diff --git a/esphome/components/logger/logger_esp8266.cpp.bak b/esphome/components/logger/logger_esp8266.cpp.bak
deleted file mode 100644
index 5063d88b92..0000000000
--- a/esphome/components/logger/logger_esp8266.cpp.bak
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifdef USE_ESP8266
-#include "logger.h"
-#include "esphome/core/log.h"
-
-namespace esphome::logger {
-
-static const char *const TAG = "logger";
-
-void Logger::pre_setup() {
-  if (this->baud_rate_ > 0) {
-    switch (this->uart_) {
-      case UART_SELECTION_UART0:
-      case UART_SELECTION_UART0_SWAP:
-        this->hw_serial_ = &Serial;
-        Serial.begin(this->baud_rate_);
-        if (this->uart_ == UART_SELECTION_UART0_SWAP) {
-          Serial.swap();
-        }
-        Serial.setDebugOutput(ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_VERBOSE);
-        break;
-      case UART_SELECTION_UART1:
-        this->hw_serial_ = &Serial1;
-        Serial1.begin(this->baud_rate_);
-        Serial1.setDebugOutput(ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_VERBOSE);
-        break;
-    }
-  } else {
-    uart_set_debug(UART_NO);
-  }
-
-  global_logger = this;
-
-  ESP_LOGI(TAG, "Log initialized");
-}
-
-void HOT Logger::write_msg_(const char *msg) { this->hw_serial_->println(msg); }
-
-const LogString *Logger::get_uart_selection_() {
-  switch (this->uart_) {
-    case UART_SELECTION_UART0:
-      return LOG_STR("UART0");
-    case UART_SELECTION_UART1:
-      return LOG_STR("UART1");
-    case UART_SELECTION_UART0_SWAP:
-    default:
-      return LOG_STR("UART0_SWAP");
-  }
-}
-
-}  // namespace esphome::logger
-#endif
diff --git a/esphome/components/logger/logger_host.cpp.bak b/esphome/components/logger/logger_host.cpp.bak
deleted file mode 100644
index 4abe92286a..0000000000
--- a/esphome/components/logger/logger_host.cpp.bak
+++ /dev/null
@@ -1,22 +0,0 @@
-#if defined(USE_HOST)
-#include "logger.h"
-
-namespace esphome::logger {
-
-void HOT Logger::write_msg_(const char *msg) {
-  time_t rawtime;
-  struct tm *timeinfo;
-  char buffer[80];
-
-  time(&rawtime);
-  timeinfo = localtime(&rawtime);
-  strftime(buffer, sizeof buffer, "[%H:%M:%S]", timeinfo);
-  fputs(buffer, stdout);
-  puts(msg);
-}
-
-void Logger::pre_setup() { global_logger = this; }
-
-}  // namespace esphome::logger
-
-#endif
diff --git a/esphome/components/logger/logger_libretiny.cpp.bak b/esphome/components/logger/logger_libretiny.cpp.bak
deleted file mode 100644
index 3edfa74480..0000000000
--- a/esphome/components/logger/logger_libretiny.cpp.bak
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifdef USE_LIBRETINY
-#include "logger.h"
-
-namespace esphome::logger {
-
-static const char *const TAG = "logger";
-
-void Logger::pre_setup() {
-  if (this->baud_rate_ > 0) {
-    switch (this->uart_) {
-#if LT_HW_UART0
-      case UART_SELECTION_UART0:
-        this->hw_serial_ = &Serial0;
-        Serial0.begin(this->baud_rate_);
-        break;
-#endif
-#if LT_HW_UART1
-      case UART_SELECTION_UART1:
-        this->hw_serial_ = &Serial1;
-        Serial1.begin(this->baud_rate_);
-        break;
-#endif
-#if LT_HW_UART2
-      case UART_SELECTION_UART2:
-        this->hw_serial_ = &Serial2;
-        Serial2.begin(this->baud_rate_);
-        break;
-#endif
-      default:
-        this->hw_serial_ = &Serial;
-        Serial.begin(this->baud_rate_);
-        if (this->uart_ != UART_SELECTION_DEFAULT) {
-          ESP_LOGW(TAG, "  The chosen logger UART port is not available on this board."
-                        "The default port was used instead.");
-        }
-        break;
-    }
-
-    // change lt_log() port to match default Serial
-    if (this->uart_ == UART_SELECTION_DEFAULT) {
-      this->uart_ = (UARTSelection) (LT_UART_DEFAULT_SERIAL + 1);
-      lt_log_set_port(LT_UART_DEFAULT_SERIAL);
-    } else {
-      lt_log_set_port(this->uart_ - 1);
-    }
-  }
-
-  global_logger = this;
-  ESP_LOGI(TAG, "Log initialized");
-}
-
-void HOT Logger::write_msg_(const char *msg) { this->hw_serial_->println(msg); }
-
-const LogString *Logger::get_uart_selection_() {
-  switch (this->uart_) {
-    case UART_SELECTION_DEFAULT:
-      return LOG_STR("DEFAULT");
-    case UART_SELECTION_UART0:
-      return LOG_STR("UART0");
-    case UART_SELECTION_UART1:
-      return LOG_STR("UART1");
-    case UART_SELECTION_UART2:
-    default:
-      return LOG_STR("UART2");
-  }
-}
-
-}  // namespace esphome::logger
-
-#endif  // USE_LIBRETINY
diff --git a/esphome/components/logger/logger_rp2040.cpp.bak b/esphome/components/logger/logger_rp2040.cpp.bak
deleted file mode 100644
index 63727c2cda..0000000000
--- a/esphome/components/logger/logger_rp2040.cpp.bak
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifdef USE_RP2040
-#include "logger.h"
-#include "esphome/core/log.h"
-
-namespace esphome::logger {
-
-static const char *const TAG = "logger";
-
-void Logger::pre_setup() {
-  if (this->baud_rate_ > 0) {
-    switch (this->uart_) {
-      case UART_SELECTION_UART0:
-        this->hw_serial_ = &Serial1;
-        Serial1.begin(this->baud_rate_);
-        break;
-      case UART_SELECTION_UART1:
-        this->hw_serial_ = &Serial2;
-        Serial2.begin(this->baud_rate_);
-        break;
-      case UART_SELECTION_USB_CDC:
-        this->hw_serial_ = &Serial;
-        Serial.begin(this->baud_rate_);
-        break;
-    }
-  }
-  global_logger = this;
-  ESP_LOGI(TAG, "Log initialized");
-}
-
-void HOT Logger::write_msg_(const char *msg) { this->hw_serial_->println(msg); }
-
-const LogString *Logger::get_uart_selection_() {
-  switch (this->uart_) {
-    case UART_SELECTION_UART0:
-      return LOG_STR("UART0");
-    case UART_SELECTION_UART1:
-      return LOG_STR("UART1");
-#ifdef USE_LOGGER_USB_CDC
-    case UART_SELECTION_USB_CDC:
-      return LOG_STR("USB_CDC");
-#endif
-    default:
-      return LOG_STR("UNKNOWN");
-  }
-}
-
-}  // namespace esphome::logger
-#endif  // USE_RP2040
diff --git a/esphome/components/logger/logger_zephyr.cpp.bak b/esphome/components/logger/logger_zephyr.cpp.bak
deleted file mode 100644
index fb0c7dcca3..0000000000
--- a/esphome/components/logger/logger_zephyr.cpp.bak
+++ /dev/null
@@ -1,96 +0,0 @@
-#ifdef USE_ZEPHYR
-
-#include "esphome/core/application.h"
-#include "esphome/core/log.h"
-#include "logger.h"
-
-#include <zephyr/device.h>
-#include <zephyr/drivers/uart.h>
-#include <zephyr/usb/usb_device.h>
-
-namespace esphome::logger {
-
-static const char *const TAG = "logger";
-
-#ifdef USE_LOGGER_USB_CDC
-void Logger::loop() {
-  if (this->uart_ != UART_SELECTION_USB_CDC || nullptr == this->uart_dev_) {
-    return;
-  }
-  static bool opened = false;
-  uint32_t dtr = 0;
-  uart_line_ctrl_get(this->uart_dev_, UART_LINE_CTRL_DTR, &dtr);
-
-  /* Poll if the DTR flag was set, optional */
-  if (opened == dtr) {
-    return;
-  }
-
-  if (!opened) {
-    App.schedule_dump_config();
-  }
-  opened = !opened;
-}
-#endif
-
-void Logger::pre_setup() {
-  if (this->baud_rate_ > 0) {
-    static const struct device *uart_dev = nullptr;
-    switch (this->uart_) {
-      case UART_SELECTION_UART0:
-        uart_dev = DEVICE_DT_GET_OR_NULL(DT_NODELABEL(uart0));
-        break;
-      case UART_SELECTION_UART1:
-        uart_dev = DEVICE_DT_GET_OR_NULL(DT_NODELABEL(uart1));
-        break;
-#ifdef USE_LOGGER_USB_CDC
-      case UART_SELECTION_USB_CDC:
-        uart_dev = DEVICE_DT_GET_OR_NULL(DT_NODELABEL(cdc_acm_uart0));
-        if (device_is_ready(uart_dev)) {
-          usb_enable(nullptr);
-        }
-        break;
-#endif
-    }
-    if (!device_is_ready(uart_dev)) {
-      ESP_LOGE(TAG, "%s is not ready.", LOG_STR_ARG(get_uart_selection_()));
-    } else {
-      this->uart_dev_ = uart_dev;
-    }
-  }
-  global_logger = this;
-  ESP_LOGI(TAG, "Log initialized");
-}
-
-void HOT Logger::write_msg_(const char *msg) {
-#ifdef CONFIG_PRINTK
-  printk("%s\n", msg);
-#endif
-  if (nullptr == this->uart_dev_) {
-    return;
-  }
-  while (*msg) {
-    uart_poll_out(this->uart_dev_, *msg);
-    ++msg;
-  }
-  uart_poll_out(this->uart_dev_, '\n');
-}
-
-const LogString *Logger::get_uart_selection_() {
-  switch (this->uart_) {
-    case UART_SELECTION_UART0:
-      return LOG_STR("UART0");
-    case UART_SELECTION_UART1:
-      return LOG_STR("UART1");
-#ifdef USE_LOGGER_USB_CDC
-    case UART_SELECTION_USB_CDC:
-      return LOG_STR("USB_CDC");
-#endif
-    default:
-      return LOG_STR("UNKNOWN");
-  }
-}
-
-}  // namespace esphome::logger
-
-#endif