artem
c3cb5cb54a
This can be used to power cycle critical infrastructure, which may render the switch unavailable if turned off.
143 lines
2.8 KiB
YAML
143 lines
2.8 KiB
YAML
substitutions:
|
|
# Change this via CLI with:
|
|
# $ esphome -s name tools -s friendly_name Tools run mystrom.yaml
|
|
name: "spare-power-meter"
|
|
friendly_name: "Spare power meter"
|
|
|
|
esphome:
|
|
name: "${name}"
|
|
friendly_name: "${friendly_name}"
|
|
|
|
project:
|
|
name: "dasfoo.${name}"
|
|
version: "1.0"
|
|
|
|
esp32:
|
|
board: esp32doit-devkit-v1
|
|
framework:
|
|
type: esp-idf
|
|
|
|
packages:
|
|
mqtt: !include mqtt.yaml
|
|
ota: !include ota.yaml
|
|
wifi: !include wifi.yaml
|
|
uptime: !include uptime.yaml
|
|
restart: !include restart.yaml
|
|
syslog: !include syslog.yaml
|
|
|
|
logger:
|
|
|
|
wifi:
|
|
# BSS Transition Management support which we have enabled in APs.
|
|
enable_btm: true
|
|
|
|
i2c:
|
|
sda: 22
|
|
scl: 19
|
|
scan: false
|
|
|
|
status_led:
|
|
# Red LED on the front panel.
|
|
pin: GPIO16
|
|
|
|
binary_sensor:
|
|
- platform: gpio
|
|
id: mystrom_side
|
|
name: "Side button (plus) pressed"
|
|
pin:
|
|
number: GPIO23
|
|
mode:
|
|
input: true
|
|
pullup: true
|
|
inverted: true
|
|
- platform: gpio
|
|
id: mystrom_bottom
|
|
name: "Bottom button (power) pressed"
|
|
pin:
|
|
number: GPIO18
|
|
mode:
|
|
input: true
|
|
pullup: true
|
|
inverted: true
|
|
on_press:
|
|
then:
|
|
- switch.toggle: mystrom_relay
|
|
|
|
script:
|
|
- id: power_cycle_relay
|
|
mode: single
|
|
then:
|
|
- if:
|
|
condition:
|
|
switch.is_on: mystrom_relay
|
|
then:
|
|
- switch.turn_off: mystrom_relay
|
|
- delay: 7s
|
|
- switch.turn_on: mystrom_relay
|
|
|
|
button:
|
|
- platform: template
|
|
name: "Power cycle relay"
|
|
icon: "mdi:restart"
|
|
on_press:
|
|
- script.execute: power_cycle_relay
|
|
|
|
sensor:
|
|
- platform: pulse_counter
|
|
pin: 4
|
|
update_interval: 10s
|
|
id: mystrom_power_consumption
|
|
name: "Power relay consumption"
|
|
device_class: "power"
|
|
state_class: "measurement"
|
|
unit_of_measurement: "W"
|
|
accuracy_decimals: 0
|
|
filters:
|
|
- multiply: 3.29E-02 # pulse/min -> W
|
|
|
|
total:
|
|
name: "Energy consumption"
|
|
unit_of_measurement: "kWh"
|
|
device_class: "energy"
|
|
state_class: "total_increasing"
|
|
accuracy_decimals: 3
|
|
filters:
|
|
- multiply: 5.48E-07 # pulses -> kWh
|
|
|
|
- platform: tmp102
|
|
id: mystrom_temperature
|
|
name: "Internal temperature"
|
|
update_interval: 60s
|
|
entity_category: diagnostic
|
|
address: 0x48
|
|
on_value_range:
|
|
above: 80
|
|
then:
|
|
- switch.turn_off: mystrom_relay
|
|
|
|
- platform: duty_time
|
|
id: continuous_on_time
|
|
name: Continuous on time
|
|
lambda: "return id(mystrom_relay).state;"
|
|
accuracy_decimals: 0
|
|
|
|
switch:
|
|
- platform: gpio
|
|
name: None # Main entity for the device.
|
|
pin: GPIO27
|
|
id: mystrom_relay
|
|
restore_mode: RESTORE_DEFAULT_ON
|
|
device_class: outlet
|
|
on_turn_off:
|
|
- sensor.duty_time.reset: continuous_on_time
|
|
|
|
- platform: gpio
|
|
# Exposing this as a switch rather than light to avoid
|
|
# automations and dashboard picking it up as illuminance
|
|
# source.
|
|
name: "Identify LED (white)"
|
|
restore_mode: ALWAYS_OFF
|
|
pin:
|
|
number: GPIO17
|
|
inverted: true
|