substitutions:
  # Change this via CLI with:
  # $ esphome -s name tools run mystrom.yaml
  name: "spare-power-meter"

esphome:
  name: "${name}"

  project:
    name: "dasfoo.${name}"
    version: "1.0"

esp32:
  board: esp32doit-devkit-v1
  framework:
    type: esp-idf

packages:
  mqtt: !include mqtt.yaml
  ota: !include ota.yaml
  wifi: !include wifi.yaml
  uptime: !include uptime.yaml
  restart: !include restart.yaml

logger:

i2c:
  sda: 22
  scl: 19
  scan: false

status_led:
  # Red LED on the front panel.
  pin: GPIO16

light:
- platform: binary
  name: "Identify LED (white)"
  id: mystrom_led_identify
  restore_mode: ALWAYS_OFF
  output: mystrom_led_white

output:
- id: mystrom_led_white
  platform: gpio
  pin: GPIO17
  inverted: true

binary_sensor:
- platform: gpio
  id: mystrom_side
  name: "Side button (plus) pressed"
  pin:
    number: GPIO23
    mode:
      input: true
      pullup: true
    inverted: true
- platform: gpio
  id: mystrom_bottom
  name: "Bottom button (power) pressed"
  pin:
    number: GPIO18
    mode:
      input: true
      pullup: true
    inverted: true
  on_press:
    then:
    - switch.toggle: mystrom_relay

sensor:
- platform: pulse_counter
  pin: 4
  update_interval: 10s
  id: mystrom_power_consumption
  name: "Power relay consumption"
  device_class: "power"
  state_class: "measurement"
  unit_of_measurement: "W"
  accuracy_decimals: 0
  filters:
  # Map from sensor -> measured value (pulse/min -> W),
  # taken from https://github.com/mightea/esphome-mystrom-devices
  - calibrate_linear:
    - 0.0 -> 1.55
    - 2698.5 -> 85
    - 4397.25 -> 146
    - 30900 -> 1005
    - 44634.56 -> 1439
    - 59643.75 -> 1930
  # Correct 1.55W for the power usage of the plug.
  - offset: -1.55
  # Make everything below 1W appear as just 0W.
  - lambda: if (x < 1) return 0; return x;

- platform: integration
  sensor: mystrom_power_consumption
  name: "Power consumption total"
  time_unit: "h"
  unit_of_measurement: "kWh"
  device_class: "energy"
  state_class: "total_increasing"
  accuracy_decimals: 2
  filters:
  - multiply: 0.001

- platform: tmp102
  id: mystrom_temperature
  name: "Internal temperature"
  update_interval: 60s
  entity_category: diagnostic
  address: 0x48
  on_value_range:
    above: 80
    then:
    - switch.turn_off: mystrom_relay

switch:
- platform: gpio
  name: None  # Main entity for the device.
  pin: GPIO27
  id: mystrom_relay
  restore_mode: RESTORE_DEFAULT_ON
  device_class: outlet