diff --git a/esphome/components/mipi_dsi/models/guition.py b/esphome/components/mipi_dsi/models/guition.py
index 914361a4ac5..3ebaf53f5b7 100644
--- a/esphome/components/mipi_dsi/models/guition.py
+++ b/esphome/components/mipi_dsi/models/guition.py
@@ -1,3 +1,5 @@
+from esphome.components.mipi import SLPOUT, delay
+
 from . import DsiDriverChip
 
 # fmt: off
@@ -34,6 +36,61 @@ DsiDriverChip(
     ],
 )
 
+# JC1060P470-V2: 2026 batch of the JC1060P470 with a different 7" panel behind the same JD9165 driver.
+# The rear label shows "V2" after the material number. Timings and init sequence taken from Guition's
+# reference driver JC1060P470C_I_W_Y.zip (2026-07-13),
+# 1-Demo/.../JC1060P470C_I_W_Y_New_Panel/lvgl_demo_v8/src/lcd/esp_lcd_jd9165.{c,h}
+# ----------------------------------------------------------------------------------------------------------------------
+# * Resolution: 1024x600
+# * PCLK Frequency: 52 MHz
+# * DSI Lane Bit Rate: 750 Mbps (using 2-Lane DSI configuration)
+# * Horizontal Timing (hsync_pulse_width=24, hsync_back_porch=136, hsync_front_porch=160)
+# * Vertical Timing (vsync_pulse_width=2, vsync_back_porch=21, vsync_front_porch=12)
+# ----------------------------------------------------------------------------------------------------------------------
+DsiDriverChip(
+    "JC1060P470-V2",
+    width=1024,
+    height=600,
+    hsync_back_porch=136,
+    hsync_pulse_width=24,
+    hsync_front_porch=160,
+    vsync_back_porch=21,
+    vsync_pulse_width=2,
+    vsync_front_porch=12,
+    pclk_frequency="52MHz",
+    lane_bit_rate="750Mbps",
+    color_order="RGB",
+    # LCD_RST is GPIO0 on the JC1060P470C_I_W_Y schematic (FPC1 pin 4); the JD9165 needs 120 ms after reset
+    # before it accepts the vendor table and 120 ms after SLPOUT before DISPON (Guition esp_lcd_jd9165.c);
+    # the framework adds another 10 ms after SLPOUT.
+    # SLPOUT is in the init sequence with its own delay, so the framework must not append a second one.
+    reset_pin=0,
+    no_slpout=True,
+    initsequence=[
+        delay(120),
+        (0x30, 0x00), (0xF7, 0x49, 0x61, 0x02, 0x00), (0x30, 0x01), (0x04, 0x0C), (0x05, 0x08), (0x0B, 0x11),
+        (0x20, 0x04), (0x1F, 0x05), (0x23, 0x38), (0x28, 0x18), (0x29, 0x29), (0x2A, 0x01), (0x2B, 0x29),
+        (0x2C, 0x01), (0x30, 0x02), (0x00, 0x05), (0x01, 0x22), (0x02, 0x08), (0x03, 0x12), (0x04, 0x16),
+        (0x05, 0x64), (0x06, 0x00), (0x07, 0x00), (0x08, 0x78), (0x09, 0x00), (0x0A, 0x04),
+        (0x0B, 0x16, 0x17, 0x0B, 0x0D, 0x0D, 0x0D, 0x11, 0x10, 0x07, 0x07, 0x09),
+        (0x0C, 0x09, 0x1E, 0x1E, 0x1C, 0x1C, 0x0D, 0x0D, 0x0D, 0x0D, 0x0D, 0x0D),
+        (0x0D, 0x0A, 0x05, 0x0B, 0x0D, 0x0D, 0x0D, 0x11, 0x10, 0x06, 0x06, 0x08),
+        (0x0E, 0x08, 0x1F, 0x1F, 0x1D, 0x1D, 0x0D, 0x0D, 0x0D, 0x0D, 0x0D, 0x0D),
+        (0x0F, 0x0A, 0x05, 0x0D, 0x0B, 0x0D, 0x0D, 0x11, 0x10, 0x1D, 0x1D, 0x1F),
+        (0x10, 0x1F, 0x08, 0x08, 0x06, 0x06, 0x0D, 0x0D, 0x0D, 0x0D, 0x0D, 0x0D),
+        (0x11, 0x16, 0x17, 0x0D, 0x0B, 0x0D, 0x0D, 0x11, 0x10, 0x1C, 0x1C, 0x1E),
+        (0x12, 0x1E, 0x09, 0x09, 0x07, 0x07, 0x0D, 0x0D, 0x0D, 0x0D, 0x0D, 0x0D),
+        (0x13, 0x00, 0x00, 0x00, 0x00), (0x14, 0x00, 0x00, 0x41, 0x41), (0x15, 0x00, 0x00, 0x00, 0x00),
+        (0x17, 0x00), (0x18, 0x85), (0x19, 0x06, 0x09), (0x1A, 0x05, 0x08), (0x1B, 0x0A, 0x04), (0x26, 0x00),
+        (0x27, 0x00), (0x30, 0x06),
+        (0x12, 0x3F, 0x25, 0x27, 0x35, 0x1D, 0x1B, 0x1B, 0x1A, 0x18, 0x0A, 0x2A, 0x21, 0x19, 0x30),
+        (0x13, 0x3F, 0x26, 0x27, 0x35, 0x1E, 0x1C, 0x1C, 0x1A, 0x18, 0x0B, 0x2A, 0x21, 0x19, 0x30),
+        (0x30, 0x0A), (0x02, 0x4F), (0x0B, 0x40), (0x30, 0x0D), (0x0D, 0x04), (0x10, 0x05), (0x11, 0x0C),
+        (0x12, 0x05), (0x13, 0x0C), (0x30, 0x00),
+        (SLPOUT,), delay(120),
+    ],
+)
+
 
 # JC4880P443 Driver Configuration (ST7701)
 # Using parameters from esp_lcd_st7701.h and the working full init sequence
diff --git a/tests/components/mipi_dsi/validate-v2.esp32-p4-idf.yaml b/tests/components/mipi_dsi/validate-v2.esp32-p4-idf.yaml
new file mode 100644
index 00000000000..bbb4a7269a8
--- /dev/null
+++ b/tests/components/mipi_dsi/validate-v2.esp32-p4-idf.yaml
@@ -0,0 +1,18 @@
+packages:
+  i2c: !include ../../test_build_components/common/i2c/esp32-p4-idf.yaml
+
+esp_ldo:
+  - id: ldo_id
+    channel: 3
+    voltage: 2.5V
+
+display:
+  - platform: mipi_dsi
+    model: JC1060P470-V2
+    enable_pin: GPIO22
+
+#light:
+  #- platform: mipi_dsi
+    #id: backlight_id
+
+psram: