[epaper_spi] Add UC8179 mono driver and Seeed reTerminal E1001 model

tests/component_tests/epaper_spi/config/uc8179_e1001_test.yaml

@@ -0,0 +1,15 @@
+esphome:
+  name: test
+
+esp32:
+  board: esp32-s3-devkitc-1
+  variant: esp32s3
+
+spi:
+  clk_pin: GPIO7
+  mosi_pin: GPIO9
+
+display:
+  - platform: epaper_spi
+    id: epaper_display
+    model: seeed-reterminal-e1001

tests/component_tests/epaper_spi/test_init.py

@@ -439,6 +439,23 @@ def test_enable_pin_multiple(
     assert all(pin["mode"]["output"] is True for pin in enable_pins)
 
 
+def test_uc8179_e1001_code_generation(
+    generate_main: Callable[[str | Path], str],
+    component_config_path: Callable[[str], Path],
+) -> None:
+    """Test that the reTerminal E1001 model generates the UC8179 driver and init sequence."""
+    main_cpp = generate_main(component_config_path("uc8179_e1001_test.yaml"))
+
+    # The model must instantiate the UC8179 driver class with the panel dimensions
+    assert "epaper_spi::EPaperUC8179" in main_cpp
+    assert '"SEEED-RETERMINAL-E1001", 800, 480' in main_cpp
+
+    # The generated init sequence must contain the UC8179 resolution setting
+    # for 800x480: command 0x61, 4 data bytes 0x03 0x20 0x01 0xE0
+    # (rendered as decimal in the generated array)
+    assert "97, 4, 3, 32, 1, 224" in main_cpp
+
+
 def test_enable_pin_code_generation(
     generate_main: Callable[[str | Path], str],
     component_config_path: Callable[[str], Path],

tests/components/epaper_spi/test.esp32-s3-idf.yaml

@@ -232,3 +232,45 @@ display:
       it.filled_rectangle(0, 0, it.get_width(), it.get_height(), Color::WHITE);
       it.circle(it.get_width() / 2, it.get_height() / 2, 100, Color::BLACK);
       it.circle(it.get_width() / 2, it.get_height() / 2, 60, Color(255, 0, 0));
+
+  # Waveshare 7.5" V2 mono (800x480, UC8179 controller, EPD_7in5_V2)
+  # full_update_every > 1 exercises the fast/partial refresh paths
+  - platform: epaper_spi
+    spi_id: spi_bus
+    model: waveshare-7.5in-v2
+    full_update_every: 4
+    cs_pin:
+      allow_other_uses: true
+      number: GPIO5
+    dc_pin:
+      allow_other_uses: true
+      number: GPIO17
+    reset_pin:
+      allow_other_uses: true
+      number: GPIO16
+    busy_pin:
+      allow_other_uses: true
+      number: GPIO4
+      inverted: true
+    lambda: |-
+      it.filled_rectangle(0, 0, it.get_width(), it.get_height(), Color::WHITE);
+      it.circle(it.get_width() / 2, it.get_height() / 2, 100, Color::BLACK);
+
+  # Seeed reTerminal E1001 - 7.5" mono e-paper (800x480, UC8179)
+  # Pins overridden to avoid conflicts with the E1002 defaults above
+  - platform: epaper_spi
+    spi_id: spi_bus
+    model: seeed-reterminal-e1001
+    cs_pin:
+      allow_other_uses: true
+      number: GPIO5
+    dc_pin:
+      allow_other_uses: true
+      number: GPIO17
+    reset_pin:
+      allow_other_uses: true
+      number: GPIO16
+    busy_pin:
+      allow_other_uses: true
+      number: GPIO4
+      inverted: true