Merge remote-tracking branch 'upstream/dev' into integration

tests/integration/fixtures/uart_mock_modbus.yaml

@@ -49,15 +49,16 @@ modbus_controller:
   - address: 1
     id: modbus_controller_ok
     max_cmd_retries: 2
-    update_interval: 1s
+    # Update interval is set to never to prevent automatic polling: the test will trigger requests by pressing the "Start Scenario" button
+    update_interval: never
   - address: 2
     id: modbus_controller_slow
     max_cmd_retries: 0
-    update_interval: 1s
+    update_interval: never
   - address: 3
     id: modbus_controller_offline
     max_cmd_retries: 0
-    update_interval: 1s
+    update_interval: never
 
 sensor:
   - platform: modbus_controller
@@ -91,4 +92,11 @@ button:
     name: "Start Scenario"
     id: start_scenario_btn
     on_press:
-      - lambda: "id(virtual_uart_dev).start_scenario();"
+      - lambda: |-
+          id(virtual_uart_dev).start_scenario();
+          id(modbus_controller_ok).set_update_interval(1000);
+          id(modbus_controller_ok).start_poller();
+          id(modbus_controller_slow).set_update_interval(1000);
+          id(modbus_controller_slow).start_poller();
+          id(modbus_controller_offline).set_update_interval(1000);
+          id(modbus_controller_offline).start_poller();

tests/integration/fixtures/uart_mock_modbus_no_threshold.yaml

@@ -54,7 +54,11 @@ modbus:
 sensor:
   - platform: sdm_meter
     address: 2
-    update_interval: 1s
+    id: sdm_meter_1
+    # update_interval is set to never to avoid automatic polling before the test starts the scenario.
+    # The test will manually start the poller after subscribing to states, to ensure no state changes are missed.
+    # This also allows us to assert there are no modbus errors/warnings during the initial request/response.
+    update_interval: never
     phase_a:
       voltage:
         name: sdm_voltage
@@ -64,4 +68,7 @@ button:
     name: "Start Scenario"
     id: start_scenario_btn
     on_press:
-      - lambda: "id(virtual_uart_dev).start_scenario();"
+      - lambda: |-
+          id(virtual_uart_dev).start_scenario();
+          id(sdm_meter_1).set_update_interval(1000);
+          id(sdm_meter_1).start_poller();

tests/integration/fixtures/uart_mock_modbus_server_controller.yaml

@@ -53,8 +53,8 @@ modbus:
 modbus_controller:
   - address: 1
     modbus_id: virtual_modbus_controller
-    update_interval: 1s
     id: modbus_controller_1
+    update_interval: 1s
 
 modbus_server:
   - address: 1
@@ -176,6 +176,4 @@ button:
   - platform: template
     name: "Start Scenario"
     id: start_scenario_btn
-    on_press:
-      - lambda: "id(virtual_uart_server).start_scenario();"
-      - lambda: "id(virtual_uart_controller).start_scenario();"
+    # This test does not have anything to start (mock is autostart)

tests/integration/fixtures/uart_mock_modbus_server_controller_multiple.yaml

@@ -113,7 +113,4 @@ button:
   - platform: template
     name: "Start Scenario"
     id: start_scenario_btn
-    on_press:
-      - lambda: "id(virtual_uart_server).start_scenario();"
-      - lambda: "id(virtual_uart_server_2).start_scenario();"
-      - lambda: "id(virtual_uart_controller).start_scenario();"
+    # This test does not have anything to start (mock is autostart)

tests/integration/fixtures/uart_mock_modbus_server_controller_write.yaml

@@ -326,6 +326,4 @@ button:
   - platform: template
     name: "Start Scenario"
     id: start_scenario_btn
-    on_press:
-      - lambda: "id(virtual_uart_server).start_scenario();"
-      - lambda: "id(virtual_uart_controller).start_scenario();"
+    # This test does not have anything to start (mock is autostart)

tests/integration/fixtures/uart_mock_modbus_timing.yaml

@@ -53,7 +53,11 @@ modbus:
 sensor:
   - platform: sdm_meter
     address: 2
-    update_interval: 1s
+    id: sdm_meter_1
+    # update_interval is set to never to avoid automatic polling before the test starts the scenario.
+    # The test will manually start the poller after subscribing to states, to ensure no state changes are missed.
+    # This also allows us to assert there are no modbus errors/warnings during the initial request/response.
+    update_interval: never
     phase_a:
       voltage:
         name: sdm_voltage
@@ -63,4 +67,7 @@ button:
     name: "Start Scenario"
     id: start_scenario_btn
     on_press:
-      - lambda: "id(virtual_uart_dev).start_scenario();"
+      - lambda: |-
+          id(virtual_uart_dev).start_scenario();
+          id(sdm_meter_1).set_update_interval(1000);
+          id(sdm_meter_1).start_poller();