Merge branch 'api-encode-pos-by-value' into api-static-encode-entry

tests/benchmarks/stubs/esphome/components/serial_proxy/serial_proxy.h

@@ -40,6 +40,9 @@ class SerialProxy {
     return SerialProxyResult::SERIAL_PROXY_RESULT_OK;
   }
   void write_from_client(api::APIConnection *api_connection, const uint8_t *data, size_t len) {}
+  SerialProxyResult set_mode_from_client(api::APIConnection *api_connection, api::enums::SerialProxyMode mode) {
+    return SerialProxyResult::SERIAL_PROXY_RESULT_OK;
+  }
   SerialProxyResult set_modem_pins(api::APIConnection *api_connection, uint32_t line_states) {
     return SerialProxyResult::SERIAL_PROXY_RESULT_OK;
   }

tests/component_tests/lvgl/config/keyboard_no_label.yaml

@@ -0,0 +1,32 @@
+esphome:
+  name: test-keyboard-no-label
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+
+spi:
+  - id: spi_bus
+    clk_pin: GPIO18
+    mosi_pin: GPIO23
+
+display:
+  - platform: mipi_spi
+    spi_id: spi_bus
+    model: st7789v
+    id: tft_display
+    dimensions:
+      width: 240
+      height: 320
+    cs_pin: GPIO22
+    dc_pin: GPIO21
+    auto_clear_enabled: false
+    invert_colors: false
+    update_interval: never
+
+lvgl:
+  displays: tft_display
+  widgets:
+    - keyboard:
+        id: keyboard_widget

tests/component_tests/lvgl/config/qrcode_no_label.yaml

@@ -0,0 +1,34 @@
+esphome:
+  name: test-qrcode-no-label
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+
+spi:
+  - id: spi_bus
+    clk_pin: GPIO18
+    mosi_pin: GPIO23
+
+display:
+  - platform: mipi_spi
+    spi_id: spi_bus
+    model: st7789v
+    id: tft_display
+    dimensions:
+      width: 240
+      height: 320
+    cs_pin: GPIO22
+    dc_pin: GPIO21
+    auto_clear_enabled: false
+    invert_colors: false
+    update_interval: never
+
+lvgl:
+  displays: tft_display
+  widgets:
+    - qrcode:
+        id: qr_widget
+        size: 100
+        text: "esphome.io"

tests/component_tests/lvgl/config/tabview_no_label.yaml

@@ -0,0 +1,35 @@
+esphome:
+  name: test-tabview-no-label
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+
+spi:
+  - id: spi_bus
+    clk_pin: GPIO18
+    mosi_pin: GPIO23
+
+display:
+  - platform: mipi_spi
+    spi_id: spi_bus
+    model: st7789v
+    id: tft_display
+    dimensions:
+      width: 240
+      height: 320
+    cs_pin: GPIO22
+    dc_pin: GPIO21
+    auto_clear_enabled: false
+    invert_colors: false
+    update_interval: never
+
+lvgl:
+  displays: tft_display
+  widgets:
+    - tabview:
+        id: tabview_widget
+        tabs:
+          - name: "Tab 1"
+            id: tab_1

tests/component_tests/lvgl/test_widget_label_dependency.py

@@ -0,0 +1,32 @@
+"""Widgets whose LVGL C implementation creates or references labels
+internally (tab titles, key legends, the QR canvas fallback) must declare
+the label dependency in ``get_uses()``. Otherwise a config that contains
+no ``label`` widget of its own compiles LVGL without ``LV_USE_LABEL`` and
+fails at C compile time with undefined ``lv_label_*`` symbols.
+"""
+
+from __future__ import annotations
+
+from collections.abc import Callable
+from pathlib import Path
+
+import pytest
+
+from esphome.components.lvgl import defines as df
+
+
+@pytest.mark.parametrize(
+    "yaml_file",
+    [
+        "qrcode_no_label.yaml",
+        "keyboard_no_label.yaml",
+        "tabview_no_label.yaml",
+    ],
+)
+def test_label_less_config_enables_lv_use_label(
+    generate_main: Callable[[str | Path], str],
+    component_config_path: Callable[[str], Path],
+    yaml_file: str,
+) -> None:
+    generate_main(component_config_path(yaml_file))
+    assert "LV_USE_LABEL" in df.get_defines()

tests/component_tests/sendspin/config/device_info_default.yaml

@@ -0,0 +1,12 @@
+esphome:
+  name: test
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+
+wifi:
+  ap:
+
+sendspin:

tests/component_tests/sendspin/config/device_info_explicit.yaml

@@ -0,0 +1,18 @@
+esphome:
+  name: test
+  project:
+    name: project_manufacturer.project_model
+    version: 9.9.9
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+
+wifi:
+  ap:
+
+sendspin:
+  manufacturer: Explicit Manufacturer
+  model: Explicit Model
+  firmware_version: 1.2.3

tests/component_tests/sendspin/config/device_info_project.yaml

@@ -0,0 +1,15 @@
+esphome:
+  name: test
+  project:
+    name: project_manufacturer.project_model
+    version: 9.9.9
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+
+wifi:
+  ap:
+
+sendspin:

tests/component_tests/sendspin/test_device_info.py

@@ -0,0 +1,83 @@
+"""Tests for the device information the sendspin hub reports to the server."""
+
+from __future__ import annotations
+
+from collections.abc import Callable
+from pathlib import Path
+
+import pytest
+
+from esphome import config_validation as cv
+from esphome.components.sendspin import (
+    CONF_FIRMWARE_VERSION,
+    CONF_MANUFACTURER,
+    CONFIG_SCHEMA,
+)
+from esphome.const import CONF_MODEL, PlatformFramework
+from tests.component_tests.types import SetCoreConfigCallable
+
+
+def test_explicit_device_info_wins_over_project(
+    generate_main: Callable[[str | Path], str],
+    component_config_path: Callable[[str], Path],
+) -> None:
+    """Configured values take precedence over the project information."""
+    main_cpp = generate_main(component_config_path("device_info_explicit.yaml"))
+
+    assert 'set_manufacturer("Explicit Manufacturer")' in main_cpp
+    assert 'set_model("Explicit Model")' in main_cpp
+    assert 'set_firmware_version("1.2.3")' in main_cpp
+
+
+def test_project_supplies_device_info(
+    generate_main: Callable[[str | Path], str],
+    component_config_path: Callable[[str], Path],
+) -> None:
+    """Without configured values, the project name splits into manufacturer and model."""
+    main_cpp = generate_main(component_config_path("device_info_project.yaml"))
+
+    assert 'set_manufacturer("project_manufacturer")' in main_cpp
+    assert 'set_model("project_model")' in main_cpp
+    assert 'set_firmware_version("9.9.9")' in main_cpp
+
+
+def test_no_device_info_leaves_hub_defaults(
+    generate_main: Callable[[str | Path], str],
+    component_config_path: Callable[[str], Path],
+) -> None:
+    """With neither source, nothing is emitted and the hub keeps its own defaults."""
+    main_cpp = generate_main(component_config_path("device_info_default.yaml"))
+
+    assert "set_manufacturer(" not in main_cpp
+    assert "set_model(" not in main_cpp
+    assert "set_firmware_version(" not in main_cpp
+
+
+@pytest.mark.parametrize(
+    "conf_key", [CONF_MANUFACTURER, CONF_MODEL, CONF_FIRMWARE_VERSION]
+)
+def test_empty_device_info_rejected(
+    set_core_config: SetCoreConfigCallable, conf_key: str
+) -> None:
+    """An empty string would be sent to the server as an empty value, so it is not accepted."""
+    set_core_config(PlatformFramework.ESP32_IDF)
+
+    with pytest.raises(cv.Invalid):
+        CONFIG_SCHEMA({conf_key: ""})
+
+
+@pytest.mark.parametrize(
+    "conf_key", [CONF_MANUFACTURER, CONF_MODEL, CONF_FIRMWARE_VERSION]
+)
+def test_device_info_capped_at_127_bytes(
+    set_core_config: SetCoreConfigCallable, conf_key: str
+) -> None:
+    """The cap is in bytes so the protobuf length prefix stays a single byte."""
+    set_core_config(PlatformFramework.ESP32_IDF)
+
+    CONFIG_SCHEMA({conf_key: "a" * 127})
+    with pytest.raises(cv.Invalid):
+        CONFIG_SCHEMA({conf_key: "a" * 128})
+    # 64 two-byte characters is 128 bytes.
+    with pytest.raises(cv.Invalid):
+        CONFIG_SCHEMA({conf_key: "é" * 64})

tests/component_tests/sendspin/test_media_source.py

@@ -0,0 +1,90 @@
+"""Validation tests for the sendspin media_source platform.
+
+These cover the codec preference list, whose rejection branches a compile test
+cannot reach: a `test*.yaml` can only assert that a configuration is accepted.
+"""
+
+from typing import Any
+
+import pytest
+
+from esphome import config_validation as cv
+from esphome.components.sendspin import CONF_CODECS, _get_data
+from esphome.components.sendspin.media_source import CONFIG_SCHEMA
+from esphome.const import PlatformFramework
+from esphome.types import ConfigType
+from tests.component_tests.types import SetCoreConfigCallable
+
+
+def _media_source_config(**overrides: Any) -> ConfigType:
+    """Build a minimal valid media source config, allowing field overrides."""
+    config: ConfigType = {
+        "id": "sendspin_media_source",
+        "sendspin_id": "sendspin_hub",
+    }
+    config.update(overrides)
+    return config
+
+
+def test_default_codecs_at_48_khz(set_core_config: SetCoreConfigCallable) -> None:
+    """Every codec is advertised when the sample rate suits all of them."""
+    set_core_config(PlatformFramework.ESP32_IDF)
+
+    config = CONFIG_SCHEMA(_media_source_config())
+
+    assert config[CONF_CODECS] == ["flac", "opus", "pcm"]
+
+
+def test_default_codecs_drop_opus_at_other_rates(
+    set_core_config: SetCoreConfigCallable,
+) -> None:
+    """Opus only supports 48 kHz, so it leaves the default list at other rates."""
+    set_core_config(PlatformFramework.ESP32_IDF)
+
+    config = CONFIG_SCHEMA(_media_source_config(sample_rate=44100))
+
+    assert config[CONF_CODECS] == ["flac", "pcm"]
+
+
+def test_configured_order_is_preserved(set_core_config: SetCoreConfigCallable) -> None:
+    """The list is a preference order, so it reaches the player role as written."""
+    set_core_config(PlatformFramework.ESP32_IDF)
+
+    CONFIG_SCHEMA(_media_source_config(codecs=["pcm", "flac"]))
+
+    assert _get_data().player_config[CONF_CODECS] == ["pcm", "flac"]
+
+
+def test_empty_codec_list_rejected(set_core_config: SetCoreConfigCallable) -> None:
+    """A player with no codecs at all could never be given a stream."""
+    set_core_config(PlatformFramework.ESP32_IDF)
+
+    with pytest.raises(cv.Invalid, match="length of value must be at least 1"):
+        CONFIG_SCHEMA(_media_source_config(codecs=[]))
+
+
+def test_duplicate_codec_rejected(set_core_config: SetCoreConfigCallable) -> None:
+    """A repeated codec has no meaning in a preference order."""
+    set_core_config(PlatformFramework.ESP32_IDF)
+
+    with pytest.raises(cv.Invalid, match="may only be listed once"):
+        CONFIG_SCHEMA(_media_source_config(codecs=["flac", "flac"]))
+
+
+def test_unknown_codec_rejected(set_core_config: SetCoreConfigCallable) -> None:
+    """Only codecs the player role can decode are accepted."""
+    set_core_config(PlatformFramework.ESP32_IDF)
+
+    with pytest.raises(cv.Invalid, match="Unknown value"):
+        CONFIG_SCHEMA(_media_source_config(codecs=["mp3"]))
+
+
+def test_opus_at_wrong_sample_rate_rejected(
+    set_core_config: SetCoreConfigCallable,
+) -> None:
+    """Asking for Opus at a rate it cannot handle fails rather than silently
+    dropping the stated preference."""
+    set_core_config(PlatformFramework.ESP32_IDF)
+
+    with pytest.raises(cv.Invalid, match="requires a sample_rate of 48000"):
+        CONFIG_SCHEMA(_media_source_config(codecs=["opus"], sample_rate=44100))

tests/component_tests/template/test_template_visibility.py

@@ -0,0 +1,76 @@
+"""The template platforms surface value-describing metadata on the main form.
+
+Hardware platforms get sensible defaults for unit/device_class/etc., so those
+fields fall through to the editor's advanced disclosure. A ``template`` entity
+has no such defaults -- the user is expected to define them -- so the template
+platforms pass ``visibility=cv.Visibility.UI`` to promote them onto the form.
+"""
+
+from __future__ import annotations
+
+import importlib
+
+import pytest
+
+import esphome.config_validation as cv
+
+
+def _markers(schema: cv.Schema) -> dict[str, object]:
+    s = schema
+    if hasattr(s, "validators"):
+        # cv.All -> the schema is the first validator.
+        s = s.validators[0]
+    return {str(k): k for k in s.schema}
+
+
+@pytest.mark.parametrize(
+    ("platform", "fields"),
+    [
+        (
+            "sensor",
+            [
+                "unit_of_measurement",
+                "accuracy_decimals",
+                "device_class",
+                "state_class",
+                "force_update",
+            ],
+        ),
+        ("binary_sensor", ["device_class"]),
+        ("switch", ["device_class"]),
+        ("cover", ["device_class"]),
+        ("button", ["device_class"]),
+        ("valve", ["device_class"]),
+        ("event", ["device_class"]),
+        ("text_sensor", ["device_class"]),
+        ("number", ["device_class", "unit_of_measurement"]),
+    ],
+)
+def test_template_metadata_is_ui(platform: str, fields: list[str]) -> None:
+    mod = importlib.import_module(f"esphome.components.template.{platform}")
+    markers = _markers(mod.CONFIG_SCHEMA)
+    for field in fields:
+        assert markers[field].visibility is cv.Visibility.UI, f"{platform}.{field}"
+
+
+def test_template_sensor_promotion_preserves_defaults() -> None:
+    """Promoting to UI must not drop the fields' defaults."""
+    from esphome.components.template.sensor import CONFIG_SCHEMA
+
+    markers = _markers(CONFIG_SCHEMA)
+    assert markers["accuracy_decimals"].default() == 1
+    assert markers["force_update"].default() is False
+
+
+def test_hardware_platform_metadata_not_promoted() -> None:
+    """Without ``visibility=`` the builders leave metadata unset.
+
+    Unset markers fall through to the consumer's ``Optional`` default of
+    advanced, so hardware platforms are unaffected by the template promotion.
+    """
+    from esphome.components import binary_sensor, sensor
+
+    hw_sensor = _markers(sensor.sensor_schema(device_class="temperature"))
+    assert hw_sensor["device_class"].visibility is None
+    hw_bs = _markers(binary_sensor.binary_sensor_schema(device_class="motion"))
+    assert hw_bs["device_class"].visibility is None

tests/components/atm90e32/__init__.py

@@ -0,0 +1,5 @@
+from tests.testing_helpers import ComponentManifestOverride
+
+
+def override_manifest(manifest: ComponentManifestOverride) -> None:
+    manifest.dependencies = manifest.dependencies + ["sensor", "spi"]

tests/components/atm90e32/offset_register_verification_test.cpp

@@ -0,0 +1,62 @@
+#include <gtest/gtest.h>
+
+#include "esphome/components/atm90e32/atm90e32.h"
+
+namespace esphome::atm90e32::testing {
+
+TEST(ATM90E32OffsetRegisterVerification, AcceptsExactSignedReadback) {
+  EXPECT_TRUE(offset_register_value_matches(0x007B, 123));
+  EXPECT_TRUE(offset_register_value_matches(0xFF85, -123));
+}
+
+TEST(ATM90E32OffsetRegisterVerification, RejectsMismatchedReadback) {
+  EXPECT_FALSE(offset_register_value_matches(0x007C, 123));
+  EXPECT_FALSE(offset_register_value_matches(0xFF84, -123));
+}
+
+TEST(ATM90E32OffsetRestoreState, ReportsVerifiedStoredValuesAsRestored) {
+  const auto state = resolve_offset_restore_state(true, true, false);
+
+  EXPECT_TRUE(state.restored);
+  EXPECT_TRUE(state.values_verified);
+}
+
+TEST(ATM90E32OffsetRestoreState, ReportsVerifiedConfigFallbackAsNotRestored) {
+  const auto state = resolve_offset_restore_state(true, false, true);
+
+  EXPECT_FALSE(state.restored);
+  EXPECT_TRUE(state.values_verified);
+}
+
+TEST(ATM90E32OffsetRestoreState, ReportsFailedConfigFallbackAsUnverified) {
+  const auto state = resolve_offset_restore_state(true, false, false);
+
+  EXPECT_FALSE(state.restored);
+  EXPECT_FALSE(state.values_verified);
+}
+
+TEST(ATM90E32OffsetRestoreState, ReportsConfigWithoutStoredValuesAsNotRestored) {
+  const auto state = resolve_offset_restore_state(false, true, false);
+
+  EXPECT_FALSE(state.restored);
+  EXPECT_TRUE(state.values_verified);
+}
+
+TEST(ATM90E32OffsetPersistence, RollsBackStoredValuesOrZeroSentinel) {
+  const OffsetCalibration previous[3]{{1, -1}, {2, -2}, {3, -3}};
+  OffsetCalibration rollback[3]{};
+
+  prepare_offset_rollback(previous, true, rollback);
+  for (uint8_t phase = 0; phase < 3; phase++) {
+    EXPECT_EQ(rollback[phase].first_offset, previous[phase].first_offset);
+    EXPECT_EQ(rollback[phase].second_offset, previous[phase].second_offset);
+  }
+
+  prepare_offset_rollback(previous, false, rollback);
+  for (const auto &phase : rollback) {
+    EXPECT_EQ(phase.first_offset, 0);
+    EXPECT_EQ(phase.second_offset, 0);
+  }
+}
+
+}  // namespace esphome::atm90e32::testing

tests/components/sendspin/common-hub.yaml

@@ -4,3 +4,6 @@ psram:
 sendspin:
   id: sendspin_hub_id
   task_stack_in_psram: true
+  manufacturer: Test Manufacturer
+  model: Test Model
+  firmware_version: 1.2.3

tests/components/serial_proxy/test-tap.esp32-idf.yaml

@@ -0,0 +1,14 @@
+substitutions:
+  tx_pin: GPIO4
+  rx_pin: GPIO5
+
+# Compile the tap code paths; no tap is attached, so this exercises the
+# null-tap branches that a normal build never defines.
+esphome:
+  platformio_options:
+    build_flags:
+      - "-DUSE_SERIAL_PROXY_TAP"
+
+packages:
+  uart: !include ../../test_build_components/common/uart/esp32-idf.yaml
+  serial_proxy: !include common.yaml

tests/components/tuya/test-no-network.bk72xx-ard.yaml

@@ -0,0 +1,29 @@
+# Tuya without any network component (no wifi/ethernet/api), as used on
+# serial-only or BLE-only Tuya MCU boards. Regression test for
+# https://github.com/esphome/esphome/issues/18942
+substitutions:
+  status_pin: P6
+
+packages:
+  uart: !include ../../test_build_components/common/uart/bk72xx-ard.yaml
+
+tuya:
+  status_pin: ${status_pin}
+
+binary_sensor:
+  - platform: tuya
+    id: tuya_presence
+    sensor_datapoint: 101
+
+sensor:
+  - platform: tuya
+    id: tuya_light_intensity
+    sensor_datapoint: 103
+
+number:
+  - platform: tuya
+    id: tuya_far_detection
+    number_datapoint: 109
+    min_value: 0
+    max_value: 600
+    step: 1

tests/integration/README.md

@@ -21,6 +21,13 @@ The `yaml_config` fixture automatically loads YAML configurations based on the t
 - The fixture file must exist or the test will fail with a clear error message
 - The fixture automatically injects a dynamic port number into the API configuration
 
+Tests marked `@pytest.mark.shared_yaml("name")` load `fixtures/name.yaml` instead
+of the test-named file and compile it in a shared, hash-keyed build directory, so
+the whole group pays one full compile and each test only a relink. The marker
+argument must be a single-line string literal (CI test selection maps fixtures to
+test files by scanning for it), and marked tests must hand the `yaml_config`
+content to `run_compiled` unmodified.
+
 ### Key Fixtures
 
 - `run_compiled` - Combines write, compile, and run operations into a single context manager

tests/integration/conftest.py

@@ -4,17 +4,22 @@ from __future__ import annotations
 
 import asyncio
 from collections.abc import AsyncGenerator, Callable, Generator
-from contextlib import AbstractAsyncContextManager, asynccontextmanager
+from contextlib import AbstractAsyncContextManager, asynccontextmanager, suppress
 import fcntl
+from functools import cache
+import hashlib
 import logging
 import os
 from pathlib import Path
 import platform
+import re
+import shutil
 import signal
 import socket
 import subprocess
 import sys
 import tempfile
+import time
 from typing import TextIO
 
 from aioesphomeapi import APIClient, APIConnectionError, LogParser, ReconnectLogic
@@ -23,7 +28,13 @@ import pytest_asyncio
 
 import esphome.config
 from esphome.core import CORE
-from esphome.helpers import get_usable_cpu_count
+from esphome.helpers import (
+    get_usable_cpu_count,
+    read_file,
+    rmtree,
+    write_file,
+    write_file_if_changed,
+)
 from esphome.platformio.toolchain import get_idedata
 
 from .const import (
@@ -56,6 +67,21 @@ import pty  # not available on Windows
 pytest.register_assert_rewrite("tests.integration.entity_utils")
 
 
+def pytest_configure(config: pytest.Config) -> None:
+    config.addinivalue_line(
+        "markers",
+        "shared_yaml(name): load fixtures/<name>.yaml and compile it in a shared, "
+        "hash-keyed incremental build directory",
+    )
+
+
+FIXTURES_DIR = Path(__file__).parent / "fixtures"
+REPO_ROOT = Path(__file__).resolve().parent.parent.parent
+
+# CI caches parts of this path; keep in sync with ci.yml integration-tests.
+INTEGRATION_TESTS_ROOT = Path.home() / ".esphome-integration-tests"
+
+
 def _get_platformio_env(cache_dir: Path) -> dict[str, str]:
     """Get environment variables for PlatformIO with shared cache."""
     env = os.environ.copy()
@@ -78,7 +104,7 @@ def _get_platformio_env(cache_dir: Path) -> dict[str, str]:
         )
     # Compile with THIS tree's esphome sources, not wherever the venv's editable
     # install points (which may be a different git worktree or checkout).
-    repo_root = str(Path(__file__).resolve().parent.parent.parent)
+    repo_root = str(REPO_ROOT)
     existing = env.get("PYTHONPATH")
     env["PYTHONPATH"] = f"{repo_root}{os.pathsep}{existing}" if existing else repo_root
     return env
@@ -88,8 +114,7 @@ def _get_platformio_env(cache_dir: Path) -> dict[str, str]:
 def shared_platformio_cache() -> Generator[Path]:
     """Initialize a shared PlatformIO cache for all integration tests."""
     # Use a dedicated directory for integration tests to avoid conflicts.
-    # CI caches parts of this path; keep in sync with ci.yml integration-tests.
-    test_cache_dir = Path.home() / ".esphome-integration-tests"
+    test_cache_dir = INTEGRATION_TESTS_ROOT
     cache_dir = test_cache_dir / "platformio"
 
     # Use a lock file in the home directory to ensure only one process initializes the cache
@@ -112,7 +137,9 @@ def shared_platformio_cache() -> Generator[Path]:
                 init_dir = Path(tmpdir)
                 fixture_path = Path(__file__).parent / "fixtures" / "cache_init.yaml"
                 config_path = init_dir / "cache_init.yaml"
-                config_path.write_text(fixture_path.read_text())
+                config_path.write_text(
+                    fixture_path.read_text(encoding="utf-8"), encoding="utf-8"
+                )
 
                 # Run compilation to populate the cache
                 # We must succeed here to avoid race conditions where multiple
@@ -162,13 +189,6 @@ def integration_test_dir() -> Generator[Path]:
         yield Path(tmpdir)
 
 
-@pytest.fixture
-def isolated_preferences(monkeypatch: pytest.MonkeyPatch, tmp_path: Path) -> None:
-    """Host preferences persist per device name; give the test its own so a
-    provisioned key never leaks into another run."""
-    monkeypatch.setenv("ESPHOME_PREFDIR", str(tmp_path / "prefs"))
-
-
 @pytest.fixture
 def reserved_tcp_port() -> Generator[tuple[int, socket.socket]]:
     """Reserve an unused TCP port by holding the socket open."""
@@ -188,21 +208,29 @@ def unused_tcp_port(reserved_tcp_port: tuple[int, socket.socket]) -> int:
     return reserved_tcp_port[0]
 
 
+@pytest.fixture(autouse=True)
+def isolated_preferences(monkeypatch: pytest.MonkeyPatch, tmp_path: Path) -> Path:
+    """Give every test its own host prefs dir; prefs are keyed only by device
+    name, which tests sharing a fixture also share."""
+    prefdir = tmp_path / "prefs"
+    monkeypatch.setenv("ESPHOME_PREFDIR", str(prefdir))
+    return prefdir
+
+
 @pytest_asyncio.fixture
 async def yaml_config(request: pytest.FixtureRequest, unused_tcp_port: int) -> str:
     """Load YAML configuration based on test name."""
-    # Get the test function name
-    test_name: str = request.node.name
-    # Extract the base test name (remove test_ prefix and any parametrization)
-    base_name = test_name.replace("test_", "").partition("[")[0]
+    shared_name = _shared_yaml_name(request)
+    # Base test name: test_ prefix and any parametrization stripped
+    base_name = shared_name or request.node.name.replace("test_", "").partition("[")[0]
 
     # Load the fixture file
-    fixture_path = Path(__file__).parent / "fixtures" / f"{base_name}.yaml"
+    fixture_path = FIXTURES_DIR / f"{base_name}.yaml"
     if not fixture_path.exists():
         raise FileNotFoundError(f"Fixture file not found: {fixture_path}")
 
     loop = asyncio.get_running_loop()
-    content = await loop.run_in_executor(None, fixture_path.read_text)
+    content = await loop.run_in_executor(None, read_file, fixture_path)
 
     # Replace the port in the config if it contains api section
     if "api:" in content:
@@ -226,11 +254,13 @@ async def yaml_config(request: pytest.FixtureRequest, unused_tcp_port: int) -> s
 
     # Replace external component path placeholder if present
     if "EXTERNAL_COMPONENT_PATH" in content:
-        external_components_path = str(
-            Path(__file__).parent / "fixtures" / "external_components"
-        )
+        external_components_path = str(FIXTURES_DIR / "external_components")
         content = content.replace("EXTERNAL_COMPONENT_PATH", external_components_path)
 
+    if shared_name is not None:
+        # _compile verifies the marked test compiles this content unmodified
+        request.node._shared_yaml_content = content
+
     return content
 
 
@@ -240,24 +270,218 @@ async def write_yaml_config(
 ) -> AsyncGenerator[ConfigWriter]:
     """Write YAML configuration to a file."""
     # Get the test name for default filename
-    test_name = request.node.name
-    base_name = test_name.replace("test_", "").split("[")[0]
+    base_name = request.node.name.replace("test_", "").partition("[")[0]
 
     async def _write_config(content: str, filename: str | None = None) -> Path:
         if filename is None:
             filename = f"{base_name}.yaml"
         config_path = integration_test_dir / filename
         loop = asyncio.get_running_loop()
-        await loop.run_in_executor(None, config_path.write_text, content)
+        await loop.run_in_executor(None, write_file, config_path, content)
         return config_path
 
     yield _write_config
 
 
+# Deliberately not CI-cached (ci.yml caches only platformio/ subpaths); stale
+# dirs for a fixture are pruned when its content hash changes.
+SHARED_BUILDS_ROOT = INTEGRATION_TESTS_ROOT / "builds"
+
+# In the dir name (not just the hash) so pruning stays inside this checkout
+_REPO_KEY = hashlib.sha256(str(REPO_ROOT).encode()).hexdigest()[:8]
+
+# Give a contended shared build lock time for a full cold compile ahead of us
+_SHARED_LOCK_TIMEOUT_S = 900
+_SHARED_LOCK_POLL_S = 0.1
+_SHARED_LOCK_REPORT_S = 30
+
+# Reclaims dirs orphaned by fixture renames or deleted checkouts
+_STALE_BUILD_MAX_AGE_S = 30 * 24 * 3600
+
+# ELF path per shared build dir; constant once compiled, so resolve it only once
+_shared_elf_paths: dict[Path, Path] = {}
+
+# Dirs this process already swept; pruning is session-scoped work
+_pruned_dirs: set[Path] = set()
+
+
+def _shared_yaml_name(request: pytest.FixtureRequest) -> str | None:
+    """Name passed to the shared_yaml marker, or None when unmarked."""
+    marker = request.node.get_closest_marker("shared_yaml")
+    if marker is None:
+        return None
+    # Exactly one \w+ positional arg: the name doubles as a build dir
+    # component, and CI test selection (script/helpers.py) parses the same shape
+    if (
+        len(marker.args) != 1
+        or marker.kwargs
+        or not re.fullmatch(r"\w+", str(marker.args[0]))
+    ):
+        raise ValueError(
+            "shared_yaml marker requires exactly one \\w+ fixture name literal"
+        )
+    return marker.args[0]
+
+
+def _shared_build_prefix(name: str) -> str:
+    return f"{name}-{_REPO_KEY}-"
+
+
+@cache
+def _shared_build_dir(name: str) -> Path:
+    """Dir keyed by checkout and fixture source, before per-test injections."""
+    key = hashlib.sha256((FIXTURES_DIR / f"{name}.yaml").read_bytes()).hexdigest()[:16]
+    return SHARED_BUILDS_ROOT / (_shared_build_prefix(name) + key)
+
+
+def _read_stamp(stamp: Path, shared_dir: Path) -> Path | None:
+    """ELF path recorded by the last completed compile, or None."""
+    try:
+        text = stamp.read_text(encoding="utf-8").strip()
+    except FileNotFoundError:
+        return None
+    except OSError as err:
+        print(f"Cannot read {stamp}: {err}")
+        return None
+    if not text:
+        print(f"Ignoring empty stamp {stamp}")
+        return None
+    built = Path(text)
+    # Never trust a stamp pointing outside its own build dir as an unlink target
+    if shared_dir.resolve() in built.resolve().parents:
+        return built
+    print(f"Ignoring stamp {stamp} pointing outside {shared_dir}")
+    return None
+
+
+def _unused_since(stale: Path, cutoff: float) -> bool:
+    """Whether a build dir looks untouched since cutoff; unknown counts as used."""
+    # Newest of the .built stamp (rewritten by every completed compile) and the
+    # dir itself (freshened by a worker claiming the dir before locking)
+    newest: float | None = None
+    for probe in (stale / ".built", stale):
+        try:
+            mtime = probe.stat().st_mtime
+        except FileNotFoundError:
+            continue
+        except NotADirectoryError:
+            return True  # a stray file where a dir should be; reclaimable
+        except OSError as err:
+            print(f"Cannot age-probe {stale}: {err}")
+            return False  # unknown never authorizes deletion
+        newest = mtime if newest is None else max(newest, mtime)
+    return newest is not None and newest < cutoff
+
+
+def _prune_stale_builds(name: str, keep: Path) -> None:
+    """Remove outdated build dirs (blocking, run in executor): this checkout's
+    other dirs for the fixture, plus anything untouched for 30 days. Tolerates
+    other workers pruning the same dirs concurrently."""
+    cutoff = time.time() - _STALE_BUILD_MAX_AGE_S
+    prefix = _shared_build_prefix(name)
+    for stale in SHARED_BUILDS_ROOT.iterdir():
+        if stale == keep:
+            continue
+        same_fixture = stale.name.startswith(prefix)
+        if not same_fixture and not _unused_since(stale, cutoff):
+            continue
+        # Creating .lock bumps the dir mtime, so remember whether the re-probe
+        # under the lock can trust it
+        lock_preexisting = (stale / ".lock").exists()
+        try:
+            lock_file = (stale / ".lock").open("w")
+        except FileNotFoundError:
+            continue  # pruned by another worker meanwhile
+        except NotADirectoryError:
+            print(f"Removing stray file {stale}")
+            stale.unlink(missing_ok=True)
+            continue
+        except OSError as err:
+            print(f"Cannot prune {stale}: {err}")
+            continue
+        with lock_file:
+            try:
+                fcntl.flock(lock_file.fileno(), fcntl.LOCK_EX | fcntl.LOCK_NB)
+            except BlockingIOError:
+                continue  # still in use by another run
+            # Re-probe under the lock: a worker freshens its dir before
+            # locking, so a just-claimed dir no longer looks unused. A dir
+            # whose .lock we just created cannot be held by anyone, and our
+            # own open bumped its mtime, so its pre-open probe stands
+            if (
+                lock_preexisting
+                and not same_fixture
+                and not _unused_since(stale, cutoff)
+            ):
+                continue
+            # rmtree tolerates races; a leftover partial tree only costs a
+            # rebuild, since the ELF is deleted before every compile
+            try:
+                rmtree(stale)
+            except OSError as err:
+                print(f"Failed to prune {stale}: {err}")
+
+
+async def _run_esphome_compile(
+    config_path: Path, cwd: Path, env: dict[str, str]
+) -> None:
+    """Run `esphome compile`, retrying up to 3 times on a segfault."""
+    max_retries = 3
+    for attempt in range(max_retries):
+        # Compile using subprocess, inheriting stdout/stderr to show progress
+        proc = await asyncio.create_subprocess_exec(
+            sys.executable,
+            "-m",
+            "esphome",
+            "compile",
+            str(config_path),
+            cwd=cwd,
+            stdout=None,  # Inherit stdout
+            stderr=None,  # Inherit stderr
+            stdin=asyncio.subprocess.DEVNULL,
+            # Start in a new process group to isolate signal handling
+            start_new_session=True,
+            env=env,
+            close_fds=False,
+        )
+        await proc.wait()
+
+        if proc.returncode == 0:
+            break
+        if proc.returncode == -11 and attempt < max_retries - 1:
+            # Segfault (-11 = SIGSEGV), retry
+            print(
+                f"Compilation segfaulted (attempt {attempt + 1}/{max_retries}), retrying..."
+            )
+            await asyncio.sleep(1)  # Brief pause before retry
+            continue
+        raise RuntimeError(
+            f"Failed to compile {config_path}, return code: {proc.returncode}. "
+            f"Run with 'pytest -s' to see compilation output."
+        )
+
+
+def _resolve_compiled_binary(config_path: Path) -> Path:
+    """Load the config to learn the compiled ELF path (blocking, run in executor)."""
+    CORE.reset()  # Reset CORE state between test runs
+    CORE.config_path = config_path
+    config = esphome.config.read_config(
+        {"command": "compile", "config": str(config_path)}
+    )
+    if config is None:
+        raise RuntimeError(f"Failed to read config from {config_path}")
+    idedata = get_idedata(config)
+    binary_path = Path(idedata.firmware_elf_path)
+    if not binary_path.exists():
+        raise RuntimeError(f"Compiled binary not found at {binary_path}")
+    return binary_path
+
+
 @pytest_asyncio.fixture
 async def compile_esphome(
     integration_test_dir: Path,
     shared_platformio_cache: Path,
+    request: pytest.FixtureRequest,
 ) -> AsyncGenerator[CompileFunction]:
     """Compile an ESPHome configuration and return the binary path."""
 
@@ -265,66 +489,96 @@ async def compile_esphome(
         # Use the shared PlatformIO cache for faster compilation
         # This avoids re-downloading dependencies for each test
         env = _get_platformio_env(shared_platformio_cache)
-
-        # Retry compilation up to 3 times if we get a segfault
-        max_retries = 3
-        for attempt in range(max_retries):
-            # Compile using subprocess, inheriting stdout/stderr to show progress
-            proc = await asyncio.create_subprocess_exec(
-                sys.executable,
-                "-m",
-                "esphome",
-                "compile",
-                str(config_path),
-                cwd=integration_test_dir,
-                stdout=None,  # Inherit stdout
-                stderr=None,  # Inherit stderr
-                stdin=asyncio.subprocess.DEVNULL,
-                # Start in a new process group to isolate signal handling
-                start_new_session=True,
-                env=env,
-                close_fds=False,
-            )
-            await proc.wait()
-
-            if proc.returncode == 0:
-                # Success!
-                break
-            if proc.returncode == -11 and attempt < max_retries - 1:
-                # Segfault (-11 = SIGSEGV), retry
-                print(
-                    f"Compilation segfaulted (attempt {attempt + 1}/{max_retries}), retrying..."
-                )
-                await asyncio.sleep(1)  # Brief pause before retry
-                continue
-            # Other error or final retry
-            raise RuntimeError(
-                f"Failed to compile {config_path}, return code: {proc.returncode}. "
-                f"Run with 'pytest -s' to see compilation output."
-            )
-
-        # Load the config to get idedata (blocking call, must use executor)
         loop = asyncio.get_running_loop()
 
-        def _read_config_and_get_binary():
-            CORE.reset()  # Reset CORE state between test runs
-            CORE.config_path = config_path
-            config = esphome.config.read_config(
-                {"command": "compile", "config": str(config_path)}
+        name = _shared_yaml_name(request)
+        if name is None:
+            await _run_esphome_compile(config_path, integration_test_dir, env)
+            return await loop.run_in_executor(
+                None, _resolve_compiled_binary, config_path
             )
-            if config is None:
-                raise RuntimeError(f"Failed to read config from {config_path}")
 
-            # Get the compiled binary path
-            idedata = get_idedata(config)
-            return Path(idedata.firmware_elf_path)
-
-        binary_path = await loop.run_in_executor(None, _read_config_and_get_binary)
-
-        if not binary_path.exists():
-            raise RuntimeError(f"Compiled binary not found at {binary_path}")
-
-        return binary_path
+        # Shared fixture: build in a hash-keyed dir so tests sharing a config
+        # pay one full compile and later only a main.cpp (port) rebuild + relink
+        shared_dir = _shared_build_dir(name)
+        shared_dir.mkdir(parents=True, exist_ok=True)
+        # Freshen the dir before locking so a concurrent age sweep, which
+        # re-probes under the lock, never reaps a dir a worker just claimed;
+        # if a peer reaped it already, the guarded lock open recreates it
+        with suppress(FileNotFoundError):
+            os.utime(shared_dir)
+        if shared_dir not in _pruned_dirs:
+            _pruned_dirs.add(shared_dir)
+            await loop.run_in_executor(None, _prune_stale_builds, name, shared_dir)
+        shared_config = shared_dir / f"{name}.yaml"
+        private_binary = integration_test_dir / f"{name}.elf"
+        content = await loop.run_in_executor(None, read_file, config_path)
+        if content != getattr(request.node, "_shared_yaml_content", None):
+            # The dir is keyed by the fixture source; a mutated config would be
+            # cached under a hash that does not describe it
+            raise RuntimeError(
+                "shared_yaml tests must compile the yaml_config content unmodified"
+            )
+        # flock serializes concurrent xdist workers; closing the fd releases it.
+        # Hand-rolled rather than filelock.FileLock: non-blocking retries keep
+        # the wait cancellable, while a blocking acquire in an executor thread
+        # would survive test cancellation holding the fd
+        try:
+            lock_file = (shared_dir / ".lock").open("w")
+        except FileNotFoundError:
+            # A peer run pruning divergent hashes reaped the dir between our
+            # mkdir and this open; recreate it and pay a full rebuild
+            shared_dir.mkdir(parents=True, exist_ok=True)
+            lock_file = (shared_dir / ".lock").open("w")
+        with lock_file:
+            start = time.monotonic()
+            last_report = start
+            while True:
+                try:
+                    fcntl.flock(lock_file.fileno(), fcntl.LOCK_EX | fcntl.LOCK_NB)
+                    break
+                except BlockingIOError:
+                    now = time.monotonic()
+                    if now - start > _SHARED_LOCK_TIMEOUT_S:
+                        raise RuntimeError(
+                            f"Timed out waiting for the {shared_dir} lock"
+                        ) from None
+                    if now - last_report >= _SHARED_LOCK_REPORT_S:
+                        last_report = now
+                        print(
+                            f"Waited {now - start:.0f}s for another worker's "
+                            f"build of {shared_dir.name}"
+                        )
+                    await asyncio.sleep(_SHARED_LOCK_POLL_S)
+            # .built carries the ELF path of the last completed compile, so
+            # later workers skip the config re-read in _resolve_compiled_binary
+            stamp = shared_dir / ".built"
+            if (built := _shared_elf_paths.get(shared_dir)) is None:
+                built = await loop.run_in_executor(None, _read_stamp, stamp, shared_dir)
+            # Delete the ELF before compiling: whatever exists afterwards is
+            # this compile's output, so no staleness check is ever needed.
+            # With no usable stamp, sweep any leftover at the known layout
+            if built is not None:
+                built.unlink(missing_ok=True)
+            else:
+                # Layout-agnostic: ESPHOME_BUILD_PATH can move the build tree
+                for leftover in shared_dir.rglob("program"):
+                    if leftover.is_file():
+                        leftover.unlink()
+            await loop.run_in_executor(
+                None, write_file_if_changed, shared_config, content
+            )
+            await _run_esphome_compile(shared_config, shared_dir, env)
+            if built is None or not built.exists():
+                built = await loop.run_in_executor(
+                    None, _resolve_compiled_binary, shared_config
+                )
+            _shared_elf_paths[shared_dir] = built
+            await loop.run_in_executor(None, write_file, stamp, str(built))
+            # Copy out before unlocking: another worker may relink firmware.elf
+            # while this test is still running its private copy
+            await loop.run_in_executor(None, shutil.copy2, built, private_binary)
+        return private_binary
 
     yield _compile
 

tests/integration/fixtures/sensor_filters_batch_window.yaml

@@ -1,58 +0,0 @@
-esphome:
-  name: test-batch-window-filters
-
-host:
-api:
-  batch_delay: 0ms  # Disable batching to receive all state updates
-logger:
-  level: DEBUG
-
-# Template sensor that we'll use to publish values
-sensor:
-  - platform: template
-    name: "Source Sensor"
-    id: source_sensor
-    accuracy_decimals: 2
-
-  # Batch window filters (window_size == send_every) - use streaming filters
-  - platform: copy
-    source_id: source_sensor
-    name: "Min Sensor"
-    id: min_sensor
-    filters:
-      - min:
-          window_size: 5
-          send_every: 5
-          send_first_at: 1
-
-  - platform: copy
-    source_id: source_sensor
-    name: "Max Sensor"
-    id: max_sensor
-    filters:
-      - max:
-          window_size: 5
-          send_every: 5
-          send_first_at: 1
-
-  - platform: copy
-    source_id: source_sensor
-    name: "Moving Avg Sensor"
-    id: moving_avg_sensor
-    filters:
-      - sliding_window_moving_average:
-          window_size: 5
-          send_every: 5
-          send_first_at: 1
-
-# Button to trigger publishing test values
-button:
-  - platform: template
-    name: "Publish Values Button"
-    id: publish_button
-    on_press:
-      - lambda: |-
-          // Publish 10 values: 1.0, 2.0, ..., 10.0
-          for (int i = 1; i <= 10; i++) {
-            id(source_sensor).publish_state(float(i));
-          }

tests/integration/fixtures/uart_mock_modbus_client_read_write.yaml

@@ -1,111 +0,0 @@
-esphome:
-  name: uart-mock-modbus-cli-rw
-
-host:
-api:
-logger:
-  level: VERBOSE
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
-# The actual UART bus used is the uart_mock component below
-uart:
-  baud_rate: 115200
-  port: /dev/null
-
-# Two virtual buses looped back to each other: the client's transmissions reach the server and the
-# server's replies reach the client. auto_start so forwarding is active before the button fires.
-uart_mock:
-  - id: virtual_uart_server
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_client
-              data: !lambda return data;
-  - id: virtual_uart_client
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_server
-              data: !lambda return data;
-
-globals:
-  - id: stored_1
-    type: uint16_t
-    initial_value: "0"
-
-modbus:
-  - uart_id: virtual_uart_server
-    id: virtual_modbus_server
-    role: server
-  - uart_id: virtual_uart_client
-    id: virtual_modbus_client
-    role: client
-    turnaround_time: 10ms
-
-modbus_server:
-  - address: 1
-    modbus_id: virtual_modbus_server
-    registers:
-      # Writable + readable register: the read publishes what it returns, so the test can confirm the
-      # write half of the 0x17 ran before the read half (Modbus 6.17).
-      - address: 0x01
-        value_type: U_WORD
-        read_lambda: |-
-          id(srv_read_1).publish_state(id(stored_1));
-          return id(stored_1);
-        write_lambda: |-
-          id(stored_1) = x;
-          id(srv_write_1).publish_state(x);
-          return true;
-      # Read-only register, returned together with 0x01 by the 2-register read half.
-      - address: 0x02
-        value_type: U_WORD
-        read_lambda: return 0x00AA;
-
-sensor:
-  # Server-side observations.
-  - platform: template
-    name: "srv_write_1"
-    id: srv_write_1
-  - platform: template
-    name: "srv_read_1"
-    id: srv_read_1
-  # Client-side read-back: the values the client's on_response received.
-  - platform: template
-    name: "client_read_0"
-    id: client_read_0
-  - platform: template
-    name: "client_read_1"
-    id: client_read_1
-
-button:
-  - platform: template
-    name: "Start Scenario"
-    id: start_scenario_btn
-    on_press:
-      # FC 0x17: write reg 0x0001 = 0x1234, then read regs 0x0001..0x0002 back in the same transaction.
-      - modbus_client.read_write_multiple_registers:
-          address: 0x01
-          read_address: 0x0001
-          read_count: 2
-          write_address: 0x0001
-          values: [0x1234]
-          on_response:
-            then:
-              - lambda: |-
-                  // values is the read-back block: reg 0x0001 (must be the just-written 0x1234) and reg 0x0002.
-                  if (values.size() >= 2) {
-                    id(client_read_0).publish_state(values[0]);
-                    id(client_read_1).publish_state(values[1]);
-                  }

tests/integration/fixtures/uart_mock_modbus_custom_pdu.yaml

@@ -1,88 +0,0 @@
-esphome:
-  name: uart-mock-modbus-custom-pdu
-
-host:
-api:
-logger:
-  level: VERBOSE
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
-# The actual UART bus used is the uart_mock component below
-uart:
-  baud_rate: 115200
-  port: /dev/null
-
-uart_mock:
-  - id: virtual_uart_server
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_controller
-              data: !lambda return data;
-  - id: virtual_uart_controller
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_server
-              data: !lambda return data;
-
-modbus:
-  - uart_id: virtual_uart_server
-    id: virtual_modbus_server
-    role: server
-  - uart_id: virtual_uart_controller
-    id: virtual_modbus_controller
-    role: client
-    turnaround_time: 10ms
-
-modbus_controller:
-  - address: 1
-    modbus_id: virtual_modbus_controller
-    id: modbus_controller_1
-    update_interval: 1s
-
-modbus_server:
-  - address: 1
-    modbus_id: virtual_modbus_server
-    id: modbus_server_1
-    registers:
-      - address: 0x01
-        value_type: U_WORD
-        read_lambda: return 259;
-
-sensor:
-  # Plain read to confirm the controller <-> server link is up.
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "plain_read"
-    address: 0x01
-    register_type: holding
-    value_type: U_WORD
-  # Custom PDU: read holding register 0x0001, count 1. The PDU is
-  # {function code, address hi, address lo, count hi, count lo}; the device
-  # address and CRC are added by the hub. The lambda parses the response payload
-  # (the register value, big-endian).
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "custom_read"
-    custom_pdu: [0x03, 0x00, 0x01, 0x00, 0x01]
-    lambda: |-
-      if (data.size() < 2) return {};
-      return (float) ((data[0] << 8) | data[1]);
-
-button:
-  - platform: template
-    name: "Start Scenario"
-    id: start_scenario_btn
-    # This test does not have anything to start (mock is autostart)

tests/integration/fixtures/uart_mock_modbus_deprecated_write_buffer.yaml

@@ -1,106 +0,0 @@
-esphome:
-  name: uart-mock-modbus-dep-buffer
-
-host:
-api:
-logger:
-  level: VERBOSE
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
-# The actual UART bus used is the uart_mock component below
-uart:
-  baud_rate: 115200
-  port: /dev/null
-
-uart_mock:
-  - id: virtual_uart_server
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_controller
-              data: !lambda return data;
-  - id: virtual_uart_controller
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_server
-              data: !lambda return data;
-
-globals:
-  - id: reg10
-    type: uint16_t
-    initial_value: "0"
-
-modbus:
-  - uart_id: virtual_uart_server
-    id: virtual_modbus_server
-    role: server
-  - uart_id: virtual_uart_controller
-    id: virtual_modbus_controller
-    role: client
-    turnaround_time: 10ms
-
-modbus_controller:
-  - address: 1
-    modbus_id: virtual_modbus_controller
-    id: modbus_controller_1
-    update_interval: 1s
-
-modbus_server:
-  - address: 1
-    modbus_id: virtual_modbus_server
-    id: modbus_server_1
-    registers:
-      - address: 0x10
-        value_type: U_WORD
-        read_lambda: return id(reg10);
-        write_lambda: |-
-          id(reg10) = x;
-          return true;
-
-# A number whose write_lambda uses the DEPRECATED buffer parameter (fills `payload` with a legacy raw
-# frame as words: device address + function code + data) instead of the new item->write_* API. The write
-# must still land with its legacy semantics, and the one-time deprecation warning must fire only once per
-# entity no matter how many writes happen.
-number:
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "buf_number"
-    id: buf_number
-    address: 0x10
-    register_type: holding
-    value_type: U_WORD
-    min_value: 0
-    max_value: 1000
-    step: 1
-    write_lambda: |-
-      // Legacy raw frame as words: [addr 0x01 | fc 0x06], register 0x0010, value.
-      payload.push_back(0x0106);
-      payload.push_back(0x0010);
-      payload.push_back((uint16_t) x);
-      return {};
-
-# Reports the server-side register so the test can observe that the deprecated buffer write landed.
-sensor:
-  - platform: template
-    name: "written_value"
-    id: written_value
-    update_interval: 0.5s
-    lambda: "return id(reg10);"
-
-button:
-  - platform: template
-    name: "Start Scenario"
-    id: start_scenario_btn
-    # The test drives the writes via number_command; the mock is autostart.

tests/integration/fixtures/uart_mock_modbus_lambda_invert.yaml

@@ -1,95 +0,0 @@
-esphome:
-  name: uart-mock-modbus-lambda-invert
-
-host:
-api:
-logger:
-  level: VERBOSE
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
-# The actual UART bus used is the uart_mock component below
-uart:
-  baud_rate: 115200
-  port: /dev/null
-
-uart_mock:
-  - id: virtual_uart_server
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_controller
-              data: !lambda return data;
-  - id: virtual_uart_controller
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_server
-              data: !lambda return data;
-
-globals:
-  - id: reg40
-    type: uint16_t
-    initial_value: "5"
-
-modbus:
-  - uart_id: virtual_uart_server
-    id: virtual_modbus_server
-    role: server
-  - uart_id: virtual_uart_controller
-    id: virtual_modbus_controller
-    role: client
-    turnaround_time: 10ms
-
-modbus_controller:
-  - address: 1
-    modbus_id: virtual_modbus_controller
-    id: modbus_controller_1
-    update_interval: 1s
-
-modbus_server:
-  - address: 1
-    modbus_id: virtual_modbus_server
-    id: modbus_server_1
-    registers:
-      - address: 0x40
-        value_type: U_WORD
-        read_lambda: return id(reg40);
-        write_lambda: id(reg40) = x; return true;
-
-# An active-low holding switch: the write_lambda inverts the wire value, but the entity must still
-# report the REQUESTED state. assumed_state keeps the register unpolled, so the published state comes
-# only from write_state() - turning ON writes 0x0000 yet the switch shows ON.
-switch:
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "invert_switch"
-    register_type: holding
-    address: 0x40
-    assumed_state: true
-    write_lambda: |-
-      return !x;
-
-sensor:
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "reg_40"
-    address: 0x40
-    register_type: holding
-    value_type: U_WORD
-
-button:
-  - platform: template
-    name: "Start Scenario"
-    id: start_scenario_btn
-    # This test does not have anything to start (mock is autostart)

tests/integration/fixtures/uart_mock_modbus_lambda_write.yaml

@@ -1,97 +0,0 @@
-esphome:
-  name: uart-mock-modbus-lambda-write
-
-host:
-api:
-logger:
-  level: VERBOSE
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
-# The actual UART bus used is the uart_mock component below
-uart:
-  baud_rate: 115200
-  port: /dev/null
-
-uart_mock:
-  - id: virtual_uart_server
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_controller
-              data: !lambda return data;
-  - id: virtual_uart_controller
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_server
-              data: !lambda return data;
-
-globals:
-  - id: reg30
-    type: uint16_t
-    initial_value: "0"
-
-modbus:
-  - uart_id: virtual_uart_server
-    id: virtual_modbus_server
-    role: server
-  - uart_id: virtual_uart_controller
-    id: virtual_modbus_controller
-    role: client
-    turnaround_time: 10ms
-
-modbus_controller:
-  - address: 1
-    modbus_id: virtual_modbus_controller
-    id: modbus_controller_1
-    update_interval: 1s
-
-modbus_server:
-  - address: 1
-    modbus_id: virtual_modbus_server
-    id: modbus_server_1
-    registers:
-      - address: 0x30
-        value_type: U_WORD
-        read_lambda: return id(reg30);
-        write_lambda: id(reg30) = x; return true;
-
-# A COIL-type switch (assumed_state, write-only) whose write_lambda ignores its own coil type and instead
-# drives a HOLDING-REGISTER write on the mock server through the entity itself: `item` IS the command, so
-# item->write_single_register() sends a register write from a coil entity (cross-type). Returning nothing
-# (an empty optional) tells the write path the lambda already dispatched the frame - no default coil write.
-switch:
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "cross_switch"
-    register_type: coil
-    address: 0x00
-    assumed_state: true
-    write_lambda: |-
-      item->write_single_register(0x30, x ? 1234 : 0);
-      return {};
-
-sensor:
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "reg_30"
-    address: 0x30
-    register_type: holding
-    value_type: U_WORD
-
-button:
-  - platform: template
-    name: "Start Scenario"
-    id: start_scenario_btn
-    # This test does not have anything to start (mock is autostart)

tests/integration/fixtures/uart_mock_modbus_loopback.yaml

@@ -0,0 +1,233 @@
+esphome:
+  name: uart-mock-modbus-loopback
+
+host:
+api:
+logger:
+  level: VERBOSE
+
+external_components:
+  - source:
+      type: local
+      path: EXTERNAL_COMPONENT_PATH
+
+# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
+# The actual UART bus used is the uart_mock component below
+uart:
+  baud_rate: 115200
+  port: /dev/null
+
+# Shared loopback fixture (see the shared_yaml markers in the test file);
+# register spaces are disjoint so each test only observes its own entities.
+uart_mock:
+  - id: virtual_uart_server
+    baud_rate: 9600
+    auto_start: true
+    debug:
+    on_tx:
+      - then:
+          - uart_mock.inject_rx:
+              id: virtual_uart_controller
+              data: !lambda return data;
+  - id: virtual_uart_controller
+    baud_rate: 9600
+    auto_start: true
+    debug:
+    on_tx:
+      - then:
+          - uart_mock.inject_rx:
+              id: virtual_uart_server
+              data: !lambda return data;
+
+globals:
+  - id: reg10
+    type: uint16_t
+    initial_value: "100"
+  - id: reg11
+    type: uint16_t
+    initial_value: "200"
+  - id: reg12
+    type: uint16_t
+    initial_value: "300"
+  - id: reg13
+    type: uint16_t
+    initial_value: "0xABCD"
+  - id: reg30
+    type: uint16_t
+    initial_value: "0"
+  - id: reg40
+    type: uint16_t
+    initial_value: "5"
+  - id: reg50
+    type: uint16_t
+    initial_value: "0"
+
+modbus:
+  - uart_id: virtual_uart_server
+    id: virtual_modbus_server
+    role: server
+  - uart_id: virtual_uart_controller
+    id: virtual_modbus_controller
+    role: client
+    turnaround_time: 10ms
+
+modbus_controller:
+  - address: 1
+    modbus_id: virtual_modbus_controller
+    id: modbus_controller_1
+    update_interval: 1s
+
+modbus_server:
+  - address: 1
+    modbus_id: virtual_modbus_server
+    registers:
+      - address: 0x01
+        value_type: U_WORD
+        read_lambda: return 259;
+      - address: 0x10
+        value_type: U_WORD
+        read_lambda: return id(reg10);
+        write_lambda: id(reg10) = x; return true;
+      - address: 0x11
+        value_type: U_WORD
+        read_lambda: return id(reg11);
+        write_lambda: id(reg11) = x; return true;
+      - address: 0x12
+        value_type: U_WORD
+        read_lambda: return id(reg12);
+        write_lambda: id(reg12) = x; return true;
+      - address: 0x13
+        value_type: U_WORD
+        read_lambda: return id(reg13);
+      - address: 0x30
+        value_type: U_WORD
+        read_lambda: return id(reg30);
+        write_lambda: id(reg30) = x; return true;
+      - address: 0x40
+        value_type: U_WORD
+        read_lambda: return id(reg40);
+        write_lambda: id(reg40) = x; return true;
+      - address: 0x50
+        value_type: U_WORD
+        read_lambda: return id(reg50);
+        write_lambda: id(reg50) = x; return true;
+
+# Byte-based offset: 2 bytes -> register 0x11 (the old code folded it in as a
+# register count, hitting 0x12). assumed_state keeps the switch write-only.
+switch:
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_1
+    name: "offset_switch"
+    register_type: holding
+    address: 0x10
+    offset: 2
+    assumed_state: true
+  # Reading switch, byte offset 6 -> register 0x13; the pre-fix resolution (0x16)
+  # would draw ILLEGAL_DATA_ADDRESS and never publish.
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_1
+    name: "read_offset_switch"
+    register_type: holding
+    address: 0x10
+    offset: 6
+    bitmask: 0x1
+  # Coil switch whose write_lambda dispatches a holding-register write via `item`;
+  # returning an empty optional suppresses the default coil write.
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_1
+    name: "cross_switch"
+    register_type: coil
+    address: 0x00
+    assumed_state: true
+    write_lambda: |-
+      item->write_single_register(0x30, x ? 1234 : 0);
+      return {};
+  # Active-low: the write_lambda inverts the wire value but the entity must still
+  # report the requested state (assumed_state keeps the register unpolled).
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_1
+    name: "invert_switch"
+    register_type: holding
+    address: 0x40
+    assumed_state: true
+    write_lambda: |-
+      return !x;
+
+# Uses the deprecated buffer parameter (legacy raw frame as words); the write
+# must land and the deprecation warning must fire only once per entity.
+number:
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_1
+    name: "buf_number"
+    id: buf_number
+    address: 0x50
+    register_type: holding
+    value_type: U_WORD
+    min_value: 0
+    max_value: 1000
+    step: 1
+    write_lambda: |-
+      // Legacy raw frame as words: [addr 0x01 | fc 0x06], register 0x0050, value.
+      payload.push_back(0x0106);
+      payload.push_back(0x0050);
+      payload.push_back((uint16_t) x);
+      return {};
+
+sensor:
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_1
+    name: "plain_read"
+    address: 0x01
+    register_type: holding
+    value_type: U_WORD
+  # Custom PDU: read holding register 0x0001; device address and CRC are added
+  # by the hub. The lambda parses the big-endian register value.
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_1
+    name: "custom_read"
+    custom_pdu: [0x03, 0x00, 0x01, 0x00, 0x01]
+    lambda: |-
+      if (data.size() < 2) return {};
+      return (float) ((data[0] << 8) | data[1]);
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_1
+    name: "reg_10"
+    address: 0x10
+    register_type: holding
+    value_type: U_WORD
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_1
+    name: "reg_11"
+    address: 0x11
+    register_type: holding
+    value_type: U_WORD
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_1
+    name: "reg_12"
+    address: 0x12
+    register_type: holding
+    value_type: U_WORD
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_1
+    name: "reg_30"
+    address: 0x30
+    register_type: holding
+    value_type: U_WORD
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_1
+    name: "reg_40"
+    address: 0x40
+    register_type: holding
+    value_type: U_WORD
+  # Reports the server-side register so the test can observe that the deprecated buffer write landed.
+  - platform: template
+    name: "written_value"
+    id: written_value
+    update_interval: 0.5s
+    lambda: "return id(reg50);"
+
+button:
+  - platform: template
+    name: "Start Scenario"
+    id: start_scenario_btn
+    # Nothing to start (mock is autostart); tests drive entities directly

tests/integration/fixtures/uart_mock_modbus_mesh.yaml

@@ -1,5 +1,5 @@
 esphome:
-  name: uart-mock-modbus-server-contro
+  name: uart-mock-modbus-mesh
 
 host:
 api:
@@ -17,13 +17,14 @@ uart:
   baud_rate: 115200
   port: /dev/null
 
+# Shared 3-bus mesh (see the shared_yaml markers): addr 1 = typed read-only
+# registers, addr 5 = the read/write 0x17 target, addr 2/3 on the second
+# server hub. auto_start everywhere: the controller polls at boot, so the
+# forwarding must already be live or early requests generate warnings.
+# Every test presses Start Scenario, so all merged actions fire in every test.
 uart_mock:
   - id: virtual_uart_server
     baud_rate: 9600
-    # auto_start must be true for loopback fixtures: the modbus controller
-    # polls on its update_interval immediately at boot, so the uart_mock
-    # forwarding must already be active or early requests are lost and
-    # generate modbus warnings.
     auto_start: true
     debug:
     on_tx:
@@ -31,35 +32,68 @@ uart_mock:
           - uart_mock.inject_rx:
               id: virtual_uart_controller
               data: !lambda return data;
-  - id: virtual_uart_controller
+          - uart_mock.inject_rx:
+              id: virtual_uart_server_2
+              data: !lambda return data;
+  - id: virtual_uart_server_2
     baud_rate: 9600
-    auto_start: true # See comment on virtual_uart_server above
+    auto_start: true
     debug:
     on_tx:
       - then:
           - uart_mock.inject_rx:
               id: virtual_uart_server
               data: !lambda return data;
+          - uart_mock.inject_rx:
+              id: virtual_uart_controller
+              data: !lambda return data;
+  - id: virtual_uart_controller
+    baud_rate: 9600
+    auto_start: true
+    debug:
+    on_tx:
+      - then:
+          - uart_mock.inject_rx:
+              id: virtual_uart_server
+              data: !lambda return data;
+          - uart_mock.inject_rx:
+              id: virtual_uart_server_2
+              data: !lambda return data;
+
+globals:
+  - id: stored_1
+    type: uint16_t
+    initial_value: "0"
 
 modbus:
   - uart_id: virtual_uart_server
     id: virtual_modbus_server
     role: server
+  - uart_id: virtual_uart_server_2
+    id: virtual_modbus_server_2
+    role: server
   - uart_id: virtual_uart_controller
-    id: virtual_modbus_controller
+    id: virtual_modbus_client
     role: client
     turnaround_time: 10ms
 
 modbus_controller:
   - address: 1
-    modbus_id: virtual_modbus_controller
+    modbus_id: virtual_modbus_client
     id: modbus_controller_1
     update_interval: 1s
+  - address: 2
+    modbus_id: virtual_modbus_client
+    id: modbus_controller_2
+    update_interval: 1s
+  - address: 3
+    modbus_id: virtual_modbus_client
+    id: modbus_controller_3
+    update_interval: 1s
 
 modbus_server:
   - address: 1
     modbus_id: virtual_modbus_server
-    id: modbus_server_1
     registers:
       - address: 0x01
         value_type: U_WORD
@@ -103,6 +137,34 @@ modbus_server:
       - address: 0x28
         value_type: FP32_R
         read_lambda: return 3.14;
+  - address: 5
+    modbus_id: virtual_modbus_server
+    registers:
+      # Writable + readable register: srv_write_1 plus the client's read-back
+      # confirm the write half of the 0x17 ran before the read half (Modbus 6.17).
+      - address: 0x01
+        value_type: U_WORD
+        read_lambda: return id(stored_1);
+        write_lambda: |-
+          id(stored_1) = x;
+          id(srv_write_1).publish_state(x);
+          return true;
+      # Read-only register, returned together with 0x01 by the 2-register read half.
+      - address: 0x02
+        value_type: U_WORD
+        read_lambda: return 0x00AA;
+  - address: 2
+    modbus_id: virtual_modbus_server_2
+    registers:
+      - address: 0x01
+        value_type: U_WORD
+        read_lambda: return 919;
+  - address: 3
+    modbus_id: virtual_modbus_server_2
+    registers:
+      - address: 0x01
+        value_type: U_WORD
+        read_lambda: return 929;
 
 sensor:
   - platform: modbus_controller
@@ -195,9 +257,46 @@ sensor:
     address: 0x28
     register_type: holding
     value_type: FP32_R
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_2
+    name: "multi_reg_a"
+    address: 0x01
+    register_type: holding
+    value_type: U_WORD
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_3
+    name: "multi_reg_b"
+    address: 0x01
+    register_type: holding
+    value_type: U_WORD
+  # client_read_write observations, server- and client-side.
+  - platform: template
+    name: "srv_write_1"
+    id: srv_write_1
+  - platform: template
+    name: "client_read_0"
+    id: client_read_0
+  - platform: template
+    name: "client_read_1"
+    id: client_read_1
 
 button:
   - platform: template
     name: "Start Scenario"
     id: start_scenario_btn
-    # This test does not have anything to start (mock is autostart)
+    on_press:
+      # FC 0x17: write reg 0x0001 = 0x1234, then read regs 0x0001..0x0002 back in the same transaction.
+      - modbus_client.read_write_multiple_registers:
+          address: 5
+          read_address: 0x0001
+          read_count: 2
+          write_address: 0x0001
+          values: [0x1234]
+          on_response:
+            then:
+              - lambda: |-
+                  // values is the read-back block: reg 0x0001 (must be the just-written 0x1234) and reg 0x0002.
+                  if (values.size() >= 2) {
+                    id(client_read_0).publish_state(values[0]);
+                    id(client_read_1).publish_state(values[1]);
+                  }

tests/integration/fixtures/uart_mock_modbus_register_offset.yaml

@@ -1,138 +0,0 @@
-esphome:
-  name: uart-mock-modbus-reg-offset
-
-host:
-api:
-logger:
-  level: VERBOSE
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
-# The actual UART bus used is the uart_mock component below
-uart:
-  baud_rate: 115200
-  port: /dev/null
-
-uart_mock:
-  - id: virtual_uart_server
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_controller
-              data: !lambda return data;
-  - id: virtual_uart_controller
-    baud_rate: 9600
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_server
-              data: !lambda return data;
-
-globals:
-  - id: reg10
-    type: uint16_t
-    initial_value: "100"
-  - id: reg11
-    type: uint16_t
-    initial_value: "200"
-  - id: reg12
-    type: uint16_t
-    initial_value: "300"
-  - id: reg13
-    type: uint16_t
-    initial_value: "0xABCD"
-
-modbus:
-  - uart_id: virtual_uart_server
-    id: virtual_modbus_server
-    role: server
-  - uart_id: virtual_uart_controller
-    id: virtual_modbus_controller
-    role: client
-    turnaround_time: 10ms
-
-modbus_controller:
-  - address: 1
-    modbus_id: virtual_modbus_controller
-    id: modbus_controller_1
-    update_interval: 1s
-
-modbus_server:
-  - address: 1
-    modbus_id: virtual_modbus_server
-    id: modbus_server_1
-    registers:
-      - address: 0x10
-        value_type: U_WORD
-        read_lambda: return id(reg10);
-        write_lambda: id(reg10) = x; return true;
-      - address: 0x11
-        value_type: U_WORD
-        read_lambda: return id(reg11);
-        write_lambda: id(reg11) = x; return true;
-      - address: 0x12
-        value_type: U_WORD
-        read_lambda: return id(reg12);
-        write_lambda: id(reg12) = x; return true;
-      - address: 0x13
-        value_type: U_WORD
-        read_lambda: return id(reg13);
-        write_lambda: id(reg13) = x; return true;
-
-# A holding-register switch at 0x10 with a 2-BYTE offset. offset is byte-based, so the write must target
-# register 0x10 + 2/2 = 0x11. The old (pre-fix) behavior folded offset into the address as a register
-# count, hitting 0x12 instead. assumed_state keeps the switch write-only so it does not read any register.
-switch:
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "offset_switch"
-    register_type: holding
-    address: 0x10
-    offset: 2
-    assumed_state: true
-  # A holding-register switch that READS its state. Byte offset 6 -> register 0x10 + 6/2 = 0x13. Post-fix
-  # the switch itself resolves to 0x13 (the even byte offset folds into the address as whole registers) and
-  # joins the 0x10..0x13 range, so no separate 0x13 sensor is needed. Pre-fix the whole byte offset folds
-  # into the address (0x16), where the server answers ILLEGAL_DATA_ADDRESS and the switch never publishes.
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "read_offset_switch"
-    register_type: holding
-    address: 0x10
-    offset: 6
-    bitmask: 0x1
-
-sensor:
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "reg_10"
-    address: 0x10
-    register_type: holding
-    value_type: U_WORD
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "reg_11"
-    address: 0x11
-    register_type: holding
-    value_type: U_WORD
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "reg_12"
-    address: 0x12
-    register_type: holding
-    value_type: U_WORD
-
-button:
-  - platform: template
-    name: "Start Scenario"
-    id: start_scenario_btn
-    # This test does not have anything to start (mock is autostart)

tests/integration/fixtures/uart_mock_modbus_server.yaml

@@ -1,124 +0,0 @@
-esphome:
-  name: uart-mock-modbus-server-test
-
-host:
-api:
-logger:
-  level: VERBOSE
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
-# The actual UART bus used is the uart_mock component below
-uart:
-  baud_rate: 115200
-  port: /dev/null
-
-uart_mock:
-  - id: virtual_uart_dev
-    baud_rate: 9600
-    rx_full_threshold: 120
-    rx_timeout: 2
-    auto_start: false
-    debug:
-    injections:
-      - delay: 100ms
-        inject_rx: [0x01, 0x03, 0x00, 0x03, 0x00, 0x01, 0x74, 0x0A] #  Read holding register 3 on device 1 (basic_read)
-      - delay: 100ms
-        #  Read holding register 7 on device 2
-        #  Reply from device 2
-        #  Read holding register 5 on device 1 (read_after_peer_response)
-        inject_rx:
-          [
-            0x02,
-            0x03,
-            0x00,
-            0x07,
-            0x00,
-            0x01,
-            0x35,
-            0xF8,
-            0x02,
-            0x03,
-            0x02,
-            0x00,
-            0xF0,
-            0xFC,
-            0x00,
-            0x01,
-            0x03,
-            0x00,
-            0x05,
-            0x00,
-            0x01,
-            0x94,
-            0x0B,
-          ]
-      - delay: 100ms
-        inject_rx: [0x02, 0x03, 0x00, 0x07, 0x00, 0x01, 0x35, 0xF8] #  Read holding register 7 on device 2, with no response
-      - delay: 100ms
-        #  Read holding register 7 on device 2, with no response
-        #  Read holding register A on device 1 (read_after_peer_timeout)
-        inject_rx:
-          [
-            0x02,
-            0x03,
-            0x00,
-            0x07,
-            0x00,
-            0x01,
-            0x35,
-            0xF8,
-            0x01,
-            0x03,
-            0x00,
-            0x0A,
-            0x00,
-            0x01,
-            0xA4,
-            0x08,
-          ]
-
-modbus:
-  uart_id: virtual_uart_dev
-  role: server
-
-modbus_server:
-  - address: 1
-    registers:
-      - address: 0x03
-        value_type: U_WORD
-        read_lambda: |-
-          id(basic_read).publish_state(1);
-          return 1;
-      - address: 0x05
-        value_type: U_WORD
-        read_lambda: |-
-          id(read_after_peer_response).publish_state(1);
-          return 1;
-      - address: 0x0A
-        value_type: U_WORD
-        read_lambda: |-
-          id(read_after_peer_timeout).publish_state(1);
-          return 1;
-
-sensor:
-  - platform: template
-    name: "basic_read"
-    id: basic_read
-  - platform: template
-    name: "read_after_peer_response"
-    id: read_after_peer_response
-  - platform: template
-    name: "read_after_peer_timeout"
-    id: read_after_peer_timeout
-
-button:
-  - platform: template
-    name: "Start Scenario"
-    id: start_scenario_btn
-    on_press:
-      - lambda: "id(virtual_uart_dev).start_scenario();"

tests/integration/fixtures/uart_mock_modbus_server_controller_multiple.yaml

@@ -1,116 +0,0 @@
-esphome:
-  name: uart-mock-modbus-server-mult
-
-host:
-api:
-logger:
-  level: VERBOSE
-
-external_components:
-  - source:
-      type: local
-      path: EXTERNAL_COMPONENT_PATH
-
-# Dummy uart entry to satisfy modbus's DEPENDENCIES = ["uart"]
-# The actual UART bus used is the uart_mock component below
-uart:
-  baud_rate: 115200
-  port: /dev/null
-
-uart_mock:
-  - id: virtual_uart_server
-    baud_rate: 9600
-    # auto_start must be true for loopback fixtures: the modbus controller
-    # polls on its update_interval immediately at boot, so the uart_mock
-    # forwarding must already be active or early requests are lost and
-    # generate modbus warnings.
-    auto_start: true
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_controller
-              data: !lambda return data;
-          - uart_mock.inject_rx:
-              id: virtual_uart_server_2
-              data: !lambda return data;
-  - id: virtual_uart_server_2
-    baud_rate: 9600
-    auto_start: true # See comment on virtual_uart_server above
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_server
-              data: !lambda return data;
-          - uart_mock.inject_rx:
-              id: virtual_uart_controller
-              data: !lambda return data;
-  - id: virtual_uart_controller
-    baud_rate: 9600
-    auto_start: true # See comment on virtual_uart_server above
-    debug:
-    on_tx:
-      - then:
-          - uart_mock.inject_rx:
-              id: virtual_uart_server
-              data: !lambda return data;
-          - uart_mock.inject_rx:
-              id: virtual_uart_server_2
-              data: !lambda return data;
-
-modbus:
-  - uart_id: virtual_uart_server
-    id: virtual_modbus_server
-    role: server
-  - uart_id: virtual_uart_server_2
-    id: virtual_modbus_server_2
-    role: server
-  - uart_id: virtual_uart_controller
-    id: virtual_modbus_client
-    role: client
-    turnaround_time: 10ms
-
-modbus_controller:
-  - address: 1
-    modbus_id: virtual_modbus_client
-    update_interval: 1s
-    id: modbus_controller_1
-  - address: 2
-    modbus_id: virtual_modbus_client
-    update_interval: 1s
-    id: modbus_controller_2
-
-modbus_server:
-  - address: 1
-    modbus_id: virtual_modbus_server
-    registers:
-      - address: 0x01
-        value_type: U_WORD
-        read_lambda: return 919;
-  - address: 2
-    modbus_id: virtual_modbus_server_2
-    registers:
-      - address: 0x01
-        value_type: U_WORD
-        read_lambda: return 929;
-
-sensor:
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_1
-    name: "reg_u_word"
-    address: 0x01
-    register_type: holding
-    value_type: U_WORD
-  - platform: modbus_controller
-    modbus_controller_id: modbus_controller_2
-    name: "reg_u_word_2"
-    address: 0x01
-    register_type: holding
-    value_type: U_WORD
-
-button:
-  - platform: template
-    name: "Start Scenario"
-    id: start_scenario_btn
-    # This test does not have anything to start (mock is autostart)

tests/integration/fixtures/uart_mock_modbus_server_injected.yaml

@@ -1,5 +1,5 @@
 esphome:
-  name: uart-mock-modbus-srv-rw
+  name: uart-mock-modbus-srv-injected
 
 host:
 api:
@@ -17,6 +17,8 @@ uart:
   baud_rate: 115200
   port: /dev/null
 
+# Shared server-role fixture (see the shared_yaml markers in the test file);
+# the injections concatenate and each test waits only on its own sensors.
 uart_mock:
   - id: virtual_uart_dev
     baud_rate: 9600
@@ -25,18 +27,31 @@ uart_mock:
     auto_start: false
     debug:
     injections:
-      # FC 0x17 Read/Write Multiple Registers on device 1:
-      #   write reg 0x0001 = 0x1234 (qty 1), then read regs 0x0001..0x0002 (qty 2).
-      # Per Modbus 6.17 the write is performed before the read, so reg 0x0001 must
-      # read back the just-written 0x1234 in the same request.
+      - delay: 100ms
+        inject_rx: [0x01, 0x03, 0x00, 0x03, 0x00, 0x01, 0x74, 0x0A] #  Read holding register 3 on device 1 (basic_read)
+      - delay: 100ms
+        #  Read holding register 7 on device 2, its reply, then read holding
+        #  register 5 on device 1 (read_after_peer_response)
+        inject_rx: [0x02, 0x03, 0x00, 0x07, 0x00, 0x01, 0x35, 0xF8,
+                    0x02, 0x03, 0x02, 0x00, 0xF0, 0xFC,
+                    0x00, 0x01, 0x03, 0x00, 0x05, 0x00, 0x01, 0x94, 0x0B]
+      - delay: 100ms
+        inject_rx: [0x02, 0x03, 0x00, 0x07, 0x00, 0x01, 0x35, 0xF8] #  Read holding register 7 on device 2, with no response
+      - delay: 100ms
+        #  Read holding register 7 on device 2 with no response, then read
+        #  holding register A on device 1 (read_after_peer_timeout)
+        inject_rx: [0x02, 0x03, 0x00, 0x07, 0x00, 0x01, 0x35, 0xF8,
+                    0x01, 0x03, 0x00, 0x0A, 0x00, 0x01, 0xA4, 0x08]
+      # FC 0x17 on device 1: write reg 0x0001 = 0x1234 then read 0x0001..0x0002;
+      # per Modbus 6.17 the write runs first, so 0x0001 must read back 0x1234.
       - delay: 100ms
         inject_rx:
           [0x01, 0x17, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x01, 0x02, 0x12, 0x34, 0x49, 0xD8]
-      # FC 0x17: write reg 0x0003 = 0x5678 (qty 1), then read reg 0x0003 (qty 1) -
+      # FC 0x17: write reg 0x0006 = 0x5678 (qty 1), then read reg 0x0006 (qty 1) -
       # a write and read targeting a different register block.
       - delay: 100ms
         inject_rx:
-          [0x01, 0x17, 0x00, 0x03, 0x00, 0x01, 0x00, 0x03, 0x00, 0x01, 0x02, 0x56, 0x78, 0x9B, 0x10]
+          [0x01, 0x17, 0x00, 0x06, 0x00, 0x01, 0x00, 0x06, 0x00, 0x01, 0x02, 0x56, 0x78, 0x8B, 0x55]
 
 globals:
   - id: stored_1
@@ -70,8 +85,18 @@ modbus_server:
         read_lambda: |-
           id(rw_read_2).publish_state(0x00AA);
           return 0x00AA;
-      # Second writable + readable register, targeted by the second request.
       - address: 0x03
+        value_type: U_WORD
+        read_lambda: |-
+          id(basic_read).publish_state(1);
+          return 1;
+      - address: 0x05
+        value_type: U_WORD
+        read_lambda: |-
+          id(read_after_peer_response).publish_state(1);
+          return 1;
+      # Second writable + readable register, targeted by the second FC 0x17 request.
+      - address: 0x06
         value_type: U_WORD
         read_lambda: |-
           id(rw_read_3).publish_state(id(stored_3));
@@ -80,8 +105,22 @@ modbus_server:
           id(stored_3) = x;
           id(rw_write_3).publish_state(x);
           return true;
+      - address: 0x0A
+        value_type: U_WORD
+        read_lambda: |-
+          id(read_after_peer_timeout).publish_state(1);
+          return 1;
 
 sensor:
+  - platform: template
+    name: "basic_read"
+    id: basic_read
+  - platform: template
+    name: "read_after_peer_response"
+    id: read_after_peer_response
+  - platform: template
+    name: "read_after_peer_timeout"
+    id: read_after_peer_timeout
   - platform: template
     name: "rw_write_1"
     id: rw_write_1

tests/integration/host_prefs.py

@@ -1,7 +1,7 @@
 """Helpers for manipulating the host platform's preferences file.
 
 ESPHome's host platform stores preferences in
-``~/.esphome/prefs/<app_name>.prefs`` using a simple binary layout that
+``$ESPHOME_PREFDIR/<app_name>.prefs`` using a simple binary layout that
 mirrors ``HostPreferences::sync()``:
 ``[uint32_t key][uint8_t len][uint8_t data[len]]`` per entry.
 
@@ -11,13 +11,21 @@ boot (e.g. forcing safe mode) or to clear stale state between runs.
 
 from __future__ import annotations
 
+import os
 from pathlib import Path
 import struct
 
 
 def host_prefs_path(device_name: str) -> Path:
-    """Return the on-disk prefs file path for a host-platform device."""
-    return Path.home() / ".esphome" / "prefs" / f"{device_name}.prefs"
+    """Return the on-disk prefs file path for a host-platform device.
+
+    Requires ESPHOME_PREFDIR, which the autouse isolated_preferences fixture
+    sets; refusing the ~/.esphome/prefs fallback keeps tests off real user
+    data if the fixture is ever bypassed."""
+    prefdir = os.environ.get("ESPHOME_PREFDIR")
+    if not prefdir:
+        raise RuntimeError("ESPHOME_PREFDIR is not set; refusing the real prefs dir")
+    return Path(prefdir) / f"{device_name}.prefs"
 
 
 def clear_host_prefs(device_name: str) -> None:

tests/integration/integration_test_durations.json

@@ -1,143 +1,154 @@
 {
-  "tests/integration/test_action_concurrent_reentry.py": 57.91,
-  "tests/integration/test_addressable_light_transition.py": 21.25,
-  "tests/integration/test_alarm_control_panel_state_transitions.py": 70.71,
-  "tests/integration/test_api_action_metadata.py": 66.6,
-  "tests/integration/test_api_action_responses.py": 36.1,
-  "tests/integration/test_api_action_timeout.py": 68.86,
-  "tests/integration/test_api_conditional_memory.py": 15.48,
-  "tests/integration/test_api_custom_services.py": 18.77,
-  "tests/integration/test_api_get_time_response_timezone.py": 21.08,
-  "tests/integration/test_api_homeassistant.py": 65.59,
-  "tests/integration/test_api_homeassistant_action_no_subscriber.py": 18.44,
-  "tests/integration/test_api_homeassistant_binary_sensor_initial_state.py": 15.05,
-  "tests/integration/test_api_list_entities_backpressure.py": 13.88,
-  "tests/integration/test_api_message_size_batching.py": 29.98,
-  "tests/integration/test_api_reboot_timeout.py": 16.05,
-  "tests/integration/test_api_string_lambda.py": 15.31,
-  "tests/integration/test_api_vv_logging.py": 19.28,
-  "tests/integration/test_api_zero_psk_provisioning.py": 31.5,
-  "tests/integration/test_areas_and_devices.py": 24.95,
-  "tests/integration/test_automation_wait_actions.py": 20.92,
-  "tests/integration/test_automations.py": 35.19,
-  "tests/integration/test_batch_delay_zero_rapid_transitions.py": 17.99,
-  "tests/integration/test_binary_sensor_autorepeat_filter.py": 20.39,
-  "tests/integration/test_binary_sensor_invalidate_state.py": 18.41,
-  "tests/integration/test_blocking_warning_log_time_not_charged_to_next_operation.py": 24.69,
-  "tests/integration/test_build_info.py": 18.7,
-  "tests/integration/test_camera_mock.py": 16.23,
-  "tests/integration/test_climate_control_action.py": 21.14,
-  "tests/integration/test_climate_custom_modes.py": 20.74,
-  "tests/integration/test_continuation_actions.py": 16.81,
-  "tests/integration/test_cover_control_action.py": 20.34,
-  "tests/integration/test_crc8_helper.py": 9.36,
-  "tests/integration/test_device_id_in_state.py": 44.67,
-  "tests/integration/test_duplicate_entities.py": 23.58,
-  "tests/integration/test_entity_icon.py": 34.35,
-  "tests/integration/test_fan_turn_on_action.py": 24.23,
-  "tests/integration/test_fnv1_hash_object_id.py": 16.21,
-  "tests/integration/test_fnv1a_hash.py": 13.38,
-  "tests/integration/test_gpio_expander_cache.py": 13.06,
-  "tests/integration/test_host_logger_thread_safety.py": 23.66,
-  "tests/integration/test_host_mode_basic.py": 8.01,
-  "tests/integration/test_host_mode_batch_delay.py": 21.0,
-  "tests/integration/test_host_mode_climate_basic_state.py": 22.14,
-  "tests/integration/test_host_mode_climate_control.py": 19.39,
-  "tests/integration/test_host_mode_empty_string_options.py": 21.76,
-  "tests/integration/test_host_mode_entity_fields.py": 29.61,
-  "tests/integration/test_host_mode_fan_preset.py": 20.01,
-  "tests/integration/test_host_mode_many_entities.py": 39.08,
-  "tests/integration/test_host_mode_many_entities_multiple_connections.py": 23.92,
-  "tests/integration/test_host_mode_noise_encryption.py": 42.42,
-  "tests/integration/test_host_mode_reconnect.py": 3.41,
-  "tests/integration/test_host_mode_sensor.py": 22.96,
-  "tests/integration/test_host_ota.py": 29.5,
-  "tests/integration/test_host_preferences.py": 16.06,
-  "tests/integration/test_host_preferences_suspend_resume.py": 18.71,
-  "tests/integration/test_improv_serial_uart.py": 20.22,
-  "tests/integration/test_large_message_batching.py": 26.56,
-  "tests/integration/test_legacy_area.py": 22.72,
-  "tests/integration/test_legacy_climate_compat.py": 14.13,
-  "tests/integration/test_legacy_fan_compat.py": 14.33,
-  "tests/integration/test_light_automations.py": 18.81,
-  "tests/integration/test_light_binary_effect_off_phase.py": 8.38,
-  "tests/integration/test_light_calls.py": 21.88,
-  "tests/integration/test_light_constant_brightness.py": 59.45,
-  "tests/integration/test_light_control_action.py": 31.91,
-  "tests/integration/test_light_dim_relative_action.py": 14.43,
-  "tests/integration/test_light_effect_zero_brightness.py": 25.05,
-  "tests/integration/test_light_initial_state.py": 18.97,
-  "tests/integration/test_light_toggle_action.py": 17.44,
-  "tests/integration/test_lock_automations.py": 18.9,
-  "tests/integration/test_logger_buffered_recursion_guard.py": 18.2,
-  "tests/integration/test_loop_disable_enable.py": 63.35,
-  "tests/integration/test_loop_interval_decoupling.py": 17.7,
-  "tests/integration/test_loop_interval_default_not_pulled_forward.py": 21.56,
-  "tests/integration/test_micros_to_millis.py": 15.89,
-  "tests/integration/test_multi_click_trigger.py": 17.23,
-  "tests/integration/test_multi_device_preferences.py": 19.4,
-  "tests/integration/test_noise_encryption_key_protection.py": 72.59,
-  "tests/integration/test_object_id_api_verification.py": 19.22,
-  "tests/integration/test_object_id_friendly_name_no_mac_suffix.py": 16.77,
-  "tests/integration/test_object_id_no_friendly_name.py": 45.8,
-  "tests/integration/test_online_image_auto_detects_image_bmp_mime.py": 86.73,
-  "tests/integration/test_online_image_auto_detects_redirected_image_bmp_mime.py": 40.4,
-  "tests/integration/test_online_image_bmp.py": 37.24,
-  "tests/integration/test_oversized_payloads.py": 55.75,
-  "tests/integration/test_preference_key_stability.py": 25.49,
-  "tests/integration/test_runtime_stats.py": 29.81,
-  "tests/integration/test_safe_mode_loop_runs.py": 6.26,
-  "tests/integration/test_scheduler_blocking_warning.py": 37.98,
-  "tests/integration/test_scheduler_bulk_cleanup.py": 18.67,
-  "tests/integration/test_scheduler_defer_cancel.py": 18.46,
-  "tests/integration/test_scheduler_defer_cancel_regular.py": 16.34,
-  "tests/integration/test_scheduler_defer_fifo_simple.py": 18.26,
-  "tests/integration/test_scheduler_defer_stress.py": 17.74,
-  "tests/integration/test_scheduler_heap_stress.py": 3.89,
-  "tests/integration/test_scheduler_internal_id_no_collision.py": 20.01,
-  "tests/integration/test_scheduler_interval_reschedule.py": 16.29,
-  "tests/integration/test_scheduler_interval_zero_coerced.py": 16.09,
-  "tests/integration/test_scheduler_null_name.py": 14.69,
-  "tests/integration/test_scheduler_numeric_id_test.py": 17.08,
-  "tests/integration/test_scheduler_pool.py": 19.88,
-  "tests/integration/test_scheduler_rapid_cancellation.py": 4.42,
-  "tests/integration/test_scheduler_recursive_timeout.py": 4.3,
-  "tests/integration/test_scheduler_removed_item_race.py": 15.49,
-  "tests/integration/test_scheduler_self_keyed.py": 25.77,
-  "tests/integration/test_scheduler_simultaneous_callbacks.py": 14.84,
-  "tests/integration/test_scheduler_string_test.py": 15.42,
-  "tests/integration/test_script_array_params.py": 12.73,
-  "tests/integration/test_script_delay_params.py": 12.69,
-  "tests/integration/test_script_queued.py": 20.38,
-  "tests/integration/test_script_queued_idle_loop.py": 25.06,
-  "tests/integration/test_script_wait_on_boot.py": 15.67,
-  "tests/integration/test_select_stringref_trigger.py": 19.48,
-  "tests/integration/test_sensor_filters_delta.py": 27.62,
-  "tests/integration/test_sensor_filters_ring_buffer.py": 20.27,
-  "tests/integration/test_sensor_filters_sliding_window.py": 56.28,
-  "tests/integration/test_sensor_filters_value_list.py": 20.6,
-  "tests/integration/test_sensor_timeout_filter.py": 22.21,
-  "tests/integration/test_socket_wake_gate_tcp.py": 16.37,
-  "tests/integration/test_status_flags.py": 29.68,
-  "tests/integration/test_strftime_to.py": 17.42,
-  "tests/integration/test_syslog.py": 18.39,
-  "tests/integration/test_template_alarm_control_panel_many_sensors.py": 25.61,
-  "tests/integration/test_template_text_save.py": 19.16,
-  "tests/integration/test_text_command.py": 16.43,
-  "tests/integration/test_text_sensor_raw_state.py": 17.19,
-  "tests/integration/test_uart_mock_ld2410.py": 37.0,
-  "tests/integration/test_uart_mock_ld2412.py": 40.82,
-  "tests/integration/test_uart_mock_ld2420.py": 32.7,
-  "tests/integration/test_uart_mock_ld2450.py": 32.84,
-  "tests/integration/test_uart_mock_modbus.py": 548.87,
-  "tests/integration/test_udp.py": 16.67,
-  "tests/integration/test_use_address_runtime.py": 27.26,
-  "tests/integration/test_valve_control_action.py": 24.58,
-  "tests/integration/test_varint_five_byte_device_id.py": 22.5,
-  "tests/integration/test_wait_until_mid_loop_timing.py": 22.05,
-  "tests/integration/test_wait_until_on_boot.py": 10.37,
-  "tests/integration/test_wait_until_ordering.py": 18.23,
-  "tests/integration/test_wait_until_reentrant_restart.py": 19.35,
-  "tests/integration/test_wake_loop_forces_phase_b.py": 17.83,
-  "tests/integration/test_water_heater_template.py": 25.7
+  "tests/integration/test_action_concurrent_reentry.py": 30.48,
+  "tests/integration/test_addressable_light_transition.py": 42.1,
+  "tests/integration/test_alarm_control_panel_state_transitions.py": 35.76,
+  "tests/integration/test_api_action_metadata.py": 22.35,
+  "tests/integration/test_api_action_responses.py": 30.31,
+  "tests/integration/test_api_action_timeout.py": 34.73,
+  "tests/integration/test_api_conditional_memory.py": 18.35,
+  "tests/integration/test_api_custom_services.py": 15.99,
+  "tests/integration/test_api_get_time_response_timezone.py": 24.21,
+  "tests/integration/test_api_homeassistant.py": 33.77,
+  "tests/integration/test_api_homeassistant_action_no_subscriber.py": 20.8,
+  "tests/integration/test_api_homeassistant_binary_sensor_initial_state.py": 23.55,
+  "tests/integration/test_api_list_entities_backpressure.py": 23.04,
+  "tests/integration/test_api_message_size_batching.py": 27.31,
+  "tests/integration/test_api_reboot_timeout.py": 29.32,
+  "tests/integration/test_api_string_lambda.py": 14.9,
+  "tests/integration/test_api_vv_logging.py": 26.25,
+  "tests/integration/test_api_zero_psk_provisioning.py": 38.19,
+  "tests/integration/test_areas_and_devices.py": 27.52,
+  "tests/integration/test_automation_wait_actions.py": 24.25,
+  "tests/integration/test_automations.py": 36.02,
+  "tests/integration/test_batch_delay_zero_rapid_transitions.py": 18.46,
+  "tests/integration/test_binary_sensor_autorepeat_filter.py": 17.47,
+  "tests/integration/test_binary_sensor_invalidate_state.py": 14.79,
+  "tests/integration/test_blocking_warning_log_time_not_charged_to_next_operation.py": 21.52,
+  "tests/integration/test_build_info.py": 21.42,
+  "tests/integration/test_camera_mock.py": 17.02,
+  "tests/integration/test_climate_control_action.py": 26.56,
+  "tests/integration/test_climate_custom_modes.py": 18.82,
+  "tests/integration/test_continuation_actions.py": 20.39,
+  "tests/integration/test_cover_control_action.py": 19.91,
+  "tests/integration/test_crc8_helper.py": 16.73,
+  "tests/integration/test_device_id_in_state.py": 58.41,
+  "tests/integration/test_duplicate_entities.py": 30.76,
+  "tests/integration/test_entity_icon.py": 25.34,
+  "tests/integration/test_fan_turn_on_action.py": 23.64,
+  "tests/integration/test_fnv1_hash_object_id.py": 25.44,
+  "tests/integration/test_fnv1a_hash.py": 20.85,
+  "tests/integration/test_gpio_expander_cache.py": 14.42,
+  "tests/integration/test_host_logger_thread_safety.py": 21.31,
+  "tests/integration/test_host_mode_basic.py": 2.65,
+  "tests/integration/test_host_mode_batch_delay.py": 22.21,
+  "tests/integration/test_host_mode_climate_basic_state.py": 27.12,
+  "tests/integration/test_host_mode_climate_control.py": 21.57,
+  "tests/integration/test_host_mode_empty_string_options.py": 27.17,
+  "tests/integration/test_host_mode_entity_fields.py": 30.1,
+  "tests/integration/test_host_mode_fan_preset.py": 17.55,
+  "tests/integration/test_host_mode_many_entities.py": 38.98,
+  "tests/integration/test_host_mode_many_entities_multiple_connections.py": 23.82,
+  "tests/integration/test_host_mode_noise_encryption.py": 39.84,
+  "tests/integration/test_host_mode_reconnect.py": 13.1,
+  "tests/integration/test_host_mode_sensor.py": 22.17,
+  "tests/integration/test_host_ota.py": 92.05,
+  "tests/integration/test_host_preferences.py": 20.29,
+  "tests/integration/test_host_preferences_suspend_resume.py": 15.02,
+  "tests/integration/test_improv_serial_uart.py": 30.15,
+  "tests/integration/test_large_message_batching.py": 25.84,
+  "tests/integration/test_legacy_area.py": 21.24,
+  "tests/integration/test_legacy_climate_compat.py": 17.34,
+  "tests/integration/test_legacy_fan_compat.py": 22.6,
+  "tests/integration/test_light_automations.py": 29.13,
+  "tests/integration/test_light_binary_effect_off_phase.py": 33.99,
+  "tests/integration/test_light_calls.py": 26.81,
+  "tests/integration/test_light_constant_brightness.py": 25.0,
+  "tests/integration/test_light_control_action.py": 25.57,
+  "tests/integration/test_light_dim_relative_action.py": 21.4,
+  "tests/integration/test_light_effect_zero_brightness.py": 19.65,
+  "tests/integration/test_light_initial_state.py": 17.58,
+  "tests/integration/test_light_toggle_action.py": 28.28,
+  "tests/integration/test_lock_automations.py": 23.3,
+  "tests/integration/test_logger_buffered_recursion_guard.py": 22.96,
+  "tests/integration/test_loop_disable_enable.py": 16.18,
+  "tests/integration/test_loop_interval_decoupling.py": 25.19,
+  "tests/integration/test_loop_interval_default_not_pulled_forward.py": 20.59,
+  "tests/integration/test_lvgl_headless_render.py": 87.78,
+  "tests/integration/test_micros_to_millis.py": 18.73,
+  "tests/integration/test_multi_click_trigger.py": 24.2,
+  "tests/integration/test_multi_device_preferences.py": 20.52,
+  "tests/integration/test_noise_encryption_key_protection.py": 19.1,
+  "tests/integration/test_object_id_api_verification.py": 26.24,
+  "tests/integration/test_object_id_friendly_name_no_mac_suffix.py": 14.88,
+  "tests/integration/test_object_id_no_friendly_name.py": 61.27,
+  "tests/integration/test_online_image_auto_detects_image_bmp_mime.py": 82.32,
+  "tests/integration/test_online_image_auto_detects_redirected_image_bmp_mime.py": 46.03,
+  "tests/integration/test_online_image_bmp.py": 34.21,
+  "tests/integration/test_oversized_payloads.py": 62.75,
+  "tests/integration/test_preference_key_stability.py": 26.8,
+  "tests/integration/test_runtime_stats.py": 28.26,
+  "tests/integration/test_safe_mode_loop_runs.py": 18.14,
+  "tests/integration/test_scheduler_blocking_warning.py": 28.7,
+  "tests/integration/test_scheduler_bulk_cleanup.py": 20.73,
+  "tests/integration/test_scheduler_defer_cancel.py": 22.99,
+  "tests/integration/test_scheduler_defer_cancel_regular.py": 21.97,
+  "tests/integration/test_scheduler_defer_fifo_simple.py": 24.15,
+  "tests/integration/test_scheduler_defer_stress.py": 23.11,
+  "tests/integration/test_scheduler_heap_stress.py": 20.2,
+  "tests/integration/test_scheduler_internal_id_no_collision.py": 23.75,
+  "tests/integration/test_scheduler_interval_reschedule.py": 15.32,
+  "tests/integration/test_scheduler_interval_zero_coerced.py": 20.1,
+  "tests/integration/test_scheduler_null_name.py": 17.43,
+  "tests/integration/test_scheduler_numeric_id_test.py": 25.51,
+  "tests/integration/test_scheduler_pool.py": 24.22,
+  "tests/integration/test_scheduler_rapid_cancellation.py": 24.01,
+  "tests/integration/test_scheduler_recursive_timeout.py": 22.94,
+  "tests/integration/test_scheduler_removed_item_race.py": 23.07,
+  "tests/integration/test_scheduler_self_keyed.py": 18.43,
+  "tests/integration/test_scheduler_simultaneous_callbacks.py": 21.99,
+  "tests/integration/test_scheduler_string_test.py": 17.27,
+  "tests/integration/test_script_array_params.py": 4.59,
+  "tests/integration/test_script_delay_params.py": 22.46,
+  "tests/integration/test_script_queued.py": 25.24,
+  "tests/integration/test_script_queued_idle_loop.py": 5.04,
+  "tests/integration/test_script_wait_on_boot.py": 21.77,
+  "tests/integration/test_sdl_headless_screenshot.py": 19.23,
+  "tests/integration/test_select_stringref_trigger.py": 19.31,
+  "tests/integration/test_sensor_filters_delta.py": 25.92,
+  "tests/integration/test_sensor_filters_ring_buffer.py": 22.39,
+  "tests/integration/test_sensor_filters_sliding_window.py": 57.93,
+  "tests/integration/test_sensor_filters_value_list.py": 20.32,
+  "tests/integration/test_sensor_timeout_filter.py": 25.35,
+  "tests/integration/test_snapshot_display.py": 19.7,
+  "tests/integration/test_socket_wake_gate_tcp.py": 14.5,
+  "tests/integration/test_status_flags.py": 33.83,
+  "tests/integration/test_strftime_to.py": 17.64,
+  "tests/integration/test_syslog.py": 24.49,
+  "tests/integration/test_template_alarm_control_panel_many_sensors.py": 24.81,
+  "tests/integration/test_template_climate_basic.py": 15.28,
+  "tests/integration/test_template_climate_custom_modes.py": 25.07,
+  "tests/integration/test_template_climate_nonoptimistic.py": 24.25,
+  "tests/integration/test_template_climate_on_control_ordering.py": 24.09,
+  "tests/integration/test_template_climate_publish_all_fields.py": 17.78,
+  "tests/integration/test_template_climate_sensor_push.py": 17.42,
+  "tests/integration/test_template_climate_set_actions.py": 23.63,
+  "tests/integration/test_template_climate_two_point_temperature.py": 25.19,
+  "tests/integration/test_template_text_save.py": 17.88,
+  "tests/integration/test_text_command.py": 22.71,
+  "tests/integration/test_text_sensor_raw_state.py": 25.17,
+  "tests/integration/test_uart_mock_ld2410.py": 58.15,
+  "tests/integration/test_uart_mock_ld2412.py": 61.14,
+  "tests/integration/test_uart_mock_ld2420.py": 33.87,
+  "tests/integration/test_uart_mock_ld2450.py": 26.06,
+  "tests/integration/test_uart_mock_modbus.py": 391.79,
+  "tests/integration/test_udp.py": 7.38,
+  "tests/integration/test_use_address_runtime.py": 24.09,
+  "tests/integration/test_valve_control_action.py": 23.22,
+  "tests/integration/test_varint_five_byte_device_id.py": 17.93,
+  "tests/integration/test_wait_until_mid_loop_timing.py": 22.26,
+  "tests/integration/test_wait_until_on_boot.py": 17.46,
+  "tests/integration/test_wait_until_ordering.py": 11.89,
+  "tests/integration/test_wait_until_reentrant_restart.py": 22.88,
+  "tests/integration/test_wake_loop_forces_phase_b.py": 16.6,
+  "tests/integration/test_water_heater_template.py": 19.66
 }

tests/integration/test_api_zero_psk_provisioning.py

@@ -24,7 +24,6 @@ from .types import (
     RunCompiledFunction,
 )
 
-pytestmark = pytest.mark.usefixtures("isolated_preferences")
 NEW_KEY = PROVISIONING_PSK
 
 

tests/integration/test_host_preferences_suspend_resume.py

@@ -41,15 +41,6 @@ async def _poll_until_exists(path: Path) -> None:
         await asyncio.sleep(0.05)
 
 
-@pytest.fixture(autouse=True)
-def isolated_preferences(monkeypatch: pytest.MonkeyPatch, tmp_path) -> Path:
-    """Keep host preferences per-test so this test never touches the real
-    ~/.esphome/prefs and never races other tests over ESPHOME_PREFDIR."""
-    prefdir = tmp_path / "prefs"
-    monkeypatch.setenv("ESPHOME_PREFDIR", str(prefdir))
-    return prefdir / f"{DEVICE_NAME}.prefs"
-
-
 @pytest.mark.asyncio
 async def test_host_preferences_suspend_resume(
     yaml_config: str,
@@ -58,7 +49,7 @@ async def test_host_preferences_suspend_resume(
     isolated_preferences: Path,
 ) -> None:
     """Test that a running syncer flushes, a suspended one doesn't, and resume restores flushing."""
-    pref_file = isolated_preferences
+    pref_file = isolated_preferences / f"{DEVICE_NAME}.prefs"
 
     loop = asyncio.get_running_loop()
     saved_in_memory = loop.create_future()

tests/integration/test_light_initial_state.py

@@ -11,14 +11,6 @@ from .state_utils import InitialStateHelper, require_entity
 from .types import APIClientConnectedFactory, RunCompiledFunction
 
 
-@pytest.fixture(autouse=True)
-def isolated_preferences(monkeypatch: pytest.MonkeyPatch, tmp_path) -> None:
-    """Keep host preferences per-test so RESTORE_AND_ON never loads a stale value left
-    behind by a previous run (host preferences otherwise persist to ~/.esphome/prefs,
-    keyed only by device name)."""
-    monkeypatch.setenv("ESPHOME_PREFDIR", str(tmp_path / "prefs"))
-
-
 @pytest.mark.asyncio
 async def test_light_initial_state(
     yaml_config: str,

tests/integration/test_uart_mock_modbus.py

@@ -173,6 +173,7 @@ async def test_uart_mock_modbus_no_threshold(
         _assert_no_modbus_errors(error_log_lines, warning_log_lines)
 
 
+@pytest.mark.shared_yaml("uart_mock_modbus_server_injected")
 @pytest.mark.asyncio
 async def test_uart_mock_modbus_server(
     yaml_config: str,
@@ -203,6 +204,7 @@ async def test_uart_mock_modbus_server(
         _assert_no_modbus_errors(error_log_lines, warning_log_lines)
 
 
+@pytest.mark.shared_yaml("uart_mock_modbus_server_injected")
 @pytest.mark.asyncio
 async def test_uart_mock_modbus_server_read_write(
     yaml_config: str,
@@ -231,8 +233,8 @@ async def test_uart_mock_modbus_server_read_write(
             "rw_write_1": 4660,  # 0x1234 written to reg 0x0001
             "rw_read_1": 4660,  # reg 0x0001 reads back the just-written value
             "rw_read_2": 170,  # 0x00AA read from reg 0x0002 in the same request
-            "rw_write_3": 22136,  # 0x5678 written to reg 0x0003
-            "rw_read_3": 22136,  # reg 0x0003 reads back the just-written value
+            "rw_write_3": 22136,  # 0x5678 written to reg 0x0006
+            "rw_read_3": 22136,  # reg 0x0006 reads back the just-written value
         }
     )
 
@@ -241,7 +243,8 @@ async def test_uart_mock_modbus_server_read_write(
         api_client_connected() as client,
     ):
         await tracker.setup_and_start_scenario(client)
-        await tracker.await_all(futures)
+        # The FC 0x17 injections fire last, behind four earlier 100ms delays
+        await tracker.await_all(futures, timeout=4.0)
         _assert_no_modbus_errors(error_log_lines, warning_log_lines)
 
 
@@ -296,6 +299,7 @@ async def test_uart_mock_modbus_server_read_write_invalid(
     )
 
 
+@pytest.mark.shared_yaml("uart_mock_modbus_mesh")
 @pytest.mark.asyncio
 async def test_uart_mock_modbus_server_controller(
     yaml_config: str,
@@ -485,6 +489,7 @@ async def test_uart_mock_modbus_server_controller_bits(
         _assert_no_modbus_errors(error_log_lines, warning_log_lines)
 
 
+@pytest.mark.shared_yaml("uart_mock_modbus_mesh")
 @pytest.mark.asyncio
 async def test_uart_mock_modbus_server_controller_multiple(
     yaml_config: str,
@@ -495,7 +500,7 @@ async def test_uart_mock_modbus_server_controller_multiple(
 
     line_callback, error_log_lines, warning_log_lines = _make_modbus_line_callback()
 
-    expected_values = {"reg_u_word": 919, "reg_u_word_2": 929}
+    expected_values = {"multi_reg_a": 919, "multi_reg_b": 929}
     tracker = SensorTracker(list(expected_values.keys()))
     futures = tracker.expect_all(expected_values)
 
@@ -706,6 +711,7 @@ async def test_uart_mock_modbus_shared_address(
         _assert_no_modbus_errors(error_log_lines, warning_log_lines)
 
 
+@pytest.mark.shared_yaml("uart_mock_modbus_loopback")
 @pytest.mark.asyncio
 async def test_uart_mock_modbus_custom_pdu(
     yaml_config: str,
@@ -932,6 +938,7 @@ async def test_uart_mock_modbus_broadcast_write(
         _assert_no_modbus_errors(error_log_lines, warning_log_lines)
 
 
+@pytest.mark.shared_yaml("uart_mock_modbus_mesh")
 @pytest.mark.asyncio
 async def test_uart_mock_modbus_client_read_write(
     yaml_config: str,
@@ -947,9 +954,7 @@ async def test_uart_mock_modbus_client_read_write(
     """
     line_callback, error_log_lines, warning_log_lines = _make_modbus_line_callback()
 
-    tracker = SensorTracker(
-        ["srv_write_1", "srv_read_1", "client_read_0", "client_read_1"]
-    )
+    tracker = SensorTracker(["srv_write_1", "client_read_0", "client_read_1"])
     futures = tracker.expect_all(
         {
             "srv_write_1": 4660,  # server wrote 0x1234 to reg 0x0001
@@ -967,6 +972,7 @@ async def test_uart_mock_modbus_client_read_write(
         _assert_no_modbus_errors(error_log_lines, warning_log_lines)
 
 
+@pytest.mark.shared_yaml("uart_mock_modbus_loopback")
 @pytest.mark.asyncio
 async def test_uart_mock_modbus_register_offset(
     yaml_config: str,
@@ -1022,6 +1028,7 @@ async def test_uart_mock_modbus_register_offset(
         )
 
 
+@pytest.mark.shared_yaml("uart_mock_modbus_loopback")
 @pytest.mark.asyncio
 async def test_uart_mock_modbus_lambda_write(
     yaml_config: str,
@@ -1058,6 +1065,7 @@ async def test_uart_mock_modbus_lambda_write(
         await tracker.await_change(wrote_30, "reg_30", timeout=4.0)
 
 
+@pytest.mark.shared_yaml("uart_mock_modbus_loopback")
 @pytest.mark.asyncio
 async def test_uart_mock_modbus_lambda_invert(
     yaml_config: str,
@@ -1113,6 +1121,7 @@ async def test_uart_mock_modbus_lambda_invert(
         )
 
 
+@pytest.mark.shared_yaml("uart_mock_modbus_loopback")
 @pytest.mark.asyncio
 async def test_uart_mock_modbus_deprecated_write_buffer(
     yaml_config: str,

tests/script/test_helpers.py

@@ -2122,6 +2122,34 @@ def test_get_cpp_changed_components_independent_of_cwd(
     ) == ["time"]
 
 
+def test_fixture_map_includes_shared_yaml_markers() -> None:
+    """Fixtures named only by shared_yaml markers must map to their test file."""
+    helpers.get_fixture_to_test_files.cache_clear()
+    mapping = helpers.get_fixture_to_test_files()
+    for fixture in (
+        "uart_mock_modbus_loopback",
+        "uart_mock_modbus_mesh",
+        "uart_mock_modbus_server_injected",
+    ):
+        assert mapping[fixture] == frozenset(
+            {"tests/integration/test_uart_mock_modbus.py"}
+        )
+
+
+def test_no_orphan_integration_fixtures() -> None:
+    """Every fixture must reach CI test selection; an orphan selects nothing."""
+    helpers.get_fixture_to_test_files.cache_clear()
+    mapping = helpers.get_fixture_to_test_files()
+    fixtures_dir = (Path(__file__).parent.parent / "integration" / "fixtures").resolve()
+    fixtures = list(fixtures_dir.glob("*.yaml"))
+    assert fixtures, f"no fixtures found under {fixtures_dir}"
+    # cache_init is covered via INTEGRATION_TESTS_TRIGGER_FILES instead
+    orphans = [
+        f.stem for f in fixtures if f.stem != "cache_init" and f.stem not in mapping
+    ]
+    assert not orphans, f"fixtures invisible to CI test selection: {orphans}"
+
+
 def test_lpt_partition_balances_skewed_weights() -> None:
     """Heavy items spread across groups instead of clustering."""
     items = [f"i{n}" for n in range(6)]

tests/script/test_platformio_install_deps.py

@@ -35,8 +35,8 @@ def _load_script():
 def test_spec_key_collapses_destinations() -> None:
     """Two specs delivering one package share a directory and one key."""
     mod = _load_script()
-    assert mod.spec_key("esphome/noise-c @ 0.1.24") == "noise-c"
-    assert mod.spec_key("esphome/noise-c@0.1.24") == "noise-c"
+    assert mod.spec_key("esphome/noise-c @ 0.1.26") == "noise-c"
+    assert mod.spec_key("esphome/noise-c@0.1.26") == "noise-c"
     assert mod.spec_key("ESP32Async/AsyncTCP @ ^3.4.10") == mod.spec_key(
         "esp32async/asynctcp @ 3.5.0"
     )
@@ -54,23 +54,23 @@ def test_parse_specs_and_cli_args(tmp_path: Path) -> None:
         "[env:a]\n"
         "platform = fake/platform@1\n"
         "lib_deps =\n"
-        "    esphome/noise-c @ 0.1.24\n"
+        "    esphome/noise-c @ 0.1.26\n"
         "    ${common.lib_deps}\n"
         "    internal_lib\n"
         "[env:b]\n"
         "lib_deps =\n"
-        "    esphome/noise-c @ 0.1.24\n"
+        "    esphome/noise-c @ 0.1.26\n"
     )
     mod = _load_script()
     args = Namespace(libraries=True, platforms=True, tools=False)
     libs, platforms, tools = mod.parse_specs(str(ini), args)
     # exact-string duplicates collapse; distinct version pins survive
-    assert libs == ["esphome/noise-c @ 0.1.24"]
+    assert libs == ["esphome/noise-c @ 0.1.26"]
     assert platforms == ["fake/platform@1"]
     assert tools == []
     assert mod.build_cli_args(libs, platforms, tools) == [
         "-l",
-        "esphome/noise-c @ 0.1.24",
+        "esphome/noise-c @ 0.1.26",
         "-p",
         "fake/platform@1",
     ]
@@ -162,13 +162,13 @@ def test_parallel_install_behavior(tmp_path: Path) -> None:
     mod.parallel_install(
         cls,
         [
-            "esphome/noise-c @ 0.1.24",
-            "esphome/noise-c @ 0.1.24",
+            "esphome/noise-c @ 0.1.26",
+            "esphome/noise-c @ 0.1.26",
             "esphome/already @ 1.0",
             "https://x/framework.tar.xz",
         ],
     )
-    assert cls.calls == ["esphome/noise-c @ 0.1.24"]
+    assert cls.calls == ["esphome/noise-c @ 0.1.26"]
     assert cls.lock_events == ["lock", "unlock"]
 
 
@@ -205,7 +205,7 @@ def test_parallel_install_runs_dependency_waves(tmp_path: Path) -> None:
     mod = _load_script()
     cls = _reset_fake(str(tmp_path))
     cls.deps = {
-        "esphome/noise-c @ 0.1.24": [
+        "esphome/noise-c @ 0.1.26": [
             {"owner": "esphome", "name": "libsodium", "version": "^1.0"},
             {"name": "SPI"},
         ],
@@ -213,12 +213,12 @@ def test_parallel_install_runs_dependency_waves(tmp_path: Path) -> None:
             {"owner": "esphome", "name": "libsodium", "version": "^1.0"},
         ],
     }
-    mod.parallel_install(cls, ["esphome/noise-c @ 0.1.24", "esphome/wg @ 1.0"])
+    mod.parallel_install(cls, ["esphome/noise-c @ 0.1.26", "esphome/wg @ 1.0"])
     assert len(cls.calls) == 3  # the shared dep installs exactly once
     assert {mod.spec_key(c) for c in cls.calls} == {"noise-c", "wg", "libsodium"}
     # Wave-1 strings carry no compatibility; the dependency wave does
     compats = dict(cls.compat_calls)
-    assert compats["esphome/noise-c @ 0.1.24"] is None
+    assert compats["esphome/noise-c @ 0.1.26"] is None
     dep_compat = next(v for k, v in cls.compat_calls if "libsodium" in k)
     assert dep_compat is not None  # mirrors pio's install_dependency
 
@@ -229,11 +229,11 @@ def test_dependency_wave_excludes_url_specs(tmp_path: Path) -> None:
     mod = _load_script()
     cls = _reset_fake(str(tmp_path))
     cls.deps = {
-        "esphome/noise-c @ 0.1.24": [
+        "esphome/noise-c @ 0.1.26": [
             {"name": "vendored", "version": "https://github.com/x/y.git"},
         ],
     }
-    mod.parallel_install(cls, ["esphome/noise-c @ 0.1.24"])
+    mod.parallel_install(cls, ["esphome/noise-c @ 0.1.26"])
     assert {mod.spec_key(c) for c in cls.calls} == {"noise-c"}
 
 
@@ -348,13 +348,13 @@ def test_warm_store_still_walks_dependencies(tmp_path: Path) -> None:
     """Already-installed top-level packages still feed the dependency
     wave; a warm store can be missing a transitive dep."""
     mod = _load_script()
-    cls = _reset_fake(str(tmp_path), installed={"esphome/noise-c @ 0.1.24"})
+    cls = _reset_fake(str(tmp_path), installed={"esphome/noise-c @ 0.1.26"})
     cls.deps = {
-        "esphome/noise-c @ 0.1.24": [
+        "esphome/noise-c @ 0.1.26": [
             {"owner": "esphome", "name": "libsodium", "version": "^1.0"},
         ],
     }
-    mod.parallel_install(cls, ["esphome/noise-c @ 0.1.24"])
+    mod.parallel_install(cls, ["esphome/noise-c @ 0.1.26"])
     assert [mod.spec_key(c) for c in cls.calls] == ["libsodium"]
 
 

tests/script/test_setup.py

@@ -0,0 +1,562 @@
+"""Tests for script/setup.py."""
+
+import importlib.util
+import os
+from pathlib import Path, PurePosixPath, PureWindowsPath
+import runpy
+import sys
+from types import ModuleType
+from unittest.mock import Mock, call, patch
+
+import pytest
+
+_SCRIPT = Path(__file__).parents[2] / "script" / "setup.py"
+
+
+def _load_module() -> ModuleType:
+    spec = importlib.util.spec_from_file_location("script_setup", _SCRIPT)
+    module = importlib.util.module_from_spec(spec)
+    spec.loader.exec_module(module)
+    return module
+
+
+@pytest.fixture
+def script_setup() -> ModuleType:
+    """Fresh import of script/setup.py, isolated from other tests."""
+    return _load_module()
+
+
+# --- bin_dir / venv_python / activate_hint -----------------------------------
+
+
+def test_bin_dir_matches_host_layout(script_setup: ModuleType, tmp_path: Path) -> None:
+    """The venv scheme resolves to Scripts on Windows and bin everywhere else."""
+    expected = "Scripts" if os.name == "nt" else "bin"
+    assert script_setup.bin_dir(tmp_path) == tmp_path / expected
+
+
+# Both flavours are exercised on every host. Pure paths are used because a real
+# Path refuses to change flavour: PosixPath cannot be built on Windows, and
+# WindowsPath cannot be built on Unix.
+
+
+def test_venv_python_posix(script_setup: ModuleType, tmp_path: Path) -> None:
+    with (
+        patch.object(
+            script_setup, "bin_dir", return_value=PurePosixPath("/x/venv/bin")
+        ),
+        patch.object(script_setup.os, "name", "posix"),
+    ):
+        result = script_setup.venv_python(tmp_path)
+    assert result == PurePosixPath("/x/venv/bin/python")
+
+
+def test_venv_python_nt(script_setup: ModuleType, tmp_path: Path) -> None:
+    with (
+        patch.object(
+            script_setup, "bin_dir", return_value=PureWindowsPath(r"C:\x\venv\Scripts")
+        ),
+        patch.object(script_setup.os, "name", "nt"),
+    ):
+        result = script_setup.venv_python(tmp_path)
+    assert result == PureWindowsPath(r"C:\x\venv\Scripts\python.exe")
+
+
+def test_activate_hint_posix(script_setup: ModuleType) -> None:
+    with (
+        patch.object(script_setup, "ROOT", PurePosixPath("/x")),
+        patch.object(
+            script_setup, "bin_dir", return_value=PurePosixPath("/x/venv/bin")
+        ),
+        patch.object(script_setup.os, "name", "posix"),
+    ):
+        hint = script_setup.activate_hint()
+    assert hint == "source venv/bin/activate"
+
+
+def test_activate_hint_nt(script_setup: ModuleType) -> None:
+    with (
+        patch.object(script_setup, "ROOT", PureWindowsPath(r"C:\x")),
+        patch.object(
+            script_setup, "bin_dir", return_value=PureWindowsPath(r"C:\x\venv\Scripts")
+        ),
+        patch.object(script_setup.os, "name", "nt"),
+    ):
+        hint = script_setup.activate_hint()
+    # The nt branch returns str(activate) as-is, skipping the "source " prefix.
+    assert hint == r"venv\Scripts\activate"
+
+
+# --- run -----------------------------------------------------------------
+
+
+def test_run_success(script_setup: ModuleType) -> None:
+    with patch.object(
+        script_setup.subprocess, "run", return_value=Mock(returncode=0)
+    ) as mock_run:
+        script_setup.run(["echo", "hi"])
+    mock_run.assert_called_once_with(
+        ["echo", "hi"], cwd=script_setup.ROOT, env=None, check=False
+    )
+
+
+def test_run_failure_raises_system_exit_with_code(
+    script_setup: ModuleType, capsys: pytest.CaptureFixture[str]
+) -> None:
+    with (
+        patch.object(script_setup.subprocess, "run", return_value=Mock(returncode=7)),
+        pytest.raises(SystemExit) as excinfo,
+    ):
+        script_setup.run(["false"])
+    assert excinfo.value.code == 7
+    assert "Failed with exit code 7: false" in capsys.readouterr().err
+
+
+# --- git_output ------------------------------------------------------------
+
+
+def test_git_output_success_strips_stdout(script_setup: ModuleType) -> None:
+    with patch.object(
+        script_setup.subprocess,
+        "run",
+        return_value=Mock(returncode=0, stdout="  /repo/.git \n"),
+    ) as mock_run:
+        result = script_setup.git_output("rev-parse", "--absolute-git-dir")
+    assert result == "/repo/.git"
+    mock_run.assert_called_once_with(
+        ["git", "rev-parse", "--absolute-git-dir"],
+        cwd=script_setup.ROOT,
+        capture_output=True,
+        text=True,
+        check=False,
+    )
+
+
+def test_git_output_nonzero_returncode_is_empty(script_setup: ModuleType) -> None:
+    with patch.object(
+        script_setup.subprocess,
+        "run",
+        return_value=Mock(returncode=1, stdout="whatever"),
+    ):
+        assert script_setup.git_output("status") == ""
+
+
+def test_git_output_oserror_is_empty(script_setup: ModuleType) -> None:
+    with patch.object(script_setup.subprocess, "run", side_effect=OSError("no git")):
+        assert script_setup.git_output("status") == ""
+
+
+# --- create_venv -----------------------------------------------------------
+
+
+def test_create_venv_uses_uv_when_present(
+    script_setup: ModuleType, tmp_path: Path
+) -> None:
+    venv = tmp_path / "venv"
+    with (
+        patch.object(script_setup.shutil, "which", return_value="/usr/bin/uv"),
+        patch.object(
+            script_setup.subprocess, "run", return_value=Mock(returncode=0)
+        ) as mock_run,
+    ):
+        script_setup.create_venv(venv)
+    mock_run.assert_called_once_with(
+        ["/usr/bin/uv", "venv", "--clear", "--seed", str(venv)],
+        cwd=script_setup.ROOT,
+        env=None,
+        check=False,
+    )
+
+
+def test_create_venv_falls_back_to_venv_module(
+    script_setup: ModuleType, tmp_path: Path
+) -> None:
+    venv = tmp_path / "venv"
+    with (
+        patch.object(script_setup.shutil, "which", return_value=None),
+        patch.object(
+            script_setup.subprocess, "run", return_value=Mock(returncode=0)
+        ) as mock_run,
+    ):
+        script_setup.create_venv(venv)
+    mock_run.assert_called_once_with(
+        [sys.executable, "-m", "venv", "--clear", str(venv)],
+        cwd=script_setup.ROOT,
+        env=None,
+        check=False,
+    )
+
+
+# --- venv_environment --------------------------------------------------------
+
+
+def test_venv_environment_sets_virtual_env_and_prepends_path(
+    script_setup: ModuleType, tmp_path: Path, monkeypatch: pytest.MonkeyPatch
+) -> None:
+    venv = tmp_path / "venv"
+    monkeypatch.setenv("PYTHONHOME", "/somewhere")
+    monkeypatch.setenv("PATH", "/usr/bin:/bin")
+    env = script_setup.venv_environment(venv)
+    assert env["VIRTUAL_ENV"] == str(venv)
+    assert "PYTHONHOME" not in env
+    expected_prefix = str(script_setup.bin_dir(venv)) + os.pathsep
+    assert env["PATH"] == expected_prefix + "/usr/bin:/bin"
+
+
+def test_venv_environment_path_fallback_when_unset(
+    script_setup: ModuleType, tmp_path: Path, monkeypatch: pytest.MonkeyPatch
+) -> None:
+    venv = tmp_path / "venv"
+    monkeypatch.delenv("PATH", raising=False)
+    env = script_setup.venv_environment(venv)
+    # No trailing separator: an empty PATH entry means "search the cwd".
+    assert env["PATH"] == str(script_setup.bin_dir(venv))
+
+
+# --- find_uv -----------------------------------------------------------------
+
+
+def test_find_uv_found_immediately(script_setup: ModuleType, tmp_path: Path) -> None:
+    venv = tmp_path / "venv"
+    env = {"PATH": "/usr/bin"}
+    with (
+        patch.object(script_setup.shutil, "which", return_value="/usr/bin/uv"),
+        patch.object(script_setup.subprocess, "run") as mock_run,
+    ):
+        result = script_setup.find_uv(venv, env)
+    assert result == "/usr/bin/uv"
+    mock_run.assert_not_called()
+
+
+def test_find_uv_installed_then_found(script_setup: ModuleType, tmp_path: Path) -> None:
+    venv = tmp_path / "venv"
+    env = {"PATH": "/usr/bin"}
+    with (
+        patch.object(script_setup.shutil, "which", side_effect=[None, "/usr/bin/uv"]),
+        patch.object(
+            script_setup.subprocess, "run", return_value=Mock(returncode=0)
+        ) as mock_run,
+    ):
+        result = script_setup.find_uv(venv, env)
+    assert result == "/usr/bin/uv"
+    mock_run.assert_called_once_with(
+        [str(script_setup.venv_python(venv)), "-m", "pip", "install", "uv"],
+        cwd=script_setup.ROOT,
+        env=env,
+        check=False,
+    )
+
+
+def test_find_uv_still_missing_raises_system_exit(
+    script_setup: ModuleType, tmp_path: Path
+) -> None:
+    venv = tmp_path / "venv"
+    env = {"PATH": "/usr/bin"}
+    with (
+        patch.object(script_setup.shutil, "which", side_effect=[None, None]),
+        patch.object(script_setup.subprocess, "run", return_value=Mock(returncode=0)),
+        pytest.raises(SystemExit, match="uv could not be installed"),
+    ):
+        script_setup.find_uv(venv, env)
+
+
+# --- install_dependencies -----------------------------------------------------
+
+
+def test_install_dependencies_installs_setuptools_then_project(
+    script_setup: ModuleType, tmp_path: Path
+) -> None:
+    venv = tmp_path / "venv"
+    env = {"PATH": "/usr/bin"}
+    with (
+        patch.object(script_setup.shutil, "which", return_value="/usr/bin/uv"),
+        patch.object(
+            script_setup.subprocess, "run", return_value=Mock(returncode=0)
+        ) as mock_run,
+    ):
+        script_setup.install_dependencies(venv, env)
+    assert mock_run.call_args_list == [
+        call(
+            ["/usr/bin/uv", "pip", "install", "setuptools", "wheel"],
+            cwd=script_setup.ROOT,
+            env=env,
+            check=False,
+        ),
+        call(
+            [
+                "/usr/bin/uv",
+                "pip",
+                "install",
+                "-e",
+                ".[dev,test]",
+                "--config-settings",
+                "editable_mode=compat",
+            ],
+            cwd=script_setup.ROOT,
+            env=env,
+            check=False,
+        ),
+    ]
+
+
+# --- install_git_hooks ---------------------------------------------------------
+
+
+def _fake_git_output(git_dir: str, common_dir: str):
+    def _run(*args: str) -> str:
+        if "--absolute-git-dir" in args:
+            return git_dir
+        return common_dir
+
+    return _run
+
+
+def test_install_git_hooks_returns_early_when_git_dir_empty(
+    script_setup: ModuleType,
+) -> None:
+    env = {"PATH": "/usr/bin"}
+    with (
+        patch.object(
+            script_setup, "git_output", side_effect=_fake_git_output("", "/repo/.git")
+        ),
+        patch.object(script_setup.subprocess, "run") as mock_run,
+    ):
+        script_setup.install_git_hooks(env)
+    mock_run.assert_not_called()
+
+
+def test_install_git_hooks_returns_early_when_common_dir_empty(
+    script_setup: ModuleType,
+) -> None:
+    env = {"PATH": "/usr/bin"}
+    with (
+        patch.object(
+            script_setup, "git_output", side_effect=_fake_git_output("/repo/.git", "")
+        ),
+        patch.object(script_setup.subprocess, "run") as mock_run,
+    ):
+        script_setup.install_git_hooks(env)
+    mock_run.assert_not_called()
+
+
+def test_install_git_hooks_returns_early_for_worktree(
+    script_setup: ModuleType,
+) -> None:
+    """A worktree's git-dir differs from the shared common-dir."""
+    env = {"PATH": "/usr/bin"}
+    with (
+        patch.object(
+            script_setup,
+            "git_output",
+            side_effect=_fake_git_output("/repo/.git/worktrees/wt", "/repo/.git"),
+        ),
+        patch.object(script_setup.subprocess, "run") as mock_run,
+    ):
+        script_setup.install_git_hooks(env)
+    mock_run.assert_not_called()
+
+
+def test_install_git_hooks_missing_prek_raises_system_exit(
+    script_setup: ModuleType,
+) -> None:
+    env = {"PATH": "/usr/bin"}
+    with (
+        patch.object(
+            script_setup,
+            "git_output",
+            side_effect=_fake_git_output("/repo/.git", "/repo/.git"),
+        ),
+        patch.object(script_setup.shutil, "which", return_value=None),
+        patch.object(script_setup.subprocess, "run") as mock_run,
+        pytest.raises(SystemExit, match="prek was not installed"),
+    ):
+        script_setup.install_git_hooks(env)
+    mock_run.assert_not_called()
+
+
+def test_install_git_hooks_happy_path_installs_hook(
+    script_setup: ModuleType, tmp_path: Path
+) -> None:
+    env = {"PATH": "/usr/bin"}
+    common_dir = tmp_path / "repo" / ".git"
+    hooks_dir = common_dir / "hooks"
+    hooks_dir.mkdir(parents=True)
+    source_hook = tmp_path / "post-checkout"
+    source_hook.write_text("#!/bin/sh\necho post-checkout\n")
+
+    with (
+        patch.object(script_setup, "POST_CHECKOUT_HOOK", source_hook),
+        patch.object(
+            script_setup,
+            "git_output",
+            side_effect=_fake_git_output(str(common_dir), str(common_dir)),
+        ),
+        patch.object(script_setup.shutil, "which", return_value="/usr/bin/prek"),
+        patch.object(
+            script_setup.subprocess, "run", return_value=Mock(returncode=0)
+        ) as mock_run,
+    ):
+        script_setup.install_git_hooks(env)
+
+    mock_run.assert_called_once_with(
+        ["/usr/bin/prek", "install", "--overwrite"],
+        cwd=script_setup.ROOT,
+        env=env,
+        check=False,
+    )
+    installed = hooks_dir / "post-checkout"
+    assert installed.read_text() == source_hook.read_text()
+    if os.name != "nt":
+        # Windows has no POSIX permission bits for chmod to set.
+        assert (installed.stat().st_mode & 0o777) == 0o755
+
+
+def test_install_git_hooks_skips_copy_when_hooks_dir_missing(
+    script_setup: ModuleType, tmp_path: Path
+) -> None:
+    """The prek install still runs when the hooks directory does not exist."""
+    env = {"PATH": "/usr/bin"}
+    common_dir = tmp_path / "repo" / ".git"
+    common_dir.mkdir(parents=True)  # no "hooks" subdirectory created
+
+    with (
+        patch.object(
+            script_setup,
+            "git_output",
+            side_effect=_fake_git_output(str(common_dir), str(common_dir)),
+        ),
+        patch.object(script_setup.shutil, "which", return_value="/usr/bin/prek"),
+        patch.object(
+            script_setup.subprocess, "run", return_value=Mock(returncode=0)
+        ) as mock_run,
+    ):
+        script_setup.install_git_hooks(env)
+
+    mock_run.assert_called_once()
+    assert not (common_dir / "hooks").exists()
+
+
+# --- report ------------------------------------------------------------------
+
+
+def test_report_active_state(
+    script_setup: ModuleType, capsys: pytest.CaptureFixture
+) -> None:
+    venv = Path("/opt/esphome-venv")
+    script_setup.report(script_setup.VENV_ACTIVE, venv)
+    out = capsys.readouterr().out
+    assert "Dependencies installed into the active virtual environment:" in out
+    assert str(venv) in out
+    assert "is already active in this shell" in out
+
+
+def test_report_reused_state(
+    script_setup: ModuleType, capsys: pytest.CaptureFixture
+) -> None:
+    script_setup.report(script_setup.VENV_REUSED, script_setup.DEFAULT_VENV)
+    out = capsys.readouterr().out
+    assert "Dependencies updated in the existing ./venv" in out
+
+
+def test_report_created_state(
+    script_setup: ModuleType, capsys: pytest.CaptureFixture
+) -> None:
+    script_setup.report(script_setup.VENV_CREATED, script_setup.DEFAULT_VENV)
+    out = capsys.readouterr().out
+    assert "Virtual environment created at ./venv" in out
+
+
+# --- main --------------------------------------------------------------------
+
+
+def test_main_raises_system_exit_when_python_too_old(
+    script_setup: ModuleType,
+) -> None:
+    with (
+        patch.object(script_setup.sys, "version_info", (3, 11, 5)),
+        pytest.raises(SystemExit, match="ESPHome needs Python 3.12"),
+    ):
+        script_setup.main()
+
+
+def test_main_uses_active_virtual_env(
+    script_setup: ModuleType, tmp_path: Path, monkeypatch: pytest.MonkeyPatch
+) -> None:
+    active_venv = tmp_path / "active-venv"
+    monkeypatch.setenv("VIRTUAL_ENV", str(active_venv))
+    with (
+        patch.object(script_setup, "ROOT", tmp_path),
+        patch.object(script_setup, "create_venv") as mock_create_venv,
+        patch.object(script_setup, "install_dependencies") as mock_install_deps,
+        patch.object(script_setup, "install_git_hooks") as mock_install_hooks,
+        patch.object(script_setup, "report") as mock_report,
+    ):
+        script_setup.main()
+    mock_create_venv.assert_not_called()
+    mock_install_deps.assert_called_once()
+    mock_install_hooks.assert_called_once()
+    mock_report.assert_called_once_with(script_setup.VENV_ACTIVE, active_venv)
+    assert (tmp_path / ".temp").is_dir()
+
+
+def test_main_reuses_existing_venv(
+    script_setup: ModuleType, tmp_path: Path, monkeypatch: pytest.MonkeyPatch
+) -> None:
+    monkeypatch.delenv("VIRTUAL_ENV", raising=False)
+    default_venv = tmp_path / "venv"
+    python_path = script_setup.venv_python(default_venv)
+    python_path.parent.mkdir(parents=True)
+    python_path.touch()
+
+    with (
+        patch.object(script_setup, "ROOT", tmp_path),
+        patch.object(script_setup, "DEFAULT_VENV", default_venv),
+        patch.object(script_setup, "create_venv") as mock_create_venv,
+        patch.object(script_setup, "install_dependencies") as mock_install_deps,
+        patch.object(script_setup, "install_git_hooks") as mock_install_hooks,
+        patch.object(script_setup, "report") as mock_report,
+    ):
+        script_setup.main()
+    mock_create_venv.assert_not_called()
+    mock_install_deps.assert_called_once()
+    mock_install_hooks.assert_called_once()
+    mock_report.assert_called_once_with(script_setup.VENV_REUSED, default_venv)
+    assert (tmp_path / ".temp").is_dir()
+
+
+def test_main_creates_new_venv(
+    script_setup: ModuleType, tmp_path: Path, monkeypatch: pytest.MonkeyPatch
+) -> None:
+    monkeypatch.delenv("VIRTUAL_ENV", raising=False)
+    default_venv = tmp_path / "venv"  # does not exist yet
+
+    with (
+        patch.object(script_setup, "ROOT", tmp_path),
+        patch.object(script_setup, "DEFAULT_VENV", default_venv),
+        patch.object(script_setup, "create_venv") as mock_create_venv,
+        patch.object(script_setup, "install_dependencies") as mock_install_deps,
+        patch.object(script_setup, "install_git_hooks") as mock_install_hooks,
+        patch.object(script_setup, "report") as mock_report,
+    ):
+        script_setup.main()
+    mock_create_venv.assert_called_once_with(default_venv)
+    mock_install_deps.assert_called_once()
+    mock_install_hooks.assert_called_once()
+    mock_report.assert_called_once_with(script_setup.VENV_CREATED, default_venv)
+    assert (tmp_path / ".temp").is_dir()
+
+
+def test_run_as_script_calls_main(tmp_path: Path) -> None:
+    """The __main__ guard runs the whole flow, with every side effect stubbed."""
+    completed = Mock(returncode=0, stdout="")
+    with (
+        patch("subprocess.run", return_value=completed) as mock_run,
+        patch("shutil.which", return_value="/usr/bin/uv"),
+        patch("pathlib.Path.mkdir") as mock_mkdir,
+        patch.dict(os.environ, {"VIRTUAL_ENV": str(tmp_path / "env")}),
+    ):
+        runpy.run_path(str(_SCRIPT), run_name="__main__")
+
+    # The dependency install ran, and git reported no hooks directory to touch.
+    assert mock_run.called
+    mock_mkdir.assert_called_once_with(exist_ok=True)

tests/script/test_sync_dependency_versions.py

@@ -0,0 +1,219 @@
+"""Unit tests for script/sync_dependency_versions.py."""
+
+from pathlib import Path
+import subprocess
+import sys
+
+import pytest
+import yamlrocks
+
+sys.path.insert(0, str((Path(__file__).parent / ".." / ".." / "script").resolve()))
+
+import sync_dependency_versions as sync_mod  # noqa: E402
+
+PRECOMMIT = """\
+# See https://pre-commit.com for more information
+repos:
+  - repo: https://github.com/astral-sh/ruff-pre-commit
+    # Ruff version.
+    rev: v0.1.0
+    hooks:
+      - id: ruff
+  - repo: https://github.com/PyCQA/flake8
+    rev: 7.0.0
+    hooks:
+      - id: flake8
+  - repo: https://github.com/asottile/pyupgrade
+    rev: v3.0.0
+    hooks:
+      - id: pyupgrade
+  - repo: https://github.com/pre-commit/mirrors-clang-format
+    rev: v13.0.1
+    hooks:
+      - id: clang-format
+  - repo: https://github.com/adrienverge/yamllint.git
+    rev: v1.0.0
+    hooks:
+      - id: yamllint
+  - repo: local
+    hooks:
+      - id: pylint
+"""
+
+REQ_TEST = """\
+pylint==4.0.8
+flake8==7.1.0
+ruff==0.2.0  # comment
+pyupgrade==3.0.0
+"""
+
+REQ_DEV = """\
+clang-format==13.0.1
+yamllint==1.0.0
+"""
+
+RUFF_REPO = "https://github.com/astral-sh/ruff-pre-commit"
+DUPLICATE_RUFF_BLOCK = f"  - repo: {RUFF_REPO}\n    rev: v0.3.0\n    hooks: []\n"
+
+EXPECTED_DRIFT = ["ruff: 0.1.0 -> 0.2.0", "flake8: 7.0.0 -> 7.1.0"]
+EXPECTED_PRECOMMIT = PRECOMMIT.replace("rev: v0.1.0", "rev: v0.2.0").replace(
+    "rev: 7.0.0", "rev: 7.1.0"
+)
+
+
+@pytest.fixture
+def root(tmp_path: Path) -> Path:
+    """A fake checkout where ruff (v-prefixed) and flake8 (bare) have drifted."""
+    (tmp_path / ".pre-commit-config.yaml").write_text(PRECOMMIT)
+    (tmp_path / "requirements_test.txt").write_text(REQ_TEST)
+    (tmp_path / "requirements_dev.txt").write_text(REQ_DEV)
+    return tmp_path
+
+
+def _load(text: str) -> object:
+    return yamlrocks.loads(text.encode(), option=yamlrocks.OPT_ROUND_TRIP)
+
+
+@pytest.mark.parametrize(
+    ("requirements", "expected"),
+    [
+        ("prek==0.5.1  # comment\n", "0.5.1"),
+        ("Prek==0.5.1\n", "0.5.1"),
+        ("other==1.0\nprek==0.5.1\n", "0.5.1"),
+        ("prek>=0.5.1\n", None),
+        ("prek-extra==0.5.1\n", None),
+        ("", None),
+    ],
+)
+def test_read_requirement_version(requirements: str, expected: str | None) -> None:
+    assert sync_mod.read_requirement_version(requirements, "prek") == expected
+
+
+def test_find_repo_entry() -> None:
+    entry = sync_mod.find_repo_entry(_load(PRECOMMIT), RUFF_REPO)
+    assert entry["rev"] == "v0.1.0"
+
+
+@pytest.mark.parametrize(
+    ("text", "message"),
+    [
+        ("hooks: []\n", "missing key 'repos'"),
+        ("repos:\n  - rev: 1.0.0\n", "missing key 'repo'"),
+        (PRECOMMIT + DUPLICATE_RUFF_BLOCK, "found 2"),
+        ("repos:\n  - repo: other\n    rev: 1.0.0\n", "found 0"),
+    ],
+)
+def test_find_repo_entry_errors(text: str, message: str) -> None:
+    with pytest.raises(sync_mod.SyncError, match=message):
+        sync_mod.find_repo_entry(_load(text), RUFF_REPO)
+
+
+@pytest.mark.parametrize(
+    ("rev", "expected"),
+    [("v0.1.0", ("v", "0.1.0")), ("7.0.0", ("", "7.0.0")), ("'1.0'", ("", "1.0"))],
+)
+def test_current_rev(rev: str, expected: tuple[str, str]) -> None:
+    doc = _load(f"repos:\n  - repo: {RUFF_REPO}\n    rev: {rev}\n")
+    assert sync_mod.current_rev(doc["repos"][0], RUFF_REPO) == expected
+
+
+@pytest.mark.parametrize(
+    ("block", "message"),
+    [("    hooks: []\n", "has no rev"), ("    rev: 1.0\n", "not a string: 1.0")],
+)
+def test_current_rev_errors(block: str, message: str) -> None:
+    doc = _load(f"repos:\n  - repo: {RUFF_REPO}\n{block}")
+    with pytest.raises(sync_mod.SyncError, match=message):
+        sync_mod.current_rev(doc["repos"][0], RUFF_REPO)
+
+
+def test_sync_reports_without_writing(root: Path) -> None:
+    assert sync_mod.sync(root, write=False) == EXPECTED_DRIFT
+    assert (root / ".pre-commit-config.yaml").read_text() == PRECOMMIT
+
+
+def test_sync_writes_keeps_layout_and_is_idempotent(root: Path) -> None:
+    assert sync_mod.sync(root, write=True) == EXPECTED_DRIFT
+    assert (root / ".pre-commit-config.yaml").read_text() == EXPECTED_PRECOMMIT
+    assert sync_mod.sync(root, write=True) == []
+
+
+def test_sync_does_not_touch_a_config_that_matches(root: Path) -> None:
+    (root / ".pre-commit-config.yaml").write_text(EXPECTED_PRECOMMIT)
+    before = (root / ".pre-commit-config.yaml").stat().st_mtime_ns
+    assert sync_mod.sync(root, write=True) == []
+    assert (root / ".pre-commit-config.yaml").stat().st_mtime_ns == before
+
+
+def test_sync_missing_requirement_pin(root: Path) -> None:
+    (root / "requirements_dev.txt").write_text("")
+    with pytest.raises(sync_mod.SyncError, match="no 'clang-format==' pin"):
+        sync_mod.sync(root, write=True)
+
+
+def test_sync_propagates_config_errors(root: Path) -> None:
+    (root / ".pre-commit-config.yaml").write_text(PRECOMMIT + DUPLICATE_RUFF_BLOCK)
+    with pytest.raises(sync_mod.SyncError, match="found 2"):
+        sync_mod.sync(root, write=True)
+
+
+def test_main_check_reports_drift(
+    root: Path, capsys: pytest.CaptureFixture[str]
+) -> None:
+    assert sync_mod.main(["--check", "--root", str(root)]) == 1
+    assert capsys.readouterr().out.splitlines() == EXPECTED_DRIFT
+    assert (root / ".pre-commit-config.yaml").read_text() == PRECOMMIT
+
+
+def test_main_writes_then_check_is_clean(
+    root: Path, capsys: pytest.CaptureFixture[str]
+) -> None:
+    assert sync_mod.main(["--root", str(root)]) == 0
+    assert capsys.readouterr().out.splitlines() == EXPECTED_DRIFT
+    assert sync_mod.main(["--check", "--root", str(root)]) == 0
+    assert capsys.readouterr().out == ""
+
+
+def test_main_reports_sync_error(
+    root: Path, capsys: pytest.CaptureFixture[str]
+) -> None:
+    (root / "requirements_dev.txt").write_text("")
+    assert sync_mod.main(["--root", str(root)]) == 1
+    assert (
+        "error: requirements_dev.txt: no 'clang-format==' pin"
+        in capsys.readouterr().err
+    )
+
+
+def test_main_defaults_to_repo_root(monkeypatch: pytest.MonkeyPatch) -> None:
+    seen: dict[str, object] = {}
+
+    def fake_sync(root: Path, *, write: bool) -> list[str]:
+        seen["root"] = root
+        seen["write"] = write
+        return []
+
+    monkeypatch.setattr(sync_mod, "sync", fake_sync)
+    assert sync_mod.main([]) == 0
+    assert seen == {"root": sync_mod.REPO_ROOT, "write": True}
+
+
+def test_repository_is_in_sync() -> None:
+    """The real checkout must match; a failure here means a rev has drifted.
+
+    Also proves every SYNC_TARGETS entry still resolves in the real files.
+    """
+    assert sync_mod.sync(sync_mod.REPO_ROOT, write=False) == []
+
+
+def test_cli_entry_point(root: Path) -> None:
+    """Run the script the way the workflow does, as a subprocess."""
+    script = Path(sync_mod.__file__)
+    result = subprocess.run(
+        [sys.executable, str(script), "--check", "--root", str(root)],
+        capture_output=True,
+        text=True,
+        check=False,
+    )
+    assert result.returncode == 1
+    assert result.stdout.splitlines() == EXPECTED_DRIFT

tests/unit_tests/components/udp/test_init.py

@@ -0,0 +1,37 @@
+"""Tests for the udp component configuration schema."""
+
+from __future__ import annotations
+
+import pytest
+
+from esphome.components import udp
+from esphome.components.packet_transport import (
+    CONF_BINARY_SENSORS,
+    CONF_ENCRYPTION,
+    CONF_PING_PONG_ENABLE,
+    CONF_PROVIDERS,
+    CONF_ROLLING_CODE_ENABLE,
+    CONF_SENSORS,
+)
+import esphome.config_validation as cv
+
+
+@pytest.mark.parametrize(
+    "option",
+    [
+        CONF_PROVIDERS,
+        CONF_ENCRYPTION,
+        CONF_PING_PONG_ENABLE,
+        CONF_ROLLING_CODE_ENABLE,
+        CONF_SENSORS,
+        CONF_BINARY_SENSORS,
+    ],
+)
+def test_relocated_option_rejected(option: str) -> None:
+    """Options that moved to packet_transport raise a pointing error."""
+    with pytest.raises(cv.Invalid) as exc_info:
+        udp.CONFIG_SCHEMA({option: True})
+    assert (
+        f"The '{option}' option should now be configured in the 'packet_transport' component"
+        in str(exc_info.value)
+    )

tests/unit_tests/test_config_validation.py

@@ -1394,6 +1394,35 @@ def test_entity_metadata_visibility_hints() -> None:
     assert web["web_server"].visibility is advanced
 
 
+def test_with_visibility_remarks_keys() -> None:
+    """``with_visibility`` re-marks the named keys, preserving each field's
+    default and validator, without touching the other keys or the input schema.
+    """
+    base = cv.Schema(
+        {
+            cv.Optional("a", default=7): cv.int_,
+            cv.Optional("b", visibility=cv.Visibility.ADVANCED): cv.string,
+        }
+    )
+    promoted = cv.with_visibility(base, cv.Visibility.UI, "a")
+
+    pm = {str(k): k for k in promoted.schema}
+    assert pm["a"].visibility is cv.Visibility.UI  # re-marked
+    assert pm["a"].default() == 7  # default preserved
+    assert pm["b"].visibility is cv.Visibility.ADVANCED  # sibling untouched
+    assert promoted({}) == {"a": 7}  # validator/default still applied
+
+    # The input schema is left untouched (no shared-marker mutation).
+    assert {str(k): k for k in base.schema}["a"].visibility is None
+
+
+def test_with_visibility_unknown_key_raises() -> None:
+    """A key not present in the schema is a typo — fail at build time."""
+    base = cv.Schema({cv.Optional("a"): cv.int_})
+    with pytest.raises(ValueError, match="not in schema"):
+        cv.with_visibility(base, cv.Visibility.UI, "nope")
+
+
 def _wrap_str(value: str) -> ESPHomeDataBase:
     """Wrap a raw string as an ESPHomeDataBase, mimicking a YAML-loaded value."""
     return make_data_base(value)

tests/unit_tests/test_espota2.py

@@ -416,6 +416,9 @@ def test_perform_ota_no_auth(
         "Update took 14.00 seconds (prepare 2.00, upload 5.00, commit 7.00)"
         in caplog.text
     )
+    # The data phase timeout must outlast the device's 105 s data timeout
+    mock_socket.settimeout.assert_any_call(espota2.DATA_PHASE_TIMEOUT)
+    assert espota2.DATA_PHASE_TIMEOUT > 105.0
 
 
 @pytest.mark.usefixtures("mock_time")

tests/unit_tests/test_platformio_library.py

@@ -7,6 +7,7 @@ exercised in their own test modules)."""
 import json
 import logging
 from pathlib import Path
+from unittest.mock import Mock
 
 import pytest
 
@@ -228,6 +229,24 @@ def test_resolve_registry_version_raises_without_pkg_file(monkeypatch):
         _resolve_registry_version("owner", "pkg", set())
 
 
+def test_make_registry_client_skips_private_package_probe(monkeypatch):
+    """Our client answers the probe locally without patching PlatformIO's class."""
+    from platformio.account.client import AccountClient
+    from platformio.registry.client import RegistryClient
+
+    pio_probe = RegistryClient.__dict__["allowed_private_packages"]
+    monkeypatch.setattr(
+        AccountClient,
+        "get_account_info",
+        Mock(side_effect=AssertionError("account probe must not run")),
+    )
+
+    client = lib._make_registry_client().get_registry_client_instance()
+
+    assert client.allowed_private_packages() is False
+    assert RegistryClient.__dict__["allowed_private_packages"] is pio_probe
+
+
 def _patch_registry_resolve(monkeypatch: pytest.MonkeyPatch) -> None:
     """Stub the registry lookup so tests never touch the network."""
     monkeypatch.setattr(

tests/unit_tests/test_platformio_prefetch.py

@@ -1225,6 +1225,20 @@ def test_main_runs_prefetch(tmp_path: Path) -> None:
     mock_prefetch.assert_called_once_with(tmp_path, "testenv")
 
 
+def test_main_skips_private_package_probe_before_prefetch(tmp_path: Path) -> None:
+    """The registry probe patch is applied before any package manager runs."""
+    order: list[str] = []
+    with (
+        patch.object(pf, "_prefetch", side_effect=lambda *_: order.append("prefetch")),
+        patch(
+            "esphome.platformio.runner.patch_registry_private_packages",
+            side_effect=lambda: order.append("patch"),
+        ),
+    ):
+        assert pf.main([str(tmp_path), "testenv"]) == 0
+    assert order == ["patch", "prefetch"]
+
+
 def test_main_bad_argv_is_a_distinct_exit(
     caplog: pytest.LogCaptureFixture,
 ) -> None:
@@ -1649,7 +1663,7 @@ def test_preinstall_runs_dependency_waves(tmp_path: Path) -> None:
         {"name": "SPI"},
     ]
     m.dependency_to_spec.side_effect = lambda dep: _FakeSpec(name=dep["name"])
-    pf._preinstall(m, [("noise-c@0.1.24", _FakeSpec(name="noise-c"))])
+    pf._preinstall(m, [("noise-c@0.1.26", _FakeSpec(name="noise-c"))])
     assert installed == ["noise-c", "libsodium"]  # dep deduped, SPI left out
     # The dep wave carries its compatibility so _install searches qualified
     dep_call = m._install.call_args_list[-1]
@@ -1669,7 +1683,7 @@ def test_preinstall_dependency_wave_skips_seen_names(tmp_path: Path) -> None:
     m._install.side_effect = lambda spec, skip_dependencies, compatibility=None: (
         installed.append(getattr(spec, "name", str(spec)))
     )
-    pf._preinstall(m, [("noise-c@0.1.24", _FakeSpec(name="noise-c"))])
+    pf._preinstall(m, [("noise-c@0.1.26", _FakeSpec(name="noise-c"))])
     assert installed == ["noise-c"]
 
 

tests/unit_tests/test_platformio_runner.py

@@ -6,7 +6,9 @@ from collections.abc import Callable
 import io
 import sys
 from types import ModuleType
+from unittest.mock import Mock
 
+from platformio.registry.client import RegistryClient
 import pytest
 
 from esphome.platformio import runner
@@ -30,6 +32,7 @@ def _prepare_main(
     monkeypatch.setattr(sys, "stderr", stream)
     monkeypatch.setattr(runner, "patch_structhash", lambda: None)
     monkeypatch.setattr(runner, "patch_file_downloader", lambda: None)
+    monkeypatch.setattr(runner, "patch_registry_private_packages", lambda: None)
 
     platformio = ModuleType("platformio")
     platformio_main = ModuleType("platformio.__main__")
@@ -91,3 +94,40 @@ def test_main_still_filters_a_drained_partial_line(
 
     assert runner.main() == 0
     assert buf.getvalue() == b""
+
+
+def test_main_applies_registry_private_packages_patch(
+    monkeypatch: pytest.MonkeyPatch,
+) -> None:
+    """The probe is patched before PlatformIO runs."""
+    order: list[str] = []
+    _prepare_main(monkeypatch, lambda: order.append("pio") or 0)
+    monkeypatch.setattr(
+        runner, "patch_registry_private_packages", lambda: order.append("patch")
+    )
+
+    assert runner.main() == 0
+    assert order == ["patch", "pio"]
+
+
+# Snapshot PlatformIO's own probe at import, before any test can patch it
+_PIO_PROBE = RegistryClient.__dict__["allowed_private_packages"]
+
+
+def test_patch_registry_private_packages_skips_account_probe(
+    monkeypatch: pytest.MonkeyPatch,
+) -> None:
+    """Answers False without touching the account client."""
+    from platformio.account.client import AccountClient
+
+    monkeypatch.setattr(RegistryClient, "allowed_private_packages", _PIO_PROBE)
+    monkeypatch.setattr(
+        AccountClient,
+        "get_account_info",
+        Mock(side_effect=AssertionError("account probe must not run")),
+    )
+
+    runner.patch_registry_private_packages()
+
+    assert RegistryClient.allowed_private_packages() is False
+    assert RegistryClient().allowed_private_packages() is False