Merge remote-tracking branch 'upstream/dev' into remove_posix_tz_parser

tests/components/esp32/test.esp32-idf.yaml

@@ -10,6 +10,7 @@ esp32:
       use_full_certificate_bundle: false  # Test CMN bundle (default)
       include_builtin_idf_components:
         - freertos  # Test escape hatch (freertos is always included anyway)
+      enable_full_printf: false
       disable_debug_stubs: true
       disable_ocd_aware: true
       disable_usb_serial_jtag_secondary: true

tests/components/esp32_ble/test-extended-auth-req-params-single.esp32-idf.yaml

@@ -0,0 +1,6 @@
+esp32_ble:
+  io_capability: keyboard_display
+  # Explicitly not setting some parameters to test ifdef selection
+  # max_key_size: 16
+  # min_key_size: 7
+  auth_req_mode: sc_mitm_bond

tests/components/esp32_ble/test-extended-auth-req-params.esp32-idf.yaml

@@ -0,0 +1,5 @@
+esp32_ble:
+  io_capability: keyboard_display
+  max_key_size: 16
+  min_key_size: 7
+  auth_req_mode: sc_mitm_bond

tests/components/esp32_hosted/test-sdio-speed.esp32-p4-idf.yaml

@@ -0,0 +1,16 @@
+esp32_hosted:
+  variant: ESP32C6
+  slot: 1
+  active_high: true
+  reset_pin: GPIO15
+  cmd_pin: GPIO13
+  clk_pin: GPIO12
+  d0_pin: GPIO11
+  d1_pin: GPIO10
+  d2_pin: GPIO9
+  d3_pin: GPIO8
+  sdio_frequency: 8MHz
+
+wifi:
+  ssid: MySSID
+  password: password1

tests/components/esp32_touch/common-variants.yaml

@@ -4,7 +4,6 @@ esp32_touch:
   measurement_duration: 8ms
   low_voltage_reference: 0.5V
   high_voltage_reference: 2.7V
-  voltage_attenuation: 1.5V
 
 binary_sensor:
   - platform: esp32_touch

tests/components/esp32_touch/test.esp32-p4-idf.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  pin: GPIO5
+
+<<: !include common-variants.yaml
+<<: !include common-get-value.yaml

tests/components/gps/common.yaml

@@ -1,8 +1,15 @@
 gps:
   latitude:
     name: "Latitude"
+    id: gps_lat
+    on_value:
+      then:
+        - logger.log:
+            format: "%.6f, %.6f"
+            args: [id(gps_lat).state, id(gps_long).state]
   longitude:
     name: "Longitude"
+    id: gps_long
   altitude:
     name: "Altitude"
   speed:

tests/components/safe_mode/common-enabled.yaml

@@ -16,3 +16,7 @@ button:
 switch:
   - platform: safe_mode
     name: Safe Mode Switch
+
+esphome:
+  on_boot:
+    - safe_mode.mark_successful

tests/components/sen6x/common.yaml

@@ -0,0 +1,37 @@
+sensor:
+  # Test with explicit type parameter
+  - platform: sen6x
+    id: sen6x_sensor
+    type: SEN69C
+    i2c_id: i2c_bus
+    temperature:
+      name: Temperature
+      accuracy_decimals: 1
+    humidity:
+      name: Humidity
+      accuracy_decimals: 0
+    pm_1_0:
+      name: PM <1µm Weight concentration
+      id: sen6x_pm_1_0
+      accuracy_decimals: 1
+    pm_2_5:
+      name: PM <2.5µm Weight concentration
+      id: sen6x_pm_2_5
+      accuracy_decimals: 1
+    pm_4_0:
+      name: PM <4µm Weight concentration
+      id: sen6x_pm_4_0
+      accuracy_decimals: 1
+    pm_10_0:
+      name: PM <10µm Weight concentration
+      id: sen6x_pm_10_0
+      accuracy_decimals: 1
+    nox:
+      name: NOx
+    voc:
+      name: VOC
+    co2:
+      name: Carbon Dioxide
+    formaldehyde:
+      name: Formaldehyde
+    address: 0x6B

tests/components/sen6x/test.esp32-idf.yaml

@@ -0,0 +1,4 @@
+packages:
+  i2c: !include ../../test_build_components/common/i2c/esp32-idf.yaml
+
+<<: !include common.yaml

tests/components/sen6x/test.esp8266-ard.yaml

@@ -0,0 +1,4 @@
+packages:
+  i2c: !include ../../test_build_components/common/i2c/esp8266-ard.yaml
+
+<<: !include common.yaml

tests/components/sen6x/test.rp2040-ard.yaml

@@ -0,0 +1,4 @@
+packages:
+  i2c: !include ../../test_build_components/common/i2c/rp2040-ard.yaml
+
+<<: !include common.yaml

tests/components/socket/test_wake_loop_threadsafe.py

@@ -1,9 +1,14 @@
+import pytest
+
 from esphome.components import socket
 from esphome.const import (
     KEY_CORE,
     KEY_TARGET_PLATFORM,
+    PLATFORM_BK72XX,
     PLATFORM_ESP32,
     PLATFORM_ESP8266,
+    PLATFORM_LN882X,
+    PLATFORM_RTL87XX,
 )
 from esphome.core import CORE
 
@@ -90,9 +95,15 @@ def test_require_wake_loop_threadsafe__no_networking_does_not_consume_socket() -
     assert udp_consumers == initial_udp
 
 
-def test_require_wake_loop_threadsafe__esp32_no_udp_socket() -> None:
-    """Test that ESP32 uses task notifications instead of UDP socket."""
-    _setup_platform(PLATFORM_ESP32)
+@pytest.mark.parametrize(
+    "platform",
+    [PLATFORM_ESP32, PLATFORM_BK72XX, PLATFORM_RTL87XX, PLATFORM_LN882X],
+)
+def test_require_wake_loop_threadsafe__fast_select_no_udp_socket(
+    platform: str,
+) -> None:
+    """Test that fast select platforms use task notifications instead of UDP socket."""
+    _setup_platform(platform)
     CORE.config = {"wifi": True}
     socket.require_wake_loop_threadsafe()
 
@@ -100,13 +111,13 @@ def test_require_wake_loop_threadsafe__esp32_no_udp_socket() -> None:
     assert CORE.data[socket.KEY_WAKE_LOOP_THREADSAFE_REQUIRED] is True
     assert any(d.name == "USE_WAKE_LOOP_THREADSAFE" for d in CORE.defines)
 
-    # Verify no UDP socket was consumed (ESP32 uses FreeRTOS task notifications)
+    # Verify no UDP socket was consumed (fast select platforms use FreeRTOS task notifications)
     udp_consumers = CORE.data.get(socket.KEY_SOCKET_CONSUMERS_UDP, {})
     assert "socket.wake_loop_threadsafe" not in udp_consumers
 
 
-def test_require_wake_loop_threadsafe__non_esp32_consumes_udp_socket() -> None:
-    """Test that non-ESP32 platforms consume a UDP socket for wake notifications."""
+def test_require_wake_loop_threadsafe__non_fast_select_consumes_udp_socket() -> None:
+    """Test that platforms without fast select consume a UDP socket for wake notifications."""
     _setup_platform(PLATFORM_ESP8266)
     CORE.config = {"wifi": True}
     socket.require_wake_loop_threadsafe()

tests/components/wifi/test.bk72xx-ard.yaml

@@ -0,0 +1 @@
+<<: !include common.yaml

tests/components/wifi/test.ln882x-ard.yaml

@@ -0,0 +1 @@
+<<: !include common.yaml

tests/components/wifi/test.rtl87xx-ard.yaml

@@ -0,0 +1 @@
+<<: !include common.yaml