHEMA)
 )
 
+FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
+    "mhz19",
+    baud_rate=9600,
+    data_bits=8,
+    parity="NONE",
+    stop_bits=1,
+)
+
 
 async def to_code(config: ConfigType) -> None:
     var = cg.new_Pvariable(config[CONF_ID])

esphome/components/mk2pvrouter/mk2pvrouter.cpp

@@ -163,10 +163,7 @@ void Mk2PVRouter::publish_value_(const char *tag, const char *val) {
 #endif
 }
 
-void Mk2PVRouter::dump_config() {
-  ESP_LOGCONFIG(TAG, "Mk2PVRouter:");
-  this->check_uart_settings(BAUD_RATE, 1, uart::UART_CONFIG_PARITY_EVEN, 7);
-}
+void Mk2PVRouter::dump_config() { ESP_LOGCONFIG(TAG, "Mk2PVRouter:"); }
 
 #ifdef MK2PVROUTER_LISTENER_COUNT
 void Mk2PVRouter::register_mk2pvrouter_listener(Mk2PVRouterListener *listener) {

esphome/components/mk2pvrouter/mk2pvrouter.h

@@ -43,7 +43,6 @@ class Mk2PVRouter final : public Component, public uart::UARTDevice {
 
  protected:
   static constexpr size_t CRC_SUFFIX_LEN = 1;
-  static constexpr uint32_t BAUD_RATE = 9600;
 
   enum class State : uint8_t {
     WAITING_FOR_START,

esphome/components/pm1006/pm1006.cpp

@@ -16,7 +16,6 @@ void PM1006Component::dump_config() {
   ESP_LOGCONFIG(TAG, "PM1006:");
   LOG_SENSOR("  ", "PM2.5", this->pm_2_5_sensor_);
   LOG_UPDATE_INTERVAL(this);
-  this->check_uart_settings(9600);
 }
 
 void PM1006Component::update() {

esphome/components/pm1006/sensor.py

@@ -48,6 +48,9 @@ def validate_interval_uart(config: ConfigType) -> None:
         baud_rate=9600,
         require_rx=True,
         require_tx=interval.total_milliseconds != SCHEDULER_DONT_RUN,
+        data_bits=8,
+        parity="NONE",
+        stop_bits=1,
     )(config)
 
 

esphome/components/pmsx003/pmsx003.cpp

@@ -46,8 +46,6 @@ void PMSX003Component::dump_config() {
   } else {
     ESP_LOGCONFIG(TAG, "  Mode: passive with sleep/wake cycles");
   }
-
-  this->check_uart_settings(9600);
 }
 
 void PMSX003Component::loop() {

esphome/components/pmsx003/sensor.py

@@ -302,7 +302,13 @@ CONFIG_SCHEMA = cv.All(
 def final_validate(config: ConfigType) -> None:
     require_tx = config[CONF_UPDATE_INTERVAL] > cv.time_period("0s")
     schema = uart.final_validate_device_schema(
-        "pmsx003", baud_rate=9600, require_rx=True, require_tx=require_tx
+        "pmsx003",
+        baud_rate=9600,
+        require_rx=True,
+        require_tx=require_tx,
+        data_bits=8,
+        parity="NONE",
+        stop_bits=1,
     )
     schema(config)
 

esphome/components/pylontech/__init__.py

@@ -41,6 +41,14 @@ CONFIG_SCHEMA = cv.All(
     .extend(uart.UART_DEVICE_SCHEMA)
 )
 
+FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
+    "pylontech",
+    baud_rate=115200,
+    data_bits=8,
+    parity="NONE",
+    stop_bits=1,
+)
+
 
 async def to_code(config: ConfigType) -> None:
     var = cg.new_Pvariable(config[CONF_ID])

esphome/components/pylontech/pylontech.cpp

@@ -33,7 +33,6 @@ static const uint8_t ASCII_LF = 0x0A;
 PylontechComponent::PylontechComponent() {}
 
 void PylontechComponent::dump_config() {
-  this->check_uart_settings(115200, 1, esphome::uart::UART_CONFIG_PARITY_NONE, 8);
   ESP_LOGCONFIG(TAG, "pylontech:");
   if (this->is_failed()) {
     ESP_LOGE(TAG, "Connection with pylontech failed!");

esphome/components/seeed_mr60fda2/__init__.py

@@ -31,6 +31,7 @@ FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
     require_tx=True,
     require_rx=True,
     baud_rate=115200,
+    data_bits=8,
     parity="NONE",
     stop_bits=1,
 )

esphome/components/seeed_mr60fda2/seeed_mr60fda2.cpp

@@ -33,8 +33,6 @@ void MR60FDA2Component::dump_config() {
 
 // Initialisation functions
 void MR60FDA2Component::setup() {
-  this->check_uart_settings(115200);
-
   this->current_frame_locate_ = LOCATE_FRAME_HEADER;
   this->current_frame_id_ = 0;
   this->current_frame_len_ = 0;

esphome/components/smt100/sensor.py

@@ -68,7 +68,13 @@ CONFIG_SCHEMA = (
 )
 
 FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
-    "smt100", baud_rate=9600, require_rx=True, require_tx=True
+    "smt100",
+    baud_rate=9600,
+    require_rx=True,
+    require_tx=True,
+    data_bits=8,
+    parity="NONE",
+    stop_bits=1,
 )
 
 

esphome/components/smt100/smt100.cpp

@@ -65,7 +65,6 @@ void SMT100Component::dump_config() {
   LOG_SENSOR(TAG, "Temperature", this->temperature_sensor_);
   LOG_SENSOR(TAG, "Moisture", this->moisture_sensor_);
   LOG_UPDATE_INTERVAL(this);
-  this->check_uart_settings(9600);
 }
 
 int SMT100Component::readline_(int readch, char *buffer, int len) {

esphome/components/t6615/sensor.py

@@ -33,7 +33,13 @@ CONFIG_SCHEMA = (
 )
 
 FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
-    "t6615", baud_rate=19200, require_rx=True, require_tx=True
+    "t6615",
+    baud_rate=19200,
+    require_rx=True,
+    require_tx=True,
+    data_bits=8,
+    parity="NONE",
+    stop_bits=1,
 )
 
 

esphome/components/t6615/t6615.cpp

@@ -88,7 +88,6 @@ void T6615Component::query_ppm_() {
 void T6615Component::dump_config() {
   ESP_LOGCONFIG(TAG, "T6615:");
   LOG_SENSOR("  ", "CO2", this->co2_sensor_);
-  this->check_uart_settings(19200);
 }
 
 }  // namespace esphome::t6615

esphome/components/teleinfo/__init__.py

@@ -35,6 +35,22 @@ CONFIG_SCHEMA = (
 )
 
 
+def _final_validate(config: ConfigType) -> ConfigType:
+    # Historical mode runs at 1200 baud, standard mode at 9600 baud.
+    baud_rate = 1200 if config[CONF_HISTORICAL_MODE] else 9600
+    uart.final_validate_device_schema(
+        "teleinfo",
+        baud_rate=baud_rate,
+        data_bits=7,
+        parity="EVEN",
+        stop_bits=1,
+    )(config)
+    return config
+
+
+FINAL_VALIDATE_SCHEMA = _final_validate
+
+
 async def to_code(config: ConfigType) -> None:
     var = cg.new_Pvariable(config[CONF_ID], config[CONF_HISTORICAL_MODE])
     await cg.register_component(var, config)

esphome/components/teleinfo/teleinfo.cpp

@@ -184,10 +184,7 @@ void TeleInfo::publish_value_(const std::string &tag, const std::string &val) {
     element->publish_val(val);
   }
 }
-void TeleInfo::dump_config() {
-  ESP_LOGCONFIG(TAG, "TeleInfo:");
-  this->check_uart_settings(baud_rate_, 1, uart::UART_CONFIG_PARITY_EVEN, 7);
-}
+void TeleInfo::dump_config() { ESP_LOGCONFIG(TAG, "TeleInfo:"); }
 TeleInfo::TeleInfo(bool historical_mode) {
   if (historical_mode) {
     /*
@@ -195,11 +192,9 @@ TeleInfo::TeleInfo(bool historical_mode) {
      */
     checksum_area_end_ = 2;
     separator_ = 0x20;
-    baud_rate_ = 1200;
   } else {
     checksum_area_end_ = 1;
     separator_ = 0x9;
-    baud_rate_ = 9600;
   }
 }
 void TeleInfo::register_teleinfo_listener(TeleInfoListener *listener) { teleinfo_listeners_.push_back(listener); }

esphome/components/teleinfo/teleinfo.h

@@ -31,7 +31,6 @@ class TeleInfo final : public PollingComponent, public uart::UARTDevice {
   std::vector<TeleInfoListener *> teleinfo_listeners_{};
 
  protected:
-  uint32_t baud_rate_;
   int checksum_area_end_;
   int separator_;
   char buf_[MAX_BUF_SIZE];

esphome/components/tormatic/tormatic_cover.cpp

@@ -36,8 +36,6 @@ cover::CoverTraits Tormatic::get_traits() {
 
 void Tormatic::dump_config() {
   LOG_COVER("", "Tormatic Cover", this);
-  this->check_uart_settings(9600, 1, uart::UART_CONFIG_PARITY_NONE, 8);
-
   ESP_LOGCONFIG(TAG,
                 "  Open Duration: %.1fs\n"
                 "  Close Duration: %.1fs",

esphome/components/uart/uart.h

@@ -3,6 +3,7 @@
 #include <vector>
 #include "esphome/core/component.h"
 #include "esphome/core/hal.h"
+#include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 #include "uart_component.h"
 
@@ -66,6 +67,7 @@ class UARTDevice {
   }
 
   /// Check that the configuration of the UART bus matches the provided values and otherwise print a warning
+  ESPDEPRECATED("Use uart.final_validate_device_schema() in Python instead. Removed in 2027.3.0", "2026.9.0")
   void check_uart_settings(uint32_t baud_rate, uint8_t stop_bits = 1,
                            UARTParityOptions parity = UART_CONFIG_PARITY_NONE, uint8_t data_bits = 8);
 

esphome/components/ufm01/__init__.py

@@ -30,6 +30,7 @@ FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
     require_tx=True,
     require_rx=True,
     baud_rate=2400,
+    data_bits=8,
     parity="EVEN",
     stop_bits=1,
 )

esphome/components/ufm01/ufm01.cpp

@@ -213,7 +213,6 @@ void UFM01Component::dump_config() {
   LOG_BINARY_SENSOR("  ", "Empty Tube", this->empty_tube_binary_sensor_);
   LOG_BINARY_SENSOR("  ", "Flow Rate Out Of Range", this->flow_rate_out_of_range_binary_sensor_);
 #endif
-  this->check_uart_settings(2400, 1, uart::UART_CONFIG_PARITY_EVEN, 8);
 }
 
 void UFM01Component::on_active_frame_(uint8_t data[FRAME_SIZE]) {

esphome/components/uponor_smatrix/__init__.py

@@ -50,7 +50,7 @@ FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
     require_tx=True,
     require_rx=True,
     data_bits=8,
-    parity=None,
+    parity="NONE",
     stop_bits=1,
 )
 

esphome/components/uponor_smatrix/uponor_smatrix.cpp

@@ -29,8 +29,6 @@ void UponorSmatrixComponent::dump_config() {
   }
 #endif
 
-  this->check_uart_settings(19200);
-
   if (!this->unknown_devices_.empty()) {
     ESP_LOGCONFIG(TAG, "  Detected unknown device addresses:");
     for (auto device_address : this->unknown_devices_) {

esphome/components/vbus/__init__.py

@@ -29,6 +29,14 @@ CONFIG_SCHEMA = uart.UART_DEVICE_SCHEMA.extend(
     }
 )
 
+FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
+    "vbus",
+    baud_rate=9600,
+    data_bits=8,
+    parity="NONE",
+    stop_bits=1,
+)
+
 
 async def to_code(config: ConfigType) -> None:
     var = cg.new_Pvariable(config[CONF_ID])

esphome/components/vbus/vbus.cpp

@@ -11,10 +11,7 @@ static const char *const TAG = "vbus";
 // Maximum bytes to log in verbose hex output (16 frames * 4 bytes = 64 bytes typical)
 static constexpr size_t VBUS_MAX_LOG_BYTES = 64;
 
-void VBus::dump_config() {
-  ESP_LOGCONFIG(TAG, "VBus:");
-  check_uart_settings(9600);
-}
+void VBus::dump_config() { ESP_LOGCONFIG(TAG, "VBus:"); }
 
 static void septet_spread(uint8_t *data, int start, int count, uint8_t septet) {
   for (int i = 0; i < count; i++, septet >>= 1) {

esphome/components/wl_134/text_sensor.py

@@ -21,6 +21,14 @@ CONFIG_SCHEMA = (
     .extend(uart.UART_DEVICE_SCHEMA)
 )
 
+FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
+    "wl_134",
+    baud_rate=9600,
+    data_bits=8,
+    parity="NONE",
+    stop_bits=1,
+)
+
 
 async def to_code(config: ConfigType) -> None:
     var = await text_sensor.new_text_sensor(config)

esphome/components/wl_134/wl_134.cpp

@@ -110,7 +110,5 @@ uint64_t Wl134Component::hex_lsb_ascii_to_uint64_(const uint8_t *text, uint8_t t
 void Wl134Component::dump_config() {
   ESP_LOGCONFIG(TAG, "WL-134 Sensor:");
   LOG_TEXT_SENSOR("", "Tag", this);
-  // As specified in the sensor's data sheet
-  this->check_uart_settings(9600, 1, esphome::uart::UART_CONFIG_PARITY_NONE, 8);
 }
 }  // namespace esphome::wl_134

tests/components/cse7761/test.esp32-idf.yaml

@@ -3,6 +3,6 @@ substitutions:
   rx_pin: GPIO14
 
 packages:
-  uart_38400: !include ../../test_build_components/common/uart_38400/esp32-idf.yaml
+  uart_38400_even: !include ../../test_build_components/common/uart_38400_even/esp32-idf.yaml
 
 <<: !include common.yaml

tests/components/cse7761/test.esp8266-ard.yaml

@@ -3,6 +3,6 @@ substitutions:
   rx_pin: GPIO3
 
 packages:
-  uart_38400: !include ../../test_build_components/common/uart_38400/esp8266-ard.yaml
+  uart_38400_even: !include ../../test_build_components/common/uart_38400_even/esp8266-ard.yaml
 
 <<: !include common.yaml

tests/components/cse7761/test.rp2040-ard.yaml

@@ -3,6 +3,6 @@ substitutions:
   rx_pin: GPIO5
 
 packages:
-  uart_38400: !include ../../test_build_components/common/uart_38400/rp2040-ard.yaml
+  uart_38400_even: !include ../../test_build_components/common/uart_38400_even/rp2040-ard.yaml
 
 <<: !include common.yaml

tests/components/kamstrup_kmp/test.esp32-idf.yaml

@@ -1,4 +1,4 @@
 packages:
-  uart_1200: !include ../../test_build_components/common/uart_1200/esp32-idf.yaml
+  uart_1200_none_2stopbits: !include ../../test_build_components/common/uart_1200_none_2stopbits/esp32-idf.yaml
 
 <<: !include common.yaml

tests/components/kamstrup_kmp/test.esp8266-ard.yaml

@@ -3,6 +3,6 @@ substitutions:
   uart_rx_pin: GPIO3
 
 packages:
-  uart_1200: !include ../../test_build_components/common/uart_1200/esp8266-ard.yaml
+  uart_1200_none_2stopbits: !include ../../test_build_components/common/uart_1200_none_2stopbits/esp8266-ard.yaml
 
 <<: !include common.yaml

tests/components/pylontech/test.esp32-idf.yaml

@@ -3,6 +3,6 @@ substitutions:
   rx_pin: GPIO5
 
 packages:
-  uart: !include ../../test_build_components/common/uart/esp32-idf.yaml
+  uart_115200: !include ../../test_build_components/common/uart_115200/esp32-idf.yaml
 
 <<: !include common.yaml

tests/components/pylontech/test.esp8266-ard.yaml

@@ -3,6 +3,6 @@ substitutions:
   rx_pin: GPIO2
 
 packages:
-  uart: !include ../../test_build_components/common/uart/esp8266-ard.yaml
+  uart_115200: !include ../../test_build_components/common/uart_115200/esp8266-ard.yaml
 
 <<: !include common.yaml

tests/components/pylontech/test.rp2040-ard.yaml

@@ -3,6 +3,6 @@ substitutions:
   rx_pin: GPIO5
 
 packages:
-  uart: !include ../../test_build_components/common/uart/rp2040-ard.yaml
+  uart_115200: !include ../../test_build_components/common/uart_115200/rp2040-ard.yaml
 
 <<: !include common.yaml

tests/components/teleinfo/test.esp32-idf.yaml

@@ -3,6 +3,6 @@ substitutions:
   rx_pin: GPIO5
 
 packages:
-  uart: !include ../../test_build_components/common/uart/esp32-idf.yaml
+  uart_1200_even_7bits: !include ../../test_build_components/common/uart_1200_even_7bits/esp32-idf.yaml
 
 <<: !include common.yaml

tests/components/teleinfo/test.esp8266-ard.yaml

@@ -3,6 +3,6 @@ substitutions:
   rx_pin: GPIO2
 
 packages:
-  uart: !include ../../test_build_components/common/uart/esp8266-ard.yaml
+  uart_1200_even_7bits: !include ../../test_build_components/common/uart_1200_even_7bits/esp8266-ard.yaml
 
 <<: !include common.yaml

tests/components/teleinfo/test.rp2040-ard.yaml

@@ -3,6 +3,6 @@ substitutions:
   rx_pin: GPIO5
 
 packages:
-  uart: !include ../../test_build_components/common/uart/rp2040-ard.yaml
+  uart_1200_even_7bits: !include ../../test_build_components/common/uart_1200_even_7bits/rp2040-ard.yaml
 
 <<: !include common.yaml

tests/components/teleinfo/validate-standard.esp32-idf.yaml

@@ -0,0 +1,14 @@
+packages:
+  uart_9600_even_7bits: !include ../../test_build_components/common/uart_9600_even_7bits/esp32-idf.yaml
+
+teleinfo:
+  id: test_teleinfo_standard
+  historical_mode: false
+  update_interval: 60s
+
+sensor:
+  - platform: teleinfo
+    name: sinsts
+    tag_name: SINSTS
+    teleinfo_id: test_teleinfo_standard
+    unit_of_measurement: VA

tests/test_build_components/common/uart_1200_even_7bits/esp32-ard.yaml

@@ -0,0 +1,14 @@
+# Common UART configuration for ESP32 Arduino tests - 1200 baud, EVEN parity, 7 data bits
+
+substitutions:
+  tx_pin: GPIO17
+  rx_pin: GPIO16
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 1200
+    parity: EVEN
+    data_bits: 7
+    stop_bits: 1

tests/test_build_components/common/uart_1200_even_7bits/esp32-c3-ard.yaml

@@ -0,0 +1,14 @@
+# Common UART configuration for ESP32-C3 Arduino tests - 1200 baud, EVEN parity, 7 data bits
+
+substitutions:
+  tx_pin: GPIO20
+  rx_pin: GPIO21
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 1200
+    parity: EVEN
+    data_bits: 7
+    stop_bits: 1

tests/test_build_components/common/uart_1200_even_7bits/esp32-c3-idf.yaml

@@ -0,0 +1,14 @@
+# Common UART configuration for ESP32-C3 IDF tests - 1200 baud, EVEN parity, 7 data bits
+
+substitutions:
+  tx_pin: GPIO20
+  rx_pin: GPIO21
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 1200
+    parity: EVEN
+    data_bits: 7
+    stop_bits: 1

tests/test_build_components/common/uart_1200_even_7bits/esp32-idf.yaml

@@ -0,0 +1,14 @@
+# Common UART configuration for ESP32 IDF tests - 1200 baud, EVEN parity, 7 data bits
+
+substitutions:
+  tx_pin: GPIO17
+  rx_pin: GPIO16
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 1200
+    parity: EVEN
+    data_bits: 7
+    stop_bits: 1

tests/test_build_components/common/uart_1200_even_7bits/esp8266-ard.yaml

@@ -0,0 +1,14 @@
+# Common UART configuration for ESP8266 Arduino tests - 1200 baud, EVEN parity, 7 data bits
+
+substitutions:
+  tx_pin: GPIO4
+  rx_pin: GPIO5
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 1200
+    parity: EVEN
+    data_bits: 7
+    stop_bits: 1

tests/test_build_components/common/uart_1200_even_7bits/rp2040-ard.yaml

@@ -0,0 +1,14 @@
+# Common UART configuration for RP2040 Arduino tests - 1200 baud, EVEN parity, 7 data bits
+
+substitutions:
+  tx_pin: GPIO0
+  rx_pin: GPIO1
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 1200
+    parity: EVEN
+    data_bits: 7
+    stop_bits: 1

tests/test_build_components/common/uart_38400_even/esp32-ard.yaml

@@ -0,0 +1,12 @@
+# Common UART configuration for ESP32 Arduino tests - 38400 baud, EVEN parity
+
+substitutions:
+  tx_pin: GPIO17
+  rx_pin: GPIO16
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 38400
+    parity: EVEN

tests/test_build_components/common/uart_38400_even/esp32-c3-ard.yaml

@@ -0,0 +1,12 @@
+# Common UART configuration for ESP32-C3 Arduino tests - 38400 baud, EVEN parity
+
+substitutions:
+  tx_pin: GPIO20
+  rx_pin: GPIO21
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 38400
+    parity: EVEN

tests/test_build_components/common/uart_38400_even/esp32-c3-idf.yaml

@@ -0,0 +1,12 @@
+# Common UART configuration for ESP32-C3 IDF tests - 38400 baud, EVEN parity
+
+substitutions:
+  tx_pin: GPIO20
+  rx_pin: GPIO21
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 38400
+    parity: EVEN

tests/test_build_components/common/uart_38400_even/esp32-idf.yaml

@@ -0,0 +1,12 @@
+# Common UART configuration for ESP32 IDF tests - 38400 baud, EVEN parity
+
+substitutions:
+  tx_pin: GPIO17
+  rx_pin: GPIO16
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 38400
+    parity: EVEN

tests/test_build_components/common/uart_38400_even/esp8266-ard.yaml

@@ -0,0 +1,12 @@
+# Common UART configuration for ESP8266 Arduino tests - 38400 baud, EVEN parity
+
+substitutions:
+  tx_pin: GPIO4
+  rx_pin: GPIO5
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 38400
+    parity: EVEN

tests/test_build_components/common/uart_38400_even/rp2040-ard.yaml

@@ -0,0 +1,12 @@
+# Common UART configuration for RP2040 Arduino tests - 38400 baud, EVEN parity
+
+substitutions:
+  tx_pin: GPIO0
+  rx_pin: GPIO1
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 38400
+    parity: EVEN