Merge branch 'dev' into ota-idf-lazy-erase

tests/component_tests/bk72xx_ble/config/test_bk7238.yaml

@@ -0,0 +1,7 @@
+esphome:
+  name: bk-family-gate-7238
+
+bk72xx:
+  board: generic-bk7238
+
+bk72xx_ble:

tests/component_tests/bk72xx_ble/test_family_gate.py

@@ -16,6 +16,7 @@ from esphome.core import EsphomeError
         ("test_bk7231t.yaml", "BK7231T.*BLE 4.2"),
         ("test_bk7252.yaml", "BK7251.*BLE 4.2"),
         ("test_bk7231q.yaml", "BK7231Q.*no BLE"),
+        ("test_bk7238.yaml", "BK7238.*bootloader"),
     ],
 )
 def test_unsupported_family_rejected(

tests/component_tests/deep_sleep/test_deep_sleep.py

@@ -1,5 +1,13 @@
 """Tests for the deep sleep component."""
 
+import pytest
+
+from esphome import config_validation as cv
+from esphome.components import deep_sleep
+from esphome.const import CONF_WAKEUP_PIN, PlatformFramework
+
+from ..types import SetCoreConfigCallable
+
 
 def test_deep_sleep_setup(generate_main):
     """
@@ -83,3 +91,35 @@ def test_deep_sleep_run_duration_dictionary(generate_main):
         "    .gpio_cause = 30000,\n"
         "});"
     ) in main_cpp
+
+
+def test_deep_sleep_bk72xx_wakeup_pin_mode_at_both_levels_rejected(
+    set_core_config: SetCoreConfigCallable,
+) -> None:
+    """On BK72xx, wakeup_pin_mode at the top level and under the pin entry is an error."""
+    set_core_config(PlatformFramework.BK72XX_ARDUINO)
+    config = {
+        CONF_WAKEUP_PIN: [
+            {"pin": "GPIO12", deep_sleep.CONF_WAKEUP_PIN_MODE: "KEEP_AWAKE"}
+        ],
+        deep_sleep.CONF_WAKEUP_PIN_MODE: "INVERT_WAKEUP",
+    }
+    with pytest.raises(cv.Invalid, match="not both"):
+        deep_sleep.validate_config(config)
+
+
+def test_deep_sleep_bk72xx_top_level_wakeup_pin_mode_moved_onto_single_pin(
+    set_core_config: SetCoreConfigCallable,
+) -> None:
+    """On BK72xx, a top-level wakeup_pin_mode is moved onto the only pin entry."""
+    set_core_config(PlatformFramework.BK72XX_ARDUINO)
+    config = {
+        CONF_WAKEUP_PIN: [{"pin": "GPIO12"}],
+        deep_sleep.CONF_WAKEUP_PIN_MODE: "INVERT_WAKEUP",
+    }
+    result = deep_sleep.validate_config(config)
+
+    assert deep_sleep.CONF_WAKEUP_PIN_MODE not in result
+    assert (
+        result[CONF_WAKEUP_PIN][0][deep_sleep.CONF_WAKEUP_PIN_MODE] == "INVERT_WAKEUP"
+    )

tests/component_tests/emontx/test_sensor_defaults.py

@@ -0,0 +1,100 @@
+"""Tests for emontx sensor tag defaults."""
+
+import pytest
+
+from esphome.components import sensor
+from esphome.components.emontx.sensor import CONFIG_SCHEMA, apply_tag_defaults
+from esphome.const import (
+    CONF_ACCURACY_DECIMALS,
+    CONF_STATE_CLASS,
+    STATE_CLASS_MEASUREMENT,
+    STATE_CLASS_TOTAL_INCREASING,
+)
+
+
+def _resolve_via_config_schema(tag: str) -> dict:
+    """Run a minimal config through the real CONFIG_SCHEMA pipeline, the
+    same path a user's YAML goes through."""
+    return CONFIG_SCHEMA(
+        {"tag_name": tag, "emontx_id": "my_emontx", "name": f"{tag} sensor"}
+    )
+
+
+def test_config_schema_applies_tag_default_state_class():
+    """If sensor_schema(state_class=...) is reintroduced, the schema-level
+    default wins over apply_tag_defaults' per-prefix value, and E1 would
+    resolve to measurement instead of total_increasing. Driving the real
+    CONFIG_SCHEMA (not just apply_tag_defaults) catches that, since
+    sensor_schema() runs before apply_tag_defaults in the cv.All() chain.
+    """
+    result = _resolve_via_config_schema("E1")
+    assert result[CONF_STATE_CLASS] == sensor.validate_state_class(
+        STATE_CLASS_TOTAL_INCREASING
+    )
+
+
+def test_config_schema_applies_tag_default_accuracy_decimals():
+    """Same root cause as the state_class regression: reintroducing
+    sensor_schema(accuracy_decimals=...) would make V1 resolve to the
+    schema-level default instead of the prefix-specific value of 2.
+    """
+    result = _resolve_via_config_schema("V1")
+    assert result[CONF_ACCURACY_DECIMALS] == 2
+
+
+def _make_config(tag: str) -> dict:
+    """Minimal config dict with only tag_name set — no overrides."""
+    return {"tag_name": tag}
+
+
+@pytest.mark.parametrize(
+    ("tag", "expected_state_class", "expected_decimals"),
+    [
+        # Known numeric-index prefixes
+        ("E1", STATE_CLASS_TOTAL_INCREASING, 0),
+        ("E12", STATE_CLASS_TOTAL_INCREASING, 0),
+        ("P1", STATE_CLASS_MEASUREMENT, 0),
+        ("V1", STATE_CLASS_MEASUREMENT, 2),
+        ("I1", STATE_CLASS_MEASUREMENT, 2),
+        ("T1", STATE_CLASS_MEASUREMENT, 2),
+        # Known patterns
+        ("PULSE1", STATE_CLASS_TOTAL_INCREASING, 0),
+        ("PULSE12", STATE_CLASS_TOTAL_INCREASING, 0),
+        ("PF1", STATE_CLASS_MEASUREMENT, 2),
+        # Unknown / free-form tags fall back to generic defaults
+        ("CUSTOM1", STATE_CLASS_MEASUREMENT, 0),
+        ("X", STATE_CLASS_MEASUREMENT, 0),
+    ],
+)
+def test_apply_tag_defaults(tag, expected_state_class, expected_decimals):
+    """apply_tag_defaults must inject the correct state_class and accuracy_decimals
+    for each tag type when no user overrides are present."""
+    config = _make_config(tag)
+    result = apply_tag_defaults(config)
+
+    assert result[CONF_STATE_CLASS] == sensor.validate_state_class(expected_state_class)
+    assert result[CONF_ACCURACY_DECIMALS] == expected_decimals
+
+
+@pytest.mark.parametrize(
+    ("tag", "user_state_class", "user_decimals"),
+    [
+        # User overrides must not be clobbered by defaults
+        ("E1", STATE_CLASS_MEASUREMENT, 3),
+        ("PULSE1", STATE_CLASS_MEASUREMENT, 1),
+        ("V1", STATE_CLASS_TOTAL_INCREASING, 0),
+        ("CUSTOM1", STATE_CLASS_TOTAL_INCREASING, 4),
+    ],
+)
+def test_apply_tag_defaults_respects_user_overrides(
+    tag, user_state_class, user_decimals
+):
+    """apply_tag_defaults must not overwrite values already set by the user."""
+    config = _make_config(tag)
+    config[CONF_STATE_CLASS] = sensor.validate_state_class(user_state_class)
+    config[CONF_ACCURACY_DECIMALS] = user_decimals
+
+    result = apply_tag_defaults(config)
+
+    assert result[CONF_STATE_CLASS] == sensor.validate_state_class(user_state_class)
+    assert result[CONF_ACCURACY_DECIMALS] == user_decimals

tests/components/captive_portal/__init__.py

@@ -0,0 +1,10 @@
+from tests.testing_helpers import ComponentManifestOverride
+
+
+def override_manifest(manifest: ComponentManifestOverride) -> None:
+    # The scan list helper is header-only and needs none of the component's real
+    # dependencies. Pulling them in breaks the host build: web_server_base
+    # includes ESPAsyncWebServer.h and ota.web_server includes md5/md5.h, neither
+    # of which exists there.
+    manifest.dependencies = []
+    manifest.auto_load = []

tests/components/captive_portal/scan_list_test.cpp

@@ -0,0 +1,130 @@
+#include <gtest/gtest.h>
+
+#include <cstdint>
+#include <string>
+#include <vector>
+
+#include "esphome/components/captive_portal/scan_list.h"
+
+namespace esphome::captive_portal::testing {
+
+namespace {
+
+// Stand-in for wifi::WiFiScanResult, which does not compile on the host.
+struct Entry {
+  std::string ssid;
+  int8_t rssi;
+  bool with_auth{true};
+  bool is_hidden{false};
+
+  // Compares length and bytes like CompactString does, so an embedded NUL counts.
+  bool ssid_equals(const Entry &other) const { return this->ssid == other.ssid; }
+  int8_t get_rssi() const { return this->rssi; }
+  bool get_with_auth() const { return this->with_auth; }
+  bool get_is_hidden() const { return this->is_hidden; }
+};
+
+// One row as the portal would emit it.
+struct Row {
+  std::string ssid;
+  int8_t rssi;
+  bool lock;
+
+  bool operator==(const Row &rhs) const { return ssid == rhs.ssid && rssi == rhs.rssi && lock == rhs.lock; }
+};
+
+// Walk the results the way handle_config does and collect the rows that survive.
+std::vector<Row> rows(const std::vector<Entry> &results) {
+  std::vector<Row> out;
+  for (size_t i = 0; i < results.size(); i++) {
+    bool with_auth = false;
+    if (!should_show_scan_entry(results, results[i], with_auth))
+      continue;
+    out.push_back({results[i].ssid, results[i].rssi, with_auth});
+  }
+  return out;
+}
+
+}  // namespace
+
+TEST(ScanList, SingleEntryShown) {
+  std::vector<Entry> results = {{"Home", -60}};
+  EXPECT_EQ(rows(results), (std::vector<Row>{{"Home", -60, true}}));
+}
+
+TEST(ScanList, DistinctSsidsAllShownInOrder) {
+  std::vector<Entry> results = {{"Home", -60}, {"Guest", -70}, {"Cafe", -40}};
+  EXPECT_EQ(rows(results), (std::vector<Row>{{"Home", -60, true}, {"Guest", -70, true}, {"Cafe", -40, true}}));
+}
+
+// Results are ordered by connection preference, not RSSI, so the strongest entry
+// can sit anywhere in the list.
+TEST(ScanList, SameSsidKeepsStrongest) {
+  std::vector<Entry> results = {{"Home", -70}, {"Home", -50}, {"Home", -60}};
+  EXPECT_EQ(rows(results), (std::vector<Row>{{"Home", -50, true}}));
+}
+
+TEST(ScanList, EqualRssiKeepsFirst) {
+  std::vector<Entry> results = {{"Home", -60}, {"Home", -60}, {"Home", -60}};
+  bool with_auth = false;
+  EXPECT_TRUE(should_show_scan_entry(results, results[0], with_auth));
+  EXPECT_FALSE(should_show_scan_entry(results, results[1], with_auth));
+  EXPECT_FALSE(should_show_scan_entry(results, results[2], with_auth));
+  EXPECT_EQ(rows(results), (std::vector<Row>{{"Home", -60, true}}));
+}
+
+// with_auth is an out-parameter that must only be written for a shown entry.
+TEST(ScanList, WithAuthUntouchedWhenNotShown) {
+  std::vector<Entry> results = {{"Home", -50, false}, {"Home", -70, true}};
+  bool with_auth = false;
+  EXPECT_FALSE(should_show_scan_entry(results, results[1], with_auth));
+  EXPECT_FALSE(with_auth);
+}
+
+TEST(ScanList, DuplicatesInterleavedWithOtherNetworks) {
+  std::vector<Entry> results = {{"Home", -70}, {"Guest", -55}, {"Home", -50}, {"Guest", -65}};
+  EXPECT_EQ(rows(results), (std::vector<Row>{{"Guest", -55, true}, {"Home", -50, true}}));
+}
+
+// Hidden networks scan with an empty SSID. They are never listed and do not
+// collapse into each other or into anything else.
+TEST(ScanList, HiddenEntriesNeverShown) {
+  std::vector<Entry> results = {{"", -40, true, true}, {"Home", -70}, {"", -30, true, true}};
+  EXPECT_EQ(rows(results), (std::vector<Row>{{"Home", -70, true}}));
+}
+
+// On ESP8266 the hidden flag comes from the driver alongside a real SSID, so a
+// hidden access point can share its name with a visible one. It must not
+// outrank that visible entry and leave the network unlisted.
+TEST(ScanList, HiddenEntryDoesNotSuppressVisibleSameSsid) {
+  std::vector<Entry> results = {{"Home", -40, true, true}, {"Home", -70}};
+  EXPECT_EQ(rows(results), (std::vector<Row>{{"Home", -70, true}}));
+}
+
+// An open access point and a secured one sharing an SSID collapse to one row that
+// still asks for a password, whichever of them is strongest.
+TEST(ScanList, LockSetWhenAnyEntryRequiresAuth) {
+  std::vector<Entry> open_stronger = {{"Home", -50, false}, {"Home", -70, true}};
+  EXPECT_EQ(rows(open_stronger), (std::vector<Row>{{"Home", -50, true}}));
+
+  std::vector<Entry> secured_stronger = {{"Home", -70, false}, {"Home", -50, true}};
+  EXPECT_EQ(rows(secured_stronger), (std::vector<Row>{{"Home", -50, true}}));
+}
+
+TEST(ScanList, LockClearWhenEveryEntryIsOpen) {
+  std::vector<Entry> results = {{"Cafe", -60, false}, {"Cafe", -50, false}};
+  EXPECT_EQ(rows(results), (std::vector<Row>{{"Cafe", -50, false}}));
+}
+
+// The auth flag of an unrelated network must not leak into another SSID's row.
+TEST(ScanList, LockIsPerSsid) {
+  std::vector<Entry> results = {{"Cafe", -60, false}, {"Home", -50, true}};
+  EXPECT_EQ(rows(results), (std::vector<Row>{{"Cafe", -60, false}, {"Home", -50, true}}));
+}
+
+TEST(ScanList, EmptyListShowsNothing) {
+  std::vector<Entry> results;
+  EXPECT_TRUE(rows(results).empty());
+}
+
+}  // namespace esphome::captive_portal::testing

tests/components/emontx/test.esp32-idf.yaml

@@ -1,4 +1,3 @@
 packages:
   uart_115200: !include ../../test_build_components/common/uart_115200/esp32-idf.yaml
-
-<<: !include common.yaml
+  emontx: !include common.yaml

tests/components/emontx/test.esp8266-ard.yaml

@@ -1,4 +1,3 @@
 packages:
   uart_115200: !include ../../test_build_components/common/uart_115200/esp8266-ard.yaml
-
-<<: !include common.yaml
+  emontx: !include common.yaml

tests/components/emontx/test.rp2040-ard.yaml

@@ -1,4 +1,3 @@
 packages:
   uart_115200: !include ../../test_build_components/common/uart_115200/rp2040-ard.yaml
-
-<<: !include common.yaml
+  emontx: !include common.yaml

tests/components/emontx/validate.esp32-idf.yaml

@@ -0,0 +1,73 @@
+packages:
+  uart_115200: !include ../../test_build_components/common/uart_115200/esp32-idf.yaml
+  emontx: !include common.yaml
+
+# Validate that each sensor type gets the correct default state_class,
+# unit_of_measurement, device_class, and accuracy_decimals when NO overrides
+# are provided. The values are intentionally omitted so apply_tag_defaults is
+# exercised, not the user-override path.
+
+sensor:
+  # Energy sensor (E prefix): expects state_class=total_increasing, unit=Wh,
+  # device_class=energy, accuracy_decimals=0
+  - platform: emontx
+    tag_name: E1
+    name: Energy 1
+    emontx_id: test_emontx
+
+  # Power sensor (P prefix): expects state_class=measurement, unit=W,
+  # device_class=power, accuracy_decimals=0
+  - platform: emontx
+    tag_name: P1
+    name: Power 1
+    emontx_id: test_emontx
+
+  # Voltage sensor (V prefix): expects state_class=measurement, unit=V,
+  # device_class=voltage, accuracy_decimals=2
+  - platform: emontx
+    tag_name: V1
+    name: Voltage 1
+    emontx_id: test_emontx
+
+  # Current sensor (I prefix): expects state_class=measurement, unit=A,
+  # device_class=current, accuracy_decimals=2
+  - platform: emontx
+    tag_name: I1
+    name: Current 1
+    emontx_id: test_emontx
+
+  # Temperature sensor (T prefix): expects state_class=measurement, unit=°C,
+  # device_class=temperature, accuracy_decimals=2
+  - platform: emontx
+    tag_name: T1
+    name: Temperature 1
+    emontx_id: test_emontx
+
+  # Pulse sensor (PULSE pattern): expects state_class=total_increasing,
+  # unit=pulses, device_class=energy, accuracy_decimals=0
+  - platform: emontx
+    tag_name: PULSE1
+    name: Pulse 1
+    emontx_id: test_emontx
+
+  # Power factor sensor (PF pattern): expects state_class=measurement,
+  # device_class=power_factor, accuracy_decimals=2
+  - platform: emontx
+    tag_name: PF1
+    name: Power Factor 1
+    emontx_id: test_emontx
+
+  # Unknown tag: no prefix match, falls back to state_class=measurement,
+  # accuracy_decimals=0
+  - platform: emontx
+    tag_name: CUSTOM1
+    name: Custom sensor
+    emontx_id: test_emontx
+
+  # User override: verify that explicit values are respected and not clobbered
+  - platform: emontx
+    tag_name: E2
+    name: Energy 2 (user override)
+    emontx_id: test_emontx
+    state_class: measurement
+    accuracy_decimals: 3

tests/components/esp32_hosted/test-embedded.esp32-p4-idf.yaml

@@ -6,3 +6,6 @@ update:
     type: embedded
     path: $component_dir/test_firmware.bin
     sha256: de2f256064a0af797747c2b97505dc0b9f3df0de4f489eac731c23ae9ca9cc31
+    on_update_available:
+      then:
+        - logger.log: "Coprocessor update available"

tests/components/esp32_hosted/test-http.esp32-p4-idf.yaml

@@ -8,3 +8,6 @@ update:
     type: http
     source: https://esphome.github.io/esp-hosted-firmware/manifest/esp32c6.json
     update_interval: 6h
+    on_update_available:
+      then:
+        - logger.log: "Coprocessor update available"

tests/components/mitsubishi_cn105/climate/mitsubishi_cn105_climate_tests.cpp

@@ -1,7 +1,67 @@
+#include <array>
+#include <utility>
 #include "../common.h"
 
 namespace esphome::mitsubishi_cn105::testing {
 
+TEST(MitsubishiCN105ClimateTests, CelsiusTemperatureMappingAndTraitsMatchExpectedValues) {
+  TestableMitsubishiCN105Climate sut;
+  const auto mapping = TemperatureMapping();
+
+  for (int temperature = 16; temperature <= 31; ++temperature) {
+    EXPECT_EQ(mapping.to_mitsubishi(temperature), temperature);
+    EXPECT_EQ(mapping.from_mitsubishi(temperature), temperature);
+  }
+
+  const auto traits = sut.traits();
+  EXPECT_EQ(traits.get_temperature_unit(), TemperatureUnit::CELSIUS);
+  EXPECT_FLOAT_EQ(traits.get_visual_min_temperature(), 16.0f);
+  EXPECT_FLOAT_EQ(traits.get_visual_max_temperature(), 31.0f);
+  EXPECT_FLOAT_EQ(traits.get_visual_target_temperature_step(), 1.0f);
+  EXPECT_FLOAT_EQ(traits.get_visual_current_temperature_step(), 0.5f);
+}
+
+TEST(MitsubishiCN105ClimateTests, FahrenheitTemperatureMappingAndTraitsMatchExpectedValues) {
+  TestableMitsubishiCN105Climate sut;
+  auto mapping = TemperatureMapping();
+  mapping.set_use_fahrenheit(true);
+  sut.set_use_fahrenheit(true);
+
+  const std::array cases{
+      std::pair{61, 16.0f}, std::pair{62, 16.5f}, std::pair{63, 17.0f}, std::pair{64, 17.5f}, std::pair{65, 18.0f},
+      std::pair{66, 18.5f}, std::pair{67, 19.0f}, std::pair{68, 20.0f}, std::pair{69, 21.0f}, std::pair{70, 21.5f},
+      std::pair{71, 22.0f}, std::pair{72, 22.5f}, std::pair{73, 23.0f}, std::pair{74, 23.5f}, std::pair{75, 24.0f},
+      std::pair{76, 24.5f}, std::pair{77, 25.0f}, std::pair{78, 25.5f}, std::pair{79, 26.0f}, std::pair{80, 26.5f},
+      std::pair{81, 27.0f}, std::pair{82, 27.5f}, std::pair{83, 28.0f}, std::pair{84, 28.5f}, std::pair{85, 29.0f},
+      std::pair{86, 29.5f}, std::pair{87, 30.0f}, std::pair{88, 30.5f},
+  };
+
+  for (const auto &[fahrenheit, mitsubishi_celsius] : cases) {
+    EXPECT_FLOAT_EQ(mapping.to_mitsubishi(fahrenheit), mitsubishi_celsius);
+    EXPECT_FLOAT_EQ(mapping.from_mitsubishi(mitsubishi_celsius), fahrenheit);
+  }
+  const auto traits = sut.traits();
+  EXPECT_EQ(traits.get_temperature_unit(), TemperatureUnit::FAHRENHEIT);
+  EXPECT_FLOAT_EQ(traits.get_visual_min_temperature(), 61.0f);
+  EXPECT_FLOAT_EQ(traits.get_visual_max_temperature(), 88.0f);
+  EXPECT_FLOAT_EQ(traits.get_visual_target_temperature_step(), 1.0f);
+  EXPECT_FLOAT_EQ(traits.get_visual_current_temperature_step(), 1.0f);
+}
+
+TEST(MitsubishiCN105ClimateTests, FahrenheitTemperatureMappingUsesLinearConversionOutsideSetpointRange) {
+  auto mapping = TemperatureMapping();
+  mapping.set_use_fahrenheit(true);
+
+  const std::array cases{
+      std::pair{0.0f, 32.0f},  std::pair{10.0f, 50.0f}, std::pair{15.5f, 59.9f},
+      std::pair{31.0f, 87.8f}, std::pair{35.0f, 95.0f}, std::pair{40.0f, 104.0f},
+  };
+
+  for (const auto &[celsius, fahrenheit] : cases) {
+    EXPECT_FLOAT_EQ(mapping.from_mitsubishi(celsius), fahrenheit);
+  }
+}
+
 TEST(MitsubishiCN105ClimateTests, SupportedSwingModeOffLeavesTraitsEmpty) {
   TestableMitsubishiCN105Climate sut;
 

tests/components/mitsubishi_cn105/common.h

@@ -73,6 +73,7 @@ class TestableMitsubishiCN105Climate : public MitsubishiCN105Climate {
   using MitsubishiCN105Climate::last_non_swing_wide_vane_mode_;
 
   MitsubishiCN105::Status &status() { return const_cast<MitsubishiCN105::Status &>(this->component_.status()); }
+  void set_use_fahrenheit(bool value) { this->component_.set_use_fahrenheit(value); }
 
  protected:
   MitsubishiCN105Component component_;

tests/components/mitsubishi_cn105/common.yaml

@@ -3,6 +3,7 @@ mitsubishi_cn105:
   uart_id: uart_bus
   update_interval: 30s
   telemetry_request_min_interval: 120s
+  use_fahrenheit: true
   vane:
     on_state:
       - logger.log:

tests/components/remote_transmitter/test.bk72xx-ard.yaml

@@ -0,0 +1,7 @@
+remote_transmitter:
+  id: xmitr
+  pin: GPIO26
+  carrier_duty_percent: 50%
+
+packages:
+  buttons: !include common-buttons.yaml

tests/components/remote_transmitter/test.rtl87xx-ard.yaml

@@ -0,0 +1,7 @@
+remote_transmitter:
+  id: xmitr
+  pin: GPIO12
+  carrier_duty_percent: 50%
+
+packages:
+  buttons: !include common-buttons.yaml

tests/components/sendspin/common-action.yaml

@@ -1,6 +1,6 @@
 # `sendspin.switch` action enables the controller role, so we use a standalone test
 packages:
-  base: !include common.yaml
+  sendspin: !include common.yaml
 
 wifi:
   on_connect:

tests/components/sendspin/common-ethernet.yaml

@@ -0,0 +1,5 @@
+packages:
+  sendspin_hub: !include common-hub.yaml
+
+ethernet:
+  type: OPENETH

tests/components/sendspin/common-hub.yaml

@@ -0,0 +1,6 @@
+psram:
+  mode: quad
+
+sendspin:
+  id: sendspin_hub_id
+  task_stack_in_psram: true

tests/components/sendspin/common-media_player.yaml

@@ -1,4 +1,5 @@
-<<: !include common.yaml
+packages:
+  sendspin: !include common.yaml
 
 media_player:
   - platform: sendspin

tests/components/sendspin/common-media_source.yaml

@@ -1,4 +1,5 @@
-<<: !include common.yaml
+packages:
+  sendspin: !include common.yaml
 
 media_source:
   - platform: sendspin

tests/components/sendspin/common-sensor.yaml

@@ -1,4 +1,5 @@
-<<: !include common.yaml
+packages:
+  sendspin: !include common.yaml
 
 sensor:
   - platform: sendspin

tests/components/sendspin/common-text_sensor.yaml

@@ -1,4 +1,5 @@
-<<: !include common.yaml
+packages:
+  sendspin: !include common.yaml
 
 text_sensor:
   - platform: sendspin

tests/components/sendspin/common.yaml

@@ -1,9 +1,5 @@
+packages:
+  sendspin_hub: !include common-hub.yaml
+
 wifi:
   ap:
-
-psram:
-  mode: quad
-
-sendspin:
-  id: sendspin_hub_id
-  task_stack_in_psram: true

tests/components/sendspin/test-action.esp32-idf.yaml

@@ -1 +1,2 @@
-<<: !include common-action.yaml
+packages:
+  sendspin: !include common-action.yaml

tests/components/sendspin/test-ethernet.esp32-idf.yaml

@@ -1,9 +1,2 @@
-ethernet:
-  type: OPENETH
-
-psram:
-  mode: quad
-
-sendspin:
-  id: sendspin_hub_id
-  task_stack_in_psram: true
+packages:
+  sendspin: !include common-ethernet.yaml

tests/components/sendspin/test-media_player.esp32-idf.yaml

@@ -1 +1,2 @@
-<<: !include common-media_player.yaml
+packages:
+  sendspin: !include common-media_player.yaml

tests/components/sendspin/test-media_source.esp32-idf.yaml

@@ -1 +1,2 @@
-<<: !include common-media_source.yaml
+packages:
+  sendspin: !include common-media_source.yaml

tests/components/sendspin/test-sensor.esp32-idf.yaml

@@ -1 +1,2 @@
-<<: !include common-sensor.yaml
+packages:
+  sendspin: !include common-sensor.yaml

tests/components/sendspin/test-text_sensor.esp32-idf.yaml

@@ -1 +1,2 @@
-<<: !include common-text_sensor.yaml
+packages:
+  sendspin: !include common-text_sensor.yaml

tests/components/sendspin/test.esp32-idf.yaml

@@ -1 +1,2 @@
-<<: !include common.yaml
+packages:
+  sendspin: !include common.yaml

tests/unit_tests/test_main.py

@@ -11,6 +11,7 @@ from pathlib import Path
 import re
 import sys
 import time
+from types import SimpleNamespace
 from typing import Any, Self
 from unittest.mock import AsyncMock, MagicMock, Mock, patch
 
@@ -18,7 +19,7 @@ import pytest
 from pytest import CaptureFixture
 from zeroconf import ServiceStateChange
 
-from esphome import __main__ as main
+from esphome import __main__ as main, yaml_util
 from esphome.__main__ import (
     Purpose,
     _get_configured_xtal_freq,
@@ -29,6 +30,7 @@ from esphome.__main__ import (
     _unresolved_default_error,
     _validate_bootloader_binary,
     _validate_partition_table_binary,
+    _wrap_to_code,
     check_permissions,
     choose_upload_log_host,
     command_analyze_memory,
@@ -116,6 +118,7 @@ from esphome.espota2 import (
     OTA_TYPE_UPDATE_PARTITION_TABLE,
 )
 from esphome.platformio import toolchain
+from esphome.types import ConfigType
 from esphome.util import BootselResult, FlashImage
 from esphome.zeroconf import _await_discovery, discover_mdns_devices
 
@@ -7130,3 +7133,28 @@ def test_warn_source_tree_mismatch_falls_back_when_stat_fails(
 
     # Same tree, so the path comparison still finds them equal and stays silent
     assert not caplog.text
+
+
+@pytest.mark.asyncio
+async def test_wrap_to_code_comment_is_insertion_order_independent() -> None:
+    """The config comment dumps with sorted keys: voluptuous fills schema
+    defaults in set-iteration order, so an unsorted dump would churn
+    main.cpp and relink the firmware on every run."""
+    comments: list[str] = []
+
+    async def to_code(conf: ConfigType) -> None:
+        """Accept any config; only the wrapper's comment output matters."""
+
+    comp = SimpleNamespace(to_code=to_code, config_schema=object())
+    wrapped = _wrap_to_code("demo", comp, yaml_util)
+    with patch("esphome.codegen.add", side_effect=lambda st: comments.append(str(st))):
+        # Nested on purpose: the real churn lives in nested action configs,
+        # so sorting must apply at every mapping level
+        await wrapped({"beta": 1, "alpha": {"z": 1, "a": 2}})
+        first = "\n".join(comments)
+        comments.clear()
+        await wrapped({"alpha": {"a": 2, "z": 1}, "beta": 1})
+    second = "\n".join(comments)
+    assert first == second
+    assert second.index("alpha") < second.index("beta")
+    assert second.index("a: 2") < second.index("z: 1")