substitutions:
  # Change this via CLI with:
  # $ esphome -s name tools -s friendly_name Tools run mystrom.yaml
  name: "spare-power-meter"
  friendly_name: "Spare power meter"

esphome:
  name: "${name}"
  friendly_name: "${friendly_name}"

  project:
    name: "dasfoo.${name}"
    version: "1.0"

esp32:
  board: esp32doit-devkit-v1
  framework:
    type: esp-idf

packages:
  mqtt: !include mqtt.yaml
  ota: !include ota.yaml
  wifi: !include wifi.yaml
  uptime: !include uptime.yaml
  restart: !include restart.yaml
  syslog: !include syslog.yaml

logger:

wifi:
  # BSS Transition Management support which we have enabled in APs.
  enable_btm: true

i2c:
  sda: 22
  scl: 19
  scan: false

status_led:
  # Red LED on the front panel.
  pin: GPIO16

binary_sensor:
- platform: gpio
  id: mystrom_side
  name: "Side button (plus) pressed"
  pin:
    number: GPIO23
    mode:
      input: true
      pullup: true
    inverted: true
- platform: gpio
  id: mystrom_bottom
  name: "Bottom button (power) pressed"
  pin:
    number: GPIO18
    mode:
      input: true
      pullup: true
    inverted: true
  on_press:
    then:
    - switch.toggle: mystrom_relay

script:
- id: power_cycle_relay
  mode: single
  then:
    - if:
        condition:
          switch.is_on: mystrom_relay
        then:
        - switch.turn_off: mystrom_relay
        - delay: 7s
    - switch.turn_on: mystrom_relay

button:
  - platform: template
    name: "Power cycle relay"
    icon: "mdi:restart"
    on_press:
      - script.execute: power_cycle_relay

sensor:
- platform: pulse_counter
  pin: 4
  update_interval: 10s
  id: mystrom_power_consumption
  name: "Power relay consumption"
  device_class: "power"
  state_class: "measurement"
  unit_of_measurement: "W"
  accuracy_decimals: 0
  filters:
  - multiply: 3.29E-02  # pulse/min -> W

  total:
    name: "Energy consumption"
    unit_of_measurement: "kWh"
    device_class: "energy"
    state_class: "total_increasing"
    accuracy_decimals: 3
    filters:
    - multiply: 5.48E-07  # pulses -> kWh

- platform: tmp102
  id: mystrom_temperature
  name: "Internal temperature"
  update_interval: 60s
  entity_category: diagnostic
  address: 0x48
  on_value_range:
    above: 80
    then:
    - switch.turn_off: mystrom_relay

- platform: duty_time
  id: continuous_on_time
  name: Continuous on time
  lambda: "return id(mystrom_relay).state;"
  accuracy_decimals: 0

switch:
- platform: gpio
  name: None  # Main entity for the device.
  pin: GPIO27
  id: mystrom_relay
  restore_mode: RESTORE_DEFAULT_ON
  device_class: outlet
  on_turn_off:
  - sensor.duty_time.reset: continuous_on_time

- platform: gpio
  # Exposing this as a switch rather than light to avoid
  # automations and dashboard picking it up as illuminance
  # source.
  name: "Identify LED (white)"
  restore_mode: ALWAYS_OFF
  pin:
    number: GPIO17
    inverted: true