[components] Define simple setters in the header (sensor drivers) (#22468)

esphome/components/bang_bang/bang_bang_climate.cpp

@@ -194,10 +194,6 @@ void BangBangClimate::change_away_(bool away) {
   this->preset = away ? climate::CLIMATE_PRESET_AWAY : climate::CLIMATE_PRESET_HOME;
 }
 
-void BangBangClimate::set_normal_config(const BangBangClimateTargetTempConfig &normal_config) {
-  this->normal_config_ = normal_config;
-}
-
 void BangBangClimate::set_away_config(const BangBangClimateTargetTempConfig &away_config) {
   this->supports_away_ = true;
   this->away_config_ = away_config;

esphome/components/bang_bang/bang_bang_climate.h

@@ -27,7 +27,7 @@ class BangBangClimate final : public climate::Climate, public Component {
 
   void set_supports_cool(bool supports_cool) { this->supports_cool_ = supports_cool; }
   void set_supports_heat(bool supports_heat) { this->supports_heat_ = supports_heat; }
-  void set_normal_config(const BangBangClimateTargetTempConfig &normal_config);
+  void set_normal_config(const BangBangClimateTargetTempConfig &normal_config) { this->normal_config_ = normal_config; }
   void set_away_config(const BangBangClimateTargetTempConfig &away_config);
 
   Trigger<> *get_idle_trigger();

esphome/components/bme280_base/bme280_base.cpp

@@ -280,15 +280,6 @@ float BME280Component::read_humidity_(const uint8_t *data, int32_t t_fine) {
 
   return h / 1024.0f;
 }
-void BME280Component::set_temperature_oversampling(BME280Oversampling temperature_over_sampling) {
-  this->temperature_oversampling_ = temperature_over_sampling;
-}
-void BME280Component::set_pressure_oversampling(BME280Oversampling pressure_over_sampling) {
-  this->pressure_oversampling_ = pressure_over_sampling;
-}
-void BME280Component::set_humidity_oversampling(BME280Oversampling humidity_over_sampling) {
-  this->humidity_oversampling_ = humidity_over_sampling;
-}
 uint8_t BME280Component::read_u8_(uint8_t a_register) {
   uint8_t data = 0;
   this->read_byte(a_register, &data);

esphome/components/bme280_base/bme280_base.h

@@ -63,11 +63,17 @@ class BME280Component : public PollingComponent {
 
  public:
   /// Set the oversampling value for the temperature sensor. Default is 16x.
-  void set_temperature_oversampling(BME280Oversampling temperature_over_sampling);
+  void set_temperature_oversampling(BME280Oversampling temperature_over_sampling) {
+    this->temperature_oversampling_ = temperature_over_sampling;
+  }
   /// Set the oversampling value for the pressure sensor. Default is 16x.
-  void set_pressure_oversampling(BME280Oversampling pressure_over_sampling);
+  void set_pressure_oversampling(BME280Oversampling pressure_over_sampling) {
+    this->pressure_oversampling_ = pressure_over_sampling;
+  }
   /// Set the oversampling value for the humidity sensor. Default is 16x.
-  void set_humidity_oversampling(BME280Oversampling humidity_over_sampling);
+  void set_humidity_oversampling(BME280Oversampling humidity_over_sampling) {
+    this->humidity_oversampling_ = humidity_over_sampling;
+  }
   /// Set the IIR Filter used to increase accuracy, defaults to no IIR Filter.
   void set_iir_filter(BME280IIRFilter iir_filter) { this->iir_filter_ = iir_filter; }
 

esphome/components/bme680/bme680.cpp

@@ -423,15 +423,6 @@ uint32_t BME680Component::calc_meas_duration_() {
 
   return tph_dur;
 }
-void BME680Component::set_temperature_oversampling(BME680Oversampling temperature_oversampling) {
-  this->temperature_oversampling_ = temperature_oversampling;
-}
-void BME680Component::set_pressure_oversampling(BME680Oversampling pressure_oversampling) {
-  this->pressure_oversampling_ = pressure_oversampling;
-}
-void BME680Component::set_humidity_oversampling(BME680Oversampling humidity_oversampling) {
-  this->humidity_oversampling_ = humidity_oversampling;
-}
 void BME680Component::set_heater(uint16_t heater_temperature, uint16_t heater_duration) {
   this->heater_temperature_ = heater_temperature;
   this->heater_duration_ = heater_duration;

esphome/components/bme680/bme680.h

@@ -73,11 +73,17 @@ class BME680Component final : public PollingComponent, public i2c::I2CDevice {
 
  public:
   /// Set the temperature oversampling value. Defaults to 16X.
-  void set_temperature_oversampling(BME680Oversampling temperature_oversampling);
+  void set_temperature_oversampling(BME680Oversampling temperature_oversampling) {
+    this->temperature_oversampling_ = temperature_oversampling;
+  }
   /// Set the pressure oversampling value. Defaults to 16X.
-  void set_pressure_oversampling(BME680Oversampling pressure_oversampling);
+  void set_pressure_oversampling(BME680Oversampling pressure_oversampling) {
+    this->pressure_oversampling_ = pressure_oversampling;
+  }
   /// Set the humidity oversampling value. Defaults to 16X.
-  void set_humidity_oversampling(BME680Oversampling humidity_oversampling);
+  void set_humidity_oversampling(BME680Oversampling humidity_oversampling) {
+    this->humidity_oversampling_ = humidity_oversampling;
+  }
   /// Set the IIR Filter value. Defaults to no IIR Filter.
   void set_iir_filter(BME680IIRFilter iir_filter) { this->iir_filter_ = iir_filter; }
 

esphome/components/bmp280_base/bmp280_base.cpp

@@ -195,12 +195,6 @@ float BMP280Component::read_pressure_(int32_t t_fine) {
   p = ((p + var1 + var2) >> 8) + (p7 << 4);
   return (p / 256.0f) / 100.0f;
 }
-void BMP280Component::set_temperature_oversampling(BMP280Oversampling temperature_over_sampling) {
-  this->temperature_oversampling_ = temperature_over_sampling;
-}
-void BMP280Component::set_pressure_oversampling(BMP280Oversampling pressure_over_sampling) {
-  this->pressure_oversampling_ = pressure_over_sampling;
-}
 uint8_t BMP280Component::read_u8_(uint8_t a_register) {
   uint8_t data = 0;
   this->bmp_read_byte(a_register, &data);

esphome/components/bmp280_base/bmp280_base.h

@@ -55,9 +55,13 @@ class BMP280Component : public PollingComponent {
 
  public:
   /// Set the oversampling value for the temperature sensor. Default is 16x.
-  void set_temperature_oversampling(BMP280Oversampling temperature_over_sampling);
+  void set_temperature_oversampling(BMP280Oversampling temperature_over_sampling) {
+    this->temperature_oversampling_ = temperature_over_sampling;
+  }
   /// Set the oversampling value for the pressure sensor. Default is 16x.
-  void set_pressure_oversampling(BMP280Oversampling pressure_over_sampling);
+  void set_pressure_oversampling(BMP280Oversampling pressure_over_sampling) {
+    this->pressure_oversampling_ = pressure_over_sampling;
+  }
   /// Set the IIR Filter used to increase accuracy, defaults to no IIR Filter.
   void set_iir_filter(BMP280IIRFilter iir_filter) { this->iir_filter_ = iir_filter; }
 

esphome/components/haier/smartair2_climate.cpp

@@ -550,8 +550,4 @@ haier_protocol::HandlerError Smartair2Climate::process_status_message_(const uin
   return haier_protocol::HandlerError::HANDLER_OK;
 }
 
-void Smartair2Climate::set_alternative_swing_control(bool swing_control) {
-  this->use_alternative_swing_control_ = swing_control;
-}
-
 }  // namespace esphome::haier

esphome/components/haier/smartair2_climate.h

@@ -12,7 +12,7 @@ class Smartair2Climate final : public HaierClimateBase {
   Smartair2Climate &operator=(const Smartair2Climate &) = delete;
   ~Smartair2Climate();
   void dump_config() override;
-  void set_alternative_swing_control(bool swing_control);
+  void set_alternative_swing_control(bool swing_control) { this->use_alternative_swing_control_ = swing_control; }
 
  protected:
   void set_handlers() override;

esphome/components/honeywellabp/honeywellabp.cpp

@@ -87,12 +87,4 @@ void HONEYWELLABPSensor::dump_config() {
   LOG_UPDATE_INTERVAL(this);
 }
 
-void HONEYWELLABPSensor::set_honeywellabp_min_pressure(float min_pressure) {
-  this->honeywellabp_min_pressure_ = min_pressure;
-}
-
-void HONEYWELLABPSensor::set_honeywellabp_max_pressure(float max_pressure) {
-  this->honeywellabp_max_pressure_ = max_pressure;
-}
-
 }  // namespace esphome::honeywellabp

esphome/components/honeywellabp/honeywellabp.h

@@ -19,8 +19,8 @@ class HONEYWELLABPSensor final : public PollingComponent,
   void update() override;
   float get_setup_priority() const override;
   void dump_config() override;
-  void set_honeywellabp_min_pressure(float min_pressure);
-  void set_honeywellabp_max_pressure(float max_pressure);
+  void set_honeywellabp_min_pressure(float min_pressure) { this->honeywellabp_min_pressure_ = min_pressure; }
+  void set_honeywellabp_max_pressure(float max_pressure) { this->honeywellabp_max_pressure_ = max_pressure; }
 
  protected:
   float honeywellabp_min_pressure_ = 0.0;

esphome/components/max6956/max6956.cpp

@@ -95,8 +95,6 @@ void MAX6956::set_brightness_global(uint8_t current) {
 
 void MAX6956::write_brightness_global() { this->write_reg_(MAX6956_GLOBAL_CURRENT, global_brightness_); }
 
-void MAX6956::set_brightness_mode(max6956::MAX6956CURRENTMODE brightness_mode) { brightness_mode_ = brightness_mode; };
-
 void MAX6956::write_brightness_mode() {
   uint8_t reg_addr = MAX6956_CONFIGURATION;
   uint8_t config = 0;

esphome/components/max6956/max6956.h

@@ -50,7 +50,7 @@ class MAX6956 final : public Component, public i2c::I2CDevice {
   float get_setup_priority() const override { return setup_priority::HARDWARE; }
 
   void set_brightness_global(uint8_t current);
-  void set_brightness_mode(max6956::MAX6956CURRENTMODE brightness_mode);
+  void set_brightness_mode(max6956::MAX6956CURRENTMODE brightness_mode) { this->brightness_mode_ = brightness_mode; }
   void set_pin_brightness(uint8_t pin, float brightness);
 
   void dump_config() override;

esphome/components/sds011/sds011.cpp

@@ -171,8 +171,4 @@ void SDS011Component::parse_data_() {
   PUBLISH_STATE(this->pm_10_0_sensor_, pm_10_0_concentration);
 }
 
-void SDS011Component::set_update_interval_min(uint8_t update_interval_min) {
-  this->update_interval_min_ = update_interval_min;
-}
-
 }  // namespace esphome::sds011

esphome/components/sds011/sds011.h

@@ -21,7 +21,7 @@ class SDS011Component final : public Component, public uart::UARTDevice {
   void dump_config() override;
   void loop() override;
 
-  void set_update_interval_min(uint8_t update_interval_min);
+  void set_update_interval_min(uint8_t update_interval_min) { this->update_interval_min_ = update_interval_min; }
   void set_working_state(bool working_state);
 
  protected:

esphome/components/sprinkler/sprinkler.cpp

@@ -284,8 +284,6 @@ SprinklerValveRunRequest::SprinklerValveRunRequest(size_t valve_number, uint32_t
 
 bool SprinklerValveRunRequest::has_valve_operator() { return !(this->valve_op_ == nullptr); }
 
-void SprinklerValveRunRequest::set_run_duration(uint32_t run_duration) { this->run_duration_ = run_duration; }
-
 void SprinklerValveRunRequest::set_valve(size_t valve_number) {
   this->valve_number_ = valve_number;
   this->run_duration_ = 0;

esphome/components/sprinkler/sprinkler.h

@@ -155,7 +155,7 @@ class SprinklerValveRunRequest {
   bool has_request() { return this->has_valve_; }
   bool has_valve_operator();
   void set_request_from(SprinklerValveRunRequestOrigin origin) { this->origin_ = origin; }
-  void set_run_duration(uint32_t run_duration);
+  void set_run_duration(uint32_t run_duration) { this->run_duration_ = run_duration; }
   void set_valve(size_t valve_number);
   void set_valve_operator(SprinklerValveOperator *valve_op);
   void reset();

esphome/components/tsl2561/tsl2561.cpp

@@ -133,9 +133,6 @@ float TSL2561Sensor::get_integration_time_ms_() {
   }
   return 0.0f;
 }
-void TSL2561Sensor::set_integration_time(TSL2561IntegrationTime integration_time) {
-  this->integration_time_ = integration_time;
-}
 
 bool TSL2561Sensor::tsl2561_write_byte(uint8_t a_register, uint8_t value) {
   return this->write_byte(a_register | TSL2561_COMMAND_BIT, value);

esphome/components/tsl2561/tsl2561.h

@@ -40,7 +40,7 @@ class TSL2561Sensor final : public sensor::Sensor, public PollingComponent, publ
    *
    * @param integration_time The new integration time.
    */
-  void set_integration_time(TSL2561IntegrationTime integration_time);
+  void set_integration_time(TSL2561IntegrationTime integration_time) { this->integration_time_ = integration_time; }
 
   /** Set the internal gain of the sensor. Can be useful for low-light conditions
    *

esphome/components/tsl2591/tsl2591.cpp

@@ -175,10 +175,6 @@ void TSL2591Component::update() {
   }
 }
 
-void TSL2591Component::set_integration_time(TSL2591IntegrationTime integration_time) {
-  this->integration_time_ = integration_time;
-}
-
 void TSL2591Component::set_device_and_glass_attenuation_factors(float device_factor, float glass_attenuation_factor) {
   this->device_factor_ = device_factor;
   this->glass_attenuation_factor_ = glass_attenuation_factor;

esphome/components/tsl2591/tsl2591.h

@@ -239,7 +239,7 @@ class TSL2591Component final : public PollingComponent, public i2c::I2CDevice {
   /** Used by ESPHome framework. */
   SUB_SENSOR(calculated_lux)
   /** Used by ESPHome framework. Does NOT actually set the value on the device. */
-  void set_integration_time(TSL2591IntegrationTime integration_time);
+  void set_integration_time(TSL2591IntegrationTime integration_time) { this->integration_time_ = integration_time; }
   /** Used by ESPHome framework. Does NOT actually set the value on the device. */
   void set_gain(TSL2591ComponentGain gain) { this->component_gain_ = gain; }
   /** Used by ESPHome framework. */