diff --git a/esphome/components/light/addressable_light.cpp b/esphome/components/light/addressable_light.cpp
index 2f6ffc9a38..5f5f123fe7 100644
--- a/esphome/components/light/addressable_light.cpp
+++ b/esphome/components/light/addressable_light.cpp
@@ -58,6 +58,24 @@ void AddressableLightTransformer::start() {
   // our transition will handle brightness, disable brightness in correction.
   this->light_.correction_.set_local_brightness(255);
   this->target_color_ *= to_uint8_scale(end_values.get_brightness() * end_values.get_state());
+
+  // When every LED starts at the same color (the common case: plain turn_on/turn_off on a uniform
+  // strip), interpolate math-only against a single start color. Avoiding the per-step read-back
+  // through the 8-bit stored byte prevents gamma round-trip quantization from stalling the fade
+  // at low values (e.g. gamma 2.8 pre-gamma values <27 round to stored 0, freezing progress).
+  this->uniform_start_color_.reset();
+  if (this->light_.size() > 0) {
+    Color first = this->light_[0].get();
+    bool uniform = true;
+    for (int32_t i = 1; i < this->light_.size(); i++) {
+      if (this->light_[i].get() != first) {
+        uniform = false;
+        break;
+      }
+    }
+    if (uniform)
+      this->uniform_start_color_ = first;
+  }
 }
 
 inline constexpr uint8_t subtract_scaled_difference(uint8_t a, uint8_t b, int32_t scale) {
@@ -97,12 +115,34 @@ optional<LightColorValues> AddressableLightTransformer::apply() {
   // non-linear when applying small deltas.
 
   if (smoothed_progress > this->last_transition_progress_ && this->last_transition_progress_ < 1.f) {
-    int32_t scale = int32_t(256.f * std::max((1.f - smoothed_progress) / (1.f - this->last_transition_progress_), 0.f));
-    for (auto led : this->light_) {
-      led.set_rgbw(subtract_scaled_difference(this->target_color_.red, led.get_red(), scale),
-                   subtract_scaled_difference(this->target_color_.green, led.get_green(), scale),
-                   subtract_scaled_difference(this->target_color_.blue, led.get_blue(), scale),
-                   subtract_scaled_difference(this->target_color_.white, led.get_white(), scale));
+    if (this->uniform_start_color_.has_value()) {
+      // All LEDs started at the same color: compute the interpolated value once and write it to
+      // every LED. No read-back, so each LED's stored byte advances through every gamma threshold
+      // as smoothed_progress crosses it, instead of stalling at 0 for low pre-gamma values.
+      //
+      // Trade-off: any mid-transition writes to individual LEDs (e.g. from a user lambda) will be
+      // overwritten on the next apply() here. The fallback path below would have respected them
+      // via its read-back. Concurrent per-LED mutation during a transition isn't a pattern we
+      // support, so this is acceptable.
+      // lerp(start, target, progress) via existing helper: target - (target-start)*(1-progress).
+      const Color &start = *this->uniform_start_color_;
+      int32_t remaining = int32_t(256.f * (1.f - smoothed_progress));
+      uint8_t r = subtract_scaled_difference(this->target_color_.red, start.red, remaining);
+      uint8_t g = subtract_scaled_difference(this->target_color_.green, start.green, remaining);
+      uint8_t b = subtract_scaled_difference(this->target_color_.blue, start.blue, remaining);
+      uint8_t w = subtract_scaled_difference(this->target_color_.white, start.white, remaining);
+      for (auto led : this->light_) {
+        led.set_rgbw(r, g, b, w);
+      }
+    } else {
+      int32_t scale =
+          int32_t(256.f * std::max((1.f - smoothed_progress) / (1.f - this->last_transition_progress_), 0.f));
+      for (auto led : this->light_) {
+        led.set_rgbw(subtract_scaled_difference(this->target_color_.red, led.get_red(), scale),
+                     subtract_scaled_difference(this->target_color_.green, led.get_green(), scale),
+                     subtract_scaled_difference(this->target_color_.blue, led.get_blue(), scale),
+                     subtract_scaled_difference(this->target_color_.white, led.get_white(), scale));
+      }
     }
     this->last_transition_progress_ = smoothed_progress;
     this->light_.schedule_show();
diff --git a/esphome/components/light/addressable_light.h b/esphome/components/light/addressable_light.h
index 17cdb7d6f6..c4eabbad2e 100644
--- a/esphome/components/light/addressable_light.h
+++ b/esphome/components/light/addressable_light.h
@@ -115,6 +115,7 @@ class AddressableLightTransformer : public LightTransformer {
   AddressableLight &light_;
   float last_transition_progress_{0.0f};
   Color target_color_{};
+  optional<Color> uniform_start_color_{};
 };
 
 }  // namespace esphome::light
diff --git a/tests/integration/fixtures/addressable_light_transition.yaml b/tests/integration/fixtures/addressable_light_transition.yaml
new file mode 100644
index 0000000000..7b847dd803
--- /dev/null
+++ b/tests/integration/fixtures/addressable_light_transition.yaml
@@ -0,0 +1,29 @@
+esphome:
+  name: addr-light-transition
+host:
+api:
+logger:
+  level: DEBUG
+
+external_components:
+  - source:
+      type: local
+      path: EXTERNAL_COMPONENT_PATH
+
+light:
+  - platform: mock_addressable_light
+    output_id: strip_output
+    id: strip
+    name: "Test Strip"
+    num_leds: 4
+    gamma_correct: 2.8
+    default_transition_length: 0s
+
+sensor:
+  - platform: template
+    name: "led0_red_raw"
+    id: led0_red_raw
+    update_interval: 10ms
+    accuracy_decimals: 0
+    lambda: |-
+      return (float) id(strip_output).get_raw_red(0);
diff --git a/tests/integration/fixtures/external_components/mock_addressable_light/__init__.py b/tests/integration/fixtures/external_components/mock_addressable_light/__init__.py
new file mode 100644
index 0000000000..e8cfff8e1f
--- /dev/null
+++ b/tests/integration/fixtures/external_components/mock_addressable_light/__init__.py
@@ -0,0 +1 @@
+CODEOWNERS = ["@esphome/tests"]
diff --git a/tests/integration/fixtures/external_components/mock_addressable_light/light.py b/tests/integration/fixtures/external_components/mock_addressable_light/light.py
new file mode 100644
index 0000000000..293d2854f4
--- /dev/null
+++ b/tests/integration/fixtures/external_components/mock_addressable_light/light.py
@@ -0,0 +1,23 @@
+import esphome.codegen as cg
+from esphome.components import light
+import esphome.config_validation as cv
+from esphome.const import CONF_NUM_LEDS, CONF_OUTPUT_ID
+from esphome.types import ConfigType
+
+mock_addressable_light_ns = cg.esphome_ns.namespace("mock_addressable_light")
+MockAddressableLight = mock_addressable_light_ns.class_(
+    "MockAddressableLight", light.AddressableLight
+)
+
+CONFIG_SCHEMA = light.ADDRESSABLE_LIGHT_SCHEMA.extend(
+    {
+        cv.GenerateID(CONF_OUTPUT_ID): cv.declare_id(MockAddressableLight),
+        cv.Optional(CONF_NUM_LEDS, default=4): cv.positive_not_null_int,
+    }
+)
+
+
+async def to_code(config: ConfigType) -> None:
+    var = cg.new_Pvariable(config[CONF_OUTPUT_ID], config[CONF_NUM_LEDS])
+    await light.register_light(var, config)
+    await cg.register_component(var, config)
diff --git a/tests/integration/fixtures/external_components/mock_addressable_light/mock_addressable_light.h b/tests/integration/fixtures/external_components/mock_addressable_light/mock_addressable_light.h
new file mode 100644
index 0000000000..c6b0d10601
--- /dev/null
+++ b/tests/integration/fixtures/external_components/mock_addressable_light/mock_addressable_light.h
@@ -0,0 +1,52 @@
+#pragma once
+
+#include <cstddef>
+#include <cstdint>
+#include <memory>
+
+#include "esphome/components/light/addressable_light.h"
+#include "esphome/core/component.h"
+
+namespace esphome::mock_addressable_light {
+
+// In-memory addressable light for host-mode integration tests. Exposes the raw
+// per-LED byte buffer (post-gamma-correction, as the hardware would see it)
+// so tests can observe transition behavior without real hardware.
+class MockAddressableLight : public light::AddressableLight {
+ public:
+  explicit MockAddressableLight(uint16_t num_leds)
+      : num_leds_(num_leds), buf_(new uint8_t[num_leds * 4]()), effect_data_(new uint8_t[num_leds]()) {}
+
+  void setup() override {}
+  void write_state(light::LightState *state) override {}
+  int32_t size() const override { return this->num_leds_; }
+  void clear_effect_data() override {
+    for (uint16_t i = 0; i < this->num_leds_; i++)
+      this->effect_data_[i] = 0;
+  }
+  light::LightTraits get_traits() override {
+    auto traits = light::LightTraits();
+    traits.set_supported_color_modes({light::ColorMode::RGB});
+    return traits;
+  }
+
+  // Accessors for tests: return the raw stored byte (post gamma correction),
+  // which is what actual LED hardware would receive.
+  uint8_t get_raw_red(uint16_t index) const { return this->buf_[index * 4 + 0]; }
+  uint8_t get_raw_green(uint16_t index) const { return this->buf_[index * 4 + 1]; }
+  uint8_t get_raw_blue(uint16_t index) const { return this->buf_[index * 4 + 2]; }
+  uint8_t get_raw_white(uint16_t index) const { return this->buf_[index * 4 + 3]; }
+
+ protected:
+  light::ESPColorView get_view_internal(int32_t index) const override {
+    size_t pos = index * 4;
+    return {this->buf_.get() + pos + 0, this->buf_.get() + pos + 1,       this->buf_.get() + pos + 2,
+            this->buf_.get() + pos + 3, this->effect_data_.get() + index, &this->correction_};
+  }
+
+  uint16_t num_leds_;
+  std::unique_ptr<uint8_t[]> buf_;
+  std::unique_ptr<uint8_t[]> effect_data_;
+};
+
+}  // namespace esphome::mock_addressable_light
diff --git a/tests/integration/test_addressable_light_transition.py b/tests/integration/test_addressable_light_transition.py
new file mode 100644
index 0000000000..3f99c87766
--- /dev/null
+++ b/tests/integration/test_addressable_light_transition.py
@@ -0,0 +1,114 @@
+"""Integration test for addressable light transitions with gamma correction.
+
+Regression test for a bug where a long turn-on transition on an addressable
+light with gamma correction (e.g. gamma_correct: 2.8) produced no visible
+output for ~90% of the transition duration, then jumped to the target in the
+final ~10%. Root cause: the transition algorithm read each LED's current value
+back through the 8-bit stored byte every step; at gamma 2.8 any pre-gamma value
+below ~27 rounds to stored byte 0, so the stored byte stalled at 0 until
+progress was high enough for a single step to produce a large-enough pre-gamma
+value to clear the gamma threshold.
+
+The fix interpolates against a cached start color when all LEDs started at the
+same value (the common case for plain turn_on/turn_off), avoiding the round-trip.
+
+This test uses a host-only mock addressable light that exposes the raw stored
+byte of each LED, so we can observe the transition directly.
+"""
+
+from __future__ import annotations
+
+import asyncio
+
+from aioesphomeapi import LightInfo, SensorInfo, SensorState
+import pytest
+
+from .state_utils import InitialStateHelper, require_entity
+from .types import APIClientConnectedFactory, RunCompiledFunction
+
+
+@pytest.mark.asyncio
+async def test_addressable_light_transition(
+    yaml_config: str,
+    run_compiled: RunCompiledFunction,
+    api_client_connected: APIClientConnectedFactory,
+) -> None:
+    """With gamma 2.8, the stored raw byte must rise visibly well before the end."""
+    async with run_compiled(yaml_config), api_client_connected() as client:
+        entities, _ = await client.list_entities_services()
+        light = require_entity(entities, "test_strip", LightInfo)
+        sensor = require_entity(entities, "led0_red_raw", SensorInfo)
+
+        # Track the raw-byte sensor. It polls every 10ms in the fixture, and
+        # ESPHome sensors publish on every change, so we collect a time series.
+        # Samples are stored as (seconds_since_command_issue, value). Times
+        # before the command was issued are negative.
+        loop = asyncio.get_running_loop()
+        samples: list[tuple[float, float]] = []
+        command_time: float | None = None
+
+        def on_state(state: object) -> None:
+            if not isinstance(state, SensorState) or state.key != sensor.key:
+                return
+            now = loop.time()
+            # If the command hasn't been issued yet, use 0 as the origin;
+            # those samples get negative times and are excluded below.
+            origin = command_time if command_time is not None else now
+            samples.append((now - origin, state.state))
+
+        # InitialStateHelper swallows the first state ESPHome sends per entity
+        # on subscribe, so on_state only sees real post-subscribe updates.
+        initial_state_helper = InitialStateHelper(entities)
+        client.subscribe_states(initial_state_helper.on_state_wrapper(on_state))
+        await initial_state_helper.wait_for_initial_states()
+
+        # Start transition: off -> full white over 1 second. This is the
+        # scenario from the bug report, compressed in time.
+        transition_s = 1.0
+        command_time = loop.time()
+        client.light_command(
+            key=light.key,
+            state=True,
+            rgb=(1.0, 1.0, 1.0),
+            brightness=1.0,
+            transition_length=transition_s,
+        )
+
+        # Let the full transition run, plus margin for the final sample.
+        await asyncio.sleep(transition_s + 0.2)
+
+        # Only look at samples that arrived after the command was issued.
+        post_command = [(t, v) for (t, v) in samples if t >= 0]
+        assert post_command, "no sensor samples received after command was issued"
+
+        # Assertion 1: the transition is not stalled. With the bug, the raw
+        # byte stays at 0 until ~90% of the transition duration. With the fix,
+        # it becomes nonzero in the first ~30% (for gamma 2.8, pre-gamma 76
+        # clears the gamma threshold at progress ~0.30). Require the first
+        # nonzero sample to land well before 70% of the transition duration,
+        # measured from the command-issue time.
+        first_nonzero = next(((t, v) for (t, v) in post_command if v > 0), None)
+        assert first_nonzero is not None, (
+            "raw byte never rose above 0 during the transition — the fade stalled"
+        )
+        assert first_nonzero[0] < transition_s * 0.7, (
+            f"raw byte only rose above 0 at t={first_nonzero[0]:.3f}s "
+            f"(>{transition_s * 0.7:.3f}s after command) — transition is stalling"
+        )
+
+        # Assertion 2: by 70% of the transition duration after the command,
+        # the raw byte should have reached a substantial fraction of its final
+        # value. This catches "barely moves then jumps at the end" regressions
+        # that pass assertion 1 but still stall most of the range.
+        late_samples = [v for (t, v) in post_command if t >= transition_s * 0.7]
+        assert late_samples, "no samples captured late in transition"
+        assert max(late_samples) >= 100, (
+            f"raw byte peaked at only {max(late_samples)} at/after 70% of "
+            "transition (expected >= 100 for white target at gamma 2.8)"
+        )
+
+        # Assertion 3: final value reaches target. Gamma 2.8 of 255 is 255.
+        final_samples = [v for (_, v) in post_command[-5:]]
+        assert max(final_samples) >= 250, (
+            f"final raw byte was {max(final_samples)}, expected >= 250"
+        )