diff --git a/esphome/components/audio/audio_transfer_buffer.cpp b/esphome/components/audio/audio_transfer_buffer.cpp
index 790cd62db0..ddb669e0eb 100644
--- a/esphome/components/audio/audio_transfer_buffer.cpp
+++ b/esphome/components/audio/audio_transfer_buffer.cpp
@@ -2,6 +2,8 @@
 
 #ifdef USE_ESP32
 
+#include <cstring>
+
 #include "esphome/core/helpers.h"
 
 namespace esphome {
@@ -75,12 +77,32 @@ bool AudioTransferBuffer::has_buffered_data() const {
 }
 
 bool AudioTransferBuffer::reallocate(size_t new_buffer_size) {
-  if (this->buffer_length_ > 0) {
-    // Buffer currently has data, so reallocation is impossible
+  if (this->buffer_ == nullptr) {
+    return this->allocate_buffer_(new_buffer_size);
+  }
+
+  if (new_buffer_size < this->buffer_length_) {
+    // New size is too small to hold existing data
     return false;
   }
-  this->deallocate_buffer_();
-  return this->allocate_buffer_(new_buffer_size);
+
+  // Shift existing data to the start of the buffer so realloc preserves it
+  if ((this->buffer_length_ > 0) && (this->data_start_ != this->buffer_)) {
+    std::memmove(this->buffer_, this->data_start_, this->buffer_length_);
+    this->data_start_ = this->buffer_;
+  }
+
+  RAMAllocator<uint8_t> allocator;
+  uint8_t *new_buffer = allocator.reallocate(this->buffer_, new_buffer_size);
+  if (new_buffer == nullptr) {
+    // Reallocation failed, but the original buffer is still valid
+    return false;
+  }
+
+  this->buffer_ = new_buffer;
+  this->data_start_ = this->buffer_;
+  this->buffer_size_ = new_buffer_size;
+  return true;
 }
 
 bool AudioTransferBuffer::allocate_buffer_(size_t buffer_size) {
@@ -115,7 +137,7 @@ size_t AudioSourceTransferBuffer::transfer_data_from_source(TickType_t ticks_to_
   if (pre_shift) {
     // Shift data in buffer to start
     if (this->buffer_length_ > 0) {
-      memmove(this->buffer_, this->data_start_, this->buffer_length_);
+      std::memmove(this->buffer_, this->data_start_, this->buffer_length_);
     }
     this->data_start_ = this->buffer_;
   }
@@ -150,7 +172,7 @@ size_t AudioSinkTransferBuffer::transfer_data_to_sink(TickType_t ticks_to_wait,
 
   if (post_shift) {
     // Shift unwritten data to the start of the buffer
-    memmove(this->buffer_, this->data_start_, this->buffer_length_);
+    std::memmove(this->buffer_, this->data_start_, this->buffer_length_);
     this->data_start_ = this->buffer_;
   }
 
diff --git a/esphome/components/audio/audio_transfer_buffer.h b/esphome/components/audio/audio_transfer_buffer.h
index edb484e7d2..24c0670d1a 100644
--- a/esphome/components/audio/audio_transfer_buffer.h
+++ b/esphome/components/audio/audio_transfer_buffer.h
@@ -56,6 +56,9 @@ class AudioTransferBuffer {
   /// @return True if there is data, false otherwise.
   virtual bool has_buffered_data() const;
 
+  /// @brief Reallocates the transfer buffer, preserving any existing data.
+  /// @param new_buffer_size The new size in bytes. Must be at least as large as available().
+  /// @return True if successful, false otherwise. On failure, the original buffer remains valid.
   bool reallocate(size_t new_buffer_size);
 
  protected:
diff --git a/esphome/components/combination/combination.cpp b/esphome/components/combination/combination.cpp
index 716d270390..ece7cca482 100644
--- a/esphome/components/combination/combination.cpp
+++ b/esphome/components/combination/combination.cpp
@@ -126,7 +126,7 @@ void LinearCombinationComponent::setup() {
 }
 
 void LinearCombinationComponent::handle_new_value(float value) {
-  // Multiplies each sensor state by a configured coeffecient and then sums
+  // Multiplies each sensor state by a configured coefficient and then sums
 
   if (!std::isfinite(value))
     return;
diff --git a/esphome/components/combination/sensor.py b/esphome/components/combination/sensor.py
index f5255fec03..0204162e8d 100644
--- a/esphome/components/combination/sensor.py
+++ b/esphome/components/combination/sensor.py
@@ -1,3 +1,5 @@
+import logging
+
 import esphome.codegen as cg
 from esphome.components import sensor
 import esphome.config_validation as cv
@@ -15,6 +17,8 @@ from esphome.const import (
 )
 from esphome.core.entity_helpers import inherit_property_from
 
+_LOGGER = logging.getLogger(__name__)
+
 CODEOWNERS = ["@Cat-Ion", "@kahrendt"]
 
 combination_ns = cg.esphome_ns.namespace("combination")
@@ -47,7 +51,8 @@ SumCombinationComponent = combination_ns.class_(
     "SumCombinationComponent", cg.Component, sensor.Sensor
 )
 
-CONF_COEFFECIENT = "coeffecient"
+CONF_COEFFICIENT = "coefficient"
+CONF_COEFFECIENT = "coeffecient"  # Deprecated, remove before 2026.12.0
 CONF_ERROR = "error"
 CONF_KALMAN = "kalman"
 CONF_LINEAR = "linear"
@@ -68,11 +73,34 @@ KALMAN_SOURCE_SCHEMA = cv.Schema(
     }
 )
 
-LINEAR_SOURCE_SCHEMA = cv.Schema(
-    {
-        cv.Required(CONF_SOURCE): cv.use_id(sensor.Sensor),
-        cv.Required(CONF_COEFFECIENT): cv.templatable(cv.float_),
-    }
+
+def _migrate_coeffecient(config):
+    """Migrate deprecated 'coeffecient' spelling to 'coefficient'."""
+    if CONF_COEFFECIENT in config:
+        if CONF_COEFFICIENT in config:
+            raise cv.Invalid(
+                f"Cannot specify both '{CONF_COEFFICIENT}' and '{CONF_COEFFECIENT}'"
+            )
+        _LOGGER.warning(
+            "'%s' is deprecated, use '%s' instead. Will be removed in 2026.12.0",
+            CONF_COEFFECIENT,
+            CONF_COEFFICIENT,
+        )
+        config[CONF_COEFFICIENT] = config.pop(CONF_COEFFECIENT)
+    elif CONF_COEFFICIENT not in config:
+        raise cv.Invalid(f"'{CONF_COEFFICIENT}' is a required option")
+    return config
+
+
+LINEAR_SOURCE_SCHEMA = cv.All(
+    cv.Schema(
+        {
+            cv.Required(CONF_SOURCE): cv.use_id(sensor.Sensor),
+            cv.Optional(CONF_COEFFICIENT): cv.templatable(cv.float_),
+            cv.Optional(CONF_COEFFECIENT): cv.templatable(cv.float_),
+        }
+    ),
+    _migrate_coeffecient,
 )
 
 SENSOR_ONLY_SOURCE_SCHEMA = cv.Schema(
@@ -162,12 +190,12 @@ async def to_code(config):
             )
             cg.add(var.add_source(source, error))
         elif config[CONF_TYPE] == CONF_LINEAR:
-            coeffecient = await cg.templatable(
-                source_conf[CONF_COEFFECIENT],
+            coefficient = await cg.templatable(
+                source_conf[CONF_COEFFICIENT],
                 [(float, "x")],
                 cg.float_,
             )
-            cg.add(var.add_source(source, coeffecient))
+            cg.add(var.add_source(source, coefficient))
         else:
             cg.add(var.add_source(source))
 
diff --git a/esphome/components/epaper_spi/display.py b/esphome/components/epaper_spi/display.py
index 13f66691b2..2657071f45 100644
--- a/esphome/components/epaper_spi/display.py
+++ b/esphome/components/epaper_spi/display.py
@@ -49,10 +49,6 @@ EPaperBase = epaper_spi_ns.class_(
 )
 Transform = epaper_spi_ns.enum("Transform")
 
-EPaperSpectraE6 = epaper_spi_ns.class_("EPaperSpectraE6", EPaperBase)
-EPaper7p3InSpectraE6 = epaper_spi_ns.class_("EPaper7p3InSpectraE6", EPaperSpectraE6)
-
-
 # Import all models dynamically from the models package
 for module_info in pkgutil.iter_modules(models.__path__):
     importlib.import_module(f".models.{module_info.name}", package=__package__)
diff --git a/esphome/components/epaper_spi/epaper_weact_3c.cpp b/esphome/components/epaper_spi/epaper_weact_3c.cpp
new file mode 100644
index 0000000000..bd83105dd7
--- /dev/null
+++ b/esphome/components/epaper_spi/epaper_weact_3c.cpp
@@ -0,0 +1,231 @@
+#include "epaper_weact_3c.h"
+#include "esphome/core/log.h"
+
+namespace esphome::epaper_spi {
+
+static constexpr const char *const TAG = "epaper_weact_3c";
+
+// SSD1680 3-color display notes:
+// - Buffer uses 1 bit per pixel, 8 pixels per byte
+// - Buffer first half (black_offset): Black/White plane (1=black, 0=white)
+// - Buffer second half (red_offset): Red plane (1=red, 0=no red)
+// - Total buffer: width * height / 4 bytes = 2 * (width * height / 8)
+// - For 128x296: 128*296/4 = 9472 bytes total (4736 per color)
+
+void EPaperWeAct3C::draw_pixel_at(int x, int y, Color color) {
+  if (!this->rotate_coordinates_(x, y))
+    return;
+
+  // Calculate position in the 1-bit buffer
+  const uint32_t pos = (x / 8) + (y * this->row_width_);
+  const uint8_t bit = 0x80 >> (x & 0x07);
+  const uint32_t red_offset = this->buffer_length_ / 2u;
+
+  // Use luminance threshold for B/W mapping
+  // Split at halfway point (382 = (255*3)/2)
+  bool is_white = (static_cast<int>(color.r) + color.g + color.b) > 382;
+
+  // Update black/white plane (first half of buffer)
+  if (is_white) {
+    // White pixel - clear bit in black plane
+    this->buffer_[pos] &= ~bit;
+  } else {
+    // Black pixel - set bit in black plane
+    this->buffer_[pos] |= bit;
+  }
+
+  // Update red plane (second half of buffer)
+  // Red if red component is dominant (r > g+b)
+  if (color.r > color.g + color.b) {
+    // Red pixel - set bit in red plane
+    this->buffer_[red_offset + pos] |= bit;
+  } else {
+    // Not red - clear bit in red plane
+    this->buffer_[red_offset + pos] &= ~bit;
+  }
+}
+
+void EPaperWeAct3C::fill(Color color) {
+  // For 3-color e-paper with 1-bit buffer format:
+  // - Black buffer: 1=black, 0=white
+  // - Red buffer: 1=red, 0=no red
+  // The buffer is stored as two halves: [black plane][red plane]
+  const size_t half_buffer = this->buffer_length_ / 2u;
+
+  // Use luminance threshold for B/W mapping
+  bool is_white = (static_cast<int>(color.r) + color.g + color.b) > 382;
+  bool is_red = color.r > color.g + color.b;
+
+  // Fill both planes
+  if (is_white) {
+    // White - both planes = 0x00
+    this->buffer_.fill(0x00);
+  } else if (is_red) {
+    // Red - black plane = 0x00, red plane = 0xFF
+    for (size_t i = 0; i < half_buffer; i++)
+      this->buffer_[i] = 0x00;
+    for (size_t i = 0; i < half_buffer; i++)
+      this->buffer_[half_buffer + i] = 0xFF;
+  } else {
+    // Black - black plane = 0xFF, red plane = 0x00
+    for (size_t i = 0; i < half_buffer; i++)
+      this->buffer_[i] = 0xFF;
+    for (size_t i = 0; i < half_buffer; i++)
+      this->buffer_[half_buffer + i] = 0x00;
+  }
+}
+
+void EPaperWeAct3C::clear() {
+  // Clear buffer to white, just like real paper.
+  this->fill(COLOR_ON);
+}
+
+void EPaperWeAct3C::set_window_() {
+  // For full screen refresh, we always start from (0,0)
+  // The y_low_/y_high_ values track the dirty region for optimization,
+  // but for display refresh we need to write from the beginning
+  uint16_t x_start = 0;
+  uint16_t x_end = this->width_ - 1;
+  uint16_t y_start = 0;
+  uint16_t y_end = this->height_ - 1;  // height = 296 for 2.9" display
+
+  // Set RAM X address boundaries (0x44)
+  // X coordinates are byte-aligned (divided by 8)
+  this->cmd_data(0x44, {(uint8_t) (x_start / 8), (uint8_t) (x_end / 8)});
+
+  // Set RAM Y address boundaries (0x45)
+  // Format: Y start (LSB, MSB), Y end (LSB, MSB)
+  this->cmd_data(0x45, {(uint8_t) y_start, (uint8_t) (y_start >> 8), (uint8_t) (y_end & 0xFF), (uint8_t) (y_end >> 8)});
+
+  // Reset RAM X counter to start (0x4E) - 1 byte
+  this->cmd_data(0x4E, {(uint8_t) (x_start / 8)});
+
+  // Reset RAM Y counter to start (0x4F) - 2 bytes (LSB, MSB)
+  this->cmd_data(0x4F, {(uint8_t) y_start, (uint8_t) (y_start >> 8)});
+}
+
+bool HOT EPaperWeAct3C::transfer_data() {
+  const uint32_t start_time = millis();
+  const size_t buffer_length = this->buffer_length_;
+  const size_t half_buffer = buffer_length / 2u;
+
+  ESP_LOGV(TAG, "transfer_data: buffer_length=%u, half_buffer=%u", buffer_length, half_buffer);
+
+  // Use a local buffer for SPI transfers
+  static constexpr size_t MAX_TRANSFER_SIZE = 128;
+  uint8_t bytes_to_send[MAX_TRANSFER_SIZE];
+
+  // First, send the RED buffer (0x26 = WRITE_COLOR)
+  // The red plane is in the second half of our buffer
+  // NOTE: Must set RAM window first to reset address counters!
+  if (this->current_data_index_ < half_buffer) {
+    if (this->current_data_index_ == 0) {
+      ESP_LOGV(TAG, "transfer_data: sending RED buffer (0x26)");
+      this->set_window_();  // Reset RAM X/Y counters to start position
+      this->command(0x26);
+    }
+
+    this->start_data_();
+    size_t red_offset = half_buffer;
+    while (this->current_data_index_ < half_buffer) {
+      size_t bytes_to_copy = std::min(MAX_TRANSFER_SIZE, half_buffer - this->current_data_index_);
+
+      for (size_t i = 0; i < bytes_to_copy; i++) {
+        bytes_to_send[i] = this->buffer_[red_offset + this->current_data_index_ + i];
+      }
+
+      this->write_array(bytes_to_send, bytes_to_copy);
+
+      this->current_data_index_ += bytes_to_copy;
+
+      if (millis() - start_time > MAX_TRANSFER_TIME) {
+        // Let the main loop run and come back next loop
+        this->disable();
+        return false;
+      }
+    }
+    this->disable();
+  }
+
+  // Finished the red buffer, now send the BLACK buffer (0x24 = WRITE_BLACK)
+  // The black plane is in the first half of our buffer
+  if (this->current_data_index_ < buffer_length) {
+    if (this->current_data_index_ == half_buffer) {
+      ESP_LOGV(TAG, "transfer_data: finished red buffer, sending BLACK buffer (0x24)");
+
+      // Do NOT reset RAM counters here for WeAct displays (Reference implementation behavior)
+      // this->set_window();
+      this->command(0x24);
+      // Continue using current_data_index_, but we need to map it to the start of the buffer
+    }
+
+    this->start_data_();
+    while (this->current_data_index_ < buffer_length) {
+      size_t remaining = buffer_length - this->current_data_index_;
+      size_t bytes_to_copy = std::min(MAX_TRANSFER_SIZE, remaining);
+
+      // Calculate offset into the BLACK buffer (which is at the start of this->buffer_)
+      // current_data_index_ goes from half_buffer to buffer_length
+      size_t buffer_offset = this->current_data_index_ - half_buffer;
+
+      for (size_t i = 0; i < bytes_to_copy; i++) {
+        bytes_to_send[i] = this->buffer_[buffer_offset + i];
+      }
+
+      this->write_array(bytes_to_send, bytes_to_copy);
+
+      this->current_data_index_ += bytes_to_copy;
+
+      if (millis() - start_time > MAX_TRANSFER_TIME) {
+        // Let the main loop run and come back next loop
+        this->disable();
+        return false;
+      }
+    }
+    this->disable();
+  }
+
+  this->current_data_index_ = 0;
+  ESP_LOGV(TAG, "transfer_data: completed (red=%u, black=%u bytes)", half_buffer, half_buffer);
+  return true;
+}
+
+void EPaperWeAct3C::refresh_screen(bool partial) {
+  // SSD1680 refresh sequence:
+  // Reset RAM X/Y address counters to 0,0 so display reads from start
+  // 0x4E: RAM X counter - 1 byte (X / 8)
+  // 0x4F: RAM Y counter - 2 bytes (Y LSB, Y MSB)
+  this->cmd_data(0x4E, {0x00});        // RAM X counter = 0 (1 byte)
+  this->cmd_data(0x4F, {0x00, 0x00});  // RAM Y counter = 0 (2 bytes)
+
+  // Send UPDATE_FULL command (0x22) with display update control parameter
+  // Both WeAct and waveshare reference use 0xF7: {0x22, 0xF7}
+  // 0xF7 = Display update: Load temperature, Load LUT, Enable RAM content
+  this->cmd_data(0x22, {0xF7});  // Command 0x22 with parameter 0xF7
+  this->command(0x20);           // Activate display update
+
+  // COMMAND TERMINATE FRAME READ WRITE (required by SSD1680)
+  // Removed 0xFF based on working reference implementation
+  // this->command(0xFF);
+}
+
+void EPaperWeAct3C::power_on() {
+  // Power on sequence - send command to turn on power
+  // According to SSD1680 spec: 0x22, 0xF8 powers on the display
+  this->cmd_data(0x22, {0xF8});  // Power on
+  this->command(0x20);           // Activate
+}
+
+void EPaperWeAct3C::power_off() {
+  // Power off sequence - send command to turn off power
+  // According to SSD1680 spec: 0x22, 0x83 powers off the display
+  this->cmd_data(0x22, {0x83});  // Power off
+  this->command(0x20);           // Activate
+}
+
+void EPaperWeAct3C::deep_sleep() {
+  // Deep sleep sequence
+  this->cmd_data(0x10, {0x01});  // Deep sleep mode
+}
+
+}  // namespace esphome::epaper_spi
diff --git a/esphome/components/epaper_spi/epaper_weact_3c.h b/esphome/components/epaper_spi/epaper_weact_3c.h
new file mode 100644
index 0000000000..2df6f1ba09
--- /dev/null
+++ b/esphome/components/epaper_spi/epaper_weact_3c.h
@@ -0,0 +1,39 @@
+#pragma once
+
+#include "epaper_spi.h"
+
+namespace esphome::epaper_spi {
+
+/**
+ * WeAct 3-color e-paper displays (SSD1683 controller).
+ * Supports multiple sizes: 2.9" (128x296), 4.2" (400x300), etc.
+ *
+ * Color scheme: Black, White, Red (BWR)
+ * Buffer layout: 1 bit per pixel, separate planes
+ * - Buffer first half: Black/White plane (1=black, 0=white)
+ * - Buffer second half: Red plane (1=red, 0=no red)
+ * - Total buffer: width * height / 4 bytes (2 * width * height / 8)
+ */
+class EPaperWeAct3C : public EPaperBase {
+ public:
+  EPaperWeAct3C(const char *name, uint16_t width, uint16_t height, const uint8_t *init_sequence,
+                size_t init_sequence_length)
+      : EPaperBase(name, width, height, init_sequence, init_sequence_length, DISPLAY_TYPE_BINARY) {
+    this->buffer_length_ = this->row_width_ * height * 2;
+  }
+
+  void fill(Color color) override;
+  void clear() override;
+
+ protected:
+  void set_window_();
+  void refresh_screen(bool partial) override;
+  void power_on() override;
+  void power_off() override;
+  void deep_sleep() override;
+  void draw_pixel_at(int x, int y, Color color) override;
+
+  bool transfer_data() override;
+};
+
+}  // namespace esphome::epaper_spi
diff --git a/esphome/components/epaper_spi/models/jd79660.py b/esphome/components/epaper_spi/models/jd79660.py
index 2d8830ebd2..a0457c5812 100644
--- a/esphome/components/epaper_spi/models/jd79660.py
+++ b/esphome/components/epaper_spi/models/jd79660.py
@@ -84,3 +84,35 @@ jd79660.extend(
         (0xA5, 0x00,),
     ),
 )
+
+# Waveshare 7.5-H
+#
+# Vendor init derived from vendor sample code
+# <https://github.com/waveshareteam/e-Paper/blob/master/E-paper_Separate_Program/7in5_e-Paper_H/ESP32/EPD_7in5h.cpp>
+# Compatible MIT license, see esphome/LICENSE file.
+#
+# Note: busy pin uses LOW=busy, HIGH=idle. Configure with inverted: true in YAML.
+#
+# fmt: off
+jd79660.extend(
+    "Waveshare-7.5in-H",
+    width=800,
+    height=480,
+
+    initsequence=(
+        (0x00, 0x0F, 0x29,),
+        (0x06, 0x0F, 0x8B, 0x93, 0xA1,),
+        (0x41, 0x00,),
+        (0x50, 0x37,),
+        (0x60, 0x02, 0x02,),
+        (0x61, 800 // 256, 800 % 256, 480 // 256, 480 % 256,),  # RES: 800x480
+        (0x62, 0x98, 0x98, 0x98, 0x75, 0xCA, 0xB2, 0x98, 0x7E,),
+        (0x65, 0x00, 0x00, 0x00, 0x00,),
+        (0xE7, 0x1C,),
+        (0xE3, 0x00,),
+        (0xE9, 0x01,),
+        (0x30, 0x08,),
+        # Power On (0x04): Must be early part of init seq = Disabled later!
+        (0x04,),
+    ),
+)
diff --git a/esphome/components/epaper_spi/models/weact_bwr.py b/esphome/components/epaper_spi/models/weact_bwr.py
new file mode 100644
index 0000000000..21a015b08d
--- /dev/null
+++ b/esphome/components/epaper_spi/models/weact_bwr.py
@@ -0,0 +1,75 @@
+"""WeAct Black/White/Red e-paper displays using SSD1683 controller.
+
+Supported models:
+- weact-2.13in-3c: 122x250 pixels (2.13" display)
+- weact-2.9in-3c: 128x296 pixels (2.9" display)
+- weact-4.2in-3c: 400x300 pixels (4.2" display)
+
+These displays use SSD1680 or SSD1683 controller and require a specific initialization
+sequence. The DRV_OUT_CTL command is calculated from the display height.
+"""
+
+from . import EpaperModel
+
+
+class WeActBWR(EpaperModel):
+    """Base EpaperModel class for WeAct Black/White/Red displays using SSD1683 controller."""
+
+    def __init__(self, name, **defaults):
+        super().__init__(name, "EPaperWeAct3C", **defaults)
+
+    def get_init_sequence(self, config):
+        """Generate initialization sequence for WeAct BWR displays.
+
+        The initialization sequence is based on SSD1680 and SSD1683 controller datasheet
+        and the WeAct display specifications.
+        """
+        _, height = self.get_dimensions(config)
+        # DRV_OUT_CTL: MSB of (height-1), LSB of (height-1), gate setting (0x00)
+        height_minus_1 = height - 1
+        msb = height_minus_1 >> 8
+        lsb = height_minus_1 & 0xFF
+        return (
+            # Step 1: Software Reset (0x12) - REQUIRED per SSD1680, but works without it as well, so it's commented out for now
+            # (0x12,),
+            # Step 2: Wait 10ms after SWRESET (?) not sure how to implement wht waiting for 10ms after SWRESET, so it's commented out for now
+            # Step 3: DRV_OUT_CTL - driver output control (height-dependent)
+            # Format: (command, LSB, MSB, gate setting)
+            (0x01, lsb, msb, 0x00),
+            # Step 4: DATA_ENTRY - data entry mode (0x03 = decrement Y, increment X)
+            (0x11, 0x03),
+            # Step 5: BORDER_FULL - border waveform control
+            (0x3C, 0x05),
+            # Step 6: TEMP_SENS - internal temperature sensor
+            (0x18, 0x80),
+            # Step 7: DISPLAY_UPDATE - display update control
+            (0x21, 0x00, 0x80),
+        )
+
+
+# Model: WeAct 2.9" 3C - 128x296 pixels, SSD1680 controller
+weact_2p9in3c = WeActBWR(
+    "weact-2.9in-3c",
+    width=128,
+    height=296,
+    data_rate="10MHz",
+    minimum_update_interval="1s",
+)
+
+# Model: WeAct 2.13" 3C - 122x250 pixels, SSD1680 controller
+weact_2p13in3c = WeActBWR(
+    "weact-2.13in-3c",
+    width=122,
+    height=250,
+    data_rate="10MHz",
+    minimum_update_interval="1s",
+)
+
+# Model: WeAct 4.2" 3C - 400x300 pixels, SSD1683 controller
+weact_4p2in3c = WeActBWR(
+    "weact-4.2in-3c",
+    width=400,
+    height=300,
+    data_rate="10MHz",
+    minimum_update_interval="10s",
+)
diff --git a/esphome/components/esp32_rmt/__init__.py b/esphome/components/esp32_rmt/__init__.py
index 272c7c81ba..1076bcabdc 100644
--- a/esphome/components/esp32_rmt/__init__.py
+++ b/esphome/components/esp32_rmt/__init__.py
@@ -1,8 +1,30 @@
 from esphome.components import esp32
 import esphome.config_validation as cv
+from esphome.core import CORE
 
 CODEOWNERS = ["@jesserockz"]
 
+VARIANTS_NO_RMT = {esp32.VARIANT_ESP32C2, esp32.VARIANT_ESP32C61}
+
+
+def validate_rmt_not_supported(rmt_only_keys):
+    """Validate that RMT-only config keys are not used on variants without RMT hardware."""
+    rmt_only_keys = set(rmt_only_keys)
+
+    def _validator(config):
+        if CORE.is_esp32:
+            variant = esp32.get_esp32_variant()
+            if variant in VARIANTS_NO_RMT:
+                unsupported = rmt_only_keys.intersection(config)
+                if unsupported:
+                    keys = ", ".join(sorted(f"'{k}'" for k in unsupported))
+                    raise cv.Invalid(
+                        f"{keys} not available on {variant} (no RMT hardware)"
+                    )
+        return config
+
+    return _validator
+
 
 def validate_clock_resolution():
     def _validator(value):
diff --git a/esphome/components/esp32_rmt_led_strip/light.py b/esphome/components/esp32_rmt_led_strip/light.py
index 6d41f6b5b8..1c6943b003 100644
--- a/esphome/components/esp32_rmt_led_strip/light.py
+++ b/esphome/components/esp32_rmt_led_strip/light.py
@@ -3,7 +3,7 @@ import logging
 
 from esphome import pins
 import esphome.codegen as cg
-from esphome.components import esp32, light
+from esphome.components import esp32, esp32_rmt, light
 from esphome.components.const import CONF_USE_PSRAM
 from esphome.components.esp32 import include_builtin_idf_component
 import esphome.config_validation as cv
@@ -71,6 +71,10 @@ CONF_RESET_LOW = "reset_low"
 
 
 CONFIG_SCHEMA = cv.All(
+    esp32.only_on_variant(
+        unsupported=list(esp32_rmt.VARIANTS_NO_RMT),
+        msg_prefix="ESP32 RMT LED strip",
+    ),
     light.ADDRESSABLE_LIGHT_SCHEMA.extend(
         {
             cv.GenerateID(CONF_OUTPUT_ID): cv.declare_id(ESP32RMTLEDStripLightOutput),
diff --git a/esphome/components/fan/fan.cpp b/esphome/components/fan/fan.cpp
index 09ec395841..d744263c76 100644
--- a/esphome/components/fan/fan.cpp
+++ b/esphome/components/fan/fan.cpp
@@ -221,12 +221,17 @@ void Fan::publish_state() {
 }
 
 // Random 32-bit value, change this every time the layout of the FanRestoreState struct changes.
-constexpr uint32_t RESTORE_STATE_VERSION = 0x71700ABA;
+constexpr uint32_t RESTORE_STATE_VERSION = 0x71700ABB;
 optional<FanRestoreState> Fan::restore_state_() {
   FanRestoreState recovered{};
   this->rtc_ = this->make_entity_preference<FanRestoreState>(RESTORE_STATE_VERSION);
   bool restored = this->rtc_.load(&recovered);
 
+  if (!restored) {
+    // No valid saved data; ensure preset_mode sentinel is set
+    recovered.preset_mode = FanRestoreState::NO_PRESET;
+  }
+
   switch (this->restore_mode_) {
     case FanRestoreMode::NO_RESTORE:
       return {};
@@ -264,6 +269,7 @@ void Fan::save_state_() {
   state.oscillating = this->oscillating;
   state.speed = this->speed;
   state.direction = this->direction;
+  state.preset_mode = FanRestoreState::NO_PRESET;
 
   if (this->has_preset_mode()) {
     const auto &preset_modes = traits.supported_preset_modes();
diff --git a/esphome/components/fan/fan.h b/esphome/components/fan/fan.h
index 55d4ba8825..2caf3a712a 100644
--- a/esphome/components/fan/fan.h
+++ b/esphome/components/fan/fan.h
@@ -91,11 +91,13 @@ class FanCall {
 };
 
 struct FanRestoreState {
+  static constexpr uint8_t NO_PRESET = UINT8_MAX;
+
   bool state;
   int speed;
   bool oscillating;
   FanDirection direction;
-  uint8_t preset_mode;
+  uint8_t preset_mode{NO_PRESET};
 
   /// Convert this struct to a fan call that can be performed.
   FanCall to_call(Fan &fan);
diff --git a/esphome/components/hbridge/fan/hbridge_fan.cpp b/esphome/components/hbridge/fan/hbridge_fan.cpp
index 9bf58f9d1e..38e4129e66 100644
--- a/esphome/components/hbridge/fan/hbridge_fan.cpp
+++ b/esphome/components/hbridge/fan/hbridge_fan.cpp
@@ -28,15 +28,15 @@ fan::FanCall HBridgeFan::brake() {
 }
 
 void HBridgeFan::setup() {
+  // Construct traits before restore so preset modes can be looked up by index
+  this->traits_ = fan::FanTraits(this->oscillating_ != nullptr, true, true, this->speed_count_);
+  this->traits_.set_supported_preset_modes(this->preset_modes_);
+
   auto restore = this->restore_state_();
   if (restore.has_value()) {
     restore->apply(*this);
     this->write_state_();
   }
-
-  // Construct traits
-  this->traits_ = fan::FanTraits(this->oscillating_ != nullptr, true, true, this->speed_count_);
-  this->traits_.set_supported_preset_modes(this->preset_modes_);
 }
 
 void HBridgeFan::dump_config() {
diff --git a/esphome/components/remote_base/remote_base.h b/esphome/components/remote_base/remote_base.h
index 0cac28506f..d73fff2b0a 100644
--- a/esphome/components/remote_base/remote_base.h
+++ b/esphome/components/remote_base/remote_base.h
@@ -119,6 +119,8 @@ class RemoteComponentBase {
 };
 
 #ifdef USE_ESP32
+#include <soc/soc_caps.h>
+#if SOC_RMT_SUPPORTED
 class RemoteRMTChannel {
  public:
   void set_clock_resolution(uint32_t clock_resolution) { this->clock_resolution_ = clock_resolution; }
@@ -137,7 +139,8 @@ class RemoteRMTChannel {
   uint32_t clock_resolution_{1000000};
   uint32_t rmt_symbols_;
 };
-#endif
+#endif  // SOC_RMT_SUPPORTED
+#endif  // USE_ESP32
 
 class RemoteTransmitterBase : public RemoteComponentBase {
  public:
diff --git a/esphome/components/remote_receiver/__init__.py b/esphome/components/remote_receiver/__init__.py
index b3dc213c5f..362f6e99db 100644
--- a/esphome/components/remote_receiver/__init__.py
+++ b/esphome/components/remote_receiver/__init__.py
@@ -65,6 +65,8 @@ RemoteReceiverComponent = remote_receiver_ns.class_(
 def validate_config(config):
     if CORE.is_esp32:
         variant = esp32.get_esp32_variant()
+        if variant in esp32_rmt.VARIANTS_NO_RMT:
+            return config
         if variant in (esp32.VARIANT_ESP32, esp32.VARIANT_ESP32S2):
             max_idle = 65535
         else:
@@ -110,6 +112,8 @@ CONFIG_SCHEMA = remote_base.validate_triggers(
             cv.SplitDefault(
                 CONF_BUFFER_SIZE,
                 esp32="10000b",
+                esp32_c2="1000b",
+                esp32_c61="1000b",
                 esp8266="1000b",
                 bk72xx="1000b",
                 ln882x="1000b",
@@ -131,9 +135,11 @@ CONFIG_SCHEMA = remote_base.validate_triggers(
             cv.SplitDefault(
                 CONF_RMT_SYMBOLS,
                 esp32=192,
+                esp32_c2=cv.UNDEFINED,
                 esp32_c3=96,
                 esp32_c5=96,
                 esp32_c6=96,
+                esp32_c61=cv.UNDEFINED,
                 esp32_h2=96,
                 esp32_p4=192,
                 esp32_s2=192,
@@ -145,6 +151,8 @@ CONFIG_SCHEMA = remote_base.validate_triggers(
             cv.SplitDefault(
                 CONF_RECEIVE_SYMBOLS,
                 esp32=192,
+                esp32_c2=cv.UNDEFINED,
+                esp32_c61=cv.UNDEFINED,
             ): cv.All(cv.only_on_esp32, cv.int_range(min=2)),
             cv.Optional(CONF_USE_DMA): cv.All(
                 esp32.only_on_variant(
@@ -152,24 +160,45 @@ CONFIG_SCHEMA = remote_base.validate_triggers(
                 ),
                 cv.boolean,
             ),
-            cv.SplitDefault(CONF_CARRIER_DUTY_PERCENT, esp32=100): cv.All(
+            cv.SplitDefault(
+                CONF_CARRIER_DUTY_PERCENT,
+                esp32=100,
+                esp32_c2=cv.UNDEFINED,
+                esp32_c61=cv.UNDEFINED,
+            ): cv.All(
                 cv.only_on_esp32,
                 cv.percentage_int,
                 cv.Range(min=1, max=100),
             ),
-            cv.SplitDefault(CONF_CARRIER_FREQUENCY, esp32="0Hz"): cv.All(
-                cv.only_on_esp32, cv.frequency, cv.int_
-            ),
+            cv.SplitDefault(
+                CONF_CARRIER_FREQUENCY,
+                esp32="0Hz",
+                esp32_c2=cv.UNDEFINED,
+                esp32_c61=cv.UNDEFINED,
+            ): cv.All(cv.only_on_esp32, cv.frequency, cv.int_),
         }
     )
     .extend(cv.COMPONENT_SCHEMA)
+    .add_extra(
+        esp32_rmt.validate_rmt_not_supported(
+            [
+                CONF_CLOCK_RESOLUTION,
+                CONF_USE_DMA,
+                CONF_RMT_SYMBOLS,
+                CONF_FILTER_SYMBOLS,
+                CONF_RECEIVE_SYMBOLS,
+                CONF_CARRIER_DUTY_PERCENT,
+                CONF_CARRIER_FREQUENCY,
+            ]
+        )
+    )
     .add_extra(validate_config)
 )
 
 
 async def to_code(config):
     pin = await cg.gpio_pin_expression(config[CONF_PIN])
-    if CORE.is_esp32:
+    if CORE.is_esp32 and esp32.get_esp32_variant() not in esp32_rmt.VARIANTS_NO_RMT:
         # Re-enable ESP-IDF's RMT driver (excluded by default to save compile time)
         esp32.include_builtin_idf_component("esp_driver_rmt")
 
@@ -213,6 +242,8 @@ FILTER_SOURCE_FILES = filter_source_files_from_platform(
             PlatformFramework.ESP32_IDF,
         },
         "remote_receiver.cpp": {
+            PlatformFramework.ESP32_ARDUINO,
+            PlatformFramework.ESP32_IDF,
             PlatformFramework.ESP8266_ARDUINO,
             PlatformFramework.BK72XX_ARDUINO,
             PlatformFramework.RTL87XX_ARDUINO,
diff --git a/esphome/components/remote_receiver/remote_receiver.cpp b/esphome/components/remote_receiver/remote_receiver.cpp
index de47457dac..d59ee63695 100644
--- a/esphome/components/remote_receiver/remote_receiver.cpp
+++ b/esphome/components/remote_receiver/remote_receiver.cpp
@@ -3,7 +3,7 @@
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
 
-#if defined(USE_LIBRETINY) || defined(USE_ESP8266) || defined(USE_RP2040)
+#if defined(USE_LIBRETINY) || defined(USE_ESP8266) || defined(USE_RP2040) || (defined(USE_ESP32) && !SOC_RMT_SUPPORTED)
 
 namespace esphome::remote_receiver {
 
diff --git a/esphome/components/remote_receiver/remote_receiver.h b/esphome/components/remote_receiver/remote_receiver.h
index 3d9199a904..5da9283a6e 100644
--- a/esphome/components/remote_receiver/remote_receiver.h
+++ b/esphome/components/remote_receiver/remote_receiver.h
@@ -6,12 +6,15 @@
 #include <cinttypes>
 
 #if defined(USE_ESP32)
+#include <soc/soc_caps.h>
+#if SOC_RMT_SUPPORTED
 #include <driver/rmt_rx.h>
-#endif
+#endif  // SOC_RMT_SUPPORTED
+#endif  // USE_ESP32
 
 namespace esphome::remote_receiver {
 
-#if defined(USE_ESP8266) || defined(USE_LIBRETINY) || defined(USE_RP2040)
+#if defined(USE_ESP8266) || defined(USE_LIBRETINY) || defined(USE_RP2040) || (defined(USE_ESP32) && !SOC_RMT_SUPPORTED)
 struct RemoteReceiverComponentStore {
   static void gpio_intr(RemoteReceiverComponentStore *arg);
 
@@ -35,7 +38,7 @@ struct RemoteReceiverComponentStore {
   volatile bool prev_level{false};
   volatile bool overflow{false};
 };
-#elif defined(USE_ESP32)
+#elif defined(USE_ESP32) && SOC_RMT_SUPPORTED
 struct RemoteReceiverComponentStore {
   /// Stores RMT symbols and rx done event data
   volatile uint8_t *buffer{nullptr};
@@ -54,7 +57,7 @@ struct RemoteReceiverComponentStore {
 
 class RemoteReceiverComponent : public remote_base::RemoteReceiverBase,
                                 public Component
-#ifdef USE_ESP32
+#if defined(USE_ESP32) && SOC_RMT_SUPPORTED
     ,
                                 public remote_base::RemoteRMTChannel
 #endif
@@ -66,7 +69,7 @@ class RemoteReceiverComponent : public remote_base::RemoteReceiverBase,
   void dump_config() override;
   void loop() override;
 
-#ifdef USE_ESP32
+#if defined(USE_ESP32) && SOC_RMT_SUPPORTED
   void set_filter_symbols(uint32_t filter_symbols) { this->filter_symbols_ = filter_symbols; }
   void set_receive_symbols(uint32_t receive_symbols) { this->receive_symbols_ = receive_symbols; }
   void set_with_dma(bool with_dma) { this->with_dma_ = with_dma; }
@@ -78,7 +81,7 @@ class RemoteReceiverComponent : public remote_base::RemoteReceiverBase,
   void set_idle_us(uint32_t idle_us) { this->idle_us_ = idle_us; }
 
  protected:
-#ifdef USE_ESP32
+#if defined(USE_ESP32) && SOC_RMT_SUPPORTED
   void decode_rmt_(rmt_symbol_word_t *item, size_t item_count);
   rmt_channel_handle_t channel_{NULL};
   uint32_t filter_symbols_{0};
@@ -94,7 +97,7 @@ class RemoteReceiverComponent : public remote_base::RemoteReceiverBase,
   RemoteReceiverComponentStore store_;
 #endif
 
-#if defined(USE_ESP8266) || defined(USE_LIBRETINY) || defined(USE_RP2040)
+#if defined(USE_ESP8266) || defined(USE_LIBRETINY) || defined(USE_RP2040) || (defined(USE_ESP32) && !SOC_RMT_SUPPORTED)
   HighFrequencyLoopRequester high_freq_;
 #endif
 
diff --git a/esphome/components/remote_receiver/remote_receiver_esp32.cpp b/esphome/components/remote_receiver/remote_receiver_esp32.cpp
index f95244ea45..357a36d052 100644
--- a/esphome/components/remote_receiver/remote_receiver_esp32.cpp
+++ b/esphome/components/remote_receiver/remote_receiver_esp32.cpp
@@ -2,6 +2,8 @@
 #include "esphome/core/log.h"
 
 #ifdef USE_ESP32
+#include <soc/soc_caps.h>
+#if SOC_RMT_SUPPORTED
 #include <driver/gpio.h>
 #include <esp_clk_tree.h>
 
@@ -248,4 +250,5 @@ void RemoteReceiverComponent::decode_rmt_(rmt_symbol_word_t *item, size_t item_c
 
 }  // namespace esphome::remote_receiver
 
-#endif
+#endif  // SOC_RMT_SUPPORTED
+#endif  // USE_ESP32
diff --git a/esphome/components/remote_transmitter/__init__.py b/esphome/components/remote_transmitter/__init__.py
index 8383b9dd75..fc772f88b2 100644
--- a/esphome/components/remote_transmitter/__init__.py
+++ b/esphome/components/remote_transmitter/__init__.py
@@ -40,45 +40,66 @@ DigitalWriteAction = remote_transmitter_ns.class_(
     cg.Parented.template(RemoteTransmitterComponent),
 )
 
+
 MULTI_CONF = True
-CONFIG_SCHEMA = cv.Schema(
-    {
-        cv.GenerateID(): cv.declare_id(RemoteTransmitterComponent),
-        cv.Required(CONF_PIN): pins.gpio_output_pin_schema,
-        cv.Required(CONF_CARRIER_DUTY_PERCENT): cv.All(
-            cv.percentage_int, cv.Range(min=1, max=100)
-        ),
-        cv.Optional(CONF_CLOCK_RESOLUTION): cv.All(
-            cv.only_on_esp32,
-            esp32_rmt.validate_clock_resolution(),
-        ),
-        cv.Optional(CONF_EOT_LEVEL): cv.All(cv.only_on_esp32, cv.boolean),
-        cv.Optional(CONF_USE_DMA): cv.All(
-            esp32.only_on_variant(
-                supported=[esp32.VARIANT_ESP32P4, esp32.VARIANT_ESP32S3]
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(RemoteTransmitterComponent),
+            cv.Required(CONF_PIN): pins.gpio_output_pin_schema,
+            cv.Required(CONF_CARRIER_DUTY_PERCENT): cv.All(
+                cv.percentage_int, cv.Range(min=1, max=100)
             ),
-            cv.boolean,
-        ),
-        cv.SplitDefault(
-            CONF_RMT_SYMBOLS,
-            esp32=64,
-            esp32_c3=48,
-            esp32_c5=48,
-            esp32_c6=48,
-            esp32_h2=48,
-            esp32_p4=48,
-            esp32_s2=64,
-            esp32_s3=48,
-        ): cv.All(cv.only_on_esp32, cv.int_range(min=2)),
-        cv.Optional(CONF_NON_BLOCKING): cv.All(cv.only_on_esp32, cv.boolean),
-        cv.Optional(CONF_ON_TRANSMIT): automation.validate_automation(single=True),
-        cv.Optional(CONF_ON_COMPLETE): automation.validate_automation(single=True),
-    }
-).extend(cv.COMPONENT_SCHEMA)
+            cv.Optional(CONF_CLOCK_RESOLUTION): cv.All(
+                cv.only_on_esp32,
+                esp32_rmt.validate_clock_resolution(),
+            ),
+            cv.Optional(CONF_EOT_LEVEL): cv.All(cv.only_on_esp32, cv.boolean),
+            cv.Optional(CONF_USE_DMA): cv.All(
+                esp32.only_on_variant(
+                    supported=[esp32.VARIANT_ESP32P4, esp32.VARIANT_ESP32S3]
+                ),
+                cv.boolean,
+            ),
+            cv.SplitDefault(
+                CONF_RMT_SYMBOLS,
+                esp32=64,
+                esp32_c2=cv.UNDEFINED,
+                esp32_c3=48,
+                esp32_c5=48,
+                esp32_c6=48,
+                esp32_c61=cv.UNDEFINED,
+                esp32_h2=48,
+                esp32_p4=48,
+                esp32_s2=64,
+                esp32_s3=48,
+            ): cv.All(cv.only_on_esp32, cv.int_range(min=2)),
+            cv.Optional(CONF_NON_BLOCKING): cv.All(cv.only_on_esp32, cv.boolean),
+            cv.Optional(CONF_ON_TRANSMIT): automation.validate_automation(single=True),
+            cv.Optional(CONF_ON_COMPLETE): automation.validate_automation(single=True),
+        }
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+    .add_extra(
+        esp32_rmt.validate_rmt_not_supported(
+            [
+                CONF_CLOCK_RESOLUTION,
+                CONF_EOT_LEVEL,
+                CONF_USE_DMA,
+                CONF_RMT_SYMBOLS,
+                CONF_NON_BLOCKING,
+            ]
+        )
+    )
+)
 
 
 def _validate_non_blocking(config):
-    if CORE.is_esp32 and CONF_NON_BLOCKING not in config:
+    if (
+        CORE.is_esp32
+        and esp32.get_esp32_variant() not in esp32_rmt.VARIANTS_NO_RMT
+        and CONF_NON_BLOCKING not in config
+    ):
         _LOGGER.warning(
             "'non_blocking' is not set for 'remote_transmitter' and will default to 'true'.\n"
             "The default behavior changed in 2025.11.0; previously blocking mode was used.\n"
@@ -111,7 +132,7 @@ async def digital_write_action_to_code(config, action_id, template_arg, args):
 
 async def to_code(config):
     pin = await cg.gpio_pin_expression(config[CONF_PIN])
-    if CORE.is_esp32:
+    if CORE.is_esp32 and esp32.get_esp32_variant() not in esp32_rmt.VARIANTS_NO_RMT:
         # Re-enable ESP-IDF's RMT driver (excluded by default to save compile time)
         esp32.include_builtin_idf_component("esp_driver_rmt")
 
@@ -155,6 +176,8 @@ FILTER_SOURCE_FILES = filter_source_files_from_platform(
             PlatformFramework.ESP32_IDF,
         },
         "remote_transmitter.cpp": {
+            PlatformFramework.ESP32_ARDUINO,
+            PlatformFramework.ESP32_IDF,
             PlatformFramework.ESP8266_ARDUINO,
             PlatformFramework.BK72XX_ARDUINO,
             PlatformFramework.RTL87XX_ARDUINO,
diff --git a/esphome/components/remote_transmitter/automation.h b/esphome/components/remote_transmitter/automation.h
index bee1d0be8a..8da4cfd95d 100644
--- a/esphome/components/remote_transmitter/automation.h
+++ b/esphome/components/remote_transmitter/automation.h
@@ -5,8 +5,7 @@
 #include "esphome/core/component.h"
 #include "esphome/core/helpers.h"
 
-namespace esphome {
-namespace remote_transmitter {
+namespace esphome::remote_transmitter {
 
 template<typename... Ts> class DigitalWriteAction : public Action<Ts...>, public Parented<RemoteTransmitterComponent> {
  public:
@@ -14,5 +13,4 @@ template<typename... Ts> class DigitalWriteAction : public Action<Ts...>, public
   void play(const Ts &...x) override { this->parent_->digital_write(this->value_.value(x...)); }
 };
 
-}  // namespace remote_transmitter
-}  // namespace esphome
+}  // namespace esphome::remote_transmitter
diff --git a/esphome/components/remote_transmitter/remote_transmitter.cpp b/esphome/components/remote_transmitter/remote_transmitter.cpp
index d35541e2e1..51a3c0b1d4 100644
--- a/esphome/components/remote_transmitter/remote_transmitter.cpp
+++ b/esphome/components/remote_transmitter/remote_transmitter.cpp
@@ -2,10 +2,9 @@
 #include "esphome/core/log.h"
 #include "esphome/core/application.h"
 
-#if defined(USE_LIBRETINY) || defined(USE_ESP8266) || defined(USE_RP2040)
+#if defined(USE_LIBRETINY) || defined(USE_ESP8266) || defined(USE_RP2040) || (defined(USE_ESP32) && !SOC_RMT_SUPPORTED)
 
-namespace esphome {
-namespace remote_transmitter {
+namespace esphome::remote_transmitter {
 
 static const char *const TAG = "remote_transmitter";
 
@@ -105,7 +104,6 @@ void RemoteTransmitterComponent::send_internal(uint32_t send_times, uint32_t sen
   this->complete_trigger_.trigger();
 }
 
-}  // namespace remote_transmitter
-}  // namespace esphome
+}  // namespace esphome::remote_transmitter
 
 #endif
diff --git a/esphome/components/remote_transmitter/remote_transmitter.h b/esphome/components/remote_transmitter/remote_transmitter.h
index 65bd2ac8b2..aee52ea170 100644
--- a/esphome/components/remote_transmitter/remote_transmitter.h
+++ b/esphome/components/remote_transmitter/remote_transmitter.h
@@ -6,13 +6,15 @@
 #include <vector>
 
 #if defined(USE_ESP32)
+#include <soc/soc_caps.h>
+#if SOC_RMT_SUPPORTED
 #include <driver/rmt_tx.h>
-#endif
+#endif  // SOC_RMT_SUPPORTED
+#endif  // USE_ESP32
 
-namespace esphome {
-namespace remote_transmitter {
+namespace esphome::remote_transmitter {
 
-#ifdef USE_ESP32
+#if defined(USE_ESP32) && SOC_RMT_SUPPORTED
 #if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 5, 1)
 // IDF version 5.5.1 and above is required because of a bug in
 // the RMT encoder: https://github.com/espressif/esp-idf/issues/17244
@@ -33,7 +35,7 @@ struct RemoteTransmitterComponentStore {
 
 class RemoteTransmitterComponent : public remote_base::RemoteTransmitterBase,
                                    public Component
-#ifdef USE_ESP32
+#if defined(USE_ESP32) && SOC_RMT_SUPPORTED
     ,
                                    public remote_base::RemoteRMTChannel
 #endif
@@ -51,7 +53,7 @@ class RemoteTransmitterComponent : public remote_base::RemoteTransmitterBase,
 
   void digital_write(bool value);
 
-#if defined(USE_ESP32)
+#if defined(USE_ESP32) && SOC_RMT_SUPPORTED
   void set_with_dma(bool with_dma) { this->with_dma_ = with_dma; }
   void set_eot_level(bool eot_level) { this->eot_level_ = eot_level; }
   void set_non_blocking(bool non_blocking) { this->non_blocking_ = non_blocking; }
@@ -62,7 +64,7 @@ class RemoteTransmitterComponent : public remote_base::RemoteTransmitterBase,
 
  protected:
   void send_internal(uint32_t send_times, uint32_t send_wait) override;
-#if defined(USE_ESP8266) || defined(USE_LIBRETINY) || defined(USE_RP2040)
+#if defined(USE_ESP8266) || defined(USE_LIBRETINY) || defined(USE_RP2040) || (defined(USE_ESP32) && !SOC_RMT_SUPPORTED)
   void calculate_on_off_time_(uint32_t carrier_frequency, uint32_t *on_time_period, uint32_t *off_time_period);
 
   void mark_(uint32_t on_time, uint32_t off_time, uint32_t usec);
@@ -73,7 +75,7 @@ class RemoteTransmitterComponent : public remote_base::RemoteTransmitterBase,
   uint32_t target_time_;
 #endif
 
-#ifdef USE_ESP32
+#if defined(USE_ESP32) && SOC_RMT_SUPPORTED
   void configure_rmt_();
   void wait_for_rmt_();
 
@@ -100,5 +102,4 @@ class RemoteTransmitterComponent : public remote_base::RemoteTransmitterBase,
   Trigger<> complete_trigger_;
 };
 
-}  // namespace remote_transmitter
-}  // namespace esphome
+}  // namespace esphome::remote_transmitter
diff --git a/esphome/components/remote_transmitter/remote_transmitter_esp32.cpp b/esphome/components/remote_transmitter/remote_transmitter_esp32.cpp
index 89d97895b2..71773e3ddf 100644
--- a/esphome/components/remote_transmitter/remote_transmitter_esp32.cpp
+++ b/esphome/components/remote_transmitter/remote_transmitter_esp32.cpp
@@ -3,10 +3,11 @@
 #include "esphome/core/application.h"
 
 #ifdef USE_ESP32
+#include <soc/soc_caps.h>
+#if SOC_RMT_SUPPORTED
 #include <driver/gpio.h>
 
-namespace esphome {
-namespace remote_transmitter {
+namespace esphome::remote_transmitter {
 
 static const char *const TAG = "remote_transmitter";
 
@@ -358,7 +359,7 @@ void RemoteTransmitterComponent::send_internal(uint32_t send_times, uint32_t sen
 }
 #endif
 
-}  // namespace remote_transmitter
-}  // namespace esphome
+}  // namespace esphome::remote_transmitter
 
-#endif
+#endif  // SOC_RMT_SUPPORTED
+#endif  // USE_ESP32
diff --git a/esphome/components/speed/fan/speed_fan.cpp b/esphome/components/speed/fan/speed_fan.cpp
index af98e3a51f..55f7fd162c 100644
--- a/esphome/components/speed/fan/speed_fan.cpp
+++ b/esphome/components/speed/fan/speed_fan.cpp
@@ -7,15 +7,15 @@ namespace speed {
 static const char *const TAG = "speed.fan";
 
 void SpeedFan::setup() {
+  // Construct traits before restore so preset modes can be looked up by index
+  this->traits_ = fan::FanTraits(this->oscillating_ != nullptr, true, this->direction_ != nullptr, this->speed_count_);
+  this->traits_.set_supported_preset_modes(this->preset_modes_);
+
   auto restore = this->restore_state_();
   if (restore.has_value()) {
     restore->apply(*this);
     this->write_state_();
   }
-
-  // Construct traits
-  this->traits_ = fan::FanTraits(this->oscillating_ != nullptr, true, this->direction_ != nullptr, this->speed_count_);
-  this->traits_.set_supported_preset_modes(this->preset_modes_);
 }
 
 void SpeedFan::dump_config() { LOG_FAN("", "Speed Fan", this); }
diff --git a/esphome/components/template/fan/template_fan.cpp b/esphome/components/template/fan/template_fan.cpp
index 0e1920a984..cd267bd552 100644
--- a/esphome/components/template/fan/template_fan.cpp
+++ b/esphome/components/template/fan/template_fan.cpp
@@ -6,15 +6,15 @@ namespace esphome::template_ {
 static const char *const TAG = "template.fan";
 
 void TemplateFan::setup() {
+  // Construct traits before restore so preset modes can be looked up by index
+  this->traits_ =
+      fan::FanTraits(this->has_oscillating_, this->speed_count_ > 0, this->has_direction_, this->speed_count_);
+  this->traits_.set_supported_preset_modes(this->preset_modes_);
+
   auto restore = this->restore_state_();
   if (restore.has_value()) {
     restore->apply(*this);
   }
-
-  // Construct traits
-  this->traits_ =
-      fan::FanTraits(this->has_oscillating_, this->speed_count_ > 0, this->has_direction_, this->speed_count_);
-  this->traits_.set_supported_preset_modes(this->preset_modes_);
 }
 
 void TemplateFan::dump_config() { LOG_FAN("", "Template Fan", this); }
diff --git a/tests/components/combination/common.yaml b/tests/components/combination/common.yaml
index 0e5d512d08..5d46419399 100644
--- a/tests/components/combination/common.yaml
+++ b/tests/components/combination/common.yaml
@@ -27,9 +27,9 @@ sensor:
     name: Linearly combined temperatures
     sources:
       - source: template_temperature1
-        coeffecient: !lambda "return 0.4 + std::abs(x - 25) * 0.023;"
+        coefficient: !lambda "return 0.4 + std::abs(x - 25) * 0.023;"
       - source: template_temperature2
-        coeffecient: 1.5
+        coefficient: 1.5
   - platform: combination
     type: max
     name: Max of combined temperatures
diff --git a/tests/components/epaper_spi/test.esp32-s3-idf.yaml b/tests/components/epaper_spi/test.esp32-s3-idf.yaml
index 333ab567cd..9593d0f6f0 100644
--- a/tests/components/epaper_spi/test.esp32-s3-idf.yaml
+++ b/tests/components/epaper_spi/test.esp32-s3-idf.yaml
@@ -57,6 +57,23 @@ display:
       allow_other_uses: true
       number: GPIO4
 
+  - platform: epaper_spi
+    spi_id: spi_bus
+    model: waveshare-7.5in-H
+    cs_pin:
+      allow_other_uses: true
+      number: GPIO5
+    dc_pin:
+      allow_other_uses: true
+      number: GPIO17
+    reset_pin:
+      allow_other_uses: true
+      number: GPIO16
+    busy_pin:
+      allow_other_uses: true
+      number: GPIO4
+      inverted: true
+
   - platform: epaper_spi
     model: seeed-reterminal-e1002
   - platform: epaper_spi
@@ -64,3 +81,66 @@ display:
     # Override pins to avoid conflict with other display configs
     busy_pin: 43
     dc_pin: 42
+
+  # WeAct 2.13" 3-color e-paper (122x250, SSD1680)
+  - platform: epaper_spi
+    spi_id: spi_bus
+    model: weact-2.13in-3c
+    cs_pin:
+      allow_other_uses: true
+      number: GPIO5
+    dc_pin:
+      allow_other_uses: true
+      number: GPIO17
+    reset_pin:
+      allow_other_uses: true
+      number: GPIO16
+    busy_pin:
+      allow_other_uses: true
+      number: GPIO4
+    lambda: |-
+      it.filled_rectangle(0, 0, it.get_width(), it.get_height(), Color::WHITE);
+      it.circle(it.get_width() / 2, it.get_height() / 2, 20, Color::BLACK);
+      it.circle(it.get_width() / 2, it.get_height() / 2, 15, Color(255, 0, 0));
+
+  # WeAct 2.9" 3-color e-paper (128x296, SSD1683)
+  - platform: epaper_spi
+    spi_id: spi_bus
+    model: weact-2.9in-3c
+    cs_pin:
+      allow_other_uses: true
+      number: GPIO5
+    dc_pin:
+      allow_other_uses: true
+      number: GPIO17
+    reset_pin:
+      allow_other_uses: true
+      number: GPIO16
+    busy_pin:
+      allow_other_uses: true
+      number: GPIO4
+    lambda: |-
+      it.filled_rectangle(0, 0, it.get_width(), it.get_height(), Color::WHITE);
+      it.circle(it.get_width() / 2, it.get_height() / 2, 20, Color::BLACK);
+      it.circle(it.get_width() / 2, it.get_height() / 2, 15, Color(255, 0, 0));
+
+  # WeAct 4.2" 3-color e-paper (400x300, SSD1683)
+  - platform: epaper_spi
+    spi_id: spi_bus
+    model: weact-4.2in-3c
+    cs_pin:
+      allow_other_uses: true
+      number: GPIO5
+    dc_pin:
+      allow_other_uses: true
+      number: GPIO17
+    reset_pin:
+      allow_other_uses: true
+      number: GPIO16
+    busy_pin:
+      allow_other_uses: true
+      number: GPIO4
+    lambda: |-
+      it.filled_rectangle(0, 0, it.get_width(), it.get_height(), Color::WHITE);
+      it.circle(it.get_width() / 2, it.get_height() / 2, 30, Color::BLACK);
+      it.circle(it.get_width() / 2, it.get_height() / 2, 20, Color(255, 0, 0));
diff --git a/tests/components/remote_receiver/test.esp32-c2-idf.yaml b/tests/components/remote_receiver/test.esp32-c2-idf.yaml
new file mode 100644
index 0000000000..87154e19fc
--- /dev/null
+++ b/tests/components/remote_receiver/test.esp32-c2-idf.yaml
@@ -0,0 +1,12 @@
+remote_receiver:
+  id: rcvr
+  pin: GPIO2
+  dump: all
+  <<: !include common-actions.yaml
+
+binary_sensor:
+  - platform: remote_receiver
+    name: Panasonic Remote Input
+    panasonic:
+      address: 0x4004
+      command: 0x100BCBD
diff --git a/tests/components/remote_transmitter/test.esp32-c2-idf.yaml b/tests/components/remote_transmitter/test.esp32-c2-idf.yaml
new file mode 100644
index 0000000000..424cd8d249
--- /dev/null
+++ b/tests/components/remote_transmitter/test.esp32-c2-idf.yaml
@@ -0,0 +1,7 @@
+remote_transmitter:
+  id: xmitr
+  pin: GPIO2
+  carrier_duty_percent: 50%
+
+packages:
+  buttons: !include common-buttons.yaml