test: Rename zigbee_proxy to zigbee_proxy_tap

2026-10-07 03:16:37 +00:00 · 2026-09-09 20:07:16 +00:00
parent 1c71adb6ca
commit 8aae67b7b2
16 changed files with 43 additions and 43 deletions
@@ -0,0 +1,5 @@
+# Gitignore settings for ESPHome
+# This is an example and may include too much for your use-case.
+# You can modify this file to suit your needs.
+/.esphome/
+/secrets.yaml
@@ -0,0 +1,22 @@
+esphome:
+  name: test
+
+wifi:
+  ssid: test
+  password: password
+  power_save_mode: none
+
+api:
+
+uart:
+  - id: zigbee_uart
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 115200
+
+# The port owns the UART and carries every byte; zigbee_proxy_tap only taps it
+serial_proxy:
+  - id: zigbee_serial
+    uart_id: zigbee_uart
+    name: Zigbee
+    port_type: TTL
@@ -0,0 +1,26 @@
+wifi:
+  ssid: test
+  password: password
+  power_save_mode: none
+
+api:
+
+usb_host:
+
+usb_uart:
+  - type: CDC_ACM
+    vid: 0x303A
+    pid: 0x831A
+    channels:
+      - id: zigbee_usb_channel
+        baud_rate: 460800
+
+# The tapped port may be a USB CDC ACM channel just as well as a hardware UART:
+# zigbee_proxy_tap never touches the UART itself, so it does not care which it is.
+serial_proxy:
+  - id: zigbee_usb_serial
+    uart_id: zigbee_usb_channel
+    name: Zigbee
+
+zigbee_proxy_tap:
+  serial_proxy_id: zigbee_usb_serial
@@ -0,0 +1,11 @@
+substitutions:
+  tx_pin: GPIO17
+  rx_pin: GPIO16
+
+esp32:
+  board: esp32dev
+
+<<: !include common.yaml
+
+zigbee_proxy_tap:
+  serial_proxy_id: zigbee_serial
@@ -0,0 +1,11 @@
+substitutions:
+  tx_pin: GPIO1
+  rx_pin: GPIO3
+
+esp8266:
+  board: nodemcuv2
+
+<<: !include common.yaml
+
+zigbee_proxy_tap:
+  serial_proxy_id: zigbee_serial
@@ -0,0 +1,8 @@
+substitutions:
+  tx_pin: GPIO0
+  rx_pin: GPIO1
+
+<<: !include common.yaml
+
+zigbee_proxy_tap:
+  serial_proxy_id: zigbee_serial